Sender: LSF System Subject: Job 31067: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Nov 18 17:09:54 2004 Results reported at Thu Nov 18 17:13:47 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v16_146 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.11.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 201.32 sec. Max Memory : 11 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Nov 18 17:10:00 CST 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Nov 18 17:10:11 CST 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/unity/v2_6/Linux/lib/unity/bin:/sdss/ups/prd/sdsscp/v1_44/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_3/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/data/dp0.a/users/hlin/d5/kcorrect/bin:/sdss/ups/prd/sm/v2_4_27/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v16_146/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Thu Nov 18 17:10:11 CST 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v16_146/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_3/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_44/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UNITY_DIR=/sdss/ups/prd/unity/v2_6/Linux UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_JF2Eu0 --------------------------------------------------------------- --------------------------------------------------------------- Thu Nov 18 17:10:11 CST 2004 Begin running plate --------------------------------------------------------------- Thu Nov 18 17:10:11 CST 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8c5ba44 makePlates : beginning loop over plObs chain; makePlates : making 26 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1494.par makePlates : plateInfo struct for plate 2088 : (h4).mjd 53416 (h4).raCen 197.37 (h4).decCen 40.00224 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.370 40.002 197.370 41.502 plMakePlateFromTile : mjd of obs : 53416.843558 Observed HA/dec of plate center, fiducial point (deg) : -2.002 39.969 -2.002 41.468 The rotation angle of the fid. point is 166.749586 plMakePlateFromTile : beginning loop over 1281 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1495.par makePlates : plateInfo struct for plate 2089 : (h4).mjd 53416 (h4).raCen 181.9757 (h4).decCen 34.14336 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.976 34.143 181.976 35.643 plMakePlateFromTile : mjd of obs : 53416.842498 Observed HA/dec of plate center, fiducial point (deg) : 12.998 34.112 12.997 35.611 The rotation angle of the fid. point is -93.372448 plMakePlateFromTile : beginning loop over 1292 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1496.par makePlates : plateInfo struct for plate 2090 : (h4).mjd 53416 (h4).raCen 162.4211 (h4).decCen 36.30486 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.421 36.305 162.421 37.805 plMakePlateFromTile : mjd of obs : 53416.719074 Observed HA/dec of plate center, fiducial point (deg) : -12.002 36.276 -12.003 37.775 The rotation angle of the fid. point is 106.004684 plMakePlateFromTile : beginning loop over 1322 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1497.par makePlates : plateInfo struct for plate 2091 : (h4).mjd 53416 (h4).raCen 164.9557 (h4).decCen 36.9893 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 164.956 36.989 164.956 38.489 plMakePlateFromTile : mjd of obs : 53416.720551 Observed HA/dec of plate center, fiducial point (deg) : -14.002 36.959 -14.003 38.459 The rotation angle of the fid. point is 105.889991 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1498.par makePlates : plateInfo struct for plate 2092 : (h4).mjd 53416 (h4).raCen 167.9433 (h4).decCen 30.97801 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.943 30.978 167.943 32.478 plMakePlateFromTile : mjd of obs : 53416.720507 Observed HA/dec of plate center, fiducial point (deg) : -17.002 30.949 -17.003 32.449 The rotation angle of the fid. point is 78.326424 plMakePlateFromTile : beginning loop over 1178 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1499.par makePlates : plateInfo struct for plate 2093 : (h4).mjd 53416 (h4).raCen 198.4672 (h4).decCen 33.36598 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.467 33.366 198.467 34.866 plMakePlateFromTile : mjd of obs : 53416.843828 Observed HA/dec of plate center, fiducial point (deg) : -3.002 33.335 -3.002 34.834 The rotation angle of the fid. point is 101.607128 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-84.80, -278.92, 7.4) and (-84.80, -278.79, 7.6) checkLTHo : distance = 0.131, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-84.80, -278.79, 7.6) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1500.par makePlates : plateInfo struct for plate 2094 : (h4).mjd 53416 (h4).raCen 205.5835 (h4).decCen 30.23208 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.583 30.232 205.583 31.732 plMakePlateFromTile : mjd of obs : 53416.844138 Observed HA/dec of plate center, fiducial point (deg) : -10.002 30.203 -10.002 31.702 The rotation angle of the fid. point is 70.601005 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1501.par makePlates : plateInfo struct for plate 2095 : (h4).mjd 53416 (h4).raCen 180.798 (h4).decCen 32.33447 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.798 32.334 180.798 33.834 plMakePlateFromTile : mjd of obs : 53416.842007 Observed HA/dec of plate center, fiducial point (deg) : 13.998 32.304 13.997 33.803 The rotation angle of the fid. point is -83.915300 plMakePlateFromTile : beginning loop over 1277 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1502.par makePlates : plateInfo struct for plate 2096 : (h4).mjd 53416 (h4).raCen 159.2526 (h4).decCen 35.65664 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.253 35.657 159.253 37.157 plMakePlateFromTile : mjd of obs : 53416.718612 Observed HA/dec of plate center, fiducial point (deg) : -9.002 35.628 -9.003 37.128 The rotation angle of the fid. point is 108.377329 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1503.par makePlates : plateInfo struct for plate 2097 : (h4).mjd 53416 (h4).raCen 176.6817 (h4).decCen 33.88196 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.682 33.882 176.682 35.382 plMakePlateFromTile : mjd of obs : 53416.719767 Observed HA/dec of plate center, fiducial point (deg) : -26.002 33.852 -26.002 35.351 The rotation angle of the fid. point is 85.550950 plMakePlateFromTile : beginning loop over 1315 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1504.par makePlates : plateInfo struct for plate 2098 : (h4).mjd 53416 (h4).raCen 174.0714 (h4).decCen 33.68436 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.071 33.684 174.071 35.184 plMakePlateFromTile : mjd of obs : 53416.718081 Observed HA/dec of plate center, fiducial point (deg) : -24.002 33.654 -24.003 35.154 The rotation angle of the fid. point is 85.819870 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1505.par makePlates : plateInfo struct for plate 2099 : (h4).mjd 53416 (h4).raCen 179.3309 (h4).decCen 34.02853 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 179.331 34.029 179.331 35.529 plMakePlateFromTile : mjd of obs : 53416.718790 Observed HA/dec of plate center, fiducial point (deg) : -29.002 33.998 -29.002 35.498 The rotation angle of the fid. point is 84.718510 plMakePlateFromTile : beginning loop over 1327 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-45.99, 309.60, 6.8) and (-45.99, 309.53, 8.4) checkLTHo : distance = 0.066, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-45.99, 309.53, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1506.par makePlates : plateInfo struct for plate 2100 : (h4).mjd 53416 (h4).raCen 171.4187 (h4).decCen 33.44731 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.419 33.447 171.419 34.947 plMakePlateFromTile : mjd of obs : 53416.719048 Observed HA/dec of plate center, fiducial point (deg) : -21.002 33.417 -21.003 34.917 The rotation angle of the fid. point is 86.280006 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1507.par makePlates : plateInfo struct for plate 2101 : (h4).mjd 53416 (h4).raCen 205.0542 (h4).decCen 36.82026 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.054 36.820 205.054 38.320 plMakePlateFromTile : mjd of obs : 53416.842668 Observed HA/dec of plate center, fiducial point (deg) : -10.002 36.789 -10.002 38.288 The rotation angle of the fid. point is 113.077877 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1508.par makePlates : plateInfo struct for plate 2102 : (h4).mjd 53416 (h4).raCen 202.049 (h4).decCen 37.21534 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 202.049 37.215 202.049 38.715 plMakePlateFromTile : mjd of obs : 53416.842660 Observed HA/dec of plate center, fiducial point (deg) : -7.002 37.183 -7.002 38.683 The rotation angle of the fid. point is 125.444483 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (181.81, -85.50, 7.3) and (181.98, -85.65, 8.1) checkLTHo : distance = 0.232, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(181.98, -85.65, 8.1) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1509.par makePlates : plateInfo struct for plate 2103 : (h4).mjd 53416 (h4).raCen 180.5082 (h4).decCen 36.24921 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.508 36.249 180.508 37.749 plMakePlateFromTile : mjd of obs : 53416.841206 Observed HA/dec of plate center, fiducial point (deg) : 13.998 36.217 13.997 37.717 The rotation angle of the fid. point is -102.523906 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-255.08, -172.78, 6.8) and (-255.08, -172.85, 8.4) checkLTHo : distance = 0.066, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-255.08, -172.85, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1510.par makePlates : plateInfo struct for plate 2104 : (h4).mjd 53416 (h4).raCen 199.4855 (h4).decCen 31.19993 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 199.486 31.200 199.486 32.700 plMakePlateFromTile : mjd of obs : 53416.843877 Observed HA/dec of plate center, fiducial point (deg) : -4.002 31.169 -4.002 32.669 The rotation angle of the fid. point is 63.567858 plMakePlateFromTile : beginning loop over 1331 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1511.par makePlates : plateInfo struct for plate 2105 : (h4).mjd 53416 (h4).raCen 183.1959 (h4).decCen 36.30767 (h4).haCen 11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 183.196 36.308 183.196 37.808 plMakePlateFromTile : mjd of obs : 53416.840335 Observed HA/dec of plate center, fiducial point (deg) : 10.998 36.275 10.997 37.775 The rotation angle of the fid. point is -107.903399 plMakePlateFromTile : beginning loop over 1293 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1512.par makePlates : plateInfo struct for plate 2106 : (h4).mjd 53416 (h4).raCen 166.2152 (h4).decCen 32.72495 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.215 32.725 166.215 34.225 plMakePlateFromTile : mjd of obs : 53416.718494 Observed HA/dec of plate center, fiducial point (deg) : -16.002 32.696 -16.003 34.196 The rotation angle of the fid. point is 85.310344 plMakePlateFromTile : beginning loop over 1317 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1513.par makePlates : plateInfo struct for plate 2107 : (h4).mjd 53416 (h4).raCen 168.7798 (h4).decCen 33.04588 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.780 33.046 168.780 34.546 plMakePlateFromTile : mjd of obs : 53416.720054 Observed HA/dec of plate center, fiducial point (deg) : -18.002 33.016 -18.003 34.516 The rotation angle of the fid. point is 85.981857 plMakePlateFromTile : beginning loop over 1310 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1514.par makePlates : plateInfo struct for plate 2108 : (h4).mjd 53416 (h4).raCen 181.7617 (h4).decCen 38.39363 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 181.762 38.394 181.762 39.894 plMakePlateFromTile : mjd of obs : 53416.841907 Observed HA/dec of plate center, fiducial point (deg) : 12.998 38.361 12.997 39.860 The rotation angle of the fid. point is -113.913911 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1515.par makePlates : plateInfo struct for plate 2109 : (h4).mjd 53416 (h4).raCen 203.868 (h4).decCen 32.6785 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.868 32.678 203.868 34.178 plMakePlateFromTile : mjd of obs : 53416.844928 Observed HA/dec of plate center, fiducial point (deg) : -8.002 32.648 -8.002 34.148 The rotation angle of the fid. point is 86.705949 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1516.par makePlates : plateInfo struct for plate 2110 : (h4).mjd 53416 (h4).raCen 202.3381 (h4).decCen 31.0343 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 202.338 31.034 202.338 32.534 plMakePlateFromTile : mjd of obs : 53416.843463 Observed HA/dec of plate center, fiducial point (deg) : -7.002 31.004 -7.002 32.504 The rotation angle of the fid. point is 71.531567 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1517.par makePlates : plateInfo struct for plate 2111 : (h4).mjd 53416 (h4).raCen 169.844 (h4).decCen 35.36696 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.844 35.367 169.844 36.867 plMakePlateFromTile : mjd of obs : 53416.720231 Observed HA/dec of plate center, fiducial point (deg) : -19.002 35.337 -19.003 36.836 The rotation angle of the fid. point is 93.794085 plMakePlateFromTile : beginning loop over 1302 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1518.par makePlates : plateInfo struct for plate 2112 : (h4).mjd 53416 (h4).raCen 201.1067 (h4).decCen 32.89784 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 201.107 32.898 201.107 34.398 plMakePlateFromTile : mjd of obs : 53416.842824 Observed HA/dec of plate center, fiducial point (deg) : -6.002 32.867 -6.002 34.366 The rotation angle of the fid. point is 89.353196 plMakePlateFromTile : beginning loop over 1313 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk100/complete//plPlugMapT-1519.par makePlates : plateInfo struct for plate 2113 : (h4).mjd 53416 (h4).raCen 172.2711 (h4).decCen 35.79888 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.271 35.799 172.271 37.299 plMakePlateFromTile : mjd of obs : 53416.718639 Observed HA/dec of plate center, fiducial point (deg) : -22.002 35.768 -22.003 37.268 The rotation angle of the fid. point is 92.976915 plMakePlateFromTile : beginning loop over 1308 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Nov 18 17:11:04 CST 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 26 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2088.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 2 96 2 2 71 3 3 87 4 6 107 5 8 128 6 7 128 7 6 121 8 8 109 9 7 126 10 4 123 11 2 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 11 at 93.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 56 54 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 443 53 plFiberPlate : adding spectro-photo std with objId = 4382 40 3 58 131 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 436 10 plFiberPlate : adding spectro-photo std with objId = 4382 40 6 61 111 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 429 40 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 437 59 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 435 32 plFiberPlate : 83 possible sky positions to use as objects from a possible 603. plFiberPlate : 28 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 30 possible sky positions to use as objects from a possible 598. plFiberPlate : 27 possible sky positions to use as objects from a possible 597. plFiberPlate : 79 possible sky positions to use as objects from a possible 596. plFiberPlate : 20 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 5 possible sky positions to use as objects from a possible 593. plFiberPlate : 2 possible sky positions to use as objects from a possible 592. plFiberPlate : 2 possible sky positions to use as objects from a possible 591. plFiberPlate : 15 possible sky positions to use as objects from a possible 590. plFiberPlate : 23 possible sky positions to use as objects from a possible 589. plFiberPlate : 19 possible sky positions to use as objects from a possible 588. plFiberPlate : 44 possible sky positions to use as objects from a possible 587. plFiberPlate : 19 possible sky positions to use as objects from a possible 586. plFiberPlate : 18 possible sky positions to use as objects from a possible 585. plFiberPlate : 7 possible sky positions to use as objects from a possible 584. plFiberPlate : 7 possible sky positions to use as objects from a possible 583. plFiberPlate : 5 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 63 possible sky positions to use as objects from a possible 578. plFiberPlate : 65 possible sky positions to use as objects from a possible 577. plFiberPlate : 28 possible sky positions to use as objects from a possible 576. plFiberPlate : 32 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 36 possible sky positions to use as objects from a possible 573. plFiberPlate : 3 possible sky positions to use as objects from a possible 572. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2088.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2088.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2089.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 125 2 17 87 3 16 76 4 6 100 5 4 127 6 4 93 7 4 81 8 3 121 9 3 117 10 16 132 11 9 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 432 17 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 81 92 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 424 44 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 437 94 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 79 69 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 429 65 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 148 15 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 156 28 plFiberPlate : 103 possible sky positions to use as objects from a possible 594. plFiberPlate : 80 possible sky positions to use as objects from a possible 593. plFiberPlate : 48 possible sky positions to use as objects from a possible 592. plFiberPlate : 28 possible sky positions to use as objects from a possible 591. plFiberPlate : 19 possible sky positions to use as objects from a possible 590. plFiberPlate : 31 possible sky positions to use as objects from a possible 589. plFiberPlate : 63 possible sky positions to use as objects from a possible 588. plFiberPlate : 74 possible sky positions to use as objects from a possible 587. plFiberPlate : 49 possible sky positions to use as objects from a possible 586. plFiberPlate : 31 possible sky positions to use as objects from a possible 585. plFiberPlate : 19 possible sky positions to use as objects from a possible 584. plFiberPlate : 16 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : 31 possible sky positions to use as objects from a possible 579. plFiberPlate : 72 possible sky positions to use as objects from a possible 578. plFiberPlate : 48 possible sky positions to use as objects from a possible 577. plFiberPlate : 47 possible sky positions to use as objects from a possible 576. plFiberPlate : 26 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : 24 possible sky positions to use as objects from a possible 570. plFiberPlate : 45 possible sky positions to use as objects from a possible 569. plFiberPlate : 27 possible sky positions to use as objects from a possible 568. plFiberPlate : 21 possible sky positions to use as objects from a possible 567. plFiberPlate : 9 possible sky positions to use as objects from a possible 566. plFiberPlate : 18 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2088.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2089.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2089.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2090.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 127 2 8 106 3 7 83 4 8 100 5 12 133 6 7 117 7 5 92 8 4 110 9 7 116 10 11 151 11 8 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 114 9 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 45 50 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 120 22 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 335 30 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 329 75 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 52 33 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 122 48 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 115 3 plFiberPlate : 109 possible sky positions to use as objects from a possible 635. plFiberPlate : 94 possible sky positions to use as objects from a possible 634. plFiberPlate : 66 possible sky positions to use as objects from a possible 633. plFiberPlate : 38 possible sky positions to use as objects from a possible 632. plFiberPlate : 17 possible sky positions to use as objects from a possible 631. plFiberPlate : 30 possible sky positions to use as objects from a possible 630. plFiberPlate : 89 possible sky positions to use as objects from a possible 629. plFiberPlate : 84 possible sky positions to use as objects from a possible 628. plFiberPlate : 61 possible sky positions to use as objects from a possible 627. plFiberPlate : 48 possible sky positions to use as objects from a possible 626. plFiberPlate : 31 possible sky positions to use as objects from a possible 625. plFiberPlate : 15 possible sky positions to use as objects from a possible 624. plFiberPlate : 15 possible sky positions to use as objects from a possible 623. plFiberPlate : 6 possible sky positions to use as objects from a possible 622. plFiberPlate : 27 possible sky positions to use as objects from a possible 621. plFiberPlate : 29 possible sky positions to use as objects from a possible 620. plFiberPlate : 65 possible sky positions to use as objects from a possible 619. plFiberPlate : 59 possible sky positions to use as objects from a possible 618. plFiberPlate : 48 possible sky positions to use as objects from a possible 617. plFiberPlate : 40 possible sky positions to use as objects from a possible 616. plFiberPlate : 19 possible sky positions to use as objects from a possible 615. plFiberPlate : 18 possible sky positions to use as objects from a possible 614. plFiberPlate : 5 possible sky positions to use as objects from a possible 613. plFiberPlate : 27 possible sky positions to use as objects from a possible 612. plFiberPlate : 17 possible sky positions to use as objects from a possible 611. plFiberPlate : 64 possible sky positions to use as objects from a possible 610. plFiberPlate : 57 possible sky positions to use as objects from a possible 609. plFiberPlate : 14 possible sky positions to use as objects from a possible 608. plFiberPlate : 13 possible sky positions to use as objects from a possible 607. plFiberPlate : 21 possible sky positions to use as objects from a possible 606. plFiberPlate : 9 possible sky positions to use as objects from a possible 605. plFiberPlate : 23 possible sky positions to use as objects from a possible 604. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2089.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2090.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2090.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2091.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 113 2 13 101 3 9 102 4 5 132 5 11 128 6 9 109 7 10 90 8 6 105 9 7 110 10 7 164 11 7 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 136 20 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 347 25 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 345 88 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 60 75 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 124 21 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 351 90 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 60 60 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 122 48 plFiberPlate : 138 possible sky positions to use as objects from a possible 641. plFiberPlate : 63 possible sky positions to use as objects from a possible 640. plFiberPlate : 37 possible sky positions to use as objects from a possible 639. plFiberPlate : 24 possible sky positions to use as objects from a possible 638. plFiberPlate : 45 possible sky positions to use as objects from a possible 637. plFiberPlate : 16 possible sky positions to use as objects from a possible 636. plFiberPlate : 44 possible sky positions to use as objects from a possible 635. plFiberPlate : 84 possible sky positions to use as objects from a possible 634. plFiberPlate : 33 possible sky positions to use as objects from a possible 633. plFiberPlate : 17 possible sky positions to use as objects from a possible 632. plFiberPlate : 8 possible sky positions to use as objects from a possible 631. plFiberPlate : 11 possible sky positions to use as objects from a possible 630. plFiberPlate : 7 possible sky positions to use as objects from a possible 629. plFiberPlate : 8 possible sky positions to use as objects from a possible 628. plFiberPlate : 18 possible sky positions to use as objects from a possible 627. plFiberPlate : 12 possible sky positions to use as objects from a possible 626. plFiberPlate : 55 possible sky positions to use as objects from a possible 625. plFiberPlate : 43 possible sky positions to use as objects from a possible 624. plFiberPlate : 18 possible sky positions to use as objects from a possible 623. plFiberPlate : 15 possible sky positions to use as objects from a possible 622. plFiberPlate : 9 possible sky positions to use as objects from a possible 621. plFiberPlate : 8 possible sky positions to use as objects from a possible 620. plFiberPlate : 4 possible sky positions to use as objects from a possible 619. plFiberPlate : 5 possible sky positions to use as objects from a possible 618. plFiberPlate : 34 possible sky positions to use as objects from a possible 617. plFiberPlate : 59 possible sky positions to use as objects from a possible 616. plFiberPlate : 52 possible sky positions to use as objects from a possible 615. plFiberPlate : 42 possible sky positions to use as objects from a possible 614. plFiberPlate : 6 possible sky positions to use as objects from a possible 613. plFiberPlate : 14 possible sky positions to use as objects from a possible 612. plFiberPlate : 7 possible sky positions to use as objects from a possible 611. plFiberPlate : 17 possible sky positions to use as objects from a possible 610. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2090.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2091.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2091.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2092.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 86 2 1 24 3 5 44 4 11 97 5 10 115 6 8 97 7 10 101 8 6 102 9 11 99 10 10 98 11 5 70 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 77 25 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 69 39 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 168 41 plFiberPlate : adding spectro-photo std with objId = 4623 40 1 67 31 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 178 8 plFiberPlate : adding spectro-photo std with objId = 4623 40 3 82 35 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 80 62 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 169 39 plFiberPlate : 111 possible sky positions to use as objects from a possible 490. plFiberPlate : 45 possible sky positions to use as objects from a possible 489. plFiberPlate : 22 possible sky positions to use as objects from a possible 488. plFiberPlate : 4 possible sky positions to use as objects from a possible 487. plFiberPlate : 8 possible sky positions to use as objects from a possible 486. plFiberPlate : 25 possible sky positions to use as objects from a possible 485. plFiberPlate : 43 possible sky positions to use as objects from a possible 484. plFiberPlate : 51 possible sky positions to use as objects from a possible 483. plFiberPlate : 30 possible sky positions to use as objects from a possible 482. plFiberPlate : 23 possible sky positions to use as objects from a possible 481. plFiberPlate : 15 possible sky positions to use as objects from a possible 480. plFiberPlate : 5 possible sky positions to use as objects from a possible 479. plFiberPlate : 10 possible sky positions to use as objects from a possible 478. plFiberPlate : 8 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : 28 possible sky positions to use as objects from a possible 475. plFiberPlate : 45 possible sky positions to use as objects from a possible 474. plFiberPlate : 16 possible sky positions to use as objects from a possible 473. plFiberPlate : 23 possible sky positions to use as objects from a possible 472. plFiberPlate : 16 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 9 possible sky positions to use as objects from a possible 469. plFiberPlate : 10 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 18 possible sky positions to use as objects from a possible 466. plFiberPlate : 46 possible sky positions to use as objects from a possible 465. plFiberPlate : 36 possible sky positions to use as objects from a possible 464. plFiberPlate : 24 possible sky positions to use as objects from a possible 463. plFiberPlate : 12 possible sky positions to use as objects from a possible 462. plFiberPlate : 19 possible sky positions to use as objects from a possible 461. plFiberPlate : 31 possible sky positions to use as objects from a possible 460. plFiberPlate : 21 possible sky positions to use as objects from a possible 459. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2091.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2092.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2092.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2093.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 121 2 5 102 3 2 92 4 5 118 5 10 125 6 5 100 7 4 108 8 5 111 9 4 113 10 8 135 11 9 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 170 53 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 175 21 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 528 113 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 173 76 plFiberPlate : adding spectro-photo std with objId = 4599 40 6 175 61 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 514 58 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 183 36 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 246 26 plFiberPlate : 79 possible sky positions to use as objects from a possible 626. plFiberPlate : 46 possible sky positions to use as objects from a possible 625. plFiberPlate : 38 possible sky positions to use as objects from a possible 624. plFiberPlate : 36 possible sky positions to use as objects from a possible 623. plFiberPlate : 32 possible sky positions to use as objects from a possible 622. plFiberPlate : 29 possible sky positions to use as objects from a possible 621. plFiberPlate : 53 possible sky positions to use as objects from a possible 620. plFiberPlate : 70 possible sky positions to use as objects from a possible 619. plFiberPlate : 66 possible sky positions to use as objects from a possible 618. plFiberPlate : 42 possible sky positions to use as objects from a possible 617. plFiberPlate : 23 possible sky positions to use as objects from a possible 616. plFiberPlate : 12 possible sky positions to use as objects from a possible 615. plFiberPlate : 17 possible sky positions to use as objects from a possible 614. plFiberPlate : 14 possible sky positions to use as objects from a possible 613. plFiberPlate : 0 possible sky positions to use as objects from a possible 612. plFiberPlate: No sky found for bundle at 273.268 -66.602, increase box by 10 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 612. plFiberPlate : 4 possible sky positions to use as objects from a possible 611. plFiberPlate : 49 possible sky positions to use as objects from a possible 610. plFiberPlate : 37 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 13 possible sky positions to use as objects from a possible 607. plFiberPlate : 4 possible sky positions to use as objects from a possible 606. plFiberPlate : 6 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 14 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 39 possible sky positions to use as objects from a possible 601. plFiberPlate : 68 possible sky positions to use as objects from a possible 600. plFiberPlate : 37 possible sky positions to use as objects from a possible 599. plFiberPlate : 23 possible sky positions to use as objects from a possible 598. plFiberPlate : 19 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 42 possible sky positions to use as objects from a possible 595. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2092.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2093.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2093.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2094.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 121 2 13 111 3 8 103 4 10 100 5 10 124 6 6 95 7 6 105 8 10 129 9 11 114 10 16 156 11 11 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 216 27 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 285 6 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 148 29 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 280 30 plFiberPlate : adding spectro-photo std with objId = 4646 40 5 74 12 plFiberPlate : adding spectro-photo std with objId = 4599 40 1 218 45 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 293 60 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 295 54 plFiberPlate : 84 possible sky positions to use as objects from a possible 627. plFiberPlate : 76 possible sky positions to use as objects from a possible 626. plFiberPlate : 91 possible sky positions to use as objects from a possible 625. plFiberPlate : 61 possible sky positions to use as objects from a possible 624. plFiberPlate : 55 possible sky positions to use as objects from a possible 623. plFiberPlate : 28 possible sky positions to use as objects from a possible 622. plFiberPlate : 36 possible sky positions to use as objects from a possible 621. plFiberPlate : 41 possible sky positions to use as objects from a possible 620. plFiberPlate : 26 possible sky positions to use as objects from a possible 619. plFiberPlate : 13 possible sky positions to use as objects from a possible 618. plFiberPlate : 7 possible sky positions to use as objects from a possible 617. plFiberPlate : 6 possible sky positions to use as objects from a possible 616. plFiberPlate : 8 possible sky positions to use as objects from a possible 615. plFiberPlate : 7 possible sky positions to use as objects from a possible 614. plFiberPlate : 11 possible sky positions to use as objects from a possible 613. plFiberPlate : 10 possible sky positions to use as objects from a possible 612. plFiberPlate : 65 possible sky positions to use as objects from a possible 611. plFiberPlate : 44 possible sky positions to use as objects from a possible 610. plFiberPlate : 35 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 12 possible sky positions to use as objects from a possible 607. plFiberPlate : 12 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 22 possible sky positions to use as objects from a possible 603. plFiberPlate : 64 possible sky positions to use as objects from a possible 602. plFiberPlate : 46 possible sky positions to use as objects from a possible 601. plFiberPlate : 33 possible sky positions to use as objects from a possible 600. plFiberPlate : 35 possible sky positions to use as objects from a possible 599. plFiberPlate : 18 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 53 possible sky positions to use as objects from a possible 596. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2093.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2094.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2094.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2095.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 120 2 5 68 3 6 53 4 9 98 5 10 126 6 8 101 7 11 82 8 16 108 9 6 100 10 10 132 11 7 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 141 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 145 62 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 150 27 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 148 15 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 145 10 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 147 52 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 142 79 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 146 43 plFiberPlate : 100 possible sky positions to use as objects from a possible 555. plFiberPlate : 68 possible sky positions to use as objects from a possible 554. plFiberPlate : 49 possible sky positions to use as objects from a possible 553. plFiberPlate : 22 possible sky positions to use as objects from a possible 552. plFiberPlate : 18 possible sky positions to use as objects from a possible 551. plFiberPlate : 34 possible sky positions to use as objects from a possible 550. plFiberPlate : 63 possible sky positions to use as objects from a possible 549. plFiberPlate : 73 possible sky positions to use as objects from a possible 548. plFiberPlate : 39 possible sky positions to use as objects from a possible 547. plFiberPlate : 28 possible sky positions to use as objects from a possible 546. plFiberPlate : 13 possible sky positions to use as objects from a possible 545. plFiberPlate : 12 possible sky positions to use as objects from a possible 544. plFiberPlate : 3 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 13 possible sky positions to use as objects from a possible 541. plFiberPlate : 27 possible sky positions to use as objects from a possible 540. plFiberPlate : 73 possible sky positions to use as objects from a possible 539. plFiberPlate : 60 possible sky positions to use as objects from a possible 538. plFiberPlate : 29 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 8 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 14 possible sky positions to use as objects from a possible 533. plFiberPlate : 17 possible sky positions to use as objects from a possible 532. plFiberPlate : 30 possible sky positions to use as objects from a possible 531. plFiberPlate : 54 possible sky positions to use as objects from a possible 530. plFiberPlate : 41 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 15 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 15 possible sky positions to use as objects from a possible 525. plFiberPlate : 23 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2094.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2095.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2095.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2096.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 121 2 13 98 3 5 87 4 11 89 5 12 119 6 5 105 7 6 96 8 12 111 9 8 107 10 17 128 11 15 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 5 90 65 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 102 29 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 101 82 plFiberPlate : adding spectro-photo std with objId = 4518 40 6 204 128 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 198 29 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 317 103 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 209 38 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 230 83 plFiberPlate : 83 possible sky positions to use as objects from a possible 576. plFiberPlate : 68 possible sky positions to use as objects from a possible 575. plFiberPlate : 52 possible sky positions to use as objects from a possible 574. plFiberPlate : 25 possible sky positions to use as objects from a possible 573. plFiberPlate : 28 possible sky positions to use as objects from a possible 572. plFiberPlate : 33 possible sky positions to use as objects from a possible 571. plFiberPlate : 75 possible sky positions to use as objects from a possible 570. plFiberPlate : 68 possible sky positions to use as objects from a possible 569. plFiberPlate : 53 possible sky positions to use as objects from a possible 568. plFiberPlate : 48 possible sky positions to use as objects from a possible 567. plFiberPlate : 40 possible sky positions to use as objects from a possible 566. plFiberPlate : 22 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 19 possible sky positions to use as objects from a possible 563. plFiberPlate : 23 possible sky positions to use as objects from a possible 562. plFiberPlate : 31 possible sky positions to use as objects from a possible 561. plFiberPlate : 52 possible sky positions to use as objects from a possible 560. plFiberPlate : 50 possible sky positions to use as objects from a possible 559. plFiberPlate : 27 possible sky positions to use as objects from a possible 558. plFiberPlate : 11 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 6 possible sky positions to use as objects from a possible 554. plFiberPlate : 15 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 67 possible sky positions to use as objects from a possible 551. plFiberPlate : 75 possible sky positions to use as objects from a possible 550. plFiberPlate : 46 possible sky positions to use as objects from a possible 549. plFiberPlate : 28 possible sky positions to use as objects from a possible 548. plFiberPlate : 27 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 21 possible sky positions to use as objects from a possible 545. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2095.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2096.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2096.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2097.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 130 2 10 91 3 9 92 4 10 113 5 2 124 6 1 110 7 6 97 8 8 108 9 4 114 10 9 130 11 8 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 128 40 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 403 41 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 401 11 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 123 6 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 407 2 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 51 10 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 118 50 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 400 45 plFiberPlate : 131 possible sky positions to use as objects from a possible 616. plFiberPlate : 52 possible sky positions to use as objects from a possible 615. plFiberPlate : 27 possible sky positions to use as objects from a possible 614. plFiberPlate : 13 possible sky positions to use as objects from a possible 613. plFiberPlate : 15 possible sky positions to use as objects from a possible 612. plFiberPlate : 38 possible sky positions to use as objects from a possible 611. plFiberPlate : 79 possible sky positions to use as objects from a possible 610. plFiberPlate : 72 possible sky positions to use as objects from a possible 609. plFiberPlate : 38 possible sky positions to use as objects from a possible 608. plFiberPlate : 24 possible sky positions to use as objects from a possible 607. plFiberPlate : 19 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 10 possible sky positions to use as objects from a possible 604. plFiberPlate : 16 possible sky positions to use as objects from a possible 603. plFiberPlate : 20 possible sky positions to use as objects from a possible 602. plFiberPlate : 34 possible sky positions to use as objects from a possible 601. plFiberPlate : 68 possible sky positions to use as objects from a possible 600. plFiberPlate : 46 possible sky positions to use as objects from a possible 599. plFiberPlate : 27 possible sky positions to use as objects from a possible 598. plFiberPlate : 20 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 9 possible sky positions to use as objects from a possible 594. plFiberPlate : 22 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 82 possible sky positions to use as objects from a possible 591. plFiberPlate : 58 possible sky positions to use as objects from a possible 590. plFiberPlate : 30 possible sky positions to use as objects from a possible 589. plFiberPlate : 9 possible sky positions to use as objects from a possible 588. plFiberPlate : 23 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 28 possible sky positions to use as objects from a possible 585. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2096.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2097.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2097.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2098.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 121 2 9 92 3 13 92 4 12 122 5 7 114 6 5 93 7 6 99 8 5 107 9 2 106 10 16 145 11 11 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 384 7 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 39 16 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 385 56 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 106 14 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 118 50 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 209 10 plFiberPlate : adding spectro-photo std with objId = 4552 40 2 44 75 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 386 37 plFiberPlate : 148 possible sky positions to use as objects from a possible 606. plFiberPlate : 62 possible sky positions to use as objects from a possible 605. plFiberPlate : 11 possible sky positions to use as objects from a possible 604. plFiberPlate : 9 possible sky positions to use as objects from a possible 603. plFiberPlate : 12 possible sky positions to use as objects from a possible 602. plFiberPlate : 23 possible sky positions to use as objects from a possible 601. plFiberPlate : 31 possible sky positions to use as objects from a possible 600. plFiberPlate : 83 possible sky positions to use as objects from a possible 599. plFiberPlate : 47 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 2 possible sky positions to use as objects from a possible 595. plFiberPlate : 5 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 18 possible sky positions to use as objects from a possible 592. plFiberPlate : 28 possible sky positions to use as objects from a possible 591. plFiberPlate : 67 possible sky positions to use as objects from a possible 590. plFiberPlate : 41 possible sky positions to use as objects from a possible 589. plFiberPlate : 31 possible sky positions to use as objects from a possible 588. plFiberPlate : 21 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 6 possible sky positions to use as objects from a possible 584. plFiberPlate : 22 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 47 possible sky positions to use as objects from a possible 581. plFiberPlate : 44 possible sky positions to use as objects from a possible 580. plFiberPlate : 38 possible sky positions to use as objects from a possible 579. plFiberPlate : 28 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 22 possible sky positions to use as objects from a possible 576. plFiberPlate : 44 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2097.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2098.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2098.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2099.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 132 2 6 99 3 7 103 4 10 117 5 10 129 6 3 106 7 7 98 8 6 105 9 6 104 10 12 147 11 9 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 424 31 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 423 65 plFiberPlate : adding spectro-photo std with objId = 4599 40 6 78 90 plFiberPlate : adding spectro-photo std with objId = 4552 40 2 61 58 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 411 68 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 424 44 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 142 79 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 66 105 plFiberPlate : 143 possible sky positions to use as objects from a possible 631. plFiberPlate : 54 possible sky positions to use as objects from a possible 630. plFiberPlate : 45 possible sky positions to use as objects from a possible 629. plFiberPlate : 23 possible sky positions to use as objects from a possible 628. plFiberPlate : 32 possible sky positions to use as objects from a possible 627. plFiberPlate : 26 possible sky positions to use as objects from a possible 626. plFiberPlate : 53 possible sky positions to use as objects from a possible 625. plFiberPlate : 76 possible sky positions to use as objects from a possible 624. plFiberPlate : 38 possible sky positions to use as objects from a possible 623. plFiberPlate : 23 possible sky positions to use as objects from a possible 622. plFiberPlate : 10 possible sky positions to use as objects from a possible 621. plFiberPlate : 1 possible sky positions to use as objects from a possible 620. plFiberPlate : 1 possible sky positions to use as objects from a possible 619. plFiberPlate : 6 possible sky positions to use as objects from a possible 618. plFiberPlate : 27 possible sky positions to use as objects from a possible 617. plFiberPlate : 38 possible sky positions to use as objects from a possible 616. plFiberPlate : 56 possible sky positions to use as objects from a possible 615. plFiberPlate : 28 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 17 possible sky positions to use as objects from a possible 612. plFiberPlate : 13 possible sky positions to use as objects from a possible 611. plFiberPlate : 5 possible sky positions to use as objects from a possible 610. plFiberPlate : 7 possible sky positions to use as objects from a possible 609. plFiberPlate : 9 possible sky positions to use as objects from a possible 608. plFiberPlate : 23 possible sky positions to use as objects from a possible 607. plFiberPlate : 67 possible sky positions to use as objects from a possible 606. plFiberPlate : 37 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 22 possible sky positions to use as objects from a possible 602. plFiberPlate : 14 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2098.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2099.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2099.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2100.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 131 2 10 105 3 10 101 4 11 109 5 2 102 6 3 85 7 10 100 8 13 106 9 7 108 10 15 167 11 10 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 31 29 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 373 2 plFiberPlate : adding spectro-photo std with objId = 4550 40 3 94 141 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 187 21 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 369 65 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 372 50 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 367 20 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 366 40 plFiberPlate : 142 possible sky positions to use as objects from a possible 611. plFiberPlate : 92 possible sky positions to use as objects from a possible 610. plFiberPlate : 64 possible sky positions to use as objects from a possible 609. plFiberPlate : 18 possible sky positions to use as objects from a possible 608. plFiberPlate : 23 possible sky positions to use as objects from a possible 607. plFiberPlate : 43 possible sky positions to use as objects from a possible 606. plFiberPlate : 76 possible sky positions to use as objects from a possible 605. plFiberPlate : 75 possible sky positions to use as objects from a possible 604. plFiberPlate : 60 possible sky positions to use as objects from a possible 603. plFiberPlate : 55 possible sky positions to use as objects from a possible 602. plFiberPlate : 29 possible sky positions to use as objects from a possible 601. plFiberPlate : 2 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 20 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 32 possible sky positions to use as objects from a possible 596. plFiberPlate : 47 possible sky positions to use as objects from a possible 595. plFiberPlate : 36 possible sky positions to use as objects from a possible 594. plFiberPlate : 29 possible sky positions to use as objects from a possible 593. plFiberPlate : 21 possible sky positions to use as objects from a possible 592. plFiberPlate : 21 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 12 possible sky positions to use as objects from a possible 589. plFiberPlate : 7 possible sky positions to use as objects from a possible 588. plFiberPlate : 23 possible sky positions to use as objects from a possible 587. plFiberPlate : 26 possible sky positions to use as objects from a possible 586. plFiberPlate : 29 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 17 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 23 possible sky positions to use as objects from a possible 581. plFiberPlate : 14 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2099.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2100.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2100.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2101.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 138 2 4 103 3 2 85 4 8 92 5 13 130 6 11 105 7 7 79 8 6 110 9 11 113 10 7 141 11 6 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4512 40 6 50 8 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 96 136 plFiberPlate : adding spectro-photo std with objId = 4512 40 4 57 54 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 127 19 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 123 7 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 92 27 plFiberPlate : adding spectro-photo std with objId = 4470 40 4 126 7 plFiberPlate : adding spectro-photo std with objId = 4470 40 5 113 40 plFiberPlate : 103 possible sky positions to use as objects from a possible 615. plFiberPlate : 94 possible sky positions to use as objects from a possible 614. plFiberPlate : 74 possible sky positions to use as objects from a possible 613. plFiberPlate : 58 possible sky positions to use as objects from a possible 612. plFiberPlate : 31 possible sky positions to use as objects from a possible 611. plFiberPlate : 33 possible sky positions to use as objects from a possible 610. plFiberPlate : 55 possible sky positions to use as objects from a possible 609. plFiberPlate : 79 possible sky positions to use as objects from a possible 608. plFiberPlate : 60 possible sky positions to use as objects from a possible 607. plFiberPlate : 47 possible sky positions to use as objects from a possible 606. plFiberPlate : 40 possible sky positions to use as objects from a possible 605. plFiberPlate : 36 possible sky positions to use as objects from a possible 604. plFiberPlate : 23 possible sky positions to use as objects from a possible 603. plFiberPlate : 24 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 26 possible sky positions to use as objects from a possible 600. plFiberPlate : 64 possible sky positions to use as objects from a possible 599. plFiberPlate : 58 possible sky positions to use as objects from a possible 598. plFiberPlate : 45 possible sky positions to use as objects from a possible 597. plFiberPlate : 27 possible sky positions to use as objects from a possible 596. plFiberPlate : 9 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 25 possible sky positions to use as objects from a possible 593. plFiberPlate : 3 possible sky positions to use as objects from a possible 592. plFiberPlate : 23 possible sky positions to use as objects from a possible 591. plFiberPlate : 70 possible sky positions to use as objects from a possible 590. plFiberPlate : 50 possible sky positions to use as objects from a possible 589. plFiberPlate : 29 possible sky positions to use as objects from a possible 588. plFiberPlate : 5 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 4 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2100.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2101.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2101.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2102.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 127 2 11 103 3 9 94 4 5 96 5 4 136 6 4 115 7 6 95 8 5 107 9 4 95 10 11 155 11 12 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4512 40 3 37 71 plFiberPlate : adding spectro-photo std with objId = 4382 40 2 86 92 plFiberPlate : adding spectro-photo std with objId = 4382 40 1 78 58 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 260 15 plFiberPlate : adding spectro-photo std with objId = 4470 40 6 105 12 plFiberPlate : adding spectro-photo std with objId = 4512 40 6 37 89 plFiberPlate : adding spectro-photo std with objId = 4470 40 3 109 4 plFiberPlate : adding spectro-photo std with objId = 4470 40 5 113 40 plFiberPlate : 96 possible sky positions to use as objects from a possible 608. plFiberPlate : 60 possible sky positions to use as objects from a possible 607. plFiberPlate : 41 possible sky positions to use as objects from a possible 606. plFiberPlate : 26 possible sky positions to use as objects from a possible 605. plFiberPlate : 41 possible sky positions to use as objects from a possible 604. plFiberPlate : 25 possible sky positions to use as objects from a possible 603. plFiberPlate : 39 possible sky positions to use as objects from a possible 602. plFiberPlate : 48 possible sky positions to use as objects from a possible 601. plFiberPlate : 43 possible sky positions to use as objects from a possible 600. plFiberPlate : 40 possible sky positions to use as objects from a possible 599. plFiberPlate : 28 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 29 possible sky positions to use as objects from a possible 593. plFiberPlate : 50 possible sky positions to use as objects from a possible 592. plFiberPlate : 41 possible sky positions to use as objects from a possible 591. plFiberPlate : 21 possible sky positions to use as objects from a possible 590. plFiberPlate : 5 possible sky positions to use as objects from a possible 589. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 588. plFiberPlate: No sky found for bundle at 30.908 67.513, increase box by 80 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 588. plFiberPlate : 2 possible sky positions to use as objects from a possible 587. plFiberPlate : 4 possible sky positions to use as objects from a possible 586. plFiberPlate : 2 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : 98 possible sky positions to use as objects from a possible 583. plFiberPlate : 19 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 14 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 9 possible sky positions to use as objects from a possible 578. plFiberPlate : 20 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2101.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2102.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2102.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2103.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 121 2 2 99 3 5 92 4 6 101 5 9 119 6 8 90 7 7 104 8 9 122 9 9 111 10 10 147 11 5 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 421 49 plFiberPlate : adding spectro-photo std with objId = 4504 40 3 142 46 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 76 45 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 209 42 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 139 42 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 429 65 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 79 69 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 211 39 plFiberPlate : 125 possible sky positions to use as objects from a possible 627. plFiberPlate : 74 possible sky positions to use as objects from a possible 626. plFiberPlate : 28 possible sky positions to use as objects from a possible 625. plFiberPlate : 21 possible sky positions to use as objects from a possible 624. plFiberPlate : 35 possible sky positions to use as objects from a possible 623. plFiberPlate : 32 possible sky positions to use as objects from a possible 622. plFiberPlate : 38 possible sky positions to use as objects from a possible 621. plFiberPlate : 67 possible sky positions to use as objects from a possible 620. plFiberPlate : 37 possible sky positions to use as objects from a possible 619. plFiberPlate : 28 possible sky positions to use as objects from a possible 618. plFiberPlate : 15 possible sky positions to use as objects from a possible 617. plFiberPlate : 16 possible sky positions to use as objects from a possible 616. plFiberPlate : 15 possible sky positions to use as objects from a possible 615. plFiberPlate : 12 possible sky positions to use as objects from a possible 614. plFiberPlate : 23 possible sky positions to use as objects from a possible 613. plFiberPlate : 9 possible sky positions to use as objects from a possible 612. plFiberPlate : 79 possible sky positions to use as objects from a possible 611. plFiberPlate : 53 possible sky positions to use as objects from a possible 610. plFiberPlate : 31 possible sky positions to use as objects from a possible 609. plFiberPlate : 21 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 4 possible sky positions to use as objects from a possible 606. plFiberPlate : 17 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 26 possible sky positions to use as objects from a possible 603. plFiberPlate : 48 possible sky positions to use as objects from a possible 602. plFiberPlate : 40 possible sky positions to use as objects from a possible 601. plFiberPlate : 25 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 27 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2102.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2103.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2103.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2104.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 126 2 13 119 3 13 104 4 12 106 5 10 120 6 4 101 7 10 98 8 19 103 9 10 110 10 12 155 11 11 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 113 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 180 5 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 246 56 plFiberPlate : adding spectro-photo std with objId = 4623 40 2 259 47 plFiberPlate : adding spectro-photo std with objId = 4599 40 1 178 26 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 255 23 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 255 37 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 246 26 plFiberPlate : 63 possible sky positions to use as objects from a possible 625. plFiberPlate : 52 possible sky positions to use as objects from a possible 624. plFiberPlate : 48 possible sky positions to use as objects from a possible 623. plFiberPlate : 45 possible sky positions to use as objects from a possible 622. plFiberPlate : 55 possible sky positions to use as objects from a possible 621. plFiberPlate : 37 possible sky positions to use as objects from a possible 620. plFiberPlate : 26 possible sky positions to use as objects from a possible 619. plFiberPlate : 39 possible sky positions to use as objects from a possible 618. plFiberPlate : 21 possible sky positions to use as objects from a possible 617. plFiberPlate : 17 possible sky positions to use as objects from a possible 616. plFiberPlate : 8 possible sky positions to use as objects from a possible 615. plFiberPlate : 9 possible sky positions to use as objects from a possible 614. plFiberPlate : 5 possible sky positions to use as objects from a possible 613. plFiberPlate : 7 possible sky positions to use as objects from a possible 612. plFiberPlate : 13 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 55 possible sky positions to use as objects from a possible 609. plFiberPlate : 38 possible sky positions to use as objects from a possible 608. plFiberPlate : 20 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 4 possible sky positions to use as objects from a possible 605. plFiberPlate : 4 possible sky positions to use as objects from a possible 604. plFiberPlate : 1 possible sky positions to use as objects from a possible 603. plFiberPlate : 3 possible sky positions to use as objects from a possible 602. plFiberPlate : 23 possible sky positions to use as objects from a possible 601. plFiberPlate : 56 possible sky positions to use as objects from a possible 600. plFiberPlate : 45 possible sky positions to use as objects from a possible 599. plFiberPlate : 41 possible sky positions to use as objects from a possible 598. plFiberPlate : 32 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 42 possible sky positions to use as objects from a possible 595. plFiberPlate : 24 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2103.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2104.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2104.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2105.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 121 2 1 100 3 2 96 4 3 125 5 10 118 6 8 99 7 7 111 8 8 129 9 12 101 10 5 139 11 3 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 219 24 plFiberPlate : adding spectro-photo std with objId = 4504 40 1 170 29 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 445 36 plFiberPlate : adding spectro-photo std with objId = 4552 40 5 86 61 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 162 2 plFiberPlate : adding spectro-photo std with objId = 4392 40 1 224 17 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 89 10 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 435 62 plFiberPlate : 140 possible sky positions to use as objects from a possible 633. plFiberPlate : 75 possible sky positions to use as objects from a possible 632. plFiberPlate : 38 possible sky positions to use as objects from a possible 631. plFiberPlate : 19 possible sky positions to use as objects from a possible 630. plFiberPlate : 39 possible sky positions to use as objects from a possible 629. plFiberPlate : 27 possible sky positions to use as objects from a possible 628. plFiberPlate : 49 possible sky positions to use as objects from a possible 627. plFiberPlate : 74 possible sky positions to use as objects from a possible 626. plFiberPlate : 37 possible sky positions to use as objects from a possible 625. plFiberPlate : 26 possible sky positions to use as objects from a possible 624. plFiberPlate : 15 possible sky positions to use as objects from a possible 623. plFiberPlate : 9 possible sky positions to use as objects from a possible 622. plFiberPlate : 11 possible sky positions to use as objects from a possible 621. plFiberPlate : 8 possible sky positions to use as objects from a possible 620. plFiberPlate : 7 possible sky positions to use as objects from a possible 619. plFiberPlate : 37 possible sky positions to use as objects from a possible 618. plFiberPlate : 55 possible sky positions to use as objects from a possible 617. plFiberPlate : 21 possible sky positions to use as objects from a possible 616. plFiberPlate : 16 possible sky positions to use as objects from a possible 615. plFiberPlate : 13 possible sky positions to use as objects from a possible 614. plFiberPlate : 9 possible sky positions to use as objects from a possible 613. plFiberPlate : 7 possible sky positions to use as objects from a possible 612. plFiberPlate : 8 possible sky positions to use as objects from a possible 611. plFiberPlate : 5 possible sky positions to use as objects from a possible 610. plFiberPlate : 37 possible sky positions to use as objects from a possible 609. plFiberPlate : 61 possible sky positions to use as objects from a possible 608. plFiberPlate : 39 possible sky positions to use as objects from a possible 607. plFiberPlate : 34 possible sky positions to use as objects from a possible 606. plFiberPlate : 23 possible sky positions to use as objects from a possible 605. plFiberPlate : 26 possible sky positions to use as objects from a possible 604. plFiberPlate : 30 possible sky positions to use as objects from a possible 603. plFiberPlate : 35 possible sky positions to use as objects from a possible 602. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 663 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2104.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2105.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2105.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2106.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 118 2 3 102 3 8 96 4 13 109 5 11 141 6 5 113 7 7 99 8 9 113 9 10 118 10 12 124 11 5 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4550 40 2 64 151 plFiberPlate : adding spectro-photo std with objId = 4550 40 1 64 42 plFiberPlate : adding spectro-photo std with objId = 4550 40 2 56 90 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 68 8 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 348 27 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 163 4 plFiberPlate : adding spectro-photo std with objId = 4550 40 3 64 84 plFiberPlate : adding spectro-photo std with objId = 4632 40 6 167 8 plFiberPlate : 110 possible sky positions to use as objects from a possible 629. plFiberPlate : 55 possible sky positions to use as objects from a possible 628. plFiberPlate : 34 possible sky positions to use as objects from a possible 627. plFiberPlate : 30 possible sky positions to use as objects from a possible 626. plFiberPlate : 31 possible sky positions to use as objects from a possible 625. plFiberPlate : 33 possible sky positions to use as objects from a possible 624. plFiberPlate : 45 possible sky positions to use as objects from a possible 623. plFiberPlate : 64 possible sky positions to use as objects from a possible 622. plFiberPlate : 30 possible sky positions to use as objects from a possible 621. plFiberPlate : 24 possible sky positions to use as objects from a possible 620. plFiberPlate : 9 possible sky positions to use as objects from a possible 619. plFiberPlate : 5 possible sky positions to use as objects from a possible 618. plFiberPlate : 8 possible sky positions to use as objects from a possible 617. plFiberPlate : 6 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 18 possible sky positions to use as objects from a possible 614. plFiberPlate : 64 possible sky positions to use as objects from a possible 613. plFiberPlate : 40 possible sky positions to use as objects from a possible 612. plFiberPlate : 27 possible sky positions to use as objects from a possible 611. plFiberPlate : 9 possible sky positions to use as objects from a possible 610. plFiberPlate : 8 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : 11 possible sky positions to use as objects from a possible 607. plFiberPlate : 22 possible sky positions to use as objects from a possible 606. plFiberPlate : 23 possible sky positions to use as objects from a possible 605. plFiberPlate : 87 possible sky positions to use as objects from a possible 604. plFiberPlate : 55 possible sky positions to use as objects from a possible 603. plFiberPlate : 31 possible sky positions to use as objects from a possible 602. plFiberPlate : 20 possible sky positions to use as objects from a possible 601. plFiberPlate : 15 possible sky positions to use as objects from a possible 600. plFiberPlate : 23 possible sky positions to use as objects from a possible 599. plFiberPlate : 20 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2105.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2106.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2106.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2107.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 118 2 7 109 3 11 105 4 14 116 5 12 124 6 9 100 7 3 90 8 5 97 9 9 95 10 14 157 11 12 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 181 42 plFiberPlate : adding spectro-photo std with objId = 4550 40 3 74 8 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 359 46 plFiberPlate : adding spectro-photo std with objId = 4632 40 6 186 40 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 87 23 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 367 20 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 366 40 plFiberPlate : adding spectro-photo std with objId = 4550 40 4 75 48 plFiberPlate : 132 possible sky positions to use as objects from a possible 613. plFiberPlate : 85 possible sky positions to use as objects from a possible 612. plFiberPlate : 53 possible sky positions to use as objects from a possible 611. plFiberPlate : 35 possible sky positions to use as objects from a possible 610. plFiberPlate : 29 possible sky positions to use as objects from a possible 609. plFiberPlate : 31 possible sky positions to use as objects from a possible 608. plFiberPlate : 48 possible sky positions to use as objects from a possible 607. plFiberPlate : 66 possible sky positions to use as objects from a possible 606. plFiberPlate : 44 possible sky positions to use as objects from a possible 605. plFiberPlate : 24 possible sky positions to use as objects from a possible 604. plFiberPlate : 17 possible sky positions to use as objects from a possible 603. plFiberPlate : 13 possible sky positions to use as objects from a possible 602. plFiberPlate : 2 possible sky positions to use as objects from a possible 601. plFiberPlate : 3 possible sky positions to use as objects from a possible 600. plFiberPlate : 9 possible sky positions to use as objects from a possible 599. plFiberPlate : 30 possible sky positions to use as objects from a possible 598. plFiberPlate : 61 possible sky positions to use as objects from a possible 597. plFiberPlate : 39 possible sky positions to use as objects from a possible 596. plFiberPlate : 26 possible sky positions to use as objects from a possible 595. plFiberPlate : 11 possible sky positions to use as objects from a possible 594. plFiberPlate : 8 possible sky positions to use as objects from a possible 593. plFiberPlate : 4 possible sky positions to use as objects from a possible 592. plFiberPlate : 4 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 44 possible sky positions to use as objects from a possible 588. plFiberPlate : 37 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : 7 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 17 possible sky positions to use as objects from a possible 583. plFiberPlate : 17 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2106.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2107.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2107.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2108.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 134 2 9 106 3 8 96 4 8 112 5 13 120 6 9 104 7 9 105 8 9 132 9 11 119 10 12 155 11 10 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 358 37 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 154 15 plFiberPlate : adding spectro-photo std with objId = 4504 40 6 151 38 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 208 19 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 350 24 plFiberPlate : adding spectro-photo std with objId = 4504 40 5 158 27 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 209 42 plFiberPlate : adding spectro-photo std with objId = 4504 40 4 156 2 plFiberPlate : 112 possible sky positions to use as objects from a possible 652. plFiberPlate : 96 possible sky positions to use as objects from a possible 651. plFiberPlate : 50 possible sky positions to use as objects from a possible 650. plFiberPlate : 30 possible sky positions to use as objects from a possible 649. plFiberPlate : 17 possible sky positions to use as objects from a possible 648. plFiberPlate : 41 possible sky positions to use as objects from a possible 647. plFiberPlate : 79 possible sky positions to use as objects from a possible 646. plFiberPlate : 74 possible sky positions to use as objects from a possible 645. plFiberPlate : 51 possible sky positions to use as objects from a possible 644. plFiberPlate : 30 possible sky positions to use as objects from a possible 643. plFiberPlate : 23 possible sky positions to use as objects from a possible 642. plFiberPlate : 21 possible sky positions to use as objects from a possible 641. plFiberPlate : 4 possible sky positions to use as objects from a possible 640. plFiberPlate : 15 possible sky positions to use as objects from a possible 639. plFiberPlate : 9 possible sky positions to use as objects from a possible 638. plFiberPlate : 19 possible sky positions to use as objects from a possible 637. plFiberPlate : 63 possible sky positions to use as objects from a possible 636. plFiberPlate : 48 possible sky positions to use as objects from a possible 635. plFiberPlate : 31 possible sky positions to use as objects from a possible 634. plFiberPlate : 26 possible sky positions to use as objects from a possible 633. plFiberPlate : 16 possible sky positions to use as objects from a possible 632. plFiberPlate : 12 possible sky positions to use as objects from a possible 631. plFiberPlate : 24 possible sky positions to use as objects from a possible 630. plFiberPlate : 9 possible sky positions to use as objects from a possible 629. plFiberPlate : 41 possible sky positions to use as objects from a possible 628. plFiberPlate : 58 possible sky positions to use as objects from a possible 627. plFiberPlate : 38 possible sky positions to use as objects from a possible 626. plFiberPlate : 24 possible sky positions to use as objects from a possible 625. plFiberPlate : 11 possible sky positions to use as objects from a possible 624. plFiberPlate : 21 possible sky positions to use as objects from a possible 623. plFiberPlate : 27 possible sky positions to use as objects from a possible 622. plFiberPlate : 34 possible sky positions to use as objects from a possible 621. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2107.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2108.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2108.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2109.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 142 2 5 105 3 5 99 4 10 114 5 9 129 6 4 111 7 3 101 8 7 113 9 7 111 10 8 158 11 7 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 208 11 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 215 6 plFiberPlate : adding spectro-photo std with objId = 4552 40 3 200 46 plFiberPlate : adding spectro-photo std with objId = 4599 40 6 210 40 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 557 42 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 278 9 plFiberPlate : adding spectro-photo std with objId = 4552 40 4 204 90 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 213 137 plFiberPlate : 128 possible sky positions to use as objects from a possible 644. plFiberPlate : 87 possible sky positions to use as objects from a possible 643. plFiberPlate : 51 possible sky positions to use as objects from a possible 642. plFiberPlate : 27 possible sky positions to use as objects from a possible 641. plFiberPlate : 29 possible sky positions to use as objects from a possible 640. plFiberPlate : 33 possible sky positions to use as objects from a possible 639. plFiberPlate : 58 possible sky positions to use as objects from a possible 638. plFiberPlate : 79 possible sky positions to use as objects from a possible 637. plFiberPlate : 59 possible sky positions to use as objects from a possible 636. plFiberPlate : 29 possible sky positions to use as objects from a possible 635. plFiberPlate : 24 possible sky positions to use as objects from a possible 634. plFiberPlate : 12 possible sky positions to use as objects from a possible 633. plFiberPlate : 16 possible sky positions to use as objects from a possible 632. plFiberPlate : 20 possible sky positions to use as objects from a possible 631. plFiberPlate : 13 possible sky positions to use as objects from a possible 630. plFiberPlate : 13 possible sky positions to use as objects from a possible 629. plFiberPlate : 73 possible sky positions to use as objects from a possible 628. plFiberPlate : 39 possible sky positions to use as objects from a possible 627. plFiberPlate : 19 possible sky positions to use as objects from a possible 626. plFiberPlate : 18 possible sky positions to use as objects from a possible 625. plFiberPlate : 8 possible sky positions to use as objects from a possible 624. plFiberPlate : 13 possible sky positions to use as objects from a possible 623. plFiberPlate : 4 possible sky positions to use as objects from a possible 622. plFiberPlate : 21 possible sky positions to use as objects from a possible 621. plFiberPlate : 9 possible sky positions to use as objects from a possible 620. plFiberPlate : 78 possible sky positions to use as objects from a possible 619. plFiberPlate : 38 possible sky positions to use as objects from a possible 618. plFiberPlate : 23 possible sky positions to use as objects from a possible 617. plFiberPlate : 17 possible sky positions to use as objects from a possible 616. plFiberPlate : 7 possible sky positions to use as objects from a possible 615. plFiberPlate : 6 possible sky positions to use as objects from a possible 614. plFiberPlate : 28 possible sky positions to use as objects from a possible 613. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2108.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2109.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2109.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2110.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 118 2 14 94 3 4 95 4 12 118 5 15 121 6 10 100 7 7 100 8 10 109 9 8 100 10 15 152 11 17 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 209 8 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 123 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 199 65 plFiberPlate : adding spectro-photo std with objId = 4623 40 4 271 69 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 274 55 plFiberPlate : adding spectro-photo std with objId = 4599 40 2 196 2 plFiberPlate : adding spectro-photo std with objId = 4599 40 3 200 65 plFiberPlate : adding spectro-photo std with objId = 4646 40 6 59 47 plFiberPlate : 108 possible sky positions to use as objects from a possible 617. plFiberPlate : 63 possible sky positions to use as objects from a possible 616. plFiberPlate : 32 possible sky positions to use as objects from a possible 615. plFiberPlate : 20 possible sky positions to use as objects from a possible 614. plFiberPlate : 33 possible sky positions to use as objects from a possible 613. plFiberPlate : 23 possible sky positions to use as objects from a possible 612. plFiberPlate : 38 possible sky positions to use as objects from a possible 611. plFiberPlate : 77 possible sky positions to use as objects from a possible 610. plFiberPlate : 37 possible sky positions to use as objects from a possible 609. plFiberPlate : 24 possible sky positions to use as objects from a possible 608. plFiberPlate : 18 possible sky positions to use as objects from a possible 607. plFiberPlate : 22 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 29 possible sky positions to use as objects from a possible 602. plFiberPlate : 61 possible sky positions to use as objects from a possible 601. plFiberPlate : 27 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 6 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 3 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 8 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 57 possible sky positions to use as objects from a possible 592. plFiberPlate : 39 possible sky positions to use as objects from a possible 591. plFiberPlate : 32 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : 8 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2109.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2110.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2110.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2111.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 114 2 5 93 3 2 94 4 8 116 5 7 127 6 7 97 7 6 92 8 8 105 9 7 101 10 11 144 11 9 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 145 64 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 362 9 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 149 31 plFiberPlate : adding spectro-photo std with objId = 4550 40 4 86 56 plFiberPlate : adding spectro-photo std with objId = 4392 40 3 155 18 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 153 67 plFiberPlate : adding spectro-photo std with objId = 4550 40 5 93 37 plFiberPlate : adding spectro-photo std with objId = 4392 40 1 142 4 plFiberPlate : 124 possible sky positions to use as objects from a possible 600. plFiberPlate : 51 possible sky positions to use as objects from a possible 599. plFiberPlate : 41 possible sky positions to use as objects from a possible 598. plFiberPlate : 18 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 24 possible sky positions to use as objects from a possible 595. plFiberPlate : 49 possible sky positions to use as objects from a possible 594. plFiberPlate : 75 possible sky positions to use as objects from a possible 593. plFiberPlate : 34 possible sky positions to use as objects from a possible 592. plFiberPlate : 26 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 11 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 64 possible sky positions to use as objects from a possible 584. plFiberPlate : 35 possible sky positions to use as objects from a possible 583. plFiberPlate : 19 possible sky positions to use as objects from a possible 582. plFiberPlate : 7 possible sky positions to use as objects from a possible 581. plFiberPlate : 5 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 4 possible sky positions to use as objects from a possible 578. plFiberPlate : 24 possible sky positions to use as objects from a possible 577. plFiberPlate : 15 possible sky positions to use as objects from a possible 576. plFiberPlate : 61 possible sky positions to use as objects from a possible 575. plFiberPlate : 41 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 34 possible sky positions to use as objects from a possible 570. plFiberPlate : 13 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2110.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2111.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2111.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2112.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 109 2 13 90 3 13 99 4 9 112 5 6 122 6 5 105 7 4 94 8 4 121 9 4 99 10 14 146 11 12 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4599 40 5 199 65 plFiberPlate : adding spectro-photo std with objId = 4623 40 5 256 83 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 535 48 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 255 37 plFiberPlate : adding spectro-photo std with objId = 4623 40 6 253 56 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 539 27 plFiberPlate : adding spectro-photo std with objId = 4552 40 2 192 44 plFiberPlate : adding spectro-photo std with objId = 4552 40 1 183 36 plFiberPlate : 122 possible sky positions to use as objects from a possible 603. plFiberPlate : 89 possible sky positions to use as objects from a possible 602. plFiberPlate : 66 possible sky positions to use as objects from a possible 601. plFiberPlate : 39 possible sky positions to use as objects from a possible 600. plFiberPlate : 40 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 40 possible sky positions to use as objects from a possible 597. plFiberPlate : 76 possible sky positions to use as objects from a possible 596. plFiberPlate : 38 possible sky positions to use as objects from a possible 595. plFiberPlate : 15 possible sky positions to use as objects from a possible 594. plFiberPlate : 18 possible sky positions to use as objects from a possible 593. plFiberPlate : 6 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 2 possible sky positions to use as objects from a possible 590. plFiberPlate : 25 possible sky positions to use as objects from a possible 589. plFiberPlate : 25 possible sky positions to use as objects from a possible 588. plFiberPlate : 54 possible sky positions to use as objects from a possible 587. plFiberPlate : 26 possible sky positions to use as objects from a possible 586. plFiberPlate : 19 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 6 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 17 possible sky positions to use as objects from a possible 581. plFiberPlate : 7 possible sky positions to use as objects from a possible 580. plFiberPlate : 27 possible sky positions to use as objects from a possible 579. plFiberPlate : 43 possible sky positions to use as objects from a possible 578. plFiberPlate : 31 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 16 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 17 possible sky positions to use as objects from a possible 573. plFiberPlate : 34 possible sky positions to use as objects from a possible 572. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2111.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2112.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2112.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.4/plPlugMapP-2113.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 123 2 5 102 3 2 102 4 6 108 5 16 125 6 13 104 7 6 93 8 7 108 9 9 99 10 6 148 11 6 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 165 47 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 168 34 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 372 50 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 111 113 plFiberPlate : adding spectro-photo std with objId = 4504 40 2 102 53 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 380 56 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 385 70 plFiberPlate : adding spectro-photo std with objId = 4550 40 5 93 37 plFiberPlate : 129 possible sky positions to use as objects from a possible 613. plFiberPlate : 83 possible sky positions to use as objects from a possible 612. plFiberPlate : 39 possible sky positions to use as objects from a possible 611. plFiberPlate : 25 possible sky positions to use as objects from a possible 610. plFiberPlate : 14 possible sky positions to use as objects from a possible 609. plFiberPlate : 35 possible sky positions to use as objects from a possible 608. plFiberPlate : 46 possible sky positions to use as objects from a possible 607. plFiberPlate : 64 possible sky positions to use as objects from a possible 606. plFiberPlate : 33 possible sky positions to use as objects from a possible 605. plFiberPlate : 24 possible sky positions to use as objects from a possible 604. plFiberPlate : 18 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 3 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 6 possible sky positions to use as objects from a possible 599. plFiberPlate : 39 possible sky positions to use as objects from a possible 598. plFiberPlate : 68 possible sky positions to use as objects from a possible 597. plFiberPlate : 37 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 5 possible sky positions to use as objects from a possible 593. plFiberPlate : 3 possible sky positions to use as objects from a possible 592. plFiberPlate : 5 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 30 possible sky positions to use as objects from a possible 589. plFiberPlate : 80 possible sky positions to use as objects from a possible 588. plFiberPlate : 18 possible sky positions to use as objects from a possible 587. plFiberPlate : 10 possible sky positions to use as objects from a possible 586. plFiberPlate : 11 possible sky positions to use as objects from a possible 585. plFiberPlate : 16 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 28 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2112.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2113.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.4/plOverlay-2113.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Nov 18 17:11:51 CST 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 26 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2088.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.1538,-10.5149) and (-5.68,-11.20) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2088.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2088.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2089.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2089.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2089.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2090.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.8609,-10.8858) and (-4.46,-11.97) plMakeFanucCodes : fixed path between (-11.6937,5.1495) and (-12.21,3.44) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2090.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2090.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2091.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.7730,-4.2457) and (-12.40,-2.51) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2091.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2091.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2092.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2092.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2092.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2093.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2093.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2093.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2094.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2094.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2094.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2095.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2095.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2095.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2096.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2096.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2096.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2097.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9458,-6.5950) and (-11.18,-5.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2097.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2097.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2098.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2098.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2098.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2099.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2099.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2099.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2100.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1479,-3.6386) and (12.65,-0.98) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2100.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2100.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2101.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2101.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2101.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2102.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2102.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2102.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2103.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2103.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2103.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2104.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.1313,11.4740) and (-2.29,12.58) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2104.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2104.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 1 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 1 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2105.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4490,-5.3791) and (12.24,-3.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2105.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2105.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2106.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2106.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2106.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2107.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2107.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2107.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2108.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.7991,-4.7187) and (-12.14,-3.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2108.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2108.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2109.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2109.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2109.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2110.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2177,5.9590) and (-11.58,4.37) plMakeFanucCodes : fixed path between (-11.5835,4.3690) and (-12.48,1.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2110.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2110.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2111.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.2275,9.7767) and (-7.12,10.36) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2111.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2111.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2112.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2112.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2112.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2113.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2113.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.4/plFanuc-2113.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Nov 18 17:12:58 CST 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8c5ae94 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 26 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2088 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2089 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2090 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2091 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2092 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2093 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2094 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2095 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2096 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2097 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2098 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2099 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2100 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2101 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2102 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2103 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2104 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2105 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 663 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2106 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2107 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2108 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2109 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2110 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2111 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2112 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2113 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Nov 18 17:13:20 CST 2004 Begin running "plateEnder dr2004.11.4 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate Error: "plateEnder dr2004.11.4 -morePipes 1" failed. PS: Read file for stderr output of this job.