Sender: LSF System Subject: Job 42428: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Jan 23 13:46:09 2002 Results reported at Wed Jan 23 13:50:04 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_52 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.01.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 200.12 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Jan 23 13:46:12 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Jan 23 13:46:17 CST 2002 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/fnal/ups/prd/encp/v2_14OSF1-V4:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/ktools/v1_4/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/sbin:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5c/bin:/p/OSF1/photo/v5_2_27/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/GENERIC_UNIX/dp/v11_52/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_12/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_3/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_6/bin --------------------------------------------------------------- Wed Jan 23 13:46:17 CST 2002 ASTROM_DIR=/p/OSF1/astrom/v3_5c ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 DERVISH_DIR=/p/OSF1/dervish/v8_3 DP_DIR=/p/GENERIC_UNIX/dp/v11_52 DUST_DIR=/p/IRIX6/dust/v1_0 ENCP_DIR=/fnal/ups/prd/encp/v2_14OSF1-V4 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INT_DIR=/p/OSF1/dervish/v8_3/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_5 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_27 PLATE_DIR=/p/OSF1/plate/v3_6 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_12 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Wed Jan 23 13:46:17 CST 2002 Begin running plate --------------------------------------------------------------- Wed Jan 23 13:46:17 CST 2002 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_52/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_52 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_5/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e33668 makePlates : beginning loop over plObs chain; makePlates : making 15 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0628.par makePlates : plateInfo struct for plate 857 : (h2).mjd 52317 (h2).raCen 115.5697 (h2).decCen 24.57216 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 115.570 24.572 115.570 26.072 plMakePlateFromTile : mjd of obs : 52317.562083 Observed HA/dec of plate center, fiducial point (deg) : -25.002 24.571 -25.003 26.070 The rotation angle of the fid. point is 63.720759 plMakePlateFromTile : beginning loop over 954 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0629.par makePlates : plateInfo struct for plate 858 : (h2).mjd 52317 (h2).raCen 117.6309 (h2).decCen 26.67687 (h2).haCen -27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 117.631 26.677 117.631 28.177 plMakePlateFromTile : mjd of obs : 52317.562252 Observed HA/dec of plate center, fiducial point (deg) : -27.002 26.675 -27.003 28.174 The rotation angle of the fid. point is 68.883646 plMakePlateFromTile : beginning loop over 941 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0630.par makePlates : plateInfo struct for plate 859 : (h2).mjd 52317 (h2).raCen 119.3966 (h2).decCen 28.28771 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.397 28.288 119.397 29.788 plMakePlateFromTile : mjd of obs : 52317.561602 Observed HA/dec of plate center, fiducial point (deg) : -29.002 28.285 -29.003 29.784 The rotation angle of the fid. point is 72.534950 plMakePlateFromTile : beginning loop over 979 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0631.par makePlates : plateInfo struct for plate 860 : (h2).mjd 52317 (h2).raCen 121.0067 (h2).decCen 29.73914 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.007 29.739 121.007 31.239 plMakePlateFromTile : mjd of obs : 52317.602087 Observed HA/dec of plate center, fiducial point (deg) : -16.002 29.735 -16.003 31.234 The rotation angle of the fid. point is 73.369558 plMakePlateFromTile : beginning loop over 1025 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0632.par makePlates : plateInfo struct for plate 861 : (h2).mjd 52317 (h2).raCen 123.2188 (h2).decCen 31.58687 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.219 31.587 123.219 33.087 plMakePlateFromTile : mjd of obs : 52317.602674 Observed HA/dec of plate center, fiducial point (deg) : -18.002 31.582 -18.003 33.081 The rotation angle of the fid. point is 80.729040 plMakePlateFromTile : beginning loop over 1002 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-155.09, 138.89, 7.9) and (-155.27, 138.74, 7.2) checkLTHo : distance = 0.239, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-155.09, 138.89, 7.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0633.par makePlates : plateInfo struct for plate 862 : (h2).mjd 52317 (h2).raCen 125.4986 (h2).decCen 33.39286 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.499 33.393 125.499 34.893 plMakePlateFromTile : mjd of obs : 52317.603448 Observed HA/dec of plate center, fiducial point (deg) : -20.002 33.387 -20.003 34.886 The rotation angle of the fid. point is 86.565166 plMakePlateFromTile : beginning loop over 1079 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0634.par makePlates : plateInfo struct for plate 863 : (h2).mjd 52317 (h2).raCen 127.77 (h2).decCen 35.24828 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.770 35.248 127.770 36.748 plMakePlateFromTile : mjd of obs : 52317.604199 Observed HA/dec of plate center, fiducial point (deg) : -22.002 35.241 -22.003 36.741 The rotation angle of the fid. point is 91.395119 plMakePlateFromTile : beginning loop over 1108 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0635.par makePlates : plateInfo struct for plate 864 : (h2).mjd 52317 (h2).raCen 129.9223 (h2).decCen 36.71822 (h2).haCen -24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.922 36.718 129.922 38.218 plMakePlateFromTile : mjd of obs : 52317.604620 Observed HA/dec of plate center, fiducial point (deg) : -24.002 36.711 -24.003 38.210 The rotation angle of the fid. point is 94.205743 plMakePlateFromTile : beginning loop over 1099 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0636.par makePlates : plateInfo struct for plate 865 : (h2).mjd 52317 (h2).raCen 131.8203 (h2).decCen 37.96832 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.820 37.968 131.820 39.468 plMakePlateFromTile : mjd of obs : 52317.604335 Observed HA/dec of plate center, fiducial point (deg) : -26.002 37.960 -26.003 39.460 The rotation angle of the fid. point is 95.885834 plMakePlateFromTile : beginning loop over 1116 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0637.par makePlates : plateInfo struct for plate 866 : (h2).mjd 52317 (h2).raCen 134.0553 (h2).decCen 39.42067 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.055 39.421 134.055 40.921 plMakePlateFromTile : mjd of obs : 52317.602214 Observed HA/dec of plate center, fiducial point (deg) : -29.002 39.412 -29.003 40.912 The rotation angle of the fid. point is 96.800529 plMakePlateFromTile : beginning loop over 1102 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0638.par makePlates : plateInfo struct for plate 867 : (h2).mjd 52317 (h2).raCen 134.9923 (h2).decCen 39.87946 (h2).haCen -14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.992 39.879 134.992 41.379 plMakePlateFromTile : mjd of obs : 52317.646377 Observed HA/dec of plate center, fiducial point (deg) : -14.002 39.870 -14.003 41.369 The rotation angle of the fid. point is 117.844754 plMakePlateFromTile : beginning loop over 1115 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0639.par makePlates : plateInfo struct for plate 868 : (h2).mjd 52317 (h2).raCen 136.9501 (h2).decCen 41.05503 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.950 41.055 136.950 42.555 plMakePlateFromTile : mjd of obs : 52317.646258 Observed HA/dec of plate center, fiducial point (deg) : -16.002 41.045 -16.003 42.544 The rotation angle of the fid. point is 117.839808 plMakePlateFromTile : beginning loop over 1133 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0640.par makePlates : plateInfo struct for plate 869 : (h2).mjd 52317 (h2).raCen 139.3592 (h2).decCen 42.40504 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.359 42.405 139.359 43.905 plMakePlateFromTile : mjd of obs : 52317.644619 Observed HA/dec of plate center, fiducial point (deg) : -19.002 42.394 -19.003 43.893 The rotation angle of the fid. point is 116.447239 plMakePlateFromTile : beginning loop over 1139 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0641.par makePlates : plateInfo struct for plate 870 : (h2).mjd 52317 (h2).raCen 142.2921 (h2).decCen 43.61375 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.292 43.614 142.292 45.114 plMakePlateFromTile : mjd of obs : 52317.644429 Observed HA/dec of plate center, fiducial point (deg) : -22.002 43.602 -22.003 45.101 The rotation angle of the fid. point is 114.805939 plMakePlateFromTile : beginning loop over 1163 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk33/complete//plPlugMapT-0642.par makePlates : plateInfo struct for plate 871 : (h2).mjd 52317 (h2).raCen 145.1541 (h2).decCen 45.07933 (h2).haCen -10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -2.7 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.154 45.079 145.154 46.579 plMakePlateFromTile : mjd of obs : 52317.685612 Observed HA/dec of plate center, fiducial point (deg) : -10.002 45.066 -10.003 46.566 The rotation angle of the fid. point is 144.381479 plMakePlateFromTile : beginning loop over 1146 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Jan 23 13:46:55 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_52/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_52 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_5/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 15 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0857.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 12 2 7 10 3 19 39 4 13 53 5 3 26 6 0 20 7 5 58 8 19 77 9 11 76 10 36 75 11 13 30 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 45 168 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 37 116 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 37 50 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 34 131 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 23 105 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 38 101 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 35 276 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 43 54 plFiberPlate : 65 possible sky positions to use as objects from a possible 246. plFiberPlate : 63 possible sky positions to use as objects from a possible 245. plFiberPlate : 59 possible sky positions to use as objects from a possible 244. plFiberPlate : 51 possible sky positions to use as objects from a possible 243. plFiberPlate : 36 possible sky positions to use as objects from a possible 242. plFiberPlate : 24 possible sky positions to use as objects from a possible 241. plFiberPlate : 28 possible sky positions to use as objects from a possible 240. plFiberPlate : 51 possible sky positions to use as objects from a possible 239. plFiberPlate : 43 possible sky positions to use as objects from a possible 238. plFiberPlate : 34 possible sky positions to use as objects from a possible 237. plFiberPlate : 33 possible sky positions to use as objects from a possible 236. plFiberPlate : 22 possible sky positions to use as objects from a possible 235. plFiberPlate : 19 possible sky positions to use as objects from a possible 234. plFiberPlate : 17 possible sky positions to use as objects from a possible 233. plFiberPlate : 9 possible sky positions to use as objects from a possible 232. plFiberPlate : 5 possible sky positions to use as objects from a possible 231. plFiberPlate : 22 possible sky positions to use as objects from a possible 230. plFiberPlate : 17 possible sky positions to use as objects from a possible 229. plFiberPlate : 9 possible sky positions to use as objects from a possible 228. plFiberPlate : 5 possible sky positions to use as objects from a possible 227. plFiberPlate : 4 possible sky positions to use as objects from a possible 226. plFiberPlate : 10 possible sky positions to use as objects from a possible 225. plFiberPlate : 4 possible sky positions to use as objects from a possible 224. plFiberPlate : 10 possible sky positions to use as objects from a possible 223. plFiberPlate : 12 possible sky positions to use as objects from a possible 222. plFiberPlate : 6 possible sky positions to use as objects from a possible 221. plFiberPlate : 9 possible sky positions to use as objects from a possible 220. plFiberPlate : 8 possible sky positions to use as objects from a possible 219. plFiberPlate : 12 possible sky positions to use as objects from a possible 218. plFiberPlate : 5 possible sky positions to use as objects from a possible 217. plFiberPlate : 7 possible sky positions to use as objects from a possible 216. plFiberPlate : 7 possible sky positions to use as objects from a possible 215. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0857.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0857.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0858.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 13 2 12 20 3 13 68 4 5 68 5 1 18 6 1 19 7 3 64 8 9 76 9 5 71 10 26 99 11 17 37 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 51 103 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 47 122 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 49 91 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 63 40 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 57 186 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 57 52 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 45 232 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 55 105 plFiberPlate : 85 possible sky positions to use as objects from a possible 271. plFiberPlate : 70 possible sky positions to use as objects from a possible 270. plFiberPlate : 66 possible sky positions to use as objects from a possible 269. plFiberPlate : 49 possible sky positions to use as objects from a possible 268. plFiberPlate : 33 possible sky positions to use as objects from a possible 267. plFiberPlate : 20 possible sky positions to use as objects from a possible 266. plFiberPlate : 27 possible sky positions to use as objects from a possible 265. plFiberPlate : 30 possible sky positions to use as objects from a possible 264. plFiberPlate : 19 possible sky positions to use as objects from a possible 263. plFiberPlate : 15 possible sky positions to use as objects from a possible 262. plFiberPlate : 6 possible sky positions to use as objects from a possible 261. plFiberPlate : 11 possible sky positions to use as objects from a possible 260. plFiberPlate : 8 possible sky positions to use as objects from a possible 259. plFiberPlate : 3 possible sky positions to use as objects from a possible 258. plFiberPlate : 2 possible sky positions to use as objects from a possible 257. plFiberPlate : 1 possible sky positions to use as objects from a possible 256. plFiberPlate : 20 possible sky positions to use as objects from a possible 255. plFiberPlate : 14 possible sky positions to use as objects from a possible 254. plFiberPlate : 10 possible sky positions to use as objects from a possible 253. plFiberPlate : 3 possible sky positions to use as objects from a possible 252. plFiberPlate : 6 possible sky positions to use as objects from a possible 251. plFiberPlate : 7 possible sky positions to use as objects from a possible 250. plFiberPlate : 6 possible sky positions to use as objects from a possible 249. plFiberPlate : 7 possible sky positions to use as objects from a possible 248. plFiberPlate : 12 possible sky positions to use as objects from a possible 247. plFiberPlate : 7 possible sky positions to use as objects from a possible 246. plFiberPlate : 1 possible sky positions to use as objects from a possible 245. plFiberPlate : 6 possible sky positions to use as objects from a possible 244. plFiberPlate : 8 possible sky positions to use as objects from a possible 243. plFiberPlate : 12 possible sky positions to use as objects from a possible 242. plFiberPlate : 6 possible sky positions to use as objects from a possible 241. plFiberPlate : 7 possible sky positions to use as objects from a possible 240. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0857.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0858.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0858.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0859.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 28 2 4 19 3 8 61 4 4 73 5 1 24 6 1 22 7 8 80 8 16 87 9 3 77 10 13 105 11 9 44 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 71 143 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 66 56 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 77 145 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 72 39 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 73 89 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 57 186 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 73 15 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 55 105 plFiberPlate : 91 possible sky positions to use as objects from a possible 307. plFiberPlate : 75 possible sky positions to use as objects from a possible 306. plFiberPlate : 56 possible sky positions to use as objects from a possible 305. plFiberPlate : 33 possible sky positions to use as objects from a possible 304. plFiberPlate : 14 possible sky positions to use as objects from a possible 303. plFiberPlate : 8 possible sky positions to use as objects from a possible 302. plFiberPlate : 25 possible sky positions to use as objects from a possible 301. plFiberPlate : 43 possible sky positions to use as objects from a possible 300. plFiberPlate : 29 possible sky positions to use as objects from a possible 299. plFiberPlate : 25 possible sky positions to use as objects from a possible 298. plFiberPlate : 19 possible sky positions to use as objects from a possible 297. plFiberPlate : 10 possible sky positions to use as objects from a possible 296. plFiberPlate : 8 possible sky positions to use as objects from a possible 295. plFiberPlate : 17 possible sky positions to use as objects from a possible 294. plFiberPlate : 4 possible sky positions to use as objects from a possible 293. plFiberPlate : 6 possible sky positions to use as objects from a possible 292. plFiberPlate : 28 possible sky positions to use as objects from a possible 291. plFiberPlate : 18 possible sky positions to use as objects from a possible 290. plFiberPlate : 13 possible sky positions to use as objects from a possible 289. plFiberPlate : 6 possible sky positions to use as objects from a possible 288. plFiberPlate : 3 possible sky positions to use as objects from a possible 287. plFiberPlate : 4 possible sky positions to use as objects from a possible 286. plFiberPlate : 1 possible sky positions to use as objects from a possible 285. plFiberPlate : 6 possible sky positions to use as objects from a possible 284. plFiberPlate : 9 possible sky positions to use as objects from a possible 283. plFiberPlate : 7 possible sky positions to use as objects from a possible 282. plFiberPlate : 3 possible sky positions to use as objects from a possible 281. plFiberPlate : 12 possible sky positions to use as objects from a possible 280. plFiberPlate : 17 possible sky positions to use as objects from a possible 279. plFiberPlate : 21 possible sky positions to use as objects from a possible 278. plFiberPlate : 15 possible sky positions to use as objects from a possible 277. plFiberPlate : 13 possible sky positions to use as objects from a possible 276. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0858.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0859.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0859.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0860.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 30 2 10 23 3 15 70 4 8 91 5 2 32 6 0 24 7 3 65 8 8 85 9 2 90 10 23 122 11 14 49 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 93 23 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 77 145 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 77 122 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 92 134 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 77 59 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 89 96 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 88 125 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 78 79 plFiberPlate : 117 possible sky positions to use as objects from a possible 344. plFiberPlate : 91 possible sky positions to use as objects from a possible 343. plFiberPlate : 89 possible sky positions to use as objects from a possible 342. plFiberPlate : 68 possible sky positions to use as objects from a possible 341. plFiberPlate : 42 possible sky positions to use as objects from a possible 340. plFiberPlate : 26 possible sky positions to use as objects from a possible 339. plFiberPlate : 31 possible sky positions to use as objects from a possible 338. plFiberPlate : 44 possible sky positions to use as objects from a possible 337. plFiberPlate : 28 possible sky positions to use as objects from a possible 336. plFiberPlate : 26 possible sky positions to use as objects from a possible 335. plFiberPlate : 19 possible sky positions to use as objects from a possible 334. plFiberPlate : 13 possible sky positions to use as objects from a possible 333. plFiberPlate : 9 possible sky positions to use as objects from a possible 332. plFiberPlate : 9 possible sky positions to use as objects from a possible 331. plFiberPlate : 6 possible sky positions to use as objects from a possible 330. plFiberPlate : 7 possible sky positions to use as objects from a possible 329. plFiberPlate : 23 possible sky positions to use as objects from a possible 328. plFiberPlate : 21 possible sky positions to use as objects from a possible 327. plFiberPlate : 15 possible sky positions to use as objects from a possible 326. plFiberPlate : 12 possible sky positions to use as objects from a possible 325. plFiberPlate : 10 possible sky positions to use as objects from a possible 324. plFiberPlate : 10 possible sky positions to use as objects from a possible 323. plFiberPlate : 2 possible sky positions to use as objects from a possible 322. plFiberPlate : 13 possible sky positions to use as objects from a possible 321. plFiberPlate : 16 possible sky positions to use as objects from a possible 320. plFiberPlate : 8 possible sky positions to use as objects from a possible 319. plFiberPlate : 3 possible sky positions to use as objects from a possible 318. plFiberPlate : 4 possible sky positions to use as objects from a possible 317. plFiberPlate : 8 possible sky positions to use as objects from a possible 316. plFiberPlate : 3 possible sky positions to use as objects from a possible 315. plFiberPlate : 12 possible sky positions to use as objects from a possible 314. plFiberPlate : 16 possible sky positions to use as objects from a possible 313. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0859.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0860.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0860.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0861.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 40 2 6 25 3 7 73 4 3 82 5 0 44 6 0 37 7 0 81 8 2 109 9 0 94 10 11 101 11 7 47 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 98 181 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 96 40 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 108 142 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 103 98 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 105 12 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 111 6 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 89 42 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 97 121 plFiberPlate : 98 possible sky positions to use as objects from a possible 362. plFiberPlate : 86 possible sky positions to use as objects from a possible 361. plFiberPlate : 59 possible sky positions to use as objects from a possible 360. plFiberPlate : 43 possible sky positions to use as objects from a possible 359. plFiberPlate : 31 possible sky positions to use as objects from a possible 358. plFiberPlate : 18 possible sky positions to use as objects from a possible 357. plFiberPlate : 18 possible sky positions to use as objects from a possible 356. plFiberPlate : 44 possible sky positions to use as objects from a possible 355. plFiberPlate : 38 possible sky positions to use as objects from a possible 354. plFiberPlate : 29 possible sky positions to use as objects from a possible 353. plFiberPlate : 19 possible sky positions to use as objects from a possible 352. plFiberPlate : 12 possible sky positions to use as objects from a possible 351. plFiberPlate : 10 possible sky positions to use as objects from a possible 350. plFiberPlate : 5 possible sky positions to use as objects from a possible 349. plFiberPlate : 18 possible sky positions to use as objects from a possible 348. plFiberPlate : 13 possible sky positions to use as objects from a possible 347. plFiberPlate : 37 possible sky positions to use as objects from a possible 346. plFiberPlate : 34 possible sky positions to use as objects from a possible 345. plFiberPlate : 22 possible sky positions to use as objects from a possible 344. plFiberPlate : 10 possible sky positions to use as objects from a possible 343. plFiberPlate : 8 possible sky positions to use as objects from a possible 342. plFiberPlate : 10 possible sky positions to use as objects from a possible 341. plFiberPlate : 14 possible sky positions to use as objects from a possible 340. plFiberPlate : 7 possible sky positions to use as objects from a possible 339. plFiberPlate : 7 possible sky positions to use as objects from a possible 338. plFiberPlate : 18 possible sky positions to use as objects from a possible 337. plFiberPlate : 15 possible sky positions to use as objects from a possible 336. plFiberPlate : 5 possible sky positions to use as objects from a possible 335. plFiberPlate : 10 possible sky positions to use as objects from a possible 334. plFiberPlate : 9 possible sky positions to use as objects from a possible 333. plFiberPlate : 11 possible sky positions to use as objects from a possible 332. plFiberPlate : 18 possible sky positions to use as objects from a possible 331. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0860.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0861.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0861.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0862.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 41 2 1 17 3 6 74 4 4 113 5 0 65 6 7 48 7 13 80 8 11 91 9 12 97 10 17 113 11 7 58 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 115 94 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 126 12 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 108 114 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 113 51 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 117 84 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 116 70 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 110 10 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 129 24 plFiberPlate : 125 possible sky positions to use as objects from a possible 397. plFiberPlate : 75 possible sky positions to use as objects from a possible 396. plFiberPlate : 57 possible sky positions to use as objects from a possible 395. plFiberPlate : 35 possible sky positions to use as objects from a possible 394. plFiberPlate : 23 possible sky positions to use as objects from a possible 393. plFiberPlate : 16 possible sky positions to use as objects from a possible 392. plFiberPlate : 22 possible sky positions to use as objects from a possible 391. plFiberPlate : 57 possible sky positions to use as objects from a possible 390. plFiberPlate : 48 possible sky positions to use as objects from a possible 389. plFiberPlate : 35 possible sky positions to use as objects from a possible 388. plFiberPlate : 29 possible sky positions to use as objects from a possible 387. plFiberPlate : 20 possible sky positions to use as objects from a possible 386. plFiberPlate : 13 possible sky positions to use as objects from a possible 385. plFiberPlate : 14 possible sky positions to use as objects from a possible 384. plFiberPlate : 11 possible sky positions to use as objects from a possible 383. plFiberPlate : 13 possible sky positions to use as objects from a possible 382. plFiberPlate : 46 possible sky positions to use as objects from a possible 381. plFiberPlate : 36 possible sky positions to use as objects from a possible 380. plFiberPlate : 26 possible sky positions to use as objects from a possible 379. plFiberPlate : 10 possible sky positions to use as objects from a possible 378. plFiberPlate : 11 possible sky positions to use as objects from a possible 377. plFiberPlate : 12 possible sky positions to use as objects from a possible 376. plFiberPlate : 12 possible sky positions to use as objects from a possible 375. plFiberPlate : 3 possible sky positions to use as objects from a possible 374. plFiberPlate : 7 possible sky positions to use as objects from a possible 373. plFiberPlate : 26 possible sky positions to use as objects from a possible 372. plFiberPlate : 7 possible sky positions to use as objects from a possible 371. plFiberPlate : 6 possible sky positions to use as objects from a possible 370. plFiberPlate : 11 possible sky positions to use as objects from a possible 369. plFiberPlate : 13 possible sky positions to use as objects from a possible 368. plFiberPlate : 18 possible sky positions to use as objects from a possible 367. plFiberPlate : 14 possible sky positions to use as objects from a possible 366. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0861.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0862.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0862.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0863.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 63 2 4 49 3 9 76 4 8 102 5 0 56 6 0 36 7 3 69 8 15 96 9 4 107 10 22 131 11 14 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 134 115 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 134 12 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 141 35 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 143 72 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 141 119 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 132 14 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 124 6 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 127 106 plFiberPlate : 120 possible sky positions to use as objects from a possible 421. plFiberPlate : 82 possible sky positions to use as objects from a possible 420. plFiberPlate : 66 possible sky positions to use as objects from a possible 419. plFiberPlate : 40 possible sky positions to use as objects from a possible 418. plFiberPlate : 36 possible sky positions to use as objects from a possible 417. plFiberPlate : 20 possible sky positions to use as objects from a possible 416. plFiberPlate : 48 possible sky positions to use as objects from a possible 415. plFiberPlate : 44 possible sky positions to use as objects from a possible 414. plFiberPlate : 36 possible sky positions to use as objects from a possible 413. plFiberPlate : 18 possible sky positions to use as objects from a possible 412. plFiberPlate : 12 possible sky positions to use as objects from a possible 411. plFiberPlate : 4 possible sky positions to use as objects from a possible 410. plFiberPlate : 13 possible sky positions to use as objects from a possible 409. plFiberPlate : 8 possible sky positions to use as objects from a possible 408. plFiberPlate : 12 possible sky positions to use as objects from a possible 407. plFiberPlate : 6 possible sky positions to use as objects from a possible 406. plFiberPlate : 45 possible sky positions to use as objects from a possible 405. plFiberPlate : 33 possible sky positions to use as objects from a possible 404. plFiberPlate : 22 possible sky positions to use as objects from a possible 403. plFiberPlate : 18 possible sky positions to use as objects from a possible 402. plFiberPlate : 7 possible sky positions to use as objects from a possible 401. plFiberPlate : 6 possible sky positions to use as objects from a possible 400. plFiberPlate : 10 possible sky positions to use as objects from a possible 399. plFiberPlate : 12 possible sky positions to use as objects from a possible 398. plFiberPlate : 11 possible sky positions to use as objects from a possible 397. plFiberPlate : 11 possible sky positions to use as objects from a possible 396. plFiberPlate : 7 possible sky positions to use as objects from a possible 395. plFiberPlate : 9 possible sky positions to use as objects from a possible 394. plFiberPlate : 9 possible sky positions to use as objects from a possible 393. plFiberPlate : 13 possible sky positions to use as objects from a possible 392. plFiberPlate : 5 possible sky positions to use as objects from a possible 391. plFiberPlate : 13 possible sky positions to use as objects from a possible 390. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0862.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0863.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0863.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0864.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 53 2 5 38 3 10 76 4 8 102 5 1 71 6 0 51 7 1 83 8 8 114 9 1 100 10 15 125 11 10 76 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 139 6 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 144 22 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 159 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 148 84 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 147 65 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 144 100 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 154 29 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 149 83 plFiberPlate : 109 possible sky positions to use as objects from a possible 439. plFiberPlate : 91 possible sky positions to use as objects from a possible 438. plFiberPlate : 57 possible sky positions to use as objects from a possible 437. plFiberPlate : 40 possible sky positions to use as objects from a possible 436. plFiberPlate : 24 possible sky positions to use as objects from a possible 435. plFiberPlate : 30 possible sky positions to use as objects from a possible 434. plFiberPlate : 12 possible sky positions to use as objects from a possible 433. plFiberPlate : 60 possible sky positions to use as objects from a possible 432. plFiberPlate : 39 possible sky positions to use as objects from a possible 431. plFiberPlate : 26 possible sky positions to use as objects from a possible 430. plFiberPlate : 16 possible sky positions to use as objects from a possible 429. plFiberPlate : 8 possible sky positions to use as objects from a possible 428. plFiberPlate : 16 possible sky positions to use as objects from a possible 427. plFiberPlate : 6 possible sky positions to use as objects from a possible 426. plFiberPlate : 4 possible sky positions to use as objects from a possible 425. plFiberPlate : 19 possible sky positions to use as objects from a possible 424. plFiberPlate : 38 possible sky positions to use as objects from a possible 423. plFiberPlate : 40 possible sky positions to use as objects from a possible 422. plFiberPlate : 22 possible sky positions to use as objects from a possible 421. plFiberPlate : 12 possible sky positions to use as objects from a possible 420. plFiberPlate : 8 possible sky positions to use as objects from a possible 419. plFiberPlate : 5 possible sky positions to use as objects from a possible 418. plFiberPlate : 15 possible sky positions to use as objects from a possible 417. plFiberPlate : 16 possible sky positions to use as objects from a possible 416. plFiberPlate : 22 possible sky positions to use as objects from a possible 415. plFiberPlate : 25 possible sky positions to use as objects from a possible 414. plFiberPlate : 24 possible sky positions to use as objects from a possible 413. plFiberPlate : 12 possible sky positions to use as objects from a possible 412. plFiberPlate : 12 possible sky positions to use as objects from a possible 411. plFiberPlate : 13 possible sky positions to use as objects from a possible 410. plFiberPlate : 9 possible sky positions to use as objects from a possible 409. plFiberPlate : 13 possible sky positions to use as objects from a possible 408. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0863.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0864.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0864.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0865.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 54 2 8 56 3 6 94 4 1 122 5 2 76 6 2 49 7 3 76 8 8 101 9 5 94 10 15 133 11 14 72 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 154 56 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 152 89 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 165 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 159 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 172 34 plFiberPlate : adding spectro-photo std with objId = 2830 0 5 158 20 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 175 19 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 167 15 plFiberPlate : 128 possible sky positions to use as objects from a possible 454. plFiberPlate : 82 possible sky positions to use as objects from a possible 453. plFiberPlate : 66 possible sky positions to use as objects from a possible 452. plFiberPlate : 31 possible sky positions to use as objects from a possible 451. plFiberPlate : 11 possible sky positions to use as objects from a possible 450. plFiberPlate : 11 possible sky positions to use as objects from a possible 449. plFiberPlate : 40 possible sky positions to use as objects from a possible 448. plFiberPlate : 53 possible sky positions to use as objects from a possible 447. plFiberPlate : 31 possible sky positions to use as objects from a possible 446. plFiberPlate : 10 possible sky positions to use as objects from a possible 445. plFiberPlate : 9 possible sky positions to use as objects from a possible 444. plFiberPlate : 6 possible sky positions to use as objects from a possible 443. plFiberPlate : 5 possible sky positions to use as objects from a possible 442. plFiberPlate : 3 possible sky positions to use as objects from a possible 441. plFiberPlate : 5 possible sky positions to use as objects from a possible 440. plFiberPlate : 7 possible sky positions to use as objects from a possible 439. plFiberPlate : 38 possible sky positions to use as objects from a possible 438. plFiberPlate : 31 possible sky positions to use as objects from a possible 437. plFiberPlate : 13 possible sky positions to use as objects from a possible 436. plFiberPlate : 2 possible sky positions to use as objects from a possible 435. plFiberPlate : 5 possible sky positions to use as objects from a possible 434. plFiberPlate : 2 possible sky positions to use as objects from a possible 433. plFiberPlate : 4 possible sky positions to use as objects from a possible 432. plFiberPlate : 20 possible sky positions to use as objects from a possible 431. plFiberPlate : 24 possible sky positions to use as objects from a possible 430. plFiberPlate : 20 possible sky positions to use as objects from a possible 429. plFiberPlate : 8 possible sky positions to use as objects from a possible 428. plFiberPlate : 20 possible sky positions to use as objects from a possible 427. plFiberPlate : 6 possible sky positions to use as objects from a possible 426. plFiberPlate : 13 possible sky positions to use as objects from a possible 425. plFiberPlate : 7 possible sky positions to use as objects from a possible 424. plFiberPlate : 8 possible sky positions to use as objects from a possible 423. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0864.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0865.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0865.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0866.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 66 2 4 53 3 7 91 4 4 106 5 0 64 6 0 45 7 1 77 8 3 109 9 0 111 10 9 135 11 7 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 179 43 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 166 22 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 182 16 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 168 43 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 175 19 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 178 31 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 186 117 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 167 15 plFiberPlate : 108 possible sky positions to use as objects from a possible 455. plFiberPlate : 84 possible sky positions to use as objects from a possible 454. plFiberPlate : 63 possible sky positions to use as objects from a possible 453. plFiberPlate : 24 possible sky positions to use as objects from a possible 452. plFiberPlate : 27 possible sky positions to use as objects from a possible 451. plFiberPlate : 19 possible sky positions to use as objects from a possible 450. plFiberPlate : 12 possible sky positions to use as objects from a possible 449. plFiberPlate : 66 possible sky positions to use as objects from a possible 448. plFiberPlate : 38 possible sky positions to use as objects from a possible 447. plFiberPlate : 26 possible sky positions to use as objects from a possible 446. plFiberPlate : 14 possible sky positions to use as objects from a possible 445. plFiberPlate : 9 possible sky positions to use as objects from a possible 444. plFiberPlate : 8 possible sky positions to use as objects from a possible 443. plFiberPlate : 2 possible sky positions to use as objects from a possible 442. plFiberPlate : 9 possible sky positions to use as objects from a possible 441. plFiberPlate : 23 possible sky positions to use as objects from a possible 440. plFiberPlate : 35 possible sky positions to use as objects from a possible 439. plFiberPlate : 34 possible sky positions to use as objects from a possible 438. plFiberPlate : 34 possible sky positions to use as objects from a possible 437. plFiberPlate : 25 possible sky positions to use as objects from a possible 436. plFiberPlate : 12 possible sky positions to use as objects from a possible 435. plFiberPlate : 15 possible sky positions to use as objects from a possible 434. plFiberPlate : 2 possible sky positions to use as objects from a possible 433. plFiberPlate : 3 possible sky positions to use as objects from a possible 432. plFiberPlate : 30 possible sky positions to use as objects from a possible 431. plFiberPlate : 22 possible sky positions to use as objects from a possible 430. plFiberPlate : 19 possible sky positions to use as objects from a possible 429. plFiberPlate : 17 possible sky positions to use as objects from a possible 428. plFiberPlate : 11 possible sky positions to use as objects from a possible 427. plFiberPlate : 11 possible sky positions to use as objects from a possible 426. plFiberPlate : 25 possible sky positions to use as objects from a possible 425. plFiberPlate : 13 possible sky positions to use as objects from a possible 424. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0865.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0866.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0866.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0867.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 80 2 3 39 3 7 71 4 5 93 5 0 71 6 0 52 7 4 91 8 7 114 9 3 104 10 11 127 11 6 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 188 69 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 182 31 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 179 43 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 182 16 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 178 43 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 193 20 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 178 31 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 186 117 plFiberPlate : 103 possible sky positions to use as objects from a possible 466. plFiberPlate : 92 possible sky positions to use as objects from a possible 465. plFiberPlate : 77 possible sky positions to use as objects from a possible 464. plFiberPlate : 45 possible sky positions to use as objects from a possible 463. plFiberPlate : 28 possible sky positions to use as objects from a possible 462. plFiberPlate : 16 possible sky positions to use as objects from a possible 461. plFiberPlate : 41 possible sky positions to use as objects from a possible 460. plFiberPlate : 62 possible sky positions to use as objects from a possible 459. plFiberPlate : 52 possible sky positions to use as objects from a possible 458. plFiberPlate : 40 possible sky positions to use as objects from a possible 457. plFiberPlate : 34 possible sky positions to use as objects from a possible 456. plFiberPlate : 16 possible sky positions to use as objects from a possible 455. plFiberPlate : 7 possible sky positions to use as objects from a possible 454. plFiberPlate : 17 possible sky positions to use as objects from a possible 453. plFiberPlate : 21 possible sky positions to use as objects from a possible 452. plFiberPlate : 27 possible sky positions to use as objects from a possible 451. plFiberPlate : 50 possible sky positions to use as objects from a possible 450. plFiberPlate : 37 possible sky positions to use as objects from a possible 449. plFiberPlate : 29 possible sky positions to use as objects from a possible 448. plFiberPlate : 23 possible sky positions to use as objects from a possible 447. plFiberPlate : 22 possible sky positions to use as objects from a possible 446. plFiberPlate : 15 possible sky positions to use as objects from a possible 445. plFiberPlate : 12 possible sky positions to use as objects from a possible 444. plFiberPlate : 17 possible sky positions to use as objects from a possible 443. plFiberPlate : 12 possible sky positions to use as objects from a possible 442. plFiberPlate : 20 possible sky positions to use as objects from a possible 441. plFiberPlate : 12 possible sky positions to use as objects from a possible 440. plFiberPlate : 15 possible sky positions to use as objects from a possible 439. plFiberPlate : 6 possible sky positions to use as objects from a possible 438. plFiberPlate : 13 possible sky positions to use as objects from a possible 437. plFiberPlate : 16 possible sky positions to use as objects from a possible 436. plFiberPlate : 19 possible sky positions to use as objects from a possible 435. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0866.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0867.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0867.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0868.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 74 2 10 60 3 8 97 4 5 127 5 1 69 6 1 39 7 1 73 8 7 93 9 1 93 10 22 151 11 19 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 199 6 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 198 23 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 207 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 189 79 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 193 20 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 201 37 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 207 33 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 202 20 plFiberPlate : 125 possible sky positions to use as objects from a possible 468. plFiberPlate : 96 possible sky positions to use as objects from a possible 467. plFiberPlate : 56 possible sky positions to use as objects from a possible 466. plFiberPlate : 19 possible sky positions to use as objects from a possible 465. plFiberPlate : 13 possible sky positions to use as objects from a possible 464. plFiberPlate : 41 possible sky positions to use as objects from a possible 463. plFiberPlate : 17 possible sky positions to use as objects from a possible 462. plFiberPlate : 48 possible sky positions to use as objects from a possible 461. plFiberPlate : 47 possible sky positions to use as objects from a possible 460. plFiberPlate : 21 possible sky positions to use as objects from a possible 459. plFiberPlate : 11 possible sky positions to use as objects from a possible 458. plFiberPlate : 5 possible sky positions to use as objects from a possible 457. plFiberPlate : 25 possible sky positions to use as objects from a possible 456. plFiberPlate : 6 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 8 possible sky positions to use as objects from a possible 453. plFiberPlate : 26 possible sky positions to use as objects from a possible 452. plFiberPlate : 26 possible sky positions to use as objects from a possible 451. plFiberPlate : 12 possible sky positions to use as objects from a possible 450. plFiberPlate : 6 possible sky positions to use as objects from a possible 449. plFiberPlate : 7 possible sky positions to use as objects from a possible 448. plFiberPlate : 10 possible sky positions to use as objects from a possible 447. plFiberPlate : 11 possible sky positions to use as objects from a possible 446. plFiberPlate : 9 possible sky positions to use as objects from a possible 445. plFiberPlate : 19 possible sky positions to use as objects from a possible 444. plFiberPlate : 14 possible sky positions to use as objects from a possible 443. plFiberPlate : 7 possible sky positions to use as objects from a possible 442. plFiberPlate : 8 possible sky positions to use as objects from a possible 441. plFiberPlate : 11 possible sky positions to use as objects from a possible 440. plFiberPlate : 7 possible sky positions to use as objects from a possible 439. plFiberPlate : 6 possible sky positions to use as objects from a possible 438. plFiberPlate : 2 possible sky positions to use as objects from a possible 437. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0867.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0868.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0868.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0869.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 84 2 9 67 3 11 87 4 5 104 5 0 74 6 0 49 7 0 86 8 3 100 9 0 111 10 16 142 11 13 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 212 6 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 221 63 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 219 100 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 207 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 201 37 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 223 19 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 207 33 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 217 15 plFiberPlate : 103 possible sky positions to use as objects from a possible 482. plFiberPlate : 94 possible sky positions to use as objects from a possible 481. plFiberPlate : 79 possible sky positions to use as objects from a possible 480. plFiberPlate : 33 possible sky positions to use as objects from a possible 479. plFiberPlate : 25 possible sky positions to use as objects from a possible 478. plFiberPlate : 19 possible sky positions to use as objects from a possible 477. plFiberPlate : 57 possible sky positions to use as objects from a possible 476. plFiberPlate : 61 possible sky positions to use as objects from a possible 475. plFiberPlate : 37 possible sky positions to use as objects from a possible 474. plFiberPlate : 20 possible sky positions to use as objects from a possible 473. plFiberPlate : 12 possible sky positions to use as objects from a possible 472. plFiberPlate : 11 possible sky positions to use as objects from a possible 471. plFiberPlate : 17 possible sky positions to use as objects from a possible 470. plFiberPlate : 4 possible sky positions to use as objects from a possible 469. plFiberPlate : 16 possible sky positions to use as objects from a possible 468. plFiberPlate : 12 possible sky positions to use as objects from a possible 467. plFiberPlate : 51 possible sky positions to use as objects from a possible 466. plFiberPlate : 41 possible sky positions to use as objects from a possible 465. plFiberPlate : 32 possible sky positions to use as objects from a possible 464. plFiberPlate : 22 possible sky positions to use as objects from a possible 463. plFiberPlate : 13 possible sky positions to use as objects from a possible 462. plFiberPlate : 16 possible sky positions to use as objects from a possible 461. plFiberPlate : 6 possible sky positions to use as objects from a possible 460. plFiberPlate : 7 possible sky positions to use as objects from a possible 459. plFiberPlate : 7 possible sky positions to use as objects from a possible 458. plFiberPlate : 26 possible sky positions to use as objects from a possible 457. plFiberPlate : 23 possible sky positions to use as objects from a possible 456. plFiberPlate : 27 possible sky positions to use as objects from a possible 455. plFiberPlate : 12 possible sky positions to use as objects from a possible 454. plFiberPlate : 18 possible sky positions to use as objects from a possible 453. plFiberPlate : 12 possible sky positions to use as objects from a possible 452. plFiberPlate : 25 possible sky positions to use as objects from a possible 451. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0868.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0869.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0869.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0870.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 61 2 8 38 3 6 74 4 2 115 5 2 110 6 3 73 7 1 93 8 4 118 9 2 110 10 10 118 11 8 64 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 217 13 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 222 80 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 239 55 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 217 15 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 232 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 234 45 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 223 19 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 229 84 plFiberPlate : 122 possible sky positions to use as objects from a possible 511. plFiberPlate : 76 possible sky positions to use as objects from a possible 510. plFiberPlate : 62 possible sky positions to use as objects from a possible 509. plFiberPlate : 37 possible sky positions to use as objects from a possible 508. plFiberPlate : 21 possible sky positions to use as objects from a possible 507. plFiberPlate : 23 possible sky positions to use as objects from a possible 506. plFiberPlate : 28 possible sky positions to use as objects from a possible 505. plFiberPlate : 80 possible sky positions to use as objects from a possible 504. plFiberPlate : 41 possible sky positions to use as objects from a possible 503. plFiberPlate : 18 possible sky positions to use as objects from a possible 502. plFiberPlate : 10 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 10 possible sky positions to use as objects from a possible 499. plFiberPlate : 4 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 61 possible sky positions to use as objects from a possible 495. plFiberPlate : 45 possible sky positions to use as objects from a possible 494. plFiberPlate : 30 possible sky positions to use as objects from a possible 493. plFiberPlate : 14 possible sky positions to use as objects from a possible 492. plFiberPlate : 16 possible sky positions to use as objects from a possible 491. plFiberPlate : 1 possible sky positions to use as objects from a possible 490. plFiberPlate : 8 possible sky positions to use as objects from a possible 489. plFiberPlate : 12 possible sky positions to use as objects from a possible 488. plFiberPlate : 23 possible sky positions to use as objects from a possible 487. plFiberPlate : 40 possible sky positions to use as objects from a possible 486. plFiberPlate : 28 possible sky positions to use as objects from a possible 485. plFiberPlate : 11 possible sky positions to use as objects from a possible 484. plFiberPlate : 14 possible sky positions to use as objects from a possible 483. plFiberPlate : 14 possible sky positions to use as objects from a possible 482. plFiberPlate : 8 possible sky positions to use as objects from a possible 481. plFiberPlate : 21 possible sky positions to use as objects from a possible 480. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0869.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0870.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0870.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.01.4/plPlugMapP-0871.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 88 2 7 65 3 6 85 4 1 119 5 0 86 6 0 57 7 0 81 8 1 89 9 0 100 10 11 137 11 11 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 5 at -199.000 131.000 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 239 8 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 246 16 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 255 27 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 253 49 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 240 53 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 251 8 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 244 69 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 251 21 plFiberPlate : 107 possible sky positions to use as objects from a possible 494. plFiberPlate : 80 possible sky positions to use as objects from a possible 493. plFiberPlate : 55 possible sky positions to use as objects from a possible 492. plFiberPlate : 35 possible sky positions to use as objects from a possible 491. plFiberPlate : 29 possible sky positions to use as objects from a possible 490. plFiberPlate : 26 possible sky positions to use as objects from a possible 489. plFiberPlate : 47 possible sky positions to use as objects from a possible 488. plFiberPlate : 78 possible sky positions to use as objects from a possible 487. plFiberPlate : 43 possible sky positions to use as objects from a possible 486. plFiberPlate : 20 possible sky positions to use as objects from a possible 485. plFiberPlate : 11 possible sky positions to use as objects from a possible 484. plFiberPlate : 17 possible sky positions to use as objects from a possible 483. plFiberPlate : 18 possible sky positions to use as objects from a possible 482. plFiberPlate : 5 possible sky positions to use as objects from a possible 481. plFiberPlate : 9 possible sky positions to use as objects from a possible 480. plFiberPlate : 24 possible sky positions to use as objects from a possible 479. plFiberPlate : 51 possible sky positions to use as objects from a possible 478. plFiberPlate : 38 possible sky positions to use as objects from a possible 477. plFiberPlate : 26 possible sky positions to use as objects from a possible 476. plFiberPlate : 8 possible sky positions to use as objects from a possible 475. plFiberPlate : 6 possible sky positions to use as objects from a possible 474. plFiberPlate : 14 possible sky positions to use as objects from a possible 473. plFiberPlate : 12 possible sky positions to use as objects from a possible 472. plFiberPlate : 16 possible sky positions to use as objects from a possible 471. plFiberPlate : 6 possible sky positions to use as objects from a possible 470. plFiberPlate : 40 possible sky positions to use as objects from a possible 469. plFiberPlate : 22 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 41 possible sky positions to use as objects from a possible 466. plFiberPlate : 5 possible sky positions to use as objects from a possible 465. plFiberPlate : 12 possible sky positions to use as objects from a possible 464. plFiberPlate : 8 possible sky positions to use as objects from a possible 463. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0870.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0871.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.01.4/plOverlay-0871.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Jan 23 13:47:37 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_52/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_52 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_5/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 15 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0857.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.7941,-6.7698) and (-11.23,-5.87) plMakeFanucCodes : fixed path between (10.7927,6.7811) and (11.13,5.95) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0857.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.4486,-10.5256) and (-1.31,-12.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0857.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0858.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0858.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0858.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0859.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0859.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0859.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0860.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0860.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0860.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0861.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0861.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0861.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0862.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0862.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.5263,8.1646) and (12.42,2.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0862.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0863.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0863.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0863.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0864.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0864.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0864.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0865.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.2742,-7.6308) and (-10.59,-6.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0865.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0865.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0866.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0866.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0866.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0867.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0867.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0867.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0868.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0868.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0868.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0869.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0869.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0869.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0870.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0870.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0870.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0871.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0871.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.01.4/plFanuc-0871.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Jan 23 13:48:27 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_52/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_52 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_5/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e33668 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 15 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 857 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 858 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 859 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 860 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 861 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 862 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 863 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 864 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 865 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 866 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 867 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 868 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 869 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 870 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 871 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -2.7 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Jan 23 13:48:51 CST 2002 Begin running plateEnder dr2002.01.4 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_3/etc/dervishStartup.tcl: Executing commands in /p/GENERIC_UNIX/dp/v11_52/etc/dpStartup.tcl: loading DP scripts from /p/GENERIC_UNIX/dp/v11_52 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_5/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_6/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Wed Jan 23 13:50:01 CST 2002 ALL DONE PS: Read file for stderr output of this job.