Sender: LSF System Subject: Job 267668: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Apr 9 00:12:54 2008 Results reported at Wed Apr 9 00:14:49 2008 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash ## # WARNING: THIS SCRIPT WAS AUTOMATICALLY GENERATED on Wed Apr 9 00:12:41 CDT 2008 # dp version: v20_27 DP_DIR: /sdss/ups/prd/dp/v20_27/NULL # on host sdssdp41 user: hlin ## . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2008.04.5 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 35.32 sec. Max Memory : 11 MB Max Swap : 28 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Wed Apr 9 00:13:13 CDT 2008 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Apr 9 00:13:47 CDT 2008 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/lsf/v5_1/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_7/Linux-2-4-2-3-2:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/ups/v4_7_3/Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86/bin:/sdss/ups/prd/gcc/v2_95_2/Linux-2-4/bin:/sdss/ups/prd/dddebugger/v3_1_2/Linux/bin:/sdss/ups/prd/gnuplot/v3_5/Linux-2/bin:/sdss/ups/prd/gdb/v4_17/Linux-2/bin:/sdss/ups/prd/blt/v1_9/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin/:/data/des03.a/data/hlin/gemini/gmmps-V-0-22-REL/gmmps/bin:/data/des03.a/data/hlin/gemini/skycat-3.0/bin:/sdss/ups/prd/tiling/v3_30/Linux-2-4-2-3-2/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/target/v6_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdb/v4_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/basicSch/v4_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photoSch/v6_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ts/v6_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/data/dp50.c/data/spectro/fspeclog/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idl/v6_3/Linux/idl_6.3/bin:/sdss/ups/prd/idlutils/v5_3_0/Linux/bin:/sdss/ups/prd/spectro/v5_13/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v20_27/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Wed Apr 9 00:13:47 CDT 2008 ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 BASICSCH_DIR=/sdss/ups/prd/basicSch/v4_0/Linux-2-4-2-3-2 BLT_DIR=/sdss/ups/prd/blt/v1_9/Linux-2-4-2-3-2 DAS_ADMIN_DIR=/sdss/ups/prd/das_admin/v1_5_0/NULL DDDEBUGGER_DIR=/sdss/ups/prd/dddebugger/v3_1_2/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v20_27/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_7/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp50.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GCC_DIR=/sdss/ups/prd/gcc/v2_95_2/Linux-2-4 GDB_DIR=/sdss/ups/prd/gdb/v4_17/Linux-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 GNUPLOT_DIR=/sdss/ups/prd/gnuplot/v3_5/Linux-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v5_3_0/Linux IDL_DIR=/sdss/ups/prd/idl/v6_3/Linux/idl_6.3 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL OBJECTIVITY_DIR=/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTOSCH_DIR=/sdss/ups/prd/photoSch/v6_0/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v6_3/Linux SDB_DIR=/sdss/ups/prd/sdb/v4_0/Linux-2-4-2-3-2 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_13/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TARGET_DIR=/sdss/ups/prd/target/v6_0/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TILING_DIR=/sdss/ups/prd/tiling/v3_30/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TS_DIR=/sdss/ups/prd/ts/v6_4/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v72/NULL UPS_DIR=/sdss/ups/prd/ups/v4_7_3/Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Wed Apr 9 00:13:49 CDT 2008 Begin running plate --------------------------------------------------------------- Wed Apr 9 00:13:49 CDT 2008 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x961158c makePlates : beginning loop over plObs chain; makePlates : making 4 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk192/complete//plPlugMapT-1934.par makePlates : plateInfo struct for plate 2971 : (h2).mjd 54587 (h2).raCen 256.4931 (h2).decCen 37.15698 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 256.493 37.157 256.493 38.657 plMakePlateFromTile : mjd of obs : 54587.807390 Observed HA/dec of plate center, fiducial point (deg) : -0.002 37.139 -0.001 38.639 The rotation angle of the fid. point is 179.919823 plMakePlateFromTile : beginning loop over 1191 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk192/complete//plPlugMapT-1935.par makePlates : plateInfo struct for plate 2972 : (h2).mjd 54587 (h2).raCen 257.5788 (h2).decCen 35.55808 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 257.579 35.558 257.579 37.058 plMakePlateFromTile : mjd of obs : 54587.810402 Observed HA/dec of plate center, fiducial point (deg) : -0.002 35.542 -0.001 37.041 The rotation angle of the fid. point is 179.905008 plMakePlateFromTile : beginning loop over 1262 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk192/complete//plPlugMapT-1936.par makePlates : plateInfo struct for plate 2973 : (h2).mjd 54587 (h2).raCen 259.3075 (h2).decCen 33.39038 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 259.308 33.390 259.308 34.890 plMakePlateFromTile : mjd of obs : 54587.815196 Observed HA/dec of plate center, fiducial point (deg) : -0.002 33.376 -0.001 34.876 The rotation angle of the fid. point is 179.752698 plMakePlateFromTile : beginning loop over 1160 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk192/complete//plPlugMapT-1937.par makePlates : plateInfo struct for plate 2974 : (h2).mjd 54587 (h2).raCen 260.5555 (h2).decCen 31.11884 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 260.555 31.119 260.555 32.619 plMakePlateFromTile : mjd of obs : 54587.818660 Observed HA/dec of plate center, fiducial point (deg) : -0.002 31.106 -0.001 32.606 The rotation angle of the fid. point is 0.018241 plMakePlateFromTile : beginning loop over 1108 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Apr 9 00:14:00 CDT 2008 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 4 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.04.5/plPlugMapP-2971.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 91 2 13 70 3 7 63 4 2 56 5 19 117 6 20 108 7 9 60 8 7 39 9 14 92 10 23 99 11 22 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6161 40 5 79 239 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 129 224 plFiberPlate : adding spectro-photo std with objId = 6161 40 2 85 169 plFiberPlate : adding spectro-photo std with objId = 2207 40 5 129 163 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 118 32 plFiberPlate : adding spectro-photo std with objId = 2207 40 5 123 244 plFiberPlate : adding spectro-photo std with objId = 2207 40 2 121 23 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 124 169 plFiberPlate : 30 possible sky positions to use as objects from a possible 435. plFiberPlate : 18 possible sky positions to use as objects from a possible 434. plFiberPlate : 11 possible sky positions to use as objects from a possible 433. plFiberPlate : 14 possible sky positions to use as objects from a possible 432. plFiberPlate : 6 possible sky positions to use as objects from a possible 431. plFiberPlate : 23 possible sky positions to use as objects from a possible 430. plFiberPlate : 42 possible sky positions to use as objects from a possible 429. plFiberPlate : 19 possible sky positions to use as objects from a possible 428. plFiberPlate : 17 possible sky positions to use as objects from a possible 427. plFiberPlate : 13 possible sky positions to use as objects from a possible 426. plFiberPlate : 6 possible sky positions to use as objects from a possible 425. plFiberPlate : 1 possible sky positions to use as objects from a possible 424. plFiberPlate : 3 possible sky positions to use as objects from a possible 423. plFiberPlate : 18 possible sky positions to use as objects from a possible 422. plFiberPlate : 19 possible sky positions to use as objects from a possible 421. plFiberPlate : 34 possible sky positions to use as objects from a possible 420. plFiberPlate : 17 possible sky positions to use as objects from a possible 419. plFiberPlate : 12 possible sky positions to use as objects from a possible 418. plFiberPlate : 11 possible sky positions to use as objects from a possible 417. plFiberPlate : 5 possible sky positions to use as objects from a possible 416. plFiberPlate : 3 possible sky positions to use as objects from a possible 415. plFiberPlate : 1 possible sky positions to use as objects from a possible 414. plFiberPlate : 11 possible sky positions to use as objects from a possible 413. plFiberPlate : 10 possible sky positions to use as objects from a possible 412. plFiberPlate : 8 possible sky positions to use as objects from a possible 411. plFiberPlate : 58 possible sky positions to use as objects from a possible 410. plFiberPlate : 22 possible sky positions to use as objects from a possible 409. plFiberPlate : 8 possible sky positions to use as objects from a possible 408. plFiberPlate : 7 possible sky positions to use as objects from a possible 407. plFiberPlate : 19 possible sky positions to use as objects from a possible 406. plFiberPlate : 6 possible sky positions to use as objects from a possible 405. plFiberPlate : 13 possible sky positions to use as objects from a possible 404. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2971.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2971.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.04.5/plPlugMapP-2972.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 93 2 23 82 3 20 85 4 27 104 5 26 98 6 16 81 7 8 53 8 6 35 9 18 95 10 35 116 11 30 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 144 138 plFiberPlate : adding spectro-photo std with objId = 6161 40 2 85 169 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 133 26 plFiberPlate : adding spectro-photo std with objId = 2207 40 5 129 163 plFiberPlate : adding spectro-photo std with objId = 6161 40 4 94 89 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 134 98 plFiberPlate : adding spectro-photo std with objId = 6161 40 2 91 88 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 143 254 plFiberPlate : 111 possible sky positions to use as objects from a possible 460. plFiberPlate : 9 possible sky positions to use as objects from a possible 459. plFiberPlate : 3 possible sky positions to use as objects from a possible 458. plFiberPlate : 3 possible sky positions to use as objects from a possible 457. plFiberPlate : 4 possible sky positions to use as objects from a possible 456. plFiberPlate : 10 possible sky positions to use as objects from a possible 455. plFiberPlate : 81 possible sky positions to use as objects from a possible 454. plFiberPlate : 40 possible sky positions to use as objects from a possible 453. plFiberPlate : 22 possible sky positions to use as objects from a possible 452. plFiberPlate : 13 possible sky positions to use as objects from a possible 451. plFiberPlate : 4 possible sky positions to use as objects from a possible 450. plFiberPlate : 13 possible sky positions to use as objects from a possible 449. plFiberPlate : 5 possible sky positions to use as objects from a possible 448. plFiberPlate : 11 possible sky positions to use as objects from a possible 447. plFiberPlate : 10 possible sky positions to use as objects from a possible 446. plFiberPlate : 10 possible sky positions to use as objects from a possible 445. plFiberPlate : 62 possible sky positions to use as objects from a possible 444. plFiberPlate : 24 possible sky positions to use as objects from a possible 443. plFiberPlate : 34 possible sky positions to use as objects from a possible 442. plFiberPlate : 23 possible sky positions to use as objects from a possible 441. plFiberPlate : 9 possible sky positions to use as objects from a possible 440. plFiberPlate : 8 possible sky positions to use as objects from a possible 439. plFiberPlate : 3 possible sky positions to use as objects from a possible 438. plFiberPlate : 7 possible sky positions to use as objects from a possible 437. plFiberPlate : 12 possible sky positions to use as objects from a possible 436. plFiberPlate : 30 possible sky positions to use as objects from a possible 435. plFiberPlate : 36 possible sky positions to use as objects from a possible 434. plFiberPlate : 23 possible sky positions to use as objects from a possible 433. plFiberPlate : 31 possible sky positions to use as objects from a possible 432. plFiberPlate : 26 possible sky positions to use as objects from a possible 431. plFiberPlate : 31 possible sky positions to use as objects from a possible 430. plFiberPlate : 7 possible sky positions to use as objects from a possible 429. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2971.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2972.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2972.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.04.5/plPlugMapP-2973.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 55 2 17 72 3 12 81 4 20 98 5 26 88 6 19 64 7 3 20 8 2 10 9 16 71 10 29 116 11 18 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 145 309 plFiberPlate : adding spectro-photo std with objId = 2207 40 2 158 241 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 153 396 plFiberPlate : adding spectro-photo std with objId = 6161 40 2 106 223 plFiberPlate : adding spectro-photo std with objId = 6161 40 3 104 46 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 159 244 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 143 254 plFiberPlate : adding spectro-photo std with objId = 6161 40 4 110 231 plFiberPlate : 51 possible sky positions to use as objects from a possible 357. plFiberPlate : 26 possible sky positions to use as objects from a possible 356. plFiberPlate : 17 possible sky positions to use as objects from a possible 355. plFiberPlate : 3 possible sky positions to use as objects from a possible 354. plFiberPlate : 5 possible sky positions to use as objects from a possible 353. plFiberPlate : 18 possible sky positions to use as objects from a possible 352. plFiberPlate : 25 possible sky positions to use as objects from a possible 351. plFiberPlate : 41 possible sky positions to use as objects from a possible 350. plFiberPlate : 24 possible sky positions to use as objects from a possible 349. plFiberPlate : 22 possible sky positions to use as objects from a possible 348. plFiberPlate : 18 possible sky positions to use as objects from a possible 347. plFiberPlate : 12 possible sky positions to use as objects from a possible 346. plFiberPlate : 4 possible sky positions to use as objects from a possible 345. plFiberPlate : 4 possible sky positions to use as objects from a possible 344. plFiberPlate : 3 possible sky positions to use as objects from a possible 343. plFiberPlate : 6 possible sky positions to use as objects from a possible 342. plFiberPlate : 33 possible sky positions to use as objects from a possible 341. plFiberPlate : 31 possible sky positions to use as objects from a possible 340. plFiberPlate : 42 possible sky positions to use as objects from a possible 339. plFiberPlate : 28 possible sky positions to use as objects from a possible 338. plFiberPlate : 23 possible sky positions to use as objects from a possible 337. plFiberPlate : 12 possible sky positions to use as objects from a possible 336. plFiberPlate : 6 possible sky positions to use as objects from a possible 335. plFiberPlate : 9 possible sky positions to use as objects from a possible 334. plFiberPlate : 4 possible sky positions to use as objects from a possible 333. plFiberPlate : 30 possible sky positions to use as objects from a possible 332. plFiberPlate : 34 possible sky positions to use as objects from a possible 331. plFiberPlate : 24 possible sky positions to use as objects from a possible 330. plFiberPlate : 20 possible sky positions to use as objects from a possible 329. plFiberPlate : 12 possible sky positions to use as objects from a possible 328. plFiberPlate : 8 possible sky positions to use as objects from a possible 327. plFiberPlate : 6 possible sky positions to use as objects from a possible 326. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2972.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2973.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2973.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.04.5/plPlugMapP-2974.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 57 2 14 59 3 11 73 4 18 106 5 26 85 6 12 54 7 1 20 8 4 9 9 14 57 10 31 96 11 16 70 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2207 40 5 168 381 plFiberPlate : adding spectro-photo std with objId = 6161 40 4 122 20 plFiberPlate : adding spectro-photo std with objId = 6161 40 3 119 114 plFiberPlate : adding spectro-photo std with objId = 6161 40 2 126 245 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 159 244 plFiberPlate : adding spectro-photo std with objId = 6161 40 4 132 249 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 176 274 plFiberPlate : adding spectro-photo std with objId = 6161 40 4 128 196 plFiberPlate : 90 possible sky positions to use as objects from a possible 327. plFiberPlate : 10 possible sky positions to use as objects from a possible 326. plFiberPlate : 9 possible sky positions to use as objects from a possible 325. plFiberPlate : 14 possible sky positions to use as objects from a possible 324. plFiberPlate : 17 possible sky positions to use as objects from a possible 323. plFiberPlate : 11 possible sky positions to use as objects from a possible 322. plFiberPlate : 15 possible sky positions to use as objects from a possible 321. plFiberPlate : 18 possible sky positions to use as objects from a possible 320. plFiberPlate : 12 possible sky positions to use as objects from a possible 319. plFiberPlate : 6 possible sky positions to use as objects from a possible 318. plFiberPlate : 3 possible sky positions to use as objects from a possible 317. plFiberPlate : 0 possible sky positions to use as objects from a possible 316. plFiberPlate: No sky found for bundle at 5.281 -72.763, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 316. plFiberPlate : 4 possible sky positions to use as objects from a possible 315. plFiberPlate : 7 possible sky positions to use as objects from a possible 314. plFiberPlate : 5 possible sky positions to use as objects from a possible 313. plFiberPlate : 21 possible sky positions to use as objects from a possible 312. plFiberPlate : 55 possible sky positions to use as objects from a possible 311. plFiberPlate : 34 possible sky positions to use as objects from a possible 310. plFiberPlate : 25 possible sky positions to use as objects from a possible 309. plFiberPlate : 23 possible sky positions to use as objects from a possible 308. plFiberPlate : 14 possible sky positions to use as objects from a possible 307. plFiberPlate : 8 possible sky positions to use as objects from a possible 306. plFiberPlate : 12 possible sky positions to use as objects from a possible 305. plFiberPlate : 6 possible sky positions to use as objects from a possible 304. plFiberPlate : 5 possible sky positions to use as objects from a possible 303. plFiberPlate : 16 possible sky positions to use as objects from a possible 302. plFiberPlate : 19 possible sky positions to use as objects from a possible 301. plFiberPlate : 14 possible sky positions to use as objects from a possible 300. plFiberPlate : 13 possible sky positions to use as objects from a possible 299. plFiberPlate : 9 possible sky positions to use as objects from a possible 298. plFiberPlate : 5 possible sky positions to use as objects from a possible 297. plFiberPlate : 4 possible sky positions to use as objects from a possible 296. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2973.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2974.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.04.5/plOverlay-2974.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Apr 9 00:14:10 CDT 2008 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 4 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2971.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2971.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2971.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2972.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2972.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2972.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2973.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2973.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2973.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2974.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2974.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.04.5/plFanuc-2974.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Apr 9 00:14:24 CDT 2008 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x9789bac makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 4 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2971 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2972 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2973 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2974 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Apr 9 00:14:32 CDT 2008 Begin running "plateEnder dr2008.04.5 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v20_27/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v20_27/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2008.04.5 -morePipes 1" failed. PS: Read file for stderr output of this job.