Sender: LSF System Subject: Job 69078: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Jul 2 13:41:13 2003 Results reported at Wed Jul 2 13:53:07 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_343 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.07.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 665.72 sec. Max Memory : 11 MB Max Swap : 34 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Jul 2 13:41:15 CDT 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Jul 2 13:41:17 CDT 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v2_2/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_11_5OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_7/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_4_24/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_343/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_17/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_16/OSF1/bin:/sdss/ups/prd/sdssmath/v5_12/OSF1/bin:/sdss/ups/prd/astrotools/v5_14/OSF1/bin:/sdss/ups/prd/plate/v3_8/OSF1/bin --------------------------------------------------------------- Wed Jul 2 13:41:17 CDT 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_11_5OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_343/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_16/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_2/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_24/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_8/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Wed Jul 2 13:41:17 CDT 2003 Begin running plate --------------------------------------------------------------- Wed Jul 2 13:41:17 CDT 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140ec1be8 makePlates : beginning loop over plObs chain; makePlates : making 42 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1025.par makePlates : plateInfo struct for plate 1426 : (h4).mjd 53055 (h4).raCen 152.0916 (h4).decCen 37.53274 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.092 37.533 152.092 39.033 plMakePlateFromTile : mjd of obs : 53055.623423 Observed HA/dec of plate center, fiducial point (deg) : -32.002 37.512 -32.003 39.012 The rotation angle of the fid. point is 90.616992 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1026.par makePlates : plateInfo struct for plate 1427 : (h4).mjd 53055 (h4).raCen 154.6201 (h4).decCen 38.35656 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.620 38.357 154.620 39.857 plMakePlateFromTile : mjd of obs : 53055.624884 Observed HA/dec of plate center, fiducial point (deg) : -34.002 38.336 -34.003 39.835 The rotation angle of the fid. point is 90.942771 plMakePlateFromTile : beginning loop over 1264 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1027.par makePlates : plateInfo struct for plate 1428 : (h4).mjd 53055 (h4).raCen 156.3404 (h4).decCen 39.0004 (h4).haCen -36 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 156.340 39.000 156.340 40.500 plMakePlateFromTile : mjd of obs : 53055.624106 Observed HA/dec of plate center, fiducial point (deg) : -36.002 38.979 -36.003 40.479 The rotation angle of the fid. point is 90.817612 plMakePlateFromTile : beginning loop over 1277 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1005.par makePlates : plateInfo struct for plate 1429 : (h4).mjd 53055 (h4).raCen 157.5122 (h4).decCen 44.09519 (h4).haCen -37 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.512 44.095 157.512 45.595 plMakePlateFromTile : mjd of obs : 53055.624583 Observed HA/dec of plate center, fiducial point (deg) : -37.002 44.072 -37.003 45.572 The rotation angle of the fid. point is 98.776308 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-315.80, -37.53, 8.2) and (-316.13, -38.00, 8.5) checkLTHo : distance = 0.576, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-316.13, -38.00, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1028.par makePlates : plateInfo struct for plate 1430 : (h4).mjd 53055 (h4).raCen 158.2345 (h4).decCen 39.29745 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 158.235 39.297 158.235 40.797 plMakePlateFromTile : mjd of obs : 53055.665378 Observed HA/dec of plate center, fiducial point (deg) : -23.002 39.274 -23.003 40.774 The rotation angle of the fid. point is 102.171620 plMakePlateFromTile : beginning loop over 1249 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1006.par makePlates : plateInfo struct for plate 1431 : (h4).mjd 53055 (h4).raCen 159.6815 (h4).decCen 44.57822 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.681 44.578 159.681 46.078 plMakePlateFromTile : mjd of obs : 53055.666617 Observed HA/dec of plate center, fiducial point (deg) : -24.002 44.553 -24.003 46.053 The rotation angle of the fid. point is 114.119062 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1029.par makePlates : plateInfo struct for plate 1432 : (h4).mjd 53055 (h4).raCen 159.8061 (h4).decCen 39.72455 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.806 39.725 159.806 41.225 plMakePlateFromTile : mjd of obs : 53055.666959 Observed HA/dec of plate center, fiducial point (deg) : -24.002 39.701 -24.003 41.201 The rotation angle of the fid. point is 102.230594 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1030.par makePlates : plateInfo struct for plate 1433 : (h4).mjd 53055 (h4).raCen 161.4728 (h4).decCen 40.09676 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.473 40.097 161.473 41.597 plMakePlateFromTile : mjd of obs : 53055.666032 Observed HA/dec of plate center, fiducial point (deg) : -26.002 40.073 -26.003 41.573 The rotation angle of the fid. point is 101.086274 plMakePlateFromTile : beginning loop over 1270 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1007.par makePlates : plateInfo struct for plate 1434 : (h4).mjd 53055 (h4).raCen 162.2488 (h4).decCen 45.19404 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.249 45.194 162.249 46.694 plMakePlateFromTile : mjd of obs : 53055.706982 Observed HA/dec of plate center, fiducial point (deg) : -12.002 45.168 -12.003 46.667 The rotation angle of the fid. point is 139.066005 plMakePlateFromTile : beginning loop over 1332 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1031.par makePlates : plateInfo struct for plate 1435 : (h4).mjd 53055 (h4).raCen 163.9694 (h4).decCen 40.57648 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.969 40.576 163.969 42.076 plMakePlateFromTile : mjd of obs : 53055.708972 Observed HA/dec of plate center, fiducial point (deg) : -13.002 40.551 -13.003 42.051 The rotation angle of the fid. point is 122.662269 plMakePlateFromTile : beginning loop over 1289 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1008.par makePlates : plateInfo struct for plate 1436 : (h4).mjd 53055 (h4).raCen 165.2225 (h4).decCen 45.78317 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.222 45.783 165.222 47.283 plMakePlateFromTile : mjd of obs : 53055.706903 Observed HA/dec of plate center, fiducial point (deg) : -15.002 45.756 -15.003 47.256 The rotation angle of the fid. point is 133.161977 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1032.par makePlates : plateInfo struct for plate 1437 : (h4).mjd 53055 (h4).raCen 166.3001 (h4).decCen 40.9817 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.300 40.982 166.300 42.482 plMakePlateFromTile : mjd of obs : 53055.707113 Observed HA/dec of plate center, fiducial point (deg) : -16.002 40.956 -16.003 42.456 The rotation angle of the fid. point is 117.550660 plMakePlateFromTile : beginning loop over 1288 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1009.par makePlates : plateInfo struct for plate 1438 : (h4).mjd 53055 (h4).raCen 167.9269 (h4).decCen 46.23163 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.927 46.232 167.927 47.732 plMakePlateFromTile : mjd of obs : 53055.708850 Observed HA/dec of plate center, fiducial point (deg) : -17.002 46.204 -17.003 47.704 The rotation angle of the fid. point is 129.919987 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1033.par makePlates : plateInfo struct for plate 1439 : (h4).mjd 53055 (h4).raCen 168.0577 (h4).decCen 41.39097 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.058 41.391 168.058 42.891 plMakePlateFromTile : mjd of obs : 53055.706438 Observed HA/dec of plate center, fiducial point (deg) : -18.002 41.365 -18.003 42.865 The rotation angle of the fid. point is 115.173857 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (58.90, -65.61, 6.5) and (59.07, -65.45, 8.4) checkLTHo : distance = 0.224, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(59.07, -65.45, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1034.par makePlates : plateInfo struct for plate 1440 : (h4).mjd 53055 (h4).raCen 170.322 (h4).decCen 41.44585 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.322 41.446 170.322 42.946 plMakePlateFromTile : mjd of obs : 53055.707166 Observed HA/dec of plate center, fiducial point (deg) : -20.002 41.420 -20.003 42.919 The rotation angle of the fid. point is 112.088602 plMakePlateFromTile : beginning loop over 1247 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-313.13, -74.43, 6.5) and (-312.96, -74.28, 8.4) checkLTHo : distance = 0.226, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-312.96, -74.28, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1010.par makePlates : plateInfo struct for plate 1441 : (h4).mjd 53055 (h4).raCen 170.417 (h4).decCen 46.58606 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.417 46.586 170.417 48.086 plMakePlateFromTile : mjd of obs : 53055.707431 Observed HA/dec of plate center, fiducial point (deg) : -20.002 46.558 -20.003 48.058 The rotation angle of the fid. point is 125.003321 plMakePlateFromTile : beginning loop over 1305 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1011.par makePlates : plateInfo struct for plate 1442 : (h4).mjd 53055 (h4).raCen 172.8769 (h4).decCen 46.87752 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.877 46.878 172.877 48.378 plMakePlateFromTile : mjd of obs : 53055.750269 Observed HA/dec of plate center, fiducial point (deg) : -7.002 46.849 -7.003 48.348 The rotation angle of the fid. point is 156.755322 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1035.par makePlates : plateInfo struct for plate 1443 : (h4).mjd 53055 (h4).raCen 172.9564 (h4).decCen 41.78305 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.956 41.783 172.956 43.283 plMakePlateFromTile : mjd of obs : 53055.750486 Observed HA/dec of plate center, fiducial point (deg) : -7.002 41.756 -7.003 43.255 The rotation angle of the fid. point is 145.989482 plMakePlateFromTile : beginning loop over 1245 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1012.par makePlates : plateInfo struct for plate 1444 : (h4).mjd 53055 (h4).raCen 175.5428 (h4).decCen 47.1696 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.543 47.170 175.543 48.670 plMakePlateFromTile : mjd of obs : 53055.749337 Observed HA/dec of plate center, fiducial point (deg) : -10.002 47.141 -10.003 48.640 The rotation angle of the fid. point is 148.545732 plMakePlateFromTile : beginning loop over 1327 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1036.par makePlates : plateInfo struct for plate 1445 : (h4).mjd 53055 (h4).raCen 175.9474 (h4).decCen 42.14272 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.947 42.143 175.947 43.643 plMakePlateFromTile : mjd of obs : 53055.750455 Observed HA/dec of plate center, fiducial point (deg) : -10.002 42.115 -10.003 43.615 The rotation angle of the fid. point is 136.461802 plMakePlateFromTile : beginning loop over 1287 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1013.par makePlates : plateInfo struct for plate 1446 : (h4).mjd 53055 (h4).raCen 178.6044 (h4).decCen 47.49988 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.604 47.500 178.604 49.000 plMakePlateFromTile : mjd of obs : 53055.749501 Observed HA/dec of plate center, fiducial point (deg) : -13.002 47.470 -13.002 48.970 The rotation angle of the fid. point is 141.493135 plMakePlateFromTile : beginning loop over 1331 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (28.89, -224.30, 7.0) and (25.59, -222.59, 8.3) checkLTHo : distance = 3.723, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(25.59, -222.59, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1037.par makePlates : plateInfo struct for plate 1447 : (h4).mjd 53055 (h4).raCen 178.6931 (h4).decCen 42.33295 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.693 42.333 178.693 43.833 plMakePlateFromTile : mjd of obs : 53055.788541 Observed HA/dec of plate center, fiducial point (deg) : 0.998 42.305 0.997 43.804 The rotation angle of the fid. point is -174.934169 plMakePlateFromTile : beginning loop over 1267 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1038.par makePlates : plateInfo struct for plate 1448 : (h4).mjd 53055 (h4).raCen 181.0878 (h4).decCen 42.40453 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.088 42.405 181.088 43.905 plMakePlateFromTile : mjd of obs : 53055.789630 Observed HA/dec of plate center, fiducial point (deg) : -1.002 42.376 -1.003 43.876 The rotation angle of the fid. point is 174.961598 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1014.par makePlates : plateInfo struct for plate 1449 : (h4).mjd 53055 (h4).raCen 181.6324 (h4).decCen 47.49381 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.632 47.494 181.632 48.994 plMakePlateFromTile : mjd of obs : 53055.791140 Observed HA/dec of plate center, fiducial point (deg) : -1.002 47.464 -1.003 48.963 The rotation angle of the fid. point is 176.684863 plMakePlateFromTile : beginning loop over 1317 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1039.par makePlates : plateInfo struct for plate 1450 : (h4).mjd 53055 (h4).raCen 183.594 (h4).decCen 42.46246 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.594 42.462 183.594 43.962 plMakePlateFromTile : mjd of obs : 53055.791027 Observed HA/dec of plate center, fiducial point (deg) : -3.002 42.434 -3.003 43.934 The rotation angle of the fid. point is 165.225525 plMakePlateFromTile : beginning loop over 1279 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1015.par makePlates : plateInfo struct for plate 1451 : (h4).mjd 53055 (h4).raCen 184.7167 (h4).decCen 47.51899 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.717 47.519 184.717 49.019 plMakePlateFromTile : mjd of obs : 53055.791366 Observed HA/dec of plate center, fiducial point (deg) : -4.002 47.489 -4.002 48.988 The rotation angle of the fid. point is 166.915078 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1040.par makePlates : plateInfo struct for plate 1452 : (h4).mjd 53055 (h4).raCen 186.4134 (h4).decCen 42.39875 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.413 42.399 186.413 43.899 plMakePlateFromTile : mjd of obs : 53055.790521 Observed HA/dec of plate center, fiducial point (deg) : -6.002 42.370 -6.002 43.870 The rotation angle of the fid. point is 151.733519 plMakePlateFromTile : beginning loop over 1282 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1016.par makePlates : plateInfo struct for plate 1453 : (h4).mjd 53055 (h4).raCen 187.7963 (h4).decCen 47.55695 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 187.796 47.557 187.796 49.057 plMakePlateFromTile : mjd of obs : 53055.791579 Observed HA/dec of plate center, fiducial point (deg) : -7.002 47.527 -7.002 49.026 The rotation angle of the fid. point is 157.701679 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1041.par makePlates : plateInfo struct for plate 1454 : (h4).mjd 53055 (h4).raCen 189.1433 (h4).decCen 42.34185 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.143 42.342 189.143 43.842 plMakePlateFromTile : mjd of obs : 53055.789766 Observed HA/dec of plate center, fiducial point (deg) : -9.002 42.313 -9.002 43.813 The rotation angle of the fid. point is 140.333237 plMakePlateFromTile : beginning loop over 1255 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1017.par makePlates : plateInfo struct for plate 1455 : (h4).mjd 53055 (h4).raCen 190.9837 (h4).decCen 47.3513 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.984 47.351 190.984 48.851 plMakePlateFromTile : mjd of obs : 53055.792090 Observed HA/dec of plate center, fiducial point (deg) : -10.002 47.321 -10.002 48.821 The rotation angle of the fid. point is 148.856490 plMakePlateFromTile : beginning loop over 1342 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1042.par makePlates : plateInfo struct for plate 1456 : (h4).mjd 53055 (h4).raCen 191.9278 (h4).decCen 42.33019 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.928 42.330 191.928 43.830 plMakePlateFromTile : mjd of obs : 53055.830730 Observed HA/dec of plate center, fiducial point (deg) : 2.998 42.302 2.998 43.801 The rotation angle of the fid. point is -165.047808 plMakePlateFromTile : beginning loop over 1298 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1018.par makePlates : plateInfo struct for plate 1457 : (h4).mjd 53055 (h4).raCen 193.8574 (h4).decCen 47.15632 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.857 47.156 193.857 48.656 plMakePlateFromTile : mjd of obs : 53055.830531 Observed HA/dec of plate center, fiducial point (deg) : 0.998 47.126 0.998 48.626 The rotation angle of the fid. point is -176.617969 plMakePlateFromTile : beginning loop over 1343 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1043.par makePlates : plateInfo struct for plate 1458 : (h4).mjd 53055 (h4).raCen 194.9211 (h4).decCen 41.8824 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 194.921 41.882 194.921 43.382 plMakePlateFromTile : mjd of obs : 53055.830705 Observed HA/dec of plate center, fiducial point (deg) : -0.002 41.854 -0.002 43.353 The rotation angle of the fid. point is 179.985808 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1019.par makePlates : plateInfo struct for plate 1459 : (h4).mjd 53055 (h4).raCen 196.7035 (h4).decCen 46.92125 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.703 46.921 196.703 48.421 plMakePlateFromTile : mjd of obs : 53055.832869 Observed HA/dec of plate center, fiducial point (deg) : -1.002 46.891 -1.002 48.391 The rotation angle of the fid. point is 176.543694 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1044.par makePlates : plateInfo struct for plate 1460 : (h4).mjd 53055 (h4).raCen 198.0149 (h4).decCen 41.71816 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.015 41.718 198.015 43.218 plMakePlateFromTile : mjd of obs : 53055.830959 Observed HA/dec of plate center, fiducial point (deg) : -3.002 41.690 -3.002 43.189 The rotation angle of the fid. point is 164.049409 plMakePlateFromTile : beginning loop over 1280 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1020.par makePlates : plateInfo struct for plate 1461 : (h4).mjd 53055 (h4).raCen 199.3673 (h4).decCen 46.63806 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.367 46.638 199.367 48.138 plMakePlateFromTile : mjd of obs : 53055.870728 Observed HA/dec of plate center, fiducial point (deg) : 9.998 46.608 9.998 48.108 The rotation angle of the fid. point is -147.571418 plMakePlateFromTile : beginning loop over 1312 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1045.par makePlates : plateInfo struct for plate 1462 : (h4).mjd 53055 (h4).raCen 200.6563 (h4).decCen 41.34973 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.656 41.350 200.656 42.850 plMakePlateFromTile : mjd of obs : 53055.871526 Observed HA/dec of plate center, fiducial point (deg) : 8.998 41.322 8.998 42.821 The rotation angle of the fid. point is -137.143793 plMakePlateFromTile : beginning loop over 1283 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1021.par makePlates : plateInfo struct for plate 1463 : (h4).mjd 53055 (h4).raCen 202.3168 (h4).decCen 46.311 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 202.317 46.311 202.317 47.811 plMakePlateFromTile : mjd of obs : 53055.870581 Observed HA/dec of plate center, fiducial point (deg) : 6.998 46.281 6.998 47.781 The rotation angle of the fid. point is -155.900458 plMakePlateFromTile : beginning loop over 1306 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1046.par makePlates : plateInfo struct for plate 1464 : (h4).mjd 53055 (h4).raCen 203.5266 (h4).decCen 40.86954 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.527 40.870 203.527 42.370 plMakePlateFromTile : mjd of obs : 53055.871161 Observed HA/dec of plate center, fiducial point (deg) : 5.998 40.842 5.998 42.341 The rotation angle of the fid. point is -147.380830 plMakePlateFromTile : beginning loop over 1206 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1022.par makePlates : plateInfo struct for plate 1465 : (h4).mjd 53055 (h4).raCen 205.4746 (h4).decCen 45.74791 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.475 45.748 205.475 47.248 plMakePlateFromTile : mjd of obs : 53055.871011 Observed HA/dec of plate center, fiducial point (deg) : 3.998 45.719 3.998 47.218 The rotation angle of the fid. point is -165.244981 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1023.par makePlates : plateInfo struct for plate 1466 : (h4).mjd 53055 (h4).raCen 208.4812 (h4).decCen 45.13463 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 208.481 45.135 208.481 46.635 plMakePlateFromTile : mjd of obs : 53055.871022 Observed HA/dec of plate center, fiducial point (deg) : 0.998 45.106 0.998 46.606 The rotation angle of the fid. point is -176.084761 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk68/complete//plPlugMapT-1024.par makePlates : plateInfo struct for plate 1467 : (h4).mjd 53055 (h4).raCen 211.5462 (h4).decCen 44.40261 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 211.546 44.403 211.546 45.903 plMakePlateFromTile : mjd of obs : 53055.873967 Observed HA/dec of plate center, fiducial point (deg) : -1.002 44.375 -1.002 45.874 The rotation angle of the fid. point is 175.801421 plMakePlateFromTile : beginning loop over 1221 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Jul 2 13:43:32 CDT 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 42 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1426.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 97 2 7 46 3 9 62 4 11 104 5 8 106 6 14 97 7 18 90 8 19 105 9 10 97 10 18 124 11 9 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3647 40 3 93 19 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 125 80 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 99 43 plFiberPlate : adding spectro-photo std with objId = 3704 40 4 137 49 plFiberPlate : adding spectro-photo std with objId = 3704 40 2 129 80 plFiberPlate : adding spectro-photo std with objId = 3704 40 4 140 17 plFiberPlate : adding spectro-photo std with objId = 3704 40 5 141 63 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 91 30 plFiberPlate : 106 possible sky positions to use as objects from a possible 528. plFiberPlate : 68 possible sky positions to use as objects from a possible 527. plFiberPlate : 52 possible sky positions to use as objects from a possible 526. plFiberPlate : 37 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 46 possible sky positions to use as objects from a possible 523. plFiberPlate : 50 possible sky positions to use as objects from a possible 522. plFiberPlate : 71 possible sky positions to use as objects from a possible 521. plFiberPlate : 32 possible sky positions to use as objects from a possible 520. plFiberPlate : 30 possible sky positions to use as objects from a possible 519. plFiberPlate : 18 possible sky positions to use as objects from a possible 518. plFiberPlate : 12 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 21 possible sky positions to use as objects from a possible 514. plFiberPlate : 18 possible sky positions to use as objects from a possible 513. plFiberPlate : 35 possible sky positions to use as objects from a possible 512. plFiberPlate : 20 possible sky positions to use as objects from a possible 511. plFiberPlate : 13 possible sky positions to use as objects from a possible 510. plFiberPlate : 10 possible sky positions to use as objects from a possible 509. plFiberPlate : 3 possible sky positions to use as objects from a possible 508. plFiberPlate : 2 possible sky positions to use as objects from a possible 507. plFiberPlate : 7 possible sky positions to use as objects from a possible 506. plFiberPlate : 5 possible sky positions to use as objects from a possible 505. plFiberPlate : 27 possible sky positions to use as objects from a possible 504. plFiberPlate : 52 possible sky positions to use as objects from a possible 503. plFiberPlate : 40 possible sky positions to use as objects from a possible 502. plFiberPlate : 31 possible sky positions to use as objects from a possible 501. plFiberPlate : 35 possible sky positions to use as objects from a possible 500. plFiberPlate : 11 possible sky positions to use as objects from a possible 499. plFiberPlate : 20 possible sky positions to use as objects from a possible 498. plFiberPlate : 26 possible sky positions to use as objects from a possible 497. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1426.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1426.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1427.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 98 2 7 57 3 5 83 4 11 116 5 16 123 6 3 91 7 5 85 8 13 109 9 6 102 10 13 144 11 10 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3647 40 1 113 53 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 109 55 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 112 102 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 154 64 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 107 2 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 109 83 plFiberPlate : adding spectro-photo std with objId = 3704 40 1 140 123 plFiberPlate : adding spectro-photo std with objId = 3704 40 2 148 54 plFiberPlate : 130 possible sky positions to use as objects from a possible 572. plFiberPlate : 58 possible sky positions to use as objects from a possible 571. plFiberPlate : 26 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 9 possible sky positions to use as objects from a possible 568. plFiberPlate : 24 possible sky positions to use as objects from a possible 567. plFiberPlate : 28 possible sky positions to use as objects from a possible 566. plFiberPlate : 86 possible sky positions to use as objects from a possible 565. plFiberPlate : 33 possible sky positions to use as objects from a possible 564. plFiberPlate : 32 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 6 possible sky positions to use as objects from a possible 560. plFiberPlate : 28 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : 8 possible sky positions to use as objects from a possible 557. plFiberPlate : 57 possible sky positions to use as objects from a possible 556. plFiberPlate : 29 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 16 possible sky positions to use as objects from a possible 553. plFiberPlate : 14 possible sky positions to use as objects from a possible 552. plFiberPlate : 13 possible sky positions to use as objects from a possible 551. plFiberPlate : 10 possible sky positions to use as objects from a possible 550. plFiberPlate : 4 possible sky positions to use as objects from a possible 549. plFiberPlate : 22 possible sky positions to use as objects from a possible 548. plFiberPlate : 65 possible sky positions to use as objects from a possible 547. plFiberPlate : 34 possible sky positions to use as objects from a possible 546. plFiberPlate : 27 possible sky positions to use as objects from a possible 545. plFiberPlate : 4 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 10 possible sky positions to use as objects from a possible 542. plFiberPlate : 23 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1426.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1427.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1427.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1428.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 109 2 3 73 3 4 89 4 8 105 5 9 117 6 11 102 7 13 94 8 9 105 9 21 113 10 16 161 11 8 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 163 40 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 112 102 plFiberPlate : adding spectro-photo std with objId = 3647 40 3 111 124 plFiberPlate : adding spectro-photo std with objId = 3704 40 6 154 64 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 114 39 plFiberPlate : adding spectro-photo std with objId = 3704 40 4 157 2 plFiberPlate : adding spectro-photo std with objId = 3704 40 2 148 54 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 124 29 plFiberPlate : 141 possible sky positions to use as objects from a possible 583. plFiberPlate : 47 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 19 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 29 possible sky positions to use as objects from a possible 577. plFiberPlate : 112 possible sky positions to use as objects from a possible 576. plFiberPlate : 82 possible sky positions to use as objects from a possible 575. plFiberPlate : 69 possible sky positions to use as objects from a possible 574. plFiberPlate : 51 possible sky positions to use as objects from a possible 573. plFiberPlate : 36 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 37 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 17 possible sky positions to use as objects from a possible 568. plFiberPlate : 86 possible sky positions to use as objects from a possible 567. plFiberPlate : 56 possible sky positions to use as objects from a possible 566. plFiberPlate : 29 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 14 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : 5 possible sky positions to use as objects from a possible 560. plFiberPlate : 16 possible sky positions to use as objects from a possible 559. plFiberPlate : 66 possible sky positions to use as objects from a possible 558. plFiberPlate : 42 possible sky positions to use as objects from a possible 557. plFiberPlate : 26 possible sky positions to use as objects from a possible 556. plFiberPlate : 14 possible sky positions to use as objects from a possible 555. plFiberPlate : 29 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 19 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1427.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1428.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1428.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1429.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 120 2 7 83 3 9 80 4 22 124 5 11 132 6 10 116 7 8 91 8 8 96 9 14 112 10 20 135 11 12 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 1 253 36 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 38 49 plFiberPlate : adding spectro-photo std with objId = 3698 40 5 44 73 plFiberPlate : adding spectro-photo std with objId = 3698 40 1 39 119 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 258 44 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 261 24 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 49 12 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 262 71 plFiberPlate : 115 possible sky positions to use as objects from a possible 597. plFiberPlate : 43 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 15 possible sky positions to use as objects from a possible 594. plFiberPlate : 29 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 26 possible sky positions to use as objects from a possible 591. plFiberPlate : 94 possible sky positions to use as objects from a possible 590. plFiberPlate : 57 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 5 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 19 possible sky positions to use as objects from a possible 584. plFiberPlate : 28 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 70 possible sky positions to use as objects from a possible 581. plFiberPlate : 48 possible sky positions to use as objects from a possible 580. plFiberPlate : 32 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 8 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 9 possible sky positions to use as objects from a possible 575. plFiberPlate : 15 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 81 possible sky positions to use as objects from a possible 572. plFiberPlate : 42 possible sky positions to use as objects from a possible 571. plFiberPlate : 27 possible sky positions to use as objects from a possible 570. plFiberPlate : 36 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 5 possible sky positions to use as objects from a possible 567. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 566. plFiberPlate: No sky found for bundle at 259.924 164.797, increase box by 80 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1428.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1429.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1429.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1430.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 4 69 3 7 75 4 9 95 5 11 99 6 3 94 7 2 96 8 4 108 9 3 105 10 12 144 11 12 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 132 94 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 137 66 plFiberPlate : adding spectro-photo std with objId = 3647 40 3 129 2 plFiberPlate : adding spectro-photo std with objId = 3647 40 1 132 55 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 132 18 plFiberPlate : adding spectro-photo std with objId = 3704 40 4 157 2 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 124 29 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 130 96 plFiberPlate : 119 possible sky positions to use as objects from a possible 566. plFiberPlate : 65 possible sky positions to use as objects from a possible 565. plFiberPlate : 47 possible sky positions to use as objects from a possible 564. plFiberPlate : 39 possible sky positions to use as objects from a possible 563. plFiberPlate : 20 possible sky positions to use as objects from a possible 562. plFiberPlate : 51 possible sky positions to use as objects from a possible 561. plFiberPlate : 76 possible sky positions to use as objects from a possible 560. plFiberPlate : 62 possible sky positions to use as objects from a possible 559. plFiberPlate : 57 possible sky positions to use as objects from a possible 558. plFiberPlate : 26 possible sky positions to use as objects from a possible 557. plFiberPlate : 20 possible sky positions to use as objects from a possible 556. plFiberPlate : 17 possible sky positions to use as objects from a possible 555. plFiberPlate : 12 possible sky positions to use as objects from a possible 554. plFiberPlate : 22 possible sky positions to use as objects from a possible 553. plFiberPlate : 31 possible sky positions to use as objects from a possible 552. plFiberPlate : 23 possible sky positions to use as objects from a possible 551. plFiberPlate : 56 possible sky positions to use as objects from a possible 550. plFiberPlate : 40 possible sky positions to use as objects from a possible 549. plFiberPlate : 38 possible sky positions to use as objects from a possible 548. plFiberPlate : 18 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 18 possible sky positions to use as objects from a possible 545. plFiberPlate : 21 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 2 possible sky positions to use as objects from a possible 542. plFiberPlate : 51 possible sky positions to use as objects from a possible 541. plFiberPlate : 27 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : 7 possible sky positions to use as objects from a possible 538. plFiberPlate : 21 possible sky positions to use as objects from a possible 537. plFiberPlate : 19 possible sky positions to use as objects from a possible 536. plFiberPlate : 18 possible sky positions to use as objects from a possible 535. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1429.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1430.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1430.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1431.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 129 2 9 108 3 14 92 4 19 98 5 13 114 6 8 98 7 10 98 8 12 126 9 4 90 10 12 159 11 11 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 5 44 73 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 272 55 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 58 22 plFiberPlate : adding spectro-photo std with objId = 3698 40 5 54 80 plFiberPlate : adding spectro-photo std with objId = 3818 40 6 53 18 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 49 12 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 265 90 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 262 71 plFiberPlate : 123 possible sky positions to use as objects from a possible 614. plFiberPlate : 79 possible sky positions to use as objects from a possible 613. plFiberPlate : 54 possible sky positions to use as objects from a possible 612. plFiberPlate : 63 possible sky positions to use as objects from a possible 611. plFiberPlate : 45 possible sky positions to use as objects from a possible 610. plFiberPlate : 16 possible sky positions to use as objects from a possible 609. plFiberPlate : 43 possible sky positions to use as objects from a possible 608. plFiberPlate : 71 possible sky positions to use as objects from a possible 607. plFiberPlate : 43 possible sky positions to use as objects from a possible 606. plFiberPlate : 34 possible sky positions to use as objects from a possible 605. plFiberPlate : 25 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 7 possible sky positions to use as objects from a possible 602. plFiberPlate : 13 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 40 possible sky positions to use as objects from a possible 599. plFiberPlate : 38 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : 7 possible sky positions to use as objects from a possible 596. plFiberPlate : 4 possible sky positions to use as objects from a possible 595. plFiberPlate : 2 possible sky positions to use as objects from a possible 594. plFiberPlate : 5 possible sky positions to use as objects from a possible 593. plFiberPlate : 5 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 44 possible sky positions to use as objects from a possible 588. plFiberPlate : 22 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 9 possible sky positions to use as objects from a possible 585. plFiberPlate : 9 possible sky positions to use as objects from a possible 584. plFiberPlate : 46 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1430.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1431.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1431.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1432.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 108 2 3 77 3 8 88 4 9 109 5 3 116 6 7 96 7 6 87 8 7 102 9 4 98 10 7 159 11 4 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3647 40 1 139 16 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 147 59 plFiberPlate : adding spectro-photo std with objId = 3647 40 1 132 55 plFiberPlate : adding spectro-photo std with objId = 3813 40 1 103 88 plFiberPlate : adding spectro-photo std with objId = 3818 40 1 38 103 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 132 18 plFiberPlate : adding spectro-photo std with objId = 3704 40 4 178 51 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 130 96 plFiberPlate : 128 possible sky positions to use as objects from a possible 565. plFiberPlate : 97 possible sky positions to use as objects from a possible 564. plFiberPlate : 48 possible sky positions to use as objects from a possible 563. plFiberPlate : 12 possible sky positions to use as objects from a possible 562. plFiberPlate : 23 possible sky positions to use as objects from a possible 561. plFiberPlate : 46 possible sky positions to use as objects from a possible 560. plFiberPlate : 37 possible sky positions to use as objects from a possible 559. plFiberPlate : 87 possible sky positions to use as objects from a possible 558. plFiberPlate : 49 possible sky positions to use as objects from a possible 557. plFiberPlate : 38 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 29 possible sky positions to use as objects from a possible 554. plFiberPlate : 14 possible sky positions to use as objects from a possible 553. plFiberPlate : 7 possible sky positions to use as objects from a possible 552. plFiberPlate : 4 possible sky positions to use as objects from a possible 551. plFiberPlate : 15 possible sky positions to use as objects from a possible 550. plFiberPlate : 60 possible sky positions to use as objects from a possible 549. plFiberPlate : 49 possible sky positions to use as objects from a possible 548. plFiberPlate : 46 possible sky positions to use as objects from a possible 547. plFiberPlate : 26 possible sky positions to use as objects from a possible 546. plFiberPlate : 20 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 4 possible sky positions to use as objects from a possible 543. plFiberPlate : 17 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : 54 possible sky positions to use as objects from a possible 540. plFiberPlate : 34 possible sky positions to use as objects from a possible 539. plFiberPlate : 21 possible sky positions to use as objects from a possible 538. plFiberPlate : 15 possible sky positions to use as objects from a possible 537. plFiberPlate : 19 possible sky positions to use as objects from a possible 536. plFiberPlate : 15 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1431.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1432.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1432.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1433.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 98 2 2 63 3 4 90 4 3 111 5 4 122 6 8 106 7 9 93 8 10 112 9 11 104 10 10 134 11 7 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 142 48 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 144 29 plFiberPlate : adding spectro-photo std with objId = 3647 40 5 146 42 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 147 59 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 155 37 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 154 111 plFiberPlate : adding spectro-photo std with objId = 3647 40 4 152 73 plFiberPlate : adding spectro-photo std with objId = 3647 40 6 142 39 plFiberPlate : 115 possible sky positions to use as objects from a possible 572. plFiberPlate : 62 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 43 possible sky positions to use as objects from a possible 566. plFiberPlate : 74 possible sky positions to use as objects from a possible 565. plFiberPlate : 42 possible sky positions to use as objects from a possible 564. plFiberPlate : 20 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 4 possible sky positions to use as objects from a possible 560. plFiberPlate : 7 possible sky positions to use as objects from a possible 559. plFiberPlate : 16 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : 77 possible sky positions to use as objects from a possible 556. plFiberPlate : 58 possible sky positions to use as objects from a possible 555. plFiberPlate : 48 possible sky positions to use as objects from a possible 554. plFiberPlate : 40 possible sky positions to use as objects from a possible 553. plFiberPlate : 26 possible sky positions to use as objects from a possible 552. plFiberPlate : 23 possible sky positions to use as objects from a possible 551. plFiberPlate : 4 possible sky positions to use as objects from a possible 550. plFiberPlate : 27 possible sky positions to use as objects from a possible 549. plFiberPlate : 14 possible sky positions to use as objects from a possible 548. plFiberPlate : 60 possible sky positions to use as objects from a possible 547. plFiberPlate : 38 possible sky positions to use as objects from a possible 546. plFiberPlate : 36 possible sky positions to use as objects from a possible 545. plFiberPlate : 13 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 10 possible sky positions to use as objects from a possible 542. plFiberPlate : 44 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1432.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1433.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1433.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1434.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 120 2 7 94 3 12 97 4 19 116 5 17 129 6 10 100 7 6 89 8 8 105 9 8 101 10 18 159 11 8 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 286 21 plFiberPlate : adding spectro-photo std with objId = 3530 40 5 274 63 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 287 7 plFiberPlate : adding spectro-photo std with objId = 3530 40 5 287 10 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 58 22 plFiberPlate : adding spectro-photo std with objId = 3813 40 6 119 39 plFiberPlate : adding spectro-photo std with objId = 3530 40 5 290 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 72 60 plFiberPlate : 132 possible sky positions to use as objects from a possible 617. plFiberPlate : 72 possible sky positions to use as objects from a possible 616. plFiberPlate : 27 possible sky positions to use as objects from a possible 615. plFiberPlate : 18 possible sky positions to use as objects from a possible 614. plFiberPlate : 32 possible sky positions to use as objects from a possible 613. plFiberPlate : 19 possible sky positions to use as objects from a possible 612. plFiberPlate : 65 possible sky positions to use as objects from a possible 611. plFiberPlate : 62 possible sky positions to use as objects from a possible 610. plFiberPlate : 67 possible sky positions to use as objects from a possible 609. plFiberPlate : 33 possible sky positions to use as objects from a possible 608. plFiberPlate : 22 possible sky positions to use as objects from a possible 607. plFiberPlate : 6 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 28 possible sky positions to use as objects from a possible 602. plFiberPlate : 75 possible sky positions to use as objects from a possible 601. plFiberPlate : 38 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 16 possible sky positions to use as objects from a possible 597. plFiberPlate : 6 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 14 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 38 possible sky positions to use as objects from a possible 592. plFiberPlate : 49 possible sky positions to use as objects from a possible 591. plFiberPlate : 31 possible sky positions to use as objects from a possible 590. plFiberPlate : 16 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 8 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1433.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1434.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1434.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1435.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 119 2 2 65 3 5 79 4 8 116 5 8 134 6 5 106 7 2 93 8 4 113 9 1 114 10 10 141 11 5 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 70 50 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 75 18 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 154 111 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 78 21 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 69 2 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 73 49 plFiberPlate : adding spectro-photo std with objId = 3647 40 2 158 37 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 69 101 plFiberPlate : 121 possible sky positions to use as objects from a possible 591. plFiberPlate : 85 possible sky positions to use as objects from a possible 590. plFiberPlate : 46 possible sky positions to use as objects from a possible 589. plFiberPlate : 18 possible sky positions to use as objects from a possible 588. plFiberPlate : 27 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 56 possible sky positions to use as objects from a possible 585. plFiberPlate : 86 possible sky positions to use as objects from a possible 584. plFiberPlate : 51 possible sky positions to use as objects from a possible 583. plFiberPlate : 27 possible sky positions to use as objects from a possible 582. plFiberPlate : 11 possible sky positions to use as objects from a possible 581. plFiberPlate : 5 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 7 possible sky positions to use as objects from a possible 577. plFiberPlate : 40 possible sky positions to use as objects from a possible 576. plFiberPlate : 74 possible sky positions to use as objects from a possible 575. plFiberPlate : 40 possible sky positions to use as objects from a possible 574. plFiberPlate : 27 possible sky positions to use as objects from a possible 573. plFiberPlate : 14 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 4 possible sky positions to use as objects from a possible 570. plFiberPlate : 6 possible sky positions to use as objects from a possible 569. plFiberPlate : 16 possible sky positions to use as objects from a possible 568. plFiberPlate : 26 possible sky positions to use as objects from a possible 567. plFiberPlate : 83 possible sky positions to use as objects from a possible 566. plFiberPlate : 42 possible sky positions to use as objects from a possible 565. plFiberPlate : 18 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : 15 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1434.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1435.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1435.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1436.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 123 2 7 89 3 13 81 4 16 112 5 11 132 6 12 103 7 13 93 8 12 111 9 19 106 10 19 137 11 11 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 294 12 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 79 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 80 8 plFiberPlate : adding spectro-photo std with objId = 3530 40 1 294 35 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 78 16 plFiberPlate : adding spectro-photo std with objId = 3530 40 5 290 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 72 60 plFiberPlate : adding spectro-photo std with objId = 3813 40 6 134 65 plFiberPlate : 130 possible sky positions to use as objects from a possible 608. plFiberPlate : 57 possible sky positions to use as objects from a possible 607. plFiberPlate : 30 possible sky positions to use as objects from a possible 606. plFiberPlate : 36 possible sky positions to use as objects from a possible 605. plFiberPlate : 26 possible sky positions to use as objects from a possible 604. plFiberPlate : 32 possible sky positions to use as objects from a possible 603. plFiberPlate : 44 possible sky positions to use as objects from a possible 602. plFiberPlate : 84 possible sky positions to use as objects from a possible 601. plFiberPlate : 65 possible sky positions to use as objects from a possible 600. plFiberPlate : 28 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : 37 possible sky positions to use as objects from a possible 593. plFiberPlate : 74 possible sky positions to use as objects from a possible 592. plFiberPlate : 36 possible sky positions to use as objects from a possible 591. plFiberPlate : 32 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 5 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 26 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 26 possible sky positions to use as objects from a possible 583. plFiberPlate : 40 possible sky positions to use as objects from a possible 582. plFiberPlate : 27 possible sky positions to use as objects from a possible 581. plFiberPlate : 20 possible sky positions to use as objects from a possible 580. plFiberPlate : 18 possible sky positions to use as objects from a possible 579. plFiberPlate : 15 possible sky positions to use as objects from a possible 578. plFiberPlate : 22 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1435.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1436.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1436.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1437.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 115 2 3 76 3 4 83 4 7 106 5 8 101 6 11 101 7 8 103 8 8 108 9 10 120 10 8 162 11 6 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 79 50 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 76 15 plFiberPlate : adding spectro-photo std with objId = 3893 40 4 74 111 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 75 18 plFiberPlate : adding spectro-photo std with objId = 3840 40 1 80 58 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 80 24 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 85 45 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 82 8 plFiberPlate : 122 possible sky positions to use as objects from a possible 583. plFiberPlate : 112 possible sky positions to use as objects from a possible 582. plFiberPlate : 70 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 26 possible sky positions to use as objects from a possible 579. plFiberPlate : 38 possible sky positions to use as objects from a possible 578. plFiberPlate : 46 possible sky positions to use as objects from a possible 577. plFiberPlate : 80 possible sky positions to use as objects from a possible 576. plFiberPlate : 44 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 16 possible sky positions to use as objects from a possible 573. plFiberPlate : 14 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 6 possible sky positions to use as objects from a possible 570. plFiberPlate : 2 possible sky positions to use as objects from a possible 569. plFiberPlate : 5 possible sky positions to use as objects from a possible 568. plFiberPlate : 60 possible sky positions to use as objects from a possible 567. plFiberPlate : 56 possible sky positions to use as objects from a possible 566. plFiberPlate : 50 possible sky positions to use as objects from a possible 565. plFiberPlate : 32 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : 28 possible sky positions to use as objects from a possible 562. plFiberPlate : 24 possible sky positions to use as objects from a possible 561. plFiberPlate : 10 possible sky positions to use as objects from a possible 560. plFiberPlate : 15 possible sky positions to use as objects from a possible 559. plFiberPlate : 56 possible sky positions to use as objects from a possible 558. plFiberPlate : 45 possible sky positions to use as objects from a possible 557. plFiberPlate : 29 possible sky positions to use as objects from a possible 556. plFiberPlate : 23 possible sky positions to use as objects from a possible 555. plFiberPlate : 30 possible sky positions to use as objects from a possible 554. plFiberPlate : 12 possible sky positions to use as objects from a possible 553. plFiberPlate : 25 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1436.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1437.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1437.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1438.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 114 2 7 107 3 6 106 4 14 115 5 16 115 6 11 92 7 9 86 8 12 107 9 9 101 10 11 167 11 9 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 91 115 plFiberPlate : adding spectro-photo std with objId = 3530 40 5 311 93 plFiberPlate : adding spectro-photo std with objId = 3530 40 3 315 41 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 90 18 plFiberPlate : adding spectro-photo std with objId = 3698 40 1 96 29 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 310 68 plFiberPlate : adding spectro-photo std with objId = 3530 40 3 315 56 plFiberPlate : adding spectro-photo std with objId = 3813 40 6 148 93 plFiberPlate : 117 possible sky positions to use as objects from a possible 613. plFiberPlate : 92 possible sky positions to use as objects from a possible 612. plFiberPlate : 62 possible sky positions to use as objects from a possible 611. plFiberPlate : 45 possible sky positions to use as objects from a possible 610. plFiberPlate : 28 possible sky positions to use as objects from a possible 609. plFiberPlate : 46 possible sky positions to use as objects from a possible 608. plFiberPlate : 37 possible sky positions to use as objects from a possible 607. plFiberPlate : 89 possible sky positions to use as objects from a possible 606. plFiberPlate : 62 possible sky positions to use as objects from a possible 605. plFiberPlate : 29 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 12 possible sky positions to use as objects from a possible 599. plFiberPlate : 14 possible sky positions to use as objects from a possible 598. plFiberPlate : 80 possible sky positions to use as objects from a possible 597. plFiberPlate : 71 possible sky positions to use as objects from a possible 596. plFiberPlate : 44 possible sky positions to use as objects from a possible 595. plFiberPlate : 31 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 24 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 23 possible sky positions to use as objects from a possible 587. plFiberPlate : 6 possible sky positions to use as objects from a possible 586. plFiberPlate : 9 possible sky positions to use as objects from a possible 585. plFiberPlate : 6 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1437.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1438.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1438.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1439.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 117 2 6 71 3 4 92 4 7 108 5 13 145 6 15 105 7 7 84 8 7 109 9 8 111 10 11 137 11 9 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 86 25 plFiberPlate : adding spectro-photo std with objId = 3840 40 1 95 23 plFiberPlate : adding spectro-photo std with objId = 3893 40 4 92 8 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 95 121 plFiberPlate : adding spectro-photo std with objId = 3813 40 1 146 86 plFiberPlate : adding spectro-photo std with objId = 3840 40 6 92 57 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 82 8 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 85 45 plFiberPlate : 117 possible sky positions to use as objects from a possible 603. plFiberPlate : 58 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : 6 possible sky positions to use as objects from a possible 599. plFiberPlate : 12 possible sky positions to use as objects from a possible 598. plFiberPlate : 48 possible sky positions to use as objects from a possible 597. plFiberPlate : 95 possible sky positions to use as objects from a possible 596. plFiberPlate : 73 possible sky positions to use as objects from a possible 595. plFiberPlate : 18 possible sky positions to use as objects from a possible 594. plFiberPlate : 4 possible sky positions to use as objects from a possible 593. plFiberPlate : 11 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 13 possible sky positions to use as objects from a possible 590. plFiberPlate : 15 possible sky positions to use as objects from a possible 589. plFiberPlate : 37 possible sky positions to use as objects from a possible 588. plFiberPlate : 88 possible sky positions to use as objects from a possible 587. plFiberPlate : 77 possible sky positions to use as objects from a possible 586. plFiberPlate : 25 possible sky positions to use as objects from a possible 585. plFiberPlate : 33 possible sky positions to use as objects from a possible 584. plFiberPlate : 32 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 13 possible sky positions to use as objects from a possible 581. plFiberPlate : 15 possible sky positions to use as objects from a possible 580. plFiberPlate : 35 possible sky positions to use as objects from a possible 579. plFiberPlate : 76 possible sky positions to use as objects from a possible 578. plFiberPlate : 42 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 17 possible sky positions to use as objects from a possible 573. plFiberPlate : 28 possible sky positions to use as objects from a possible 572. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1438.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1439.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1439.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1440.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 107 2 3 59 3 6 66 4 6 100 5 8 117 6 8 92 7 4 102 8 3 112 9 6 110 10 14 132 11 5 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 108 67 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 105 29 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 106 21 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 107 8 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 110 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 95 121 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 94 101 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 107 16 plFiberPlate : 100 possible sky positions to use as objects from a possible 552. plFiberPlate : 100 possible sky positions to use as objects from a possible 551. plFiberPlate : 51 possible sky positions to use as objects from a possible 550. plFiberPlate : 19 possible sky positions to use as objects from a possible 549. plFiberPlate : 30 possible sky positions to use as objects from a possible 548. plFiberPlate : 18 possible sky positions to use as objects from a possible 547. plFiberPlate : 59 possible sky positions to use as objects from a possible 546. plFiberPlate : 69 possible sky positions to use as objects from a possible 545. plFiberPlate : 58 possible sky positions to use as objects from a possible 544. plFiberPlate : 48 possible sky positions to use as objects from a possible 543. plFiberPlate : 28 possible sky positions to use as objects from a possible 542. plFiberPlate : 17 possible sky positions to use as objects from a possible 541. plFiberPlate : 6 possible sky positions to use as objects from a possible 540. plFiberPlate : 12 possible sky positions to use as objects from a possible 539. plFiberPlate : 16 possible sky positions to use as objects from a possible 538. plFiberPlate : 29 possible sky positions to use as objects from a possible 537. plFiberPlate : 87 possible sky positions to use as objects from a possible 536. plFiberPlate : 63 possible sky positions to use as objects from a possible 535. plFiberPlate : 51 possible sky positions to use as objects from a possible 534. plFiberPlate : 37 possible sky positions to use as objects from a possible 533. plFiberPlate : 14 possible sky positions to use as objects from a possible 532. plFiberPlate : 10 possible sky positions to use as objects from a possible 531. plFiberPlate : 17 possible sky positions to use as objects from a possible 530. plFiberPlate : 27 possible sky positions to use as objects from a possible 529. plFiberPlate : 14 possible sky positions to use as objects from a possible 528. plFiberPlate : 40 possible sky positions to use as objects from a possible 527. plFiberPlate : 22 possible sky positions to use as objects from a possible 526. plFiberPlate : 22 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 26 possible sky positions to use as objects from a possible 522. plFiberPlate : 18 possible sky positions to use as objects from a possible 521. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1439.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1440.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1440.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1441.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 129 2 6 104 3 11 94 4 13 113 5 11 121 6 6 87 7 7 82 8 8 109 9 11 106 10 16 157 11 9 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 5 326 29 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 112 81 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 98 100 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 110 62 plFiberPlate : adding spectro-photo std with objId = 3530 40 5 325 39 plFiberPlate : adding spectro-photo std with objId = 3813 40 6 157 59 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 102 21 plFiberPlate : adding spectro-photo std with objId = 3530 40 3 315 56 plFiberPlate : 123 possible sky positions to use as objects from a possible 614. plFiberPlate : 75 possible sky positions to use as objects from a possible 613. plFiberPlate : 37 possible sky positions to use as objects from a possible 612. plFiberPlate : 17 possible sky positions to use as objects from a possible 611. plFiberPlate : 48 possible sky positions to use as objects from a possible 610. plFiberPlate : 22 possible sky positions to use as objects from a possible 609. plFiberPlate : 67 possible sky positions to use as objects from a possible 608. plFiberPlate : 104 possible sky positions to use as objects from a possible 607. plFiberPlate : 46 possible sky positions to use as objects from a possible 606. plFiberPlate : 26 possible sky positions to use as objects from a possible 605. plFiberPlate : 17 possible sky positions to use as objects from a possible 604. plFiberPlate : 2 possible sky positions to use as objects from a possible 603. plFiberPlate : 15 possible sky positions to use as objects from a possible 602. plFiberPlate : 33 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 15 possible sky positions to use as objects from a possible 599. plFiberPlate : 61 possible sky positions to use as objects from a possible 598. plFiberPlate : 38 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 9 possible sky positions to use as objects from a possible 595. plFiberPlate : 7 possible sky positions to use as objects from a possible 594. plFiberPlate : 4 possible sky positions to use as objects from a possible 593. plFiberPlate : 9 possible sky positions to use as objects from a possible 592. plFiberPlate : 26 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 26 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 5 possible sky positions to use as objects from a possible 586. plFiberPlate : 6 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1440.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1441.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1441.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1442.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 119 2 9 93 3 6 95 4 10 116 5 14 115 6 8 96 7 10 95 8 13 110 9 8 95 10 12 144 11 10 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 328 43 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 113 90 plFiberPlate : adding spectro-photo std with objId = 3813 40 6 171 41 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 110 62 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 340 74 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 107 15 plFiberPlate : adding spectro-photo std with objId = 3698 40 5 111 72 plFiberPlate : adding spectro-photo std with objId = 3530 40 4 338 88 plFiberPlate : 132 possible sky positions to use as objects from a possible 604. plFiberPlate : 89 possible sky positions to use as objects from a possible 603. plFiberPlate : 50 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 35 possible sky positions to use as objects from a possible 600. plFiberPlate : 30 possible sky positions to use as objects from a possible 599. plFiberPlate : 64 possible sky positions to use as objects from a possible 598. plFiberPlate : 79 possible sky positions to use as objects from a possible 597. plFiberPlate : 60 possible sky positions to use as objects from a possible 596. plFiberPlate : 28 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 8 possible sky positions to use as objects from a possible 593. plFiberPlate : 8 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 28 possible sky positions to use as objects from a possible 590. plFiberPlate : 19 possible sky positions to use as objects from a possible 589. plFiberPlate : 76 possible sky positions to use as objects from a possible 588. plFiberPlate : 54 possible sky positions to use as objects from a possible 587. plFiberPlate : 24 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 7 possible sky positions to use as objects from a possible 584. plFiberPlate : 4 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 20 possible sky positions to use as objects from a possible 581. plFiberPlate : 22 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 12 possible sky positions to use as objects from a possible 578. plFiberPlate : 5 possible sky positions to use as objects from a possible 577. plFiberPlate : 1 possible sky positions to use as objects from a possible 576. plFiberPlate : 9 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 24 possible sky positions to use as objects from a possible 573. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1441.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1442.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1442.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1443.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 103 2 7 61 3 6 63 4 4 107 5 5 124 6 3 101 7 1 97 8 4 113 9 5 104 10 9 142 11 9 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 106 59 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 110 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 125 14 plFiberPlate : adding spectro-photo std with objId = 3840 40 1 112 34 plFiberPlate : adding spectro-photo std with objId = 3840 40 6 109 71 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 122 28 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 118 20 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 107 16 plFiberPlate : 121 possible sky positions to use as objects from a possible 556. plFiberPlate : 79 possible sky positions to use as objects from a possible 555. plFiberPlate : 36 possible sky positions to use as objects from a possible 554. plFiberPlate : 15 possible sky positions to use as objects from a possible 553. plFiberPlate : 27 possible sky positions to use as objects from a possible 552. plFiberPlate : 35 possible sky positions to use as objects from a possible 551. plFiberPlate : 30 possible sky positions to use as objects from a possible 550. plFiberPlate : 71 possible sky positions to use as objects from a possible 549. plFiberPlate : 53 possible sky positions to use as objects from a possible 548. plFiberPlate : 29 possible sky positions to use as objects from a possible 547. plFiberPlate : 26 possible sky positions to use as objects from a possible 546. plFiberPlate : 20 possible sky positions to use as objects from a possible 545. plFiberPlate : 10 possible sky positions to use as objects from a possible 544. plFiberPlate : 11 possible sky positions to use as objects from a possible 543. plFiberPlate : 9 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : 64 possible sky positions to use as objects from a possible 540. plFiberPlate : 61 possible sky positions to use as objects from a possible 539. plFiberPlate : 30 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 25 possible sky positions to use as objects from a possible 532. plFiberPlate : 37 possible sky positions to use as objects from a possible 531. plFiberPlate : 40 possible sky positions to use as objects from a possible 530. plFiberPlate : 33 possible sky positions to use as objects from a possible 529. plFiberPlate : 14 possible sky positions to use as objects from a possible 528. plFiberPlate : 29 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 29 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1442.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1443.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1443.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1444.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 127 2 7 101 3 7 91 4 15 109 5 10 116 6 11 95 7 9 91 8 10 108 9 8 111 10 13 166 11 7 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 1 131 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 125 15 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 342 47 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 124 67 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 123 38 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 347 20 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 134 72 plFiberPlate : adding spectro-photo std with objId = 3530 40 4 338 88 plFiberPlate : 120 possible sky positions to use as objects from a possible 613. plFiberPlate : 64 possible sky positions to use as objects from a possible 612. plFiberPlate : 27 possible sky positions to use as objects from a possible 611. plFiberPlate : 21 possible sky positions to use as objects from a possible 610. plFiberPlate : 29 possible sky positions to use as objects from a possible 609. plFiberPlate : 32 possible sky positions to use as objects from a possible 608. plFiberPlate : 50 possible sky positions to use as objects from a possible 607. plFiberPlate : 74 possible sky positions to use as objects from a possible 606. plFiberPlate : 60 possible sky positions to use as objects from a possible 605. plFiberPlate : 20 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 7 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 21 possible sky positions to use as objects from a possible 600. plFiberPlate : 28 possible sky positions to use as objects from a possible 599. plFiberPlate : 25 possible sky positions to use as objects from a possible 598. plFiberPlate : 67 possible sky positions to use as objects from a possible 597. plFiberPlate : 73 possible sky positions to use as objects from a possible 596. plFiberPlate : 49 possible sky positions to use as objects from a possible 595. plFiberPlate : 39 possible sky positions to use as objects from a possible 594. plFiberPlate : 25 possible sky positions to use as objects from a possible 593. plFiberPlate : 22 possible sky positions to use as objects from a possible 592. plFiberPlate : 18 possible sky positions to use as objects from a possible 591. plFiberPlate : 24 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 36 possible sky positions to use as objects from a possible 588. plFiberPlate : 30 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 17 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 7 possible sky positions to use as objects from a possible 583. plFiberPlate : 25 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1443.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1444.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1444.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1445.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 126 2 2 80 3 6 81 4 7 102 5 9 108 6 10 93 7 3 83 8 6 98 9 6 102 10 4 149 11 1 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 125 55 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 128 53 plFiberPlate : adding spectro-photo std with objId = 3893 40 4 129 27 plFiberPlate : adding spectro-photo std with objId = 3818 40 1 126 50 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 137 32 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 136 92 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 131 47 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 134 104 plFiberPlate : 121 possible sky positions to use as objects from a possible 576. plFiberPlate : 82 possible sky positions to use as objects from a possible 575. plFiberPlate : 63 possible sky positions to use as objects from a possible 574. plFiberPlate : 37 possible sky positions to use as objects from a possible 573. plFiberPlate : 25 possible sky positions to use as objects from a possible 572. plFiberPlate : 43 possible sky positions to use as objects from a possible 571. plFiberPlate : 47 possible sky positions to use as objects from a possible 570. plFiberPlate : 79 possible sky positions to use as objects from a possible 569. plFiberPlate : 59 possible sky positions to use as objects from a possible 568. plFiberPlate : 31 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 9 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 29 possible sky positions to use as objects from a possible 561. plFiberPlate : 58 possible sky positions to use as objects from a possible 560. plFiberPlate : 34 possible sky positions to use as objects from a possible 559. plFiberPlate : 22 possible sky positions to use as objects from a possible 558. plFiberPlate : 16 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 9 possible sky positions to use as objects from a possible 555. plFiberPlate : 11 possible sky positions to use as objects from a possible 554. plFiberPlate : 28 possible sky positions to use as objects from a possible 553. plFiberPlate : 12 possible sky positions to use as objects from a possible 552. plFiberPlate : 54 possible sky positions to use as objects from a possible 551. plFiberPlate : 60 possible sky positions to use as objects from a possible 550. plFiberPlate : 34 possible sky positions to use as objects from a possible 549. plFiberPlate : 9 possible sky positions to use as objects from a possible 548. plFiberPlate : 15 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 21 possible sky positions to use as objects from a possible 545. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1444.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1445.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1445.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1446.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 122 2 8 95 3 8 94 4 9 123 5 11 117 6 11 102 7 10 97 8 5 107 9 8 108 10 16 142 11 12 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 1 355 2 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 357 22 plFiberPlate : adding spectro-photo std with objId = 3530 40 2 366 12 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 359 64 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 148 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 4 362 72 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 134 72 plFiberPlate : adding spectro-photo std with objId = 3530 40 4 368 47 plFiberPlate : 119 possible sky positions to use as objects from a possible 615. plFiberPlate : 72 possible sky positions to use as objects from a possible 614. plFiberPlate : 44 possible sky positions to use as objects from a possible 613. plFiberPlate : 17 possible sky positions to use as objects from a possible 612. plFiberPlate : 34 possible sky positions to use as objects from a possible 611. plFiberPlate : 31 possible sky positions to use as objects from a possible 610. plFiberPlate : 54 possible sky positions to use as objects from a possible 609. plFiberPlate : 88 possible sky positions to use as objects from a possible 608. plFiberPlate : 58 possible sky positions to use as objects from a possible 607. plFiberPlate : 28 possible sky positions to use as objects from a possible 606. plFiberPlate : 10 possible sky positions to use as objects from a possible 605. plFiberPlate : 6 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 25 possible sky positions to use as objects from a possible 601. plFiberPlate : 23 possible sky positions to use as objects from a possible 600. plFiberPlate : 76 possible sky positions to use as objects from a possible 599. plFiberPlate : 44 possible sky positions to use as objects from a possible 598. plFiberPlate : 35 possible sky positions to use as objects from a possible 597. plFiberPlate : 19 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : 11 possible sky positions to use as objects from a possible 591. plFiberPlate : 45 possible sky positions to use as objects from a possible 590. plFiberPlate : 37 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 3 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1445.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1446.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1446.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1447.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 114 2 5 68 3 7 86 4 12 117 5 10 115 6 7 84 7 8 82 8 4 102 9 9 107 10 11 160 11 6 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 141 78 plFiberPlate : adding spectro-photo std with objId = 3818 40 1 135 110 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 141 27 plFiberPlate : adding spectro-photo std with objId = 3840 40 1 143 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 136 25 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 144 109 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 144 65 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 137 32 plFiberPlate : 145 possible sky positions to use as objects from a possible 581. plFiberPlate : 88 possible sky positions to use as objects from a possible 580. plFiberPlate : 49 possible sky positions to use as objects from a possible 579. plFiberPlate : 26 possible sky positions to use as objects from a possible 578. plFiberPlate : 21 possible sky positions to use as objects from a possible 577. plFiberPlate : 30 possible sky positions to use as objects from a possible 576. plFiberPlate : 41 possible sky positions to use as objects from a possible 575. plFiberPlate : 84 possible sky positions to use as objects from a possible 574. plFiberPlate : 57 possible sky positions to use as objects from a possible 573. plFiberPlate : 47 possible sky positions to use as objects from a possible 572. plFiberPlate : 25 possible sky positions to use as objects from a possible 571. plFiberPlate : 16 possible sky positions to use as objects from a possible 570. plFiberPlate : 8 possible sky positions to use as objects from a possible 569. plFiberPlate : 20 possible sky positions to use as objects from a possible 568. plFiberPlate : 33 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 66 possible sky positions to use as objects from a possible 565. plFiberPlate : 47 possible sky positions to use as objects from a possible 564. plFiberPlate : 28 possible sky positions to use as objects from a possible 563. plFiberPlate : 6 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 17 possible sky positions to use as objects from a possible 560. plFiberPlate : 12 possible sky positions to use as objects from a possible 559. plFiberPlate : 8 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 33 possible sky positions to use as objects from a possible 556. plFiberPlate : 36 possible sky positions to use as objects from a possible 555. plFiberPlate : 19 possible sky positions to use as objects from a possible 554. plFiberPlate : 5 possible sky positions to use as objects from a possible 553. plFiberPlate : 10 possible sky positions to use as objects from a possible 552. plFiberPlate : 27 possible sky positions to use as objects from a possible 551. plFiberPlate : 13 possible sky positions to use as objects from a possible 550. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1446.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1447.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1447.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1448.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 125 2 5 82 3 3 77 4 1 111 5 5 133 6 6 89 7 4 87 8 3 114 9 5 93 10 9 158 11 9 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 161 11 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 157 79 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 150 42 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 162 8 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 156 79 plFiberPlate : adding spectro-photo std with objId = 3893 40 4 162 15 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 160 39 plFiberPlate : adding spectro-photo std with objId = 3818 40 1 152 6 plFiberPlate : 129 possible sky positions to use as objects from a possible 593. plFiberPlate : 79 possible sky positions to use as objects from a possible 592. plFiberPlate : 39 possible sky positions to use as objects from a possible 591. plFiberPlate : 38 possible sky positions to use as objects from a possible 590. plFiberPlate : 58 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 28 possible sky positions to use as objects from a possible 587. plFiberPlate : 103 possible sky positions to use as objects from a possible 586. plFiberPlate : 81 possible sky positions to use as objects from a possible 585. plFiberPlate : 54 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 3 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 28 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 19 possible sky positions to use as objects from a possible 578. plFiberPlate : 49 possible sky positions to use as objects from a possible 577. plFiberPlate : 46 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : 6 possible sky positions to use as objects from a possible 574. plFiberPlate : 4 possible sky positions to use as objects from a possible 573. plFiberPlate : 7 possible sky positions to use as objects from a possible 572. plFiberPlate : 1 possible sky positions to use as objects from a possible 571. plFiberPlate : 22 possible sky positions to use as objects from a possible 570. plFiberPlate : 29 possible sky positions to use as objects from a possible 569. plFiberPlate : 37 possible sky positions to use as objects from a possible 568. plFiberPlate : 32 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 18 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1447.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1448.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1448.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1449.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 126 2 4 94 3 4 89 4 6 106 5 6 127 6 6 88 7 5 91 8 11 129 9 3 107 10 7 142 11 5 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 6 371 93 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 152 96 plFiberPlate : adding spectro-photo std with objId = 3698 40 1 158 14 plFiberPlate : adding spectro-photo std with objId = 3698 40 1 153 41 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 148 4 plFiberPlate : adding spectro-photo std with objId = 3530 40 4 362 72 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 150 102 plFiberPlate : adding spectro-photo std with objId = 3530 40 4 368 47 plFiberPlate : 110 possible sky positions to use as objects from a possible 615. plFiberPlate : 78 possible sky positions to use as objects from a possible 614. plFiberPlate : 63 possible sky positions to use as objects from a possible 613. plFiberPlate : 26 possible sky positions to use as objects from a possible 612. plFiberPlate : 22 possible sky positions to use as objects from a possible 611. plFiberPlate : 23 possible sky positions to use as objects from a possible 610. plFiberPlate : 56 possible sky positions to use as objects from a possible 609. plFiberPlate : 82 possible sky positions to use as objects from a possible 608. plFiberPlate : 57 possible sky positions to use as objects from a possible 607. plFiberPlate : 31 possible sky positions to use as objects from a possible 606. plFiberPlate : 14 possible sky positions to use as objects from a possible 605. plFiberPlate : 10 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 22 possible sky positions to use as objects from a possible 601. plFiberPlate : 28 possible sky positions to use as objects from a possible 600. plFiberPlate : 92 possible sky positions to use as objects from a possible 599. plFiberPlate : 55 possible sky positions to use as objects from a possible 598. plFiberPlate : 30 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 10 possible sky positions to use as objects from a possible 595. plFiberPlate : 15 possible sky positions to use as objects from a possible 594. plFiberPlate : 15 possible sky positions to use as objects from a possible 593. plFiberPlate : 36 possible sky positions to use as objects from a possible 592. plFiberPlate : 25 possible sky positions to use as objects from a possible 591. plFiberPlate : 34 possible sky positions to use as objects from a possible 590. plFiberPlate : 12 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 11 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1448.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1449.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1449.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1450.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 120 2 5 73 3 1 80 4 4 112 5 7 141 6 5 105 7 4 91 8 3 99 9 3 102 10 9 145 11 10 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 167 45 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 166 5 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 161 15 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 162 8 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 160 39 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 166 25 plFiberPlate : adding spectro-photo std with objId = 3893 40 4 173 85 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 172 33 plFiberPlate : 123 possible sky positions to use as objects from a possible 593. plFiberPlate : 86 possible sky positions to use as objects from a possible 592. plFiberPlate : 40 possible sky positions to use as objects from a possible 591. plFiberPlate : 22 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 33 possible sky positions to use as objects from a possible 588. plFiberPlate : 34 possible sky positions to use as objects from a possible 587. plFiberPlate : 79 possible sky positions to use as objects from a possible 586. plFiberPlate : 56 possible sky positions to use as objects from a possible 585. plFiberPlate : 46 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 7 possible sky positions to use as objects from a possible 582. plFiberPlate : 12 possible sky positions to use as objects from a possible 581. plFiberPlate : 26 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 20 possible sky positions to use as objects from a possible 578. plFiberPlate : 80 possible sky positions to use as objects from a possible 577. plFiberPlate : 70 possible sky positions to use as objects from a possible 576. plFiberPlate : 26 possible sky positions to use as objects from a possible 575. plFiberPlate : 11 possible sky positions to use as objects from a possible 574. plFiberPlate : 9 possible sky positions to use as objects from a possible 573. plFiberPlate : 6 possible sky positions to use as objects from a possible 572. plFiberPlate : 8 possible sky positions to use as objects from a possible 571. plFiberPlate : 17 possible sky positions to use as objects from a possible 570. plFiberPlate : 22 possible sky positions to use as objects from a possible 569. plFiberPlate : 48 possible sky positions to use as objects from a possible 568. plFiberPlate : 35 possible sky positions to use as objects from a possible 567. plFiberPlate : 18 possible sky positions to use as objects from a possible 566. plFiberPlate : 26 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 13 possible sky positions to use as objects from a possible 563. plFiberPlate : 15 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1449.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1450.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1450.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1451.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 125 2 2 96 3 5 99 4 9 120 5 12 146 6 9 98 7 6 90 8 10 108 9 11 105 10 8 143 11 3 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 162 25 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 34 33 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 160 34 plFiberPlate : adding spectro-photo std with objId = 3530 40 1 380 126 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 33 106 plFiberPlate : adding spectro-photo std with objId = 3716 41 3 41 63 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 165 31 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 44 48 plFiberPlate : 136 possible sky positions to use as objects from a possible 633. plFiberPlate : 75 possible sky positions to use as objects from a possible 632. plFiberPlate : 29 possible sky positions to use as objects from a possible 631. plFiberPlate : 23 possible sky positions to use as objects from a possible 630. plFiberPlate : 18 possible sky positions to use as objects from a possible 629. plFiberPlate : 25 possible sky positions to use as objects from a possible 628. plFiberPlate : 51 possible sky positions to use as objects from a possible 627. plFiberPlate : 97 possible sky positions to use as objects from a possible 626. plFiberPlate : 60 possible sky positions to use as objects from a possible 625. plFiberPlate : 22 possible sky positions to use as objects from a possible 624. plFiberPlate : 13 possible sky positions to use as objects from a possible 623. plFiberPlate : 9 possible sky positions to use as objects from a possible 622. plFiberPlate : 13 possible sky positions to use as objects from a possible 621. plFiberPlate : 13 possible sky positions to use as objects from a possible 620. plFiberPlate : 20 possible sky positions to use as objects from a possible 619. plFiberPlate : 22 possible sky positions to use as objects from a possible 618. plFiberPlate : 103 possible sky positions to use as objects from a possible 617. plFiberPlate : 60 possible sky positions to use as objects from a possible 616. plFiberPlate : 28 possible sky positions to use as objects from a possible 615. plFiberPlate : 14 possible sky positions to use as objects from a possible 614. plFiberPlate : 4 possible sky positions to use as objects from a possible 613. plFiberPlate : 9 possible sky positions to use as objects from a possible 612. plFiberPlate : 7 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 24 possible sky positions to use as objects from a possible 609. plFiberPlate : 47 possible sky positions to use as objects from a possible 608. plFiberPlate : 29 possible sky positions to use as objects from a possible 607. plFiberPlate : 11 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1450.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1451.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1451.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1452.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 120 2 8 66 3 4 67 4 6 102 5 8 129 6 8 97 7 14 83 8 10 106 9 11 119 10 10 139 11 10 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 183 59 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 187 32 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 191 76 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 180 29 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 184 30 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 182 15 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 177 81 plFiberPlate : adding spectro-photo std with objId = 3893 40 4 173 85 plFiberPlate : 104 possible sky positions to use as objects from a possible 583. plFiberPlate : 63 possible sky positions to use as objects from a possible 582. plFiberPlate : 45 possible sky positions to use as objects from a possible 581. plFiberPlate : 28 possible sky positions to use as objects from a possible 580. plFiberPlate : 36 possible sky positions to use as objects from a possible 579. plFiberPlate : 40 possible sky positions to use as objects from a possible 578. plFiberPlate : 36 possible sky positions to use as objects from a possible 577. plFiberPlate : 76 possible sky positions to use as objects from a possible 576. plFiberPlate : 57 possible sky positions to use as objects from a possible 575. plFiberPlate : 47 possible sky positions to use as objects from a possible 574. plFiberPlate : 30 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 6 possible sky positions to use as objects from a possible 571. plFiberPlate : 13 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 24 possible sky positions to use as objects from a possible 568. plFiberPlate : 93 possible sky positions to use as objects from a possible 567. plFiberPlate : 73 possible sky positions to use as objects from a possible 566. plFiberPlate : 40 possible sky positions to use as objects from a possible 565. plFiberPlate : 19 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : 12 possible sky positions to use as objects from a possible 561. plFiberPlate : 16 possible sky positions to use as objects from a possible 560. plFiberPlate : 24 possible sky positions to use as objects from a possible 559. plFiberPlate : 37 possible sky positions to use as objects from a possible 558. plFiberPlate : 43 possible sky positions to use as objects from a possible 557. plFiberPlate : 19 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : 8 possible sky positions to use as objects from a possible 553. plFiberPlate : 17 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1451.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1452.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1452.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1453.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 123 2 10 93 3 12 90 4 5 112 5 14 114 6 9 90 7 10 92 8 11 102 9 8 103 10 17 140 11 9 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 54 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 2 181 53 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 175 55 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 60 114 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 53 99 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 182 6 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 50 2 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 44 48 plFiberPlate : 120 possible sky positions to use as objects from a possible 596. plFiberPlate : 64 possible sky positions to use as objects from a possible 595. plFiberPlate : 27 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 29 possible sky positions to use as objects from a possible 592. plFiberPlate : 30 possible sky positions to use as objects from a possible 591. plFiberPlate : 51 possible sky positions to use as objects from a possible 590. plFiberPlate : 69 possible sky positions to use as objects from a possible 589. plFiberPlate : 40 possible sky positions to use as objects from a possible 588. plFiberPlate : 22 possible sky positions to use as objects from a possible 587. plFiberPlate : 5 possible sky positions to use as objects from a possible 586. plFiberPlate : 5 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 74 possible sky positions to use as objects from a possible 580. plFiberPlate : 44 possible sky positions to use as objects from a possible 579. plFiberPlate : 32 possible sky positions to use as objects from a possible 578. plFiberPlate : 18 possible sky positions to use as objects from a possible 577. plFiberPlate : 14 possible sky positions to use as objects from a possible 576. plFiberPlate : 8 possible sky positions to use as objects from a possible 575. plFiberPlate : 6 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 32 possible sky positions to use as objects from a possible 572. plFiberPlate : 33 possible sky positions to use as objects from a possible 571. plFiberPlate : 36 possible sky positions to use as objects from a possible 570. plFiberPlate : 15 possible sky positions to use as objects from a possible 569. plFiberPlate : 16 possible sky positions to use as objects from a possible 568. plFiberPlate : 11 possible sky positions to use as objects from a possible 567. plFiberPlate : 12 possible sky positions to use as objects from a possible 566. plFiberPlate : 15 possible sky positions to use as objects from a possible 565. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1452.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1453.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1453.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1454.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 118 2 3 70 3 5 66 4 9 103 5 7 120 6 4 97 7 6 90 8 7 113 9 5 98 10 5 143 11 2 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 192 7 plFiberPlate : adding spectro-photo std with objId = 3840 40 6 200 23 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 191 76 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 204 57 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 197 48 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 193 46 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 196 43 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 194 55 plFiberPlate : 105 possible sky positions to use as objects from a possible 568. plFiberPlate : 69 possible sky positions to use as objects from a possible 567. plFiberPlate : 45 possible sky positions to use as objects from a possible 566. plFiberPlate : 38 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 30 possible sky positions to use as objects from a possible 563. plFiberPlate : 37 possible sky positions to use as objects from a possible 562. plFiberPlate : 83 possible sky positions to use as objects from a possible 561. plFiberPlate : 47 possible sky positions to use as objects from a possible 560. plFiberPlate : 22 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 8 possible sky positions to use as objects from a possible 557. plFiberPlate : 3 possible sky positions to use as objects from a possible 556. plFiberPlate : 17 possible sky positions to use as objects from a possible 555. plFiberPlate : 25 possible sky positions to use as objects from a possible 554. plFiberPlate : 19 possible sky positions to use as objects from a possible 553. plFiberPlate : 50 possible sky positions to use as objects from a possible 552. plFiberPlate : 37 possible sky positions to use as objects from a possible 551. plFiberPlate : 20 possible sky positions to use as objects from a possible 550. plFiberPlate : 14 possible sky positions to use as objects from a possible 549. plFiberPlate : 5 possible sky positions to use as objects from a possible 548. plFiberPlate : 4 possible sky positions to use as objects from a possible 547. plFiberPlate : 4 possible sky positions to use as objects from a possible 546. plFiberPlate : 6 possible sky positions to use as objects from a possible 545. plFiberPlate : 40 possible sky positions to use as objects from a possible 544. plFiberPlate : 50 possible sky positions to use as objects from a possible 543. plFiberPlate : 48 possible sky positions to use as objects from a possible 542. plFiberPlate : 30 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 16 possible sky positions to use as objects from a possible 538. plFiberPlate : 25 possible sky positions to use as objects from a possible 537. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1453.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1454.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1454.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1455.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 131 2 11 101 3 10 89 4 11 110 5 10 118 6 9 100 7 7 102 8 12 120 9 10 116 10 16 156 11 14 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 188 26 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 63 9 plFiberPlate : adding spectro-photo std with objId = 3698 40 4 196 24 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 63 67 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 60 114 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 60 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 59 46 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 65 43 plFiberPlate : 117 possible sky positions to use as objects from a possible 629. plFiberPlate : 80 possible sky positions to use as objects from a possible 628. plFiberPlate : 32 possible sky positions to use as objects from a possible 627. plFiberPlate : 32 possible sky positions to use as objects from a possible 626. plFiberPlate : 35 possible sky positions to use as objects from a possible 625. plFiberPlate : 32 possible sky positions to use as objects from a possible 624. plFiberPlate : 47 possible sky positions to use as objects from a possible 623. plFiberPlate : 82 possible sky positions to use as objects from a possible 622. plFiberPlate : 48 possible sky positions to use as objects from a possible 621. plFiberPlate : 33 possible sky positions to use as objects from a possible 620. plFiberPlate : 21 possible sky positions to use as objects from a possible 619. plFiberPlate : 17 possible sky positions to use as objects from a possible 618. plFiberPlate : 11 possible sky positions to use as objects from a possible 617. plFiberPlate : 20 possible sky positions to use as objects from a possible 616. plFiberPlate : 8 possible sky positions to use as objects from a possible 615. plFiberPlate : 33 possible sky positions to use as objects from a possible 614. plFiberPlate : 63 possible sky positions to use as objects from a possible 613. plFiberPlate : 54 possible sky positions to use as objects from a possible 612. plFiberPlate : 35 possible sky positions to use as objects from a possible 611. plFiberPlate : 31 possible sky positions to use as objects from a possible 610. plFiberPlate : 25 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 18 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 53 possible sky positions to use as objects from a possible 604. plFiberPlate : 34 possible sky positions to use as objects from a possible 603. plFiberPlate : 26 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 4 possible sky positions to use as objects from a possible 600. plFiberPlate : 9 possible sky positions to use as objects from a possible 599. plFiberPlate : 18 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1454.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1455.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1455.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1456.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 110 2 2 71 3 4 75 4 6 106 5 9 123 6 9 113 7 7 101 8 11 118 9 11 123 10 11 137 11 9 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 1 207 2 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 206 2 plFiberPlate : adding spectro-photo std with objId = 3840 40 6 205 45 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 206 53 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 207 25 plFiberPlate : adding spectro-photo std with objId = 3840 40 6 214 30 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 204 57 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 213 2 plFiberPlate : 112 possible sky positions to use as objects from a possible 600. plFiberPlate : 74 possible sky positions to use as objects from a possible 599. plFiberPlate : 41 possible sky positions to use as objects from a possible 598. plFiberPlate : 25 possible sky positions to use as objects from a possible 597. plFiberPlate : 13 possible sky positions to use as objects from a possible 596. plFiberPlate : 27 possible sky positions to use as objects from a possible 595. plFiberPlate : 51 possible sky positions to use as objects from a possible 594. plFiberPlate : 84 possible sky positions to use as objects from a possible 593. plFiberPlate : 48 possible sky positions to use as objects from a possible 592. plFiberPlate : 31 possible sky positions to use as objects from a possible 591. plFiberPlate : 25 possible sky positions to use as objects from a possible 590. plFiberPlate : 6 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 47 possible sky positions to use as objects from a possible 585. plFiberPlate : 79 possible sky positions to use as objects from a possible 584. plFiberPlate : 65 possible sky positions to use as objects from a possible 583. plFiberPlate : 55 possible sky positions to use as objects from a possible 582. plFiberPlate : 45 possible sky positions to use as objects from a possible 581. plFiberPlate : 22 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 20 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 45 possible sky positions to use as objects from a possible 576. plFiberPlate : 70 possible sky positions to use as objects from a possible 575. plFiberPlate : 48 possible sky positions to use as objects from a possible 574. plFiberPlate : 28 possible sky positions to use as objects from a possible 573. plFiberPlate : 33 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 22 possible sky positions to use as objects from a possible 570. plFiberPlate : 15 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1455.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1456.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1456.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1457.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 128 2 8 98 3 11 91 4 11 118 5 20 139 6 11 102 7 7 93 8 8 112 9 10 104 10 15 144 11 11 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 209 10 plFiberPlate : adding spectro-photo std with objId = 3698 40 5 215 3 plFiberPlate : adding spectro-photo std with objId = 3716 41 3 85 56 plFiberPlate : adding spectro-photo std with objId = 3716 41 3 77 45 plFiberPlate : adding spectro-photo std with objId = 3698 40 1 209 33 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 216 24 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 83 42 plFiberPlate : adding spectro-photo std with objId = 3698 40 5 209 17 plFiberPlate : 128 possible sky positions to use as objects from a possible 623. plFiberPlate : 76 possible sky positions to use as objects from a possible 622. plFiberPlate : 52 possible sky positions to use as objects from a possible 621. plFiberPlate : 25 possible sky positions to use as objects from a possible 620. plFiberPlate : 38 possible sky positions to use as objects from a possible 619. plFiberPlate : 33 possible sky positions to use as objects from a possible 618. plFiberPlate : 68 possible sky positions to use as objects from a possible 617. plFiberPlate : 73 possible sky positions to use as objects from a possible 616. plFiberPlate : 56 possible sky positions to use as objects from a possible 615. plFiberPlate : 36 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 11 possible sky positions to use as objects from a possible 612. plFiberPlate : 8 possible sky positions to use as objects from a possible 611. plFiberPlate : 7 possible sky positions to use as objects from a possible 610. plFiberPlate : 27 possible sky positions to use as objects from a possible 609. plFiberPlate : 35 possible sky positions to use as objects from a possible 608. plFiberPlate : 83 possible sky positions to use as objects from a possible 607. plFiberPlate : 49 possible sky positions to use as objects from a possible 606. plFiberPlate : 27 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 13 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 9 possible sky positions to use as objects from a possible 601. plFiberPlate : 12 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 48 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 7 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1456.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1457.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1457.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1458.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 120 2 5 59 3 6 53 4 12 91 5 11 128 6 8 93 7 11 82 8 19 96 9 11 94 10 13 133 11 7 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 1 229 54 plFiberPlate : adding spectro-photo std with objId = 3840 40 1 229 48 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 226 61 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 216 68 plFiberPlate : adding spectro-photo std with objId = 3893 40 4 217 59 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 223 8 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 228 73 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 234 25 plFiberPlate : 115 possible sky positions to use as objects from a possible 543. plFiberPlate : 59 possible sky positions to use as objects from a possible 542. plFiberPlate : 40 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 14 possible sky positions to use as objects from a possible 539. plFiberPlate : 31 possible sky positions to use as objects from a possible 538. plFiberPlate : 34 possible sky positions to use as objects from a possible 537. plFiberPlate : 66 possible sky positions to use as objects from a possible 536. plFiberPlate : 60 possible sky positions to use as objects from a possible 535. plFiberPlate : 41 possible sky positions to use as objects from a possible 534. plFiberPlate : 18 possible sky positions to use as objects from a possible 533. plFiberPlate : 19 possible sky positions to use as objects from a possible 532. plFiberPlate : 8 possible sky positions to use as objects from a possible 531. plFiberPlate : 8 possible sky positions to use as objects from a possible 530. plFiberPlate : 20 possible sky positions to use as objects from a possible 529. plFiberPlate : 18 possible sky positions to use as objects from a possible 528. plFiberPlate : 82 possible sky positions to use as objects from a possible 527. plFiberPlate : 48 possible sky positions to use as objects from a possible 526. plFiberPlate : 25 possible sky positions to use as objects from a possible 525. plFiberPlate : 13 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 8 possible sky positions to use as objects from a possible 522. plFiberPlate : 9 possible sky positions to use as objects from a possible 521. plFiberPlate : 7 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 52 possible sky positions to use as objects from a possible 518. plFiberPlate : 27 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 16 possible sky positions to use as objects from a possible 514. plFiberPlate : 11 possible sky positions to use as objects from a possible 513. plFiberPlate : 16 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1457.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1458.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1458.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1459.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 129 2 11 96 3 6 82 4 6 103 5 9 129 6 7 101 7 7 107 8 7 121 9 9 113 10 10 133 11 5 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 95 63 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 85 50 plFiberPlate : adding spectro-photo std with objId = 3698 40 5 215 3 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 97 51 plFiberPlate : adding spectro-photo std with objId = 3716 41 3 85 56 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 88 34 plFiberPlate : adding spectro-photo std with objId = 3698 40 6 216 24 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 226 86 plFiberPlate : 120 possible sky positions to use as objects from a possible 625. plFiberPlate : 70 possible sky positions to use as objects from a possible 624. plFiberPlate : 38 possible sky positions to use as objects from a possible 623. plFiberPlate : 14 possible sky positions to use as objects from a possible 622. plFiberPlate : 29 possible sky positions to use as objects from a possible 621. plFiberPlate : 17 possible sky positions to use as objects from a possible 620. plFiberPlate : 78 possible sky positions to use as objects from a possible 619. plFiberPlate : 87 possible sky positions to use as objects from a possible 618. plFiberPlate : 63 possible sky positions to use as objects from a possible 617. plFiberPlate : 37 possible sky positions to use as objects from a possible 616. plFiberPlate : 12 possible sky positions to use as objects from a possible 615. plFiberPlate : 5 possible sky positions to use as objects from a possible 614. plFiberPlate : 17 possible sky positions to use as objects from a possible 613. plFiberPlate : 15 possible sky positions to use as objects from a possible 612. plFiberPlate : 24 possible sky positions to use as objects from a possible 611. plFiberPlate : 33 possible sky positions to use as objects from a possible 610. plFiberPlate : 93 possible sky positions to use as objects from a possible 609. plFiberPlate : 50 possible sky positions to use as objects from a possible 608. plFiberPlate : 30 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 11 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 21 possible sky positions to use as objects from a possible 602. plFiberPlate : 17 possible sky positions to use as objects from a possible 601. plFiberPlate : 58 possible sky positions to use as objects from a possible 600. plFiberPlate : 50 possible sky positions to use as objects from a possible 599. plFiberPlate : 28 possible sky positions to use as objects from a possible 598. plFiberPlate : 25 possible sky positions to use as objects from a possible 597. plFiberPlate : 24 possible sky positions to use as objects from a possible 596. plFiberPlate : 30 possible sky positions to use as objects from a possible 595. plFiberPlate : 31 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1458.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1459.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1459.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1460.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 115 2 6 76 3 3 67 4 9 116 5 21 114 6 12 92 7 7 93 8 7 101 9 9 112 10 11 150 11 7 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 6 243 29 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 248 2 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 234 85 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 238 76 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 250 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 234 64 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 234 25 plFiberPlate : adding spectro-photo std with objId = 3840 40 6 242 6 plFiberPlate : 117 possible sky positions to use as objects from a possible 566. plFiberPlate : 77 possible sky positions to use as objects from a possible 565. plFiberPlate : 15 possible sky positions to use as objects from a possible 564. plFiberPlate : 25 possible sky positions to use as objects from a possible 563. plFiberPlate : 24 possible sky positions to use as objects from a possible 562. plFiberPlate : 19 possible sky positions to use as objects from a possible 561. plFiberPlate : 49 possible sky positions to use as objects from a possible 560. plFiberPlate : 88 possible sky positions to use as objects from a possible 559. plFiberPlate : 44 possible sky positions to use as objects from a possible 558. plFiberPlate : 23 possible sky positions to use as objects from a possible 557. plFiberPlate : 22 possible sky positions to use as objects from a possible 556. plFiberPlate : 1 possible sky positions to use as objects from a possible 555. plFiberPlate : 3 possible sky positions to use as objects from a possible 554. plFiberPlate : 5 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 66 possible sky positions to use as objects from a possible 550. plFiberPlate : 29 possible sky positions to use as objects from a possible 549. plFiberPlate : 24 possible sky positions to use as objects from a possible 548. plFiberPlate : 15 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 7 possible sky positions to use as objects from a possible 542. plFiberPlate : 48 possible sky positions to use as objects from a possible 541. plFiberPlate : 35 possible sky positions to use as objects from a possible 540. plFiberPlate : 31 possible sky positions to use as objects from a possible 539. plFiberPlate : 24 possible sky positions to use as objects from a possible 538. plFiberPlate : 13 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 8 possible sky positions to use as objects from a possible 535. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1459.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1460.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1460.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1461.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 126 2 1 98 3 7 97 4 7 104 5 8 124 6 13 100 7 10 95 8 11 111 9 9 106 10 5 153 11 4 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 102 12 plFiberPlate : adding spectro-photo std with objId = 3716 41 6 109 64 plFiberPlate : adding spectro-photo std with objId = 3699 40 1 88 19 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 97 51 plFiberPlate : adding spectro-photo std with objId = 3699 40 1 85 37 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 104 6 plFiberPlate : adding spectro-photo std with objId = 3698 40 3 226 86 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 111 40 plFiberPlate : 117 possible sky positions to use as objects from a possible 614. plFiberPlate : 86 possible sky positions to use as objects from a possible 613. plFiberPlate : 51 possible sky positions to use as objects from a possible 612. plFiberPlate : 24 possible sky positions to use as objects from a possible 611. plFiberPlate : 17 possible sky positions to use as objects from a possible 610. plFiberPlate : 17 possible sky positions to use as objects from a possible 609. plFiberPlate : 60 possible sky positions to use as objects from a possible 608. plFiberPlate : 82 possible sky positions to use as objects from a possible 607. plFiberPlate : 58 possible sky positions to use as objects from a possible 606. plFiberPlate : 55 possible sky positions to use as objects from a possible 605. plFiberPlate : 43 possible sky positions to use as objects from a possible 604. plFiberPlate : 24 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 23 possible sky positions to use as objects from a possible 601. plFiberPlate : 19 possible sky positions to use as objects from a possible 600. plFiberPlate : 48 possible sky positions to use as objects from a possible 599. plFiberPlate : 73 possible sky positions to use as objects from a possible 598. plFiberPlate : 64 possible sky positions to use as objects from a possible 597. plFiberPlate : 32 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 4 possible sky positions to use as objects from a possible 594. plFiberPlate : 4 possible sky positions to use as objects from a possible 593. plFiberPlate : 11 possible sky positions to use as objects from a possible 592. plFiberPlate : 25 possible sky positions to use as objects from a possible 591. plFiberPlate : 40 possible sky positions to use as objects from a possible 590. plFiberPlate : 54 possible sky positions to use as objects from a possible 589. plFiberPlate : 30 possible sky positions to use as objects from a possible 588. plFiberPlate : 22 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 20 possible sky positions to use as objects from a possible 584. plFiberPlate : 5 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1460.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1461.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1461.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1462.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 131 2 9 75 3 5 66 4 10 116 5 12 132 6 3 102 7 9 87 8 10 96 9 9 98 10 14 136 11 16 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 245 25 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 250 53 plFiberPlate : adding spectro-photo std with objId = 3893 40 2 248 2 plFiberPlate : adding spectro-photo std with objId = 3840 40 2 253 2 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 253 29 plFiberPlate : adding spectro-photo std with objId = 3840 40 4 257 6 plFiberPlate : adding spectro-photo std with objId = 3818 40 1 251 11 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 250 4 plFiberPlate : 117 possible sky positions to use as objects from a possible 584. plFiberPlate : 60 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 41 possible sky positions to use as objects from a possible 580. plFiberPlate : 25 possible sky positions to use as objects from a possible 579. plFiberPlate : 64 possible sky positions to use as objects from a possible 578. plFiberPlate : 74 possible sky positions to use as objects from a possible 577. plFiberPlate : 51 possible sky positions to use as objects from a possible 576. plFiberPlate : 24 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 17 possible sky positions to use as objects from a possible 570. plFiberPlate : 37 possible sky positions to use as objects from a possible 569. plFiberPlate : 71 possible sky positions to use as objects from a possible 568. plFiberPlate : 51 possible sky positions to use as objects from a possible 567. plFiberPlate : 12 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 18 possible sky positions to use as objects from a possible 564. plFiberPlate : 13 possible sky positions to use as objects from a possible 563. plFiberPlate : 6 possible sky positions to use as objects from a possible 562. plFiberPlate : 5 possible sky positions to use as objects from a possible 561. plFiberPlate : 22 possible sky positions to use as objects from a possible 560. plFiberPlate : 40 possible sky positions to use as objects from a possible 559. plFiberPlate : 35 possible sky positions to use as objects from a possible 558. plFiberPlate : 26 possible sky positions to use as objects from a possible 557. plFiberPlate : 22 possible sky positions to use as objects from a possible 556. plFiberPlate : 8 possible sky positions to use as objects from a possible 555. plFiberPlate : 8 possible sky positions to use as objects from a possible 554. plFiberPlate : 11 possible sky positions to use as objects from a possible 553. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1461.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1462.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1462.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1463.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 111 2 6 80 3 5 91 4 4 116 5 8 117 6 4 90 7 3 95 8 6 105 9 5 104 10 11 144 11 9 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 125 23 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 126 50 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 124 102 plFiberPlate : adding spectro-photo std with objId = 3699 40 5 105 59 plFiberPlate : adding spectro-photo std with objId = 3699 40 6 97 2 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 119 45 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 111 40 plFiberPlate : adding spectro-photo std with objId = 3699 40 3 105 41 plFiberPlate : 109 possible sky positions to use as objects from a possible 592. plFiberPlate : 81 possible sky positions to use as objects from a possible 591. plFiberPlate : 39 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 31 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 45 possible sky positions to use as objects from a possible 586. plFiberPlate : 96 possible sky positions to use as objects from a possible 585. plFiberPlate : 63 possible sky positions to use as objects from a possible 584. plFiberPlate : 31 possible sky positions to use as objects from a possible 583. plFiberPlate : 16 possible sky positions to use as objects from a possible 582. plFiberPlate : 6 possible sky positions to use as objects from a possible 581. plFiberPlate : 14 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 21 possible sky positions to use as objects from a possible 578. plFiberPlate : 24 possible sky positions to use as objects from a possible 577. plFiberPlate : 74 possible sky positions to use as objects from a possible 576. plFiberPlate : 54 possible sky positions to use as objects from a possible 575. plFiberPlate : 35 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 10 possible sky positions to use as objects from a possible 572. plFiberPlate : 13 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 17 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 47 possible sky positions to use as objects from a possible 567. plFiberPlate : 39 possible sky positions to use as objects from a possible 566. plFiberPlate : 27 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 17 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1462.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1463.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1463.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1464.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 91 2 5 67 3 0 59 4 4 103 5 11 128 6 7 90 7 5 80 8 6 91 9 7 105 10 9 141 11 9 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 3 at -121.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 275 24 plFiberPlate : adding spectro-photo std with objId = 3840 40 3 263 69 plFiberPlate : adding spectro-photo std with objId = 3893 40 1 267 7 plFiberPlate : adding spectro-photo std with objId = 3840 40 6 271 2 plFiberPlate : adding spectro-photo std with objId = 3893 40 3 271 74 plFiberPlate : adding spectro-photo std with objId = 3840 40 5 272 60 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 268 74 plFiberPlate : adding spectro-photo std with objId = 3893 40 5 275 47 plFiberPlate : 104 possible sky positions to use as objects from a possible 527. plFiberPlate : 46 possible sky positions to use as objects from a possible 526. plFiberPlate : 27 possible sky positions to use as objects from a possible 525. plFiberPlate : 40 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 19 possible sky positions to use as objects from a possible 522. plFiberPlate : 20 possible sky positions to use as objects from a possible 521. plFiberPlate : 83 possible sky positions to use as objects from a possible 520. plFiberPlate : 69 possible sky positions to use as objects from a possible 519. plFiberPlate : 45 possible sky positions to use as objects from a possible 518. plFiberPlate : 38 possible sky positions to use as objects from a possible 517. plFiberPlate : 27 possible sky positions to use as objects from a possible 516. plFiberPlate : 20 possible sky positions to use as objects from a possible 515. plFiberPlate : 13 possible sky positions to use as objects from a possible 514. plFiberPlate : 10 possible sky positions to use as objects from a possible 513. plFiberPlate : 32 possible sky positions to use as objects from a possible 512. plFiberPlate : 60 possible sky positions to use as objects from a possible 511. plFiberPlate : 37 possible sky positions to use as objects from a possible 510. plFiberPlate : 19 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 4 possible sky positions to use as objects from a possible 507. plFiberPlate : 4 possible sky positions to use as objects from a possible 506. plFiberPlate : 10 possible sky positions to use as objects from a possible 505. plFiberPlate : 8 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 60 possible sky positions to use as objects from a possible 502. plFiberPlate : 37 possible sky positions to use as objects from a possible 501. plFiberPlate : 24 possible sky positions to use as objects from a possible 500. plFiberPlate : 19 possible sky positions to use as objects from a possible 499. plFiberPlate : 5 possible sky positions to use as objects from a possible 498. plFiberPlate : 12 possible sky positions to use as objects from a possible 497. plFiberPlate : 16 possible sky positions to use as objects from a possible 496. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1463.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1464.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1464.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1465.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 113 2 9 90 3 6 94 4 6 110 5 11 123 6 4 88 7 9 99 8 15 109 9 17 100 10 19 145 11 10 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 126 50 plFiberPlate : adding spectro-photo std with objId = 3716 41 6 138 25 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 124 102 plFiberPlate : adding spectro-photo std with objId = 3699 40 6 115 56 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 134 175 plFiberPlate : adding spectro-photo std with objId = 3699 40 1 119 5 plFiberPlate : adding spectro-photo std with objId = 3699 40 4 123 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 129 34 plFiberPlate : 116 possible sky positions to use as objects from a possible 603. plFiberPlate : 70 possible sky positions to use as objects from a possible 602. plFiberPlate : 22 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 25 possible sky positions to use as objects from a possible 599. plFiberPlate : 21 possible sky positions to use as objects from a possible 598. plFiberPlate : 45 possible sky positions to use as objects from a possible 597. plFiberPlate : 81 possible sky positions to use as objects from a possible 596. plFiberPlate : 49 possible sky positions to use as objects from a possible 595. plFiberPlate : 41 possible sky positions to use as objects from a possible 594. plFiberPlate : 25 possible sky positions to use as objects from a possible 593. plFiberPlate : 19 possible sky positions to use as objects from a possible 592. plFiberPlate : 7 possible sky positions to use as objects from a possible 591. plFiberPlate : 11 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 29 possible sky positions to use as objects from a possible 588. plFiberPlate : 80 possible sky positions to use as objects from a possible 587. plFiberPlate : 38 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 22 possible sky positions to use as objects from a possible 583. plFiberPlate : 6 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 7 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 49 possible sky positions to use as objects from a possible 578. plFiberPlate : 39 possible sky positions to use as objects from a possible 577. plFiberPlate : 37 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 5 possible sky positions to use as objects from a possible 574. plFiberPlate : 36 possible sky positions to use as objects from a possible 573. plFiberPlate : 22 possible sky positions to use as objects from a possible 572. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1464.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1465.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1465.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1466.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 128 2 10 108 3 13 101 4 12 112 5 9 119 6 6 91 7 7 97 8 9 106 9 10 103 10 23 161 11 13 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3699 40 6 131 47 plFiberPlate : adding spectro-photo std with objId = 3716 41 6 151 30 plFiberPlate : adding spectro-photo std with objId = 3699 40 6 138 2 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 143 57 plFiberPlate : adding spectro-photo std with objId = 3699 40 3 127 55 plFiberPlate : adding spectro-photo std with objId = 3699 40 4 123 4 plFiberPlate : adding spectro-photo std with objId = 3699 40 1 134 51 plFiberPlate : adding spectro-photo std with objId = 3813 40 6 334 65 plFiberPlate : 126 possible sky positions to use as objects from a possible 609. plFiberPlate : 90 possible sky positions to use as objects from a possible 608. plFiberPlate : 56 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 23 possible sky positions to use as objects from a possible 605. plFiberPlate : 29 possible sky positions to use as objects from a possible 604. plFiberPlate : 81 possible sky positions to use as objects from a possible 603. plFiberPlate : 66 possible sky positions to use as objects from a possible 602. plFiberPlate : 39 possible sky positions to use as objects from a possible 601. plFiberPlate : 30 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 5 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 1 possible sky positions to use as objects from a possible 596. plFiberPlate : 4 possible sky positions to use as objects from a possible 595. plFiberPlate : 35 possible sky positions to use as objects from a possible 594. plFiberPlate : 70 possible sky positions to use as objects from a possible 593. plFiberPlate : 44 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 5 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 11 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 30 possible sky positions to use as objects from a possible 584. plFiberPlate : 24 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 11 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 8 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 664 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1465.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1466.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1466.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.07.3/plPlugMapP-1467.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 53 2 9 53 3 8 86 4 8 104 5 11 106 6 13 105 7 15 111 8 10 98 9 14 114 10 17 137 11 9 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3716 41 3 154 53 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 159 30 plFiberPlate : adding spectro-photo std with objId = 3716 41 2 158 46 plFiberPlate : adding spectro-photo std with objId = 3699 40 1 145 32 plFiberPlate : adding spectro-photo std with objId = 3716 41 4 168 9 plFiberPlate : adding spectro-photo std with objId = 3716 41 6 162 117 plFiberPlate : adding spectro-photo std with objId = 3716 41 1 166 51 plFiberPlate : adding spectro-photo std with objId = 3716 41 5 160 21 plFiberPlate : 124 possible sky positions to use as objects from a possible 512. plFiberPlate : 62 possible sky positions to use as objects from a possible 511. plFiberPlate : 38 possible sky positions to use as objects from a possible 510. plFiberPlate : 25 possible sky positions to use as objects from a possible 509. plFiberPlate : 18 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 15 possible sky positions to use as objects from a possible 506. plFiberPlate : 76 possible sky positions to use as objects from a possible 505. plFiberPlate : 56 possible sky positions to use as objects from a possible 504. plFiberPlate : 52 possible sky positions to use as objects from a possible 503. plFiberPlate : 33 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 14 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : 14 possible sky positions to use as objects from a possible 498. plFiberPlate : 9 possible sky positions to use as objects from a possible 497. plFiberPlate : 50 possible sky positions to use as objects from a possible 496. plFiberPlate : 58 possible sky positions to use as objects from a possible 495. plFiberPlate : 34 possible sky positions to use as objects from a possible 494. plFiberPlate : 25 possible sky positions to use as objects from a possible 493. plFiberPlate : 15 possible sky positions to use as objects from a possible 492. plFiberPlate : 12 possible sky positions to use as objects from a possible 491. plFiberPlate : 21 possible sky positions to use as objects from a possible 490. plFiberPlate : 13 possible sky positions to use as objects from a possible 489. plFiberPlate : 10 possible sky positions to use as objects from a possible 488. plFiberPlate : 43 possible sky positions to use as objects from a possible 487. plFiberPlate : 45 possible sky positions to use as objects from a possible 486. plFiberPlate : 42 possible sky positions to use as objects from a possible 485. plFiberPlate : 25 possible sky positions to use as objects from a possible 484. plFiberPlate : 35 possible sky positions to use as objects from a possible 483. plFiberPlate : 30 possible sky positions to use as objects from a possible 482. plFiberPlate : 28 possible sky positions to use as objects from a possible 481. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1466.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1467.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.07.3/plOverlay-1467.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Jul 2 13:45:52 CDT 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 42 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1426.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.7724,6.8782) and (-11.08,5.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1426.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1426.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1427.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1427.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1427.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1428.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.3076,-7.4591) and (-10.93,-6.02) plMakeFanucCodes : fixed path between (-12.4901,-2.7175) and (-12.71,-0.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1428.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1428.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1429.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1429.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1429.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1430.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1430.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1430.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1431.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7686,-6.9179) and (11.02,-6.52) plMakeFanucCodes : fixed path between (-12.4765,2.1666) and (-12.74,0.92) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1431.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1431.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1432.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1432.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1432.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1433.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0720,6.0809) and (12.36,2.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1433.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1433.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1434.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0569,-6.2991) and (11.74,-3.77) plMakeFanucCodes : fixed path between (5.0109,11.6441) and (2.88,12.03) plMakeFanucCodes : fixed path between (-10.4024,7.4464) and (-10.98,6.12) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1434.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1434.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1435.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.9100,9.0427) and (-6.57,10.70) plMakeFanucCodes : fixed path between (-6.5705,10.7040) and (-4.96,11.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1435.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1435.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1436.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1436.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1436.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1437.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1437.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1437.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1438.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.4072,-2.5942) and (-12.73,-1.31) plMakeFanucCodes : fixed path between (3.4446,-12.1146) and (1.47,-12.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1438.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1438.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1439.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.0881,9.8693) and (6.27,10.95) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1439.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1439.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1440.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3124,5.6512) and (11.79,3.69) plMakeFanucCodes : fixed path between (-11.1569,-6.0991) and (-11.67,-5.20) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1440.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.6988,10.2375) and (12.43,-2.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1440.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1441.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.6316,-12.1457) and (2.76,-12.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1441.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1441.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1442.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1442.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1442.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1443.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.5564,-9.5203) and (-6.56,-10.74) plMakeFanucCodes : fixed path between (4.9827,11.6764) and (3.48,12.11) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1443.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1443.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1444.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6747,4.9931) and (-12.10,3.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1444.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1444.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1445.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.8267,-4.6956) and (-12.40,-2.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1445.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1445.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1446.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.4987,-8.5450) and (10.21,-7.21) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1446.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.7819,8.8846) and (0.35,12.31) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1446.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1447.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6600,4.7230) and (-12.25,3.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1447.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1447.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1448.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1448.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1448.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1449.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1449.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1449.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1450.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2383,-5.6794) and (-11.86,-4.71) plMakeFanucCodes : fixed path between (-11.8625,-4.7102) and (-12.16,-3.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1450.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1450.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2278,-5.7789) and (-12.33,2.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1451.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1451.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1451.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1452.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1452.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1452.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1453.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1405,3.6112) and (12.61,1.91) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1453.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1453.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1454.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.1375,10.4156) and (4.57,11.29) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1454.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1454.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1455.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.6807,-5.1015) and (11.90,-3.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1455.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1455.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1456.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1456.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1456.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1457.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4273,-5.2893) and (12.00,-4.37) plMakeFanucCodes : fixed path between (-8.0246,-9.9729) and (-5.37,-10.50) plMakeFanucCodes : fixed path between (-5.1420,-11.4630) and (-3.99,-12.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1457.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1457.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1458.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.7607,-5.0577) and (-12.08,-4.10) plMakeFanucCodes : fixed path between (-7.0020,10.5226) and (-5.49,11.29) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1458.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1458.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1459.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1459.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1459.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1460.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.5547,10.1117) and (5.87,11.03) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1460.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1460.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1461.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.1665,-10.4997) and (-6.01,-11.15) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1461.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1461.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1462.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1462.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1462.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1463.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.9752,-7.9968) and (11.05,-6.14) plMakeFanucCodes : fixed path between (3.2200,11.9024) and (1.61,12.65) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1463.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1463.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1464.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1464.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1464.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1465.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1465.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1465.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 2 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 2 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1466.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1466.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1466.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1467.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1467.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.07.3/plFanuc-1467.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Jul 2 13:48:05 CDT 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140ec15e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 42 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1426 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1427 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1428 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1429 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1430 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1431 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1432 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1433 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1434 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1435 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1436 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1437 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1438 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1439 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1440 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1441 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1442 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1443 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1444 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1445 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1446 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1447 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1448 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1449 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1450 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1451 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1452 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1453 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1454 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1455 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1456 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1457 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1458 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1459 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1460 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1461 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1462 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1463 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1464 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1465 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1466 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 664 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1467 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Jul 2 13:49:17 CDT 2003 Begin running plateEnder dr2003.07.3 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_343/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_343/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.07.3 -morePipes 1 failed. PS: Read file for stderr output of this job.