Sender: LSF System Subject: Job 26851: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Apr 9 10:52:31 2001 Results reported at Mon Apr 9 10:55:44 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /usr/local/etc/fermi.shrc ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v9_3 -f OSF1 -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.4.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 172.71 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Apr 9 10:52:33 CDT 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Apr 9 10:52:35 CDT 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/encp/v2_4:/p/OSF1/ktools/v1_4/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/p/OSF1/ups/v4_4a/bin:/p/OSF1/emacs/v19_30a/bin:/p/OSF1/sdsscvs/v1_4/bin:/p/OSF1/rcs/v5_6/bin:/p/OSF1/diff/v1_0/bin:/p/OSF1/cvs/v1_10/bin:/home/s1/bgreen/bin:/usr/sbin:/usr/ccs/bin:/bin:/usr/bin:/usr/lbin:/usr/ucb:/etc:/usr/bin/X11:/usr/local/bin:.:/p/OSF1/ssc/v4_6/bin:/p/OSF1/astrom/v3_3/bin:/p/OSF1/photo/v5_2_17/bin:/p/OSF1/mt/v7_2/bin:/p/OSF1/ghostview/v4_0b/bin:/p/OSF1/dp/v9_3/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_10/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/dervish/v7_15/bin:/p/OSF1/sdssmath/v5_0/bin:/p/OSF1/astrotools/v5_2/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Mon Apr 9 10:52:35 CDT 2001 ASTROM_DIR=/p/OSF1/astrom/v3_3 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_2 CVS_DIR=/p/OSF1/cvs/v1_10 DERVISH_DIR=/p/OSF1/dervish/v7_15 DIFF_DIR=/p/OSF1/diff/v1_0 DP_DIR=/p/OSF1/dp/v9_3 EMACS_DIR=/p/OSF1/emacs/v19_30a ENCP_DIR=/p/OSF1/encp/v2_4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INT_DIR=/p/OSF1/dervish/v7_15/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_1 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_2 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_7_8 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_17 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 RCS_DIR=/p/OSF1/rcs/v5_6 SDSSCVS_DIR=/p/OSF1/sdsscvs/v1_4 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_0 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_10 SETUPS_DIR=/usr/local/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_6 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/data/dp3.b/data/ucac/v0_7 UPS_DIR=/p/OSF1/ups/v4_4a --------------------------------------------------------------- Mon Apr 9 10:52:35 CDT 2001 Begin running plate --------------------------------------------------------------- Mon Apr 9 10:52:35 CDT 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v9_3/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v9_3 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140db98e8 makePlates : beginning loop over plObs chain; makePlates : making 14 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0373.par makePlates : plateInfo struct for plate 582 : (h2).mjd 52065 (h2).raCen 211.5605 (h2).decCen 4.403174 (h2).haCen 13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 211.560 4.403 211.560 5.903 plMakePlateFromTile : mjd of obs : 52065.624052 Observed HA/dec of plate center, fiducial point (deg) : 12.998 4.407 12.998 5.907 The rotation angle of the fid. point is -21.635118 plMakePlateFromTile : beginning loop over 1255 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0374.par makePlates : plateInfo struct for plate 583 : (h2).mjd 52065 (h2).raCen 213.7811 (h2).decCen 4.291871 (h2).haCen 11 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 213.781 4.292 213.781 5.792 plMakePlateFromTile : mjd of obs : 52065.624662 Observed HA/dec of plate center, fiducial point (deg) : 10.998 4.296 10.998 5.795 The rotation angle of the fid. point is -18.550990 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-93.29, 241.62, 8.4) and (-93.29, 241.33, 8.5) checkLTHo : distance = 0.295, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-93.29, 241.33, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0375.par makePlates : plateInfo struct for plate 584 : (h2).mjd 52065 (h2).raCen 215.6964 (h2).decCen 4.105816 (h2).haCen 9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 215.696 4.106 215.696 5.606 plMakePlateFromTile : mjd of obs : 52065.624426 Observed HA/dec of plate center, fiducial point (deg) : 8.998 4.110 8.998 5.609 The rotation angle of the fid. point is -15.308769 plMakePlateFromTile : beginning loop over 1356 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0376.par makePlates : plateInfo struct for plate 585 : (h2).mjd 52065 (h2).raCen 217.5007 (h2).decCen 4.011527 (h2).haCen 22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 217.501 4.012 217.501 5.512 plMakePlateFromTile : mjd of obs : 52065.665448 Observed HA/dec of plate center, fiducial point (deg) : 21.998 4.016 21.998 5.516 The rotation angle of the fid. point is -32.977314 plMakePlateFromTile : beginning loop over 1404 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0377.par makePlates : plateInfo struct for plate 586 : (h2).mjd 52065 (h2).raCen 219.3664 (h2).decCen 3.926835 (h2).haCen 20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 219.366 3.927 219.366 5.427 plMakePlateFromTile : mjd of obs : 52065.665074 Observed HA/dec of plate center, fiducial point (deg) : 19.998 3.932 19.998 5.431 The rotation angle of the fid. point is -30.617393 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0378.par makePlates : plateInfo struct for plate 587 : (h2).mjd 52065 (h2).raCen 221.2692 (h2).decCen 3.849299 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 221.269 3.849 221.269 5.349 plMakePlateFromTile : mjd of obs : 52065.664804 Observed HA/dec of plate center, fiducial point (deg) : 17.998 3.854 17.998 5.354 The rotation angle of the fid. point is -28.110114 plMakePlateFromTile : beginning loop over 1313 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0379.par makePlates : plateInfo struct for plate 588 : (h2).mjd 52065 (h2).raCen 223.3049 (h2).decCen 3.854255 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 223.305 3.854 223.305 5.354 plMakePlateFromTile : mjd of obs : 52065.664901 Observed HA/dec of plate center, fiducial point (deg) : 15.998 3.859 15.998 5.359 The rotation angle of the fid. point is -25.506292 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0380.par makePlates : plateInfo struct for plate 589 : (h2).mjd 52065 (h2).raCen 225.6774 (h2).decCen 3.764108 (h2).haCen 14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 225.677 3.764 225.677 5.264 plMakePlateFromTile : mjd of obs : 52065.665932 Observed HA/dec of plate center, fiducial point (deg) : 13.998 3.769 13.998 5.269 The rotation angle of the fid. point is -22.686899 plMakePlateFromTile : beginning loop over 1312 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0381.par makePlates : plateInfo struct for plate 590 : (h2).mjd 52065 (h2).raCen 227.3057 (h2).decCen 3.51666 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 227.306 3.517 227.306 5.017 plMakePlateFromTile : mjd of obs : 52065.664901 Observed HA/dec of plate center, fiducial point (deg) : 11.998 3.522 11.998 5.021 The rotation angle of the fid. point is -19.640568 plMakePlateFromTile : beginning loop over 1366 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0382.par makePlates : plateInfo struct for plate 591 : (h2).mjd 52065 (h2).raCen 229.4444 (h2).decCen 3.400621 (h2).haCen 25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 229.444 3.401 229.444 4.901 plMakePlateFromTile : mjd of obs : 52065.706849 Observed HA/dec of plate center, fiducial point (deg) : 24.998 3.407 24.998 4.906 The rotation angle of the fid. point is -35.667853 plMakePlateFromTile : beginning loop over 1180 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0383.par makePlates : plateInfo struct for plate 592 : (h2).mjd 52065 (h2).raCen 231.4444 (h2).decCen 3.400026 (h2).haCen 23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 231.444 3.400 231.444 4.900 plMakePlateFromTile : mjd of obs : 52065.706848 Observed HA/dec of plate center, fiducial point (deg) : 22.998 3.406 22.998 4.906 The rotation angle of the fid. point is -33.604123 plMakePlateFromTile : beginning loop over 1126 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0384.par makePlates : plateInfo struct for plate 593 : (h2).mjd 52065 (h2).raCen 233.6779 (h2).decCen 3.258828 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 233.678 3.259 233.678 4.759 plMakePlateFromTile : mjd of obs : 52065.707493 Observed HA/dec of plate center, fiducial point (deg) : 20.998 3.265 20.998 4.765 The rotation angle of the fid. point is -31.290992 plMakePlateFromTile : beginning loop over 1132 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0385.par makePlates : plateInfo struct for plate 594 : (h2).mjd 52065 (h2).raCen 236.4606 (h2).decCen 3.066586 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 236.461 3.067 236.461 4.567 plMakePlateFromTile : mjd of obs : 52065.706889 Observed HA/dec of plate center, fiducial point (deg) : 17.998 3.073 17.998 4.572 The rotation angle of the fid. point is -27.566657 plMakePlateFromTile : beginning loop over 1101 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk17/complete//plPlugMapT-0386.par makePlates : plateInfo struct for plate 595 : (h2).mjd 52065 (h2).raCen 239.4913 (h2).decCen 2.998434 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 11.2 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 239.491 2.998 239.491 4.498 plMakePlateFromTile : mjd of obs : 52065.706972 Observed HA/dec of plate center, fiducial point (deg) : 14.998 3.005 14.998 4.504 The rotation angle of the fid. point is -23.603104 plMakePlateFromTile : beginning loop over 1024 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Apr 9 10:53:13 CDT 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v9_3/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v9_3 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 14 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0582.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 111 2 13 101 3 9 100 4 9 77 5 11 80 6 12 65 7 7 59 8 21 90 9 14 102 10 19 157 11 16 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 191 20 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 206 6 plFiberPlate : adding spectro-photo std with objId = 1478 2 6 20 9 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 194 27 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 206 6 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 200 36 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 29 12 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 28 26 plFiberPlate : 96 possible sky positions to use as objects from a possible 504. plFiberPlate : 84 possible sky positions to use as objects from a possible 503. plFiberPlate : 62 possible sky positions to use as objects from a possible 502. plFiberPlate : 31 possible sky positions to use as objects from a possible 501. plFiberPlate : 43 possible sky positions to use as objects from a possible 500. plFiberPlate : 21 possible sky positions to use as objects from a possible 499. plFiberPlate : 56 possible sky positions to use as objects from a possible 498. plFiberPlate : 59 possible sky positions to use as objects from a possible 497. plFiberPlate : 41 possible sky positions to use as objects from a possible 496. plFiberPlate : 42 possible sky positions to use as objects from a possible 495. plFiberPlate : 22 possible sky positions to use as objects from a possible 494. plFiberPlate : 26 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 5 possible sky positions to use as objects from a possible 491. plFiberPlate : 19 possible sky positions to use as objects from a possible 490. plFiberPlate : 18 possible sky positions to use as objects from a possible 489. plFiberPlate : 54 possible sky positions to use as objects from a possible 488. plFiberPlate : 45 possible sky positions to use as objects from a possible 487. plFiberPlate : 30 possible sky positions to use as objects from a possible 486. plFiberPlate : 17 possible sky positions to use as objects from a possible 485. plFiberPlate : 18 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 12 possible sky positions to use as objects from a possible 482. plFiberPlate : 19 possible sky positions to use as objects from a possible 481. plFiberPlate : 7 possible sky positions to use as objects from a possible 480. plFiberPlate : 31 possible sky positions to use as objects from a possible 479. plFiberPlate : 21 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 3 possible sky positions to use as objects from a possible 476. plFiberPlate : 1 possible sky positions to use as objects from a possible 475. plFiberPlate : 1 possible sky positions to use as objects from a possible 474. plFiberPlate : 4 possible sky positions to use as objects from a possible 473. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0582.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0582.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0583.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 113 2 21 89 3 26 86 4 26 106 5 30 107 6 17 55 7 15 51 8 16 98 9 21 93 10 38 137 11 18 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 6 39 51 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 47 68 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 42 28 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 210 18 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 36 40 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 206 6 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 38 24 plFiberPlate : adding spectro-photo std with objId = 1478 2 6 40 32 plFiberPlate : 97 possible sky positions to use as objects from a possible 521. plFiberPlate : 77 possible sky positions to use as objects from a possible 520. plFiberPlate : 37 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 16 possible sky positions to use as objects from a possible 517. plFiberPlate : 38 possible sky positions to use as objects from a possible 516. plFiberPlate : 50 possible sky positions to use as objects from a possible 515. plFiberPlate : 89 possible sky positions to use as objects from a possible 514. plFiberPlate : 52 possible sky positions to use as objects from a possible 513. plFiberPlate : 36 possible sky positions to use as objects from a possible 512. plFiberPlate : 19 possible sky positions to use as objects from a possible 511. plFiberPlate : 0 possible sky positions to use as objects from a possible 510. plFiberPlate: No sky found for bundle at 12.002 -22.884, increase box by 10 percent. plFiberPlate : 4 possible sky positions to use as objects from a possible 510. plFiberPlate : 7 possible sky positions to use as objects from a possible 509. plFiberPlate : 15 possible sky positions to use as objects from a possible 508. plFiberPlate : 23 possible sky positions to use as objects from a possible 507. plFiberPlate : 36 possible sky positions to use as objects from a possible 506. plFiberPlate : 31 possible sky positions to use as objects from a possible 505. plFiberPlate : 22 possible sky positions to use as objects from a possible 504. plFiberPlate : 19 possible sky positions to use as objects from a possible 503. plFiberPlate : 6 possible sky positions to use as objects from a possible 502. plFiberPlate : 2 possible sky positions to use as objects from a possible 501. plFiberPlate : 6 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 17 possible sky positions to use as objects from a possible 498. plFiberPlate : 13 possible sky positions to use as objects from a possible 497. plFiberPlate : 28 possible sky positions to use as objects from a possible 496. plFiberPlate : 15 possible sky positions to use as objects from a possible 495. plFiberPlate : 13 possible sky positions to use as objects from a possible 494. plFiberPlate : 7 possible sky positions to use as objects from a possible 493. plFiberPlate : 3 possible sky positions to use as objects from a possible 492. plFiberPlate : 6 possible sky positions to use as objects from a possible 491. plFiberPlate : 7 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0582.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0583.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0583.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0584.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 124 2 28 92 3 21 88 4 19 106 5 13 112 6 10 74 7 21 68 8 27 108 9 18 89 10 32 146 11 36 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 59 19 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 47 68 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 47 44 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 53 13 plFiberPlate : adding spectro-photo std with objId = 1478 2 6 51 25 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 223 34 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 605 16 plFiberPlate : adding spectro-photo std with objId = 1478 2 6 57 12 plFiberPlate : 121 possible sky positions to use as objects from a possible 556. plFiberPlate : 71 possible sky positions to use as objects from a possible 555. plFiberPlate : 37 possible sky positions to use as objects from a possible 554. plFiberPlate : 49 possible sky positions to use as objects from a possible 553. plFiberPlate : 23 possible sky positions to use as objects from a possible 552. plFiberPlate : 37 possible sky positions to use as objects from a possible 551. plFiberPlate : 30 possible sky positions to use as objects from a possible 550. plFiberPlate : 84 possible sky positions to use as objects from a possible 549. plFiberPlate : 70 possible sky positions to use as objects from a possible 548. plFiberPlate : 48 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 18 possible sky positions to use as objects from a possible 545. plFiberPlate : 9 possible sky positions to use as objects from a possible 544. plFiberPlate : 17 possible sky positions to use as objects from a possible 543. plFiberPlate : 17 possible sky positions to use as objects from a possible 542. plFiberPlate : 19 possible sky positions to use as objects from a possible 541. plFiberPlate : 52 possible sky positions to use as objects from a possible 540. plFiberPlate : 34 possible sky positions to use as objects from a possible 539. plFiberPlate : 22 possible sky positions to use as objects from a possible 538. plFiberPlate : 7 possible sky positions to use as objects from a possible 537. plFiberPlate : 2 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 21 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : 28 possible sky positions to use as objects from a possible 531. plFiberPlate : 26 possible sky positions to use as objects from a possible 530. plFiberPlate : 21 possible sky positions to use as objects from a possible 529. plFiberPlate : 10 possible sky positions to use as objects from a possible 528. plFiberPlate : 14 possible sky positions to use as objects from a possible 527. plFiberPlate : 9 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0583.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0584.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0584.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0585.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 119 2 24 99 3 31 104 4 29 114 5 28 133 6 18 83 7 12 66 8 20 105 9 22 103 10 32 156 11 17 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 68 42 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 241 13 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 57 16 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 233 18 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 58 14 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 62 43 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 239 8 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 245 7 plFiberPlate : 108 possible sky positions to use as objects from a possible 593. plFiberPlate : 81 possible sky positions to use as objects from a possible 592. plFiberPlate : 35 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 23 possible sky positions to use as objects from a possible 589. plFiberPlate : 25 possible sky positions to use as objects from a possible 588. plFiberPlate : 36 possible sky positions to use as objects from a possible 587. plFiberPlate : 51 possible sky positions to use as objects from a possible 586. plFiberPlate : 28 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 6 possible sky positions to use as objects from a possible 583. plFiberPlate : 19 possible sky positions to use as objects from a possible 582. plFiberPlate : 7 possible sky positions to use as objects from a possible 581. plFiberPlate : 4 possible sky positions to use as objects from a possible 580. plFiberPlate : 6 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : 93 possible sky positions to use as objects from a possible 577. plFiberPlate : 72 possible sky positions to use as objects from a possible 576. plFiberPlate : 30 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 5 possible sky positions to use as objects from a possible 573. plFiberPlate : 11 possible sky positions to use as objects from a possible 572. plFiberPlate : 8 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 43 possible sky positions to use as objects from a possible 568. plFiberPlate : 31 possible sky positions to use as objects from a possible 567. plFiberPlate : 23 possible sky positions to use as objects from a possible 566. plFiberPlate : 4 possible sky positions to use as objects from a possible 565. plFiberPlate : 3 possible sky positions to use as objects from a possible 564. plFiberPlate : 7 possible sky positions to use as objects from a possible 563. plFiberPlate : 7 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0584.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0585.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0585.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0586.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 112 2 29 107 3 18 101 4 19 113 5 20 121 6 12 68 7 13 69 8 20 112 9 18 93 10 27 147 11 25 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 72 2 plFiberPlate : adding spectro-photo std with objId = 1478 2 6 73 22 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 241 13 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 76 65 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 250 6 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 257 15 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 245 7 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 81 37 plFiberPlate : 80 possible sky positions to use as objects from a possible 557. plFiberPlate : 68 possible sky positions to use as objects from a possible 556. plFiberPlate : 31 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 18 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 21 possible sky positions to use as objects from a possible 551. plFiberPlate : 42 possible sky positions to use as objects from a possible 550. plFiberPlate : 25 possible sky positions to use as objects from a possible 549. plFiberPlate : 19 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 7 possible sky positions to use as objects from a possible 546. plFiberPlate : 3 possible sky positions to use as objects from a possible 545. plFiberPlate : 5 possible sky positions to use as objects from a possible 544. plFiberPlate : 10 possible sky positions to use as objects from a possible 543. plFiberPlate : 16 possible sky positions to use as objects from a possible 542. plFiberPlate : 80 possible sky positions to use as objects from a possible 541. plFiberPlate : 52 possible sky positions to use as objects from a possible 540. plFiberPlate : 42 possible sky positions to use as objects from a possible 539. plFiberPlate : 19 possible sky positions to use as objects from a possible 538. plFiberPlate : 3 possible sky positions to use as objects from a possible 537. plFiberPlate : 4 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 37 possible sky positions to use as objects from a possible 532. plFiberPlate : 36 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 7 possible sky positions to use as objects from a possible 529. plFiberPlate : 18 possible sky positions to use as objects from a possible 528. plFiberPlate : 7 possible sky positions to use as objects from a possible 527. plFiberPlate : 17 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0585.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0586.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0586.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0587.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 120 2 24 98 3 18 90 4 18 101 5 17 118 6 10 69 7 15 62 8 19 96 9 14 90 10 32 139 11 31 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 264 28 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 268 21 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 87 15 plFiberPlate : adding spectro-photo std with objId = 1478 2 6 91 13 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 257 32 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 257 15 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 95 54 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 259 48 plFiberPlate : 75 possible sky positions to use as objects from a possible 537. plFiberPlate : 64 possible sky positions to use as objects from a possible 536. plFiberPlate : 55 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 31 possible sky positions to use as objects from a possible 533. plFiberPlate : 25 possible sky positions to use as objects from a possible 532. plFiberPlate : 55 possible sky positions to use as objects from a possible 531. plFiberPlate : 49 possible sky positions to use as objects from a possible 530. plFiberPlate : 38 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 9 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 11 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 13 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 56 possible sky positions to use as objects from a possible 521. plFiberPlate : 46 possible sky positions to use as objects from a possible 520. plFiberPlate : 31 possible sky positions to use as objects from a possible 519. plFiberPlate : 13 possible sky positions to use as objects from a possible 518. plFiberPlate : 5 possible sky positions to use as objects from a possible 517. plFiberPlate : 15 possible sky positions to use as objects from a possible 516. plFiberPlate : 10 possible sky positions to use as objects from a possible 515. plFiberPlate : 11 possible sky positions to use as objects from a possible 514. plFiberPlate : 16 possible sky positions to use as objects from a possible 513. plFiberPlate : 54 possible sky positions to use as objects from a possible 512. plFiberPlate : 30 possible sky positions to use as objects from a possible 511. plFiberPlate : 14 possible sky positions to use as objects from a possible 510. plFiberPlate : 7 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 16 possible sky positions to use as objects from a possible 507. plFiberPlate : 17 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0586.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0587.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0587.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0588.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 113 2 22 93 3 22 96 4 23 109 5 19 101 6 8 56 7 9 44 8 12 96 9 18 92 10 32 142 11 18 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 280 73 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 268 149 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 270 41 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 269 31 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 97 26 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 657 48 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 95 54 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 279 2 plFiberPlate : 93 possible sky positions to use as objects from a possible 524. plFiberPlate : 40 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 15 possible sky positions to use as objects from a possible 520. plFiberPlate : 38 possible sky positions to use as objects from a possible 519. plFiberPlate : 33 possible sky positions to use as objects from a possible 518. plFiberPlate : 49 possible sky positions to use as objects from a possible 517. plFiberPlate : 31 possible sky positions to use as objects from a possible 516. plFiberPlate : 14 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 7 possible sky positions to use as objects from a possible 513. plFiberPlate : 13 possible sky positions to use as objects from a possible 512. plFiberPlate : 9 possible sky positions to use as objects from a possible 511. plFiberPlate : 16 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 61 possible sky positions to use as objects from a possible 508. plFiberPlate : 55 possible sky positions to use as objects from a possible 507. plFiberPlate : 33 possible sky positions to use as objects from a possible 506. plFiberPlate : 22 possible sky positions to use as objects from a possible 505. plFiberPlate : 9 possible sky positions to use as objects from a possible 504. plFiberPlate : 7 possible sky positions to use as objects from a possible 503. plFiberPlate : 13 possible sky positions to use as objects from a possible 502. plFiberPlate : 15 possible sky positions to use as objects from a possible 501. plFiberPlate : 21 possible sky positions to use as objects from a possible 500. plFiberPlate : 37 possible sky positions to use as objects from a possible 499. plFiberPlate : 23 possible sky positions to use as objects from a possible 498. plFiberPlate : 11 possible sky positions to use as objects from a possible 497. plFiberPlate : 4 possible sky positions to use as objects from a possible 496. plFiberPlate : 3 possible sky positions to use as objects from a possible 495. plFiberPlate : 5 possible sky positions to use as objects from a possible 494. plFiberPlate : 8 possible sky positions to use as objects from a possible 493. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0587.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0588.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0588.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0589.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 107 2 25 102 3 28 103 4 23 110 5 17 90 6 10 41 7 12 40 8 21 76 9 22 80 10 36 168 11 22 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 115 10 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 282 45 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 123 58 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 111 26 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 108 40 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 125 25 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 119 45 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 119 16 plFiberPlate : 101 possible sky positions to use as objects from a possible 511. plFiberPlate : 106 possible sky positions to use as objects from a possible 510. plFiberPlate : 51 possible sky positions to use as objects from a possible 509. plFiberPlate : 43 possible sky positions to use as objects from a possible 508. plFiberPlate : 20 possible sky positions to use as objects from a possible 507. plFiberPlate : 12 possible sky positions to use as objects from a possible 506. plFiberPlate : 23 possible sky positions to use as objects from a possible 505. plFiberPlate : 70 possible sky positions to use as objects from a possible 504. plFiberPlate : 43 possible sky positions to use as objects from a possible 503. plFiberPlate : 25 possible sky positions to use as objects from a possible 502. plFiberPlate : 18 possible sky positions to use as objects from a possible 501. plFiberPlate : 15 possible sky positions to use as objects from a possible 500. plFiberPlate : 13 possible sky positions to use as objects from a possible 499. plFiberPlate : 1 possible sky positions to use as objects from a possible 498. plFiberPlate : 9 possible sky positions to use as objects from a possible 497. plFiberPlate : 11 possible sky positions to use as objects from a possible 496. plFiberPlate : 48 possible sky positions to use as objects from a possible 495. plFiberPlate : 27 possible sky positions to use as objects from a possible 494. plFiberPlate : 18 possible sky positions to use as objects from a possible 493. plFiberPlate : 11 possible sky positions to use as objects from a possible 492. plFiberPlate : 14 possible sky positions to use as objects from a possible 491. plFiberPlate : 17 possible sky positions to use as objects from a possible 490. plFiberPlate : 6 possible sky positions to use as objects from a possible 489. plFiberPlate : 10 possible sky positions to use as objects from a possible 488. plFiberPlate : 11 possible sky positions to use as objects from a possible 487. plFiberPlate : 36 possible sky positions to use as objects from a possible 486. plFiberPlate : 26 possible sky positions to use as objects from a possible 485. plFiberPlate : 19 possible sky positions to use as objects from a possible 484. plFiberPlate : 15 possible sky positions to use as objects from a possible 483. plFiberPlate : 10 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0588.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0589.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0589.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0590.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 112 2 34 98 3 29 102 4 31 130 5 36 146 6 19 69 7 11 35 8 16 74 9 24 94 10 45 138 11 29 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 129 118 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 132 135 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 298 96 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 137 126 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 295 62 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 123 58 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 125 25 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 137 6 plFiberPlate : 108 possible sky positions to use as objects from a possible 555. plFiberPlate : 8 possible sky positions to use as objects from a possible 554. plFiberPlate : 2 possible sky positions to use as objects from a possible 553. plFiberPlate : 1 possible sky positions to use as objects from a possible 552. plFiberPlate : 34 possible sky positions to use as objects from a possible 551. plFiberPlate : 19 possible sky positions to use as objects from a possible 550. plFiberPlate : 22 possible sky positions to use as objects from a possible 549. plFiberPlate : 58 possible sky positions to use as objects from a possible 548. plFiberPlate : 4 possible sky positions to use as objects from a possible 547. plFiberPlate : 0 possible sky positions to use as objects from a possible 546. plFiberPlate: No sky found for bundle at 67.290 -34.771, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 546. plFiberPlate: No sky found for bundle at 67.290 -34.771, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 546. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 91.921 -30.116, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 91.921 -30.116, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 91.921 -30.116, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 545. plFiberPlate: No sky found for bundle at 91.921 -30.116, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 545. plFiberPlate : 5 possible sky positions to use as objects from a possible 544. plFiberPlate : 12 possible sky positions to use as objects from a possible 543. plFiberPlate : 5 possible sky positions to use as objects from a possible 542. plFiberPlate : 6 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 58 possible sky positions to use as objects from a possible 539. plFiberPlate : 10 possible sky positions to use as objects from a possible 538. plFiberPlate : 3 possible sky positions to use as objects from a possible 537. plFiberPlate : 7 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 2 possible sky positions to use as objects from a possible 534. plFiberPlate : 7 possible sky positions to use as objects from a possible 533. plFiberPlate : 5 possible sky positions to use as objects from a possible 532. plFiberPlate : 6 possible sky positions to use as objects from a possible 531. plFiberPlate : 9 possible sky positions to use as objects from a possible 530. plFiberPlate : 7 possible sky positions to use as objects from a possible 529. plFiberPlate : 6 possible sky positions to use as objects from a possible 528. plFiberPlate : 1 possible sky positions to use as objects from a possible 527. plFiberPlate : 2 possible sky positions to use as objects from a possible 526. plFiberPlate : 4 possible sky positions to use as objects from a possible 525. plFiberPlate : 3 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0589.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0590.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0590.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0591.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 88 2 1 20 3 5 27 4 15 100 5 19 116 6 9 47 7 8 37 8 20 99 9 18 74 10 18 75 11 15 64 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 311 76 plFiberPlate : adding spectro-photo std with objId = 2190 1 1 310 52 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 146 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 315 53 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 320 85 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 146 58 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 152 27 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 137 6 plFiberPlate : 77 possible sky positions to use as objects from a possible 424. plFiberPlate : 25 possible sky positions to use as objects from a possible 423. plFiberPlate : 19 possible sky positions to use as objects from a possible 422. plFiberPlate : 13 possible sky positions to use as objects from a possible 421. plFiberPlate : 14 possible sky positions to use as objects from a possible 420. plFiberPlate : 9 possible sky positions to use as objects from a possible 419. plFiberPlate : 68 possible sky positions to use as objects from a possible 418. plFiberPlate : 79 possible sky positions to use as objects from a possible 417. plFiberPlate : 28 possible sky positions to use as objects from a possible 416. plFiberPlate : 17 possible sky positions to use as objects from a possible 415. plFiberPlate : 6 possible sky positions to use as objects from a possible 414. plFiberPlate : 5 possible sky positions to use as objects from a possible 413. plFiberPlate : 8 possible sky positions to use as objects from a possible 412. plFiberPlate : 3 possible sky positions to use as objects from a possible 411. plFiberPlate : 8 possible sky positions to use as objects from a possible 410. plFiberPlate : 41 possible sky positions to use as objects from a possible 409. plFiberPlate : 48 possible sky positions to use as objects from a possible 408. plFiberPlate : 28 possible sky positions to use as objects from a possible 407. plFiberPlate : 21 possible sky positions to use as objects from a possible 406. plFiberPlate : 17 possible sky positions to use as objects from a possible 405. plFiberPlate : 3 possible sky positions to use as objects from a possible 404. plFiberPlate : 1 possible sky positions to use as objects from a possible 403. plFiberPlate : 3 possible sky positions to use as objects from a possible 402. plFiberPlate : 4 possible sky positions to use as objects from a possible 401. plFiberPlate : 14 possible sky positions to use as objects from a possible 400. plFiberPlate : 15 possible sky positions to use as objects from a possible 399. plFiberPlate : 7 possible sky positions to use as objects from a possible 398. plFiberPlate : 7 possible sky positions to use as objects from a possible 397. plFiberPlate : 4 possible sky positions to use as objects from a possible 396. plFiberPlate : 5 possible sky positions to use as objects from a possible 395. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 394. plFiberPlate: No sky found for bundle at 86.883 203.962, increase box by 80 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 394. plFiberPlate : 5 possible sky positions to use as objects from a possible 393. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0590.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0591.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0591.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0592.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 85 2 4 22 3 3 24 4 13 69 5 21 84 6 11 34 7 3 35 8 15 88 9 14 63 10 18 81 11 13 66 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 159 50 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 337 117 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 164 16 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 152 27 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 165 74 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 162 16 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 158 30 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 336 4 plFiberPlate : 75 possible sky positions to use as objects from a possible 367. plFiberPlate : 35 possible sky positions to use as objects from a possible 366. plFiberPlate : 10 possible sky positions to use as objects from a possible 365. plFiberPlate : 14 possible sky positions to use as objects from a possible 364. plFiberPlate : 16 possible sky positions to use as objects from a possible 363. plFiberPlate : 3 possible sky positions to use as objects from a possible 362. plFiberPlate : 20 possible sky positions to use as objects from a possible 361. plFiberPlate : 48 possible sky positions to use as objects from a possible 360. plFiberPlate : 35 possible sky positions to use as objects from a possible 359. plFiberPlate : 23 possible sky positions to use as objects from a possible 358. plFiberPlate : 6 possible sky positions to use as objects from a possible 357. plFiberPlate : 4 possible sky positions to use as objects from a possible 356. plFiberPlate : 12 possible sky positions to use as objects from a possible 355. plFiberPlate : 5 possible sky positions to use as objects from a possible 354. plFiberPlate : 3 possible sky positions to use as objects from a possible 353. plFiberPlate : 29 possible sky positions to use as objects from a possible 352. plFiberPlate : 37 possible sky positions to use as objects from a possible 351. plFiberPlate : 35 possible sky positions to use as objects from a possible 350. plFiberPlate : 31 possible sky positions to use as objects from a possible 349. plFiberPlate : 10 possible sky positions to use as objects from a possible 348. plFiberPlate : 7 possible sky positions to use as objects from a possible 347. plFiberPlate : 6 possible sky positions to use as objects from a possible 346. plFiberPlate : 5 possible sky positions to use as objects from a possible 345. plFiberPlate : 3 possible sky positions to use as objects from a possible 344. plFiberPlate : 22 possible sky positions to use as objects from a possible 343. plFiberPlate : 34 possible sky positions to use as objects from a possible 342. plFiberPlate : 25 possible sky positions to use as objects from a possible 341. plFiberPlate : 15 possible sky positions to use as objects from a possible 340. plFiberPlate : 10 possible sky positions to use as objects from a possible 339. plFiberPlate : 13 possible sky positions to use as objects from a possible 338. plFiberPlate : 7 possible sky positions to use as objects from a possible 337. plFiberPlate : 19 possible sky positions to use as objects from a possible 336. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0591.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0592.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0592.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0593.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 72 2 13 21 3 7 20 4 17 67 5 17 77 6 7 48 7 4 33 8 15 80 9 24 88 10 29 92 11 23 64 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 353 68 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 179 76 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 336 214 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 349 215 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 172 8 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 166 51 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 336 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 173 32 plFiberPlate : 86 possible sky positions to use as objects from a possible 354. plFiberPlate : 71 possible sky positions to use as objects from a possible 353. plFiberPlate : 46 possible sky positions to use as objects from a possible 352. plFiberPlate : 33 possible sky positions to use as objects from a possible 351. plFiberPlate : 27 possible sky positions to use as objects from a possible 350. plFiberPlate : 14 possible sky positions to use as objects from a possible 349. plFiberPlate : 16 possible sky positions to use as objects from a possible 348. plFiberPlate : 51 possible sky positions to use as objects from a possible 347. plFiberPlate : 42 possible sky positions to use as objects from a possible 346. plFiberPlate : 32 possible sky positions to use as objects from a possible 345. plFiberPlate : 18 possible sky positions to use as objects from a possible 344. plFiberPlate : 6 possible sky positions to use as objects from a possible 343. plFiberPlate : 14 possible sky positions to use as objects from a possible 342. plFiberPlate : 9 possible sky positions to use as objects from a possible 341. plFiberPlate : 7 possible sky positions to use as objects from a possible 340. plFiberPlate : 5 possible sky positions to use as objects from a possible 339. plFiberPlate : 20 possible sky positions to use as objects from a possible 338. plFiberPlate : 22 possible sky positions to use as objects from a possible 337. plFiberPlate : 21 possible sky positions to use as objects from a possible 336. plFiberPlate : 20 possible sky positions to use as objects from a possible 335. plFiberPlate : 19 possible sky positions to use as objects from a possible 334. plFiberPlate : 14 possible sky positions to use as objects from a possible 333. plFiberPlate : 23 possible sky positions to use as objects from a possible 332. plFiberPlate : 11 possible sky positions to use as objects from a possible 331. plFiberPlate : 5 possible sky positions to use as objects from a possible 330. plFiberPlate : 43 possible sky positions to use as objects from a possible 329. plFiberPlate : 50 possible sky positions to use as objects from a possible 328. plFiberPlate : 37 possible sky positions to use as objects from a possible 327. plFiberPlate : 26 possible sky positions to use as objects from a possible 326. plFiberPlate : 29 possible sky positions to use as objects from a possible 325. plFiberPlate : 14 possible sky positions to use as objects from a possible 324. plFiberPlate : 17 possible sky positions to use as objects from a possible 323. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0592.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0593.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0593.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0594.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 72 2 3 16 3 3 11 4 11 61 5 17 72 6 3 27 7 3 22 8 13 69 9 14 55 10 12 78 11 8 54 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 188 84 plFiberPlate : adding spectro-photo std with objId = 1478 2 2 183 13 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 181 30 plFiberPlate : adding spectro-photo std with objId = 2190 1 5 365 57 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 188 75 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 198 21 plFiberPlate : adding spectro-photo std with objId = 1478 2 4 195 48 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 185 261 plFiberPlate : 75 possible sky positions to use as objects from a possible 306. plFiberPlate : 59 possible sky positions to use as objects from a possible 305. plFiberPlate : 24 possible sky positions to use as objects from a possible 304. plFiberPlate : 13 possible sky positions to use as objects from a possible 303. plFiberPlate : 23 possible sky positions to use as objects from a possible 302. plFiberPlate : 17 possible sky positions to use as objects from a possible 301. plFiberPlate : 17 possible sky positions to use as objects from a possible 300. plFiberPlate : 60 possible sky positions to use as objects from a possible 299. plFiberPlate : 48 possible sky positions to use as objects from a possible 298. plFiberPlate : 37 possible sky positions to use as objects from a possible 297. plFiberPlate : 21 possible sky positions to use as objects from a possible 296. plFiberPlate : 8 possible sky positions to use as objects from a possible 295. plFiberPlate : 5 possible sky positions to use as objects from a possible 294. plFiberPlate : 11 possible sky positions to use as objects from a possible 293. plFiberPlate : 13 possible sky positions to use as objects from a possible 292. plFiberPlate : 11 possible sky positions to use as objects from a possible 291. plFiberPlate : 40 possible sky positions to use as objects from a possible 290. plFiberPlate : 41 possible sky positions to use as objects from a possible 289. plFiberPlate : 33 possible sky positions to use as objects from a possible 288. plFiberPlate : 18 possible sky positions to use as objects from a possible 287. plFiberPlate : 6 possible sky positions to use as objects from a possible 286. plFiberPlate : 0 possible sky positions to use as objects from a possible 285. plFiberPlate: No sky found for bundle at 53.627 53.275, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 285. plFiberPlate: No sky found for bundle at 53.627 53.275, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 285. plFiberPlate : 6 possible sky positions to use as objects from a possible 284. plFiberPlate : 8 possible sky positions to use as objects from a possible 283. plFiberPlate : 8 possible sky positions to use as objects from a possible 282. plFiberPlate : 24 possible sky positions to use as objects from a possible 281. plFiberPlate : 24 possible sky positions to use as objects from a possible 280. plFiberPlate : 18 possible sky positions to use as objects from a possible 279. plFiberPlate : 9 possible sky positions to use as objects from a possible 278. plFiberPlate : 8 possible sky positions to use as objects from a possible 277. plFiberPlate : 9 possible sky positions to use as objects from a possible 276. plFiberPlate : 11 possible sky positions to use as objects from a possible 275. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0593.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0594.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0594.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.4.2/plPlugMapP-0595.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 143 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 85 to list of science objects plFiberPlate : adding sky number 147 to list of science objects plFiberPlate : adding sky number 260 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 191 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 22 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 260 to list of science objects plFiberPlate : adding sky number 141 to list of science objects plFiberPlate : adding sky number 201 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 200 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 213 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 160 to list of science objects plFiberPlate : adding sky number 80 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 101 to list of science objects plFiberPlate : adding sky number 152 to list of science objects plFiberPlate : adding sky number 196 to list of science objects plFiberPlate : adding sky number 231 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 214 to list of science objects plFiberPlate : adding sky number 165 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 141 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 86 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 110 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 180 to list of science objects plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 6 to list of science objects plFiberPlate : adding sky number 72 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 54 to list of science objects plFiberPlate : adding sky number 132 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 212 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 62 2 7 21 3 4 14 4 12 57 5 13 41 6 2 4 7 2 7 8 11 42 9 9 42 10 15 54 11 14 46 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1478 2 5 204 192 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 391 79 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 392 48 plFiberPlate : adding spectro-photo std with objId = 2190 1 2 385 64 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 381 170 plFiberPlate : adding spectro-photo std with objId = 2190 1 4 380 6 plFiberPlate : adding spectro-photo std with objId = 1478 2 3 205 181 plFiberPlate : adding spectro-photo std with objId = 2190 1 3 388 10 plFiberPlate : 52 possible sky positions to use as objects from a possible 220. plFiberPlate : 29 possible sky positions to use as objects from a possible 219. plFiberPlate : 12 possible sky positions to use as objects from a possible 218. plFiberPlate : 9 possible sky positions to use as objects from a possible 217. plFiberPlate : 12 possible sky positions to use as objects from a possible 216. plFiberPlate : 9 possible sky positions to use as objects from a possible 215. plFiberPlate : 24 possible sky positions to use as objects from a possible 214. plFiberPlate : 28 possible sky positions to use as objects from a possible 213. plFiberPlate : 23 possible sky positions to use as objects from a possible 212. plFiberPlate : 15 possible sky positions to use as objects from a possible 211. plFiberPlate : 6 possible sky positions to use as objects from a possible 210. plFiberPlate : 5 possible sky positions to use as objects from a possible 209. plFiberPlate : 2 possible sky positions to use as objects from a possible 208. plFiberPlate : 1 possible sky positions to use as objects from a possible 207. plFiberPlate : 14 possible sky positions to use as objects from a possible 206. plFiberPlate : 4 possible sky positions to use as objects from a possible 205. plFiberPlate : 25 possible sky positions to use as objects from a possible 204. plFiberPlate : 19 possible sky positions to use as objects from a possible 203. plFiberPlate : 12 possible sky positions to use as objects from a possible 202. plFiberPlate : 8 possible sky positions to use as objects from a possible 201. plFiberPlate : 6 possible sky positions to use as objects from a possible 200. plFiberPlate : 9 possible sky positions to use as objects from a possible 199. plFiberPlate : 3 possible sky positions to use as objects from a possible 198. plFiberPlate : 7 possible sky positions to use as objects from a possible 197. plFiberPlate : 2 possible sky positions to use as objects from a possible 196. plFiberPlate : 19 possible sky positions to use as objects from a possible 195. plFiberPlate : 16 possible sky positions to use as objects from a possible 194. plFiberPlate : 7 possible sky positions to use as objects from a possible 193. plFiberPlate : 4 possible sky positions to use as objects from a possible 192. plFiberPlate : 10 possible sky positions to use as objects from a possible 191. plFiberPlate : 8 possible sky positions to use as objects from a possible 190. plFiberPlate : 8 possible sky positions to use as objects from a possible 189. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0594.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0595.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.4.2/plOverlay-0595.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Apr 9 10:53:52 CDT 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v9_3/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v9_3 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 14 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0582.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0582.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0582.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0583.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.8239,4.7835) and (-12.31,2.19) plMakeFanucCodes : fixed path between (10.4286,-7.3893) and (11.37,-5.62) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0583.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0583.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0584.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.3215,-9.4842) and (6.54,-10.91) plMakeFanucCodes : fixed path between (-7.2480,10.4788) and (-6.29,11.14) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0584.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0584.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0585.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0742,-4.2467) and (-12.41,-2.46) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0585.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0585.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0586.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0586.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0586.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0587.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0587.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0587.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0588.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.6531,5.0264) and (12.09,3.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0588.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0588.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0589.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0589.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0589.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0590.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.7857,6.6188) and (-12.32,2.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0590.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0590.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0591.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0591.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0591.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0592.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.8113,8.1703) and (-10.43,7.31) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0592.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0592.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0593.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0593.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0593.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0594.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0594.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0594.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0595.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5027,5.4599) and (-11.99,4.42) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0595.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.4.2/plFanuc-0595.par plMakeFanucCodes : temperature difference 8.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00018691 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Apr 9 10:54:35 CDT 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v9_3/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v9_3 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140dba068 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 14 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 582 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 583 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 584 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 585 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 586 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 587 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 588 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 589 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 590 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 591 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 592 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 593 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 594 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 595 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 11.2 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Apr 9 10:54:55 CDT 2001 Begin running plateEnder dr2001.4.2 -morePipes 1 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v9_3/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v9_3 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2001.4.2 -morePipes 1 failed. PS: Read file for stderr output of this job.