Sender: LSF System Subject: Job 28851: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Jun 1 13:55:40 2001 Results reported at Fri Jun 1 13:58:18 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /usr/local/etc/fermi.shrc ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v10_7 -f OSF1 -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.6 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 140.85 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Fri Jun 1 13:55:42 CDT 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Jun 1 13:55:43 CDT 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/encp/v2_4:/p/OSF1/ktools/v1_4/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/p/OSF1/ups/v4_4a/bin:/home/s1/jen_a/bin:/usr/sbin:/usr/ccs/bin:/bin:/usr/bin:/usr/lbin:/usr/ucb:/etc:/usr/bin/X11:/usr/local/bin:.:/p/OSF1/ssc/v4_6/bin:/p/OSF1/astrom/v3_3/bin:/p/OSF1/photo/v5_2_21/bin:/p/OSF1/mt/v7_2/bin:/p/OSF1/ghostview/v4_0b/bin:/p/OSF1/dp/v10_7/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_10/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/dervish/v7_15/bin:/p/OSF1/sdssmath/v5_0/bin:/p/OSF1/astrotools/v5_2/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Fri Jun 1 13:55:43 CDT 2001 ASTROM_DIR=/p/OSF1/astrom/v3_3 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_2 DERVISH_DIR=/p/OSF1/dervish/v7_15 DP_DIR=/p/OSF1/dp/v10_7 ENCP_DIR=/p/OSF1/encp/v2_4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INT_DIR=/p/OSF1/dervish/v7_15/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_1 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_2 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_7_8 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_21 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_0 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_10 SETUPS_DIR=/usr/local/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_6 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/data/dp3.b/data/ucac/v0_7 UPS_DIR=/p/OSF1/ups/v4_4a --------------------------------------------------------------- Fri Jun 1 13:55:44 CDT 2001 Begin running plate --------------------------------------------------------------- Fri Jun 1 13:55:44 CDT 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v10_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v10_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140dca668 makePlates : beginning loop over plObs chain; makePlates : making 11 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0435.par makePlates : plateInfo struct for plate 634 : (h2).mjd 52142 (h2).raCen 309.8841 (h2).decCen -5.849593 (h2).haCen -24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 309.884 -5.850 309.884 -4.350 plMakePlateFromTile : mjd of obs : 52142.583668 Observed HA/dec of plate center, fiducial point (deg) : -24.002 -5.829 -24.002 -4.330 The rotation angle of the fid. point is 29.015389 plMakePlateFromTile : beginning loop over 1091 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0434.par makePlates : plateInfo struct for plate 635 : (h2).mjd 52142 (h2).raCen 311.8032 (h2).decCen -5.938691 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 311.803 -5.939 311.803 -4.439 plMakePlateFromTile : mjd of obs : 52142.583442 Observed HA/dec of plate center, fiducial point (deg) : -26.002 -5.918 -26.002 -4.418 The rotation angle of the fid. point is 30.879184 plMakePlateFromTile : beginning loop over 1217 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0433.par makePlates : plateInfo struct for plate 636 : (h2).mjd 52142 (h2).raCen 313.7545 (h2).decCen -6.30609 (h2).haCen -13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 313.755 -6.306 313.755 -4.806 plMakePlateFromTile : mjd of obs : 52142.624873 Observed HA/dec of plate center, fiducial point (deg) : -13.002 -6.286 -13.002 -4.787 The rotation angle of the fid. point is 16.764679 plMakePlateFromTile : beginning loop over 1266 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0432.par makePlates : plateInfo struct for plate 637 : (h2).mjd 52142 (h2).raCen 315.531 (h2).decCen -6.552137 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 315.531 -6.552 315.531 -5.052 plMakePlateFromTile : mjd of obs : 52142.624252 Observed HA/dec of plate center, fiducial point (deg) : -15.002 -6.532 -15.002 -5.032 The rotation angle of the fid. point is 19.048740 plMakePlateFromTile : beginning loop over 1370 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (105.93, 158.69, 5.8) and (105.71, 158.55, 7.4) checkLTHo : distance = 0.258, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(105.71, 158.55, 7.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0431.par makePlates : plateInfo struct for plate 638 : (h2).mjd 52142 (h2).raCen 317.3919 (h2).decCen -6.785128 (h2).haCen -17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 317.392 -6.785 317.392 -5.285 plMakePlateFromTile : mjd of obs : 52142.623865 Observed HA/dec of plate center, fiducial point (deg) : -17.002 -6.764 -17.002 -5.265 The rotation angle of the fid. point is 21.244997 plMakePlateFromTile : beginning loop over 1400 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0430.par makePlates : plateInfo struct for plate 639 : (h2).mjd 52142 (h2).raCen 319.4837 (h2).decCen -7.080215 (h2).haCen -4 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 319.484 -7.080 319.484 -5.580 plMakePlateFromTile : mjd of obs : 52142.665684 Observed HA/dec of plate center, fiducial point (deg) : -4.002 -7.059 -4.002 -5.560 The rotation angle of the fid. point is 5.231579 plMakePlateFromTile : beginning loop over 1428 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0429.par makePlates : plateInfo struct for plate 640 : (h2).mjd 52142 (h2).raCen 321.2328 (h2).decCen -7.243572 (h2).haCen -6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 321.233 -7.244 321.233 -5.744 plMakePlateFromTile : mjd of obs : 52142.664987 Observed HA/dec of plate center, fiducial point (deg) : -6.002 -7.222 -6.002 -5.723 The rotation angle of the fid. point is 7.791434 plMakePlateFromTile : beginning loop over 1446 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-55.32, 143.39, 8.3) and (-58.56, 143.53, 7.7) checkLTHo : distance = 3.248, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-55.32, 143.39, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0428.par makePlates : plateInfo struct for plate 641 : (h2).mjd 52142 (h2).raCen 323.0767 (h2).decCen -7.512009 (h2).haCen -8 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 323.077 -7.512 323.077 -6.012 plMakePlateFromTile : mjd of obs : 52142.664553 Observed HA/dec of plate center, fiducial point (deg) : -8.002 -7.491 -8.002 -5.991 The rotation angle of the fid. point is 10.277474 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0427.par makePlates : plateInfo struct for plate 642 : (h2).mjd 52142 (h2).raCen 324.4863 (h2).decCen -7.719926 (h2).haCen -9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 324.486 -7.720 324.486 -6.220 plMakePlateFromTile : mjd of obs : 52142.665687 Observed HA/dec of plate center, fiducial point (deg) : -9.002 -7.698 -9.002 -6.199 The rotation angle of the fid. point is 11.478033 plMakePlateFromTile : beginning loop over 1376 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0426.par makePlates : plateInfo struct for plate 643 : (h2).mjd 52142 (h2).raCen 325.9021 (h2).decCen -7.810019 (h2).haCen -10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 325.902 -7.810 325.902 -6.310 plMakePlateFromTile : mjd of obs : 52142.666837 Observed HA/dec of plate center, fiducial point (deg) : -10.002 -7.788 -10.002 -6.289 The rotation angle of the fid. point is 12.686299 plMakePlateFromTile : beginning loop over 1354 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk19/complete//plPlugMapT-0425.par makePlates : plateInfo struct for plate 644 : (h2).mjd 52142 (h2).raCen 327.7215 (h2).decCen -7.956213 (h2).haCen -12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 327.721 -7.956 327.721 -6.456 plMakePlateFromTile : mjd of obs : 52142.666335 Observed HA/dec of plate center, fiducial point (deg) : -12.002 -7.934 -12.002 -6.435 The rotation angle of the fid. point is 15.059867 plMakePlateFromTile : beginning loop over 1207 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Jun 1 13:56:15 CDT 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v10_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v10_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 11 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0634.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 53 2 24 38 3 21 26 4 25 25 5 16 22 6 10 21 7 19 30 8 19 55 9 19 34 10 47 60 11 30 48 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 22 162 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 33 69 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 26 15 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 16 99 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 23 126 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 23 121 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 11 314 plFiberPlate : adding spectro-photo std with objId = 1737 0 4 17 49 plFiberPlate : 35 possible sky positions to use as objects from a possible 201. plFiberPlate : 32 possible sky positions to use as objects from a possible 200. plFiberPlate : 23 possible sky positions to use as objects from a possible 199. plFiberPlate : 12 possible sky positions to use as objects from a possible 198. plFiberPlate : 11 possible sky positions to use as objects from a possible 197. plFiberPlate : 22 possible sky positions to use as objects from a possible 196. plFiberPlate : 24 possible sky positions to use as objects from a possible 195. plFiberPlate : 18 possible sky positions to use as objects from a possible 194. plFiberPlate : 14 possible sky positions to use as objects from a possible 193. plFiberPlate : 11 possible sky positions to use as objects from a possible 192. plFiberPlate : 5 possible sky positions to use as objects from a possible 191. plFiberPlate : 7 possible sky positions to use as objects from a possible 190. plFiberPlate : 1 possible sky positions to use as objects from a possible 189. plFiberPlate : 4 possible sky positions to use as objects from a possible 188. plFiberPlate : 13 possible sky positions to use as objects from a possible 187. plFiberPlate : 3 possible sky positions to use as objects from a possible 186. plFiberPlate : 18 possible sky positions to use as objects from a possible 185. plFiberPlate : 16 possible sky positions to use as objects from a possible 184. plFiberPlate : 14 possible sky positions to use as objects from a possible 183. plFiberPlate : 10 possible sky positions to use as objects from a possible 182. plFiberPlate : 8 possible sky positions to use as objects from a possible 181. plFiberPlate : 0 possible sky positions to use as objects from a possible 180. plFiberPlate: No sky found for bundle at 50.830 88.751, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 180. plFiberPlate : 2 possible sky positions to use as objects from a possible 179. plFiberPlate : 13 possible sky positions to use as objects from a possible 178. plFiberPlate : 16 possible sky positions to use as objects from a possible 177. plFiberPlate : 5 possible sky positions to use as objects from a possible 176. plFiberPlate : 5 possible sky positions to use as objects from a possible 175. plFiberPlate : 1 possible sky positions to use as objects from a possible 174. plFiberPlate : 2 possible sky positions to use as objects from a possible 173. plFiberPlate : 1 possible sky positions to use as objects from a possible 172. plFiberPlate : 3 possible sky positions to use as objects from a possible 171. plFiberPlate : 9 possible sky positions to use as objects from a possible 170. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0634.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0634.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0635.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 64 2 31 47 3 25 51 4 27 55 5 28 59 6 15 32 7 10 27 8 21 57 9 19 54 10 39 81 11 21 50 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1737 0 2 34 52 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 32 92 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 22 105 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 23 126 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 50 82 plFiberPlate : adding spectro-photo std with objId = 1659 1 6 51 13 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 24 255 plFiberPlate : adding spectro-photo std with objId = 1737 0 5 34 32 plFiberPlate : 68 possible sky positions to use as objects from a possible 288. plFiberPlate : 36 possible sky positions to use as objects from a possible 287. plFiberPlate : 18 possible sky positions to use as objects from a possible 286. plFiberPlate : 19 possible sky positions to use as objects from a possible 285. plFiberPlate : 7 possible sky positions to use as objects from a possible 284. plFiberPlate : 15 possible sky positions to use as objects from a possible 283. plFiberPlate : 14 possible sky positions to use as objects from a possible 282. plFiberPlate : 27 possible sky positions to use as objects from a possible 281. plFiberPlate : 19 possible sky positions to use as objects from a possible 280. plFiberPlate : 9 possible sky positions to use as objects from a possible 279. plFiberPlate : 6 possible sky positions to use as objects from a possible 278. plFiberPlate : 2 possible sky positions to use as objects from a possible 277. plFiberPlate : 4 possible sky positions to use as objects from a possible 276. plFiberPlate : 5 possible sky positions to use as objects from a possible 275. plFiberPlate : 16 possible sky positions to use as objects from a possible 274. plFiberPlate : 9 possible sky positions to use as objects from a possible 273. plFiberPlate : 37 possible sky positions to use as objects from a possible 272. plFiberPlate : 34 possible sky positions to use as objects from a possible 271. plFiberPlate : 16 possible sky positions to use as objects from a possible 270. plFiberPlate : 12 possible sky positions to use as objects from a possible 269. plFiberPlate : 8 possible sky positions to use as objects from a possible 268. plFiberPlate : 9 possible sky positions to use as objects from a possible 267. plFiberPlate : 8 possible sky positions to use as objects from a possible 266. plFiberPlate : 19 possible sky positions to use as objects from a possible 265. plFiberPlate : 4 possible sky positions to use as objects from a possible 264. plFiberPlate : 29 possible sky positions to use as objects from a possible 263. plFiberPlate : 12 possible sky positions to use as objects from a possible 262. plFiberPlate : 10 possible sky positions to use as objects from a possible 261. plFiberPlate : 6 possible sky positions to use as objects from a possible 260. plFiberPlate : 7 possible sky positions to use as objects from a possible 259. plFiberPlate : 3 possible sky positions to use as objects from a possible 258. plFiberPlate : 5 possible sky positions to use as objects from a possible 257. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0634.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0635.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0635.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0636.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 91 2 27 59 3 22 35 4 27 48 5 33 88 6 24 52 7 19 44 8 19 66 9 21 65 10 36 91 11 28 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 1 2 55 222 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 52 180 plFiberPlate : adding spectro-photo std with objId = 1737 0 2 44 67 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 53 15 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 50 82 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 36 173 plFiberPlate : adding spectro-photo std with objId = 1659 1 6 58 138 plFiberPlate : adding spectro-photo std with objId = 1737 0 5 43 114 plFiberPlate : 54 possible sky positions to use as objects from a possible 362. plFiberPlate : 43 possible sky positions to use as objects from a possible 361. plFiberPlate : 32 possible sky positions to use as objects from a possible 360. plFiberPlate : 25 possible sky positions to use as objects from a possible 359. plFiberPlate : 24 possible sky positions to use as objects from a possible 358. plFiberPlate : 24 possible sky positions to use as objects from a possible 357. plFiberPlate : 31 possible sky positions to use as objects from a possible 356. plFiberPlate : 47 possible sky positions to use as objects from a possible 355. plFiberPlate : 23 possible sky positions to use as objects from a possible 354. plFiberPlate : 16 possible sky positions to use as objects from a possible 353. plFiberPlate : 8 possible sky positions to use as objects from a possible 352. plFiberPlate : 7 possible sky positions to use as objects from a possible 351. plFiberPlate : 18 possible sky positions to use as objects from a possible 350. plFiberPlate : 8 possible sky positions to use as objects from a possible 349. plFiberPlate : 10 possible sky positions to use as objects from a possible 348. plFiberPlate : 9 possible sky positions to use as objects from a possible 347. plFiberPlate : 57 possible sky positions to use as objects from a possible 346. plFiberPlate : 36 possible sky positions to use as objects from a possible 345. plFiberPlate : 9 possible sky positions to use as objects from a possible 344. plFiberPlate : 3 possible sky positions to use as objects from a possible 343. plFiberPlate : 10 possible sky positions to use as objects from a possible 342. plFiberPlate : 7 possible sky positions to use as objects from a possible 341. plFiberPlate : 9 possible sky positions to use as objects from a possible 340. plFiberPlate : 10 possible sky positions to use as objects from a possible 339. plFiberPlate : 8 possible sky positions to use as objects from a possible 338. plFiberPlate : 37 possible sky positions to use as objects from a possible 337. plFiberPlate : 18 possible sky positions to use as objects from a possible 336. plFiberPlate : 8 possible sky positions to use as objects from a possible 335. plFiberPlate : 4 possible sky positions to use as objects from a possible 334. plFiberPlate : 4 possible sky positions to use as objects from a possible 333. plFiberPlate : 9 possible sky positions to use as objects from a possible 332. plFiberPlate : 5 possible sky positions to use as objects from a possible 331. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0635.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0636.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0636.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0637.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 93 2 21 52 3 19 56 4 40 95 5 41 100 6 26 69 7 22 50 8 17 81 9 23 78 10 34 109 11 27 76 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 59 160 plFiberPlate : adding spectro-photo std with objId = 1659 1 6 65 93 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 67 159 plFiberPlate : adding spectro-photo std with objId = 1659 1 6 67 127 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 62 10 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 53 171 plFiberPlate : adding spectro-photo std with objId = 1659 1 2 76 20 plFiberPlate : adding spectro-photo std with objId = 1659 1 3 77 2 plFiberPlate : 86 possible sky positions to use as objects from a possible 451. plFiberPlate : 52 possible sky positions to use as objects from a possible 450. plFiberPlate : 30 possible sky positions to use as objects from a possible 449. plFiberPlate : 19 possible sky positions to use as objects from a possible 448. plFiberPlate : 10 possible sky positions to use as objects from a possible 447. plFiberPlate : 12 possible sky positions to use as objects from a possible 446. plFiberPlate : 31 possible sky positions to use as objects from a possible 445. plFiberPlate : 97 possible sky positions to use as objects from a possible 444. plFiberPlate : 39 possible sky positions to use as objects from a possible 443. plFiberPlate : 25 possible sky positions to use as objects from a possible 442. plFiberPlate : 19 possible sky positions to use as objects from a possible 441. plFiberPlate : 9 possible sky positions to use as objects from a possible 440. plFiberPlate : 8 possible sky positions to use as objects from a possible 439. plFiberPlate : 12 possible sky positions to use as objects from a possible 438. plFiberPlate : 11 possible sky positions to use as objects from a possible 437. plFiberPlate : 23 possible sky positions to use as objects from a possible 436. plFiberPlate : 86 possible sky positions to use as objects from a possible 435. plFiberPlate : 23 possible sky positions to use as objects from a possible 434. plFiberPlate : 9 possible sky positions to use as objects from a possible 433. plFiberPlate : 7 possible sky positions to use as objects from a possible 432. plFiberPlate : 10 possible sky positions to use as objects from a possible 431. plFiberPlate : 5 possible sky positions to use as objects from a possible 430. plFiberPlate : 12 possible sky positions to use as objects from a possible 429. plFiberPlate : 16 possible sky positions to use as objects from a possible 428. plFiberPlate : 20 possible sky positions to use as objects from a possible 427. plFiberPlate : 62 possible sky positions to use as objects from a possible 426. plFiberPlate : 22 possible sky positions to use as objects from a possible 425. plFiberPlate : 9 possible sky positions to use as objects from a possible 424. plFiberPlate : 11 possible sky positions to use as objects from a possible 423. plFiberPlate : 3 possible sky positions to use as objects from a possible 422. plFiberPlate : 11 possible sky positions to use as objects from a possible 421. plFiberPlate : 13 possible sky positions to use as objects from a possible 420. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0636.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0637.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0637.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0638.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 102 2 21 83 3 23 70 4 31 95 5 23 100 6 12 73 7 9 59 8 10 87 9 19 94 10 55 139 11 28 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 73 32 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 87 31 plFiberPlate : adding spectro-photo std with objId = 1659 1 5 87 301 plFiberPlate : adding spectro-photo std with objId = 1659 1 3 77 2 plFiberPlate : adding spectro-photo std with objId = 1659 1 2 76 20 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 73 113 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 73 90 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 68 132 plFiberPlate : 105 possible sky positions to use as objects from a possible 482. plFiberPlate : 70 possible sky positions to use as objects from a possible 481. plFiberPlate : 37 possible sky positions to use as objects from a possible 480. plFiberPlate : 17 possible sky positions to use as objects from a possible 479. plFiberPlate : 32 possible sky positions to use as objects from a possible 478. plFiberPlate : 47 possible sky positions to use as objects from a possible 477. plFiberPlate : 34 possible sky positions to use as objects from a possible 476. plFiberPlate : 60 possible sky positions to use as objects from a possible 475. plFiberPlate : 49 possible sky positions to use as objects from a possible 474. plFiberPlate : 10 possible sky positions to use as objects from a possible 473. plFiberPlate : 16 possible sky positions to use as objects from a possible 472. plFiberPlate : 9 possible sky positions to use as objects from a possible 471. plFiberPlate : 14 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 12 possible sky positions to use as objects from a possible 468. plFiberPlate : 4 possible sky positions to use as objects from a possible 467. plFiberPlate : 52 possible sky positions to use as objects from a possible 466. plFiberPlate : 48 possible sky positions to use as objects from a possible 465. plFiberPlate : 15 possible sky positions to use as objects from a possible 464. plFiberPlate : 8 possible sky positions to use as objects from a possible 463. plFiberPlate : 5 possible sky positions to use as objects from a possible 462. plFiberPlate : 9 possible sky positions to use as objects from a possible 461. plFiberPlate : 5 possible sky positions to use as objects from a possible 460. plFiberPlate : 15 possible sky positions to use as objects from a possible 459. plFiberPlate : 10 possible sky positions to use as objects from a possible 458. plFiberPlate : 40 possible sky positions to use as objects from a possible 457. plFiberPlate : 22 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 12 possible sky positions to use as objects from a possible 454. plFiberPlate : 12 possible sky positions to use as objects from a possible 453. plFiberPlate : 10 possible sky positions to use as objects from a possible 452. plFiberPlate : 3 possible sky positions to use as objects from a possible 451. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0637.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0638.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0638.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0639.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 100 2 12 64 3 17 60 4 26 103 5 16 117 6 10 72 7 15 60 8 15 88 9 8 94 10 25 124 11 24 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 93 270 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 87 230 plFiberPlate : adding spectro-photo std with objId = 1659 1 5 103 47 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 77 106 plFiberPlate : adding spectro-photo std with objId = 1737 0 5 89 309 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 73 113 plFiberPlate : adding spectro-photo std with objId = 1659 1 5 102 267 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 76 69 plFiberPlate : 89 possible sky positions to use as objects from a possible 495. plFiberPlate : 48 possible sky positions to use as objects from a possible 494. plFiberPlate : 24 possible sky positions to use as objects from a possible 493. plFiberPlate : 15 possible sky positions to use as objects from a possible 492. plFiberPlate : 18 possible sky positions to use as objects from a possible 491. plFiberPlate : 23 possible sky positions to use as objects from a possible 490. plFiberPlate : 38 possible sky positions to use as objects from a possible 489. plFiberPlate : 80 possible sky positions to use as objects from a possible 488. plFiberPlate : 29 possible sky positions to use as objects from a possible 487. plFiberPlate : 15 possible sky positions to use as objects from a possible 486. plFiberPlate : 7 possible sky positions to use as objects from a possible 485. plFiberPlate : 11 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 27 possible sky positions to use as objects from a possible 482. plFiberPlate : 7 possible sky positions to use as objects from a possible 481. plFiberPlate : 6 possible sky positions to use as objects from a possible 480. plFiberPlate : 71 possible sky positions to use as objects from a possible 479. plFiberPlate : 20 possible sky positions to use as objects from a possible 478. plFiberPlate : 14 possible sky positions to use as objects from a possible 477. plFiberPlate : 4 possible sky positions to use as objects from a possible 476. plFiberPlate : 18 possible sky positions to use as objects from a possible 475. plFiberPlate : 9 possible sky positions to use as objects from a possible 474. plFiberPlate : 8 possible sky positions to use as objects from a possible 473. plFiberPlate : 8 possible sky positions to use as objects from a possible 472. plFiberPlate : 5 possible sky positions to use as objects from a possible 471. plFiberPlate : 39 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 4 possible sky positions to use as objects from a possible 468. plFiberPlate : 12 possible sky positions to use as objects from a possible 467. plFiberPlate : 7 possible sky positions to use as objects from a possible 466. plFiberPlate : 16 possible sky positions to use as objects from a possible 465. plFiberPlate : 9 possible sky positions to use as objects from a possible 464. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0638.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0639.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0639.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0640.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 108 2 22 77 3 18 76 4 23 108 5 20 116 6 19 67 7 16 58 8 15 88 9 17 88 10 35 129 11 26 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 1 3 100 249 plFiberPlate : adding spectro-photo std with objId = 1659 1 2 114 109 plFiberPlate : adding spectro-photo std with objId = 1737 0 2 95 91 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 84 281 plFiberPlate : adding spectro-photo std with objId = 1659 1 2 98 231 plFiberPlate : adding spectro-photo std with objId = 1659 1 6 107 77 plFiberPlate : adding spectro-photo std with objId = 1737 0 4 97 102 plFiberPlate : adding spectro-photo std with objId = 1659 1 5 102 267 plFiberPlate : 113 possible sky positions to use as objects from a possible 496. plFiberPlate : 43 possible sky positions to use as objects from a possible 495. plFiberPlate : 30 possible sky positions to use as objects from a possible 494. plFiberPlate : 14 possible sky positions to use as objects from a possible 493. plFiberPlate : 19 possible sky positions to use as objects from a possible 492. plFiberPlate : 26 possible sky positions to use as objects from a possible 491. plFiberPlate : 51 possible sky positions to use as objects from a possible 490. plFiberPlate : 69 possible sky positions to use as objects from a possible 489. plFiberPlate : 13 possible sky positions to use as objects from a possible 488. plFiberPlate : 11 possible sky positions to use as objects from a possible 487. plFiberPlate : 5 possible sky positions to use as objects from a possible 486. plFiberPlate : 3 possible sky positions to use as objects from a possible 485. plFiberPlate : 11 possible sky positions to use as objects from a possible 484. plFiberPlate : 8 possible sky positions to use as objects from a possible 483. plFiberPlate : 16 possible sky positions to use as objects from a possible 482. plFiberPlate : 10 possible sky positions to use as objects from a possible 481. plFiberPlate : 58 possible sky positions to use as objects from a possible 480. plFiberPlate : 5 possible sky positions to use as objects from a possible 479. plFiberPlate : 1 possible sky positions to use as objects from a possible 478. plFiberPlate : 2 possible sky positions to use as objects from a possible 477. plFiberPlate : 3 possible sky positions to use as objects from a possible 476. plFiberPlate : 7 possible sky positions to use as objects from a possible 475. plFiberPlate : 4 possible sky positions to use as objects from a possible 474. plFiberPlate : 9 possible sky positions to use as objects from a possible 473. plFiberPlate : 19 possible sky positions to use as objects from a possible 472. plFiberPlate : 60 possible sky positions to use as objects from a possible 471. plFiberPlate : 23 possible sky positions to use as objects from a possible 470. plFiberPlate : 18 possible sky positions to use as objects from a possible 469. plFiberPlate : 6 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 15 possible sky positions to use as objects from a possible 466. plFiberPlate : 11 possible sky positions to use as objects from a possible 465. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0639.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0640.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0640.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0641.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 96 2 11 57 3 17 60 4 39 105 5 25 131 6 15 88 7 12 61 8 13 87 9 15 96 10 37 118 11 24 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 123 48 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 103 8 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 122 178 plFiberPlate : adding spectro-photo std with objId = 1659 1 2 114 109 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 104 137 plFiberPlate : adding spectro-photo std with objId = 1659 1 5 112 91 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 126 91 plFiberPlate : adding spectro-photo std with objId = 1737 0 5 105 73 plFiberPlate : 85 possible sky positions to use as objects from a possible 501. plFiberPlate : 19 possible sky positions to use as objects from a possible 500. plFiberPlate : 10 possible sky positions to use as objects from a possible 499. plFiberPlate : 6 possible sky positions to use as objects from a possible 498. plFiberPlate : 16 possible sky positions to use as objects from a possible 497. plFiberPlate : 9 possible sky positions to use as objects from a possible 496. plFiberPlate : 40 possible sky positions to use as objects from a possible 495. plFiberPlate : 71 possible sky positions to use as objects from a possible 494. plFiberPlate : 24 possible sky positions to use as objects from a possible 493. plFiberPlate : 16 possible sky positions to use as objects from a possible 492. plFiberPlate : 11 possible sky positions to use as objects from a possible 491. plFiberPlate : 10 possible sky positions to use as objects from a possible 490. plFiberPlate : 21 possible sky positions to use as objects from a possible 489. plFiberPlate : 10 possible sky positions to use as objects from a possible 488. plFiberPlate : 9 possible sky positions to use as objects from a possible 487. plFiberPlate : 21 possible sky positions to use as objects from a possible 486. plFiberPlate : 96 possible sky positions to use as objects from a possible 485. plFiberPlate : 19 possible sky positions to use as objects from a possible 484. plFiberPlate : 17 possible sky positions to use as objects from a possible 483. plFiberPlate : 7 possible sky positions to use as objects from a possible 482. plFiberPlate : 17 possible sky positions to use as objects from a possible 481. plFiberPlate : 13 possible sky positions to use as objects from a possible 480. plFiberPlate : 11 possible sky positions to use as objects from a possible 479. plFiberPlate : 7 possible sky positions to use as objects from a possible 478. plFiberPlate : 12 possible sky positions to use as objects from a possible 477. plFiberPlate : 63 possible sky positions to use as objects from a possible 476. plFiberPlate : 13 possible sky positions to use as objects from a possible 475. plFiberPlate : 9 possible sky positions to use as objects from a possible 474. plFiberPlate : 4 possible sky positions to use as objects from a possible 473. plFiberPlate : 15 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 6 possible sky positions to use as objects from a possible 470. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0640.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0641.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0641.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0642.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 75 2 12 57 3 15 75 4 32 114 5 33 127 6 26 84 7 13 67 8 8 78 9 19 117 10 32 144 11 19 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 125 80 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 122 178 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 120 105 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 114 60 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 126 91 plFiberPlate : adding spectro-photo std with objId = 1737 0 5 118 46 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 119 128 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 116 75 plFiberPlate : 121 possible sky positions to use as objects from a possible 513. plFiberPlate : 37 possible sky positions to use as objects from a possible 512. plFiberPlate : 20 possible sky positions to use as objects from a possible 511. plFiberPlate : 14 possible sky positions to use as objects from a possible 510. plFiberPlate : 11 possible sky positions to use as objects from a possible 509. plFiberPlate : 14 possible sky positions to use as objects from a possible 508. plFiberPlate : 12 possible sky positions to use as objects from a possible 507. plFiberPlate : 44 possible sky positions to use as objects from a possible 506. plFiberPlate : 4 possible sky positions to use as objects from a possible 505. plFiberPlate : 3 possible sky positions to use as objects from a possible 504. plFiberPlate : 5 possible sky positions to use as objects from a possible 503. plFiberPlate : 3 possible sky positions to use as objects from a possible 502. plFiberPlate : 3 possible sky positions to use as objects from a possible 501. plFiberPlate : 6 possible sky positions to use as objects from a possible 500. plFiberPlate : 3 possible sky positions to use as objects from a possible 499. plFiberPlate : 8 possible sky positions to use as objects from a possible 498. plFiberPlate : 100 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 5 possible sky positions to use as objects from a possible 495. plFiberPlate : 12 possible sky positions to use as objects from a possible 494. plFiberPlate : 5 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 5 possible sky positions to use as objects from a possible 491. plFiberPlate : 7 possible sky positions to use as objects from a possible 490. plFiberPlate : 6 possible sky positions to use as objects from a possible 489. plFiberPlate : 33 possible sky positions to use as objects from a possible 488. plFiberPlate : 9 possible sky positions to use as objects from a possible 487. plFiberPlate : 7 possible sky positions to use as objects from a possible 486. plFiberPlate : 13 possible sky positions to use as objects from a possible 485. plFiberPlate : 8 possible sky positions to use as objects from a possible 484. plFiberPlate : 2 possible sky positions to use as objects from a possible 483. plFiberPlate : 0 possible sky positions to use as objects from a possible 482. plFiberPlate: No sky found for bundle at 270.351 164.671, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 482. plFiberPlate: No sky found for bundle at 270.351 164.671, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 482. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0641.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0642.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0642.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0643.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 91 2 13 70 3 16 74 4 24 119 5 11 147 6 10 89 7 13 58 8 11 80 9 13 98 10 30 135 11 19 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 141 90 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 127 90 plFiberPlate : adding spectro-photo std with objId = 1659 1 4 137 118 plFiberPlate : adding spectro-photo std with objId = 1659 1 3 141 132 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 120 105 plFiberPlate : adding spectro-photo std with objId = 1737 0 6 119 128 plFiberPlate : adding spectro-photo std with objId = 1737 0 5 118 46 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 116 75 plFiberPlate : 68 possible sky positions to use as objects from a possible 524. plFiberPlate : 15 possible sky positions to use as objects from a possible 523. plFiberPlate : 12 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 15 possible sky positions to use as objects from a possible 520. plFiberPlate : 17 possible sky positions to use as objects from a possible 519. plFiberPlate : 23 possible sky positions to use as objects from a possible 518. plFiberPlate : 74 possible sky positions to use as objects from a possible 517. plFiberPlate : 3 possible sky positions to use as objects from a possible 516. plFiberPlate : 6 possible sky positions to use as objects from a possible 515. plFiberPlate : 5 possible sky positions to use as objects from a possible 514. plFiberPlate : 2 possible sky positions to use as objects from a possible 513. plFiberPlate : 5 possible sky positions to use as objects from a possible 512. plFiberPlate : 6 possible sky positions to use as objects from a possible 511. plFiberPlate : 8 possible sky positions to use as objects from a possible 510. plFiberPlate : 11 possible sky positions to use as objects from a possible 509. plFiberPlate : 105 possible sky positions to use as objects from a possible 508. plFiberPlate : 2 possible sky positions to use as objects from a possible 507. plFiberPlate : 3 possible sky positions to use as objects from a possible 506. plFiberPlate : 8 possible sky positions to use as objects from a possible 505. plFiberPlate : 7 possible sky positions to use as objects from a possible 504. plFiberPlate : 5 possible sky positions to use as objects from a possible 503. plFiberPlate : 6 possible sky positions to use as objects from a possible 502. plFiberPlate : 7 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 61 possible sky positions to use as objects from a possible 499. plFiberPlate : 4 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 4 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 12 possible sky positions to use as objects from a possible 494. plFiberPlate : 12 possible sky positions to use as objects from a possible 493. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0642.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0643.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0643.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.6/plPlugMapP-0644.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 43 2 11 62 3 12 81 4 22 117 5 22 130 6 16 73 7 8 44 8 4 48 9 21 81 10 31 137 11 17 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1737 0 1 133 15 plFiberPlate : adding spectro-photo std with objId = 1659 1 5 152 29 plFiberPlate : adding spectro-photo std with objId = 1659 1 6 150 45 plFiberPlate : adding spectro-photo std with objId = 1659 1 1 149 21 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 133 55 plFiberPlate : adding spectro-photo std with objId = 1659 1 6 152 57 plFiberPlate : adding spectro-photo std with objId = 1737 0 5 141 14 plFiberPlate : adding spectro-photo std with objId = 1737 0 3 133 30 plFiberPlate : 117 possible sky positions to use as objects from a possible 441. plFiberPlate : 50 possible sky positions to use as objects from a possible 440. plFiberPlate : 24 possible sky positions to use as objects from a possible 439. plFiberPlate : 33 possible sky positions to use as objects from a possible 438. plFiberPlate : 16 possible sky positions to use as objects from a possible 437. plFiberPlate : 11 possible sky positions to use as objects from a possible 436. plFiberPlate : 4 possible sky positions to use as objects from a possible 435. plFiberPlate : 96 possible sky positions to use as objects from a possible 434. plFiberPlate : 26 possible sky positions to use as objects from a possible 433. plFiberPlate : 10 possible sky positions to use as objects from a possible 432. plFiberPlate : 5 possible sky positions to use as objects from a possible 431. plFiberPlate : 7 possible sky positions to use as objects from a possible 430. plFiberPlate : 15 possible sky positions to use as objects from a possible 429. plFiberPlate : 8 possible sky positions to use as objects from a possible 428. plFiberPlate : 5 possible sky positions to use as objects from a possible 427. plFiberPlate : 3 possible sky positions to use as objects from a possible 426. plFiberPlate : 71 possible sky positions to use as objects from a possible 425. plFiberPlate : 10 possible sky positions to use as objects from a possible 424. plFiberPlate : 10 possible sky positions to use as objects from a possible 423. plFiberPlate : 3 possible sky positions to use as objects from a possible 422. plFiberPlate : 6 possible sky positions to use as objects from a possible 421. plFiberPlate : 10 possible sky positions to use as objects from a possible 420. plFiberPlate : 4 possible sky positions to use as objects from a possible 419. plFiberPlate : 2 possible sky positions to use as objects from a possible 418. plFiberPlate : 11 possible sky positions to use as objects from a possible 417. plFiberPlate : 37 possible sky positions to use as objects from a possible 416. plFiberPlate : 17 possible sky positions to use as objects from a possible 415. plFiberPlate : 8 possible sky positions to use as objects from a possible 414. plFiberPlate : 3 possible sky positions to use as objects from a possible 413. plFiberPlate : 3 possible sky positions to use as objects from a possible 412. plFiberPlate : 5 possible sky positions to use as objects from a possible 411. plFiberPlate : 7 possible sky positions to use as objects from a possible 410. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0643.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0644.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.6/plOverlay-0644.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Jun 1 13:56:48 CDT 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v10_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v10_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 11 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0634.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0634.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.2884,9.6818) and (-2.53,11.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0634.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0635.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7343,-4.5754) and (12.28,-3.49) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0635.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6421,-4.8593) and (-12.39,-0.53) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0635.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0636.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0636.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0636.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0637.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0637.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0637.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0638.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0638.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.5742,-11.8481) and (-2.01,-12.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0638.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0639.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0639.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0639.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0640.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0640.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0640.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0641.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0641.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0641.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0642.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0642.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0642.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0643.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.9926,-7.9422) and (10.53,-6.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0643.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0643.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0644.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0644.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.6/plFanuc-0644.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Jun 1 13:57:21 CDT 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v10_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v10_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140dca668 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 11 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 634 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 635 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 636 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 637 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 638 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 639 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 640 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 641 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 642 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 643 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 644 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Jun 1 13:57:37 CDT 2001 Begin running plateEnder dr2001.6 -morePipes 1 Executing commands in /p/OSF1/dervish/v7_15/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v10_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v10_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_7_8/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_2/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Fri Jun 1 13:58:17 CDT 2001 ALL DONE PS: Read file for stderr output of this job.