Sender: LSF System Subject: Job 43426: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Apr 17 17:54:29 2002 Results reported at Wed Apr 17 17:56:55 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v13_34 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.04.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 127.90 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Apr 17 17:54:32 CDT 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Apr 17 17:54:36 CDT 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_17/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v13_34/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_9/OSF1/bin:/sdss/ups/prd/sdssmath/v5_6/OSF1/bin:/sdss/ups/prd/astrotools/v5_8/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Wed Apr 17 17:54:36 CDT 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_8/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_9/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v13_34/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_17/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_9/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_2/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_6/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a --------------------------------------------------------------- Wed Apr 17 17:54:36 CDT 2002 Begin running plate --------------------------------------------------------------- Wed Apr 17 17:54:36 CDT 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e61368 makePlates : beginning loop over plObs chain; makePlates : making 9 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0751.par makePlates : plateInfo struct for plate 972 : (h2).mjd 52404 (h2).raCen 254.8121 (h2).decCen 34.2097 (h2).haCen 15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.812 34.210 254.812 35.710 plMakePlateFromTile : mjd of obs : 52404.821082 Observed HA/dec of plate center, fiducial point (deg) : 14.998 34.204 14.998 35.703 The rotation angle of the fid. point is -92.310288 plMakePlateFromTile : beginning loop over 1267 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0750.par makePlates : plateInfo struct for plate 973 : (h2).mjd 52404 (h2).raCen 255.8052 (h2).decCen 32.77728 (h2).haCen 14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 255.805 32.777 255.805 34.277 plMakePlateFromTile : mjd of obs : 52404.821063 Observed HA/dec of plate center, fiducial point (deg) : 13.998 32.772 13.998 34.271 The rotation angle of the fid. point is -86.166849 plMakePlateFromTile : beginning loop over 1259 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0752.par makePlates : plateInfo struct for plate 974 : (h2).mjd 52404 (h2).raCen 256.3894 (h2).decCen 34.49458 (h2).haCen 13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 256.389 34.495 256.389 35.995 plMakePlateFromTile : mjd of obs : 52404.819909 Observed HA/dec of plate center, fiducial point (deg) : 12.998 34.489 12.998 35.988 The rotation angle of the fid. point is -95.332239 plMakePlateFromTile : beginning loop over 1149 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0746.par makePlates : plateInfo struct for plate 975 : (h2).mjd 52404 (h2).raCen 257.0836 (h2).decCen 30.58154 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 257.084 30.582 257.084 32.082 plMakePlateFromTile : mjd of obs : 52404.819063 Observed HA/dec of plate center, fiducial point (deg) : 11.998 30.577 11.998 32.076 The rotation angle of the fid. point is -74.717600 plMakePlateFromTile : beginning loop over 1106 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0747.par makePlates : plateInfo struct for plate 976 : (h2).mjd 52404 (h2).raCen 257.5742 (h2).decCen 32.16532 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 257.574 32.165 257.574 33.665 plMakePlateFromTile : mjd of obs : 52404.820421 Observed HA/dec of plate center, fiducial point (deg) : 11.998 32.160 11.998 33.660 The rotation angle of the fid. point is -83.289479 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0744.par makePlates : plateInfo struct for plate 977 : (h2).mjd 52404 (h2).raCen 258.2214 (h2).decCen 29.00306 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 258.221 29.003 258.221 30.503 plMakePlateFromTile : mjd of obs : 52404.861009 Observed HA/dec of plate center, fiducial point (deg) : 25.998 29.000 25.998 30.499 The rotation angle of the fid. point is -73.791977 plMakePlateFromTile : beginning loop over 1089 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0745.par makePlates : plateInfo struct for plate 978 : (h2).mjd 52404 (h2).raCen 258.9913 (h2).decCen 30.39468 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 258.991 30.395 258.991 31.895 plMakePlateFromTile : mjd of obs : 52404.863141 Observed HA/dec of plate center, fiducial point (deg) : 25.998 30.391 25.998 31.891 The rotation angle of the fid. point is -77.060102 plMakePlateFromTile : beginning loop over 1158 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0749.par makePlates : plateInfo struct for plate 979 : (h2).mjd 52404 (h2).raCen 259.8709 (h2).decCen 26.98177 (h2).haCen 25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 259.871 26.982 259.871 28.482 plMakePlateFromTile : mjd of obs : 52404.862808 Observed HA/dec of plate center, fiducial point (deg) : 24.998 26.979 24.998 28.479 The rotation angle of the fid. point is -68.949345 plMakePlateFromTile : beginning loop over 962 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk41/complete//plPlugMapT-0748.par makePlates : plateInfo struct for plate 980 : (h2).mjd 52404 (h2).raCen 260.2126 (h2).decCen 28.32012 (h2).haCen 24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 260.213 28.320 260.213 29.820 plMakePlateFromTile : mjd of obs : 52404.860983 Observed HA/dec of plate center, fiducial point (deg) : 23.998 28.317 23.998 29.817 The rotation angle of the fid. point is -71.828563 plMakePlateFromTile : beginning loop over 1082 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Apr 17 17:55:04 CDT 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 9 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0972.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 91 2 18 72 3 11 67 4 9 68 5 34 102 6 23 84 7 20 72 8 20 92 9 31 90 10 29 131 11 23 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 107 93 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 109 142 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 103 81 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 105 82 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 108 26 plFiberPlate : adding spectro-photo std with objId = 2335 0 3 72 57 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 111 65 plFiberPlate : adding spectro-photo std with objId = 2335 0 2 72 14 plFiberPlate : 80 possible sky positions to use as objects from a possible 476. plFiberPlate : 44 possible sky positions to use as objects from a possible 475. plFiberPlate : 30 possible sky positions to use as objects from a possible 474. plFiberPlate : 24 possible sky positions to use as objects from a possible 473. plFiberPlate : 13 possible sky positions to use as objects from a possible 472. plFiberPlate : 17 possible sky positions to use as objects from a possible 471. plFiberPlate : 35 possible sky positions to use as objects from a possible 470. plFiberPlate : 67 possible sky positions to use as objects from a possible 469. plFiberPlate : 50 possible sky positions to use as objects from a possible 468. plFiberPlate : 27 possible sky positions to use as objects from a possible 467. plFiberPlate : 31 possible sky positions to use as objects from a possible 466. plFiberPlate : 16 possible sky positions to use as objects from a possible 465. plFiberPlate : 2 possible sky positions to use as objects from a possible 464. plFiberPlate : 3 possible sky positions to use as objects from a possible 463. plFiberPlate : 9 possible sky positions to use as objects from a possible 462. plFiberPlate : 14 possible sky positions to use as objects from a possible 461. plFiberPlate : 51 possible sky positions to use as objects from a possible 460. plFiberPlate : 34 possible sky positions to use as objects from a possible 459. plFiberPlate : 20 possible sky positions to use as objects from a possible 458. plFiberPlate : 14 possible sky positions to use as objects from a possible 457. plFiberPlate : 12 possible sky positions to use as objects from a possible 456. plFiberPlate : 9 possible sky positions to use as objects from a possible 455. plFiberPlate : 2 possible sky positions to use as objects from a possible 454. plFiberPlate : 15 possible sky positions to use as objects from a possible 453. plFiberPlate : 12 possible sky positions to use as objects from a possible 452. plFiberPlate : 73 possible sky positions to use as objects from a possible 451. plFiberPlate : 31 possible sky positions to use as objects from a possible 450. plFiberPlate : 16 possible sky positions to use as objects from a possible 449. plFiberPlate : 12 possible sky positions to use as objects from a possible 448. plFiberPlate : 3 possible sky positions to use as objects from a possible 447. plFiberPlate : 16 possible sky positions to use as objects from a possible 446. plFiberPlate : 7 possible sky positions to use as objects from a possible 445. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0972.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0972.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0973.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 137 2 10 90 3 11 37 4 8 46 5 25 102 6 19 82 7 22 72 8 16 105 9 25 84 10 29 124 11 19 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 112 56 plFiberPlate : adding spectro-photo std with objId = 2335 0 2 94 27 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 105 82 plFiberPlate : adding spectro-photo std with objId = 2328 0 2 116 39 plFiberPlate : adding spectro-photo std with objId = 2248 0 3 222 44 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 108 26 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 111 65 plFiberPlate : adding spectro-photo std with objId = 2335 0 3 89 69 plFiberPlate : 53 possible sky positions to use as objects from a possible 487. plFiberPlate : 44 possible sky positions to use as objects from a possible 486. plFiberPlate : 34 possible sky positions to use as objects from a possible 485. plFiberPlate : 18 possible sky positions to use as objects from a possible 484. plFiberPlate : 18 possible sky positions to use as objects from a possible 483. plFiberPlate : 55 possible sky positions to use as objects from a possible 482. plFiberPlate : 84 possible sky positions to use as objects from a possible 481. plFiberPlate : 40 possible sky positions to use as objects from a possible 480. plFiberPlate : 29 possible sky positions to use as objects from a possible 479. plFiberPlate : 20 possible sky positions to use as objects from a possible 478. plFiberPlate : 23 possible sky positions to use as objects from a possible 477. plFiberPlate : 25 possible sky positions to use as objects from a possible 476. plFiberPlate : 15 possible sky positions to use as objects from a possible 475. plFiberPlate : 3 possible sky positions to use as objects from a possible 474. plFiberPlate : 33 possible sky positions to use as objects from a possible 473. plFiberPlate : 30 possible sky positions to use as objects from a possible 472. plFiberPlate : 50 possible sky positions to use as objects from a possible 471. plFiberPlate : 42 possible sky positions to use as objects from a possible 470. plFiberPlate : 17 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 3 possible sky positions to use as objects from a possible 467. plFiberPlate : 5 possible sky positions to use as objects from a possible 466. plFiberPlate : 20 possible sky positions to use as objects from a possible 465. plFiberPlate : 26 possible sky positions to use as objects from a possible 464. plFiberPlate : 16 possible sky positions to use as objects from a possible 463. plFiberPlate : 36 possible sky positions to use as objects from a possible 462. plFiberPlate : 17 possible sky positions to use as objects from a possible 461. plFiberPlate : 2 possible sky positions to use as objects from a possible 460. plFiberPlate : 1 possible sky positions to use as objects from a possible 459. plFiberPlate : 13 possible sky positions to use as objects from a possible 458. plFiberPlate : 8 possible sky positions to use as objects from a possible 457. plFiberPlate : 8 possible sky positions to use as objects from a possible 456. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0972.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0973.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0973.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0974.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 58 2 17 79 3 20 80 4 20 85 5 23 111 6 17 71 7 6 23 8 6 9 9 13 72 10 36 129 11 19 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2248 0 4 203 63 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 105 82 plFiberPlate : adding spectro-photo std with objId = 2335 0 5 83 75 plFiberPlate : adding spectro-photo std with objId = 2335 0 3 72 57 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 108 26 plFiberPlate : adding spectro-photo std with objId = 2335 0 2 72 14 plFiberPlate : adding spectro-photo std with objId = 2248 0 5 213 30 plFiberPlate : adding spectro-photo std with objId = 2335 0 3 89 69 plFiberPlate : 92 possible sky positions to use as objects from a possible 383. plFiberPlate : 57 possible sky positions to use as objects from a possible 382. plFiberPlate : 31 possible sky positions to use as objects from a possible 381. plFiberPlate : 22 possible sky positions to use as objects from a possible 380. plFiberPlate : 39 possible sky positions to use as objects from a possible 379. plFiberPlate : 10 possible sky positions to use as objects from a possible 378. plFiberPlate : 7 possible sky positions to use as objects from a possible 377. plFiberPlate : 70 possible sky positions to use as objects from a possible 376. plFiberPlate : 48 possible sky positions to use as objects from a possible 375. plFiberPlate : 25 possible sky positions to use as objects from a possible 374. plFiberPlate : 16 possible sky positions to use as objects from a possible 373. plFiberPlate : 12 possible sky positions to use as objects from a possible 372. plFiberPlate : 6 possible sky positions to use as objects from a possible 371. plFiberPlate : 7 possible sky positions to use as objects from a possible 370. plFiberPlate : 7 possible sky positions to use as objects from a possible 369. plFiberPlate : 3 possible sky positions to use as objects from a possible 368. plFiberPlate : 72 possible sky positions to use as objects from a possible 367. plFiberPlate : 55 possible sky positions to use as objects from a possible 366. plFiberPlate : 31 possible sky positions to use as objects from a possible 365. plFiberPlate : 13 possible sky positions to use as objects from a possible 364. plFiberPlate : 8 possible sky positions to use as objects from a possible 363. plFiberPlate : 6 possible sky positions to use as objects from a possible 362. plFiberPlate : 4 possible sky positions to use as objects from a possible 361. plFiberPlate : 5 possible sky positions to use as objects from a possible 360. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 359. plFiberPlate: No sky found for bundle at 170.515 -0.330, increase box by 110 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 359. plFiberPlate : 43 possible sky positions to use as objects from a possible 358. plFiberPlate : 36 possible sky positions to use as objects from a possible 357. plFiberPlate : 30 possible sky positions to use as objects from a possible 356. plFiberPlate : 26 possible sky positions to use as objects from a possible 355. plFiberPlate : 12 possible sky positions to use as objects from a possible 354. plFiberPlate : 7 possible sky positions to use as objects from a possible 353. plFiberPlate : 9 possible sky positions to use as objects from a possible 352. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0973.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0974.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0974.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0975.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 99 2 13 65 3 1 13 4 1 8 5 15 54 6 13 64 7 15 78 8 20 98 9 18 83 10 15 83 11 19 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 129 100 plFiberPlate : adding spectro-photo std with objId = 2248 0 2 228 40 plFiberPlate : adding spectro-photo std with objId = 2335 0 3 102 99 plFiberPlate : adding spectro-photo std with objId = 2305 0 2 127 50 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 137 45 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 122 32 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 130 41 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 136 72 plFiberPlate : 21 possible sky positions to use as objects from a possible 358. plFiberPlate : 12 possible sky positions to use as objects from a possible 357. plFiberPlate : 11 possible sky positions to use as objects from a possible 356. plFiberPlate : 10 possible sky positions to use as objects from a possible 355. plFiberPlate : 24 possible sky positions to use as objects from a possible 354. plFiberPlate : 25 possible sky positions to use as objects from a possible 353. plFiberPlate : 35 possible sky positions to use as objects from a possible 352. plFiberPlate : 16 possible sky positions to use as objects from a possible 351. plFiberPlate : 29 possible sky positions to use as objects from a possible 350. plFiberPlate : 22 possible sky positions to use as objects from a possible 349. plFiberPlate : 19 possible sky positions to use as objects from a possible 348. plFiberPlate : 8 possible sky positions to use as objects from a possible 347. plFiberPlate : 3 possible sky positions to use as objects from a possible 346. plFiberPlate : 24 possible sky positions to use as objects from a possible 345. plFiberPlate : 26 possible sky positions to use as objects from a possible 344. plFiberPlate : 16 possible sky positions to use as objects from a possible 343. plFiberPlate : 29 possible sky positions to use as objects from a possible 342. plFiberPlate : 25 possible sky positions to use as objects from a possible 341. plFiberPlate : 24 possible sky positions to use as objects from a possible 340. plFiberPlate : 16 possible sky positions to use as objects from a possible 339. plFiberPlate : 9 possible sky positions to use as objects from a possible 338. plFiberPlate : 13 possible sky positions to use as objects from a possible 337. plFiberPlate : 19 possible sky positions to use as objects from a possible 336. plFiberPlate : 13 possible sky positions to use as objects from a possible 335. plFiberPlate : 22 possible sky positions to use as objects from a possible 334. plFiberPlate : 25 possible sky positions to use as objects from a possible 333. plFiberPlate : 20 possible sky positions to use as objects from a possible 332. plFiberPlate : 16 possible sky positions to use as objects from a possible 331. plFiberPlate : 14 possible sky positions to use as objects from a possible 330. plFiberPlate : 8 possible sky positions to use as objects from a possible 329. plFiberPlate : 11 possible sky positions to use as objects from a possible 328. plFiberPlate : 11 possible sky positions to use as objects from a possible 327. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0974.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0975.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0975.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0976.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 107 2 20 107 3 14 79 4 9 88 5 13 109 6 9 82 7 8 46 8 6 46 9 13 95 10 24 148 11 25 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2335 0 3 102 99 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 122 32 plFiberPlate : adding spectro-photo std with objId = 2335 0 4 99 172 plFiberPlate : adding spectro-photo std with objId = 2305 0 5 126 60 plFiberPlate : adding spectro-photo std with objId = 2248 0 3 222 44 plFiberPlate : adding spectro-photo std with objId = 2248 0 4 223 54 plFiberPlate : adding spectro-photo std with objId = 2248 0 5 219 65 plFiberPlate : adding spectro-photo std with objId = 2335 0 3 89 69 plFiberPlate : 91 possible sky positions to use as objects from a possible 482. plFiberPlate : 67 possible sky positions to use as objects from a possible 481. plFiberPlate : 78 possible sky positions to use as objects from a possible 480. plFiberPlate : 68 possible sky positions to use as objects from a possible 479. plFiberPlate : 54 possible sky positions to use as objects from a possible 478. plFiberPlate : 76 possible sky positions to use as objects from a possible 477. plFiberPlate : 39 possible sky positions to use as objects from a possible 476. plFiberPlate : 54 possible sky positions to use as objects from a possible 475. plFiberPlate : 50 possible sky positions to use as objects from a possible 474. plFiberPlate : 34 possible sky positions to use as objects from a possible 473. plFiberPlate : 10 possible sky positions to use as objects from a possible 472. plFiberPlate : 10 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 10 possible sky positions to use as objects from a possible 469. plFiberPlate : 5 possible sky positions to use as objects from a possible 468. plFiberPlate : 12 possible sky positions to use as objects from a possible 467. plFiberPlate : 60 possible sky positions to use as objects from a possible 466. plFiberPlate : 54 possible sky positions to use as objects from a possible 465. plFiberPlate : 41 possible sky positions to use as objects from a possible 464. plFiberPlate : 28 possible sky positions to use as objects from a possible 463. plFiberPlate : 8 possible sky positions to use as objects from a possible 462. plFiberPlate : 5 possible sky positions to use as objects from a possible 461. plFiberPlate : 16 possible sky positions to use as objects from a possible 460. plFiberPlate : 7 possible sky positions to use as objects from a possible 459. plFiberPlate : 11 possible sky positions to use as objects from a possible 458. plFiberPlate : 30 possible sky positions to use as objects from a possible 457. plFiberPlate : 33 possible sky positions to use as objects from a possible 456. plFiberPlate : 22 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 12 possible sky positions to use as objects from a possible 453. plFiberPlate : 10 possible sky positions to use as objects from a possible 452. plFiberPlate : 4 possible sky positions to use as objects from a possible 451. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0975.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0976.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0976.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0977.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 70 2 23 55 3 3 15 4 2 13 5 14 52 6 18 58 7 12 68 8 13 87 9 13 81 10 27 84 11 28 63 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 151 165 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 146 129 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 148 55 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 137 45 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 138 112 plFiberPlate : adding spectro-photo std with objId = 2335 0 2 119 44 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 152 27 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 136 72 plFiberPlate : 14 possible sky positions to use as objects from a possible 322. plFiberPlate : 9 possible sky positions to use as objects from a possible 321. plFiberPlate : 18 possible sky positions to use as objects from a possible 320. plFiberPlate : 24 possible sky positions to use as objects from a possible 319. plFiberPlate : 14 possible sky positions to use as objects from a possible 318. plFiberPlate : 9 possible sky positions to use as objects from a possible 317. plFiberPlate : 20 possible sky positions to use as objects from a possible 316. plFiberPlate : 23 possible sky positions to use as objects from a possible 315. plFiberPlate : 14 possible sky positions to use as objects from a possible 314. plFiberPlate : 2 possible sky positions to use as objects from a possible 313. plFiberPlate : 8 possible sky positions to use as objects from a possible 312. plFiberPlate : 9 possible sky positions to use as objects from a possible 311. plFiberPlate : 11 possible sky positions to use as objects from a possible 310. plFiberPlate : 7 possible sky positions to use as objects from a possible 309. plFiberPlate : 4 possible sky positions to use as objects from a possible 308. plFiberPlate : 10 possible sky positions to use as objects from a possible 307. plFiberPlate : 30 possible sky positions to use as objects from a possible 306. plFiberPlate : 28 possible sky positions to use as objects from a possible 305. plFiberPlate : 26 possible sky positions to use as objects from a possible 304. plFiberPlate : 15 possible sky positions to use as objects from a possible 303. plFiberPlate : 5 possible sky positions to use as objects from a possible 302. plFiberPlate : 6 possible sky positions to use as objects from a possible 301. plFiberPlate : 18 possible sky positions to use as objects from a possible 300. plFiberPlate : 10 possible sky positions to use as objects from a possible 299. plFiberPlate : 8 possible sky positions to use as objects from a possible 298. plFiberPlate : 27 possible sky positions to use as objects from a possible 297. plFiberPlate : 22 possible sky positions to use as objects from a possible 296. plFiberPlate : 16 possible sky positions to use as objects from a possible 295. plFiberPlate : 12 possible sky positions to use as objects from a possible 294. plFiberPlate : 8 possible sky positions to use as objects from a possible 293. plFiberPlate : 14 possible sky positions to use as objects from a possible 292. plFiberPlate : 7 possible sky positions to use as objects from a possible 291. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0976.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0977.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0977.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0978.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 62 2 12 81 3 12 72 4 20 87 5 26 103 6 19 71 7 6 28 8 3 21 9 17 67 10 23 120 11 13 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 132 134 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 133 133 plFiberPlate : adding spectro-photo std with objId = 2248 0 4 229 11 plFiberPlate : adding spectro-photo std with objId = 2328 0 4 138 112 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 137 45 plFiberPlate : adding spectro-photo std with objId = 2335 0 2 119 44 plFiberPlate : adding spectro-photo std with objId = 2248 0 4 233 137 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 136 72 plFiberPlate : 86 possible sky positions to use as objects from a possible 382. plFiberPlate : 72 possible sky positions to use as objects from a possible 381. plFiberPlate : 45 possible sky positions to use as objects from a possible 380. plFiberPlate : 36 possible sky positions to use as objects from a possible 379. plFiberPlate : 37 possible sky positions to use as objects from a possible 378. plFiberPlate : 29 possible sky positions to use as objects from a possible 377. plFiberPlate : 12 possible sky positions to use as objects from a possible 376. plFiberPlate : 67 possible sky positions to use as objects from a possible 375. plFiberPlate : 39 possible sky positions to use as objects from a possible 374. plFiberPlate : 18 possible sky positions to use as objects from a possible 373. plFiberPlate : 11 possible sky positions to use as objects from a possible 372. plFiberPlate : 11 possible sky positions to use as objects from a possible 371. plFiberPlate : 2 possible sky positions to use as objects from a possible 370. plFiberPlate : 9 possible sky positions to use as objects from a possible 369. plFiberPlate : 3 possible sky positions to use as objects from a possible 368. plFiberPlate : 5 possible sky positions to use as objects from a possible 367. plFiberPlate : 50 possible sky positions to use as objects from a possible 366. plFiberPlate : 25 possible sky positions to use as objects from a possible 365. plFiberPlate : 25 possible sky positions to use as objects from a possible 364. plFiberPlate : 14 possible sky positions to use as objects from a possible 363. plFiberPlate : 4 possible sky positions to use as objects from a possible 362. plFiberPlate : 2 possible sky positions to use as objects from a possible 361. plFiberPlate : 2 possible sky positions to use as objects from a possible 360. plFiberPlate : 4 possible sky positions to use as objects from a possible 359. plFiberPlate : 7 possible sky positions to use as objects from a possible 358. plFiberPlate : 40 possible sky positions to use as objects from a possible 357. plFiberPlate : 35 possible sky positions to use as objects from a possible 356. plFiberPlate : 24 possible sky positions to use as objects from a possible 355. plFiberPlate : 13 possible sky positions to use as objects from a possible 354. plFiberPlate : 4 possible sky positions to use as objects from a possible 353. plFiberPlate : 5 possible sky positions to use as objects from a possible 352. plFiberPlate : 10 possible sky positions to use as objects from a possible 351. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0977.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0978.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0978.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0979.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 19 2 9 24 3 6 13 4 6 13 5 22 65 6 16 65 7 20 62 8 12 40 9 20 71 10 20 53 11 8 32 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 153 145 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 156 142 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 160 60 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 164 85 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 152 170 plFiberPlate : adding spectro-photo std with objId = 2248 0 4 259 101 plFiberPlate : adding spectro-photo std with objId = 2328 0 3 164 124 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 167 27 plFiberPlate : 16 possible sky positions to use as objects from a possible 221. plFiberPlate : 13 possible sky positions to use as objects from a possible 220. plFiberPlate : 11 possible sky positions to use as objects from a possible 219. plFiberPlate : 4 possible sky positions to use as objects from a possible 218. plFiberPlate : 7 possible sky positions to use as objects from a possible 217. plFiberPlate : 4 possible sky positions to use as objects from a possible 216. plFiberPlate : 15 possible sky positions to use as objects from a possible 215. plFiberPlate : 19 possible sky positions to use as objects from a possible 214. plFiberPlate : 17 possible sky positions to use as objects from a possible 213. plFiberPlate : 13 possible sky positions to use as objects from a possible 212. plFiberPlate : 10 possible sky positions to use as objects from a possible 211. plFiberPlate : 4 possible sky positions to use as objects from a possible 210. plFiberPlate : 2 possible sky positions to use as objects from a possible 209. plFiberPlate : 2 possible sky positions to use as objects from a possible 208. plFiberPlate : 2 possible sky positions to use as objects from a possible 207. plFiberPlate : 5 possible sky positions to use as objects from a possible 206. plFiberPlate : 26 possible sky positions to use as objects from a possible 205. plFiberPlate : 25 possible sky positions to use as objects from a possible 204. plFiberPlate : 20 possible sky positions to use as objects from a possible 203. plFiberPlate : 12 possible sky positions to use as objects from a possible 202. plFiberPlate : 7 possible sky positions to use as objects from a possible 201. plFiberPlate : 5 possible sky positions to use as objects from a possible 200. plFiberPlate : 2 possible sky positions to use as objects from a possible 199. plFiberPlate : 1 possible sky positions to use as objects from a possible 198. plFiberPlate : 5 possible sky positions to use as objects from a possible 197. plFiberPlate : 34 possible sky positions to use as objects from a possible 196. plFiberPlate : 26 possible sky positions to use as objects from a possible 195. plFiberPlate : 8 possible sky positions to use as objects from a possible 194. plFiberPlate : 9 possible sky positions to use as objects from a possible 193. plFiberPlate : 9 possible sky positions to use as objects from a possible 192. plFiberPlate : 10 possible sky positions to use as objects from a possible 191. plFiberPlate : 14 possible sky positions to use as objects from a possible 190. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0978.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0979.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0979.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.04.2/plPlugMapP-0980.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 46 2 12 28 3 15 41 4 27 59 5 23 96 6 15 73 7 5 28 8 3 23 9 21 65 10 25 79 11 17 58 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 160 103 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 156 142 plFiberPlate : adding spectro-photo std with objId = 2305 0 3 152 27 plFiberPlate : adding spectro-photo std with objId = 2328 0 5 152 170 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 150 57 plFiberPlate : adding spectro-photo std with objId = 2248 0 4 259 101 plFiberPlate : adding spectro-photo std with objId = 2335 0 4 121 129 plFiberPlate : adding spectro-photo std with objId = 2305 0 4 146 140 plFiberPlate : 70 possible sky positions to use as objects from a possible 305. plFiberPlate : 43 possible sky positions to use as objects from a possible 304. plFiberPlate : 26 possible sky positions to use as objects from a possible 303. plFiberPlate : 17 possible sky positions to use as objects from a possible 302. plFiberPlate : 13 possible sky positions to use as objects from a possible 301. plFiberPlate : 6 possible sky positions to use as objects from a possible 300. plFiberPlate : 23 possible sky positions to use as objects from a possible 299. plFiberPlate : 49 possible sky positions to use as objects from a possible 298. plFiberPlate : 42 possible sky positions to use as objects from a possible 297. plFiberPlate : 37 possible sky positions to use as objects from a possible 296. plFiberPlate : 18 possible sky positions to use as objects from a possible 295. plFiberPlate : 10 possible sky positions to use as objects from a possible 294. plFiberPlate : 6 possible sky positions to use as objects from a possible 293. plFiberPlate : 9 possible sky positions to use as objects from a possible 292. plFiberPlate : 14 possible sky positions to use as objects from a possible 291. plFiberPlate : 10 possible sky positions to use as objects from a possible 290. plFiberPlate : 56 possible sky positions to use as objects from a possible 289. plFiberPlate : 32 possible sky positions to use as objects from a possible 288. plFiberPlate : 31 possible sky positions to use as objects from a possible 287. plFiberPlate : 12 possible sky positions to use as objects from a possible 286. plFiberPlate : 12 possible sky positions to use as objects from a possible 285. plFiberPlate : 11 possible sky positions to use as objects from a possible 284. plFiberPlate : 7 possible sky positions to use as objects from a possible 283. plFiberPlate : 9 possible sky positions to use as objects from a possible 282. plFiberPlate : 9 possible sky positions to use as objects from a possible 281. plFiberPlate : 63 possible sky positions to use as objects from a possible 280. plFiberPlate : 43 possible sky positions to use as objects from a possible 279. plFiberPlate : 11 possible sky positions to use as objects from a possible 278. plFiberPlate : 2 possible sky positions to use as objects from a possible 277. plFiberPlate : 5 possible sky positions to use as objects from a possible 276. plFiberPlate : 12 possible sky positions to use as objects from a possible 275. plFiberPlate : 8 possible sky positions to use as objects from a possible 274. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0979.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0980.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.04.2/plOverlay-0980.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Apr 17 17:55:30 CDT 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 9 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0972.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0972.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0972.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0973.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0973.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0973.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0974.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0974.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0974.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0975.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.0751,9.9030) and (-7.09,10.66) plMakeFanucCodes : fixed path between (-4.8324,11.7427) and (-4.31,12.03) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0975.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0975.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0976.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0976.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0976.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0977.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0977.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.2461,-7.5165) and (-11.58,-1.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0977.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0978.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6300,-10.9427) and (-5.91,-11.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0978.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.6876,7.4610) and (12.06,1.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0978.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 18 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0979.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0979.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0979.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0980.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.0551,12.3622) and (-1.53,12.55) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0980.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.04.2/plFanuc-0980.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Apr 17 17:55:58 CDT 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e61368 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 9 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 972 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 973 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 974 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 975 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 976 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 977 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 978 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 979 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 980 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Apr 17 17:56:12 CDT 2002 Begin running plateEnder dr2002.04.2 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_34/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_34/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.04.2 -morePipes 1 failed. PS: Read file for stderr output of this job.