Sender: LSF System Subject: Job 49255: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Jun 17 13:18:00 2002 Results reported at Mon Jun 17 13:23:29 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v13_125 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.06.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 293.76 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Jun 17 13:18:03 CDT 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Jun 17 13:18:08 CDT 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_18/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v13_125/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_11/OSF1/bin:/sdss/ups/prd/sdssmath/v5_7/OSF1/bin:/sdss/ups/prd/astrotools/v5_9/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Mon Jun 17 13:18:08 CDT 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_9/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_11/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v13_125/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_18/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_11/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_2/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_7/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a --------------------------------------------------------------- Mon Jun 17 13:18:08 CDT 2002 Begin running plate --------------------------------------------------------------- Mon Jun 17 13:18:08 CDT 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_11/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_125/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_125/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_9/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e93568 makePlates : beginning loop over plObs chain; makePlates : making 21 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0793.par makePlates : plateInfo struct for plate 1038 : (h2).mjd 52443 (h2).raCen 191.7868 (h2).decCen 54.78442 (h2).haCen 33 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 191.787 54.784 191.787 56.284 plMakePlateFromTile : mjd of obs : 52443.589902 Observed HA/dec of plate center, fiducial point (deg) : 32.998 54.772 32.997 56.272 The rotation angle of the fid. point is -119.924163 plMakePlateFromTile : beginning loop over 1296 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0794.par makePlates : plateInfo struct for plate 1039 : (h2).mjd 52443 (h2).raCen 195.4516 (h2).decCen 54.51294 (h2).haCen 29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.452 54.513 195.452 56.013 plMakePlateFromTile : mjd of obs : 52443.588967 Observed HA/dec of plate center, fiducial point (deg) : 28.998 54.500 28.997 56.000 The rotation angle of the fid. point is -124.883510 plMakePlateFromTile : beginning loop over 1293 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-176.14, -88.28, 7.8) and (-175.89, -88.33, 6.0) checkLTHo : distance = 0.259, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-176.14, -88.28, 7.8) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0795.par makePlates : plateInfo struct for plate 1040 : (h2).mjd 52443 (h2).raCen 198.8105 (h2).decCen 54.22355 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 198.810 54.224 198.810 55.724 plMakePlateFromTile : mjd of obs : 52443.589956 Observed HA/dec of plate center, fiducial point (deg) : 25.998 54.211 25.997 55.711 The rotation angle of the fid. point is -128.797017 plMakePlateFromTile : beginning loop over 1269 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (271.95, 157.27, 2.2) and (272.48, 156.50, 3.9) checkLTHo : distance = 0.932, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(272.48, 156.50, 3.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0796.par makePlates : plateInfo struct for plate 1041 : (h2).mjd 52443 (h2).raCen 201.6748 (h2).decCen 53.87094 (h2).haCen 38 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 201.675 53.871 201.675 55.371 plMakePlateFromTile : mjd of obs : 52443.631147 Observed HA/dec of plate center, fiducial point (deg) : 37.998 53.860 37.997 55.359 The rotation angle of the fid. point is -112.614642 plMakePlateFromTile : beginning loop over 1258 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-86.84, 230.12, 2.2) and (-86.35, 229.32, 3.9) checkLTHo : distance = 0.932, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-86.35, 229.32, 3.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0797.par makePlates : plateInfo struct for plate 1042 : (h2).mjd 52443 (h2).raCen 204.6092 (h2).decCen 53.43506 (h2).haCen 35 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 204.609 53.435 204.609 54.935 plMakePlateFromTile : mjd of obs : 52443.630960 Observed HA/dec of plate center, fiducial point (deg) : 34.998 53.424 34.997 54.923 The rotation angle of the fid. point is -115.533907 plMakePlateFromTile : beginning loop over 1294 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0798.par makePlates : plateInfo struct for plate 1043 : (h2).mjd 52443 (h2).raCen 207.668 (h2).decCen 52.70287 (h2).haCen 32 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 207.668 52.703 207.668 54.203 plMakePlateFromTile : mjd of obs : 52443.631118 Observed HA/dec of plate center, fiducial point (deg) : 31.998 52.692 31.997 54.191 The rotation angle of the fid. point is -118.200544 plMakePlateFromTile : beginning loop over 1246 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0799.par makePlates : plateInfo struct for plate 1044 : (h2).mjd 52443 (h2).raCen 211.0952 (h2).decCen 52.11373 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 211.095 52.114 211.095 53.614 plMakePlateFromTile : mjd of obs : 52443.629525 Observed HA/dec of plate center, fiducial point (deg) : 27.998 52.102 27.997 53.602 The rotation angle of the fid. point is -122.679188 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (306.92, -65.77, 4.5) and (306.25, -66.25, 6.6) checkLTHo : distance = 0.818, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(306.25, -66.25, 6.6) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0800.par makePlates : plateInfo struct for plate 1045 : (h2).mjd 52443 (h2).raCen 214.4944 (h2).decCen 51.26758 (h2).haCen 25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 214.494 51.268 214.494 52.768 plMakePlateFromTile : mjd of obs : 52443.630626 Observed HA/dec of plate center, fiducial point (deg) : 24.998 51.256 24.998 52.756 The rotation angle of the fid. point is -125.715962 plMakePlateFromTile : beginning loop over 1294 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-151.30, 114.91, 4.5) and (-151.98, 114.46, 6.6) checkLTHo : distance = 0.814, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-151.98, 114.46, 6.6) checkLTHo : collision between LIGHT_TRAPs (-60.19, 23.82, 8.4) and (-61.56, 21.85, 4.8) checkLTHo : distance = 2.400, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-60.19, 23.82, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0801.par makePlates : plateInfo struct for plate 1046 : (h2).mjd 52443 (h2).raCen 217.4336 (h2).decCen 50.26251 (h2).haCen 37 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 217.434 50.263 217.434 51.763 plMakePlateFromTile : mjd of obs : 52443.672024 Observed HA/dec of plate center, fiducial point (deg) : 36.998 50.253 36.997 51.752 The rotation angle of the fid. point is -108.575305 plMakePlateFromTile : beginning loop over 1269 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0802.par makePlates : plateInfo struct for plate 1047 : (h2).mjd 52443 (h2).raCen 220.4357 (h2).decCen 49.38516 (h2).haCen 34 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 220.436 49.385 220.436 50.885 plMakePlateFromTile : mjd of obs : 52443.672025 Observed HA/dec of plate center, fiducial point (deg) : 33.998 49.376 33.998 50.875 The rotation angle of the fid. point is -110.576439 plMakePlateFromTile : beginning loop over 1247 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (285.91, -141.06, 6.6) and (285.76, -141.18, 6.3) checkLTHo : distance = 0.181, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(285.91, -141.06, 6.6) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0803.par makePlates : plateInfo struct for plate 1048 : (h2).mjd 52443 (h2).raCen 223.1903 (h2).decCen 48.33617 (h2).haCen 31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 223.190 48.336 223.190 49.836 plMakePlateFromTile : mjd of obs : 52443.671340 Observed HA/dec of plate center, fiducial point (deg) : 30.998 48.327 30.998 49.826 The rotation angle of the fid. point is -112.382420 plMakePlateFromTile : beginning loop over 1231 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-110.17, 84.33, 6.6) and (-110.31, 84.22, 6.3) checkLTHo : distance = 0.180, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-110.17, 84.33, 6.6) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0804.par makePlates : plateInfo struct for plate 1049 : (h2).mjd 52443 (h2).raCen 225.6562 (h2).decCen 47.29846 (h2).haCen 29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 225.656 47.298 225.656 48.798 plMakePlateFromTile : mjd of obs : 52443.672628 Observed HA/dec of plate center, fiducial point (deg) : 28.998 47.289 28.998 48.789 The rotation angle of the fid. point is -113.008724 plMakePlateFromTile : beginning loop over 1233 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0805.par makePlates : plateInfo struct for plate 1050 : (h2).mjd 52443 (h2).raCen 228.3988 (h2).decCen 46.08047 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 228.399 46.080 228.399 47.580 plMakePlateFromTile : mjd of obs : 52443.671911 Observed HA/dec of plate center, fiducial point (deg) : 25.998 46.072 25.998 47.571 The rotation angle of the fid. point is -114.588609 plMakePlateFromTile : beginning loop over 1248 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0806.par makePlates : plateInfo struct for plate 1051 : (h2).mjd 52443 (h2).raCen 231.0839 (h2).decCen 44.73557 (h2).haCen 23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 231.084 44.736 231.084 46.236 plMakePlateFromTile : mjd of obs : 52443.671035 Observed HA/dec of plate center, fiducial point (deg) : 22.998 44.727 22.998 46.227 The rotation angle of the fid. point is -115.970270 plMakePlateFromTile : beginning loop over 1233 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0807.par makePlates : plateInfo struct for plate 1052 : (h2).mjd 52443 (h2).raCen 233.8291 (h2).decCen 43.17893 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 233.829 43.179 233.829 44.679 plMakePlateFromTile : mjd of obs : 52443.673097 Observed HA/dec of plate center, fiducial point (deg) : 20.998 43.171 20.998 44.671 The rotation angle of the fid. point is -115.265962 plMakePlateFromTile : beginning loop over 1203 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0808.par makePlates : plateInfo struct for plate 1053 : (h2).mjd 52443 (h2).raCen 236.4916 (h2).decCen 41.71439 (h2).haCen 33 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 236.492 41.714 236.492 43.214 plMakePlateFromTile : mjd of obs : 52443.713727 Observed HA/dec of plate center, fiducial point (deg) : 32.998 41.708 32.998 43.208 The rotation angle of the fid. point is -98.075794 plMakePlateFromTile : beginning loop over 1233 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0809.par makePlates : plateInfo struct for plate 1054 : (h2).mjd 52443 (h2).raCen 238.9777 (h2).decCen 40.12085 (h2).haCen 31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 238.978 40.121 238.978 41.621 plMakePlateFromTile : mjd of obs : 52443.715072 Observed HA/dec of plate center, fiducial point (deg) : 30.998 40.115 30.998 41.615 The rotation angle of the fid. point is -96.629405 plMakePlateFromTile : beginning loop over 1189 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0810.par makePlates : plateInfo struct for plate 1055 : (h2).mjd 52443 (h2).raCen 241.279 (h2).decCen 38.46155 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.279 38.462 241.279 39.962 plMakePlateFromTile : mjd of obs : 52443.713133 Observed HA/dec of plate center, fiducial point (deg) : 27.998 38.456 27.998 39.956 The rotation angle of the fid. point is -95.461733 plMakePlateFromTile : beginning loop over 1171 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0811.par makePlates : plateInfo struct for plate 1056 : (h2).mjd 52443 (h2).raCen 243.5008 (h2).decCen 36.74491 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.501 36.745 243.501 38.245 plMakePlateFromTile : mjd of obs : 52443.713746 Observed HA/dec of plate center, fiducial point (deg) : 25.998 36.740 25.998 38.240 The rotation angle of the fid. point is -92.827671 plMakePlateFromTile : beginning loop over 1158 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0812.par makePlates : plateInfo struct for plate 1057 : (h2).mjd 52443 (h2).raCen 245.5639 (h2).decCen 35.07248 (h2).haCen 39 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 245.564 35.072 245.564 36.572 plMakePlateFromTile : mjd of obs : 52443.755487 Observed HA/dec of plate center, fiducial point (deg) : 38.998 35.070 38.998 36.569 The rotation angle of the fid. point is -82.712057 plMakePlateFromTile : beginning loop over 1128 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk46/complete//plPlugMapT-0813.par makePlates : plateInfo struct for plate 1058 : (h2).mjd 52443 (h2).raCen 247.4395 (h2).decCen 33.44046 (h2).haCen 37 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13.3 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 247.440 33.440 247.440 34.940 plMakePlateFromTile : mjd of obs : 52443.755140 Observed HA/dec of plate center, fiducial point (deg) : 36.998 33.438 36.998 34.938 The rotation angle of the fid. point is -80.821024 plMakePlateFromTile : beginning loop over 1119 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Jun 17 13:19:07 CDT 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_11/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_125/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_125/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_9/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 21 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1038.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 119 2 15 90 3 18 94 4 16 119 5 7 131 6 6 82 7 5 70 8 13 97 9 6 98 10 20 149 11 10 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3130 0 4 53 32 plFiberPlate : adding spectro-photo std with objId = 3130 0 4 51 26 plFiberPlate : adding spectro-photo std with objId = 3103 0 1 177 6 plFiberPlate : adding spectro-photo std with objId = 3130 0 5 53 9 plFiberPlate : adding spectro-photo std with objId = 3130 0 1 40 22 plFiberPlate : adding spectro-photo std with objId = 3130 0 5 44 9 plFiberPlate : adding spectro-photo std with objId = 3103 0 3 175 19 plFiberPlate : adding spectro-photo std with objId = 3103 0 3 185 37 plFiberPlate : 127 possible sky positions to use as objects from a possible 593. plFiberPlate : 65 possible sky positions to use as objects from a possible 592. plFiberPlate : 26 possible sky positions to use as objects from a possible 591. plFiberPlate : 19 possible sky positions to use as objects from a possible 590. plFiberPlate : 34 possible sky positions to use as objects from a possible 589. plFiberPlate : 26 possible sky positions to use as objects from a possible 588. plFiberPlate : 47 possible sky positions to use as objects from a possible 587. plFiberPlate : 46 possible sky positions to use as objects from a possible 586. plFiberPlate : 56 possible sky positions to use as objects from a possible 585. plFiberPlate : 41 possible sky positions to use as objects from a possible 584. plFiberPlate : 25 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 5 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 25 possible sky positions to use as objects from a possible 579. plFiberPlate : 30 possible sky positions to use as objects from a possible 578. plFiberPlate : 62 possible sky positions to use as objects from a possible 577. plFiberPlate : 25 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 0 possible sky positions to use as objects from a possible 574. plFiberPlate: No sky found for bundle at -7.313 50.230, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 574. plFiberPlate : 5 possible sky positions to use as objects from a possible 573. plFiberPlate : 9 possible sky positions to use as objects from a possible 572. plFiberPlate : 4 possible sky positions to use as objects from a possible 571. plFiberPlate : 3 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 56 possible sky positions to use as objects from a possible 568. plFiberPlate : 36 possible sky positions to use as objects from a possible 567. plFiberPlate : 21 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 16 possible sky positions to use as objects from a possible 564. plFiberPlate : 17 possible sky positions to use as objects from a possible 563. plFiberPlate : 18 possible sky positions to use as objects from a possible 562. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1038.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1038.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1039.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 120 2 9 99 3 9 95 4 17 112 5 12 126 6 5 78 7 8 62 8 9 101 9 8 90 10 15 151 11 13 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3130 0 2 66 26 plFiberPlate : adding spectro-photo std with objId = 3103 0 2 203 26 plFiberPlate : adding spectro-photo std with objId = 3130 0 5 53 9 plFiberPlate : adding spectro-photo std with objId = 3103 0 6 199 25 plFiberPlate : adding spectro-photo std with objId = 3103 0 1 197 4 plFiberPlate : adding spectro-photo std with objId = 3103 0 4 199 37 plFiberPlate : adding spectro-photo std with objId = 3103 0 4 206 2 plFiberPlate : adding spectro-photo std with objId = 3130 0 4 67 71 plFiberPlate : 121 possible sky positions to use as objects from a possible 592. plFiberPlate : 82 possible sky positions to use as objects from a possible 591. plFiberPlate : 68 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 57 possible sky positions to use as objects from a possible 586. plFiberPlate : 88 possible sky positions to use as objects from a possible 585. plFiberPlate : 48 possible sky positions to use as objects from a possible 584. plFiberPlate : 28 possible sky positions to use as objects from a possible 583. plFiberPlate : 13 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 9 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 17 possible sky positions to use as objects from a possible 578. plFiberPlate : 11 possible sky positions to use as objects from a possible 577. plFiberPlate : 86 possible sky positions to use as objects from a possible 576. plFiberPlate : 47 possible sky positions to use as objects from a possible 575. plFiberPlate : 24 possible sky positions to use as objects from a possible 574. plFiberPlate : 10 possible sky positions to use as objects from a possible 573. plFiberPlate : 6 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : 19 possible sky positions to use as objects from a possible 569. plFiberPlate : 25 possible sky positions to use as objects from a possible 568. plFiberPlate : 41 possible sky positions to use as objects from a possible 567. plFiberPlate : 32 possible sky positions to use as objects from a possible 566. plFiberPlate : 9 possible sky positions to use as objects from a possible 565. plFiberPlate : 5 possible sky positions to use as objects from a possible 564. plFiberPlate : 1 possible sky positions to use as objects from a possible 563. plFiberPlate : 7 possible sky positions to use as objects from a possible 562. plFiberPlate : 11 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1038.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1039.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1039.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1040.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 140 2 8 88 3 16 59 4 13 98 5 8 126 6 3 88 7 4 66 8 8 104 9 5 125 10 19 133 11 9 124 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3130 0 1 70 46 plFiberPlate : adding spectro-photo std with objId = 3103 0 3 216 36 plFiberPlate : adding spectro-photo std with objId = 3103 0 6 206 18 plFiberPlate : adding spectro-photo std with objId = 3103 0 2 216 31 plFiberPlate : adding spectro-photo std with objId = 3130 0 5 69 23 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 11 48 plFiberPlate : adding spectro-photo std with objId = 3103 0 4 206 2 plFiberPlate : adding spectro-photo std with objId = 3130 0 4 67 71 plFiberPlate : 91 possible sky positions to use as objects from a possible 569. plFiberPlate : 58 possible sky positions to use as objects from a possible 568. plFiberPlate : 31 possible sky positions to use as objects from a possible 567. plFiberPlate : 20 possible sky positions to use as objects from a possible 566. plFiberPlate : 29 possible sky positions to use as objects from a possible 565. plFiberPlate : 22 possible sky positions to use as objects from a possible 564. plFiberPlate : 79 possible sky positions to use as objects from a possible 563. plFiberPlate : 73 possible sky positions to use as objects from a possible 562. plFiberPlate : 57 possible sky positions to use as objects from a possible 561. plFiberPlate : 35 possible sky positions to use as objects from a possible 560. plFiberPlate : 20 possible sky positions to use as objects from a possible 559. plFiberPlate : 9 possible sky positions to use as objects from a possible 558. plFiberPlate : 14 possible sky positions to use as objects from a possible 557. plFiberPlate : 20 possible sky positions to use as objects from a possible 556. plFiberPlate : 34 possible sky positions to use as objects from a possible 555. plFiberPlate : 38 possible sky positions to use as objects from a possible 554. plFiberPlate : 103 possible sky positions to use as objects from a possible 553. plFiberPlate : 79 possible sky positions to use as objects from a possible 552. plFiberPlate : 51 possible sky positions to use as objects from a possible 551. plFiberPlate : 35 possible sky positions to use as objects from a possible 550. plFiberPlate : 15 possible sky positions to use as objects from a possible 549. plFiberPlate : 22 possible sky positions to use as objects from a possible 548. plFiberPlate : 18 possible sky positions to use as objects from a possible 547. plFiberPlate : 16 possible sky positions to use as objects from a possible 546. plFiberPlate : 39 possible sky positions to use as objects from a possible 545. plFiberPlate : 59 possible sky positions to use as objects from a possible 544. plFiberPlate : 31 possible sky positions to use as objects from a possible 543. plFiberPlate : 22 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 12 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1039.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1040.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1040.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1041.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 129 2 10 77 3 10 65 4 9 123 5 9 139 6 9 70 7 6 51 8 10 99 9 7 89 10 15 143 11 12 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3103 0 5 225 17 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 22 33 plFiberPlate : adding spectro-photo std with objId = 3103 0 5 215 8 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 21 76 plFiberPlate : adding spectro-photo std with objId = 3103 0 4 231 14 plFiberPlate : adding spectro-photo std with objId = 3103 0 6 228 66 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 11 48 plFiberPlate : adding spectro-photo std with objId = 3180 0 6 18 2 plFiberPlate : 135 possible sky positions to use as objects from a possible 555. plFiberPlate : 65 possible sky positions to use as objects from a possible 554. plFiberPlate : 44 possible sky positions to use as objects from a possible 553. plFiberPlate : 23 possible sky positions to use as objects from a possible 552. plFiberPlate : 14 possible sky positions to use as objects from a possible 551. plFiberPlate : 53 possible sky positions to use as objects from a possible 550. plFiberPlate : 45 possible sky positions to use as objects from a possible 549. plFiberPlate : 119 possible sky positions to use as objects from a possible 548. plFiberPlate : 95 possible sky positions to use as objects from a possible 547. plFiberPlate : 67 possible sky positions to use as objects from a possible 546. plFiberPlate : 24 possible sky positions to use as objects from a possible 545. plFiberPlate : 9 possible sky positions to use as objects from a possible 544. plFiberPlate : 6 possible sky positions to use as objects from a possible 543. plFiberPlate : 23 possible sky positions to use as objects from a possible 542. plFiberPlate : 36 possible sky positions to use as objects from a possible 541. plFiberPlate : 33 possible sky positions to use as objects from a possible 540. plFiberPlate : 68 possible sky positions to use as objects from a possible 539. plFiberPlate : 51 possible sky positions to use as objects from a possible 538. plFiberPlate : 31 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 12 possible sky positions to use as objects from a possible 535. plFiberPlate : 4 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 9 possible sky positions to use as objects from a possible 532. plFiberPlate : 14 possible sky positions to use as objects from a possible 531. plFiberPlate : 47 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 2 possible sky positions to use as objects from a possible 528. plFiberPlate : 10 possible sky positions to use as objects from a possible 527. plFiberPlate : 5 possible sky positions to use as objects from a possible 526. plFiberPlate : 4 possible sky positions to use as objects from a possible 525. plFiberPlate : 13 possible sky positions to use as objects from a possible 524. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1040.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1041.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1041.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1042.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 136 2 10 102 3 9 87 4 11 112 5 13 129 6 7 82 7 7 43 8 6 86 9 10 96 10 22 162 11 17 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 35 52 plFiberPlate : adding spectro-photo std with objId = 3180 0 1 27 21 plFiberPlate : adding spectro-photo std with objId = 3103 0 4 241 4 plFiberPlate : adding spectro-photo std with objId = 3103 0 6 237 30 plFiberPlate : adding spectro-photo std with objId = 3103 0 5 240 31 plFiberPlate : adding spectro-photo std with objId = 3180 0 6 29 2 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 26 6 plFiberPlate : adding spectro-photo std with objId = 3180 0 5 25 23 plFiberPlate : 120 possible sky positions to use as objects from a possible 558. plFiberPlate : 44 possible sky positions to use as objects from a possible 557. plFiberPlate : 17 possible sky positions to use as objects from a possible 556. plFiberPlate : 31 possible sky positions to use as objects from a possible 555. plFiberPlate : 14 possible sky positions to use as objects from a possible 554. plFiberPlate : 37 possible sky positions to use as objects from a possible 553. plFiberPlate : 60 possible sky positions to use as objects from a possible 552. plFiberPlate : 72 possible sky positions to use as objects from a possible 551. plFiberPlate : 47 possible sky positions to use as objects from a possible 550. plFiberPlate : 42 possible sky positions to use as objects from a possible 549. plFiberPlate : 18 possible sky positions to use as objects from a possible 548. plFiberPlate : 6 possible sky positions to use as objects from a possible 547. plFiberPlate : 5 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 34 possible sky positions to use as objects from a possible 544. plFiberPlate : 41 possible sky positions to use as objects from a possible 543. plFiberPlate : 69 possible sky positions to use as objects from a possible 542. plFiberPlate : 43 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 12 possible sky positions to use as objects from a possible 539. plFiberPlate : 4 possible sky positions to use as objects from a possible 538. plFiberPlate : 15 possible sky positions to use as objects from a possible 537. plFiberPlate : 16 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 55 possible sky positions to use as objects from a possible 533. plFiberPlate : 36 possible sky positions to use as objects from a possible 532. plFiberPlate : 18 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 5 possible sky positions to use as objects from a possible 529. plFiberPlate : 3 possible sky positions to use as objects from a possible 528. plFiberPlate : 4 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1041.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1042.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1042.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1043.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 107 2 11 72 3 10 55 4 8 105 5 7 121 6 5 79 7 3 64 8 3 90 9 6 113 10 15 150 11 15 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 40 15 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 35 52 plFiberPlate : adding spectro-photo std with objId = 3103 0 5 252 17 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 47 72 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 32 2 plFiberPlate : adding spectro-photo std with objId = 3103 0 4 241 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 1 48 33 plFiberPlate : adding spectro-photo std with objId = 3103 0 5 240 31 plFiberPlate : 110 possible sky positions to use as objects from a possible 537. plFiberPlate : 75 possible sky positions to use as objects from a possible 536. plFiberPlate : 40 possible sky positions to use as objects from a possible 535. plFiberPlate : 31 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 26 possible sky positions to use as objects from a possible 532. plFiberPlate : 36 possible sky positions to use as objects from a possible 531. plFiberPlate : 83 possible sky positions to use as objects from a possible 530. plFiberPlate : 67 possible sky positions to use as objects from a possible 529. plFiberPlate : 37 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 18 possible sky positions to use as objects from a possible 525. plFiberPlate : 17 possible sky positions to use as objects from a possible 524. plFiberPlate : 5 possible sky positions to use as objects from a possible 523. plFiberPlate : 21 possible sky positions to use as objects from a possible 522. plFiberPlate : 74 possible sky positions to use as objects from a possible 521. plFiberPlate : 51 possible sky positions to use as objects from a possible 520. plFiberPlate : 28 possible sky positions to use as objects from a possible 519. plFiberPlate : 20 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 13 possible sky positions to use as objects from a possible 513. plFiberPlate : 26 possible sky positions to use as objects from a possible 512. plFiberPlate : 23 possible sky positions to use as objects from a possible 511. plFiberPlate : 18 possible sky positions to use as objects from a possible 510. plFiberPlate : 16 possible sky positions to use as objects from a possible 509. plFiberPlate : 6 possible sky positions to use as objects from a possible 508. plFiberPlate : 5 possible sky positions to use as objects from a possible 507. plFiberPlate : 14 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1042.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1043.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1043.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1044.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 133 2 8 89 3 9 65 4 18 111 5 12 118 6 8 84 7 8 48 8 5 84 9 7 104 10 22 157 11 15 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3103 0 6 254 2 plFiberPlate : adding spectro-photo std with objId = 3103 0 5 252 17 plFiberPlate : adding spectro-photo std with objId = 3103 0 5 258 15 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 51 23 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 51 2 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 59 6 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 50 29 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 63 23 plFiberPlate : 77 possible sky positions to use as objects from a possible 542. plFiberPlate : 80 possible sky positions to use as objects from a possible 541. plFiberPlate : 31 possible sky positions to use as objects from a possible 540. plFiberPlate : 19 possible sky positions to use as objects from a possible 539. plFiberPlate : 35 possible sky positions to use as objects from a possible 538. plFiberPlate : 37 possible sky positions to use as objects from a possible 537. plFiberPlate : 59 possible sky positions to use as objects from a possible 536. plFiberPlate : 94 possible sky positions to use as objects from a possible 535. plFiberPlate : 46 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 19 possible sky positions to use as objects from a possible 532. plFiberPlate : 10 possible sky positions to use as objects from a possible 531. plFiberPlate : 15 possible sky positions to use as objects from a possible 530. plFiberPlate : 10 possible sky positions to use as objects from a possible 529. plFiberPlate : 14 possible sky positions to use as objects from a possible 528. plFiberPlate : 46 possible sky positions to use as objects from a possible 527. plFiberPlate : 54 possible sky positions to use as objects from a possible 526. plFiberPlate : 39 possible sky positions to use as objects from a possible 525. plFiberPlate : 29 possible sky positions to use as objects from a possible 524. plFiberPlate : 15 possible sky positions to use as objects from a possible 523. plFiberPlate : 8 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 2 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 56 possible sky positions to use as objects from a possible 517. plFiberPlate : 44 possible sky positions to use as objects from a possible 516. plFiberPlate : 31 possible sky positions to use as objects from a possible 515. plFiberPlate : 19 possible sky positions to use as objects from a possible 514. plFiberPlate : 6 possible sky positions to use as objects from a possible 513. plFiberPlate : 8 possible sky positions to use as objects from a possible 512. plFiberPlate : 6 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1043.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1044.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1044.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1045.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 127 2 10 80 3 6 67 4 9 102 5 11 140 6 7 80 7 4 52 8 9 78 9 6 102 10 15 142 11 15 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 75 12 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 75 2 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 61 17 plFiberPlate : adding spectro-photo std with objId = 3180 0 6 77 27 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 71 15 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 74 12 plFiberPlate : adding spectro-photo std with objId = 3180 0 6 75 31 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 63 23 plFiberPlate : 100 possible sky positions to use as objects from a possible 546. plFiberPlate : 45 possible sky positions to use as objects from a possible 545. plFiberPlate : 36 possible sky positions to use as objects from a possible 544. plFiberPlate : 10 possible sky positions to use as objects from a possible 543. plFiberPlate : 23 possible sky positions to use as objects from a possible 542. plFiberPlate : 31 possible sky positions to use as objects from a possible 541. plFiberPlate : 49 possible sky positions to use as objects from a possible 540. plFiberPlate : 84 possible sky positions to use as objects from a possible 539. plFiberPlate : 61 possible sky positions to use as objects from a possible 538. plFiberPlate : 54 possible sky positions to use as objects from a possible 537. plFiberPlate : 32 possible sky positions to use as objects from a possible 536. plFiberPlate : 22 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 13 possible sky positions to use as objects from a possible 533. plFiberPlate : 18 possible sky positions to use as objects from a possible 532. plFiberPlate : 27 possible sky positions to use as objects from a possible 531. plFiberPlate : 86 possible sky positions to use as objects from a possible 530. plFiberPlate : 49 possible sky positions to use as objects from a possible 529. plFiberPlate : 25 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 16 possible sky positions to use as objects from a possible 526. plFiberPlate : 12 possible sky positions to use as objects from a possible 525. plFiberPlate : 7 possible sky positions to use as objects from a possible 524. plFiberPlate : 13 possible sky positions to use as objects from a possible 523. plFiberPlate : 14 possible sky positions to use as objects from a possible 522. plFiberPlate : 59 possible sky positions to use as objects from a possible 521. plFiberPlate : 31 possible sky positions to use as objects from a possible 520. plFiberPlate : 21 possible sky positions to use as objects from a possible 519. plFiberPlate : 19 possible sky positions to use as objects from a possible 518. plFiberPlate : 17 possible sky positions to use as objects from a possible 517. plFiberPlate : 5 possible sky positions to use as objects from a possible 516. plFiberPlate : 21 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1044.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1045.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1045.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1046.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 110 2 5 75 3 4 46 4 9 73 5 18 134 6 17 92 7 13 61 8 12 96 9 12 109 10 11 131 11 9 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 84 21 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 84 23 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 86 21 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 90 2 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 89 39 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 74 12 plFiberPlate : adding spectro-photo std with objId = 3180 0 6 81 38 plFiberPlate : adding spectro-photo std with objId = 3180 0 6 81 10 plFiberPlate : 65 possible sky positions to use as objects from a possible 518. plFiberPlate : 40 possible sky positions to use as objects from a possible 517. plFiberPlate : 19 possible sky positions to use as objects from a possible 516. plFiberPlate : 14 possible sky positions to use as objects from a possible 515. plFiberPlate : 11 possible sky positions to use as objects from a possible 514. plFiberPlate : 26 possible sky positions to use as objects from a possible 513. plFiberPlate : 32 possible sky positions to use as objects from a possible 512. plFiberPlate : 65 possible sky positions to use as objects from a possible 511. plFiberPlate : 55 possible sky positions to use as objects from a possible 510. plFiberPlate : 34 possible sky positions to use as objects from a possible 509. plFiberPlate : 15 possible sky positions to use as objects from a possible 508. plFiberPlate : 7 possible sky positions to use as objects from a possible 507. plFiberPlate : 8 possible sky positions to use as objects from a possible 506. plFiberPlate : 12 possible sky positions to use as objects from a possible 505. plFiberPlate : 19 possible sky positions to use as objects from a possible 504. plFiberPlate : 31 possible sky positions to use as objects from a possible 503. plFiberPlate : 65 possible sky positions to use as objects from a possible 502. plFiberPlate : 60 possible sky positions to use as objects from a possible 501. plFiberPlate : 23 possible sky positions to use as objects from a possible 500. plFiberPlate : 17 possible sky positions to use as objects from a possible 499. plFiberPlate : 11 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 5 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 18 possible sky positions to use as objects from a possible 494. plFiberPlate : 79 possible sky positions to use as objects from a possible 493. plFiberPlate : 37 possible sky positions to use as objects from a possible 492. plFiberPlate : 17 possible sky positions to use as objects from a possible 491. plFiberPlate : 5 possible sky positions to use as objects from a possible 490. plFiberPlate : 13 possible sky positions to use as objects from a possible 489. plFiberPlate : 11 possible sky positions to use as objects from a possible 488. plFiberPlate : 15 possible sky positions to use as objects from a possible 487. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1045.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1046.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1046.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1047.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 125 2 7 86 3 9 53 4 8 81 5 14 127 6 7 77 7 9 42 8 4 81 9 12 104 10 20 142 11 10 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 102 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 102 16 plFiberPlate : adding spectro-photo std with objId = 3180 0 6 102 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 96 41 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 100 49 plFiberPlate : adding spectro-photo std with objId = 3180 0 5 96 37 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 97 9 plFiberPlate : adding spectro-photo std with objId = 3177 0 6 101 13 plFiberPlate : 91 possible sky positions to use as objects from a possible 518. plFiberPlate : 60 possible sky positions to use as objects from a possible 517. plFiberPlate : 44 possible sky positions to use as objects from a possible 516. plFiberPlate : 29 possible sky positions to use as objects from a possible 515. plFiberPlate : 16 possible sky positions to use as objects from a possible 514. plFiberPlate : 37 possible sky positions to use as objects from a possible 513. plFiberPlate : 54 possible sky positions to use as objects from a possible 512. plFiberPlate : 78 possible sky positions to use as objects from a possible 511. plFiberPlate : 64 possible sky positions to use as objects from a possible 510. plFiberPlate : 52 possible sky positions to use as objects from a possible 509. plFiberPlate : 41 possible sky positions to use as objects from a possible 508. plFiberPlate : 24 possible sky positions to use as objects from a possible 507. plFiberPlate : 21 possible sky positions to use as objects from a possible 506. plFiberPlate : 17 possible sky positions to use as objects from a possible 505. plFiberPlate : 17 possible sky positions to use as objects from a possible 504. plFiberPlate : 26 possible sky positions to use as objects from a possible 503. plFiberPlate : 70 possible sky positions to use as objects from a possible 502. plFiberPlate : 55 possible sky positions to use as objects from a possible 501. plFiberPlate : 31 possible sky positions to use as objects from a possible 500. plFiberPlate : 15 possible sky positions to use as objects from a possible 499. plFiberPlate : 25 possible sky positions to use as objects from a possible 498. plFiberPlate : 10 possible sky positions to use as objects from a possible 497. plFiberPlate : 14 possible sky positions to use as objects from a possible 496. plFiberPlate : 14 possible sky positions to use as objects from a possible 495. plFiberPlate : 14 possible sky positions to use as objects from a possible 494. plFiberPlate : 55 possible sky positions to use as objects from a possible 493. plFiberPlate : 62 possible sky positions to use as objects from a possible 492. plFiberPlate : 32 possible sky positions to use as objects from a possible 491. plFiberPlate : 16 possible sky positions to use as objects from a possible 490. plFiberPlate : 14 possible sky positions to use as objects from a possible 489. plFiberPlate : 12 possible sky positions to use as objects from a possible 488. plFiberPlate : 11 possible sky positions to use as objects from a possible 487. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1046.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1047.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1047.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1048.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 114 2 10 79 3 13 50 4 11 85 5 9 134 6 8 84 7 5 41 8 8 85 9 8 97 10 23 137 11 15 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 102 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 98 49 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 104 54 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 122 16 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 112 33 plFiberPlate : adding spectro-photo std with objId = 3180 0 1 107 2 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 108 33 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 122 44 plFiberPlate : 69 possible sky positions to use as objects from a possible 501. plFiberPlate : 46 possible sky positions to use as objects from a possible 500. plFiberPlate : 22 possible sky positions to use as objects from a possible 499. plFiberPlate : 27 possible sky positions to use as objects from a possible 498. plFiberPlate : 37 possible sky positions to use as objects from a possible 497. plFiberPlate : 17 possible sky positions to use as objects from a possible 496. plFiberPlate : 23 possible sky positions to use as objects from a possible 495. plFiberPlate : 75 possible sky positions to use as objects from a possible 494. plFiberPlate : 67 possible sky positions to use as objects from a possible 493. plFiberPlate : 46 possible sky positions to use as objects from a possible 492. plFiberPlate : 34 possible sky positions to use as objects from a possible 491. plFiberPlate : 22 possible sky positions to use as objects from a possible 490. plFiberPlate : 7 possible sky positions to use as objects from a possible 489. plFiberPlate : 28 possible sky positions to use as objects from a possible 488. plFiberPlate : 29 possible sky positions to use as objects from a possible 487. plFiberPlate : 13 possible sky positions to use as objects from a possible 486. plFiberPlate : 56 possible sky positions to use as objects from a possible 485. plFiberPlate : 55 possible sky positions to use as objects from a possible 484. plFiberPlate : 17 possible sky positions to use as objects from a possible 483. plFiberPlate : 10 possible sky positions to use as objects from a possible 482. plFiberPlate : 6 possible sky positions to use as objects from a possible 481. plFiberPlate : 14 possible sky positions to use as objects from a possible 480. plFiberPlate : 18 possible sky positions to use as objects from a possible 479. plFiberPlate : 7 possible sky positions to use as objects from a possible 478. plFiberPlate : 13 possible sky positions to use as objects from a possible 477. plFiberPlate : 50 possible sky positions to use as objects from a possible 476. plFiberPlate : 39 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 7 possible sky positions to use as objects from a possible 473. plFiberPlate : 9 possible sky positions to use as objects from a possible 472. plFiberPlate : 6 possible sky positions to use as objects from a possible 471. plFiberPlate : 10 possible sky positions to use as objects from a possible 470. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1047.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1048.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1048.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1049.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 122 2 11 83 3 8 46 4 14 70 5 15 101 6 11 90 7 7 63 8 11 88 9 17 111 10 22 130 11 17 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 116 40 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 117 54 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 131 6 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 123 15 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 113 22 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 133 40 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 122 44 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 123 19 plFiberPlate : 66 possible sky positions to use as objects from a possible 497. plFiberPlate : 25 possible sky positions to use as objects from a possible 496. plFiberPlate : 31 possible sky positions to use as objects from a possible 495. plFiberPlate : 21 possible sky positions to use as objects from a possible 494. plFiberPlate : 34 possible sky positions to use as objects from a possible 493. plFiberPlate : 32 possible sky positions to use as objects from a possible 492. plFiberPlate : 23 possible sky positions to use as objects from a possible 491. plFiberPlate : 48 possible sky positions to use as objects from a possible 490. plFiberPlate : 34 possible sky positions to use as objects from a possible 489. plFiberPlate : 19 possible sky positions to use as objects from a possible 488. plFiberPlate : 12 possible sky positions to use as objects from a possible 487. plFiberPlate : 8 possible sky positions to use as objects from a possible 486. plFiberPlate : 10 possible sky positions to use as objects from a possible 485. plFiberPlate : 11 possible sky positions to use as objects from a possible 484. plFiberPlate : 16 possible sky positions to use as objects from a possible 483. plFiberPlate : 32 possible sky positions to use as objects from a possible 482. plFiberPlate : 33 possible sky positions to use as objects from a possible 481. plFiberPlate : 40 possible sky positions to use as objects from a possible 480. plFiberPlate : 26 possible sky positions to use as objects from a possible 479. plFiberPlate : 21 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : 14 possible sky positions to use as objects from a possible 475. plFiberPlate : 3 possible sky positions to use as objects from a possible 474. plFiberPlate : 23 possible sky positions to use as objects from a possible 473. plFiberPlate : 65 possible sky positions to use as objects from a possible 472. plFiberPlate : 48 possible sky positions to use as objects from a possible 471. plFiberPlate : 40 possible sky positions to use as objects from a possible 470. plFiberPlate : 27 possible sky positions to use as objects from a possible 469. plFiberPlate : 20 possible sky positions to use as objects from a possible 468. plFiberPlate : 14 possible sky positions to use as objects from a possible 467. plFiberPlate : 21 possible sky positions to use as objects from a possible 466. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1048.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1049.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1049.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1050.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 113 2 15 90 3 6 64 4 7 84 5 7 120 6 10 85 7 6 48 8 9 70 9 16 101 10 16 145 11 15 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 148 42 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 130 26 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 137 47 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 141 33 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 140 13 plFiberPlate : adding spectro-photo std with objId = 3177 0 6 133 34 plFiberPlate : adding spectro-photo std with objId = 3180 0 1 135 43 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 130 58 plFiberPlate : 77 possible sky positions to use as objects from a possible 506. plFiberPlate : 45 possible sky positions to use as objects from a possible 505. plFiberPlate : 13 possible sky positions to use as objects from a possible 504. plFiberPlate : 13 possible sky positions to use as objects from a possible 503. plFiberPlate : 21 possible sky positions to use as objects from a possible 502. plFiberPlate : 21 possible sky positions to use as objects from a possible 501. plFiberPlate : 30 possible sky positions to use as objects from a possible 500. plFiberPlate : 68 possible sky positions to use as objects from a possible 499. plFiberPlate : 53 possible sky positions to use as objects from a possible 498. plFiberPlate : 37 possible sky positions to use as objects from a possible 497. plFiberPlate : 21 possible sky positions to use as objects from a possible 496. plFiberPlate : 5 possible sky positions to use as objects from a possible 495. plFiberPlate : 7 possible sky positions to use as objects from a possible 494. plFiberPlate : 21 possible sky positions to use as objects from a possible 493. plFiberPlate : 15 possible sky positions to use as objects from a possible 492. plFiberPlate : 10 possible sky positions to use as objects from a possible 491. plFiberPlate : 60 possible sky positions to use as objects from a possible 490. plFiberPlate : 41 possible sky positions to use as objects from a possible 489. plFiberPlate : 24 possible sky positions to use as objects from a possible 488. plFiberPlate : 18 possible sky positions to use as objects from a possible 487. plFiberPlate : 9 possible sky positions to use as objects from a possible 486. plFiberPlate : 17 possible sky positions to use as objects from a possible 485. plFiberPlate : 19 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 6 possible sky positions to use as objects from a possible 482. plFiberPlate : 57 possible sky positions to use as objects from a possible 481. plFiberPlate : 67 possible sky positions to use as objects from a possible 480. plFiberPlate : 45 possible sky positions to use as objects from a possible 479. plFiberPlate : 20 possible sky positions to use as objects from a possible 478. plFiberPlate : 10 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : 20 possible sky positions to use as objects from a possible 475. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1049.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1050.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1050.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1051.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 113 2 11 82 3 3 56 4 9 81 5 17 121 6 10 89 7 6 37 8 11 61 9 14 86 10 16 143 11 13 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 160 17 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 158 22 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 160 26 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 151 32 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 151 30 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 154 26 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 157 31 plFiberPlate : adding spectro-photo std with objId = 3177 0 6 146 9 plFiberPlate : 77 possible sky positions to use as objects from a possible 486. plFiberPlate : 32 possible sky positions to use as objects from a possible 485. plFiberPlate : 21 possible sky positions to use as objects from a possible 484. plFiberPlate : 22 possible sky positions to use as objects from a possible 483. plFiberPlate : 24 possible sky positions to use as objects from a possible 482. plFiberPlate : 27 possible sky positions to use as objects from a possible 481. plFiberPlate : 47 possible sky positions to use as objects from a possible 480. plFiberPlate : 66 possible sky positions to use as objects from a possible 479. plFiberPlate : 49 possible sky positions to use as objects from a possible 478. plFiberPlate : 35 possible sky positions to use as objects from a possible 477. plFiberPlate : 20 possible sky positions to use as objects from a possible 476. plFiberPlate : 21 possible sky positions to use as objects from a possible 475. plFiberPlate : 11 possible sky positions to use as objects from a possible 474. plFiberPlate : 11 possible sky positions to use as objects from a possible 473. plFiberPlate : 13 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 65 possible sky positions to use as objects from a possible 470. plFiberPlate : 41 possible sky positions to use as objects from a possible 469. plFiberPlate : 22 possible sky positions to use as objects from a possible 468. plFiberPlate : 16 possible sky positions to use as objects from a possible 467. plFiberPlate : 13 possible sky positions to use as objects from a possible 466. plFiberPlate : 16 possible sky positions to use as objects from a possible 465. plFiberPlate : 10 possible sky positions to use as objects from a possible 464. plFiberPlate : 21 possible sky positions to use as objects from a possible 463. plFiberPlate : 13 possible sky positions to use as objects from a possible 462. plFiberPlate : 67 possible sky positions to use as objects from a possible 461. plFiberPlate : 57 possible sky positions to use as objects from a possible 460. plFiberPlate : 31 possible sky positions to use as objects from a possible 459. plFiberPlate : 17 possible sky positions to use as objects from a possible 458. plFiberPlate : 3 possible sky positions to use as objects from a possible 457. plFiberPlate : 8 possible sky positions to use as objects from a possible 456. plFiberPlate : 8 possible sky positions to use as objects from a possible 455. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1050.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1051.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1051.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1052.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 115 2 17 81 3 12 36 4 9 45 5 15 108 6 8 89 7 9 46 8 10 60 9 14 99 10 25 124 11 17 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 169 69 plFiberPlate : adding spectro-photo std with objId = 3180 0 5 170 25 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 168 28 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 171 30 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 180 29 plFiberPlate : adding spectro-photo std with objId = 3180 0 1 171 22 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 174 37 plFiberPlate : adding spectro-photo std with objId = 3177 0 6 164 30 plFiberPlate : 65 possible sky positions to use as objects from a possible 445. plFiberPlate : 36 possible sky positions to use as objects from a possible 444. plFiberPlate : 14 possible sky positions to use as objects from a possible 443. plFiberPlate : 23 possible sky positions to use as objects from a possible 442. plFiberPlate : 24 possible sky positions to use as objects from a possible 441. plFiberPlate : 28 possible sky positions to use as objects from a possible 440. plFiberPlate : 22 possible sky positions to use as objects from a possible 439. plFiberPlate : 44 possible sky positions to use as objects from a possible 438. plFiberPlate : 40 possible sky positions to use as objects from a possible 437. plFiberPlate : 43 possible sky positions to use as objects from a possible 436. plFiberPlate : 30 possible sky positions to use as objects from a possible 435. plFiberPlate : 19 possible sky positions to use as objects from a possible 434. plFiberPlate : 9 possible sky positions to use as objects from a possible 433. plFiberPlate : 13 possible sky positions to use as objects from a possible 432. plFiberPlate : 31 possible sky positions to use as objects from a possible 431. plFiberPlate : 8 possible sky positions to use as objects from a possible 430. plFiberPlate : 56 possible sky positions to use as objects from a possible 429. plFiberPlate : 33 possible sky positions to use as objects from a possible 428. plFiberPlate : 24 possible sky positions to use as objects from a possible 427. plFiberPlate : 19 possible sky positions to use as objects from a possible 426. plFiberPlate : 9 possible sky positions to use as objects from a possible 425. plFiberPlate : 4 possible sky positions to use as objects from a possible 424. plFiberPlate : 6 possible sky positions to use as objects from a possible 423. plFiberPlate : 9 possible sky positions to use as objects from a possible 422. plFiberPlate : 18 possible sky positions to use as objects from a possible 421. plFiberPlate : 46 possible sky positions to use as objects from a possible 420. plFiberPlate : 55 possible sky positions to use as objects from a possible 419. plFiberPlate : 45 possible sky positions to use as objects from a possible 418. plFiberPlate : 32 possible sky positions to use as objects from a possible 417. plFiberPlate : 20 possible sky positions to use as objects from a possible 416. plFiberPlate : 12 possible sky positions to use as objects from a possible 415. plFiberPlate : 14 possible sky positions to use as objects from a possible 414. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1051.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1052.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1052.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1053.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 118 2 18 82 3 8 46 4 11 64 5 24 105 6 19 69 7 9 34 8 10 56 9 18 88 10 26 136 11 22 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 194 48 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 189 31 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 197 60 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 184 59 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 183 33 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 182 66 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 186 47 plFiberPlate : adding spectro-photo std with objId = 3180 0 5 181 53 plFiberPlate : 67 possible sky positions to use as objects from a possible 441. plFiberPlate : 35 possible sky positions to use as objects from a possible 440. plFiberPlate : 31 possible sky positions to use as objects from a possible 439. plFiberPlate : 28 possible sky positions to use as objects from a possible 438. plFiberPlate : 20 possible sky positions to use as objects from a possible 437. plFiberPlate : 15 possible sky positions to use as objects from a possible 436. plFiberPlate : 41 possible sky positions to use as objects from a possible 435. plFiberPlate : 48 possible sky positions to use as objects from a possible 434. plFiberPlate : 38 possible sky positions to use as objects from a possible 433. plFiberPlate : 29 possible sky positions to use as objects from a possible 432. plFiberPlate : 13 possible sky positions to use as objects from a possible 431. plFiberPlate : 14 possible sky positions to use as objects from a possible 430. plFiberPlate : 15 possible sky positions to use as objects from a possible 429. plFiberPlate : 14 possible sky positions to use as objects from a possible 428. plFiberPlate : 10 possible sky positions to use as objects from a possible 427. plFiberPlate : 11 possible sky positions to use as objects from a possible 426. plFiberPlate : 44 possible sky positions to use as objects from a possible 425. plFiberPlate : 23 possible sky positions to use as objects from a possible 424. plFiberPlate : 24 possible sky positions to use as objects from a possible 423. plFiberPlate : 17 possible sky positions to use as objects from a possible 422. plFiberPlate : 13 possible sky positions to use as objects from a possible 421. plFiberPlate : 12 possible sky positions to use as objects from a possible 420. plFiberPlate : 9 possible sky positions to use as objects from a possible 419. plFiberPlate : 9 possible sky positions to use as objects from a possible 418. plFiberPlate : 17 possible sky positions to use as objects from a possible 417. plFiberPlate : 56 possible sky positions to use as objects from a possible 416. plFiberPlate : 39 possible sky positions to use as objects from a possible 415. plFiberPlate : 29 possible sky positions to use as objects from a possible 414. plFiberPlate : 22 possible sky positions to use as objects from a possible 413. plFiberPlate : 15 possible sky positions to use as objects from a possible 412. plFiberPlate : 14 possible sky positions to use as objects from a possible 411. plFiberPlate : 22 possible sky positions to use as objects from a possible 410. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1052.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1053.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1053.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1054.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 103 2 15 93 3 8 49 4 13 66 5 15 131 6 9 89 7 4 28 8 5 38 9 15 96 10 26 128 11 17 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 6 205 76 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 213 43 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 200 21 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 210 37 plFiberPlate : adding spectro-photo std with objId = 3177 0 6 198 48 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 204 140 plFiberPlate : adding spectro-photo std with objId = 3180 0 3 197 60 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 200 44 plFiberPlate : 72 possible sky positions to use as objects from a possible 438. plFiberPlate : 47 possible sky positions to use as objects from a possible 437. plFiberPlate : 12 possible sky positions to use as objects from a possible 436. plFiberPlate : 11 possible sky positions to use as objects from a possible 435. plFiberPlate : 13 possible sky positions to use as objects from a possible 434. plFiberPlate : 41 possible sky positions to use as objects from a possible 433. plFiberPlate : 39 possible sky positions to use as objects from a possible 432. plFiberPlate : 45 possible sky positions to use as objects from a possible 431. plFiberPlate : 28 possible sky positions to use as objects from a possible 430. plFiberPlate : 11 possible sky positions to use as objects from a possible 429. plFiberPlate : 5 possible sky positions to use as objects from a possible 428. plFiberPlate : 2 possible sky positions to use as objects from a possible 427. plFiberPlate : 3 possible sky positions to use as objects from a possible 426. plFiberPlate : 6 possible sky positions to use as objects from a possible 425. plFiberPlate : 14 possible sky positions to use as objects from a possible 424. plFiberPlate : 7 possible sky positions to use as objects from a possible 423. plFiberPlate : 58 possible sky positions to use as objects from a possible 422. plFiberPlate : 39 possible sky positions to use as objects from a possible 421. plFiberPlate : 37 possible sky positions to use as objects from a possible 420. plFiberPlate : 21 possible sky positions to use as objects from a possible 419. plFiberPlate : 15 possible sky positions to use as objects from a possible 418. plFiberPlate : 12 possible sky positions to use as objects from a possible 417. plFiberPlate : 11 possible sky positions to use as objects from a possible 416. plFiberPlate : 9 possible sky positions to use as objects from a possible 415. plFiberPlate : 6 possible sky positions to use as objects from a possible 414. plFiberPlate : 72 possible sky positions to use as objects from a possible 413. plFiberPlate : 38 possible sky positions to use as objects from a possible 412. plFiberPlate : 23 possible sky positions to use as objects from a possible 411. plFiberPlate : 9 possible sky positions to use as objects from a possible 410. plFiberPlate : 6 possible sky positions to use as objects from a possible 409. plFiberPlate : 14 possible sky positions to use as objects from a possible 408. plFiberPlate : 4 possible sky positions to use as objects from a possible 407. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1053.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1054.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1054.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1055.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 98 2 17 68 3 6 31 4 7 43 5 21 133 6 12 89 7 5 30 8 7 38 9 14 91 10 23 107 11 21 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 223 20 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 225 64 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 208 23 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 210 37 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 222 61 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 211 59 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 219 51 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 224 37 plFiberPlate : 41 possible sky positions to use as objects from a possible 416. plFiberPlate : 20 possible sky positions to use as objects from a possible 415. plFiberPlate : 10 possible sky positions to use as objects from a possible 414. plFiberPlate : 20 possible sky positions to use as objects from a possible 413. plFiberPlate : 15 possible sky positions to use as objects from a possible 412. plFiberPlate : 17 possible sky positions to use as objects from a possible 411. plFiberPlate : 35 possible sky positions to use as objects from a possible 410. plFiberPlate : 46 possible sky positions to use as objects from a possible 409. plFiberPlate : 33 possible sky positions to use as objects from a possible 408. plFiberPlate : 20 possible sky positions to use as objects from a possible 407. plFiberPlate : 11 possible sky positions to use as objects from a possible 406. plFiberPlate : 11 possible sky positions to use as objects from a possible 405. plFiberPlate : 12 possible sky positions to use as objects from a possible 404. plFiberPlate : 8 possible sky positions to use as objects from a possible 403. plFiberPlate : 10 possible sky positions to use as objects from a possible 402. plFiberPlate : 18 possible sky positions to use as objects from a possible 401. plFiberPlate : 60 possible sky positions to use as objects from a possible 400. plFiberPlate : 48 possible sky positions to use as objects from a possible 399. plFiberPlate : 27 possible sky positions to use as objects from a possible 398. plFiberPlate : 22 possible sky positions to use as objects from a possible 397. plFiberPlate : 14 possible sky positions to use as objects from a possible 396. plFiberPlate : 14 possible sky positions to use as objects from a possible 395. plFiberPlate : 8 possible sky positions to use as objects from a possible 394. plFiberPlate : 13 possible sky positions to use as objects from a possible 393. plFiberPlate : 8 possible sky positions to use as objects from a possible 392. plFiberPlate : 76 possible sky positions to use as objects from a possible 391. plFiberPlate : 55 possible sky positions to use as objects from a possible 390. plFiberPlate : 39 possible sky positions to use as objects from a possible 389. plFiberPlate : 16 possible sky positions to use as objects from a possible 388. plFiberPlate : 9 possible sky positions to use as objects from a possible 387. plFiberPlate : 11 possible sky positions to use as objects from a possible 386. plFiberPlate : 6 possible sky positions to use as objects from a possible 385. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1054.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1055.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1055.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1056.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 110 2 20 82 3 8 33 4 11 39 5 17 108 6 14 88 7 5 34 8 7 42 9 10 102 10 23 115 11 23 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 245 25 plFiberPlate : adding spectro-photo std with objId = 3177 0 2 241 64 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 231 66 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 232 48 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 235 17 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 225 64 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 224 37 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 240 55 plFiberPlate : 51 possible sky positions to use as objects from a possible 406. plFiberPlate : 25 possible sky positions to use as objects from a possible 405. plFiberPlate : 29 possible sky positions to use as objects from a possible 404. plFiberPlate : 8 possible sky positions to use as objects from a possible 403. plFiberPlate : 24 possible sky positions to use as objects from a possible 402. plFiberPlate : 26 possible sky positions to use as objects from a possible 401. plFiberPlate : 37 possible sky positions to use as objects from a possible 400. plFiberPlate : 42 possible sky positions to use as objects from a possible 399. plFiberPlate : 37 possible sky positions to use as objects from a possible 398. plFiberPlate : 26 possible sky positions to use as objects from a possible 397. plFiberPlate : 16 possible sky positions to use as objects from a possible 396. plFiberPlate : 8 possible sky positions to use as objects from a possible 395. plFiberPlate : 8 possible sky positions to use as objects from a possible 394. plFiberPlate : 7 possible sky positions to use as objects from a possible 393. plFiberPlate : 9 possible sky positions to use as objects from a possible 392. plFiberPlate : 15 possible sky positions to use as objects from a possible 391. plFiberPlate : 34 possible sky positions to use as objects from a possible 390. plFiberPlate : 31 possible sky positions to use as objects from a possible 389. plFiberPlate : 25 possible sky positions to use as objects from a possible 388. plFiberPlate : 19 possible sky positions to use as objects from a possible 387. plFiberPlate : 19 possible sky positions to use as objects from a possible 386. plFiberPlate : 17 possible sky positions to use as objects from a possible 385. plFiberPlate : 2 possible sky positions to use as objects from a possible 384. plFiberPlate : 8 possible sky positions to use as objects from a possible 383. plFiberPlate : 14 possible sky positions to use as objects from a possible 382. plFiberPlate : 63 possible sky positions to use as objects from a possible 381. plFiberPlate : 59 possible sky positions to use as objects from a possible 380. plFiberPlate : 31 possible sky positions to use as objects from a possible 379. plFiberPlate : 24 possible sky positions to use as objects from a possible 378. plFiberPlate : 10 possible sky positions to use as objects from a possible 377. plFiberPlate : 14 possible sky positions to use as objects from a possible 376. plFiberPlate : 9 possible sky positions to use as objects from a possible 375. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1055.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1056.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1056.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1057.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 105 2 16 70 3 6 14 4 3 22 5 22 103 6 18 77 7 5 34 8 6 40 9 19 89 10 23 101 11 20 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 246 74 plFiberPlate : adding spectro-photo std with objId = 3180 0 2 255 19 plFiberPlate : adding spectro-photo std with objId = 3180 0 5 252 62 plFiberPlate : adding spectro-photo std with objId = 3180 0 4 258 19 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 256 14 plFiberPlate : adding spectro-photo std with objId = 3185 0 2 46 49 plFiberPlate : adding spectro-photo std with objId = 3180 0 5 258 46 plFiberPlate : adding spectro-photo std with objId = 3177 0 5 240 55 plFiberPlate : 31 possible sky positions to use as objects from a possible 372. plFiberPlate : 16 possible sky positions to use as objects from a possible 371. plFiberPlate : 31 possible sky positions to use as objects from a possible 370. plFiberPlate : 14 possible sky positions to use as objects from a possible 369. plFiberPlate : 19 possible sky positions to use as objects from a possible 368. plFiberPlate : 26 possible sky positions to use as objects from a possible 367. plFiberPlate : 35 possible sky positions to use as objects from a possible 366. plFiberPlate : 25 possible sky positions to use as objects from a possible 365. plFiberPlate : 34 possible sky positions to use as objects from a possible 364. plFiberPlate : 31 possible sky positions to use as objects from a possible 363. plFiberPlate : 28 possible sky positions to use as objects from a possible 362. plFiberPlate : 16 possible sky positions to use as objects from a possible 361. plFiberPlate : 10 possible sky positions to use as objects from a possible 360. plFiberPlate : 9 possible sky positions to use as objects from a possible 359. plFiberPlate : 18 possible sky positions to use as objects from a possible 358. plFiberPlate : 21 possible sky positions to use as objects from a possible 357. plFiberPlate : 31 possible sky positions to use as objects from a possible 356. plFiberPlate : 22 possible sky positions to use as objects from a possible 355. plFiberPlate : 28 possible sky positions to use as objects from a possible 354. plFiberPlate : 23 possible sky positions to use as objects from a possible 353. plFiberPlate : 17 possible sky positions to use as objects from a possible 352. plFiberPlate : 17 possible sky positions to use as objects from a possible 351. plFiberPlate : 12 possible sky positions to use as objects from a possible 350. plFiberPlate : 6 possible sky positions to use as objects from a possible 349. plFiberPlate : 3 possible sky positions to use as objects from a possible 348. plFiberPlate : 69 possible sky positions to use as objects from a possible 347. plFiberPlate : 52 possible sky positions to use as objects from a possible 346. plFiberPlate : 31 possible sky positions to use as objects from a possible 345. plFiberPlate : 15 possible sky positions to use as objects from a possible 344. plFiberPlate : 10 possible sky positions to use as objects from a possible 343. plFiberPlate : 11 possible sky positions to use as objects from a possible 342. plFiberPlate : 19 possible sky positions to use as objects from a possible 341. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1056.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1057.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1057.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.06.1/plPlugMapP-1058.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 99 2 18 72 3 5 17 4 5 22 5 22 104 6 11 95 7 0 26 8 7 32 9 11 92 10 25 94 11 20 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 56 49 plFiberPlate : adding spectro-photo std with objId = 3177 0 4 256 14 plFiberPlate : adding spectro-photo std with objId = 3177 0 3 270 38 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 48 89 plFiberPlate : adding spectro-photo std with objId = 3185 0 1 46 77 plFiberPlate : adding spectro-photo std with objId = 3185 0 2 60 108 plFiberPlate : adding spectro-photo std with objId = 3185 0 5 49 85 plFiberPlate : adding spectro-photo std with objId = 3185 0 3 56 45 plFiberPlate : 26 possible sky positions to use as objects from a possible 355. plFiberPlate : 27 possible sky positions to use as objects from a possible 354. plFiberPlate : 16 possible sky positions to use as objects from a possible 353. plFiberPlate : 18 possible sky positions to use as objects from a possible 352. plFiberPlate : 21 possible sky positions to use as objects from a possible 351. plFiberPlate : 9 possible sky positions to use as objects from a possible 350. plFiberPlate : 32 possible sky positions to use as objects from a possible 349. plFiberPlate : 10 possible sky positions to use as objects from a possible 348. plFiberPlate : 20 possible sky positions to use as objects from a possible 347. plFiberPlate : 14 possible sky positions to use as objects from a possible 346. plFiberPlate : 8 possible sky positions to use as objects from a possible 345. plFiberPlate : 10 possible sky positions to use as objects from a possible 344. plFiberPlate : 16 possible sky positions to use as objects from a possible 343. plFiberPlate : 2 possible sky positions to use as objects from a possible 342. plFiberPlate : 6 possible sky positions to use as objects from a possible 341. plFiberPlate : 2 possible sky positions to use as objects from a possible 340. plFiberPlate : 38 possible sky positions to use as objects from a possible 339. plFiberPlate : 31 possible sky positions to use as objects from a possible 338. plFiberPlate : 30 possible sky positions to use as objects from a possible 337. plFiberPlate : 24 possible sky positions to use as objects from a possible 336. plFiberPlate : 16 possible sky positions to use as objects from a possible 335. plFiberPlate : 10 possible sky positions to use as objects from a possible 334. plFiberPlate : 13 possible sky positions to use as objects from a possible 333. plFiberPlate : 10 possible sky positions to use as objects from a possible 332. plFiberPlate : 10 possible sky positions to use as objects from a possible 331. plFiberPlate : 62 possible sky positions to use as objects from a possible 330. plFiberPlate : 51 possible sky positions to use as objects from a possible 329. plFiberPlate : 56 possible sky positions to use as objects from a possible 328. plFiberPlate : 33 possible sky positions to use as objects from a possible 327. plFiberPlate : 8 possible sky positions to use as objects from a possible 326. plFiberPlate : 4 possible sky positions to use as objects from a possible 325. plFiberPlate : 6 possible sky positions to use as objects from a possible 324. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1057.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1058.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.06.1/plOverlay-1058.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Jun 17 13:20:13 CDT 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_11/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_125/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_125/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_9/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 21 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1038.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1038.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1038.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1039.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.3190,-7.5164) and (10.72,-6.46) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1039.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1039.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1040.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9970,-3.7899) and (12.62,-1.50) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1040.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1040.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1041.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0536,4.2149) and (-12.28,3.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1041.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1041.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1042.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.9955,-10.7167) and (5.96,-10.98) plMakeFanucCodes : fixed path between (-9.8747,-8.0852) and (-10.87,-6.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1042.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1042.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1043.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0422,-3.9729) and (-12.39,-2.75) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1043.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1043.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1044.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.7030,-9.9786) and (6.16,-11.00) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1044.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1044.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 18 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1045.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1045.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1045.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1046.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4383,4.9623) and (-12.36,3.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1046.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1046.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1047.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4710,5.4966) and (-12.01,3.82) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1047.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1047.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1048.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1048.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1048.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1049.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.1471,-7.6997) and (10.69,-6.76) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1049.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1049.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1050.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.2328,11.0704) and (-3.48,12.19) plMakeFanucCodes : fixed path between (6.0909,-11.0212) and (4.93,-11.77) plMakeFanucCodes : fixed path between (3.7137,-12.1910) and (3.09,-12.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1050.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.3080,7.3755) and (11.70,2.52) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1050.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 4 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1051.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1051.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1051.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1052.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.3135,5.8659) and (-11.60,5.12) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1052.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1052.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1053.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.6074,-1.7362) and (12.78,-0.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1053.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1053.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1054.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1054.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1054.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1055.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1055.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1055.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1056.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.7521,8.1828) and (-10.80,6.77) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1056.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1056.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1057.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1057.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.4308,4.9775) and (-12.37,-2.98) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1057.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1058.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1058.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.5109,-8.2908) and (-11.63,2.29) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.06.1/plFanuc-1058.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Jun 17 13:21:20 CDT 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_11/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_125/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_125/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_9/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e93568 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 21 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1038 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1039 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1040 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1041 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1042 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1043 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1044 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1045 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1046 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1047 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1048 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1049 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1050 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1051 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1052 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1053 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1054 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1055 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1056 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1057 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1058 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13.3 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Jun 17 13:21:52 CDT 2002 Begin running plateEnder dr2002.06.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_11/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v13_125/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v13_125/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_9/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2002.06.1 -morePipes 1 failed. PS: Read file for stderr output of this job.