Sender: LSF System Subject: Job 12706: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Jan 14 20:07:59 2003 Results reported at Tue Jan 14 20:10:32 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_158 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.01.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 137.25 sec. Max Memory : 11 MB Max Swap : 33 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Tue Jan 14 20:08:01 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Jan 14 20:08:04 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_55/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_158/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Tue Jan 14 20:08:04 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_158/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_55/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Tue Jan 14 20:08:05 CST 2003 Begin running plate --------------------------------------------------------------- Tue Jan 14 20:08:05 CST 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_158/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_158/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e44968 makePlates : beginning loop over plObs chain; makePlates : making 8 plates makePlates : making a plate from ./plPlugMapT-0890.par makePlates : plateInfo struct for plate 1242 : (h4).mjd 52691 (h4).raCen 57.4742 (h4).decCen -0.04059927 (h4).haCen 2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 57.474 -0.041 57.474 1.459 plMakePlateFromTile : mjd of obs : 52691.452061 Observed HA/dec of plate center, fiducial point (deg) : 1.998 -0.022 1.997 1.477 The rotation angle of the fid. point is -3.084202 plMakePlateFromTile : beginning loop over 1422 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9354.par makePlates : plateInfo struct for plate 1243 : (h4).mjd 52691 (h4).raCen 57.4742 (h4).decCen -0.04059927 (h4).haCen 2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 57.474 -0.041 57.474 1.459 plMakePlateFromTile : mjd of obs : 52691.452061 Observed HA/dec of plate center, fiducial point (deg) : 1.998 -0.022 1.997 1.477 The rotation angle of the fid. point is -3.084202 plMakePlateFromTile : beginning loop over 1366 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9355.par makePlates : plateInfo struct for plate 1244 : (h4).mjd 52691 (h4).raCen 82.51921 (h4).decCen 0.0358462 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 82.519 0.036 82.519 1.536 plMakePlateFromTile : mjd of obs : 52691.496507 Observed HA/dec of plate center, fiducial point (deg) : -7.002 0.048 -7.003 1.548 The rotation angle of the fid. point is 10.750595 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (105.00, -69.71, 6.7) and (105.00, -72.88, 2.2) checkLTHo : distance = 3.170, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(105.00, -69.71, 6.7) makePlates : making a plate from ./plPlugMapT-9356.par makePlates : plateInfo struct for plate 1245 : (h4).mjd 52691 (h4).raCen 84.35356 (h4).decCen -0.04230184 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 84.354 -0.042 84.354 1.458 plMakePlateFromTile : mjd of obs : 52691.496047 Observed HA/dec of plate center, fiducial point (deg) : -9.002 -0.030 -9.003 1.469 The rotation angle of the fid. point is 13.664368 plMakePlateFromTile : beginning loop over 1505 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-294.70, -52.83, 6.7) and (-294.71, -56.00, 2.2) checkLTHo : distance = 3.174, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-294.70, -52.83, 6.7) checkLTHo : collision between LIGHT_TRAPs (37.78, -30.93, 7.8) and (40.22, -30.36, 8.5) checkLTHo : distance = 2.500, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(40.22, -30.36, 8.5) makePlates : making a plate from ./plPlugMapT-9357.par makePlates : plateInfo struct for plate 1246 : (h4).mjd 52691 (h4).raCen 86.11896 (h4).decCen -0.02660945 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 86.119 -0.027 86.119 1.473 plMakePlateFromTile : mjd of obs : 52691.495396 Observed HA/dec of plate center, fiducial point (deg) : -11.002 -0.015 -11.003 1.484 The rotation angle of the fid. point is 16.519865 plMakePlateFromTile : beginning loop over 1759 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9358.par makePlates : plateInfo struct for plate 1247 : (h4).mjd 52691 (h4).raCen 87.80636 (h4).decCen 0.04911001 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 87.806 0.049 87.806 1.549 plMakePlateFromTile : mjd of obs : 52691.497300 Observed HA/dec of plate center, fiducial point (deg) : -12.002 0.060 -12.003 1.560 The rotation angle of the fid. point is 17.941661 plMakePlateFromTile : beginning loop over 2528 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-9359.par makePlates : plateInfo struct for plate 1248 : (h4).mjd 52691 (h4).raCen 89.78226 (h4).decCen 0.01975301 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 89.782 0.020 89.782 1.520 plMakePlateFromTile : mjd of obs : 52691.494461 Observed HA/dec of plate center, fiducial point (deg) : -15.002 0.030 -15.003 1.530 The rotation angle of the fid. point is 21.933834 plMakePlateFromTile : beginning loop over 2929 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-90.80, 82.64, 8.0) and (-91.67, 79.35, 8.3) checkLTHo : distance = 3.410, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-91.67, 79.35, 8.3) makePlates : making a plate from ./plPlugMapT-9360.par makePlates : plateInfo struct for plate 1249 : (h4).mjd 52691 (h4).raCen 91.99178 (h4).decCen 0.01334723 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 91.992 0.013 91.992 1.513 plMakePlateFromTile : mjd of obs : 52691.495040 Observed HA/dec of plate center, fiducial point (deg) : -17.002 0.023 -17.003 1.523 The rotation angle of the fid. point is 24.454515 plMakePlateFromTile : beginning loop over 1837 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Jan 14 20:08:36 CST 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_158/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_158/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 8 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1242.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 114 2 4 72 3 9 57 4 23 107 5 10 139 6 4 78 7 4 75 8 5 103 9 4 98 10 14 117 11 14 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 20 1 497 34 plFiberPlate : adding spectro-photo std with objId = 3325 20 2 499 118 plFiberPlate : adding spectro-photo std with objId = 3325 20 6 497 56 plFiberPlate : adding spectro-photo std with objId = 3325 20 6 497 17 plFiberPlate : adding spectro-photo std with objId = 2738 20 2 309 57 plFiberPlate : adding spectro-photo std with objId = 3325 20 3 497 6 plFiberPlate : adding spectro-photo std with objId = 3325 20 4 492 42 plFiberPlate : adding spectro-photo std with objId = 2738 20 4 304 82 plFiberPlate : 78 possible sky positions to use as objects from a possible 553. plFiberPlate : 47 possible sky positions to use as objects from a possible 552. plFiberPlate : 31 possible sky positions to use as objects from a possible 551. plFiberPlate : 34 possible sky positions to use as objects from a possible 550. plFiberPlate : 26 possible sky positions to use as objects from a possible 549. plFiberPlate : 19 possible sky positions to use as objects from a possible 548. plFiberPlate : 36 possible sky positions to use as objects from a possible 547. plFiberPlate : 46 possible sky positions to use as objects from a possible 546. plFiberPlate : 34 possible sky positions to use as objects from a possible 545. plFiberPlate : 21 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 10 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 37 possible sky positions to use as objects from a possible 538. plFiberPlate : 56 possible sky positions to use as objects from a possible 537. plFiberPlate : 42 possible sky positions to use as objects from a possible 536. plFiberPlate : 25 possible sky positions to use as objects from a possible 535. plFiberPlate : 16 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 9 possible sky positions to use as objects from a possible 532. plFiberPlate : 5 possible sky positions to use as objects from a possible 531. plFiberPlate : 6 possible sky positions to use as objects from a possible 530. plFiberPlate : 5 possible sky positions to use as objects from a possible 529. plFiberPlate : 27 possible sky positions to use as objects from a possible 528. plFiberPlate : 20 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 4 possible sky positions to use as objects from a possible 522. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1242.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1242.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1243.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 272 to list of science objects plFiberPlate : adding sky number 92 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 281 to list of science objects plFiberPlate : adding sky number 498 to list of science objects plFiberPlate : adding sky number 90 to list of science objects plFiberPlate : adding sky number 367 to list of science objects plFiberPlate : adding sky number 118 to list of science objects plFiberPlate : adding sky number 258 to list of science objects plFiberPlate : adding sky number 64 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 143 to list of science objects plFiberPlate : adding sky number 190 to list of science objects plFiberPlate : adding sky number 507 to list of science objects plFiberPlate : adding sky number 275 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 103 2 3 66 3 7 51 4 20 100 5 5 132 6 3 75 7 4 65 8 5 93 9 4 92 10 12 109 11 12 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 20 2 499 118 plFiberPlate : adding spectro-photo std with objId = 3325 20 6 497 17 plFiberPlate : adding spectro-photo std with objId = 3325 20 2 496 125 plFiberPlate : adding spectro-photo std with objId = 2738 20 2 309 57 plFiberPlate : adding spectro-photo std with objId = 2738 20 5 308 29 plFiberPlate : adding spectro-photo std with objId = 3325 20 3 497 6 plFiberPlate : adding spectro-photo std with objId = 3325 20 4 492 42 plFiberPlate : adding spectro-photo std with objId = 2738 20 4 304 82 plFiberPlate : 92 possible sky positions to use as objects from a possible 514. plFiberPlate : 59 possible sky positions to use as objects from a possible 513. plFiberPlate : 29 possible sky positions to use as objects from a possible 512. plFiberPlate : 26 possible sky positions to use as objects from a possible 511. plFiberPlate : 22 possible sky positions to use as objects from a possible 510. plFiberPlate : 27 possible sky positions to use as objects from a possible 509. plFiberPlate : 34 possible sky positions to use as objects from a possible 508. plFiberPlate : 70 possible sky positions to use as objects from a possible 507. plFiberPlate : 39 possible sky positions to use as objects from a possible 506. plFiberPlate : 29 possible sky positions to use as objects from a possible 505. plFiberPlate : 15 possible sky positions to use as objects from a possible 504. plFiberPlate : 14 possible sky positions to use as objects from a possible 503. plFiberPlate : 16 possible sky positions to use as objects from a possible 502. plFiberPlate : 22 possible sky positions to use as objects from a possible 501. plFiberPlate : 11 possible sky positions to use as objects from a possible 500. plFiberPlate : 7 possible sky positions to use as objects from a possible 499. plFiberPlate : 90 possible sky positions to use as objects from a possible 498. plFiberPlate : 55 possible sky positions to use as objects from a possible 497. plFiberPlate : 33 possible sky positions to use as objects from a possible 496. plFiberPlate : 21 possible sky positions to use as objects from a possible 495. plFiberPlate : 20 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 10 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : 19 possible sky positions to use as objects from a possible 490. plFiberPlate : 48 possible sky positions to use as objects from a possible 489. plFiberPlate : 28 possible sky positions to use as objects from a possible 488. plFiberPlate : 20 possible sky positions to use as objects from a possible 487. plFiberPlate : 12 possible sky positions to use as objects from a possible 486. plFiberPlate : 7 possible sky positions to use as objects from a possible 485. plFiberPlate : 9 possible sky positions to use as objects from a possible 484. plFiberPlate : 17 possible sky positions to use as objects from a possible 483. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1242.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1243.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1243.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1244.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 83 2 12 53 3 18 42 4 12 42 5 12 55 6 13 53 7 9 55 8 8 84 9 10 95 10 33 93 11 15 68 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2960 20 4 57 534 plFiberPlate : adding spectro-photo std with objId = 2968 20 2 21 244 plFiberPlate : adding spectro-photo std with objId = 2968 20 5 25 272 plFiberPlate : adding spectro-photo std with objId = 2960 20 3 46 368 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 51 569 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 51 423 plFiberPlate : adding spectro-photo std with objId = 2968 20 6 16 36 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 52 577 plFiberPlate : 61 possible sky positions to use as objects from a possible 348. plFiberPlate : 28 possible sky positions to use as objects from a possible 347. plFiberPlate : 15 possible sky positions to use as objects from a possible 346. plFiberPlate : 14 possible sky positions to use as objects from a possible 345. plFiberPlate : 5 possible sky positions to use as objects from a possible 344. plFiberPlate : 19 possible sky positions to use as objects from a possible 343. plFiberPlate : 35 possible sky positions to use as objects from a possible 342. plFiberPlate : 39 possible sky positions to use as objects from a possible 341. plFiberPlate : 26 possible sky positions to use as objects from a possible 340. plFiberPlate : 12 possible sky positions to use as objects from a possible 339. plFiberPlate : 12 possible sky positions to use as objects from a possible 338. plFiberPlate : 5 possible sky positions to use as objects from a possible 337. plFiberPlate : 2 possible sky positions to use as objects from a possible 336. plFiberPlate : 8 possible sky positions to use as objects from a possible 335. plFiberPlate : 21 possible sky positions to use as objects from a possible 334. plFiberPlate : 13 possible sky positions to use as objects from a possible 333. plFiberPlate : 49 possible sky positions to use as objects from a possible 332. plFiberPlate : 34 possible sky positions to use as objects from a possible 331. plFiberPlate : 26 possible sky positions to use as objects from a possible 330. plFiberPlate : 18 possible sky positions to use as objects from a possible 329. plFiberPlate : 20 possible sky positions to use as objects from a possible 328. plFiberPlate : 7 possible sky positions to use as objects from a possible 327. plFiberPlate : 18 possible sky positions to use as objects from a possible 326. plFiberPlate : 26 possible sky positions to use as objects from a possible 325. plFiberPlate : 15 possible sky positions to use as objects from a possible 324. plFiberPlate : 24 possible sky positions to use as objects from a possible 323. plFiberPlate : 22 possible sky positions to use as objects from a possible 322. plFiberPlate : 16 possible sky positions to use as objects from a possible 321. plFiberPlate : 10 possible sky positions to use as objects from a possible 320. plFiberPlate : 9 possible sky positions to use as objects from a possible 319. plFiberPlate : 5 possible sky positions to use as objects from a possible 318. plFiberPlate : 12 possible sky positions to use as objects from a possible 317. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 705 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1243.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1244.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1244.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1245.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 102 2 12 57 3 9 43 4 11 75 5 6 98 6 6 59 7 4 45 8 9 72 9 3 70 10 14 108 11 15 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2968 20 2 29 500 plFiberPlate : adding spectro-photo std with objId = 2968 20 3 32 573 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 68 451 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 68 106 plFiberPlate : adding spectro-photo std with objId = 2960 20 4 66 547 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 62 109 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 70 274 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 68 156 plFiberPlate : 90 possible sky positions to use as objects from a possible 401. plFiberPlate : 54 possible sky positions to use as objects from a possible 400. plFiberPlate : 30 possible sky positions to use as objects from a possible 399. plFiberPlate : 11 possible sky positions to use as objects from a possible 398. plFiberPlate : 20 possible sky positions to use as objects from a possible 397. plFiberPlate : 36 possible sky positions to use as objects from a possible 396. plFiberPlate : 37 possible sky positions to use as objects from a possible 395. plFiberPlate : 66 possible sky positions to use as objects from a possible 394. plFiberPlate : 55 possible sky positions to use as objects from a possible 393. plFiberPlate : 37 possible sky positions to use as objects from a possible 392. plFiberPlate : 19 possible sky positions to use as objects from a possible 391. plFiberPlate : 11 possible sky positions to use as objects from a possible 390. plFiberPlate : 8 possible sky positions to use as objects from a possible 389. plFiberPlate : 10 possible sky positions to use as objects from a possible 388. plFiberPlate : 18 possible sky positions to use as objects from a possible 387. plFiberPlate : 26 possible sky positions to use as objects from a possible 386. plFiberPlate : 65 possible sky positions to use as objects from a possible 385. plFiberPlate : 35 possible sky positions to use as objects from a possible 384. plFiberPlate : 12 possible sky positions to use as objects from a possible 383. plFiberPlate : 12 possible sky positions to use as objects from a possible 382. plFiberPlate : 9 possible sky positions to use as objects from a possible 381. plFiberPlate : 6 possible sky positions to use as objects from a possible 380. plFiberPlate : 15 possible sky positions to use as objects from a possible 379. plFiberPlate : 14 possible sky positions to use as objects from a possible 378. plFiberPlate : 9 possible sky positions to use as objects from a possible 377. plFiberPlate : 34 possible sky positions to use as objects from a possible 376. plFiberPlate : 23 possible sky positions to use as objects from a possible 375. plFiberPlate : 6 possible sky positions to use as objects from a possible 374. plFiberPlate : 6 possible sky positions to use as objects from a possible 373. plFiberPlate : 8 possible sky positions to use as objects from a possible 372. plFiberPlate : 12 possible sky positions to use as objects from a possible 371. plFiberPlate : 6 possible sky positions to use as objects from a possible 370. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 704 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1244.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1245.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1245.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1246.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 2 86 2 0 56 3 15 50 4 50 83 5 46 80 6 27 40 7 16 35 8 9 68 9 24 58 10 17 104 11 1 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2960 20 1 79 151 plFiberPlate : adding spectro-photo std with objId = 2960 20 1 80 59 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 68 156 plFiberPlate : adding spectro-photo std with objId = 2960 20 3 81 413 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 82 221 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 78 227 plFiberPlate : adding spectro-photo std with objId = 2960 20 4 84 561 plFiberPlate : adding spectro-photo std with objId = 2960 20 4 82 452 plFiberPlate : 79 possible sky positions to use as objects from a possible 369. plFiberPlate : 18 possible sky positions to use as objects from a possible 368. plFiberPlate : 8 possible sky positions to use as objects from a possible 367. plFiberPlate : 7 possible sky positions to use as objects from a possible 366. plFiberPlate : 17 possible sky positions to use as objects from a possible 365. plFiberPlate : 17 possible sky positions to use as objects from a possible 364. plFiberPlate : 45 possible sky positions to use as objects from a possible 363. plFiberPlate : 66 possible sky positions to use as objects from a possible 362. plFiberPlate : 40 possible sky positions to use as objects from a possible 361. plFiberPlate : 14 possible sky positions to use as objects from a possible 360. plFiberPlate : 8 possible sky positions to use as objects from a possible 359. plFiberPlate : 3 possible sky positions to use as objects from a possible 358. plFiberPlate : 14 possible sky positions to use as objects from a possible 357. plFiberPlate : 16 possible sky positions to use as objects from a possible 356. plFiberPlate : 13 possible sky positions to use as objects from a possible 355. plFiberPlate : 12 possible sky positions to use as objects from a possible 354. plFiberPlate : 77 possible sky positions to use as objects from a possible 353. plFiberPlate : 46 possible sky positions to use as objects from a possible 352. plFiberPlate : 19 possible sky positions to use as objects from a possible 351. plFiberPlate : 8 possible sky positions to use as objects from a possible 350. plFiberPlate : 17 possible sky positions to use as objects from a possible 349. plFiberPlate : 17 possible sky positions to use as objects from a possible 348. plFiberPlate : 16 possible sky positions to use as objects from a possible 347. plFiberPlate : 24 possible sky positions to use as objects from a possible 346. plFiberPlate : 1 possible sky positions to use as objects from a possible 345. plFiberPlate : 25 possible sky positions to use as objects from a possible 344. plFiberPlate : 11 possible sky positions to use as objects from a possible 343. plFiberPlate : 8 possible sky positions to use as objects from a possible 342. plFiberPlate : 7 possible sky positions to use as objects from a possible 341. plFiberPlate : 0 possible sky positions to use as objects from a possible 340. plFiberPlate: No sky found for bundle at 76.835 221.665, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 340. plFiberPlate: No sky found for bundle at 76.835 221.665, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 340. plFiberPlate : 12 possible sky positions to use as objects from a possible 339. plFiberPlate : 6 possible sky positions to use as objects from a possible 338. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1245.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1246.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1246.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1247.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 40 2 11 29 3 3 44 4 1 74 5 1 67 6 2 25 7 2 22 8 9 29 9 4 38 10 15 60 11 12 39 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 85 217 plFiberPlate : adding spectro-photo std with objId = 2968 20 6 48 362 plFiberPlate : adding spectro-photo std with objId = 2968 20 4 56 458 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 78 227 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 82 221 plFiberPlate : adding spectro-photo std with objId = 2960 20 4 84 561 plFiberPlate : adding spectro-photo std with objId = 2960 20 3 81 267 plFiberPlate : adding spectro-photo std with objId = 2968 20 3 53 243 plFiberPlate : 74 possible sky positions to use as objects from a possible 243. plFiberPlate : 47 possible sky positions to use as objects from a possible 242. plFiberPlate : 20 possible sky positions to use as objects from a possible 241. plFiberPlate : 10 possible sky positions to use as objects from a possible 240. plFiberPlate : 4 possible sky positions to use as objects from a possible 239. plFiberPlate : 10 possible sky positions to use as objects from a possible 238. plFiberPlate : 20 possible sky positions to use as objects from a possible 237. plFiberPlate : 57 possible sky positions to use as objects from a possible 236. plFiberPlate : 40 possible sky positions to use as objects from a possible 235. plFiberPlate : 31 possible sky positions to use as objects from a possible 234. plFiberPlate : 22 possible sky positions to use as objects from a possible 233. plFiberPlate : 9 possible sky positions to use as objects from a possible 232. plFiberPlate : 6 possible sky positions to use as objects from a possible 231. plFiberPlate : 2 possible sky positions to use as objects from a possible 230. plFiberPlate : 2 possible sky positions to use as objects from a possible 229. plFiberPlate : 22 possible sky positions to use as objects from a possible 228. plFiberPlate : 36 possible sky positions to use as objects from a possible 227. plFiberPlate : 29 possible sky positions to use as objects from a possible 226. plFiberPlate : 20 possible sky positions to use as objects from a possible 225. plFiberPlate : 11 possible sky positions to use as objects from a possible 224. plFiberPlate : 4 possible sky positions to use as objects from a possible 223. plFiberPlate : 2 possible sky positions to use as objects from a possible 222. plFiberPlate : 4 possible sky positions to use as objects from a possible 221. plFiberPlate : 2 possible sky positions to use as objects from a possible 220. plFiberPlate : 14 possible sky positions to use as objects from a possible 219. plFiberPlate : 19 possible sky positions to use as objects from a possible 218. plFiberPlate : 12 possible sky positions to use as objects from a possible 217. plFiberPlate : 7 possible sky positions to use as objects from a possible 216. plFiberPlate : 5 possible sky positions to use as objects from a possible 215. plFiberPlate : 4 possible sky positions to use as objects from a possible 214. plFiberPlate : 10 possible sky positions to use as objects from a possible 213. plFiberPlate : 1 possible sky positions to use as objects from a possible 212. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1246.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1247.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1247.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1248.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 25 2 22 26 3 15 24 4 11 27 5 5 21 6 3 13 7 7 9 8 12 13 9 5 12 10 31 41 11 23 20 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 96 551 plFiberPlate : adding spectro-photo std with objId = 2968 20 2 72 760 plFiberPlate : adding spectro-photo std with objId = 2960 20 1 104 499 plFiberPlate : adding spectro-photo std with objId = 2968 20 5 63 461 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 104 849 plFiberPlate : adding spectro-photo std with objId = 2968 20 3 60 567 plFiberPlate : adding spectro-photo std with objId = 2960 20 4 102 644 plFiberPlate : adding spectro-photo std with objId = 2968 20 4 65 686 plFiberPlate : 30 possible sky positions to use as objects from a possible 110. plFiberPlate : 25 possible sky positions to use as objects from a possible 109. plFiberPlate : 20 possible sky positions to use as objects from a possible 108. plFiberPlate : 9 possible sky positions to use as objects from a possible 107. plFiberPlate : 8 possible sky positions to use as objects from a possible 106. plFiberPlate : 8 possible sky positions to use as objects from a possible 105. plFiberPlate : 7 possible sky positions to use as objects from a possible 104. plFiberPlate : 19 possible sky positions to use as objects from a possible 103. plFiberPlate : 14 possible sky positions to use as objects from a possible 102. plFiberPlate : 10 possible sky positions to use as objects from a possible 101. plFiberPlate : 8 possible sky positions to use as objects from a possible 100. plFiberPlate : 5 possible sky positions to use as objects from a possible 99. plFiberPlate : 0 possible sky positions to use as objects from a possible 98. plFiberPlate: No sky found for bundle at 14.020 -80.406, increase box by 10 percent. plFiberPlate : 3 possible sky positions to use as objects from a possible 98. plFiberPlate : 1 possible sky positions to use as objects from a possible 97. plFiberPlate : 3 possible sky positions to use as objects from a possible 96. plFiberPlate : 6 possible sky positions to use as objects from a possible 95. plFiberPlate : 15 possible sky positions to use as objects from a possible 94. plFiberPlate : 10 possible sky positions to use as objects from a possible 93. plFiberPlate : 7 possible sky positions to use as objects from a possible 92. plFiberPlate : 4 possible sky positions to use as objects from a possible 91. plFiberPlate : 2 possible sky positions to use as objects from a possible 90. plFiberPlate : 0 possible sky positions to use as objects from a possible 89. plFiberPlate: No sky found for bundle at 5.049 71.198, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 89. plFiberPlate: No sky found for bundle at 5.049 71.198, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 89. plFiberPlate: No sky found for bundle at 5.049 71.198, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 89. plFiberPlate: No sky found for bundle at 5.049 71.198, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 89. plFiberPlate: No sky found for bundle at 5.049 71.198, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 89. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 88. plFiberPlate: No sky found for bundle at 50.799 91.293, increase box by 90 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 88. plFiberPlate : 1 possible sky positions to use as objects from a possible 87. plFiberPlate : 7 possible sky positions to use as objects from a possible 86. plFiberPlate : 4 possible sky positions to use as objects from a possible 85. plFiberPlate : 2 possible sky positions to use as objects from a possible 84. plFiberPlate : 1 possible sky positions to use as objects from a possible 83. plFiberPlate : 0 possible sky positions to use as objects from a possible 82. plFiberPlate: No sky found for bundle at -17.680 194.716, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 82. plFiberPlate : 2 possible sky positions to use as objects from a possible 81. plFiberPlate : 0 possible sky positions to use as objects from a possible 80. plFiberPlate: No sky found for bundle at 127.277 196.348, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 80. plFiberPlate: No sky found for bundle at 127.277 196.348, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 80. plFiberPlate: No sky found for bundle at 127.277 196.348, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 80. plFiberPlate : 1 possible sky positions to use as objects from a possible 79. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 684 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1247.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1248.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1248.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.01.4/plPlugMapP-1249.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 13 2 21 12 3 21 11 4 22 15 5 24 16 6 19 13 7 22 9 8 24 4 9 29 16 10 50 24 11 38 17 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 105 931 plFiberPlate : adding spectro-photo std with objId = 2968 20 4 72 652 plFiberPlate : adding spectro-photo std with objId = 2960 20 2 107 254 plFiberPlate : adding spectro-photo std with objId = 2960 20 4 108 655 plFiberPlate : adding spectro-photo std with objId = 2960 20 3 119 1555 plFiberPlate : adding spectro-photo std with objId = 2968 20 2 72 760 plFiberPlate : adding spectro-photo std with objId = 2960 20 6 106 314 plFiberPlate : adding spectro-photo std with objId = 2968 20 6 84 63 plFiberPlate : 13 possible sky positions to use as objects from a possible 67. plFiberPlate : 13 possible sky positions to use as objects from a possible 66. plFiberPlate : 7 possible sky positions to use as objects from a possible 65. plFiberPlate : 4 possible sky positions to use as objects from a possible 64. plFiberPlate : 4 possible sky positions to use as objects from a possible 63. plFiberPlate : 7 possible sky positions to use as objects from a possible 62. plFiberPlate : 3 possible sky positions to use as objects from a possible 61. plFiberPlate : 9 possible sky positions to use as objects from a possible 60. plFiberPlate : 9 possible sky positions to use as objects from a possible 59. plFiberPlate : 6 possible sky positions to use as objects from a possible 58. plFiberPlate : 5 possible sky positions to use as objects from a possible 57. plFiberPlate : 2 possible sky positions to use as objects from a possible 56. plFiberPlate : 3 possible sky positions to use as objects from a possible 55. plFiberPlate : 1 possible sky positions to use as objects from a possible 54. plFiberPlate : 3 possible sky positions to use as objects from a possible 53. plFiberPlate : 1 possible sky positions to use as objects from a possible 52. plFiberPlate : 12 possible sky positions to use as objects from a possible 51. plFiberPlate : 9 possible sky positions to use as objects from a possible 50. plFiberPlate : 9 possible sky positions to use as objects from a possible 49. plFiberPlate : 7 possible sky positions to use as objects from a possible 48. plFiberPlate : 1 possible sky positions to use as objects from a possible 47. plFiberPlate : 1 possible sky positions to use as objects from a possible 46. plFiberPlate : 0 possible sky positions to use as objects from a possible 45. plFiberPlate: No sky found for bundle at 103.846 71.402, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 45. plFiberPlate: No sky found for bundle at 103.846 71.402, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 45. plFiberPlate: No sky found for bundle at 103.846 71.402, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 45. plFiberPlate: No sky found for bundle at 103.846 71.402, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 45. plFiberPlate : 0 possible sky positions to use as objects from a possible 44. plFiberPlate: No sky found for bundle at 163.532 65.487, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 44. plFiberPlate: No sky found for bundle at 163.532 65.487, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 44. plFiberPlate: No sky found for bundle at 163.532 65.487, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 44. plFiberPlate: No sky found for bundle at 163.532 65.487, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 44. plFiberPlate: No sky found for bundle at 163.532 65.487, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 44. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 110 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 120 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 130 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 140 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 150 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 160 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 170 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 180 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 43. plFiberPlate: No sky found for bundle at 211.041 67.077, increase box by 190 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 43. plFiberPlate : 9 possible sky positions to use as objects from a possible 42. plFiberPlate : 7 possible sky positions to use as objects from a possible 41. plFiberPlate : 7 possible sky positions to use as objects from a possible 40. plFiberPlate : 3 possible sky positions to use as objects from a possible 39. plFiberPlate : 1 possible sky positions to use as objects from a possible 38. plFiberPlate : 2 possible sky positions to use as objects from a possible 37. plFiberPlate : 1 possible sky positions to use as objects from a possible 36. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1248.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1249.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.01.4/plOverlay-1249.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Jan 14 20:09:07 CST 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_158/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_158/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 8 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1242.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1242.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1242.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1243.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1243.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1243.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 43 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1244.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1244.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1244.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 42 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1245.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.6611,8.3128) and (10.64,6.92) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1245.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1245.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1246.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.8054,-8.1759) and (11.46,-5.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1246.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1246.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1247.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2421,2.8834) and (-12.66,1.82) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1247.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1247.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 22 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1248.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1248.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1248.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1249.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1249.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.4708,-9.8553) and (0.56,-12.26) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.01.4/plFanuc-1249.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Jan 14 20:09:32 CST 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_158/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_158/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e44668 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 8 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1242 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1243 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1244 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 705 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1245 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 704 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1246 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1247 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1248 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 684 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1249 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Jan 14 20:09:45 CST 2003 Begin running plateEnder dr2003.01.4 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_158/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_158/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.01.4 -morePipes 1 failed. PS: Read file for stderr output of this job.