Sender: LSF System Subject: Job 102800: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Sep 30 13:01:58 2003 Results reported at Tue Sep 30 13:03:12 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_76 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.10.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 64.19 sec. Max Memory : 10 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Tue Sep 30 13:01:58 CDT 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Sep 30 13:02:01 CDT 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_2/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v2_20/Linux:/fnal/ups/prd/ups/v4_6Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_0/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_1/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_76/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Tue Sep 30 13:02:01 CDT 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_76/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_2/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_1/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_yKz83T --------------------------------------------------------------- --------------------------------------------------------------- Tue Sep 30 13:02:01 CDT 2003 Begin running plate --------------------------------------------------------------- Tue Sep 30 13:02:01 CDT 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8b6f7cc makePlates : beginning loop over plObs chain; makePlates : making 8 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9473.par makePlates : plateInfo struct for plate 1629 : (h4).mjd 52987 (h4).raCen 51.63137 (h4).decCen -0.01181045 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 51.631 -0.012 51.631 1.488 plMakePlateFromTile : mjd of obs : 52987.683171 Observed HA/dec of plate center, fiducial point (deg) : 22.998 0.014 22.997 1.514 The rotation angle of the fid. point is -31.244123 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9480.par makePlates : plateInfo struct for plate 1630 : (h4).mjd 52987 (h4).raCen 52.99241 (h4).decCen -6.773609 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 52.992 -6.774 52.992 -5.274 plMakePlateFromTile : mjd of obs : 52987.684168 Observed HA/dec of plate center, fiducial point (deg) : 21.998 -6.745 21.998 -5.246 The rotation angle of the fid. point is -26.579773 plMakePlateFromTile : beginning loop over 1256 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9479.par makePlates : plateInfo struct for plate 1631 : (h4).mjd 52987 (h4).raCen 55.22597 (h4).decCen -6.508951 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 55.226 -6.509 55.226 -5.009 plMakePlateFromTile : mjd of obs : 52987.682042 Observed HA/dec of plate center, fiducial point (deg) : 18.998 -6.481 18.997 -4.982 The rotation angle of the fid. point is -23.549082 plMakePlateFromTile : beginning loop over 1226 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9474.par makePlates : plateInfo struct for plate 1632 : (h4).mjd 52987 (h4).raCen 55.49162 (h4).decCen 0.01375204 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 55.492 0.014 55.492 1.514 plMakePlateFromTile : mjd of obs : 52987.682781 Observed HA/dec of plate center, fiducial point (deg) : 18.998 0.038 18.997 1.538 The rotation angle of the fid. point is -26.827642 plMakePlateFromTile : beginning loop over 1181 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9475.par makePlates : plateInfo struct for plate 1633 : (h4).mjd 52987 (h4).raCen 57.4742 (h4).decCen -0.04059927 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 57.474 -0.041 57.474 1.459 plMakePlateFromTile : mjd of obs : 52987.682731 Observed HA/dec of plate center, fiducial point (deg) : 16.998 -0.017 16.997 1.483 The rotation angle of the fid. point is -24.393773 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9478.par makePlates : plateInfo struct for plate 1634 : (h4).mjd 52987 (h4).raCen 57.49633 (h4).decCen -6.042278 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 57.496 -6.042 57.496 -4.542 plMakePlateFromTile : mjd of obs : 52987.682789 Observed HA/dec of plate center, fiducial point (deg) : 16.998 -6.016 16.997 -4.516 The rotation angle of the fid. point is -21.528397 plMakePlateFromTile : beginning loop over 1246 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9477.par makePlates : plateInfo struct for plate 1635 : (h4).mjd 52987 (h4).raCen 59.74525 (h4).decCen -5.737596 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 59.745 -5.738 59.745 -4.238 plMakePlateFromTile : mjd of obs : 52987.725046 Observed HA/dec of plate center, fiducial point (deg) : 29.998 -5.710 29.998 -4.211 The rotation angle of the fid. point is -34.512828 plMakePlateFromTile : beginning loop over 1283 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapT-9476.par makePlates : plateInfo struct for plate 1636 : (h4).mjd 52987 (h4).raCen 62.03894 (h4).decCen -5.569426 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 62.039 -5.569 62.039 -4.069 plMakePlateFromTile : mjd of obs : 52987.723086 Observed HA/dec of plate center, fiducial point (deg) : 26.998 -5.543 26.998 -4.044 The rotation angle of the fid. point is -31.972582 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Sep 30 13:02:12 CDT 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 8 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1629.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 107 2 16 62 3 15 69 4 23 102 5 21 126 6 19 76 7 10 73 8 16 111 9 22 102 10 26 133 11 14 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 1 508 13 plFiberPlate : adding spectro-photo std with objId = 125 4 4 419 68 plFiberPlate : adding spectro-photo std with objId = 125 4 4 415 12 plFiberPlate : adding spectro-photo std with objId = 125 4 2 413 10 plFiberPlate : adding spectro-photo std with objId = 125 4 4 425 76 plFiberPlate : adding spectro-photo std with objId = 94 4 6 518 8 plFiberPlate : adding spectro-photo std with objId = 94 4 3 516 59 plFiberPlate : adding spectro-photo std with objId = 94 4 5 506 51 plFiberPlate : 113 possible sky positions to use as objects from a possible 529. plFiberPlate : 88 possible sky positions to use as objects from a possible 528. plFiberPlate : 51 possible sky positions to use as objects from a possible 527. plFiberPlate : 44 possible sky positions to use as objects from a possible 526. plFiberPlate : 25 possible sky positions to use as objects from a possible 525. plFiberPlate : 29 possible sky positions to use as objects from a possible 524. plFiberPlate : 35 possible sky positions to use as objects from a possible 523. plFiberPlate : 69 possible sky positions to use as objects from a possible 522. plFiberPlate : 52 possible sky positions to use as objects from a possible 521. plFiberPlate : 38 possible sky positions to use as objects from a possible 520. plFiberPlate : 21 possible sky positions to use as objects from a possible 519. plFiberPlate : 13 possible sky positions to use as objects from a possible 518. plFiberPlate : 6 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 15 possible sky positions to use as objects from a possible 515. plFiberPlate : 18 possible sky positions to use as objects from a possible 514. plFiberPlate : 74 possible sky positions to use as objects from a possible 513. plFiberPlate : 60 possible sky positions to use as objects from a possible 512. plFiberPlate : 47 possible sky positions to use as objects from a possible 511. plFiberPlate : 29 possible sky positions to use as objects from a possible 510. plFiberPlate : 16 possible sky positions to use as objects from a possible 509. plFiberPlate : 3 possible sky positions to use as objects from a possible 508. plFiberPlate : 10 possible sky positions to use as objects from a possible 507. plFiberPlate : 12 possible sky positions to use as objects from a possible 506. plFiberPlate : 23 possible sky positions to use as objects from a possible 505. plFiberPlate : 43 possible sky positions to use as objects from a possible 504. plFiberPlate : 34 possible sky positions to use as objects from a possible 503. plFiberPlate : 14 possible sky positions to use as objects from a possible 502. plFiberPlate : 12 possible sky positions to use as objects from a possible 501. plFiberPlate : 4 possible sky positions to use as objects from a possible 500. plFiberPlate : 9 possible sky positions to use as objects from a possible 499. plFiberPlate : 11 possible sky positions to use as objects from a possible 498. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1629.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1629.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1630.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 105 2 21 54 3 23 61 4 29 90 5 21 99 6 18 67 7 15 73 8 15 96 9 19 85 10 37 104 11 25 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1045 1 1 120 17 plFiberPlate : adding spectro-photo std with objId = 1045 1 5 132 11 plFiberPlate : adding spectro-photo std with objId = 1729 0 2 438 15 plFiberPlate : adding spectro-photo std with objId = 1729 0 5 430 24 plFiberPlate : adding spectro-photo std with objId = 1729 0 3 427 10 plFiberPlate : adding spectro-photo std with objId = 1729 0 4 425 38 plFiberPlate : adding spectro-photo std with objId = 1045 1 6 130 17 plFiberPlate : adding spectro-photo std with objId = 1045 1 4 128 55 plFiberPlate : 97 possible sky positions to use as objects from a possible 479. plFiberPlate : 60 possible sky positions to use as objects from a possible 478. plFiberPlate : 40 possible sky positions to use as objects from a possible 477. plFiberPlate : 18 possible sky positions to use as objects from a possible 476. plFiberPlate : 24 possible sky positions to use as objects from a possible 475. plFiberPlate : 24 possible sky positions to use as objects from a possible 474. plFiberPlate : 40 possible sky positions to use as objects from a possible 473. plFiberPlate : 53 possible sky positions to use as objects from a possible 472. plFiberPlate : 42 possible sky positions to use as objects from a possible 471. plFiberPlate : 19 possible sky positions to use as objects from a possible 470. plFiberPlate : 16 possible sky positions to use as objects from a possible 469. plFiberPlate : 7 possible sky positions to use as objects from a possible 468. plFiberPlate : 13 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 24 possible sky positions to use as objects from a possible 465. plFiberPlate : 17 possible sky positions to use as objects from a possible 464. plFiberPlate : 55 possible sky positions to use as objects from a possible 463. plFiberPlate : 40 possible sky positions to use as objects from a possible 462. plFiberPlate : 28 possible sky positions to use as objects from a possible 461. plFiberPlate : 6 possible sky positions to use as objects from a possible 460. plFiberPlate : 8 possible sky positions to use as objects from a possible 459. plFiberPlate : 8 possible sky positions to use as objects from a possible 458. plFiberPlate : 15 possible sky positions to use as objects from a possible 457. plFiberPlate : 12 possible sky positions to use as objects from a possible 456. plFiberPlate : 18 possible sky positions to use as objects from a possible 455. plFiberPlate : 39 possible sky positions to use as objects from a possible 454. plFiberPlate : 30 possible sky positions to use as objects from a possible 453. plFiberPlate : 16 possible sky positions to use as objects from a possible 452. plFiberPlate : 15 possible sky positions to use as objects from a possible 451. plFiberPlate : 7 possible sky positions to use as objects from a possible 450. plFiberPlate : 14 possible sky positions to use as objects from a possible 449. plFiberPlate : 12 possible sky positions to use as objects from a possible 448. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1629.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1630.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1630.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1631.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 90 2 11 50 3 11 68 4 20 103 5 15 111 6 13 71 7 14 73 8 19 80 9 21 88 10 24 119 11 15 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1729 0 5 453 31 plFiberPlate : adding spectro-photo std with objId = 1045 1 2 142 21 plFiberPlate : adding spectro-photo std with objId = 1729 0 4 440 40 plFiberPlate : adding spectro-photo std with objId = 1045 1 3 138 42 plFiberPlate : adding spectro-photo std with objId = 1729 0 4 449 20 plFiberPlate : adding spectro-photo std with objId = 1045 1 1 146 18 plFiberPlate : adding spectro-photo std with objId = 1045 1 6 138 12 plFiberPlate : adding spectro-photo std with objId = 1729 0 2 450 28 plFiberPlate : 114 possible sky positions to use as objects from a possible 476. plFiberPlate : 60 possible sky positions to use as objects from a possible 475. plFiberPlate : 30 possible sky positions to use as objects from a possible 474. plFiberPlate : 31 possible sky positions to use as objects from a possible 473. plFiberPlate : 11 possible sky positions to use as objects from a possible 472. plFiberPlate : 27 possible sky positions to use as objects from a possible 471. plFiberPlate : 24 possible sky positions to use as objects from a possible 470. plFiberPlate : 44 possible sky positions to use as objects from a possible 469. plFiberPlate : 48 possible sky positions to use as objects from a possible 468. plFiberPlate : 29 possible sky positions to use as objects from a possible 467. plFiberPlate : 16 possible sky positions to use as objects from a possible 466. plFiberPlate : 9 possible sky positions to use as objects from a possible 465. plFiberPlate : 16 possible sky positions to use as objects from a possible 464. plFiberPlate : 8 possible sky positions to use as objects from a possible 463. plFiberPlate : 4 possible sky positions to use as objects from a possible 462. plFiberPlate : 11 possible sky positions to use as objects from a possible 461. plFiberPlate : 68 possible sky positions to use as objects from a possible 460. plFiberPlate : 45 possible sky positions to use as objects from a possible 459. plFiberPlate : 31 possible sky positions to use as objects from a possible 458. plFiberPlate : 20 possible sky positions to use as objects from a possible 457. plFiberPlate : 19 possible sky positions to use as objects from a possible 456. plFiberPlate : 8 possible sky positions to use as objects from a possible 455. plFiberPlate : 6 possible sky positions to use as objects from a possible 454. plFiberPlate : 8 possible sky positions to use as objects from a possible 453. plFiberPlate : 19 possible sky positions to use as objects from a possible 452. plFiberPlate : 44 possible sky positions to use as objects from a possible 451. plFiberPlate : 21 possible sky positions to use as objects from a possible 450. plFiberPlate : 14 possible sky positions to use as objects from a possible 449. plFiberPlate : 11 possible sky positions to use as objects from a possible 448. plFiberPlate : 8 possible sky positions to use as objects from a possible 447. plFiberPlate : 18 possible sky positions to use as objects from a possible 446. plFiberPlate : 14 possible sky positions to use as objects from a possible 445. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1630.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1631.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1631.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1632.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 63 2 20 65 3 16 64 4 18 88 5 17 85 6 15 60 7 12 57 8 7 50 9 25 89 10 26 121 11 20 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 94 4 4 536 39 plFiberPlate : adding spectro-photo std with objId = 94 4 3 531 90 plFiberPlate : adding spectro-photo std with objId = 125 4 5 438 12 plFiberPlate : adding spectro-photo std with objId = 94 4 1 536 7 plFiberPlate : adding spectro-photo std with objId = 94 4 3 530 36 plFiberPlate : adding spectro-photo std with objId = 125 4 2 445 29 plFiberPlate : adding spectro-photo std with objId = 125 4 6 438 59 plFiberPlate : adding spectro-photo std with objId = 94 4 5 545 61 plFiberPlate : 96 possible sky positions to use as objects from a possible 387. plFiberPlate : 63 possible sky positions to use as objects from a possible 386. plFiberPlate : 36 possible sky positions to use as objects from a possible 385. plFiberPlate : 36 possible sky positions to use as objects from a possible 384. plFiberPlate : 18 possible sky positions to use as objects from a possible 383. plFiberPlate : 10 possible sky positions to use as objects from a possible 382. plFiberPlate : 23 possible sky positions to use as objects from a possible 381. plFiberPlate : 48 possible sky positions to use as objects from a possible 380. plFiberPlate : 30 possible sky positions to use as objects from a possible 379. plFiberPlate : 21 possible sky positions to use as objects from a possible 378. plFiberPlate : 15 possible sky positions to use as objects from a possible 377. plFiberPlate : 11 possible sky positions to use as objects from a possible 376. plFiberPlate : 8 possible sky positions to use as objects from a possible 375. plFiberPlate : 10 possible sky positions to use as objects from a possible 374. plFiberPlate : 16 possible sky positions to use as objects from a possible 373. plFiberPlate : 0 possible sky positions to use as objects from a possible 372. plFiberPlate: No sky found for bundle at 255.746 -39.046, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 372. plFiberPlate: No sky found for bundle at 255.746 -39.046, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 372. plFiberPlate : 48 possible sky positions to use as objects from a possible 371. plFiberPlate : 42 possible sky positions to use as objects from a possible 370. plFiberPlate : 27 possible sky positions to use as objects from a possible 369. plFiberPlate : 15 possible sky positions to use as objects from a possible 368. plFiberPlate : 9 possible sky positions to use as objects from a possible 367. plFiberPlate : 12 possible sky positions to use as objects from a possible 366. plFiberPlate : 12 possible sky positions to use as objects from a possible 365. plFiberPlate : 14 possible sky positions to use as objects from a possible 364. plFiberPlate : 0 possible sky positions to use as objects from a possible 363. plFiberPlate: No sky found for bundle at 264.756 89.203, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 363. plFiberPlate : 27 possible sky positions to use as objects from a possible 362. plFiberPlate : 23 possible sky positions to use as objects from a possible 361. plFiberPlate : 18 possible sky positions to use as objects from a possible 360. plFiberPlate : 11 possible sky positions to use as objects from a possible 359. plFiberPlate : 16 possible sky positions to use as objects from a possible 358. plFiberPlate : 6 possible sky positions to use as objects from a possible 357. plFiberPlate : 6 possible sky positions to use as objects from a possible 356. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1631.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1632.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1632.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1633.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 97 2 4 62 3 9 52 4 23 97 5 10 124 6 4 69 7 4 59 8 5 85 9 4 83 10 14 101 11 14 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 20 2 499 118 plFiberPlate : adding spectro-photo std with objId = 3325 20 6 497 56 plFiberPlate : adding spectro-photo std with objId = 3325 20 6 497 17 plFiberPlate : adding spectro-photo std with objId = 3325 20 2 496 125 plFiberPlate : adding spectro-photo std with objId = 3325 20 3 497 6 plFiberPlate : adding spectro-photo std with objId = 2738 20 3 299 58 plFiberPlate : adding spectro-photo std with objId = 3325 20 4 492 42 plFiberPlate : adding spectro-photo std with objId = 2738 20 4 304 82 plFiberPlate : 98 possible sky positions to use as objects from a possible 481. plFiberPlate : 50 possible sky positions to use as objects from a possible 480. plFiberPlate : 39 possible sky positions to use as objects from a possible 479. plFiberPlate : 13 possible sky positions to use as objects from a possible 478. plFiberPlate : 15 possible sky positions to use as objects from a possible 477. plFiberPlate : 22 possible sky positions to use as objects from a possible 476. plFiberPlate : 16 possible sky positions to use as objects from a possible 475. plFiberPlate : 67 possible sky positions to use as objects from a possible 474. plFiberPlate : 44 possible sky positions to use as objects from a possible 473. plFiberPlate : 33 possible sky positions to use as objects from a possible 472. plFiberPlate : 25 possible sky positions to use as objects from a possible 471. plFiberPlate : 10 possible sky positions to use as objects from a possible 470. plFiberPlate : 8 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 21 possible sky positions to use as objects from a possible 467. plFiberPlate : 19 possible sky positions to use as objects from a possible 466. plFiberPlate : 79 possible sky positions to use as objects from a possible 465. plFiberPlate : 35 possible sky positions to use as objects from a possible 464. plFiberPlate : 31 possible sky positions to use as objects from a possible 463. plFiberPlate : 20 possible sky positions to use as objects from a possible 462. plFiberPlate : 13 possible sky positions to use as objects from a possible 461. plFiberPlate : 9 possible sky positions to use as objects from a possible 460. plFiberPlate : 4 possible sky positions to use as objects from a possible 459. plFiberPlate : 4 possible sky positions to use as objects from a possible 458. plFiberPlate : 35 possible sky positions to use as objects from a possible 457. plFiberPlate : 27 possible sky positions to use as objects from a possible 456. plFiberPlate : 29 possible sky positions to use as objects from a possible 455. plFiberPlate : 15 possible sky positions to use as objects from a possible 454. plFiberPlate : 11 possible sky positions to use as objects from a possible 453. plFiberPlate : 7 possible sky positions to use as objects from a possible 452. plFiberPlate : 15 possible sky positions to use as objects from a possible 451. plFiberPlate : 11 possible sky positions to use as objects from a possible 450. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1632.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1633.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1633.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1634.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 89 2 6 63 3 8 76 4 12 89 5 25 100 6 13 53 7 10 62 8 21 108 9 21 96 10 18 115 11 15 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1045 1 1 160 17 plFiberPlate : adding spectro-photo std with objId = 1729 0 3 458 6 plFiberPlate : adding spectro-photo std with objId = 1045 1 1 161 62 plFiberPlate : adding spectro-photo std with objId = 1045 1 3 161 23 plFiberPlate : adding spectro-photo std with objId = 1045 1 4 161 46 plFiberPlate : adding spectro-photo std with objId = 1045 1 5 165 36 plFiberPlate : adding spectro-photo std with objId = 1729 0 6 463 28 plFiberPlate : adding spectro-photo std with objId = 1045 1 3 157 6 plFiberPlate : 94 possible sky positions to use as objects from a possible 472. plFiberPlate : 80 possible sky positions to use as objects from a possible 471. plFiberPlate : 55 possible sky positions to use as objects from a possible 470. plFiberPlate : 32 possible sky positions to use as objects from a possible 469. plFiberPlate : 23 possible sky positions to use as objects from a possible 468. plFiberPlate : 33 possible sky positions to use as objects from a possible 467. plFiberPlate : 27 possible sky positions to use as objects from a possible 466. plFiberPlate : 65 possible sky positions to use as objects from a possible 465. plFiberPlate : 58 possible sky positions to use as objects from a possible 464. plFiberPlate : 44 possible sky positions to use as objects from a possible 463. plFiberPlate : 25 possible sky positions to use as objects from a possible 462. plFiberPlate : 11 possible sky positions to use as objects from a possible 461. plFiberPlate : 14 possible sky positions to use as objects from a possible 460. plFiberPlate : 18 possible sky positions to use as objects from a possible 459. plFiberPlate : 9 possible sky positions to use as objects from a possible 458. plFiberPlate : 13 possible sky positions to use as objects from a possible 457. plFiberPlate : 84 possible sky positions to use as objects from a possible 456. plFiberPlate : 55 possible sky positions to use as objects from a possible 455. plFiberPlate : 28 possible sky positions to use as objects from a possible 454. plFiberPlate : 9 possible sky positions to use as objects from a possible 453. plFiberPlate : 7 possible sky positions to use as objects from a possible 452. plFiberPlate : 16 possible sky positions to use as objects from a possible 451. plFiberPlate : 8 possible sky positions to use as objects from a possible 450. plFiberPlate : 17 possible sky positions to use as objects from a possible 449. plFiberPlate : 22 possible sky positions to use as objects from a possible 448. plFiberPlate : 52 possible sky positions to use as objects from a possible 447. plFiberPlate : 38 possible sky positions to use as objects from a possible 446. plFiberPlate : 20 possible sky positions to use as objects from a possible 445. plFiberPlate : 16 possible sky positions to use as objects from a possible 444. plFiberPlate : 15 possible sky positions to use as objects from a possible 443. plFiberPlate : 15 possible sky positions to use as objects from a possible 442. plFiberPlate : 15 possible sky positions to use as objects from a possible 441. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1633.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1634.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1634.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1635.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 104 2 25 70 3 14 65 4 21 94 5 28 93 6 16 58 7 11 63 8 23 93 9 22 84 10 27 129 11 29 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1045 1 4 166 40 plFiberPlate : adding spectro-photo std with objId = 1045 1 2 180 75 plFiberPlate : adding spectro-photo std with objId = 1729 0 2 477 111 plFiberPlate : adding spectro-photo std with objId = 1045 1 2 173 50 plFiberPlate : adding spectro-photo std with objId = 1045 1 4 176 27 plFiberPlate : adding spectro-photo std with objId = 1729 0 1 474 38 plFiberPlate : adding spectro-photo std with objId = 1045 1 6 177 66 plFiberPlate : adding spectro-photo std with objId = 1045 1 5 179 27 plFiberPlate : 100 possible sky positions to use as objects from a possible 463. plFiberPlate : 74 possible sky positions to use as objects from a possible 462. plFiberPlate : 53 possible sky positions to use as objects from a possible 461. plFiberPlate : 33 possible sky positions to use as objects from a possible 460. plFiberPlate : 24 possible sky positions to use as objects from a possible 459. plFiberPlate : 34 possible sky positions to use as objects from a possible 458. plFiberPlate : 56 possible sky positions to use as objects from a possible 457. plFiberPlate : 65 possible sky positions to use as objects from a possible 456. plFiberPlate : 67 possible sky positions to use as objects from a possible 455. plFiberPlate : 46 possible sky positions to use as objects from a possible 454. plFiberPlate : 25 possible sky positions to use as objects from a possible 453. plFiberPlate : 16 possible sky positions to use as objects from a possible 452. plFiberPlate : 29 possible sky positions to use as objects from a possible 451. plFiberPlate : 14 possible sky positions to use as objects from a possible 450. plFiberPlate : 19 possible sky positions to use as objects from a possible 449. plFiberPlate : 14 possible sky positions to use as objects from a possible 448. plFiberPlate : 57 possible sky positions to use as objects from a possible 447. plFiberPlate : 34 possible sky positions to use as objects from a possible 446. plFiberPlate : 13 possible sky positions to use as objects from a possible 445. plFiberPlate : 6 possible sky positions to use as objects from a possible 444. plFiberPlate : 5 possible sky positions to use as objects from a possible 443. plFiberPlate : 13 possible sky positions to use as objects from a possible 442. plFiberPlate : 6 possible sky positions to use as objects from a possible 441. plFiberPlate : 8 possible sky positions to use as objects from a possible 440. plFiberPlate : 11 possible sky positions to use as objects from a possible 439. plFiberPlate : 47 possible sky positions to use as objects from a possible 438. plFiberPlate : 36 possible sky positions to use as objects from a possible 437. plFiberPlate : 21 possible sky positions to use as objects from a possible 436. plFiberPlate : 21 possible sky positions to use as objects from a possible 435. plFiberPlate : 20 possible sky positions to use as objects from a possible 434. plFiberPlate : 9 possible sky positions to use as objects from a possible 433. plFiberPlate : 17 possible sky positions to use as objects from a possible 432. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1634.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1635.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1635.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.10.3/plPlugMapP-1636.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 378 to list of science objects plFiberPlate : adding sky number 177 to list of science objects plFiberPlate : adding sky number 350 to list of science objects plFiberPlate : adding sky number 356 to list of science objects plFiberPlate : adding sky number 406 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 34 80 2 14 65 3 25 70 4 36 90 5 25 98 6 19 68 7 20 68 8 23 68 9 26 101 10 44 133 11 26 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1729 0 3 496 47 plFiberPlate : adding spectro-photo std with objId = 1045 1 4 186 31 plFiberPlate : adding spectro-photo std with objId = 1729 0 2 495 58 plFiberPlate : adding spectro-photo std with objId = 1045 1 6 184 6 plFiberPlate : adding spectro-photo std with objId = 1045 1 1 188 49 plFiberPlate : adding spectro-photo std with objId = 1045 1 4 186 64 plFiberPlate : adding spectro-photo std with objId = 1045 1 5 179 27 plFiberPlate : adding spectro-photo std with objId = 1045 1 2 183 8 plFiberPlate : 104 possible sky positions to use as objects from a possible 445. plFiberPlate : 78 possible sky positions to use as objects from a possible 444. plFiberPlate : 52 possible sky positions to use as objects from a possible 443. plFiberPlate : 29 possible sky positions to use as objects from a possible 442. plFiberPlate : 37 possible sky positions to use as objects from a possible 441. plFiberPlate : 25 possible sky positions to use as objects from a possible 440. plFiberPlate : 24 possible sky positions to use as objects from a possible 439. plFiberPlate : 56 possible sky positions to use as objects from a possible 438. plFiberPlate : 41 possible sky positions to use as objects from a possible 437. plFiberPlate : 31 possible sky positions to use as objects from a possible 436. plFiberPlate : 25 possible sky positions to use as objects from a possible 435. plFiberPlate : 14 possible sky positions to use as objects from a possible 434. plFiberPlate : 11 possible sky positions to use as objects from a possible 433. plFiberPlate : 8 possible sky positions to use as objects from a possible 432. plFiberPlate : 11 possible sky positions to use as objects from a possible 431. plFiberPlate : 15 possible sky positions to use as objects from a possible 430. plFiberPlate : 60 possible sky positions to use as objects from a possible 429. plFiberPlate : 50 possible sky positions to use as objects from a possible 428. plFiberPlate : 35 possible sky positions to use as objects from a possible 427. plFiberPlate : 21 possible sky positions to use as objects from a possible 426. plFiberPlate : 9 possible sky positions to use as objects from a possible 425. plFiberPlate : 10 possible sky positions to use as objects from a possible 424. plFiberPlate : 5 possible sky positions to use as objects from a possible 423. plFiberPlate : 9 possible sky positions to use as objects from a possible 422. plFiberPlate : 9 possible sky positions to use as objects from a possible 421. plFiberPlate : 55 possible sky positions to use as objects from a possible 420. plFiberPlate : 34 possible sky positions to use as objects from a possible 419. plFiberPlate : 16 possible sky positions to use as objects from a possible 418. plFiberPlate : 13 possible sky positions to use as objects from a possible 417. plFiberPlate : 17 possible sky positions to use as objects from a possible 416. plFiberPlate : 17 possible sky positions to use as objects from a possible 415. plFiberPlate : 24 possible sky positions to use as objects from a possible 414. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1635.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1636.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.10.3/plOverlay-1636.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Sep 30 13:02:24 CDT 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 8 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1629.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1629.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1629.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1630.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9618,-4.2487) and (12.25,-3.36) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1630.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1630.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1631.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1631.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1631.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1632.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1632.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1632.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1633.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.6743,6.8926) and (-11.30,5.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1633.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1633.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1634.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.6336,4.1172) and (12.51,2.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1634.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1634.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1635.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1635.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1635.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1636.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1636.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.10.3/plFanuc-1636.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Sep 30 13:02:46 CDT 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8b70c8c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 8 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1629 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1630 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1631 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1632 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1633 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1634 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1635 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1636 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Sep 30 13:02:53 CDT 2003 Begin running "plateEnder dr2003.10.3 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_76/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_76/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.10.3 -morePipes 1" failed. PS: Read file for stderr output of this job.