Sender: LSF System Subject: Job 45986: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed May 15 18:14:29 2002 Results reported at Wed May 15 18:19:33 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v13_77 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.05.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 259.94 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed May 15 18:14:34 CDT 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed May 15 18:14:37 CDT 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_18/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v13_77/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_9/OSF1/bin:/sdss/ups/prd/sdssmath/v5_6/OSF1/bin:/sdss/ups/prd/astrotools/v5_8/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Wed May 15 18:14:37 CDT 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_8/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_9/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v13_77/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_18/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_9/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_2/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_6/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a --------------------------------------------------------------- Wed May 15 18:14:37 CDT 2002 Begin running plate --------------------------------------------------------------- Wed May 15 18:14:37 CDT 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_77/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_77/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e78768 makePlates : beginning loop over plObs chain; makePlates : making 17 plates makePlates : making a plate from ./plPlugMapT-9236.par makePlates : plateInfo struct for plate 1021 : (h2).mjd 52435 (h2).raCen 310.1132 (h2).decCen 0.006811826 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 310.113 0.007 310.113 1.507 plMakePlateFromTile : mjd of obs : 52435.778809 Observed HA/dec of plate center, fiducial point (deg) : -25.002 0.025 -25.002 1.524 The rotation angle of the fid. point is 33.290618 plMakePlateFromTile : beginning loop over 917 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9237.par makePlates : plateInfo struct for plate 1022 : (h2).mjd 52435 (h2).raCen 311.8013 (h2).decCen 0.005181892 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 311.801 0.005 311.801 1.505 plMakePlateFromTile : mjd of obs : 52435.780714 Observed HA/dec of plate center, fiducial point (deg) : -26.002 0.024 -26.002 1.523 The rotation angle of the fid. point is 34.258996 plMakePlateFromTile : beginning loop over 1059 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9238.par makePlates : plateInfo struct for plate 1023 : (h2).mjd 52435 (h2).raCen 313.4135 (h2).decCen 0.03045941 (h2).haCen -28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 313.413 0.030 313.413 1.530 plMakePlateFromTile : mjd of obs : 52435.779637 Observed HA/dec of plate center, fiducial point (deg) : -28.002 0.049 -28.002 1.549 The rotation angle of the fid. point is 36.125219 plMakePlateFromTile : beginning loop over 1144 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9239.par makePlates : plateInfo struct for plate 1024 : (h2).mjd 52435 (h2).raCen 314.931 (h2).decCen -0.006412425 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 314.931 -0.006 314.931 1.494 plMakePlateFromTile : mjd of obs : 52435.781070 Observed HA/dec of plate center, fiducial point (deg) : -29.002 0.013 -29.002 1.512 The rotation angle of the fid. point is 36.982833 plMakePlateFromTile : beginning loop over 1206 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9240.par makePlates : plateInfo struct for plate 1025 : (h2).mjd 52435 (h2).raCen 316.7707 (h2).decCen -0.07187875 (h2).haCen -31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 316.771 -0.072 316.771 1.428 plMakePlateFromTile : mjd of obs : 52435.780623 Observed HA/dec of plate center, fiducial point (deg) : -31.002 -0.052 -31.002 1.447 The rotation angle of the fid. point is 38.619726 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9241.par makePlates : plateInfo struct for plate 1026 : (h2).mjd 52435 (h2).raCen 318.6458 (h2).decCen 0.008482357 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 318.646 0.008 318.646 1.508 plMakePlateFromTile : mjd of obs : 52435.821842 Observed HA/dec of plate center, fiducial point (deg) : -18.002 0.027 -18.002 1.527 The rotation angle of the fid. point is 25.649122 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9242.par makePlates : plateInfo struct for plate 1027 : (h2).mjd 52435 (h2).raCen 320.5509 (h2).decCen -0.01558691 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 320.551 -0.016 320.551 1.484 plMakePlateFromTile : mjd of obs : 52435.821577 Observed HA/dec of plate center, fiducial point (deg) : -20.002 0.004 -20.002 1.503 The rotation angle of the fid. point is 27.974899 plMakePlateFromTile : beginning loop over 1258 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9243.par makePlates : plateInfo struct for plate 1028 : (h2).mjd 52435 (h2).raCen 322.4027 (h2).decCen 0.105343 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 322.403 0.105 322.403 1.605 plMakePlateFromTile : mjd of obs : 52435.821164 Observed HA/dec of plate center, fiducial point (deg) : -22.002 0.125 -22.002 1.624 The rotation angle of the fid. point is 30.265579 plMakePlateFromTile : beginning loop over 1240 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9244.par makePlates : plateInfo struct for plate 1029 : (h2).mjd 52435 (h2).raCen 324.02 (h2).decCen -0.025976 (h2).haCen -24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 324.020 -0.026 324.020 1.474 plMakePlateFromTile : mjd of obs : 52435.820101 Observed HA/dec of plate center, fiducial point (deg) : -24.002 -0.006 -24.002 1.493 The rotation angle of the fid. point is 32.273659 plMakePlateFromTile : beginning loop over 1288 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9245.par makePlates : plateInfo struct for plate 1030 : (h2).mjd 52435 (h2).raCen 325.8144 (h2).decCen -0.04689807 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 325.814 -0.047 325.814 1.453 plMakePlateFromTile : mjd of obs : 52435.822301 Observed HA/dec of plate center, fiducial point (deg) : -25.002 -0.026 -25.002 1.473 The rotation angle of the fid. point is 33.259689 plMakePlateFromTile : beginning loop over 1326 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9246.par makePlates : plateInfo struct for plate 1031 : (h2).mjd 52435 (h2).raCen 327.9088 (h2).decCen -0.001687655 (h2).haCen -27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 327.909 -0.002 327.909 1.498 plMakePlateFromTile : mjd of obs : 52435.822560 Observed HA/dec of plate center, fiducial point (deg) : -27.002 0.019 -27.002 1.518 The rotation angle of the fid. point is 35.197658 plMakePlateFromTile : beginning loop over 1299 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9247.par makePlates : plateInfo struct for plate 1032 : (h2).mjd 52435 (h2).raCen 329.7463 (h2).decCen -0.04405917 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 329.746 -0.044 329.746 1.456 plMakePlateFromTile : mjd of obs : 52435.822107 Observed HA/dec of plate center, fiducial point (deg) : -29.002 -0.023 -29.002 1.476 The rotation angle of the fid. point is 36.961855 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9248.par makePlates : plateInfo struct for plate 1033 : (h2).mjd 52435 (h2).raCen 331.7918 (h2).decCen -0.002810331 (h2).haCen -31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 331.792 -0.003 331.792 1.497 plMakePlateFromTile : mjd of obs : 52435.822231 Observed HA/dec of plate center, fiducial point (deg) : -31.002 0.019 -31.002 1.518 The rotation angle of the fid. point is 38.668096 plMakePlateFromTile : beginning loop over 1381 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-3.00, 124.64, 8.4) and (-3.00, 124.66, 8.0) checkLTHo : distance = 0.016, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-3.00, 124.64, 8.4) makePlates : making a plate from ./plPlugMapT-9249.par makePlates : plateInfo struct for plate 1034 : (h2).mjd 52435 (h2).raCen 333.6772 (h2).decCen -0.01926675 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 333.677 -0.019 333.677 1.481 plMakePlateFromTile : mjd of obs : 52435.863478 Observed HA/dec of plate center, fiducial point (deg) : -18.002 0.001 -18.002 1.501 The rotation angle of the fid. point is 25.636630 plMakePlateFromTile : beginning loop over 1352 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9250.par makePlates : plateInfo struct for plate 1035 : (h2).mjd 52435 (h2).raCen 335.6154 (h2).decCen -0.01811701 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 335.615 -0.018 335.615 1.482 plMakePlateFromTile : mjd of obs : 52435.863304 Observed HA/dec of plate center, fiducial point (deg) : -20.002 0.003 -20.002 1.502 The rotation angle of the fid. point is 27.976929 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9251.par makePlates : plateInfo struct for plate 1036 : (h2).mjd 52435 (h2).raCen 337.5379 (h2).decCen -0.03851777 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 337.538 -0.039 337.538 1.461 plMakePlateFromTile : mjd of obs : 52435.863087 Observed HA/dec of plate center, fiducial point (deg) : -22.002 -0.017 -22.002 1.482 The rotation angle of the fid. point is 30.179005 plMakePlateFromTile : beginning loop over 1368 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9252.par makePlates : plateInfo struct for plate 1037 : (h2).mjd 52435 (h2).raCen 339.4729 (h2).decCen -0.01993779 (h2).haCen -24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 339.473 -0.020 339.473 1.480 plMakePlateFromTile : mjd of obs : 52435.862905 Observed HA/dec of plate center, fiducial point (deg) : -24.002 0.002 -24.002 1.501 The rotation angle of the fid. point is 32.281231 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed May 15 18:15:36 CDT 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_77/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_77/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 17 plates fiberPlates : fibering plate ./plPlugMapP-1021.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 63 to list of science objects plFiberPlate : adding sky number 21 to list of science objects plFiberPlate : adding sky number 37 to list of science objects plFiberPlate : adding sky number 64 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 20 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 26 to list of science objects plFiberPlate : adding sky number 56 to list of science objects plFiberPlate : adding sky number 14 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 30 to list of science objects plFiberPlate : adding sky number 40 to list of science objects plFiberPlate : adding sky number 107 to list of science objects plFiberPlate : adding sky number 57 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 44 2 19 22 3 14 13 4 13 7 5 2 6 6 5 12 7 10 20 8 6 34 9 6 20 10 32 27 11 25 30 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 60 209 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 50 249 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 50 376 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 56 91 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 43 290 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 56 125 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 43 31 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 54 24 plFiberPlate : 14 possible sky positions to use as objects from a possible 107. plFiberPlate : 10 possible sky positions to use as objects from a possible 106. plFiberPlate : 7 possible sky positions to use as objects from a possible 105. plFiberPlate : 6 possible sky positions to use as objects from a possible 104. plFiberPlate : 5 possible sky positions to use as objects from a possible 103. plFiberPlate : 10 possible sky positions to use as objects from a possible 102. plFiberPlate : 19 possible sky positions to use as objects from a possible 101. plFiberPlate : 5 possible sky positions to use as objects from a possible 100. plFiberPlate : 3 possible sky positions to use as objects from a possible 99. plFiberPlate : 1 possible sky positions to use as objects from a possible 98. plFiberPlate : 0 possible sky positions to use as objects from a possible 97. plFiberPlate: No sky found for bundle at -71.825 -63.965, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 97. plFiberPlate: No sky found for bundle at -71.825 -63.965, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 97. plFiberPlate: No sky found for bundle at -71.825 -63.965, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 97. plFiberPlate : 0 possible sky positions to use as objects from a possible 96. plFiberPlate: No sky found for bundle at -30.288 -62.775, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 96. plFiberPlate: No sky found for bundle at -30.288 -62.775, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 96. plFiberPlate: No sky found for bundle at -30.288 -62.775, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 96. plFiberPlate: No sky found for bundle at -30.288 -62.775, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 96. plFiberPlate: No sky found for bundle at -30.288 -62.775, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 96. plFiberPlate: No sky found for bundle at -30.288 -62.775, increase box by 60 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 96. plFiberPlate : 0 possible sky positions to use as objects from a possible 95. plFiberPlate: No sky found for bundle at 16.215 -45.041, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 95. plFiberPlate: No sky found for bundle at 16.215 -45.041, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 95. plFiberPlate: No sky found for bundle at 16.215 -45.041, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 95. plFiberPlate: No sky found for bundle at 16.215 -45.041, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 95. plFiberPlate: No sky found for bundle at 16.215 -45.041, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 95. plFiberPlate: No sky found for bundle at 16.215 -45.041, increase box by 60 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 95. plFiberPlate : 4 possible sky positions to use as objects from a possible 94. plFiberPlate : 17 possible sky positions to use as objects from a possible 93. plFiberPlate : 9 possible sky positions to use as objects from a possible 92. plFiberPlate : 5 possible sky positions to use as objects from a possible 91. plFiberPlate : 3 possible sky positions to use as objects from a possible 90. plFiberPlate : 2 possible sky positions to use as objects from a possible 89. plFiberPlate : 1 possible sky positions to use as objects from a possible 88. plFiberPlate : 0 possible sky positions to use as objects from a possible 87. plFiberPlate: No sky found for bundle at -27.084 115.033, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 87. plFiberPlate : 5 possible sky positions to use as objects from a possible 86. plFiberPlate : 5 possible sky positions to use as objects from a possible 85. plFiberPlate : 1 possible sky positions to use as objects from a possible 84. plFiberPlate : 4 possible sky positions to use as objects from a possible 83. plFiberPlate : 5 possible sky positions to use as objects from a possible 82. plFiberPlate : 4 possible sky positions to use as objects from a possible 81. plFiberPlate : 3 possible sky positions to use as objects from a possible 80. plFiberPlate : 2 possible sky positions to use as objects from a possible 79. plFiberPlate : 1 possible sky positions to use as objects from a possible 78. plFiberPlate : 0 possible sky positions to use as objects from a possible 77. plFiberPlate: No sky found for bundle at 87.461 225.377, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 77. plFiberPlate: No sky found for bundle at 87.461 225.377, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 77. plFiberPlate: No sky found for bundle at 87.461 225.377, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 77. plFiberPlate: No sky found for bundle at 87.461 225.377, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 77. plFiberPlate: No sky found for bundle at 87.461 225.377, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 77. plFiberPlate : 7 possible sky positions to use as objects from a possible 76. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open ./plOverlay-1021.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1021.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1022.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 127 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 152 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 120 to list of science objects plFiberPlate : adding sky number 60 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 173 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 75 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 145 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 39 2 22 25 3 21 22 4 21 38 5 9 37 6 9 25 7 10 30 8 5 41 9 5 37 10 40 48 11 28 34 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 72 187 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 69 311 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 61 343 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 72 72 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 56 125 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 80 101 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 54 24 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 62 193 plFiberPlate : 42 possible sky positions to use as objects from a possible 182. plFiberPlate : 20 possible sky positions to use as objects from a possible 181. plFiberPlate : 14 possible sky positions to use as objects from a possible 180. plFiberPlate : 7 possible sky positions to use as objects from a possible 179. plFiberPlate : 13 possible sky positions to use as objects from a possible 178. plFiberPlate : 6 possible sky positions to use as objects from a possible 177. plFiberPlate : 11 possible sky positions to use as objects from a possible 176. plFiberPlate : 29 possible sky positions to use as objects from a possible 175. plFiberPlate : 22 possible sky positions to use as objects from a possible 174. plFiberPlate : 11 possible sky positions to use as objects from a possible 173. plFiberPlate : 3 possible sky positions to use as objects from a possible 172. plFiberPlate : 5 possible sky positions to use as objects from a possible 171. plFiberPlate : 3 possible sky positions to use as objects from a possible 170. plFiberPlate : 4 possible sky positions to use as objects from a possible 169. plFiberPlate : 5 possible sky positions to use as objects from a possible 168. plFiberPlate : 5 possible sky positions to use as objects from a possible 167. plFiberPlate : 19 possible sky positions to use as objects from a possible 166. plFiberPlate : 11 possible sky positions to use as objects from a possible 165. plFiberPlate : 5 possible sky positions to use as objects from a possible 164. plFiberPlate : 0 possible sky positions to use as objects from a possible 163. plFiberPlate: No sky found for bundle at -3.297 78.290, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 163. plFiberPlate : 4 possible sky positions to use as objects from a possible 162. plFiberPlate : 4 possible sky positions to use as objects from a possible 161. plFiberPlate : 7 possible sky positions to use as objects from a possible 160. plFiberPlate : 3 possible sky positions to use as objects from a possible 159. plFiberPlate : 5 possible sky positions to use as objects from a possible 158. plFiberPlate : 14 possible sky positions to use as objects from a possible 157. plFiberPlate : 13 possible sky positions to use as objects from a possible 156. plFiberPlate : 9 possible sky positions to use as objects from a possible 155. plFiberPlate : 8 possible sky positions to use as objects from a possible 154. plFiberPlate : 0 possible sky positions to use as objects from a possible 153. plFiberPlate: No sky found for bundle at 64.739 216.792, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 153. plFiberPlate: No sky found for bundle at 64.739 216.792, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 153. plFiberPlate : 6 possible sky positions to use as objects from a possible 152. plFiberPlate : 10 possible sky positions to use as objects from a possible 151. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1021.ps/CPS Open ./plOverlay-1022.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1022.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1023.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 233 to list of science objects plFiberPlate : adding sky number 180 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : adding sky number 103 to list of science objects plFiberPlate : adding sky number 93 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 216 to list of science objects plFiberPlate : adding sky number 108 to list of science objects plFiberPlate : adding sky number 120 to list of science objects plFiberPlate : adding sky number 253 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 54 to list of science objects plFiberPlate : adding sky number 245 to list of science objects plFiberPlate : adding sky number 188 to list of science objects plFiberPlate : adding sky number 103 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 61 2 23 36 3 14 32 4 19 39 5 6 47 6 9 35 7 6 28 8 3 58 9 5 49 10 24 64 11 23 49 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 75 253 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 68 145 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 80 150 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 77 91 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 80 101 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 81 290 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 62 193 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 46 possible sky positions to use as objects from a possible 253. plFiberPlate : 32 possible sky positions to use as objects from a possible 252. plFiberPlate : 20 possible sky positions to use as objects from a possible 251. plFiberPlate : 6 possible sky positions to use as objects from a possible 250. plFiberPlate : 8 possible sky positions to use as objects from a possible 249. plFiberPlate : 16 possible sky positions to use as objects from a possible 248. plFiberPlate : 30 possible sky positions to use as objects from a possible 247. plFiberPlate : 36 possible sky positions to use as objects from a possible 246. plFiberPlate : 27 possible sky positions to use as objects from a possible 245. plFiberPlate : 18 possible sky positions to use as objects from a possible 244. plFiberPlate : 7 possible sky positions to use as objects from a possible 243. plFiberPlate : 3 possible sky positions to use as objects from a possible 242. plFiberPlate : 7 possible sky positions to use as objects from a possible 241. plFiberPlate : 10 possible sky positions to use as objects from a possible 240. plFiberPlate : 16 possible sky positions to use as objects from a possible 239. plFiberPlate : 10 possible sky positions to use as objects from a possible 238. plFiberPlate : 31 possible sky positions to use as objects from a possible 237. plFiberPlate : 18 possible sky positions to use as objects from a possible 236. plFiberPlate : 11 possible sky positions to use as objects from a possible 235. plFiberPlate : 5 possible sky positions to use as objects from a possible 234. plFiberPlate : 2 possible sky positions to use as objects from a possible 233. plFiberPlate : 10 possible sky positions to use as objects from a possible 232. plFiberPlate : 14 possible sky positions to use as objects from a possible 231. plFiberPlate : 7 possible sky positions to use as objects from a possible 230. plFiberPlate : 8 possible sky positions to use as objects from a possible 229. plFiberPlate : 22 possible sky positions to use as objects from a possible 228. plFiberPlate : 14 possible sky positions to use as objects from a possible 227. plFiberPlate : 8 possible sky positions to use as objects from a possible 226. plFiberPlate : 1 possible sky positions to use as objects from a possible 225. plFiberPlate : 3 possible sky positions to use as objects from a possible 224. plFiberPlate : 2 possible sky positions to use as objects from a possible 223. plFiberPlate : 13 possible sky positions to use as objects from a possible 222. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1022.ps/CPS Open ./plOverlay-1023.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1023.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1024.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 251 to list of science objects plFiberPlate : adding sky number 244 to list of science objects plFiberPlate : adding sky number 307 to list of science objects plFiberPlate : adding sky number 8 to list of science objects plFiberPlate : adding sky number 101 to list of science objects plFiberPlate : adding sky number 240 to list of science objects plFiberPlate : adding sky number 77 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 300 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 18 to list of science objects plFiberPlate : adding sky number 137 to list of science objects plFiberPlate : adding sky number 283 to list of science objects plFiberPlate : adding sky number 176 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 85 2 16 53 3 25 51 4 25 53 5 7 56 6 12 30 7 11 33 8 7 57 9 7 38 10 34 91 11 22 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 97 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 82 141 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 97 164 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 100 81 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 82 203 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 101 137 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 83 214 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 71 possible sky positions to use as objects from a possible 307. plFiberPlate : 49 possible sky positions to use as objects from a possible 306. plFiberPlate : 21 possible sky positions to use as objects from a possible 305. plFiberPlate : 15 possible sky positions to use as objects from a possible 304. plFiberPlate : 28 possible sky positions to use as objects from a possible 303. plFiberPlate : 12 possible sky positions to use as objects from a possible 302. plFiberPlate : 24 possible sky positions to use as objects from a possible 301. plFiberPlate : 31 possible sky positions to use as objects from a possible 300. plFiberPlate : 30 possible sky positions to use as objects from a possible 299. plFiberPlate : 15 possible sky positions to use as objects from a possible 298. plFiberPlate : 6 possible sky positions to use as objects from a possible 297. plFiberPlate : 9 possible sky positions to use as objects from a possible 296. plFiberPlate : 7 possible sky positions to use as objects from a possible 295. plFiberPlate : 22 possible sky positions to use as objects from a possible 294. plFiberPlate : 8 possible sky positions to use as objects from a possible 293. plFiberPlate : 12 possible sky positions to use as objects from a possible 292. plFiberPlate : 32 possible sky positions to use as objects from a possible 291. plFiberPlate : 24 possible sky positions to use as objects from a possible 290. plFiberPlate : 15 possible sky positions to use as objects from a possible 289. plFiberPlate : 8 possible sky positions to use as objects from a possible 288. plFiberPlate : 6 possible sky positions to use as objects from a possible 287. plFiberPlate : 1 possible sky positions to use as objects from a possible 286. plFiberPlate : 3 possible sky positions to use as objects from a possible 285. plFiberPlate : 13 possible sky positions to use as objects from a possible 284. plFiberPlate : 16 possible sky positions to use as objects from a possible 283. plFiberPlate : 12 possible sky positions to use as objects from a possible 282. plFiberPlate : 7 possible sky positions to use as objects from a possible 281. plFiberPlate : 2 possible sky positions to use as objects from a possible 280. plFiberPlate : 2 possible sky positions to use as objects from a possible 279. plFiberPlate : 6 possible sky positions to use as objects from a possible 278. plFiberPlate : 4 possible sky positions to use as objects from a possible 277. plFiberPlate : 7 possible sky positions to use as objects from a possible 276. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1023.ps/CPS Open ./plOverlay-1024.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1024.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1025.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 214 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 177 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 323 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 140 to list of science objects plFiberPlate : adding sky number 15 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 190 to list of science objects plFiberPlate : adding sky number 252 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 79 2 19 52 3 11 50 4 18 82 5 4 72 6 9 52 7 6 49 8 2 66 9 7 72 10 25 96 11 23 67 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 98 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 87 89 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 96 171 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 109 8 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 101 137 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 108 6 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : 85 possible sky positions to use as objects from a possible 360. plFiberPlate : 50 possible sky positions to use as objects from a possible 359. plFiberPlate : 24 possible sky positions to use as objects from a possible 358. plFiberPlate : 14 possible sky positions to use as objects from a possible 357. plFiberPlate : 14 possible sky positions to use as objects from a possible 356. plFiberPlate : 19 possible sky positions to use as objects from a possible 355. plFiberPlate : 37 possible sky positions to use as objects from a possible 354. plFiberPlate : 64 possible sky positions to use as objects from a possible 353. plFiberPlate : 45 possible sky positions to use as objects from a possible 352. plFiberPlate : 31 possible sky positions to use as objects from a possible 351. plFiberPlate : 12 possible sky positions to use as objects from a possible 350. plFiberPlate : 10 possible sky positions to use as objects from a possible 349. plFiberPlate : 9 possible sky positions to use as objects from a possible 348. plFiberPlate : 6 possible sky positions to use as objects from a possible 347. plFiberPlate : 13 possible sky positions to use as objects from a possible 346. plFiberPlate : 14 possible sky positions to use as objects from a possible 345. plFiberPlate : 50 possible sky positions to use as objects from a possible 344. plFiberPlate : 39 possible sky positions to use as objects from a possible 343. plFiberPlate : 26 possible sky positions to use as objects from a possible 342. plFiberPlate : 14 possible sky positions to use as objects from a possible 341. plFiberPlate : 7 possible sky positions to use as objects from a possible 340. plFiberPlate : 6 possible sky positions to use as objects from a possible 339. plFiberPlate : 8 possible sky positions to use as objects from a possible 338. plFiberPlate : 13 possible sky positions to use as objects from a possible 337. plFiberPlate : 18 possible sky positions to use as objects from a possible 336. plFiberPlate : 14 possible sky positions to use as objects from a possible 335. plFiberPlate : 15 possible sky positions to use as objects from a possible 334. plFiberPlate : 10 possible sky positions to use as objects from a possible 333. plFiberPlate : 8 possible sky positions to use as objects from a possible 332. plFiberPlate : 7 possible sky positions to use as objects from a possible 331. plFiberPlate : 5 possible sky positions to use as objects from a possible 330. plFiberPlate : 4 possible sky positions to use as objects from a possible 329. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1024.ps/CPS Open ./plOverlay-1025.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1025.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1026.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 299 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 114 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 338 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 246 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 254 to list of science objects plFiberPlate : adding sky number 275 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 87 to list of science objects plFiberPlate : adding sky number 312 to list of science objects plFiberPlate : adding sky number 359 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 83 2 20 49 3 18 51 4 21 73 5 3 64 6 5 50 7 5 48 8 3 72 9 5 69 10 31 92 11 32 72 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 114 188 plFiberPlate : adding spectro-photo std with objId = 2659 0 6 112 30 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 96 171 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 108 116 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 108 6 plFiberPlate : 91 possible sky positions to use as objects from a possible 371. plFiberPlate : 36 possible sky positions to use as objects from a possible 370. plFiberPlate : 17 possible sky positions to use as objects from a possible 369. plFiberPlate : 13 possible sky positions to use as objects from a possible 368. plFiberPlate : 20 possible sky positions to use as objects from a possible 367. plFiberPlate : 9 possible sky positions to use as objects from a possible 366. plFiberPlate : 38 possible sky positions to use as objects from a possible 365. plFiberPlate : 66 possible sky positions to use as objects from a possible 364. plFiberPlate : 43 possible sky positions to use as objects from a possible 363. plFiberPlate : 27 possible sky positions to use as objects from a possible 362. plFiberPlate : 13 possible sky positions to use as objects from a possible 361. plFiberPlate : 6 possible sky positions to use as objects from a possible 360. plFiberPlate : 10 possible sky positions to use as objects from a possible 359. plFiberPlate : 4 possible sky positions to use as objects from a possible 358. plFiberPlate : 22 possible sky positions to use as objects from a possible 357. plFiberPlate : 19 possible sky positions to use as objects from a possible 356. plFiberPlate : 37 possible sky positions to use as objects from a possible 355. plFiberPlate : 23 possible sky positions to use as objects from a possible 354. plFiberPlate : 17 possible sky positions to use as objects from a possible 353. plFiberPlate : 10 possible sky positions to use as objects from a possible 352. plFiberPlate : 6 possible sky positions to use as objects from a possible 351. plFiberPlate : 9 possible sky positions to use as objects from a possible 350. plFiberPlate : 21 possible sky positions to use as objects from a possible 349. plFiberPlate : 10 possible sky positions to use as objects from a possible 348. plFiberPlate : 12 possible sky positions to use as objects from a possible 347. plFiberPlate : 24 possible sky positions to use as objects from a possible 346. plFiberPlate : 16 possible sky positions to use as objects from a possible 345. plFiberPlate : 9 possible sky positions to use as objects from a possible 344. plFiberPlate : 9 possible sky positions to use as objects from a possible 343. plFiberPlate : 4 possible sky positions to use as objects from a possible 342. plFiberPlate : 8 possible sky positions to use as objects from a possible 341. plFiberPlate : 7 possible sky positions to use as objects from a possible 340. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1025.ps/CPS Open ./plOverlay-1026.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1026.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1027.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 334 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 288 to list of science objects plFiberPlate : adding sky number 345 to list of science objects plFiberPlate : adding sky number 67 to list of science objects plFiberPlate : adding sky number 118 to list of science objects plFiberPlate : adding sky number 57 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 316 to list of science objects plFiberPlate : adding sky number 87 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 123 to list of science objects plFiberPlate : adding sky number 335 to list of science objects plFiberPlate : adding sky number 91 to list of science objects plFiberPlate : adding sky number 234 to list of science objects plFiberPlate : adding sky number 296 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 97 2 24 54 3 20 52 4 27 79 5 4 91 6 6 47 7 8 37 8 6 80 9 7 70 10 41 114 11 30 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 19 28 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 23 149 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 113 161 plFiberPlate : adding spectro-photo std with objId = 2659 0 5 128 35 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 112 122 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 114 239 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 25 8 plFiberPlate : 101 possible sky positions to use as objects from a possible 414. plFiberPlate : 54 possible sky positions to use as objects from a possible 413. plFiberPlate : 27 possible sky positions to use as objects from a possible 412. plFiberPlate : 25 possible sky positions to use as objects from a possible 411. plFiberPlate : 15 possible sky positions to use as objects from a possible 410. plFiberPlate : 19 possible sky positions to use as objects from a possible 409. plFiberPlate : 42 possible sky positions to use as objects from a possible 408. plFiberPlate : 69 possible sky positions to use as objects from a possible 407. plFiberPlate : 68 possible sky positions to use as objects from a possible 406. plFiberPlate : 41 possible sky positions to use as objects from a possible 405. plFiberPlate : 19 possible sky positions to use as objects from a possible 404. plFiberPlate : 5 possible sky positions to use as objects from a possible 403. plFiberPlate : 11 possible sky positions to use as objects from a possible 402. plFiberPlate : 18 possible sky positions to use as objects from a possible 401. plFiberPlate : 20 possible sky positions to use as objects from a possible 400. plFiberPlate : 22 possible sky positions to use as objects from a possible 399. plFiberPlate : 40 possible sky positions to use as objects from a possible 398. plFiberPlate : 26 possible sky positions to use as objects from a possible 397. plFiberPlate : 18 possible sky positions to use as objects from a possible 396. plFiberPlate : 10 possible sky positions to use as objects from a possible 395. plFiberPlate : 1 possible sky positions to use as objects from a possible 394. plFiberPlate : 7 possible sky positions to use as objects from a possible 393. plFiberPlate : 11 possible sky positions to use as objects from a possible 392. plFiberPlate : 12 possible sky positions to use as objects from a possible 391. plFiberPlate : 18 possible sky positions to use as objects from a possible 390. plFiberPlate : 20 possible sky positions to use as objects from a possible 389. plFiberPlate : 13 possible sky positions to use as objects from a possible 388. plFiberPlate : 3 possible sky positions to use as objects from a possible 387. plFiberPlate : 4 possible sky positions to use as objects from a possible 386. plFiberPlate : 0 possible sky positions to use as objects from a possible 385. plFiberPlate: No sky found for bundle at 92.531 227.056, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 385. plFiberPlate : 6 possible sky positions to use as objects from a possible 384. plFiberPlate : 3 possible sky positions to use as objects from a possible 383. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1026.ps/CPS Open ./plOverlay-1027.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1027.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1028.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 420 to list of science objects plFiberPlate : adding sky number 106 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 318 to list of science objects plFiberPlate : adding sky number 362 to list of science objects plFiberPlate : adding sky number 375 to list of science objects plFiberPlate : adding sky number 409 to list of science objects plFiberPlate : adding sky number 165 to list of science objects plFiberPlate : adding sky number 180 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 407 to list of science objects plFiberPlate : adding sky number 268 to list of science objects plFiberPlate : adding sky number 248 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 96 2 19 73 3 15 78 4 21 86 5 11 87 6 12 39 7 8 44 8 8 71 9 7 69 10 26 109 11 21 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 137 177 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 130 157 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 26 134 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 25 8 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 127 55 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 132 61 plFiberPlate : 94 possible sky positions to use as objects from a possible 410. plFiberPlate : 61 possible sky positions to use as objects from a possible 409. plFiberPlate : 30 possible sky positions to use as objects from a possible 408. plFiberPlate : 15 possible sky positions to use as objects from a possible 407. plFiberPlate : 13 possible sky positions to use as objects from a possible 406. plFiberPlate : 23 possible sky positions to use as objects from a possible 405. plFiberPlate : 49 possible sky positions to use as objects from a possible 404. plFiberPlate : 63 possible sky positions to use as objects from a possible 403. plFiberPlate : 35 possible sky positions to use as objects from a possible 402. plFiberPlate : 9 possible sky positions to use as objects from a possible 401. plFiberPlate : 4 possible sky positions to use as objects from a possible 400. plFiberPlate : 2 possible sky positions to use as objects from a possible 399. plFiberPlate : 4 possible sky positions to use as objects from a possible 398. plFiberPlate : 15 possible sky positions to use as objects from a possible 397. plFiberPlate : 21 possible sky positions to use as objects from a possible 396. plFiberPlate : 12 possible sky positions to use as objects from a possible 395. plFiberPlate : 65 possible sky positions to use as objects from a possible 394. plFiberPlate : 36 possible sky positions to use as objects from a possible 393. plFiberPlate : 14 possible sky positions to use as objects from a possible 392. plFiberPlate : 10 possible sky positions to use as objects from a possible 391. plFiberPlate : 4 possible sky positions to use as objects from a possible 390. plFiberPlate : 11 possible sky positions to use as objects from a possible 389. plFiberPlate : 7 possible sky positions to use as objects from a possible 388. plFiberPlate : 9 possible sky positions to use as objects from a possible 387. plFiberPlate : 8 possible sky positions to use as objects from a possible 386. plFiberPlate : 23 possible sky positions to use as objects from a possible 385. plFiberPlate : 21 possible sky positions to use as objects from a possible 384. plFiberPlate : 14 possible sky positions to use as objects from a possible 383. plFiberPlate : 6 possible sky positions to use as objects from a possible 382. plFiberPlate : 5 possible sky positions to use as objects from a possible 381. plFiberPlate : 13 possible sky positions to use as objects from a possible 380. plFiberPlate : 13 possible sky positions to use as objects from a possible 379. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1027.ps/CPS Open ./plOverlay-1028.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1028.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1029.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 210 to list of science objects plFiberPlate : adding sky number 364 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 431 to list of science objects plFiberPlate : adding sky number 279 to list of science objects plFiberPlate : adding sky number 449 to list of science objects plFiberPlate : adding sky number 216 to list of science objects plFiberPlate : adding sky number 362 to list of science objects plFiberPlate : adding sky number 336 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 236 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 103 2 18 71 3 15 63 4 23 86 5 12 93 6 10 59 7 9 56 8 6 90 9 7 67 10 26 116 11 18 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 137 177 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 45 94 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 45 102 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 148 76 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 149 108 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 132 61 plFiberPlate : 84 possible sky positions to use as objects from a possible 448. plFiberPlate : 48 possible sky positions to use as objects from a possible 447. plFiberPlate : 24 possible sky positions to use as objects from a possible 446. plFiberPlate : 31 possible sky positions to use as objects from a possible 445. plFiberPlate : 18 possible sky positions to use as objects from a possible 444. plFiberPlate : 30 possible sky positions to use as objects from a possible 443. plFiberPlate : 30 possible sky positions to use as objects from a possible 442. plFiberPlate : 61 possible sky positions to use as objects from a possible 441. plFiberPlate : 55 possible sky positions to use as objects from a possible 440. plFiberPlate : 41 possible sky positions to use as objects from a possible 439. plFiberPlate : 23 possible sky positions to use as objects from a possible 438. plFiberPlate : 4 possible sky positions to use as objects from a possible 437. plFiberPlate : 12 possible sky positions to use as objects from a possible 436. plFiberPlate : 11 possible sky positions to use as objects from a possible 435. plFiberPlate : 21 possible sky positions to use as objects from a possible 434. plFiberPlate : 30 possible sky positions to use as objects from a possible 433. plFiberPlate : 32 possible sky positions to use as objects from a possible 432. plFiberPlate : 25 possible sky positions to use as objects from a possible 431. plFiberPlate : 9 possible sky positions to use as objects from a possible 430. plFiberPlate : 4 possible sky positions to use as objects from a possible 429. plFiberPlate : 7 possible sky positions to use as objects from a possible 428. plFiberPlate : 4 possible sky positions to use as objects from a possible 427. plFiberPlate : 6 possible sky positions to use as objects from a possible 426. plFiberPlate : 11 possible sky positions to use as objects from a possible 425. plFiberPlate : 17 possible sky positions to use as objects from a possible 424. plFiberPlate : 35 possible sky positions to use as objects from a possible 423. plFiberPlate : 15 possible sky positions to use as objects from a possible 422. plFiberPlate : 9 possible sky positions to use as objects from a possible 421. plFiberPlate : 5 possible sky positions to use as objects from a possible 420. plFiberPlate : 13 possible sky positions to use as objects from a possible 419. plFiberPlate : 2 possible sky positions to use as objects from a possible 418. plFiberPlate : 22 possible sky positions to use as objects from a possible 417. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1028.ps/CPS Open ./plOverlay-1029.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1029.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1030.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 298 to list of science objects plFiberPlate : adding sky number 173 to list of science objects plFiberPlate : adding sky number 71 to list of science objects plFiberPlate : adding sky number 388 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 221 to list of science objects plFiberPlate : adding sky number 349 to list of science objects plFiberPlate : adding sky number 47 to list of science objects plFiberPlate : adding sky number 475 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 364 to list of science objects plFiberPlate : adding sky number 284 to list of science objects plFiberPlate : adding sky number 312 to list of science objects plFiberPlate : adding sky number 382 to list of science objects plFiberPlate : adding sky number 91 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 98 2 18 64 3 14 60 4 15 91 5 5 105 6 8 72 7 11 57 8 24 92 9 4 91 10 30 129 11 25 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 157 146 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 51 103 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 151 129 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 148 76 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 145 62 plFiberPlate : adding spectro-photo std with objId = 2662 0 3 54 122 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 54 27 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 149 108 plFiberPlate : 112 possible sky positions to use as objects from a possible 487. plFiberPlate : 72 possible sky positions to use as objects from a possible 486. plFiberPlate : 49 possible sky positions to use as objects from a possible 485. plFiberPlate : 29 possible sky positions to use as objects from a possible 484. plFiberPlate : 40 possible sky positions to use as objects from a possible 483. plFiberPlate : 15 possible sky positions to use as objects from a possible 482. plFiberPlate : 47 possible sky positions to use as objects from a possible 481. plFiberPlate : 61 possible sky positions to use as objects from a possible 480. plFiberPlate : 53 possible sky positions to use as objects from a possible 479. plFiberPlate : 38 possible sky positions to use as objects from a possible 478. plFiberPlate : 20 possible sky positions to use as objects from a possible 477. plFiberPlate : 8 possible sky positions to use as objects from a possible 476. plFiberPlate : 14 possible sky positions to use as objects from a possible 475. plFiberPlate : 9 possible sky positions to use as objects from a possible 474. plFiberPlate : 11 possible sky positions to use as objects from a possible 473. plFiberPlate : 30 possible sky positions to use as objects from a possible 472. plFiberPlate : 50 possible sky positions to use as objects from a possible 471. plFiberPlate : 54 possible sky positions to use as objects from a possible 470. plFiberPlate : 43 possible sky positions to use as objects from a possible 469. plFiberPlate : 20 possible sky positions to use as objects from a possible 468. plFiberPlate : 15 possible sky positions to use as objects from a possible 467. plFiberPlate : 4 possible sky positions to use as objects from a possible 466. plFiberPlate : 11 possible sky positions to use as objects from a possible 465. plFiberPlate : 8 possible sky positions to use as objects from a possible 464. plFiberPlate : 28 possible sky positions to use as objects from a possible 463. plFiberPlate : 45 possible sky positions to use as objects from a possible 462. plFiberPlate : 12 possible sky positions to use as objects from a possible 461. plFiberPlate : 4 possible sky positions to use as objects from a possible 460. plFiberPlate : 13 possible sky positions to use as objects from a possible 459. plFiberPlate : 8 possible sky positions to use as objects from a possible 458. plFiberPlate : 8 possible sky positions to use as objects from a possible 457. plFiberPlate : 12 possible sky positions to use as objects from a possible 456. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1029.ps/CPS Open ./plOverlay-1030.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1030.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1031.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 108 to list of science objects plFiberPlate : adding sky number 262 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 168 to list of science objects plFiberPlate : adding sky number 213 to list of science objects plFiberPlate : adding sky number 183 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 155 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 95 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 362 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 89 2 15 62 3 17 48 4 21 51 5 21 59 6 15 50 7 16 54 8 18 83 9 28 80 10 28 111 11 22 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1033 1 2 73 45 plFiberPlate : adding spectro-photo std with objId = 1033 1 3 68 77 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 32 98 plFiberPlate : adding spectro-photo std with objId = 1033 1 6 67 33 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 71 65 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 18 147 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 31 81 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 31 94 plFiberPlate : 77 possible sky positions to use as objects from a possible 370. plFiberPlate : 58 possible sky positions to use as objects from a possible 369. plFiberPlate : 38 possible sky positions to use as objects from a possible 368. plFiberPlate : 28 possible sky positions to use as objects from a possible 367. plFiberPlate : 20 possible sky positions to use as objects from a possible 366. plFiberPlate : 18 possible sky positions to use as objects from a possible 365. plFiberPlate : 41 possible sky positions to use as objects from a possible 364. plFiberPlate : 52 possible sky positions to use as objects from a possible 363. plFiberPlate : 52 possible sky positions to use as objects from a possible 362. plFiberPlate : 37 possible sky positions to use as objects from a possible 361. plFiberPlate : 23 possible sky positions to use as objects from a possible 360. plFiberPlate : 20 possible sky positions to use as objects from a possible 359. plFiberPlate : 12 possible sky positions to use as objects from a possible 358. plFiberPlate : 19 possible sky positions to use as objects from a possible 357. plFiberPlate : 18 possible sky positions to use as objects from a possible 356. plFiberPlate : 21 possible sky positions to use as objects from a possible 355. plFiberPlate : 38 possible sky positions to use as objects from a possible 354. plFiberPlate : 36 possible sky positions to use as objects from a possible 353. plFiberPlate : 14 possible sky positions to use as objects from a possible 352. plFiberPlate : 14 possible sky positions to use as objects from a possible 351. plFiberPlate : 4 possible sky positions to use as objects from a possible 350. plFiberPlate : 12 possible sky positions to use as objects from a possible 349. plFiberPlate : 12 possible sky positions to use as objects from a possible 348. plFiberPlate : 8 possible sky positions to use as objects from a possible 347. plFiberPlate : 26 possible sky positions to use as objects from a possible 346. plFiberPlate : 23 possible sky positions to use as objects from a possible 345. plFiberPlate : 15 possible sky positions to use as objects from a possible 344. plFiberPlate : 13 possible sky positions to use as objects from a possible 343. plFiberPlate : 8 possible sky positions to use as objects from a possible 342. plFiberPlate : 7 possible sky positions to use as objects from a possible 341. plFiberPlate : 5 possible sky positions to use as objects from a possible 340. plFiberPlate : 13 possible sky positions to use as objects from a possible 339. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1030.ps/CPS Open ./plOverlay-1031.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1031.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1032.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 172 to list of science objects plFiberPlate : adding sky number 293 to list of science objects plFiberPlate : adding sky number 158 to list of science objects plFiberPlate : adding sky number 249 to list of science objects plFiberPlate : adding sky number 161 to list of science objects plFiberPlate : adding sky number 254 to list of science objects plFiberPlate : adding sky number 213 to list of science objects plFiberPlate : adding sky number 73 to list of science objects plFiberPlate : adding sky number 275 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 246 to list of science objects plFiberPlate : adding sky number 129 to list of science objects plFiberPlate : adding sky number 386 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 372 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 31 79 2 12 49 3 19 62 4 36 97 5 27 105 6 19 66 7 17 53 8 23 82 9 28 87 10 37 120 11 23 71 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 39 106 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 31 159 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 30 99 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 86 116 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 31 64 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 34 130 plFiberPlate : adding spectro-photo std with objId = 1033 1 3 83 88 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 39 131 plFiberPlate : 100 possible sky positions to use as objects from a possible 440. plFiberPlate : 35 possible sky positions to use as objects from a possible 439. plFiberPlate : 11 possible sky positions to use as objects from a possible 438. plFiberPlate : 16 possible sky positions to use as objects from a possible 437. plFiberPlate : 12 possible sky positions to use as objects from a possible 436. plFiberPlate : 19 possible sky positions to use as objects from a possible 435. plFiberPlate : 18 possible sky positions to use as objects from a possible 434. plFiberPlate : 73 possible sky positions to use as objects from a possible 433. plFiberPlate : 58 possible sky positions to use as objects from a possible 432. plFiberPlate : 28 possible sky positions to use as objects from a possible 431. plFiberPlate : 14 possible sky positions to use as objects from a possible 430. plFiberPlate : 5 possible sky positions to use as objects from a possible 429. plFiberPlate : 5 possible sky positions to use as objects from a possible 428. plFiberPlate : 14 possible sky positions to use as objects from a possible 427. plFiberPlate : 8 possible sky positions to use as objects from a possible 426. plFiberPlate : 28 possible sky positions to use as objects from a possible 425. plFiberPlate : 86 possible sky positions to use as objects from a possible 424. plFiberPlate : 65 possible sky positions to use as objects from a possible 423. plFiberPlate : 45 possible sky positions to use as objects from a possible 422. plFiberPlate : 15 possible sky positions to use as objects from a possible 421. plFiberPlate : 16 possible sky positions to use as objects from a possible 420. plFiberPlate : 23 possible sky positions to use as objects from a possible 419. plFiberPlate : 11 possible sky positions to use as objects from a possible 418. plFiberPlate : 24 possible sky positions to use as objects from a possible 417. plFiberPlate : 20 possible sky positions to use as objects from a possible 416. plFiberPlate : 35 possible sky positions to use as objects from a possible 415. plFiberPlate : 25 possible sky positions to use as objects from a possible 414. plFiberPlate : 13 possible sky positions to use as objects from a possible 413. plFiberPlate : 12 possible sky positions to use as objects from a possible 412. plFiberPlate : 10 possible sky positions to use as objects from a possible 411. plFiberPlate : 6 possible sky positions to use as objects from a possible 410. plFiberPlate : 9 possible sky positions to use as objects from a possible 409. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1031.ps/CPS Open ./plOverlay-1032.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1032.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1033.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 410 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 246 to list of science objects plFiberPlate : adding sky number 76 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 312 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 366 to list of science objects plFiberPlate : adding sky number 85 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 374 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 78 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 107 2 29 63 3 29 51 4 42 68 5 24 104 6 20 58 7 28 54 8 30 86 9 26 89 10 44 113 11 34 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 91 12 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 55 187 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 42 55 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 53 120 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 53 80 plFiberPlate : adding spectro-photo std with objId = 1033 1 2 106 67 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 43 87 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 49 68 plFiberPlate : 80 possible sky positions to use as objects from a possible 442. plFiberPlate : 58 possible sky positions to use as objects from a possible 441. plFiberPlate : 33 possible sky positions to use as objects from a possible 440. plFiberPlate : 25 possible sky positions to use as objects from a possible 439. plFiberPlate : 19 possible sky positions to use as objects from a possible 438. plFiberPlate : 25 possible sky positions to use as objects from a possible 437. plFiberPlate : 49 possible sky positions to use as objects from a possible 436. plFiberPlate : 51 possible sky positions to use as objects from a possible 435. plFiberPlate : 37 possible sky positions to use as objects from a possible 434. plFiberPlate : 20 possible sky positions to use as objects from a possible 433. plFiberPlate : 13 possible sky positions to use as objects from a possible 432. plFiberPlate : 5 possible sky positions to use as objects from a possible 431. plFiberPlate : 20 possible sky positions to use as objects from a possible 430. plFiberPlate : 17 possible sky positions to use as objects from a possible 429. plFiberPlate : 18 possible sky positions to use as objects from a possible 428. plFiberPlate : 16 possible sky positions to use as objects from a possible 427. plFiberPlate : 69 possible sky positions to use as objects from a possible 426. plFiberPlate : 41 possible sky positions to use as objects from a possible 425. plFiberPlate : 23 possible sky positions to use as objects from a possible 424. plFiberPlate : 13 possible sky positions to use as objects from a possible 423. plFiberPlate : 7 possible sky positions to use as objects from a possible 422. plFiberPlate : 7 possible sky positions to use as objects from a possible 421. plFiberPlate : 21 possible sky positions to use as objects from a possible 420. plFiberPlate : 21 possible sky positions to use as objects from a possible 419. plFiberPlate : 11 possible sky positions to use as objects from a possible 418. plFiberPlate : 41 possible sky positions to use as objects from a possible 417. plFiberPlate : 31 possible sky positions to use as objects from a possible 416. plFiberPlate : 21 possible sky positions to use as objects from a possible 415. plFiberPlate : 8 possible sky positions to use as objects from a possible 414. plFiberPlate : 14 possible sky positions to use as objects from a possible 413. plFiberPlate : 12 possible sky positions to use as objects from a possible 412. plFiberPlate : 24 possible sky positions to use as objects from a possible 411. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1032.ps/CPS Open ./plOverlay-1033.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1033.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1034.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 214 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : adding sky number 222 to list of science objects plFiberPlate : adding sky number 155 to list of science objects plFiberPlate : adding sky number 231 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 265 to list of science objects plFiberPlate : adding sky number 320 to list of science objects plFiberPlate : adding sky number 242 to list of science objects plFiberPlate : adding sky number 149 to list of science objects plFiberPlate : adding sky number 348 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 115 to list of science objects plFiberPlate : adding sky number 289 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 41 84 2 22 56 3 14 54 4 21 88 5 31 110 6 16 67 7 17 46 8 33 72 9 25 76 10 29 101 11 27 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 65 44 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 70 12 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 57 22 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 64 12 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 111 29 plFiberPlate : adding spectro-photo std with objId = 1033 1 1 106 58 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 68 60 plFiberPlate : adding spectro-photo std with objId = 1033 1 6 113 68 plFiberPlate : 92 possible sky positions to use as objects from a possible 430. plFiberPlate : 64 possible sky positions to use as objects from a possible 429. plFiberPlate : 39 possible sky positions to use as objects from a possible 428. plFiberPlate : 25 possible sky positions to use as objects from a possible 427. plFiberPlate : 18 possible sky positions to use as objects from a possible 426. plFiberPlate : 12 possible sky positions to use as objects from a possible 425. plFiberPlate : 35 possible sky positions to use as objects from a possible 424. plFiberPlate : 62 possible sky positions to use as objects from a possible 423. plFiberPlate : 38 possible sky positions to use as objects from a possible 422. plFiberPlate : 22 possible sky positions to use as objects from a possible 421. plFiberPlate : 14 possible sky positions to use as objects from a possible 420. plFiberPlate : 13 possible sky positions to use as objects from a possible 419. plFiberPlate : 9 possible sky positions to use as objects from a possible 418. plFiberPlate : 11 possible sky positions to use as objects from a possible 417. plFiberPlate : 28 possible sky positions to use as objects from a possible 416. plFiberPlate : 12 possible sky positions to use as objects from a possible 415. plFiberPlate : 54 possible sky positions to use as objects from a possible 414. plFiberPlate : 35 possible sky positions to use as objects from a possible 413. plFiberPlate : 23 possible sky positions to use as objects from a possible 412. plFiberPlate : 10 possible sky positions to use as objects from a possible 411. plFiberPlate : 8 possible sky positions to use as objects from a possible 410. plFiberPlate : 7 possible sky positions to use as objects from a possible 409. plFiberPlate : 11 possible sky positions to use as objects from a possible 408. plFiberPlate : 20 possible sky positions to use as objects from a possible 407. plFiberPlate : 16 possible sky positions to use as objects from a possible 406. plFiberPlate : 59 possible sky positions to use as objects from a possible 405. plFiberPlate : 41 possible sky positions to use as objects from a possible 404. plFiberPlate : 14 possible sky positions to use as objects from a possible 403. plFiberPlate : 12 possible sky positions to use as objects from a possible 402. plFiberPlate : 9 possible sky positions to use as objects from a possible 401. plFiberPlate : 6 possible sky positions to use as objects from a possible 400. plFiberPlate : 8 possible sky positions to use as objects from a possible 399. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1033.ps/CPS Open ./plOverlay-1034.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1034.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1035.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 236 to list of science objects plFiberPlate : adding sky number 336 to list of science objects plFiberPlate : adding sky number 378 to list of science objects plFiberPlate : adding sky number 378 to list of science objects plFiberPlate : adding sky number 28 to list of science objects plFiberPlate : adding sky number 338 to list of science objects plFiberPlate : adding sky number 382 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 69 to list of science objects plFiberPlate : adding sky number 126 to list of science objects plFiberPlate : adding sky number 69 to list of science objects plFiberPlate : adding sky number 118 to list of science objects plFiberPlate : adding sky number 350 to list of science objects plFiberPlate : adding sky number 222 to list of science objects plFiberPlate : adding sky number 15 to list of science objects plFiberPlate : adding sky number 85 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 39 89 2 20 57 3 26 53 4 33 85 5 44 86 6 29 47 7 20 48 8 27 74 9 25 69 10 44 125 11 32 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 77 81 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 76 58 plFiberPlate : adding spectro-photo std with objId = 1033 1 6 128 95 plFiberPlate : adding spectro-photo std with objId = 1033 1 2 121 128 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 79 90 plFiberPlate : adding spectro-photo std with objId = 1033 1 2 122 34 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 68 92 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 73 70 plFiberPlate : 95 possible sky positions to use as objects from a possible 412. plFiberPlate : 51 possible sky positions to use as objects from a possible 411. plFiberPlate : 21 possible sky positions to use as objects from a possible 410. plFiberPlate : 12 possible sky positions to use as objects from a possible 409. plFiberPlate : 22 possible sky positions to use as objects from a possible 408. plFiberPlate : 16 possible sky positions to use as objects from a possible 407. plFiberPlate : 39 possible sky positions to use as objects from a possible 406. plFiberPlate : 66 possible sky positions to use as objects from a possible 405. plFiberPlate : 51 possible sky positions to use as objects from a possible 404. plFiberPlate : 38 possible sky positions to use as objects from a possible 403. plFiberPlate : 11 possible sky positions to use as objects from a possible 402. plFiberPlate : 18 possible sky positions to use as objects from a possible 401. plFiberPlate : 12 possible sky positions to use as objects from a possible 400. plFiberPlate : 12 possible sky positions to use as objects from a possible 399. plFiberPlate : 13 possible sky positions to use as objects from a possible 398. plFiberPlate : 12 possible sky positions to use as objects from a possible 397. plFiberPlate : 64 possible sky positions to use as objects from a possible 396. plFiberPlate : 40 possible sky positions to use as objects from a possible 395. plFiberPlate : 11 possible sky positions to use as objects from a possible 394. plFiberPlate : 9 possible sky positions to use as objects from a possible 393. plFiberPlate : 5 possible sky positions to use as objects from a possible 392. plFiberPlate : 5 possible sky positions to use as objects from a possible 391. plFiberPlate : 8 possible sky positions to use as objects from a possible 390. plFiberPlate : 10 possible sky positions to use as objects from a possible 389. plFiberPlate : 10 possible sky positions to use as objects from a possible 388. plFiberPlate : 30 possible sky positions to use as objects from a possible 387. plFiberPlate : 23 possible sky positions to use as objects from a possible 386. plFiberPlate : 12 possible sky positions to use as objects from a possible 385. plFiberPlate : 2 possible sky positions to use as objects from a possible 384. plFiberPlate : 7 possible sky positions to use as objects from a possible 383. plFiberPlate : 10 possible sky positions to use as objects from a possible 382. plFiberPlate : 12 possible sky positions to use as objects from a possible 381. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1034.ps/CPS Open ./plOverlay-1035.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1035.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1036.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 10 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 248 to list of science objects plFiberPlate : adding sky number 260 to list of science objects plFiberPlate : adding sky number 73 to list of science objects plFiberPlate : adding sky number 391 to list of science objects plFiberPlate : adding sky number 15 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : adding sky number 290 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 293 to list of science objects plFiberPlate : adding sky number 428 to list of science objects plFiberPlate : adding sky number 175 to list of science objects plFiberPlate : adding sky number 339 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 39 102 2 15 63 3 18 52 4 38 89 5 30 102 6 17 70 7 15 68 8 31 97 9 21 98 10 34 101 11 29 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 89 75 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 83 108 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 88 74 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 93 73 plFiberPlate : adding spectro-photo std with objId = 94 4 2 22 83 plFiberPlate : adding spectro-photo std with objId = 94 4 5 22 167 plFiberPlate : adding spectro-photo std with objId = 1033 1 4 130 63 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 91 41 plFiberPlate : 96 possible sky positions to use as objects from a possible 465. plFiberPlate : 51 possible sky positions to use as objects from a possible 464. plFiberPlate : 21 possible sky positions to use as objects from a possible 463. plFiberPlate : 23 possible sky positions to use as objects from a possible 462. plFiberPlate : 13 possible sky positions to use as objects from a possible 461. plFiberPlate : 17 possible sky positions to use as objects from a possible 460. plFiberPlate : 38 possible sky positions to use as objects from a possible 459. plFiberPlate : 72 possible sky positions to use as objects from a possible 458. plFiberPlate : 47 possible sky positions to use as objects from a possible 457. plFiberPlate : 18 possible sky positions to use as objects from a possible 456. plFiberPlate : 7 possible sky positions to use as objects from a possible 455. plFiberPlate : 5 possible sky positions to use as objects from a possible 454. plFiberPlate : 10 possible sky positions to use as objects from a possible 453. plFiberPlate : 12 possible sky positions to use as objects from a possible 452. plFiberPlate : 26 possible sky positions to use as objects from a possible 451. plFiberPlate : 17 possible sky positions to use as objects from a possible 450. plFiberPlate : 31 possible sky positions to use as objects from a possible 449. plFiberPlate : 24 possible sky positions to use as objects from a possible 448. plFiberPlate : 17 possible sky positions to use as objects from a possible 447. plFiberPlate : 7 possible sky positions to use as objects from a possible 446. plFiberPlate : 7 possible sky positions to use as objects from a possible 445. plFiberPlate : 11 possible sky positions to use as objects from a possible 444. plFiberPlate : 13 possible sky positions to use as objects from a possible 443. plFiberPlate : 14 possible sky positions to use as objects from a possible 442. plFiberPlate : 18 possible sky positions to use as objects from a possible 441. plFiberPlate : 45 possible sky positions to use as objects from a possible 440. plFiberPlate : 32 possible sky positions to use as objects from a possible 439. plFiberPlate : 21 possible sky positions to use as objects from a possible 438. plFiberPlate : 16 possible sky positions to use as objects from a possible 437. plFiberPlate : 10 possible sky positions to use as objects from a possible 436. plFiberPlate : 6 possible sky positions to use as objects from a possible 435. plFiberPlate : 9 possible sky positions to use as objects from a possible 434. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1035.ps/CPS Open ./plOverlay-1036.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1036.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate ./plPlugMapP-1037.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 188 to list of science objects plFiberPlate : adding sky number 467 to list of science objects plFiberPlate : adding sky number 283 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : adding sky number 377 to list of science objects plFiberPlate : adding sky number 410 to list of science objects plFiberPlate : adding sky number 346 to list of science objects plFiberPlate : adding sky number 6 to list of science objects plFiberPlate : adding sky number 346 to list of science objects plFiberPlate : adding sky number 195 to list of science objects plFiberPlate : adding sky number 168 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 84 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 41 86 2 25 45 3 20 64 4 37 96 5 39 101 6 20 63 7 22 71 8 42 105 9 27 91 10 34 116 11 31 73 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 25 63 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 99 78 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 102 64 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 106 49 plFiberPlate : adding spectro-photo std with objId = 94 4 2 23 52 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 101 107 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 109 72 plFiberPlate : adding spectro-photo std with objId = 1056 1 4 96 89 plFiberPlate : 106 possible sky positions to use as objects from a possible 461. plFiberPlate : 67 possible sky positions to use as objects from a possible 460. plFiberPlate : 44 possible sky positions to use as objects from a possible 459. plFiberPlate : 18 possible sky positions to use as objects from a possible 458. plFiberPlate : 18 possible sky positions to use as objects from a possible 457. plFiberPlate : 19 possible sky positions to use as objects from a possible 456. plFiberPlate : 24 possible sky positions to use as objects from a possible 455. plFiberPlate : 87 possible sky positions to use as objects from a possible 454. plFiberPlate : 36 possible sky positions to use as objects from a possible 453. plFiberPlate : 15 possible sky positions to use as objects from a possible 452. plFiberPlate : 9 possible sky positions to use as objects from a possible 451. plFiberPlate : 13 possible sky positions to use as objects from a possible 450. plFiberPlate : 8 possible sky positions to use as objects from a possible 449. plFiberPlate : 10 possible sky positions to use as objects from a possible 448. plFiberPlate : 19 possible sky positions to use as objects from a possible 447. plFiberPlate : 17 possible sky positions to use as objects from a possible 446. plFiberPlate : 80 possible sky positions to use as objects from a possible 445. plFiberPlate : 56 possible sky positions to use as objects from a possible 444. plFiberPlate : 24 possible sky positions to use as objects from a possible 443. plFiberPlate : 11 possible sky positions to use as objects from a possible 442. plFiberPlate : 11 possible sky positions to use as objects from a possible 441. plFiberPlate : 19 possible sky positions to use as objects from a possible 440. plFiberPlate : 28 possible sky positions to use as objects from a possible 439. plFiberPlate : 10 possible sky positions to use as objects from a possible 438. plFiberPlate : 9 possible sky positions to use as objects from a possible 437. plFiberPlate : 40 possible sky positions to use as objects from a possible 436. plFiberPlate : 24 possible sky positions to use as objects from a possible 435. plFiberPlate : 10 possible sky positions to use as objects from a possible 434. plFiberPlate : 10 possible sky positions to use as objects from a possible 433. plFiberPlate : 16 possible sky positions to use as objects from a possible 432. plFiberPlate : 8 possible sky positions to use as objects from a possible 431. plFiberPlate : 16 possible sky positions to use as objects from a possible 430. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close ./plOverlay-1036.ps/CPS Open ./plOverlay-1037.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close ./plOverlay-1037.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed May 15 18:16:35 CDT 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_77/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_77/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 17 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1021.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1021.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1021.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1022.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1022.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1022.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1023.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.0832,4.1833) and (12.20,3.84) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1023.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1023.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1024.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1024.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1024.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1025.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.5396,-5.2991) and (11.89,-4.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1025.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1025.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1026.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6370,-3.6657) and (-12.64,-1.89) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1026.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1026.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1027.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1027.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1027.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1028.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1028.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1028.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1029.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.9704,-4.2641) and (-12.57,-2.35) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1029.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1029.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1030.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1030.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.7435,10.4888) and (-12.22,-2.95) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1030.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1031.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1031.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1031.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1032.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1032.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1032.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1033.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4479,5.6703) and (11.86,4.42) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1033.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1033.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1034.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1034.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1034.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1345,7.8107) and (-2.78,10.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1035.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.1519,-9.8365) and (7.30,-10.49) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1035.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1035.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1036.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1036.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1036.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1037.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7177,-6.9050) and (11.12,-6.05) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1037.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file ./plFanuc-1037.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed May 15 18:17:33 CDT 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_77/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_77/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e78768 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 17 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1021 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1022 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1023 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1024 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1025 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1026 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1027 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1028 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1029 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1030 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1031 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1032 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1033 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1034 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1035 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1036 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1037 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed May 15 18:18:01 CDT 2002 Begin running plateEnder dr2002.05.3 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_9/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_77/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_77/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_8/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.05.3 -morePipes 1 failed. PS: Read file for stderr output of this job.