Sender: LSF System Subject: Job 35920: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Oct 25 15:22:03 2001 Results reported at Thu Oct 25 15:25:47 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_28 -f NULL -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.11.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 197.22 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Oct 25 15:22:05 CDT 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Oct 25 15:22:07 CDT 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/ktools/v1_4/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_5_3OSF1-V4/bin:/home/s1/jen_a/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5/bin:/p/OSF1/photo/v5_3_4/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/GENERIC_UNIX/dp/v11_28/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_11/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_1/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Thu Oct 25 15:22:07 CDT 2001 ASTROM_DIR=/p/OSF1/astrom/v3_5 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 DERVISH_DIR=/p/OSF1/dervish/v8_1 DP_DIR=/p/GENERIC_UNIX/dp/v11_28 DUST_DIR=/p/IRIX6/dust/v1_0 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INFO_DIR=/fnal/ups/prd/Info/v1_6 INT_DIR=/p/OSF1/dervish/v8_1/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_2 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_3_4 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_11 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_5_3OSF1-V4 --------------------------------------------------------------- Thu Oct 25 15:22:07 CDT 2001 Begin running plate --------------------------------------------------------------- Thu Oct 25 15:22:07 CDT 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_28/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_28 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e07568 makePlates : beginning loop over plObs chain; makePlates : making 16 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0540.par makePlates : plateInfo struct for plate 754 : (h2).mjd 52230 (h2).raCen 114.2979 (h2).decCen 29.61157 (h2).haCen -39 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 114.298 29.612 114.298 31.112 plMakePlateFromTile : mjd of obs : 52230.757298 Observed HA/dec of plate center, fiducial point (deg) : -39.002 29.610 -39.003 31.109 The rotation angle of the fid. point is 74.391457 plMakePlateFromTile : beginning loop over 995 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0541.par makePlates : plateInfo struct for plate 755 : (h2).mjd 52230 (h2).raCen 115.9452 (h2).decCen 32.04597 (h2).haCen -40 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 115.945 32.046 115.945 33.546 plMakePlateFromTile : mjd of obs : 52230.759090 Observed HA/dec of plate center, fiducial point (deg) : -40.002 32.043 -40.002 33.543 The rotation angle of the fid. point is 77.767117 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0542.par makePlates : plateInfo struct for plate 756 : (h2).mjd 52230 (h2).raCen 118.1761 (h2).decCen 33.99719 (h2).haCen -28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.176 33.997 118.176 35.497 plMakePlateFromTile : mjd of obs : 52230.798524 Observed HA/dec of plate center, fiducial point (deg) : -28.002 33.992 -28.003 35.492 The rotation angle of the fid. point is 85.101902 plMakePlateFromTile : beginning loop over 1224 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0543.par makePlates : plateInfo struct for plate 757 : (h2).mjd 52230 (h2).raCen 119.5592 (h2).decCen 36.23368 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.559 36.234 119.559 37.734 plMakePlateFromTile : mjd of obs : 52230.799585 Observed HA/dec of plate center, fiducial point (deg) : -29.002 36.228 -29.003 37.727 The rotation angle of the fid. point is 89.700711 plMakePlateFromTile : beginning loop over 1334 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0544.par makePlates : plateInfo struct for plate 758 : (h2).mjd 52230 (h2).raCen 121.3279 (h2).decCen 37.80131 (h2).haCen -31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.328 37.801 121.328 39.301 plMakePlateFromTile : mjd of obs : 52230.798942 Observed HA/dec of plate center, fiducial point (deg) : -31.002 37.795 -31.003 39.294 The rotation angle of the fid. point is 91.831010 plMakePlateFromTile : beginning loop over 1305 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0545.par makePlates : plateInfo struct for plate 759 : (h2).mjd 52230 (h2).raCen 123.1192 (h2).decCen 39.24276 (h2).haCen -33 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.119 39.243 123.119 40.743 plMakePlateFromTile : mjd of obs : 52230.798361 Observed HA/dec of plate center, fiducial point (deg) : -33.002 39.235 -33.002 40.735 The rotation angle of the fid. point is 93.331650 plMakePlateFromTile : beginning loop over 1255 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0546.par makePlates : plateInfo struct for plate 760 : (h2).mjd 52230 (h2).raCen 124.6188 (h2).decCen 40.78758 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.619 40.788 124.619 42.288 plMakePlateFromTile : mjd of obs : 52230.841312 Observed HA/dec of plate center, fiducial point (deg) : -19.002 40.778 -19.003 42.278 The rotation angle of the fid. point is 111.757876 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0547.par makePlates : plateInfo struct for plate 761 : (h2).mjd 52230 (h2).raCen 126.5953 (h2).decCen 42.11765 (h2).haCen -21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 126.595 42.118 126.595 43.618 plMakePlateFromTile : mjd of obs : 52230.841244 Observed HA/dec of plate center, fiducial point (deg) : -21.002 42.108 -21.003 43.607 The rotation angle of the fid. point is 112.476038 plMakePlateFromTile : beginning loop over 1300 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0548.par makePlates : plateInfo struct for plate 762 : (h2).mjd 52230 (h2).raCen 128.8309 (h2).decCen 44.04415 (h2).haCen -23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.831 44.044 128.831 45.544 plMakePlateFromTile : mjd of obs : 52230.841894 Observed HA/dec of plate center, fiducial point (deg) : -23.002 44.033 -23.002 45.533 The rotation angle of the fid. point is 114.354175 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0549.par makePlates : plateInfo struct for plate 763 : (h2).mjd 52230 (h2).raCen 131.4754 (h2).decCen 45.66854 (h2).haCen -11 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.475 45.669 131.475 47.169 plMakePlateFromTile : mjd of obs : 52230.882474 Observed HA/dec of plate center, fiducial point (deg) : -11.002 45.656 -11.003 47.156 The rotation angle of the fid. point is 142.859945 plMakePlateFromTile : beginning loop over 1253 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0550.par makePlates : plateInfo struct for plate 764 : (h2).mjd 52230 (h2).raCen 134.2985 (h2).decCen 47.50635 (h2).haCen -14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.298 47.506 134.298 49.006 plMakePlateFromTile : mjd of obs : 52230.881979 Observed HA/dec of plate center, fiducial point (deg) : -14.002 47.493 -14.003 48.993 The rotation angle of the fid. point is 139.192408 plMakePlateFromTile : beginning loop over 1246 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0551.par makePlates : plateInfo struct for plate 765 : (h2).mjd 52230 (h2).raCen 136.6288 (h2).decCen 49.26799 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.629 49.268 136.629 50.768 plMakePlateFromTile : mjd of obs : 52230.882891 Observed HA/dec of plate center, fiducial point (deg) : -16.002 49.254 -16.002 50.753 The rotation angle of the fid. point is 138.168195 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0552.par makePlates : plateInfo struct for plate 766 : (h2).mjd 52230 (h2).raCen 139.1844 (h2).decCen 50.41041 (h2).haCen -34 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.184 50.410 139.184 51.910 plMakePlateFromTile : mjd of obs : 52230.840084 Observed HA/dec of plate center, fiducial point (deg) : -34.002 50.397 -34.002 51.896 The rotation angle of the fid. point is 112.198352 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0553.par makePlates : plateInfo struct for plate 767 : (h2).mjd 52230 (h2).raCen 141.9972 (h2).decCen 51.77363 (h2).haCen -36 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.997 51.774 141.997 53.274 plMakePlateFromTile : mjd of obs : 52230.842330 Observed HA/dec of plate center, fiducial point (deg) : -36.002 51.759 -36.002 53.259 The rotation angle of the fid. point is 111.937203 plMakePlateFromTile : beginning loop over 1296 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0554.par makePlates : plateInfo struct for plate 768 : (h2).mjd 52230 (h2).raCen 144.6188 (h2).decCen 52.94863 (h2).haCen -39 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.619 52.949 144.619 54.449 plMakePlateFromTile : mjd of obs : 52230.841275 Observed HA/dec of plate center, fiducial point (deg) : -39.002 52.934 -39.002 54.433 The rotation angle of the fid. point is 110.224340 plMakePlateFromTile : beginning loop over 1358 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk25/complete//plPlugMapT-0555.par makePlates : plateInfo struct for plate 769 : (h2).mjd 52230 (h2).raCen 147.7096 (h2).decCen 54.06046 (h2).haCen -42 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.710 54.060 147.710 55.560 plMakePlateFromTile : mjd of obs : 52230.841519 Observed HA/dec of plate center, fiducial point (deg) : -42.002 54.046 -42.002 55.545 The rotation angle of the fid. point is 108.454171 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Oct 25 15:22:51 CDT 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_28/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_28 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 16 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0754.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 142 to list of science objects plFiberPlate : adding sky number 251 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 184 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 129 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 21 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 71 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 250 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 193 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 192 to list of science objects plFiberPlate : adding sky number 195 to list of science objects plFiberPlate : adding sky number 204 to list of science objects plFiberPlate : adding sky number 37 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : adding sky number 77 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 223 to list of science objects plFiberPlate : adding sky number 126 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 146 to list of science objects plFiberPlate : adding sky number 188 to list of science objects plFiberPlate : adding sky number 222 to list of science objects plFiberPlate : adding sky number 207 to list of science objects plFiberPlate : adding sky number 205 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 13 2 8 14 3 23 53 4 30 66 5 11 31 6 11 32 7 29 56 8 28 45 9 37 74 10 34 74 11 15 28 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2131 0 4 43 14 plFiberPlate : adding spectro-photo std with objId = 2131 0 5 46 101 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 83 142 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 75 135 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 36 197 plFiberPlate : adding spectro-photo std with objId = 2131 0 4 53 44 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 66 128 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 48 105 plFiberPlate : 77 possible sky positions to use as objects from a possible 234. plFiberPlate : 66 possible sky positions to use as objects from a possible 233. plFiberPlate : 60 possible sky positions to use as objects from a possible 232. plFiberPlate : 51 possible sky positions to use as objects from a possible 231. plFiberPlate : 35 possible sky positions to use as objects from a possible 230. plFiberPlate : 20 possible sky positions to use as objects from a possible 229. plFiberPlate : 14 possible sky positions to use as objects from a possible 228. plFiberPlate : 42 possible sky positions to use as objects from a possible 227. plFiberPlate : 35 possible sky positions to use as objects from a possible 226. plFiberPlate : 24 possible sky positions to use as objects from a possible 225. plFiberPlate : 17 possible sky positions to use as objects from a possible 224. plFiberPlate : 7 possible sky positions to use as objects from a possible 223. plFiberPlate : 4 possible sky positions to use as objects from a possible 222. plFiberPlate : 4 possible sky positions to use as objects from a possible 221. plFiberPlate : 3 possible sky positions to use as objects from a possible 220. plFiberPlate : 6 possible sky positions to use as objects from a possible 219. plFiberPlate : 28 possible sky positions to use as objects from a possible 218. plFiberPlate : 20 possible sky positions to use as objects from a possible 217. plFiberPlate : 11 possible sky positions to use as objects from a possible 216. plFiberPlate : 6 possible sky positions to use as objects from a possible 215. plFiberPlate : 7 possible sky positions to use as objects from a possible 214. plFiberPlate : 3 possible sky positions to use as objects from a possible 213. plFiberPlate : 12 possible sky positions to use as objects from a possible 212. plFiberPlate : 6 possible sky positions to use as objects from a possible 211. plFiberPlate : 6 possible sky positions to use as objects from a possible 210. plFiberPlate : 8 possible sky positions to use as objects from a possible 209. plFiberPlate : 16 possible sky positions to use as objects from a possible 208. plFiberPlate : 8 possible sky positions to use as objects from a possible 207. plFiberPlate : 4 possible sky positions to use as objects from a possible 206. plFiberPlate : 4 possible sky positions to use as objects from a possible 205. plFiberPlate : 6 possible sky positions to use as objects from a possible 204. plFiberPlate : 4 possible sky positions to use as objects from a possible 203. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0754.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0754.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0755.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 47 2 19 53 3 25 70 4 26 79 5 58 132 6 33 104 7 29 76 8 40 83 9 35 97 10 47 118 11 25 65 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 83 142 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 68 58 plFiberPlate : adding spectro-photo std with objId = 2131 0 5 70 94 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 95 54 plFiberPlate : adding spectro-photo std with objId = 2131 0 4 61 66 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 89 57 plFiberPlate : adding spectro-photo std with objId = 2131 0 5 62 98 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 73 114 plFiberPlate : 82 possible sky positions to use as objects from a possible 467. plFiberPlate : 70 possible sky positions to use as objects from a possible 466. plFiberPlate : 61 possible sky positions to use as objects from a possible 465. plFiberPlate : 48 possible sky positions to use as objects from a possible 464. plFiberPlate : 28 possible sky positions to use as objects from a possible 463. plFiberPlate : 17 possible sky positions to use as objects from a possible 462. plFiberPlate : 30 possible sky positions to use as objects from a possible 461. plFiberPlate : 65 possible sky positions to use as objects from a possible 460. plFiberPlate : 42 possible sky positions to use as objects from a possible 459. plFiberPlate : 34 possible sky positions to use as objects from a possible 458. plFiberPlate : 23 possible sky positions to use as objects from a possible 457. plFiberPlate : 18 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 7 possible sky positions to use as objects from a possible 454. plFiberPlate : 13 possible sky positions to use as objects from a possible 453. plFiberPlate : 15 possible sky positions to use as objects from a possible 452. plFiberPlate : 72 possible sky positions to use as objects from a possible 451. plFiberPlate : 31 possible sky positions to use as objects from a possible 450. plFiberPlate : 14 possible sky positions to use as objects from a possible 449. plFiberPlate : 9 possible sky positions to use as objects from a possible 448. plFiberPlate : 12 possible sky positions to use as objects from a possible 447. plFiberPlate : 5 possible sky positions to use as objects from a possible 446. plFiberPlate : 11 possible sky positions to use as objects from a possible 445. plFiberPlate : 8 possible sky positions to use as objects from a possible 444. plFiberPlate : 13 possible sky positions to use as objects from a possible 443. plFiberPlate : 66 possible sky positions to use as objects from a possible 442. plFiberPlate : 12 possible sky positions to use as objects from a possible 441. plFiberPlate : 3 possible sky positions to use as objects from a possible 440. plFiberPlate : 0 possible sky positions to use as objects from a possible 439. plFiberPlate: No sky found for bundle at 85.657 227.485, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 439. plFiberPlate: No sky found for bundle at 85.657 227.485, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 439. plFiberPlate: No sky found for bundle at 85.657 227.485, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 439. plFiberPlate : 4 possible sky positions to use as objects from a possible 438. plFiberPlate : 13 possible sky positions to use as objects from a possible 437. plFiberPlate : 20 possible sky positions to use as objects from a possible 436. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0754.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0755.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0755.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0756.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 19 2 5 19 3 26 74 4 36 104 5 34 119 6 27 102 7 36 75 8 31 58 9 30 95 10 42 106 11 12 35 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2131 0 2 84 31 plFiberPlate : adding spectro-photo std with objId = 2131 0 2 80 37 plFiberPlate : adding spectro-photo std with objId = 2131 0 2 90 25 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 109 120 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 116 102 plFiberPlate : adding spectro-photo std with objId = 2131 0 4 87 59 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 116 101 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 73 114 plFiberPlate : 93 possible sky positions to use as objects from a possible 421. plFiberPlate : 84 possible sky positions to use as objects from a possible 420. plFiberPlate : 66 possible sky positions to use as objects from a possible 419. plFiberPlate : 44 possible sky positions to use as objects from a possible 418. plFiberPlate : 25 possible sky positions to use as objects from a possible 417. plFiberPlate : 8 possible sky positions to use as objects from a possible 416. plFiberPlate : 17 possible sky positions to use as objects from a possible 415. plFiberPlate : 52 possible sky positions to use as objects from a possible 414. plFiberPlate : 47 possible sky positions to use as objects from a possible 413. plFiberPlate : 45 possible sky positions to use as objects from a possible 412. plFiberPlate : 39 possible sky positions to use as objects from a possible 411. plFiberPlate : 21 possible sky positions to use as objects from a possible 410. plFiberPlate : 13 possible sky positions to use as objects from a possible 409. plFiberPlate : 6 possible sky positions to use as objects from a possible 408. plFiberPlate : 9 possible sky positions to use as objects from a possible 407. plFiberPlate : 14 possible sky positions to use as objects from a possible 406. plFiberPlate : 56 possible sky positions to use as objects from a possible 405. plFiberPlate : 30 possible sky positions to use as objects from a possible 404. plFiberPlate : 9 possible sky positions to use as objects from a possible 403. plFiberPlate : 10 possible sky positions to use as objects from a possible 402. plFiberPlate : 6 possible sky positions to use as objects from a possible 401. plFiberPlate : 3 possible sky positions to use as objects from a possible 400. plFiberPlate : 5 possible sky positions to use as objects from a possible 399. plFiberPlate : 6 possible sky positions to use as objects from a possible 398. plFiberPlate : 11 possible sky positions to use as objects from a possible 397. plFiberPlate : 13 possible sky positions to use as objects from a possible 396. plFiberPlate : 15 possible sky positions to use as objects from a possible 395. plFiberPlate : 5 possible sky positions to use as objects from a possible 394. plFiberPlate : 6 possible sky positions to use as objects from a possible 393. plFiberPlate : 18 possible sky positions to use as objects from a possible 392. plFiberPlate : 11 possible sky positions to use as objects from a possible 391. plFiberPlate : 14 possible sky positions to use as objects from a possible 390. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0755.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0756.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0756.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0757.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 62 2 22 50 3 30 77 4 32 103 5 44 124 6 34 92 7 24 85 8 23 104 9 31 104 10 42 115 11 31 66 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2131 0 2 93 144 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 126 82 plFiberPlate : adding spectro-photo std with objId = 2131 0 5 93 113 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 128 136 plFiberPlate : adding spectro-photo std with objId = 2131 0 2 98 107 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 134 79 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 134 77 plFiberPlate : adding spectro-photo std with objId = 2131 0 5 96 72 plFiberPlate : 107 possible sky positions to use as objects from a possible 512. plFiberPlate : 62 possible sky positions to use as objects from a possible 511. plFiberPlate : 34 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 12 possible sky positions to use as objects from a possible 508. plFiberPlate : 12 possible sky positions to use as objects from a possible 507. plFiberPlate : 23 possible sky positions to use as objects from a possible 506. plFiberPlate : 78 possible sky positions to use as objects from a possible 505. plFiberPlate : 44 possible sky positions to use as objects from a possible 504. plFiberPlate : 28 possible sky positions to use as objects from a possible 503. plFiberPlate : 17 possible sky positions to use as objects from a possible 502. plFiberPlate : 5 possible sky positions to use as objects from a possible 501. plFiberPlate : 9 possible sky positions to use as objects from a possible 500. plFiberPlate : 6 possible sky positions to use as objects from a possible 499. plFiberPlate : 14 possible sky positions to use as objects from a possible 498. plFiberPlate : 19 possible sky positions to use as objects from a possible 497. plFiberPlate : 45 possible sky positions to use as objects from a possible 496. plFiberPlate : 18 possible sky positions to use as objects from a possible 495. plFiberPlate : 11 possible sky positions to use as objects from a possible 494. plFiberPlate : 10 possible sky positions to use as objects from a possible 493. plFiberPlate : 11 possible sky positions to use as objects from a possible 492. plFiberPlate : 5 possible sky positions to use as objects from a possible 491. plFiberPlate : 6 possible sky positions to use as objects from a possible 490. plFiberPlate : 7 possible sky positions to use as objects from a possible 489. plFiberPlate : 5 possible sky positions to use as objects from a possible 488. plFiberPlate : 61 possible sky positions to use as objects from a possible 487. plFiberPlate : 9 possible sky positions to use as objects from a possible 486. plFiberPlate : 22 possible sky positions to use as objects from a possible 485. plFiberPlate : 11 possible sky positions to use as objects from a possible 484. plFiberPlate : 9 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 18 possible sky positions to use as objects from a possible 481. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0756.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0757.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0757.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0758.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 66 2 12 60 3 22 73 4 31 91 5 34 126 6 30 115 7 13 92 8 21 105 9 19 100 10 27 129 11 15 76 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2131 0 5 119 80 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 138 100 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 150 8 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 142 32 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 134 79 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 112 26 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 116 97 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 134 77 plFiberPlate : 111 possible sky positions to use as objects from a possible 514. plFiberPlate : 71 possible sky positions to use as objects from a possible 513. plFiberPlate : 51 possible sky positions to use as objects from a possible 512. plFiberPlate : 34 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 13 possible sky positions to use as objects from a possible 509. plFiberPlate : 41 possible sky positions to use as objects from a possible 508. plFiberPlate : 61 possible sky positions to use as objects from a possible 507. plFiberPlate : 39 possible sky positions to use as objects from a possible 506. plFiberPlate : 17 possible sky positions to use as objects from a possible 505. plFiberPlate : 0 possible sky positions to use as objects from a possible 504. plFiberPlate: No sky found for bundle at -7.774 -64.422, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 504. plFiberPlate: No sky found for bundle at -7.774 -64.422, increase box by 20 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 504. plFiberPlate : 4 possible sky positions to use as objects from a possible 503. plFiberPlate : 3 possible sky positions to use as objects from a possible 502. plFiberPlate : 14 possible sky positions to use as objects from a possible 501. plFiberPlate : 13 possible sky positions to use as objects from a possible 500. plFiberPlate : 10 possible sky positions to use as objects from a possible 499. plFiberPlate : 42 possible sky positions to use as objects from a possible 498. plFiberPlate : 15 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : 6 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 13 possible sky positions to use as objects from a possible 491. plFiberPlate : 7 possible sky positions to use as objects from a possible 490. plFiberPlate : 90 possible sky positions to use as objects from a possible 489. plFiberPlate : 19 possible sky positions to use as objects from a possible 488. plFiberPlate : 15 possible sky positions to use as objects from a possible 487. plFiberPlate : 11 possible sky positions to use as objects from a possible 486. plFiberPlate : 1 possible sky positions to use as objects from a possible 485. plFiberPlate : 23 possible sky positions to use as objects from a possible 484. plFiberPlate : 13 possible sky positions to use as objects from a possible 483. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0757.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0758.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0758.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0759.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 48 2 8 42 3 16 87 4 18 101 5 30 105 6 28 90 7 16 84 8 28 89 9 23 99 10 30 121 11 12 65 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 53 118 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 122 80 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 156 54 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 161 117 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 160 102 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 128 19 plFiberPlate : adding spectro-photo std with objId = 2131 0 3 116 97 plFiberPlate : adding spectro-photo std with objId = 1889 1 2 112 72 plFiberPlate : 111 possible sky positions to use as objects from a possible 466. plFiberPlate : 79 possible sky positions to use as objects from a possible 465. plFiberPlate : 44 possible sky positions to use as objects from a possible 464. plFiberPlate : 16 possible sky positions to use as objects from a possible 463. plFiberPlate : 15 possible sky positions to use as objects from a possible 462. plFiberPlate : 13 possible sky positions to use as objects from a possible 461. plFiberPlate : 17 possible sky positions to use as objects from a possible 460. plFiberPlate : 55 possible sky positions to use as objects from a possible 459. plFiberPlate : 25 possible sky positions to use as objects from a possible 458. plFiberPlate : 22 possible sky positions to use as objects from a possible 457. plFiberPlate : 15 possible sky positions to use as objects from a possible 456. plFiberPlate : 8 possible sky positions to use as objects from a possible 455. plFiberPlate : 7 possible sky positions to use as objects from a possible 454. plFiberPlate : 12 possible sky positions to use as objects from a possible 453. plFiberPlate : 12 possible sky positions to use as objects from a possible 452. plFiberPlate : 6 possible sky positions to use as objects from a possible 451. plFiberPlate : 44 possible sky positions to use as objects from a possible 450. plFiberPlate : 23 possible sky positions to use as objects from a possible 449. plFiberPlate : 21 possible sky positions to use as objects from a possible 448. plFiberPlate : 12 possible sky positions to use as objects from a possible 447. plFiberPlate : 6 possible sky positions to use as objects from a possible 446. plFiberPlate : 7 possible sky positions to use as objects from a possible 445. plFiberPlate : 9 possible sky positions to use as objects from a possible 444. plFiberPlate : 20 possible sky positions to use as objects from a possible 443. plFiberPlate : 18 possible sky positions to use as objects from a possible 442. plFiberPlate : 60 possible sky positions to use as objects from a possible 441. plFiberPlate : 23 possible sky positions to use as objects from a possible 440. plFiberPlate : 14 possible sky positions to use as objects from a possible 439. plFiberPlate : 8 possible sky positions to use as objects from a possible 438. plFiberPlate : 13 possible sky positions to use as objects from a possible 437. plFiberPlate : 10 possible sky positions to use as objects from a possible 436. plFiberPlate : 20 possible sky positions to use as objects from a possible 435. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0758.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0759.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0759.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0760.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 72 2 12 66 3 24 98 4 30 108 5 25 130 6 18 99 7 26 82 8 26 107 9 16 85 10 30 142 11 19 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 57 10 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 68 48 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 71 30 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 65 41 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 161 117 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 160 102 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 61 60 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 64 23 plFiberPlate : 133 possible sky positions to use as objects from a possible 539. plFiberPlate : 87 possible sky positions to use as objects from a possible 538. plFiberPlate : 61 possible sky positions to use as objects from a possible 537. plFiberPlate : 33 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 30 possible sky positions to use as objects from a possible 533. plFiberPlate : 56 possible sky positions to use as objects from a possible 532. plFiberPlate : 42 possible sky positions to use as objects from a possible 531. plFiberPlate : 26 possible sky positions to use as objects from a possible 530. plFiberPlate : 12 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 10 possible sky positions to use as objects from a possible 527. plFiberPlate : 3 possible sky positions to use as objects from a possible 526. plFiberPlate : 15 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 38 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 14 possible sky positions to use as objects from a possible 521. plFiberPlate : 3 possible sky positions to use as objects from a possible 520. plFiberPlate : 7 possible sky positions to use as objects from a possible 519. plFiberPlate : 3 possible sky positions to use as objects from a possible 518. plFiberPlate : 5 possible sky positions to use as objects from a possible 517. plFiberPlate : 27 possible sky positions to use as objects from a possible 516. plFiberPlate : 15 possible sky positions to use as objects from a possible 515. plFiberPlate : 63 possible sky positions to use as objects from a possible 514. plFiberPlate : 18 possible sky positions to use as objects from a possible 513. plFiberPlate : 8 possible sky positions to use as objects from a possible 512. plFiberPlate : 17 possible sky positions to use as objects from a possible 511. plFiberPlate : 22 possible sky positions to use as objects from a possible 510. plFiberPlate : 10 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0759.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0760.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0760.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0761.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 49 2 7 42 3 17 83 4 28 95 5 35 128 6 26 115 7 24 105 8 27 101 9 24 107 10 38 122 11 17 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 179 27 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 180 68 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 68 48 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 71 30 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 77 74 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 81 6 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 81 51 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 178 94 plFiberPlate : 101 possible sky positions to use as objects from a possible 515. plFiberPlate : 95 possible sky positions to use as objects from a possible 514. plFiberPlate : 84 possible sky positions to use as objects from a possible 513. plFiberPlate : 36 possible sky positions to use as objects from a possible 512. plFiberPlate : 7 possible sky positions to use as objects from a possible 511. plFiberPlate : 17 possible sky positions to use as objects from a possible 510. plFiberPlate : 31 possible sky positions to use as objects from a possible 509. plFiberPlate : 63 possible sky positions to use as objects from a possible 508. plFiberPlate : 41 possible sky positions to use as objects from a possible 507. plFiberPlate : 9 possible sky positions to use as objects from a possible 506. plFiberPlate : 7 possible sky positions to use as objects from a possible 505. plFiberPlate : 8 possible sky positions to use as objects from a possible 504. plFiberPlate : 6 possible sky positions to use as objects from a possible 503. plFiberPlate : 14 possible sky positions to use as objects from a possible 502. plFiberPlate : 8 possible sky positions to use as objects from a possible 501. plFiberPlate : 10 possible sky positions to use as objects from a possible 500. plFiberPlate : 49 possible sky positions to use as objects from a possible 499. plFiberPlate : 26 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 6 possible sky positions to use as objects from a possible 496. plFiberPlate : 10 possible sky positions to use as objects from a possible 495. plFiberPlate : 11 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 13 possible sky positions to use as objects from a possible 492. plFiberPlate : 6 possible sky positions to use as objects from a possible 491. plFiberPlate : 75 possible sky positions to use as objects from a possible 490. plFiberPlate : 36 possible sky positions to use as objects from a possible 489. plFiberPlate : 23 possible sky positions to use as objects from a possible 488. plFiberPlate : 11 possible sky positions to use as objects from a possible 487. plFiberPlate : 4 possible sky positions to use as objects from a possible 486. plFiberPlate : 18 possible sky positions to use as objects from a possible 485. plFiberPlate : 20 possible sky positions to use as objects from a possible 484. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0760.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0761.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0761.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0762.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 70 2 12 47 3 19 105 4 21 120 5 22 115 6 16 101 7 15 94 8 20 100 9 16 99 10 30 139 11 20 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 85 10 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 91 23 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 86 15 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 101 12 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 202 46 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 93 39 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 85 12 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 194 32 plFiberPlate : 133 possible sky positions to use as objects from a possible 542. plFiberPlate : 64 possible sky positions to use as objects from a possible 541. plFiberPlate : 37 possible sky positions to use as objects from a possible 540. plFiberPlate : 14 possible sky positions to use as objects from a possible 539. plFiberPlate : 13 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 33 possible sky positions to use as objects from a possible 536. plFiberPlate : 56 possible sky positions to use as objects from a possible 535. plFiberPlate : 32 possible sky positions to use as objects from a possible 534. plFiberPlate : 20 possible sky positions to use as objects from a possible 533. plFiberPlate : 17 possible sky positions to use as objects from a possible 532. plFiberPlate : 5 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 17 possible sky positions to use as objects from a possible 528. plFiberPlate : 10 possible sky positions to use as objects from a possible 527. plFiberPlate : 26 possible sky positions to use as objects from a possible 526. plFiberPlate : 17 possible sky positions to use as objects from a possible 525. plFiberPlate : 8 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 1 possible sky positions to use as objects from a possible 521. plFiberPlate : 7 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 56 possible sky positions to use as objects from a possible 517. plFiberPlate : 23 possible sky positions to use as objects from a possible 516. plFiberPlate : 15 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 7 possible sky positions to use as objects from a possible 513. plFiberPlate : 15 possible sky positions to use as objects from a possible 512. plFiberPlate : 33 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0761.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0762.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0762.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0763.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 61 2 5 43 3 16 71 4 15 99 5 22 113 6 19 95 7 15 72 8 27 93 9 22 109 10 28 131 11 15 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 107 21 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 102 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 109 36 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 217 41 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 110 81 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 107 10 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 222 37 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 113 52 plFiberPlate : 108 possible sky positions to use as objects from a possible 496. plFiberPlate : 82 possible sky positions to use as objects from a possible 495. plFiberPlate : 71 possible sky positions to use as objects from a possible 494. plFiberPlate : 42 possible sky positions to use as objects from a possible 493. plFiberPlate : 14 possible sky positions to use as objects from a possible 492. plFiberPlate : 11 possible sky positions to use as objects from a possible 491. plFiberPlate : 41 possible sky positions to use as objects from a possible 490. plFiberPlate : 74 possible sky positions to use as objects from a possible 489. plFiberPlate : 66 possible sky positions to use as objects from a possible 488. plFiberPlate : 39 possible sky positions to use as objects from a possible 487. plFiberPlate : 31 possible sky positions to use as objects from a possible 486. plFiberPlate : 23 possible sky positions to use as objects from a possible 485. plFiberPlate : 18 possible sky positions to use as objects from a possible 484. plFiberPlate : 11 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 69 possible sky positions to use as objects from a possible 480. plFiberPlate : 52 possible sky positions to use as objects from a possible 479. plFiberPlate : 40 possible sky positions to use as objects from a possible 478. plFiberPlate : 23 possible sky positions to use as objects from a possible 477. plFiberPlate : 14 possible sky positions to use as objects from a possible 476. plFiberPlate : 8 possible sky positions to use as objects from a possible 475. plFiberPlate : 15 possible sky positions to use as objects from a possible 474. plFiberPlate : 21 possible sky positions to use as objects from a possible 473. plFiberPlate : 9 possible sky positions to use as objects from a possible 472. plFiberPlate : 35 possible sky positions to use as objects from a possible 471. plFiberPlate : 15 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 10 possible sky positions to use as objects from a possible 468. plFiberPlate : 7 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 8 possible sky positions to use as objects from a possible 465. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0762.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0763.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0763.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0764.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 66 2 8 42 3 13 88 4 16 114 5 19 104 6 12 69 7 18 85 8 26 98 9 22 102 10 21 141 11 15 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 238 41 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 123 64 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 135 25 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 222 37 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 134 10 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 229 14 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 228 58 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 130 6 plFiberPlate : 123 possible sky positions to use as objects from a possible 503. plFiberPlate : 95 possible sky positions to use as objects from a possible 502. plFiberPlate : 52 possible sky positions to use as objects from a possible 501. plFiberPlate : 22 possible sky positions to use as objects from a possible 500. plFiberPlate : 16 possible sky positions to use as objects from a possible 499. plFiberPlate : 22 possible sky positions to use as objects from a possible 498. plFiberPlate : 42 possible sky positions to use as objects from a possible 497. plFiberPlate : 71 possible sky positions to use as objects from a possible 496. plFiberPlate : 54 possible sky positions to use as objects from a possible 495. plFiberPlate : 49 possible sky positions to use as objects from a possible 494. plFiberPlate : 24 possible sky positions to use as objects from a possible 493. plFiberPlate : 6 possible sky positions to use as objects from a possible 492. plFiberPlate : 18 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 16 possible sky positions to use as objects from a possible 489. plFiberPlate : 5 possible sky positions to use as objects from a possible 488. plFiberPlate : 67 possible sky positions to use as objects from a possible 487. plFiberPlate : 44 possible sky positions to use as objects from a possible 486. plFiberPlate : 28 possible sky positions to use as objects from a possible 485. plFiberPlate : 14 possible sky positions to use as objects from a possible 484. plFiberPlate : 11 possible sky positions to use as objects from a possible 483. plFiberPlate : 7 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 23 possible sky positions to use as objects from a possible 480. plFiberPlate : 16 possible sky positions to use as objects from a possible 479. plFiberPlate : 23 possible sky positions to use as objects from a possible 478. plFiberPlate : 18 possible sky positions to use as objects from a possible 477. plFiberPlate : 8 possible sky positions to use as objects from a possible 476. plFiberPlate : 13 possible sky positions to use as objects from a possible 475. plFiberPlate : 12 possible sky positions to use as objects from a possible 474. plFiberPlate : 20 possible sky positions to use as objects from a possible 473. plFiberPlate : 13 possible sky positions to use as objects from a possible 472. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0763.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0764.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0764.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0765.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 90 2 10 73 3 18 86 4 17 109 5 21 124 6 26 101 7 25 94 8 22 111 9 23 99 10 18 137 11 12 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 135 25 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 136 30 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 245 41 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 256 63 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 245 39 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 141 56 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 150 12 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 244 32 plFiberPlate : 118 possible sky positions to use as objects from a possible 555. plFiberPlate : 77 possible sky positions to use as objects from a possible 554. plFiberPlate : 26 possible sky positions to use as objects from a possible 553. plFiberPlate : 23 possible sky positions to use as objects from a possible 552. plFiberPlate : 22 possible sky positions to use as objects from a possible 551. plFiberPlate : 35 possible sky positions to use as objects from a possible 550. plFiberPlate : 20 possible sky positions to use as objects from a possible 549. plFiberPlate : 74 possible sky positions to use as objects from a possible 548. plFiberPlate : 47 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 10 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : 12 possible sky positions to use as objects from a possible 540. plFiberPlate : 40 possible sky positions to use as objects from a possible 539. plFiberPlate : 38 possible sky positions to use as objects from a possible 538. plFiberPlate : 25 possible sky positions to use as objects from a possible 537. plFiberPlate : 11 possible sky positions to use as objects from a possible 536. plFiberPlate : 8 possible sky positions to use as objects from a possible 535. plFiberPlate : 1 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 13 possible sky positions to use as objects from a possible 532. plFiberPlate : 33 possible sky positions to use as objects from a possible 531. plFiberPlate : 37 possible sky positions to use as objects from a possible 530. plFiberPlate : 25 possible sky positions to use as objects from a possible 529. plFiberPlate : 11 possible sky positions to use as objects from a possible 528. plFiberPlate : 8 possible sky positions to use as objects from a possible 527. plFiberPlate : 22 possible sky positions to use as objects from a possible 526. plFiberPlate : 26 possible sky positions to use as objects from a possible 525. plFiberPlate : 18 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0764.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0765.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0765.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0766.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 83 2 16 55 3 16 80 4 16 102 5 17 132 6 17 108 7 12 84 8 19 107 9 17 116 10 34 139 11 20 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 254 16 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 158 35 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 152 33 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 266 10 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 258 25 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 256 63 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 150 12 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 157 35 plFiberPlate : 108 possible sky positions to use as objects from a possible 563. plFiberPlate : 101 possible sky positions to use as objects from a possible 562. plFiberPlate : 64 possible sky positions to use as objects from a possible 561. plFiberPlate : 29 possible sky positions to use as objects from a possible 560. plFiberPlate : 13 possible sky positions to use as objects from a possible 559. plFiberPlate : 19 possible sky positions to use as objects from a possible 558. plFiberPlate : 39 possible sky positions to use as objects from a possible 557. plFiberPlate : 73 possible sky positions to use as objects from a possible 556. plFiberPlate : 55 possible sky positions to use as objects from a possible 555. plFiberPlate : 31 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 9 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 16 possible sky positions to use as objects from a possible 548. plFiberPlate : 65 possible sky positions to use as objects from a possible 547. plFiberPlate : 48 possible sky positions to use as objects from a possible 546. plFiberPlate : 39 possible sky positions to use as objects from a possible 545. plFiberPlate : 24 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 5 possible sky positions to use as objects from a possible 542. plFiberPlate : 14 possible sky positions to use as objects from a possible 541. plFiberPlate : 12 possible sky positions to use as objects from a possible 540. plFiberPlate : 24 possible sky positions to use as objects from a possible 539. plFiberPlate : 70 possible sky positions to use as objects from a possible 538. plFiberPlate : 20 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 18 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 18 possible sky positions to use as objects from a possible 533. plFiberPlate : 31 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0765.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0766.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0766.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0767.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 82 2 8 67 3 10 83 4 16 104 5 20 124 6 17 101 7 24 96 8 22 115 9 21 108 10 21 134 11 16 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2137 0 3 282 29 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 271 16 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 278 37 plFiberPlate : adding spectro-photo std with objId = 2137 0 2 273 67 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 283 46 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 270 27 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 275 75 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 169 64 plFiberPlate : 118 possible sky positions to use as objects from a possible 556. plFiberPlate : 92 possible sky positions to use as objects from a possible 555. plFiberPlate : 51 possible sky positions to use as objects from a possible 554. plFiberPlate : 26 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 32 possible sky positions to use as objects from a possible 551. plFiberPlate : 39 possible sky positions to use as objects from a possible 550. plFiberPlate : 68 possible sky positions to use as objects from a possible 549. plFiberPlate : 55 possible sky positions to use as objects from a possible 548. plFiberPlate : 30 possible sky positions to use as objects from a possible 547. plFiberPlate : 11 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 10 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 17 possible sky positions to use as objects from a possible 541. plFiberPlate : 55 possible sky positions to use as objects from a possible 540. plFiberPlate : 49 possible sky positions to use as objects from a possible 539. plFiberPlate : 46 possible sky positions to use as objects from a possible 538. plFiberPlate : 39 possible sky positions to use as objects from a possible 537. plFiberPlate : 25 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 22 possible sky positions to use as objects from a possible 532. plFiberPlate : 46 possible sky positions to use as objects from a possible 531. plFiberPlate : 53 possible sky positions to use as objects from a possible 530. plFiberPlate : 30 possible sky positions to use as objects from a possible 529. plFiberPlate : 19 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : 31 possible sky positions to use as objects from a possible 526. plFiberPlate : 25 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0766.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0767.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0767.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0768.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 93 2 11 69 3 17 93 4 26 119 5 22 125 6 23 92 7 17 90 8 20 101 9 15 95 10 27 155 11 19 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 175 21 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 180 33 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 189 57 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 184 43 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 192 8 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 180 21 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 283 46 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 284 57 plFiberPlate : 126 possible sky positions to use as objects from a possible 585. plFiberPlate : 61 possible sky positions to use as objects from a possible 584. plFiberPlate : 27 possible sky positions to use as objects from a possible 583. plFiberPlate : 9 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 34 possible sky positions to use as objects from a possible 579. plFiberPlate : 72 possible sky positions to use as objects from a possible 578. plFiberPlate : 49 possible sky positions to use as objects from a possible 577. plFiberPlate : 22 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 10 possible sky positions to use as objects from a possible 574. plFiberPlate : 6 possible sky positions to use as objects from a possible 573. plFiberPlate : 18 possible sky positions to use as objects from a possible 572. plFiberPlate : 23 possible sky positions to use as objects from a possible 571. plFiberPlate : 4 possible sky positions to use as objects from a possible 570. plFiberPlate : 60 possible sky positions to use as objects from a possible 569. plFiberPlate : 42 possible sky positions to use as objects from a possible 568. plFiberPlate : 22 possible sky positions to use as objects from a possible 567. plFiberPlate : 11 possible sky positions to use as objects from a possible 566. plFiberPlate : 11 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 6 possible sky positions to use as objects from a possible 563. plFiberPlate : 11 possible sky positions to use as objects from a possible 562. plFiberPlate : 28 possible sky positions to use as objects from a possible 561. plFiberPlate : 44 possible sky positions to use as objects from a possible 560. plFiberPlate : 24 possible sky positions to use as objects from a possible 559. plFiberPlate : 12 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 11 possible sky positions to use as objects from a possible 555. plFiberPlate : 15 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0767.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0768.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0768.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.1/plPlugMapP-0769.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 104 2 10 68 3 15 88 4 22 115 5 21 118 6 23 86 7 12 63 8 8 68 9 14 91 10 19 138 11 20 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2137 0 4 304 42 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 197 34 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 200 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 192 8 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 300 41 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 199 18 plFiberPlate : adding spectro-photo std with objId = 2137 0 1 298 24 plFiberPlate : adding spectro-photo std with objId = 2137 0 5 309 20 plFiberPlate : 136 possible sky positions to use as objects from a possible 515. plFiberPlate : 63 possible sky positions to use as objects from a possible 514. plFiberPlate : 37 possible sky positions to use as objects from a possible 513. plFiberPlate : 27 possible sky positions to use as objects from a possible 512. plFiberPlate : 15 possible sky positions to use as objects from a possible 511. plFiberPlate : 29 possible sky positions to use as objects from a possible 510. plFiberPlate : 59 possible sky positions to use as objects from a possible 509. plFiberPlate : 77 possible sky positions to use as objects from a possible 508. plFiberPlate : 46 possible sky positions to use as objects from a possible 507. plFiberPlate : 24 possible sky positions to use as objects from a possible 506. plFiberPlate : 16 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 8 possible sky positions to use as objects from a possible 503. plFiberPlate : 12 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 13 possible sky positions to use as objects from a possible 500. plFiberPlate : 40 possible sky positions to use as objects from a possible 499. plFiberPlate : 20 possible sky positions to use as objects from a possible 498. plFiberPlate : 18 possible sky positions to use as objects from a possible 497. plFiberPlate : 11 possible sky positions to use as objects from a possible 496. plFiberPlate : 12 possible sky positions to use as objects from a possible 495. plFiberPlate : 6 possible sky positions to use as objects from a possible 494. plFiberPlate : 8 possible sky positions to use as objects from a possible 493. plFiberPlate : 18 possible sky positions to use as objects from a possible 492. plFiberPlate : 8 possible sky positions to use as objects from a possible 491. plFiberPlate : 51 possible sky positions to use as objects from a possible 490. plFiberPlate : 42 possible sky positions to use as objects from a possible 489. plFiberPlate : 15 possible sky positions to use as objects from a possible 488. plFiberPlate : 12 possible sky positions to use as objects from a possible 487. plFiberPlate : 6 possible sky positions to use as objects from a possible 486. plFiberPlate : 13 possible sky positions to use as objects from a possible 485. plFiberPlate : 5 possible sky positions to use as objects from a possible 484. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0768.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0769.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.1/plOverlay-0769.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Oct 25 15:23:36 CDT 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_28/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_28 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 16 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0754.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0754.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6732,10.7426) and (-3.76,11.60) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0754.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0755.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.4455,-11.0195) and (-4.92,-11.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0755.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0755.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0756.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0756.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0756.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0757.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.5137,11.8243) and (1.04,12.57) plMakeFanucCodes : fixed path between (-5.4258,-11.3783) and (-2.69,-12.14) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0757.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0757.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0758.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.3290,11.0380) and (4.73,11.75) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0758.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0758.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.1022,-6.5999) and (-1.57,-12.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0759.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0759.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0759.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0760.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.8612,12.1831) and (-1.99,12.60) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0760.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0760.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0761.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0761.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0761.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0762.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0762.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0762.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0763.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0763.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0763.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0764.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.1235,-8.6591) and (-10.82,-6.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0764.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0764.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0765.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1393,4.0541) and (12.36,2.50) plMakeFanucCodes : fixed path between (-12.2300,-3.3104) and (-12.74,-0.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0765.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.4145,10.1335) and (0.19,11.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0765.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0766.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.4276,8.6449) and (10.09,7.77) plMakeFanucCodes : fixed path between (-11.6797,-5.2356) and (-11.98,-4.40) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0766.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.9822,-10.2943) and (-0.72,-12.52) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0766.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0767.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0767.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0767.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0768.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0768.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0768.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0769.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6914,4.8406) and (-12.47,1.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0769.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.1/plFanuc-0769.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Oct 25 15:24:25 CDT 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_28/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_28 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e076e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 16 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 754 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 755 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 756 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 757 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 758 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 759 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 760 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 761 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 762 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 763 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 764 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 765 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 766 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 767 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 768 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 769 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Oct 25 15:24:48 CDT 2001 Begin running plateEnder dr2001.11.1 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_28/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_28 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2001.11.1 -morePipes 1 failed. PS: Read file for stderr output of this job.