Sender: LSF System Subject: Job 122081: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Mar 29 11:56:07 2004 Results reported at Mon Mar 29 12:05:50 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_183 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.04.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 285.22 sec. Max Memory : 12 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Mar 29 11:56:10 CST 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Mar 29 11:56:17 CST 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_183/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Mon Mar 29 11:56:17 CST 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_183/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_chxAxk --------------------------------------------------------------- --------------------------------------------------------------- Mon Mar 29 11:56:17 CST 2004 Begin running plate --------------------------------------------------------------- Mon Mar 29 11:56:17 CST 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_183/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_183/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8be2fac makePlates : beginning loop over plObs chain; makePlates : making 35 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1310.par makePlates : plateInfo struct for plate 1789 : (h4).mjd 53143 (h4).raCen 191.1699 (h4).decCen 9.907189 (h4).haCen 33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.170 9.907 191.170 11.407 plMakePlateFromTile : mjd of obs : 53143.671492 Observed HA/dec of plate center, fiducial point (deg) : 32.998 9.892 32.998 11.392 The rotation angle of the fid. point is -48.008845 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1335.par makePlates : plateInfo struct for plate 1790 : (h4).mjd 53143 (h4).raCen 191.4369 (h4).decCen 7.323552 (h4).haCen 33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.437 7.324 191.437 8.824 plMakePlateFromTile : mjd of obs : 53143.672232 Observed HA/dec of plate center, fiducial point (deg) : 32.998 7.309 32.998 8.809 The rotation angle of the fid. point is -45.676120 plMakePlateFromTile : beginning loop over 1344 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1311.par makePlates : plateInfo struct for plate 1791 : (h4).mjd 53143 (h4).raCen 193.2958 (h4).decCen 9.930328 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.296 9.930 193.296 11.430 plMakePlateFromTile : mjd of obs : 53143.671838 Observed HA/dec of plate center, fiducial point (deg) : 30.998 9.915 30.998 11.415 The rotation angle of the fid. point is -46.621761 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1336.par makePlates : plateInfo struct for plate 1792 : (h4).mjd 53143 (h4).raCen 193.6424 (h4).decCen 7.42929 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 193.642 7.429 193.642 8.929 plMakePlateFromTile : mjd of obs : 53143.672799 Observed HA/dec of plate center, fiducial point (deg) : 30.998 7.415 30.998 8.915 The rotation angle of the fid. point is -44.295686 plMakePlateFromTile : beginning loop over 1374 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1312.par makePlates : plateInfo struct for plate 1793 : (h4).mjd 53143 (h4).raCen 195.4505 (h4).decCen 9.889096 (h4).haCen 29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.451 9.889 195.451 11.389 plMakePlateFromTile : mjd of obs : 53143.672265 Observed HA/dec of plate center, fiducial point (deg) : 28.998 9.874 28.998 11.374 The rotation angle of the fid. point is -45.026195 plMakePlateFromTile : beginning loop over 1363 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1337.par makePlates : plateInfo struct for plate 1794 : (h4).mjd 53143 (h4).raCen 195.5561 (h4).decCen 7.331609 (h4).haCen 29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.556 7.332 195.556 8.832 plMakePlateFromTile : mjd of obs : 53143.672559 Observed HA/dec of plate center, fiducial point (deg) : 28.998 7.317 28.998 8.817 The rotation angle of the fid. point is -42.600230 plMakePlateFromTile : beginning loop over 1359 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1338.par makePlates : plateInfo struct for plate 1795 : (h4).mjd 53143 (h4).raCen 197.4096 (h4).decCen 7.392676 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.410 7.393 197.410 8.893 plMakePlateFromTile : mjd of obs : 53143.672151 Observed HA/dec of plate center, fiducial point (deg) : 26.998 7.378 26.998 8.878 The rotation angle of the fid. point is -40.899859 plMakePlateFromTile : beginning loop over 1361 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1313.par makePlates : plateInfo struct for plate 1796 : (h4).mjd 53143 (h4).raCen 197.6084 (h4).decCen 9.870084 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.608 9.870 197.608 11.370 plMakePlateFromTile : mjd of obs : 53143.672701 Observed HA/dec of plate center, fiducial point (deg) : 26.998 9.855 26.998 11.355 The rotation angle of the fid. point is -43.293138 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1339.par makePlates : plateInfo struct for plate 1797 : (h4).mjd 53143 (h4).raCen 199.2617 (h4).decCen 7.322478 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.262 7.322 199.262 8.822 plMakePlateFromTile : mjd of obs : 53143.671739 Observed HA/dec of plate center, fiducial point (deg) : 24.998 7.308 24.998 8.808 The rotation angle of the fid. point is -38.922537 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1314.par makePlates : plateInfo struct for plate 1798 : (h4).mjd 53143 (h4).raCen 199.7055 (h4).decCen 9.678367 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.706 9.678 199.706 11.178 plMakePlateFromTile : mjd of obs : 53143.672968 Observed HA/dec of plate center, fiducial point (deg) : 24.998 9.663 24.998 11.163 The rotation angle of the fid. point is -41.208714 plMakePlateFromTile : beginning loop over 1349 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1340.par makePlates : plateInfo struct for plate 1799 : (h4).mjd 53143 (h4).raCen 201.433 (h4).decCen 7.169742 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 201.433 7.170 201.433 8.670 plMakePlateFromTile : mjd of obs : 53143.672212 Observed HA/dec of plate center, fiducial point (deg) : 22.998 7.155 22.998 8.655 The rotation angle of the fid. point is -36.701978 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1315.par makePlates : plateInfo struct for plate 1800 : (h4).mjd 53143 (h4).raCen 201.8021 (h4).decCen 9.644352 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 201.802 9.644 201.802 11.144 plMakePlateFromTile : mjd of obs : 53143.673234 Observed HA/dec of plate center, fiducial point (deg) : 22.998 9.629 22.998 11.129 The rotation angle of the fid. point is -39.098717 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1341.par makePlates : plateInfo struct for plate 1801 : (h4).mjd 53143 (h4).raCen 203.7026 (h4).decCen 7.099553 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.703 7.100 203.703 8.600 plMakePlateFromTile : mjd of obs : 53143.672958 Observed HA/dec of plate center, fiducial point (deg) : 20.998 7.085 20.998 8.585 The rotation angle of the fid. point is -34.380833 plMakePlateFromTile : beginning loop over 1352 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1316.par makePlates : plateInfo struct for plate 1802 : (h4).mjd 53143 (h4).raCen 203.9849 (h4).decCen 9.455003 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.985 9.455 203.985 10.955 plMakePlateFromTile : mjd of obs : 53143.673739 Observed HA/dec of plate center, fiducial point (deg) : 20.998 9.440 20.998 10.940 The rotation angle of the fid. point is -36.630204 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1342.par makePlates : plateInfo struct for plate 1803 : (h4).mjd 53143 (h4).raCen 205.9974 (h4).decCen 6.891369 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.997 6.891 205.997 8.391 plMakePlateFromTile : mjd of obs : 53143.673773 Observed HA/dec of plate center, fiducial point (deg) : 18.998 6.877 18.998 8.377 The rotation angle of the fid. point is -31.757324 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1317.par makePlates : plateInfo struct for plate 1804 : (h4).mjd 53143 (h4).raCen 206.1306 (h4).decCen 9.314523 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 206.131 9.315 206.131 10.815 plMakePlateFromTile : mjd of obs : 53143.671370 Observed HA/dec of plate center, fiducial point (deg) : 17.998 9.300 17.998 10.799 The rotation angle of the fid. point is -32.681120 plMakePlateFromTile : beginning loop over 1352 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1343.par makePlates : plateInfo struct for plate 1805 : (h4).mjd 53143 (h4).raCen 208.1493 (h4).decCen 6.982351 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 208.149 6.982 208.149 8.482 plMakePlateFromTile : mjd of obs : 53143.712987 Observed HA/dec of plate center, fiducial point (deg) : 30.998 6.970 30.998 8.469 The rotation angle of the fid. point is -43.911627 plMakePlateFromTile : beginning loop over 1353 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1318.par makePlates : plateInfo struct for plate 1806 : (h4).mjd 53143 (h4).raCen 208.2462 (h4).decCen 9.216546 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 208.246 9.217 208.246 10.717 plMakePlateFromTile : mjd of obs : 53143.713254 Observed HA/dec of plate center, fiducial point (deg) : 30.998 9.203 30.998 10.703 The rotation angle of the fid. point is -45.940257 plMakePlateFromTile : beginning loop over 1360 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1319.par makePlates : plateInfo struct for plate 1807 : (h4).mjd 53143 (h4).raCen 209.8866 (h4).decCen 9.005332 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 209.887 9.005 209.887 10.505 plMakePlateFromTile : mjd of obs : 53143.715027 Observed HA/dec of plate center, fiducial point (deg) : 29.998 8.992 29.998 10.492 The rotation angle of the fid. point is -44.971100 plMakePlateFromTile : beginning loop over 1365 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1344.par makePlates : plateInfo struct for plate 1808 : (h4).mjd 53143 (h4).raCen 210.1063 (h4).decCen 6.844907 (h4).haCen 29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 210.106 6.845 210.106 8.345 plMakePlateFromTile : mjd of obs : 53143.712866 Observed HA/dec of plate center, fiducial point (deg) : 28.998 6.832 28.998 8.332 The rotation angle of the fid. point is -42.175509 plMakePlateFromTile : beginning loop over 1345 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1320.par makePlates : plateInfo struct for plate 1809 : (h4).mjd 53143 (h4).raCen 211.6047 (h4).decCen 8.97287 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 211.605 8.973 211.605 10.473 plMakePlateFromTile : mjd of obs : 53143.714244 Observed HA/dec of plate center, fiducial point (deg) : 27.998 8.960 27.998 10.459 The rotation angle of the fid. point is -43.287601 plMakePlateFromTile : beginning loop over 1348 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1321.par makePlates : plateInfo struct for plate 1810 : (h4).mjd 53143 (h4).raCen 213.3752 (h4).decCen 8.830509 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 213.375 8.831 213.375 10.331 plMakePlateFromTile : mjd of obs : 53143.713607 Observed HA/dec of plate center, fiducial point (deg) : 25.998 8.818 25.998 10.317 The rotation angle of the fid. point is -41.334309 plMakePlateFromTile : beginning loop over 1367 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1322.par makePlates : plateInfo struct for plate 1811 : (h4).mjd 53143 (h4).raCen 215.4046 (h4).decCen 8.851043 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 215.405 8.851 215.405 10.351 plMakePlateFromTile : mjd of obs : 53143.713686 Observed HA/dec of plate center, fiducial point (deg) : 23.998 8.838 23.998 10.338 The rotation angle of the fid. point is -39.366711 plMakePlateFromTile : beginning loop over 1362 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (94.80, -87.96, 5.0) and (94.59, -88.33, 6.8) checkLTHo : distance = 0.424, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(94.59, -88.33, 6.8) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1323.par makePlates : plateInfo struct for plate 1812 : (h4).mjd 53143 (h4).raCen 217.8012 (h4).decCen 8.48921 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 217.801 8.489 217.801 9.989 plMakePlateFromTile : mjd of obs : 53143.714784 Observed HA/dec of plate center, fiducial point (deg) : 21.998 8.477 21.998 9.977 The rotation angle of the fid. point is -36.838867 plMakePlateFromTile : beginning loop over 1386 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1324.par makePlates : plateInfo struct for plate 1813 : (h4).mjd 53143 (h4).raCen 220.2696 (h4).decCen 8.28821 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 220.270 8.288 220.270 9.788 plMakePlateFromTile : mjd of obs : 53143.713308 Observed HA/dec of plate center, fiducial point (deg) : 18.998 8.276 18.998 9.776 The rotation angle of the fid. point is -33.021143 plMakePlateFromTile : beginning loop over 1369 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (201.26, -127.65, 8.4) and (201.05, -127.65, 8.0) checkLTHo : distance = 0.216, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(201.26, -127.65, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1325.par makePlates : plateInfo struct for plate 1814 : (h4).mjd 53143 (h4).raCen 222.7953 (h4).decCen 7.939985 (h4).haCen 32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 222.795 7.940 222.795 9.440 plMakePlateFromTile : mjd of obs : 53143.756329 Observed HA/dec of plate center, fiducial point (deg) : 31.998 7.930 31.998 9.429 The rotation angle of the fid. point is -45.512815 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1326.par makePlates : plateInfo struct for plate 1815 : (h4).mjd 53143 (h4).raCen 225.0815 (h4).decCen 7.6952 (h4).haCen 29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 225.082 7.695 225.082 9.195 plMakePlateFromTile : mjd of obs : 53143.754349 Observed HA/dec of plate center, fiducial point (deg) : 28.998 7.686 28.998 9.185 The rotation angle of the fid. point is -42.943652 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1327.par makePlates : plateInfo struct for plate 1816 : (h4).mjd 53143 (h4).raCen 226.8313 (h4).decCen 7.371644 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 226.831 7.372 226.831 8.872 plMakePlateFromTile : mjd of obs : 53143.756426 Observed HA/dec of plate center, fiducial point (deg) : 27.998 7.362 27.998 8.862 The rotation angle of the fid. point is -41.792804 plMakePlateFromTile : beginning loop over 1401 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1328.par makePlates : plateInfo struct for plate 1817 : (h4).mjd 53143 (h4).raCen 228.3011 (h4).decCen 7.329802 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 228.301 7.330 228.301 8.830 plMakePlateFromTile : mjd of obs : 53143.754955 Observed HA/dec of plate center, fiducial point (deg) : 25.998 7.321 25.998 8.820 The rotation angle of the fid. point is -39.921626 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1329.par makePlates : plateInfo struct for plate 1818 : (h4).mjd 53143 (h4).raCen 229.8016 (h4).decCen 7.074958 (h4).haCen 25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 229.802 7.075 229.802 8.575 plMakePlateFromTile : mjd of obs : 53143.756341 Observed HA/dec of plate center, fiducial point (deg) : 24.998 7.066 24.998 8.566 The rotation angle of the fid. point is -38.713023 plMakePlateFromTile : beginning loop over 1383 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1330.par makePlates : plateInfo struct for plate 1819 : (h4).mjd 53143 (h4).raCen 232.0294 (h4).decCen 6.588215 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 232.029 6.588 232.029 8.088 plMakePlateFromTile : mjd of obs : 53143.754199 Observed HA/dec of plate center, fiducial point (deg) : 21.998 6.580 21.998 8.080 The rotation angle of the fid. point is -35.093214 plMakePlateFromTile : beginning loop over 1433 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1331.par makePlates : plateInfo struct for plate 1820 : (h4).mjd 53143 (h4).raCen 233.588 (h4).decCen 6.570111 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 233.588 6.570 233.588 8.070 plMakePlateFromTile : mjd of obs : 53143.755746 Observed HA/dec of plate center, fiducial point (deg) : 20.998 6.562 20.998 8.062 The rotation angle of the fid. point is -33.929567 plMakePlateFromTile : beginning loop over 1406 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1332.par makePlates : plateInfo struct for plate 1821 : (h4).mjd 53143 (h4).raCen 236.1676 (h4).decCen 6.339967 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 236.168 6.340 236.168 7.840 plMakePlateFromTile : mjd of obs : 53143.754579 Observed HA/dec of plate center, fiducial point (deg) : 17.998 6.333 17.998 7.832 The rotation angle of the fid. point is -30.021623 plMakePlateFromTile : beginning loop over 1388 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1333.par makePlates : plateInfo struct for plate 1822 : (h4).mjd 53143 (h4).raCen 238.9936 (h4).decCen 6.067268 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 238.994 6.067 238.994 7.567 plMakePlateFromTile : mjd of obs : 53143.756865 Observed HA/dec of plate center, fiducial point (deg) : 15.998 6.061 15.998 7.561 The rotation angle of the fid. point is -27.107384 plMakePlateFromTile : beginning loop over 1376 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk94/complete//plPlugMapT-1334.par makePlates : plateInfo struct for plate 1823 : (h4).mjd 53143 (h4).raCen 242.7737 (h4).decCen 4.760441 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.774 4.760 242.774 6.260 plMakePlateFromTile : mjd of obs : 53143.756254 Observed HA/dec of plate center, fiducial point (deg) : 11.998 4.756 11.998 6.255 The rotation angle of the fid. point is -20.364069 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Mar 29 11:58:40 CST 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_183/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_183/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 35 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1789.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 119 2 10 102 3 11 90 4 11 119 5 6 132 6 5 98 7 6 94 8 6 109 9 5 100 10 19 140 11 14 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 69 31 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 70 17 plFiberPlate : adding spectro-photo std with objId = 3031 40 4 470 43 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 65 22 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 69 63 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 468 52 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 476 43 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 467 43 plFiberPlate : 89 possible sky positions to use as objects from a possible 618. plFiberPlate : 57 possible sky positions to use as objects from a possible 617. plFiberPlate : 45 possible sky positions to use as objects from a possible 616. plFiberPlate : 29 possible sky positions to use as objects from a possible 615. plFiberPlate : 32 possible sky positions to use as objects from a possible 614. plFiberPlate : 12 possible sky positions to use as objects from a possible 613. plFiberPlate : 67 possible sky positions to use as objects from a possible 612. plFiberPlate : 58 possible sky positions to use as objects from a possible 611. plFiberPlate : 43 possible sky positions to use as objects from a possible 610. plFiberPlate : 34 possible sky positions to use as objects from a possible 609. plFiberPlate : 29 possible sky positions to use as objects from a possible 608. plFiberPlate : 14 possible sky positions to use as objects from a possible 607. plFiberPlate : 11 possible sky positions to use as objects from a possible 606. plFiberPlate : 13 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 40 possible sky positions to use as objects from a possible 603. plFiberPlate : 50 possible sky positions to use as objects from a possible 602. plFiberPlate : 37 possible sky positions to use as objects from a possible 601. plFiberPlate : 34 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 12 possible sky positions to use as objects from a possible 598. plFiberPlate : 2 possible sky positions to use as objects from a possible 597. plFiberPlate : 6 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 55 possible sky positions to use as objects from a possible 594. plFiberPlate : 34 possible sky positions to use as objects from a possible 593. plFiberPlate : 26 possible sky positions to use as objects from a possible 592. plFiberPlate : 16 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 7 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1789.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1789.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1790.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 122 2 8 105 3 6 95 4 11 107 5 10 126 6 9 101 7 9 87 8 7 106 9 7 98 10 8 163 11 9 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 177 40 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 69 31 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 176 60 plFiberPlate : adding spectro-photo std with objId = 3841 41 1 183 41 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 68 66 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 183 77 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 64 12 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 174 80 plFiberPlate : 102 possible sky positions to use as objects from a possible 626. plFiberPlate : 74 possible sky positions to use as objects from a possible 625. plFiberPlate : 59 possible sky positions to use as objects from a possible 624. plFiberPlate : 38 possible sky positions to use as objects from a possible 623. plFiberPlate : 40 possible sky positions to use as objects from a possible 622. plFiberPlate : 23 possible sky positions to use as objects from a possible 621. plFiberPlate : 50 possible sky positions to use as objects from a possible 620. plFiberPlate : 61 possible sky positions to use as objects from a possible 619. plFiberPlate : 39 possible sky positions to use as objects from a possible 618. plFiberPlate : 21 possible sky positions to use as objects from a possible 617. plFiberPlate : 15 possible sky positions to use as objects from a possible 616. plFiberPlate : 9 possible sky positions to use as objects from a possible 615. plFiberPlate : 11 possible sky positions to use as objects from a possible 614. plFiberPlate : 9 possible sky positions to use as objects from a possible 613. plFiberPlate : 3 possible sky positions to use as objects from a possible 612. plFiberPlate : 48 possible sky positions to use as objects from a possible 611. plFiberPlate : 68 possible sky positions to use as objects from a possible 610. plFiberPlate : 34 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 10 possible sky positions to use as objects from a possible 607. plFiberPlate : 8 possible sky positions to use as objects from a possible 606. plFiberPlate : 9 possible sky positions to use as objects from a possible 605. plFiberPlate : 3 possible sky positions to use as objects from a possible 604. plFiberPlate : 7 possible sky positions to use as objects from a possible 603. plFiberPlate : 49 possible sky positions to use as objects from a possible 602. plFiberPlate : 42 possible sky positions to use as objects from a possible 601. plFiberPlate : 33 possible sky positions to use as objects from a possible 600. plFiberPlate : 30 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 13 possible sky positions to use as objects from a possible 597. plFiberPlate : 10 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1789.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1790.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1790.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1791.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 128 2 10 88 3 7 79 4 8 91 5 9 111 6 15 98 7 9 102 8 7 117 9 14 105 10 12 143 11 11 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 484 56 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 85 82 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 495 28 plFiberPlate : adding spectro-photo std with objId = 3031 40 4 483 59 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 88 128 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 79 33 plFiberPlate : adding spectro-photo std with objId = 3031 40 1 485 48 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 487 54 plFiberPlate : 102 possible sky positions to use as objects from a possible 590. plFiberPlate : 68 possible sky positions to use as objects from a possible 589. plFiberPlate : 56 possible sky positions to use as objects from a possible 588. plFiberPlate : 39 possible sky positions to use as objects from a possible 587. plFiberPlate : 30 possible sky positions to use as objects from a possible 586. plFiberPlate : 34 possible sky positions to use as objects from a possible 585. plFiberPlate : 44 possible sky positions to use as objects from a possible 584. plFiberPlate : 87 possible sky positions to use as objects from a possible 583. plFiberPlate : 57 possible sky positions to use as objects from a possible 582. plFiberPlate : 43 possible sky positions to use as objects from a possible 581. plFiberPlate : 26 possible sky positions to use as objects from a possible 580. plFiberPlate : 26 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 19 possible sky positions to use as objects from a possible 577. plFiberPlate : 40 possible sky positions to use as objects from a possible 576. plFiberPlate : 20 possible sky positions to use as objects from a possible 575. plFiberPlate : 58 possible sky positions to use as objects from a possible 574. plFiberPlate : 54 possible sky positions to use as objects from a possible 573. plFiberPlate : 29 possible sky positions to use as objects from a possible 572. plFiberPlate : 14 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 11 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 56 possible sky positions to use as objects from a possible 565. plFiberPlate : 49 possible sky positions to use as objects from a possible 564. plFiberPlate : 33 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 25 possible sky positions to use as objects from a possible 561. plFiberPlate : 8 possible sky positions to use as objects from a possible 560. plFiberPlate : 28 possible sky positions to use as objects from a possible 559. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1790.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1791.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1791.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1792.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 128 2 5 108 3 7 102 4 11 110 5 11 122 6 8 102 7 7 81 8 15 98 9 9 104 10 13 150 11 7 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 198 68 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 199 51 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 86 29 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 183 77 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 194 24 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 79 33 plFiberPlate : adding spectro-photo std with objId = 3031 40 1 485 48 plFiberPlate : adding spectro-photo std with objId = 3842 41 2 90 93 plFiberPlate : 124 possible sky positions to use as objects from a possible 620. plFiberPlate : 68 possible sky positions to use as objects from a possible 619. plFiberPlate : 52 possible sky positions to use as objects from a possible 618. plFiberPlate : 25 possible sky positions to use as objects from a possible 617. plFiberPlate : 40 possible sky positions to use as objects from a possible 616. plFiberPlate : 25 possible sky positions to use as objects from a possible 615. plFiberPlate : 59 possible sky positions to use as objects from a possible 614. plFiberPlate : 75 possible sky positions to use as objects from a possible 613. plFiberPlate : 55 possible sky positions to use as objects from a possible 612. plFiberPlate : 26 possible sky positions to use as objects from a possible 611. plFiberPlate : 22 possible sky positions to use as objects from a possible 610. plFiberPlate : 16 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 14 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 79 possible sky positions to use as objects from a possible 604. plFiberPlate : 47 possible sky positions to use as objects from a possible 603. plFiberPlate : 43 possible sky positions to use as objects from a possible 602. plFiberPlate : 29 possible sky positions to use as objects from a possible 601. plFiberPlate : 21 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 5 possible sky positions to use as objects from a possible 598. plFiberPlate : 30 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 51 possible sky positions to use as objects from a possible 595. plFiberPlate : 28 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 12 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 5 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1791.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1792.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1792.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1793.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 124 2 6 86 3 4 92 4 5 114 5 13 122 6 12 99 7 7 101 8 9 123 9 11 119 10 8 163 11 9 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 40 1 496 98 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 98 12 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 89 54 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 495 28 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 508 86 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 508 15 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 96 13 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 507 30 plFiberPlate : 109 possible sky positions to use as objects from a possible 642. plFiberPlate : 76 possible sky positions to use as objects from a possible 641. plFiberPlate : 51 possible sky positions to use as objects from a possible 640. plFiberPlate : 50 possible sky positions to use as objects from a possible 639. plFiberPlate : 36 possible sky positions to use as objects from a possible 638. plFiberPlate : 13 possible sky positions to use as objects from a possible 637. plFiberPlate : 38 possible sky positions to use as objects from a possible 636. plFiberPlate : 112 possible sky positions to use as objects from a possible 635. plFiberPlate : 71 possible sky positions to use as objects from a possible 634. plFiberPlate : 54 possible sky positions to use as objects from a possible 633. plFiberPlate : 30 possible sky positions to use as objects from a possible 632. plFiberPlate : 14 possible sky positions to use as objects from a possible 631. plFiberPlate : 23 possible sky positions to use as objects from a possible 630. plFiberPlate : 7 possible sky positions to use as objects from a possible 629. plFiberPlate : 24 possible sky positions to use as objects from a possible 628. plFiberPlate : 41 possible sky positions to use as objects from a possible 627. plFiberPlate : 101 possible sky positions to use as objects from a possible 626. plFiberPlate : 82 possible sky positions to use as objects from a possible 625. plFiberPlate : 52 possible sky positions to use as objects from a possible 624. plFiberPlate : 38 possible sky positions to use as objects from a possible 623. plFiberPlate : 23 possible sky positions to use as objects from a possible 622. plFiberPlate : 19 possible sky positions to use as objects from a possible 621. plFiberPlate : 5 possible sky positions to use as objects from a possible 620. plFiberPlate : 31 possible sky positions to use as objects from a possible 619. plFiberPlate : 44 possible sky positions to use as objects from a possible 618. plFiberPlate : 62 possible sky positions to use as objects from a possible 617. plFiberPlate : 46 possible sky positions to use as objects from a possible 616. plFiberPlate : 36 possible sky positions to use as objects from a possible 615. plFiberPlate : 15 possible sky positions to use as objects from a possible 614. plFiberPlate : 15 possible sky positions to use as objects from a possible 613. plFiberPlate : 18 possible sky positions to use as objects from a possible 612. plFiberPlate : 17 possible sky positions to use as objects from a possible 611. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1792.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1793.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1793.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1794.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 123 2 12 98 3 12 97 4 14 108 5 16 108 6 9 101 7 4 96 8 10 104 9 6 94 10 26 140 11 21 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 102 43 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 206 84 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 211 44 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 213 105 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 99 17 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 212 109 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 210 128 plFiberPlate : adding spectro-photo std with objId = 3842 41 2 90 93 plFiberPlate : 112 possible sky positions to use as objects from a possible 597. plFiberPlate : 65 possible sky positions to use as objects from a possible 596. plFiberPlate : 24 possible sky positions to use as objects from a possible 595. plFiberPlate : 24 possible sky positions to use as objects from a possible 594. plFiberPlate : 23 possible sky positions to use as objects from a possible 593. plFiberPlate : 38 possible sky positions to use as objects from a possible 592. plFiberPlate : 35 possible sky positions to use as objects from a possible 591. plFiberPlate : 71 possible sky positions to use as objects from a possible 590. plFiberPlate : 48 possible sky positions to use as objects from a possible 589. plFiberPlate : 26 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 5 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 21 possible sky positions to use as objects from a possible 582. plFiberPlate : 54 possible sky positions to use as objects from a possible 581. plFiberPlate : 35 possible sky positions to use as objects from a possible 580. plFiberPlate : 18 possible sky positions to use as objects from a possible 579. plFiberPlate : 13 possible sky positions to use as objects from a possible 578. plFiberPlate : 5 possible sky positions to use as objects from a possible 577. plFiberPlate : 1 possible sky positions to use as objects from a possible 576. plFiberPlate : 9 possible sky positions to use as objects from a possible 575. plFiberPlate : 18 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 37 possible sky positions to use as objects from a possible 572. plFiberPlate : 33 possible sky positions to use as objects from a possible 571. plFiberPlate : 9 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 11 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1793.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1794.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1794.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1795.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 122 2 10 107 3 10 94 4 12 110 5 15 113 6 8 92 7 6 94 8 8 115 9 9 100 10 11 149 11 7 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 112 23 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 211 44 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 220 104 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 107 2 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 213 105 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 212 109 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 210 128 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 116 64 plFiberPlate : 111 possible sky positions to use as objects from a possible 609. plFiberPlate : 46 possible sky positions to use as objects from a possible 608. plFiberPlate : 34 possible sky positions to use as objects from a possible 607. plFiberPlate : 30 possible sky positions to use as objects from a possible 606. plFiberPlate : 23 possible sky positions to use as objects from a possible 605. plFiberPlate : 27 possible sky positions to use as objects from a possible 604. plFiberPlate : 45 possible sky positions to use as objects from a possible 603. plFiberPlate : 92 possible sky positions to use as objects from a possible 602. plFiberPlate : 54 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : 15 possible sky positions to use as objects from a possible 599. plFiberPlate : 13 possible sky positions to use as objects from a possible 598. plFiberPlate : 11 possible sky positions to use as objects from a possible 597. plFiberPlate : 42 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 19 possible sky positions to use as objects from a possible 594. plFiberPlate : 67 possible sky positions to use as objects from a possible 593. plFiberPlate : 70 possible sky positions to use as objects from a possible 592. plFiberPlate : 36 possible sky positions to use as objects from a possible 591. plFiberPlate : 21 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 4 possible sky positions to use as objects from a possible 587. plFiberPlate : 29 possible sky positions to use as objects from a possible 586. plFiberPlate : 44 possible sky positions to use as objects from a possible 585. plFiberPlate : 33 possible sky positions to use as objects from a possible 584. plFiberPlate : 21 possible sky positions to use as objects from a possible 583. plFiberPlate : 27 possible sky positions to use as objects from a possible 582. plFiberPlate : 25 possible sky positions to use as objects from a possible 581. plFiberPlate : 6 possible sky positions to use as objects from a possible 580. plFiberPlate : 8 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1794.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1795.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1795.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1796.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 133 2 12 104 3 5 90 4 6 102 5 12 114 6 7 90 7 10 105 8 13 132 9 14 103 10 14 158 11 15 125 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3842 41 6 107 73 plFiberPlate : adding spectro-photo std with objId = 3805 41 1 66 26 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 111 23 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 19 87 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 109 19 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 508 15 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 508 86 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 507 30 plFiberPlate : 118 possible sky positions to use as objects from a possible 632. plFiberPlate : 78 possible sky positions to use as objects from a possible 631. plFiberPlate : 75 possible sky positions to use as objects from a possible 630. plFiberPlate : 44 possible sky positions to use as objects from a possible 629. plFiberPlate : 37 possible sky positions to use as objects from a possible 628. plFiberPlate : 19 possible sky positions to use as objects from a possible 627. plFiberPlate : 54 possible sky positions to use as objects from a possible 626. plFiberPlate : 83 possible sky positions to use as objects from a possible 625. plFiberPlate : 73 possible sky positions to use as objects from a possible 624. plFiberPlate : 73 possible sky positions to use as objects from a possible 623. plFiberPlate : 52 possible sky positions to use as objects from a possible 622. plFiberPlate : 38 possible sky positions to use as objects from a possible 621. plFiberPlate : 21 possible sky positions to use as objects from a possible 620. plFiberPlate : 17 possible sky positions to use as objects from a possible 619. plFiberPlate : 20 possible sky positions to use as objects from a possible 618. plFiberPlate : 84 possible sky positions to use as objects from a possible 617. plFiberPlate : 80 possible sky positions to use as objects from a possible 616. plFiberPlate : 79 possible sky positions to use as objects from a possible 615. plFiberPlate : 39 possible sky positions to use as objects from a possible 614. plFiberPlate : 24 possible sky positions to use as objects from a possible 613. plFiberPlate : 18 possible sky positions to use as objects from a possible 612. plFiberPlate : 16 possible sky positions to use as objects from a possible 611. plFiberPlate : 21 possible sky positions to use as objects from a possible 610. plFiberPlate : 12 possible sky positions to use as objects from a possible 609. plFiberPlate : 60 possible sky positions to use as objects from a possible 608. plFiberPlate : 33 possible sky positions to use as objects from a possible 607. plFiberPlate : 22 possible sky positions to use as objects from a possible 606. plFiberPlate : 21 possible sky positions to use as objects from a possible 605. plFiberPlate : 6 possible sky positions to use as objects from a possible 604. plFiberPlate : 6 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 19 possible sky positions to use as objects from a possible 601. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1795.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1796.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1796.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1797.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 123 2 6 92 3 12 82 4 9 98 5 13 123 6 11 95 7 14 91 8 17 108 9 10 98 10 9 129 11 6 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 225 68 plFiberPlate : adding spectro-photo std with objId = 3842 41 1 120 51 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 31 18 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 233 55 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 130 9 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 224 92 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 125 50 plFiberPlate : adding spectro-photo std with objId = 3842 41 3 116 64 plFiberPlate : 107 possible sky positions to use as objects from a possible 587. plFiberPlate : 67 possible sky positions to use as objects from a possible 586. plFiberPlate : 31 possible sky positions to use as objects from a possible 585. plFiberPlate : 26 possible sky positions to use as objects from a possible 584. plFiberPlate : 18 possible sky positions to use as objects from a possible 583. plFiberPlate : 17 possible sky positions to use as objects from a possible 582. plFiberPlate : 52 possible sky positions to use as objects from a possible 581. plFiberPlate : 66 possible sky positions to use as objects from a possible 580. plFiberPlate : 40 possible sky positions to use as objects from a possible 579. plFiberPlate : 31 possible sky positions to use as objects from a possible 578. plFiberPlate : 21 possible sky positions to use as objects from a possible 577. plFiberPlate : 12 possible sky positions to use as objects from a possible 576. plFiberPlate : 4 possible sky positions to use as objects from a possible 575. plFiberPlate : 7 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 42 possible sky positions to use as objects from a possible 572. plFiberPlate : 84 possible sky positions to use as objects from a possible 571. plFiberPlate : 55 possible sky positions to use as objects from a possible 570. plFiberPlate : 43 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 2 possible sky positions to use as objects from a possible 567. plFiberPlate : 15 possible sky positions to use as objects from a possible 566. plFiberPlate : 4 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 41 possible sky positions to use as objects from a possible 563. plFiberPlate : 59 possible sky positions to use as objects from a possible 562. plFiberPlate : 34 possible sky positions to use as objects from a possible 561. plFiberPlate : 17 possible sky positions to use as objects from a possible 560. plFiberPlate : 18 possible sky positions to use as objects from a possible 559. plFiberPlate : 15 possible sky positions to use as objects from a possible 558. plFiberPlate : 25 possible sky positions to use as objects from a possible 557. plFiberPlate : 18 possible sky positions to use as objects from a possible 556. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1796.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1797.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1797.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1798.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 130 2 12 96 3 13 86 4 13 91 5 12 113 6 9 97 7 9 89 8 10 123 9 7 114 10 19 149 11 12 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 26 44 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 32 53 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 29 84 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 233 55 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 27 80 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 125 86 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 30 52 plFiberPlate : adding spectro-photo std with objId = 3836 41 1 338 17 plFiberPlate : 110 possible sky positions to use as objects from a possible 609. plFiberPlate : 89 possible sky positions to use as objects from a possible 608. plFiberPlate : 75 possible sky positions to use as objects from a possible 607. plFiberPlate : 60 possible sky positions to use as objects from a possible 606. plFiberPlate : 28 possible sky positions to use as objects from a possible 605. plFiberPlate : 31 possible sky positions to use as objects from a possible 604. plFiberPlate : 53 possible sky positions to use as objects from a possible 603. plFiberPlate : 77 possible sky positions to use as objects from a possible 602. plFiberPlate : 68 possible sky positions to use as objects from a possible 601. plFiberPlate : 57 possible sky positions to use as objects from a possible 600. plFiberPlate : 40 possible sky positions to use as objects from a possible 599. plFiberPlate : 38 possible sky positions to use as objects from a possible 598. plFiberPlate : 24 possible sky positions to use as objects from a possible 597. plFiberPlate : 14 possible sky positions to use as objects from a possible 596. plFiberPlate : 20 possible sky positions to use as objects from a possible 595. plFiberPlate : 53 possible sky positions to use as objects from a possible 594. plFiberPlate : 80 possible sky positions to use as objects from a possible 593. plFiberPlate : 70 possible sky positions to use as objects from a possible 592. plFiberPlate : 53 possible sky positions to use as objects from a possible 591. plFiberPlate : 40 possible sky positions to use as objects from a possible 590. plFiberPlate : 29 possible sky positions to use as objects from a possible 589. plFiberPlate : 15 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 61 possible sky positions to use as objects from a possible 585. plFiberPlate : 46 possible sky positions to use as objects from a possible 584. plFiberPlate : 32 possible sky positions to use as objects from a possible 583. plFiberPlate : 24 possible sky positions to use as objects from a possible 582. plFiberPlate : 21 possible sky positions to use as objects from a possible 581. plFiberPlate : 5 possible sky positions to use as objects from a possible 580. plFiberPlate : 12 possible sky positions to use as objects from a possible 579. plFiberPlate : 17 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1797.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1798.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1798.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1799.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 118 2 5 94 3 10 100 4 7 106 5 11 120 6 11 94 7 16 91 8 13 109 9 15 111 10 11 153 11 7 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3905 40 1 19 8 plFiberPlate : adding spectro-photo std with objId = 3841 41 1 239 64 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 243 46 plFiberPlate : adding spectro-photo std with objId = 3842 41 2 127 18 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 242 86 plFiberPlate : adding spectro-photo std with objId = 3842 41 5 130 9 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 237 71 plFiberPlate : adding spectro-photo std with objId = 3905 40 3 21 24 plFiberPlate : 119 possible sky positions to use as objects from a possible 610. plFiberPlate : 76 possible sky positions to use as objects from a possible 609. plFiberPlate : 56 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 22 possible sky positions to use as objects from a possible 606. plFiberPlate : 42 possible sky positions to use as objects from a possible 605. plFiberPlate : 45 possible sky positions to use as objects from a possible 604. plFiberPlate : 83 possible sky positions to use as objects from a possible 603. plFiberPlate : 72 possible sky positions to use as objects from a possible 602. plFiberPlate : 54 possible sky positions to use as objects from a possible 601. plFiberPlate : 35 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : 25 possible sky positions to use as objects from a possible 597. plFiberPlate : 20 possible sky positions to use as objects from a possible 596. plFiberPlate : 30 possible sky positions to use as objects from a possible 595. plFiberPlate : 79 possible sky positions to use as objects from a possible 594. plFiberPlate : 60 possible sky positions to use as objects from a possible 593. plFiberPlate : 56 possible sky positions to use as objects from a possible 592. plFiberPlate : 41 possible sky positions to use as objects from a possible 591. plFiberPlate : 23 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 15 possible sky positions to use as objects from a possible 588. plFiberPlate : 33 possible sky positions to use as objects from a possible 587. plFiberPlate : 27 possible sky positions to use as objects from a possible 586. plFiberPlate : 53 possible sky positions to use as objects from a possible 585. plFiberPlate : 30 possible sky positions to use as objects from a possible 584. plFiberPlate : 24 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 16 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1798.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1799.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1799.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1800.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 126 2 11 96 3 9 77 4 14 103 5 12 113 6 6 95 7 6 103 8 9 108 9 8 102 10 17 157 11 10 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 38 5 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 47 89 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 41 9 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 44 5 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 45 10 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 43 72 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 42 95 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 142 10 plFiberPlate : 100 possible sky positions to use as objects from a possible 601. plFiberPlate : 76 possible sky positions to use as objects from a possible 600. plFiberPlate : 52 possible sky positions to use as objects from a possible 599. plFiberPlate : 36 possible sky positions to use as objects from a possible 598. plFiberPlate : 37 possible sky positions to use as objects from a possible 597. plFiberPlate : 24 possible sky positions to use as objects from a possible 596. plFiberPlate : 57 possible sky positions to use as objects from a possible 595. plFiberPlate : 100 possible sky positions to use as objects from a possible 594. plFiberPlate : 65 possible sky positions to use as objects from a possible 593. plFiberPlate : 49 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 27 possible sky positions to use as objects from a possible 590. plFiberPlate : 9 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 25 possible sky positions to use as objects from a possible 587. plFiberPlate : 32 possible sky positions to use as objects from a possible 586. plFiberPlate : 80 possible sky positions to use as objects from a possible 585. plFiberPlate : 64 possible sky positions to use as objects from a possible 584. plFiberPlate : 31 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : 3 possible sky positions to use as objects from a possible 580. plFiberPlate : 1 possible sky positions to use as objects from a possible 579. plFiberPlate : 18 possible sky positions to use as objects from a possible 578. plFiberPlate : 18 possible sky positions to use as objects from a possible 577. plFiberPlate : 29 possible sky positions to use as objects from a possible 576. plFiberPlate : 20 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 6 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1799.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1800.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1800.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1801.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 111 2 11 98 3 5 100 4 9 109 5 5 126 6 6 102 7 7 81 8 7 99 9 8 105 10 14 156 11 13 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3905 40 1 31 101 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 60 87 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 262 69 plFiberPlate : adding spectro-photo std with objId = 3905 40 3 17 33 plFiberPlate : adding spectro-photo std with objId = 3905 40 4 23 8 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 260 18 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 252 84 plFiberPlate : adding spectro-photo std with objId = 3905 40 3 21 24 plFiberPlate : 122 possible sky positions to use as objects from a possible 592. plFiberPlate : 77 possible sky positions to use as objects from a possible 591. plFiberPlate : 38 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 41 possible sky positions to use as objects from a possible 588. plFiberPlate : 19 possible sky positions to use as objects from a possible 587. plFiberPlate : 32 possible sky positions to use as objects from a possible 586. plFiberPlate : 82 possible sky positions to use as objects from a possible 585. plFiberPlate : 68 possible sky positions to use as objects from a possible 584. plFiberPlate : 39 possible sky positions to use as objects from a possible 583. plFiberPlate : 22 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 15 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 25 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 61 possible sky positions to use as objects from a possible 576. plFiberPlate : 28 possible sky positions to use as objects from a possible 575. plFiberPlate : 25 possible sky positions to use as objects from a possible 574. plFiberPlate : 18 possible sky positions to use as objects from a possible 573. plFiberPlate : 8 possible sky positions to use as objects from a possible 572. plFiberPlate : 13 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 8 possible sky positions to use as objects from a possible 568. plFiberPlate : 57 possible sky positions to use as objects from a possible 567. plFiberPlate : 42 possible sky positions to use as objects from a possible 566. plFiberPlate : 39 possible sky positions to use as objects from a possible 565. plFiberPlate : 20 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : 20 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1800.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1801.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1801.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1802.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 125 2 9 101 3 6 97 4 8 113 5 10 108 6 6 85 7 3 77 8 7 84 9 7 87 10 15 157 11 11 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3805 41 1 108 41 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 52 28 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 262 69 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 58 33 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 59 96 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 51 7 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 147 95 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 49 10 plFiberPlate : 110 possible sky positions to use as objects from a possible 583. plFiberPlate : 69 possible sky positions to use as objects from a possible 582. plFiberPlate : 60 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 48 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 64 possible sky positions to use as objects from a possible 577. plFiberPlate : 86 possible sky positions to use as objects from a possible 576. plFiberPlate : 34 possible sky positions to use as objects from a possible 575. plFiberPlate : 25 possible sky positions to use as objects from a possible 574. plFiberPlate : 22 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 7 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 27 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 43 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 5 possible sky positions to use as objects from a possible 563. plFiberPlate : 5 possible sky positions to use as objects from a possible 562. plFiberPlate : 3 possible sky positions to use as objects from a possible 561. plFiberPlate : 3 possible sky positions to use as objects from a possible 560. plFiberPlate : 22 possible sky positions to use as objects from a possible 559. plFiberPlate : 28 possible sky positions to use as objects from a possible 558. plFiberPlate : 25 possible sky positions to use as objects from a possible 557. plFiberPlate : 11 possible sky positions to use as objects from a possible 556. plFiberPlate : 4 possible sky positions to use as objects from a possible 555. plFiberPlate : 2 possible sky positions to use as objects from a possible 554. plFiberPlate : 8 possible sky positions to use as objects from a possible 553. plFiberPlate : 6 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1801.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1802.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1802.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1803.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 123 2 9 110 3 8 93 4 8 106 5 8 130 6 10 100 7 11 89 8 11 95 9 8 96 10 8 153 11 7 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 275 6 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 269 49 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 278 47 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 276 91 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 276 64 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 273 72 plFiberPlate : adding spectro-photo std with objId = 3905 40 1 39 126 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 269 114 plFiberPlate : 94 possible sky positions to use as objects from a possible 606. plFiberPlate : 80 possible sky positions to use as objects from a possible 605. plFiberPlate : 55 possible sky positions to use as objects from a possible 604. plFiberPlate : 46 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 69 possible sky positions to use as objects from a possible 600. plFiberPlate : 81 possible sky positions to use as objects from a possible 599. plFiberPlate : 35 possible sky positions to use as objects from a possible 598. plFiberPlate : 24 possible sky positions to use as objects from a possible 597. plFiberPlate : 10 possible sky positions to use as objects from a possible 596. plFiberPlate : 7 possible sky positions to use as objects from a possible 595. plFiberPlate : 7 possible sky positions to use as objects from a possible 594. plFiberPlate : 8 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : 37 possible sky positions to use as objects from a possible 591. plFiberPlate : 52 possible sky positions to use as objects from a possible 590. plFiberPlate : 33 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 2 possible sky positions to use as objects from a possible 587. plFiberPlate : 8 possible sky positions to use as objects from a possible 586. plFiberPlate : 4 possible sky positions to use as objects from a possible 585. plFiberPlate : 7 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 15 possible sky positions to use as objects from a possible 582. plFiberPlate : 55 possible sky positions to use as objects from a possible 581. plFiberPlate : 49 possible sky positions to use as objects from a possible 580. plFiberPlate : 25 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 17 possible sky positions to use as objects from a possible 577. plFiberPlate : 8 possible sky positions to use as objects from a possible 576. plFiberPlate : 24 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1802.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1803.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1803.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1804.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 111 2 8 100 3 8 96 4 9 119 5 6 119 6 9 104 7 5 100 8 4 105 9 6 111 10 12 149 11 10 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 67 102 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 69 20 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 165 98 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 67 62 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 159 12 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 167 43 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 172 11 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 162 42 plFiberPlate : 140 possible sky positions to use as objects from a possible 609. plFiberPlate : 78 possible sky positions to use as objects from a possible 608. plFiberPlate : 58 possible sky positions to use as objects from a possible 607. plFiberPlate : 41 possible sky positions to use as objects from a possible 606. plFiberPlate : 33 possible sky positions to use as objects from a possible 605. plFiberPlate : 24 possible sky positions to use as objects from a possible 604. plFiberPlate : 30 possible sky positions to use as objects from a possible 603. plFiberPlate : 69 possible sky positions to use as objects from a possible 602. plFiberPlate : 50 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 19 possible sky positions to use as objects from a possible 599. plFiberPlate : 9 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 11 possible sky positions to use as objects from a possible 596. plFiberPlate : 14 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 68 possible sky positions to use as objects from a possible 593. plFiberPlate : 51 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 6 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 7 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 6 possible sky positions to use as objects from a possible 585. plFiberPlate : 43 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 26 possible sky positions to use as objects from a possible 582. plFiberPlate : 14 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 25 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1803.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1804.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1804.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1805.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 117 2 12 102 3 8 92 4 8 108 5 10 110 6 5 96 7 11 92 8 13 105 9 9 103 10 14 147 11 9 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3905 40 3 56 39 plFiberPlate : adding spectro-photo std with objId = 3841 41 4 293 51 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 177 66 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 284 125 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 296 21 plFiberPlate : adding spectro-photo std with objId = 3905 40 3 52 72 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 284 129 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 86 25 plFiberPlate : 116 possible sky positions to use as objects from a possible 594. plFiberPlate : 73 possible sky positions to use as objects from a possible 593. plFiberPlate : 54 possible sky positions to use as objects from a possible 592. plFiberPlate : 33 possible sky positions to use as objects from a possible 591. plFiberPlate : 52 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 87 possible sky positions to use as objects from a possible 587. plFiberPlate : 59 possible sky positions to use as objects from a possible 586. plFiberPlate : 36 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 23 possible sky positions to use as objects from a possible 580. plFiberPlate : 29 possible sky positions to use as objects from a possible 579. plFiberPlate : 53 possible sky positions to use as objects from a possible 578. plFiberPlate : 39 possible sky positions to use as objects from a possible 577. plFiberPlate : 26 possible sky positions to use as objects from a possible 576. plFiberPlate : 10 possible sky positions to use as objects from a possible 575. plFiberPlate : 8 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 12 possible sky positions to use as objects from a possible 572. plFiberPlate : 2 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 66 possible sky positions to use as objects from a possible 569. plFiberPlate : 44 possible sky positions to use as objects from a possible 568. plFiberPlate : 34 possible sky positions to use as objects from a possible 567. plFiberPlate : 21 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 9 possible sky positions to use as objects from a possible 564. plFiberPlate : 36 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1804.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1805.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1805.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1806.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 129 2 9 90 3 6 87 4 10 118 5 10 119 6 14 104 7 12 102 8 5 126 9 8 86 10 12 134 11 13 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 85 6 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 86 6 plFiberPlate : adding spectro-photo std with objId = 3905 40 6 54 57 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 89 139 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 172 11 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 183 96 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 95 112 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 84 87 plFiberPlate : 124 possible sky positions to use as objects from a possible 603. plFiberPlate : 57 possible sky positions to use as objects from a possible 602. plFiberPlate : 35 possible sky positions to use as objects from a possible 601. plFiberPlate : 19 possible sky positions to use as objects from a possible 600. plFiberPlate : 26 possible sky positions to use as objects from a possible 599. plFiberPlate : 24 possible sky positions to use as objects from a possible 598. plFiberPlate : 60 possible sky positions to use as objects from a possible 597. plFiberPlate : 88 possible sky positions to use as objects from a possible 596. plFiberPlate : 31 possible sky positions to use as objects from a possible 595. plFiberPlate : 25 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 6 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 32 possible sky positions to use as objects from a possible 588. plFiberPlate : 39 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 5 possible sky positions to use as objects from a possible 584. plFiberPlate : 3 possible sky positions to use as objects from a possible 583. plFiberPlate : 1 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : 32 possible sky positions to use as objects from a possible 579. plFiberPlate : 62 possible sky positions to use as objects from a possible 578. plFiberPlate : 20 possible sky positions to use as objects from a possible 577. plFiberPlate : 12 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 17 possible sky positions to use as objects from a possible 574. plFiberPlate : 24 possible sky positions to use as objects from a possible 573. plFiberPlate : 19 possible sky positions to use as objects from a possible 572. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1805.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1806.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1806.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1807.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 130 2 12 97 3 11 79 4 12 110 5 10 136 6 8 110 7 8 98 8 7 102 9 5 102 10 12 136 11 11 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 94 10 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 92 9 plFiberPlate : adding spectro-photo std with objId = 3905 40 6 69 51 plFiberPlate : adding spectro-photo std with objId = 3903 41 6 189 101 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 89 139 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 305 20 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 197 32 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 190 36 plFiberPlate : 125 possible sky positions to use as objects from a possible 624. plFiberPlate : 64 possible sky positions to use as objects from a possible 623. plFiberPlate : 29 possible sky positions to use as objects from a possible 622. plFiberPlate : 31 possible sky positions to use as objects from a possible 621. plFiberPlate : 26 possible sky positions to use as objects from a possible 620. plFiberPlate : 32 possible sky positions to use as objects from a possible 619. plFiberPlate : 55 possible sky positions to use as objects from a possible 618. plFiberPlate : 83 possible sky positions to use as objects from a possible 617. plFiberPlate : 44 possible sky positions to use as objects from a possible 616. plFiberPlate : 16 possible sky positions to use as objects from a possible 615. plFiberPlate : 5 possible sky positions to use as objects from a possible 614. plFiberPlate : 7 possible sky positions to use as objects from a possible 613. plFiberPlate : 13 possible sky positions to use as objects from a possible 612. plFiberPlate : 27 possible sky positions to use as objects from a possible 611. plFiberPlate : 9 possible sky positions to use as objects from a possible 610. plFiberPlate : 28 possible sky positions to use as objects from a possible 609. plFiberPlate : 64 possible sky positions to use as objects from a possible 608. plFiberPlate : 49 possible sky positions to use as objects from a possible 607. plFiberPlate : 28 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 11 possible sky positions to use as objects from a possible 604. plFiberPlate : 9 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 10 possible sky positions to use as objects from a possible 600. plFiberPlate : 58 possible sky positions to use as objects from a possible 599. plFiberPlate : 19 possible sky positions to use as objects from a possible 598. plFiberPlate : 22 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 3 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 19 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1806.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1807.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1807.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1808.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 111 2 8 91 3 5 87 4 11 105 5 14 116 6 10 90 7 7 88 8 11 111 9 8 113 10 14 138 11 8 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 302 180 plFiberPlate : adding spectro-photo std with objId = 3841 41 2 299 32 plFiberPlate : adding spectro-photo std with objId = 3905 40 5 69 6 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 302 70 plFiberPlate : adding spectro-photo std with objId = 3841 41 6 305 20 plFiberPlate : adding spectro-photo std with objId = 3841 41 5 296 21 plFiberPlate : adding spectro-photo std with objId = 3841 41 3 298 134 plFiberPlate : adding spectro-photo std with objId = 3905 40 5 69 89 plFiberPlate : 109 possible sky positions to use as objects from a possible 594. plFiberPlate : 57 possible sky positions to use as objects from a possible 593. plFiberPlate : 41 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 35 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 49 possible sky positions to use as objects from a possible 588. plFiberPlate : 93 possible sky positions to use as objects from a possible 587. plFiberPlate : 36 possible sky positions to use as objects from a possible 586. plFiberPlate : 24 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 39 possible sky positions to use as objects from a possible 582. plFiberPlate : 13 possible sky positions to use as objects from a possible 581. plFiberPlate : 15 possible sky positions to use as objects from a possible 580. plFiberPlate : 12 possible sky positions to use as objects from a possible 579. plFiberPlate : 85 possible sky positions to use as objects from a possible 578. plFiberPlate : 71 possible sky positions to use as objects from a possible 577. plFiberPlate : 52 possible sky positions to use as objects from a possible 576. plFiberPlate : 22 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 21 possible sky positions to use as objects from a possible 573. plFiberPlate : 17 possible sky positions to use as objects from a possible 572. plFiberPlate : 24 possible sky positions to use as objects from a possible 571. plFiberPlate : 16 possible sky positions to use as objects from a possible 570. plFiberPlate : 49 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 25 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 24 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1807.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1808.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1808.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1809.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 126 2 13 99 3 11 100 4 13 115 5 9 114 6 8 96 7 6 88 8 6 102 9 5 92 10 22 155 11 14 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 198 64 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 208 49 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 111 68 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 200 36 plFiberPlate : adding spectro-photo std with objId = 3905 40 6 78 89 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 203 49 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 210 95 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 197 32 plFiberPlate : 143 possible sky positions to use as objects from a possible 597. plFiberPlate : 60 possible sky positions to use as objects from a possible 596. plFiberPlate : 21 possible sky positions to use as objects from a possible 595. plFiberPlate : 11 possible sky positions to use as objects from a possible 594. plFiberPlate : 32 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 42 possible sky positions to use as objects from a possible 591. plFiberPlate : 76 possible sky positions to use as objects from a possible 590. plFiberPlate : 50 possible sky positions to use as objects from a possible 589. plFiberPlate : 24 possible sky positions to use as objects from a possible 588. plFiberPlate : 14 possible sky positions to use as objects from a possible 587. plFiberPlate : 2 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 23 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 46 possible sky positions to use as objects from a possible 581. plFiberPlate : 33 possible sky positions to use as objects from a possible 580. plFiberPlate : 22 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 2 possible sky positions to use as objects from a possible 577. plFiberPlate : 6 possible sky positions to use as objects from a possible 576. plFiberPlate : 15 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 8 possible sky positions to use as objects from a possible 573. plFiberPlate : 42 possible sky positions to use as objects from a possible 572. plFiberPlate : 32 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 7 possible sky positions to use as objects from a possible 569. plFiberPlate : 6 possible sky positions to use as objects from a possible 568. plFiberPlate : 9 possible sky positions to use as objects from a possible 567. plFiberPlate : 22 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1808.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1809.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1809.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1810.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 107 2 4 98 3 5 92 4 15 123 5 9 136 6 7 109 7 12 94 8 13 104 9 9 114 10 8 148 11 5 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 218 2 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 208 49 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 113 82 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 220 29 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 119 100 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 118 101 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 210 95 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 129 61 plFiberPlate : 133 possible sky positions to use as objects from a possible 614. plFiberPlate : 65 possible sky positions to use as objects from a possible 613. plFiberPlate : 34 possible sky positions to use as objects from a possible 612. plFiberPlate : 26 possible sky positions to use as objects from a possible 611. plFiberPlate : 45 possible sky positions to use as objects from a possible 610. plFiberPlate : 29 possible sky positions to use as objects from a possible 609. plFiberPlate : 22 possible sky positions to use as objects from a possible 608. plFiberPlate : 91 possible sky positions to use as objects from a possible 607. plFiberPlate : 25 possible sky positions to use as objects from a possible 606. plFiberPlate : 10 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 23 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 3 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 95 possible sky positions to use as objects from a possible 598. plFiberPlate : 59 possible sky positions to use as objects from a possible 597. plFiberPlate : 14 possible sky positions to use as objects from a possible 596. plFiberPlate : 7 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 15 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 73 possible sky positions to use as objects from a possible 589. plFiberPlate : 23 possible sky positions to use as objects from a possible 588. plFiberPlate : 7 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 12 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1809.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1810.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1810.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1811.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 123 2 14 85 3 8 72 4 12 97 5 16 119 6 13 111 7 8 109 8 7 107 9 10 100 10 14 145 11 14 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 141 13 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 127 19 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 131 41 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 220 29 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 235 58 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 234 33 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 129 61 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 224 68 plFiberPlate : 103 possible sky positions to use as objects from a possible 594. plFiberPlate : 69 possible sky positions to use as objects from a possible 593. plFiberPlate : 55 possible sky positions to use as objects from a possible 592. plFiberPlate : 40 possible sky positions to use as objects from a possible 591. plFiberPlate : 32 possible sky positions to use as objects from a possible 590. plFiberPlate : 31 possible sky positions to use as objects from a possible 589. plFiberPlate : 56 possible sky positions to use as objects from a possible 588. plFiberPlate : 85 possible sky positions to use as objects from a possible 587. plFiberPlate : 64 possible sky positions to use as objects from a possible 586. plFiberPlate : 54 possible sky positions to use as objects from a possible 585. plFiberPlate : 34 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 31 possible sky positions to use as objects from a possible 582. plFiberPlate : 18 possible sky positions to use as objects from a possible 581. plFiberPlate : 32 possible sky positions to use as objects from a possible 580. plFiberPlate : 22 possible sky positions to use as objects from a possible 579. plFiberPlate : 60 possible sky positions to use as objects from a possible 578. plFiberPlate : 29 possible sky positions to use as objects from a possible 577. plFiberPlate : 13 possible sky positions to use as objects from a possible 576. plFiberPlate : 9 possible sky positions to use as objects from a possible 575. plFiberPlate : 7 possible sky positions to use as objects from a possible 574. plFiberPlate : 5 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 5 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 54 possible sky positions to use as objects from a possible 569. plFiberPlate : 31 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 16 possible sky positions to use as objects from a possible 565. plFiberPlate : 13 possible sky positions to use as objects from a possible 564. plFiberPlate : 13 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1810.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1811.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1811.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1812.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 109 2 9 88 3 10 90 4 14 108 5 17 127 6 8 97 7 10 99 8 11 106 9 8 109 10 15 147 11 12 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 141 13 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 238 5 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 145 34 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 236 13 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 234 33 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 235 58 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 154 118 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 149 135 plFiberPlate : 124 possible sky positions to use as objects from a possible 598. plFiberPlate : 90 possible sky positions to use as objects from a possible 597. plFiberPlate : 47 possible sky positions to use as objects from a possible 596. plFiberPlate : 43 possible sky positions to use as objects from a possible 595. plFiberPlate : 21 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 42 possible sky positions to use as objects from a possible 592. plFiberPlate : 70 possible sky positions to use as objects from a possible 591. plFiberPlate : 51 possible sky positions to use as objects from a possible 590. plFiberPlate : 39 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 3 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 23 possible sky positions to use as objects from a possible 583. plFiberPlate : 71 possible sky positions to use as objects from a possible 582. plFiberPlate : 35 possible sky positions to use as objects from a possible 581. plFiberPlate : 11 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 11 possible sky positions to use as objects from a possible 577. plFiberPlate : 3 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 21 possible sky positions to use as objects from a possible 574. plFiberPlate : 47 possible sky positions to use as objects from a possible 573. plFiberPlate : 49 possible sky positions to use as objects from a possible 572. plFiberPlate : 25 possible sky positions to use as objects from a possible 571. plFiberPlate : 21 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 4 possible sky positions to use as objects from a possible 568. plFiberPlate : 5 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1811.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1812.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1812.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1813.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 126 2 17 94 3 6 84 4 8 105 5 11 120 6 12 103 7 4 107 8 4 105 9 10 104 10 18 117 11 17 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 252 85 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 170 112 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 253 9 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 264 32 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 169 68 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 253 67 plFiberPlate : adding spectro-photo std with objId = 2391 40 6 86 73 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 160 79 plFiberPlate : 112 possible sky positions to use as objects from a possible 590. plFiberPlate : 66 possible sky positions to use as objects from a possible 589. plFiberPlate : 48 possible sky positions to use as objects from a possible 588. plFiberPlate : 30 possible sky positions to use as objects from a possible 587. plFiberPlate : 25 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 80 possible sky positions to use as objects from a possible 584. plFiberPlate : 57 possible sky positions to use as objects from a possible 583. plFiberPlate : 33 possible sky positions to use as objects from a possible 582. plFiberPlate : 26 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 5 possible sky positions to use as objects from a possible 579. plFiberPlate : 7 possible sky positions to use as objects from a possible 578. plFiberPlate : 5 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 37 possible sky positions to use as objects from a possible 575. plFiberPlate : 39 possible sky positions to use as objects from a possible 574. plFiberPlate : 32 possible sky positions to use as objects from a possible 573. plFiberPlate : 23 possible sky positions to use as objects from a possible 572. plFiberPlate : 14 possible sky positions to use as objects from a possible 571. plFiberPlate : 4 possible sky positions to use as objects from a possible 570. plFiberPlate : 4 possible sky positions to use as objects from a possible 569. plFiberPlate : 5 possible sky positions to use as objects from a possible 568. plFiberPlate : 14 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : 40 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 27 possible sky positions to use as objects from a possible 562. plFiberPlate : 26 possible sky positions to use as objects from a possible 561. plFiberPlate : 22 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1812.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1813.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1813.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1814.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 105 2 10 90 3 12 80 4 14 107 5 9 124 6 12 116 7 14 105 8 11 108 9 15 94 10 16 134 11 12 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3903 41 5 278 91 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 174 101 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 277 64 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 278 49 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 189 129 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 102 48 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 188 150 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 283 42 plFiberPlate : 114 possible sky positions to use as objects from a possible 589. plFiberPlate : 61 possible sky positions to use as objects from a possible 588. plFiberPlate : 33 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 33 possible sky positions to use as objects from a possible 585. plFiberPlate : 25 possible sky positions to use as objects from a possible 584. plFiberPlate : 34 possible sky positions to use as objects from a possible 583. plFiberPlate : 77 possible sky positions to use as objects from a possible 582. plFiberPlate : 45 possible sky positions to use as objects from a possible 581. plFiberPlate : 27 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : 12 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 9 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 70 possible sky positions to use as objects from a possible 573. plFiberPlate : 28 possible sky positions to use as objects from a possible 572. plFiberPlate : 24 possible sky positions to use as objects from a possible 571. plFiberPlate : 4 possible sky positions to use as objects from a possible 570. plFiberPlate : 5 possible sky positions to use as objects from a possible 569. plFiberPlate : 1 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 6 possible sky positions to use as objects from a possible 566. plFiberPlate : 25 possible sky positions to use as objects from a possible 565. plFiberPlate : 47 possible sky positions to use as objects from a possible 564. plFiberPlate : 45 possible sky positions to use as objects from a possible 563. plFiberPlate : 34 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 18 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 20 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1813.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1814.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1814.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1815.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 121 2 16 112 3 10 97 4 16 115 5 8 118 6 6 94 7 9 81 8 13 85 9 8 94 10 20 154 11 14 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3836 41 1 504 87 plFiberPlate : adding spectro-photo std with objId = 3836 41 1 505 24 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 198 8 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 189 129 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 292 134 plFiberPlate : adding spectro-photo std with objId = 3903 41 1 284 73 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 188 150 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 283 42 plFiberPlate : 126 possible sky positions to use as objects from a possible 597. plFiberPlate : 88 possible sky positions to use as objects from a possible 596. plFiberPlate : 47 possible sky positions to use as objects from a possible 595. plFiberPlate : 34 possible sky positions to use as objects from a possible 594. plFiberPlate : 44 possible sky positions to use as objects from a possible 593. plFiberPlate : 34 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 58 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 6 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 4 possible sky positions to use as objects from a possible 585. plFiberPlate : 1 possible sky positions to use as objects from a possible 584. plFiberPlate : 9 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 65 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 12 possible sky positions to use as objects from a possible 577. plFiberPlate : 2 possible sky positions to use as objects from a possible 576. plFiberPlate : 2 possible sky positions to use as objects from a possible 575. plFiberPlate : 5 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 39 possible sky positions to use as objects from a possible 572. plFiberPlate : 33 possible sky positions to use as objects from a possible 571. plFiberPlate : 23 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 24 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 17 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1814.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1815.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1815.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1816.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 102 2 9 101 3 10 110 4 17 134 5 14 126 6 4 98 7 6 91 8 10 96 9 9 85 10 18 170 11 16 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 200 164 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 200 166 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 307 63 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 205 167 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 310 141 plFiberPlate : adding spectro-photo std with objId = 3910 40 5 105 84 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 212 153 plFiberPlate : adding spectro-photo std with objId = 3910 40 5 106 85 plFiberPlate : 106 possible sky positions to use as objects from a possible 611. plFiberPlate : 53 possible sky positions to use as objects from a possible 610. plFiberPlate : 27 possible sky positions to use as objects from a possible 609. plFiberPlate : 42 possible sky positions to use as objects from a possible 608. plFiberPlate : 9 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 18 possible sky positions to use as objects from a possible 605. plFiberPlate : 49 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 2 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 5 possible sky positions to use as objects from a possible 600. plFiberPlate : 5 possible sky positions to use as objects from a possible 599. plFiberPlate : 10 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 5 possible sky positions to use as objects from a possible 596. plFiberPlate : 42 possible sky positions to use as objects from a possible 595. plFiberPlate : 30 possible sky positions to use as objects from a possible 594. plFiberPlate : 3 possible sky positions to use as objects from a possible 593. plFiberPlate : 2 possible sky positions to use as objects from a possible 592. plFiberPlate : 5 possible sky positions to use as objects from a possible 591. plFiberPlate : 0 possible sky positions to use as objects from a possible 590. plFiberPlate: No sky found for bundle at 114.663 83.535, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 590. plFiberPlate: No sky found for bundle at 114.663 83.535, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 590. plFiberPlate: No sky found for bundle at 114.663 83.535, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 590. plFiberPlate: No sky found for bundle at 114.663 83.535, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 590. plFiberPlate : 5 possible sky positions to use as objects from a possible 589. plFiberPlate : 9 possible sky positions to use as objects from a possible 588. plFiberPlate : 3 possible sky positions to use as objects from a possible 587. plFiberPlate : 54 possible sky positions to use as objects from a possible 586. plFiberPlate : 52 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 8 possible sky positions to use as objects from a possible 583. plFiberPlate : 1 possible sky positions to use as objects from a possible 582. plFiberPlate : 12 possible sky positions to use as objects from a possible 581. plFiberPlate : 40 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1815.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1816.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1816.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1817.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 102 2 15 90 3 11 76 4 15 88 5 14 119 6 10 111 7 11 114 8 16 115 9 10 117 10 25 136 11 21 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 306 130 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 143 56 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 220 105 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 310 116 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 314 11 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 212 153 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 310 141 plFiberPlate : adding spectro-photo std with objId = 3910 40 5 124 103 plFiberPlate : 107 possible sky positions to use as objects from a possible 582. plFiberPlate : 65 possible sky positions to use as objects from a possible 581. plFiberPlate : 56 possible sky positions to use as objects from a possible 580. plFiberPlate : 43 possible sky positions to use as objects from a possible 579. plFiberPlate : 44 possible sky positions to use as objects from a possible 578. plFiberPlate : 41 possible sky positions to use as objects from a possible 577. plFiberPlate : 38 possible sky positions to use as objects from a possible 576. plFiberPlate : 86 possible sky positions to use as objects from a possible 575. plFiberPlate : 67 possible sky positions to use as objects from a possible 574. plFiberPlate : 35 possible sky positions to use as objects from a possible 573. plFiberPlate : 11 possible sky positions to use as objects from a possible 572. plFiberPlate : 35 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : 3 possible sky positions to use as objects from a possible 569. plFiberPlate : 9 possible sky positions to use as objects from a possible 568. plFiberPlate : 14 possible sky positions to use as objects from a possible 567. plFiberPlate : 49 possible sky positions to use as objects from a possible 566. plFiberPlate : 27 possible sky positions to use as objects from a possible 565. plFiberPlate : 20 possible sky positions to use as objects from a possible 564. plFiberPlate : 10 possible sky positions to use as objects from a possible 563. plFiberPlate : 2 possible sky positions to use as objects from a possible 562. plFiberPlate : 7 possible sky positions to use as objects from a possible 561. plFiberPlate : 24 possible sky positions to use as objects from a possible 560. plFiberPlate : 13 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : 58 possible sky positions to use as objects from a possible 557. plFiberPlate : 32 possible sky positions to use as objects from a possible 556. plFiberPlate : 49 possible sky positions to use as objects from a possible 555. plFiberPlate : 12 possible sky positions to use as objects from a possible 554. plFiberPlate : 6 possible sky positions to use as objects from a possible 553. plFiberPlate : 19 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1816.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1817.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1817.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1818.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 130 2 11 92 3 11 64 4 18 88 5 18 127 6 16 118 7 11 88 8 11 93 9 14 91 10 21 136 11 18 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 226 51 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 226 160 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 220 105 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 315 18 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 232 63 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 314 11 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 147 44 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 148 68 plFiberPlate : 93 possible sky positions to use as objects from a possible 576. plFiberPlate : 62 possible sky positions to use as objects from a possible 575. plFiberPlate : 33 possible sky positions to use as objects from a possible 574. plFiberPlate : 9 possible sky positions to use as objects from a possible 573. plFiberPlate : 23 possible sky positions to use as objects from a possible 572. plFiberPlate : 43 possible sky positions to use as objects from a possible 571. plFiberPlate : 59 possible sky positions to use as objects from a possible 570. plFiberPlate : 61 possible sky positions to use as objects from a possible 569. plFiberPlate : 54 possible sky positions to use as objects from a possible 568. plFiberPlate : 34 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 20 possible sky positions to use as objects from a possible 565. plFiberPlate : 15 possible sky positions to use as objects from a possible 564. plFiberPlate : 24 possible sky positions to use as objects from a possible 563. plFiberPlate : 12 possible sky positions to use as objects from a possible 562. plFiberPlate : 36 possible sky positions to use as objects from a possible 561. plFiberPlate : 53 possible sky positions to use as objects from a possible 560. plFiberPlate : 40 possible sky positions to use as objects from a possible 559. plFiberPlate : 18 possible sky positions to use as objects from a possible 558. plFiberPlate : 15 possible sky positions to use as objects from a possible 557. plFiberPlate : 1 possible sky positions to use as objects from a possible 556. plFiberPlate : 6 possible sky positions to use as objects from a possible 555. plFiberPlate : 3 possible sky positions to use as objects from a possible 554. plFiberPlate : 3 possible sky positions to use as objects from a possible 553. plFiberPlate : 10 possible sky positions to use as objects from a possible 552. plFiberPlate : 60 possible sky positions to use as objects from a possible 551. plFiberPlate : 13 possible sky positions to use as objects from a possible 550. plFiberPlate : 4 possible sky positions to use as objects from a possible 549. plFiberPlate : 2 possible sky positions to use as objects from a possible 548. plFiberPlate : 4 possible sky positions to use as objects from a possible 547. plFiberPlate : 0 possible sky positions to use as objects from a possible 546. plFiberPlate: No sky found for bundle at 153.984 154.979, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 546. plFiberPlate: No sky found for bundle at 153.984 154.979, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 546. plFiberPlate: No sky found for bundle at 153.984 154.979, increase box by 30 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 546. plFiberPlate : 5 possible sky positions to use as objects from a possible 545. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1817.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1818.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1818.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1819.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 115 2 15 93 3 15 97 4 10 117 5 19 104 6 15 101 7 15 102 8 19 103 9 15 109 10 22 153 11 16 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 242 8 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 242 157 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 328 95 plFiberPlate : adding spectro-photo std with objId = 3910 40 3 145 71 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 242 170 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 335 51 plFiberPlate : adding spectro-photo std with objId = 3910 40 4 144 38 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 336 171 plFiberPlate : 136 possible sky positions to use as objects from a possible 606. plFiberPlate : 64 possible sky positions to use as objects from a possible 605. plFiberPlate : 26 possible sky positions to use as objects from a possible 604. plFiberPlate : 23 possible sky positions to use as objects from a possible 603. plFiberPlate : 37 possible sky positions to use as objects from a possible 602. plFiberPlate : 34 possible sky positions to use as objects from a possible 601. plFiberPlate : 30 possible sky positions to use as objects from a possible 600. plFiberPlate : 61 possible sky positions to use as objects from a possible 599. plFiberPlate : 42 possible sky positions to use as objects from a possible 598. plFiberPlate : 32 possible sky positions to use as objects from a possible 597. plFiberPlate : 24 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 23 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 42 possible sky positions to use as objects from a possible 590. plFiberPlate : 38 possible sky positions to use as objects from a possible 589. plFiberPlate : 23 possible sky positions to use as objects from a possible 588. plFiberPlate : 22 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 19 possible sky positions to use as objects from a possible 584. plFiberPlate : 9 possible sky positions to use as objects from a possible 583. plFiberPlate : 13 possible sky positions to use as objects from a possible 582. plFiberPlate : 32 possible sky positions to use as objects from a possible 581. plFiberPlate : 29 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 4 possible sky positions to use as objects from a possible 578. plFiberPlate : 2 possible sky positions to use as objects from a possible 577. plFiberPlate : 3 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1818.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1819.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1819.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1820.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 114 2 10 101 3 11 85 4 17 108 5 21 115 6 12 109 7 9 101 8 15 102 9 17 95 10 13 149 11 10 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 179 142 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 254 118 plFiberPlate : adding spectro-photo std with objId = 3910 40 5 162 108 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 350 160 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 357 100 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 355 29 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 356 147 plFiberPlate : adding spectro-photo std with objId = 3910 40 4 153 158 plFiberPlate : 133 possible sky positions to use as objects from a possible 572. plFiberPlate : 80 possible sky positions to use as objects from a possible 571. plFiberPlate : 48 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 25 possible sky positions to use as objects from a possible 568. plFiberPlate : 28 possible sky positions to use as objects from a possible 567. plFiberPlate : 48 possible sky positions to use as objects from a possible 566. plFiberPlate : 40 possible sky positions to use as objects from a possible 565. plFiberPlate : 16 possible sky positions to use as objects from a possible 564. plFiberPlate : 8 possible sky positions to use as objects from a possible 563. plFiberPlate : 3 possible sky positions to use as objects from a possible 562. plFiberPlate : 4 possible sky positions to use as objects from a possible 561. plFiberPlate : 8 possible sky positions to use as objects from a possible 560. plFiberPlate : 5 possible sky positions to use as objects from a possible 559. plFiberPlate : 1 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 30 possible sky positions to use as objects from a possible 556. plFiberPlate : 18 possible sky positions to use as objects from a possible 555. plFiberPlate : 12 possible sky positions to use as objects from a possible 554. plFiberPlate : 3 possible sky positions to use as objects from a possible 553. plFiberPlate : 5 possible sky positions to use as objects from a possible 552. plFiberPlate : 3 possible sky positions to use as objects from a possible 551. plFiberPlate : 1 possible sky positions to use as objects from a possible 550. plFiberPlate : 5 possible sky positions to use as objects from a possible 549. plFiberPlate : 18 possible sky positions to use as objects from a possible 548. plFiberPlate : 47 possible sky positions to use as objects from a possible 547. plFiberPlate : 28 possible sky positions to use as objects from a possible 546. plFiberPlate : 24 possible sky positions to use as objects from a possible 545. plFiberPlate : 11 possible sky positions to use as objects from a possible 544. plFiberPlate : 7 possible sky positions to use as objects from a possible 543. plFiberPlate : 7 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1819.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1820.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1820.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1821.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 111 2 12 90 3 6 82 4 18 97 5 12 114 6 15 105 7 25 95 8 26 108 9 18 97 10 14 117 11 15 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3836 41 2 574 98 plFiberPlate : adding spectro-photo std with objId = 3909 40 5 272 142 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 367 67 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 188 82 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 276 186 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 357 100 plFiberPlate : adding spectro-photo std with objId = 3903 41 2 362 173 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 272 203 plFiberPlate : 112 possible sky positions to use as objects from a possible 561. plFiberPlate : 46 possible sky positions to use as objects from a possible 560. plFiberPlate : 24 possible sky positions to use as objects from a possible 559. plFiberPlate : 23 possible sky positions to use as objects from a possible 558. plFiberPlate : 16 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 58 possible sky positions to use as objects from a possible 555. plFiberPlate : 50 possible sky positions to use as objects from a possible 554. plFiberPlate : 33 possible sky positions to use as objects from a possible 553. plFiberPlate : 13 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 8 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 3 possible sky positions to use as objects from a possible 548. plFiberPlate : 6 possible sky positions to use as objects from a possible 547. plFiberPlate : 21 possible sky positions to use as objects from a possible 546. plFiberPlate : 52 possible sky positions to use as objects from a possible 545. plFiberPlate : 48 possible sky positions to use as objects from a possible 544. plFiberPlate : 37 possible sky positions to use as objects from a possible 543. plFiberPlate : 21 possible sky positions to use as objects from a possible 542. plFiberPlate : 14 possible sky positions to use as objects from a possible 541. plFiberPlate : 16 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 14 possible sky positions to use as objects from a possible 538. plFiberPlate : 20 possible sky positions to use as objects from a possible 537. plFiberPlate : 61 possible sky positions to use as objects from a possible 536. plFiberPlate : 69 possible sky positions to use as objects from a possible 535. plFiberPlate : 64 possible sky positions to use as objects from a possible 534. plFiberPlate : 38 possible sky positions to use as objects from a possible 533. plFiberPlate : 27 possible sky positions to use as objects from a possible 532. plFiberPlate : 28 possible sky positions to use as objects from a possible 531. plFiberPlate : 53 possible sky positions to use as objects from a possible 530. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1820.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1821.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1821.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1822.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 88 2 13 73 3 12 69 4 13 88 5 18 126 6 25 125 7 23 107 8 20 99 9 23 116 10 26 119 11 14 76 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3894 40 3 231 245 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 385 136 plFiberPlate : adding spectro-photo std with objId = 3894 40 3 239 207 plFiberPlate : adding spectro-photo std with objId = 3910 40 5 187 26 plFiberPlate : adding spectro-photo std with objId = 3903 41 4 384 68 plFiberPlate : adding spectro-photo std with objId = 3910 40 4 193 187 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 282 147 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 390 75 plFiberPlate : 105 possible sky positions to use as objects from a possible 548. plFiberPlate : 49 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 16 possible sky positions to use as objects from a possible 545. plFiberPlate : 32 possible sky positions to use as objects from a possible 544. plFiberPlate : 18 possible sky positions to use as objects from a possible 543. plFiberPlate : 31 possible sky positions to use as objects from a possible 542. plFiberPlate : 64 possible sky positions to use as objects from a possible 541. plFiberPlate : 52 possible sky positions to use as objects from a possible 540. plFiberPlate : 41 possible sky positions to use as objects from a possible 539. plFiberPlate : 24 possible sky positions to use as objects from a possible 538. plFiberPlate : 10 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 18 possible sky positions to use as objects from a possible 534. plFiberPlate : 14 possible sky positions to use as objects from a possible 533. plFiberPlate : 52 possible sky positions to use as objects from a possible 532. plFiberPlate : 47 possible sky positions to use as objects from a possible 531. plFiberPlate : 33 possible sky positions to use as objects from a possible 530. plFiberPlate : 18 possible sky positions to use as objects from a possible 529. plFiberPlate : 7 possible sky positions to use as objects from a possible 528. plFiberPlate : 7 possible sky positions to use as objects from a possible 527. plFiberPlate : 9 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : 19 possible sky positions to use as objects from a possible 524. plFiberPlate : 52 possible sky positions to use as objects from a possible 523. plFiberPlate : 52 possible sky positions to use as objects from a possible 522. plFiberPlate : 70 possible sky positions to use as objects from a possible 521. plFiberPlate : 57 possible sky positions to use as objects from a possible 520. plFiberPlate : 50 possible sky positions to use as objects from a possible 519. plFiberPlate : 18 possible sky positions to use as objects from a possible 518. plFiberPlate : 48 possible sky positions to use as objects from a possible 517. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1821.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1822.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1822.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.04.1/plPlugMapP-1823.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 30 2 4 27 3 7 61 4 13 85 5 20 98 6 12 82 7 17 76 8 21 81 9 15 78 10 11 80 11 4 37 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3903 41 3 402 167 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 323 182 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 309 251 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 310 255 plFiberPlate : adding spectro-photo std with objId = 3910 40 5 213 159 plFiberPlate : adding spectro-photo std with objId = 2391 40 4 237 124 plFiberPlate : adding spectro-photo std with objId = 2391 40 3 237 206 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 311 118 plFiberPlate : 81 possible sky positions to use as objects from a possible 389. plFiberPlate : 67 possible sky positions to use as objects from a possible 388. plFiberPlate : 47 possible sky positions to use as objects from a possible 387. plFiberPlate : 35 possible sky positions to use as objects from a possible 386. plFiberPlate : 27 possible sky positions to use as objects from a possible 385. plFiberPlate : 11 possible sky positions to use as objects from a possible 384. plFiberPlate : 18 possible sky positions to use as objects from a possible 383. plFiberPlate : 58 possible sky positions to use as objects from a possible 382. plFiberPlate : 41 possible sky positions to use as objects from a possible 381. plFiberPlate : 23 possible sky positions to use as objects from a possible 380. plFiberPlate : 13 possible sky positions to use as objects from a possible 379. plFiberPlate : 8 possible sky positions to use as objects from a possible 378. plFiberPlate : 6 possible sky positions to use as objects from a possible 377. plFiberPlate : 6 possible sky positions to use as objects from a possible 376. plFiberPlate : 15 possible sky positions to use as objects from a possible 375. plFiberPlate : 18 possible sky positions to use as objects from a possible 374. plFiberPlate : 43 possible sky positions to use as objects from a possible 373. plFiberPlate : 20 possible sky positions to use as objects from a possible 372. plFiberPlate : 12 possible sky positions to use as objects from a possible 371. plFiberPlate : 5 possible sky positions to use as objects from a possible 370. plFiberPlate : 4 possible sky positions to use as objects from a possible 369. plFiberPlate : 9 possible sky positions to use as objects from a possible 368. plFiberPlate : 6 possible sky positions to use as objects from a possible 367. plFiberPlate : 4 possible sky positions to use as objects from a possible 366. plFiberPlate : 13 possible sky positions to use as objects from a possible 365. plFiberPlate : 30 possible sky positions to use as objects from a possible 364. plFiberPlate : 21 possible sky positions to use as objects from a possible 363. plFiberPlate : 13 possible sky positions to use as objects from a possible 362. plFiberPlate : 13 possible sky positions to use as objects from a possible 361. plFiberPlate : 12 possible sky positions to use as objects from a possible 360. plFiberPlate : 14 possible sky positions to use as objects from a possible 359. plFiberPlate : 10 possible sky positions to use as objects from a possible 358. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1822.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1823.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.04.1/plOverlay-1823.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Mar 29 12:00:59 CST 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_183/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_183/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 35 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1789.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1789.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1789.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1790.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1790.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1790.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1791.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2438,-3.5043) and (-12.64,-1.31) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1791.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1791.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1792.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1792.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1792.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.9676,-7.5453) and (-3.92,-12.11) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1793.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1793.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1793.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1794.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.5608,10.3255) and (6.34,10.67) plMakeFanucCodes : fixed path between (-10.8338,6.8120) and (-11.09,5.72) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1794.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1794.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1795.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1795.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1795.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1796.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1796.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.3589,10.8731) and (-12.05,-3.58) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1796.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1797.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.5905,5.1319) and (12.07,2.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1797.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1797.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1798.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4825,5.3087) and (-12.00,3.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1798.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1798.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1799.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2982,5.6339) and (11.94,3.89) plMakeFanucCodes : fixed path between (-10.5240,-7.1602) and (-11.10,-6.37) plMakeFanucCodes : fixed path between (-11.0989,-6.3702) and (-11.37,-5.75) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1799.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1799.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1800.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1800.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1800.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.5577,-8.4487) and (-12.49,2.03) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1801.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1801.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1801.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1802.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1802.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1802.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1803.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.2672,11.1586) and (4.77,11.52) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1803.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1803.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1804.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1804.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1804.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1805.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.1643,9.7522) and (-6.98,10.52) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1805.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1805.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1806.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1806.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1806.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1807.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.2605,7.5966) and (10.89,6.57) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1807.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1807.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1808.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1808.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1808.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1809.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1809.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1809.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1810.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.2743,-8.6404) and (-10.62,-6.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1810.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1810.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1811.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.1014,-12.0002) and (-2.56,-12.42) plMakeFanucCodes : fixed path between (10.7455,-6.9486) and (11.20,-5.71) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1811.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1811.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1812.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1812.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1812.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1813.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1813.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1813.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1814.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.0459,10.1133) and (-2.64,12.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1814.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1814.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1815.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1815.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1815.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1816.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.9778,-7.9635) and (10.52,-5.97) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1816.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1816.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1817.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1817.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1817.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1818.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1818.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1818.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1819.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1819.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1819.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1820.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1820.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1820.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.2978,-11.1567) and (1.23,-12.11) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1821.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1821.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1821.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1822.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1822.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1822.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1823.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1823.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.04.1/plFanuc-1823.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Mar 29 12:02:58 CST 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_183/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_183/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8be2e14 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 35 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1789 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1790 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1791 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1792 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1793 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1794 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1795 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1796 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1797 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1798 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1799 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1800 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1801 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1802 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1803 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1804 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1805 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1806 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1807 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1808 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1809 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1810 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1811 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1812 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1813 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1814 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1815 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1816 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1817 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1818 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1819 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1820 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1821 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1822 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1823 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Mar 29 12:04:19 CST 2004 Begin running "plateEnder dr2004.04.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_183/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_183/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.04.1 -morePipes 1" failed. PS: Read file for stderr output of this job.