Sender: LSF System Subject: Job 118788: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sun Feb 29 14:05:54 2004 Results reported at Sun Feb 29 14:07:28 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_166 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.03.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 40.48 sec. Max Memory : 10 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Sun Feb 29 14:05:59 CST 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sun Feb 29 14:06:08 CST 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86/bin:/sdss/ups/prd/gcc/v2_95_2/Linux-2-4/bin:/sdss/ups/prd/dddebugger/v3_1_2/Linux-2/bin:/sdss/ups/prd/gnuplot/v3_5/Linux-2/bin:/sdss/ups/prd/gdb/v4_17/Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/target/v5_8/Linux/bin:/sdss/ups/prd/sdb/v4_0/Linux/bin:/sdss/ups/prd/basicSch/v4_0/Linux/bin:/sdss/ups/prd/photoSch/v5_6/Linux/bin:/sdss/ups/prd/ts/v5_8/Linux/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_166/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Sun Feb 29 14:06:08 CST 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux BASICSCH_DIR=/sdss/ups/prd/basicSch/v4_0/Linux DDDEBUGGER_DIR=/sdss/ups/prd/dddebugger/v3_1_2/Linux-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_166/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GCC_DIR=/sdss/ups/prd/gcc/v2_95_2/Linux-2-4 GDB_DIR=/sdss/ups/prd/gdb/v4_17/Linux-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 GNUPLOT_DIR=/sdss/ups/prd/gnuplot/v3_5/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL OBJECTIVITY_DIR=/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTOSCH_DIR=/sdss/ups/prd/photoSch/v5_6/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDB_DIR=/sdss/ups/prd/sdb/v4_0/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TARGET_DIR=/sdss/ups/prd/target/v5_8/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TS_DIR=/sdss/ups/prd/ts/v5_8/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_jMslhj --------------------------------------------------------------- --------------------------------------------------------------- Sun Feb 29 14:06:08 CST 2004 Begin running plate --------------------------------------------------------------- Sun Feb 29 14:06:09 CST 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bd9094 makePlates : beginning loop over plObs chain; makePlates : making 5 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk91/complete//plPlugMapT-1261.par makePlates : plateInfo struct for plate 1756 : (h4).mjd 53134 (h4).raCen 122.2479 (h4).decCen 7.006981 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 122.248 7.007 122.248 8.507 plMakePlateFromTile : mjd of obs : 53134.408145 Observed HA/dec of plate center, fiducial point (deg) : -2.002 7.003 -2.003 8.503 The rotation angle of the fid. point is 3.884755 plMakePlateFromTile : beginning loop over 1044 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk91/complete//plPlugMapT-1262.par makePlates : plateInfo struct for plate 1757 : (h4).mjd 53134 (h4).raCen 124.4712 (h4).decCen 7.497458 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.471 7.497 124.471 8.997 plMakePlateFromTile : mjd of obs : 53134.408763 Observed HA/dec of plate center, fiducial point (deg) : -4.002 7.493 -4.003 8.993 The rotation angle of the fid. point is 7.838004 plMakePlateFromTile : beginning loop over 1175 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk91/complete//plPlugMapT-1263.par makePlates : plateInfo struct for plate 1758 : (h4).mjd 53134 (h4).raCen 126.9514 (h4).decCen 8.013529 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 126.951 8.014 126.951 9.514 plMakePlateFromTile : mjd of obs : 53134.410093 Observed HA/dec of plate center, fiducial point (deg) : -6.002 8.008 -6.003 9.508 The rotation angle of the fid. point is 11.852613 plMakePlateFromTile : beginning loop over 1156 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk91/complete//plPlugMapT-1264.par makePlates : plateInfo struct for plate 1759 : (h4).mjd 53134 (h4).raCen 129.6947 (h4).decCen 8.672706 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.695 8.673 129.695 10.173 plMakePlateFromTile : mjd of obs : 53134.409381 Observed HA/dec of plate center, fiducial point (deg) : -9.002 8.666 -9.003 10.166 The rotation angle of the fid. point is 17.805337 plMakePlateFromTile : beginning loop over 1203 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk91/complete//plPlugMapT-1265.par makePlates : plateInfo struct for plate 1760 : (h4).mjd 53134 (h4).raCen 132.3696 (h4).decCen 9.254323 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.370 9.254 132.370 10.754 plMakePlateFromTile : mjd of obs : 53134.408479 Observed HA/dec of plate center, fiducial point (deg) : -12.002 9.247 -12.003 10.747 The rotation angle of the fid. point is 23.512476 plMakePlateFromTile : beginning loop over 1216 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (241.86, -181.17, 7.7) and (242.29, -181.62, 8.3) checkLTHo : distance = 0.624, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(242.29, -181.62, 8.3) makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sun Feb 29 14:06:26 CST 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 5 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.1/plPlugMapP-1756.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 99 2 27 102 3 19 66 4 20 45 5 7 22 6 0 2 7 1 12 8 12 48 9 3 29 10 39 117 11 24 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4380 40 4 54 88 plFiberPlate : adding spectro-photo std with objId = 4380 40 4 56 279 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 46 183 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 46 266 plFiberPlate : adding spectro-photo std with objId = 4380 40 4 47 252 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 31 443 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 38 322 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 32 327 plFiberPlate : 48 possible sky positions to use as objects from a possible 284. plFiberPlate : 47 possible sky positions to use as objects from a possible 283. plFiberPlate : 40 possible sky positions to use as objects from a possible 282. plFiberPlate : 24 possible sky positions to use as objects from a possible 281. plFiberPlate : 14 possible sky positions to use as objects from a possible 280. plFiberPlate : 35 possible sky positions to use as objects from a possible 279. plFiberPlate : 58 possible sky positions to use as objects from a possible 278. plFiberPlate : 22 possible sky positions to use as objects from a possible 277. plFiberPlate : 17 possible sky positions to use as objects from a possible 276. plFiberPlate : 4 possible sky positions to use as objects from a possible 275. plFiberPlate : 0 possible sky positions to use as objects from a possible 274. plFiberPlate: No sky found for bundle at -35.656 -33.874, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 274. plFiberPlate: No sky found for bundle at -35.656 -33.874, increase box by 20 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 274. plFiberPlate : 4 possible sky positions to use as objects from a possible 273. plFiberPlate : 3 possible sky positions to use as objects from a possible 272. plFiberPlate : 3 possible sky positions to use as objects from a possible 271. plFiberPlate : 7 possible sky positions to use as objects from a possible 270. plFiberPlate : 4 possible sky positions to use as objects from a possible 269. plFiberPlate : 15 possible sky positions to use as objects from a possible 268. plFiberPlate : 11 possible sky positions to use as objects from a possible 267. plFiberPlate : 5 possible sky positions to use as objects from a possible 266. plFiberPlate : 5 possible sky positions to use as objects from a possible 265. plFiberPlate : 2 possible sky positions to use as objects from a possible 264. plFiberPlate : 1 possible sky positions to use as objects from a possible 263. plFiberPlate : 6 possible sky positions to use as objects from a possible 262. plFiberPlate : 5 possible sky positions to use as objects from a possible 261. plFiberPlate : 13 possible sky positions to use as objects from a possible 260. plFiberPlate : 7 possible sky positions to use as objects from a possible 259. plFiberPlate : 2 possible sky positions to use as objects from a possible 258. plFiberPlate : 1 possible sky positions to use as objects from a possible 257. plFiberPlate : 4 possible sky positions to use as objects from a possible 256. plFiberPlate : 7 possible sky positions to use as objects from a possible 255. plFiberPlate : 5 possible sky positions to use as objects from a possible 254. plFiberPlate : 5 possible sky positions to use as objects from a possible 253. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1756.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1756.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.1/plPlugMapP-1757.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 111 2 31 108 3 23 92 4 19 89 5 10 47 6 2 5 7 2 14 8 22 43 9 16 44 10 35 135 11 27 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4380 40 4 64 67 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 51 271 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 55 288 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 62 269 plFiberPlate : adding spectro-photo std with objId = 4380 40 4 66 415 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 64 269 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 68 396 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 61 273 plFiberPlate : 70 possible sky positions to use as objects from a possible 374. plFiberPlate : 66 possible sky positions to use as objects from a possible 373. plFiberPlate : 47 possible sky positions to use as objects from a possible 372. plFiberPlate : 58 possible sky positions to use as objects from a possible 371. plFiberPlate : 37 possible sky positions to use as objects from a possible 370. plFiberPlate : 44 possible sky positions to use as objects from a possible 369. plFiberPlate : 87 possible sky positions to use as objects from a possible 368. plFiberPlate : 28 possible sky positions to use as objects from a possible 367. plFiberPlate : 12 possible sky positions to use as objects from a possible 366. plFiberPlate : 6 possible sky positions to use as objects from a possible 365. plFiberPlate : 2 possible sky positions to use as objects from a possible 364. plFiberPlate : 7 possible sky positions to use as objects from a possible 363. plFiberPlate : 3 possible sky positions to use as objects from a possible 362. plFiberPlate : 2 possible sky positions to use as objects from a possible 361. plFiberPlate : 3 possible sky positions to use as objects from a possible 360. plFiberPlate : 9 possible sky positions to use as objects from a possible 359. plFiberPlate : 29 possible sky positions to use as objects from a possible 358. plFiberPlate : 17 possible sky positions to use as objects from a possible 357. plFiberPlate : 9 possible sky positions to use as objects from a possible 356. plFiberPlate : 4 possible sky positions to use as objects from a possible 355. plFiberPlate : 7 possible sky positions to use as objects from a possible 354. plFiberPlate : 4 possible sky positions to use as objects from a possible 353. plFiberPlate : 3 possible sky positions to use as objects from a possible 352. plFiberPlate : 1 possible sky positions to use as objects from a possible 351. plFiberPlate : 4 possible sky positions to use as objects from a possible 350. plFiberPlate : 12 possible sky positions to use as objects from a possible 349. plFiberPlate : 14 possible sky positions to use as objects from a possible 348. plFiberPlate : 9 possible sky positions to use as objects from a possible 347. plFiberPlate : 1 possible sky positions to use as objects from a possible 346. plFiberPlate : 1 possible sky positions to use as objects from a possible 345. plFiberPlate : 2 possible sky positions to use as objects from a possible 344. plFiberPlate : 8 possible sky positions to use as objects from a possible 343. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1756.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1757.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1757.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.1/plPlugMapP-1758.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 125 2 11 116 3 11 87 4 25 78 5 16 41 6 0 7 7 5 22 8 21 67 9 9 44 10 32 130 11 21 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 6 at -93.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3538 20 5 67 90 plFiberPlate : adding spectro-photo std with objId = 4380 40 5 83 156 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 70 10 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 65 356 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 77 8 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 61 273 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 71 188 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 79 75 plFiberPlate : 59 possible sky positions to use as objects from a possible 398. plFiberPlate : 76 possible sky positions to use as objects from a possible 397. plFiberPlate : 50 possible sky positions to use as objects from a possible 396. plFiberPlate : 60 possible sky positions to use as objects from a possible 395. plFiberPlate : 35 possible sky positions to use as objects from a possible 394. plFiberPlate : 12 possible sky positions to use as objects from a possible 393. plFiberPlate : 138 possible sky positions to use as objects from a possible 392. plFiberPlate : 39 possible sky positions to use as objects from a possible 391. plFiberPlate : 25 possible sky positions to use as objects from a possible 390. plFiberPlate : 17 possible sky positions to use as objects from a possible 389. plFiberPlate : 13 possible sky positions to use as objects from a possible 388. plFiberPlate : 4 possible sky positions to use as objects from a possible 387. plFiberPlate : 9 possible sky positions to use as objects from a possible 386. plFiberPlate : 7 possible sky positions to use as objects from a possible 385. plFiberPlate : 8 possible sky positions to use as objects from a possible 384. plFiberPlate : 4 possible sky positions to use as objects from a possible 383. plFiberPlate : 23 possible sky positions to use as objects from a possible 382. plFiberPlate : 20 possible sky positions to use as objects from a possible 381. plFiberPlate : 11 possible sky positions to use as objects from a possible 380. plFiberPlate : 9 possible sky positions to use as objects from a possible 379. plFiberPlate : 4 possible sky positions to use as objects from a possible 378. plFiberPlate : 5 possible sky positions to use as objects from a possible 377. plFiberPlate : 5 possible sky positions to use as objects from a possible 376. plFiberPlate : 11 possible sky positions to use as objects from a possible 375. plFiberPlate : 10 possible sky positions to use as objects from a possible 374. plFiberPlate : 8 possible sky positions to use as objects from a possible 373. plFiberPlate : 6 possible sky positions to use as objects from a possible 372. plFiberPlate : 2 possible sky positions to use as objects from a possible 371. plFiberPlate : 2 possible sky positions to use as objects from a possible 370. plFiberPlate : 6 possible sky positions to use as objects from a possible 369. plFiberPlate : 5 possible sky positions to use as objects from a possible 368. plFiberPlate : 7 possible sky positions to use as objects from a possible 367. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1757.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1758.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1758.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.1/plPlugMapP-1759.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 128 2 3 125 3 5 90 4 24 89 5 12 48 6 1 10 7 4 36 8 14 82 9 14 60 10 21 135 11 9 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 96 40 plFiberPlate : adding spectro-photo std with objId = 4380 40 5 98 18 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 87 43 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 89 99 plFiberPlate : adding spectro-photo std with objId = 4380 40 4 92 205 plFiberPlate : adding spectro-photo std with objId = 4380 40 2 91 107 plFiberPlate : adding spectro-photo std with objId = 4380 40 5 90 87 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 79 75 plFiberPlate : 71 possible sky positions to use as objects from a possible 436. plFiberPlate : 42 possible sky positions to use as objects from a possible 435. plFiberPlate : 34 possible sky positions to use as objects from a possible 434. plFiberPlate : 25 possible sky positions to use as objects from a possible 433. plFiberPlate : 49 possible sky positions to use as objects from a possible 432. plFiberPlate : 44 possible sky positions to use as objects from a possible 431. plFiberPlate : 46 possible sky positions to use as objects from a possible 430. plFiberPlate : 31 possible sky positions to use as objects from a possible 429. plFiberPlate : 22 possible sky positions to use as objects from a possible 428. plFiberPlate : 10 possible sky positions to use as objects from a possible 427. plFiberPlate : 4 possible sky positions to use as objects from a possible 426. plFiberPlate : 2 possible sky positions to use as objects from a possible 425. plFiberPlate : 7 possible sky positions to use as objects from a possible 424. plFiberPlate : 9 possible sky positions to use as objects from a possible 423. plFiberPlate : 7 possible sky positions to use as objects from a possible 422. plFiberPlate : 14 possible sky positions to use as objects from a possible 421. plFiberPlate : 33 possible sky positions to use as objects from a possible 420. plFiberPlate : 25 possible sky positions to use as objects from a possible 419. plFiberPlate : 23 possible sky positions to use as objects from a possible 418. plFiberPlate : 16 possible sky positions to use as objects from a possible 417. plFiberPlate : 10 possible sky positions to use as objects from a possible 416. plFiberPlate : 7 possible sky positions to use as objects from a possible 415. plFiberPlate : 7 possible sky positions to use as objects from a possible 414. plFiberPlate : 9 possible sky positions to use as objects from a possible 413. plFiberPlate : 12 possible sky positions to use as objects from a possible 412. plFiberPlate : 12 possible sky positions to use as objects from a possible 411. plFiberPlate : 10 possible sky positions to use as objects from a possible 410. plFiberPlate : 7 possible sky positions to use as objects from a possible 409. plFiberPlate : 5 possible sky positions to use as objects from a possible 408. plFiberPlate : 13 possible sky positions to use as objects from a possible 407. plFiberPlate : 16 possible sky positions to use as objects from a possible 406. plFiberPlate : 11 possible sky positions to use as objects from a possible 405. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1758.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1759.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1759.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.03.1/plPlugMapP-1760.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 124 2 7 113 3 5 100 4 13 107 5 17 44 6 7 11 7 3 38 8 14 88 9 18 50 10 14 137 11 11 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 111 180 plFiberPlate : adding spectro-photo std with objId = 4380 40 3 117 10 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 102 168 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 116 51 plFiberPlate : adding spectro-photo std with objId = 4380 40 5 111 54 plFiberPlate : adding spectro-photo std with objId = 4380 40 2 113 55 plFiberPlate : adding spectro-photo std with objId = 3630 20 4 103 65 plFiberPlate : adding spectro-photo std with objId = 4380 40 2 124 69 plFiberPlate : 108 possible sky positions to use as objects from a possible 453. plFiberPlate : 64 possible sky positions to use as objects from a possible 452. plFiberPlate : 60 possible sky positions to use as objects from a possible 451. plFiberPlate : 35 possible sky positions to use as objects from a possible 450. plFiberPlate : 19 possible sky positions to use as objects from a possible 449. plFiberPlate : 25 possible sky positions to use as objects from a possible 448. plFiberPlate : 70 possible sky positions to use as objects from a possible 447. plFiberPlate : 49 possible sky positions to use as objects from a possible 446. plFiberPlate : 22 possible sky positions to use as objects from a possible 445. plFiberPlate : 11 possible sky positions to use as objects from a possible 444. plFiberPlate : 6 possible sky positions to use as objects from a possible 443. plFiberPlate : 3 possible sky positions to use as objects from a possible 442. plFiberPlate : 4 possible sky positions to use as objects from a possible 441. plFiberPlate : 16 possible sky positions to use as objects from a possible 440. plFiberPlate : 11 possible sky positions to use as objects from a possible 439. plFiberPlate : 11 possible sky positions to use as objects from a possible 438. plFiberPlate : 31 possible sky positions to use as objects from a possible 437. plFiberPlate : 31 possible sky positions to use as objects from a possible 436. plFiberPlate : 18 possible sky positions to use as objects from a possible 435. plFiberPlate : 11 possible sky positions to use as objects from a possible 434. plFiberPlate : 6 possible sky positions to use as objects from a possible 433. plFiberPlate : 5 possible sky positions to use as objects from a possible 432. plFiberPlate : 6 possible sky positions to use as objects from a possible 431. plFiberPlate : 12 possible sky positions to use as objects from a possible 430. plFiberPlate : 14 possible sky positions to use as objects from a possible 429. plFiberPlate : 6 possible sky positions to use as objects from a possible 428. plFiberPlate : 6 possible sky positions to use as objects from a possible 427. plFiberPlate : 9 possible sky positions to use as objects from a possible 426. plFiberPlate : 10 possible sky positions to use as objects from a possible 425. plFiberPlate : 4 possible sky positions to use as objects from a possible 424. plFiberPlate : 13 possible sky positions to use as objects from a possible 423. plFiberPlate : 17 possible sky positions to use as objects from a possible 422. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1759.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1760.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.03.1/plOverlay-1760.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sun Feb 29 14:06:44 CST 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 5 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1756.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1756.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.3972,-6.0293) and (12.47,-1.61) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1756.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1757.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1757.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1757.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1758.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1758.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1758.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1759.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1759.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1759.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1760.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1760.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.9920,7.1224) and (-12.26,0.76) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.03.1/plFanuc-1760.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Sun Feb 29 14:07:00 CST 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bd8efc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 5 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1756 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1757 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1758 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1759 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1760 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sun Feb 29 14:07:12 CST 2004 Begin running "plateEnder dr2004.03.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_166/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_166/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.03.1 -morePipes 1" failed. PS: Read file for stderr output of this job.