Sender: LSF System Subject: Job 44087: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue May 17 16:46:13 2005 Results reported at Tue May 17 16:53:24 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.05.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 298.53 sec. Max Memory : 12 MB Max Swap : 36 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Tue May 17 16:46:43 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue May 17 16:47:40 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_232/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Tue May 17 16:47:40 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 CFITSIO_DIR=/sdss/ups/prd/cfitsio/v2_500/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_232/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Tue May 17 16:47:43 CDT 2005 Begin running plate --------------------------------------------------------------- Tue May 17 16:47:44 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_232/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_232/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xaa9c7dc makePlates : beginning loop over plObs chain; makePlates : making 36 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1597.par makePlates : plateInfo struct for plate 2211 : (h4).mjd 53874 (h4).raCen 166.0641 (h4).decCen 28.63454 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.064 28.635 166.064 30.135 plMakePlateFromTile : mjd of obs : 53874.464841 Observed HA/dec of plate center, fiducial point (deg) : -16.002 28.604 -16.003 30.103 The rotation angle of the fid. point is 69.130759 plMakePlateFromTile : beginning loop over 1326 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1617.par makePlates : plateInfo struct for plate 2212 : (h4).mjd 53874 (h4).raCen 166.5665 (h4).decCen 26.23266 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.566 26.233 166.566 27.733 plMakePlateFromTile : mjd of obs : 53874.466230 Observed HA/dec of plate center, fiducial point (deg) : -16.002 26.202 -16.003 27.702 The rotation angle of the fid. point is 60.925057 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1598.par makePlates : plateInfo struct for plate 2213 : (h4).mjd 53874 (h4).raCen 167.9008 (h4).decCen 28.89314 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.901 28.893 167.901 30.393 plMakePlateFromTile : mjd of obs : 53874.467157 Observed HA/dec of plate center, fiducial point (deg) : -17.002 28.862 -17.003 30.362 The rotation angle of the fid. point is 70.716746 plMakePlateFromTile : beginning loop over 1316 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1618.par makePlates : plateInfo struct for plate 2214 : (h4).mjd 53874 (h4).raCen 168.5897 (h4).decCen 26.54898 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.590 26.549 168.590 28.049 plMakePlateFromTile : mjd of obs : 53874.466292 Observed HA/dec of plate center, fiducial point (deg) : -18.002 26.518 -18.003 28.018 The rotation angle of the fid. point is 63.883124 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (48.14, 222.66, 8.1) and (47.75, 222.66, 7.6) checkLTHo : distance = 0.386, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(48.14, 222.66, 8.1) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1599.par makePlates : plateInfo struct for plate 2215 : (h4).mjd 53874 (h4).raCen 169.2577 (h4).decCen 29.32279 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.258 29.323 169.258 30.823 plMakePlateFromTile : mjd of obs : 53874.465373 Observed HA/dec of plate center, fiducial point (deg) : -19.002 29.291 -19.003 30.791 The rotation angle of the fid. point is 73.092163 plMakePlateFromTile : beginning loop over 1334 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1619.par makePlates : plateInfo struct for plate 2216 : (h4).mjd 53874 (h4).raCen 170.6043 (h4).decCen 26.75734 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.604 26.757 170.604 28.257 plMakePlateFromTile : mjd of obs : 53874.466330 Observed HA/dec of plate center, fiducial point (deg) : -20.002 26.726 -20.003 28.226 The rotation angle of the fid. point is 65.971317 plMakePlateFromTile : beginning loop over 1267 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1600.par makePlates : plateInfo struct for plate 2217 : (h4).mjd 53874 (h4).raCen 171.7787 (h4).decCen 29.40533 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.779 29.405 171.779 30.905 plMakePlateFromTile : mjd of obs : 53874.466813 Observed HA/dec of plate center, fiducial point (deg) : -21.002 29.374 -21.003 30.873 The rotation angle of the fid. point is 73.936123 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1620.par makePlates : plateInfo struct for plate 2218 : (h4).mjd 53874 (h4).raCen 172.3787 (h4).decCen 26.92427 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.379 26.924 172.379 28.424 plMakePlateFromTile : mjd of obs : 53874.465703 Observed HA/dec of plate center, fiducial point (deg) : -22.002 26.893 -22.003 28.393 The rotation angle of the fid. point is 67.539760 plMakePlateFromTile : beginning loop over 1269 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1621.par makePlates : plateInfo struct for plate 2219 : (h4).mjd 53874 (h4).raCen 173.7342 (h4).decCen 26.84768 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.734 26.848 173.734 28.348 plMakePlateFromTile : mjd of obs : 53874.466686 Observed HA/dec of plate center, fiducial point (deg) : -23.002 26.816 -23.003 28.316 The rotation angle of the fid. point is 67.809539 plMakePlateFromTile : beginning loop over 1240 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1601.par makePlates : plateInfo struct for plate 2220 : (h4).mjd 53874 (h4).raCen 174.2042 (h4).decCen 29.62176 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.204 29.622 174.204 31.122 plMakePlateFromTile : mjd of obs : 53874.465217 Observed HA/dec of plate center, fiducial point (deg) : -24.002 29.590 -24.003 31.090 The rotation angle of the fid. point is 75.019856 plMakePlateFromTile : beginning loop over 1318 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1622.par makePlates : plateInfo struct for plate 2221 : (h4).mjd 53874 (h4).raCen 176.0715 (h4).decCen 27.1992 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.071 27.199 176.071 28.699 plMakePlateFromTile : mjd of obs : 53874.464846 Observed HA/dec of plate center, fiducial point (deg) : -26.002 27.168 -26.003 28.667 The rotation angle of the fid. point is 69.662675 plMakePlateFromTile : beginning loop over 1298 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1602.par makePlates : plateInfo struct for plate 2222 : (h4).mjd 53874 (h4).raCen 176.5901 (h4).decCen 29.72556 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.590 29.726 176.590 31.226 plMakePlateFromTile : mjd of obs : 53874.466283 Observed HA/dec of plate center, fiducial point (deg) : -26.002 29.693 -26.003 31.193 The rotation angle of the fid. point is 75.405587 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1623.par makePlates : plateInfo struct for plate 2223 : (h4).mjd 53874 (h4).raCen 178.099 (h4).decCen 27.28978 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.099 27.290 178.099 28.790 plMakePlateFromTile : mjd of obs : 53874.464919 Observed HA/dec of plate center, fiducial point (deg) : -28.002 27.258 -28.002 28.758 The rotation angle of the fid. point is 70.307510 plMakePlateFromTile : beginning loop over 1300 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1603.par makePlates : plateInfo struct for plate 2224 : (h4).mjd 53874 (h4).raCen 178.7721 (h4).decCen 29.87317 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.772 29.873 178.772 31.373 plMakePlateFromTile : mjd of obs : 53874.466784 Observed HA/dec of plate center, fiducial point (deg) : -28.002 29.841 -28.002 31.341 The rotation angle of the fid. point is 75.752544 plMakePlateFromTile : beginning loop over 1331 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1604.par makePlates : plateInfo struct for plate 2225 : (h4).mjd 53874 (h4).raCen 180.2028 (h4).decCen 29.82495 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.203 29.825 180.203 31.325 plMakePlateFromTile : mjd of obs : 53874.506770 Observed HA/dec of plate center, fiducial point (deg) : -15.002 29.792 -15.002 31.292 The rotation angle of the fid. point is 73.045135 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1624.par makePlates : plateInfo struct for plate 2226 : (h4).mjd 53874 (h4).raCen 180.3164 (h4).decCen 27.22382 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.316 27.224 180.316 28.724 plMakePlateFromTile : mjd of obs : 53874.507084 Observed HA/dec of plate center, fiducial point (deg) : -15.002 27.191 -15.003 28.691 The rotation angle of the fid. point is 63.089477 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1625.par makePlates : plateInfo struct for plate 2227 : (h4).mjd 53874 (h4).raCen 181.2786 (h4).decCen 27.47864 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.279 27.479 181.279 28.979 plMakePlateFromTile : mjd of obs : 53874.506978 Observed HA/dec of plate center, fiducial point (deg) : -16.002 27.446 -16.002 28.946 The rotation angle of the fid. point is 65.023823 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1605.par makePlates : plateInfo struct for plate 2228 : (h4).mjd 53874 (h4).raCen 182.1504 (h4).decCen 29.96404 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.150 29.964 182.150 31.464 plMakePlateFromTile : mjd of obs : 53874.506621 Observed HA/dec of plate center, fiducial point (deg) : -17.002 29.931 -17.002 31.431 The rotation angle of the fid. point is 74.532176 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1626.par makePlates : plateInfo struct for plate 2229 : (h4).mjd 53874 (h4).raCen 182.8793 (h4).decCen 27.4781 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.879 27.478 182.879 28.978 plMakePlateFromTile : mjd of obs : 53874.508640 Observed HA/dec of plate center, fiducial point (deg) : -17.002 27.446 -17.002 28.945 The rotation angle of the fid. point is 65.914370 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1606.par makePlates : plateInfo struct for plate 2230 : (h4).mjd 53874 (h4).raCen 183.6607 (h4).decCen 29.92216 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.661 29.922 183.661 31.422 plMakePlateFromTile : mjd of obs : 53874.508033 Observed HA/dec of plate center, fiducial point (deg) : -18.002 29.889 -18.002 31.389 The rotation angle of the fid. point is 74.729250 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1627.par makePlates : plateInfo struct for plate 2231 : (h4).mjd 53874 (h4).raCen 184.8218 (h4).decCen 27.54558 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.822 27.546 184.822 29.046 plMakePlateFromTile : mjd of obs : 53874.508478 Observed HA/dec of plate center, fiducial point (deg) : -19.002 27.513 -19.002 29.013 The rotation angle of the fid. point is 67.577209 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (67.87, -106.78, 7.1) and (67.49, -107.00, 7.2) checkLTHo : distance = 0.445, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(67.49, -107.00, 7.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1607.par makePlates : plateInfo struct for plate 2232 : (h4).mjd 53874 (h4).raCen 185.4631 (h4).decCen 30.11512 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 185.463 30.115 185.463 31.615 plMakePlateFromTile : mjd of obs : 53874.507483 Observed HA/dec of plate center, fiducial point (deg) : -20.002 30.082 -20.002 31.582 The rotation angle of the fid. point is 75.851589 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1628.par makePlates : plateInfo struct for plate 2233 : (h4).mjd 53874 (h4).raCen 186.0427 (h4).decCen 27.55139 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.043 27.551 186.043 29.051 plMakePlateFromTile : mjd of obs : 53874.586675 Observed HA/dec of plate center, fiducial point (deg) : 7.998 27.519 7.998 29.018 The rotation angle of the fid. point is -50.777657 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-168.87, -107.62, 7.1) and (-169.26, -107.83, 7.2) checkLTHo : distance = 0.445, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-169.26, -107.83, 7.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1608.par makePlates : plateInfo struct for plate 2234 : (h4).mjd 53874 (h4).raCen 187.7845 (h4).decCen 30.01853 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 187.785 30.019 187.785 31.519 plMakePlateFromTile : mjd of obs : 53874.588728 Observed HA/dec of plate center, fiducial point (deg) : 6.998 29.985 6.998 31.485 The rotation angle of the fid. point is -63.134740 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1629.par makePlates : plateInfo struct for plate 2235 : (h4).mjd 53874 (h4).raCen 188.0622 (h4).decCen 27.40162 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.062 27.402 188.062 28.902 plMakePlateFromTile : mjd of obs : 53874.586726 Observed HA/dec of plate center, fiducial point (deg) : 5.998 27.369 5.998 28.868 The rotation angle of the fid. point is -42.338367 plMakePlateFromTile : beginning loop over 1245 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1630.par makePlates : plateInfo struct for plate 2236 : (h4).mjd 53874 (h4).raCen 189.7665 (h4).decCen 27.46175 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.767 27.462 189.767 28.962 plMakePlateFromTile : mjd of obs : 53874.588675 Observed HA/dec of plate center, fiducial point (deg) : 4.998 27.429 4.998 28.929 The rotation angle of the fid. point is -37.712382 plMakePlateFromTile : beginning loop over 1255 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1609.par makePlates : plateInfo struct for plate 2237 : (h4).mjd 53874 (h4).raCen 190.1297 (h4).decCen 29.93697 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.130 29.937 190.130 31.437 plMakePlateFromTile : mjd of obs : 53874.586910 Observed HA/dec of plate center, fiducial point (deg) : 3.998 29.904 3.998 31.403 The rotation angle of the fid. point is -48.865322 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1631.par makePlates : plateInfo struct for plate 2238 : (h4).mjd 53874 (h4).raCen 191.6812 (h4).decCen 27.30844 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.681 27.308 191.681 28.808 plMakePlateFromTile : mjd of obs : 53874.588436 Observed HA/dec of plate center, fiducial point (deg) : 2.998 27.276 2.998 28.775 The rotation angle of the fid. point is -24.510213 plMakePlateFromTile : beginning loop over 1310 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1610.par makePlates : plateInfo struct for plate 2239 : (h4).mjd 53874 (h4).raCen 192.4453 (h4).decCen 29.82955 (h4).haCen 2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 192.445 29.830 192.445 31.330 plMakePlateFromTile : mjd of obs : 53874.587781 Observed HA/dec of plate center, fiducial point (deg) : 1.998 29.796 1.998 31.296 The rotation angle of the fid. point is -29.267183 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1611.par makePlates : plateInfo struct for plate 2240 : (h4).mjd 53874 (h4).raCen 193.6733 (h4).decCen 27.34071 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.673 27.341 193.673 28.841 plMakePlateFromTile : mjd of obs : 53874.588412 Observed HA/dec of plate center, fiducial point (deg) : 0.998 27.308 0.998 28.808 The rotation angle of the fid. point is -8.726589 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1612.par makePlates : plateInfo struct for plate 2241 : (h4).mjd 53874 (h4).raCen 194.878 (h4).decCen 27.21405 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 194.878 27.214 194.878 28.714 plMakePlateFromTile : mjd of obs : 53874.672107 Observed HA/dec of plate center, fiducial point (deg) : 29.998 27.183 29.998 28.682 The rotation angle of the fid. point is -70.487098 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1613.par makePlates : plateInfo struct for plate 2242 : (h4).mjd 53874 (h4).raCen 196.6921 (h4).decCen 27.04559 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.692 27.046 196.692 28.546 plMakePlateFromTile : mjd of obs : 53874.671589 Observed HA/dec of plate center, fiducial point (deg) : 27.998 27.014 27.998 28.514 The rotation angle of the fid. point is -69.812249 plMakePlateFromTile : beginning loop over 1261 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1614.par makePlates : plateInfo struct for plate 2243 : (h4).mjd 53874 (h4).raCen 198.853 (h4).decCen 26.87464 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.853 26.875 198.853 28.375 plMakePlateFromTile : mjd of obs : 53874.672032 Observed HA/dec of plate center, fiducial point (deg) : 25.998 26.843 25.998 28.343 The rotation angle of the fid. point is -68.955205 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1615.par makePlates : plateInfo struct for plate 2244 : (h4).mjd 53874 (h4).raCen 200.9952 (h4).decCen 26.48682 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.995 26.487 200.995 27.987 plMakePlateFromTile : mjd of obs : 53874.672423 Observed HA/dec of plate center, fiducial point (deg) : 23.998 26.456 23.998 27.956 The rotation angle of the fid. point is -67.379930 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1616.par makePlates : plateInfo struct for plate 2245 : (h4).mjd 53874 (h4).raCen 203.1984 (h4).decCen 26.36135 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.198 26.361 203.198 27.861 plMakePlateFromTile : mjd of obs : 53874.670212 Observed HA/dec of plate center, fiducial point (deg) : 20.998 26.331 20.998 27.830 The rotation angle of the fid. point is -65.542118 plMakePlateFromTile : beginning loop over 1290 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk119/complete//plPlugMapT-1596.par makePlates : plateInfo struct for plate 2246 : (h4).mjd 53874 (h4).raCen 205.3438 (h4).decCen 26.04074 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.344 26.041 205.344 27.541 plMakePlateFromTile : mjd of obs : 53874.670612 Observed HA/dec of plate center, fiducial point (deg) : 18.998 26.010 18.998 27.510 The rotation angle of the fid. point is -63.259718 plMakePlateFromTile : beginning loop over 1291 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue May 17 16:48:42 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_232/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_232/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 36 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2211.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 126 2 8 108 3 6 96 4 4 130 5 5 130 6 6 83 7 9 84 8 11 112 9 11 96 10 14 142 11 9 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 337 32 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 334 63 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 333 67 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 336 20 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 342 39 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 344 30 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 337 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 344 40 plFiberPlate : 130 possible sky positions to use as objects from a possible 624. plFiberPlate : 65 possible sky positions to use as objects from a possible 623. plFiberPlate : 35 possible sky positions to use as objects from a possible 622. plFiberPlate : 19 possible sky positions to use as objects from a possible 621. plFiberPlate : 33 possible sky positions to use as objects from a possible 620. plFiberPlate : 53 possible sky positions to use as objects from a possible 619. plFiberPlate : 73 possible sky positions to use as objects from a possible 618. plFiberPlate : 64 possible sky positions to use as objects from a possible 617. plFiberPlate : 29 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 8 possible sky positions to use as objects from a possible 614. plFiberPlate : 2 possible sky positions to use as objects from a possible 613. plFiberPlate : 14 possible sky positions to use as objects from a possible 612. plFiberPlate : 17 possible sky positions to use as objects from a possible 611. plFiberPlate : 14 possible sky positions to use as objects from a possible 610. plFiberPlate : 2 possible sky positions to use as objects from a possible 609. plFiberPlate : 48 possible sky positions to use as objects from a possible 608. plFiberPlate : 21 possible sky positions to use as objects from a possible 607. plFiberPlate : 13 possible sky positions to use as objects from a possible 606. plFiberPlate : 4 possible sky positions to use as objects from a possible 605. plFiberPlate : 5 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 13 possible sky positions to use as objects from a possible 602. plFiberPlate : 22 possible sky positions to use as objects from a possible 601. plFiberPlate : 4 possible sky positions to use as objects from a possible 600. plFiberPlate : 46 possible sky positions to use as objects from a possible 599. plFiberPlate : 28 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 32 possible sky positions to use as objects from a possible 594. plFiberPlate : 9 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2211.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2211.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2212.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 117 2 3 65 3 9 72 4 10 119 5 4 122 6 5 97 7 8 100 8 8 111 9 3 106 10 8 144 11 6 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 112 2 plFiberPlate : adding spectro-photo std with objId = 5087 40 1 102 50 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 105 39 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 367 46 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 337 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 113 35 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 105 127 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 106 56 plFiberPlate : 120 possible sky positions to use as objects from a possible 595. plFiberPlate : 79 possible sky positions to use as objects from a possible 594. plFiberPlate : 46 possible sky positions to use as objects from a possible 593. plFiberPlate : 36 possible sky positions to use as objects from a possible 592. plFiberPlate : 18 possible sky positions to use as objects from a possible 591. plFiberPlate : 13 possible sky positions to use as objects from a possible 590. plFiberPlate : 35 possible sky positions to use as objects from a possible 589. plFiberPlate : 80 possible sky positions to use as objects from a possible 588. plFiberPlate : 39 possible sky positions to use as objects from a possible 587. plFiberPlate : 23 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 4 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 23 possible sky positions to use as objects from a possible 581. plFiberPlate : 17 possible sky positions to use as objects from a possible 580. plFiberPlate : 67 possible sky positions to use as objects from a possible 579. plFiberPlate : 46 possible sky positions to use as objects from a possible 578. plFiberPlate : 21 possible sky positions to use as objects from a possible 577. plFiberPlate : 9 possible sky positions to use as objects from a possible 576. plFiberPlate : 5 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 13 possible sky positions to use as objects from a possible 573. plFiberPlate : 18 possible sky positions to use as objects from a possible 572. plFiberPlate : 17 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 39 possible sky positions to use as objects from a possible 569. plFiberPlate : 36 possible sky positions to use as objects from a possible 568. plFiberPlate : 10 possible sky positions to use as objects from a possible 567. plFiberPlate : 9 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 23 possible sky positions to use as objects from a possible 564. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2211.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2212.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2212.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2213.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 132 2 8 91 3 5 90 4 8 113 5 12 116 6 8 96 7 6 104 8 10 114 9 6 115 10 7 138 11 7 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 349 94 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 345 52 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 344 30 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 344 40 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 350 9 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 348 51 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 351 25 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 353 71 plFiberPlate : 121 possible sky positions to use as objects from a possible 621. plFiberPlate : 39 possible sky positions to use as objects from a possible 620. plFiberPlate : 11 possible sky positions to use as objects from a possible 619. plFiberPlate : 6 possible sky positions to use as objects from a possible 618. plFiberPlate : 24 possible sky positions to use as objects from a possible 617. plFiberPlate : 31 possible sky positions to use as objects from a possible 616. plFiberPlate : 80 possible sky positions to use as objects from a possible 615. plFiberPlate : 73 possible sky positions to use as objects from a possible 614. plFiberPlate : 38 possible sky positions to use as objects from a possible 613. plFiberPlate : 26 possible sky positions to use as objects from a possible 612. plFiberPlate : 13 possible sky positions to use as objects from a possible 611. plFiberPlate : 6 possible sky positions to use as objects from a possible 610. plFiberPlate : 5 possible sky positions to use as objects from a possible 609. plFiberPlate : 16 possible sky positions to use as objects from a possible 608. plFiberPlate : 20 possible sky positions to use as objects from a possible 607. plFiberPlate : 26 possible sky positions to use as objects from a possible 606. plFiberPlate : 84 possible sky positions to use as objects from a possible 605. plFiberPlate : 56 possible sky positions to use as objects from a possible 604. plFiberPlate : 28 possible sky positions to use as objects from a possible 603. plFiberPlate : 22 possible sky positions to use as objects from a possible 602. plFiberPlate : 20 possible sky positions to use as objects from a possible 601. plFiberPlate : 18 possible sky positions to use as objects from a possible 600. plFiberPlate : 12 possible sky positions to use as objects from a possible 599. plFiberPlate : 2 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 44 possible sky positions to use as objects from a possible 596. plFiberPlate : 37 possible sky positions to use as objects from a possible 595. plFiberPlate : 26 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 18 possible sky positions to use as objects from a possible 592. plFiberPlate : 23 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2212.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2213.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2213.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2214.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 114 2 7 67 3 4 81 4 7 112 5 10 124 6 10 109 7 9 109 8 7 115 9 9 123 10 8 143 11 6 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 114 85 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 388 40 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 126 82 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 385 54 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 380 110 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 113 35 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 353 71 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 389 104 plFiberPlate : 127 possible sky positions to use as objects from a possible 602. plFiberPlate : 80 possible sky positions to use as objects from a possible 601. plFiberPlate : 41 possible sky positions to use as objects from a possible 600. plFiberPlate : 20 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 34 possible sky positions to use as objects from a possible 597. plFiberPlate : 46 possible sky positions to use as objects from a possible 596. plFiberPlate : 74 possible sky positions to use as objects from a possible 595. plFiberPlate : 49 possible sky positions to use as objects from a possible 594. plFiberPlate : 31 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 8 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 7 possible sky positions to use as objects from a possible 588. plFiberPlate : 37 possible sky positions to use as objects from a possible 587. plFiberPlate : 95 possible sky positions to use as objects from a possible 586. plFiberPlate : 80 possible sky positions to use as objects from a possible 585. plFiberPlate : 57 possible sky positions to use as objects from a possible 584. plFiberPlate : 32 possible sky positions to use as objects from a possible 583. plFiberPlate : 21 possible sky positions to use as objects from a possible 582. plFiberPlate : 11 possible sky positions to use as objects from a possible 581. plFiberPlate : 14 possible sky positions to use as objects from a possible 580. plFiberPlate : 26 possible sky positions to use as objects from a possible 579. plFiberPlate : 12 possible sky positions to use as objects from a possible 578. plFiberPlate : 46 possible sky positions to use as objects from a possible 577. plFiberPlate : 33 possible sky positions to use as objects from a possible 576. plFiberPlate : 28 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 25 possible sky positions to use as objects from a possible 573. plFiberPlate : 19 possible sky positions to use as objects from a possible 572. plFiberPlate : 25 possible sky positions to use as objects from a possible 571. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2213.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2214.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2214.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2215.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 110 2 7 105 3 6 106 4 4 117 5 7 130 6 7 110 7 14 82 8 11 109 9 15 111 10 8 163 11 5 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 359 42 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 349 94 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 350 9 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 351 25 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 361 101 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 361 37 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 358 50 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 362 60 plFiberPlate : 132 possible sky positions to use as objects from a possible 625. plFiberPlate : 107 possible sky positions to use as objects from a possible 624. plFiberPlate : 61 possible sky positions to use as objects from a possible 623. plFiberPlate : 41 possible sky positions to use as objects from a possible 622. plFiberPlate : 10 possible sky positions to use as objects from a possible 621. plFiberPlate : 31 possible sky positions to use as objects from a possible 620. plFiberPlate : 46 possible sky positions to use as objects from a possible 619. plFiberPlate : 86 possible sky positions to use as objects from a possible 618. plFiberPlate : 64 possible sky positions to use as objects from a possible 617. plFiberPlate : 39 possible sky positions to use as objects from a possible 616. plFiberPlate : 5 possible sky positions to use as objects from a possible 615. plFiberPlate : 17 possible sky positions to use as objects from a possible 614. plFiberPlate : 9 possible sky positions to use as objects from a possible 613. plFiberPlate : 6 possible sky positions to use as objects from a possible 612. plFiberPlate : 15 possible sky positions to use as objects from a possible 611. plFiberPlate : 26 possible sky positions to use as objects from a possible 610. plFiberPlate : 60 possible sky positions to use as objects from a possible 609. plFiberPlate : 36 possible sky positions to use as objects from a possible 608. plFiberPlate : 21 possible sky positions to use as objects from a possible 607. plFiberPlate : 10 possible sky positions to use as objects from a possible 606. plFiberPlate : 8 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 13 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 23 possible sky positions to use as objects from a possible 601. plFiberPlate : 61 possible sky positions to use as objects from a possible 600. plFiberPlate : 56 possible sky positions to use as objects from a possible 599. plFiberPlate : 47 possible sky positions to use as objects from a possible 598. plFiberPlate : 18 possible sky positions to use as objects from a possible 597. plFiberPlate : 5 possible sky positions to use as objects from a possible 596. plFiberPlate : 14 possible sky positions to use as objects from a possible 595. plFiberPlate : 26 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2214.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2215.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2215.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2216.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 106 2 3 73 3 2 72 4 4 110 5 13 125 6 13 101 7 9 92 8 10 103 9 13 99 10 5 148 11 6 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 388 40 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 124 27 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 401 17 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 126 82 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 399 99 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 397 86 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 389 104 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 402 28 plFiberPlate : 130 possible sky positions to use as objects from a possible 569. plFiberPlate : 67 possible sky positions to use as objects from a possible 568. plFiberPlate : 31 possible sky positions to use as objects from a possible 567. plFiberPlate : 28 possible sky positions to use as objects from a possible 566. plFiberPlate : 18 possible sky positions to use as objects from a possible 565. plFiberPlate : 33 possible sky positions to use as objects from a possible 564. plFiberPlate : 39 possible sky positions to use as objects from a possible 563. plFiberPlate : 78 possible sky positions to use as objects from a possible 562. plFiberPlate : 46 possible sky positions to use as objects from a possible 561. plFiberPlate : 36 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : 20 possible sky positions to use as objects from a possible 557. plFiberPlate : 4 possible sky positions to use as objects from a possible 556. plFiberPlate : 15 possible sky positions to use as objects from a possible 555. plFiberPlate : 14 possible sky positions to use as objects from a possible 554. plFiberPlate : 77 possible sky positions to use as objects from a possible 553. plFiberPlate : 41 possible sky positions to use as objects from a possible 552. plFiberPlate : 18 possible sky positions to use as objects from a possible 551. plFiberPlate : 18 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 15 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 13 possible sky positions to use as objects from a possible 545. plFiberPlate : 40 possible sky positions to use as objects from a possible 544. plFiberPlate : 36 possible sky positions to use as objects from a possible 543. plFiberPlate : 12 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : 12 possible sky positions to use as objects from a possible 540. plFiberPlate : 6 possible sky positions to use as objects from a possible 539. plFiberPlate : 23 possible sky positions to use as objects from a possible 538. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2215.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2216.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2216.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2217.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 116 2 8 83 3 7 95 4 11 115 5 2 130 6 4 101 7 7 95 8 9 123 9 4 121 10 12 149 11 6 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 372 41 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 379 19 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 365 38 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 369 2 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 371 59 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 374 61 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 377 80 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 362 60 plFiberPlate : 119 possible sky positions to use as objects from a possible 620. plFiberPlate : 72 possible sky positions to use as objects from a possible 619. plFiberPlate : 47 possible sky positions to use as objects from a possible 618. plFiberPlate : 32 possible sky positions to use as objects from a possible 617. plFiberPlate : 31 possible sky positions to use as objects from a possible 616. plFiberPlate : 27 possible sky positions to use as objects from a possible 615. plFiberPlate : 36 possible sky positions to use as objects from a possible 614. plFiberPlate : 102 possible sky positions to use as objects from a possible 613. plFiberPlate : 66 possible sky positions to use as objects from a possible 612. plFiberPlate : 39 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 10 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : 15 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 21 possible sky positions to use as objects from a possible 605. plFiberPlate : 81 possible sky positions to use as objects from a possible 604. plFiberPlate : 62 possible sky positions to use as objects from a possible 603. plFiberPlate : 34 possible sky positions to use as objects from a possible 602. plFiberPlate : 28 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 26 possible sky positions to use as objects from a possible 598. plFiberPlate : 27 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 49 possible sky positions to use as objects from a possible 595. plFiberPlate : 43 possible sky positions to use as objects from a possible 594. plFiberPlate : 36 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : 16 possible sky positions to use as objects from a possible 591. plFiberPlate : 18 possible sky positions to use as objects from a possible 590. plFiberPlate : 23 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2216.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2217.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2217.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2218.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 121 2 3 70 3 5 64 4 6 102 5 8 116 6 9 90 7 8 96 8 12 115 9 10 113 10 11 135 11 7 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 135 33 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 413 15 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 400 40 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 397 55 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 401 17 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 371 59 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 399 99 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 402 28 plFiberPlate : 105 possible sky positions to use as objects from a possible 573. plFiberPlate : 43 possible sky positions to use as objects from a possible 572. plFiberPlate : 21 possible sky positions to use as objects from a possible 571. plFiberPlate : 13 possible sky positions to use as objects from a possible 570. plFiberPlate : 35 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 59 possible sky positions to use as objects from a possible 567. plFiberPlate : 75 possible sky positions to use as objects from a possible 566. plFiberPlate : 52 possible sky positions to use as objects from a possible 565. plFiberPlate : 36 possible sky positions to use as objects from a possible 564. plFiberPlate : 21 possible sky positions to use as objects from a possible 563. plFiberPlate : 17 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 23 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : 77 possible sky positions to use as objects from a possible 557. plFiberPlate : 66 possible sky positions to use as objects from a possible 556. plFiberPlate : 40 possible sky positions to use as objects from a possible 555. plFiberPlate : 25 possible sky positions to use as objects from a possible 554. plFiberPlate : 9 possible sky positions to use as objects from a possible 553. plFiberPlate : 8 possible sky positions to use as objects from a possible 552. plFiberPlate : 12 possible sky positions to use as objects from a possible 551. plFiberPlate : 21 possible sky positions to use as objects from a possible 550. plFiberPlate : 20 possible sky positions to use as objects from a possible 549. plFiberPlate : 56 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 20 possible sky positions to use as objects from a possible 546. plFiberPlate : 15 possible sky positions to use as objects from a possible 545. plFiberPlate : 17 possible sky positions to use as objects from a possible 544. plFiberPlate : 23 possible sky positions to use as objects from a possible 543. plFiberPlate : 21 possible sky positions to use as objects from a possible 542. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2217.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2218.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2218.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2219.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 101 2 5 57 3 4 54 4 10 96 5 15 133 6 7 107 7 11 86 8 13 100 9 8 108 10 12 127 11 11 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 408 38 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 413 15 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 158 23 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 418 36 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 419 53 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 419 13 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 156 27 plFiberPlate : adding spectro-photo std with objId = 5087 40 1 152 47 plFiberPlate : 112 possible sky positions to use as objects from a possible 539. plFiberPlate : 72 possible sky positions to use as objects from a possible 538. plFiberPlate : 51 possible sky positions to use as objects from a possible 537. plFiberPlate : 30 possible sky positions to use as objects from a possible 536. plFiberPlate : 24 possible sky positions to use as objects from a possible 535. plFiberPlate : 24 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 67 possible sky positions to use as objects from a possible 532. plFiberPlate : 55 possible sky positions to use as objects from a possible 531. plFiberPlate : 40 possible sky positions to use as objects from a possible 530. plFiberPlate : 22 possible sky positions to use as objects from a possible 529. plFiberPlate : 19 possible sky positions to use as objects from a possible 528. plFiberPlate : 2 possible sky positions to use as objects from a possible 527. plFiberPlate : 1 possible sky positions to use as objects from a possible 526. plFiberPlate : 18 possible sky positions to use as objects from a possible 525. plFiberPlate : 17 possible sky positions to use as objects from a possible 524. plFiberPlate : 67 possible sky positions to use as objects from a possible 523. plFiberPlate : 41 possible sky positions to use as objects from a possible 522. plFiberPlate : 36 possible sky positions to use as objects from a possible 521. plFiberPlate : 15 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 4 possible sky positions to use as objects from a possible 518. plFiberPlate : 10 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 18 possible sky positions to use as objects from a possible 515. plFiberPlate : 76 possible sky positions to use as objects from a possible 514. plFiberPlate : 34 possible sky positions to use as objects from a possible 513. plFiberPlate : 23 possible sky positions to use as objects from a possible 512. plFiberPlate : 16 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : 11 possible sky positions to use as objects from a possible 509. plFiberPlate : 20 possible sky positions to use as objects from a possible 508. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2218.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2219.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2219.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2220.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 119 2 7 98 3 11 83 4 11 108 5 13 126 6 9 95 7 6 99 8 10 105 9 13 107 10 13 147 11 6 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 395 12 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 380 107 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 389 23 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 380 50 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 387 30 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 387 2 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 389 17 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 422 28 plFiberPlate : 124 possible sky positions to use as objects from a possible 617. plFiberPlate : 60 possible sky positions to use as objects from a possible 616. plFiberPlate : 41 possible sky positions to use as objects from a possible 615. plFiberPlate : 41 possible sky positions to use as objects from a possible 614. plFiberPlate : 26 possible sky positions to use as objects from a possible 613. plFiberPlate : 29 possible sky positions to use as objects from a possible 612. plFiberPlate : 21 possible sky positions to use as objects from a possible 611. plFiberPlate : 85 possible sky positions to use as objects from a possible 610. plFiberPlate : 53 possible sky positions to use as objects from a possible 609. plFiberPlate : 34 possible sky positions to use as objects from a possible 608. plFiberPlate : 22 possible sky positions to use as objects from a possible 607. plFiberPlate : 21 possible sky positions to use as objects from a possible 606. plFiberPlate : 3 possible sky positions to use as objects from a possible 605. plFiberPlate : 17 possible sky positions to use as objects from a possible 604. plFiberPlate : 21 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 73 possible sky positions to use as objects from a possible 601. plFiberPlate : 45 possible sky positions to use as objects from a possible 600. plFiberPlate : 28 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 10 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 20 possible sky positions to use as objects from a possible 595. plFiberPlate : 21 possible sky positions to use as objects from a possible 594. plFiberPlate : 19 possible sky positions to use as objects from a possible 593. plFiberPlate : 46 possible sky positions to use as objects from a possible 592. plFiberPlate : 39 possible sky positions to use as objects from a possible 591. plFiberPlate : 16 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 11 possible sky positions to use as objects from a possible 587. plFiberPlate : 20 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2219.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2220.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2220.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2221.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 126 2 8 77 3 11 72 4 14 115 5 13 100 6 7 84 7 7 102 8 8 131 9 9 106 10 16 141 11 8 121 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 168 8 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 425 16 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 163 11 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 158 23 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 432 10 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 161 45 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 160 21 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 156 27 plFiberPlate : 126 possible sky positions to use as objects from a possible 583. plFiberPlate : 72 possible sky positions to use as objects from a possible 582. plFiberPlate : 40 possible sky positions to use as objects from a possible 581. plFiberPlate : 27 possible sky positions to use as objects from a possible 580. plFiberPlate : 48 possible sky positions to use as objects from a possible 579. plFiberPlate : 36 possible sky positions to use as objects from a possible 578. plFiberPlate : 50 possible sky positions to use as objects from a possible 577. plFiberPlate : 78 possible sky positions to use as objects from a possible 576. plFiberPlate : 52 possible sky positions to use as objects from a possible 575. plFiberPlate : 28 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 9 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 41 possible sky positions to use as objects from a possible 569. plFiberPlate : 22 possible sky positions to use as objects from a possible 568. plFiberPlate : 66 possible sky positions to use as objects from a possible 567. plFiberPlate : 42 possible sky positions to use as objects from a possible 566. plFiberPlate : 27 possible sky positions to use as objects from a possible 565. plFiberPlate : 19 possible sky positions to use as objects from a possible 564. plFiberPlate : 11 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : 33 possible sky positions to use as objects from a possible 561. plFiberPlate : 29 possible sky positions to use as objects from a possible 560. plFiberPlate : 11 possible sky positions to use as objects from a possible 559. plFiberPlate : 30 possible sky positions to use as objects from a possible 558. plFiberPlate : 35 possible sky positions to use as objects from a possible 557. plFiberPlate : 24 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 15 possible sky positions to use as objects from a possible 554. plFiberPlate : 18 possible sky positions to use as objects from a possible 553. plFiberPlate : 40 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2220.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2221.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2221.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2222.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 118 2 6 91 3 6 90 4 9 121 5 6 122 6 4 94 7 10 87 8 11 112 9 3 110 10 13 132 11 7 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 402 12 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 433 37 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 398 2 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 403 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 432 10 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 407 43 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 408 57 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 401 8 plFiberPlate : 125 possible sky positions to use as objects from a possible 600. plFiberPlate : 62 possible sky positions to use as objects from a possible 599. plFiberPlate : 40 possible sky positions to use as objects from a possible 598. plFiberPlate : 39 possible sky positions to use as objects from a possible 597. plFiberPlate : 22 possible sky positions to use as objects from a possible 596. plFiberPlate : 16 possible sky positions to use as objects from a possible 595. plFiberPlate : 43 possible sky positions to use as objects from a possible 594. plFiberPlate : 83 possible sky positions to use as objects from a possible 593. plFiberPlate : 34 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 8 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : 9 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 30 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 85 possible sky positions to use as objects from a possible 584. plFiberPlate : 74 possible sky positions to use as objects from a possible 583. plFiberPlate : 42 possible sky positions to use as objects from a possible 582. plFiberPlate : 34 possible sky positions to use as objects from a possible 581. plFiberPlate : 17 possible sky positions to use as objects from a possible 580. plFiberPlate : 7 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : 31 possible sky positions to use as objects from a possible 577. plFiberPlate : 23 possible sky positions to use as objects from a possible 576. plFiberPlate : 37 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 11 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2221.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2222.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2222.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2223.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 124 2 5 64 3 3 78 4 5 120 5 7 137 6 11 96 7 11 87 8 8 115 9 2 93 10 11 141 11 10 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 446 2 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 168 8 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 184 52 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 179 13 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 180 2 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 440 59 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 447 67 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 177 60 plFiberPlate : 129 possible sky positions to use as objects from a possible 595. plFiberPlate : 74 possible sky positions to use as objects from a possible 594. plFiberPlate : 35 possible sky positions to use as objects from a possible 593. plFiberPlate : 30 possible sky positions to use as objects from a possible 592. plFiberPlate : 27 possible sky positions to use as objects from a possible 591. plFiberPlate : 24 possible sky positions to use as objects from a possible 590. plFiberPlate : 34 possible sky positions to use as objects from a possible 589. plFiberPlate : 93 possible sky positions to use as objects from a possible 588. plFiberPlate : 56 possible sky positions to use as objects from a possible 587. plFiberPlate : 30 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 8 possible sky positions to use as objects from a possible 584. plFiberPlate : 12 possible sky positions to use as objects from a possible 583. plFiberPlate : 24 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 75 possible sky positions to use as objects from a possible 579. plFiberPlate : 36 possible sky positions to use as objects from a possible 578. plFiberPlate : 18 possible sky positions to use as objects from a possible 577. plFiberPlate : 14 possible sky positions to use as objects from a possible 576. plFiberPlate : 6 possible sky positions to use as objects from a possible 575. plFiberPlate : 6 possible sky positions to use as objects from a possible 574. plFiberPlate : 1 possible sky positions to use as objects from a possible 573. plFiberPlate : 30 possible sky positions to use as objects from a possible 572. plFiberPlate : 29 possible sky positions to use as objects from a possible 571. plFiberPlate : 42 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 8 possible sky positions to use as objects from a possible 568. plFiberPlate : 4 possible sky positions to use as objects from a possible 567. plFiberPlate : 13 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2222.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2223.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2223.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2224.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 10 106 3 5 89 4 7 102 5 11 136 6 8 108 7 8 93 8 8 94 9 14 111 10 24 167 11 16 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 416 90 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 416 97 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 412 31 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 415 34 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 403 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 407 43 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 418 39 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 408 57 plFiberPlate : 118 possible sky positions to use as objects from a possible 624. plFiberPlate : 78 possible sky positions to use as objects from a possible 623. plFiberPlate : 53 possible sky positions to use as objects from a possible 622. plFiberPlate : 33 possible sky positions to use as objects from a possible 621. plFiberPlate : 38 possible sky positions to use as objects from a possible 620. plFiberPlate : 41 possible sky positions to use as objects from a possible 619. plFiberPlate : 52 possible sky positions to use as objects from a possible 618. plFiberPlate : 80 possible sky positions to use as objects from a possible 617. plFiberPlate : 66 possible sky positions to use as objects from a possible 616. plFiberPlate : 53 possible sky positions to use as objects from a possible 615. plFiberPlate : 24 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 24 possible sky positions to use as objects from a possible 612. plFiberPlate : 19 possible sky positions to use as objects from a possible 611. plFiberPlate : 10 possible sky positions to use as objects from a possible 610. plFiberPlate : 8 possible sky positions to use as objects from a possible 609. plFiberPlate : 96 possible sky positions to use as objects from a possible 608. plFiberPlate : 68 possible sky positions to use as objects from a possible 607. plFiberPlate : 27 possible sky positions to use as objects from a possible 606. plFiberPlate : 20 possible sky positions to use as objects from a possible 605. plFiberPlate : 16 possible sky positions to use as objects from a possible 604. plFiberPlate : 9 possible sky positions to use as objects from a possible 603. plFiberPlate : 7 possible sky positions to use as objects from a possible 602. plFiberPlate : 17 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 42 possible sky positions to use as objects from a possible 599. plFiberPlate : 25 possible sky positions to use as objects from a possible 598. plFiberPlate : 11 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 4 possible sky positions to use as objects from a possible 594. plFiberPlate : 8 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2223.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2224.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2224.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2225.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 129 2 8 99 3 6 97 4 17 134 5 13 124 6 9 106 7 8 89 8 6 102 9 6 105 10 13 165 11 11 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 412 50 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 416 90 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 416 97 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 419 36 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 420 86 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 415 34 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 418 39 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 428 63 plFiberPlate : 142 possible sky positions to use as objects from a possible 632. plFiberPlate : 89 possible sky positions to use as objects from a possible 631. plFiberPlate : 33 possible sky positions to use as objects from a possible 630. plFiberPlate : 17 possible sky positions to use as objects from a possible 629. plFiberPlate : 22 possible sky positions to use as objects from a possible 628. plFiberPlate : 24 possible sky positions to use as objects from a possible 627. plFiberPlate : 71 possible sky positions to use as objects from a possible 626. plFiberPlate : 75 possible sky positions to use as objects from a possible 625. plFiberPlate : 70 possible sky positions to use as objects from a possible 624. plFiberPlate : 31 possible sky positions to use as objects from a possible 623. plFiberPlate : 11 possible sky positions to use as objects from a possible 622. plFiberPlate : 11 possible sky positions to use as objects from a possible 621. plFiberPlate : 6 possible sky positions to use as objects from a possible 620. plFiberPlate : 15 possible sky positions to use as objects from a possible 619. plFiberPlate : 32 possible sky positions to use as objects from a possible 618. plFiberPlate : 20 possible sky positions to use as objects from a possible 617. plFiberPlate : 83 possible sky positions to use as objects from a possible 616. plFiberPlate : 44 possible sky positions to use as objects from a possible 615. plFiberPlate : 29 possible sky positions to use as objects from a possible 614. plFiberPlate : 21 possible sky positions to use as objects from a possible 613. plFiberPlate : 22 possible sky positions to use as objects from a possible 612. plFiberPlate : 11 possible sky positions to use as objects from a possible 611. plFiberPlate : 7 possible sky positions to use as objects from a possible 610. plFiberPlate : 19 possible sky positions to use as objects from a possible 609. plFiberPlate : 17 possible sky positions to use as objects from a possible 608. plFiberPlate : 53 possible sky positions to use as objects from a possible 607. plFiberPlate : 31 possible sky positions to use as objects from a possible 606. plFiberPlate : 21 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 8 possible sky positions to use as objects from a possible 603. plFiberPlate : 19 possible sky positions to use as objects from a possible 602. plFiberPlate : 14 possible sky positions to use as objects from a possible 601. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2224.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2225.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2225.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2226.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 121 2 3 63 3 4 42 4 8 84 5 8 124 6 5 102 7 5 88 8 7 99 9 5 117 10 14 130 11 8 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 191 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 455 49 plFiberPlate : adding spectro-photo std with objId = 5087 40 1 186 85 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 457 15 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 452 37 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 453 34 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 447 54 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 447 67 plFiberPlate : 99 possible sky positions to use as objects from a possible 540. plFiberPlate : 76 possible sky positions to use as objects from a possible 539. plFiberPlate : 54 possible sky positions to use as objects from a possible 538. plFiberPlate : 46 possible sky positions to use as objects from a possible 537. plFiberPlate : 34 possible sky positions to use as objects from a possible 536. plFiberPlate : 54 possible sky positions to use as objects from a possible 535. plFiberPlate : 68 possible sky positions to use as objects from a possible 534. plFiberPlate : 75 possible sky positions to use as objects from a possible 533. plFiberPlate : 61 possible sky positions to use as objects from a possible 532. plFiberPlate : 53 possible sky positions to use as objects from a possible 531. plFiberPlate : 39 possible sky positions to use as objects from a possible 530. plFiberPlate : 29 possible sky positions to use as objects from a possible 529. plFiberPlate : 22 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : 43 possible sky positions to use as objects from a possible 526. plFiberPlate : 12 possible sky positions to use as objects from a possible 525. plFiberPlate : 63 possible sky positions to use as objects from a possible 524. plFiberPlate : 58 possible sky positions to use as objects from a possible 523. plFiberPlate : 37 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 13 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 18 possible sky positions to use as objects from a possible 516. plFiberPlate : 39 possible sky positions to use as objects from a possible 515. plFiberPlate : 31 possible sky positions to use as objects from a possible 514. plFiberPlate : 34 possible sky positions to use as objects from a possible 513. plFiberPlate : 18 possible sky positions to use as objects from a possible 512. plFiberPlate : 4 possible sky positions to use as objects from a possible 511. plFiberPlate : 1 possible sky positions to use as objects from a possible 510. plFiberPlate : 9 possible sky positions to use as objects from a possible 509. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2225.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2226.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2226.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2227.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 120 2 3 79 3 5 91 4 9 118 5 4 127 6 9 96 7 8 95 8 11 109 9 8 96 10 10 166 11 6 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 460 15 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 189 32 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 457 15 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 465 50 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 453 34 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 452 37 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 201 30 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 464 34 plFiberPlate : 123 possible sky positions to use as objects from a possible 598. plFiberPlate : 94 possible sky positions to use as objects from a possible 597. plFiberPlate : 34 possible sky positions to use as objects from a possible 596. plFiberPlate : 49 possible sky positions to use as objects from a possible 595. plFiberPlate : 37 possible sky positions to use as objects from a possible 594. plFiberPlate : 19 possible sky positions to use as objects from a possible 593. plFiberPlate : 31 possible sky positions to use as objects from a possible 592. plFiberPlate : 92 possible sky positions to use as objects from a possible 591. plFiberPlate : 66 possible sky positions to use as objects from a possible 590. plFiberPlate : 43 possible sky positions to use as objects from a possible 589. plFiberPlate : 18 possible sky positions to use as objects from a possible 588. plFiberPlate : 29 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 50 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 20 possible sky positions to use as objects from a possible 580. plFiberPlate : 8 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 7 possible sky positions to use as objects from a possible 576. plFiberPlate : 9 possible sky positions to use as objects from a possible 575. plFiberPlate : 18 possible sky positions to use as objects from a possible 574. plFiberPlate : 53 possible sky positions to use as objects from a possible 573. plFiberPlate : 29 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : 5 possible sky positions to use as objects from a possible 570. plFiberPlate : 6 possible sky positions to use as objects from a possible 569. plFiberPlate : 11 possible sky positions to use as objects from a possible 568. plFiberPlate : 22 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2226.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2227.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2227.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2228.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 117 2 6 100 3 5 106 4 9 119 5 8 128 6 3 109 7 4 97 8 12 103 9 7 107 10 11 168 11 9 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 426 68 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 439 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 433 68 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 429 12 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 435 2 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 435 29 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 464 34 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 428 63 plFiberPlate : 117 possible sky positions to use as objects from a possible 623. plFiberPlate : 81 possible sky positions to use as objects from a possible 622. plFiberPlate : 32 possible sky positions to use as objects from a possible 621. plFiberPlate : 14 possible sky positions to use as objects from a possible 620. plFiberPlate : 51 possible sky positions to use as objects from a possible 619. plFiberPlate : 31 possible sky positions to use as objects from a possible 618. plFiberPlate : 26 possible sky positions to use as objects from a possible 617. plFiberPlate : 94 possible sky positions to use as objects from a possible 616. plFiberPlate : 83 possible sky positions to use as objects from a possible 615. plFiberPlate : 62 possible sky positions to use as objects from a possible 614. plFiberPlate : 26 possible sky positions to use as objects from a possible 613. plFiberPlate : 24 possible sky positions to use as objects from a possible 612. plFiberPlate : 17 possible sky positions to use as objects from a possible 611. plFiberPlate : 22 possible sky positions to use as objects from a possible 610. plFiberPlate : 12 possible sky positions to use as objects from a possible 609. plFiberPlate : 23 possible sky positions to use as objects from a possible 608. plFiberPlate : 68 possible sky positions to use as objects from a possible 607. plFiberPlate : 53 possible sky positions to use as objects from a possible 606. plFiberPlate : 17 possible sky positions to use as objects from a possible 605. plFiberPlate : 15 possible sky positions to use as objects from a possible 604. plFiberPlate : 8 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 7 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 9 possible sky positions to use as objects from a possible 599. plFiberPlate : 40 possible sky positions to use as objects from a possible 598. plFiberPlate : 22 possible sky positions to use as objects from a possible 597. plFiberPlate : 12 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 6 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2227.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2228.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2228.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2229.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 124 2 5 75 3 7 85 4 8 118 5 11 123 6 5 97 7 7 86 8 11 99 9 6 103 10 13 152 11 9 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 470 107 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 83 41 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 469 56 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 84 2 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 209 40 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 465 50 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 208 16 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 207 12 plFiberPlate : 130 possible sky positions to use as objects from a possible 587. plFiberPlate : 57 possible sky positions to use as objects from a possible 586. plFiberPlate : 31 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 31 possible sky positions to use as objects from a possible 583. plFiberPlate : 29 possible sky positions to use as objects from a possible 582. plFiberPlate : 48 possible sky positions to use as objects from a possible 581. plFiberPlate : 85 possible sky positions to use as objects from a possible 580. plFiberPlate : 49 possible sky positions to use as objects from a possible 579. plFiberPlate : 28 possible sky positions to use as objects from a possible 578. plFiberPlate : 10 possible sky positions to use as objects from a possible 577. plFiberPlate : 5 possible sky positions to use as objects from a possible 576. plFiberPlate : 3 possible sky positions to use as objects from a possible 575. plFiberPlate : 22 possible sky positions to use as objects from a possible 574. plFiberPlate : 16 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 94 possible sky positions to use as objects from a possible 571. plFiberPlate : 56 possible sky positions to use as objects from a possible 570. plFiberPlate : 37 possible sky positions to use as objects from a possible 569. plFiberPlate : 20 possible sky positions to use as objects from a possible 568. plFiberPlate : 10 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 20 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 8 possible sky positions to use as objects from a possible 563. plFiberPlate : 19 possible sky positions to use as objects from a possible 562. plFiberPlate : 31 possible sky positions to use as objects from a possible 561. plFiberPlate : 17 possible sky positions to use as objects from a possible 560. plFiberPlate : 6 possible sky positions to use as objects from a possible 559. plFiberPlate : 20 possible sky positions to use as objects from a possible 558. plFiberPlate : 9 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2228.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2229.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2229.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2230.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 123 2 11 90 3 12 91 4 9 105 5 7 132 6 12 105 7 8 87 8 5 108 9 13 99 10 17 149 11 12 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 83 41 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 441 22 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 440 76 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 439 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 432 7 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 435 2 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 435 29 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 20 23 plFiberPlate : 108 possible sky positions to use as objects from a possible 598. plFiberPlate : 52 possible sky positions to use as objects from a possible 597. plFiberPlate : 29 possible sky positions to use as objects from a possible 596. plFiberPlate : 26 possible sky positions to use as objects from a possible 595. plFiberPlate : 15 possible sky positions to use as objects from a possible 594. plFiberPlate : 42 possible sky positions to use as objects from a possible 593. plFiberPlate : 40 possible sky positions to use as objects from a possible 592. plFiberPlate : 75 possible sky positions to use as objects from a possible 591. plFiberPlate : 57 possible sky positions to use as objects from a possible 590. plFiberPlate : 39 possible sky positions to use as objects from a possible 589. plFiberPlate : 15 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 20 possible sky positions to use as objects from a possible 586. plFiberPlate : 17 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 16 possible sky positions to use as objects from a possible 583. plFiberPlate : 84 possible sky positions to use as objects from a possible 582. plFiberPlate : 67 possible sky positions to use as objects from a possible 581. plFiberPlate : 37 possible sky positions to use as objects from a possible 580. plFiberPlate : 19 possible sky positions to use as objects from a possible 579. plFiberPlate : 2 possible sky positions to use as objects from a possible 578. plFiberPlate : 20 possible sky positions to use as objects from a possible 577. plFiberPlate : 18 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 18 possible sky positions to use as objects from a possible 574. plFiberPlate : 54 possible sky positions to use as objects from a possible 573. plFiberPlate : 42 possible sky positions to use as objects from a possible 572. plFiberPlate : 26 possible sky positions to use as objects from a possible 571. plFiberPlate : 6 possible sky positions to use as objects from a possible 570. plFiberPlate : 11 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : 26 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2229.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2230.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2230.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2231.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 121 2 5 85 3 7 76 4 9 103 5 7 122 6 6 88 7 4 90 8 5 107 9 4 82 10 12 145 11 5 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 94 17 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 84 2 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 209 40 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 95 24 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 90 28 plFiberPlate : adding spectro-photo std with objId = 5115 40 4 99 43 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 96 83 plFiberPlate : adding spectro-photo std with objId = 5115 40 4 89 40 plFiberPlate : 102 possible sky positions to use as objects from a possible 586. plFiberPlate : 89 possible sky positions to use as objects from a possible 585. plFiberPlate : 53 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 28 possible sky positions to use as objects from a possible 582. plFiberPlate : 39 possible sky positions to use as objects from a possible 581. plFiberPlate : 64 possible sky positions to use as objects from a possible 580. plFiberPlate : 76 possible sky positions to use as objects from a possible 579. plFiberPlate : 57 possible sky positions to use as objects from a possible 578. plFiberPlate : 36 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 17 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 7 possible sky positions to use as objects from a possible 572. plFiberPlate : 13 possible sky positions to use as objects from a possible 571. plFiberPlate : 75 possible sky positions to use as objects from a possible 570. plFiberPlate : 47 possible sky positions to use as objects from a possible 569. plFiberPlate : 25 possible sky positions to use as objects from a possible 568. plFiberPlate : 9 possible sky positions to use as objects from a possible 567. plFiberPlate : 6 possible sky positions to use as objects from a possible 566. plFiberPlate : 6 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 28 possible sky positions to use as objects from a possible 562. plFiberPlate : 46 possible sky positions to use as objects from a possible 561. plFiberPlate : 43 possible sky positions to use as objects from a possible 560. plFiberPlate : 21 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 4 possible sky positions to use as objects from a possible 557. plFiberPlate : 26 possible sky positions to use as objects from a possible 556. plFiberPlate : 27 possible sky positions to use as objects from a possible 555. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2230.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2231.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2231.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2232.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 127 2 8 111 3 4 102 4 8 122 5 6 133 6 7 114 7 9 95 8 7 119 9 10 113 10 17 160 11 20 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 443 46 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 444 26 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 95 33 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 452 13 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 454 58 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 31 102 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 24 49 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 37 22 plFiberPlate : 116 possible sky positions to use as objects from a possible 648. plFiberPlate : 82 possible sky positions to use as objects from a possible 647. plFiberPlate : 47 possible sky positions to use as objects from a possible 646. plFiberPlate : 25 possible sky positions to use as objects from a possible 645. plFiberPlate : 33 possible sky positions to use as objects from a possible 644. plFiberPlate : 28 possible sky positions to use as objects from a possible 643. plFiberPlate : 74 possible sky positions to use as objects from a possible 642. plFiberPlate : 79 possible sky positions to use as objects from a possible 641. plFiberPlate : 59 possible sky positions to use as objects from a possible 640. plFiberPlate : 36 possible sky positions to use as objects from a possible 639. plFiberPlate : 25 possible sky positions to use as objects from a possible 638. plFiberPlate : 19 possible sky positions to use as objects from a possible 637. plFiberPlate : 16 possible sky positions to use as objects from a possible 636. plFiberPlate : 17 possible sky positions to use as objects from a possible 635. plFiberPlate : 20 possible sky positions to use as objects from a possible 634. plFiberPlate : 30 possible sky positions to use as objects from a possible 633. plFiberPlate : 91 possible sky positions to use as objects from a possible 632. plFiberPlate : 68 possible sky positions to use as objects from a possible 631. plFiberPlate : 38 possible sky positions to use as objects from a possible 630. plFiberPlate : 27 possible sky positions to use as objects from a possible 629. plFiberPlate : 10 possible sky positions to use as objects from a possible 628. plFiberPlate : 10 possible sky positions to use as objects from a possible 627. plFiberPlate : 18 possible sky positions to use as objects from a possible 626. plFiberPlate : 31 possible sky positions to use as objects from a possible 625. plFiberPlate : 10 possible sky positions to use as objects from a possible 624. plFiberPlate : 45 possible sky positions to use as objects from a possible 623. plFiberPlate : 26 possible sky positions to use as objects from a possible 622. plFiberPlate : 8 possible sky positions to use as objects from a possible 621. plFiberPlate : 3 possible sky positions to use as objects from a possible 620. plFiberPlate : 10 possible sky positions to use as objects from a possible 619. plFiberPlate : 11 possible sky positions to use as objects from a possible 618. plFiberPlate : 8 possible sky positions to use as objects from a possible 617. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2231.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2232.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2232.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2233.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 126 2 6 87 3 5 83 4 8 114 5 3 117 6 2 100 7 3 81 8 6 98 9 4 111 10 13 160 11 9 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 214 5 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 94 17 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 225 131 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 220 17 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 95 24 plFiberPlate : adding spectro-photo std with objId = 5115 40 4 99 43 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 96 83 plFiberPlate : adding spectro-photo std with objId = 5115 40 4 89 40 plFiberPlate : 127 possible sky positions to use as objects from a possible 589. plFiberPlate : 61 possible sky positions to use as objects from a possible 588. plFiberPlate : 26 possible sky positions to use as objects from a possible 587. plFiberPlate : 29 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 31 possible sky positions to use as objects from a possible 584. plFiberPlate : 32 possible sky positions to use as objects from a possible 583. plFiberPlate : 67 possible sky positions to use as objects from a possible 582. plFiberPlate : 47 possible sky positions to use as objects from a possible 581. plFiberPlate : 38 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 9 possible sky positions to use as objects from a possible 578. plFiberPlate : 24 possible sky positions to use as objects from a possible 577. plFiberPlate : 21 possible sky positions to use as objects from a possible 576. plFiberPlate : 8 possible sky positions to use as objects from a possible 575. plFiberPlate : 24 possible sky positions to use as objects from a possible 574. plFiberPlate : 71 possible sky positions to use as objects from a possible 573. plFiberPlate : 67 possible sky positions to use as objects from a possible 572. plFiberPlate : 57 possible sky positions to use as objects from a possible 571. plFiberPlate : 34 possible sky positions to use as objects from a possible 570. plFiberPlate : 11 possible sky positions to use as objects from a possible 569. plFiberPlate : 21 possible sky positions to use as objects from a possible 568. plFiberPlate : 7 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 18 possible sky positions to use as objects from a possible 565. plFiberPlate : 32 possible sky positions to use as objects from a possible 564. plFiberPlate : 35 possible sky positions to use as objects from a possible 563. plFiberPlate : 46 possible sky positions to use as objects from a possible 562. plFiberPlate : 18 possible sky positions to use as objects from a possible 561. plFiberPlate : 10 possible sky positions to use as objects from a possible 560. plFiberPlate : 9 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2232.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2233.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2233.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2234.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 132 2 3 96 3 5 90 4 11 103 5 7 119 6 11 95 7 4 104 8 10 120 9 9 111 10 10 140 11 6 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 41 28 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 467 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 40 22 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 460 24 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 465 59 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 465 21 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 472 55 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 49 15 plFiberPlate : 93 possible sky positions to use as objects from a possible 614. plFiberPlate : 73 possible sky positions to use as objects from a possible 613. plFiberPlate : 43 possible sky positions to use as objects from a possible 612. plFiberPlate : 9 possible sky positions to use as objects from a possible 611. plFiberPlate : 21 possible sky positions to use as objects from a possible 610. plFiberPlate : 49 possible sky positions to use as objects from a possible 609. plFiberPlate : 57 possible sky positions to use as objects from a possible 608. plFiberPlate : 77 possible sky positions to use as objects from a possible 607. plFiberPlate : 61 possible sky positions to use as objects from a possible 606. plFiberPlate : 39 possible sky positions to use as objects from a possible 605. plFiberPlate : 33 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 22 possible sky positions to use as objects from a possible 601. plFiberPlate : 28 possible sky positions to use as objects from a possible 600. plFiberPlate : 30 possible sky positions to use as objects from a possible 599. plFiberPlate : 82 possible sky positions to use as objects from a possible 598. plFiberPlate : 42 possible sky positions to use as objects from a possible 597. plFiberPlate : 29 possible sky positions to use as objects from a possible 596. plFiberPlate : 19 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 25 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 22 possible sky positions to use as objects from a possible 590. plFiberPlate : 47 possible sky positions to use as objects from a possible 589. plFiberPlate : 44 possible sky positions to use as objects from a possible 588. plFiberPlate : 29 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 18 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2233.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2234.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2234.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2235.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 108 2 4 73 3 2 62 4 8 91 5 9 115 6 5 96 7 8 104 8 17 111 9 6 109 10 10 133 11 7 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 48 3 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 225 131 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 243 20 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 227 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 1 230 68 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 235 91 plFiberPlate : adding spectro-photo std with objId = 5087 40 1 235 43 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 106 12 plFiberPlate : 104 possible sky positions to use as objects from a possible 556. plFiberPlate : 76 possible sky positions to use as objects from a possible 555. plFiberPlate : 41 possible sky positions to use as objects from a possible 554. plFiberPlate : 26 possible sky positions to use as objects from a possible 553. plFiberPlate : 31 possible sky positions to use as objects from a possible 552. plFiberPlate : 37 possible sky positions to use as objects from a possible 551. plFiberPlate : 39 possible sky positions to use as objects from a possible 550. plFiberPlate : 64 possible sky positions to use as objects from a possible 549. plFiberPlate : 57 possible sky positions to use as objects from a possible 548. plFiberPlate : 40 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 15 possible sky positions to use as objects from a possible 545. plFiberPlate : 15 possible sky positions to use as objects from a possible 544. plFiberPlate : 3 possible sky positions to use as objects from a possible 543. plFiberPlate : 12 possible sky positions to use as objects from a possible 542. plFiberPlate : 15 possible sky positions to use as objects from a possible 541. plFiberPlate : 68 possible sky positions to use as objects from a possible 540. plFiberPlate : 44 possible sky positions to use as objects from a possible 539. plFiberPlate : 32 possible sky positions to use as objects from a possible 538. plFiberPlate : 24 possible sky positions to use as objects from a possible 537. plFiberPlate : 21 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 7 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 21 possible sky positions to use as objects from a possible 532. plFiberPlate : 63 possible sky positions to use as objects from a possible 531. plFiberPlate : 43 possible sky positions to use as objects from a possible 530. plFiberPlate : 23 possible sky positions to use as objects from a possible 529. plFiberPlate : 25 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 29 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2234.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2235.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2235.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2236.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 7 80 3 4 70 4 8 89 5 17 122 6 14 102 7 10 96 8 5 102 9 11 104 10 8 148 11 10 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 236 2 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 120 42 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 252 117 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 127 22 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 250 63 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 126 83 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 246 38 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 127 42 plFiberPlate : 109 possible sky positions to use as objects from a possible 557. plFiberPlate : 69 possible sky positions to use as objects from a possible 556. plFiberPlate : 29 possible sky positions to use as objects from a possible 555. plFiberPlate : 19 possible sky positions to use as objects from a possible 554. plFiberPlate : 18 possible sky positions to use as objects from a possible 553. plFiberPlate : 42 possible sky positions to use as objects from a possible 552. plFiberPlate : 48 possible sky positions to use as objects from a possible 551. plFiberPlate : 72 possible sky positions to use as objects from a possible 550. plFiberPlate : 58 possible sky positions to use as objects from a possible 549. plFiberPlate : 45 possible sky positions to use as objects from a possible 548. plFiberPlate : 24 possible sky positions to use as objects from a possible 547. plFiberPlate : 13 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 24 possible sky positions to use as objects from a possible 543. plFiberPlate : 20 possible sky positions to use as objects from a possible 542. plFiberPlate : 59 possible sky positions to use as objects from a possible 541. plFiberPlate : 36 possible sky positions to use as objects from a possible 540. plFiberPlate : 24 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 9 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 12 possible sky positions to use as objects from a possible 533. plFiberPlate : 48 possible sky positions to use as objects from a possible 532. plFiberPlate : 53 possible sky positions to use as objects from a possible 531. plFiberPlate : 43 possible sky positions to use as objects from a possible 530. plFiberPlate : 15 possible sky positions to use as objects from a possible 529. plFiberPlate : 17 possible sky positions to use as objects from a possible 528. plFiberPlate : 30 possible sky positions to use as objects from a possible 527. plFiberPlate : 26 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2235.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2236.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2236.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2237.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 124 2 6 95 3 7 86 4 10 115 5 13 132 6 9 95 7 10 91 8 7 104 9 11 105 10 15 160 11 8 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 58 29 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 485 54 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 52 19 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 472 55 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 58 92 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 59 86 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 475 73 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 478 94 plFiberPlate : 120 possible sky positions to use as objects from a possible 618. plFiberPlate : 92 possible sky positions to use as objects from a possible 617. plFiberPlate : 53 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 24 possible sky positions to use as objects from a possible 614. plFiberPlate : 30 possible sky positions to use as objects from a possible 613. plFiberPlate : 51 possible sky positions to use as objects from a possible 612. plFiberPlate : 88 possible sky positions to use as objects from a possible 611. plFiberPlate : 59 possible sky positions to use as objects from a possible 610. plFiberPlate : 23 possible sky positions to use as objects from a possible 609. plFiberPlate : 13 possible sky positions to use as objects from a possible 608. plFiberPlate : 9 possible sky positions to use as objects from a possible 607. plFiberPlate : 7 possible sky positions to use as objects from a possible 606. plFiberPlate : 25 possible sky positions to use as objects from a possible 605. plFiberPlate : 15 possible sky positions to use as objects from a possible 604. plFiberPlate : 17 possible sky positions to use as objects from a possible 603. plFiberPlate : 83 possible sky positions to use as objects from a possible 602. plFiberPlate : 46 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 8 possible sky positions to use as objects from a possible 599. plFiberPlate : 18 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 13 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 4 possible sky positions to use as objects from a possible 594. plFiberPlate : 62 possible sky positions to use as objects from a possible 593. plFiberPlate : 36 possible sky positions to use as objects from a possible 592. plFiberPlate : 20 possible sky positions to use as objects from a possible 591. plFiberPlate : 11 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 22 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2236.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2237.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2237.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2238.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 113 2 7 73 3 9 71 4 11 118 5 5 123 6 6 101 7 7 105 8 12 118 9 7 115 10 13 144 11 5 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 125 26 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 252 117 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 246 38 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 256 11 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 258 51 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 131 135 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 257 34 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 127 42 plFiberPlate : 122 possible sky positions to use as objects from a possible 592. plFiberPlate : 79 possible sky positions to use as objects from a possible 591. plFiberPlate : 31 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 28 possible sky positions to use as objects from a possible 587. plFiberPlate : 50 possible sky positions to use as objects from a possible 586. plFiberPlate : 91 possible sky positions to use as objects from a possible 585. plFiberPlate : 50 possible sky positions to use as objects from a possible 584. plFiberPlate : 26 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 17 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 79 possible sky positions to use as objects from a possible 576. plFiberPlate : 58 possible sky positions to use as objects from a possible 575. plFiberPlate : 46 possible sky positions to use as objects from a possible 574. plFiberPlate : 22 possible sky positions to use as objects from a possible 573. plFiberPlate : 7 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 58 possible sky positions to use as objects from a possible 567. plFiberPlate : 33 possible sky positions to use as objects from a possible 566. plFiberPlate : 23 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : 17 possible sky positions to use as objects from a possible 562. plFiberPlate : 34 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2237.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2238.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2238.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2239.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 127 2 4 94 3 5 85 4 6 114 5 7 128 6 5 110 7 6 93 8 8 112 9 8 101 10 8 141 11 9 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 65 6 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 66 2 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 65 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 485 66 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 494 6 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 487 35 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 494 47 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 495 21 plFiberPlate : 111 possible sky positions to use as objects from a possible 627. plFiberPlate : 70 possible sky positions to use as objects from a possible 626. plFiberPlate : 36 possible sky positions to use as objects from a possible 625. plFiberPlate : 34 possible sky positions to use as objects from a possible 624. plFiberPlate : 16 possible sky positions to use as objects from a possible 623. plFiberPlate : 25 possible sky positions to use as objects from a possible 622. plFiberPlate : 44 possible sky positions to use as objects from a possible 621. plFiberPlate : 103 possible sky positions to use as objects from a possible 620. plFiberPlate : 72 possible sky positions to use as objects from a possible 619. plFiberPlate : 41 possible sky positions to use as objects from a possible 618. plFiberPlate : 26 possible sky positions to use as objects from a possible 617. plFiberPlate : 14 possible sky positions to use as objects from a possible 616. plFiberPlate : 27 possible sky positions to use as objects from a possible 615. plFiberPlate : 11 possible sky positions to use as objects from a possible 614. plFiberPlate : 11 possible sky positions to use as objects from a possible 613. plFiberPlate : 38 possible sky positions to use as objects from a possible 612. plFiberPlate : 55 possible sky positions to use as objects from a possible 611. plFiberPlate : 26 possible sky positions to use as objects from a possible 610. plFiberPlate : 14 possible sky positions to use as objects from a possible 609. plFiberPlate : 5 possible sky positions to use as objects from a possible 608. plFiberPlate : 3 possible sky positions to use as objects from a possible 607. plFiberPlate : 10 possible sky positions to use as objects from a possible 606. plFiberPlate : 13 possible sky positions to use as objects from a possible 605. plFiberPlate : 8 possible sky positions to use as objects from a possible 604. plFiberPlate : 37 possible sky positions to use as objects from a possible 603. plFiberPlate : 49 possible sky positions to use as objects from a possible 602. plFiberPlate : 25 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 4 possible sky positions to use as objects from a possible 599. plFiberPlate : 20 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 4 possible sky positions to use as objects from a possible 596. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2238.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2239.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2239.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2240.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 123 2 7 101 3 4 88 4 8 114 5 10 159 6 8 112 7 6 84 8 4 89 9 6 100 10 12 155 11 8 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 267 15 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 140 60 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 271 39 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 267 10 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 137 97 plFiberPlate : adding spectro-photo std with objId = 5115 40 2 144 16 plFiberPlate : adding spectro-photo std with objId = 5115 40 2 152 7 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 258 51 plFiberPlate : 144 possible sky positions to use as objects from a possible 617. plFiberPlate : 69 possible sky positions to use as objects from a possible 616. plFiberPlate : 37 possible sky positions to use as objects from a possible 615. plFiberPlate : 24 possible sky positions to use as objects from a possible 614. plFiberPlate : 30 possible sky positions to use as objects from a possible 613. plFiberPlate : 45 possible sky positions to use as objects from a possible 612. plFiberPlate : 40 possible sky positions to use as objects from a possible 611. plFiberPlate : 90 possible sky positions to use as objects from a possible 610. plFiberPlate : 59 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 11 possible sky positions to use as objects from a possible 607. plFiberPlate : 12 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 5 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 16 possible sky positions to use as objects from a possible 602. plFiberPlate : 62 possible sky positions to use as objects from a possible 601. plFiberPlate : 15 possible sky positions to use as objects from a possible 600. plFiberPlate : 4 possible sky positions to use as objects from a possible 599. plFiberPlate : 5 possible sky positions to use as objects from a possible 598. plFiberPlate : 2 possible sky positions to use as objects from a possible 597. plFiberPlate : 3 possible sky positions to use as objects from a possible 596. plFiberPlate : 5 possible sky positions to use as objects from a possible 595. plFiberPlate : 5 possible sky positions to use as objects from a possible 594. plFiberPlate : 6 possible sky positions to use as objects from a possible 593. plFiberPlate : 77 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 1 possible sky positions to use as objects from a possible 588. plFiberPlate : 3 possible sky positions to use as objects from a possible 587. plFiberPlate : 3 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2239.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2240.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2240.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2241.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 145 2 7 100 3 9 84 4 10 107 5 7 98 6 6 82 7 8 83 8 8 113 9 5 73 10 12 178 11 4 130 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 267 15 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 152 180 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 275 86 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 141 52 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 271 39 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 267 10 plFiberPlate : adding spectro-photo std with objId = 5115 40 2 152 7 plFiberPlate : adding spectro-photo std with objId = 5115 40 2 158 4 plFiberPlate : 112 possible sky positions to use as objects from a possible 600. plFiberPlate : 115 possible sky positions to use as objects from a possible 599. plFiberPlate : 78 possible sky positions to use as objects from a possible 598. plFiberPlate : 35 possible sky positions to use as objects from a possible 597. plFiberPlate : 22 possible sky positions to use as objects from a possible 596. plFiberPlate : 79 possible sky positions to use as objects from a possible 595. plFiberPlate : 54 possible sky positions to use as objects from a possible 594. plFiberPlate : 67 possible sky positions to use as objects from a possible 593. plFiberPlate : 52 possible sky positions to use as objects from a possible 592. plFiberPlate : 37 possible sky positions to use as objects from a possible 591. plFiberPlate : 22 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 30 possible sky positions to use as objects from a possible 586. plFiberPlate : 44 possible sky positions to use as objects from a possible 585. plFiberPlate : 20 possible sky positions to use as objects from a possible 584. plFiberPlate : 9 possible sky positions to use as objects from a possible 583. plFiberPlate : 2 possible sky positions to use as objects from a possible 582. plFiberPlate : 0 possible sky positions to use as objects from a possible 581. plFiberPlate: No sky found for bundle at -28.566 145.203, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 581. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 580. plFiberPlate: No sky found for bundle at -3.144 143.705, increase box by 90 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 580. plFiberPlate : 0 possible sky positions to use as objects from a possible 579. plFiberPlate: No sky found for bundle at 14.456 145.099, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 579. plFiberPlate: No sky found for bundle at 14.456 145.099, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 579. plFiberPlate: No sky found for bundle at 14.456 145.099, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 579. plFiberPlate: No sky found for bundle at 14.456 145.099, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 579. plFiberPlate: No sky found for bundle at 14.456 145.099, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 579. plFiberPlate: No sky found for bundle at 14.456 145.099, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 579. plFiberPlate: No sky found for bundle at 14.456 145.099, increase box by 70 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 579. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 110 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 120 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 130 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 140 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 150 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 160 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 170 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 180 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 190 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 200 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 210 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 578. plFiberPlate: No sky found for bundle at 36.774 144.281, increase box by 220 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 578. plFiberPlate : 3 possible sky positions to use as objects from a possible 577. plFiberPlate : 18 possible sky positions to use as objects from a possible 576. plFiberPlate : 40 possible sky positions to use as objects from a possible 575. plFiberPlate : 29 possible sky positions to use as objects from a possible 574. plFiberPlate : 4 possible sky positions to use as objects from a possible 573. plFiberPlate : 0 possible sky positions to use as objects from a possible 572. plFiberPlate: No sky found for bundle at 22.387 200.064, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 572. plFiberPlate: No sky found for bundle at 22.387 200.064, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 572. plFiberPlate: No sky found for bundle at 22.387 200.064, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 572. plFiberPlate : 2 possible sky positions to use as objects from a possible 571. plFiberPlate : 1 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2240.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2241.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2241.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2242.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 125 2 6 76 3 5 59 4 6 100 5 7 109 6 11 109 7 10 85 8 7 102 9 9 110 10 11 138 11 6 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 152 180 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 157 82 plFiberPlate : adding spectro-photo std with objId = 5115 40 4 166 27 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 289 79 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 291 17 plFiberPlate : adding spectro-photo std with objId = 5115 40 2 158 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 161 2 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 170 73 plFiberPlate : 110 possible sky positions to use as objects from a possible 564. plFiberPlate : 58 possible sky positions to use as objects from a possible 563. plFiberPlate : 17 possible sky positions to use as objects from a possible 562. plFiberPlate : 21 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : 26 possible sky positions to use as objects from a possible 559. plFiberPlate : 51 possible sky positions to use as objects from a possible 558. plFiberPlate : 83 possible sky positions to use as objects from a possible 557. plFiberPlate : 62 possible sky positions to use as objects from a possible 556. plFiberPlate : 56 possible sky positions to use as objects from a possible 555. plFiberPlate : 47 possible sky positions to use as objects from a possible 554. plFiberPlate : 36 possible sky positions to use as objects from a possible 553. plFiberPlate : 9 possible sky positions to use as objects from a possible 552. plFiberPlate : 24 possible sky positions to use as objects from a possible 551. plFiberPlate : 21 possible sky positions to use as objects from a possible 550. plFiberPlate : 28 possible sky positions to use as objects from a possible 549. plFiberPlate : 77 possible sky positions to use as objects from a possible 548. plFiberPlate : 72 possible sky positions to use as objects from a possible 547. plFiberPlate : 56 possible sky positions to use as objects from a possible 546. plFiberPlate : 54 possible sky positions to use as objects from a possible 545. plFiberPlate : 31 possible sky positions to use as objects from a possible 544. plFiberPlate : 12 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 20 possible sky positions to use as objects from a possible 541. plFiberPlate : 30 possible sky positions to use as objects from a possible 540. plFiberPlate : 31 possible sky positions to use as objects from a possible 539. plFiberPlate : 30 possible sky positions to use as objects from a possible 538. plFiberPlate : 30 possible sky positions to use as objects from a possible 537. plFiberPlate : 33 possible sky positions to use as objects from a possible 536. plFiberPlate : 22 possible sky positions to use as objects from a possible 535. plFiberPlate : 8 possible sky positions to use as objects from a possible 534. plFiberPlate : 23 possible sky positions to use as objects from a possible 533. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2241.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2242.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2242.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2243.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 124 2 5 87 3 4 79 4 6 99 5 6 121 6 3 92 7 11 91 8 13 107 9 5 102 10 8 149 11 6 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 169 14 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 176 89 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 291 64 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 305 14 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 168 64 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 307 21 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 170 73 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 182 31 plFiberPlate : 114 possible sky positions to use as objects from a possible 579. plFiberPlate : 73 possible sky positions to use as objects from a possible 578. plFiberPlate : 52 possible sky positions to use as objects from a possible 577. plFiberPlate : 37 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : 36 possible sky positions to use as objects from a possible 574. plFiberPlate : 56 possible sky positions to use as objects from a possible 573. plFiberPlate : 67 possible sky positions to use as objects from a possible 572. plFiberPlate : 47 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 8 possible sky positions to use as objects from a possible 568. plFiberPlate : 12 possible sky positions to use as objects from a possible 567. plFiberPlate : 20 possible sky positions to use as objects from a possible 566. plFiberPlate : 22 possible sky positions to use as objects from a possible 565. plFiberPlate : 8 possible sky positions to use as objects from a possible 564. plFiberPlate : 72 possible sky positions to use as objects from a possible 563. plFiberPlate : 57 possible sky positions to use as objects from a possible 562. plFiberPlate : 37 possible sky positions to use as objects from a possible 561. plFiberPlate : 13 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 8 possible sky positions to use as objects from a possible 557. plFiberPlate : 27 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 46 possible sky positions to use as objects from a possible 554. plFiberPlate : 34 possible sky positions to use as objects from a possible 553. plFiberPlate : 21 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 27 possible sky positions to use as objects from a possible 550. plFiberPlate : 23 possible sky positions to use as objects from a possible 549. plFiberPlate : 11 possible sky positions to use as objects from a possible 548. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2242.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2243.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2243.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2244.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 100 2 5 62 3 2 55 4 1 101 5 7 131 6 7 99 7 5 88 8 8 103 9 5 98 10 7 122 11 7 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 182 70 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 183 98 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 312 44 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 189 18 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 193 74 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 307 21 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 191 14 plFiberPlate : adding spectro-photo std with objId = 5115 40 3 182 31 plFiberPlate : 107 possible sky positions to use as objects from a possible 542. plFiberPlate : 78 possible sky positions to use as objects from a possible 541. plFiberPlate : 48 possible sky positions to use as objects from a possible 540. plFiberPlate : 20 possible sky positions to use as objects from a possible 539. plFiberPlate : 16 possible sky positions to use as objects from a possible 538. plFiberPlate : 26 possible sky positions to use as objects from a possible 537. plFiberPlate : 37 possible sky positions to use as objects from a possible 536. plFiberPlate : 71 possible sky positions to use as objects from a possible 535. plFiberPlate : 36 possible sky positions to use as objects from a possible 534. plFiberPlate : 22 possible sky positions to use as objects from a possible 533. plFiberPlate : 11 possible sky positions to use as objects from a possible 532. plFiberPlate : 8 possible sky positions to use as objects from a possible 531. plFiberPlate : 7 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 22 possible sky positions to use as objects from a possible 528. plFiberPlate : 4 possible sky positions to use as objects from a possible 527. plFiberPlate : 72 possible sky positions to use as objects from a possible 526. plFiberPlate : 23 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 5 possible sky positions to use as objects from a possible 523. plFiberPlate : 9 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 2 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 35 possible sky positions to use as objects from a possible 518. plFiberPlate : 49 possible sky positions to use as objects from a possible 517. plFiberPlate : 41 possible sky positions to use as objects from a possible 516. plFiberPlate : 15 possible sky positions to use as objects from a possible 515. plFiberPlate : 21 possible sky positions to use as objects from a possible 514. plFiberPlate : 4 possible sky positions to use as objects from a possible 513. plFiberPlate : 20 possible sky positions to use as objects from a possible 512. plFiberPlate : 14 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2243.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2244.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2244.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2245.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 104 2 8 70 3 11 66 4 8 107 5 10 133 6 4 117 7 9 96 8 12 104 9 10 118 10 13 126 11 10 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5115 40 1 205 18 plFiberPlate : adding spectro-photo std with objId = 5115 40 2 194 88 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 325 14 plFiberPlate : adding spectro-photo std with objId = 4670 40 1 51 41 plFiberPlate : adding spectro-photo std with objId = 4674 40 4 13 38 plFiberPlate : adding spectro-photo std with objId = 5115 40 6 198 29 plFiberPlate : adding spectro-photo std with objId = 5115 40 5 193 74 plFiberPlate : adding spectro-photo std with objId = 5115 40 4 199 76 plFiberPlate : 112 possible sky positions to use as objects from a possible 565. plFiberPlate : 54 possible sky positions to use as objects from a possible 564. plFiberPlate : 28 possible sky positions to use as objects from a possible 563. plFiberPlate : 15 possible sky positions to use as objects from a possible 562. plFiberPlate : 29 possible sky positions to use as objects from a possible 561. plFiberPlate : 18 possible sky positions to use as objects from a possible 560. plFiberPlate : 45 possible sky positions to use as objects from a possible 559. plFiberPlate : 81 possible sky positions to use as objects from a possible 558. plFiberPlate : 36 possible sky positions to use as objects from a possible 557. plFiberPlate : 19 possible sky positions to use as objects from a possible 556. plFiberPlate : 5 possible sky positions to use as objects from a possible 555. plFiberPlate : 7 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 20 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 68 possible sky positions to use as objects from a possible 549. plFiberPlate : 24 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 8 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 6 possible sky positions to use as objects from a possible 541. plFiberPlate : 98 possible sky positions to use as objects from a possible 540. plFiberPlate : 60 possible sky positions to use as objects from a possible 539. plFiberPlate : 49 possible sky positions to use as objects from a possible 538. plFiberPlate : 35 possible sky positions to use as objects from a possible 537. plFiberPlate : 27 possible sky positions to use as objects from a possible 536. plFiberPlate : 19 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2244.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2245.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2245.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.05.1/plPlugMapP-2246.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 138 2 8 90 3 9 75 4 10 105 5 14 123 6 8 116 7 8 85 8 8 98 9 9 91 10 17 144 11 13 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 55 36 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 56 42 plFiberPlate : adding spectro-photo std with objId = 4670 40 5 54 65 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 330 9 plFiberPlate : adding spectro-photo std with objId = 4674 40 4 13 38 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 60 24 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 55 94 plFiberPlate : adding spectro-photo std with objId = 4670 40 1 54 33 plFiberPlate : 97 possible sky positions to use as objects from a possible 572. plFiberPlate : 83 possible sky positions to use as objects from a possible 571. plFiberPlate : 39 possible sky positions to use as objects from a possible 570. plFiberPlate : 19 possible sky positions to use as objects from a possible 569. plFiberPlate : 24 possible sky positions to use as objects from a possible 568. plFiberPlate : 36 possible sky positions to use as objects from a possible 567. plFiberPlate : 20 possible sky positions to use as objects from a possible 566. plFiberPlate : 56 possible sky positions to use as objects from a possible 565. plFiberPlate : 36 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : 11 possible sky positions to use as objects from a possible 562. plFiberPlate : 8 possible sky positions to use as objects from a possible 561. plFiberPlate : 6 possible sky positions to use as objects from a possible 560. plFiberPlate : 7 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 5 possible sky positions to use as objects from a possible 557. plFiberPlate : 34 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 1 possible sky positions to use as objects from a possible 554. plFiberPlate : 1 possible sky positions to use as objects from a possible 553. plFiberPlate : 0 possible sky positions to use as objects from a possible 552. plFiberPlate: No sky found for bundle at 29.754 76.049, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 552. plFiberPlate: No sky found for bundle at 29.754 76.049, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 552. plFiberPlate: No sky found for bundle at 29.754 76.049, increase box by 30 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 552. plFiberPlate : 1 possible sky positions to use as objects from a possible 551. plFiberPlate : 1 possible sky positions to use as objects from a possible 550. plFiberPlate : 4 possible sky positions to use as objects from a possible 549. plFiberPlate : 8 possible sky positions to use as objects from a possible 548. plFiberPlate : 73 possible sky positions to use as objects from a possible 547. plFiberPlate : 38 possible sky positions to use as objects from a possible 546. plFiberPlate : 17 possible sky positions to use as objects from a possible 545. plFiberPlate : 6 possible sky positions to use as objects from a possible 544. plFiberPlate : 17 possible sky positions to use as objects from a possible 543. plFiberPlate : 5 possible sky positions to use as objects from a possible 542. plFiberPlate : 5 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2245.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2246.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.05.1/plOverlay-2246.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue May 17 16:49:40 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_232/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_232/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 36 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2211.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7447,-4.5474) and (12.33,-2.98) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2211.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2211.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2212.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2212.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2212.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2213.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.3636,-12.3372) and (2.43,-12.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2213.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2213.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2214.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2214.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2214.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2215.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7835,-4.2302) and (12.55,-1.98) plMakeFanucCodes : fixed path between (-10.6059,6.6317) and (-11.67,5.14) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2215.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2215.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2216.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2216.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2216.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2217.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.2493,10.9779) and (-2.10,12.61) plMakeFanucCodes : fixed path between (-11.3425,-5.4641) and (-12.07,-3.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2217.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2217.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2218.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2218.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2218.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2219.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3234,4.5930) and (12.46,2.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2219.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2219.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2220.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2220.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2220.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2221.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.7284,-6.7778) and (-11.25,-6.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2221.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.3129,7.9668) and (0.84,12.64) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2221.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2222.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2222.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2222.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2223.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2223.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2223.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2224.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.6263,-10.7550) and (4.13,-11.78) plMakeFanucCodes : fixed path between (3.1040,11.9368) and (1.27,12.65) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2224.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7053,-5.8249) and (12.41,-2.70) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2224.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2225.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2225.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2225.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2226.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.8887,12.0116) and (-2.83,12.46) plMakeFanucCodes : fixed path between (-11.6090,-5.0879) and (-11.97,-3.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2226.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2226.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2227.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.4971,8.5141) and (10.45,6.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2227.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2227.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2228.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2228.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2228.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2229.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.6194,11.3753) and (-3.78,12.11) plMakeFanucCodes : fixed path between (-3.7846,12.1148) and (-1.56,12.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2229.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2229.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2230.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2230.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2230.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2231.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.9846,11.3873) and (2.66,12.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2231.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2231.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2232.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.1611,5.9922) and (-11.85,4.24) plMakeFanucCodes : fixed path between (-5.1570,-11.6187) and (-4.07,-11.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2232.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2232.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2233.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4175,-3.6383) and (12.63,-1.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2233.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2233.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2234.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.1228,6.1245) and (11.55,5.13) plMakeFanucCodes : fixed path between (11.5549,5.1320) and (12.03,4.24) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2234.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2234.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2235.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.8890,-6.5864) and (12.00,-4.00) plMakeFanucCodes : fixed path between (-10.3406,7.3384) and (-11.17,5.75) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2235.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2235.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2236.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2236.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2236.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2237.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.3127,-11.2744) and (4.28,-12.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2237.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2237.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2238.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2238.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2238.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2239.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2239.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2239.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2240.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.2201,-11.1236) and (4.56,-11.87) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2240.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2240.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2241.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9239,6.5990) and (-11.30,5.67) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2241.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2241.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2242.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2242.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2242.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2243.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.0768,12.3671) and (1.68,12.58) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2243.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2243.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2244.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2244.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2244.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.2993,10.9877) and (2.19,12.53) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2245.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.5689,7.2199) and (11.28,6.02) plMakeFanucCodes : fixed path between (11.2789,6.0194) and (11.56,4.47) plMakeFanucCodes : fixed path between (-10.7989,-6.5650) and (-11.46,-4.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2245.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2245.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2246.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2246.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.05.1/plFanuc-2246.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Tue May 17 16:51:12 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_232/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_232/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x97b61c4 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 36 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2211 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2212 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2213 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2214 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2215 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2216 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2217 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2218 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2219 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2220 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2221 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2222 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2223 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2224 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2225 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2226 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2227 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2228 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2229 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2230 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2231 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2232 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2233 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2234 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2235 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2236 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2237 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2238 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2239 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2240 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2241 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2242 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2243 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2244 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2245 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2246 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue May 17 16:51:45 CDT 2005 Begin running "plateEnder dr2005.05.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_232/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_232/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.05.1 -morePipes 1" failed. PS: Read file for stderr output of this job.