Sender: LSF System Subject: Job 47396: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Mar 13 17:08:46 2002 Results reported at Wed Mar 13 17:11:10 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v12_23 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.03.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 120.06 sec. Max Memory : 8 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Mar 13 17:08:49 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Mar 13 17:08:51 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_15/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v12_23/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_7/OSF1/bin:/sdss/ups/prd/sdssmath/v5_4/OSF1/bin:/sdss/ups/prd/astrotools/v5_6/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Wed Mar 13 17:08:51 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_6/OSF1 DERVISH_DIR=/sdss/ups/prd/dervish/v8_7/OSF1 DP_DIR=/sdss/ups/prd/dp/v12_23/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_15/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_7/OSF1/doc/www/dervish.home.html KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_4/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Wed Mar 13 17:08:51 CST 2002 Begin running plate --------------------------------------------------------------- Wed Mar 13 17:08:51 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e46c68 makePlates : beginning loop over plObs chain; makePlates : making 8 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0717.par makePlates : plateInfo struct for plate 945 : (h2).mjd 52375 (h2).raCen 150.8184 (h2).decCen 55.07983 (h2).haCen 29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.818 55.080 150.818 56.580 plMakePlateFromTile : mjd of obs : 52375.651030 Observed HA/dec of plate center, fiducial point (deg) : 28.998 55.067 28.996 56.567 The rotation angle of the fid. point is -125.668435 plMakePlateFromTile : beginning loop over 1354 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0718.par makePlates : plateInfo struct for plate 946 : (h2).mjd 52375 (h2).raCen 153.7198 (h2).decCen 56.15589 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 153.720 56.156 153.720 57.656 plMakePlateFromTile : mjd of obs : 52375.650754 Observed HA/dec of plate center, fiducial point (deg) : 25.998 56.142 25.996 57.642 The rotation angle of the fid. point is -131.458727 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0719.par makePlates : plateInfo struct for plate 947 : (h2).mjd 52375 (h2).raCen 157.2108 (h2).decCen 56.90629 (h2).haCen 37 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.211 56.906 157.211 58.406 plMakePlateFromTile : mjd of obs : 52375.690914 Observed HA/dec of plate center, fiducial point (deg) : 36.998 56.893 36.996 58.393 The rotation angle of the fid. point is -117.765138 plMakePlateFromTile : beginning loop over 1361 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0720.par makePlates : plateInfo struct for plate 948 : (h2).mjd 52375 (h2).raCen 160.423 (h2).decCen 57.62007 (h2).haCen 34 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 160.423 57.620 160.423 59.120 plMakePlateFromTile : mjd of obs : 52375.691498 Observed HA/dec of plate center, fiducial point (deg) : 33.998 57.606 33.996 59.106 The rotation angle of the fid. point is -122.381974 plMakePlateFromTile : beginning loop over 1370 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0721.par makePlates : plateInfo struct for plate 949 : (h2).mjd 52375 (h2).raCen 163.4011 (h2).decCen 58.14442 (h2).haCen 31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.401 58.144 163.401 59.644 plMakePlateFromTile : mjd of obs : 52375.691433 Observed HA/dec of plate center, fiducial point (deg) : 30.998 58.130 30.996 59.629 The rotation angle of the fid. point is -126.959683 plMakePlateFromTile : beginning loop over 1374 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0722.par makePlates : plateInfo struct for plate 950 : (h2).mjd 52375 (h2).raCen 166.6431 (h2).decCen 58.76532 (h2).haCen 43 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.643 58.765 166.643 60.265 plMakePlateFromTile : mjd of obs : 52375.733676 Observed HA/dec of plate center, fiducial point (deg) : 42.998 58.751 42.996 60.251 The rotation angle of the fid. point is -113.086513 plMakePlateFromTile : beginning loop over 1357 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0723.par makePlates : plateInfo struct for plate 951 : (h2).mjd 52375 (h2).raCen 169.9187 (h2).decCen 59.08138 (h2).haCen 40 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.919 59.081 169.919 60.581 plMakePlateFromTile : mjd of obs : 52375.734434 Observed HA/dec of plate center, fiducial point (deg) : 39.998 59.067 39.996 60.566 The rotation angle of the fid. point is -116.864367 plMakePlateFromTile : beginning loop over 1356 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk38/complete//plPlugMapT-0724.par makePlates : plateInfo struct for plate 952 : (h2).mjd 52375 (h2).raCen 172.8974 (h2).decCen 59.47916 (h2).haCen 37 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.897 59.479 172.897 60.979 plMakePlateFromTile : mjd of obs : 52375.734369 Observed HA/dec of plate center, fiducial point (deg) : 36.998 59.464 36.996 60.963 The rotation angle of the fid. point is -120.904491 plMakePlateFromTile : beginning loop over 1216 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-7.72, 48.22, 7.3) and (-6.95, 48.22, 8.2) checkLTHo : distance = 0.768, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-6.95, 48.22, 8.2) makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Mar 13 17:09:17 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 8 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0945.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 128 2 13 107 3 18 98 4 16 133 5 21 113 6 17 92 7 7 91 8 6 115 9 13 101 10 21 156 11 15 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 216 47 plFiberPlate : adding spectro-photo std with objId = 2987 0 1 31 19 plFiberPlate : adding spectro-photo std with objId = 2987 0 1 28 25 plFiberPlate : adding spectro-photo std with objId = 2243 0 1 212 20 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 218 41 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 216 22 plFiberPlate : adding spectro-photo std with objId = 2987 0 4 26 25 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 220 4 plFiberPlate : 77 possible sky positions to use as objects from a possible 628. plFiberPlate : 43 possible sky positions to use as objects from a possible 627. plFiberPlate : 29 possible sky positions to use as objects from a possible 626. plFiberPlate : 39 possible sky positions to use as objects from a possible 625. plFiberPlate : 28 possible sky positions to use as objects from a possible 624. plFiberPlate : 16 possible sky positions to use as objects from a possible 623. plFiberPlate : 18 possible sky positions to use as objects from a possible 622. plFiberPlate : 57 possible sky positions to use as objects from a possible 621. plFiberPlate : 22 possible sky positions to use as objects from a possible 620. plFiberPlate : 2 possible sky positions to use as objects from a possible 619. plFiberPlate : 8 possible sky positions to use as objects from a possible 618. plFiberPlate : 14 possible sky positions to use as objects from a possible 617. plFiberPlate : 12 possible sky positions to use as objects from a possible 616. plFiberPlate : 9 possible sky positions to use as objects from a possible 615. plFiberPlate : 7 possible sky positions to use as objects from a possible 614. plFiberPlate : 15 possible sky positions to use as objects from a possible 613. plFiberPlate : 51 possible sky positions to use as objects from a possible 612. plFiberPlate : 38 possible sky positions to use as objects from a possible 611. plFiberPlate : 35 possible sky positions to use as objects from a possible 610. plFiberPlate : 17 possible sky positions to use as objects from a possible 609. plFiberPlate : 10 possible sky positions to use as objects from a possible 608. plFiberPlate : 12 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 19 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 30 possible sky positions to use as objects from a possible 603. plFiberPlate : 40 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 21 possible sky positions to use as objects from a possible 597. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0945.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0945.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0946.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 123 2 12 92 3 9 98 4 8 108 5 12 110 6 11 67 7 6 86 8 8 118 9 10 92 10 16 149 11 12 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2987 0 4 34 69 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 218 62 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 229 34 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 218 41 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 222 63 plFiberPlate : adding spectro-photo std with objId = 2987 0 5 47 26 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 222 50 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 220 4 plFiberPlate : 112 possible sky positions to use as objects from a possible 584. plFiberPlate : 99 possible sky positions to use as objects from a possible 583. plFiberPlate : 58 possible sky positions to use as objects from a possible 582. plFiberPlate : 30 possible sky positions to use as objects from a possible 581. plFiberPlate : 41 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 30 possible sky positions to use as objects from a possible 578. plFiberPlate : 75 possible sky positions to use as objects from a possible 577. plFiberPlate : 67 possible sky positions to use as objects from a possible 576. plFiberPlate : 44 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 8 possible sky positions to use as objects from a possible 573. plFiberPlate : 24 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 33 possible sky positions to use as objects from a possible 569. plFiberPlate : 68 possible sky positions to use as objects from a possible 568. plFiberPlate : 39 possible sky positions to use as objects from a possible 567. plFiberPlate : 18 possible sky positions to use as objects from a possible 566. plFiberPlate : 21 possible sky positions to use as objects from a possible 565. plFiberPlate : 13 possible sky positions to use as objects from a possible 564. plFiberPlate : 6 possible sky positions to use as objects from a possible 563. plFiberPlate : 2 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 42 possible sky positions to use as objects from a possible 560. plFiberPlate : 41 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 3 possible sky positions to use as objects from a possible 557. plFiberPlate : 8 possible sky positions to use as objects from a possible 556. plFiberPlate : 17 possible sky positions to use as objects from a possible 555. plFiberPlate : 18 possible sky positions to use as objects from a possible 554. plFiberPlate : 24 possible sky positions to use as objects from a possible 553. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0945.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0946.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0946.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0947.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 120 2 14 107 3 11 99 4 11 119 5 18 130 6 17 110 7 6 99 8 13 106 9 7 125 10 23 152 11 17 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2987 0 3 53 39 plFiberPlate : adding spectro-photo std with objId = 2243 0 1 244 21 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 246 53 plFiberPlate : adding spectro-photo std with objId = 2987 0 3 55 12 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 238 8 plFiberPlate : adding spectro-photo std with objId = 2987 0 5 47 26 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 248 49 plFiberPlate : adding spectro-photo std with objId = 2987 0 5 54 6 plFiberPlate : 131 possible sky positions to use as objects from a possible 639. plFiberPlate : 69 possible sky positions to use as objects from a possible 638. plFiberPlate : 33 possible sky positions to use as objects from a possible 637. plFiberPlate : 13 possible sky positions to use as objects from a possible 636. plFiberPlate : 43 possible sky positions to use as objects from a possible 635. plFiberPlate : 26 possible sky positions to use as objects from a possible 634. plFiberPlate : 62 possible sky positions to use as objects from a possible 633. plFiberPlate : 77 possible sky positions to use as objects from a possible 632. plFiberPlate : 39 possible sky positions to use as objects from a possible 631. plFiberPlate : 17 possible sky positions to use as objects from a possible 630. plFiberPlate : 14 possible sky positions to use as objects from a possible 629. plFiberPlate : 15 possible sky positions to use as objects from a possible 628. plFiberPlate : 5 possible sky positions to use as objects from a possible 627. plFiberPlate : 10 possible sky positions to use as objects from a possible 626. plFiberPlate : 20 possible sky positions to use as objects from a possible 625. plFiberPlate : 17 possible sky positions to use as objects from a possible 624. plFiberPlate : 61 possible sky positions to use as objects from a possible 623. plFiberPlate : 51 possible sky positions to use as objects from a possible 622. plFiberPlate : 23 possible sky positions to use as objects from a possible 621. plFiberPlate : 15 possible sky positions to use as objects from a possible 620. plFiberPlate : 16 possible sky positions to use as objects from a possible 619. plFiberPlate : 12 possible sky positions to use as objects from a possible 618. plFiberPlate : 13 possible sky positions to use as objects from a possible 617. plFiberPlate : 17 possible sky positions to use as objects from a possible 616. plFiberPlate : 9 possible sky positions to use as objects from a possible 615. plFiberPlate : 70 possible sky positions to use as objects from a possible 614. plFiberPlate : 39 possible sky positions to use as objects from a possible 613. plFiberPlate : 23 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 11 possible sky positions to use as objects from a possible 610. plFiberPlate : 27 possible sky positions to use as objects from a possible 609. plFiberPlate : 13 possible sky positions to use as objects from a possible 608. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0946.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0947.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0947.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0948.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 137 2 12 98 3 20 89 4 18 104 5 21 125 6 19 95 7 10 95 8 8 120 9 6 111 10 21 152 11 12 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2987 0 1 63 87 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 246 26 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 259 24 plFiberPlate : adding spectro-photo std with objId = 2987 0 3 63 29 plFiberPlate : adding spectro-photo std with objId = 2863 0 6 219 36 plFiberPlate : adding spectro-photo std with objId = 2987 0 5 71 16 plFiberPlate : adding spectro-photo std with objId = 2987 0 5 69 27 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 248 49 plFiberPlate : 120 possible sky positions to use as objects from a possible 632. plFiberPlate : 83 possible sky positions to use as objects from a possible 631. plFiberPlate : 36 possible sky positions to use as objects from a possible 630. plFiberPlate : 22 possible sky positions to use as objects from a possible 629. plFiberPlate : 37 possible sky positions to use as objects from a possible 628. plFiberPlate : 39 possible sky positions to use as objects from a possible 627. plFiberPlate : 26 possible sky positions to use as objects from a possible 626. plFiberPlate : 82 possible sky positions to use as objects from a possible 625. plFiberPlate : 67 possible sky positions to use as objects from a possible 624. plFiberPlate : 37 possible sky positions to use as objects from a possible 623. plFiberPlate : 22 possible sky positions to use as objects from a possible 622. plFiberPlate : 13 possible sky positions to use as objects from a possible 621. plFiberPlate : 7 possible sky positions to use as objects from a possible 620. plFiberPlate : 14 possible sky positions to use as objects from a possible 619. plFiberPlate : 28 possible sky positions to use as objects from a possible 618. plFiberPlate : 38 possible sky positions to use as objects from a possible 617. plFiberPlate : 77 possible sky positions to use as objects from a possible 616. plFiberPlate : 34 possible sky positions to use as objects from a possible 615. plFiberPlate : 24 possible sky positions to use as objects from a possible 614. plFiberPlate : 15 possible sky positions to use as objects from a possible 613. plFiberPlate : 15 possible sky positions to use as objects from a possible 612. plFiberPlate : 6 possible sky positions to use as objects from a possible 611. plFiberPlate : 13 possible sky positions to use as objects from a possible 610. plFiberPlate : 29 possible sky positions to use as objects from a possible 609. plFiberPlate : 13 possible sky positions to use as objects from a possible 608. plFiberPlate : 48 possible sky positions to use as objects from a possible 607. plFiberPlate : 22 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 22 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 22 possible sky positions to use as objects from a possible 601. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0947.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0948.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0948.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0949.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 117 2 9 104 3 11 105 4 11 122 5 12 138 6 14 112 7 13 105 8 14 114 9 13 124 10 11 166 11 8 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 255 21 plFiberPlate : adding spectro-photo std with objId = 2826 0 6 217 20 plFiberPlate : adding spectro-photo std with objId = 2987 0 1 85 40 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 270 38 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 256 70 plFiberPlate : adding spectro-photo std with objId = 2987 0 6 80 7 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 258 88 plFiberPlate : adding spectro-photo std with objId = 2987 0 5 71 16 plFiberPlate : 155 possible sky positions to use as objects from a possible 663. plFiberPlate : 81 possible sky positions to use as objects from a possible 662. plFiberPlate : 29 possible sky positions to use as objects from a possible 661. plFiberPlate : 30 possible sky positions to use as objects from a possible 660. plFiberPlate : 49 possible sky positions to use as objects from a possible 659. plFiberPlate : 19 possible sky positions to use as objects from a possible 658. plFiberPlate : 18 possible sky positions to use as objects from a possible 657. plFiberPlate : 81 possible sky positions to use as objects from a possible 656. plFiberPlate : 69 possible sky positions to use as objects from a possible 655. plFiberPlate : 37 possible sky positions to use as objects from a possible 654. plFiberPlate : 28 possible sky positions to use as objects from a possible 653. plFiberPlate : 21 possible sky positions to use as objects from a possible 652. plFiberPlate : 18 possible sky positions to use as objects from a possible 651. plFiberPlate : 11 possible sky positions to use as objects from a possible 650. plFiberPlate : 11 possible sky positions to use as objects from a possible 649. plFiberPlate : 25 possible sky positions to use as objects from a possible 648. plFiberPlate : 88 possible sky positions to use as objects from a possible 647. plFiberPlate : 75 possible sky positions to use as objects from a possible 646. plFiberPlate : 39 possible sky positions to use as objects from a possible 645. plFiberPlate : 35 possible sky positions to use as objects from a possible 644. plFiberPlate : 21 possible sky positions to use as objects from a possible 643. plFiberPlate : 25 possible sky positions to use as objects from a possible 642. plFiberPlate : 22 possible sky positions to use as objects from a possible 641. plFiberPlate : 21 possible sky positions to use as objects from a possible 640. plFiberPlate : 8 possible sky positions to use as objects from a possible 639. plFiberPlate : 41 possible sky positions to use as objects from a possible 638. plFiberPlate : 53 possible sky positions to use as objects from a possible 637. plFiberPlate : 30 possible sky positions to use as objects from a possible 636. plFiberPlate : 17 possible sky positions to use as objects from a possible 635. plFiberPlate : 18 possible sky positions to use as objects from a possible 634. plFiberPlate : 17 possible sky positions to use as objects from a possible 633. plFiberPlate : 23 possible sky positions to use as objects from a possible 632. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0948.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0949.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0949.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0950.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 117 2 18 89 3 15 81 4 13 115 5 20 126 6 25 102 7 13 100 8 7 116 9 8 110 10 23 133 11 18 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 0 1 270 35 plFiberPlate : adding spectro-photo std with objId = 2987 0 1 85 40 plFiberPlate : adding spectro-photo std with objId = 2987 0 4 99 20 plFiberPlate : adding spectro-photo std with objId = 2987 0 2 93 2 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 270 38 plFiberPlate : adding spectro-photo std with objId = 2243 0 4 278 25 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 281 8 plFiberPlate : adding spectro-photo std with objId = 2987 0 4 94 18 plFiberPlate : 106 possible sky positions to use as objects from a possible 611. plFiberPlate : 93 possible sky positions to use as objects from a possible 610. plFiberPlate : 59 possible sky positions to use as objects from a possible 609. plFiberPlate : 20 possible sky positions to use as objects from a possible 608. plFiberPlate : 29 possible sky positions to use as objects from a possible 607. plFiberPlate : 30 possible sky positions to use as objects from a possible 606. plFiberPlate : 56 possible sky positions to use as objects from a possible 605. plFiberPlate : 91 possible sky positions to use as objects from a possible 604. plFiberPlate : 60 possible sky positions to use as objects from a possible 603. plFiberPlate : 32 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 12 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : 27 possible sky positions to use as objects from a possible 597. plFiberPlate : 17 possible sky positions to use as objects from a possible 596. plFiberPlate : 72 possible sky positions to use as objects from a possible 595. plFiberPlate : 35 possible sky positions to use as objects from a possible 594. plFiberPlate : 22 possible sky positions to use as objects from a possible 593. plFiberPlate : 9 possible sky positions to use as objects from a possible 592. plFiberPlate : 7 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 11 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 23 possible sky positions to use as objects from a possible 587. plFiberPlate : 44 possible sky positions to use as objects from a possible 586. plFiberPlate : 23 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : 9 possible sky positions to use as objects from a possible 583. plFiberPlate : 31 possible sky positions to use as objects from a possible 582. plFiberPlate : 21 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0949.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0950.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0950.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0951.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 110 2 9 84 3 14 103 4 14 122 5 15 135 6 16 106 7 6 96 8 13 110 9 12 110 10 17 156 11 8 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2987 0 1 103 70 plFiberPlate : adding spectro-photo std with objId = 2987 0 2 93 2 plFiberPlate : adding spectro-photo std with objId = 2987 0 4 106 46 plFiberPlate : adding spectro-photo std with objId = 2987 0 4 94 18 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 293 48 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 289 29 plFiberPlate : adding spectro-photo std with objId = 2987 0 6 100 4 plFiberPlate : adding spectro-photo std with objId = 2987 0 2 100 31 plFiberPlate : 118 possible sky positions to use as objects from a possible 629. plFiberPlate : 87 possible sky positions to use as objects from a possible 628. plFiberPlate : 40 possible sky positions to use as objects from a possible 627. plFiberPlate : 42 possible sky positions to use as objects from a possible 626. plFiberPlate : 26 possible sky positions to use as objects from a possible 625. plFiberPlate : 25 possible sky positions to use as objects from a possible 624. plFiberPlate : 30 possible sky positions to use as objects from a possible 623. plFiberPlate : 99 possible sky positions to use as objects from a possible 622. plFiberPlate : 54 possible sky positions to use as objects from a possible 621. plFiberPlate : 44 possible sky positions to use as objects from a possible 620. plFiberPlate : 23 possible sky positions to use as objects from a possible 619. plFiberPlate : 14 possible sky positions to use as objects from a possible 618. plFiberPlate : 11 possible sky positions to use as objects from a possible 617. plFiberPlate : 14 possible sky positions to use as objects from a possible 616. plFiberPlate : 25 possible sky positions to use as objects from a possible 615. plFiberPlate : 18 possible sky positions to use as objects from a possible 614. plFiberPlate : 103 possible sky positions to use as objects from a possible 613. plFiberPlate : 65 possible sky positions to use as objects from a possible 612. plFiberPlate : 49 possible sky positions to use as objects from a possible 611. plFiberPlate : 15 possible sky positions to use as objects from a possible 610. plFiberPlate : 8 possible sky positions to use as objects from a possible 609. plFiberPlate : 17 possible sky positions to use as objects from a possible 608. plFiberPlate : 25 possible sky positions to use as objects from a possible 607. plFiberPlate : 11 possible sky positions to use as objects from a possible 606. plFiberPlate : 23 possible sky positions to use as objects from a possible 605. plFiberPlate : 51 possible sky positions to use as objects from a possible 604. plFiberPlate : 27 possible sky positions to use as objects from a possible 603. plFiberPlate : 12 possible sky positions to use as objects from a possible 602. plFiberPlate : 8 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 27 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0950.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0951.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0951.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.3/plPlugMapP-0952.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 86 2 7 76 3 7 83 4 10 121 5 8 136 6 10 102 7 7 73 8 3 55 9 13 102 10 19 156 11 9 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2987 0 1 104 77 plFiberPlate : adding spectro-photo std with objId = 2243 0 6 299 2 plFiberPlate : adding spectro-photo std with objId = 2243 0 3 291 26 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 301 20 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 291 39 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 298 30 plFiberPlate : adding spectro-photo std with objId = 2243 0 2 293 48 plFiberPlate : adding spectro-photo std with objId = 2243 0 5 289 29 plFiberPlate : 129 possible sky positions to use as objects from a possible 521. plFiberPlate : 62 possible sky positions to use as objects from a possible 520. plFiberPlate : 32 possible sky positions to use as objects from a possible 519. plFiberPlate : 25 possible sky positions to use as objects from a possible 518. plFiberPlate : 32 possible sky positions to use as objects from a possible 517. plFiberPlate : 21 possible sky positions to use as objects from a possible 516. plFiberPlate : 35 possible sky positions to use as objects from a possible 515. plFiberPlate : 85 possible sky positions to use as objects from a possible 514. plFiberPlate : 65 possible sky positions to use as objects from a possible 513. plFiberPlate : 54 possible sky positions to use as objects from a possible 512. plFiberPlate : 34 possible sky positions to use as objects from a possible 511. plFiberPlate : 20 possible sky positions to use as objects from a possible 510. plFiberPlate : 28 possible sky positions to use as objects from a possible 509. plFiberPlate : 5 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 14 possible sky positions to use as objects from a possible 506. plFiberPlate : 54 possible sky positions to use as objects from a possible 505. plFiberPlate : 51 possible sky positions to use as objects from a possible 504. plFiberPlate : 42 possible sky positions to use as objects from a possible 503. plFiberPlate : 16 possible sky positions to use as objects from a possible 502. plFiberPlate : 4 possible sky positions to use as objects from a possible 501. plFiberPlate : 11 possible sky positions to use as objects from a possible 500. plFiberPlate : 8 possible sky positions to use as objects from a possible 499. plFiberPlate : 15 possible sky positions to use as objects from a possible 498. plFiberPlate : 7 possible sky positions to use as objects from a possible 497. plFiberPlate : 53 possible sky positions to use as objects from a possible 496. plFiberPlate : 41 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 15 possible sky positions to use as objects from a possible 493. plFiberPlate : 11 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : 10 possible sky positions to use as objects from a possible 490. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0951.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0952.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.3/plOverlay-0952.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Mar 13 17:09:42 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 8 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0945.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0945.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0945.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0946.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0955,-6.3263) and (-11.44,-5.43) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0946.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0946.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0947.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.8070,-6.8449) and (11.17,-6.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0947.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0947.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0948.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4082,5.7890) and (11.80,4.89) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0948.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0948.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0949.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5031,6.8456) and (-11.72,4.98) plMakeFanucCodes : fixed path between (-12.5468,1.9369) and (-12.75,0.81) plMakeFanucCodes : fixed path between (-5.4260,-11.5492) and (-4.71,-11.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0949.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0949.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0950.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.6794,5.2019) and (11.84,3.73) plMakeFanucCodes : fixed path between (-12.2202,-3.6714) and (-12.40,-2.61) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0950.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0950.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0951.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9804,-6.1796) and (-11.66,-5.05) plMakeFanucCodes : fixed path between (-11.6638,-5.0492) and (-12.17,-3.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0951.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0951.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0952.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0952.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.3/plFanuc-0952.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.9094,-9.1463) and (-1.32,-11.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Mar 13 17:10:08 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e46c68 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 8 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 945 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 946 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 947 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 948 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 949 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 950 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 951 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 952 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Mar 13 17:10:27 CST 2002 Begin running plateEnder dr2002.03.3 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Wed Mar 13 17:11:08 CST 2002 ALL DONE PS: Read file for stderr output of this job.