Sender: LSF System Subject: Job 12065: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Jan 6 17:26:50 2003 Results reported at Mon Jan 6 17:28:55 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_151 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.01.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 111.61 sec. Max Memory : 10 MB Max Swap : 32 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Jan 6 17:26:52 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Jan 6 17:26:54 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_55/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_151/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Mon Jan 6 17:26:54 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_151/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_55/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Mon Jan 6 17:26:54 CST 2003 Begin running plate --------------------------------------------------------------- Mon Jan 6 17:26:54 CST 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e44668 makePlates : beginning loop over plObs chain; makePlates : making 8 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0882.par makePlates : plateInfo struct for plate 1234 : (h4).mjd 52691 (h4).raCen 145.9439 (h4).decCen 7.773565 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.944 7.774 145.944 9.274 plMakePlateFromTile : mjd of obs : 52691.622341 Observed HA/dec of plate center, fiducial point (deg) : -25.002 7.768 -25.003 9.267 The rotation angle of the fid. point is 39.358822 plMakePlateFromTile : beginning loop over 1239 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0883.par makePlates : plateInfo struct for plate 1235 : (h4).mjd 52691 (h4).raCen 148.4889 (h4).decCen 8.088879 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 148.489 8.089 148.489 9.589 plMakePlateFromTile : mjd of obs : 52691.621078 Observed HA/dec of plate center, fiducial point (deg) : -28.002 8.083 -28.003 9.582 The rotation angle of the fid. point is 42.455724 plMakePlateFromTile : beginning loop over 1253 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0884.par makePlates : plateInfo struct for plate 1236 : (h4).mjd 52691 (h4).raCen 151.0654 (h4).decCen 8.304953 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.065 8.305 151.065 9.805 plMakePlateFromTile : mjd of obs : 52691.703032 Observed HA/dec of plate center, fiducial point (deg) : -1.002 8.297 -1.003 9.797 The rotation angle of the fid. point is 2.042446 plMakePlateFromTile : beginning loop over 1249 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0885.par makePlates : plateInfo struct for plate 1237 : (h4).mjd 52691 (h4).raCen 153.3797 (h4).decCen 8.547749 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 153.380 8.548 153.380 10.048 plMakePlateFromTile : mjd of obs : 52691.784261 Observed HA/dec of plate center, fiducial point (deg) : 25.998 8.541 25.997 10.040 The rotation angle of the fid. point is -41.044858 plMakePlateFromTile : beginning loop over 1231 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0886.par makePlates : plateInfo struct for plate 1238 : (h4).mjd 52691 (h4).raCen 155.4197 (h4).decCen 8.698177 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.420 8.698 155.420 10.198 plMakePlateFromTile : mjd of obs : 52691.784369 Observed HA/dec of plate center, fiducial point (deg) : 23.998 8.691 23.997 10.190 The rotation angle of the fid. point is -39.201220 plMakePlateFromTile : beginning loop over 1252 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0887.par makePlates : plateInfo struct for plate 1239 : (h4).mjd 52691 (h4).raCen 157.2498 (h4).decCen 8.903301 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.250 8.903 157.250 10.403 plMakePlateFromTile : mjd of obs : 52691.783897 Observed HA/dec of plate center, fiducial point (deg) : 21.998 8.895 21.997 10.395 The rotation angle of the fid. point is -37.229172 plMakePlateFromTile : beginning loop over 1239 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0888.par makePlates : plateInfo struct for plate 1240 : (h4).mjd 52691 (h4).raCen 159.5286 (h4).decCen 9.02494 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.529 9.025 159.529 10.525 plMakePlateFromTile : mjd of obs : 52691.784667 Observed HA/dec of plate center, fiducial point (deg) : 19.998 9.016 19.997 10.516 The rotation angle of the fid. point is -34.975661 plMakePlateFromTile : beginning loop over 1265 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-165.65, -81.35, 5.8) and (-165.65, -81.46, 7.7) checkLTHo : distance = 0.115, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-165.65, -81.46, 7.7) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk59/complete//plPlugMapT-0889.par makePlates : plateInfo struct for plate 1241 : (h4).mjd 52691 (h4).raCen 161.7466 (h4).decCen 9.223117 (h4).haCen 33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.747 9.223 161.747 10.723 plMakePlateFromTile : mjd of obs : 52691.826836 Observed HA/dec of plate center, fiducial point (deg) : 32.998 9.215 32.998 10.715 The rotation angle of the fid. point is -47.365415 plMakePlateFromTile : beginning loop over 1195 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Jan 6 17:27:16 CST 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 8 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1234.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 103 2 6 113 3 8 109 4 10 116 5 8 90 6 4 37 7 3 46 8 9 84 9 5 81 10 17 157 11 11 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 5 42 106 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 171 47 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 173 60 plFiberPlate : adding spectro-photo std with objId = 3518 20 1 40 32 plFiberPlate : adding spectro-photo std with objId = 3518 20 1 32 55 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 37 82 plFiberPlate : adding spectro-photo std with objId = 3518 20 3 44 182 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 171 103 plFiberPlate : 100 possible sky positions to use as objects from a possible 517. plFiberPlate : 61 possible sky positions to use as objects from a possible 516. plFiberPlate : 53 possible sky positions to use as objects from a possible 515. plFiberPlate : 55 possible sky positions to use as objects from a possible 514. plFiberPlate : 31 possible sky positions to use as objects from a possible 513. plFiberPlate : 28 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 52 possible sky positions to use as objects from a possible 510. plFiberPlate : 33 possible sky positions to use as objects from a possible 509. plFiberPlate : 24 possible sky positions to use as objects from a possible 508. plFiberPlate : 8 possible sky positions to use as objects from a possible 507. plFiberPlate : 17 possible sky positions to use as objects from a possible 506. plFiberPlate : 2 possible sky positions to use as objects from a possible 505. plFiberPlate : 7 possible sky positions to use as objects from a possible 504. plFiberPlate : 3 possible sky positions to use as objects from a possible 503. plFiberPlate : 14 possible sky positions to use as objects from a possible 502. plFiberPlate : 49 possible sky positions to use as objects from a possible 501. plFiberPlate : 38 possible sky positions to use as objects from a possible 500. plFiberPlate : 20 possible sky positions to use as objects from a possible 499. plFiberPlate : 12 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 13 possible sky positions to use as objects from a possible 496. plFiberPlate : 9 possible sky positions to use as objects from a possible 495. plFiberPlate : 7 possible sky positions to use as objects from a possible 494. plFiberPlate : 21 possible sky positions to use as objects from a possible 493. plFiberPlate : 32 possible sky positions to use as objects from a possible 492. plFiberPlate : 24 possible sky positions to use as objects from a possible 491. plFiberPlate : 8 possible sky positions to use as objects from a possible 490. plFiberPlate : 7 possible sky positions to use as objects from a possible 489. plFiberPlate : 7 possible sky positions to use as objects from a possible 488. plFiberPlate : 7 possible sky positions to use as objects from a possible 487. plFiberPlate : 12 possible sky positions to use as objects from a possible 486. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1234.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1234.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1235.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 119 2 17 104 3 7 93 4 17 97 5 4 103 6 3 39 7 3 55 8 8 100 9 2 94 10 21 141 11 16 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 1 48 124 plFiberPlate : adding spectro-photo std with objId = 3518 20 2 51 2 plFiberPlate : adding spectro-photo std with objId = 3518 20 2 57 8 plFiberPlate : adding spectro-photo std with objId = 3031 20 4 187 99 plFiberPlate : adding spectro-photo std with objId = 3518 20 5 46 19 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 197 42 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 47 51 plFiberPlate : adding spectro-photo std with objId = 3518 20 3 44 182 plFiberPlate : 100 possible sky positions to use as objects from a possible 527. plFiberPlate : 97 possible sky positions to use as objects from a possible 526. plFiberPlate : 50 possible sky positions to use as objects from a possible 525. plFiberPlate : 52 possible sky positions to use as objects from a possible 524. plFiberPlate : 48 possible sky positions to use as objects from a possible 523. plFiberPlate : 44 possible sky positions to use as objects from a possible 522. plFiberPlate : 55 possible sky positions to use as objects from a possible 521. plFiberPlate : 70 possible sky positions to use as objects from a possible 520. plFiberPlate : 41 possible sky positions to use as objects from a possible 519. plFiberPlate : 23 possible sky positions to use as objects from a possible 518. plFiberPlate : 17 possible sky positions to use as objects from a possible 517. plFiberPlate : 13 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 18 possible sky positions to use as objects from a possible 514. plFiberPlate : 10 possible sky positions to use as objects from a possible 513. plFiberPlate : 22 possible sky positions to use as objects from a possible 512. plFiberPlate : 60 possible sky positions to use as objects from a possible 511. plFiberPlate : 32 possible sky positions to use as objects from a possible 510. plFiberPlate : 28 possible sky positions to use as objects from a possible 509. plFiberPlate : 25 possible sky positions to use as objects from a possible 508. plFiberPlate : 12 possible sky positions to use as objects from a possible 507. plFiberPlate : 16 possible sky positions to use as objects from a possible 506. plFiberPlate : 18 possible sky positions to use as objects from a possible 505. plFiberPlate : 6 possible sky positions to use as objects from a possible 504. plFiberPlate : 19 possible sky positions to use as objects from a possible 503. plFiberPlate : 45 possible sky positions to use as objects from a possible 502. plFiberPlate : 36 possible sky positions to use as objects from a possible 501. plFiberPlate : 13 possible sky positions to use as objects from a possible 500. plFiberPlate : 20 possible sky positions to use as objects from a possible 499. plFiberPlate : 12 possible sky positions to use as objects from a possible 498. plFiberPlate : 22 possible sky positions to use as objects from a possible 497. plFiberPlate : 9 possible sky positions to use as objects from a possible 496. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1234.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1235.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1235.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1236.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 122 2 14 107 3 7 95 4 7 109 5 3 105 6 1 60 7 2 55 8 8 87 9 4 107 10 22 144 11 16 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 5 63 60 plFiberPlate : adding spectro-photo std with objId = 3518 20 5 69 133 plFiberPlate : adding spectro-photo std with objId = 3518 20 2 65 12 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 201 94 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 199 73 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 64 92 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 210 110 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 68 79 plFiberPlate : 91 possible sky positions to use as objects from a possible 546. plFiberPlate : 63 possible sky positions to use as objects from a possible 545. plFiberPlate : 35 possible sky positions to use as objects from a possible 544. plFiberPlate : 26 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 32 possible sky positions to use as objects from a possible 541. plFiberPlate : 27 possible sky positions to use as objects from a possible 540. plFiberPlate : 83 possible sky positions to use as objects from a possible 539. plFiberPlate : 53 possible sky positions to use as objects from a possible 538. plFiberPlate : 31 possible sky positions to use as objects from a possible 537. plFiberPlate : 17 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 12 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 66 possible sky positions to use as objects from a possible 530. plFiberPlate : 54 possible sky positions to use as objects from a possible 529. plFiberPlate : 38 possible sky positions to use as objects from a possible 528. plFiberPlate : 23 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 19 possible sky positions to use as objects from a possible 524. plFiberPlate : 9 possible sky positions to use as objects from a possible 523. plFiberPlate : 6 possible sky positions to use as objects from a possible 522. plFiberPlate : 42 possible sky positions to use as objects from a possible 521. plFiberPlate : 28 possible sky positions to use as objects from a possible 520. plFiberPlate : 19 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 8 possible sky positions to use as objects from a possible 517. plFiberPlate : 6 possible sky positions to use as objects from a possible 516. plFiberPlate : 6 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1235.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1236.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1236.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1237.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 118 2 10 108 3 10 97 4 13 109 5 4 114 6 2 54 7 4 50 8 5 86 9 3 105 10 13 142 11 14 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 1 90 3 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 91 36 plFiberPlate : adding spectro-photo std with objId = 3518 20 3 77 87 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 78 46 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 230 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 229 77 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 227 23 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 228 5 plFiberPlate : 104 possible sky positions to use as objects from a possible 544. plFiberPlate : 70 possible sky positions to use as objects from a possible 543. plFiberPlate : 49 possible sky positions to use as objects from a possible 542. plFiberPlate : 18 possible sky positions to use as objects from a possible 541. plFiberPlate : 41 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 42 possible sky positions to use as objects from a possible 538. plFiberPlate : 49 possible sky positions to use as objects from a possible 537. plFiberPlate : 24 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 20 possible sky positions to use as objects from a possible 533. plFiberPlate : 4 possible sky positions to use as objects from a possible 532. plFiberPlate : 13 possible sky positions to use as objects from a possible 531. plFiberPlate : 10 possible sky positions to use as objects from a possible 530. plFiberPlate : 17 possible sky positions to use as objects from a possible 529. plFiberPlate : 47 possible sky positions to use as objects from a possible 528. plFiberPlate : 22 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 19 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 13 possible sky positions to use as objects from a possible 523. plFiberPlate : 4 possible sky positions to use as objects from a possible 522. plFiberPlate : 4 possible sky positions to use as objects from a possible 521. plFiberPlate : 11 possible sky positions to use as objects from a possible 520. plFiberPlate : 29 possible sky positions to use as objects from a possible 519. plFiberPlate : 28 possible sky positions to use as objects from a possible 518. plFiberPlate : 16 possible sky positions to use as objects from a possible 517. plFiberPlate : 5 possible sky positions to use as objects from a possible 516. plFiberPlate : 4 possible sky positions to use as objects from a possible 515. plFiberPlate : 14 possible sky positions to use as objects from a possible 514. plFiberPlate : 10 possible sky positions to use as objects from a possible 513. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1236.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1237.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1237.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1238.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 121 2 10 89 3 9 87 4 13 112 5 6 105 6 6 54 7 7 64 8 8 110 9 10 100 10 16 133 11 17 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 1 93 2 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 244 23 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 102 26 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 245 93 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 230 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 238 75 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 229 77 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 227 23 plFiberPlate : 102 possible sky positions to use as objects from a possible 542. plFiberPlate : 38 possible sky positions to use as objects from a possible 541. plFiberPlate : 19 possible sky positions to use as objects from a possible 540. plFiberPlate : 32 possible sky positions to use as objects from a possible 539. plFiberPlate : 11 possible sky positions to use as objects from a possible 538. plFiberPlate : 14 possible sky positions to use as objects from a possible 537. plFiberPlate : 57 possible sky positions to use as objects from a possible 536. plFiberPlate : 63 possible sky positions to use as objects from a possible 535. plFiberPlate : 25 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 4 possible sky positions to use as objects from a possible 532. plFiberPlate : 6 possible sky positions to use as objects from a possible 531. plFiberPlate : 3 possible sky positions to use as objects from a possible 530. plFiberPlate : 6 possible sky positions to use as objects from a possible 529. plFiberPlate : 24 possible sky positions to use as objects from a possible 528. plFiberPlate : 27 possible sky positions to use as objects from a possible 527. plFiberPlate : 58 possible sky positions to use as objects from a possible 526. plFiberPlate : 35 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 2 possible sky positions to use as objects from a possible 522. plFiberPlate : 4 possible sky positions to use as objects from a possible 521. plFiberPlate : 21 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 24 possible sky positions to use as objects from a possible 518. plFiberPlate : 46 possible sky positions to use as objects from a possible 517. plFiberPlate : 25 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 6 possible sky positions to use as objects from a possible 513. plFiberPlate : 21 possible sky positions to use as objects from a possible 512. plFiberPlate : 22 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1237.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1238.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1238.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1239.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 120 2 13 94 3 13 93 4 15 97 5 7 95 6 2 46 7 7 52 8 9 105 9 3 95 10 17 138 11 10 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 6 115 83 plFiberPlate : adding spectro-photo std with objId = 3518 20 2 104 52 plFiberPlate : adding spectro-photo std with objId = 3518 20 5 112 55 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 252 14 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 245 93 plFiberPlate : adding spectro-photo std with objId = 3518 20 4 113 10 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 249 83 plFiberPlate : adding spectro-photo std with objId = 3518 20 2 119 70 plFiberPlate : 118 possible sky positions to use as objects from a possible 526. plFiberPlate : 58 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 29 possible sky positions to use as objects from a possible 523. plFiberPlate : 7 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 37 possible sky positions to use as objects from a possible 520. plFiberPlate : 57 possible sky positions to use as objects from a possible 519. plFiberPlate : 46 possible sky positions to use as objects from a possible 518. plFiberPlate : 34 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 1 possible sky positions to use as objects from a possible 515. plFiberPlate : 5 possible sky positions to use as objects from a possible 514. plFiberPlate : 8 possible sky positions to use as objects from a possible 513. plFiberPlate : 5 possible sky positions to use as objects from a possible 512. plFiberPlate : 31 possible sky positions to use as objects from a possible 511. plFiberPlate : 78 possible sky positions to use as objects from a possible 510. plFiberPlate : 53 possible sky positions to use as objects from a possible 509. plFiberPlate : 48 possible sky positions to use as objects from a possible 508. plFiberPlate : 22 possible sky positions to use as objects from a possible 507. plFiberPlate : 7 possible sky positions to use as objects from a possible 506. plFiberPlate : 15 possible sky positions to use as objects from a possible 505. plFiberPlate : 7 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 10 possible sky positions to use as objects from a possible 502. plFiberPlate : 26 possible sky positions to use as objects from a possible 501. plFiberPlate : 10 possible sky positions to use as objects from a possible 500. plFiberPlate : 5 possible sky positions to use as objects from a possible 499. plFiberPlate : 2 possible sky positions to use as objects from a possible 498. plFiberPlate : 5 possible sky positions to use as objects from a possible 497. plFiberPlate : 12 possible sky positions to use as objects from a possible 496. plFiberPlate : 18 possible sky positions to use as objects from a possible 495. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1238.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1239.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1239.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1240.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 120 2 10 107 3 7 100 4 11 105 5 5 115 6 4 65 7 2 60 8 5 106 9 7 99 10 14 160 11 13 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 20 5 122 56 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 269 30 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 267 98 plFiberPlate : adding spectro-photo std with objId = 3518 20 2 121 6 plFiberPlate : adding spectro-photo std with objId = 3518 20 6 126 87 plFiberPlate : adding spectro-photo std with objId = 3518 20 2 119 70 plFiberPlate : adding spectro-photo std with objId = 3031 20 3 263 11 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 265 58 plFiberPlate : 133 possible sky positions to use as objects from a possible 572. plFiberPlate : 95 possible sky positions to use as objects from a possible 571. plFiberPlate : 38 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 33 possible sky positions to use as objects from a possible 568. plFiberPlate : 35 possible sky positions to use as objects from a possible 567. plFiberPlate : 32 possible sky positions to use as objects from a possible 566. plFiberPlate : 86 possible sky positions to use as objects from a possible 565. plFiberPlate : 66 possible sky positions to use as objects from a possible 564. plFiberPlate : 46 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : 15 possible sky positions to use as objects from a possible 561. plFiberPlate : 14 possible sky positions to use as objects from a possible 560. plFiberPlate : 18 possible sky positions to use as objects from a possible 559. plFiberPlate : 13 possible sky positions to use as objects from a possible 558. plFiberPlate : 11 possible sky positions to use as objects from a possible 557. plFiberPlate : 64 possible sky positions to use as objects from a possible 556. plFiberPlate : 38 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 12 possible sky positions to use as objects from a possible 553. plFiberPlate : 8 possible sky positions to use as objects from a possible 552. plFiberPlate : 13 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 9 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 54 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 9 possible sky positions to use as objects from a possible 545. plFiberPlate : 11 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 7 possible sky positions to use as objects from a possible 542. plFiberPlate : 16 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1239.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1240.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1240.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.3/plPlugMapP-1241.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 77 2 12 106 3 11 96 4 8 117 5 4 117 6 7 62 7 7 52 8 3 55 9 9 103 10 13 165 11 4 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 279 67 plFiberPlate : adding spectro-photo std with objId = 3518 20 1 135 20 plFiberPlate : adding spectro-photo std with objId = 3031 20 5 269 30 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 282 67 plFiberPlate : adding spectro-photo std with objId = 3031 20 2 279 14 plFiberPlate : adding spectro-photo std with objId = 3518 20 3 131 23 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 280 23 plFiberPlate : adding spectro-photo std with objId = 3031 20 6 279 37 plFiberPlate : 127 possible sky positions to use as objects from a possible 513. plFiberPlate : 77 possible sky positions to use as objects from a possible 512. plFiberPlate : 59 possible sky positions to use as objects from a possible 511. plFiberPlate : 65 possible sky positions to use as objects from a possible 510. plFiberPlate : 21 possible sky positions to use as objects from a possible 509. plFiberPlate : 34 possible sky positions to use as objects from a possible 508. plFiberPlate : 13 possible sky positions to use as objects from a possible 507. plFiberPlate : 97 possible sky positions to use as objects from a possible 506. plFiberPlate : 39 possible sky positions to use as objects from a possible 505. plFiberPlate : 27 possible sky positions to use as objects from a possible 504. plFiberPlate : 13 possible sky positions to use as objects from a possible 503. plFiberPlate : 15 possible sky positions to use as objects from a possible 502. plFiberPlate : 10 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 10 possible sky positions to use as objects from a possible 499. plFiberPlate : 1 possible sky positions to use as objects from a possible 498. plFiberPlate : 83 possible sky positions to use as objects from a possible 497. plFiberPlate : 40 possible sky positions to use as objects from a possible 496. plFiberPlate : 29 possible sky positions to use as objects from a possible 495. plFiberPlate : 18 possible sky positions to use as objects from a possible 494. plFiberPlate : 11 possible sky positions to use as objects from a possible 493. plFiberPlate : 15 possible sky positions to use as objects from a possible 492. plFiberPlate : 2 possible sky positions to use as objects from a possible 491. plFiberPlate : 3 possible sky positions to use as objects from a possible 490. plFiberPlate : 5 possible sky positions to use as objects from a possible 489. plFiberPlate : 52 possible sky positions to use as objects from a possible 488. plFiberPlate : 36 possible sky positions to use as objects from a possible 487. plFiberPlate : 18 possible sky positions to use as objects from a possible 486. plFiberPlate : 6 possible sky positions to use as objects from a possible 485. plFiberPlate : 9 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 17 possible sky positions to use as objects from a possible 482. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1240.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1241.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.3/plOverlay-1241.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Jan 6 17:27:39 CST 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 8 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1234.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5108,7.1631) and (-11.54,5.10) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1234.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1234.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1235.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4043,5.8148) and (-11.60,5.30) plMakeFanucCodes : fixed path between (-11.6016,5.3010) and (-12.04,4.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1235.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1235.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1236.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5812,-4.4219) and (-12.41,-2.69) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1236.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1236.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1237.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1237.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1237.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1238.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1238.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1238.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1239.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.9013,7.7684) and (-11.12,5.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1239.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1239.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1240.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1240.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1240.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1241.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5654,7.1162) and (-10.97,5.35) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1241.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.3/plFanuc-1241.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Jan 6 17:28:05 CST 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e456e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 8 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1234 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1235 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1236 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1237 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1238 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1239 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1240 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1241 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Jan 6 17:28:17 CST 2003 Begin running plateEnder dr2003.01.3 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_151/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_151/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.01.3 -morePipes 1 failed. PS: Read file for stderr output of this job.