Sender: LSF System Subject: Job 20983: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Sep 14 19:58:43 2004 Results reported at Tue Sep 14 20:08:31 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v16_66 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.09.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 552.87 sec. Max Memory : 12 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Tue Sep 14 19:58:46 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Sep 14 19:58:52 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/sdsscp/v1_41/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/oraLoader/v1_4/NULL/bin:/opt/oracle/product/9.2.0/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_3/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v16_66/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Tue Sep 14 19:58:52 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v16_66/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_3/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL ORALOADER_DIR=/sdss/ups/prd/oraLoader/v1_4/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_41/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSORACLE_DIR=/sdss/ups/prd/sdssoracle/v1_0/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_lRoGUG --------------------------------------------------------------- --------------------------------------------------------------- Tue Sep 14 19:58:53 CDT 2004 Begin running plate --------------------------------------------------------------- Tue Sep 14 19:58:53 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8c18ad4 makePlates : beginning loop over plObs chain; makePlates : making 69 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1425.par makePlates : plateInfo struct for plate 1969 : (h4).mjd 53437 (h4).raCen 159.9532 (h4).decCen 30.14875 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.953 30.149 159.953 31.649 plMakePlateFromTile : mjd of obs : 53437.621645 Observed HA/dec of plate center, fiducial point (deg) : -24.002 30.123 -24.003 31.623 The rotation angle of the fid. point is 76.397800 plMakePlateFromTile : beginning loop over 1071 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1426.par makePlates : plateInfo struct for plate 1970 : (h4).mjd 53437 (h4).raCen 177.3743 (h4).decCen 40.41482 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.374 40.415 177.374 41.915 plMakePlateFromTile : mjd of obs : 53437.703148 Observed HA/dec of plate center, fiducial point (deg) : -12.002 40.382 -12.003 41.882 The rotation angle of the fid. point is 124.557688 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1427.par makePlates : plateInfo struct for plate 1971 : (h4).mjd 53437 (h4).raCen 188.1848 (h4).decCen 32.29023 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.185 32.290 188.185 33.790 plMakePlateFromTile : mjd of obs : 53437.744166 Observed HA/dec of plate center, fiducial point (deg) : -8.002 32.259 -8.002 33.759 The rotation angle of the fid. point is 83.442876 plMakePlateFromTile : beginning loop over 1262 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1428.par makePlates : plateInfo struct for plate 1972 : (h4).mjd 53437 (h4).raCen 174.678 (h4).decCen 39.89916 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.678 39.899 174.678 41.399 plMakePlateFromTile : mjd of obs : 53437.662428 Observed HA/dec of plate center, fiducial point (deg) : -24.002 39.868 -24.003 41.367 The rotation angle of the fid. point is 102.660175 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1429.par makePlates : plateInfo struct for plate 1973 : (h4).mjd 53437 (h4).raCen 158.0544 (h4).decCen 36.97732 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 158.054 36.977 158.054 38.477 plMakePlateFromTile : mjd of obs : 53437.619164 Observed HA/dec of plate center, fiducial point (deg) : -23.002 36.950 -23.003 38.450 The rotation angle of the fid. point is 95.671328 plMakePlateFromTile : beginning loop over 1306 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1430.par makePlates : plateInfo struct for plate 1974 : (h4).mjd 53437 (h4).raCen 173.107 (h4).decCen 31.59927 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.107 31.599 173.107 33.099 plMakePlateFromTile : mjd of obs : 53437.660846 Observed HA/dec of plate center, fiducial point (deg) : -23.002 31.570 -23.003 33.070 The rotation angle of the fid. point is 80.315738 plMakePlateFromTile : beginning loop over 1183 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1431.par makePlates : plateInfo struct for plate 1975 : (h4).mjd 53437 (h4).raCen 190.9706 (h4).decCen 31.86047 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.971 31.860 190.971 33.360 plMakePlateFromTile : mjd of obs : 53437.746338 Observed HA/dec of plate center, fiducial point (deg) : -10.002 31.830 -10.002 33.329 The rotation angle of the fid. point is 80.924537 plMakePlateFromTile : beginning loop over 1157 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1432.par makePlates : plateInfo struct for plate 1976 : (h4).mjd 53437 (h4).raCen 180.2307 (h4).decCen 40.56802 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.231 40.568 180.231 42.068 plMakePlateFromTile : mjd of obs : 53437.702744 Observed HA/dec of plate center, fiducial point (deg) : -15.002 40.535 -15.003 42.035 The rotation angle of the fid. point is 118.127083 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1433.par makePlates : plateInfo struct for plate 1977 : (h4).mjd 53437 (h4).raCen 200.7389 (h4).decCen 39.29128 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.739 39.291 200.739 40.791 plMakePlateFromTile : mjd of obs : 53437.787241 Observed HA/dec of plate center, fiducial point (deg) : -5.002 39.259 -5.002 40.758 The rotation angle of the fid. point is 146.503760 plMakePlateFromTile : beginning loop over 1290 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1434.par makePlates : plateInfo struct for plate 1978 : (h4).mjd 53437 (h4).raCen 202.9441 (h4).decCen 28.46518 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 202.944 28.465 202.944 29.965 plMakePlateFromTile : mjd of obs : 53437.787810 Observed HA/dec of plate center, fiducial point (deg) : -7.002 28.436 -7.002 29.936 The rotation angle of the fid. point is 52.465345 plMakePlateFromTile : beginning loop over 1191 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1435.par makePlates : plateInfo struct for plate 1979 : (h4).mjd 53437 (h4).raCen 170.4648 (h4).decCen 31.18326 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.465 31.183 170.465 32.683 plMakePlateFromTile : mjd of obs : 53437.661842 Observed HA/dec of plate center, fiducial point (deg) : -20.002 31.155 -20.003 32.654 The rotation angle of the fid. point is 79.259415 plMakePlateFromTile : beginning loop over 1166 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1436.par makePlates : plateInfo struct for plate 1980 : (h4).mjd 53437 (h4).raCen 168.8406 (h4).decCen 39.52836 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.841 39.528 168.841 41.028 plMakePlateFromTile : mjd of obs : 53437.662891 Observed HA/dec of plate center, fiducial point (deg) : -18.002 39.498 -18.003 40.997 The rotation angle of the fid. point is 109.272350 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1437.par makePlates : plateInfo struct for plate 1981 : (h4).mjd 53437 (h4).raCen 162.4231 (h4).decCen 30.30989 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.423 30.310 162.423 31.810 plMakePlateFromTile : mjd of obs : 53437.661738 Observed HA/dec of plate center, fiducial point (deg) : -12.002 30.283 -12.003 31.782 The rotation angle of the fid. point is 73.200199 plMakePlateFromTile : beginning loop over 1227 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1438.par makePlates : plateInfo struct for plate 1982 : (h4).mjd 53437 (h4).raCen 158.7933 (h4).decCen 33.21842 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 158.793 33.218 158.793 34.718 plMakePlateFromTile : mjd of obs : 53437.621207 Observed HA/dec of plate center, fiducial point (deg) : -23.002 33.192 -23.003 34.692 The rotation angle of the fid. point is 84.900893 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1439.par makePlates : plateInfo struct for plate 1983 : (h4).mjd 53437 (h4).raCen 164.3667 (h4).decCen 34.52851 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 164.367 34.529 164.367 36.029 plMakePlateFromTile : mjd of obs : 53437.661582 Observed HA/dec of plate center, fiducial point (deg) : -14.002 34.500 -14.003 36.000 The rotation angle of the fid. point is 94.473702 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1440.par makePlates : plateInfo struct for plate 1984 : (h4).mjd 53437 (h4).raCen 188.5764 (h4).decCen 40.33919 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.576 40.339 188.576 41.839 plMakePlateFromTile : mjd of obs : 53437.745250 Observed HA/dec of plate center, fiducial point (deg) : -8.002 40.306 -8.002 41.805 The rotation angle of the fid. point is 137.037494 plMakePlateFromTile : beginning loop over 1313 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1441.par makePlates : plateInfo struct for plate 1985 : (h4).mjd 53437 (h4).raCen 191.6756 (h4).decCen 40.45678 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.676 40.457 191.676 41.957 plMakePlateFromTile : mjd of obs : 53437.745518 Observed HA/dec of plate center, fiducial point (deg) : -11.002 40.423 -11.002 41.923 The rotation angle of the fid. point is 127.467060 plMakePlateFromTile : beginning loop over 1318 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1442.par makePlates : plateInfo struct for plate 1986 : (h4).mjd 53437 (h4).raCen 186.4736 (h4).decCen 40.22266 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.474 40.223 186.474 41.723 plMakePlateFromTile : mjd of obs : 53437.744970 Observed HA/dec of plate center, fiducial point (deg) : -6.002 40.189 -6.002 41.689 The rotation angle of the fid. point is 145.093270 plMakePlateFromTile : beginning loop over 1290 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1443.par makePlates : plateInfo struct for plate 1987 : (h4).mjd 53437 (h4).raCen 192.4301 (h4).decCen 33.94191 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 192.430 33.942 192.430 35.442 plMakePlateFromTile : mjd of obs : 53437.744838 Observed HA/dec of plate center, fiducial point (deg) : -12.002 33.911 -12.002 35.410 The rotation angle of the fid. point is 93.100532 plMakePlateFromTile : beginning loop over 1299 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1444.par makePlates : plateInfo struct for plate 1988 : (h4).mjd 53437 (h4).raCen 166.0121 (h4).decCen 39.08917 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.012 39.089 166.012 40.589 plMakePlateFromTile : mjd of obs : 53437.660600 Observed HA/dec of plate center, fiducial point (deg) : -16.002 39.059 -16.003 40.559 The rotation angle of the fid. point is 110.985884 plMakePlateFromTile : beginning loop over 1294 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1445.par makePlates : plateInfo struct for plate 1989 : (h4).mjd 53437 (h4).raCen 192.8687 (h4).decCen 38.2484 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 192.869 38.248 192.869 39.748 plMakePlateFromTile : mjd of obs : 53437.746051 Observed HA/dec of plate center, fiducial point (deg) : -12.002 38.216 -12.002 39.715 The rotation angle of the fid. point is 115.488103 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (194.46, 16.44, 2.9) and (193.61, 15.66, 5.5) checkLTHo : distance = 1.146, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(193.61, 15.66, 5.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1446.par makePlates : plateInfo struct for plate 1990 : (h4).mjd 53437 (h4).raCen 165.4645 (h4).decCen 30.4629 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.464 30.463 165.464 31.963 plMakePlateFromTile : mjd of obs : 53437.661848 Observed HA/dec of plate center, fiducial point (deg) : -15.002 30.435 -15.003 31.935 The rotation angle of the fid. point is 75.724750 plMakePlateFromTile : beginning loop over 1133 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1447.par makePlates : plateInfo struct for plate 1991 : (h4).mjd 53437 (h4).raCen 178.2361 (h4).decCen 31.97486 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.236 31.975 178.236 33.475 plMakePlateFromTile : mjd of obs : 53437.702760 Observed HA/dec of plate center, fiducial point (deg) : -13.002 31.945 -13.003 33.444 The rotation angle of the fid. point is 82.185336 plMakePlateFromTile : beginning loop over 1191 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1448.par makePlates : plateInfo struct for plate 1992 : (h4).mjd 53437 (h4).raCen 187.3084 (h4).decCen 38.4771 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 187.308 38.477 187.308 39.977 plMakePlateFromTile : mjd of obs : 53437.744510 Observed HA/dec of plate center, fiducial point (deg) : -7.002 38.444 -7.002 39.944 The rotation angle of the fid. point is 132.768161 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1449.par makePlates : plateInfo struct for plate 1993 : (h4).mjd 53437 (h4).raCen 203.0704 (h4).decCen 34.79503 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.070 34.795 203.070 36.295 plMakePlateFromTile : mjd of obs : 53437.785386 Observed HA/dec of plate center, fiducial point (deg) : -8.002 34.764 -8.002 36.264 The rotation angle of the fid. point is 104.346744 plMakePlateFromTile : beginning loop over 1322 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1450.par makePlates : plateInfo struct for plate 1994 : (h4).mjd 53437 (h4).raCen 193.533 (h4).decCen 31.71445 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.533 31.714 193.533 33.214 plMakePlateFromTile : mjd of obs : 53437.745121 Observed HA/dec of plate center, fiducial point (deg) : -13.002 31.684 -13.002 33.183 The rotation angle of the fid. point is 80.851895 plMakePlateFromTile : beginning loop over 1232 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1451.par makePlates : plateInfo struct for plate 1995 : (h4).mjd 53437 (h4).raCen 183.0904 (h4).decCen 40.65049 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.090 40.650 183.090 42.150 plMakePlateFromTile : mjd of obs : 53437.743916 Observed HA/dec of plate center, fiducial point (deg) : -3.002 40.617 -3.003 42.117 The rotation angle of the fid. point is 162.015004 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1452.par makePlates : plateInfo struct for plate 1996 : (h4).mjd 53437 (h4).raCen 171.6778 (h4).decCen 39.89534 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.678 39.895 171.678 41.395 plMakePlateFromTile : mjd of obs : 53437.662434 Observed HA/dec of plate center, fiducial point (deg) : -21.002 39.864 -21.003 41.364 The rotation angle of the fid. point is 106.205282 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1453.par makePlates : plateInfo struct for plate 1997 : (h4).mjd 53437 (h4).raCen 176.2222 (h4).decCen 38.17299 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.222 38.173 176.222 39.673 plMakePlateFromTile : mjd of obs : 53437.661161 Observed HA/dec of plate center, fiducial point (deg) : -26.002 38.142 -26.003 39.642 The rotation angle of the fid. point is 96.334073 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1454.par makePlates : plateInfo struct for plate 1998 : (h4).mjd 53437 (h4).raCen 160.3826 (h4).decCen 37.99076 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 160.383 37.991 160.383 39.491 plMakePlateFromTile : mjd of obs : 53437.620070 Observed HA/dec of plate center, fiducial point (deg) : -25.002 37.963 -25.003 39.462 The rotation angle of the fid. point is 96.734076 plMakePlateFromTile : beginning loop over 1303 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1455.par makePlates : plateInfo struct for plate 1999 : (h4).mjd 53437 (h4).raCen 184.5946 (h4).decCen 34.14998 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.595 34.150 184.595 35.650 plMakePlateFromTile : mjd of obs : 53437.745308 Observed HA/dec of plate center, fiducial point (deg) : -4.002 34.119 -4.002 35.618 The rotation angle of the fid. point is 110.736463 plMakePlateFromTile : beginning loop over 1331 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1456.par makePlates : plateInfo struct for plate 2000 : (h4).mjd 53437 (h4).raCen 190.1679 (h4).decCen 38.42872 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.168 38.429 190.168 39.929 plMakePlateFromTile : mjd of obs : 53437.744115 Observed HA/dec of plate center, fiducial point (deg) : -10.002 38.396 -10.002 39.895 The rotation angle of the fid. point is 121.623479 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1457.par makePlates : plateInfo struct for plate 2001 : (h4).mjd 53437 (h4).raCen 184.4832 (h4).decCen 38.52328 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.483 38.523 184.483 40.023 plMakePlateFromTile : mjd of obs : 53437.745001 Observed HA/dec of plate center, fiducial point (deg) : -4.002 38.491 -4.003 39.990 The rotation angle of the fid. point is 149.149401 plMakePlateFromTile : beginning loop over 1305 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1458.par makePlates : plateInfo struct for plate 2002 : (h4).mjd 53437 (h4).raCen 200.1559 (h4).decCen 29.03072 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.156 29.031 200.156 30.531 plMakePlateFromTile : mjd of obs : 53437.785631 Observed HA/dec of plate center, fiducial point (deg) : -5.002 29.001 -5.002 30.501 The rotation angle of the fid. point is 47.376720 plMakePlateFromTile : beginning loop over 1267 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1459.par makePlates : plateInfo struct for plate 2003 : (h4).mjd 53437 (h4).raCen 185.8787 (h4).decCen 36.33659 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 185.879 36.337 185.879 37.837 plMakePlateFromTile : mjd of obs : 53437.746093 Observed HA/dec of plate center, fiducial point (deg) : -5.002 36.304 -5.002 37.804 The rotation angle of the fid. point is 129.103887 plMakePlateFromTile : beginning loop over 1290 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1460.par makePlates : plateInfo struct for plate 2004 : (h4).mjd 53437 (h4).raCen 183.0342 (h4).decCen 32.16064 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.034 32.161 183.034 33.661 plMakePlateFromTile : mjd of obs : 53437.743758 Observed HA/dec of plate center, fiducial point (deg) : -3.002 32.130 -3.003 33.629 The rotation angle of the fid. point is 74.814030 plMakePlateFromTile : beginning loop over 1196 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1461.par makePlates : plateInfo struct for plate 2005 : (h4).mjd 53437 (h4).raCen 204.0323 (h4).decCen 38.91326 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 204.032 38.913 204.032 40.413 plMakePlateFromTile : mjd of obs : 53437.785276 Observed HA/dec of plate center, fiducial point (deg) : -9.002 38.881 -9.002 40.381 The rotation angle of the fid. point is 127.169483 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1462.par makePlates : plateInfo struct for plate 2006 : (h4).mjd 53437 (h4).raCen 195.1691 (h4).decCen 33.75885 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.169 33.759 195.169 35.259 plMakePlateFromTile : mjd of obs : 53437.785675 Observed HA/dec of plate center, fiducial point (deg) : -0.002 33.727 -0.002 35.227 The rotation angle of the fid. point is 179.875180 plMakePlateFromTile : beginning loop over 1306 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1463.par makePlates : plateInfo struct for plate 2007 : (h4).mjd 53437 (h4).raCen 163.2402 (h4).decCen 37.97844 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.240 37.978 163.240 39.478 plMakePlateFromTile : mjd of obs : 53437.661237 Observed HA/dec of plate center, fiducial point (deg) : -13.002 37.949 -13.003 39.449 The rotation angle of the fid. point is 112.123549 plMakePlateFromTile : beginning loop over 1301 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1464.par makePlates : plateInfo struct for plate 2008 : (h4).mjd 53437 (h4).raCen 175.608 (h4).decCen 31.6539 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.608 31.654 175.608 33.154 plMakePlateFromTile : mjd of obs : 53437.662230 Observed HA/dec of plate center, fiducial point (deg) : -25.002 31.625 -25.003 33.124 The rotation angle of the fid. point is 80.190891 plMakePlateFromTile : beginning loop over 1153 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1465.par makePlates : plateInfo struct for plate 2009 : (h4).mjd 53437 (h4).raCen 197.377 (h4).decCen 29.26057 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.377 29.261 197.377 30.761 plMakePlateFromTile : mjd of obs : 53437.786248 Observed HA/dec of plate center, fiducial point (deg) : -2.002 29.231 -2.002 30.730 The rotation angle of the fid. point is 25.293549 plMakePlateFromTile : beginning loop over 1236 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1466.par makePlates : plateInfo struct for plate 2010 : (h4).mjd 53437 (h4).raCen 188.5895 (h4).decCen 36.27961 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.589 36.280 188.589 37.780 plMakePlateFromTile : mjd of obs : 53437.745287 Observed HA/dec of plate center, fiducial point (deg) : -8.002 36.247 -8.002 37.747 The rotation angle of the fid. point is 115.426758 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1467.par makePlates : plateInfo struct for plate 2011 : (h4).mjd 53437 (h4).raCen 194.9614 (h4).decCen 29.18354 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 194.961 29.184 194.961 30.684 plMakePlateFromTile : mjd of obs : 53437.746307 Observed HA/dec of plate center, fiducial point (deg) : -14.002 29.154 -14.002 30.653 The rotation angle of the fid. point is 69.655284 plMakePlateFromTile : beginning loop over 1174 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1468.par makePlates : plateInfo struct for plate 2012 : (h4).mjd 53437 (h4).raCen 175.1225 (h4).decCen 35.92581 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.123 35.926 175.123 37.426 plMakePlateFromTile : mjd of obs : 53437.660887 Observed HA/dec of plate center, fiducial point (deg) : -25.002 35.895 -25.003 37.395 The rotation angle of the fid. point is 91.320345 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1469.par makePlates : plateInfo struct for plate 2013 : (h4).mjd 53437 (h4).raCen 185.8509 (h4).decCen 31.99752 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 185.851 31.998 185.851 33.498 plMakePlateFromTile : mjd of obs : 53437.746016 Observed HA/dec of plate center, fiducial point (deg) : -5.002 31.967 -5.002 33.466 The rotation angle of the fid. point is 77.775473 plMakePlateFromTile : beginning loop over 1188 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1470.par makePlates : plateInfo struct for plate 2014 : (h4).mjd 53437 (h4).raCen 207.7389 (h4).decCen 38.37143 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 207.739 38.371 207.739 39.871 plMakePlateFromTile : mjd of obs : 53437.787227 Observed HA/dec of plate center, fiducial point (deg) : -12.002 38.340 -12.002 39.839 The rotation angle of the fid. point is 116.043692 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1471.par makePlates : plateInfo struct for plate 2015 : (h4).mjd 53437 (h4).raCen 187.1206 (h4).decCen 34.14199 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 187.121 34.142 187.121 35.642 plMakePlateFromTile : mjd of obs : 53437.743990 Observed HA/dec of plate center, fiducial point (deg) : -7.002 34.110 -7.002 35.610 The rotation angle of the fid. point is 100.884016 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1472.par makePlates : plateInfo struct for plate 2016 : (h4).mjd 53437 (h4).raCen 196.757 (h4).decCen 35.73177 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.757 35.732 196.757 37.232 plMakePlateFromTile : mjd of obs : 53437.787300 Observed HA/dec of plate center, fiducial point (deg) : -1.002 35.700 -1.002 37.199 The rotation angle of the fid. point is 163.868963 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1473.par makePlates : plateInfo struct for plate 2017 : (h4).mjd 53437 (h4).raCen 205.6876 (h4).decCen 28.38269 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.688 28.383 205.688 29.883 plMakePlateFromTile : mjd of obs : 53437.787095 Observed HA/dec of plate center, fiducial point (deg) : -10.002 28.354 -10.002 29.854 The rotation angle of the fid. point is 60.307451 plMakePlateFromTile : beginning loop over 1317 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1474.par makePlates : plateInfo struct for plate 2018 : (h4).mjd 53437 (h4).raCen 195.5631 (h4).decCen 37.99938 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.563 37.999 195.563 39.499 plMakePlateFromTile : mjd of obs : 53437.786765 Observed HA/dec of plate center, fiducial point (deg) : -0.002 37.967 -0.002 39.466 The rotation angle of the fid. point is 179.974956 plMakePlateFromTile : beginning loop over 1300 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-266.01, 71.74, 2.9) and (-266.88, 70.99, 5.5) checkLTHo : distance = 1.147, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-266.88, 70.99, 5.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1475.par makePlates : plateInfo struct for plate 2019 : (h4).mjd 53437 (h4).raCen 160.3695 (h4).decCen 31.91774 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 160.369 31.918 160.369 33.418 plMakePlateFromTile : mjd of obs : 53437.620029 Observed HA/dec of plate center, fiducial point (deg) : -25.002 31.891 -25.003 33.391 The rotation angle of the fid. point is 80.880475 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1476.par makePlates : plateInfo struct for plate 2020 : (h4).mjd 53437 (h4).raCen 189.7639 (h4).decCen 34.0318 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.764 34.032 189.764 35.532 plMakePlateFromTile : mjd of obs : 53437.745768 Observed HA/dec of plate center, fiducial point (deg) : -9.002 34.000 -9.002 35.500 The rotation angle of the fid. point is 96.722602 plMakePlateFromTile : beginning loop over 1305 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1477.par makePlates : plateInfo struct for plate 2021 : (h4).mjd 53437 (h4).raCen 194.885 (h4).decCen 39.78762 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 194.885 39.788 194.885 41.288 plMakePlateFromTile : mjd of obs : 53437.746092 Observed HA/dec of plate center, fiducial point (deg) : -14.002 39.755 -14.002 41.254 The rotation angle of the fid. point is 117.396006 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1478.par makePlates : plateInfo struct for plate 2022 : (h4).mjd 53437 (h4).raCen 191.2507 (h4).decCen 36.20105 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.251 36.201 191.251 37.701 plMakePlateFromTile : mjd of obs : 53437.744343 Observed HA/dec of plate center, fiducial point (deg) : -11.002 36.169 -11.002 37.668 The rotation angle of the fid. point is 107.304212 plMakePlateFromTile : beginning loop over 1287 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1479.par makePlates : plateInfo struct for plate 2023 : (h4).mjd 53437 (h4).raCen 199.6804 (h4).decCen 35.33386 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.680 35.334 199.680 36.834 plMakePlateFromTile : mjd of obs : 53437.787083 Observed HA/dec of plate center, fiducial point (deg) : -4.002 35.302 -4.002 36.802 The rotation angle of the fid. point is 126.115532 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1480.par makePlates : plateInfo struct for plate 2024 : (h4).mjd 53437 (h4).raCen 207.1605 (h4).decCen 32.1572 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 207.161 32.157 207.160 33.657 plMakePlateFromTile : mjd of obs : 53437.785629 Observed HA/dec of plate center, fiducial point (deg) : -12.002 32.128 -12.002 33.627 The rotation angle of the fid. point is 83.088632 plMakePlateFromTile : beginning loop over 1328 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1481.par makePlates : plateInfo struct for plate 2025 : (h4).mjd 53437 (h4).raCen 161.3856 (h4).decCen 33.89868 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.386 33.899 161.386 35.399 plMakePlateFromTile : mjd of obs : 53437.661639 Observed HA/dec of plate center, fiducial point (deg) : -11.002 33.871 -11.003 35.371 The rotation angle of the fid. point is 93.734796 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1482.par makePlates : plateInfo struct for plate 2026 : (h4).mjd 53437 (h4).raCen 163.4115 (h4).decCen 32.27502 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.411 32.275 163.411 33.775 plMakePlateFromTile : mjd of obs : 53437.661706 Observed HA/dec of plate center, fiducial point (deg) : -13.002 32.247 -13.003 33.747 The rotation angle of the fid. point is 83.740284 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1483.par makePlates : plateInfo struct for plate 2027 : (h4).mjd 53437 (h4).raCen 178.9971 (h4).decCen 38.3438 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.997 38.344 178.997 39.844 plMakePlateFromTile : mjd of obs : 53437.704870 Observed HA/dec of plate center, fiducial point (deg) : -13.002 38.312 -13.003 39.811 The rotation angle of the fid. point is 113.705229 plMakePlateFromTile : beginning loop over 1318 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1484.par makePlates : plateInfo struct for plate 2028 : (h4).mjd 53437 (h4).raCen 206.5667 (h4).decCen 34.41897 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 206.567 34.419 206.567 35.919 plMakePlateFromTile : mjd of obs : 53437.786755 Observed HA/dec of plate center, fiducial point (deg) : -11.002 34.389 -11.002 35.888 The rotation angle of the fid. point is 96.863326 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1485.par makePlates : plateInfo struct for plate 2029 : (h4).mjd 53437 (h4).raCen 196.2655 (h4).decCen 31.55638 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.266 31.556 196.266 33.056 plMakePlateFromTile : mjd of obs : 53437.785940 Observed HA/dec of plate center, fiducial point (deg) : -1.002 31.526 -1.002 33.025 The rotation angle of the fid. point is 33.819056 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1486.par makePlates : plateInfo struct for plate 2030 : (h4).mjd 53437 (h4).raCen 168.0665 (h4).decCen 37.11638 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.067 37.116 168.067 38.616 plMakePlateFromTile : mjd of obs : 53437.660746 Observed HA/dec of plate center, fiducial point (deg) : -18.002 37.087 -18.003 38.586 The rotation angle of the fid. point is 100.961325 plMakePlateFromTile : beginning loop over 1345 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1487.par makePlates : plateInfo struct for plate 2031 : (h4).mjd 53437 (h4).raCen 194.0769 (h4).decCen 35.95548 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 194.077 35.955 194.077 37.455 plMakePlateFromTile : mjd of obs : 53437.743855 Observed HA/dec of plate center, fiducial point (deg) : -14.002 35.924 -14.002 37.423 The rotation angle of the fid. point is 101.169364 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1488.par makePlates : plateInfo struct for plate 2032 : (h4).mjd 53437 (h4).raCen 198.5777 (h4).decCen 37.6016 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.578 37.602 198.578 39.102 plMakePlateFromTile : mjd of obs : 53437.786799 Observed HA/dec of plate center, fiducial point (deg) : -3.002 37.569 -3.002 39.069 The rotation angle of the fid. point is 151.985761 plMakePlateFromTile : beginning loop over 1318 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1489.par makePlates : plateInfo struct for plate 2033 : (h4).mjd 53437 (h4).raCen 208.1581 (h4).decCen 36.16601 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 208.158 36.166 208.158 37.666 plMakePlateFromTile : mjd of obs : 53437.865979 Observed HA/dec of plate center, fiducial point (deg) : 15.998 36.135 15.998 37.635 The rotation angle of the fid. point is -99.642014 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1490.par makePlates : plateInfo struct for plate 2034 : (h4).mjd 53437 (h4).raCen 167.0483 (h4).decCen 34.97906 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.048 34.979 167.048 36.479 plMakePlateFromTile : mjd of obs : 53437.660696 Observed HA/dec of plate center, fiducial point (deg) : -17.002 34.950 -17.003 36.450 The rotation angle of the fid. point is 93.924437 plMakePlateFromTile : beginning loop over 1312 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1491.par makePlates : plateInfo struct for plate 2035 : (h4).mjd 53437 (h4).raCen 177.8131 (h4).decCen 36.12406 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.813 36.124 177.813 37.624 plMakePlateFromTile : mjd of obs : 53437.704361 Observed HA/dec of plate center, fiducial point (deg) : -12.002 36.093 -12.003 37.592 The rotation angle of the fid. point is 105.041086 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (223.43, -145.83, 6.8) and (223.43, -145.90, 8.4) checkLTHo : distance = 0.065, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(223.43, -145.90, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1492.par makePlates : plateInfo struct for plate 2036 : (h4).mjd 53437 (h4).raCen 173.421 (h4).decCen 37.92417 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.421 37.924 173.421 39.424 plMakePlateFromTile : mjd of obs : 53437.661718 Observed HA/dec of plate center, fiducial point (deg) : -23.002 37.893 -23.003 39.393 The rotation angle of the fid. point is 98.330884 plMakePlateFromTile : beginning loop over 1339 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1493.par makePlates : plateInfo struct for plate 2037 : (h4).mjd 53437 (h4).raCen 170.5089 (h4).decCen 37.59666 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.509 37.597 170.509 39.097 plMakePlateFromTile : mjd of obs : 53437.661967 Observed HA/dec of plate center, fiducial point (deg) : -20.002 37.566 -20.003 39.066 The rotation angle of the fid. point is 100.358881 plMakePlateFromTile : beginning loop over 1290 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Sep 14 20:00:26 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 69 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1969.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 100 2 11 63 3 4 29 4 0 8 5 10 46 6 13 68 7 9 94 8 9 115 9 7 97 10 10 98 11 13 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 4 at -227.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 125 13 plFiberPlate : adding spectro-photo std with objId = 4632 40 6 125 59 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 126 105 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 126 42 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 31 80 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 132 54 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 307 2 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 312 28 plFiberPlate : 42 possible sky positions to use as objects from a possible 388. plFiberPlate : 26 possible sky positions to use as objects from a possible 387. plFiberPlate : 14 possible sky positions to use as objects from a possible 386. plFiberPlate : 11 possible sky positions to use as objects from a possible 385. plFiberPlate : 15 possible sky positions to use as objects from a possible 384. plFiberPlate : 24 possible sky positions to use as objects from a possible 383. plFiberPlate : 38 possible sky positions to use as objects from a possible 382. plFiberPlate : 28 possible sky positions to use as objects from a possible 381. plFiberPlate : 21 possible sky positions to use as objects from a possible 380. plFiberPlate : 17 possible sky positions to use as objects from a possible 379. plFiberPlate : 9 possible sky positions to use as objects from a possible 378. plFiberPlate : 6 possible sky positions to use as objects from a possible 377. plFiberPlate : 13 possible sky positions to use as objects from a possible 376. plFiberPlate : 15 possible sky positions to use as objects from a possible 375. plFiberPlate : 15 possible sky positions to use as objects from a possible 374. plFiberPlate : 18 possible sky positions to use as objects from a possible 373. plFiberPlate : 21 possible sky positions to use as objects from a possible 372. plFiberPlate : 23 possible sky positions to use as objects from a possible 371. plFiberPlate : 12 possible sky positions to use as objects from a possible 370. plFiberPlate : 8 possible sky positions to use as objects from a possible 369. plFiberPlate : 10 possible sky positions to use as objects from a possible 368. plFiberPlate : 20 possible sky positions to use as objects from a possible 367. plFiberPlate : 24 possible sky positions to use as objects from a possible 366. plFiberPlate : 15 possible sky positions to use as objects from a possible 365. plFiberPlate : 14 possible sky positions to use as objects from a possible 364. plFiberPlate : 19 possible sky positions to use as objects from a possible 363. plFiberPlate : 11 possible sky positions to use as objects from a possible 362. plFiberPlate : 13 possible sky positions to use as objects from a possible 361. plFiberPlate : 11 possible sky positions to use as objects from a possible 360. plFiberPlate : 3 possible sky positions to use as objects from a possible 359. plFiberPlate : 14 possible sky positions to use as objects from a possible 358. plFiberPlate : 9 possible sky positions to use as objects from a possible 357. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1969.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1969.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1970.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 130 2 8 113 3 6 89 4 8 104 5 9 125 6 4 112 7 6 100 8 5 107 9 6 112 10 9 158 11 8 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 406 155 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 343 62 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 335 11 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 332 88 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 408 90 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 401 52 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 405 71 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 409 39 plFiberPlate : 105 possible sky positions to use as objects from a possible 625. plFiberPlate : 89 possible sky positions to use as objects from a possible 624. plFiberPlate : 42 possible sky positions to use as objects from a possible 623. plFiberPlate : 19 possible sky positions to use as objects from a possible 622. plFiberPlate : 33 possible sky positions to use as objects from a possible 621. plFiberPlate : 55 possible sky positions to use as objects from a possible 620. plFiberPlate : 57 possible sky positions to use as objects from a possible 619. plFiberPlate : 65 possible sky positions to use as objects from a possible 618. plFiberPlate : 45 possible sky positions to use as objects from a possible 617. plFiberPlate : 37 possible sky positions to use as objects from a possible 616. plFiberPlate : 26 possible sky positions to use as objects from a possible 615. plFiberPlate : 14 possible sky positions to use as objects from a possible 614. plFiberPlate : 10 possible sky positions to use as objects from a possible 613. plFiberPlate : 17 possible sky positions to use as objects from a possible 612. plFiberPlate : 15 possible sky positions to use as objects from a possible 611. plFiberPlate : 31 possible sky positions to use as objects from a possible 610. plFiberPlate : 54 possible sky positions to use as objects from a possible 609. plFiberPlate : 46 possible sky positions to use as objects from a possible 608. plFiberPlate : 28 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 5 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 13 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 24 possible sky positions to use as objects from a possible 601. plFiberPlate : 79 possible sky positions to use as objects from a possible 600. plFiberPlate : 54 possible sky positions to use as objects from a possible 599. plFiberPlate : 30 possible sky positions to use as objects from a possible 598. plFiberPlate : 27 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 26 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1969.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1970.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1970.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1971.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 112 2 3 60 3 4 52 4 4 104 5 7 130 6 10 108 7 3 103 8 4 114 9 11 121 10 6 132 11 6 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 179 10 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 180 51 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 186 46 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 196 46 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 124 62 plFiberPlate : adding spectro-photo std with objId = 4599 40 1 116 75 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 121 28 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 127 35 plFiberPlate : 115 possible sky positions to use as objects from a possible 576. plFiberPlate : 74 possible sky positions to use as objects from a possible 575. plFiberPlate : 50 possible sky positions to use as objects from a possible 574. plFiberPlate : 38 possible sky positions to use as objects from a possible 573. plFiberPlate : 26 possible sky positions to use as objects from a possible 572. plFiberPlate : 21 possible sky positions to use as objects from a possible 571. plFiberPlate : 55 possible sky positions to use as objects from a possible 570. plFiberPlate : 73 possible sky positions to use as objects from a possible 569. plFiberPlate : 53 possible sky positions to use as objects from a possible 568. plFiberPlate : 30 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 12 possible sky positions to use as objects from a possible 565. plFiberPlate : 19 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : 19 possible sky positions to use as objects from a possible 562. plFiberPlate : 6 possible sky positions to use as objects from a possible 561. plFiberPlate : 66 possible sky positions to use as objects from a possible 560. plFiberPlate : 53 possible sky positions to use as objects from a possible 559. plFiberPlate : 33 possible sky positions to use as objects from a possible 558. plFiberPlate : 16 possible sky positions to use as objects from a possible 557. plFiberPlate : 14 possible sky positions to use as objects from a possible 556. plFiberPlate : 6 possible sky positions to use as objects from a possible 555. plFiberPlate : 9 possible sky positions to use as objects from a possible 554. plFiberPlate : 22 possible sky positions to use as objects from a possible 553. plFiberPlate : 21 possible sky positions to use as objects from a possible 552. plFiberPlate : 49 possible sky positions to use as objects from a possible 551. plFiberPlate : 45 possible sky positions to use as objects from a possible 550. plFiberPlate : 30 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 17 possible sky positions to use as objects from a possible 547. plFiberPlate : 16 possible sky positions to use as objects from a possible 546. plFiberPlate : 22 possible sky positions to use as objects from a possible 545. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1970.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1971.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1971.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1972.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 123 2 10 94 3 8 92 4 8 99 5 9 116 6 12 105 7 7 112 8 8 125 9 13 112 10 14 158 11 11 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 325 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 390 2 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 398 90 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 316 82 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 328 18 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 401 52 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 395 41 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 405 71 plFiberPlate : 100 possible sky positions to use as objects from a possible 622. plFiberPlate : 91 possible sky positions to use as objects from a possible 621. plFiberPlate : 60 possible sky positions to use as objects from a possible 620. plFiberPlate : 48 possible sky positions to use as objects from a possible 619. plFiberPlate : 21 possible sky positions to use as objects from a possible 618. plFiberPlate : 41 possible sky positions to use as objects from a possible 617. plFiberPlate : 44 possible sky positions to use as objects from a possible 616. plFiberPlate : 84 possible sky positions to use as objects from a possible 615. plFiberPlate : 63 possible sky positions to use as objects from a possible 614. plFiberPlate : 33 possible sky positions to use as objects from a possible 613. plFiberPlate : 24 possible sky positions to use as objects from a possible 612. plFiberPlate : 11 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 16 possible sky positions to use as objects from a possible 609. plFiberPlate : 14 possible sky positions to use as objects from a possible 608. plFiberPlate : 34 possible sky positions to use as objects from a possible 607. plFiberPlate : 46 possible sky positions to use as objects from a possible 606. plFiberPlate : 41 possible sky positions to use as objects from a possible 605. plFiberPlate : 25 possible sky positions to use as objects from a possible 604. plFiberPlate : 26 possible sky positions to use as objects from a possible 603. plFiberPlate : 14 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 12 possible sky positions to use as objects from a possible 600. plFiberPlate : 23 possible sky positions to use as objects from a possible 599. plFiberPlate : 11 possible sky positions to use as objects from a possible 598. plFiberPlate : 77 possible sky positions to use as objects from a possible 597. plFiberPlate : 47 possible sky positions to use as objects from a possible 596. plFiberPlate : 34 possible sky positions to use as objects from a possible 595. plFiberPlate : 18 possible sky positions to use as objects from a possible 594. plFiberPlate : 35 possible sky positions to use as objects from a possible 593. plFiberPlate : 38 possible sky positions to use as objects from a possible 592. plFiberPlate : 30 possible sky positions to use as objects from a possible 591. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1971.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1972.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1972.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1973.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 135 2 5 97 3 14 98 4 13 124 5 12 110 6 7 79 7 9 97 8 6 96 9 7 88 10 16 151 11 6 120 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 310 35 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 241 51 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 239 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 305 127 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 230 83 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 225 23 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 229 70 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 299 46 plFiberPlate : 140 possible sky positions to use as objects from a possible 602. plFiberPlate : 39 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 25 possible sky positions to use as objects from a possible 599. plFiberPlate : 34 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 42 possible sky positions to use as objects from a possible 596. plFiberPlate : 65 possible sky positions to use as objects from a possible 595. plFiberPlate : 28 possible sky positions to use as objects from a possible 594. plFiberPlate : 22 possible sky positions to use as objects from a possible 593. plFiberPlate : 11 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 13 possible sky positions to use as objects from a possible 590. plFiberPlate : 37 possible sky positions to use as objects from a possible 589. plFiberPlate : 21 possible sky positions to use as objects from a possible 588. plFiberPlate : 21 possible sky positions to use as objects from a possible 587. plFiberPlate : 53 possible sky positions to use as objects from a possible 586. plFiberPlate : 20 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 8 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 4 possible sky positions to use as objects from a possible 579. plFiberPlate : 7 possible sky positions to use as objects from a possible 578. plFiberPlate : 43 possible sky positions to use as objects from a possible 577. plFiberPlate : 34 possible sky positions to use as objects from a possible 576. plFiberPlate : 29 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 8 possible sky positions to use as objects from a possible 572. plFiberPlate : 31 possible sky positions to use as objects from a possible 571. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1972.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1973.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1973.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1974.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 67 2 3 26 3 3 43 4 6 95 5 14 116 6 10 91 7 12 84 8 14 101 9 11 108 10 7 105 11 8 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 106 29 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 107 17 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 109 45 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 204 64 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 106 14 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 97 14 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 108 79 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 196 47 plFiberPlate : 107 possible sky positions to use as objects from a possible 478. plFiberPlate : 65 possible sky positions to use as objects from a possible 477. plFiberPlate : 36 possible sky positions to use as objects from a possible 476. plFiberPlate : 22 possible sky positions to use as objects from a possible 475. plFiberPlate : 12 possible sky positions to use as objects from a possible 474. plFiberPlate : 8 possible sky positions to use as objects from a possible 473. plFiberPlate : 28 possible sky positions to use as objects from a possible 472. plFiberPlate : 55 possible sky positions to use as objects from a possible 471. plFiberPlate : 38 possible sky positions to use as objects from a possible 470. plFiberPlate : 22 possible sky positions to use as objects from a possible 469. plFiberPlate : 15 possible sky positions to use as objects from a possible 468. plFiberPlate : 12 possible sky positions to use as objects from a possible 467. plFiberPlate : 6 possible sky positions to use as objects from a possible 466. plFiberPlate : 12 possible sky positions to use as objects from a possible 465. plFiberPlate : 7 possible sky positions to use as objects from a possible 464. plFiberPlate : 6 possible sky positions to use as objects from a possible 463. plFiberPlate : 54 possible sky positions to use as objects from a possible 462. plFiberPlate : 33 possible sky positions to use as objects from a possible 461. plFiberPlate : 24 possible sky positions to use as objects from a possible 460. plFiberPlate : 17 possible sky positions to use as objects from a possible 459. plFiberPlate : 8 possible sky positions to use as objects from a possible 458. plFiberPlate : 14 possible sky positions to use as objects from a possible 457. plFiberPlate : 13 possible sky positions to use as objects from a possible 456. plFiberPlate : 15 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 56 possible sky positions to use as objects from a possible 453. plFiberPlate : 36 possible sky positions to use as objects from a possible 452. plFiberPlate : 17 possible sky positions to use as objects from a possible 451. plFiberPlate : 12 possible sky positions to use as objects from a possible 450. plFiberPlate : 22 possible sky positions to use as objects from a possible 449. plFiberPlate : 11 possible sky positions to use as objects from a possible 448. plFiberPlate : 9 possible sky positions to use as objects from a possible 447. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1973.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1974.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1974.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1975.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 94 2 3 25 3 2 21 4 5 82 5 7 118 6 9 96 7 8 97 8 7 105 9 9 101 10 10 99 11 6 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 4 132 17 plFiberPlate : adding spectro-photo std with objId = 4599 40 1 136 22 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 205 2 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 142 24 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 203 17 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 127 35 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 131 47 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 140 57 plFiberPlate : 86 possible sky positions to use as objects from a possible 479. plFiberPlate : 63 possible sky positions to use as objects from a possible 478. plFiberPlate : 28 possible sky positions to use as objects from a possible 477. plFiberPlate : 16 possible sky positions to use as objects from a possible 476. plFiberPlate : 31 possible sky positions to use as objects from a possible 475. plFiberPlate : 35 possible sky positions to use as objects from a possible 474. plFiberPlate : 16 possible sky positions to use as objects from a possible 473. plFiberPlate : 54 possible sky positions to use as objects from a possible 472. plFiberPlate : 37 possible sky positions to use as objects from a possible 471. plFiberPlate : 11 possible sky positions to use as objects from a possible 470. plFiberPlate : 5 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 11 possible sky positions to use as objects from a possible 467. plFiberPlate : 7 possible sky positions to use as objects from a possible 466. plFiberPlate : 10 possible sky positions to use as objects from a possible 465. plFiberPlate : 9 possible sky positions to use as objects from a possible 464. plFiberPlate : 70 possible sky positions to use as objects from a possible 463. plFiberPlate : 39 possible sky positions to use as objects from a possible 462. plFiberPlate : 20 possible sky positions to use as objects from a possible 461. plFiberPlate : 9 possible sky positions to use as objects from a possible 460. plFiberPlate : 5 possible sky positions to use as objects from a possible 459. plFiberPlate : 9 possible sky positions to use as objects from a possible 458. plFiberPlate : 15 possible sky positions to use as objects from a possible 457. plFiberPlate : 5 possible sky positions to use as objects from a possible 456. plFiberPlate : 14 possible sky positions to use as objects from a possible 455. plFiberPlate : 40 possible sky positions to use as objects from a possible 454. plFiberPlate : 27 possible sky positions to use as objects from a possible 453. plFiberPlate : 21 possible sky positions to use as objects from a possible 452. plFiberPlate : 13 possible sky positions to use as objects from a possible 451. plFiberPlate : 13 possible sky positions to use as objects from a possible 450. plFiberPlate : 10 possible sky positions to use as objects from a possible 449. plFiberPlate : 15 possible sky positions to use as objects from a possible 448. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1974.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1975.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1975.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1976.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 108 2 7 97 3 10 95 4 11 109 5 8 117 6 4 102 7 4 114 8 4 114 9 6 111 10 11 152 11 7 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 357 106 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 433 59 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 421 32 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 419 46 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 418 59 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 357 6 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 419 67 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 346 47 plFiberPlate : 102 possible sky positions to use as objects from a possible 604. plFiberPlate : 73 possible sky positions to use as objects from a possible 603. plFiberPlate : 51 possible sky positions to use as objects from a possible 602. plFiberPlate : 43 possible sky positions to use as objects from a possible 601. plFiberPlate : 30 possible sky positions to use as objects from a possible 600. plFiberPlate : 35 possible sky positions to use as objects from a possible 599. plFiberPlate : 30 possible sky positions to use as objects from a possible 598. plFiberPlate : 87 possible sky positions to use as objects from a possible 597. plFiberPlate : 45 possible sky positions to use as objects from a possible 596. plFiberPlate : 25 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 20 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : 20 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : 65 possible sky positions to use as objects from a possible 588. plFiberPlate : 35 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 9 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : 4 possible sky positions to use as objects from a possible 580. plFiberPlate : 71 possible sky positions to use as objects from a possible 579. plFiberPlate : 59 possible sky positions to use as objects from a possible 578. plFiberPlate : 31 possible sky positions to use as objects from a possible 577. plFiberPlate : 36 possible sky positions to use as objects from a possible 576. plFiberPlate : 21 possible sky positions to use as objects from a possible 575. plFiberPlate : 37 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1975.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1976.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1976.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1977.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 118 2 3 91 3 4 85 4 6 90 5 9 121 6 10 108 7 11 102 8 8 118 9 7 104 10 4 144 11 3 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 462 44 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 73 96 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 79 84 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 69 49 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 458 37 plFiberPlate : adding spectro-photo std with objId = 4382 40 5 78 40 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 449 12 plFiberPlate : adding spectro-photo std with objId = 4382 40 5 65 4 plFiberPlate : 103 possible sky positions to use as objects from a possible 601. plFiberPlate : 95 possible sky positions to use as objects from a possible 600. plFiberPlate : 50 possible sky positions to use as objects from a possible 599. plFiberPlate : 35 possible sky positions to use as objects from a possible 598. plFiberPlate : 36 possible sky positions to use as objects from a possible 597. plFiberPlate : 33 possible sky positions to use as objects from a possible 596. plFiberPlate : 47 possible sky positions to use as objects from a possible 595. plFiberPlate : 87 possible sky positions to use as objects from a possible 594. plFiberPlate : 59 possible sky positions to use as objects from a possible 593. plFiberPlate : 34 possible sky positions to use as objects from a possible 592. plFiberPlate : 26 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 15 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 66 possible sky positions to use as objects from a possible 585. plFiberPlate : 43 possible sky positions to use as objects from a possible 584. plFiberPlate : 37 possible sky positions to use as objects from a possible 583. plFiberPlate : 31 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 17 possible sky positions to use as objects from a possible 580. plFiberPlate : 8 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 20 possible sky positions to use as objects from a possible 577. plFiberPlate : 61 possible sky positions to use as objects from a possible 576. plFiberPlate : 46 possible sky positions to use as objects from a possible 575. plFiberPlate : 46 possible sky positions to use as objects from a possible 574. plFiberPlate : 24 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 3 possible sky positions to use as objects from a possible 571. plFiberPlate : 63 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1976.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1977.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1977.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1978.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 100 2 4 54 3 1 33 4 8 82 5 8 122 6 7 95 7 5 81 8 6 87 9 9 109 10 9 120 11 8 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 139 66 plFiberPlate : adding spectro-photo std with objId = 4646 40 5 67 57 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 72 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 130 2 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 136 75 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 130 6 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 133 11 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 124 78 plFiberPlate : 94 possible sky positions to use as objects from a possible 500. plFiberPlate : 34 possible sky positions to use as objects from a possible 499. plFiberPlate : 30 possible sky positions to use as objects from a possible 498. plFiberPlate : 40 possible sky positions to use as objects from a possible 497. plFiberPlate : 26 possible sky positions to use as objects from a possible 496. plFiberPlate : 17 possible sky positions to use as objects from a possible 495. plFiberPlate : 14 possible sky positions to use as objects from a possible 494. plFiberPlate : 66 possible sky positions to use as objects from a possible 493. plFiberPlate : 36 possible sky positions to use as objects from a possible 492. plFiberPlate : 32 possible sky positions to use as objects from a possible 491. plFiberPlate : 20 possible sky positions to use as objects from a possible 490. plFiberPlate : 14 possible sky positions to use as objects from a possible 489. plFiberPlate : 19 possible sky positions to use as objects from a possible 488. plFiberPlate : 9 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 8 possible sky positions to use as objects from a possible 485. plFiberPlate : 57 possible sky positions to use as objects from a possible 484. plFiberPlate : 63 possible sky positions to use as objects from a possible 483. plFiberPlate : 41 possible sky positions to use as objects from a possible 482. plFiberPlate : 24 possible sky positions to use as objects from a possible 481. plFiberPlate : 17 possible sky positions to use as objects from a possible 480. plFiberPlate : 10 possible sky positions to use as objects from a possible 479. plFiberPlate : 3 possible sky positions to use as objects from a possible 478. plFiberPlate : 7 possible sky positions to use as objects from a possible 477. plFiberPlate : 10 possible sky positions to use as objects from a possible 476. plFiberPlate : 32 possible sky positions to use as objects from a possible 475. plFiberPlate : 15 possible sky positions to use as objects from a possible 474. plFiberPlate : 12 possible sky positions to use as objects from a possible 473. plFiberPlate : 11 possible sky positions to use as objects from a possible 472. plFiberPlate : 14 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 4 possible sky positions to use as objects from a possible 469. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1977.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1978.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1978.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1979.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 73 2 2 12 3 3 25 4 7 81 5 7 101 6 10 97 7 10 95 8 14 106 9 10 104 10 11 86 11 8 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 95 35 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 94 52 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 87 23 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 86 21 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 97 14 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 186 81 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 178 8 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 82 35 plFiberPlate : 89 possible sky positions to use as objects from a possible 468. plFiberPlate : 66 possible sky positions to use as objects from a possible 467. plFiberPlate : 38 possible sky positions to use as objects from a possible 466. plFiberPlate : 21 possible sky positions to use as objects from a possible 465. plFiberPlate : 21 possible sky positions to use as objects from a possible 464. plFiberPlate : 20 possible sky positions to use as objects from a possible 463. plFiberPlate : 35 possible sky positions to use as objects from a possible 462. plFiberPlate : 50 possible sky positions to use as objects from a possible 461. plFiberPlate : 43 possible sky positions to use as objects from a possible 460. plFiberPlate : 20 possible sky positions to use as objects from a possible 459. plFiberPlate : 13 possible sky positions to use as objects from a possible 458. plFiberPlate : 6 possible sky positions to use as objects from a possible 457. plFiberPlate : 19 possible sky positions to use as objects from a possible 456. plFiberPlate : 14 possible sky positions to use as objects from a possible 455. plFiberPlate : 13 possible sky positions to use as objects from a possible 454. plFiberPlate : 27 possible sky positions to use as objects from a possible 453. plFiberPlate : 47 possible sky positions to use as objects from a possible 452. plFiberPlate : 33 possible sky positions to use as objects from a possible 451. plFiberPlate : 17 possible sky positions to use as objects from a possible 450. plFiberPlate : 15 possible sky positions to use as objects from a possible 449. plFiberPlate : 6 possible sky positions to use as objects from a possible 448. plFiberPlate : 12 possible sky positions to use as objects from a possible 447. plFiberPlate : 12 possible sky positions to use as objects from a possible 446. plFiberPlate : 14 possible sky positions to use as objects from a possible 445. plFiberPlate : 21 possible sky positions to use as objects from a possible 444. plFiberPlate : 43 possible sky positions to use as objects from a possible 443. plFiberPlate : 32 possible sky positions to use as objects from a possible 442. plFiberPlate : 16 possible sky positions to use as objects from a possible 441. plFiberPlate : 12 possible sky positions to use as objects from a possible 440. plFiberPlate : 18 possible sky positions to use as objects from a possible 439. plFiberPlate : 8 possible sky positions to use as objects from a possible 438. plFiberPlate : 13 possible sky positions to use as objects from a possible 437. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1978.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1979.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1979.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1980.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 110 2 9 94 3 6 90 4 7 100 5 11 128 6 9 110 7 8 110 8 13 115 9 17 118 10 10 133 11 11 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 368 75 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 366 54 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 301 30 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 360 8 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 357 34 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 298 2 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 373 39 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 370 10 plFiberPlate : 115 possible sky positions to use as objects from a possible 614. plFiberPlate : 65 possible sky positions to use as objects from a possible 613. plFiberPlate : 46 possible sky positions to use as objects from a possible 612. plFiberPlate : 25 possible sky positions to use as objects from a possible 611. plFiberPlate : 29 possible sky positions to use as objects from a possible 610. plFiberPlate : 35 possible sky positions to use as objects from a possible 609. plFiberPlate : 46 possible sky positions to use as objects from a possible 608. plFiberPlate : 66 possible sky positions to use as objects from a possible 607. plFiberPlate : 31 possible sky positions to use as objects from a possible 606. plFiberPlate : 30 possible sky positions to use as objects from a possible 605. plFiberPlate : 18 possible sky positions to use as objects from a possible 604. plFiberPlate : 18 possible sky positions to use as objects from a possible 603. plFiberPlate : 20 possible sky positions to use as objects from a possible 602. plFiberPlate : 20 possible sky positions to use as objects from a possible 601. plFiberPlate : 18 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 51 possible sky positions to use as objects from a possible 598. plFiberPlate : 18 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 16 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 21 possible sky positions to use as objects from a possible 590. plFiberPlate : 75 possible sky positions to use as objects from a possible 589. plFiberPlate : 63 possible sky positions to use as objects from a possible 588. plFiberPlate : 31 possible sky positions to use as objects from a possible 587. plFiberPlate : 35 possible sky positions to use as objects from a possible 586. plFiberPlate : 42 possible sky positions to use as objects from a possible 585. plFiberPlate : 33 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1979.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1980.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1980.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1981.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 92 2 3 41 3 2 64 4 6 113 5 8 121 6 6 85 7 9 93 8 13 112 9 6 110 10 12 120 11 8 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 40 62 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 319 83 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 46 63 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 137 49 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 42 15 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 40 8 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 138 104 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 48 47 plFiberPlate : 122 possible sky positions to use as objects from a possible 530. plFiberPlate : 65 possible sky positions to use as objects from a possible 529. plFiberPlate : 43 possible sky positions to use as objects from a possible 528. plFiberPlate : 12 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 35 possible sky positions to use as objects from a possible 525. plFiberPlate : 21 possible sky positions to use as objects from a possible 524. plFiberPlate : 52 possible sky positions to use as objects from a possible 523. plFiberPlate : 25 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 5 possible sky positions to use as objects from a possible 520. plFiberPlate : 4 possible sky positions to use as objects from a possible 519. plFiberPlate : 2 possible sky positions to use as objects from a possible 518. plFiberPlate : 19 possible sky positions to use as objects from a possible 517. plFiberPlate : 9 possible sky positions to use as objects from a possible 516. plFiberPlate : 17 possible sky positions to use as objects from a possible 515. plFiberPlate : 60 possible sky positions to use as objects from a possible 514. plFiberPlate : 31 possible sky positions to use as objects from a possible 513. plFiberPlate : 27 possible sky positions to use as objects from a possible 512. plFiberPlate : 22 possible sky positions to use as objects from a possible 511. plFiberPlate : 7 possible sky positions to use as objects from a possible 510. plFiberPlate : 7 possible sky positions to use as objects from a possible 509. plFiberPlate : 17 possible sky positions to use as objects from a possible 508. plFiberPlate : 8 possible sky positions to use as objects from a possible 507. plFiberPlate : 23 possible sky positions to use as objects from a possible 506. plFiberPlate : 53 possible sky positions to use as objects from a possible 505. plFiberPlate : 37 possible sky positions to use as objects from a possible 504. plFiberPlate : 14 possible sky positions to use as objects from a possible 503. plFiberPlate : 11 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 18 possible sky positions to use as objects from a possible 500. plFiberPlate : 20 possible sky positions to use as objects from a possible 499. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1980.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1981.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1981.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1982.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 118 2 14 102 3 9 95 4 9 119 5 16 120 6 8 93 7 6 65 8 9 78 9 11 88 10 20 150 11 12 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 307 35 plFiberPlate : adding spectro-photo std with objId = 4569 40 6 314 21 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 85 103 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 303 15 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 85 59 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 310 27 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 313 52 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 304 41 plFiberPlate : 115 possible sky positions to use as objects from a possible 572. plFiberPlate : 63 possible sky positions to use as objects from a possible 571. plFiberPlate : 23 possible sky positions to use as objects from a possible 570. plFiberPlate : 32 possible sky positions to use as objects from a possible 569. plFiberPlate : 33 possible sky positions to use as objects from a possible 568. plFiberPlate : 32 possible sky positions to use as objects from a possible 567. plFiberPlate : 37 possible sky positions to use as objects from a possible 566. plFiberPlate : 89 possible sky positions to use as objects from a possible 565. plFiberPlate : 33 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 12 possible sky positions to use as objects from a possible 562. plFiberPlate : 4 possible sky positions to use as objects from a possible 561. plFiberPlate : 15 possible sky positions to use as objects from a possible 560. plFiberPlate : 10 possible sky positions to use as objects from a possible 559. plFiberPlate : 16 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 51 possible sky positions to use as objects from a possible 556. plFiberPlate : 27 possible sky positions to use as objects from a possible 555. plFiberPlate : 12 possible sky positions to use as objects from a possible 554. plFiberPlate : 8 possible sky positions to use as objects from a possible 553. plFiberPlate : 6 possible sky positions to use as objects from a possible 552. plFiberPlate : 8 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 7 possible sky positions to use as objects from a possible 549. plFiberPlate : 2 possible sky positions to use as objects from a possible 548. plFiberPlate : 52 possible sky positions to use as objects from a possible 547. plFiberPlate : 21 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 6 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 5 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1981.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1982.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1982.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1983.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 118 2 7 90 3 4 95 4 3 102 5 9 124 6 9 97 7 9 86 8 8 108 9 7 109 10 7 153 11 5 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 58 48 plFiberPlate : adding spectro-photo std with objId = 4550 40 4 50 11 plFiberPlate : adding spectro-photo std with objId = 4550 40 6 51 40 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 118 15 plFiberPlate : adding spectro-photo std with objId = 4504 40 1 53 49 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 60 75 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 124 21 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 331 54 plFiberPlate : 118 possible sky positions to use as objects from a possible 606. plFiberPlate : 106 possible sky positions to use as objects from a possible 605. plFiberPlate : 48 possible sky positions to use as objects from a possible 604. plFiberPlate : 41 possible sky positions to use as objects from a possible 603. plFiberPlate : 26 possible sky positions to use as objects from a possible 602. plFiberPlate : 34 possible sky positions to use as objects from a possible 601. plFiberPlate : 42 possible sky positions to use as objects from a possible 600. plFiberPlate : 74 possible sky positions to use as objects from a possible 599. plFiberPlate : 50 possible sky positions to use as objects from a possible 598. plFiberPlate : 45 possible sky positions to use as objects from a possible 597. plFiberPlate : 29 possible sky positions to use as objects from a possible 596. plFiberPlate : 15 possible sky positions to use as objects from a possible 595. plFiberPlate : 14 possible sky positions to use as objects from a possible 594. plFiberPlate : 18 possible sky positions to use as objects from a possible 593. plFiberPlate : 20 possible sky positions to use as objects from a possible 592. plFiberPlate : 27 possible sky positions to use as objects from a possible 591. plFiberPlate : 69 possible sky positions to use as objects from a possible 590. plFiberPlate : 57 possible sky positions to use as objects from a possible 589. plFiberPlate : 34 possible sky positions to use as objects from a possible 588. plFiberPlate : 24 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 10 possible sky positions to use as objects from a possible 584. plFiberPlate : 28 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 47 possible sky positions to use as objects from a possible 581. plFiberPlate : 32 possible sky positions to use as objects from a possible 580. plFiberPlate : 21 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 22 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 18 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1982.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1983.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1983.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1984.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 119 2 7 96 3 10 89 4 12 103 5 6 133 6 6 106 7 4 102 8 6 117 9 7 115 10 11 143 11 8 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 461 79 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 465 19 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 385 2 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 391 55 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 389 89 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 473 62 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 463 53 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 473 33 plFiberPlate : 109 possible sky positions to use as objects from a possible 628. plFiberPlate : 64 possible sky positions to use as objects from a possible 627. plFiberPlate : 49 possible sky positions to use as objects from a possible 626. plFiberPlate : 23 possible sky positions to use as objects from a possible 625. plFiberPlate : 35 possible sky positions to use as objects from a possible 624. plFiberPlate : 38 possible sky positions to use as objects from a possible 623. plFiberPlate : 50 possible sky positions to use as objects from a possible 622. plFiberPlate : 73 possible sky positions to use as objects from a possible 621. plFiberPlate : 58 possible sky positions to use as objects from a possible 620. plFiberPlate : 37 possible sky positions to use as objects from a possible 619. plFiberPlate : 11 possible sky positions to use as objects from a possible 618. plFiberPlate : 11 possible sky positions to use as objects from a possible 617. plFiberPlate : 10 possible sky positions to use as objects from a possible 616. plFiberPlate : 14 possible sky positions to use as objects from a possible 615. plFiberPlate : 16 possible sky positions to use as objects from a possible 614. plFiberPlate : 23 possible sky positions to use as objects from a possible 613. plFiberPlate : 60 possible sky positions to use as objects from a possible 612. plFiberPlate : 49 possible sky positions to use as objects from a possible 611. plFiberPlate : 36 possible sky positions to use as objects from a possible 610. plFiberPlate : 21 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 12 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 25 possible sky positions to use as objects from a possible 604. plFiberPlate : 55 possible sky positions to use as objects from a possible 603. plFiberPlate : 60 possible sky positions to use as objects from a possible 602. plFiberPlate : 27 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : 19 possible sky positions to use as objects from a possible 599. plFiberPlate : 23 possible sky positions to use as objects from a possible 598. plFiberPlate : 28 possible sky positions to use as objects from a possible 597. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1983.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1984.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1984.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1985.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 124 2 5 107 3 5 86 4 4 103 5 9 124 6 8 116 7 8 109 8 15 117 9 9 119 10 11 142 11 8 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 19 95 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 29 28 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 407 58 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 202 12 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 417 60 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 416 12 plFiberPlate : adding spectro-photo std with objId = 4382 40 5 26 19 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 407 112 plFiberPlate : 106 possible sky positions to use as objects from a possible 625. plFiberPlate : 63 possible sky positions to use as objects from a possible 624. plFiberPlate : 42 possible sky positions to use as objects from a possible 623. plFiberPlate : 37 possible sky positions to use as objects from a possible 622. plFiberPlate : 41 possible sky positions to use as objects from a possible 621. plFiberPlate : 30 possible sky positions to use as objects from a possible 620. plFiberPlate : 47 possible sky positions to use as objects from a possible 619. plFiberPlate : 85 possible sky positions to use as objects from a possible 618. plFiberPlate : 37 possible sky positions to use as objects from a possible 617. plFiberPlate : 27 possible sky positions to use as objects from a possible 616. plFiberPlate : 17 possible sky positions to use as objects from a possible 615. plFiberPlate : 20 possible sky positions to use as objects from a possible 614. plFiberPlate : 23 possible sky positions to use as objects from a possible 613. plFiberPlate : 7 possible sky positions to use as objects from a possible 612. plFiberPlate : 11 possible sky positions to use as objects from a possible 611. plFiberPlate : 26 possible sky positions to use as objects from a possible 610. plFiberPlate : 41 possible sky positions to use as objects from a possible 609. plFiberPlate : 26 possible sky positions to use as objects from a possible 608. plFiberPlate : 18 possible sky positions to use as objects from a possible 607. plFiberPlate : 7 possible sky positions to use as objects from a possible 606. plFiberPlate : 9 possible sky positions to use as objects from a possible 605. plFiberPlate : 3 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 7 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 85 possible sky positions to use as objects from a possible 600. plFiberPlate : 64 possible sky positions to use as objects from a possible 599. plFiberPlate : 38 possible sky positions to use as objects from a possible 598. plFiberPlate : 39 possible sky positions to use as objects from a possible 597. plFiberPlate : 24 possible sky positions to use as objects from a possible 596. plFiberPlate : 24 possible sky positions to use as objects from a possible 595. plFiberPlate : 28 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1984.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1985.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1985.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1986.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 118 2 8 90 3 7 91 4 6 97 5 8 113 6 10 97 7 9 93 8 8 117 9 6 99 10 11 144 11 15 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 381 49 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 380 27 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 389 89 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 463 53 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 453 56 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 385 33 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 460 93 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 456 6 plFiberPlate : 111 possible sky positions to use as objects from a possible 588. plFiberPlate : 101 possible sky positions to use as objects from a possible 587. plFiberPlate : 71 possible sky positions to use as objects from a possible 586. plFiberPlate : 41 possible sky positions to use as objects from a possible 585. plFiberPlate : 20 possible sky positions to use as objects from a possible 584. plFiberPlate : 25 possible sky positions to use as objects from a possible 583. plFiberPlate : 70 possible sky positions to use as objects from a possible 582. plFiberPlate : 68 possible sky positions to use as objects from a possible 581. plFiberPlate : 53 possible sky positions to use as objects from a possible 580. plFiberPlate : 35 possible sky positions to use as objects from a possible 579. plFiberPlate : 19 possible sky positions to use as objects from a possible 578. plFiberPlate : 7 possible sky positions to use as objects from a possible 577. plFiberPlate : 9 possible sky positions to use as objects from a possible 576. plFiberPlate : 17 possible sky positions to use as objects from a possible 575. plFiberPlate : 30 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 54 possible sky positions to use as objects from a possible 572. plFiberPlate : 42 possible sky positions to use as objects from a possible 571. plFiberPlate : 28 possible sky positions to use as objects from a possible 570. plFiberPlate : 24 possible sky positions to use as objects from a possible 569. plFiberPlate : 16 possible sky positions to use as objects from a possible 568. plFiberPlate : 11 possible sky positions to use as objects from a possible 567. plFiberPlate : 6 possible sky positions to use as objects from a possible 566. plFiberPlate : 37 possible sky positions to use as objects from a possible 565. plFiberPlate : 24 possible sky positions to use as objects from a possible 564. plFiberPlate : 50 possible sky positions to use as objects from a possible 563. plFiberPlate : 41 possible sky positions to use as objects from a possible 562. plFiberPlate : 38 possible sky positions to use as objects from a possible 561. plFiberPlate : 25 possible sky positions to use as objects from a possible 560. plFiberPlate : 19 possible sky positions to use as objects from a possible 559. plFiberPlate : 30 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1985.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1986.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1986.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1987.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 128 2 7 99 3 10 84 4 7 109 5 1 122 6 3 92 7 1 89 8 6 113 9 6 111 10 9 155 11 9 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 213 40 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 484 28 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 479 134 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 140 37 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 219 2 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 488 22 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 488 80 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 138 76 plFiberPlate : 127 possible sky positions to use as objects from a possible 611. plFiberPlate : 73 possible sky positions to use as objects from a possible 610. plFiberPlate : 42 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 37 possible sky positions to use as objects from a possible 607. plFiberPlate : 29 possible sky positions to use as objects from a possible 606. plFiberPlate : 58 possible sky positions to use as objects from a possible 605. plFiberPlate : 70 possible sky positions to use as objects from a possible 604. plFiberPlate : 57 possible sky positions to use as objects from a possible 603. plFiberPlate : 36 possible sky positions to use as objects from a possible 602. plFiberPlate : 28 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 17 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 11 possible sky positions to use as objects from a possible 597. plFiberPlate : 34 possible sky positions to use as objects from a possible 596. plFiberPlate : 64 possible sky positions to use as objects from a possible 595. plFiberPlate : 47 possible sky positions to use as objects from a possible 594. plFiberPlate : 32 possible sky positions to use as objects from a possible 593. plFiberPlate : 20 possible sky positions to use as objects from a possible 592. plFiberPlate : 5 possible sky positions to use as objects from a possible 591. plFiberPlate : 11 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : 9 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 49 possible sky positions to use as objects from a possible 586. plFiberPlate : 40 possible sky positions to use as objects from a possible 585. plFiberPlate : 23 possible sky positions to use as objects from a possible 584. plFiberPlate : 9 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 18 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1986.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1987.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1987.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1988.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 110 2 12 98 3 9 88 4 9 96 5 5 122 6 2 110 7 10 108 8 11 118 9 9 110 10 18 134 11 9 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 353 6 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 273 43 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 275 117 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 287 40 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 360 8 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 357 34 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 351 90 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 354 5 plFiberPlate : 111 possible sky positions to use as objects from a possible 603. plFiberPlate : 67 possible sky positions to use as objects from a possible 602. plFiberPlate : 44 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 33 possible sky positions to use as objects from a possible 599. plFiberPlate : 37 possible sky positions to use as objects from a possible 598. plFiberPlate : 47 possible sky positions to use as objects from a possible 597. plFiberPlate : 78 possible sky positions to use as objects from a possible 596. plFiberPlate : 49 possible sky positions to use as objects from a possible 595. plFiberPlate : 23 possible sky positions to use as objects from a possible 594. plFiberPlate : 18 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 5 possible sky positions to use as objects from a possible 589. plFiberPlate : 35 possible sky positions to use as objects from a possible 588. plFiberPlate : 33 possible sky positions to use as objects from a possible 587. plFiberPlate : 34 possible sky positions to use as objects from a possible 586. plFiberPlate : 32 possible sky positions to use as objects from a possible 585. plFiberPlate : 20 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 13 possible sky positions to use as objects from a possible 581. plFiberPlate : 15 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 93 possible sky positions to use as objects from a possible 578. plFiberPlate : 80 possible sky positions to use as objects from a possible 577. plFiberPlate : 44 possible sky positions to use as objects from a possible 576. plFiberPlate : 36 possible sky positions to use as objects from a possible 575. plFiberPlate : 33 possible sky positions to use as objects from a possible 574. plFiberPlate : 39 possible sky positions to use as objects from a possible 573. plFiberPlate : 22 possible sky positions to use as objects from a possible 572. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1987.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1988.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1988.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1989.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 124 2 3 96 3 3 81 4 7 103 5 11 131 6 3 108 7 10 99 8 12 103 9 10 102 10 4 143 11 2 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 64 28 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 417 24 plFiberPlate : adding spectro-photo std with objId = 4470 40 3 60 29 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 414 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 64 2 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 59 40 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 215 53 plFiberPlate : adding spectro-photo std with objId = 4382 40 1 41 30 plFiberPlate : 125 possible sky positions to use as objects from a possible 610. plFiberPlate : 70 possible sky positions to use as objects from a possible 609. plFiberPlate : 30 possible sky positions to use as objects from a possible 608. plFiberPlate : 23 possible sky positions to use as objects from a possible 607. plFiberPlate : 30 possible sky positions to use as objects from a possible 606. plFiberPlate : 35 possible sky positions to use as objects from a possible 605. plFiberPlate : 53 possible sky positions to use as objects from a possible 604. plFiberPlate : 82 possible sky positions to use as objects from a possible 603. plFiberPlate : 63 possible sky positions to use as objects from a possible 602. plFiberPlate : 47 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 2 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : 30 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 70 possible sky positions to use as objects from a possible 594. plFiberPlate : 45 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 6 possible sky positions to use as objects from a possible 590. plFiberPlate : 11 possible sky positions to use as objects from a possible 589. plFiberPlate : 9 possible sky positions to use as objects from a possible 588. plFiberPlate : 14 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 71 possible sky positions to use as objects from a possible 585. plFiberPlate : 48 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 9 possible sky positions to use as objects from a possible 582. plFiberPlate : 17 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : 30 possible sky positions to use as objects from a possible 579. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1988.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1989.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1989.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1990.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 69 2 1 9 3 1 23 4 6 78 5 9 118 6 5 100 7 4 88 8 7 110 9 7 109 10 2 81 11 1 52 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 11 at 93.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 160 29 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 61 74 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 64 2 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 54 41 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 67 31 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 59 20 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 62 49 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 61 57 plFiberPlate : 78 possible sky positions to use as objects from a possible 464. plFiberPlate : 60 possible sky positions to use as objects from a possible 463. plFiberPlate : 48 possible sky positions to use as objects from a possible 462. plFiberPlate : 28 possible sky positions to use as objects from a possible 461. plFiberPlate : 17 possible sky positions to use as objects from a possible 460. plFiberPlate : 36 possible sky positions to use as objects from a possible 459. plFiberPlate : 37 possible sky positions to use as objects from a possible 458. plFiberPlate : 68 possible sky positions to use as objects from a possible 457. plFiberPlate : 39 possible sky positions to use as objects from a possible 456. plFiberPlate : 33 possible sky positions to use as objects from a possible 455. plFiberPlate : 25 possible sky positions to use as objects from a possible 454. plFiberPlate : 9 possible sky positions to use as objects from a possible 453. plFiberPlate : 15 possible sky positions to use as objects from a possible 452. plFiberPlate : 12 possible sky positions to use as objects from a possible 451. plFiberPlate : 10 possible sky positions to use as objects from a possible 450. plFiberPlate : 35 possible sky positions to use as objects from a possible 449. plFiberPlate : 54 possible sky positions to use as objects from a possible 448. plFiberPlate : 43 possible sky positions to use as objects from a possible 447. plFiberPlate : 28 possible sky positions to use as objects from a possible 446. plFiberPlate : 14 possible sky positions to use as objects from a possible 445. plFiberPlate : 10 possible sky positions to use as objects from a possible 444. plFiberPlate : 19 possible sky positions to use as objects from a possible 443. plFiberPlate : 9 possible sky positions to use as objects from a possible 442. plFiberPlate : 17 possible sky positions to use as objects from a possible 441. plFiberPlate : 7 possible sky positions to use as objects from a possible 440. plFiberPlate : 50 possible sky positions to use as objects from a possible 439. plFiberPlate : 28 possible sky positions to use as objects from a possible 438. plFiberPlate : 19 possible sky positions to use as objects from a possible 437. plFiberPlate : 3 possible sky positions to use as objects from a possible 436. plFiberPlate : 9 possible sky positions to use as objects from a possible 435. plFiberPlate : 6 possible sky positions to use as objects from a possible 434. plFiberPlate : 8 possible sky positions to use as objects from a possible 433. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1989.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1990.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1990.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1991.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 85 2 1 31 3 8 42 4 17 88 5 16 124 6 10 97 7 7 87 8 8 111 9 11 97 10 9 108 11 5 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 124 39 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 140 23 plFiberPlate : adding spectro-photo std with objId = 4599 40 1 60 57 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 131 46 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 135 12 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 65 22 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 133 6 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 66 105 plFiberPlate : 99 possible sky positions to use as objects from a possible 499. plFiberPlate : 65 possible sky positions to use as objects from a possible 498. plFiberPlate : 36 possible sky positions to use as objects from a possible 497. plFiberPlate : 23 possible sky positions to use as objects from a possible 496. plFiberPlate : 14 possible sky positions to use as objects from a possible 495. plFiberPlate : 18 possible sky positions to use as objects from a possible 494. plFiberPlate : 30 possible sky positions to use as objects from a possible 493. plFiberPlate : 68 possible sky positions to use as objects from a possible 492. plFiberPlate : 47 possible sky positions to use as objects from a possible 491. plFiberPlate : 35 possible sky positions to use as objects from a possible 490. plFiberPlate : 18 possible sky positions to use as objects from a possible 489. plFiberPlate : 13 possible sky positions to use as objects from a possible 488. plFiberPlate : 8 possible sky positions to use as objects from a possible 487. plFiberPlate : 9 possible sky positions to use as objects from a possible 486. plFiberPlate : 17 possible sky positions to use as objects from a possible 485. plFiberPlate : 19 possible sky positions to use as objects from a possible 484. plFiberPlate : 64 possible sky positions to use as objects from a possible 483. plFiberPlate : 29 possible sky positions to use as objects from a possible 482. plFiberPlate : 19 possible sky positions to use as objects from a possible 481. plFiberPlate : 17 possible sky positions to use as objects from a possible 480. plFiberPlate : 9 possible sky positions to use as objects from a possible 479. plFiberPlate : 12 possible sky positions to use as objects from a possible 478. plFiberPlate : 17 possible sky positions to use as objects from a possible 477. plFiberPlate : 10 possible sky positions to use as objects from a possible 476. plFiberPlate : 20 possible sky positions to use as objects from a possible 475. plFiberPlate : 50 possible sky positions to use as objects from a possible 474. plFiberPlate : 32 possible sky positions to use as objects from a possible 473. plFiberPlate : 24 possible sky positions to use as objects from a possible 472. plFiberPlate : 21 possible sky positions to use as objects from a possible 471. plFiberPlate : 12 possible sky positions to use as objects from a possible 470. plFiberPlate : 20 possible sky positions to use as objects from a possible 469. plFiberPlate : 18 possible sky positions to use as objects from a possible 468. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1990.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1991.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1991.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1992.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 132 2 9 94 3 11 83 4 8 111 5 11 128 6 14 101 7 15 90 8 10 114 9 11 95 10 11 151 11 7 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 184 22 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 192 2 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 192 37 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 182 44 plFiberPlate : adding spectro-photo std with objId = 4470 40 5 26 43 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 385 33 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 189 25 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 460 93 plFiberPlate : 119 possible sky positions to use as objects from a possible 620. plFiberPlate : 87 possible sky positions to use as objects from a possible 619. plFiberPlate : 42 possible sky positions to use as objects from a possible 618. plFiberPlate : 33 possible sky positions to use as objects from a possible 617. plFiberPlate : 17 possible sky positions to use as objects from a possible 616. plFiberPlate : 40 possible sky positions to use as objects from a possible 615. plFiberPlate : 35 possible sky positions to use as objects from a possible 614. plFiberPlate : 102 possible sky positions to use as objects from a possible 613. plFiberPlate : 66 possible sky positions to use as objects from a possible 612. plFiberPlate : 49 possible sky positions to use as objects from a possible 611. plFiberPlate : 24 possible sky positions to use as objects from a possible 610. plFiberPlate : 7 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 22 possible sky positions to use as objects from a possible 606. plFiberPlate : 35 possible sky positions to use as objects from a possible 605. plFiberPlate : 86 possible sky positions to use as objects from a possible 604. plFiberPlate : 56 possible sky positions to use as objects from a possible 603. plFiberPlate : 44 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 12 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 7 possible sky positions to use as objects from a possible 598. plFiberPlate : 30 possible sky positions to use as objects from a possible 597. plFiberPlate : 24 possible sky positions to use as objects from a possible 596. plFiberPlate : 72 possible sky positions to use as objects from a possible 595. plFiberPlate : 54 possible sky positions to use as objects from a possible 594. plFiberPlate : 30 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 19 possible sky positions to use as objects from a possible 591. plFiberPlate : 29 possible sky positions to use as objects from a possible 590. plFiberPlate : 24 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1991.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1992.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1992.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1993.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 114 2 3 99 3 4 92 4 5 106 5 5 131 6 7 107 7 6 105 8 3 113 9 6 108 10 4 135 11 2 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 199 23 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 205 38 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 198 34 plFiberPlate : adding spectro-photo std with objId = 4512 40 3 46 17 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 204 90 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 545 88 plFiberPlate : adding spectro-photo std with objId = 4470 40 3 109 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 1 117 53 plFiberPlate : 125 possible sky positions to use as objects from a possible 620. plFiberPlate : 65 possible sky positions to use as objects from a possible 619. plFiberPlate : 27 possible sky positions to use as objects from a possible 618. plFiberPlate : 21 possible sky positions to use as objects from a possible 617. plFiberPlate : 20 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 59 possible sky positions to use as objects from a possible 614. plFiberPlate : 56 possible sky positions to use as objects from a possible 613. plFiberPlate : 40 possible sky positions to use as objects from a possible 612. plFiberPlate : 27 possible sky positions to use as objects from a possible 611. plFiberPlate : 15 possible sky positions to use as objects from a possible 610. plFiberPlate : 23 possible sky positions to use as objects from a possible 609. plFiberPlate : 4 possible sky positions to use as objects from a possible 608. plFiberPlate : 10 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 11 possible sky positions to use as objects from a possible 605. plFiberPlate : 67 possible sky positions to use as objects from a possible 604. plFiberPlate : 49 possible sky positions to use as objects from a possible 603. plFiberPlate : 26 possible sky positions to use as objects from a possible 602. plFiberPlate : 20 possible sky positions to use as objects from a possible 601. plFiberPlate : 16 possible sky positions to use as objects from a possible 600. plFiberPlate : 15 possible sky positions to use as objects from a possible 599. plFiberPlate : 6 possible sky positions to use as objects from a possible 598. plFiberPlate : 3 possible sky positions to use as objects from a possible 597. plFiberPlate : 11 possible sky positions to use as objects from a possible 596. plFiberPlate : 33 possible sky positions to use as objects from a possible 595. plFiberPlate : 42 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 25 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 18 possible sky positions to use as objects from a possible 590. plFiberPlate : 19 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1992.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1993.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1993.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1994.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 112 2 7 67 3 2 26 4 2 66 5 7 148 6 5 110 7 6 97 8 10 114 9 10 111 10 5 107 11 9 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 212 13 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 212 48 plFiberPlate : adding spectro-photo std with objId = 4646 40 5 15 6 plFiberPlate : adding spectro-photo std with objId = 4599 40 1 145 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 140 57 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 222 59 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 159 6 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 216 31 plFiberPlate : 49 possible sky positions to use as objects from a possible 555. plFiberPlate : 21 possible sky positions to use as objects from a possible 554. plFiberPlate : 20 possible sky positions to use as objects from a possible 553. plFiberPlate : 13 possible sky positions to use as objects from a possible 552. plFiberPlate : 8 possible sky positions to use as objects from a possible 551. plFiberPlate : 22 possible sky positions to use as objects from a possible 550. plFiberPlate : 29 possible sky positions to use as objects from a possible 549. plFiberPlate : 63 possible sky positions to use as objects from a possible 548. plFiberPlate : 39 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 23 possible sky positions to use as objects from a possible 544. plFiberPlate : 18 possible sky positions to use as objects from a possible 543. plFiberPlate : 10 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 6 possible sky positions to use as objects from a possible 540. plFiberPlate : 93 possible sky positions to use as objects from a possible 539. plFiberPlate : 57 possible sky positions to use as objects from a possible 538. plFiberPlate : 32 possible sky positions to use as objects from a possible 537. plFiberPlate : 15 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : 20 possible sky positions to use as objects from a possible 533. plFiberPlate : 12 possible sky positions to use as objects from a possible 532. plFiberPlate : 17 possible sky positions to use as objects from a possible 531. plFiberPlate : 70 possible sky positions to use as objects from a possible 530. plFiberPlate : 40 possible sky positions to use as objects from a possible 529. plFiberPlate : 21 possible sky positions to use as objects from a possible 528. plFiberPlate : 19 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 19 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1993.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1994.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1994.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1995.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 130 2 9 105 3 10 91 4 10 104 5 7 139 6 6 117 7 6 108 8 8 116 9 5 123 10 10 149 11 7 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 446 59 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 370 25 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 361 22 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 433 59 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 448 24 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 357 110 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 357 6 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 444 70 plFiberPlate : 108 possible sky positions to use as objects from a possible 637. plFiberPlate : 69 possible sky positions to use as objects from a possible 636. plFiberPlate : 54 possible sky positions to use as objects from a possible 635. plFiberPlate : 28 possible sky positions to use as objects from a possible 634. plFiberPlate : 29 possible sky positions to use as objects from a possible 633. plFiberPlate : 40 possible sky positions to use as objects from a possible 632. plFiberPlate : 67 possible sky positions to use as objects from a possible 631. plFiberPlate : 66 possible sky positions to use as objects from a possible 630. plFiberPlate : 51 possible sky positions to use as objects from a possible 629. plFiberPlate : 39 possible sky positions to use as objects from a possible 628. plFiberPlate : 18 possible sky positions to use as objects from a possible 627. plFiberPlate : 12 possible sky positions to use as objects from a possible 626. plFiberPlate : 6 possible sky positions to use as objects from a possible 625. plFiberPlate : 10 possible sky positions to use as objects from a possible 624. plFiberPlate : 32 possible sky positions to use as objects from a possible 623. plFiberPlate : 18 possible sky positions to use as objects from a possible 622. plFiberPlate : 33 possible sky positions to use as objects from a possible 621. plFiberPlate : 18 possible sky positions to use as objects from a possible 620. plFiberPlate : 10 possible sky positions to use as objects from a possible 619. plFiberPlate : 3 possible sky positions to use as objects from a possible 618. plFiberPlate : 7 possible sky positions to use as objects from a possible 617. plFiberPlate : 12 possible sky positions to use as objects from a possible 616. plFiberPlate : 1 possible sky positions to use as objects from a possible 615. plFiberPlate : 5 possible sky positions to use as objects from a possible 614. plFiberPlate : 14 possible sky positions to use as objects from a possible 613. plFiberPlate : 99 possible sky positions to use as objects from a possible 612. plFiberPlate : 50 possible sky positions to use as objects from a possible 611. plFiberPlate : 51 possible sky positions to use as objects from a possible 610. plFiberPlate : 31 possible sky positions to use as objects from a possible 609. plFiberPlate : 37 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 23 possible sky positions to use as objects from a possible 606. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1994.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1995.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1995.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1996.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 134 2 10 88 3 6 85 4 8 94 5 5 131 6 5 110 7 11 102 8 12 117 9 7 123 10 12 148 11 10 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 302 65 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 381 48 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 381 3 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 307 35 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 385 77 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 382 70 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 314 11 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 303 32 plFiberPlate : 106 possible sky positions to use as objects from a possible 625. plFiberPlate : 66 possible sky positions to use as objects from a possible 624. plFiberPlate : 42 possible sky positions to use as objects from a possible 623. plFiberPlate : 16 possible sky positions to use as objects from a possible 622. plFiberPlate : 28 possible sky positions to use as objects from a possible 621. plFiberPlate : 26 possible sky positions to use as objects from a possible 620. plFiberPlate : 35 possible sky positions to use as objects from a possible 619. plFiberPlate : 71 possible sky positions to use as objects from a possible 618. plFiberPlate : 63 possible sky positions to use as objects from a possible 617. plFiberPlate : 47 possible sky positions to use as objects from a possible 616. plFiberPlate : 35 possible sky positions to use as objects from a possible 615. plFiberPlate : 16 possible sky positions to use as objects from a possible 614. plFiberPlate : 19 possible sky positions to use as objects from a possible 613. plFiberPlate : 21 possible sky positions to use as objects from a possible 612. plFiberPlate : 19 possible sky positions to use as objects from a possible 611. plFiberPlate : 30 possible sky positions to use as objects from a possible 610. plFiberPlate : 46 possible sky positions to use as objects from a possible 609. plFiberPlate : 21 possible sky positions to use as objects from a possible 608. plFiberPlate : 16 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 6 possible sky positions to use as objects from a possible 604. plFiberPlate : 5 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 28 possible sky positions to use as objects from a possible 601. plFiberPlate : 97 possible sky positions to use as objects from a possible 600. plFiberPlate : 65 possible sky positions to use as objects from a possible 599. plFiberPlate : 48 possible sky positions to use as objects from a possible 598. plFiberPlate : 35 possible sky positions to use as objects from a possible 597. plFiberPlate : 27 possible sky positions to use as objects from a possible 596. plFiberPlate : 25 possible sky positions to use as objects from a possible 595. plFiberPlate : 33 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1995.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1996.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1996.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1997.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 122 2 9 92 3 9 90 4 10 103 5 15 147 6 9 114 7 8 105 8 6 118 9 10 121 10 8 146 11 5 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 189 10 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 179 12 plFiberPlate : adding spectro-photo std with objId = 4504 40 3 120 16 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 328 18 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 326 49 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 404 17 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 127 26 plFiberPlate : adding spectro-photo std with objId = 4392 40 5 185 26 plFiberPlate : 124 possible sky positions to use as objects from a possible 642. plFiberPlate : 74 possible sky positions to use as objects from a possible 641. plFiberPlate : 34 possible sky positions to use as objects from a possible 640. plFiberPlate : 21 possible sky positions to use as objects from a possible 639. plFiberPlate : 28 possible sky positions to use as objects from a possible 638. plFiberPlate : 36 possible sky positions to use as objects from a possible 637. plFiberPlate : 46 possible sky positions to use as objects from a possible 636. plFiberPlate : 84 possible sky positions to use as objects from a possible 635. plFiberPlate : 60 possible sky positions to use as objects from a possible 634. plFiberPlate : 25 possible sky positions to use as objects from a possible 633. plFiberPlate : 17 possible sky positions to use as objects from a possible 632. plFiberPlate : 10 possible sky positions to use as objects from a possible 631. plFiberPlate : 14 possible sky positions to use as objects from a possible 630. plFiberPlate : 11 possible sky positions to use as objects from a possible 629. plFiberPlate : 8 possible sky positions to use as objects from a possible 628. plFiberPlate : 29 possible sky positions to use as objects from a possible 627. plFiberPlate : 88 possible sky positions to use as objects from a possible 626. plFiberPlate : 58 possible sky positions to use as objects from a possible 625. plFiberPlate : 33 possible sky positions to use as objects from a possible 624. plFiberPlate : 25 possible sky positions to use as objects from a possible 623. plFiberPlate : 18 possible sky positions to use as objects from a possible 622. plFiberPlate : 10 possible sky positions to use as objects from a possible 621. plFiberPlate : 14 possible sky positions to use as objects from a possible 620. plFiberPlate : 23 possible sky positions to use as objects from a possible 619. plFiberPlate : 18 possible sky positions to use as objects from a possible 618. plFiberPlate : 104 possible sky positions to use as objects from a possible 617. plFiberPlate : 81 possible sky positions to use as objects from a possible 616. plFiberPlate : 45 possible sky positions to use as objects from a possible 615. plFiberPlate : 27 possible sky positions to use as objects from a possible 614. plFiberPlate : 38 possible sky positions to use as objects from a possible 613. plFiberPlate : 18 possible sky positions to use as objects from a possible 612. plFiberPlate : 29 possible sky positions to use as objects from a possible 611. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1996.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1997.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1997.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1998.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 10 85 3 4 94 4 8 117 5 11 153 6 4 119 7 8 94 8 7 96 9 8 110 10 10 135 11 12 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 312 76 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 321 39 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 251 18 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 322 69 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 239 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 248 35 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 255 25 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 249 89 plFiberPlate : 133 possible sky positions to use as objects from a possible 615. plFiberPlate : 66 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 15 possible sky positions to use as objects from a possible 612. plFiberPlate : 9 possible sky positions to use as objects from a possible 611. plFiberPlate : 33 possible sky positions to use as objects from a possible 610. plFiberPlate : 47 possible sky positions to use as objects from a possible 609. plFiberPlate : 82 possible sky positions to use as objects from a possible 608. plFiberPlate : 54 possible sky positions to use as objects from a possible 607. plFiberPlate : 23 possible sky positions to use as objects from a possible 606. plFiberPlate : 9 possible sky positions to use as objects from a possible 605. plFiberPlate : 9 possible sky positions to use as objects from a possible 604. plFiberPlate : 12 possible sky positions to use as objects from a possible 603. plFiberPlate : 16 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 30 possible sky positions to use as objects from a possible 600. plFiberPlate : 60 possible sky positions to use as objects from a possible 599. plFiberPlate : 32 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 6 possible sky positions to use as objects from a possible 596. plFiberPlate : 4 possible sky positions to use as objects from a possible 595. plFiberPlate : 6 possible sky positions to use as objects from a possible 594. plFiberPlate : 5 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 101 possible sky positions to use as objects from a possible 590. plFiberPlate : 31 possible sky positions to use as objects from a possible 589. plFiberPlate : 21 possible sky positions to use as objects from a possible 588. plFiberPlate : 35 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 19 possible sky positions to use as objects from a possible 585. plFiberPlate : 5 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1997.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1998.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1998.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-1999.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 129 2 5 97 3 11 88 4 5 116 5 3 126 6 2 92 7 5 100 8 6 114 9 7 107 10 15 143 11 9 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 167 2 plFiberPlate : adding spectro-photo std with objId = 4599 40 6 95 10 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 102 19 plFiberPlate : adding spectro-photo std with objId = 4599 40 4 97 14 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 94 21 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 437 94 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 449 3 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 176 46 plFiberPlate : 116 possible sky positions to use as objects from a possible 633. plFiberPlate : 71 possible sky positions to use as objects from a possible 632. plFiberPlate : 48 possible sky positions to use as objects from a possible 631. plFiberPlate : 16 possible sky positions to use as objects from a possible 630. plFiberPlate : 35 possible sky positions to use as objects from a possible 629. plFiberPlate : 38 possible sky positions to use as objects from a possible 628. plFiberPlate : 46 possible sky positions to use as objects from a possible 627. plFiberPlate : 91 possible sky positions to use as objects from a possible 626. plFiberPlate : 54 possible sky positions to use as objects from a possible 625. plFiberPlate : 39 possible sky positions to use as objects from a possible 624. plFiberPlate : 29 possible sky positions to use as objects from a possible 623. plFiberPlate : 10 possible sky positions to use as objects from a possible 622. plFiberPlate : 11 possible sky positions to use as objects from a possible 621. plFiberPlate : 5 possible sky positions to use as objects from a possible 620. plFiberPlate : 34 possible sky positions to use as objects from a possible 619. plFiberPlate : 23 possible sky positions to use as objects from a possible 618. plFiberPlate : 88 possible sky positions to use as objects from a possible 617. plFiberPlate : 67 possible sky positions to use as objects from a possible 616. plFiberPlate : 43 possible sky positions to use as objects from a possible 615. plFiberPlate : 35 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 15 possible sky positions to use as objects from a possible 612. plFiberPlate : 16 possible sky positions to use as objects from a possible 611. plFiberPlate : 10 possible sky positions to use as objects from a possible 610. plFiberPlate : 28 possible sky positions to use as objects from a possible 609. plFiberPlate : 41 possible sky positions to use as objects from a possible 608. plFiberPlate : 42 possible sky positions to use as objects from a possible 607. plFiberPlate : 25 possible sky positions to use as objects from a possible 606. plFiberPlate : 11 possible sky positions to use as objects from a possible 605. plFiberPlate : 9 possible sky positions to use as objects from a possible 604. plFiberPlate : 18 possible sky positions to use as objects from a possible 603. plFiberPlate : 32 possible sky positions to use as objects from a possible 602. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1998.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1999.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1999.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2000.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 117 2 7 97 3 8 93 4 7 113 5 6 129 6 5 96 7 4 90 8 5 120 9 4 102 10 9 139 11 5 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 407 58 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 203 26 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 44 37 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 42 2 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 202 30 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 196 16 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 50 23 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 473 33 plFiberPlate : 115 possible sky positions to use as objects from a possible 620. plFiberPlate : 71 possible sky positions to use as objects from a possible 619. plFiberPlate : 44 possible sky positions to use as objects from a possible 618. plFiberPlate : 25 possible sky positions to use as objects from a possible 617. plFiberPlate : 23 possible sky positions to use as objects from a possible 616. plFiberPlate : 15 possible sky positions to use as objects from a possible 615. plFiberPlate : 55 possible sky positions to use as objects from a possible 614. plFiberPlate : 100 possible sky positions to use as objects from a possible 613. plFiberPlate : 48 possible sky positions to use as objects from a possible 612. plFiberPlate : 29 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 5 possible sky positions to use as objects from a possible 609. plFiberPlate : 17 possible sky positions to use as objects from a possible 608. plFiberPlate : 8 possible sky positions to use as objects from a possible 607. plFiberPlate : 19 possible sky positions to use as objects from a possible 606. plFiberPlate : 38 possible sky positions to use as objects from a possible 605. plFiberPlate : 81 possible sky positions to use as objects from a possible 604. plFiberPlate : 40 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 9 possible sky positions to use as objects from a possible 601. plFiberPlate : 7 possible sky positions to use as objects from a possible 600. plFiberPlate : 12 possible sky positions to use as objects from a possible 599. plFiberPlate : 14 possible sky positions to use as objects from a possible 598. plFiberPlate : 26 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 60 possible sky positions to use as objects from a possible 595. plFiberPlate : 47 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 9 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 31 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-1999.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2000.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2000.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2001.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 116 2 6 91 3 2 85 4 4 90 5 12 125 6 9 104 7 5 91 8 8 112 9 13 99 10 9 142 11 9 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 371 23 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 453 7 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 451 2 plFiberPlate : adding spectro-photo std with objId = 4470 40 5 17 29 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 175 25 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 161 74 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 230 12 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 227 12 plFiberPlate : 101 possible sky positions to use as objects from a possible 600. plFiberPlate : 80 possible sky positions to use as objects from a possible 599. plFiberPlate : 56 possible sky positions to use as objects from a possible 598. plFiberPlate : 34 possible sky positions to use as objects from a possible 597. plFiberPlate : 40 possible sky positions to use as objects from a possible 596. plFiberPlate : 33 possible sky positions to use as objects from a possible 595. plFiberPlate : 51 possible sky positions to use as objects from a possible 594. plFiberPlate : 66 possible sky positions to use as objects from a possible 593. plFiberPlate : 61 possible sky positions to use as objects from a possible 592. plFiberPlate : 50 possible sky positions to use as objects from a possible 591. plFiberPlate : 44 possible sky positions to use as objects from a possible 590. plFiberPlate : 25 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 27 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 34 possible sky positions to use as objects from a possible 585. plFiberPlate : 86 possible sky positions to use as objects from a possible 584. plFiberPlate : 64 possible sky positions to use as objects from a possible 583. plFiberPlate : 43 possible sky positions to use as objects from a possible 582. plFiberPlate : 21 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 12 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 10 possible sky positions to use as objects from a possible 577. plFiberPlate : 42 possible sky positions to use as objects from a possible 576. plFiberPlate : 48 possible sky positions to use as objects from a possible 575. plFiberPlate : 69 possible sky positions to use as objects from a possible 574. plFiberPlate : 26 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : 26 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2000.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2001.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2001.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2002.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 134 2 7 82 3 6 63 4 13 97 5 12 119 6 9 89 7 6 90 8 9 105 9 10 111 10 17 142 11 13 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 112 76 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 49 52 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 44 18 plFiberPlate : adding spectro-photo std with objId = 4646 40 1 45 7 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 40 16 plFiberPlate : adding spectro-photo std with objId = 4646 40 6 53 6 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 114 10 plFiberPlate : adding spectro-photo std with objId = 4646 40 6 52 38 plFiberPlate : 91 possible sky positions to use as objects from a possible 553. plFiberPlate : 55 possible sky positions to use as objects from a possible 552. plFiberPlate : 34 possible sky positions to use as objects from a possible 551. plFiberPlate : 18 possible sky positions to use as objects from a possible 550. plFiberPlate : 32 possible sky positions to use as objects from a possible 549. plFiberPlate : 43 possible sky positions to use as objects from a possible 548. plFiberPlate : 66 possible sky positions to use as objects from a possible 547. plFiberPlate : 64 possible sky positions to use as objects from a possible 546. plFiberPlate : 30 possible sky positions to use as objects from a possible 545. plFiberPlate : 24 possible sky positions to use as objects from a possible 544. plFiberPlate : 21 possible sky positions to use as objects from a possible 543. plFiberPlate : 14 possible sky positions to use as objects from a possible 542. plFiberPlate : 17 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 28 possible sky positions to use as objects from a possible 538. plFiberPlate : 76 possible sky positions to use as objects from a possible 537. plFiberPlate : 48 possible sky positions to use as objects from a possible 536. plFiberPlate : 33 possible sky positions to use as objects from a possible 535. plFiberPlate : 19 possible sky positions to use as objects from a possible 534. plFiberPlate : 9 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 11 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 24 possible sky positions to use as objects from a possible 528. plFiberPlate : 20 possible sky positions to use as objects from a possible 527. plFiberPlate : 15 possible sky positions to use as objects from a possible 526. plFiberPlate : 6 possible sky positions to use as objects from a possible 525. plFiberPlate : 10 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 9 possible sky positions to use as objects from a possible 522. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2001.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2002.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2002.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2003.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 122 2 7 96 3 6 99 4 5 107 5 7 127 6 7 113 7 10 92 8 11 91 9 8 108 10 13 161 11 12 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 1 184 2 plFiberPlate : adding spectro-photo std with objId = 4504 40 1 170 29 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 101 68 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 111 36 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 175 25 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 462 24 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 102 19 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 177 116 plFiberPlate : 125 possible sky positions to use as objects from a possible 605. plFiberPlate : 91 possible sky positions to use as objects from a possible 604. plFiberPlate : 28 possible sky positions to use as objects from a possible 603. plFiberPlate : 33 possible sky positions to use as objects from a possible 602. plFiberPlate : 37 possible sky positions to use as objects from a possible 601. plFiberPlate : 38 possible sky positions to use as objects from a possible 600. plFiberPlate : 38 possible sky positions to use as objects from a possible 599. plFiberPlate : 69 possible sky positions to use as objects from a possible 598. plFiberPlate : 52 possible sky positions to use as objects from a possible 597. plFiberPlate : 42 possible sky positions to use as objects from a possible 596. plFiberPlate : 21 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 12 possible sky positions to use as objects from a possible 592. plFiberPlate : 21 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 58 possible sky positions to use as objects from a possible 589. plFiberPlate : 40 possible sky positions to use as objects from a possible 588. plFiberPlate : 27 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 3 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 68 possible sky positions to use as objects from a possible 580. plFiberPlate : 58 possible sky positions to use as objects from a possible 579. plFiberPlate : 29 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 21 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2002.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2003.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2003.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2004.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 94 2 5 36 3 5 42 4 12 88 5 15 112 6 10 106 7 8 83 8 7 101 9 7 101 10 9 106 11 7 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 158 46 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 89 73 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 153 21 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 93 91 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 84 32 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 95 11 plFiberPlate : adding spectro-photo std with objId = 4599 40 4 97 14 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 156 28 plFiberPlate : 100 possible sky positions to use as objects from a possible 496. plFiberPlate : 73 possible sky positions to use as objects from a possible 495. plFiberPlate : 44 possible sky positions to use as objects from a possible 494. plFiberPlate : 30 possible sky positions to use as objects from a possible 493. plFiberPlate : 19 possible sky positions to use as objects from a possible 492. plFiberPlate : 11 possible sky positions to use as objects from a possible 491. plFiberPlate : 38 possible sky positions to use as objects from a possible 490. plFiberPlate : 65 possible sky positions to use as objects from a possible 489. plFiberPlate : 46 possible sky positions to use as objects from a possible 488. plFiberPlate : 21 possible sky positions to use as objects from a possible 487. plFiberPlate : 15 possible sky positions to use as objects from a possible 486. plFiberPlate : 7 possible sky positions to use as objects from a possible 485. plFiberPlate : 15 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 7 possible sky positions to use as objects from a possible 482. plFiberPlate : 31 possible sky positions to use as objects from a possible 481. plFiberPlate : 48 possible sky positions to use as objects from a possible 480. plFiberPlate : 32 possible sky positions to use as objects from a possible 479. plFiberPlate : 24 possible sky positions to use as objects from a possible 478. plFiberPlate : 14 possible sky positions to use as objects from a possible 477. plFiberPlate : 8 possible sky positions to use as objects from a possible 476. plFiberPlate : 4 possible sky positions to use as objects from a possible 475. plFiberPlate : 3 possible sky positions to use as objects from a possible 474. plFiberPlate : 9 possible sky positions to use as objects from a possible 473. plFiberPlate : 19 possible sky positions to use as objects from a possible 472. plFiberPlate : 54 possible sky positions to use as objects from a possible 471. plFiberPlate : 48 possible sky positions to use as objects from a possible 470. plFiberPlate : 56 possible sky positions to use as objects from a possible 469. plFiberPlate : 29 possible sky positions to use as objects from a possible 468. plFiberPlate : 23 possible sky positions to use as objects from a possible 467. plFiberPlate : 23 possible sky positions to use as objects from a possible 466. plFiberPlate : 31 possible sky positions to use as objects from a possible 465. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2003.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2004.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2004.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2005.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 102 2 12 97 3 9 94 4 6 112 5 8 126 6 9 108 7 8 109 8 5 107 9 8 111 10 14 141 11 7 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4382 40 4 99 7 plFiberPlate : adding spectro-photo std with objId = 4382 40 5 99 106 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 93 125 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 93 76 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 474 12 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 471 22 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 86 92 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 92 27 plFiberPlate : 106 possible sky positions to use as objects from a possible 613. plFiberPlate : 85 possible sky positions to use as objects from a possible 612. plFiberPlate : 59 possible sky positions to use as objects from a possible 611. plFiberPlate : 19 possible sky positions to use as objects from a possible 610. plFiberPlate : 39 possible sky positions to use as objects from a possible 609. plFiberPlate : 46 possible sky positions to use as objects from a possible 608. plFiberPlate : 36 possible sky positions to use as objects from a possible 607. plFiberPlate : 62 possible sky positions to use as objects from a possible 606. plFiberPlate : 40 possible sky positions to use as objects from a possible 605. plFiberPlate : 23 possible sky positions to use as objects from a possible 604. plFiberPlate : 6 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 9 possible sky positions to use as objects from a possible 601. plFiberPlate : 18 possible sky positions to use as objects from a possible 600. plFiberPlate : 7 possible sky positions to use as objects from a possible 599. plFiberPlate : 7 possible sky positions to use as objects from a possible 598. plFiberPlate : 27 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 16 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 4 possible sky positions to use as objects from a possible 593. plFiberPlate : 6 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 6 possible sky positions to use as objects from a possible 590. plFiberPlate : 12 possible sky positions to use as objects from a possible 589. plFiberPlate : 58 possible sky positions to use as objects from a possible 588. plFiberPlate : 19 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 23 possible sky positions to use as objects from a possible 584. plFiberPlate : 7 possible sky positions to use as objects from a possible 583. plFiberPlate : 24 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2004.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2005.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2005.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2006.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 130 2 3 109 3 6 93 4 8 106 5 6 138 6 5 108 7 8 96 8 7 112 9 6 98 10 8 147 11 6 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 4 158 55 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 500 6 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 227 5 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 511 78 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 164 44 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 219 2 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 155 14 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 500 96 plFiberPlate : 120 possible sky positions to use as objects from a possible 625. plFiberPlate : 50 possible sky positions to use as objects from a possible 624. plFiberPlate : 25 possible sky positions to use as objects from a possible 623. plFiberPlate : 27 possible sky positions to use as objects from a possible 622. plFiberPlate : 27 possible sky positions to use as objects from a possible 621. plFiberPlate : 28 possible sky positions to use as objects from a possible 620. plFiberPlate : 39 possible sky positions to use as objects from a possible 619. plFiberPlate : 71 possible sky positions to use as objects from a possible 618. plFiberPlate : 34 possible sky positions to use as objects from a possible 617. plFiberPlate : 24 possible sky positions to use as objects from a possible 616. plFiberPlate : 19 possible sky positions to use as objects from a possible 615. plFiberPlate : 10 possible sky positions to use as objects from a possible 614. plFiberPlate : 18 possible sky positions to use as objects from a possible 613. plFiberPlate : 10 possible sky positions to use as objects from a possible 612. plFiberPlate : 9 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 71 possible sky positions to use as objects from a possible 609. plFiberPlate : 26 possible sky positions to use as objects from a possible 608. plFiberPlate : 13 possible sky positions to use as objects from a possible 607. plFiberPlate : 5 possible sky positions to use as objects from a possible 606. plFiberPlate : 4 possible sky positions to use as objects from a possible 605. plFiberPlate : 5 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 18 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 68 possible sky positions to use as objects from a possible 600. plFiberPlate : 51 possible sky positions to use as objects from a possible 599. plFiberPlate : 24 possible sky positions to use as objects from a possible 598. plFiberPlate : 20 possible sky positions to use as objects from a possible 597. plFiberPlate : 19 possible sky positions to use as objects from a possible 596. plFiberPlate : 27 possible sky positions to use as objects from a possible 595. plFiberPlate : 23 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2005.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2006.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2006.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2007.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 125 2 6 104 3 4 99 4 7 108 5 1 118 6 5 103 7 6 96 8 6 109 9 4 113 10 12 144 11 9 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 338 61 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 267 12 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 258 13 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 334 17 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 262 73 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 255 25 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 329 75 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 60 60 plFiberPlate : 134 possible sky positions to use as objects from a possible 624. plFiberPlate : 69 possible sky positions to use as objects from a possible 623. plFiberPlate : 44 possible sky positions to use as objects from a possible 622. plFiberPlate : 23 possible sky positions to use as objects from a possible 621. plFiberPlate : 38 possible sky positions to use as objects from a possible 620. plFiberPlate : 39 possible sky positions to use as objects from a possible 619. plFiberPlate : 36 possible sky positions to use as objects from a possible 618. plFiberPlate : 74 possible sky positions to use as objects from a possible 617. plFiberPlate : 41 possible sky positions to use as objects from a possible 616. plFiberPlate : 27 possible sky positions to use as objects from a possible 615. plFiberPlate : 19 possible sky positions to use as objects from a possible 614. plFiberPlate : 8 possible sky positions to use as objects from a possible 613. plFiberPlate : 12 possible sky positions to use as objects from a possible 612. plFiberPlate : 15 possible sky positions to use as objects from a possible 611. plFiberPlate : 14 possible sky positions to use as objects from a possible 610. plFiberPlate : 24 possible sky positions to use as objects from a possible 609. plFiberPlate : 68 possible sky positions to use as objects from a possible 608. plFiberPlate : 38 possible sky positions to use as objects from a possible 607. plFiberPlate : 34 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 7 possible sky positions to use as objects from a possible 602. plFiberPlate : 19 possible sky positions to use as objects from a possible 601. plFiberPlate : 34 possible sky positions to use as objects from a possible 600. plFiberPlate : 40 possible sky positions to use as objects from a possible 599. plFiberPlate : 25 possible sky positions to use as objects from a possible 598. plFiberPlate : 31 possible sky positions to use as objects from a possible 597. plFiberPlate : 13 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2006.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2007.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2007.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2008.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 82 2 0 16 3 5 25 4 14 68 5 16 113 6 6 91 7 11 95 8 13 101 9 9 96 10 11 84 11 4 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 113 44 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 124 39 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 120 2 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 115 19 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 220 62 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 214 43 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 219 52 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 108 79 plFiberPlate : 64 possible sky positions to use as objects from a possible 454. plFiberPlate : 48 possible sky positions to use as objects from a possible 453. plFiberPlate : 25 possible sky positions to use as objects from a possible 452. plFiberPlate : 13 possible sky positions to use as objects from a possible 451. plFiberPlate : 15 possible sky positions to use as objects from a possible 450. plFiberPlate : 25 possible sky positions to use as objects from a possible 449. plFiberPlate : 35 possible sky positions to use as objects from a possible 448. plFiberPlate : 65 possible sky positions to use as objects from a possible 447. plFiberPlate : 38 possible sky positions to use as objects from a possible 446. plFiberPlate : 26 possible sky positions to use as objects from a possible 445. plFiberPlate : 14 possible sky positions to use as objects from a possible 444. plFiberPlate : 7 possible sky positions to use as objects from a possible 443. plFiberPlate : 10 possible sky positions to use as objects from a possible 442. plFiberPlate : 10 possible sky positions to use as objects from a possible 441. plFiberPlate : 19 possible sky positions to use as objects from a possible 440. plFiberPlate : 19 possible sky positions to use as objects from a possible 439. plFiberPlate : 49 possible sky positions to use as objects from a possible 438. plFiberPlate : 30 possible sky positions to use as objects from a possible 437. plFiberPlate : 22 possible sky positions to use as objects from a possible 436. plFiberPlate : 13 possible sky positions to use as objects from a possible 435. plFiberPlate : 8 possible sky positions to use as objects from a possible 434. plFiberPlate : 3 possible sky positions to use as objects from a possible 433. plFiberPlate : 13 possible sky positions to use as objects from a possible 432. plFiberPlate : 8 possible sky positions to use as objects from a possible 431. plFiberPlate : 29 possible sky positions to use as objects from a possible 430. plFiberPlate : 20 possible sky positions to use as objects from a possible 429. plFiberPlate : 22 possible sky positions to use as objects from a possible 428. plFiberPlate : 35 possible sky positions to use as objects from a possible 427. plFiberPlate : 17 possible sky positions to use as objects from a possible 426. plFiberPlate : 13 possible sky positions to use as objects from a possible 425. plFiberPlate : 14 possible sky positions to use as objects from a possible 424. plFiberPlate : 11 possible sky positions to use as objects from a possible 423. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2007.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2008.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2008.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2009.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 107 2 6 55 3 7 45 4 14 90 5 13 122 6 6 87 7 8 71 8 14 105 9 11 110 10 9 115 11 4 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4646 40 1 30 96 plFiberPlate : adding spectro-photo std with objId = 4646 40 6 34 24 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 95 12 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 95 92 plFiberPlate : adding spectro-photo std with objId = 4646 40 3 40 60 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 32 2 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 40 16 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 97 31 plFiberPlate : 100 possible sky positions to use as objects from a possible 526. plFiberPlate : 45 possible sky positions to use as objects from a possible 525. plFiberPlate : 39 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 35 possible sky positions to use as objects from a possible 522. plFiberPlate : 19 possible sky positions to use as objects from a possible 521. plFiberPlate : 29 possible sky positions to use as objects from a possible 520. plFiberPlate : 65 possible sky positions to use as objects from a possible 519. plFiberPlate : 50 possible sky positions to use as objects from a possible 518. plFiberPlate : 25 possible sky positions to use as objects from a possible 517. plFiberPlate : 24 possible sky positions to use as objects from a possible 516. plFiberPlate : 10 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 20 possible sky positions to use as objects from a possible 513. plFiberPlate : 14 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 82 possible sky positions to use as objects from a possible 510. plFiberPlate : 53 possible sky positions to use as objects from a possible 509. plFiberPlate : 35 possible sky positions to use as objects from a possible 508. plFiberPlate : 20 possible sky positions to use as objects from a possible 507. plFiberPlate : 13 possible sky positions to use as objects from a possible 506. plFiberPlate : 14 possible sky positions to use as objects from a possible 505. plFiberPlate : 14 possible sky positions to use as objects from a possible 504. plFiberPlate : 23 possible sky positions to use as objects from a possible 503. plFiberPlate : 19 possible sky positions to use as objects from a possible 502. plFiberPlate : 41 possible sky positions to use as objects from a possible 501. plFiberPlate : 44 possible sky positions to use as objects from a possible 500. plFiberPlate : 13 possible sky positions to use as objects from a possible 499. plFiberPlate : 7 possible sky positions to use as objects from a possible 498. plFiberPlate : 12 possible sky positions to use as objects from a possible 497. plFiberPlate : 11 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2008.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2009.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2009.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2010.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 121 2 3 96 3 4 87 4 8 112 5 9 132 6 4 113 7 4 103 8 7 113 9 9 119 10 4 148 11 4 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 192 2 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 39 22 plFiberPlate : adding spectro-photo std with objId = 4470 40 1 35 60 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 117 62 plFiberPlate : adding spectro-photo std with objId = 4470 40 1 32 40 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 472 42 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 119 21 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 475 6 plFiberPlate : 117 possible sky positions to use as objects from a possible 634. plFiberPlate : 72 possible sky positions to use as objects from a possible 633. plFiberPlate : 37 possible sky positions to use as objects from a possible 632. plFiberPlate : 21 possible sky positions to use as objects from a possible 631. plFiberPlate : 21 possible sky positions to use as objects from a possible 630. plFiberPlate : 28 possible sky positions to use as objects from a possible 629. plFiberPlate : 59 possible sky positions to use as objects from a possible 628. plFiberPlate : 66 possible sky positions to use as objects from a possible 627. plFiberPlate : 49 possible sky positions to use as objects from a possible 626. plFiberPlate : 31 possible sky positions to use as objects from a possible 625. plFiberPlate : 26 possible sky positions to use as objects from a possible 624. plFiberPlate : 22 possible sky positions to use as objects from a possible 623. plFiberPlate : 10 possible sky positions to use as objects from a possible 622. plFiberPlate : 10 possible sky positions to use as objects from a possible 621. plFiberPlate : 26 possible sky positions to use as objects from a possible 620. plFiberPlate : 26 possible sky positions to use as objects from a possible 619. plFiberPlate : 68 possible sky positions to use as objects from a possible 618. plFiberPlate : 52 possible sky positions to use as objects from a possible 617. plFiberPlate : 37 possible sky positions to use as objects from a possible 616. plFiberPlate : 31 possible sky positions to use as objects from a possible 615. plFiberPlate : 16 possible sky positions to use as objects from a possible 614. plFiberPlate : 21 possible sky positions to use as objects from a possible 613. plFiberPlate : 5 possible sky positions to use as objects from a possible 612. plFiberPlate : 11 possible sky positions to use as objects from a possible 611. plFiberPlate : 23 possible sky positions to use as objects from a possible 610. plFiberPlate : 72 possible sky positions to use as objects from a possible 609. plFiberPlate : 55 possible sky positions to use as objects from a possible 608. plFiberPlate : 35 possible sky positions to use as objects from a possible 607. plFiberPlate : 19 possible sky positions to use as objects from a possible 606. plFiberPlate : 22 possible sky positions to use as objects from a possible 605. plFiberPlate : 23 possible sky positions to use as objects from a possible 604. plFiberPlate : 28 possible sky positions to use as objects from a possible 603. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2009.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2010.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2010.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2011.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 97 2 4 32 3 1 15 4 7 70 5 16 117 6 11 100 7 8 101 8 10 117 9 12 108 10 11 82 11 9 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 77 21 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 85 37 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 85 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 91 28 plFiberPlate : adding spectro-photo std with objId = 4646 40 2 15 14 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 81 52 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 88 41 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 79 51 plFiberPlate : 71 possible sky positions to use as objects from a possible 475. plFiberPlate : 31 possible sky positions to use as objects from a possible 474. plFiberPlate : 16 possible sky positions to use as objects from a possible 473. plFiberPlate : 12 possible sky positions to use as objects from a possible 472. plFiberPlate : 22 possible sky positions to use as objects from a possible 471. plFiberPlate : 18 possible sky positions to use as objects from a possible 470. plFiberPlate : 44 possible sky positions to use as objects from a possible 469. plFiberPlate : 44 possible sky positions to use as objects from a possible 468. plFiberPlate : 27 possible sky positions to use as objects from a possible 467. plFiberPlate : 14 possible sky positions to use as objects from a possible 466. plFiberPlate : 5 possible sky positions to use as objects from a possible 465. plFiberPlate : 9 possible sky positions to use as objects from a possible 464. plFiberPlate : 6 possible sky positions to use as objects from a possible 463. plFiberPlate : 4 possible sky positions to use as objects from a possible 462. plFiberPlate : 25 possible sky positions to use as objects from a possible 461. plFiberPlate : 15 possible sky positions to use as objects from a possible 460. plFiberPlate : 61 possible sky positions to use as objects from a possible 459. plFiberPlate : 45 possible sky positions to use as objects from a possible 458. plFiberPlate : 40 possible sky positions to use as objects from a possible 457. plFiberPlate : 22 possible sky positions to use as objects from a possible 456. plFiberPlate : 6 possible sky positions to use as objects from a possible 455. plFiberPlate : 3 possible sky positions to use as objects from a possible 454. plFiberPlate : 4 possible sky positions to use as objects from a possible 453. plFiberPlate : 14 possible sky positions to use as objects from a possible 452. plFiberPlate : 30 possible sky positions to use as objects from a possible 451. plFiberPlate : 51 possible sky positions to use as objects from a possible 450. plFiberPlate : 34 possible sky positions to use as objects from a possible 449. plFiberPlate : 18 possible sky positions to use as objects from a possible 448. plFiberPlate : 9 possible sky positions to use as objects from a possible 447. plFiberPlate : 10 possible sky positions to use as objects from a possible 446. plFiberPlate : 12 possible sky positions to use as objects from a possible 445. plFiberPlate : 49 possible sky positions to use as objects from a possible 444. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2010.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2011.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2011.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2012.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 118 2 4 97 3 4 95 4 8 115 5 12 117 6 12 99 7 12 89 8 13 112 9 11 109 10 11 169 11 9 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 113 35 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 54 14 plFiberPlate : adding spectro-photo std with objId = 4504 40 3 120 16 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 39 13 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 111 113 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 51 10 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 385 70 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 178 65 plFiberPlate : 138 possible sky positions to use as objects from a possible 613. plFiberPlate : 113 possible sky positions to use as objects from a possible 612. plFiberPlate : 63 possible sky positions to use as objects from a possible 611. plFiberPlate : 37 possible sky positions to use as objects from a possible 610. plFiberPlate : 37 possible sky positions to use as objects from a possible 609. plFiberPlate : 36 possible sky positions to use as objects from a possible 608. plFiberPlate : 51 possible sky positions to use as objects from a possible 607. plFiberPlate : 78 possible sky positions to use as objects from a possible 606. plFiberPlate : 68 possible sky positions to use as objects from a possible 605. plFiberPlate : 41 possible sky positions to use as objects from a possible 604. plFiberPlate : 24 possible sky positions to use as objects from a possible 603. plFiberPlate : 18 possible sky positions to use as objects from a possible 602. plFiberPlate : 5 possible sky positions to use as objects from a possible 601. plFiberPlate : 10 possible sky positions to use as objects from a possible 600. plFiberPlate : 17 possible sky positions to use as objects from a possible 599. plFiberPlate : 32 possible sky positions to use as objects from a possible 598. plFiberPlate : 47 possible sky positions to use as objects from a possible 597. plFiberPlate : 39 possible sky positions to use as objects from a possible 596. plFiberPlate : 29 possible sky positions to use as objects from a possible 595. plFiberPlate : 19 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 3 possible sky positions to use as objects from a possible 592. plFiberPlate : 11 possible sky positions to use as objects from a possible 591. plFiberPlate : 7 possible sky positions to use as objects from a possible 590. plFiberPlate : 32 possible sky positions to use as objects from a possible 589. plFiberPlate : 54 possible sky positions to use as objects from a possible 588. plFiberPlate : 58 possible sky positions to use as objects from a possible 587. plFiberPlate : 37 possible sky positions to use as objects from a possible 586. plFiberPlate : 28 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 29 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2011.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2012.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2012.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2013.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 90 2 0 17 3 2 22 4 6 85 5 7 123 6 7 98 7 5 105 8 5 125 9 9 108 10 8 82 11 2 64 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 1 105 8 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 184 81 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 169 70 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 109 32 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 106 32 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 175 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 108 69 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 176 46 plFiberPlate : 84 possible sky positions to use as objects from a possible 499. plFiberPlate : 49 possible sky positions to use as objects from a possible 498. plFiberPlate : 21 possible sky positions to use as objects from a possible 497. plFiberPlate : 14 possible sky positions to use as objects from a possible 496. plFiberPlate : 9 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 40 possible sky positions to use as objects from a possible 493. plFiberPlate : 53 possible sky positions to use as objects from a possible 492. plFiberPlate : 33 possible sky positions to use as objects from a possible 491. plFiberPlate : 15 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 8 possible sky positions to use as objects from a possible 488. plFiberPlate : 3 possible sky positions to use as objects from a possible 487. plFiberPlate : 2 possible sky positions to use as objects from a possible 486. plFiberPlate : 2 possible sky positions to use as objects from a possible 485. plFiberPlate : 48 possible sky positions to use as objects from a possible 484. plFiberPlate : 44 possible sky positions to use as objects from a possible 483. plFiberPlate : 27 possible sky positions to use as objects from a possible 482. plFiberPlate : 25 possible sky positions to use as objects from a possible 481. plFiberPlate : 16 possible sky positions to use as objects from a possible 480. plFiberPlate : 10 possible sky positions to use as objects from a possible 479. plFiberPlate : 10 possible sky positions to use as objects from a possible 478. plFiberPlate : 5 possible sky positions to use as objects from a possible 477. plFiberPlate : 18 possible sky positions to use as objects from a possible 476. plFiberPlate : 22 possible sky positions to use as objects from a possible 475. plFiberPlate : 63 possible sky positions to use as objects from a possible 474. plFiberPlate : 43 possible sky positions to use as objects from a possible 473. plFiberPlate : 25 possible sky positions to use as objects from a possible 472. plFiberPlate : 17 possible sky positions to use as objects from a possible 471. plFiberPlate : 13 possible sky positions to use as objects from a possible 470. plFiberPlate : 18 possible sky positions to use as objects from a possible 469. plFiberPlate : 26 possible sky positions to use as objects from a possible 468. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2012.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2013.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2013.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2014.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 107 2 5 103 3 9 101 4 6 120 5 7 116 6 8 96 7 4 119 8 9 110 9 3 100 10 10 162 11 5 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4382 40 4 107 45 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 492 14 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 116 77 plFiberPlate : adding spectro-photo std with objId = 4382 40 3 116 9 plFiberPlate : adding spectro-photo std with objId = 4382 40 5 114 70 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 298 8 plFiberPlate : adding spectro-photo std with objId = 4382 40 5 103 73 plFiberPlate : adding spectro-photo std with objId = 4382 40 3 112 87 plFiberPlate : 103 possible sky positions to use as objects from a possible 622. plFiberPlate : 66 possible sky positions to use as objects from a possible 621. plFiberPlate : 59 possible sky positions to use as objects from a possible 620. plFiberPlate : 40 possible sky positions to use as objects from a possible 619. plFiberPlate : 9 possible sky positions to use as objects from a possible 618. plFiberPlate : 17 possible sky positions to use as objects from a possible 617. plFiberPlate : 42 possible sky positions to use as objects from a possible 616. plFiberPlate : 39 possible sky positions to use as objects from a possible 615. plFiberPlate : 53 possible sky positions to use as objects from a possible 614. plFiberPlate : 43 possible sky positions to use as objects from a possible 613. plFiberPlate : 13 possible sky positions to use as objects from a possible 612. plFiberPlate : 15 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 15 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 5 possible sky positions to use as objects from a possible 607. plFiberPlate : 25 possible sky positions to use as objects from a possible 606. plFiberPlate : 13 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 7 possible sky positions to use as objects from a possible 603. plFiberPlate : 7 possible sky positions to use as objects from a possible 602. plFiberPlate : 9 possible sky positions to use as objects from a possible 601. plFiberPlate : 5 possible sky positions to use as objects from a possible 600. plFiberPlate : 1 possible sky positions to use as objects from a possible 599. plFiberPlate : 4 possible sky positions to use as objects from a possible 598. plFiberPlate : 61 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 24 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 4 possible sky positions to use as objects from a possible 593. plFiberPlate : 20 possible sky positions to use as objects from a possible 592. plFiberPlate : 78 possible sky positions to use as objects from a possible 591. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2013.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2014.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2014.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2015.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 126 2 11 112 3 6 100 4 7 117 5 6 119 6 5 92 7 5 80 8 4 96 9 6 82 10 18 151 11 14 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 111 36 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 115 55 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 115 59 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 470 34 plFiberPlate : adding spectro-photo std with objId = 4552 40 2 103 56 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 175 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 466 44 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 176 46 plFiberPlate : 127 possible sky positions to use as objects from a possible 595. plFiberPlate : 87 possible sky positions to use as objects from a possible 594. plFiberPlate : 54 possible sky positions to use as objects from a possible 593. plFiberPlate : 34 possible sky positions to use as objects from a possible 592. plFiberPlate : 34 possible sky positions to use as objects from a possible 591. plFiberPlate : 38 possible sky positions to use as objects from a possible 590. plFiberPlate : 55 possible sky positions to use as objects from a possible 589. plFiberPlate : 70 possible sky positions to use as objects from a possible 588. plFiberPlate : 36 possible sky positions to use as objects from a possible 587. plFiberPlate : 20 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 3 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 63 possible sky positions to use as objects from a possible 579. plFiberPlate : 30 possible sky positions to use as objects from a possible 578. plFiberPlate : 17 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 1 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 3 possible sky positions to use as objects from a possible 571. plFiberPlate : 58 possible sky positions to use as objects from a possible 570. plFiberPlate : 36 possible sky positions to use as objects from a possible 569. plFiberPlate : 11 possible sky positions to use as objects from a possible 568. plFiberPlate : 11 possible sky positions to use as objects from a possible 567. plFiberPlate : 9 possible sky positions to use as objects from a possible 566. plFiberPlate : 17 possible sky positions to use as objects from a possible 565. plFiberPlate : 22 possible sky positions to use as objects from a possible 564. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2014.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2015.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2015.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2016.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 116 2 9 87 3 6 103 4 7 127 5 3 125 6 4 97 7 7 91 8 5 119 9 4 100 10 11 146 11 10 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 235 57 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 512 87 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 515 37 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 79 104 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 163 87 plFiberPlate : adding spectro-photo std with objId = 4504 40 1 228 5 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 516 12 plFiberPlate : adding spectro-photo std with objId = 4470 40 1 73 72 plFiberPlate : 124 possible sky positions to use as objects from a possible 623. plFiberPlate : 44 possible sky positions to use as objects from a possible 622. plFiberPlate : 21 possible sky positions to use as objects from a possible 621. plFiberPlate : 27 possible sky positions to use as objects from a possible 620. plFiberPlate : 12 possible sky positions to use as objects from a possible 619. plFiberPlate : 18 possible sky positions to use as objects from a possible 618. plFiberPlate : 36 possible sky positions to use as objects from a possible 617. plFiberPlate : 86 possible sky positions to use as objects from a possible 616. plFiberPlate : 57 possible sky positions to use as objects from a possible 615. plFiberPlate : 32 possible sky positions to use as objects from a possible 614. plFiberPlate : 16 possible sky positions to use as objects from a possible 613. plFiberPlate : 8 possible sky positions to use as objects from a possible 612. plFiberPlate : 26 possible sky positions to use as objects from a possible 611. plFiberPlate : 10 possible sky positions to use as objects from a possible 610. plFiberPlate : 18 possible sky positions to use as objects from a possible 609. plFiberPlate : 18 possible sky positions to use as objects from a possible 608. plFiberPlate : 62 possible sky positions to use as objects from a possible 607. plFiberPlate : 44 possible sky positions to use as objects from a possible 606. plFiberPlate : 31 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 18 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 8 possible sky positions to use as objects from a possible 600. plFiberPlate : 20 possible sky positions to use as objects from a possible 599. plFiberPlate : 62 possible sky positions to use as objects from a possible 598. plFiberPlate : 44 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 42 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2015.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2016.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2016.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2017.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 124 2 13 99 3 4 79 4 5 97 5 9 132 6 7 85 7 8 86 8 12 110 9 7 98 10 12 131 11 10 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 152 5 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 149 52 plFiberPlate : adding spectro-photo std with objId = 4646 40 6 80 33 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 148 29 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 80 61 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 150 2 plFiberPlate : adding spectro-photo std with objId = 4646 40 5 74 12 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 155 12 plFiberPlate : 77 possible sky positions to use as objects from a possible 593. plFiberPlate : 50 possible sky positions to use as objects from a possible 592. plFiberPlate : 45 possible sky positions to use as objects from a possible 591. plFiberPlate : 35 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 49 possible sky positions to use as objects from a possible 587. plFiberPlate : 48 possible sky positions to use as objects from a possible 586. plFiberPlate : 29 possible sky positions to use as objects from a possible 585. plFiberPlate : 24 possible sky positions to use as objects from a possible 584. plFiberPlate : 17 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : 4 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 59 possible sky positions to use as objects from a possible 577. plFiberPlate : 40 possible sky positions to use as objects from a possible 576. plFiberPlate : 33 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 17 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 29 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 7 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 0 possible sky positions to use as objects from a possible 563. plFiberPlate: No sky found for bundle at 101.928 272.586, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2016.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2017.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2017.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2018.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 118 2 6 101 3 7 90 4 2 114 5 7 135 6 7 102 7 4 91 8 8 101 9 9 105 10 8 147 11 4 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 5 69 35 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 79 104 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 421 47 plFiberPlate : adding spectro-photo std with objId = 4382 40 1 41 30 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 231 20 plFiberPlate : adding spectro-photo std with objId = 4382 40 1 51 8 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 227 98 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 67 22 plFiberPlate : 115 possible sky positions to use as objects from a possible 605. plFiberPlate : 78 possible sky positions to use as objects from a possible 604. plFiberPlate : 54 possible sky positions to use as objects from a possible 603. plFiberPlate : 41 possible sky positions to use as objects from a possible 602. plFiberPlate : 34 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : 49 possible sky positions to use as objects from a possible 599. plFiberPlate : 86 possible sky positions to use as objects from a possible 598. plFiberPlate : 37 possible sky positions to use as objects from a possible 597. plFiberPlate : 30 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 14 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 19 possible sky positions to use as objects from a possible 592. plFiberPlate : 19 possible sky positions to use as objects from a possible 591. plFiberPlate : 21 possible sky positions to use as objects from a possible 590. plFiberPlate : 59 possible sky positions to use as objects from a possible 589. plFiberPlate : 20 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 8 possible sky positions to use as objects from a possible 586. plFiberPlate : 6 possible sky positions to use as objects from a possible 585. plFiberPlate : 6 possible sky positions to use as objects from a possible 584. plFiberPlate : 2 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 75 possible sky positions to use as objects from a possible 580. plFiberPlate : 35 possible sky positions to use as objects from a possible 579. plFiberPlate : 29 possible sky positions to use as objects from a possible 578. plFiberPlate : 19 possible sky positions to use as objects from a possible 577. plFiberPlate : 24 possible sky positions to use as objects from a possible 576. plFiberPlate : 9 possible sky positions to use as objects from a possible 575. plFiberPlate : 22 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2017.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2018.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2018.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2019.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 100 2 11 104 3 12 95 4 16 86 5 17 132 6 11 108 7 9 98 8 5 97 9 9 122 10 18 155 11 12 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 307 89 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 126 42 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 312 46 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 313 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 307 2 plFiberPlate : adding spectro-photo std with objId = 4550 40 4 40 15 plFiberPlate : adding spectro-photo std with objId = 4550 40 2 40 106 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 312 28 plFiberPlate : 114 possible sky positions to use as objects from a possible 593. plFiberPlate : 82 possible sky positions to use as objects from a possible 592. plFiberPlate : 80 possible sky positions to use as objects from a possible 591. plFiberPlate : 58 possible sky positions to use as objects from a possible 590. plFiberPlate : 72 possible sky positions to use as objects from a possible 589. plFiberPlate : 37 possible sky positions to use as objects from a possible 588. plFiberPlate : 34 possible sky positions to use as objects from a possible 587. plFiberPlate : 51 possible sky positions to use as objects from a possible 586. plFiberPlate : 38 possible sky positions to use as objects from a possible 585. plFiberPlate : 25 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 11 possible sky positions to use as objects from a possible 581. plFiberPlate : 4 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 58 possible sky positions to use as objects from a possible 577. plFiberPlate : 60 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 8 possible sky positions to use as objects from a possible 571. plFiberPlate : 4 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 80 possible sky positions to use as objects from a possible 568. plFiberPlate : 32 possible sky positions to use as objects from a possible 567. plFiberPlate : 25 possible sky positions to use as objects from a possible 566. plFiberPlate : 24 possible sky positions to use as objects from a possible 565. plFiberPlate : 21 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2018.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2019.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2019.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2020.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 132 2 9 102 3 3 99 4 5 119 5 7 118 6 8 104 7 4 83 8 3 105 9 6 100 10 10 140 11 7 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 472 25 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 470 34 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 475 39 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 478 44 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 131 47 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 198 43 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 472 42 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 466 44 plFiberPlate : 131 possible sky positions to use as objects from a possible 612. plFiberPlate : 54 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 18 possible sky positions to use as objects from a possible 609. plFiberPlate : 33 possible sky positions to use as objects from a possible 608. plFiberPlate : 17 possible sky positions to use as objects from a possible 607. plFiberPlate : 65 possible sky positions to use as objects from a possible 606. plFiberPlate : 67 possible sky positions to use as objects from a possible 605. plFiberPlate : 34 possible sky positions to use as objects from a possible 604. plFiberPlate : 20 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 3 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : 7 possible sky positions to use as objects from a possible 599. plFiberPlate : 9 possible sky positions to use as objects from a possible 598. plFiberPlate : 33 possible sky positions to use as objects from a possible 597. plFiberPlate : 45 possible sky positions to use as objects from a possible 596. plFiberPlate : 30 possible sky positions to use as objects from a possible 595. plFiberPlate : 14 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 8 possible sky positions to use as objects from a possible 592. plFiberPlate : 3 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 60 possible sky positions to use as objects from a possible 587. plFiberPlate : 26 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 14 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2019.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2020.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2020.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2021.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 134 2 6 113 3 7 109 4 8 120 5 5 120 6 4 98 7 6 100 8 4 113 9 3 107 10 11 177 11 9 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 429 40 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 417 60 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 421 40 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 421 47 plFiberPlate : adding spectro-photo std with objId = 4382 40 5 39 102 plFiberPlate : adding spectro-photo std with objId = 4382 40 1 41 30 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 435 32 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 38 64 plFiberPlate : 140 possible sky positions to use as objects from a possible 644. plFiberPlate : 99 possible sky positions to use as objects from a possible 643. plFiberPlate : 48 possible sky positions to use as objects from a possible 642. plFiberPlate : 20 possible sky positions to use as objects from a possible 641. plFiberPlate : 29 possible sky positions to use as objects from a possible 640. plFiberPlate : 47 possible sky positions to use as objects from a possible 639. plFiberPlate : 48 possible sky positions to use as objects from a possible 638. plFiberPlate : 51 possible sky positions to use as objects from a possible 637. plFiberPlate : 38 possible sky positions to use as objects from a possible 636. plFiberPlate : 28 possible sky positions to use as objects from a possible 635. plFiberPlate : 14 possible sky positions to use as objects from a possible 634. plFiberPlate : 5 possible sky positions to use as objects from a possible 633. plFiberPlate : 1 possible sky positions to use as objects from a possible 632. plFiberPlate : 5 possible sky positions to use as objects from a possible 631. plFiberPlate : 21 possible sky positions to use as objects from a possible 630. plFiberPlate : 3 possible sky positions to use as objects from a possible 629. plFiberPlate : 57 possible sky positions to use as objects from a possible 628. plFiberPlate : 41 possible sky positions to use as objects from a possible 627. plFiberPlate : 25 possible sky positions to use as objects from a possible 626. plFiberPlate : 16 possible sky positions to use as objects from a possible 625. plFiberPlate : 9 possible sky positions to use as objects from a possible 624. plFiberPlate : 4 possible sky positions to use as objects from a possible 623. plFiberPlate : 21 possible sky positions to use as objects from a possible 622. plFiberPlate : 11 possible sky positions to use as objects from a possible 621. plFiberPlate : 9 possible sky positions to use as objects from a possible 620. plFiberPlate : 37 possible sky positions to use as objects from a possible 619. plFiberPlate : 32 possible sky positions to use as objects from a possible 618. plFiberPlate : 33 possible sky positions to use as objects from a possible 617. plFiberPlate : 27 possible sky positions to use as objects from a possible 616. plFiberPlate : 10 possible sky positions to use as objects from a possible 615. plFiberPlate : 10 possible sky positions to use as objects from a possible 614. plFiberPlate : 29 possible sky positions to use as objects from a possible 613. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2020.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2021.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2021.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2022.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 120 2 2 102 3 2 91 4 6 110 5 7 118 6 7 98 7 7 85 8 2 109 9 7 103 10 4 140 11 3 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 2 56 52 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 472 53 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 54 52 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 140 31 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 479 92 plFiberPlate : adding spectro-photo std with objId = 4470 40 2 49 26 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 50 23 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 475 6 plFiberPlate : 121 possible sky positions to use as objects from a possible 600. plFiberPlate : 68 possible sky positions to use as objects from a possible 599. plFiberPlate : 47 possible sky positions to use as objects from a possible 598. plFiberPlate : 41 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 26 possible sky positions to use as objects from a possible 595. plFiberPlate : 40 possible sky positions to use as objects from a possible 594. plFiberPlate : 69 possible sky positions to use as objects from a possible 593. plFiberPlate : 39 possible sky positions to use as objects from a possible 592. plFiberPlate : 19 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 4 possible sky positions to use as objects from a possible 589. plFiberPlate : 6 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 26 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 58 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 20 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : 1 possible sky positions to use as objects from a possible 579. plFiberPlate : 6 possible sky positions to use as objects from a possible 578. plFiberPlate : 20 possible sky positions to use as objects from a possible 577. plFiberPlate : 19 possible sky positions to use as objects from a possible 576. plFiberPlate : 62 possible sky positions to use as objects from a possible 575. plFiberPlate : 47 possible sky positions to use as objects from a possible 574. plFiberPlate : 18 possible sky positions to use as objects from a possible 573. plFiberPlate : 10 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 32 possible sky positions to use as objects from a possible 570. plFiberPlate : 25 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2021.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2022.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2022.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2023.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 133 2 6 100 3 3 84 4 3 99 5 12 142 6 14 110 7 8 95 8 5 113 9 9 102 10 7 144 11 8 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 3 101 58 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 254 34 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 523 76 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 521 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 533 8 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 182 29 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 173 76 plFiberPlate : adding spectro-photo std with objId = 4470 40 2 95 123 plFiberPlate : 108 possible sky positions to use as objects from a possible 627. plFiberPlate : 72 possible sky positions to use as objects from a possible 626. plFiberPlate : 59 possible sky positions to use as objects from a possible 625. plFiberPlate : 39 possible sky positions to use as objects from a possible 624. plFiberPlate : 41 possible sky positions to use as objects from a possible 623. plFiberPlate : 25 possible sky positions to use as objects from a possible 622. plFiberPlate : 69 possible sky positions to use as objects from a possible 621. plFiberPlate : 95 possible sky positions to use as objects from a possible 620. plFiberPlate : 61 possible sky positions to use as objects from a possible 619. plFiberPlate : 47 possible sky positions to use as objects from a possible 618. plFiberPlate : 23 possible sky positions to use as objects from a possible 617. plFiberPlate : 12 possible sky positions to use as objects from a possible 616. plFiberPlate : 18 possible sky positions to use as objects from a possible 615. plFiberPlate : 20 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 33 possible sky positions to use as objects from a possible 612. plFiberPlate : 81 possible sky positions to use as objects from a possible 611. plFiberPlate : 42 possible sky positions to use as objects from a possible 610. plFiberPlate : 23 possible sky positions to use as objects from a possible 609. plFiberPlate : 9 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 24 possible sky positions to use as objects from a possible 606. plFiberPlate : 26 possible sky positions to use as objects from a possible 605. plFiberPlate : 16 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 17 possible sky positions to use as objects from a possible 601. plFiberPlate : 21 possible sky positions to use as objects from a possible 600. plFiberPlate : 8 possible sky positions to use as objects from a possible 599. plFiberPlate : 12 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : 20 possible sky positions to use as objects from a possible 596. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2022.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2023.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2023.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2024.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 144 2 12 94 3 7 80 4 9 99 5 5 101 6 6 94 7 8 98 8 7 131 9 10 101 10 19 145 11 15 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 223 30 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 568 8 plFiberPlate : adding spectro-photo std with objId = 4599 40 6 219 84 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 571 8 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 300 63 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 293 60 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 295 54 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 226 18 plFiberPlate : 90 possible sky positions to use as objects from a possible 608. plFiberPlate : 78 possible sky positions to use as objects from a possible 607. plFiberPlate : 51 possible sky positions to use as objects from a possible 606. plFiberPlate : 31 possible sky positions to use as objects from a possible 605. plFiberPlate : 15 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 115 possible sky positions to use as objects from a possible 602. plFiberPlate : 61 possible sky positions to use as objects from a possible 601. plFiberPlate : 62 possible sky positions to use as objects from a possible 600. plFiberPlate : 47 possible sky positions to use as objects from a possible 599. plFiberPlate : 40 possible sky positions to use as objects from a possible 598. plFiberPlate : 24 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 9 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 71 possible sky positions to use as objects from a possible 593. plFiberPlate : 67 possible sky positions to use as objects from a possible 592. plFiberPlate : 47 possible sky positions to use as objects from a possible 591. plFiberPlate : 28 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 4 possible sky positions to use as objects from a possible 587. plFiberPlate : 8 possible sky positions to use as objects from a possible 586. plFiberPlate : 11 possible sky positions to use as objects from a possible 585. plFiberPlate : 42 possible sky positions to use as objects from a possible 584. plFiberPlate : 42 possible sky positions to use as objects from a possible 583. plFiberPlate : 39 possible sky positions to use as objects from a possible 582. plFiberPlate : 34 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 18 possible sky positions to use as objects from a possible 578. plFiberPlate : 28 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2023.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2024.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2024.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2025.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 131 2 10 113 3 11 113 4 11 113 5 10 130 6 7 96 7 7 85 8 5 105 9 8 99 10 13 158 11 9 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4550 40 6 35 14 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 320 58 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 45 50 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 209 38 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 98 18 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 313 4 plFiberPlate : adding spectro-photo std with objId = 4550 40 6 47 6 plFiberPlate : adding spectro-photo std with objId = 4550 40 4 40 15 plFiberPlate : 143 possible sky positions to use as objects from a possible 628. plFiberPlate : 73 possible sky positions to use as objects from a possible 627. plFiberPlate : 48 possible sky positions to use as objects from a possible 626. plFiberPlate : 25 possible sky positions to use as objects from a possible 625. plFiberPlate : 23 possible sky positions to use as objects from a possible 624. plFiberPlate : 43 possible sky positions to use as objects from a possible 623. plFiberPlate : 21 possible sky positions to use as objects from a possible 622. plFiberPlate : 50 possible sky positions to use as objects from a possible 621. plFiberPlate : 39 possible sky positions to use as objects from a possible 620. plFiberPlate : 29 possible sky positions to use as objects from a possible 619. plFiberPlate : 13 possible sky positions to use as objects from a possible 618. plFiberPlate : 12 possible sky positions to use as objects from a possible 617. plFiberPlate : 8 possible sky positions to use as objects from a possible 616. plFiberPlate : 6 possible sky positions to use as objects from a possible 615. plFiberPlate : 19 possible sky positions to use as objects from a possible 614. plFiberPlate : 13 possible sky positions to use as objects from a possible 613. plFiberPlate : 72 possible sky positions to use as objects from a possible 612. plFiberPlate : 43 possible sky positions to use as objects from a possible 611. plFiberPlate : 33 possible sky positions to use as objects from a possible 610. plFiberPlate : 19 possible sky positions to use as objects from a possible 609. plFiberPlate : 17 possible sky positions to use as objects from a possible 608. plFiberPlate : 5 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 47 possible sky positions to use as objects from a possible 603. plFiberPlate : 27 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 16 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 4 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2024.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2025.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2025.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2026.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 119 2 10 106 3 7 94 4 8 96 5 11 127 6 5 101 7 6 96 8 10 100 9 9 99 10 19 146 11 15 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 318 74 plFiberPlate : adding spectro-photo std with objId = 4632 40 6 145 12 plFiberPlate : adding spectro-photo std with objId = 4550 40 2 55 54 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 46 63 plFiberPlate : adding spectro-photo std with objId = 4632 40 6 152 4 plFiberPlate : adding spectro-photo std with objId = 4550 40 3 53 30 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 321 44 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 331 54 plFiberPlate : 110 possible sky positions to use as objects from a possible 599. plFiberPlate : 87 possible sky positions to use as objects from a possible 598. plFiberPlate : 80 possible sky positions to use as objects from a possible 597. plFiberPlate : 38 possible sky positions to use as objects from a possible 596. plFiberPlate : 29 possible sky positions to use as objects from a possible 595. plFiberPlate : 25 possible sky positions to use as objects from a possible 594. plFiberPlate : 64 possible sky positions to use as objects from a possible 593. plFiberPlate : 63 possible sky positions to use as objects from a possible 592. plFiberPlate : 40 possible sky positions to use as objects from a possible 591. plFiberPlate : 23 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : 6 possible sky positions to use as objects from a possible 586. plFiberPlate : 9 possible sky positions to use as objects from a possible 585. plFiberPlate : 25 possible sky positions to use as objects from a possible 584. plFiberPlate : 60 possible sky positions to use as objects from a possible 583. plFiberPlate : 36 possible sky positions to use as objects from a possible 582. plFiberPlate : 27 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 9 possible sky positions to use as objects from a possible 578. plFiberPlate : 8 possible sky positions to use as objects from a possible 577. plFiberPlate : 7 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 48 possible sky positions to use as objects from a possible 574. plFiberPlate : 51 possible sky positions to use as objects from a possible 573. plFiberPlate : 18 possible sky positions to use as objects from a possible 572. plFiberPlate : 21 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 15 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2025.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2026.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2026.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2027.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 110 2 7 99 3 9 91 4 7 119 5 13 141 6 12 116 7 8 99 8 8 102 9 11 107 10 11 145 11 8 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 5 200 73 plFiberPlate : adding spectro-photo std with objId = 4504 40 3 142 46 plFiberPlate : adding spectro-photo std with objId = 4504 40 3 140 42 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 209 42 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 346 47 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 336 31 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 412 40 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 412 10 plFiberPlate : 126 possible sky positions to use as objects from a possible 618. plFiberPlate : 79 possible sky positions to use as objects from a possible 617. plFiberPlate : 42 possible sky positions to use as objects from a possible 616. plFiberPlate : 32 possible sky positions to use as objects from a possible 615. plFiberPlate : 21 possible sky positions to use as objects from a possible 614. plFiberPlate : 21 possible sky positions to use as objects from a possible 613. plFiberPlate : 57 possible sky positions to use as objects from a possible 612. plFiberPlate : 92 possible sky positions to use as objects from a possible 611. plFiberPlate : 60 possible sky positions to use as objects from a possible 610. plFiberPlate : 26 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : 14 possible sky positions to use as objects from a possible 607. plFiberPlate : 11 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 26 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 86 possible sky positions to use as objects from a possible 602. plFiberPlate : 40 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 25 possible sky positions to use as objects from a possible 596. plFiberPlate : 15 possible sky positions to use as objects from a possible 595. plFiberPlate : 15 possible sky positions to use as objects from a possible 594. plFiberPlate : 88 possible sky positions to use as objects from a possible 593. plFiberPlate : 43 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 19 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 18 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2026.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2027.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2027.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2028.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 121 2 10 122 3 5 105 4 11 106 5 8 134 6 8 100 7 4 78 8 6 90 9 6 103 10 18 167 11 16 124 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 2 133 82 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 222 84 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 224 16 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 223 45 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 136 66 plFiberPlate : adding spectro-photo std with objId = 4512 40 1 57 50 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 560 52 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 134 11 plFiberPlate : 142 possible sky positions to use as objects from a possible 605. plFiberPlate : 106 possible sky positions to use as objects from a possible 604. plFiberPlate : 81 possible sky positions to use as objects from a possible 603. plFiberPlate : 43 possible sky positions to use as objects from a possible 602. plFiberPlate : 71 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 27 possible sky positions to use as objects from a possible 599. plFiberPlate : 70 possible sky positions to use as objects from a possible 598. plFiberPlate : 55 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 5 possible sky positions to use as objects from a possible 595. plFiberPlate : 7 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 4 possible sky positions to use as objects from a possible 590. plFiberPlate : 74 possible sky positions to use as objects from a possible 589. plFiberPlate : 53 possible sky positions to use as objects from a possible 588. plFiberPlate : 40 possible sky positions to use as objects from a possible 587. plFiberPlate : 31 possible sky positions to use as objects from a possible 586. plFiberPlate : 9 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 5 possible sky positions to use as objects from a possible 581. plFiberPlate : 46 possible sky positions to use as objects from a possible 580. plFiberPlate : 37 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 6 possible sky positions to use as objects from a possible 575. plFiberPlate : 7 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2027.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2028.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2028.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2029.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 126 2 9 101 3 7 83 4 8 111 5 15 136 6 3 113 7 4 87 8 6 90 9 5 103 10 6 145 11 9 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 238 56 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 163 10 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 166 67 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 91 8 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 88 41 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 159 6 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 163 38 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 241 22 plFiberPlate : 127 possible sky positions to use as objects from a possible 614. plFiberPlate : 55 possible sky positions to use as objects from a possible 613. plFiberPlate : 42 possible sky positions to use as objects from a possible 612. plFiberPlate : 15 possible sky positions to use as objects from a possible 611. plFiberPlate : 21 possible sky positions to use as objects from a possible 610. plFiberPlate : 52 possible sky positions to use as objects from a possible 609. plFiberPlate : 42 possible sky positions to use as objects from a possible 608. plFiberPlate : 81 possible sky positions to use as objects from a possible 607. plFiberPlate : 50 possible sky positions to use as objects from a possible 606. plFiberPlate : 26 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 8 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 19 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 15 possible sky positions to use as objects from a possible 599. plFiberPlate : 46 possible sky positions to use as objects from a possible 598. plFiberPlate : 16 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 4 possible sky positions to use as objects from a possible 595. plFiberPlate : 4 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 5 possible sky positions to use as objects from a possible 590. plFiberPlate : 84 possible sky positions to use as objects from a possible 589. plFiberPlate : 40 possible sky positions to use as objects from a possible 588. plFiberPlate : 29 possible sky positions to use as objects from a possible 587. plFiberPlate : 26 possible sky positions to use as objects from a possible 586. plFiberPlate : 5 possible sky positions to use as objects from a possible 585. plFiberPlate : 9 possible sky positions to use as objects from a possible 584. plFiberPlate : 6 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2028.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2029.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2029.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2030.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 119 2 7 98 3 6 95 4 10 112 5 8 127 6 4 114 7 10 103 8 14 122 9 14 121 10 11 153 11 6 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 291 26 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 146 7 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 73 33 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 149 31 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 143 40 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 354 5 plFiberPlate : adding spectro-photo std with objId = 4392 40 5 137 56 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 82 4 plFiberPlate : 119 possible sky positions to use as objects from a possible 639. plFiberPlate : 85 possible sky positions to use as objects from a possible 638. plFiberPlate : 51 possible sky positions to use as objects from a possible 637. plFiberPlate : 21 possible sky positions to use as objects from a possible 636. plFiberPlate : 23 possible sky positions to use as objects from a possible 635. plFiberPlate : 39 possible sky positions to use as objects from a possible 634. plFiberPlate : 59 possible sky positions to use as objects from a possible 633. plFiberPlate : 76 possible sky positions to use as objects from a possible 632. plFiberPlate : 58 possible sky positions to use as objects from a possible 631. plFiberPlate : 45 possible sky positions to use as objects from a possible 630. plFiberPlate : 20 possible sky positions to use as objects from a possible 629. plFiberPlate : 10 possible sky positions to use as objects from a possible 628. plFiberPlate : 14 possible sky positions to use as objects from a possible 627. plFiberPlate : 15 possible sky positions to use as objects from a possible 626. plFiberPlate : 27 possible sky positions to use as objects from a possible 625. plFiberPlate : 15 possible sky positions to use as objects from a possible 624. plFiberPlate : 67 possible sky positions to use as objects from a possible 623. plFiberPlate : 38 possible sky positions to use as objects from a possible 622. plFiberPlate : 24 possible sky positions to use as objects from a possible 621. plFiberPlate : 15 possible sky positions to use as objects from a possible 620. plFiberPlate : 3 possible sky positions to use as objects from a possible 619. plFiberPlate : 1 possible sky positions to use as objects from a possible 618. plFiberPlate : 22 possible sky positions to use as objects from a possible 617. plFiberPlate : 9 possible sky positions to use as objects from a possible 616. plFiberPlate : 8 possible sky positions to use as objects from a possible 615. plFiberPlate : 60 possible sky positions to use as objects from a possible 614. plFiberPlate : 39 possible sky positions to use as objects from a possible 613. plFiberPlate : 19 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 33 possible sky positions to use as objects from a possible 610. plFiberPlate : 30 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2029.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2030.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2030.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2031.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 138 2 6 101 3 3 93 4 3 107 5 4 136 6 2 95 7 9 88 8 10 108 9 2 99 10 7 154 11 8 126 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 500 6 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 493 61 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 140 31 plFiberPlate : adding spectro-photo std with objId = 4504 40 1 225 16 plFiberPlate : adding spectro-photo std with objId = 4470 40 2 62 55 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 64 2 plFiberPlate : adding spectro-photo std with objId = 4470 40 1 73 72 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 67 22 plFiberPlate : 94 possible sky positions to use as objects from a possible 632. plFiberPlate : 44 possible sky positions to use as objects from a possible 631. plFiberPlate : 24 possible sky positions to use as objects from a possible 630. plFiberPlate : 17 possible sky positions to use as objects from a possible 629. plFiberPlate : 22 possible sky positions to use as objects from a possible 628. plFiberPlate : 43 possible sky positions to use as objects from a possible 627. plFiberPlate : 82 possible sky positions to use as objects from a possible 626. plFiberPlate : 76 possible sky positions to use as objects from a possible 625. plFiberPlate : 44 possible sky positions to use as objects from a possible 624. plFiberPlate : 28 possible sky positions to use as objects from a possible 623. plFiberPlate : 19 possible sky positions to use as objects from a possible 622. plFiberPlate : 9 possible sky positions to use as objects from a possible 621. plFiberPlate : 11 possible sky positions to use as objects from a possible 620. plFiberPlate : 11 possible sky positions to use as objects from a possible 619. plFiberPlate : 25 possible sky positions to use as objects from a possible 618. plFiberPlate : 24 possible sky positions to use as objects from a possible 617. plFiberPlate : 51 possible sky positions to use as objects from a possible 616. plFiberPlate : 21 possible sky positions to use as objects from a possible 615. plFiberPlate : 15 possible sky positions to use as objects from a possible 614. plFiberPlate : 8 possible sky positions to use as objects from a possible 613. plFiberPlate : 8 possible sky positions to use as objects from a possible 612. plFiberPlate : 8 possible sky positions to use as objects from a possible 611. plFiberPlate : 6 possible sky positions to use as objects from a possible 610. plFiberPlate : 25 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 71 possible sky positions to use as objects from a possible 607. plFiberPlate : 39 possible sky positions to use as objects from a possible 606. plFiberPlate : 23 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 15 possible sky positions to use as objects from a possible 602. plFiberPlate : 24 possible sky positions to use as objects from a possible 601. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2030.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2031.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2031.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2032.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 124 2 12 104 3 10 94 4 12 114 5 7 128 6 6 90 7 10 88 8 7 107 9 7 103 10 16 159 11 9 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 245 7 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 56 54 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 239 99 plFiberPlate : adding spectro-photo std with objId = 4470 40 5 82 121 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 252 2 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 69 49 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 93 15 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 237 15 plFiberPlate : 123 possible sky positions to use as objects from a possible 613. plFiberPlate : 60 possible sky positions to use as objects from a possible 612. plFiberPlate : 21 possible sky positions to use as objects from a possible 611. plFiberPlate : 26 possible sky positions to use as objects from a possible 610. plFiberPlate : 34 possible sky positions to use as objects from a possible 609. plFiberPlate : 20 possible sky positions to use as objects from a possible 608. plFiberPlate : 45 possible sky positions to use as objects from a possible 607. plFiberPlate : 51 possible sky positions to use as objects from a possible 606. plFiberPlate : 39 possible sky positions to use as objects from a possible 605. plFiberPlate : 21 possible sky positions to use as objects from a possible 604. plFiberPlate : 22 possible sky positions to use as objects from a possible 603. plFiberPlate : 21 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 21 possible sky positions to use as objects from a possible 600. plFiberPlate : 11 possible sky positions to use as objects from a possible 599. plFiberPlate : 9 possible sky positions to use as objects from a possible 598. plFiberPlate : 83 possible sky positions to use as objects from a possible 597. plFiberPlate : 44 possible sky positions to use as objects from a possible 596. plFiberPlate : 15 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 8 possible sky positions to use as objects from a possible 593. plFiberPlate : 12 possible sky positions to use as objects from a possible 592. plFiberPlate : 12 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 5 possible sky positions to use as objects from a possible 589. plFiberPlate : 63 possible sky positions to use as objects from a possible 588. plFiberPlate : 36 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 12 possible sky positions to use as objects from a possible 585. plFiberPlate : 3 possible sky positions to use as objects from a possible 584. plFiberPlate : 35 possible sky positions to use as objects from a possible 583. plFiberPlate : 23 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2031.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2032.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2032.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2033.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 133 2 6 100 3 9 95 4 6 107 5 8 124 6 3 100 7 4 91 8 7 119 9 5 110 10 9 136 11 3 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 499 48 plFiberPlate : adding spectro-photo std with objId = 4512 40 6 69 60 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 141 31 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 492 43 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 143 36 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 141 40 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 134 11 plFiberPlate : adding spectro-photo std with objId = 4382 40 3 112 87 plFiberPlate : 106 possible sky positions to use as objects from a possible 623. plFiberPlate : 27 possible sky positions to use as objects from a possible 622. plFiberPlate : 10 possible sky positions to use as objects from a possible 621. plFiberPlate : 3 possible sky positions to use as objects from a possible 620. plFiberPlate : 5 possible sky positions to use as objects from a possible 619. plFiberPlate : 8 possible sky positions to use as objects from a possible 618. plFiberPlate : 15 possible sky positions to use as objects from a possible 617. plFiberPlate : 39 possible sky positions to use as objects from a possible 616. plFiberPlate : 33 possible sky positions to use as objects from a possible 615. plFiberPlate : 22 possible sky positions to use as objects from a possible 614. plFiberPlate : 18 possible sky positions to use as objects from a possible 613. plFiberPlate : 12 possible sky positions to use as objects from a possible 612. plFiberPlate : 3 possible sky positions to use as objects from a possible 611. plFiberPlate : 3 possible sky positions to use as objects from a possible 610. plFiberPlate : 6 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : 69 possible sky positions to use as objects from a possible 607. plFiberPlate : 59 possible sky positions to use as objects from a possible 606. plFiberPlate : 39 possible sky positions to use as objects from a possible 605. plFiberPlate : 28 possible sky positions to use as objects from a possible 604. plFiberPlate : 12 possible sky positions to use as objects from a possible 603. plFiberPlate : 12 possible sky positions to use as objects from a possible 602. plFiberPlate : 7 possible sky positions to use as objects from a possible 601. plFiberPlate : 4 possible sky positions to use as objects from a possible 600. plFiberPlate : 17 possible sky positions to use as objects from a possible 599. plFiberPlate : 47 possible sky positions to use as objects from a possible 598. plFiberPlate : 34 possible sky positions to use as objects from a possible 597. plFiberPlate : 14 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : 6 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2032.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2033.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2033.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2034.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 116 2 8 95 3 4 97 4 8 108 5 10 111 6 6 93 7 9 105 8 13 118 9 10 111 10 8 152 11 7 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 3 81 4 plFiberPlate : adding spectro-photo std with objId = 4550 40 3 74 8 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 347 65 plFiberPlate : adding spectro-photo std with objId = 4550 40 5 78 2 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 134 79 plFiberPlate : adding spectro-photo std with objId = 4392 40 1 144 55 plFiberPlate : adding spectro-photo std with objId = 4550 40 4 75 48 plFiberPlate : adding spectro-photo std with objId = 4392 40 1 142 4 plFiberPlate : 124 possible sky positions to use as objects from a possible 610. plFiberPlate : 75 possible sky positions to use as objects from a possible 609. plFiberPlate : 35 possible sky positions to use as objects from a possible 608. plFiberPlate : 28 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 39 possible sky positions to use as objects from a possible 605. plFiberPlate : 36 possible sky positions to use as objects from a possible 604. plFiberPlate : 72 possible sky positions to use as objects from a possible 603. plFiberPlate : 39 possible sky positions to use as objects from a possible 602. plFiberPlate : 32 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 12 possible sky positions to use as objects from a possible 598. plFiberPlate : 11 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 21 possible sky positions to use as objects from a possible 595. plFiberPlate : 48 possible sky positions to use as objects from a possible 594. plFiberPlate : 34 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : 30 possible sky positions to use as objects from a possible 586. plFiberPlate : 40 possible sky positions to use as objects from a possible 585. plFiberPlate : 34 possible sky positions to use as objects from a possible 584. plFiberPlate : 35 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 25 possible sky positions to use as objects from a possible 581. plFiberPlate : 34 possible sky positions to use as objects from a possible 580. plFiberPlate : 27 possible sky positions to use as objects from a possible 579. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2033.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2034.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2034.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2035.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 2 119 2 1 98 3 5 90 4 11 103 5 11 128 6 7 98 7 7 106 8 10 113 9 4 123 10 8 151 11 0 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 11 at 93.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 402 66 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 134 86 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 71 6 plFiberPlate : adding spectro-photo std with objId = 4504 40 1 135 9 plFiberPlate : adding spectro-photo std with objId = 4552 40 6 68 40 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 193 6 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 62 32 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 139 42 plFiberPlate : 121 possible sky positions to use as objects from a possible 627. plFiberPlate : 76 possible sky positions to use as objects from a possible 626. plFiberPlate : 59 possible sky positions to use as objects from a possible 625. plFiberPlate : 29 possible sky positions to use as objects from a possible 624. plFiberPlate : 21 possible sky positions to use as objects from a possible 623. plFiberPlate : 28 possible sky positions to use as objects from a possible 622. plFiberPlate : 62 possible sky positions to use as objects from a possible 621. plFiberPlate : 72 possible sky positions to use as objects from a possible 620. plFiberPlate : 57 possible sky positions to use as objects from a possible 619. plFiberPlate : 40 possible sky positions to use as objects from a possible 618. plFiberPlate : 30 possible sky positions to use as objects from a possible 617. plFiberPlate : 22 possible sky positions to use as objects from a possible 616. plFiberPlate : 25 possible sky positions to use as objects from a possible 615. plFiberPlate : 15 possible sky positions to use as objects from a possible 614. plFiberPlate : 10 possible sky positions to use as objects from a possible 613. plFiberPlate : 19 possible sky positions to use as objects from a possible 612. plFiberPlate : 72 possible sky positions to use as objects from a possible 611. plFiberPlate : 40 possible sky positions to use as objects from a possible 610. plFiberPlate : 27 possible sky positions to use as objects from a possible 609. plFiberPlate : 9 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 4 possible sky positions to use as objects from a possible 606. plFiberPlate : 8 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 16 possible sky positions to use as objects from a possible 603. plFiberPlate : 61 possible sky positions to use as objects from a possible 602. plFiberPlate : 55 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 11 possible sky positions to use as objects from a possible 599. plFiberPlate : 21 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2034.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2035.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2035.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2036.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 116 2 6 102 3 8 79 4 9 110 5 13 125 6 8 105 7 7 111 8 13 128 9 9 126 10 13 146 11 10 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 171 37 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 381 48 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 179 12 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 316 82 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 106 20 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 114 21 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 101 61 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 178 65 plFiberPlate : 119 possible sky positions to use as objects from a possible 633. plFiberPlate : 71 possible sky positions to use as objects from a possible 632. plFiberPlate : 55 possible sky positions to use as objects from a possible 631. plFiberPlate : 34 possible sky positions to use as objects from a possible 630. plFiberPlate : 34 possible sky positions to use as objects from a possible 629. plFiberPlate : 38 possible sky positions to use as objects from a possible 628. plFiberPlate : 64 possible sky positions to use as objects from a possible 627. plFiberPlate : 91 possible sky positions to use as objects from a possible 626. plFiberPlate : 57 possible sky positions to use as objects from a possible 625. plFiberPlate : 34 possible sky positions to use as objects from a possible 624. plFiberPlate : 22 possible sky positions to use as objects from a possible 623. plFiberPlate : 12 possible sky positions to use as objects from a possible 622. plFiberPlate : 7 possible sky positions to use as objects from a possible 621. plFiberPlate : 6 possible sky positions to use as objects from a possible 620. plFiberPlate : 21 possible sky positions to use as objects from a possible 619. plFiberPlate : 27 possible sky positions to use as objects from a possible 618. plFiberPlate : 82 possible sky positions to use as objects from a possible 617. plFiberPlate : 57 possible sky positions to use as objects from a possible 616. plFiberPlate : 44 possible sky positions to use as objects from a possible 615. plFiberPlate : 33 possible sky positions to use as objects from a possible 614. plFiberPlate : 18 possible sky positions to use as objects from a possible 613. plFiberPlate : 13 possible sky positions to use as objects from a possible 612. plFiberPlate : 16 possible sky positions to use as objects from a possible 611. plFiberPlate : 18 possible sky positions to use as objects from a possible 610. plFiberPlate : 42 possible sky positions to use as objects from a possible 609. plFiberPlate : 52 possible sky positions to use as objects from a possible 608. plFiberPlate : 48 possible sky positions to use as objects from a possible 607. plFiberPlate : 40 possible sky positions to use as objects from a possible 606. plFiberPlate : 25 possible sky positions to use as objects from a possible 605. plFiberPlate : 15 possible sky positions to use as objects from a possible 604. plFiberPlate : 21 possible sky positions to use as objects from a possible 603. plFiberPlate : 45 possible sky positions to use as objects from a possible 602. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2035.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2036.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2036.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.4/plPlugMapP-2037.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 121 2 6 87 3 9 84 4 11 104 5 14 127 6 13 98 7 8 86 8 13 110 9 13 105 10 14 148 11 4 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4504 40 3 97 22 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 298 2 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 370 10 plFiberPlate : adding spectro-photo std with objId = 4392 40 5 161 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 301 58 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 155 18 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 101 61 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 158 35 plFiberPlate : 116 possible sky positions to use as objects from a possible 595. plFiberPlate : 60 possible sky positions to use as objects from a possible 594. plFiberPlate : 35 possible sky positions to use as objects from a possible 593. plFiberPlate : 27 possible sky positions to use as objects from a possible 592. plFiberPlate : 19 possible sky positions to use as objects from a possible 591. plFiberPlate : 40 possible sky positions to use as objects from a possible 590. plFiberPlate : 35 possible sky positions to use as objects from a possible 589. plFiberPlate : 93 possible sky positions to use as objects from a possible 588. plFiberPlate : 62 possible sky positions to use as objects from a possible 587. plFiberPlate : 47 possible sky positions to use as objects from a possible 586. plFiberPlate : 25 possible sky positions to use as objects from a possible 585. plFiberPlate : 8 possible sky positions to use as objects from a possible 584. plFiberPlate : 14 possible sky positions to use as objects from a possible 583. plFiberPlate : 26 possible sky positions to use as objects from a possible 582. plFiberPlate : 12 possible sky positions to use as objects from a possible 581. plFiberPlate : 30 possible sky positions to use as objects from a possible 580. plFiberPlate : 77 possible sky positions to use as objects from a possible 579. plFiberPlate : 38 possible sky positions to use as objects from a possible 578. plFiberPlate : 25 possible sky positions to use as objects from a possible 577. plFiberPlate : 15 possible sky positions to use as objects from a possible 576. plFiberPlate : 5 possible sky positions to use as objects from a possible 575. plFiberPlate : 8 possible sky positions to use as objects from a possible 574. plFiberPlate : 6 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 38 possible sky positions to use as objects from a possible 571. plFiberPlate : 81 possible sky positions to use as objects from a possible 570. plFiberPlate : 37 possible sky positions to use as objects from a possible 569. plFiberPlate : 10 possible sky positions to use as objects from a possible 568. plFiberPlate : 13 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 16 possible sky positions to use as objects from a possible 565. plFiberPlate : 20 possible sky positions to use as objects from a possible 564. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2036.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2037.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.4/plOverlay-2037.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Sep 14 20:02:04 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 69 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1969.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.3180,2.9391) and (12.58,2.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1969.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1969.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1970.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.1146,-4.0181) and (-12.30,-3.03) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1970.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1970.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1971.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.9553,11.3266) and (4.22,11.67) plMakeFanucCodes : fixed path between (-10.8683,6.6738) and (-11.26,6.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1971.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1971.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1972.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1972.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1972.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1973.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1973.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1973.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1974.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.0149,10.6793) and (6.00,11.19) plMakeFanucCodes : fixed path between (-11.6666,3.8999) and (-12.52,2.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1974.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1974.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1975.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1975.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1975.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1976.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.7399,-12.2076) and (1.84,-12.58) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1976.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1976.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1977.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1977.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1977.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1978.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.1438,12.2875) and (2.35,12.57) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1978.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1978.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1979.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1979.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1979.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1980.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.8281,-10.6960) and (-5.59,-11.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1980.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1980.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1981.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1981.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1981.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.0821,7.8252) and (-12.07,-3.03) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1982.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.1445,10.2119) and (5.31,11.62) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1982.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.4619,-10.6446) and (0.56,-12.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1982.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1983.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1809,-7.7055) and (-10.69,-7.04) plMakeFanucCodes : fixed path between (6.4481,10.9220) and (4.90,11.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1983.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1983.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1984.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1984.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1984.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1985.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8957,-4.2896) and (12.32,-2.81) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1985.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1985.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1986.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.5097,11.8381) and (-2.15,12.62) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1986.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1986.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1987.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.6221,-9.3862) and (7.30,-10.38) plMakeFanucCodes : fixed path between (5.2522,-11.5139) and (3.85,-12.15) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1987.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1987.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1988.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9764,-3.5590) and (12.60,-2.20) plMakeFanucCodes : fixed path between (6.8195,10.6570) and (4.37,11.82) plMakeFanucCodes : fixed path between (-2.4972,-12.4116) and (-0.78,-12.72) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1988.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1988.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1989.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7616,6.3896) and (11.62,5.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1989.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1989.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1990.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.9147,9.9530) and (6.34,10.84) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1990.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1990.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1991.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1991.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1991.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1992.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4962,-5.6173) and (11.75,-5.07) plMakeFanucCodes : fixed path between (11.7452,-5.0658) and (11.88,-4.54) plMakeFanucCodes : fixed path between (-5.0910,11.4525) and (-3.88,12.12) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1992.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1992.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5908,-6.8639) and (-11.59,3.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1993.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1993.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1993.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1994.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1994.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1994.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1995.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1995.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1995.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1996.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.0039,11.1292) and (4.54,11.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1996.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1996.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1997.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.8742,-11.3694) and (-3.65,-12.00) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1997.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1997.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1998.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.5729,-8.2234) and (11.26,-5.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1998.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1998.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1999.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1999.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-1999.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2000.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.7172,12.1370) and (0.70,12.53) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2000.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2000.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2001.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.1376,11.8564) and (2.86,12.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2001.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2001.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.0970,9.6467) and (-0.79,12.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2002.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.2617,9.7340) and (-7.31,10.49) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2002.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2002.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2003.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.6553,-11.7351) and (-2.19,-12.24) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2003.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2003.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2004.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2004.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2004.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2005.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2005.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2005.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2006.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7411,-4.7505) and (12.48,-2.86) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2006.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.8426,-7.6036) and (3.41,-11.38) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2006.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2007.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.9848,-10.6447) and (-5.28,-11.50) plMakeFanucCodes : fixed path between (-3.1065,-12.4050) and (-0.41,-12.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2007.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2007.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.6007,6.0841) and (-2.98,12.38) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2008.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2008.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2008.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2009.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-2.6636,12.0435) and (-1.41,12.72) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2009.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2009.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2010.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2010.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2010.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2011.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2011.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2011.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2012.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.6675,-11.7741) and (1.30,-12.57) plMakeFanucCodes : fixed path between (-5.1969,11.5198) and (-4.18,12.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2012.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2012.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2013.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3304,-3.3529) and (-12.56,-1.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2013.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2013.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2014.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2014.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2014.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.6993,8.8471) and (11.17,5.40) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2015.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2015.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2015.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2016.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2016.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2016.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2017.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.4525,-10.8708) and (4.42,-11.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2017.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2017.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2018.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.9657,-2.6930) and (-12.75,-1.12) plMakeFanucCodes : fixed path between (3.9216,11.9430) and (2.78,12.44) plMakeFanucCodes : fixed path between (11.8729,4.6884) and (12.10,2.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2018.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2018.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2019.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6791,4.8802) and (-12.23,3.18) plMakeFanucCodes : fixed path between (11.9799,-4.2878) and (12.22,-3.71) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2019.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2019.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2020.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.6512,-11.7213) and (-3.00,-12.42) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2020.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2020.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2021.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2021.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2021.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2022.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.3518,-10.4426) and (6.09,-11.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2022.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2022.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2023.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2113,-6.1623) and (11.39,-5.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2023.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5275,-6.8439) and (-11.48,-4.38) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2023.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2024.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2024.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2024.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2025.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0011,-6.1257) and (11.79,-4.87) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2025.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2025.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2026.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2026.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2026.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2027.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2027.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2027.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2028.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2028.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2028.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2029.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2029.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2029.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2030.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.8700,7.5349) and (11.65,5.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2030.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2030.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2031.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.6310,11.4472) and (-4.73,11.71) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2031.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2031.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2032.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.6785,1.5494) and (12.79,0.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2032.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2032.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2033.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2033.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2033.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2034.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.8473,-11.6516) and (-3.67,-12.18) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2034.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2034.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2035.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2035.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2035.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2036.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.6585,6.5848) and (12.04,4.28) plMakeFanucCodes : fixed path between (12.0432,4.2830) and (12.45,0.88) plMakeFanucCodes : fixed path between (5.9890,-10.9050) and (4.56,-11.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2036.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2036.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2037.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2037.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.4/plFanuc-2037.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Sep 14 20:04:52 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8c45a44 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 69 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1969 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1970 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1971 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1972 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1973 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1974 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1975 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1976 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1977 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1978 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1979 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1980 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1981 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1982 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1983 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1984 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1985 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1986 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1987 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1988 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1989 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1990 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1991 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1992 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1993 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1994 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1995 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1996 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1997 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1998 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1999 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2000 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2001 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2002 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2003 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2004 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2005 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2006 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2007 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2008 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2009 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2010 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2011 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2012 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2013 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2014 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2015 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2016 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2017 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2018 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2019 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2020 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2021 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2022 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2023 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2024 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2025 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2026 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2027 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2028 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2029 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2030 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2031 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2032 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2033 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2034 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2035 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2036 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2037 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Sep 14 20:05:44 CDT 2004 Begin running "plateEnder dr2004.09.4 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.09.4 -morePipes 1" failed. PS: Read file for stderr output of this job.