Sender: LSF System Subject: Job 224540: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Jan 10 17:37:17 2008 Results reported at Thu Jan 10 17:39:10 2008 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash ## # WARNING: THIS SCRIPT WAS AUTOMATICALLY GENERATED on Thu Jan 10 17:37:07 CST 2008 # dp version: v19_101 DP_DIR: /sdss/ups/prd/dp/v19_101/NULL # on host des01 user: hlin ## . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2008.01.5 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 52.92 sec. Max Memory : 11 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Thu Jan 10 17:37:32 CST 2008 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Jan 10 17:37:58 CST 2008 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/lsf/v5_1/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_6g/Linux-2-4-2-3-2:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/ups/v4_7_3/Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/das_admin/v1_5_0/NULL/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin/:/data/des03.a/data/hlin/gemini/gmmps-V-0-22-REL/gmmps/bin:/data/des03.a/data/hlin/gemini/skycat-3.0/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_7/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v6_3/Linux/idl_6.3/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/idlutils/v5_2_0_1/Linux/bin:/sdss/ups/prd/idlspec2d/v5_3_2b/Linux/bin:/sdss/ups/prd/spectro/v5_10_4b/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v19_101/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Thu Jan 10 17:37:59 CST 2008 ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DAS_ADMIN_DIR=/sdss/ups/prd/das_admin/v1_5_0/NULL DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v19_101/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_1/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_6g/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v6_3/Linux/idl_6.3 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v5_3_2b/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v5_2_0_1/Linux IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v6_3/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_7/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_10_4b/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/sdss/ups/prd/ups/v4_7_3/Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Thu Jan 10 17:37:59 CST 2008 Begin running plate --------------------------------------------------------------- Thu Jan 10 17:38:00 CST 2008 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0xa7545bc makePlates : beginning loop over plObs chain; makePlates : making 5 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapT-8456.par makePlates : plateInfo struct for plate 2942 : (h2).mjd 54511 (h2).raCen 71.403 (h2).decCen -5.683 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 71.403 -5.683 71.403 -4.183 plMakePlateFromTile : mjd of obs : 54511.502233 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -5.655 -0.004 -4.156 The rotation angle of the fid. point is 0.046551 plMakePlateFromTile : beginning loop over 1661 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapT-8457.par makePlates : plateInfo struct for plate 2943 : (h2).mjd 54511 (h2).raCen 107.242 (h2).decCen 39.407 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 107.242 39.407 107.242 40.907 plMakePlateFromTile : mjd of obs : 54511.560073 Observed HA/dec of plate center, fiducial point (deg) : -15.002 39.394 -15.004 40.894 The rotation angle of the fid. point is 114.080434 plMakePlateFromTile : beginning loop over 1756 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapT-8458.par makePlates : plateInfo struct for plate 2944 : (h2).mjd 54511 (h2).raCen 116.1866 (h2).decCen 66.1095 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.187 66.109 116.187 67.609 plMakePlateFromTile : mjd of obs : 54511.585016 Observed HA/dec of plate center, fiducial point (deg) : -15.002 66.082 -15.009 67.581 The rotation angle of the fid. point is 157.504253 plMakePlateFromTile : beginning loop over 1641 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapT-8459.par makePlates : plateInfo struct for plate 2945 : (h2).mjd 54511 (h2).raCen 119 (h2).decCen 9.5 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.000 9.500 119.000 11.000 plMakePlateFromTile : mjd of obs : 54511.550996 Observed HA/dec of plate center, fiducial point (deg) : -30.002 9.487 -30.004 10.986 The rotation angle of the fid. point is 45.485554 plMakePlateFromTile : beginning loop over 1821 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapT-8460.par makePlates : plateInfo struct for plate 2946 : (h2).mjd 54511 (h2).raCen 111.292 (h2).decCen 37.624 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 0 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 111.292 37.624 111.292 39.124 plMakePlateFromTile : mjd of obs : 54511.571284 Observed HA/dec of plate center, fiducial point (deg) : -15.002 37.608 -15.004 39.108 The rotation angle of the fid. point is 107.091128 plMakePlateFromTile : beginning loop over 1813 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Jan 10 17:38:16 CST 2008 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 5 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapP-2942.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 636 to list of science objects plFiberPlate : adding sky number 298 to list of science objects plFiberPlate : adding sky number 591 to list of science objects plFiberPlate : adding sky number 602 to list of science objects plFiberPlate : adding sky number 686 to list of science objects plFiberPlate : adding sky number 148 to list of science objects plFiberPlate : adding sky number 251 to list of science objects plFiberPlate : adding sky number 576 to list of science objects plFiberPlate : adding sky number 208 to list of science objects plFiberPlate : adding sky number 414 to list of science objects plFiberPlate : adding sky number 356 to list of science objects plFiberPlate : adding sky number 469 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 381 to list of science objects plFiberPlate : adding sky number 707 to list of science objects plFiberPlate : adding sky number 679 to list of science objects plFiberPlate : adding sky number 471 to list of science objects plFiberPlate : adding sky number 530 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : adding sky number 447 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 590 to list of science objects plFiberPlate : adding sky number 114 to list of science objects plFiberPlate : adding sky number 293 to list of science objects plFiberPlate : adding sky number 94 to list of science objects plFiberPlate : adding sky number 79 to list of science objects plFiberPlate : adding sky number 728 to list of science objects plFiberPlate : adding sky number 158 to list of science objects plFiberPlate : adding sky number 372 to list of science objects plFiberPlate : adding sky number 609 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 44 140 2 31 107 3 28 120 4 29 153 5 39 152 6 32 104 7 32 113 8 50 120 9 35 142 10 50 217 11 41 140 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6708 40 5 55 141 plFiberPlate : adding spectro-photo std with objId = 6708 40 5 54 58 plFiberPlate : adding spectro-photo std with objId = 6708 40 4 52 75 plFiberPlate : adding spectro-photo std with objId = 6708 40 5 47 14 plFiberPlate : adding spectro-photo std with objId = 6708 40 4 46 83 plFiberPlate : adding spectro-photo std with objId = 6708 40 3 46 134 plFiberPlate : adding spectro-photo std with objId = 6708 40 4 45 38 plFiberPlate : adding spectro-photo std with objId = 6708 40 3 45 102 plFiberPlate : 159 possible sky positions to use as objects from a possible 725. plFiberPlate : 98 possible sky positions to use as objects from a possible 724. plFiberPlate : 85 possible sky positions to use as objects from a possible 723. plFiberPlate : 46 possible sky positions to use as objects from a possible 722. plFiberPlate : 61 possible sky positions to use as objects from a possible 721. plFiberPlate : 45 possible sky positions to use as objects from a possible 720. plFiberPlate : 50 possible sky positions to use as objects from a possible 719. plFiberPlate : 94 possible sky positions to use as objects from a possible 718. plFiberPlate : 77 possible sky positions to use as objects from a possible 717. plFiberPlate : 58 possible sky positions to use as objects from a possible 716. plFiberPlate : 34 possible sky positions to use as objects from a possible 715. plFiberPlate : 8 possible sky positions to use as objects from a possible 714. plFiberPlate : 17 possible sky positions to use as objects from a possible 713. plFiberPlate : 10 possible sky positions to use as objects from a possible 712. plFiberPlate : 18 possible sky positions to use as objects from a possible 711. plFiberPlate : 36 possible sky positions to use as objects from a possible 710. plFiberPlate : 77 possible sky positions to use as objects from a possible 709. plFiberPlate : 75 possible sky positions to use as objects from a possible 708. plFiberPlate : 45 possible sky positions to use as objects from a possible 707. plFiberPlate : 36 possible sky positions to use as objects from a possible 706. plFiberPlate : 16 possible sky positions to use as objects from a possible 705. plFiberPlate : 27 possible sky positions to use as objects from a possible 704. plFiberPlate : 9 possible sky positions to use as objects from a possible 703. plFiberPlate : 24 possible sky positions to use as objects from a possible 702. plFiberPlate : 11 possible sky positions to use as objects from a possible 701. plFiberPlate : 54 possible sky positions to use as objects from a possible 700. plFiberPlate : 37 possible sky positions to use as objects from a possible 699. plFiberPlate : 20 possible sky positions to use as objects from a possible 698. plFiberPlate : 21 possible sky positions to use as objects from a possible 697. plFiberPlate : 24 possible sky positions to use as objects from a possible 696. plFiberPlate : 15 possible sky positions to use as objects from a possible 695. plFiberPlate : 25 possible sky positions to use as objects from a possible 694. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 726 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2942.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2942.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapP-2943.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 387 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 401 to list of science objects plFiberPlate : adding sky number 329 to list of science objects plFiberPlate : adding sky number 309 to list of science objects plFiberPlate : adding sky number 609 to list of science objects plFiberPlate : adding sky number 183 to list of science objects plFiberPlate : adding sky number 482 to list of science objects plFiberPlate : adding sky number 328 to list of science objects plFiberPlate : adding sky number 479 to list of science objects plFiberPlate : adding sky number 248 to list of science objects plFiberPlate : adding sky number 553 to list of science objects plFiberPlate : adding sky number 175 to list of science objects plFiberPlate : adding sky number 218 to list of science objects plFiberPlate : adding sky number 499 to list of science objects plFiberPlate : adding sky number 567 to list of science objects plFiberPlate : adding sky number 42 to list of science objects plFiberPlate : adding sky number 583 to list of science objects plFiberPlate : adding sky number 322 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 117 to list of science objects plFiberPlate : adding sky number 405 to list of science objects plFiberPlate : adding sky number 543 to list of science objects plFiberPlate : adding sky number 212 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 277 to list of science objects plFiberPlate : adding sky number 38 to list of science objects plFiberPlate : adding sky number 143 to list of science objects plFiberPlate : adding sky number 585 to list of science objects plFiberPlate : adding sky number 543 to list of science objects plFiberPlate : adding sky number 511 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 56 115 2 33 76 3 39 77 4 32 114 5 14 131 6 21 74 7 15 98 8 26 130 9 21 130 10 65 154 11 52 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6573 40 6 166 382 plFiberPlate : adding spectro-photo std with objId = 6573 40 6 166 294 plFiberPlate : adding spectro-photo std with objId = 6573 40 5 162 157 plFiberPlate : adding spectro-photo std with objId = 6573 40 5 162 58 plFiberPlate : adding spectro-photo std with objId = 6573 40 4 162 424 plFiberPlate : adding spectro-photo std with objId = 6573 40 4 162 237 plFiberPlate : adding spectro-photo std with objId = 6573 40 2 162 62 plFiberPlate : adding spectro-photo std with objId = 6573 40 3 161 206 plFiberPlate : 128 possible sky positions to use as objects from a possible 600. plFiberPlate : 79 possible sky positions to use as objects from a possible 599. plFiberPlate : 65 possible sky positions to use as objects from a possible 598. plFiberPlate : 39 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 26 possible sky positions to use as objects from a possible 595. plFiberPlate : 50 possible sky positions to use as objects from a possible 594. plFiberPlate : 52 possible sky positions to use as objects from a possible 593. plFiberPlate : 74 possible sky positions to use as objects from a possible 592. plFiberPlate : 55 possible sky positions to use as objects from a possible 591. plFiberPlate : 42 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 20 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 30 possible sky positions to use as objects from a possible 585. plFiberPlate : 88 possible sky positions to use as objects from a possible 584. plFiberPlate : 66 possible sky positions to use as objects from a possible 583. plFiberPlate : 53 possible sky positions to use as objects from a possible 582. plFiberPlate : 26 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 19 possible sky positions to use as objects from a possible 576. plFiberPlate : 33 possible sky positions to use as objects from a possible 575. plFiberPlate : 26 possible sky positions to use as objects from a possible 574. plFiberPlate : 21 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 21 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 815 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2942.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2943.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2943.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapP-2944.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 221 to list of science objects plFiberPlate : adding sky number 448 to list of science objects plFiberPlate : adding sky number 311 to list of science objects plFiberPlate : adding sky number 630 to list of science objects plFiberPlate : adding sky number 424 to list of science objects plFiberPlate : adding sky number 552 to list of science objects plFiberPlate : adding sky number 439 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 360 to list of science objects plFiberPlate : adding sky number 766 to list of science objects plFiberPlate : adding sky number 765 to list of science objects plFiberPlate : adding sky number 591 to list of science objects plFiberPlate : adding sky number 233 to list of science objects plFiberPlate : adding sky number 604 to list of science objects plFiberPlate : adding sky number 523 to list of science objects plFiberPlate : adding sky number 289 to list of science objects plFiberPlate : adding sky number 561 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 358 to list of science objects plFiberPlate : adding sky number 715 to list of science objects plFiberPlate : adding sky number 673 to list of science objects plFiberPlate : adding sky number 267 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 722 to list of science objects plFiberPlate : adding sky number 283 to list of science objects plFiberPlate : adding sky number 554 to list of science objects plFiberPlate : adding sky number 770 to list of science objects plFiberPlate : adding sky number 473 to list of science objects plFiberPlate : adding sky number 528 to list of science objects plFiberPlate : adding sky number 689 to list of science objects plFiberPlate : adding sky number 352 to list of science objects plFiberPlate : adding sky number 740 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 43 165 2 31 114 3 24 100 4 23 150 5 7 169 6 8 114 7 7 112 8 3 154 9 5 187 10 42 205 11 39 148 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4887 40 2 248 20 plFiberPlate : adding spectro-photo std with objId = 4887 40 6 246 116 plFiberPlate : adding spectro-photo std with objId = 4887 40 5 245 100 plFiberPlate : adding spectro-photo std with objId = 4887 40 5 244 130 plFiberPlate : adding spectro-photo std with objId = 4887 40 2 244 178 plFiberPlate : adding spectro-photo std with objId = 4887 40 4 243 16 plFiberPlate : adding spectro-photo std with objId = 4887 40 3 243 226 plFiberPlate : adding spectro-photo std with objId = 4887 40 3 243 6 plFiberPlate : 174 possible sky positions to use as objects from a possible 800. plFiberPlate : 124 possible sky positions to use as objects from a possible 799. plFiberPlate : 95 possible sky positions to use as objects from a possible 798. plFiberPlate : 35 possible sky positions to use as objects from a possible 797. plFiberPlate : 32 possible sky positions to use as objects from a possible 796. plFiberPlate : 58 possible sky positions to use as objects from a possible 795. plFiberPlate : 68 possible sky positions to use as objects from a possible 794. plFiberPlate : 123 possible sky positions to use as objects from a possible 793. plFiberPlate : 89 possible sky positions to use as objects from a possible 792. plFiberPlate : 79 possible sky positions to use as objects from a possible 791. plFiberPlate : 69 possible sky positions to use as objects from a possible 790. plFiberPlate : 24 possible sky positions to use as objects from a possible 789. plFiberPlate : 38 possible sky positions to use as objects from a possible 788. plFiberPlate : 32 possible sky positions to use as objects from a possible 787. plFiberPlate : 17 possible sky positions to use as objects from a possible 786. plFiberPlate : 30 possible sky positions to use as objects from a possible 785. plFiberPlate : 98 possible sky positions to use as objects from a possible 784. plFiberPlate : 92 possible sky positions to use as objects from a possible 783. plFiberPlate : 56 possible sky positions to use as objects from a possible 782. plFiberPlate : 38 possible sky positions to use as objects from a possible 781. plFiberPlate : 25 possible sky positions to use as objects from a possible 780. plFiberPlate : 20 possible sky positions to use as objects from a possible 779. plFiberPlate : 20 possible sky positions to use as objects from a possible 778. plFiberPlate : 26 possible sky positions to use as objects from a possible 777. plFiberPlate : 12 possible sky positions to use as objects from a possible 776. plFiberPlate : 93 possible sky positions to use as objects from a possible 775. plFiberPlate : 71 possible sky positions to use as objects from a possible 774. plFiberPlate : 58 possible sky positions to use as objects from a possible 773. plFiberPlate : 41 possible sky positions to use as objects from a possible 772. plFiberPlate : 36 possible sky positions to use as objects from a possible 771. plFiberPlate : 24 possible sky positions to use as objects from a possible 770. plFiberPlate : 19 possible sky positions to use as objects from a possible 769. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 762 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2943.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2944.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2944.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapP-2945.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 245 to list of science objects plFiberPlate : adding sky number 501 to list of science objects plFiberPlate : adding sky number 420 to list of science objects plFiberPlate : adding sky number 558 to list of science objects plFiberPlate : adding sky number 295 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 579 to list of science objects plFiberPlate : adding sky number 560 to list of science objects plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : adding sky number 534 to list of science objects plFiberPlate : adding sky number 388 to list of science objects plFiberPlate : adding sky number 261 to list of science objects plFiberPlate : adding sky number 374 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 473 to list of science objects plFiberPlate : adding sky number 184 to list of science objects plFiberPlate : adding sky number 268 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 164 to list of science objects plFiberPlate : adding sky number 331 to list of science objects plFiberPlate : adding sky number 247 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 537 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 292 to list of science objects plFiberPlate : adding sky number 447 to list of science objects plFiberPlate : adding sky number 579 to list of science objects plFiberPlate : adding sky number 548 to list of science objects plFiberPlate : adding sky number 401 to list of science objects plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 49 115 2 38 64 3 44 72 4 39 102 5 28 119 6 35 93 7 27 102 8 31 117 9 27 140 10 82 144 11 53 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 28 392 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 28 206 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 27 150 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 26 93 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 26 312 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 26 237 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 26 233 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 25 438 plFiberPlate : 112 possible sky positions to use as objects from a possible 584. plFiberPlate : 93 possible sky positions to use as objects from a possible 583. plFiberPlate : 67 possible sky positions to use as objects from a possible 582. plFiberPlate : 43 possible sky positions to use as objects from a possible 581. plFiberPlate : 26 possible sky positions to use as objects from a possible 580. plFiberPlate : 35 possible sky positions to use as objects from a possible 579. plFiberPlate : 57 possible sky positions to use as objects from a possible 578. plFiberPlate : 83 possible sky positions to use as objects from a possible 577. plFiberPlate : 69 possible sky positions to use as objects from a possible 576. plFiberPlate : 51 possible sky positions to use as objects from a possible 575. plFiberPlate : 34 possible sky positions to use as objects from a possible 574. plFiberPlate : 14 possible sky positions to use as objects from a possible 573. plFiberPlate : 12 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 20 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 94 possible sky positions to use as objects from a possible 568. plFiberPlate : 76 possible sky positions to use as objects from a possible 567. plFiberPlate : 60 possible sky positions to use as objects from a possible 566. plFiberPlate : 35 possible sky positions to use as objects from a possible 565. plFiberPlate : 18 possible sky positions to use as objects from a possible 564. plFiberPlate : 27 possible sky positions to use as objects from a possible 563. plFiberPlate : 20 possible sky positions to use as objects from a possible 562. plFiberPlate : 20 possible sky positions to use as objects from a possible 561. plFiberPlate : 13 possible sky positions to use as objects from a possible 560. plFiberPlate : 37 possible sky positions to use as objects from a possible 559. plFiberPlate : 44 possible sky positions to use as objects from a possible 558. plFiberPlate : 25 possible sky positions to use as objects from a possible 557. plFiberPlate : 13 possible sky positions to use as objects from a possible 556. plFiberPlate : 17 possible sky positions to use as objects from a possible 555. plFiberPlate : 13 possible sky positions to use as objects from a possible 554. plFiberPlate : 18 possible sky positions to use as objects from a possible 553. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 817 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2944.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2945.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2945.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2008.01.5/plPlugMapP-2946.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 575 to list of science objects plFiberPlate : adding sky number 282 to list of science objects plFiberPlate : adding sky number 225 to list of science objects plFiberPlate : adding sky number 177 to list of science objects plFiberPlate : adding sky number 446 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 557 to list of science objects plFiberPlate : adding sky number 95 to list of science objects plFiberPlate : adding sky number 602 to list of science objects plFiberPlate : adding sky number 124 to list of science objects plFiberPlate : adding sky number 564 to list of science objects plFiberPlate : adding sky number 56 to list of science objects plFiberPlate : adding sky number 717 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 392 to list of science objects plFiberPlate : adding sky number 132 to list of science objects plFiberPlate : adding sky number 180 to list of science objects plFiberPlate : adding sky number 598 to list of science objects plFiberPlate : adding sky number 548 to list of science objects plFiberPlate : adding sky number 491 to list of science objects plFiberPlate : adding sky number 722 to list of science objects plFiberPlate : adding sky number 477 to list of science objects plFiberPlate : adding sky number 566 to list of science objects plFiberPlate : adding sky number 69 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 385 to list of science objects plFiberPlate : adding sky number 57 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 340 to list of science objects plFiberPlate : adding sky number 604 to list of science objects plFiberPlate : adding sky number 421 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 58 129 2 50 106 3 19 116 4 21 132 5 39 136 6 24 131 7 20 118 8 45 138 9 15 157 10 51 209 11 60 142 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 26 52 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 26 308 plFiberPlate : adding spectro-photo std with objId = 4204 40 6 21 114 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 21 317 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 17 75 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 17 46 plFiberPlate : adding spectro-photo std with objId = 4204 40 5 15 68 plFiberPlate : adding spectro-photo std with objId = 4204 40 3 15 213 plFiberPlate : 161 possible sky positions to use as objects from a possible 735. plFiberPlate : 116 possible sky positions to use as objects from a possible 734. plFiberPlate : 72 possible sky positions to use as objects from a possible 733. plFiberPlate : 37 possible sky positions to use as objects from a possible 732. plFiberPlate : 56 possible sky positions to use as objects from a possible 731. plFiberPlate : 26 possible sky positions to use as objects from a possible 730. plFiberPlate : 56 possible sky positions to use as objects from a possible 729. plFiberPlate : 123 possible sky positions to use as objects from a possible 728. plFiberPlate : 110 possible sky positions to use as objects from a possible 727. plFiberPlate : 85 possible sky positions to use as objects from a possible 726. plFiberPlate : 55 possible sky positions to use as objects from a possible 725. plFiberPlate : 25 possible sky positions to use as objects from a possible 724. plFiberPlate : 21 possible sky positions to use as objects from a possible 723. plFiberPlate : 14 possible sky positions to use as objects from a possible 722. plFiberPlate : 22 possible sky positions to use as objects from a possible 721. plFiberPlate : 33 possible sky positions to use as objects from a possible 720. plFiberPlate : 95 possible sky positions to use as objects from a possible 719. plFiberPlate : 80 possible sky positions to use as objects from a possible 718. plFiberPlate : 57 possible sky positions to use as objects from a possible 717. plFiberPlate : 32 possible sky positions to use as objects from a possible 716. plFiberPlate : 22 possible sky positions to use as objects from a possible 715. plFiberPlate : 15 possible sky positions to use as objects from a possible 714. plFiberPlate : 24 possible sky positions to use as objects from a possible 713. plFiberPlate : 24 possible sky positions to use as objects from a possible 712. plFiberPlate : 30 possible sky positions to use as objects from a possible 711. plFiberPlate : 77 possible sky positions to use as objects from a possible 710. plFiberPlate : 52 possible sky positions to use as objects from a possible 709. plFiberPlate : 24 possible sky positions to use as objects from a possible 708. plFiberPlate : 31 possible sky positions to use as objects from a possible 707. plFiberPlate : 29 possible sky positions to use as objects from a possible 706. plFiberPlate : 15 possible sky positions to use as objects from a possible 705. plFiberPlate : 21 possible sky positions to use as objects from a possible 704. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 780 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2945.ps/CPS Open /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2946.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2008.01.5/plOverlay-2946.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Jan 10 17:38:28 CST 2008 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 5 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 64 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2942.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2942.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.5454,8.0252) and (-3.81,11.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2942.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 153 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2943.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2943.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2943.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 100 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2944.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2944.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2944.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 155 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2945.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2945.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2945.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 118 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2946.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2946.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2008.01.5/plFanuc-2946.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Jan 10 17:38:42 CST 2008 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x9d5692c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 5 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2942 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 726 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2943 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 815 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2944 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 762 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2945 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 817 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2946 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 0 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 780 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Jan 10 17:38:50 CST 2008 Begin running "plateEnder dr2008.01.5 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v19_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v19_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2008.01.5 -morePipes 1" failed. PS: Read file for stderr output of this job.