Sender: LSF System Subject: Job 43032: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Apr 22 16:48:32 2005 Results reported at Fri Apr 22 16:52:34 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.04.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 84.39 sec. Max Memory : 12 MB Max Swap : 28 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Fri Apr 22 16:49:07 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Apr 22 16:50:22 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/data/dp0.b/users/hlin/d5/nvo/j2sdk1.4.2_07/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/apache-ant-1.5.2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/data/dp0.b/users/hlin/d5/nvo/j2sdk1.4.2_07/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/bin:/data/dp0.b/users/hlin/d5/nvo/nvoss/apache-ant-1.5.2/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_218/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_22/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Fri Apr 22 16:50:23 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_218/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_22/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Fri Apr 22 16:50:26 CDT 2005 Begin running plate --------------------------------------------------------------- Fri Apr 22 16:50:27 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xa00b374 makePlates : beginning loop over plObs chain; makePlates : making 9 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1586.par makePlates : plateInfo struct for plate 2202 : (h4).mjd 53519 (h4).raCen 245.8007 (h4).decCen 14.2743 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 245.801 14.274 245.801 15.774 plMakePlateFromTile : mjd of obs : 53519.768541 Observed HA/dec of plate center, fiducial point (deg) : 23.998 14.266 23.998 15.765 The rotation angle of the fid. point is -45.574748 plMakePlateFromTile : beginning loop over 1181 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1587.par makePlates : plateInfo struct for plate 2203 : (h4).mjd 53519 (h4).raCen 247.27 (h4).decCen 13.6684 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 247.270 13.668 247.270 15.168 plMakePlateFromTile : mjd of obs : 53519.767070 Observed HA/dec of plate center, fiducial point (deg) : 21.998 13.660 21.998 15.160 The rotation angle of the fid. point is -42.666522 plMakePlateFromTile : beginning loop over 1193 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1588.par makePlates : plateInfo struct for plate 2204 : (h4).mjd 53519 (h4).raCen 248.818 (h4).decCen 13.31243 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 248.818 13.312 248.818 14.812 plMakePlateFromTile : mjd of obs : 53519.768587 Observed HA/dec of plate center, fiducial point (deg) : 20.998 13.305 20.998 14.805 The rotation angle of the fid. point is -41.053886 plMakePlateFromTile : beginning loop over 1250 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1589.par makePlates : plateInfo struct for plate 2205 : (h4).mjd 53519 (h4).raCen 242.124 (h4).decCen 20.82219 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.124 20.822 242.124 22.322 plMakePlateFromTile : mjd of obs : 53519.766661 Observed HA/dec of plate center, fiducial point (deg) : 26.998 20.810 26.998 22.310 The rotation angle of the fid. point is -57.867219 plMakePlateFromTile : beginning loop over 1200 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1590.par makePlates : plateInfo struct for plate 2206 : (h4).mjd 53519 (h4).raCen 243.5083 (h4).decCen 20.0253 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.508 20.025 243.508 21.525 plMakePlateFromTile : mjd of obs : 53519.767726 Observed HA/dec of plate center, fiducial point (deg) : 25.998 20.014 25.998 21.514 The rotation angle of the fid. point is -55.863889 plMakePlateFromTile : beginning loop over 1207 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1592.par makePlates : plateInfo struct for plate 2207 : (h4).mjd 53519 (h4).raCen 248.296 (h4).decCen 17.15919 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 248.296 17.159 248.296 18.659 plMakePlateFromTile : mjd of obs : 53519.767136 Observed HA/dec of plate center, fiducial point (deg) : 20.998 17.151 20.998 18.650 The rotation angle of the fid. point is -46.527665 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1593.par makePlates : plateInfo struct for plate 2208 : (h4).mjd 53519 (h4).raCen 246.3705 (h4).decCen 15.71743 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 246.370 15.717 246.370 17.217 plMakePlateFromTile : mjd of obs : 53519.767346 Observed HA/dec of plate center, fiducial point (deg) : 22.998 15.709 22.998 17.208 The rotation angle of the fid. point is -46.531340 plMakePlateFromTile : beginning loop over 1400 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1594.par makePlates : plateInfo struct for plate 2209 : (h4).mjd 53519 (h4).raCen 248.8005 (h4).decCen 14.71255 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 248.800 14.713 248.800 16.213 plMakePlateFromTile : mjd of obs : 53519.768537 Observed HA/dec of plate center, fiducial point (deg) : 20.998 14.705 20.998 16.204 The rotation angle of the fid. point is -42.906235 plMakePlateFromTile : beginning loop over 1250 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk116/complete//plPlugMapT-1595.par makePlates : plateInfo struct for plate 2210 : (h4).mjd 53519 (h4).raCen 250.4478 (h4).decCen 13.28474 (h4).haCen 34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.448 13.285 250.448 14.785 plMakePlateFromTile : mjd of obs : 53519.809126 Observed HA/dec of plate center, fiducial point (deg) : 33.998 13.279 33.998 14.779 The rotation angle of the fid. point is -52.063753 plMakePlateFromTile : beginning loop over 969 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Apr 22 16:50:49 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 9 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2202.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 87 2 4 35 3 0 8 4 7 40 5 28 115 6 32 91 7 30 70 8 28 77 9 27 91 10 9 61 11 7 64 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 3 at -121.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4670 40 3 323 290 plFiberPlate : adding spectro-photo std with objId = 4674 40 4 283 148 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 325 168 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 414 69 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 410 73 plFiberPlate : adding spectro-photo std with objId = 4674 40 3 286 151 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 320 133 plFiberPlate : adding spectro-photo std with objId = 4674 40 4 282 18 plFiberPlate : 24 possible sky positions to use as objects from a possible 382. plFiberPlate : 14 possible sky positions to use as objects from a possible 381. plFiberPlate : 14 possible sky positions to use as objects from a possible 380. plFiberPlate : 19 possible sky positions to use as objects from a possible 379. plFiberPlate : 11 possible sky positions to use as objects from a possible 378. plFiberPlate : 6 possible sky positions to use as objects from a possible 377. plFiberPlate : 25 possible sky positions to use as objects from a possible 376. plFiberPlate : 35 possible sky positions to use as objects from a possible 375. plFiberPlate : 14 possible sky positions to use as objects from a possible 374. plFiberPlate : 9 possible sky positions to use as objects from a possible 373. plFiberPlate : 3 possible sky positions to use as objects from a possible 372. plFiberPlate : 4 possible sky positions to use as objects from a possible 371. plFiberPlate : 7 possible sky positions to use as objects from a possible 370. plFiberPlate : 8 possible sky positions to use as objects from a possible 369. plFiberPlate : 2 possible sky positions to use as objects from a possible 368. plFiberPlate : 14 possible sky positions to use as objects from a possible 367. plFiberPlate : 39 possible sky positions to use as objects from a possible 366. plFiberPlate : 14 possible sky positions to use as objects from a possible 365. plFiberPlate : 7 possible sky positions to use as objects from a possible 364. plFiberPlate : 5 possible sky positions to use as objects from a possible 363. plFiberPlate : 5 possible sky positions to use as objects from a possible 362. plFiberPlate : 10 possible sky positions to use as objects from a possible 361. plFiberPlate : 2 possible sky positions to use as objects from a possible 360. plFiberPlate : 1 possible sky positions to use as objects from a possible 359. plFiberPlate : 17 possible sky positions to use as objects from a possible 358. plFiberPlate : 67 possible sky positions to use as objects from a possible 357. plFiberPlate : 30 possible sky positions to use as objects from a possible 356. plFiberPlate : 8 possible sky positions to use as objects from a possible 355. plFiberPlate : 9 possible sky positions to use as objects from a possible 354. plFiberPlate : 9 possible sky positions to use as objects from a possible 353. plFiberPlate : 20 possible sky positions to use as objects from a possible 352. plFiberPlate : 5 possible sky positions to use as objects from a possible 351. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2202.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2202.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2203.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 75 2 9 27 3 1 6 4 4 36 5 24 91 6 26 82 7 19 79 8 18 92 9 21 105 10 16 70 11 14 54 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 339 214 plFiberPlate : adding spectro-photo std with objId = 4674 40 4 300 202 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 421 253 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 427 62 plFiberPlate : adding spectro-photo std with objId = 4674 40 4 294 128 plFiberPlate : adding spectro-photo std with objId = 4674 40 3 286 151 plFiberPlate : adding spectro-photo std with objId = 4674 40 3 290 159 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 422 166 plFiberPlate : 25 possible sky positions to use as objects from a possible 364. plFiberPlate : 19 possible sky positions to use as objects from a possible 363. plFiberPlate : 12 possible sky positions to use as objects from a possible 362. plFiberPlate : 8 possible sky positions to use as objects from a possible 361. plFiberPlate : 8 possible sky positions to use as objects from a possible 360. plFiberPlate : 7 possible sky positions to use as objects from a possible 359. plFiberPlate : 22 possible sky positions to use as objects from a possible 358. plFiberPlate : 29 possible sky positions to use as objects from a possible 357. plFiberPlate : 16 possible sky positions to use as objects from a possible 356. plFiberPlate : 7 possible sky positions to use as objects from a possible 355. plFiberPlate : 2 possible sky positions to use as objects from a possible 354. plFiberPlate : 9 possible sky positions to use as objects from a possible 353. plFiberPlate : 3 possible sky positions to use as objects from a possible 352. plFiberPlate : 1 possible sky positions to use as objects from a possible 351. plFiberPlate : 8 possible sky positions to use as objects from a possible 350. plFiberPlate : 8 possible sky positions to use as objects from a possible 349. plFiberPlate : 45 possible sky positions to use as objects from a possible 348. plFiberPlate : 43 possible sky positions to use as objects from a possible 347. plFiberPlate : 31 possible sky positions to use as objects from a possible 346. plFiberPlate : 20 possible sky positions to use as objects from a possible 345. plFiberPlate : 7 possible sky positions to use as objects from a possible 344. plFiberPlate : 13 possible sky positions to use as objects from a possible 343. plFiberPlate : 6 possible sky positions to use as objects from a possible 342. plFiberPlate : 17 possible sky positions to use as objects from a possible 341. plFiberPlate : 15 possible sky positions to use as objects from a possible 340. plFiberPlate : 49 possible sky positions to use as objects from a possible 339. plFiberPlate : 36 possible sky positions to use as objects from a possible 338. plFiberPlate : 27 possible sky positions to use as objects from a possible 337. plFiberPlate : 23 possible sky positions to use as objects from a possible 336. plFiberPlate : 12 possible sky positions to use as objects from a possible 335. plFiberPlate : 13 possible sky positions to use as objects from a possible 334. plFiberPlate : 17 possible sky positions to use as objects from a possible 333. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2202.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2203.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2203.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2204.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 78 2 6 41 3 0 22 4 7 47 5 28 113 6 31 78 7 20 61 8 20 83 9 31 80 10 18 89 11 19 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 3 at -121.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4674 40 5 309 173 plFiberPlate : adding spectro-photo std with objId = 4674 40 4 300 202 plFiberPlate : adding spectro-photo std with objId = 4670 40 2 338 310 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 427 62 plFiberPlate : adding spectro-photo std with objId = 4674 40 3 310 162 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 370 130 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 435 166 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 432 152 plFiberPlate : 47 possible sky positions to use as objects from a possible 392. plFiberPlate : 29 possible sky positions to use as objects from a possible 391. plFiberPlate : 16 possible sky positions to use as objects from a possible 390. plFiberPlate : 16 possible sky positions to use as objects from a possible 389. plFiberPlate : 11 possible sky positions to use as objects from a possible 388. plFiberPlate : 17 possible sky positions to use as objects from a possible 387. plFiberPlate : 18 possible sky positions to use as objects from a possible 386. plFiberPlate : 48 possible sky positions to use as objects from a possible 385. plFiberPlate : 36 possible sky positions to use as objects from a possible 384. plFiberPlate : 23 possible sky positions to use as objects from a possible 383. plFiberPlate : 16 possible sky positions to use as objects from a possible 382. plFiberPlate : 4 possible sky positions to use as objects from a possible 381. plFiberPlate : 8 possible sky positions to use as objects from a possible 380. plFiberPlate : 11 possible sky positions to use as objects from a possible 379. plFiberPlate : 11 possible sky positions to use as objects from a possible 378. plFiberPlate : 2 possible sky positions to use as objects from a possible 377. plFiberPlate : 65 possible sky positions to use as objects from a possible 376. plFiberPlate : 53 possible sky positions to use as objects from a possible 375. plFiberPlate : 45 possible sky positions to use as objects from a possible 374. plFiberPlate : 36 possible sky positions to use as objects from a possible 373. plFiberPlate : 11 possible sky positions to use as objects from a possible 372. plFiberPlate : 10 possible sky positions to use as objects from a possible 371. plFiberPlate : 7 possible sky positions to use as objects from a possible 370. plFiberPlate : 11 possible sky positions to use as objects from a possible 369. plFiberPlate : 7 possible sky positions to use as objects from a possible 368. plFiberPlate : 40 possible sky positions to use as objects from a possible 367. plFiberPlate : 35 possible sky positions to use as objects from a possible 366. plFiberPlate : 22 possible sky positions to use as objects from a possible 365. plFiberPlate : 7 possible sky positions to use as objects from a possible 364. plFiberPlate : 10 possible sky positions to use as objects from a possible 363. plFiberPlate : 12 possible sky positions to use as objects from a possible 362. plFiberPlate : 12 possible sky positions to use as objects from a possible 361. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2203.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2204.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2204.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2205.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 95 2 11 55 3 3 14 4 7 58 5 20 102 6 9 89 7 5 87 8 14 90 9 14 95 10 16 96 11 15 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 792 56 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 789 37 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 791 97 plFiberPlate : adding spectro-photo std with objId = 4570 40 2 231 74 plFiberPlate : adding spectro-photo std with objId = 4570 40 4 231 29 plFiberPlate : adding spectro-photo std with objId = 4010 40 2 197 55 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 796 60 plFiberPlate : adding spectro-photo std with objId = 4571 40 2 14 151 plFiberPlate : 64 possible sky positions to use as objects from a possible 441. plFiberPlate : 22 possible sky positions to use as objects from a possible 440. plFiberPlate : 20 possible sky positions to use as objects from a possible 439. plFiberPlate : 14 possible sky positions to use as objects from a possible 438. plFiberPlate : 18 possible sky positions to use as objects from a possible 437. plFiberPlate : 24 possible sky positions to use as objects from a possible 436. plFiberPlate : 13 possible sky positions to use as objects from a possible 435. plFiberPlate : 44 possible sky positions to use as objects from a possible 434. plFiberPlate : 27 possible sky positions to use as objects from a possible 433. plFiberPlate : 19 possible sky positions to use as objects from a possible 432. plFiberPlate : 9 possible sky positions to use as objects from a possible 431. plFiberPlate : 10 possible sky positions to use as objects from a possible 430. plFiberPlate : 10 possible sky positions to use as objects from a possible 429. plFiberPlate : 7 possible sky positions to use as objects from a possible 428. plFiberPlate : 6 possible sky positions to use as objects from a possible 427. plFiberPlate : 11 possible sky positions to use as objects from a possible 426. plFiberPlate : 43 possible sky positions to use as objects from a possible 425. plFiberPlate : 21 possible sky positions to use as objects from a possible 424. plFiberPlate : 19 possible sky positions to use as objects from a possible 423. plFiberPlate : 10 possible sky positions to use as objects from a possible 422. plFiberPlate : 9 possible sky positions to use as objects from a possible 421. plFiberPlate : 2 possible sky positions to use as objects from a possible 420. plFiberPlate : 7 possible sky positions to use as objects from a possible 419. plFiberPlate : 6 possible sky positions to use as objects from a possible 418. plFiberPlate : 21 possible sky positions to use as objects from a possible 417. plFiberPlate : 50 possible sky positions to use as objects from a possible 416. plFiberPlate : 37 possible sky positions to use as objects from a possible 415. plFiberPlate : 29 possible sky positions to use as objects from a possible 414. plFiberPlate : 11 possible sky positions to use as objects from a possible 413. plFiberPlate : 20 possible sky positions to use as objects from a possible 412. plFiberPlate : 23 possible sky positions to use as objects from a possible 411. plFiberPlate : 29 possible sky positions to use as objects from a possible 410. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2204.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2205.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2205.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2206.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 70 2 11 30 3 2 8 4 7 37 5 20 114 6 14 90 7 12 99 8 17 111 9 13 100 10 14 72 11 14 54 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 804 149 plFiberPlate : adding spectro-photo std with objId = 4571 40 3 23 102 plFiberPlate : adding spectro-photo std with objId = 4570 40 4 231 29 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 796 60 plFiberPlate : adding spectro-photo std with objId = 4570 40 2 229 102 plFiberPlate : adding spectro-photo std with objId = 4571 40 4 18 19 plFiberPlate : adding spectro-photo std with objId = 4571 40 2 14 151 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 800 101 plFiberPlate : 31 possible sky positions to use as objects from a possible 418. plFiberPlate : 5 possible sky positions to use as objects from a possible 417. plFiberPlate : 9 possible sky positions to use as objects from a possible 416. plFiberPlate : 15 possible sky positions to use as objects from a possible 415. plFiberPlate : 3 possible sky positions to use as objects from a possible 414. plFiberPlate : 9 possible sky positions to use as objects from a possible 413. plFiberPlate : 15 possible sky positions to use as objects from a possible 412. plFiberPlate : 37 possible sky positions to use as objects from a possible 411. plFiberPlate : 13 possible sky positions to use as objects from a possible 410. plFiberPlate : 5 possible sky positions to use as objects from a possible 409. plFiberPlate : 2 possible sky positions to use as objects from a possible 408. plFiberPlate : 7 possible sky positions to use as objects from a possible 407. plFiberPlate : 2 possible sky positions to use as objects from a possible 406. plFiberPlate : 3 possible sky positions to use as objects from a possible 405. plFiberPlate : 4 possible sky positions to use as objects from a possible 404. plFiberPlate : 8 possible sky positions to use as objects from a possible 403. plFiberPlate : 72 possible sky positions to use as objects from a possible 402. plFiberPlate : 44 possible sky positions to use as objects from a possible 401. plFiberPlate : 22 possible sky positions to use as objects from a possible 400. plFiberPlate : 3 possible sky positions to use as objects from a possible 399. plFiberPlate : 15 possible sky positions to use as objects from a possible 398. plFiberPlate : 8 possible sky positions to use as objects from a possible 397. plFiberPlate : 6 possible sky positions to use as objects from a possible 396. plFiberPlate : 6 possible sky positions to use as objects from a possible 395. plFiberPlate : 14 possible sky positions to use as objects from a possible 394. plFiberPlate : 45 possible sky positions to use as objects from a possible 393. plFiberPlate : 24 possible sky positions to use as objects from a possible 392. plFiberPlate : 22 possible sky positions to use as objects from a possible 391. plFiberPlate : 20 possible sky positions to use as objects from a possible 390. plFiberPlate : 23 possible sky positions to use as objects from a possible 389. plFiberPlate : 19 possible sky positions to use as objects from a possible 388. plFiberPlate : 37 possible sky positions to use as objects from a possible 387. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2205.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2206.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2206.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2207.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 82 2 19 87 3 20 78 4 21 94 5 19 105 6 5 64 7 2 27 8 8 47 9 9 72 10 27 119 11 18 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4600 40 3 60 202 plFiberPlate : adding spectro-photo std with objId = 4600 40 4 65 194 plFiberPlate : adding spectro-photo std with objId = 4571 40 4 45 146 plFiberPlate : adding spectro-photo std with objId = 4633 40 5 149 128 plFiberPlate : adding spectro-photo std with objId = 4633 40 3 144 53 plFiberPlate : adding spectro-photo std with objId = 4633 40 5 142 95 plFiberPlate : adding spectro-photo std with objId = 4571 40 3 44 221 plFiberPlate : adding spectro-photo std with objId = 4571 40 2 56 75 plFiberPlate : 102 possible sky positions to use as objects from a possible 420. plFiberPlate : 62 possible sky positions to use as objects from a possible 419. plFiberPlate : 54 possible sky positions to use as objects from a possible 418. plFiberPlate : 27 possible sky positions to use as objects from a possible 417. plFiberPlate : 33 possible sky positions to use as objects from a possible 416. plFiberPlate : 14 possible sky positions to use as objects from a possible 415. plFiberPlate : 24 possible sky positions to use as objects from a possible 414. plFiberPlate : 82 possible sky positions to use as objects from a possible 413. plFiberPlate : 46 possible sky positions to use as objects from a possible 412. plFiberPlate : 32 possible sky positions to use as objects from a possible 411. plFiberPlate : 15 possible sky positions to use as objects from a possible 410. plFiberPlate : 11 possible sky positions to use as objects from a possible 409. plFiberPlate : 5 possible sky positions to use as objects from a possible 408. plFiberPlate : 11 possible sky positions to use as objects from a possible 407. plFiberPlate : 12 possible sky positions to use as objects from a possible 406. plFiberPlate : 12 possible sky positions to use as objects from a possible 405. plFiberPlate : 57 possible sky positions to use as objects from a possible 404. plFiberPlate : 44 possible sky positions to use as objects from a possible 403. plFiberPlate : 30 possible sky positions to use as objects from a possible 402. plFiberPlate : 15 possible sky positions to use as objects from a possible 401. plFiberPlate : 4 possible sky positions to use as objects from a possible 400. plFiberPlate : 3 possible sky positions to use as objects from a possible 399. plFiberPlate : 11 possible sky positions to use as objects from a possible 398. plFiberPlate : 11 possible sky positions to use as objects from a possible 397. plFiberPlate : 13 possible sky positions to use as objects from a possible 396. plFiberPlate : 56 possible sky positions to use as objects from a possible 395. plFiberPlate : 48 possible sky positions to use as objects from a possible 394. plFiberPlate : 39 possible sky positions to use as objects from a possible 393. plFiberPlate : 25 possible sky positions to use as objects from a possible 392. plFiberPlate : 12 possible sky positions to use as objects from a possible 391. plFiberPlate : 20 possible sky positions to use as objects from a possible 390. plFiberPlate : 7 possible sky positions to use as objects from a possible 389. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2206.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2207.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2207.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2208.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 99 2 28 88 3 24 80 4 33 98 5 25 107 6 13 69 7 14 85 8 22 91 9 21 100 10 54 128 11 36 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4671 40 3 123 164 plFiberPlate : adding spectro-photo std with objId = 4633 40 3 137 20 plFiberPlate : adding spectro-photo std with objId = 4670 40 4 325 168 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 415 211 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 410 73 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 418 129 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 413 30 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 409 157 plFiberPlate : 121 possible sky positions to use as objects from a possible 516. plFiberPlate : 73 possible sky positions to use as objects from a possible 515. plFiberPlate : 61 possible sky positions to use as objects from a possible 514. plFiberPlate : 41 possible sky positions to use as objects from a possible 513. plFiberPlate : 15 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 74 possible sky positions to use as objects from a possible 510. plFiberPlate : 68 possible sky positions to use as objects from a possible 509. plFiberPlate : 37 possible sky positions to use as objects from a possible 508. plFiberPlate : 22 possible sky positions to use as objects from a possible 507. plFiberPlate : 27 possible sky positions to use as objects from a possible 506. plFiberPlate : 9 possible sky positions to use as objects from a possible 505. plFiberPlate : 5 possible sky positions to use as objects from a possible 504. plFiberPlate : 5 possible sky positions to use as objects from a possible 503. plFiberPlate : 7 possible sky positions to use as objects from a possible 502. plFiberPlate : 12 possible sky positions to use as objects from a possible 501. plFiberPlate : 49 possible sky positions to use as objects from a possible 500. plFiberPlate : 29 possible sky positions to use as objects from a possible 499. plFiberPlate : 18 possible sky positions to use as objects from a possible 498. plFiberPlate : 9 possible sky positions to use as objects from a possible 497. plFiberPlate : 8 possible sky positions to use as objects from a possible 496. plFiberPlate : 6 possible sky positions to use as objects from a possible 495. plFiberPlate : 21 possible sky positions to use as objects from a possible 494. plFiberPlate : 12 possible sky positions to use as objects from a possible 493. plFiberPlate : 7 possible sky positions to use as objects from a possible 492. plFiberPlate : 40 possible sky positions to use as objects from a possible 491. plFiberPlate : 18 possible sky positions to use as objects from a possible 490. plFiberPlate : 6 possible sky positions to use as objects from a possible 489. plFiberPlate : 12 possible sky positions to use as objects from a possible 488. plFiberPlate : 8 possible sky positions to use as objects from a possible 487. plFiberPlate : 29 possible sky positions to use as objects from a possible 486. plFiberPlate : 13 possible sky positions to use as objects from a possible 485. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2207.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2208.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2208.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2209.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 74 2 22 75 3 22 77 4 20 95 5 22 103 6 21 82 7 16 40 8 3 11 9 19 69 10 42 126 11 25 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4671 40 3 136 81 plFiberPlate : adding spectro-photo std with objId = 4633 40 3 150 300 plFiberPlate : adding spectro-photo std with objId = 4671 40 2 143 161 plFiberPlate : adding spectro-photo std with objId = 4633 40 5 153 56 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 370 130 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 435 166 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 432 152 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 422 166 plFiberPlate : 97 possible sky positions to use as objects from a possible 396. plFiberPlate : 72 possible sky positions to use as objects from a possible 395. plFiberPlate : 61 possible sky positions to use as objects from a possible 394. plFiberPlate : 50 possible sky positions to use as objects from a possible 393. plFiberPlate : 13 possible sky positions to use as objects from a possible 392. plFiberPlate : 45 possible sky positions to use as objects from a possible 391. plFiberPlate : 31 possible sky positions to use as objects from a possible 390. plFiberPlate : 89 possible sky positions to use as objects from a possible 389. plFiberPlate : 50 possible sky positions to use as objects from a possible 388. plFiberPlate : 41 possible sky positions to use as objects from a possible 387. plFiberPlate : 30 possible sky positions to use as objects from a possible 386. plFiberPlate : 19 possible sky positions to use as objects from a possible 385. plFiberPlate : 10 possible sky positions to use as objects from a possible 384. plFiberPlate : 15 possible sky positions to use as objects from a possible 383. plFiberPlate : 13 possible sky positions to use as objects from a possible 382. plFiberPlate : 15 possible sky positions to use as objects from a possible 381. plFiberPlate : 59 possible sky positions to use as objects from a possible 380. plFiberPlate : 48 possible sky positions to use as objects from a possible 379. plFiberPlate : 34 possible sky positions to use as objects from a possible 378. plFiberPlate : 34 possible sky positions to use as objects from a possible 377. plFiberPlate : 27 possible sky positions to use as objects from a possible 376. plFiberPlate : 15 possible sky positions to use as objects from a possible 375. plFiberPlate : 10 possible sky positions to use as objects from a possible 374. plFiberPlate : 5 possible sky positions to use as objects from a possible 373. plFiberPlate : 7 possible sky positions to use as objects from a possible 372. plFiberPlate : 26 possible sky positions to use as objects from a possible 371. plFiberPlate : 28 possible sky positions to use as objects from a possible 370. plFiberPlate : 19 possible sky positions to use as objects from a possible 369. plFiberPlate : 9 possible sky positions to use as objects from a possible 368. plFiberPlate : 9 possible sky positions to use as objects from a possible 367. plFiberPlate : 16 possible sky positions to use as objects from a possible 366. plFiberPlate : 3 possible sky positions to use as objects from a possible 365. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2208.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2209.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2209.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.2/plPlugMapP-2210.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 191 to list of science objects plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : adding sky number 176 to list of science objects plFiberPlate : adding sky number 179 to list of science objects plFiberPlate : adding sky number 204 to list of science objects plFiberPlate : adding sky number 44 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 121 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 30 2 4 8 3 2 21 4 15 57 5 22 88 6 12 42 7 0 9 8 4 20 9 9 51 10 16 37 11 12 32 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 440 50 plFiberPlate : adding spectro-photo std with objId = 4649 40 5 441 13 plFiberPlate : adding spectro-photo std with objId = 4674 40 5 309 173 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 446 69 plFiberPlate : adding spectro-photo std with objId = 4674 40 3 310 162 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 440 253 plFiberPlate : adding spectro-photo std with objId = 4646 40 4 370 130 plFiberPlate : adding spectro-photo std with objId = 4649 40 3 435 166 plFiberPlate : 48 possible sky positions to use as objects from a possible 218. plFiberPlate : 40 possible sky positions to use as objects from a possible 217. plFiberPlate : 35 possible sky positions to use as objects from a possible 216. plFiberPlate : 19 possible sky positions to use as objects from a possible 215. plFiberPlate : 22 possible sky positions to use as objects from a possible 214. plFiberPlate : 2 possible sky positions to use as objects from a possible 213. plFiberPlate : 17 possible sky positions to use as objects from a possible 212. plFiberPlate : 29 possible sky positions to use as objects from a possible 211. plFiberPlate : 21 possible sky positions to use as objects from a possible 210. plFiberPlate : 13 possible sky positions to use as objects from a possible 209. plFiberPlate : 11 possible sky positions to use as objects from a possible 208. plFiberPlate : 2 possible sky positions to use as objects from a possible 207. plFiberPlate : 6 possible sky positions to use as objects from a possible 206. plFiberPlate : 1 possible sky positions to use as objects from a possible 205. plFiberPlate : 9 possible sky positions to use as objects from a possible 204. plFiberPlate : 2 possible sky positions to use as objects from a possible 203. plFiberPlate : 38 possible sky positions to use as objects from a possible 202. plFiberPlate : 22 possible sky positions to use as objects from a possible 201. plFiberPlate : 12 possible sky positions to use as objects from a possible 200. plFiberPlate : 4 possible sky positions to use as objects from a possible 199. plFiberPlate : 3 possible sky positions to use as objects from a possible 198. plFiberPlate : 1 possible sky positions to use as objects from a possible 197. plFiberPlate : 1 possible sky positions to use as objects from a possible 196. plFiberPlate : 4 possible sky positions to use as objects from a possible 195. plFiberPlate : 5 possible sky positions to use as objects from a possible 194. plFiberPlate : 36 possible sky positions to use as objects from a possible 193. plFiberPlate : 30 possible sky positions to use as objects from a possible 192. plFiberPlate : 33 possible sky positions to use as objects from a possible 191. plFiberPlate : 27 possible sky positions to use as objects from a possible 190. plFiberPlate : 8 possible sky positions to use as objects from a possible 189. plFiberPlate : 3 possible sky positions to use as objects from a possible 188. plFiberPlate : 7 possible sky positions to use as objects from a possible 187. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2209.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2210.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.2/plOverlay-2210.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Apr 22 16:51:14 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 9 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2202.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.8986,9.9128) and (-6.01,11.09) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2202.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2202.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2203.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2203.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2203.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2204.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2204.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2204.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2205.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.8685,-4.4131) and (-12.21,-2.02) plMakeFanucCodes : fixed path between (8.4165,-9.5210) and (5.57,-10.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2205.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2205.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2206.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2206.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.6865,8.8124) and (11.55,-1.60) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2206.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2207.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.2769,-10.2030) and (-5.74,-11.44) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2207.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2207.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2208.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2208.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2208.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2209.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.0373,-11.9023) and (1.29,-12.60) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2209.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2209.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2210.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2210.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.2/plFanuc-2210.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Apr 22 16:51:43 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa794d5c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 9 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2202 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2203 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2204 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2205 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2206 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2207 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2208 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2209 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2210 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Apr 22 16:51:59 CDT 2005 Begin running "plateEnder dr2005.04.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_218/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_218/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.04.2 -morePipes 1" failed. PS: Read file for stderr output of this job.