Sender: LSF System Subject: Job 107070: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Oct 30 11:11:09 2003 Results reported at Thu Oct 30 11:12:41 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_93 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.11.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 65.47 sec. Max Memory : 10 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Oct 30 11:11:11 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Oct 30 11:11:21 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_93/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Thu Oct 30 11:11:21 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_93/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_cO90Yv --------------------------------------------------------------- --------------------------------------------------------------- Thu Oct 30 11:11:21 CST 2003 Begin running plate --------------------------------------------------------------- Thu Oct 30 11:11:21 CST 2003 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8b76a2c makePlates : beginning loop over plObs chain; makePlates : making 7 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapT-9491.par makePlates : plateInfo struct for plate 1660 : (h4).mjd 52987 (h4).raCen 303.621 (h4).decCen 77.1789 (h4).haCen 45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 303.621 77.179 303.621 78.679 plMakePlateFromTile : mjd of obs : 52987.444797 Observed HA/dec of plate center, fiducial point (deg) : 45.000 77.181 45.003 78.680 The rotation angle of the fid. point is -127.726456 plMakePlateFromTile : beginning loop over 1639 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapT-9492.par makePlates : plateInfo struct for plate 1661 : (h4).mjd 52987 (h4).raCen 303.621 (h4).decCen 77.1789 (h4).haCen 45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 303.621 77.179 303.621 78.679 plMakePlateFromTile : mjd of obs : 52987.444797 Observed HA/dec of plate center, fiducial point (deg) : 45.000 77.181 45.003 78.680 The rotation angle of the fid. point is -127.726456 plMakePlateFromTile : beginning loop over 1609 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapT-9493.par makePlates : plateInfo struct for plate 1662 : (h4).mjd 52987 (h4).raCen 351.406 (h4).decCen 52.7304 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 351.406 52.730 351.406 54.230 plMakePlateFromTile : mjd of obs : 52987.494148 Observed HA/dec of plate center, fiducial point (deg) : 15.000 52.749 15.000 54.249 The rotation angle of the fid. point is -145.677746 plMakePlateFromTile : beginning loop over 2385 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapT-9494.par makePlates : plateInfo struct for plate 1663 : (h4).mjd 52987 (h4).raCen 351.406 (h4).decCen 52.7304 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 351.406 52.730 351.406 54.230 plMakePlateFromTile : mjd of obs : 52987.494148 Observed HA/dec of plate center, fiducial point (deg) : 15.000 52.749 15.000 54.249 The rotation angle of the fid. point is -145.677746 plMakePlateFromTile : beginning loop over 2369 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapT-9490.par makePlates : plateInfo struct for plate 1664 : (h4).mjd 52987 (h4).raCen 42 (h4).decCen 0 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 42.000 0.000 42.000 1.500 plMakePlateFromTile : mjd of obs : 52987.592755 Observed HA/dec of plate center, fiducial point (deg) : -0.002 0.028 -0.003 1.527 The rotation angle of the fid. point is 0.016407 plMakePlateFromTile : beginning loop over 1464 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapT-9488.par makePlates : plateInfo struct for plate 1665 : (h4).mjd 52987 (h4).raCen 49.96 (h4).decCen 41.53 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 49.960 41.530 49.960 43.030 plMakePlateFromTile : mjd of obs : 52987.614848 Observed HA/dec of plate center, fiducial point (deg) : -0.002 41.544 -0.003 43.044 The rotation angle of the fid. point is -179.988873 plMakePlateFromTile : beginning loop over 1315 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapT-9489.par makePlates : plateInfo struct for plate 1666 : (h4).mjd 52987 (h4).raCen 49.96 (h4).decCen 41.53 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 49.960 41.530 49.960 43.030 plMakePlateFromTile : mjd of obs : 52987.614848 Observed HA/dec of plate center, fiducial point (deg) : -0.002 41.544 -0.003 43.044 The rotation angle of the fid. point is -179.988873 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Oct 30 11:11:43 CST 2003 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 7 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapP-1660.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 646 to list of science objects plFiberPlate : adding sky number 302 to list of science objects plFiberPlate : adding sky number 600 to list of science objects plFiberPlate : adding sky number 611 to list of science objects plFiberPlate : adding sky number 697 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 54 165 2 39 121 3 23 91 4 30 147 5 41 163 6 22 124 7 22 89 8 36 126 9 38 136 10 59 207 11 45 148 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 101 214 plFiberPlate : adding spectro-photo std with objId = 4144 40 4 72 146 plFiberPlate : adding spectro-photo std with objId = 4144 40 5 71 472 plFiberPlate : adding spectro-photo std with objId = 4144 40 2 65 13 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 59 252 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 59 231 plFiberPlate : adding spectro-photo std with objId = 4144 40 5 58 123 plFiberPlate : adding spectro-photo std with objId = 4144 40 4 55 24 plFiberPlate : 153 possible sky positions to use as objects from a possible 764. plFiberPlate : 62 possible sky positions to use as objects from a possible 763. plFiberPlate : 42 possible sky positions to use as objects from a possible 762. plFiberPlate : 22 possible sky positions to use as objects from a possible 761. plFiberPlate : 38 possible sky positions to use as objects from a possible 760. plFiberPlate : 37 possible sky positions to use as objects from a possible 759. plFiberPlate : 62 possible sky positions to use as objects from a possible 758. plFiberPlate : 119 possible sky positions to use as objects from a possible 757. plFiberPlate : 83 possible sky positions to use as objects from a possible 756. plFiberPlate : 56 possible sky positions to use as objects from a possible 755. plFiberPlate : 33 possible sky positions to use as objects from a possible 754. plFiberPlate : 25 possible sky positions to use as objects from a possible 753. plFiberPlate : 23 possible sky positions to use as objects from a possible 752. plFiberPlate : 19 possible sky positions to use as objects from a possible 751. plFiberPlate : 13 possible sky positions to use as objects from a possible 750. plFiberPlate : 17 possible sky positions to use as objects from a possible 749. plFiberPlate : 93 possible sky positions to use as objects from a possible 748. plFiberPlate : 53 possible sky positions to use as objects from a possible 747. plFiberPlate : 20 possible sky positions to use as objects from a possible 746. plFiberPlate : 26 possible sky positions to use as objects from a possible 745. plFiberPlate : 20 possible sky positions to use as objects from a possible 744. plFiberPlate : 12 possible sky positions to use as objects from a possible 743. plFiberPlate : 20 possible sky positions to use as objects from a possible 742. plFiberPlate : 19 possible sky positions to use as objects from a possible 741. plFiberPlate : 13 possible sky positions to use as objects from a possible 740. plFiberPlate : 59 possible sky positions to use as objects from a possible 739. plFiberPlate : 58 possible sky positions to use as objects from a possible 738. plFiberPlate : 47 possible sky positions to use as objects from a possible 737. plFiberPlate : 20 possible sky positions to use as objects from a possible 736. plFiberPlate : 19 possible sky positions to use as objects from a possible 735. plFiberPlate : 25 possible sky positions to use as objects from a possible 734. plFiberPlate : 8 possible sky positions to use as objects from a possible 733. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 710 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1660.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1660.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapP-1661.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 584 to list of science objects plFiberPlate : adding sky number 211 to list of science objects plFiberPlate : adding sky number 420 to list of science objects plFiberPlate : adding sky number 361 to list of science objects plFiberPlate : adding sky number 476 to list of science objects plFiberPlate : adding sky number 275 to list of science objects plFiberPlate : adding sky number 387 to list of science objects plFiberPlate : adding sky number 717 to list of science objects plFiberPlate : adding sky number 689 to list of science objects plFiberPlate : adding sky number 478 to list of science objects plFiberPlate : adding sky number 538 to list of science objects plFiberPlate : adding sky number 106 to list of science objects plFiberPlate : adding sky number 454 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 181 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 599 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 48 157 2 33 117 3 21 93 4 29 142 5 43 155 6 24 120 7 19 92 8 31 123 9 38 139 10 56 206 11 41 145 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 101 214 plFiberPlate : adding spectro-photo std with objId = 4144 40 4 72 146 plFiberPlate : adding spectro-photo std with objId = 4144 40 4 72 122 plFiberPlate : adding spectro-photo std with objId = 4144 40 5 71 472 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 59 252 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 59 231 plFiberPlate : adding spectro-photo std with objId = 4144 40 5 58 123 plFiberPlate : adding spectro-photo std with objId = 4144 40 4 55 24 plFiberPlate : 162 possible sky positions to use as objects from a possible 744. plFiberPlate : 67 possible sky positions to use as objects from a possible 743. plFiberPlate : 38 possible sky positions to use as objects from a possible 742. plFiberPlate : 25 possible sky positions to use as objects from a possible 741. plFiberPlate : 28 possible sky positions to use as objects from a possible 740. plFiberPlate : 12 possible sky positions to use as objects from a possible 739. plFiberPlate : 73 possible sky positions to use as objects from a possible 738. plFiberPlate : 104 possible sky positions to use as objects from a possible 737. plFiberPlate : 84 possible sky positions to use as objects from a possible 736. plFiberPlate : 49 possible sky positions to use as objects from a possible 735. plFiberPlate : 25 possible sky positions to use as objects from a possible 734. plFiberPlate : 22 possible sky positions to use as objects from a possible 733. plFiberPlate : 16 possible sky positions to use as objects from a possible 732. plFiberPlate : 20 possible sky positions to use as objects from a possible 731. plFiberPlate : 17 possible sky positions to use as objects from a possible 730. plFiberPlate : 14 possible sky positions to use as objects from a possible 729. plFiberPlate : 81 possible sky positions to use as objects from a possible 728. plFiberPlate : 73 possible sky positions to use as objects from a possible 727. plFiberPlate : 38 possible sky positions to use as objects from a possible 726. plFiberPlate : 26 possible sky positions to use as objects from a possible 725. plFiberPlate : 12 possible sky positions to use as objects from a possible 724. plFiberPlate : 29 possible sky positions to use as objects from a possible 723. plFiberPlate : 17 possible sky positions to use as objects from a possible 722. plFiberPlate : 10 possible sky positions to use as objects from a possible 721. plFiberPlate : 4 possible sky positions to use as objects from a possible 720. plFiberPlate : 71 possible sky positions to use as objects from a possible 719. plFiberPlate : 49 possible sky positions to use as objects from a possible 718. plFiberPlate : 35 possible sky positions to use as objects from a possible 717. plFiberPlate : 18 possible sky positions to use as objects from a possible 716. plFiberPlate : 18 possible sky positions to use as objects from a possible 715. plFiberPlate : 19 possible sky positions to use as objects from a possible 714. plFiberPlate : 24 possible sky positions to use as objects from a possible 713. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 710 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1660.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1661.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1661.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapP-1662.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 237 to list of science objects plFiberPlate : adding sky number 606 to list of science objects plFiberPlate : adding sky number 196 to list of science objects plFiberPlate : adding sky number 164 to list of science objects plFiberPlate : adding sky number 1507 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 345 2 30 265 3 40 264 4 43 268 5 56 270 6 42 238 7 41 224 8 34 217 9 43 297 10 57 400 11 24 301 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 308 247 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 308 448 plFiberPlate : adding spectro-photo std with objId = 4134 40 5 301 1673 plFiberPlate : adding spectro-photo std with objId = 4135 40 2 120 439 plFiberPlate : adding spectro-photo std with objId = 4135 40 2 120 199 plFiberPlate : adding spectro-photo std with objId = 4135 40 2 109 3186 plFiberPlate : adding spectro-photo std with objId = 4135 40 1 108 1870 plFiberPlate : adding spectro-photo std with objId = 4135 40 3 106 1581 plFiberPlate : 334 possible sky positions to use as objects from a possible 1508. plFiberPlate : 221 possible sky positions to use as objects from a possible 1507. plFiberPlate : 138 possible sky positions to use as objects from a possible 1506. plFiberPlate : 100 possible sky positions to use as objects from a possible 1505. plFiberPlate : 112 possible sky positions to use as objects from a possible 1504. plFiberPlate : 77 possible sky positions to use as objects from a possible 1503. plFiberPlate : 137 possible sky positions to use as objects from a possible 1502. plFiberPlate : 181 possible sky positions to use as objects from a possible 1501. plFiberPlate : 128 possible sky positions to use as objects from a possible 1500. plFiberPlate : 109 possible sky positions to use as objects from a possible 1499. plFiberPlate : 68 possible sky positions to use as objects from a possible 1498. plFiberPlate : 46 possible sky positions to use as objects from a possible 1497. plFiberPlate : 49 possible sky positions to use as objects from a possible 1496. plFiberPlate : 70 possible sky positions to use as objects from a possible 1495. plFiberPlate : 41 possible sky positions to use as objects from a possible 1494. plFiberPlate : 60 possible sky positions to use as objects from a possible 1493. plFiberPlate : 146 possible sky positions to use as objects from a possible 1492. plFiberPlate : 107 possible sky positions to use as objects from a possible 1491. plFiberPlate : 74 possible sky positions to use as objects from a possible 1490. plFiberPlate : 43 possible sky positions to use as objects from a possible 1489. plFiberPlate : 46 possible sky positions to use as objects from a possible 1488. plFiberPlate : 40 possible sky positions to use as objects from a possible 1487. plFiberPlate : 40 possible sky positions to use as objects from a possible 1486. plFiberPlate : 21 possible sky positions to use as objects from a possible 1485. plFiberPlate : 23 possible sky positions to use as objects from a possible 1484. plFiberPlate : 77 possible sky positions to use as objects from a possible 1483. plFiberPlate : 77 possible sky positions to use as objects from a possible 1482. plFiberPlate : 67 possible sky positions to use as objects from a possible 1481. plFiberPlate : 57 possible sky positions to use as objects from a possible 1480. plFiberPlate : 19 possible sky positions to use as objects from a possible 1479. plFiberPlate : 24 possible sky positions to use as objects from a possible 1478. plFiberPlate : 30 possible sky positions to use as objects from a possible 1477. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 702 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1661.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1662.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1662.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapP-1663.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 330 to list of science objects plFiberPlate : adding sky number 775 to list of science objects plFiberPlate : adding sky number 1267 to list of science objects plFiberPlate : adding sky number 924 to list of science objects plFiberPlate : adding sky number 446 to list of science objects plFiberPlate : adding sky number 960 to list of science objects plFiberPlate : adding sky number 789 to list of science objects plFiberPlate : adding sky number 742 to list of science objects plFiberPlate : adding sky number 1463 to list of science objects plFiberPlate : adding sky number 439 to list of science objects plFiberPlate : adding sky number 1158 to list of science objects plFiberPlate : adding sky number 790 to list of science objects plFiberPlate : adding sky number 1154 to list of science objects plFiberPlate : adding sky number 599 to list of science objects plFiberPlate : adding sky number 1335 to list of science objects plFiberPlate : adding sky number 424 to list of science objects plFiberPlate : adding sky number 527 to list of science objects plFiberPlate : adding sky number 1207 to list of science objects plFiberPlate : adding sky number 1373 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : adding sky number 1416 to list of science objects plFiberPlate : adding sky number 784 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 286 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 328 2 28 271 3 39 261 4 43 259 5 57 264 6 45 232 7 40 228 8 34 216 9 43 291 10 59 393 11 24 295 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 308 247 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 308 448 plFiberPlate : adding spectro-photo std with objId = 4134 40 5 301 1673 plFiberPlate : adding spectro-photo std with objId = 4135 40 2 120 439 plFiberPlate : adding spectro-photo std with objId = 4135 40 2 120 199 plFiberPlate : adding spectro-photo std with objId = 4135 40 2 109 3186 plFiberPlate : adding spectro-photo std with objId = 4135 40 1 108 1870 plFiberPlate : adding spectro-photo std with objId = 4135 40 3 106 1581 plFiberPlate : 300 possible sky positions to use as objects from a possible 1488. plFiberPlate : 209 possible sky positions to use as objects from a possible 1487. plFiberPlate : 150 possible sky positions to use as objects from a possible 1486. plFiberPlate : 128 possible sky positions to use as objects from a possible 1485. plFiberPlate : 98 possible sky positions to use as objects from a possible 1484. plFiberPlate : 88 possible sky positions to use as objects from a possible 1483. plFiberPlate : 135 possible sky positions to use as objects from a possible 1482. plFiberPlate : 224 possible sky positions to use as objects from a possible 1481. plFiberPlate : 185 possible sky positions to use as objects from a possible 1480. plFiberPlate : 110 possible sky positions to use as objects from a possible 1479. plFiberPlate : 61 possible sky positions to use as objects from a possible 1478. plFiberPlate : 27 possible sky positions to use as objects from a possible 1477. plFiberPlate : 74 possible sky positions to use as objects from a possible 1476. plFiberPlate : 41 possible sky positions to use as objects from a possible 1475. plFiberPlate : 43 possible sky positions to use as objects from a possible 1474. plFiberPlate : 51 possible sky positions to use as objects from a possible 1473. plFiberPlate : 130 possible sky positions to use as objects from a possible 1472. plFiberPlate : 118 possible sky positions to use as objects from a possible 1471. plFiberPlate : 102 possible sky positions to use as objects from a possible 1470. plFiberPlate : 74 possible sky positions to use as objects from a possible 1469. plFiberPlate : 37 possible sky positions to use as objects from a possible 1468. plFiberPlate : 50 possible sky positions to use as objects from a possible 1467. plFiberPlate : 29 possible sky positions to use as objects from a possible 1466. plFiberPlate : 16 possible sky positions to use as objects from a possible 1465. plFiberPlate : 51 possible sky positions to use as objects from a possible 1464. plFiberPlate : 100 possible sky positions to use as objects from a possible 1463. plFiberPlate : 76 possible sky positions to use as objects from a possible 1462. plFiberPlate : 62 possible sky positions to use as objects from a possible 1461. plFiberPlate : 74 possible sky positions to use as objects from a possible 1460. plFiberPlate : 27 possible sky positions to use as objects from a possible 1459. plFiberPlate : 34 possible sky positions to use as objects from a possible 1458. plFiberPlate : 30 possible sky positions to use as objects from a possible 1457. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 702 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1662.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1663.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1663.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapP-1664.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 634 to list of science objects plFiberPlate : adding sky number 850 to list of science objects plFiberPlate : adding sky number 332 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 19 to list of science objects plFiberPlate : adding sky number 435 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 226 to list of science objects plFiberPlate : adding sky number 920 to list of science objects plFiberPlate : adding sky number 854 to list of science objects plFiberPlate : adding sky number 804 to list of science objects plFiberPlate : adding sky number 251 to list of science objects plFiberPlate : adding sky number 509 to list of science objects plFiberPlate : adding sky number 353 to list of science objects plFiberPlate : adding sky number 716 to list of science objects plFiberPlate : adding sky number 482 to list of science objects plFiberPlate : adding sky number 627 to list of science objects plFiberPlate : adding sky number 499 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 410 to list of science objects plFiberPlate : adding sky number 872 to list of science objects plFiberPlate : adding sky number 870 to list of science objects plFiberPlate : adding sky number 673 to list of science objects plFiberPlate : adding sky number 265 to list of science objects plFiberPlate : adding sky number 688 to list of science objects plFiberPlate : adding sky number 595 to list of science objects plFiberPlate : adding sky number 329 to list of science objects plFiberPlate : adding sky number 639 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : adding sky number 407 to list of science objects plFiberPlate : adding sky number 814 to list of science objects plFiberPlate : adding sky number 767 to list of science objects plFiberPlate : adding sky number 305 to list of science objects plFiberPlate : adding sky number 211 to list of science objects plFiberPlate : adding sky number 823 to list of science objects plFiberPlate : adding sky number 322 to list of science objects plFiberPlate : adding sky number 631 to list of science objects plFiberPlate : adding sky number 878 to list of science objects plFiberPlate : adding sky number 540 to list of science objects plFiberPlate : adding sky number 602 to list of science objects plFiberPlate : adding sky number 786 to list of science objects plFiberPlate : adding sky number 402 to list of science objects plFiberPlate : adding sky number 844 to list of science objects plFiberPlate : adding sky number 363 to list of science objects plFiberPlate : adding sky number 743 to list of science objects plFiberPlate : adding sky number 623 to list of science objects plFiberPlate : adding sky number 828 to list of science objects plFiberPlate : adding sky number 438 to list of science objects plFiberPlate : adding sky number 195 to list of science objects plFiberPlate : adding sky number 861 to list of science objects plFiberPlate : adding sky number 833 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 796 to list of science objects plFiberPlate : adding sky number 578 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 558 to list of science objects plFiberPlate : adding sky number 252 to list of science objects plFiberPlate : adding sky number 706 to list of science objects plFiberPlate : adding sky number 276 to list of science objects plFiberPlate : adding sky number 400 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 167 to list of science objects plFiberPlate : adding sky number 246 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : adding sky number 371 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 807 to list of science objects plFiberPlate : adding sky number 91 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 439 to list of science objects plFiberPlate : adding sky number 673 to list of science objects plFiberPlate : adding sky number 871 to list of science objects plFiberPlate : adding sky number 826 to list of science objects plFiberPlate : adding sky number 604 to list of science objects plFiberPlate : adding sky number 337 to list of science objects plFiberPlate : adding sky number 660 to list of science objects plFiberPlate : adding sky number 324 to list of science objects plFiberPlate : adding sky number 258 to list of science objects plFiberPlate : adding sky number 203 to list of science objects plFiberPlate : adding sky number 512 to list of science objects plFiberPlate : adding sky number 214 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 639 to list of science objects plFiberPlate : adding sky number 109 to list of science objects plFiberPlate : adding sky number 691 to list of science objects plFiberPlate : adding sky number 142 to list of science objects plFiberPlate : adding sky number 648 to list of science objects plFiberPlate : adding sky number 64 to list of science objects plFiberPlate : adding sky number 824 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 451 to list of science objects plFiberPlate : adding sky number 152 to list of science objects plFiberPlate : adding sky number 207 to list of science objects plFiberPlate : adding sky number 688 to list of science objects plFiberPlate : adding sky number 631 to list of science objects plFiberPlate : adding sky number 565 to list of science objects plFiberPlate : adding sky number 831 to list of science objects plFiberPlate : adding sky number 549 to list of science objects plFiberPlate : adding sky number 651 to list of science objects plFiberPlate : adding sky number 80 to list of science objects plFiberPlate : adding sky number 115 to list of science objects plFiberPlate : adding sky number 444 to list of science objects plFiberPlate : adding sky number 66 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 392 to list of science objects plFiberPlate : adding sky number 696 to list of science objects plFiberPlate : adding sky number 486 to list of science objects plFiberPlate : adding sky number 640 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 844 to list of science objects plFiberPlate : adding sky number 172 to list of science objects plFiberPlate : adding sky number 750 to list of science objects plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 839 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 730 to list of science objects plFiberPlate : adding sky number 60 to list of science objects plFiberPlate : adding sky number 3 to list of science objects plFiberPlate : adding sky number 771 to list of science objects plFiberPlate : adding sky number 495 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 325 to list of science objects plFiberPlate : adding sky number 758 to list of science objects plFiberPlate : adding sky number 680 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 457 to list of science objects plFiberPlate : adding sky number 479 to list of science objects plFiberPlate : adding sky number 373 to list of science objects plFiberPlate : adding sky number 567 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 436 to list of science objects plFiberPlate : adding sky number 622 to list of science objects plFiberPlate : adding sky number 249 to list of science objects plFiberPlate : adding sky number 813 to list of science objects plFiberPlate : adding sky number 472 to list of science objects plFiberPlate : adding sky number 717 to list of science objects plFiberPlate : adding sky number 610 to list of science objects plFiberPlate : adding sky number 513 to list of science objects plFiberPlate : adding sky number 28 to list of science objects plFiberPlate : adding sky number 608 to list of science objects plFiberPlate : adding sky number 677 to list of science objects plFiberPlate : adding sky number 751 to list of science objects plFiberPlate : adding sky number 708 to list of science objects plFiberPlate : adding sky number 673 to list of science objects plFiberPlate : adding sky number 792 to list of science objects plFiberPlate : adding sky number 600 to list of science objects plFiberPlate : adding sky number 729 to list of science objects plFiberPlate : adding sky number 792 to list of science objects plFiberPlate : adding sky number 536 to list of science objects plFiberPlate : adding sky number 399 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 665 to list of science objects plFiberPlate : adding sky number 712 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 519 to list of science objects plFiberPlate : adding sky number 197 to list of science objects plFiberPlate : adding sky number 501 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 556 to list of science objects plFiberPlate : adding sky number 251 to list of science objects plFiberPlate : adding sky number 260 to list of science objects plFiberPlate : adding sky number 183 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 500 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 158 2 4 113 3 6 110 4 6 154 5 3 171 6 2 114 7 2 108 8 3 148 9 3 164 10 10 211 11 4 154 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 41 5 390 60 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 380 23 plFiberPlate : adding spectro-photo std with objId = 2738 40 1 204 2 plFiberPlate : adding spectro-photo std with objId = 2738 40 6 195 70 plFiberPlate : adding spectro-photo std with objId = 2738 40 1 195 62 plFiberPlate : adding spectro-photo std with objId = 2738 40 3 192 88 plFiberPlate : adding spectro-photo std with objId = 2738 40 5 190 63 plFiberPlate : adding spectro-photo std with objId = 2738 40 2 190 30 plFiberPlate : 163 possible sky positions to use as objects from a possible 789. plFiberPlate : 119 possible sky positions to use as objects from a possible 788. plFiberPlate : 81 possible sky positions to use as objects from a possible 787. plFiberPlate : 67 possible sky positions to use as objects from a possible 786. plFiberPlate : 49 possible sky positions to use as objects from a possible 785. plFiberPlate : 49 possible sky positions to use as objects from a possible 784. plFiberPlate : 47 possible sky positions to use as objects from a possible 783. plFiberPlate : 111 possible sky positions to use as objects from a possible 782. plFiberPlate : 91 possible sky positions to use as objects from a possible 781. plFiberPlate : 55 possible sky positions to use as objects from a possible 780. plFiberPlate : 29 possible sky positions to use as objects from a possible 779. plFiberPlate : 21 possible sky positions to use as objects from a possible 778. plFiberPlate : 14 possible sky positions to use as objects from a possible 777. plFiberPlate : 26 possible sky positions to use as objects from a possible 776. plFiberPlate : 15 possible sky positions to use as objects from a possible 775. plFiberPlate : 21 possible sky positions to use as objects from a possible 774. plFiberPlate : 102 possible sky positions to use as objects from a possible 773. plFiberPlate : 63 possible sky positions to use as objects from a possible 772. plFiberPlate : 54 possible sky positions to use as objects from a possible 771. plFiberPlate : 21 possible sky positions to use as objects from a possible 770. plFiberPlate : 13 possible sky positions to use as objects from a possible 769. plFiberPlate : 19 possible sky positions to use as objects from a possible 768. plFiberPlate : 23 possible sky positions to use as objects from a possible 767. plFiberPlate : 16 possible sky positions to use as objects from a possible 766. plFiberPlate : 22 possible sky positions to use as objects from a possible 765. plFiberPlate : 74 possible sky positions to use as objects from a possible 764. plFiberPlate : 70 possible sky positions to use as objects from a possible 763. plFiberPlate : 44 possible sky positions to use as objects from a possible 762. plFiberPlate : 30 possible sky positions to use as objects from a possible 761. plFiberPlate : 31 possible sky positions to use as objects from a possible 760. plFiberPlate : 21 possible sky positions to use as objects from a possible 759. plFiberPlate : 15 possible sky positions to use as objects from a possible 758. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 685 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1663.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1664.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1664.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapP-1665.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 122 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 277 to list of science objects plFiberPlate : adding sky number 527 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 295 to list of science objects plFiberPlate : adding sky number 388 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 253 to list of science objects plFiberPlate : adding sky number 318 to list of science objects plFiberPlate : adding sky number 506 to list of science objects plFiberPlate : adding sky number 241 to list of science objects plFiberPlate : adding sky number 179 to list of science objects plFiberPlate : adding sky number 451 to list of science objects plFiberPlate : adding sky number 231 to list of science objects plFiberPlate : adding sky number 1 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 316 to list of science objects plFiberPlate : adding sky number 439 to list of science objects plFiberPlate : adding sky number 123 to list of science objects plFiberPlate : adding sky number 355 to list of science objects plFiberPlate : adding sky number 253 to list of science objects plFiberPlate : adding sky number 252 to list of science objects plFiberPlate : adding sky number 159 to list of science objects plFiberPlate : adding sky number 371 to list of science objects plFiberPlate : adding sky number 95 to list of science objects plFiberPlate : adding sky number 323 to list of science objects plFiberPlate : adding sky number 21 to list of science objects plFiberPlate : adding sky number 214 to list of science objects plFiberPlate : adding sky number 359 to list of science objects plFiberPlate : adding sky number 347 to list of science objects plFiberPlate : adding sky number 328 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 311 to list of science objects plFiberPlate : adding sky number 320 to list of science objects plFiberPlate : adding sky number 372 to list of science objects plFiberPlate : adding sky number 167 to list of science objects plFiberPlate : adding sky number 376 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 465 to list of science objects plFiberPlate : adding sky number 345 to list of science objects plFiberPlate : adding sky number 329 to list of science objects plFiberPlate : adding sky number 129 to list of science objects plFiberPlate : adding sky number 267 to list of science objects plFiberPlate : adding sky number 43 to list of science objects plFiberPlate : adding sky number 130 to list of science objects plFiberPlate : adding sky number 437 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 112 2 27 105 3 26 90 4 11 84 5 22 109 6 21 52 7 8 49 8 14 60 9 26 54 10 56 176 11 32 135 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3634 40 4 107 284 plFiberPlate : adding spectro-photo std with objId = 3634 40 3 107 640 plFiberPlate : adding spectro-photo std with objId = 3628 40 2 109 870 plFiberPlate : adding spectro-photo std with objId = 3628 40 2 108 281 plFiberPlate : adding spectro-photo std with objId = 3628 40 1 101 536 plFiberPlate : adding spectro-photo std with objId = 3628 40 2 100 404 plFiberPlate : adding spectro-photo std with objId = 3628 40 4 99 625 plFiberPlate : adding spectro-photo std with objId = 3628 40 3 97 547 plFiberPlate : 112 possible sky positions to use as objects from a possible 497. plFiberPlate : 84 possible sky positions to use as objects from a possible 496. plFiberPlate : 55 possible sky positions to use as objects from a possible 495. plFiberPlate : 40 possible sky positions to use as objects from a possible 494. plFiberPlate : 49 possible sky positions to use as objects from a possible 493. plFiberPlate : 25 possible sky positions to use as objects from a possible 492. plFiberPlate : 36 possible sky positions to use as objects from a possible 491. plFiberPlate : 55 possible sky positions to use as objects from a possible 490. plFiberPlate : 32 possible sky positions to use as objects from a possible 489. plFiberPlate : 23 possible sky positions to use as objects from a possible 488. plFiberPlate : 9 possible sky positions to use as objects from a possible 487. plFiberPlate : 7 possible sky positions to use as objects from a possible 486. plFiberPlate : 12 possible sky positions to use as objects from a possible 485. plFiberPlate : 12 possible sky positions to use as objects from a possible 484. plFiberPlate : 10 possible sky positions to use as objects from a possible 483. plFiberPlate : 21 possible sky positions to use as objects from a possible 482. plFiberPlate : 55 possible sky positions to use as objects from a possible 481. plFiberPlate : 46 possible sky positions to use as objects from a possible 480. plFiberPlate : 24 possible sky positions to use as objects from a possible 479. plFiberPlate : 23 possible sky positions to use as objects from a possible 478. plFiberPlate : 7 possible sky positions to use as objects from a possible 477. plFiberPlate : 3 possible sky positions to use as objects from a possible 476. plFiberPlate : 6 possible sky positions to use as objects from a possible 475. plFiberPlate : 3 possible sky positions to use as objects from a possible 474. plFiberPlate : 16 possible sky positions to use as objects from a possible 473. plFiberPlate : 30 possible sky positions to use as objects from a possible 472. plFiberPlate : 32 possible sky positions to use as objects from a possible 471. plFiberPlate : 14 possible sky positions to use as objects from a possible 470. plFiberPlate : 16 possible sky positions to use as objects from a possible 469. plFiberPlate : 5 possible sky positions to use as objects from a possible 468. plFiberPlate : 6 possible sky positions to use as objects from a possible 467. plFiberPlate : 17 possible sky positions to use as objects from a possible 466. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 699 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1664.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1665.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1665.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.11.4/plPlugMapP-1666.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 194 to list of science objects plFiberPlate : adding sky number 309 to list of science objects plFiberPlate : adding sky number 317 to list of science objects plFiberPlate : adding sky number 356 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : adding sky number 413 to list of science objects plFiberPlate : adding sky number 153 to list of science objects plFiberPlate : adding sky number 175 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 520 to list of science objects plFiberPlate : adding sky number 1 to list of science objects plFiberPlate : adding sky number 436 to list of science objects plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 501 to list of science objects plFiberPlate : adding sky number 479 to list of science objects plFiberPlate : adding sky number 398 to list of science objects plFiberPlate : adding sky number 363 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 355 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 399 to list of science objects plFiberPlate : adding sky number 485 to list of science objects plFiberPlate : adding sky number 470 to list of science objects plFiberPlate : adding sky number 442 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : adding sky number 405 to list of science objects plFiberPlate : adding sky number 279 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 459 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 110 2 27 105 3 26 94 4 11 92 5 22 111 6 21 55 7 8 50 8 14 61 9 26 56 10 56 178 11 32 130 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3634 40 4 107 284 plFiberPlate : adding spectro-photo std with objId = 3634 40 3 107 640 plFiberPlate : adding spectro-photo std with objId = 3628 40 2 109 870 plFiberPlate : adding spectro-photo std with objId = 3628 40 2 108 281 plFiberPlate : adding spectro-photo std with objId = 3628 40 1 101 536 plFiberPlate : adding spectro-photo std with objId = 3628 40 2 100 404 plFiberPlate : adding spectro-photo std with objId = 3628 40 4 99 625 plFiberPlate : adding spectro-photo std with objId = 3628 40 3 97 547 plFiberPlate : 110 possible sky positions to use as objects from a possible 507. plFiberPlate : 75 possible sky positions to use as objects from a possible 506. plFiberPlate : 50 possible sky positions to use as objects from a possible 505. plFiberPlate : 36 possible sky positions to use as objects from a possible 504. plFiberPlate : 27 possible sky positions to use as objects from a possible 503. plFiberPlate : 29 possible sky positions to use as objects from a possible 502. plFiberPlate : 26 possible sky positions to use as objects from a possible 501. plFiberPlate : 44 possible sky positions to use as objects from a possible 500. plFiberPlate : 38 possible sky positions to use as objects from a possible 499. plFiberPlate : 16 possible sky positions to use as objects from a possible 498. plFiberPlate : 8 possible sky positions to use as objects from a possible 497. plFiberPlate : 8 possible sky positions to use as objects from a possible 496. plFiberPlate : 12 possible sky positions to use as objects from a possible 495. plFiberPlate : 14 possible sky positions to use as objects from a possible 494. plFiberPlate : 17 possible sky positions to use as objects from a possible 493. plFiberPlate : 12 possible sky positions to use as objects from a possible 492. plFiberPlate : 68 possible sky positions to use as objects from a possible 491. plFiberPlate : 41 possible sky positions to use as objects from a possible 490. plFiberPlate : 29 possible sky positions to use as objects from a possible 489. plFiberPlate : 19 possible sky positions to use as objects from a possible 488. plFiberPlate : 7 possible sky positions to use as objects from a possible 487. plFiberPlate : 5 possible sky positions to use as objects from a possible 486. plFiberPlate : 5 possible sky positions to use as objects from a possible 485. plFiberPlate : 8 possible sky positions to use as objects from a possible 484. plFiberPlate : 3 possible sky positions to use as objects from a possible 483. plFiberPlate : 39 possible sky positions to use as objects from a possible 482. plFiberPlate : 24 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : 11 possible sky positions to use as objects from a possible 479. plFiberPlate : 9 possible sky positions to use as objects from a possible 478. plFiberPlate : 6 possible sky positions to use as objects from a possible 477. plFiberPlate : 26 possible sky positions to use as objects from a possible 476. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 699 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1665.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1666.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.11.4/plOverlay-1666.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Oct 30 11:11:56 CST 2003 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 7 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 48 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1660.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.0639,-9.9461) and (7.17,-10.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1660.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1660.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 48 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1661.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1661.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1661.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 40 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1662.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1662.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1662.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 40 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1663.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1663.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1663.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 23 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1664.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1664.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1664.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 37 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1665.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1665.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1665.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 37 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1666.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1666.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.11.4/plFanuc-1666.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Oct 30 11:12:16 CST 2003 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bba67c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 7 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1660 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 710 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1661 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 710 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1662 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 702 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1663 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 702 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1664 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 685 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1665 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 699 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1666 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 699 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Oct 30 11:12:22 CST 2003 Begin running "plateEnder dr2003.11.4 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_93/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_93/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2003.11.4 -morePipes 1" failed. PS: Read file for stderr output of this job.