Sender: LSF System Subject: Job 38709: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Nov 28 16:19:15 2001 Results reported at Wed Nov 28 16:22:39 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_37 -f NULL -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.11.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 158.14 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Nov 28 16:19:17 CST 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Nov 28 16:19:20 CST 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/ktools/v1_4/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/fnal/ups/prd/cmdscripts/v1_1/bin:/fnal/ups/prd/tcsh/OSF1/v6_09/bin:/p/OSF1/bash/v2_03/bin:/p/OSF1/cmdbin/v1_1/bin:/fnal/ups/prd/systools/v6_1/bin:/home/s1/jen_a/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5c/bin:/p/OSF1/photo/v5_2_26/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/GENERIC_UNIX/dp/v11_37/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_11/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_1/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Wed Nov 28 16:19:20 CST 2001 ASTROM_DIR=/p/OSF1/astrom/v3_5c ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 BASH_DIR=/p/OSF1/bash/v2_03 CMDBIN_DIR=/p/OSF1/cmdbin/v1_1 CMDSCRIPTS_DIR=/fnal/ups/prd/cmdscripts/v1_1 DERVISH_DIR=/p/OSF1/dervish/v8_1 DP_DIR=/p/GENERIC_UNIX/dp/v11_37 DUST_DIR=/p/IRIX6/dust/v1_0 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INFO_DIR=/fnal/ups/prd/Info/v1_6 INT_DIR=/p/OSF1/dervish/v8_1/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_2 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_26 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_11 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 SYSTOOLS_DIR=/fnal/ups/prd/systools/v6_1 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TCSH_DIR=/fnal/ups/prd/tcsh/OSF1/v6_09 TEMPLATE_HOME_DIR=/fnal/ups/prd/template_home/v1_3 TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Wed Nov 28 16:19:20 CST 2001 Begin running plate --------------------------------------------------------------- Wed Nov 28 16:19:20 CST 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e0f8e8 makePlates : beginning loop over plObs chain; makePlates : making 13 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0584.par makePlates : plateInfo struct for plate 812 : (h2).mjd 52384 (h2).raCen 238.4381 (h2).decCen 48.85581 (h2).haCen -13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 238.438 48.856 238.438 50.356 plMakePlateFromTile : mjd of obs : 52384.752733 Observed HA/dec of plate center, fiducial point (deg) : -13.002 48.842 -13.002 50.342 The rotation angle of the fid. point is 143.996851 plMakePlateFromTile : beginning loop over 1344 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0585.par makePlates : plateInfo struct for plate 813 : (h2).mjd 52384 (h2).raCen 241.0516 (h2).decCen 46.97566 (h2).haCen -1 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.052 46.976 241.052 48.476 plMakePlateFromTile : mjd of obs : 52384.793228 Observed HA/dec of plate center, fiducial point (deg) : -1.002 46.963 -1.002 48.462 The rotation angle of the fid. point is 176.554784 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0586.par makePlates : plateInfo struct for plate 814 : (h2).mjd 52384 (h2).raCen 243.5473 (h2).decCen 45.09886 (h2).haCen -3 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.547 45.099 243.547 46.599 plMakePlateFromTile : mjd of obs : 52384.794599 Observed HA/dec of plate center, fiducial point (deg) : -3.002 45.087 -3.002 46.586 The rotation angle of the fid. point is 168.273544 plMakePlateFromTile : beginning loop over 1282 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0587.par makePlates : plateInfo struct for plate 815 : (h2).mjd 52384 (h2).raCen 245.7543 (h2).decCen 43.08892 (h2).haCen -5 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 245.754 43.089 245.754 44.589 plMakePlateFromTile : mjd of obs : 52384.795171 Observed HA/dec of plate center, fiducial point (deg) : -5.002 43.078 -5.002 44.577 The rotation angle of the fid. point is 157.442354 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0588.par makePlates : plateInfo struct for plate 816 : (h2).mjd 52384 (h2).raCen 247.3696 (h2).decCen 41.64371 (h2).haCen 7 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 247.370 41.644 247.370 43.144 plMakePlateFromTile : mjd of obs : 52384.832900 Observed HA/dec of plate center, fiducial point (deg) : 6.998 41.633 6.998 43.133 The rotation angle of the fid. point is -145.634313 plMakePlateFromTile : beginning loop over 1246 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0589.par makePlates : plateInfo struct for plate 817 : (h2).mjd 52384 (h2).raCen 248.937 (h2).decCen 40.14654 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 248.937 40.147 248.937 41.647 plMakePlateFromTile : mjd of obs : 52384.834471 Observed HA/dec of plate center, fiducial point (deg) : 5.998 40.137 5.998 41.636 The rotation angle of the fid. point is -144.926069 plMakePlateFromTile : beginning loop over 1278 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0590.par makePlates : plateInfo struct for plate 818 : (h2).mjd 52384 (h2).raCen 250.8408 (h2).decCen 38.09971 (h2).haCen 4 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.841 38.100 250.841 39.600 plMakePlateFromTile : mjd of obs : 52384.834203 Observed HA/dec of plate center, fiducial point (deg) : 3.998 38.091 3.998 39.590 The rotation angle of the fid. point is -147.307513 plMakePlateFromTile : beginning loop over 1255 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0591.par makePlates : plateInfo struct for plate 819 : (h2).mjd 52384 (h2).raCen 252.6931 (h2).decCen 36.06607 (h2).haCen 17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 252.693 36.066 252.693 37.566 plMakePlateFromTile : mjd of obs : 52384.875358 Observed HA/dec of plate center, fiducial point (deg) : 16.998 36.058 16.998 37.558 The rotation angle of the fid. point is -98.241001 plMakePlateFromTile : beginning loop over 1156 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0583.par makePlates : plateInfo struct for plate 820 : (h2).mjd 52384 (h2).raCen 254.4319 (h2).decCen 36.28174 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.432 36.282 254.432 37.782 plMakePlateFromTile : mjd of obs : 52384.874632 Observed HA/dec of plate center, fiducial point (deg) : 14.998 36.274 14.998 37.773 The rotation angle of the fid. point is -101.440338 plMakePlateFromTile : beginning loop over 1014 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0592.par makePlates : plateInfo struct for plate 821 : (h2).mjd 52384 (h2).raCen 254.6167 (h2).decCen 33.80069 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.617 33.801 254.617 35.301 plMakePlateFromTile : mjd of obs : 52384.875145 Observed HA/dec of plate center, fiducial point (deg) : 14.998 33.794 14.998 35.293 The rotation angle of the fid. point is -90.472227 plMakePlateFromTile : beginning loop over 1047 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0593.par makePlates : plateInfo struct for plate 822 : (h2).mjd 52384 (h2).raCen 256.1911 (h2).decCen 31.87106 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 256.191 31.871 256.191 33.371 plMakePlateFromTile : mjd of obs : 52384.915530 Observed HA/dec of plate center, fiducial point (deg) : 27.998 31.866 27.998 33.365 The rotation angle of the fid. point is -80.244163 plMakePlateFromTile : beginning loop over 962 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0594.par makePlates : plateInfo struct for plate 823 : (h2).mjd 52384 (h2).raCen 257.8916 (h2).decCen 29.53414 (h2).haCen 27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 257.892 29.534 257.892 31.034 plMakePlateFromTile : mjd of obs : 52384.917470 Observed HA/dec of plate center, fiducial point (deg) : 26.998 29.530 26.998 31.029 The rotation angle of the fid. point is -75.064622 plMakePlateFromTile : beginning loop over 935 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk28/complete//plPlugMapT-0595.par makePlates : plateInfo struct for plate 824 : (h2).mjd 52384 (h2).raCen 259.5826 (h2).decCen 27.21642 (h2).haCen 25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 259.583 27.216 259.583 28.716 plMakePlateFromTile : mjd of obs : 52384.916613 Observed HA/dec of plate center, fiducial point (deg) : 24.998 27.213 24.998 28.712 The rotation angle of the fid. point is -69.480945 plMakePlateFromTile : beginning loop over 873 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Nov 28 16:19:57 CST 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 13 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0812.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 120 2 14 97 3 5 54 4 11 61 5 27 124 6 19 104 7 17 98 8 32 108 9 26 121 10 27 128 11 19 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2299 0 2 268 9 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 281 2 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 270 4 plFiberPlate : adding spectro-photo std with objId = 2299 0 3 266 17 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 273 48 plFiberPlate : adding spectro-photo std with objId = 2299 0 2 274 32 plFiberPlate : adding spectro-photo std with objId = 2299 0 4 261 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 287 39 plFiberPlate : 61 possible sky positions to use as objects from a possible 559. plFiberPlate : 32 possible sky positions to use as objects from a possible 558. plFiberPlate : 10 possible sky positions to use as objects from a possible 557. plFiberPlate : 21 possible sky positions to use as objects from a possible 556. plFiberPlate : 24 possible sky positions to use as objects from a possible 555. plFiberPlate : 23 possible sky positions to use as objects from a possible 554. plFiberPlate : 61 possible sky positions to use as objects from a possible 553. plFiberPlate : 54 possible sky positions to use as objects from a possible 552. plFiberPlate : 39 possible sky positions to use as objects from a possible 551. plFiberPlate : 28 possible sky positions to use as objects from a possible 550. plFiberPlate : 21 possible sky positions to use as objects from a possible 549. plFiberPlate : 10 possible sky positions to use as objects from a possible 548. plFiberPlate : 15 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 24 possible sky positions to use as objects from a possible 544. plFiberPlate : 69 possible sky positions to use as objects from a possible 543. plFiberPlate : 70 possible sky positions to use as objects from a possible 542. plFiberPlate : 53 possible sky positions to use as objects from a possible 541. plFiberPlate : 41 possible sky positions to use as objects from a possible 540. plFiberPlate : 21 possible sky positions to use as objects from a possible 539. plFiberPlate : 21 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 23 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 54 possible sky positions to use as objects from a possible 534. plFiberPlate : 43 possible sky positions to use as objects from a possible 533. plFiberPlate : 31 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 19 possible sky positions to use as objects from a possible 530. plFiberPlate : 7 possible sky positions to use as objects from a possible 529. plFiberPlate : 24 possible sky positions to use as objects from a possible 528. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0812.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0812.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0813.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 124 2 24 100 3 12 52 4 12 43 5 22 107 6 12 98 7 9 100 8 13 112 9 12 91 10 23 142 11 22 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 303 50 plFiberPlate : adding spectro-photo std with objId = 2326 0 5 290 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 299 33 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 292 14 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 292 37 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 289 21 plFiberPlate : adding spectro-photo std with objId = 2326 0 3 293 18 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 298 24 plFiberPlate : 51 possible sky positions to use as objects from a possible 515. plFiberPlate : 28 possible sky positions to use as objects from a possible 514. plFiberPlate : 35 possible sky positions to use as objects from a possible 513. plFiberPlate : 33 possible sky positions to use as objects from a possible 512. plFiberPlate : 42 possible sky positions to use as objects from a possible 511. plFiberPlate : 25 possible sky positions to use as objects from a possible 510. plFiberPlate : 37 possible sky positions to use as objects from a possible 509. plFiberPlate : 42 possible sky positions to use as objects from a possible 508. plFiberPlate : 34 possible sky positions to use as objects from a possible 507. plFiberPlate : 20 possible sky positions to use as objects from a possible 506. plFiberPlate : 12 possible sky positions to use as objects from a possible 505. plFiberPlate : 7 possible sky positions to use as objects from a possible 504. plFiberPlate : 23 possible sky positions to use as objects from a possible 503. plFiberPlate : 13 possible sky positions to use as objects from a possible 502. plFiberPlate : 12 possible sky positions to use as objects from a possible 501. plFiberPlate : 24 possible sky positions to use as objects from a possible 500. plFiberPlate : 31 possible sky positions to use as objects from a possible 499. plFiberPlate : 37 possible sky positions to use as objects from a possible 498. plFiberPlate : 21 possible sky positions to use as objects from a possible 497. plFiberPlate : 11 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : 2 possible sky positions to use as objects from a possible 494. plFiberPlate : 15 possible sky positions to use as objects from a possible 493. plFiberPlate : 17 possible sky positions to use as objects from a possible 492. plFiberPlate : 19 possible sky positions to use as objects from a possible 491. plFiberPlate : 49 possible sky positions to use as objects from a possible 490. plFiberPlate : 31 possible sky positions to use as objects from a possible 489. plFiberPlate : 17 possible sky positions to use as objects from a possible 488. plFiberPlate : 10 possible sky positions to use as objects from a possible 487. plFiberPlate : 11 possible sky positions to use as objects from a possible 486. plFiberPlate : 14 possible sky positions to use as objects from a possible 485. plFiberPlate : 35 possible sky positions to use as objects from a possible 484. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0812.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0813.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0813.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0814.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 126 2 10 92 3 7 48 4 12 53 5 28 119 6 16 90 7 21 80 8 26 105 9 19 94 10 23 137 11 15 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2326 0 4 303 50 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 14 2 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 15 57 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 17 19 plFiberPlate : adding spectro-photo std with objId = 2299 0 5 305 60 plFiberPlate : adding spectro-photo std with objId = 2326 0 2 307 8 plFiberPlate : adding spectro-photo std with objId = 2326 0 6 311 2 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 13 80 plFiberPlate : 50 possible sky positions to use as objects from a possible 510. plFiberPlate : 25 possible sky positions to use as objects from a possible 509. plFiberPlate : 20 possible sky positions to use as objects from a possible 508. plFiberPlate : 19 possible sky positions to use as objects from a possible 507. plFiberPlate : 17 possible sky positions to use as objects from a possible 506. plFiberPlate : 41 possible sky positions to use as objects from a possible 505. plFiberPlate : 32 possible sky positions to use as objects from a possible 504. plFiberPlate : 49 possible sky positions to use as objects from a possible 503. plFiberPlate : 33 possible sky positions to use as objects from a possible 502. plFiberPlate : 24 possible sky positions to use as objects from a possible 501. plFiberPlate : 16 possible sky positions to use as objects from a possible 500. plFiberPlate : 11 possible sky positions to use as objects from a possible 499. plFiberPlate : 19 possible sky positions to use as objects from a possible 498. plFiberPlate : 15 possible sky positions to use as objects from a possible 497. plFiberPlate : 5 possible sky positions to use as objects from a possible 496. plFiberPlate : 15 possible sky positions to use as objects from a possible 495. plFiberPlate : 45 possible sky positions to use as objects from a possible 494. plFiberPlate : 45 possible sky positions to use as objects from a possible 493. plFiberPlate : 28 possible sky positions to use as objects from a possible 492. plFiberPlate : 18 possible sky positions to use as objects from a possible 491. plFiberPlate : 9 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 23 possible sky positions to use as objects from a possible 488. plFiberPlate : 19 possible sky positions to use as objects from a possible 487. plFiberPlate : 15 possible sky positions to use as objects from a possible 486. plFiberPlate : 59 possible sky positions to use as objects from a possible 485. plFiberPlate : 43 possible sky positions to use as objects from a possible 484. plFiberPlate : 27 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 6 possible sky positions to use as objects from a possible 481. plFiberPlate : 5 possible sky positions to use as objects from a possible 480. plFiberPlate : 48 possible sky positions to use as objects from a possible 479. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0813.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0814.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0814.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0815.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 118 2 18 73 3 3 34 4 2 28 5 23 108 6 17 94 7 19 94 8 32 97 9 21 103 10 21 125 11 22 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 19 34 plFiberPlate : adding spectro-photo std with objId = 2299 0 3 310 94 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 33 56 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 28 99 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 34 10 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 26 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 6 31 43 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 28 69 plFiberPlate : 36 possible sky positions to use as objects from a possible 477. plFiberPlate : 38 possible sky positions to use as objects from a possible 476. plFiberPlate : 14 possible sky positions to use as objects from a possible 475. plFiberPlate : 25 possible sky positions to use as objects from a possible 474. plFiberPlate : 12 possible sky positions to use as objects from a possible 473. plFiberPlate : 36 possible sky positions to use as objects from a possible 472. plFiberPlate : 42 possible sky positions to use as objects from a possible 471. plFiberPlate : 18 possible sky positions to use as objects from a possible 470. plFiberPlate : 26 possible sky positions to use as objects from a possible 469. plFiberPlate : 25 possible sky positions to use as objects from a possible 468. plFiberPlate : 17 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 19 possible sky positions to use as objects from a possible 465. plFiberPlate : 14 possible sky positions to use as objects from a possible 464. plFiberPlate : 12 possible sky positions to use as objects from a possible 463. plFiberPlate : 17 possible sky positions to use as objects from a possible 462. plFiberPlate : 62 possible sky positions to use as objects from a possible 461. plFiberPlate : 46 possible sky positions to use as objects from a possible 460. plFiberPlate : 30 possible sky positions to use as objects from a possible 459. plFiberPlate : 18 possible sky positions to use as objects from a possible 458. plFiberPlate : 12 possible sky positions to use as objects from a possible 457. plFiberPlate : 13 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 4 possible sky positions to use as objects from a possible 454. plFiberPlate : 15 possible sky positions to use as objects from a possible 453. plFiberPlate : 53 possible sky positions to use as objects from a possible 452. plFiberPlate : 30 possible sky positions to use as objects from a possible 451. plFiberPlate : 16 possible sky positions to use as objects from a possible 450. plFiberPlate : 11 possible sky positions to use as objects from a possible 449. plFiberPlate : 10 possible sky positions to use as objects from a possible 448. plFiberPlate : 10 possible sky positions to use as objects from a possible 447. plFiberPlate : 23 possible sky positions to use as objects from a possible 446. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0814.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0815.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0815.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0816.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 116 2 17 78 3 7 28 4 10 34 5 20 112 6 22 99 7 17 91 8 16 113 9 18 97 10 18 93 11 19 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 42 10 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 47 66 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 47 5 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 33 27 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 33 56 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 34 10 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 39 103 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 41 38 plFiberPlate : 26 possible sky positions to use as objects from a possible 475. plFiberPlate : 15 possible sky positions to use as objects from a possible 474. plFiberPlate : 10 possible sky positions to use as objects from a possible 473. plFiberPlate : 12 possible sky positions to use as objects from a possible 472. plFiberPlate : 18 possible sky positions to use as objects from a possible 471. plFiberPlate : 26 possible sky positions to use as objects from a possible 470. plFiberPlate : 64 possible sky positions to use as objects from a possible 469. plFiberPlate : 26 possible sky positions to use as objects from a possible 468. plFiberPlate : 17 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 6 possible sky positions to use as objects from a possible 465. plFiberPlate : 4 possible sky positions to use as objects from a possible 464. plFiberPlate : 2 possible sky positions to use as objects from a possible 463. plFiberPlate : 15 possible sky positions to use as objects from a possible 462. plFiberPlate : 15 possible sky positions to use as objects from a possible 461. plFiberPlate : 24 possible sky positions to use as objects from a possible 460. plFiberPlate : 43 possible sky positions to use as objects from a possible 459. plFiberPlate : 34 possible sky positions to use as objects from a possible 458. plFiberPlate : 17 possible sky positions to use as objects from a possible 457. plFiberPlate : 15 possible sky positions to use as objects from a possible 456. plFiberPlate : 5 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 15 possible sky positions to use as objects from a possible 453. plFiberPlate : 6 possible sky positions to use as objects from a possible 452. plFiberPlate : 45 possible sky positions to use as objects from a possible 451. plFiberPlate : 67 possible sky positions to use as objects from a possible 450. plFiberPlate : 48 possible sky positions to use as objects from a possible 449. plFiberPlate : 25 possible sky positions to use as objects from a possible 448. plFiberPlate : 27 possible sky positions to use as objects from a possible 447. plFiberPlate : 8 possible sky positions to use as objects from a possible 446. plFiberPlate : 6 possible sky positions to use as objects from a possible 445. plFiberPlate : 24 possible sky positions to use as objects from a possible 444. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0815.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0816.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0816.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0817.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 114 2 15 88 3 8 41 4 9 31 5 24 104 6 26 83 7 20 98 8 22 114 9 25 103 10 30 135 11 22 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 47 46 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 48 8 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 47 66 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 47 5 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 57 117 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 56 59 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 60 38 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 52 102 plFiberPlate : 50 possible sky positions to use as objects from a possible 499. plFiberPlate : 36 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 28 possible sky positions to use as objects from a possible 496. plFiberPlate : 32 possible sky positions to use as objects from a possible 495. plFiberPlate : 12 possible sky positions to use as objects from a possible 494. plFiberPlate : 33 possible sky positions to use as objects from a possible 493. plFiberPlate : 26 possible sky positions to use as objects from a possible 492. plFiberPlate : 34 possible sky positions to use as objects from a possible 491. plFiberPlate : 14 possible sky positions to use as objects from a possible 490. plFiberPlate : 7 possible sky positions to use as objects from a possible 489. plFiberPlate : 7 possible sky positions to use as objects from a possible 488. plFiberPlate : 13 possible sky positions to use as objects from a possible 487. plFiberPlate : 12 possible sky positions to use as objects from a possible 486. plFiberPlate : 6 possible sky positions to use as objects from a possible 485. plFiberPlate : 12 possible sky positions to use as objects from a possible 484. plFiberPlate : 60 possible sky positions to use as objects from a possible 483. plFiberPlate : 58 possible sky positions to use as objects from a possible 482. plFiberPlate : 46 possible sky positions to use as objects from a possible 481. plFiberPlate : 34 possible sky positions to use as objects from a possible 480. plFiberPlate : 12 possible sky positions to use as objects from a possible 479. plFiberPlate : 9 possible sky positions to use as objects from a possible 478. plFiberPlate : 12 possible sky positions to use as objects from a possible 477. plFiberPlate : 12 possible sky positions to use as objects from a possible 476. plFiberPlate : 19 possible sky positions to use as objects from a possible 475. plFiberPlate : 32 possible sky positions to use as objects from a possible 474. plFiberPlate : 40 possible sky positions to use as objects from a possible 473. plFiberPlate : 37 possible sky positions to use as objects from a possible 472. plFiberPlate : 26 possible sky positions to use as objects from a possible 471. plFiberPlate : 15 possible sky positions to use as objects from a possible 470. plFiberPlate : 11 possible sky positions to use as objects from a possible 469. plFiberPlate : 16 possible sky positions to use as objects from a possible 468. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0816.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0817.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0817.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0818.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 121 2 20 79 3 3 31 4 8 35 5 26 94 6 18 89 7 16 96 8 24 113 9 15 89 10 25 96 11 24 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 75 90 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 62 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 77 44 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 71 29 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 76 91 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 74 26 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 65 56 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 69 77 plFiberPlate : 27 possible sky positions to use as objects from a possible 477. plFiberPlate : 16 possible sky positions to use as objects from a possible 476. plFiberPlate : 8 possible sky positions to use as objects from a possible 475. plFiberPlate : 8 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 30 possible sky positions to use as objects from a possible 472. plFiberPlate : 52 possible sky positions to use as objects from a possible 471. plFiberPlate : 26 possible sky positions to use as objects from a possible 470. plFiberPlate : 8 possible sky positions to use as objects from a possible 469. plFiberPlate : 10 possible sky positions to use as objects from a possible 468. plFiberPlate : 5 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 4 possible sky positions to use as objects from a possible 465. plFiberPlate : 8 possible sky positions to use as objects from a possible 464. plFiberPlate : 19 possible sky positions to use as objects from a possible 463. plFiberPlate : 19 possible sky positions to use as objects from a possible 462. plFiberPlate : 52 possible sky positions to use as objects from a possible 461. plFiberPlate : 37 possible sky positions to use as objects from a possible 460. plFiberPlate : 24 possible sky positions to use as objects from a possible 459. plFiberPlate : 10 possible sky positions to use as objects from a possible 458. plFiberPlate : 7 possible sky positions to use as objects from a possible 457. plFiberPlate : 10 possible sky positions to use as objects from a possible 456. plFiberPlate : 6 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 44 possible sky positions to use as objects from a possible 453. plFiberPlate : 45 possible sky positions to use as objects from a possible 452. plFiberPlate : 24 possible sky positions to use as objects from a possible 451. plFiberPlate : 15 possible sky positions to use as objects from a possible 450. plFiberPlate : 6 possible sky positions to use as objects from a possible 449. plFiberPlate : 11 possible sky positions to use as objects from a possible 448. plFiberPlate : 16 possible sky positions to use as objects from a possible 447. plFiberPlate : 27 possible sky positions to use as objects from a possible 446. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0817.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0818.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0818.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0819.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 92 2 17 73 3 4 24 4 6 20 5 22 96 6 20 88 7 16 73 8 11 68 9 18 90 10 25 99 11 23 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 85 36 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 92 101 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 84 27 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 90 168 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 85 50 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 87 32 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 91 77 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 85 63 plFiberPlate : 27 possible sky positions to use as objects from a possible 400. plFiberPlate : 17 possible sky positions to use as objects from a possible 399. plFiberPlate : 30 possible sky positions to use as objects from a possible 398. plFiberPlate : 14 possible sky positions to use as objects from a possible 397. plFiberPlate : 13 possible sky positions to use as objects from a possible 396. plFiberPlate : 31 possible sky positions to use as objects from a possible 395. plFiberPlate : 19 possible sky positions to use as objects from a possible 394. plFiberPlate : 26 possible sky positions to use as objects from a possible 393. plFiberPlate : 20 possible sky positions to use as objects from a possible 392. plFiberPlate : 14 possible sky positions to use as objects from a possible 391. plFiberPlate : 6 possible sky positions to use as objects from a possible 390. plFiberPlate : 15 possible sky positions to use as objects from a possible 389. plFiberPlate : 5 possible sky positions to use as objects from a possible 388. plFiberPlate : 11 possible sky positions to use as objects from a possible 387. plFiberPlate : 6 possible sky positions to use as objects from a possible 386. plFiberPlate : 10 possible sky positions to use as objects from a possible 385. plFiberPlate : 62 possible sky positions to use as objects from a possible 384. plFiberPlate : 48 possible sky positions to use as objects from a possible 383. plFiberPlate : 29 possible sky positions to use as objects from a possible 382. plFiberPlate : 23 possible sky positions to use as objects from a possible 381. plFiberPlate : 15 possible sky positions to use as objects from a possible 380. plFiberPlate : 18 possible sky positions to use as objects from a possible 379. plFiberPlate : 12 possible sky positions to use as objects from a possible 378. plFiberPlate : 11 possible sky positions to use as objects from a possible 377. plFiberPlate : 7 possible sky positions to use as objects from a possible 376. plFiberPlate : 47 possible sky positions to use as objects from a possible 375. plFiberPlate : 42 possible sky positions to use as objects from a possible 374. plFiberPlate : 22 possible sky positions to use as objects from a possible 373. plFiberPlate : 19 possible sky positions to use as objects from a possible 372. plFiberPlate : 11 possible sky positions to use as objects from a possible 371. plFiberPlate : 15 possible sky positions to use as objects from a possible 370. plFiberPlate : 12 possible sky positions to use as objects from a possible 369. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0818.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0819.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0819.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0820.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 2 24 2 8 33 3 13 75 4 16 83 5 15 93 6 10 79 7 3 43 8 3 30 9 8 57 10 15 79 11 7 27 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1345 4 5 688 71 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 82 30 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 91 70 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 87 54 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 96 39 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 84 27 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 90 168 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 85 63 plFiberPlate : 81 possible sky positions to use as objects from a possible 315. plFiberPlate : 64 possible sky positions to use as objects from a possible 314. plFiberPlate : 56 possible sky positions to use as objects from a possible 313. plFiberPlate : 30 possible sky positions to use as objects from a possible 312. plFiberPlate : 17 possible sky positions to use as objects from a possible 311. plFiberPlate : 12 possible sky positions to use as objects from a possible 310. plFiberPlate : 13 possible sky positions to use as objects from a possible 309. plFiberPlate : 44 possible sky positions to use as objects from a possible 308. plFiberPlate : 36 possible sky positions to use as objects from a possible 307. plFiberPlate : 25 possible sky positions to use as objects from a possible 306. plFiberPlate : 17 possible sky positions to use as objects from a possible 305. plFiberPlate : 8 possible sky positions to use as objects from a possible 304. plFiberPlate : 8 possible sky positions to use as objects from a possible 303. plFiberPlate : 5 possible sky positions to use as objects from a possible 302. plFiberPlate : 5 possible sky positions to use as objects from a possible 301. plFiberPlate : 2 possible sky positions to use as objects from a possible 300. plFiberPlate : 61 possible sky positions to use as objects from a possible 299. plFiberPlate : 54 possible sky positions to use as objects from a possible 298. plFiberPlate : 39 possible sky positions to use as objects from a possible 297. plFiberPlate : 18 possible sky positions to use as objects from a possible 296. plFiberPlate : 3 possible sky positions to use as objects from a possible 295. plFiberPlate : 10 possible sky positions to use as objects from a possible 294. plFiberPlate : 9 possible sky positions to use as objects from a possible 293. plFiberPlate : 2 possible sky positions to use as objects from a possible 292. plFiberPlate : 1 possible sky positions to use as objects from a possible 291. plFiberPlate : 28 possible sky positions to use as objects from a possible 290. plFiberPlate : 28 possible sky positions to use as objects from a possible 289. plFiberPlate : 18 possible sky positions to use as objects from a possible 288. plFiberPlate : 6 possible sky positions to use as objects from a possible 287. plFiberPlate : 14 possible sky positions to use as objects from a possible 286. plFiberPlate : 2 possible sky positions to use as objects from a possible 285. plFiberPlate : 12 possible sky positions to use as objects from a possible 284. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0819.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0820.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0820.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0821.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 69 2 13 64 3 5 24 4 5 32 5 27 92 6 28 78 7 6 28 8 2 18 9 25 72 10 21 99 11 16 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 111 102 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 96 39 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 109 142 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 112 56 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 103 81 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 105 82 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 108 26 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 111 65 plFiberPlate : 24 possible sky positions to use as objects from a possible 311. plFiberPlate : 11 possible sky positions to use as objects from a possible 310. plFiberPlate : 8 possible sky positions to use as objects from a possible 309. plFiberPlate : 11 possible sky positions to use as objects from a possible 308. plFiberPlate : 13 possible sky positions to use as objects from a possible 307. plFiberPlate : 24 possible sky positions to use as objects from a possible 306. plFiberPlate : 17 possible sky positions to use as objects from a possible 305. plFiberPlate : 36 possible sky positions to use as objects from a possible 304. plFiberPlate : 9 possible sky positions to use as objects from a possible 303. plFiberPlate : 19 possible sky positions to use as objects from a possible 302. plFiberPlate : 7 possible sky positions to use as objects from a possible 301. plFiberPlate : 5 possible sky positions to use as objects from a possible 300. plFiberPlate : 7 possible sky positions to use as objects from a possible 299. plFiberPlate : 0 possible sky positions to use as objects from a possible 298. plFiberPlate: No sky found for bundle at 178.798 -93.161, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 298. plFiberPlate : 0 possible sky positions to use as objects from a possible 297. plFiberPlate: No sky found for bundle at 194.398 -72.457, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 297. plFiberPlate: No sky found for bundle at 194.398 -72.457, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 297. plFiberPlate: No sky found for bundle at 194.398 -72.457, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 297. plFiberPlate : 8 possible sky positions to use as objects from a possible 296. plFiberPlate : 42 possible sky positions to use as objects from a possible 295. plFiberPlate : 31 possible sky positions to use as objects from a possible 294. plFiberPlate : 18 possible sky positions to use as objects from a possible 293. plFiberPlate : 16 possible sky positions to use as objects from a possible 292. plFiberPlate : 6 possible sky positions to use as objects from a possible 291. plFiberPlate : 8 possible sky positions to use as objects from a possible 290. plFiberPlate : 6 possible sky positions to use as objects from a possible 289. plFiberPlate : 3 possible sky positions to use as objects from a possible 288. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.257 -18.743, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.257 -18.743, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.257 -18.743, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 287. plFiberPlate: No sky found for bundle at 194.257 -18.743, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 287. plFiberPlate : 48 possible sky positions to use as objects from a possible 286. plFiberPlate : 33 possible sky positions to use as objects from a possible 285. plFiberPlate : 37 possible sky positions to use as objects from a possible 284. plFiberPlate : 20 possible sky positions to use as objects from a possible 283. plFiberPlate : 14 possible sky positions to use as objects from a possible 282. plFiberPlate : 12 possible sky positions to use as objects from a possible 281. plFiberPlate : 5 possible sky positions to use as objects from a possible 280. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0820.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0821.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0821.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0822.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 66 2 15 61 3 5 11 4 2 15 5 18 77 6 16 63 7 6 20 8 0 18 9 15 70 10 19 69 11 17 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 8 at 227.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 113 148 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 126 48 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 114 145 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 117 160 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 127 50 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 130 41 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 122 32 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 116 39 plFiberPlate : 18 possible sky positions to use as objects from a possible 257. plFiberPlate : 6 possible sky positions to use as objects from a possible 256. plFiberPlate : 12 possible sky positions to use as objects from a possible 255. plFiberPlate : 16 possible sky positions to use as objects from a possible 254. plFiberPlate : 14 possible sky positions to use as objects from a possible 253. plFiberPlate : 11 possible sky positions to use as objects from a possible 252. plFiberPlate : 23 possible sky positions to use as objects from a possible 251. plFiberPlate : 20 possible sky positions to use as objects from a possible 250. plFiberPlate : 13 possible sky positions to use as objects from a possible 249. plFiberPlate : 8 possible sky positions to use as objects from a possible 248. plFiberPlate : 10 possible sky positions to use as objects from a possible 247. plFiberPlate : 1 possible sky positions to use as objects from a possible 246. plFiberPlate : 4 possible sky positions to use as objects from a possible 245. plFiberPlate : 3 possible sky positions to use as objects from a possible 244. plFiberPlate : 7 possible sky positions to use as objects from a possible 243. plFiberPlate : 4 possible sky positions to use as objects from a possible 242. plFiberPlate : 39 possible sky positions to use as objects from a possible 241. plFiberPlate : 49 possible sky positions to use as objects from a possible 240. plFiberPlate : 39 possible sky positions to use as objects from a possible 239. plFiberPlate : 29 possible sky positions to use as objects from a possible 238. plFiberPlate : 15 possible sky positions to use as objects from a possible 237. plFiberPlate : 5 possible sky positions to use as objects from a possible 236. plFiberPlate : 13 possible sky positions to use as objects from a possible 235. plFiberPlate : 5 possible sky positions to use as objects from a possible 234. plFiberPlate : 18 possible sky positions to use as objects from a possible 233. plFiberPlate : 19 possible sky positions to use as objects from a possible 232. plFiberPlate : 28 possible sky positions to use as objects from a possible 231. plFiberPlate : 31 possible sky positions to use as objects from a possible 230. plFiberPlate : 27 possible sky positions to use as objects from a possible 229. plFiberPlate : 14 possible sky positions to use as objects from a possible 228. plFiberPlate : 11 possible sky positions to use as objects from a possible 227. plFiberPlate : 10 possible sky positions to use as objects from a possible 226. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0821.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0822.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0822.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0823.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 61 2 22 57 3 4 20 4 0 9 5 12 49 6 13 55 7 3 12 8 2 7 9 14 53 10 13 80 11 17 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 4 at -227.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 149 88 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 134 8 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 141 78 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 146 129 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 148 55 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 138 112 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 130 41 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 136 72 plFiberPlate : 28 possible sky positions to use as objects from a possible 212. plFiberPlate : 6 possible sky positions to use as objects from a possible 211. plFiberPlate : 6 possible sky positions to use as objects from a possible 210. plFiberPlate : 7 possible sky positions to use as objects from a possible 209. plFiberPlate : 17 possible sky positions to use as objects from a possible 208. plFiberPlate : 24 possible sky positions to use as objects from a possible 207. plFiberPlate : 5 possible sky positions to use as objects from a possible 206. plFiberPlate : 17 possible sky positions to use as objects from a possible 205. plFiberPlate : 14 possible sky positions to use as objects from a possible 204. plFiberPlate : 12 possible sky positions to use as objects from a possible 203. plFiberPlate : 4 possible sky positions to use as objects from a possible 202. plFiberPlate : 9 possible sky positions to use as objects from a possible 201. plFiberPlate : 6 possible sky positions to use as objects from a possible 200. plFiberPlate : 5 possible sky positions to use as objects from a possible 199. plFiberPlate : 3 possible sky positions to use as objects from a possible 198. plFiberPlate : 11 possible sky positions to use as objects from a possible 197. plFiberPlate : 24 possible sky positions to use as objects from a possible 196. plFiberPlate : 20 possible sky positions to use as objects from a possible 195. plFiberPlate : 20 possible sky positions to use as objects from a possible 194. plFiberPlate : 13 possible sky positions to use as objects from a possible 193. plFiberPlate : 9 possible sky positions to use as objects from a possible 192. plFiberPlate : 2 possible sky positions to use as objects from a possible 191. plFiberPlate : 10 possible sky positions to use as objects from a possible 190. plFiberPlate : 5 possible sky positions to use as objects from a possible 189. plFiberPlate : 1 possible sky positions to use as objects from a possible 188. plFiberPlate : 17 possible sky positions to use as objects from a possible 187. plFiberPlate : 26 possible sky positions to use as objects from a possible 186. plFiberPlate : 28 possible sky positions to use as objects from a possible 185. plFiberPlate : 28 possible sky positions to use as objects from a possible 184. plFiberPlate : 23 possible sky positions to use as objects from a possible 183. plFiberPlate : 19 possible sky positions to use as objects from a possible 182. plFiberPlate : 8 possible sky positions to use as objects from a possible 181. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0822.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0823.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0823.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.11.4/plPlugMapP-0824.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 32 2 11 35 3 7 9 4 6 9 5 18 50 6 13 39 7 1 14 8 0 4 9 11 40 10 23 49 11 11 46 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 8 at 227.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 151 170 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 156 142 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 160 60 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 164 85 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 152 27 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 152 170 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 164 124 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 167 27 plFiberPlate : 9 possible sky positions to use as objects from a possible 158. plFiberPlate : 4 possible sky positions to use as objects from a possible 157. plFiberPlate : 10 possible sky positions to use as objects from a possible 156. plFiberPlate : 7 possible sky positions to use as objects from a possible 155. plFiberPlate : 8 possible sky positions to use as objects from a possible 154. plFiberPlate : 10 possible sky positions to use as objects from a possible 153. plFiberPlate : 9 possible sky positions to use as objects from a possible 152. plFiberPlate : 11 possible sky positions to use as objects from a possible 151. plFiberPlate : 7 possible sky positions to use as objects from a possible 150. plFiberPlate : 2 possible sky positions to use as objects from a possible 149. plFiberPlate : 5 possible sky positions to use as objects from a possible 148. plFiberPlate : 7 possible sky positions to use as objects from a possible 147. plFiberPlate : 1 possible sky positions to use as objects from a possible 146. plFiberPlate : 5 possible sky positions to use as objects from a possible 145. plFiberPlate : 3 possible sky positions to use as objects from a possible 144. plFiberPlate : 3 possible sky positions to use as objects from a possible 143. plFiberPlate : 24 possible sky positions to use as objects from a possible 142. plFiberPlate : 23 possible sky positions to use as objects from a possible 141. plFiberPlate : 15 possible sky positions to use as objects from a possible 140. plFiberPlate : 12 possible sky positions to use as objects from a possible 139. plFiberPlate : 10 possible sky positions to use as objects from a possible 138. plFiberPlate : 3 possible sky positions to use as objects from a possible 137. plFiberPlate : 2 possible sky positions to use as objects from a possible 136. plFiberPlate : 2 possible sky positions to use as objects from a possible 135. plFiberPlate : 5 possible sky positions to use as objects from a possible 134. plFiberPlate : 21 possible sky positions to use as objects from a possible 133. plFiberPlate : 14 possible sky positions to use as objects from a possible 132. plFiberPlate : 17 possible sky positions to use as objects from a possible 131. plFiberPlate : 10 possible sky positions to use as objects from a possible 130. plFiberPlate : 15 possible sky positions to use as objects from a possible 129. plFiberPlate : 10 possible sky positions to use as objects from a possible 128. plFiberPlate : 5 possible sky positions to use as objects from a possible 127. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0823.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0824.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.11.4/plOverlay-0824.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Nov 28 16:20:39 CST 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 13 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0812.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0812.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0812.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0813.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0813.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0813.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0814.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8722,-3.8625) and (12.55,-2.53) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0814.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0814.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0815.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.9993,8.9119) and (5.94,11.11) plMakeFanucCodes : fixed path between (5.9931,-11.2942) and (4.10,-12.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0815.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0815.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0816.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0816.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0816.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0817.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.7419,11.6799) and (-3.03,12.43) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0817.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0817.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0818.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0818.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0818.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0819.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0819.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0819.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0820.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0820.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0820.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0821.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0821.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0821.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0822.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0822.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0822.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0823.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0823.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0823.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0824.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0824.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.8246,-10.6730) and (0.33,-12.09) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.11.4/plFanuc-0824.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Nov 28 16:21:29 CST 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e0f8e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 13 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 812 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 813 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 814 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 815 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 816 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 817 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 818 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 819 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 820 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 821 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 822 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 823 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 824 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Nov 28 16:21:53 CST 2001 Begin running plateEnder dr2001.11.4 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_37/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_37 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Wed Nov 28 16:22:38 CST 2001 ALL DONE PS: Read file for stderr output of this job.