Sender: LSF System Subject: Job 22711: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Jan 19 11:35:46 2001 Results reported at Fri Jan 19 11:57:39 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /usr/local/etc/fermi.shrc ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v7_5 -f IRIX+6 -z /p/cluster_disk/upsdb setup plate v3_4 -f IRIX+6 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 1286.44 sec. Max Memory : 12 MB Max Swap : 21 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Fri Jan 19 11:35:47 CST 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Jan 19 11:35:48 CST 2001 PATH = /p/IRIX6/tclx/v7_4adfa/bin:/p/IRIX6/tk/v4_0dn/bin:/p/IRIX6/tcl/v7_4df/bin:/p/IRIX6/fsao/v3_14a/bin:/p/IRIX6/lsf/v3_2_2/SGI//bin:/p/IRIX6/ups/v4_4a/bin:/p/IRIX/emacs/v19_30a/bin:/p/IRIX/sdsscvs/v1_4/bin:/p/IRIX/rcs/v5_7/bin:/p/IRIX/diff/v2_7/bin:/p/IRIX6/diffutils/v2_7/bin:/p/IRIX6/cvs/v1_10/bin:.:/usr/sbin:/usr/bsd:/sbin:/usr/bin:/bin:/usr/bin/X11:/usr/local/bin:/home/s1/bgreen/bin:/etc:/usr/etc:/p/IRIX6/ssc/v4_6/bin:/p/IRIX6/astrom/v3_3/bin:/p/IRIX6/photo/v5_2_13/bin:/p/IRIX6/mt/v7_2/bin:/p/IRIX6/idlutils/v1_0/bin:/p/IRIX6/spectro/v5_2_1/bin:/p/IRIX6/dp/v7_5/bin:/p/IRIX6/fpgplot/v1_7a/bin:/p/IRIX6/pgplot/v5_1_1a/dst:/p/IRIX6/sdsstools/v4_7/bin:/p/IRIX6/ftcl/v3_3b/bin:/p/IRIX6/dervish/v7_14/bin:/p/IRIX6/sdssmath/v4_20/bin:/p/IRIX6/astrotools/v5_0/bin:/p/IRIX6/plate/v3_4/bin --------------------------------------------------------------- Fri Jan 19 11:35:48 CST 2001 ASTROM_DIR=/p/IRIX6/astrom/v3_3 ASTROTOOLS_DIR=/p/IRIX6/astrotools/v5_0 CVS_DIR=/p/IRIX6/cvs/v1_10 DERVISH_DIR=/p/IRIX6/dervish/v7_14 DIFFUTILS_DIR=/p/IRIX6/diffutils/v2_7 DIFF_DIR=/p/IRIX/diff/v2_7 DP_DIR=/p/IRIX6/dp/v7_5 EMACS_DIR=/p/IRIX/emacs/v19_30a FFTW_DIR=/p/IRIX6/fftw/v1_2a FPGPLOT_DIR=/p/IRIX6/fpgplot/v1_7a FSAO_DIR=/p/IRIX6/fsao/v3_14a FSLALIB_DIR=/p/IRIX6/fslalib/v2_1_2aa FTCL_DIR=/p/IRIX6/ftcl/v3_3b IDLSPEC2D_DIR=/p/IRIX6/idlspec2d/v1_0 IDLUTILS_DIR=/p/IRIX6/idlutils/v1_0 INT_DIR=/p/IRIX6/dervish/v7_14/doc/int LAPACK_DIR=/p/IRIX6/lapack/v2_0a LIBFITS_DIR=/p/IRIX6/libfits/v2_1 LSF_DIR=/p/IRIX6/lsf/v3_2_2/SGI/ MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/IRIX6/mt/v7_2 PGPLOT_DIR=/p/IRIX6/pgplot/v5_1_1a PHOTO_DIR=/p/IRIX6/photo/v5_2_13 PLATE_DIR=/p/IRIX6/plate/v3_4 RCS_DIR=/p/IRIX/rcs/v5_7 SDSSCVS_DIR=/p/IRIX/sdsscvs/v1_4 SDSSMATH_DIR=/p/IRIX6/sdssmath/v4_20 SDSSTOOLS_DIR=/p/IRIX6/sdsstools/v4_7 SETUPS_DIR=/usr/local/etc SLALIB_DIR=/p/IRIX6/slalib/v2_1_2aa SLATEC_DIR=/p/IRIX6/slatec/v0_9a SPECTRO_DIR=/p/IRIX6/spectro/v5_2_1 SSC_DIR=/p/IRIX6/ssc/v4_6 TCLX_DIR=/p/IRIX6/tclx/v7_4adfa TCL_DIR=/p/IRIX6/tcl/v7_4df TK_DIR=/p/IRIX6/tk/v4_0dn UPS_DIR=/p/IRIX6/ups/v4_4a --------------------------------------------------------------- Fri Jan 19 11:35:48 CST 2001 Begin running plate --------------------------------------------------------------- Fri Jan 19 11:35:48 CST 2001 Begin running makePlates -verbose=2 Executing commands in /p/IRIX6/dervish/v7_14/etc/dervishStartup.tcl: Executing commands in /p/IRIX6/dp/v7_5/etc/dpStartup.tcl: loading DP scripts from /p/IRIX6/dp/v7_5 Executing commands in /p/IRIX6/astrotools/v5_0/etc/astrotoolsStartup.tcl Executing commands in /p/IRIX6/plate/v3_4/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x10b9bf48 makePlates : beginning loop over plObs chain; makePlates : making 41 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0291.par makePlates : plateInfo struct for plate 500 : (h2).mjd 51977 (h2).raCen 149.2254 (h2).decCen 1.888114 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.225 1.888 149.225 3.388 plMakePlateFromTile : mjd of obs : 51977.575262 Observed HA/dec of plate center, fiducial point (deg) : -29.002 1.893 -29.003 3.393 The rotation angle of the fid. point is 38.272213 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0292.par makePlates : plateInfo struct for plate 501 : (h2).mjd 51977 (h2).raCen 150.9479 (h2).decCen 1.900156 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.948 1.900 150.948 3.400 plMakePlateFromTile : mjd of obs : 51977.577263 Observed HA/dec of plate center, fiducial point (deg) : -30.002 1.905 -30.003 3.405 The rotation angle of the fid. point is 39.130354 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0293.par makePlates : plateInfo struct for plate 502 : (h2).mjd 51977 (h2).raCen 152.8089 (h2).decCen 1.946754 (h2).haCen -17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.809 1.947 152.809 3.447 plMakePlateFromTile : mjd of obs : 51977.618443 Observed HA/dec of plate center, fiducial point (deg) : -17.002 1.951 -17.003 3.450 The rotation angle of the fid. point is 25.578593 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-QA =(-300.34, -1.78) and QUALITY=(-300.00, 0.00) addQualit : not adding OBJECT-QA at (-300.34, -1.78) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0502.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0502.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0294.par makePlates : plateInfo struct for plate 503 : (h2).mjd 51977 (h2).raCen 154.8717 (h2).decCen 2.092348 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.872 2.092 154.872 3.592 plMakePlateFromTile : mjd of obs : 51977.618615 Observed HA/dec of plate center, fiducial point (deg) : -19.002 2.096 -19.003 3.596 The rotation angle of the fid. point is 28.139121 plMakePlateFromTile : beginning loop over 1381 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0295.par makePlates : plateInfo struct for plate 504 : (h2).mjd 51977 (h2).raCen 156.8795 (h2).decCen 2.089468 (h2).haCen -21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 156.880 2.089 156.880 3.589 plMakePlateFromTile : mjd of obs : 51977.618635 Observed HA/dec of plate center, fiducial point (deg) : -21.002 2.093 -21.003 3.593 The rotation angle of the fid. point is 30.465543 plMakePlateFromTile : beginning loop over 1391 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-ROSAT_D =(296.79, -0.07) and QUALITY=(300.00, 0.00) addQualit : not adding OBJECT-ROSAT_D at (296.79, -0.07) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0504.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0504.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0296.par makePlates : plateInfo struct for plate 505 : (h2).mjd 51977 (h2).raCen 158.8291 (h2).decCen 2.159993 (h2).haCen -23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 158.829 2.160 158.829 3.660 plMakePlateFromTile : mjd of obs : 51977.618494 Observed HA/dec of plate center, fiducial point (deg) : -23.002 2.164 -23.003 3.663 The rotation angle of the fid. point is 32.703437 plMakePlateFromTile : beginning loop over 1339 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-GALAXY =(146.98, 258.56) and QUALITY=(150.00, 259.81) addQualit : not adding OBJECT-GALAXY at (146.98, 258.56) addQualit : collision between OBJECT-GALAXY =(-147.67, 257.72) and QUALITY=(-150.00, 259.81) addQualit : not adding OBJECT-GALAXY at (-147.67, 257.72) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0505.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0505.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0297.par makePlates : plateInfo struct for plate 506 : (h2).mjd 51977 (h2).raCen 160.7715 (h2).decCen 2.196035 (h2).haCen -10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 160.772 2.196 160.772 3.696 plMakePlateFromTile : mjd of obs : 51977.659898 Observed HA/dec of plate center, fiducial point (deg) : -10.002 2.199 -10.002 3.699 The rotation angle of the fid. point is 16.004028 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-GALAXY =(149.47, 261.14) and QUALITY=(150.00, 259.81) addQualit : not adding OBJECT-GALAXY at (149.47, 261.14) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0506.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0506.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0298.par makePlates : plateInfo struct for plate 507 : (h2).mjd 51977 (h2).raCen 162.914 (h2).decCen 2.189537 (h2).haCen -12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.914 2.190 162.914 3.690 plMakePlateFromTile : mjd of obs : 51977.660291 Observed HA/dec of plate center, fiducial point (deg) : -12.002 2.193 -12.002 3.692 The rotation angle of the fid. point is 18.941521 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0299.par makePlates : plateInfo struct for plate 508 : (h2).mjd 51977 (h2).raCen 165.2099 (h2).decCen 2.433302 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.210 2.433 165.210 3.933 plMakePlateFromTile : mjd of obs : 51977.658338 Observed HA/dec of plate center, fiducial point (deg) : -15.002 2.437 -15.002 3.936 The rotation angle of the fid. point is 23.260516 plMakePlateFromTile : beginning loop over 1328 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0300.par makePlates : plateInfo struct for plate 509 : (h2).mjd 51977 (h2).raCen 166.9379 (h2).decCen 2.19771 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.938 2.198 166.938 3.698 plMakePlateFromTile : mjd of obs : 51977.660354 Observed HA/dec of plate center, fiducial point (deg) : -16.002 2.201 -16.002 3.701 The rotation angle of the fid. point is 24.445007 plMakePlateFromTile : beginning loop over 1378 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0301.par makePlates : plateInfo struct for plate 510 : (h2).mjd 51977 (h2).raCen 168.6281 (h2).decCen 2.35327 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.628 2.353 168.628 3.853 plMakePlateFromTile : mjd of obs : 51977.659494 Observed HA/dec of plate center, fiducial point (deg) : -18.002 2.357 -18.002 3.856 The rotation angle of the fid. point is 27.090180 plMakePlateFromTile : beginning loop over 1328 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0302.par makePlates : plateInfo struct for plate 511 : (h2).mjd 51977 (h2).raCen 170.497 (h2).decCen 2.278235 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.497 2.278 170.497 3.778 plMakePlateFromTile : mjd of obs : 51977.659129 Observed HA/dec of plate center, fiducial point (deg) : -20.002 2.282 -20.002 3.781 The rotation angle of the fid. point is 29.445465 plMakePlateFromTile : beginning loop over 1349 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0303.par makePlates : plateInfo struct for plate 512 : (h2).mjd 51977 (h2).raCen 172.4187 (h2).decCen 2.345283 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.419 2.345 172.419 3.845 plMakePlateFromTile : mjd of obs : 51977.658911 Observed HA/dec of plate center, fiducial point (deg) : -22.002 2.349 -22.002 3.848 The rotation angle of the fid. point is 31.754507 plMakePlateFromTile : beginning loop over 1358 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0304.par makePlates : plateInfo struct for plate 513 : (h2).mjd 51977 (h2).raCen 174.2352 (h2).decCen 2.315356 (h2).haCen -9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.235 2.315 174.235 3.815 plMakePlateFromTile : mjd of obs : 51977.699966 Observed HA/dec of plate center, fiducial point (deg) : -9.002 2.318 -9.002 3.818 The rotation angle of the fid. point is 14.537957 plMakePlateFromTile : beginning loop over 1383 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-GALAXY =(-150.23, 260.94) and QUALITY=(-150.00, 259.81) addQualit : not adding OBJECT-GALAXY at (-150.23, 260.94) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0513.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0513.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0305.par makePlates : plateInfo struct for plate 514 : (h2).mjd 51977 (h2).raCen 176.3343 (h2).decCen 2.448638 (h2).haCen -11 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.334 2.449 176.334 3.949 plMakePlateFromTile : mjd of obs : 51977.700239 Observed HA/dec of plate center, fiducial point (deg) : -11.002 2.452 -11.002 3.951 The rotation angle of the fid. point is 17.609031 plMakePlateFromTile : beginning loop over 1366 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-GALAXY =(-150.14, -260.84) and QUALITY=(-150.00, -259.81) addQualit : not adding OBJECT-GALAXY at (-150.14, -260.84) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0514.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0514.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0306.par makePlates : plateInfo struct for plate 515 : (h2).mjd 51977 (h2).raCen 178.4755 (h2).decCen 2.401689 (h2).haCen -13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.476 2.402 178.476 3.902 plMakePlateFromTile : mjd of obs : 51977.700628 Observed HA/dec of plate center, fiducial point (deg) : -13.002 2.405 -13.002 3.904 The rotation angle of the fid. point is 20.479050 plMakePlateFromTile : beginning loop over 1392 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0307.par makePlates : plateInfo struct for plate 516 : (h2).mjd 51977 (h2).raCen 180.4229 (h2).decCen 2.429961 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 180.423 2.430 180.423 3.930 plMakePlateFromTile : mjd of obs : 51977.700481 Observed HA/dec of plate center, fiducial point (deg) : -15.002 2.433 -15.002 3.933 The rotation angle of the fid. point is 23.257157 plMakePlateFromTile : beginning loop over 1374 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0308.par makePlates : plateInfo struct for plate 517 : (h2).mjd 51977 (h2).raCen 182.1703 (h2).decCen 2.449349 (h2).haCen -17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 182.170 2.449 182.170 3.949 plMakePlateFromTile : mjd of obs : 51977.699779 Observed HA/dec of plate center, fiducial point (deg) : -17.002 2.453 -17.002 3.952 The rotation angle of the fid. point is 25.893280 plMakePlateFromTile : beginning loop over 1372 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0309.par makePlates : plateInfo struct for plate 518 : (h2).mjd 51977 (h2).raCen 184.1558 (h2).decCen 2.439239 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 184.156 2.439 184.156 3.939 plMakePlateFromTile : mjd of obs : 51977.699737 Observed HA/dec of plate center, fiducial point (deg) : -19.002 2.443 -19.002 3.942 The rotation angle of the fid. point is 28.367845 plMakePlateFromTile : beginning loop over 1386 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0310.par makePlates : plateInfo struct for plate 519 : (h2).mjd 51977 (h2).raCen 186.1819 (h2).decCen 2.509443 (h2).haCen -21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.182 2.509 186.182 4.009 plMakePlateFromTile : mjd of obs : 51977.699808 Observed HA/dec of plate center, fiducial point (deg) : -21.002 2.513 -21.002 4.012 The rotation angle of the fid. point is 30.753862 plMakePlateFromTile : beginning loop over 1383 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0311.par makePlates : plateInfo struct for plate 520 : (h2).mjd 51977 (h2).raCen 188.1385 (h2).decCen 2.442763 (h2).haCen -23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 188.138 2.443 188.138 3.943 plMakePlateFromTile : mjd of obs : 51977.699685 Observed HA/dec of plate center, fiducial point (deg) : -23.002 2.447 -23.002 3.946 The rotation angle of the fid. point is 32.901454 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0312.par makePlates : plateInfo struct for plate 521 : (h2).mjd 51977 (h2).raCen 190.1165 (h2).decCen 2.519038 (h2).haCen -25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 190.117 2.519 190.117 4.019 plMakePlateFromTile : mjd of obs : 51977.699622 Observed HA/dec of plate center, fiducial point (deg) : -25.002 2.523 -25.002 4.022 The rotation angle of the fid. point is 35.011340 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0313.par makePlates : plateInfo struct for plate 522 : (h2).mjd 51977 (h2).raCen 191.9242 (h2).decCen 2.323242 (h2).haCen -11 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.924 2.323 191.924 3.823 plMakePlateFromTile : mjd of obs : 51977.743425 Observed HA/dec of plate center, fiducial point (deg) : -11.002 2.326 -11.002 3.826 The rotation angle of the fid. point is 17.547428 plMakePlateFromTile : beginning loop over 1422 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0314.par makePlates : plateInfo struct for plate 523 : (h2).mjd 51977 (h2).raCen 194.0215 (h2).decCen 2.410512 (h2).haCen -14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 194.022 2.411 194.022 3.911 plMakePlateFromTile : mjd of obs : 51977.740921 Observed HA/dec of plate center, fiducial point (deg) : -14.002 2.414 -14.002 3.913 The rotation angle of the fid. point is 21.880550 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0315.par makePlates : plateInfo struct for plate 524 : (h2).mjd 51977 (h2).raCen 196.1123 (h2).decCen 2.395804 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 196.112 2.396 196.112 3.896 plMakePlateFromTile : mjd of obs : 51977.741171 Observed HA/dec of plate center, fiducial point (deg) : -16.002 2.399 -16.002 3.899 The rotation angle of the fid. point is 24.564455 plMakePlateFromTile : beginning loop over 1376 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0316.par makePlates : plateInfo struct for plate 525 : (h2).mjd 51977 (h2).raCen 198.0932 (h2).decCen 2.273097 (h2).haCen -18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.093 2.273 198.093 3.773 plMakePlateFromTile : mjd of obs : 51977.741116 Observed HA/dec of plate center, fiducial point (deg) : -18.002 2.277 -18.002 3.776 The rotation angle of the fid. point is 27.035458 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0317.par makePlates : plateInfo struct for plate 526 : (h2).mjd 51977 (h2).raCen 200.0939 (h2).decCen 2.301055 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.094 2.301 200.094 3.801 plMakePlateFromTile : mjd of obs : 51977.741116 Observed HA/dec of plate center, fiducial point (deg) : -20.002 2.305 -20.002 3.804 The rotation angle of the fid. point is 29.458730 plMakePlateFromTile : beginning loop over 1362 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0318.par makePlates : plateInfo struct for plate 527 : (h2).mjd 51977 (h2).raCen 201.9577 (h2).decCen 2.249914 (h2).haCen -21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 201.958 2.250 201.958 3.750 plMakePlateFromTile : mjd of obs : 51977.743508 Observed HA/dec of plate center, fiducial point (deg) : -21.002 2.254 -21.002 3.753 The rotation angle of the fid. point is 30.572261 plMakePlateFromTile : beginning loop over 1379 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0319.par makePlates : plateInfo struct for plate 528 : (h2).mjd 51977 (h2).raCen 203.9791 (h2).decCen 2.286732 (h2).haCen -8 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.979 2.287 203.979 3.787 plMakePlateFromTile : mjd of obs : 51977.785131 Observed HA/dec of plate center, fiducial point (deg) : -8.002 2.290 -8.002 3.790 The rotation angle of the fid. point is 12.981157 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0320.par makePlates : plateInfo struct for plate 529 : (h2).mjd 51977 (h2).raCen 205.8154 (h2).decCen 2.241922 (h2).haCen 4 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 205.815 2.242 205.815 3.742 plMakePlateFromTile : mjd of obs : 51977.823469 Observed HA/dec of plate center, fiducial point (deg) : 3.998 2.245 3.998 3.745 The rotation angle of the fid. point is -6.582744 plMakePlateFromTile : beginning loop over 1395 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0321.par makePlates : plateInfo struct for plate 530 : (h2).mjd 51977 (h2).raCen 207.773 (h2).decCen 2.301151 (h2).haCen 2 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 207.773 2.301 207.773 3.801 plMakePlateFromTile : mjd of obs : 51977.823350 Observed HA/dec of plate center, fiducial point (deg) : 1.998 2.305 1.998 3.804 The rotation angle of the fid. point is -3.309688 plMakePlateFromTile : beginning loop over 1373 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0322.par makePlates : plateInfo struct for plate 531 : (h2).mjd 51977 (h2).raCen 209.8731 (h2).decCen 2.096705 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 209.873 2.097 209.873 3.597 plMakePlateFromTile : mjd of obs : 51977.823625 Observed HA/dec of plate center, fiducial point (deg) : -0.002 2.100 -0.002 3.600 The rotation angle of the fid. point is 0.001459 plMakePlateFromTile : beginning loop over 1404 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-GALAXY =(297.95, -1.91) and QUALITY=(300.00, 0.00) addQualit : not adding OBJECT-GALAXY at (297.95, -1.91) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0531.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0531.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0323.par makePlates : plateInfo struct for plate 532 : (h2).mjd 51977 (h2).raCen 211.7432 (h2).decCen 2.112843 (h2).haCen -1 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 211.743 2.113 211.743 3.613 plMakePlateFromTile : mjd of obs : 51977.826034 Observed HA/dec of plate center, fiducial point (deg) : -1.002 2.117 -1.002 3.616 The rotation angle of the fid. point is 1.649497 plMakePlateFromTile : beginning loop over 1384 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0324.par makePlates : plateInfo struct for plate 533 : (h2).mjd 51977 (h2).raCen 213.7463 (h2).decCen 2.150797 (h2).haCen 11 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 213.746 2.151 213.746 3.651 plMakePlateFromTile : mjd of obs : 51977.864835 Observed HA/dec of plate center, fiducial point (deg) : 10.998 2.155 10.998 3.654 The rotation angle of the fid. point is -17.462413 plMakePlateFromTile : beginning loop over 1369 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0325.par makePlates : plateInfo struct for plate 534 : (h2).mjd 51977 (h2).raCen 215.7421 (h2).decCen 1.980978 (h2).haCen 9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 215.742 1.981 215.742 3.481 plMakePlateFromTile : mjd of obs : 51977.864821 Observed HA/dec of plate center, fiducial point (deg) : 8.998 1.985 8.998 3.484 The rotation angle of the fid. point is -14.398780 plMakePlateFromTile : beginning loop over 1387 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0326.par makePlates : plateInfo struct for plate 535 : (h2).mjd 51977 (h2).raCen 217.6889 (h2).decCen 1.962095 (h2).haCen 7 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 217.689 1.962 217.689 3.462 plMakePlateFromTile : mjd of obs : 51977.864672 Observed HA/dec of plate center, fiducial point (deg) : 6.998 1.966 6.998 3.466 The rotation angle of the fid. point is -11.307166 plMakePlateFromTile : beginning loop over 1382 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-GALAXY =(148.76, -257.28) and QUALITY=(150.00, -259.81) addQualit : not adding OBJECT-GALAXY at (148.76, -257.28) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0535.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0535.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0327.par makePlates : plateInfo struct for plate 536 : (h2).mjd 51977 (h2).raCen 219.6766 (h2).decCen 1.871281 (h2).haCen 5 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 219.677 1.871 219.677 3.371 plMakePlateFromTile : mjd of obs : 51977.864636 Observed HA/dec of plate center, fiducial point (deg) : 4.998 1.876 4.998 3.375 The rotation angle of the fid. point is -8.118208 plMakePlateFromTile : beginning loop over 1397 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0328.par makePlates : plateInfo struct for plate 537 : (h2).mjd 51977 (h2).raCen 221.6386 (h2).decCen 1.818738 (h2).haCen 3 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 221.639 1.819 221.639 3.319 plMakePlateFromTile : mjd of obs : 51977.864529 Observed HA/dec of plate center, fiducial point (deg) : 2.998 1.823 2.998 3.322 The rotation angle of the fid. point is -4.888843 plMakePlateFromTile : beginning loop over 1357 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0329.par makePlates : plateInfo struct for plate 538 : (h2).mjd 51977 (h2).raCen 223.6007 (h2).decCen 1.75875 (h2).haCen 1 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 223.601 1.759 223.601 3.259 plMakePlateFromTile : mjd of obs : 51977.864422 Observed HA/dec of plate center, fiducial point (deg) : 0.998 1.763 0.998 3.263 The rotation angle of the fid. point is -1.630785 plMakePlateFromTile : beginning loop over 1369 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program addQualit : collision between OBJECT-GALAXY =(-297.81, -0.15) and QUALITY=(-300.00, 0.00) addQualit : not adding OBJECT-GALAXY at (-297.81, -0.15) makePlates : plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0538.par has holes that collided with quality holes written to /opdb/d1/data/drillRuns/dr2001.1/qualityCollision-0538.par makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0330.par makePlates : plateInfo struct for plate 539 : (h2).mjd 51977 (h2).raCen 225.5631 (h2).decCen 1.714675 (h2).haCen 0 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 225.563 1.715 225.563 3.215 plMakePlateFromTile : mjd of obs : 51977.867086 Observed HA/dec of plate center, fiducial point (deg) : -0.002 1.719 -0.002 3.219 The rotation angle of the fid. point is 0.000355 plMakePlateFromTile : beginning loop over 1410 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk14/complete//plPlugMapT-0331.par makePlates : plateInfo struct for plate 540 : (h2).mjd 51977 (h2).raCen 227.5253 (h2).decCen 1.661697 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.4 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 227.525 1.662 227.525 3.162 plMakePlateFromTile : mjd of obs : 51977.905774 Observed HA/dec of plate center, fiducial point (deg) : 11.998 1.667 11.998 3.166 The rotation angle of the fid. point is -18.674393 plMakePlateFromTile : beginning loop over 1276 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Jan 19 11:41:03 CST 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/IRIX6/dervish/v7_14/etc/dervishStartup.tcl: Executing commands in /p/IRIX6/dp/v7_5/etc/dpStartup.tcl: loading DP scripts from /p/IRIX6/dp/v7_5 Executing commands in /p/IRIX6/astrotools/v5_0/etc/astrotoolsStartup.tcl Executing commands in /p/IRIX6/plate/v3_4/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 41 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0500.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 102 2 37 93 3 32 101 4 49 106 5 37 134 6 20 64 7 11 56 8 17 87 9 23 97 10 55 144 11 34 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 756 1 5 228 29 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 166 16 plFiberPlate : adding spectro-photo std with objId = 1907 0 1 181 5 plFiberPlate : adding spectro-photo std with objId = 1907 0 2 181 54 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 157 2 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 161 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 165 47 plFiberPlate : adding spectro-photo std with objId = 1907 0 4 184 42 plFiberPlate : 127 possible sky positions to use as objects from a possible 539. plFiberPlate : 68 possible sky positions to use as objects from a possible 538. plFiberPlate : 38 possible sky positions to use as objects from a possible 537. plFiberPlate : 29 possible sky positions to use as objects from a possible 536. plFiberPlate : 9 possible sky positions to use as objects from a possible 535. plFiberPlate : 27 possible sky positions to use as objects from a possible 534. plFiberPlate : 22 possible sky positions to use as objects from a possible 533. plFiberPlate : 59 possible sky positions to use as objects from a possible 532. plFiberPlate : 35 possible sky positions to use as objects from a possible 531. plFiberPlate : 24 possible sky positions to use as objects from a possible 530. plFiberPlate : 16 possible sky positions to use as objects from a possible 529. plFiberPlate : 15 possible sky positions to use as objects from a possible 528. plFiberPlate : 12 possible sky positions to use as objects from a possible 527. plFiberPlate : 10 possible sky positions to use as objects from a possible 526. plFiberPlate : 4 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 87 possible sky positions to use as objects from a possible 523. plFiberPlate : 45 possible sky positions to use as objects from a possible 522. plFiberPlate : 20 possible sky positions to use as objects from a possible 521. plFiberPlate : 14 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 16 possible sky positions to use as objects from a possible 518. plFiberPlate : 8 possible sky positions to use as objects from a possible 517. plFiberPlate : 6 possible sky positions to use as objects from a possible 516. plFiberPlate : 7 possible sky positions to use as objects from a possible 515. plFiberPlate : 32 possible sky positions to use as objects from a possible 514. plFiberPlate : 2 possible sky positions to use as objects from a possible 513. plFiberPlate : 1 possible sky positions to use as objects from a possible 512. plFiberPlate : 9 possible sky positions to use as objects from a possible 511. plFiberPlate : 6 possible sky positions to use as objects from a possible 510. plFiberPlate : 3 possible sky positions to use as objects from a possible 509. plFiberPlate : 11 possible sky positions to use as objects from a possible 508. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0500.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0500.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0501.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 131 2 32 84 3 31 91 4 41 111 5 27 117 6 13 57 7 7 72 8 15 113 9 9 92 10 49 139 11 32 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 173 39 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 177 22 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 169 25 plFiberPlate : adding spectro-photo std with objId = 1907 0 3 190 15 plFiberPlate : adding spectro-photo std with objId = 1907 0 2 181 54 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 165 47 plFiberPlate : adding spectro-photo std with objId = 1907 0 4 184 42 plFiberPlate : adding spectro-photo std with objId = 1907 0 1 186 50 plFiberPlate : 95 possible sky positions to use as objects from a possible 560. plFiberPlate : 119 possible sky positions to use as objects from a possible 559. plFiberPlate : 45 possible sky positions to use as objects from a possible 558. plFiberPlate : 22 possible sky positions to use as objects from a possible 557. plFiberPlate : 44 possible sky positions to use as objects from a possible 556. plFiberPlate : 34 possible sky positions to use as objects from a possible 555. plFiberPlate : 39 possible sky positions to use as objects from a possible 554. plFiberPlate : 86 possible sky positions to use as objects from a possible 553. plFiberPlate : 52 possible sky positions to use as objects from a possible 552. plFiberPlate : 27 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 6 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 24 possible sky positions to use as objects from a possible 547. plFiberPlate : 28 possible sky positions to use as objects from a possible 546. plFiberPlate : 17 possible sky positions to use as objects from a possible 545. plFiberPlate : 55 possible sky positions to use as objects from a possible 544. plFiberPlate : 32 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 7 possible sky positions to use as objects from a possible 541. plFiberPlate : 8 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : 6 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 17 possible sky positions to use as objects from a possible 536. plFiberPlate : 27 possible sky positions to use as objects from a possible 535. plFiberPlate : 20 possible sky positions to use as objects from a possible 534. plFiberPlate : 7 possible sky positions to use as objects from a possible 533. plFiberPlate : 2 possible sky positions to use as objects from a possible 532. plFiberPlate : 3 possible sky positions to use as objects from a possible 531. plFiberPlate : 7 possible sky positions to use as objects from a possible 530. plFiberPlate : 31 possible sky positions to use as objects from a possible 529. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0500.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0501.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0501.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0502.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 295 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 125 2 17 105 3 25 89 4 21 118 5 20 116 6 17 68 7 13 68 8 21 95 9 19 104 10 26 145 11 21 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 15 87 plFiberPlate : adding spectro-photo std with objId = 1992 0 4 13 31 plFiberPlate : adding spectro-photo std with objId = 1992 0 4 24 35 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 188 12 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 189 13 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 189 45 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 16 29 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 180 36 plFiberPlate : 130 possible sky positions to use as objects from a possible 574. plFiberPlate : 61 possible sky positions to use as objects from a possible 573. plFiberPlate : 38 possible sky positions to use as objects from a possible 572. plFiberPlate : 29 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 44 possible sky positions to use as objects from a possible 569. plFiberPlate : 51 possible sky positions to use as objects from a possible 568. plFiberPlate : 87 possible sky positions to use as objects from a possible 567. plFiberPlate : 60 possible sky positions to use as objects from a possible 566. plFiberPlate : 31 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 11 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : 27 possible sky positions to use as objects from a possible 559. plFiberPlate : 68 possible sky positions to use as objects from a possible 558. plFiberPlate : 40 possible sky positions to use as objects from a possible 557. plFiberPlate : 20 possible sky positions to use as objects from a possible 556. plFiberPlate : 15 possible sky positions to use as objects from a possible 555. plFiberPlate : 16 possible sky positions to use as objects from a possible 554. plFiberPlate : 11 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 22 possible sky positions to use as objects from a possible 551. plFiberPlate : 14 possible sky positions to use as objects from a possible 550. plFiberPlate : 46 possible sky positions to use as objects from a possible 549. plFiberPlate : 19 possible sky positions to use as objects from a possible 548. plFiberPlate : 12 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 8 possible sky positions to use as objects from a possible 545. plFiberPlate : 1 possible sky positions to use as objects from a possible 544. plFiberPlate : 19 possible sky positions to use as objects from a possible 543. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0501.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0502.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0502.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0503.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 125 2 17 107 3 23 97 4 27 114 5 20 131 6 14 68 7 12 70 8 27 103 9 19 95 10 29 147 11 26 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 30 98 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 197 35 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 203 14 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 26 9 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 195 38 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 204 52 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 204 48 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 189 45 plFiberPlate : 112 possible sky positions to use as objects from a possible 578. plFiberPlate : 40 possible sky positions to use as objects from a possible 577. plFiberPlate : 21 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 26 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 39 possible sky positions to use as objects from a possible 572. plFiberPlate : 53 possible sky positions to use as objects from a possible 571. plFiberPlate : 28 possible sky positions to use as objects from a possible 570. plFiberPlate : 14 possible sky positions to use as objects from a possible 569. plFiberPlate : 3 possible sky positions to use as objects from a possible 568. plFiberPlate : 9 possible sky positions to use as objects from a possible 567. plFiberPlate : 6 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 18 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 82 possible sky positions to use as objects from a possible 562. plFiberPlate : 36 possible sky positions to use as objects from a possible 561. plFiberPlate : 16 possible sky positions to use as objects from a possible 560. plFiberPlate : 5 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 9 possible sky positions to use as objects from a possible 557. plFiberPlate : 4 possible sky positions to use as objects from a possible 556. plFiberPlate : 7 possible sky positions to use as objects from a possible 555. plFiberPlate : 19 possible sky positions to use as objects from a possible 554. plFiberPlate : 38 possible sky positions to use as objects from a possible 553. plFiberPlate : 20 possible sky positions to use as objects from a possible 552. plFiberPlate : 14 possible sky positions to use as objects from a possible 551. plFiberPlate : 2 possible sky positions to use as objects from a possible 550. plFiberPlate : 6 possible sky positions to use as objects from a possible 549. plFiberPlate : 10 possible sky positions to use as objects from a possible 548. plFiberPlate : 30 possible sky positions to use as objects from a possible 547. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0502.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0503.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0503.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0504.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 127 2 26 112 3 19 95 4 27 100 5 30 121 6 18 66 7 18 61 8 21 101 9 23 95 10 29 151 11 31 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 216 44 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 205 34 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 51 22 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 49 47 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 202 10 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 204 48 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 51 2 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 208 8 plFiberPlate : 88 possible sky positions to use as objects from a possible 567. plFiberPlate : 51 possible sky positions to use as objects from a possible 566. plFiberPlate : 39 possible sky positions to use as objects from a possible 565. plFiberPlate : 35 possible sky positions to use as objects from a possible 564. plFiberPlate : 56 possible sky positions to use as objects from a possible 563. plFiberPlate : 33 possible sky positions to use as objects from a possible 562. plFiberPlate : 54 possible sky positions to use as objects from a possible 561. plFiberPlate : 46 possible sky positions to use as objects from a possible 560. plFiberPlate : 28 possible sky positions to use as objects from a possible 559. plFiberPlate : 16 possible sky positions to use as objects from a possible 558. plFiberPlate : 10 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 10 possible sky positions to use as objects from a possible 555. plFiberPlate : 19 possible sky positions to use as objects from a possible 554. plFiberPlate : 18 possible sky positions to use as objects from a possible 553. plFiberPlate : 19 possible sky positions to use as objects from a possible 552. plFiberPlate : 52 possible sky positions to use as objects from a possible 551. plFiberPlate : 71 possible sky positions to use as objects from a possible 550. plFiberPlate : 29 possible sky positions to use as objects from a possible 549. plFiberPlate : 9 possible sky positions to use as objects from a possible 548. plFiberPlate : 10 possible sky positions to use as objects from a possible 547. plFiberPlate : 7 possible sky positions to use as objects from a possible 546. plFiberPlate : 18 possible sky positions to use as objects from a possible 545. plFiberPlate : 35 possible sky positions to use as objects from a possible 544. plFiberPlate : 6 possible sky positions to use as objects from a possible 543. plFiberPlate : 36 possible sky positions to use as objects from a possible 542. plFiberPlate : 22 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 8 possible sky positions to use as objects from a possible 539. plFiberPlate : 2 possible sky positions to use as objects from a possible 538. plFiberPlate : 11 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0503.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0504.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0504.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0505.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 301 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 114 2 18 109 3 28 98 4 32 101 5 21 127 6 11 65 7 10 65 8 14 94 9 8 101 10 36 148 11 17 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 231 42 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 69 25 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 230 75 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 230 13 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 51 22 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 64 38 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 224 31 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 220 40 plFiberPlate : 103 possible sky positions to use as objects from a possible 563. plFiberPlate : 50 possible sky positions to use as objects from a possible 562. plFiberPlate : 23 possible sky positions to use as objects from a possible 561. plFiberPlate : 26 possible sky positions to use as objects from a possible 560. plFiberPlate : 23 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 37 possible sky positions to use as objects from a possible 557. plFiberPlate : 57 possible sky positions to use as objects from a possible 556. plFiberPlate : 31 possible sky positions to use as objects from a possible 555. plFiberPlate : 14 possible sky positions to use as objects from a possible 554. plFiberPlate : 14 possible sky positions to use as objects from a possible 553. plFiberPlate : 9 possible sky positions to use as objects from a possible 552. plFiberPlate : 10 possible sky positions to use as objects from a possible 551. plFiberPlate : 7 possible sky positions to use as objects from a possible 550. plFiberPlate : 12 possible sky positions to use as objects from a possible 549. plFiberPlate : 11 possible sky positions to use as objects from a possible 548. plFiberPlate : 81 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 16 possible sky positions to use as objects from a possible 545. plFiberPlate : 8 possible sky positions to use as objects from a possible 544. plFiberPlate : 11 possible sky positions to use as objects from a possible 543. plFiberPlate : 10 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 6 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : 42 possible sky positions to use as objects from a possible 538. plFiberPlate : 18 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 14 possible sky positions to use as objects from a possible 533. plFiberPlate : 12 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0504.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0505.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0505.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0506.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 559 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 115 2 13 101 3 14 104 4 16 119 5 14 123 6 8 76 7 13 65 8 23 121 9 17 94 10 21 148 11 14 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 229 2 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 231 42 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 239 22 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 69 25 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 234 23 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 80 32 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 72 43 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 72 35 plFiberPlate : 124 possible sky positions to use as objects from a possible 589. plFiberPlate : 61 possible sky positions to use as objects from a possible 588. plFiberPlate : 28 possible sky positions to use as objects from a possible 587. plFiberPlate : 26 possible sky positions to use as objects from a possible 586. plFiberPlate : 21 possible sky positions to use as objects from a possible 585. plFiberPlate : 27 possible sky positions to use as objects from a possible 584. plFiberPlate : 44 possible sky positions to use as objects from a possible 583. plFiberPlate : 98 possible sky positions to use as objects from a possible 582. plFiberPlate : 62 possible sky positions to use as objects from a possible 581. plFiberPlate : 32 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 5 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 8 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 38 possible sky positions to use as objects from a possible 574. plFiberPlate : 63 possible sky positions to use as objects from a possible 573. plFiberPlate : 34 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : 3 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : 4 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 30 possible sky positions to use as objects from a possible 565. plFiberPlate : 65 possible sky positions to use as objects from a possible 564. plFiberPlate : 34 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 11 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 11 possible sky positions to use as objects from a possible 559. plFiberPlate : 16 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0505.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0506.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0506.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0507.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 113 2 13 112 3 19 99 4 23 108 5 19 129 6 6 80 7 10 66 8 18 103 9 11 108 10 24 159 11 14 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 250 17 plFiberPlate : adding spectro-photo std with objId = 1992 0 4 89 56 plFiberPlate : adding spectro-photo std with objId = 1992 0 4 85 63 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 256 33 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 252 21 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 92 33 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 80 32 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 252 37 plFiberPlate : 105 possible sky positions to use as objects from a possible 585. plFiberPlate : 75 possible sky positions to use as objects from a possible 584. plFiberPlate : 47 possible sky positions to use as objects from a possible 583. plFiberPlate : 47 possible sky positions to use as objects from a possible 582. plFiberPlate : 33 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 23 possible sky positions to use as objects from a possible 579. plFiberPlate : 59 possible sky positions to use as objects from a possible 578. plFiberPlate : 60 possible sky positions to use as objects from a possible 577. plFiberPlate : 33 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 10 possible sky positions to use as objects from a possible 574. plFiberPlate : 8 possible sky positions to use as objects from a possible 573. plFiberPlate : 12 possible sky positions to use as objects from a possible 572. plFiberPlate : 6 possible sky positions to use as objects from a possible 571. plFiberPlate : 17 possible sky positions to use as objects from a possible 570. plFiberPlate : 85 possible sky positions to use as objects from a possible 569. plFiberPlate : 72 possible sky positions to use as objects from a possible 568. plFiberPlate : 42 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 12 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 23 possible sky positions to use as objects from a possible 563. plFiberPlate : 21 possible sky positions to use as objects from a possible 562. plFiberPlate : 17 possible sky positions to use as objects from a possible 561. plFiberPlate : 44 possible sky positions to use as objects from a possible 560. plFiberPlate : 41 possible sky positions to use as objects from a possible 559. plFiberPlate : 25 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 9 possible sky positions to use as objects from a possible 556. plFiberPlate : 16 possible sky positions to use as objects from a possible 555. plFiberPlate : 13 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0506.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0507.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0507.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0508.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 107 2 30 100 3 23 92 4 21 109 5 22 117 6 10 64 7 8 55 8 13 98 9 15 98 10 26 160 11 18 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 99 40 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 270 25 plFiberPlate : adding spectro-photo std with objId = 1992 0 4 96 51 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 261 98 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 263 86 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 109 39 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 110 33 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 262 41 plFiberPlate : 106 possible sky positions to use as objects from a possible 557. plFiberPlate : 61 possible sky positions to use as objects from a possible 556. plFiberPlate : 51 possible sky positions to use as objects from a possible 555. plFiberPlate : 47 possible sky positions to use as objects from a possible 554. plFiberPlate : 53 possible sky positions to use as objects from a possible 553. plFiberPlate : 15 possible sky positions to use as objects from a possible 552. plFiberPlate : 26 possible sky positions to use as objects from a possible 551. plFiberPlate : 83 possible sky positions to use as objects from a possible 550. plFiberPlate : 45 possible sky positions to use as objects from a possible 549. plFiberPlate : 25 possible sky positions to use as objects from a possible 548. plFiberPlate : 30 possible sky positions to use as objects from a possible 547. plFiberPlate : 25 possible sky positions to use as objects from a possible 546. plFiberPlate : 18 possible sky positions to use as objects from a possible 545. plFiberPlate : 9 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 2 possible sky positions to use as objects from a possible 542. plFiberPlate : 78 possible sky positions to use as objects from a possible 541. plFiberPlate : 40 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 13 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 14 possible sky positions to use as objects from a possible 536. plFiberPlate : 7 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 51 possible sky positions to use as objects from a possible 532. plFiberPlate : 32 possible sky positions to use as objects from a possible 531. plFiberPlate : 13 possible sky positions to use as objects from a possible 530. plFiberPlate : 5 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 5 possible sky positions to use as objects from a possible 527. plFiberPlate : 18 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0507.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0508.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0508.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0509.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 107 2 16 97 3 18 92 4 20 128 5 28 152 6 14 96 7 11 74 8 15 104 9 13 107 10 31 151 11 11 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 109 6 plFiberPlate : adding spectro-photo std with objId = 1992 0 3 118 63 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 285 22 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 282 57 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 110 33 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 109 39 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 286 22 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 275 37 plFiberPlate : 118 possible sky positions to use as objects from a possible 614. plFiberPlate : 42 possible sky positions to use as objects from a possible 613. plFiberPlate : 35 possible sky positions to use as objects from a possible 612. plFiberPlate : 38 possible sky positions to use as objects from a possible 611. plFiberPlate : 10 possible sky positions to use as objects from a possible 610. plFiberPlate : 20 possible sky positions to use as objects from a possible 609. plFiberPlate : 18 possible sky positions to use as objects from a possible 608. plFiberPlate : 99 possible sky positions to use as objects from a possible 607. plFiberPlate : 10 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 4 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 10 possible sky positions to use as objects from a possible 599. plFiberPlate : 89 possible sky positions to use as objects from a possible 598. plFiberPlate : 4 possible sky positions to use as objects from a possible 597. plFiberPlate : 2 possible sky positions to use as objects from a possible 596. plFiberPlate : 4 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 2 possible sky positions to use as objects from a possible 590. plFiberPlate : 43 possible sky positions to use as objects from a possible 589. plFiberPlate : 15 possible sky positions to use as objects from a possible 588. plFiberPlate : 3 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 12 possible sky positions to use as objects from a possible 585. plFiberPlate : 8 possible sky positions to use as objects from a possible 584. plFiberPlate : 12 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0508.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0509.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0509.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0510.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 103 2 34 90 3 17 92 4 7 118 5 16 126 6 6 70 7 4 66 8 9 106 9 14 83 10 37 144 11 29 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 284 9 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 128 60 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 285 22 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 286 22 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 282 57 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 288 70 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 131 28 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 289 12 plFiberPlate : 128 possible sky positions to use as objects from a possible 557. plFiberPlate : 52 possible sky positions to use as objects from a possible 556. plFiberPlate : 17 possible sky positions to use as objects from a possible 555. plFiberPlate : 15 possible sky positions to use as objects from a possible 554. plFiberPlate : 16 possible sky positions to use as objects from a possible 553. plFiberPlate : 23 possible sky positions to use as objects from a possible 552. plFiberPlate : 32 possible sky positions to use as objects from a possible 551. plFiberPlate : 80 possible sky positions to use as objects from a possible 550. plFiberPlate : 61 possible sky positions to use as objects from a possible 549. plFiberPlate : 44 possible sky positions to use as objects from a possible 548. plFiberPlate : 14 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 8 possible sky positions to use as objects from a possible 545. plFiberPlate : 17 possible sky positions to use as objects from a possible 544. plFiberPlate : 16 possible sky positions to use as objects from a possible 543. plFiberPlate : 20 possible sky positions to use as objects from a possible 542. plFiberPlate : 62 possible sky positions to use as objects from a possible 541. plFiberPlate : 17 possible sky positions to use as objects from a possible 540. plFiberPlate : 5 possible sky positions to use as objects from a possible 539. plFiberPlate : 7 possible sky positions to use as objects from a possible 538. plFiberPlate : 2 possible sky positions to use as objects from a possible 537. plFiberPlate : 1 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 17 possible sky positions to use as objects from a possible 534. plFiberPlate : 19 possible sky positions to use as objects from a possible 533. plFiberPlate : 53 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 4 possible sky positions to use as objects from a possible 529. plFiberPlate : 4 possible sky positions to use as objects from a possible 528. plFiberPlate : 5 possible sky positions to use as objects from a possible 527. plFiberPlate : 16 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0509.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0510.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0510.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0511.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 123 2 12 86 3 23 89 4 23 105 5 14 115 6 9 61 7 8 82 8 12 124 9 7 83 10 19 139 11 8 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 307 22 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 138 50 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 140 12 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 305 57 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 131 28 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 303 23 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 299 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 299 37 plFiberPlate : 105 possible sky positions to use as objects from a possible 572. plFiberPlate : 57 possible sky positions to use as objects from a possible 571. plFiberPlate : 29 possible sky positions to use as objects from a possible 570. plFiberPlate : 28 possible sky positions to use as objects from a possible 569. plFiberPlate : 10 possible sky positions to use as objects from a possible 568. plFiberPlate : 14 possible sky positions to use as objects from a possible 567. plFiberPlate : 38 possible sky positions to use as objects from a possible 566. plFiberPlate : 98 possible sky positions to use as objects from a possible 565. plFiberPlate : 70 possible sky positions to use as objects from a possible 564. plFiberPlate : 63 possible sky positions to use as objects from a possible 563. plFiberPlate : 37 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : 7 possible sky positions to use as objects from a possible 560. plFiberPlate : 5 possible sky positions to use as objects from a possible 559. plFiberPlate : 5 possible sky positions to use as objects from a possible 558. plFiberPlate : 77 possible sky positions to use as objects from a possible 557. plFiberPlate : 60 possible sky positions to use as objects from a possible 556. plFiberPlate : 43 possible sky positions to use as objects from a possible 555. plFiberPlate : 13 possible sky positions to use as objects from a possible 554. plFiberPlate : 6 possible sky positions to use as objects from a possible 553. plFiberPlate : 2 possible sky positions to use as objects from a possible 552. plFiberPlate : 1 possible sky positions to use as objects from a possible 551. plFiberPlate : 5 possible sky positions to use as objects from a possible 550. plFiberPlate : 6 possible sky positions to use as objects from a possible 549. plFiberPlate : 52 possible sky positions to use as objects from a possible 548. plFiberPlate : 29 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 9 possible sky positions to use as objects from a possible 545. plFiberPlate : 3 possible sky positions to use as objects from a possible 544. plFiberPlate : 4 possible sky positions to use as objects from a possible 543. plFiberPlate : 12 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0510.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0511.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0511.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0512.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 132 2 19 102 3 15 88 4 16 89 5 9 108 6 10 80 7 17 89 8 19 119 9 18 111 10 22 133 11 17 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 155 48 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 308 8 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 150 2 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 313 12 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 305 57 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 310 71 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 315 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 306 44 plFiberPlate : 76 possible sky positions to use as objects from a possible 581. plFiberPlate : 41 possible sky positions to use as objects from a possible 580. plFiberPlate : 46 possible sky positions to use as objects from a possible 579. plFiberPlate : 26 possible sky positions to use as objects from a possible 578. plFiberPlate : 22 possible sky positions to use as objects from a possible 577. plFiberPlate : 18 possible sky positions to use as objects from a possible 576. plFiberPlate : 48 possible sky positions to use as objects from a possible 575. plFiberPlate : 65 possible sky positions to use as objects from a possible 574. plFiberPlate : 48 possible sky positions to use as objects from a possible 573. plFiberPlate : 37 possible sky positions to use as objects from a possible 572. plFiberPlate : 34 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 6 possible sky positions to use as objects from a possible 569. plFiberPlate : 4 possible sky positions to use as objects from a possible 568. plFiberPlate : 6 possible sky positions to use as objects from a possible 567. plFiberPlate : 34 possible sky positions to use as objects from a possible 566. plFiberPlate : 61 possible sky positions to use as objects from a possible 565. plFiberPlate : 58 possible sky positions to use as objects from a possible 564. plFiberPlate : 50 possible sky positions to use as objects from a possible 563. plFiberPlate : 45 possible sky positions to use as objects from a possible 562. plFiberPlate : 26 possible sky positions to use as objects from a possible 561. plFiberPlate : 25 possible sky positions to use as objects from a possible 560. plFiberPlate : 18 possible sky positions to use as objects from a possible 559. plFiberPlate : 14 possible sky positions to use as objects from a possible 558. plFiberPlate : 53 possible sky positions to use as objects from a possible 557. plFiberPlate : 32 possible sky positions to use as objects from a possible 556. plFiberPlate : 42 possible sky positions to use as objects from a possible 555. plFiberPlate : 32 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 4 possible sky positions to use as objects from a possible 552. plFiberPlate : 26 possible sky positions to use as objects from a possible 551. plFiberPlate : 34 possible sky positions to use as objects from a possible 550. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 689 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0511.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0512.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0512.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0513.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 110 2 25 84 3 23 100 4 16 101 5 16 110 6 15 95 7 11 90 8 17 117 9 15 113 10 31 138 11 23 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 322 59 plFiberPlate : adding spectro-photo std with objId = 1992 0 1 156 7 plFiberPlate : adding spectro-photo std with objId = 1992 0 4 170 24 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 166 16 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 155 48 plFiberPlate : adding spectro-photo std with objId = 1992 0 5 159 28 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 326 30 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 325 56 plFiberPlate : 110 possible sky positions to use as objects from a possible 593. plFiberPlate : 73 possible sky positions to use as objects from a possible 592. plFiberPlate : 79 possible sky positions to use as objects from a possible 591. plFiberPlate : 35 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 20 possible sky positions to use as objects from a possible 588. plFiberPlate : 38 possible sky positions to use as objects from a possible 587. plFiberPlate : 85 possible sky positions to use as objects from a possible 586. plFiberPlate : 68 possible sky positions to use as objects from a possible 585. plFiberPlate : 54 possible sky positions to use as objects from a possible 584. plFiberPlate : 52 possible sky positions to use as objects from a possible 583. plFiberPlate : 39 possible sky positions to use as objects from a possible 582. plFiberPlate : 25 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : 13 possible sky positions to use as objects from a possible 579. plFiberPlate : 60 possible sky positions to use as objects from a possible 578. plFiberPlate : 83 possible sky positions to use as objects from a possible 577. plFiberPlate : 66 possible sky positions to use as objects from a possible 576. plFiberPlate : 51 possible sky positions to use as objects from a possible 575. plFiberPlate : 46 possible sky positions to use as objects from a possible 574. plFiberPlate : 24 possible sky positions to use as objects from a possible 573. plFiberPlate : 11 possible sky positions to use as objects from a possible 572. plFiberPlate : 7 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 72 possible sky positions to use as objects from a possible 569. plFiberPlate : 41 possible sky positions to use as objects from a possible 568. plFiberPlate : 43 possible sky positions to use as objects from a possible 567. plFiberPlate : 28 possible sky positions to use as objects from a possible 566. plFiberPlate : 29 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 9 possible sky positions to use as objects from a possible 563. plFiberPlate : 24 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0512.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0513.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0513.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0514.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 409 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 139 2 24 110 3 20 99 4 23 102 5 11 112 6 6 62 7 5 69 8 14 116 9 13 90 10 32 156 11 24 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 340 16 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 342 11 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 336 50 plFiberPlate : adding spectro-photo std with objId = 1992 0 2 185 29 plFiberPlate : adding spectro-photo std with objId = 1992 0 6 173 37 plFiberPlate : adding spectro-photo std with objId = 1992 0 6 175 16 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 337 45 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 350 12 plFiberPlate : 110 possible sky positions to use as objects from a possible 582. plFiberPlate : 89 possible sky positions to use as objects from a possible 581. plFiberPlate : 49 possible sky positions to use as objects from a possible 580. plFiberPlate : 37 possible sky positions to use as objects from a possible 579. plFiberPlate : 29 possible sky positions to use as objects from a possible 578. plFiberPlate : 40 possible sky positions to use as objects from a possible 577. plFiberPlate : 51 possible sky positions to use as objects from a possible 576. plFiberPlate : 69 possible sky positions to use as objects from a possible 575. plFiberPlate : 47 possible sky positions to use as objects from a possible 574. plFiberPlate : 34 possible sky positions to use as objects from a possible 573. plFiberPlate : 23 possible sky positions to use as objects from a possible 572. plFiberPlate : 13 possible sky positions to use as objects from a possible 571. plFiberPlate : 21 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 20 possible sky positions to use as objects from a possible 568. plFiberPlate : 30 possible sky positions to use as objects from a possible 567. plFiberPlate : 59 possible sky positions to use as objects from a possible 566. plFiberPlate : 55 possible sky positions to use as objects from a possible 565. plFiberPlate : 34 possible sky positions to use as objects from a possible 564. plFiberPlate : 22 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : 8 possible sky positions to use as objects from a possible 561. plFiberPlate : 9 possible sky positions to use as objects from a possible 560. plFiberPlate : 20 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : 50 possible sky positions to use as objects from a possible 557. plFiberPlate : 34 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 3 possible sky positions to use as objects from a possible 554. plFiberPlate : 11 possible sky positions to use as objects from a possible 553. plFiberPlate : 21 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0513.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0514.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0514.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0515.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 116 2 14 95 3 18 95 4 22 117 5 18 134 6 13 79 7 10 78 8 13 111 9 13 113 10 26 165 11 16 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 358 24 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 364 45 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 354 14 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 358 30 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 363 10 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 360 24 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 348 35 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 350 12 plFiberPlate : 132 possible sky positions to use as objects from a possible 618. plFiberPlate : 71 possible sky positions to use as objects from a possible 617. plFiberPlate : 70 possible sky positions to use as objects from a possible 616. plFiberPlate : 37 possible sky positions to use as objects from a possible 615. plFiberPlate : 27 possible sky positions to use as objects from a possible 614. plFiberPlate : 42 possible sky positions to use as objects from a possible 613. plFiberPlate : 42 possible sky positions to use as objects from a possible 612. plFiberPlate : 112 possible sky positions to use as objects from a possible 611. plFiberPlate : 78 possible sky positions to use as objects from a possible 610. plFiberPlate : 58 possible sky positions to use as objects from a possible 609. plFiberPlate : 32 possible sky positions to use as objects from a possible 608. plFiberPlate : 16 possible sky positions to use as objects from a possible 607. plFiberPlate : 8 possible sky positions to use as objects from a possible 606. plFiberPlate : 9 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 25 possible sky positions to use as objects from a possible 603. plFiberPlate : 77 possible sky positions to use as objects from a possible 602. plFiberPlate : 50 possible sky positions to use as objects from a possible 601. plFiberPlate : 31 possible sky positions to use as objects from a possible 600. plFiberPlate : 16 possible sky positions to use as objects from a possible 599. plFiberPlate : 10 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 33 possible sky positions to use as objects from a possible 594. plFiberPlate : 34 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : 6 possible sky positions to use as objects from a possible 590. plFiberPlate : 5 possible sky positions to use as objects from a possible 589. plFiberPlate : 9 possible sky positions to use as objects from a possible 588. plFiberPlate : 10 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0514.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0515.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0515.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0516.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 134 2 28 97 3 22 86 4 20 96 5 16 107 6 7 68 7 10 81 8 15 122 9 22 84 10 32 145 11 23 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 372 47 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 365 22 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 374 48 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 379 49 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 363 10 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 371 25 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 360 24 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 370 23 plFiberPlate : 91 possible sky positions to use as objects from a possible 583. plFiberPlate : 61 possible sky positions to use as objects from a possible 582. plFiberPlate : 40 possible sky positions to use as objects from a possible 581. plFiberPlate : 23 possible sky positions to use as objects from a possible 580. plFiberPlate : 23 possible sky positions to use as objects from a possible 579. plFiberPlate : 25 possible sky positions to use as objects from a possible 578. plFiberPlate : 66 possible sky positions to use as objects from a possible 577. plFiberPlate : 78 possible sky positions to use as objects from a possible 576. plFiberPlate : 44 possible sky positions to use as objects from a possible 575. plFiberPlate : 26 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 3 possible sky positions to use as objects from a possible 572. plFiberPlate : 6 possible sky positions to use as objects from a possible 571. plFiberPlate : 3 possible sky positions to use as objects from a possible 570. plFiberPlate : 33 possible sky positions to use as objects from a possible 569. plFiberPlate : 41 possible sky positions to use as objects from a possible 568. plFiberPlate : 84 possible sky positions to use as objects from a possible 567. plFiberPlate : 72 possible sky positions to use as objects from a possible 566. plFiberPlate : 44 possible sky positions to use as objects from a possible 565. plFiberPlate : 29 possible sky positions to use as objects from a possible 564. plFiberPlate : 25 possible sky positions to use as objects from a possible 563. plFiberPlate : 13 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 18 possible sky positions to use as objects from a possible 560. plFiberPlate : 73 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : 10 possible sky positions to use as objects from a possible 557. plFiberPlate : 4 possible sky positions to use as objects from a possible 556. plFiberPlate : 4 possible sky positions to use as objects from a possible 555. plFiberPlate : 6 possible sky positions to use as objects from a possible 554. plFiberPlate : 6 possible sky positions to use as objects from a possible 553. plFiberPlate : 7 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0515.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0516.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0516.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0517.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 130 2 16 96 3 17 87 4 17 96 5 14 119 6 11 84 7 11 81 8 18 125 9 19 104 10 28 143 11 18 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 377 43 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 386 12 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 379 49 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 385 50 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 379 50 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 386 49 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 380 67 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 378 19 plFiberPlate : 96 possible sky positions to use as objects from a possible 589. plFiberPlate : 70 possible sky positions to use as objects from a possible 588. plFiberPlate : 64 possible sky positions to use as objects from a possible 587. plFiberPlate : 39 possible sky positions to use as objects from a possible 586. plFiberPlate : 31 possible sky positions to use as objects from a possible 585. plFiberPlate : 44 possible sky positions to use as objects from a possible 584. plFiberPlate : 35 possible sky positions to use as objects from a possible 583. plFiberPlate : 68 possible sky positions to use as objects from a possible 582. plFiberPlate : 61 possible sky positions to use as objects from a possible 581. plFiberPlate : 57 possible sky positions to use as objects from a possible 580. plFiberPlate : 52 possible sky positions to use as objects from a possible 579. plFiberPlate : 47 possible sky positions to use as objects from a possible 578. plFiberPlate : 32 possible sky positions to use as objects from a possible 577. plFiberPlate : 3 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : 57 possible sky positions to use as objects from a possible 574. plFiberPlate : 80 possible sky positions to use as objects from a possible 573. plFiberPlate : 61 possible sky positions to use as objects from a possible 572. plFiberPlate : 60 possible sky positions to use as objects from a possible 571. plFiberPlate : 44 possible sky positions to use as objects from a possible 570. plFiberPlate : 26 possible sky positions to use as objects from a possible 569. plFiberPlate : 9 possible sky positions to use as objects from a possible 568. plFiberPlate : 6 possible sky positions to use as objects from a possible 567. plFiberPlate : 9 possible sky positions to use as objects from a possible 566. plFiberPlate : 59 possible sky positions to use as objects from a possible 565. plFiberPlate : 55 possible sky positions to use as objects from a possible 564. plFiberPlate : 44 possible sky positions to use as objects from a possible 563. plFiberPlate : 24 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : 12 possible sky positions to use as objects from a possible 560. plFiberPlate : 7 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0516.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0517.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0517.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0518.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 127 2 27 95 3 18 96 4 19 106 5 20 111 6 16 70 7 12 62 8 17 110 9 13 98 10 31 152 11 26 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 391 41 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 399 23 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 403 36 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 393 42 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 385 50 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 392 14 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 399 2 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 395 50 plFiberPlate : 121 possible sky positions to use as objects from a possible 576. plFiberPlate : 74 possible sky positions to use as objects from a possible 575. plFiberPlate : 50 possible sky positions to use as objects from a possible 574. plFiberPlate : 27 possible sky positions to use as objects from a possible 573. plFiberPlate : 26 possible sky positions to use as objects from a possible 572. plFiberPlate : 32 possible sky positions to use as objects from a possible 571. plFiberPlate : 47 possible sky positions to use as objects from a possible 570. plFiberPlate : 86 possible sky positions to use as objects from a possible 569. plFiberPlate : 65 possible sky positions to use as objects from a possible 568. plFiberPlate : 46 possible sky positions to use as objects from a possible 567. plFiberPlate : 41 possible sky positions to use as objects from a possible 566. plFiberPlate : 12 possible sky positions to use as objects from a possible 565. plFiberPlate : 15 possible sky positions to use as objects from a possible 564. plFiberPlate : 8 possible sky positions to use as objects from a possible 563. plFiberPlate : 2 possible sky positions to use as objects from a possible 562. plFiberPlate : 55 possible sky positions to use as objects from a possible 561. plFiberPlate : 89 possible sky positions to use as objects from a possible 560. plFiberPlate : 77 possible sky positions to use as objects from a possible 559. plFiberPlate : 58 possible sky positions to use as objects from a possible 558. plFiberPlate : 47 possible sky positions to use as objects from a possible 557. plFiberPlate : 32 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 21 possible sky positions to use as objects from a possible 554. plFiberPlate : 16 possible sky positions to use as objects from a possible 553. plFiberPlate : 54 possible sky positions to use as objects from a possible 552. plFiberPlate : 15 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 1 possible sky positions to use as objects from a possible 549. plFiberPlate : 1 possible sky positions to use as objects from a possible 548. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 64.065 252.967, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 64.065 252.967, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 547. plFiberPlate: No sky found for bundle at 64.065 252.967, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 547. plFiberPlate : 1 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0517.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0518.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0518.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0519.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 137 2 22 99 3 15 77 4 10 96 5 20 105 6 16 71 7 12 79 8 17 126 9 15 104 10 29 128 11 23 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 404 8 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 407 20 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 398 30 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 411 65 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 409 25 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 415 34 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 409 48 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 410 36 plFiberPlate : 89 possible sky positions to use as objects from a possible 573. plFiberPlate : 62 possible sky positions to use as objects from a possible 572. plFiberPlate : 50 possible sky positions to use as objects from a possible 571. plFiberPlate : 39 possible sky positions to use as objects from a possible 570. plFiberPlate : 16 possible sky positions to use as objects from a possible 569. plFiberPlate : 55 possible sky positions to use as objects from a possible 568. plFiberPlate : 53 possible sky positions to use as objects from a possible 567. plFiberPlate : 52 possible sky positions to use as objects from a possible 566. plFiberPlate : 54 possible sky positions to use as objects from a possible 565. plFiberPlate : 42 possible sky positions to use as objects from a possible 564. plFiberPlate : 27 possible sky positions to use as objects from a possible 563. plFiberPlate : 18 possible sky positions to use as objects from a possible 562. plFiberPlate : 5 possible sky positions to use as objects from a possible 561. plFiberPlate : 18 possible sky positions to use as objects from a possible 560. plFiberPlate : 29 possible sky positions to use as objects from a possible 559. plFiberPlate : 44 possible sky positions to use as objects from a possible 558. plFiberPlate : 61 possible sky positions to use as objects from a possible 557. plFiberPlate : 51 possible sky positions to use as objects from a possible 556. plFiberPlate : 36 possible sky positions to use as objects from a possible 555. plFiberPlate : 26 possible sky positions to use as objects from a possible 554. plFiberPlate : 14 possible sky positions to use as objects from a possible 553. plFiberPlate : 9 possible sky positions to use as objects from a possible 552. plFiberPlate : 9 possible sky positions to use as objects from a possible 551. plFiberPlate : 11 possible sky positions to use as objects from a possible 550. plFiberPlate : 50 possible sky positions to use as objects from a possible 549. plFiberPlate : 47 possible sky positions to use as objects from a possible 548. plFiberPlate : 40 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 13 possible sky positions to use as objects from a possible 545. plFiberPlate : 13 possible sky positions to use as objects from a possible 544. plFiberPlate : 9 possible sky positions to use as objects from a possible 543. plFiberPlate : 39 possible sky positions to use as objects from a possible 542. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0518.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0519.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0519.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0520.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 126 2 18 92 3 20 74 4 18 99 5 18 106 6 9 73 7 10 74 8 21 110 9 16 99 10 23 152 11 13 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 418 23 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 411 65 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 423 14 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 420 20 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 415 79 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 415 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 410 36 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 422 20 plFiberPlate : 119 possible sky positions to use as objects from a possible 562. plFiberPlate : 75 possible sky positions to use as objects from a possible 561. plFiberPlate : 50 possible sky positions to use as objects from a possible 560. plFiberPlate : 35 possible sky positions to use as objects from a possible 559. plFiberPlate : 30 possible sky positions to use as objects from a possible 558. plFiberPlate : 21 possible sky positions to use as objects from a possible 557. plFiberPlate : 48 possible sky positions to use as objects from a possible 556. plFiberPlate : 83 possible sky positions to use as objects from a possible 555. plFiberPlate : 60 possible sky positions to use as objects from a possible 554. plFiberPlate : 44 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 16 possible sky positions to use as objects from a possible 549. plFiberPlate : 6 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 47 possible sky positions to use as objects from a possible 546. plFiberPlate : 52 possible sky positions to use as objects from a possible 545. plFiberPlate : 22 possible sky positions to use as objects from a possible 544. plFiberPlate : 15 possible sky positions to use as objects from a possible 543. plFiberPlate : 14 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 28 possible sky positions to use as objects from a possible 539. plFiberPlate : 24 possible sky positions to use as objects from a possible 538. plFiberPlate : 39 possible sky positions to use as objects from a possible 537. plFiberPlate : 20 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 12 possible sky positions to use as objects from a possible 534. plFiberPlate : 14 possible sky positions to use as objects from a possible 533. plFiberPlate : 4 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0519.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0520.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0520.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0521.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 132 2 23 104 3 12 101 4 14 123 5 19 113 6 9 61 7 9 64 8 15 107 9 13 88 10 28 162 11 22 121 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 427 107 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 431 19 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 443 32 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 429 14 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 436 32 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 429 27 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 429 45 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 442 15 plFiberPlate : 134 possible sky positions to use as objects from a possible 586. plFiberPlate : 60 possible sky positions to use as objects from a possible 585. plFiberPlate : 53 possible sky positions to use as objects from a possible 584. plFiberPlate : 34 possible sky positions to use as objects from a possible 583. plFiberPlate : 27 possible sky positions to use as objects from a possible 582. plFiberPlate : 46 possible sky positions to use as objects from a possible 581. plFiberPlate : 49 possible sky positions to use as objects from a possible 580. plFiberPlate : 86 possible sky positions to use as objects from a possible 579. plFiberPlate : 75 possible sky positions to use as objects from a possible 578. plFiberPlate : 31 possible sky positions to use as objects from a possible 577. plFiberPlate : 14 possible sky positions to use as objects from a possible 576. plFiberPlate : 7 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 18 possible sky positions to use as objects from a possible 573. plFiberPlate : 27 possible sky positions to use as objects from a possible 572. plFiberPlate : 16 possible sky positions to use as objects from a possible 571. plFiberPlate : 62 possible sky positions to use as objects from a possible 570. plFiberPlate : 28 possible sky positions to use as objects from a possible 569. plFiberPlate : 14 possible sky positions to use as objects from a possible 568. plFiberPlate : 11 possible sky positions to use as objects from a possible 567. plFiberPlate : 10 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 4 possible sky positions to use as objects from a possible 564. plFiberPlate : 3 possible sky positions to use as objects from a possible 563. plFiberPlate : 46 possible sky positions to use as objects from a possible 562. plFiberPlate : 39 possible sky positions to use as objects from a possible 561. plFiberPlate : 24 possible sky positions to use as objects from a possible 560. plFiberPlate : 12 possible sky positions to use as objects from a possible 559. plFiberPlate : 8 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 8 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 682 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0520.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0521.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0521.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0522.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 114 2 22 103 3 18 92 4 15 107 5 18 117 6 17 83 7 14 82 8 18 116 9 15 105 10 27 154 11 21 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 450 19 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 442 27 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 447 42 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 453 28 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 443 84 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 443 32 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 446 28 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 442 15 plFiberPlate : 113 possible sky positions to use as objects from a possible 600. plFiberPlate : 89 possible sky positions to use as objects from a possible 599. plFiberPlate : 92 possible sky positions to use as objects from a possible 598. plFiberPlate : 55 possible sky positions to use as objects from a possible 597. plFiberPlate : 55 possible sky positions to use as objects from a possible 596. plFiberPlate : 30 possible sky positions to use as objects from a possible 595. plFiberPlate : 70 possible sky positions to use as objects from a possible 594. plFiberPlate : 73 possible sky positions to use as objects from a possible 593. plFiberPlate : 64 possible sky positions to use as objects from a possible 592. plFiberPlate : 45 possible sky positions to use as objects from a possible 591. plFiberPlate : 31 possible sky positions to use as objects from a possible 590. plFiberPlate : 16 possible sky positions to use as objects from a possible 589. plFiberPlate : 10 possible sky positions to use as objects from a possible 588. plFiberPlate : 6 possible sky positions to use as objects from a possible 587. plFiberPlate : 13 possible sky positions to use as objects from a possible 586. plFiberPlate : 35 possible sky positions to use as objects from a possible 585. plFiberPlate : 74 possible sky positions to use as objects from a possible 584. plFiberPlate : 45 possible sky positions to use as objects from a possible 583. plFiberPlate : 57 possible sky positions to use as objects from a possible 582. plFiberPlate : 27 possible sky positions to use as objects from a possible 581. plFiberPlate : 15 possible sky positions to use as objects from a possible 580. plFiberPlate : 25 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 21 possible sky positions to use as objects from a possible 577. plFiberPlate : 31 possible sky positions to use as objects from a possible 576. plFiberPlate : 47 possible sky positions to use as objects from a possible 575. plFiberPlate : 34 possible sky positions to use as objects from a possible 574. plFiberPlate : 16 possible sky positions to use as objects from a possible 573. plFiberPlate : 16 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 17 possible sky positions to use as objects from a possible 569. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 685 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0521.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0522.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0522.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0523.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 115 2 22 101 3 30 85 4 29 113 5 25 123 6 14 66 7 20 74 8 24 109 9 16 88 10 36 150 11 21 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 453 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 467 35 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 472 18 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 466 40 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 459 68 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 453 28 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 454 50 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 454 30 plFiberPlate : 124 possible sky positions to use as objects from a possible 585. plFiberPlate : 79 possible sky positions to use as objects from a possible 584. plFiberPlate : 45 possible sky positions to use as objects from a possible 583. plFiberPlate : 42 possible sky positions to use as objects from a possible 582. plFiberPlate : 32 possible sky positions to use as objects from a possible 581. plFiberPlate : 28 possible sky positions to use as objects from a possible 580. plFiberPlate : 29 possible sky positions to use as objects from a possible 579. plFiberPlate : 91 possible sky positions to use as objects from a possible 578. plFiberPlate : 42 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 8 possible sky positions to use as objects from a possible 575. plFiberPlate : 14 possible sky positions to use as objects from a possible 574. plFiberPlate : 15 possible sky positions to use as objects from a possible 573. plFiberPlate : 10 possible sky positions to use as objects from a possible 572. plFiberPlate : 22 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 69 possible sky positions to use as objects from a possible 569. plFiberPlate : 41 possible sky positions to use as objects from a possible 568. plFiberPlate : 22 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : 13 possible sky positions to use as objects from a possible 563. plFiberPlate : 25 possible sky positions to use as objects from a possible 562. plFiberPlate : 26 possible sky positions to use as objects from a possible 561. plFiberPlate : 31 possible sky positions to use as objects from a possible 560. plFiberPlate : 13 possible sky positions to use as objects from a possible 559. plFiberPlate : 4 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 8 possible sky positions to use as objects from a possible 556. plFiberPlate : 7 possible sky positions to use as objects from a possible 555. plFiberPlate : 10 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0522.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0523.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0523.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0524.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 103 2 25 85 3 23 93 4 11 113 5 16 125 6 11 73 7 10 76 8 13 105 9 11 104 10 40 158 11 23 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 466 40 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 476 2 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 484 15 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 475 12 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 470 46 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 469 43 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 475 28 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 486 21 plFiberPlate : 129 possible sky positions to use as objects from a possible 574. plFiberPlate : 79 possible sky positions to use as objects from a possible 573. plFiberPlate : 38 possible sky positions to use as objects from a possible 572. plFiberPlate : 25 possible sky positions to use as objects from a possible 571. plFiberPlate : 20 possible sky positions to use as objects from a possible 570. plFiberPlate : 19 possible sky positions to use as objects from a possible 569. plFiberPlate : 43 possible sky positions to use as objects from a possible 568. plFiberPlate : 86 possible sky positions to use as objects from a possible 567. plFiberPlate : 71 possible sky positions to use as objects from a possible 566. plFiberPlate : 23 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : 14 possible sky positions to use as objects from a possible 562. plFiberPlate : 24 possible sky positions to use as objects from a possible 561. plFiberPlate : 17 possible sky positions to use as objects from a possible 560. plFiberPlate : 15 possible sky positions to use as objects from a possible 559. plFiberPlate : 74 possible sky positions to use as objects from a possible 558. plFiberPlate : 28 possible sky positions to use as objects from a possible 557. plFiberPlate : 13 possible sky positions to use as objects from a possible 556. plFiberPlate : 5 possible sky positions to use as objects from a possible 555. plFiberPlate : 17 possible sky positions to use as objects from a possible 554. plFiberPlate : 17 possible sky positions to use as objects from a possible 553. plFiberPlate : 8 possible sky positions to use as objects from a possible 552. plFiberPlate : 15 possible sky positions to use as objects from a possible 551. plFiberPlate : 22 possible sky positions to use as objects from a possible 550. plFiberPlate : 36 possible sky positions to use as objects from a possible 549. plFiberPlate : 21 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 13 possible sky positions to use as objects from a possible 544. plFiberPlate : 5 possible sky positions to use as objects from a possible 543. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0523.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0524.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0524.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0525.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 115 2 26 91 3 21 96 4 19 116 5 16 111 6 13 88 7 15 75 8 13 105 9 10 97 10 30 144 11 22 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 476 2 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 492 19 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 484 15 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 488 24 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 490 16 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 496 39 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 480 46 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 486 21 plFiberPlate : 119 possible sky positions to use as objects from a possible 580. plFiberPlate : 70 possible sky positions to use as objects from a possible 579. plFiberPlate : 40 possible sky positions to use as objects from a possible 578. plFiberPlate : 29 possible sky positions to use as objects from a possible 577. plFiberPlate : 29 possible sky positions to use as objects from a possible 576. plFiberPlate : 18 possible sky positions to use as objects from a possible 575. plFiberPlate : 39 possible sky positions to use as objects from a possible 574. plFiberPlate : 79 possible sky positions to use as objects from a possible 573. plFiberPlate : 61 possible sky positions to use as objects from a possible 572. plFiberPlate : 23 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 7 possible sky positions to use as objects from a possible 567. plFiberPlate : 12 possible sky positions to use as objects from a possible 566. plFiberPlate : 17 possible sky positions to use as objects from a possible 565. plFiberPlate : 83 possible sky positions to use as objects from a possible 564. plFiberPlate : 60 possible sky positions to use as objects from a possible 563. plFiberPlate : 20 possible sky positions to use as objects from a possible 562. plFiberPlate : 16 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : 6 possible sky positions to use as objects from a possible 559. plFiberPlate : 15 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : 24 possible sky positions to use as objects from a possible 556. plFiberPlate : 38 possible sky positions to use as objects from a possible 555. plFiberPlate : 27 possible sky positions to use as objects from a possible 554. plFiberPlate : 14 possible sky positions to use as objects from a possible 553. plFiberPlate : 6 possible sky positions to use as objects from a possible 552. plFiberPlate : 16 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0524.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0525.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0525.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0526.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 116 2 19 96 3 22 89 4 20 96 5 19 134 6 11 80 7 9 77 8 16 107 9 13 109 10 24 143 11 17 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 504 40 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 511 35 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 505 45 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 492 19 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 490 16 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 496 36 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 507 24 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 496 39 plFiberPlate : 106 possible sky positions to use as objects from a possible 573. plFiberPlate : 43 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : 27 possible sky positions to use as objects from a possible 569. plFiberPlate : 31 possible sky positions to use as objects from a possible 568. plFiberPlate : 34 possible sky positions to use as objects from a possible 567. plFiberPlate : 67 possible sky positions to use as objects from a possible 566. plFiberPlate : 38 possible sky positions to use as objects from a possible 565. plFiberPlate : 21 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : 10 possible sky positions to use as objects from a possible 562. plFiberPlate : 11 possible sky positions to use as objects from a possible 561. plFiberPlate : 23 possible sky positions to use as objects from a possible 560. plFiberPlate : 17 possible sky positions to use as objects from a possible 559. plFiberPlate : 18 possible sky positions to use as objects from a possible 558. plFiberPlate : 101 possible sky positions to use as objects from a possible 557. plFiberPlate : 38 possible sky positions to use as objects from a possible 556. plFiberPlate : 24 possible sky positions to use as objects from a possible 555. plFiberPlate : 5 possible sky positions to use as objects from a possible 554. plFiberPlate : 4 possible sky positions to use as objects from a possible 553. plFiberPlate : 9 possible sky positions to use as objects from a possible 552. plFiberPlate : 26 possible sky positions to use as objects from a possible 551. plFiberPlate : 20 possible sky positions to use as objects from a possible 550. plFiberPlate : 20 possible sky positions to use as objects from a possible 549. plFiberPlate : 41 possible sky positions to use as objects from a possible 548. plFiberPlate : 22 possible sky positions to use as objects from a possible 547. plFiberPlate : 12 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 4 possible sky positions to use as objects from a possible 544. plFiberPlate : 12 possible sky positions to use as objects from a possible 543. plFiberPlate : 14 possible sky positions to use as objects from a possible 542. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 683 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0525.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0526.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0526.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0527.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 106 2 23 86 3 23 98 4 21 116 5 22 121 6 11 81 7 10 73 8 13 106 9 16 101 10 34 139 11 20 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 512 47 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 513 7 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 521 26 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 518 46 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 513 12 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 505 45 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 507 24 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 515 48 plFiberPlate : 101 possible sky positions to use as objects from a possible 572. plFiberPlate : 36 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 13 possible sky positions to use as objects from a possible 569. plFiberPlate : 47 possible sky positions to use as objects from a possible 568. plFiberPlate : 9 possible sky positions to use as objects from a possible 567. plFiberPlate : 34 possible sky positions to use as objects from a possible 566. plFiberPlate : 86 possible sky positions to use as objects from a possible 565. plFiberPlate : 47 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : 9 possible sky positions to use as objects from a possible 562. plFiberPlate : 13 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 10 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 15 possible sky positions to use as objects from a possible 557. plFiberPlate : 85 possible sky positions to use as objects from a possible 556. plFiberPlate : 62 possible sky positions to use as objects from a possible 555. plFiberPlate : 42 possible sky positions to use as objects from a possible 554. plFiberPlate : 15 possible sky positions to use as objects from a possible 553. plFiberPlate : 10 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : 5 possible sky positions to use as objects from a possible 550. plFiberPlate : 27 possible sky positions to use as objects from a possible 549. plFiberPlate : 27 possible sky positions to use as objects from a possible 548. plFiberPlate : 50 possible sky positions to use as objects from a possible 547. plFiberPlate : 27 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 6 possible sky positions to use as objects from a possible 544. plFiberPlate : 10 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0526.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0527.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0527.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0528.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 112 2 21 102 3 20 91 4 21 113 5 15 125 6 9 68 7 11 56 8 10 92 9 12 96 10 30 147 11 26 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 522 53 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 529 2 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 526 26 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 524 26 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 520 2 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 535 24 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 522 44 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 521 68 plFiberPlate : 120 possible sky positions to use as objects from a possible 547. plFiberPlate : 64 possible sky positions to use as objects from a possible 546. plFiberPlate : 33 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 20 possible sky positions to use as objects from a possible 543. plFiberPlate : 31 possible sky positions to use as objects from a possible 542. plFiberPlate : 46 possible sky positions to use as objects from a possible 541. plFiberPlate : 58 possible sky positions to use as objects from a possible 540. plFiberPlate : 36 possible sky positions to use as objects from a possible 539. plFiberPlate : 17 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 14 possible sky positions to use as objects from a possible 536. plFiberPlate : 12 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : 83 possible sky positions to use as objects from a possible 531. plFiberPlate : 29 possible sky positions to use as objects from a possible 530. plFiberPlate : 17 possible sky positions to use as objects from a possible 529. plFiberPlate : 6 possible sky positions to use as objects from a possible 528. plFiberPlate : 4 possible sky positions to use as objects from a possible 527. plFiberPlate : 11 possible sky positions to use as objects from a possible 526. plFiberPlate : 9 possible sky positions to use as objects from a possible 525. plFiberPlate : 7 possible sky positions to use as objects from a possible 524. plFiberPlate : 15 possible sky positions to use as objects from a possible 523. plFiberPlate : 29 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 4 possible sky positions to use as objects from a possible 520. plFiberPlate : 2 possible sky positions to use as objects from a possible 519. plFiberPlate : 4 possible sky positions to use as objects from a possible 518. plFiberPlate : 5 possible sky positions to use as objects from a possible 517. plFiberPlate : 7 possible sky positions to use as objects from a possible 516. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0527.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0528.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0528.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0529.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 138 2 16 113 3 21 105 4 23 114 5 13 121 6 10 68 7 11 76 8 20 130 9 14 80 10 21 154 11 18 129 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 537 41 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 541 19 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 549 24 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 542 29 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 539 19 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 539 14 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 537 6 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 545 62 plFiberPlate : 102 possible sky positions to use as objects from a possible 611. plFiberPlate : 77 possible sky positions to use as objects from a possible 610. plFiberPlate : 54 possible sky positions to use as objects from a possible 609. plFiberPlate : 35 possible sky positions to use as objects from a possible 608. plFiberPlate : 36 possible sky positions to use as objects from a possible 607. plFiberPlate : 32 possible sky positions to use as objects from a possible 606. plFiberPlate : 85 possible sky positions to use as objects from a possible 605. plFiberPlate : 55 possible sky positions to use as objects from a possible 604. plFiberPlate : 45 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 6 possible sky positions to use as objects from a possible 601. plFiberPlate : 5 possible sky positions to use as objects from a possible 600. plFiberPlate : 3 possible sky positions to use as objects from a possible 599. plFiberPlate : 1 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 46 possible sky positions to use as objects from a possible 596. plFiberPlate : 61 possible sky positions to use as objects from a possible 595. plFiberPlate : 46 possible sky positions to use as objects from a possible 594. plFiberPlate : 31 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : 3 possible sky positions to use as objects from a possible 591. plFiberPlate : 2 possible sky positions to use as objects from a possible 590. plFiberPlate : 2 possible sky positions to use as objects from a possible 589. plFiberPlate : 1 possible sky positions to use as objects from a possible 588. plFiberPlate : 2 possible sky positions to use as objects from a possible 587. plFiberPlate : 24 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 6 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 8 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0528.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0529.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0529.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0530.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 140 2 26 117 3 18 85 4 21 94 5 19 105 6 11 55 7 11 66 8 18 126 9 12 92 10 30 152 11 28 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 551 27 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 547 19 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 543 23 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 550 25 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 558 39 plFiberPlate : adding spectro-photo std with objId = 1458 2 6 554 48 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 555 26 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 545 62 plFiberPlate : 102 possible sky positions to use as objects from a possible 570. plFiberPlate : 91 possible sky positions to use as objects from a possible 569. plFiberPlate : 60 possible sky positions to use as objects from a possible 568. plFiberPlate : 24 possible sky positions to use as objects from a possible 567. plFiberPlate : 18 possible sky positions to use as objects from a possible 566. plFiberPlate : 29 possible sky positions to use as objects from a possible 565. plFiberPlate : 70 possible sky positions to use as objects from a possible 564. plFiberPlate : 67 possible sky positions to use as objects from a possible 563. plFiberPlate : 43 possible sky positions to use as objects from a possible 562. plFiberPlate : 45 possible sky positions to use as objects from a possible 561. plFiberPlate : 37 possible sky positions to use as objects from a possible 560. plFiberPlate : 23 possible sky positions to use as objects from a possible 559. plFiberPlate : 18 possible sky positions to use as objects from a possible 558. plFiberPlate : 4 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 27 possible sky positions to use as objects from a possible 555. plFiberPlate : 49 possible sky positions to use as objects from a possible 554. plFiberPlate : 52 possible sky positions to use as objects from a possible 553. plFiberPlate : 33 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 6 possible sky positions to use as objects from a possible 550. plFiberPlate : 7 possible sky positions to use as objects from a possible 549. plFiberPlate : 3 possible sky positions to use as objects from a possible 548. plFiberPlate : 11 possible sky positions to use as objects from a possible 547. plFiberPlate : 45 possible sky positions to use as objects from a possible 546. plFiberPlate : 36 possible sky positions to use as objects from a possible 545. plFiberPlate : 31 possible sky positions to use as objects from a possible 544. plFiberPlate : 28 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 14 possible sky positions to use as objects from a possible 541. plFiberPlate : 19 possible sky positions to use as objects from a possible 540. plFiberPlate : 19 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0529.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0530.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0530.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0531.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 121 2 19 103 3 17 107 4 25 112 5 17 115 6 12 79 7 20 68 8 29 102 9 16 100 10 37 148 11 24 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 571 64 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 564 61 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 572 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 1 563 16 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 558 39 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 573 54 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 558 39 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 560 39 plFiberPlate : 123 possible sky positions to use as objects from a possible 579. plFiberPlate : 64 possible sky positions to use as objects from a possible 578. plFiberPlate : 45 possible sky positions to use as objects from a possible 577. plFiberPlate : 24 possible sky positions to use as objects from a possible 576. plFiberPlate : 27 possible sky positions to use as objects from a possible 575. plFiberPlate : 15 possible sky positions to use as objects from a possible 574. plFiberPlate : 48 possible sky positions to use as objects from a possible 573. plFiberPlate : 60 possible sky positions to use as objects from a possible 572. plFiberPlate : 51 possible sky positions to use as objects from a possible 571. plFiberPlate : 40 possible sky positions to use as objects from a possible 570. plFiberPlate : 23 possible sky positions to use as objects from a possible 569. plFiberPlate : 0 possible sky positions to use as objects from a possible 568. plFiberPlate: No sky found for bundle at -1.554 -36.508, increase box by 10 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 568. plFiberPlate : 5 possible sky positions to use as objects from a possible 567. plFiberPlate : 15 possible sky positions to use as objects from a possible 566. plFiberPlate : 13 possible sky positions to use as objects from a possible 565. plFiberPlate : 33 possible sky positions to use as objects from a possible 564. plFiberPlate : 57 possible sky positions to use as objects from a possible 563. plFiberPlate : 48 possible sky positions to use as objects from a possible 562. plFiberPlate : 35 possible sky positions to use as objects from a possible 561. plFiberPlate : 16 possible sky positions to use as objects from a possible 560. plFiberPlate : 9 possible sky positions to use as objects from a possible 559. plFiberPlate : 11 possible sky positions to use as objects from a possible 558. plFiberPlate : 21 possible sky positions to use as objects from a possible 557. plFiberPlate : 23 possible sky positions to use as objects from a possible 556. plFiberPlate : 11 possible sky positions to use as objects from a possible 555. plFiberPlate : 34 possible sky positions to use as objects from a possible 554. plFiberPlate : 16 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 11 possible sky positions to use as objects from a possible 551. plFiberPlate : 3 possible sky positions to use as objects from a possible 550. plFiberPlate : 11 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0530.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0531.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0531.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0532.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 111 2 26 100 3 24 91 4 21 112 5 27 123 6 14 81 7 5 65 8 16 109 9 13 105 10 29 141 11 23 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 580 2 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 586 37 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 587 55 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 573 54 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 577 17 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 580 12 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 579 12 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 571 53 plFiberPlate : 120 possible sky positions to use as objects from a possible 558. plFiberPlate : 49 possible sky positions to use as objects from a possible 557. plFiberPlate : 20 possible sky positions to use as objects from a possible 556. plFiberPlate : 26 possible sky positions to use as objects from a possible 555. plFiberPlate : 20 possible sky positions to use as objects from a possible 554. plFiberPlate : 21 possible sky positions to use as objects from a possible 553. plFiberPlate : 29 possible sky positions to use as objects from a possible 552. plFiberPlate : 55 possible sky positions to use as objects from a possible 551. plFiberPlate : 36 possible sky positions to use as objects from a possible 550. plFiberPlate : 11 possible sky positions to use as objects from a possible 549. plFiberPlate : 11 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 8 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 89 possible sky positions to use as objects from a possible 542. plFiberPlate : 56 possible sky positions to use as objects from a possible 541. plFiberPlate : 25 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 35 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 44 possible sky positions to use as objects from a possible 533. plFiberPlate : 23 possible sky positions to use as objects from a possible 532. plFiberPlate : 14 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 12 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0531.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0532.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0532.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0533.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 116 2 22 102 3 23 97 4 28 122 5 19 116 6 11 54 7 11 56 8 20 95 9 16 81 10 26 131 11 21 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 599 6 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 593 26 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 587 55 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 594 14 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 600 40 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 592 2 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 601 24 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 589 15 plFiberPlate : 126 possible sky positions to use as objects from a possible 539. plFiberPlate : 62 possible sky positions to use as objects from a possible 538. plFiberPlate : 31 possible sky positions to use as objects from a possible 537. plFiberPlate : 29 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 11 possible sky positions to use as objects from a possible 534. plFiberPlate : 66 possible sky positions to use as objects from a possible 533. plFiberPlate : 59 possible sky positions to use as objects from a possible 532. plFiberPlate : 17 possible sky positions to use as objects from a possible 531. plFiberPlate : 9 possible sky positions to use as objects from a possible 530. plFiberPlate : 5 possible sky positions to use as objects from a possible 529. plFiberPlate : 7 possible sky positions to use as objects from a possible 528. plFiberPlate : 3 possible sky positions to use as objects from a possible 527. plFiberPlate : 4 possible sky positions to use as objects from a possible 526. plFiberPlate : 16 possible sky positions to use as objects from a possible 525. plFiberPlate : 16 possible sky positions to use as objects from a possible 524. plFiberPlate : 82 possible sky positions to use as objects from a possible 523. plFiberPlate : 22 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 6 possible sky positions to use as objects from a possible 518. plFiberPlate : 12 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 26 possible sky positions to use as objects from a possible 515. plFiberPlate : 32 possible sky positions to use as objects from a possible 514. plFiberPlate : 21 possible sky positions to use as objects from a possible 513. plFiberPlate : 9 possible sky positions to use as objects from a possible 512. plFiberPlate : 3 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : 9 possible sky positions to use as objects from a possible 509. plFiberPlate : 21 possible sky positions to use as objects from a possible 508. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0532.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0533.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0533.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0534.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 122 2 17 101 3 13 92 4 18 104 5 20 121 6 11 75 7 14 52 8 29 92 9 17 91 10 34 154 11 21 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 599 54 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 600 62 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 611 67 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 610 9 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 604 21 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 606 37 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 600 40 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 601 24 plFiberPlate : 111 possible sky positions to use as objects from a possible 559. plFiberPlate : 73 possible sky positions to use as objects from a possible 558. plFiberPlate : 44 possible sky positions to use as objects from a possible 557. plFiberPlate : 8 possible sky positions to use as objects from a possible 556. plFiberPlate : 39 possible sky positions to use as objects from a possible 555. plFiberPlate : 35 possible sky positions to use as objects from a possible 554. plFiberPlate : 41 possible sky positions to use as objects from a possible 553. plFiberPlate : 45 possible sky positions to use as objects from a possible 552. plFiberPlate : 49 possible sky positions to use as objects from a possible 551. plFiberPlate : 36 possible sky positions to use as objects from a possible 550. plFiberPlate : 17 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 20 possible sky positions to use as objects from a possible 545. plFiberPlate : 19 possible sky positions to use as objects from a possible 544. plFiberPlate : 57 possible sky positions to use as objects from a possible 543. plFiberPlate : 56 possible sky positions to use as objects from a possible 542. plFiberPlate : 48 possible sky positions to use as objects from a possible 541. plFiberPlate : 42 possible sky positions to use as objects from a possible 540. plFiberPlate : 19 possible sky positions to use as objects from a possible 539. plFiberPlate : 13 possible sky positions to use as objects from a possible 538. plFiberPlate : 11 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : 19 possible sky positions to use as objects from a possible 535. plFiberPlate : 54 possible sky positions to use as objects from a possible 534. plFiberPlate : 25 possible sky positions to use as objects from a possible 533. plFiberPlate : 14 possible sky positions to use as objects from a possible 532. plFiberPlate : 5 possible sky positions to use as objects from a possible 531. plFiberPlate : 4 possible sky positions to use as objects from a possible 530. plFiberPlate : 8 possible sky positions to use as objects from a possible 529. plFiberPlate : 16 possible sky positions to use as objects from a possible 528. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0533.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0534.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0534.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0535.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 259 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 112 2 24 101 3 22 91 4 29 103 5 30 105 6 14 65 7 13 58 8 25 91 9 22 94 10 26 141 11 22 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 618 31 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 615 65 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 610 9 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 607 11 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 623 11 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 618 26 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 627 38 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 622 27 plFiberPlate : 105 possible sky positions to use as objects from a possible 524. plFiberPlate : 41 possible sky positions to use as objects from a possible 523. plFiberPlate : 20 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 23 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 58 possible sky positions to use as objects from a possible 518. plFiberPlate : 60 possible sky positions to use as objects from a possible 517. plFiberPlate : 42 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 4 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 2 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : 21 possible sky positions to use as objects from a possible 509. plFiberPlate : 45 possible sky positions to use as objects from a possible 508. plFiberPlate : 43 possible sky positions to use as objects from a possible 507. plFiberPlate : 19 possible sky positions to use as objects from a possible 506. plFiberPlate : 3 possible sky positions to use as objects from a possible 505. plFiberPlate : 4 possible sky positions to use as objects from a possible 504. plFiberPlate : 6 possible sky positions to use as objects from a possible 503. plFiberPlate : 17 possible sky positions to use as objects from a possible 502. plFiberPlate : 25 possible sky positions to use as objects from a possible 501. plFiberPlate : 12 possible sky positions to use as objects from a possible 500. plFiberPlate : 36 possible sky positions to use as objects from a possible 499. plFiberPlate : 27 possible sky positions to use as objects from a possible 498. plFiberPlate : 16 possible sky positions to use as objects from a possible 497. plFiberPlate : 14 possible sky positions to use as objects from a possible 496. plFiberPlate : 8 possible sky positions to use as objects from a possible 495. plFiberPlate : 9 possible sky positions to use as objects from a possible 494. plFiberPlate : 15 possible sky positions to use as objects from a possible 493. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0534.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0535.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0535.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0536.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 125 2 22 111 3 15 100 4 14 106 5 25 110 6 15 71 7 12 63 8 24 93 9 19 98 10 31 146 11 27 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 635 68 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 635 58 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 631 59 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 628 27 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 629 26 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 626 57 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 636 55 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 627 38 plFiberPlate : 113 possible sky positions to use as objects from a possible 558. plFiberPlate : 77 possible sky positions to use as objects from a possible 557. plFiberPlate : 54 possible sky positions to use as objects from a possible 556. plFiberPlate : 24 possible sky positions to use as objects from a possible 555. plFiberPlate : 44 possible sky positions to use as objects from a possible 554. plFiberPlate : 50 possible sky positions to use as objects from a possible 553. plFiberPlate : 40 possible sky positions to use as objects from a possible 552. plFiberPlate : 38 possible sky positions to use as objects from a possible 551. plFiberPlate : 24 possible sky positions to use as objects from a possible 550. plFiberPlate : 32 possible sky positions to use as objects from a possible 549. plFiberPlate : 18 possible sky positions to use as objects from a possible 548. plFiberPlate : 7 possible sky positions to use as objects from a possible 547. plFiberPlate : 11 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 22 possible sky positions to use as objects from a possible 544. plFiberPlate : 21 possible sky positions to use as objects from a possible 543. plFiberPlate : 65 possible sky positions to use as objects from a possible 542. plFiberPlate : 54 possible sky positions to use as objects from a possible 541. plFiberPlate : 35 possible sky positions to use as objects from a possible 540. plFiberPlate : 18 possible sky positions to use as objects from a possible 539. plFiberPlate : 14 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 20 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : 45 possible sky positions to use as objects from a possible 533. plFiberPlate : 38 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 17 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 7 possible sky positions to use as objects from a possible 528. plFiberPlate : 19 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0535.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0536.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0536.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0537.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 122 2 17 100 3 14 91 4 30 102 5 28 107 6 14 55 7 14 48 8 19 85 9 22 81 10 36 138 11 26 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 646 64 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 653 25 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 650 75 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 640 45 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 638 16 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 639 9 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 640 50 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 642 32 plFiberPlate : 117 possible sky positions to use as objects from a possible 513. plFiberPlate : 69 possible sky positions to use as objects from a possible 512. plFiberPlate : 36 possible sky positions to use as objects from a possible 511. plFiberPlate : 22 possible sky positions to use as objects from a possible 510. plFiberPlate : 30 possible sky positions to use as objects from a possible 509. plFiberPlate : 43 possible sky positions to use as objects from a possible 508. plFiberPlate : 42 possible sky positions to use as objects from a possible 507. plFiberPlate : 68 possible sky positions to use as objects from a possible 506. plFiberPlate : 56 possible sky positions to use as objects from a possible 505. plFiberPlate : 34 possible sky positions to use as objects from a possible 504. plFiberPlate : 21 possible sky positions to use as objects from a possible 503. plFiberPlate : 9 possible sky positions to use as objects from a possible 502. plFiberPlate : 14 possible sky positions to use as objects from a possible 501. plFiberPlate : 13 possible sky positions to use as objects from a possible 500. plFiberPlate : 22 possible sky positions to use as objects from a possible 499. plFiberPlate : 22 possible sky positions to use as objects from a possible 498. plFiberPlate : 68 possible sky positions to use as objects from a possible 497. plFiberPlate : 46 possible sky positions to use as objects from a possible 496. plFiberPlate : 36 possible sky positions to use as objects from a possible 495. plFiberPlate : 14 possible sky positions to use as objects from a possible 494. plFiberPlate : 10 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 6 possible sky positions to use as objects from a possible 491. plFiberPlate : 19 possible sky positions to use as objects from a possible 490. plFiberPlate : 10 possible sky positions to use as objects from a possible 489. plFiberPlate : 30 possible sky positions to use as objects from a possible 488. plFiberPlate : 14 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 9 possible sky positions to use as objects from a possible 485. plFiberPlate : 12 possible sky positions to use as objects from a possible 484. plFiberPlate : 4 possible sky positions to use as objects from a possible 483. plFiberPlate : 5 possible sky positions to use as objects from a possible 482. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0536.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0537.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0537.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0538.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 66 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 110 2 11 106 3 17 99 4 19 122 5 27 99 6 19 55 7 11 55 8 21 97 9 23 87 10 16 163 11 9 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 669 13 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 653 41 plFiberPlate : adding spectro-photo std with objId = 1458 2 2 657 38 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 660 48 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 653 73 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 662 26 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 654 31 plFiberPlate : adding spectro-photo std with objId = 1462 1 6 656 26 plFiberPlate : 127 possible sky positions to use as objects from a possible 535. plFiberPlate : 75 possible sky positions to use as objects from a possible 534. plFiberPlate : 36 possible sky positions to use as objects from a possible 533. plFiberPlate : 22 possible sky positions to use as objects from a possible 532. plFiberPlate : 33 possible sky positions to use as objects from a possible 531. plFiberPlate : 40 possible sky positions to use as objects from a possible 530. plFiberPlate : 39 possible sky positions to use as objects from a possible 529. plFiberPlate : 68 possible sky positions to use as objects from a possible 528. plFiberPlate : 43 possible sky positions to use as objects from a possible 527. plFiberPlate : 9 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 5 possible sky positions to use as objects from a possible 523. plFiberPlate : 6 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 9 possible sky positions to use as objects from a possible 520. plFiberPlate : 59 possible sky positions to use as objects from a possible 519. plFiberPlate : 33 possible sky positions to use as objects from a possible 518. plFiberPlate : 19 possible sky positions to use as objects from a possible 517. plFiberPlate : 13 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 11 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : 18 possible sky positions to use as objects from a possible 512. plFiberPlate : 11 possible sky positions to use as objects from a possible 511. plFiberPlate : 32 possible sky positions to use as objects from a possible 510. plFiberPlate : 13 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 10 possible sky positions to use as objects from a possible 507. plFiberPlate : 3 possible sky positions to use as objects from a possible 506. plFiberPlate : 5 possible sky positions to use as objects from a possible 505. plFiberPlate : 10 possible sky positions to use as objects from a possible 504. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0537.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0538.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0538.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0539.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 120 2 12 117 3 17 117 4 23 115 5 26 119 6 14 59 7 12 55 8 17 93 9 18 95 10 25 166 11 17 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 666 31 plFiberPlate : adding spectro-photo std with objId = 1462 1 3 661 65 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 669 13 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 678 39 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 669 2 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 665 83 plFiberPlate : adding spectro-photo std with objId = 1458 2 1 675 11 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 669 14 plFiberPlate : 146 possible sky positions to use as objects from a possible 570. plFiberPlate : 83 possible sky positions to use as objects from a possible 569. plFiberPlate : 69 possible sky positions to use as objects from a possible 568. plFiberPlate : 24 possible sky positions to use as objects from a possible 567. plFiberPlate : 24 possible sky positions to use as objects from a possible 566. plFiberPlate : 44 possible sky positions to use as objects from a possible 565. plFiberPlate : 23 possible sky positions to use as objects from a possible 564. plFiberPlate : 53 possible sky positions to use as objects from a possible 563. plFiberPlate : 39 possible sky positions to use as objects from a possible 562. plFiberPlate : 13 possible sky positions to use as objects from a possible 561. plFiberPlate : 6 possible sky positions to use as objects from a possible 560. plFiberPlate : 11 possible sky positions to use as objects from a possible 559. plFiberPlate : 5 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 18 possible sky positions to use as objects from a possible 555. plFiberPlate : 57 possible sky positions to use as objects from a possible 554. plFiberPlate : 28 possible sky positions to use as objects from a possible 553. plFiberPlate : 15 possible sky positions to use as objects from a possible 552. plFiberPlate : 7 possible sky positions to use as objects from a possible 551. plFiberPlate : 8 possible sky positions to use as objects from a possible 550. plFiberPlate : 10 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 12 possible sky positions to use as objects from a possible 547. plFiberPlate : 15 possible sky positions to use as objects from a possible 546. plFiberPlate : 43 possible sky positions to use as objects from a possible 545. plFiberPlate : 26 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 7 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 9 possible sky positions to use as objects from a possible 540. plFiberPlate : 12 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0538.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0539.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0539.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.1/plPlugMapP-0540.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 76 2 26 99 3 16 100 4 24 111 5 27 107 6 16 46 7 16 37 8 12 44 9 22 67 10 29 138 11 27 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 685 52 plFiberPlate : adding spectro-photo std with objId = 1462 1 2 673 100 plFiberPlate : adding spectro-photo std with objId = 1462 1 5 678 20 plFiberPlate : adding spectro-photo std with objId = 1458 2 5 682 115 plFiberPlate : adding spectro-photo std with objId = 1462 1 4 684 100 plFiberPlate : adding spectro-photo std with objId = 1458 2 4 688 67 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 678 39 plFiberPlate : adding spectro-photo std with objId = 1458 2 3 687 28 plFiberPlate : 66 possible sky positions to use as objects from a possible 438. plFiberPlate : 25 possible sky positions to use as objects from a possible 437. plFiberPlate : 48 possible sky positions to use as objects from a possible 436. plFiberPlate : 14 possible sky positions to use as objects from a possible 435. plFiberPlate : 31 possible sky positions to use as objects from a possible 434. plFiberPlate : 27 possible sky positions to use as objects from a possible 433. plFiberPlate : 21 possible sky positions to use as objects from a possible 432. plFiberPlate : 52 possible sky positions to use as objects from a possible 431. plFiberPlate : 32 possible sky positions to use as objects from a possible 430. plFiberPlate : 14 possible sky positions to use as objects from a possible 429. plFiberPlate : 8 possible sky positions to use as objects from a possible 428. plFiberPlate : 0 possible sky positions to use as objects from a possible 427. plFiberPlate: No sky found for bundle at 10.997 -38.524, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 427. plFiberPlate : 4 possible sky positions to use as objects from a possible 426. plFiberPlate : 7 possible sky positions to use as objects from a possible 425. plFiberPlate : 2 possible sky positions to use as objects from a possible 424. plFiberPlate : 7 possible sky positions to use as objects from a possible 423. plFiberPlate : 62 possible sky positions to use as objects from a possible 422. plFiberPlate : 40 possible sky positions to use as objects from a possible 421. plFiberPlate : 11 possible sky positions to use as objects from a possible 420. plFiberPlate : 5 possible sky positions to use as objects from a possible 419. plFiberPlate : 2 possible sky positions to use as objects from a possible 418. plFiberPlate : 5 possible sky positions to use as objects from a possible 417. plFiberPlate : 2 possible sky positions to use as objects from a possible 416. plFiberPlate : 6 possible sky positions to use as objects from a possible 415. plFiberPlate : 3 possible sky positions to use as objects from a possible 414. plFiberPlate : 41 possible sky positions to use as objects from a possible 413. plFiberPlate : 19 possible sky positions to use as objects from a possible 412. plFiberPlate : 12 possible sky positions to use as objects from a possible 411. plFiberPlate : 6 possible sky positions to use as objects from a possible 410. plFiberPlate : 6 possible sky positions to use as objects from a possible 409. plFiberPlate : 8 possible sky positions to use as objects from a possible 408. plFiberPlate : 7 possible sky positions to use as objects from a possible 407. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0539.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0540.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.1/plOverlay-0540.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Jan 19 11:45:24 CST 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/IRIX6/dervish/v7_14/etc/dervishStartup.tcl: Executing commands in /p/IRIX6/dp/v7_5/etc/dpStartup.tcl: loading DP scripts from /p/IRIX6/dp/v7_5 Executing commands in /p/IRIX6/astrotools/v5_0/etc/astrotoolsStartup.tcl Executing commands in /p/IRIX6/plate/v3_4/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 41 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0500.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8820,3.7441) and (12.54,2.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0500.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0500.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0501.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0501.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.5120,-6.3448) and (12.02,4.05) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0501.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0502.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.3474,-11.1195) and (-5.94,-11.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0502.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.1114,-9.6841) and (12.07,-1.27) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0502.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0503.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0503.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0503.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0504.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9118,4.3753) and (12.20,3.12) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0504.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0504.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0505.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0505.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0505.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0506.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.6894,10.2364) and (6.77,10.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0506.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0506.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0507.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.1055,-6.2717) and (11.54,-5.33) plMakeFanucCodes : fixed path between (-11.3810,5.7127) and (-11.87,4.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0507.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0507.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0508.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0508.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0508.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0509.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0509.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0509.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0510.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.3244,-5.6681) and (-11.75,-4.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0510.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0510.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0511.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6848,-4.8439) and (-12.35,-3.16) plMakeFanucCodes : fixed path between (-12.4510,-2.8345) and (-12.74,-1.12) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0511.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0511.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 21 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0512.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0512.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.6137,8.2097) and (-0.17,12.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0512.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0513.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0513.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0513.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0514.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0514.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0514.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0515.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0515.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0515.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0516.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0516.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0516.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0517.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.2213,10.5724) and (6.51,11.01) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0517.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0517.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0518.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0518.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0518.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.7846,-11.8059) and (-0.82,-12.26) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0519.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0519.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0519.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0520.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8573,4.8026) and (12.00,2.79) plMakeFanucCodes : fixed path between (-10.3881,-7.4331) and (-11.07,-5.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0520.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0520.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0521.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0521.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0521.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0522.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.2171,-7.1939) and (11.66,-5.18) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0522.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0522.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0523.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.4742,7.2162) and (-11.07,5.77) plMakeFanucCodes : fixed path between (-4.0603,-11.8168) and (-0.47,-12.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0523.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0523.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0524.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0524.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0524.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0525.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0525.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0525.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0526.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0526.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0526.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0527.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0527.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0527.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0528.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0528.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0528.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0529.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0529.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0529.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0530.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0530.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0530.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0531.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2303,6.0932) and (-11.96,4.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0531.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0531.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0532.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.2579,-12.3540) and (-1.06,-12.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0532.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0532.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0533.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.4801,-2.8528) and (12.62,-0.97) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0533.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0533.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0534.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7146,6.5615) and (11.87,4.51) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0534.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0534.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0535.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0766,-6.2732) and (-11.71,-5.05) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0535.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0535.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0536.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0536.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0536.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0537.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.0133,-11.1192) and (4.53,-11.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0537.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0537.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0538.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0538.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0538.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0539.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0539.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0539.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 657 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0540.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.8845,6.3599) and (-11.52,4.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0540.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.1/plFanuc-0540.par plMakeFanucCodes : temperature difference 21.4 deg C plMakeFanucCodes : using a temp expansion factor of 0.00045454 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Jan 19 11:49:38 CST 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/IRIX6/dervish/v7_14/etc/dervishStartup.tcl: Executing commands in /p/IRIX6/dp/v7_5/etc/dpStartup.tcl: loading DP scripts from /p/IRIX6/dp/v7_5 Executing commands in /p/IRIX6/astrotools/v5_0/etc/astrotoolsStartup.tcl Executing commands in /p/IRIX6/plate/v3_4/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x10b883b0 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 41 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 500 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 501 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 502 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 503 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 504 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 505 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 506 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 507 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 508 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 509 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 510 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 511 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 512 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 689 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 513 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 514 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 515 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 516 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 517 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 518 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 519 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 520 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 521 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 682 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 522 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 685 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 523 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 524 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 525 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 526 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 683 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 527 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 528 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 529 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 530 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 531 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 532 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 533 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 534 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 535 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 536 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 537 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 538 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 539 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 540 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.4 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Jan 19 11:51:42 CST 2001 Begin running plateEnder dr2001.1 -morePipes 1 Executing commands in /p/IRIX6/dervish/v7_14/etc/dervishStartup.tcl: Executing commands in /p/IRIX6/dp/v7_5/etc/dpStartup.tcl: loading DP scripts from /p/IRIX6/dp/v7_5 Executing commands in /p/IRIX6/astrotools/v5_0/etc/astrotoolsStartup.tcl Executing commands in /p/IRIX6/plate/v3_4/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2001.1 -morePipes 1 failed. PS: Read file for stderr output of this job.