Sender: LSF System Subject: Job 113387: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Jan 30 18:09:57 2004 Results reported at Fri Jan 30 18:12:33 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_137 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.02.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 140.93 sec. Max Memory : 11 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Fri Jan 30 18:09:58 CST 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Jan 30 18:09:59 CST 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/speclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/v4_10_2/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_137/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Fri Jan 30 18:09:59 CST 2004 ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_137/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/v4_10_2/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECLOG_DIR=/data/dp9.a/data/spectro/speclog SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_LBWFRN --------------------------------------------------------------- --------------------------------------------------------------- Fri Jan 30 18:09:59 CST 2004 Begin running plate --------------------------------------------------------------- Fri Jan 30 18:09:59 CST 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_137/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_137/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bca194 makePlates : beginning loop over plObs chain; makePlates : making 18 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1243.par makePlates : plateInfo struct for plate 1738 : (h4).mjd 53092 (h4).raCen 135.051 (h4).decCen 9.844697 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 135.051 9.845 135.051 11.345 plMakePlateFromTile : mjd of obs : 53092.480713 Observed HA/dec of plate center, fiducial point (deg) : -30.002 9.837 -30.003 11.337 The rotation angle of the fid. point is 45.804921 plMakePlateFromTile : beginning loop over 1222 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1244.par makePlates : plateInfo struct for plate 1739 : (h4).mjd 53092 (h4).raCen 137.9891 (h4).decCen 10.32544 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.989 10.325 137.989 11.825 plMakePlateFromTile : mjd of obs : 53092.483311 Observed HA/dec of plate center, fiducial point (deg) : -32.002 10.317 -32.003 11.817 The rotation angle of the fid. point is 47.753027 plMakePlateFromTile : beginning loop over 1201 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1245.par makePlates : plateInfo struct for plate 1740 : (h4).mjd 53092 (h4).raCen 140.8317 (h4).decCen 10.88294 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.832 10.883 140.832 12.383 plMakePlateFromTile : mjd of obs : 53092.524439 Observed HA/dec of plate center, fiducial point (deg) : -20.002 10.873 -20.003 12.372 The rotation angle of the fid. point is 36.944071 plMakePlateFromTile : beginning loop over 1260 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1246.par makePlates : plateInfo struct for plate 1741 : (h4).mjd 53092 (h4).raCen 143.4367 (h4).decCen 11.30876 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 143.437 11.309 143.437 12.809 plMakePlateFromTile : mjd of obs : 53092.523343 Observed HA/dec of plate center, fiducial point (deg) : -23.002 11.298 -23.003 12.798 The rotation angle of the fid. point is 40.915593 plMakePlateFromTile : beginning loop over 1211 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1247.par makePlates : plateInfo struct for plate 1742 : (h4).mjd 53092 (h4).raCen 145.9965 (h4).decCen 11.75203 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.996 11.752 145.996 13.252 plMakePlateFromTile : mjd of obs : 53092.524892 Observed HA/dec of plate center, fiducial point (deg) : -25.002 11.741 -25.003 13.240 The rotation angle of the fid. point is 43.472676 plMakePlateFromTile : beginning loop over 1271 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1248.par makePlates : plateInfo struct for plate 1743 : (h4).mjd 53092 (h4).raCen 148.3777 (h4).decCen 12.14099 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 148.378 12.141 148.378 13.641 plMakePlateFromTile : mjd of obs : 53092.523176 Observed HA/dec of plate center, fiducial point (deg) : -28.002 12.129 -28.003 13.629 The rotation angle of the fid. point is 46.611431 plMakePlateFromTile : beginning loop over 1284 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1249.par makePlates : plateInfo struct for plate 1744 : (h4).mjd 53092 (h4).raCen 150.6832 (h4).decCen 12.47937 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.683 12.479 150.683 13.979 plMakePlateFromTile : mjd of obs : 53092.524020 Observed HA/dec of plate center, fiducial point (deg) : -30.002 12.467 -30.003 13.966 The rotation angle of the fid. point is 48.552394 plMakePlateFromTile : beginning loop over 1250 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1250.par makePlates : plateInfo struct for plate 1745 : (h4).mjd 53092 (h4).raCen 153.0916 (h4).decCen 12.81512 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 153.092 12.815 153.092 14.315 plMakePlateFromTile : mjd of obs : 53092.522379 Observed HA/dec of plate center, fiducial point (deg) : -33.002 12.802 -33.003 14.302 The rotation angle of the fid. point is 50.948793 plMakePlateFromTile : beginning loop over 1278 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1251.par makePlates : plateInfo struct for plate 1746 : (h4).mjd 53092 (h4).raCen 155.2921 (h4).decCen 13.12355 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.292 13.124 155.292 14.624 plMakePlateFromTile : mjd of obs : 53092.522932 Observed HA/dec of plate center, fiducial point (deg) : -35.002 13.110 -35.003 14.610 The rotation angle of the fid. point is 52.437773 plMakePlateFromTile : beginning loop over 1256 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1252.par makePlates : plateInfo struct for plate 1747 : (h4).mjd 53092 (h4).raCen 157.1916 (h4).decCen 13.45497 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.192 13.455 157.192 14.955 plMakePlateFromTile : mjd of obs : 53092.605783 Observed HA/dec of plate center, fiducial point (deg) : -7.002 13.440 -7.003 14.939 The rotation angle of the fid. point is 17.138273 plMakePlateFromTile : beginning loop over 1251 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1253.par makePlates : plateInfo struct for plate 1748 : (h4).mjd 53092 (h4).raCen 159.4961 (h4).decCen 13.58071 (h4).haCen -9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.496 13.581 159.496 15.081 plMakePlateFromTile : mjd of obs : 53092.606625 Observed HA/dec of plate center, fiducial point (deg) : -9.002 13.565 -9.003 15.064 The rotation angle of the fid. point is 21.654996 plMakePlateFromTile : beginning loop over 1289 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1254.par makePlates : plateInfo struct for plate 1749 : (h4).mjd 53092 (h4).raCen 161.7867 (h4).decCen 13.84504 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.787 13.845 161.787 15.345 plMakePlateFromTile : mjd of obs : 53092.607428 Observed HA/dec of plate center, fiducial point (deg) : -11.002 13.829 -11.003 15.328 The rotation angle of the fid. point is 26.047479 plMakePlateFromTile : beginning loop over 1292 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1255.par makePlates : plateInfo struct for plate 1750 : (h4).mjd 53092 (h4).raCen 164.1119 (h4).decCen 14.08223 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 164.112 14.082 164.112 15.582 plMakePlateFromTile : mjd of obs : 53092.605557 Observed HA/dec of plate center, fiducial point (deg) : -14.002 14.066 -14.003 15.565 The rotation angle of the fid. point is 31.902671 plMakePlateFromTile : beginning loop over 1271 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1256.par makePlates : plateInfo struct for plate 1751 : (h4).mjd 53092 (h4).raCen 166.4398 (h4).decCen 14.22959 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.440 14.230 166.440 15.730 plMakePlateFromTile : mjd of obs : 53092.606463 Observed HA/dec of plate center, fiducial point (deg) : -16.002 14.213 -16.003 15.712 The rotation angle of the fid. point is 35.386622 plMakePlateFromTile : beginning loop over 1271 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1257.par makePlates : plateInfo struct for plate 1752 : (h4).mjd 53092 (h4).raCen 168.6334 (h4).decCen 14.41526 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.633 14.415 168.633 15.915 plMakePlateFromTile : mjd of obs : 53092.606997 Observed HA/dec of plate center, fiducial point (deg) : -18.002 14.398 -18.003 15.898 The rotation angle of the fid. point is 38.601201 plMakePlateFromTile : beginning loop over 1300 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1258.par makePlates : plateInfo struct for plate 1753 : (h4).mjd 53092 (h4).raCen 170.757 (h4).decCen 14.55738 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.757 14.557 170.757 16.057 plMakePlateFromTile : mjd of obs : 53092.607338 Observed HA/dec of plate center, fiducial point (deg) : -20.002 14.540 -20.003 16.040 The rotation angle of the fid. point is 41.449285 plMakePlateFromTile : beginning loop over 1277 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1259.par makePlates : plateInfo struct for plate 1754 : (h4).mjd 53092 (h4).raCen 172.6675 (h4).decCen 14.65788 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.667 14.658 172.667 16.158 plMakePlateFromTile : mjd of obs : 53092.607088 Observed HA/dec of plate center, fiducial point (deg) : -22.002 14.640 -22.003 16.140 The rotation angle of the fid. point is 43.951654 plMakePlateFromTile : beginning loop over 1245 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk90/complete//plPlugMapT-1260.par makePlates : plateInfo struct for plate 1755 : (h4).mjd 53092 (h4).raCen 174.4256 (h4).decCen 14.75617 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.426 14.756 174.426 16.256 plMakePlateFromTile : mjd of obs : 53092.606416 Observed HA/dec of plate center, fiducial point (deg) : -24.002 14.739 -24.003 16.238 The rotation angle of the fid. point is 46.186067 plMakePlateFromTile : beginning loop over 1172 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Jan 30 18:10:24 CST 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_137/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_137/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 18 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1738.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 120 2 10 117 3 13 97 4 27 93 5 9 64 6 2 15 7 7 29 8 13 85 9 17 65 10 21 150 11 15 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 117 105 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 118 115 plFiberPlate : adding spectro-photo std with objId = 3830 41 5 114 89 plFiberPlate : adding spectro-photo std with objId = 3830 41 2 119 87 plFiberPlate : adding spectro-photo std with objId = 3830 41 2 122 96 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 129 99 plFiberPlate : adding spectro-photo std with objId = 3830 41 5 121 171 plFiberPlate : adding spectro-photo std with objId = 3830 41 4 123 61 plFiberPlate : 97 possible sky positions to use as objects from a possible 466. plFiberPlate : 77 possible sky positions to use as objects from a possible 465. plFiberPlate : 71 possible sky positions to use as objects from a possible 464. plFiberPlate : 64 possible sky positions to use as objects from a possible 463. plFiberPlate : 30 possible sky positions to use as objects from a possible 462. plFiberPlate : 22 possible sky positions to use as objects from a possible 461. plFiberPlate : 78 possible sky positions to use as objects from a possible 460. plFiberPlate : 62 possible sky positions to use as objects from a possible 459. plFiberPlate : 43 possible sky positions to use as objects from a possible 458. plFiberPlate : 35 possible sky positions to use as objects from a possible 457. plFiberPlate : 21 possible sky positions to use as objects from a possible 456. plFiberPlate : 11 possible sky positions to use as objects from a possible 455. plFiberPlate : 12 possible sky positions to use as objects from a possible 454. plFiberPlate : 8 possible sky positions to use as objects from a possible 453. plFiberPlate : 16 possible sky positions to use as objects from a possible 452. plFiberPlate : 13 possible sky positions to use as objects from a possible 451. plFiberPlate : 48 possible sky positions to use as objects from a possible 450. plFiberPlate : 32 possible sky positions to use as objects from a possible 449. plFiberPlate : 24 possible sky positions to use as objects from a possible 448. plFiberPlate : 16 possible sky positions to use as objects from a possible 447. plFiberPlate : 10 possible sky positions to use as objects from a possible 446. plFiberPlate : 11 possible sky positions to use as objects from a possible 445. plFiberPlate : 4 possible sky positions to use as objects from a possible 444. plFiberPlate : 7 possible sky positions to use as objects from a possible 443. plFiberPlate : 19 possible sky positions to use as objects from a possible 442. plFiberPlate : 15 possible sky positions to use as objects from a possible 441. plFiberPlate : 19 possible sky positions to use as objects from a possible 440. plFiberPlate : 20 possible sky positions to use as objects from a possible 439. plFiberPlate : 6 possible sky positions to use as objects from a possible 438. plFiberPlate : 9 possible sky positions to use as objects from a possible 437. plFiberPlate : 3 possible sky positions to use as objects from a possible 436. plFiberPlate : 8 possible sky positions to use as objects from a possible 435. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1738.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1738.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1739.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 115 2 8 109 3 11 96 4 18 97 5 9 58 6 5 16 7 7 42 8 20 70 9 17 62 10 31 140 11 24 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3830 41 4 133 73 plFiberPlate : adding spectro-photo std with objId = 3830 41 5 139 102 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 146 102 plFiberPlate : adding spectro-photo std with objId = 3830 41 5 147 117 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 151 14 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 151 15 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 148 111 plFiberPlate : adding spectro-photo std with objId = 3830 41 2 142 11 plFiberPlate : 105 possible sky positions to use as objects from a possible 451. plFiberPlate : 70 possible sky positions to use as objects from a possible 450. plFiberPlate : 45 possible sky positions to use as objects from a possible 449. plFiberPlate : 30 possible sky positions to use as objects from a possible 448. plFiberPlate : 25 possible sky positions to use as objects from a possible 447. plFiberPlate : 59 possible sky positions to use as objects from a possible 446. plFiberPlate : 14 possible sky positions to use as objects from a possible 445. plFiberPlate : 31 possible sky positions to use as objects from a possible 444. plFiberPlate : 23 possible sky positions to use as objects from a possible 443. plFiberPlate : 17 possible sky positions to use as objects from a possible 442. plFiberPlate : 11 possible sky positions to use as objects from a possible 441. plFiberPlate : 8 possible sky positions to use as objects from a possible 440. plFiberPlate : 4 possible sky positions to use as objects from a possible 439. plFiberPlate : 14 possible sky positions to use as objects from a possible 438. plFiberPlate : 6 possible sky positions to use as objects from a possible 437. plFiberPlate : 6 possible sky positions to use as objects from a possible 436. plFiberPlate : 50 possible sky positions to use as objects from a possible 435. plFiberPlate : 43 possible sky positions to use as objects from a possible 434. plFiberPlate : 24 possible sky positions to use as objects from a possible 433. plFiberPlate : 16 possible sky positions to use as objects from a possible 432. plFiberPlate : 14 possible sky positions to use as objects from a possible 431. plFiberPlate : 11 possible sky positions to use as objects from a possible 430. plFiberPlate : 2 possible sky positions to use as objects from a possible 429. plFiberPlate : 13 possible sky positions to use as objects from a possible 428. plFiberPlate : 17 possible sky positions to use as objects from a possible 427. plFiberPlate : 5 possible sky positions to use as objects from a possible 426. plFiberPlate : 2 possible sky positions to use as objects from a possible 425. plFiberPlate : 4 possible sky positions to use as objects from a possible 424. plFiberPlate : 14 possible sky positions to use as objects from a possible 423. plFiberPlate : 8 possible sky positions to use as objects from a possible 422. plFiberPlate : 5 possible sky positions to use as objects from a possible 421. plFiberPlate : 9 possible sky positions to use as objects from a possible 420. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1738.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1739.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1739.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1740.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 133 2 9 124 3 13 97 4 19 94 5 13 85 6 2 26 7 4 57 8 15 94 9 7 99 10 26 152 11 19 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 15 81 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 16 92 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 165 70 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 162 73 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 168 103 plFiberPlate : adding spectro-photo std with objId = 3830 41 2 155 36 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 172 120 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 16 109 plFiberPlate : 101 possible sky positions to use as objects from a possible 519. plFiberPlate : 93 possible sky positions to use as objects from a possible 518. plFiberPlate : 38 possible sky positions to use as objects from a possible 517. plFiberPlate : 21 possible sky positions to use as objects from a possible 516. plFiberPlate : 18 possible sky positions to use as objects from a possible 515. plFiberPlate : 98 possible sky positions to use as objects from a possible 514. plFiberPlate : 45 possible sky positions to use as objects from a possible 513. plFiberPlate : 54 possible sky positions to use as objects from a possible 512. plFiberPlate : 41 possible sky positions to use as objects from a possible 511. plFiberPlate : 15 possible sky positions to use as objects from a possible 510. plFiberPlate : 6 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 16 possible sky positions to use as objects from a possible 507. plFiberPlate : 13 possible sky positions to use as objects from a possible 506. plFiberPlate : 20 possible sky positions to use as objects from a possible 505. plFiberPlate : 18 possible sky positions to use as objects from a possible 504. plFiberPlate : 52 possible sky positions to use as objects from a possible 503. plFiberPlate : 51 possible sky positions to use as objects from a possible 502. plFiberPlate : 27 possible sky positions to use as objects from a possible 501. plFiberPlate : 18 possible sky positions to use as objects from a possible 500. plFiberPlate : 19 possible sky positions to use as objects from a possible 499. plFiberPlate : 17 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 5 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 20 possible sky positions to use as objects from a possible 494. plFiberPlate : 13 possible sky positions to use as objects from a possible 493. plFiberPlate : 11 possible sky positions to use as objects from a possible 492. plFiberPlate : 10 possible sky positions to use as objects from a possible 491. plFiberPlate : 19 possible sky positions to use as objects from a possible 490. plFiberPlate : 13 possible sky positions to use as objects from a possible 489. plFiberPlate : 25 possible sky positions to use as objects from a possible 488. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1739.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1740.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1740.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1741.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 109 2 14 105 3 6 92 4 9 108 5 10 76 6 3 27 7 0 54 8 11 102 9 5 79 10 19 144 11 13 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 179 87 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 182 15 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 179 72 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 172 120 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 25 104 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 182 131 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 182 127 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 40 132 plFiberPlate : 87 possible sky positions to use as objects from a possible 492. plFiberPlate : 78 possible sky positions to use as objects from a possible 491. plFiberPlate : 71 possible sky positions to use as objects from a possible 490. plFiberPlate : 22 possible sky positions to use as objects from a possible 489. plFiberPlate : 27 possible sky positions to use as objects from a possible 488. plFiberPlate : 29 possible sky positions to use as objects from a possible 487. plFiberPlate : 22 possible sky positions to use as objects from a possible 486. plFiberPlate : 48 possible sky positions to use as objects from a possible 485. plFiberPlate : 27 possible sky positions to use as objects from a possible 484. plFiberPlate : 11 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 6 possible sky positions to use as objects from a possible 481. plFiberPlate : 5 possible sky positions to use as objects from a possible 480. plFiberPlate : 2 possible sky positions to use as objects from a possible 479. plFiberPlate : 11 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 56 possible sky positions to use as objects from a possible 476. plFiberPlate : 44 possible sky positions to use as objects from a possible 475. plFiberPlate : 35 possible sky positions to use as objects from a possible 474. plFiberPlate : 24 possible sky positions to use as objects from a possible 473. plFiberPlate : 10 possible sky positions to use as objects from a possible 472. plFiberPlate : 9 possible sky positions to use as objects from a possible 471. plFiberPlate : 9 possible sky positions to use as objects from a possible 470. plFiberPlate : 6 possible sky positions to use as objects from a possible 469. plFiberPlate : 15 possible sky positions to use as objects from a possible 468. plFiberPlate : 14 possible sky positions to use as objects from a possible 467. plFiberPlate : 9 possible sky positions to use as objects from a possible 466. plFiberPlate : 5 possible sky positions to use as objects from a possible 465. plFiberPlate : 5 possible sky positions to use as objects from a possible 464. plFiberPlate : 1 possible sky positions to use as objects from a possible 463. plFiberPlate : 12 possible sky positions to use as objects from a possible 462. plFiberPlate : 13 possible sky positions to use as objects from a possible 461. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1740.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1741.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1741.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1742.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 122 2 12 105 3 13 101 4 13 92 5 14 87 6 8 38 7 15 48 8 28 101 9 18 85 10 24 146 11 11 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 54 38 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 200 84 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 190 118 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 197 162 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 42 112 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 54 38 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 192 54 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 40 132 plFiberPlate : 87 possible sky positions to use as objects from a possible 512. plFiberPlate : 75 possible sky positions to use as objects from a possible 511. plFiberPlate : 52 possible sky positions to use as objects from a possible 510. plFiberPlate : 19 possible sky positions to use as objects from a possible 509. plFiberPlate : 21 possible sky positions to use as objects from a possible 508. plFiberPlate : 25 possible sky positions to use as objects from a possible 507. plFiberPlate : 32 possible sky positions to use as objects from a possible 506. plFiberPlate : 46 possible sky positions to use as objects from a possible 505. plFiberPlate : 38 possible sky positions to use as objects from a possible 504. plFiberPlate : 23 possible sky positions to use as objects from a possible 503. plFiberPlate : 22 possible sky positions to use as objects from a possible 502. plFiberPlate : 21 possible sky positions to use as objects from a possible 501. plFiberPlate : 8 possible sky positions to use as objects from a possible 500. plFiberPlate : 9 possible sky positions to use as objects from a possible 499. plFiberPlate : 17 possible sky positions to use as objects from a possible 498. plFiberPlate : 16 possible sky positions to use as objects from a possible 497. plFiberPlate : 63 possible sky positions to use as objects from a possible 496. plFiberPlate : 54 possible sky positions to use as objects from a possible 495. plFiberPlate : 34 possible sky positions to use as objects from a possible 494. plFiberPlate : 20 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 8 possible sky positions to use as objects from a possible 491. plFiberPlate : 9 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 36 possible sky positions to use as objects from a possible 488. plFiberPlate : 29 possible sky positions to use as objects from a possible 487. plFiberPlate : 26 possible sky positions to use as objects from a possible 486. plFiberPlate : 25 possible sky positions to use as objects from a possible 485. plFiberPlate : 18 possible sky positions to use as objects from a possible 484. plFiberPlate : 7 possible sky positions to use as objects from a possible 483. plFiberPlate : 16 possible sky positions to use as objects from a possible 482. plFiberPlate : 18 possible sky positions to use as objects from a possible 481. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1741.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1742.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1742.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1743.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 117 2 6 116 3 7 103 4 18 116 5 19 101 6 5 45 7 4 57 8 11 98 9 10 89 10 13 166 11 10 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 66 141 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 214 38 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 58 69 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 210 43 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 207 80 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 209 66 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 221 2 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 206 81 plFiberPlate : 112 possible sky positions to use as objects from a possible 556. plFiberPlate : 90 possible sky positions to use as objects from a possible 555. plFiberPlate : 56 possible sky positions to use as objects from a possible 554. plFiberPlate : 42 possible sky positions to use as objects from a possible 553. plFiberPlate : 41 possible sky positions to use as objects from a possible 552. plFiberPlate : 21 possible sky positions to use as objects from a possible 551. plFiberPlate : 35 possible sky positions to use as objects from a possible 550. plFiberPlate : 60 possible sky positions to use as objects from a possible 549. plFiberPlate : 31 possible sky positions to use as objects from a possible 548. plFiberPlate : 22 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 19 possible sky positions to use as objects from a possible 541. plFiberPlate : 60 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 10 possible sky positions to use as objects from a possible 538. plFiberPlate : 10 possible sky positions to use as objects from a possible 537. plFiberPlate : 3 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 7 possible sky positions to use as objects from a possible 533. plFiberPlate : 17 possible sky positions to use as objects from a possible 532. plFiberPlate : 34 possible sky positions to use as objects from a possible 531. plFiberPlate : 18 possible sky positions to use as objects from a possible 530. plFiberPlate : 9 possible sky positions to use as objects from a possible 529. plFiberPlate : 22 possible sky positions to use as objects from a possible 528. plFiberPlate : 5 possible sky positions to use as objects from a possible 527. plFiberPlate : 5 possible sky positions to use as objects from a possible 526. plFiberPlate : 29 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1742.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1743.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1743.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1744.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 113 2 12 107 3 7 82 4 12 96 5 16 101 6 9 51 7 7 58 8 10 105 9 13 89 10 16 149 11 13 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 229 73 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 236 72 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 226 61 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 78 72 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 74 40 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 221 2 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 76 96 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 229 39 plFiberPlate : 107 possible sky positions to use as objects from a possible 527. plFiberPlate : 86 possible sky positions to use as objects from a possible 526. plFiberPlate : 72 possible sky positions to use as objects from a possible 525. plFiberPlate : 49 possible sky positions to use as objects from a possible 524. plFiberPlate : 28 possible sky positions to use as objects from a possible 523. plFiberPlate : 35 possible sky positions to use as objects from a possible 522. plFiberPlate : 52 possible sky positions to use as objects from a possible 521. plFiberPlate : 75 possible sky positions to use as objects from a possible 520. plFiberPlate : 54 possible sky positions to use as objects from a possible 519. plFiberPlate : 29 possible sky positions to use as objects from a possible 518. plFiberPlate : 16 possible sky positions to use as objects from a possible 517. plFiberPlate : 10 possible sky positions to use as objects from a possible 516. plFiberPlate : 2 possible sky positions to use as objects from a possible 515. plFiberPlate : 14 possible sky positions to use as objects from a possible 514. plFiberPlate : 15 possible sky positions to use as objects from a possible 513. plFiberPlate : 24 possible sky positions to use as objects from a possible 512. plFiberPlate : 60 possible sky positions to use as objects from a possible 511. plFiberPlate : 48 possible sky positions to use as objects from a possible 510. plFiberPlate : 35 possible sky positions to use as objects from a possible 509. plFiberPlate : 22 possible sky positions to use as objects from a possible 508. plFiberPlate : 16 possible sky positions to use as objects from a possible 507. plFiberPlate : 10 possible sky positions to use as objects from a possible 506. plFiberPlate : 11 possible sky positions to use as objects from a possible 505. plFiberPlate : 20 possible sky positions to use as objects from a possible 504. plFiberPlate : 19 possible sky positions to use as objects from a possible 503. plFiberPlate : 48 possible sky positions to use as objects from a possible 502. plFiberPlate : 36 possible sky positions to use as objects from a possible 501. plFiberPlate : 22 possible sky positions to use as objects from a possible 500. plFiberPlate : 11 possible sky positions to use as objects from a possible 499. plFiberPlate : 4 possible sky positions to use as objects from a possible 498. plFiberPlate : 18 possible sky positions to use as objects from a possible 497. plFiberPlate : 19 possible sky positions to use as objects from a possible 496. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1743.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1744.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1744.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1745.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 134 2 8 123 3 7 78 4 10 82 5 10 102 6 9 49 7 7 57 8 12 102 9 14 102 10 14 162 11 11 121 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 95 8 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 252 29 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 102 55 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 101 39 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 247 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 236 73 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 105 22 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 98 40 plFiberPlate : 100 possible sky positions to use as objects from a possible 542. plFiberPlate : 77 possible sky positions to use as objects from a possible 541. plFiberPlate : 56 possible sky positions to use as objects from a possible 540. plFiberPlate : 27 possible sky positions to use as objects from a possible 539. plFiberPlate : 31 possible sky positions to use as objects from a possible 538. plFiberPlate : 47 possible sky positions to use as objects from a possible 537. plFiberPlate : 48 possible sky positions to use as objects from a possible 536. plFiberPlate : 69 possible sky positions to use as objects from a possible 535. plFiberPlate : 41 possible sky positions to use as objects from a possible 534. plFiberPlate : 29 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 15 possible sky positions to use as objects from a possible 531. plFiberPlate : 13 possible sky positions to use as objects from a possible 530. plFiberPlate : 14 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 7 possible sky positions to use as objects from a possible 527. plFiberPlate : 86 possible sky positions to use as objects from a possible 526. plFiberPlate : 50 possible sky positions to use as objects from a possible 525. plFiberPlate : 51 possible sky positions to use as objects from a possible 524. plFiberPlate : 28 possible sky positions to use as objects from a possible 523. plFiberPlate : 16 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 16 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 31 possible sky positions to use as objects from a possible 517. plFiberPlate : 29 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 10 possible sky positions to use as objects from a possible 514. plFiberPlate : 19 possible sky positions to use as objects from a possible 513. plFiberPlate : 12 possible sky positions to use as objects from a possible 512. plFiberPlate : 4 possible sky positions to use as objects from a possible 511. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1744.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1745.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1745.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1746.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 122 2 6 97 3 9 81 4 12 117 5 10 95 6 4 43 7 10 62 8 20 113 9 13 81 10 10 135 11 4 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 252 29 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 265 8 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 102 28 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 104 43 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 109 94 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 105 22 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 258 89 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 268 49 plFiberPlate : 95 possible sky positions to use as objects from a possible 540. plFiberPlate : 61 possible sky positions to use as objects from a possible 539. plFiberPlate : 15 possible sky positions to use as objects from a possible 538. plFiberPlate : 8 possible sky positions to use as objects from a possible 537. plFiberPlate : 22 possible sky positions to use as objects from a possible 536. plFiberPlate : 16 possible sky positions to use as objects from a possible 535. plFiberPlate : 55 possible sky positions to use as objects from a possible 534. plFiberPlate : 67 possible sky positions to use as objects from a possible 533. plFiberPlate : 22 possible sky positions to use as objects from a possible 532. plFiberPlate : 11 possible sky positions to use as objects from a possible 531. plFiberPlate : 6 possible sky positions to use as objects from a possible 530. plFiberPlate : 8 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 4 possible sky positions to use as objects from a possible 527. plFiberPlate : 28 possible sky positions to use as objects from a possible 526. plFiberPlate : 21 possible sky positions to use as objects from a possible 525. plFiberPlate : 53 possible sky positions to use as objects from a possible 524. plFiberPlate : 38 possible sky positions to use as objects from a possible 523. plFiberPlate : 32 possible sky positions to use as objects from a possible 522. plFiberPlate : 18 possible sky positions to use as objects from a possible 521. plFiberPlate : 6 possible sky positions to use as objects from a possible 520. plFiberPlate : 2 possible sky positions to use as objects from a possible 519. plFiberPlate : 6 possible sky positions to use as objects from a possible 518. plFiberPlate : 36 possible sky positions to use as objects from a possible 517. plFiberPlate : 27 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 8 possible sky positions to use as objects from a possible 514. plFiberPlate : 5 possible sky positions to use as objects from a possible 513. plFiberPlate : 3 possible sky positions to use as objects from a possible 512. plFiberPlate : 5 possible sky positions to use as objects from a possible 511. plFiberPlate : 10 possible sky positions to use as objects from a possible 510. plFiberPlate : 21 possible sky positions to use as objects from a possible 509. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1745.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1746.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1746.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1747.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 103 2 8 98 3 5 103 4 12 115 5 17 106 6 5 47 7 3 47 8 6 85 9 6 90 10 15 153 11 12 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 271 53 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 268 85 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 273 50 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 119 52 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 281 64 plFiberPlate : adding spectro-photo std with objId = 4344 40 6 121 58 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 127 117 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 268 49 plFiberPlate : 138 possible sky positions to use as objects from a possible 533. plFiberPlate : 71 possible sky positions to use as objects from a possible 532. plFiberPlate : 48 possible sky positions to use as objects from a possible 531. plFiberPlate : 31 possible sky positions to use as objects from a possible 530. plFiberPlate : 20 possible sky positions to use as objects from a possible 529. plFiberPlate : 31 possible sky positions to use as objects from a possible 528. plFiberPlate : 39 possible sky positions to use as objects from a possible 527. plFiberPlate : 98 possible sky positions to use as objects from a possible 526. plFiberPlate : 87 possible sky positions to use as objects from a possible 525. plFiberPlate : 34 possible sky positions to use as objects from a possible 524. plFiberPlate : 24 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 14 possible sky positions to use as objects from a possible 520. plFiberPlate : 12 possible sky positions to use as objects from a possible 519. plFiberPlate : 15 possible sky positions to use as objects from a possible 518. plFiberPlate : 78 possible sky positions to use as objects from a possible 517. plFiberPlate : 56 possible sky positions to use as objects from a possible 516. plFiberPlate : 33 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 18 possible sky positions to use as objects from a possible 513. plFiberPlate : 15 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 4 possible sky positions to use as objects from a possible 510. plFiberPlate : 17 possible sky positions to use as objects from a possible 509. plFiberPlate : 44 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 5 possible sky positions to use as objects from a possible 506. plFiberPlate : 14 possible sky positions to use as objects from a possible 505. plFiberPlate : 5 possible sky positions to use as objects from a possible 504. plFiberPlate : 8 possible sky positions to use as objects from a possible 503. plFiberPlate : 16 possible sky positions to use as objects from a possible 502. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1746.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1747.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1747.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1748.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 126 2 6 105 3 12 86 4 13 98 5 18 109 6 7 65 7 5 66 8 9 105 9 10 95 10 15 157 11 4 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 279 11 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 136 31 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 281 64 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 133 102 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 281 69 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 281 45 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 292 44 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 283 88 plFiberPlate : 90 possible sky positions to use as objects from a possible 563. plFiberPlate : 73 possible sky positions to use as objects from a possible 562. plFiberPlate : 64 possible sky positions to use as objects from a possible 561. plFiberPlate : 30 possible sky positions to use as objects from a possible 560. plFiberPlate : 40 possible sky positions to use as objects from a possible 559. plFiberPlate : 49 possible sky positions to use as objects from a possible 558. plFiberPlate : 50 possible sky positions to use as objects from a possible 557. plFiberPlate : 81 possible sky positions to use as objects from a possible 556. plFiberPlate : 54 possible sky positions to use as objects from a possible 555. plFiberPlate : 30 possible sky positions to use as objects from a possible 554. plFiberPlate : 23 possible sky positions to use as objects from a possible 553. plFiberPlate : 13 possible sky positions to use as objects from a possible 552. plFiberPlate : 22 possible sky positions to use as objects from a possible 551. plFiberPlate : 23 possible sky positions to use as objects from a possible 550. plFiberPlate : 16 possible sky positions to use as objects from a possible 549. plFiberPlate : 35 possible sky positions to use as objects from a possible 548. plFiberPlate : 75 possible sky positions to use as objects from a possible 547. plFiberPlate : 45 possible sky positions to use as objects from a possible 546. plFiberPlate : 35 possible sky positions to use as objects from a possible 545. plFiberPlate : 25 possible sky positions to use as objects from a possible 544. plFiberPlate : 19 possible sky positions to use as objects from a possible 543. plFiberPlate : 21 possible sky positions to use as objects from a possible 542. plFiberPlate : 13 possible sky positions to use as objects from a possible 541. plFiberPlate : 7 possible sky positions to use as objects from a possible 540. plFiberPlate : 39 possible sky positions to use as objects from a possible 539. plFiberPlate : 55 possible sky positions to use as objects from a possible 538. plFiberPlate : 38 possible sky positions to use as objects from a possible 537. plFiberPlate : 11 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 6 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 16 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1747.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1748.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1748.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1749.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 127 2 11 99 3 12 90 4 7 104 5 8 110 6 5 55 7 9 70 8 13 115 9 10 102 10 21 157 11 13 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 158 74 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 299 17 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 148 70 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 149 38 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 309 38 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 302 9 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 155 32 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 156 86 plFiberPlate : 112 possible sky positions to use as objects from a possible 571. plFiberPlate : 79 possible sky positions to use as objects from a possible 570. plFiberPlate : 53 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 30 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 41 possible sky positions to use as objects from a possible 565. plFiberPlate : 82 possible sky positions to use as objects from a possible 564. plFiberPlate : 47 possible sky positions to use as objects from a possible 563. plFiberPlate : 30 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 11 possible sky positions to use as objects from a possible 560. plFiberPlate : 12 possible sky positions to use as objects from a possible 559. plFiberPlate : 13 possible sky positions to use as objects from a possible 558. plFiberPlate : 14 possible sky positions to use as objects from a possible 557. plFiberPlate : 34 possible sky positions to use as objects from a possible 556. plFiberPlate : 72 possible sky positions to use as objects from a possible 555. plFiberPlate : 47 possible sky positions to use as objects from a possible 554. plFiberPlate : 39 possible sky positions to use as objects from a possible 553. plFiberPlate : 26 possible sky positions to use as objects from a possible 552. plFiberPlate : 20 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 12 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 33 possible sky positions to use as objects from a possible 546. plFiberPlate : 36 possible sky positions to use as objects from a possible 545. plFiberPlate : 28 possible sky positions to use as objects from a possible 544. plFiberPlate : 10 possible sky positions to use as objects from a possible 543. plFiberPlate : 3 possible sky positions to use as objects from a possible 542. plFiberPlate : 16 possible sky positions to use as objects from a possible 541. plFiberPlate : 24 possible sky positions to use as objects from a possible 540. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1748.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1749.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1749.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1750.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 123 2 17 99 3 10 100 4 7 112 5 17 108 6 15 63 7 13 63 8 18 103 9 13 98 10 11 160 11 10 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 170 22 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 164 75 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 322 2 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 175 12 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 168 89 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 164 9 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 159 40 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 309 38 plFiberPlate : 120 possible sky positions to use as objects from a possible 561. plFiberPlate : 74 possible sky positions to use as objects from a possible 560. plFiberPlate : 49 possible sky positions to use as objects from a possible 559. plFiberPlate : 43 possible sky positions to use as objects from a possible 558. plFiberPlate : 20 possible sky positions to use as objects from a possible 557. plFiberPlate : 47 possible sky positions to use as objects from a possible 556. plFiberPlate : 39 possible sky positions to use as objects from a possible 555. plFiberPlate : 75 possible sky positions to use as objects from a possible 554. plFiberPlate : 66 possible sky positions to use as objects from a possible 553. plFiberPlate : 50 possible sky positions to use as objects from a possible 552. plFiberPlate : 35 possible sky positions to use as objects from a possible 551. plFiberPlate : 18 possible sky positions to use as objects from a possible 550. plFiberPlate : 15 possible sky positions to use as objects from a possible 549. plFiberPlate : 21 possible sky positions to use as objects from a possible 548. plFiberPlate : 27 possible sky positions to use as objects from a possible 547. plFiberPlate : 19 possible sky positions to use as objects from a possible 546. plFiberPlate : 43 possible sky positions to use as objects from a possible 545. plFiberPlate : 33 possible sky positions to use as objects from a possible 544. plFiberPlate : 24 possible sky positions to use as objects from a possible 543. plFiberPlate : 20 possible sky positions to use as objects from a possible 542. plFiberPlate : 14 possible sky positions to use as objects from a possible 541. plFiberPlate : 7 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 17 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 45 possible sky positions to use as objects from a possible 536. plFiberPlate : 30 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : 13 possible sky positions to use as objects from a possible 533. plFiberPlate : 11 possible sky positions to use as objects from a possible 532. plFiberPlate : 9 possible sky positions to use as objects from a possible 531. plFiberPlate : 10 possible sky positions to use as objects from a possible 530. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1749.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1750.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1750.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1751.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 111 2 9 102 3 9 86 4 9 115 5 15 127 6 9 80 7 7 67 8 5 91 9 12 104 10 17 148 11 10 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 328 41 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 175 12 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 185 18 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 326 6 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 178 12 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 176 153 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 179 63 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 335 44 plFiberPlate : 116 possible sky positions to use as objects from a possible 563. plFiberPlate : 64 possible sky positions to use as objects from a possible 562. plFiberPlate : 31 possible sky positions to use as objects from a possible 561. plFiberPlate : 15 possible sky positions to use as objects from a possible 560. plFiberPlate : 19 possible sky positions to use as objects from a possible 559. plFiberPlate : 29 possible sky positions to use as objects from a possible 558. plFiberPlate : 34 possible sky positions to use as objects from a possible 557. plFiberPlate : 85 possible sky positions to use as objects from a possible 556. plFiberPlate : 31 possible sky positions to use as objects from a possible 555. plFiberPlate : 13 possible sky positions to use as objects from a possible 554. plFiberPlate : 10 possible sky positions to use as objects from a possible 553. plFiberPlate : 8 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 13 possible sky positions to use as objects from a possible 550. plFiberPlate : 23 possible sky positions to use as objects from a possible 549. plFiberPlate : 6 possible sky positions to use as objects from a possible 548. plFiberPlate : 89 possible sky positions to use as objects from a possible 547. plFiberPlate : 30 possible sky positions to use as objects from a possible 546. plFiberPlate : 17 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 12 possible sky positions to use as objects from a possible 543. plFiberPlate : 11 possible sky positions to use as objects from a possible 542. plFiberPlate : 15 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 64 possible sky positions to use as objects from a possible 538. plFiberPlate : 33 possible sky positions to use as objects from a possible 537. plFiberPlate : 35 possible sky positions to use as objects from a possible 536. plFiberPlate : 11 possible sky positions to use as objects from a possible 535. plFiberPlate : 7 possible sky positions to use as objects from a possible 534. plFiberPlate : 12 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1750.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1751.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1751.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1752.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 119 2 17 106 3 10 79 4 5 100 5 10 122 6 9 72 7 5 71 8 8 121 9 8 105 10 11 140 11 12 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 345 26 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 343 45 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 199 28 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 194 90 plFiberPlate : adding spectro-photo std with objId = 4344 40 5 201 43 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 354 8 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 194 100 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 345 7 plFiberPlate : 86 possible sky positions to use as objects from a possible 585. plFiberPlate : 57 possible sky positions to use as objects from a possible 584. plFiberPlate : 51 possible sky positions to use as objects from a possible 583. plFiberPlate : 42 possible sky positions to use as objects from a possible 582. plFiberPlate : 38 possible sky positions to use as objects from a possible 581. plFiberPlate : 33 possible sky positions to use as objects from a possible 580. plFiberPlate : 83 possible sky positions to use as objects from a possible 579. plFiberPlate : 85 possible sky positions to use as objects from a possible 578. plFiberPlate : 42 possible sky positions to use as objects from a possible 577. plFiberPlate : 33 possible sky positions to use as objects from a possible 576. plFiberPlate : 19 possible sky positions to use as objects from a possible 575. plFiberPlate : 18 possible sky positions to use as objects from a possible 574. plFiberPlate : 19 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 31 possible sky positions to use as objects from a possible 571. plFiberPlate : 5 possible sky positions to use as objects from a possible 570. plFiberPlate : 74 possible sky positions to use as objects from a possible 569. plFiberPlate : 42 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 12 possible sky positions to use as objects from a possible 566. plFiberPlate : 9 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 13 possible sky positions to use as objects from a possible 563. plFiberPlate : 28 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 55 possible sky positions to use as objects from a possible 560. plFiberPlate : 21 possible sky positions to use as objects from a possible 559. plFiberPlate : 19 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 15 possible sky positions to use as objects from a possible 556. plFiberPlate : 18 possible sky positions to use as objects from a possible 555. plFiberPlate : 25 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1751.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1752.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1752.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1753.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 126 2 6 91 3 8 82 4 6 114 5 9 132 6 5 68 7 6 73 8 6 111 9 2 107 10 6 145 11 3 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 353 21 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 215 22 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 365 52 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 355 46 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 367 20 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 218 18 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 356 67 plFiberPlate : adding spectro-photo std with objId = 3631 40 3 354 8 plFiberPlate : 110 possible sky positions to use as objects from a possible 597. plFiberPlate : 72 possible sky positions to use as objects from a possible 596. plFiberPlate : 41 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : 30 possible sky positions to use as objects from a possible 593. plFiberPlate : 57 possible sky positions to use as objects from a possible 592. plFiberPlate : 39 possible sky positions to use as objects from a possible 591. plFiberPlate : 77 possible sky positions to use as objects from a possible 590. plFiberPlate : 49 possible sky positions to use as objects from a possible 589. plFiberPlate : 29 possible sky positions to use as objects from a possible 588. plFiberPlate : 9 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 23 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 19 possible sky positions to use as objects from a possible 582. plFiberPlate : 79 possible sky positions to use as objects from a possible 581. plFiberPlate : 58 possible sky positions to use as objects from a possible 580. plFiberPlate : 28 possible sky positions to use as objects from a possible 579. plFiberPlate : 15 possible sky positions to use as objects from a possible 578. plFiberPlate : 11 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 16 possible sky positions to use as objects from a possible 573. plFiberPlate : 45 possible sky positions to use as objects from a possible 572. plFiberPlate : 25 possible sky positions to use as objects from a possible 571. plFiberPlate : 19 possible sky positions to use as objects from a possible 570. plFiberPlate : 8 possible sky positions to use as objects from a possible 569. plFiberPlate : 10 possible sky positions to use as objects from a possible 568. plFiberPlate : 13 possible sky positions to use as objects from a possible 567. plFiberPlate : 27 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1752.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1753.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1753.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1754.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 109 2 14 82 3 9 92 4 5 127 5 9 114 6 8 54 7 5 67 8 7 91 9 4 97 10 12 139 11 12 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 229 31 plFiberPlate : adding spectro-photo std with objId = 4344 40 3 232 11 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 367 113 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 218 18 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 377 2 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 370 103 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 373 86 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 375 38 plFiberPlate : 135 possible sky positions to use as objects from a possible 545. plFiberPlate : 66 possible sky positions to use as objects from a possible 544. plFiberPlate : 24 possible sky positions to use as objects from a possible 543. plFiberPlate : 25 possible sky positions to use as objects from a possible 542. plFiberPlate : 19 possible sky positions to use as objects from a possible 541. plFiberPlate : 27 possible sky positions to use as objects from a possible 540. plFiberPlate : 32 possible sky positions to use as objects from a possible 539. plFiberPlate : 75 possible sky positions to use as objects from a possible 538. plFiberPlate : 24 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 1 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 4 possible sky positions to use as objects from a possible 533. plFiberPlate : 5 possible sky positions to use as objects from a possible 532. plFiberPlate : 8 possible sky positions to use as objects from a possible 531. plFiberPlate : 33 possible sky positions to use as objects from a possible 530. plFiberPlate : 70 possible sky positions to use as objects from a possible 529. plFiberPlate : 25 possible sky positions to use as objects from a possible 528. plFiberPlate : 13 possible sky positions to use as objects from a possible 527. plFiberPlate : 16 possible sky positions to use as objects from a possible 526. plFiberPlate : 7 possible sky positions to use as objects from a possible 525. plFiberPlate : 14 possible sky positions to use as objects from a possible 524. plFiberPlate : 10 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 9 possible sky positions to use as objects from a possible 521. plFiberPlate : 23 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 2 possible sky positions to use as objects from a possible 518. plFiberPlate : 4 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 15 possible sky positions to use as objects from a possible 515. plFiberPlate : 8 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1753.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1754.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1754.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.02.1/plPlugMapP-1755.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 85 2 9 105 3 6 90 4 9 105 5 10 117 6 7 72 7 6 48 8 4 47 9 12 91 10 11 145 11 8 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 1 380 33 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 379 80 plFiberPlate : adding spectro-photo std with objId = 4344 40 4 238 34 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 377 2 plFiberPlate : adding spectro-photo std with objId = 4344 40 1 234 5 plFiberPlate : adding spectro-photo std with objId = 4344 40 2 240 63 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 389 23 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 373 86 plFiberPlate : 106 possible sky positions to use as objects from a possible 474. plFiberPlate : 63 possible sky positions to use as objects from a possible 473. plFiberPlate : 49 possible sky positions to use as objects from a possible 472. plFiberPlate : 30 possible sky positions to use as objects from a possible 471. plFiberPlate : 27 possible sky positions to use as objects from a possible 470. plFiberPlate : 43 possible sky positions to use as objects from a possible 469. plFiberPlate : 45 possible sky positions to use as objects from a possible 468. plFiberPlate : 63 possible sky positions to use as objects from a possible 467. plFiberPlate : 71 possible sky positions to use as objects from a possible 466. plFiberPlate : 67 possible sky positions to use as objects from a possible 465. plFiberPlate : 58 possible sky positions to use as objects from a possible 464. plFiberPlate : 20 possible sky positions to use as objects from a possible 463. plFiberPlate : 15 possible sky positions to use as objects from a possible 462. plFiberPlate : 18 possible sky positions to use as objects from a possible 461. plFiberPlate : 13 possible sky positions to use as objects from a possible 460. plFiberPlate : 16 possible sky positions to use as objects from a possible 459. plFiberPlate : 81 possible sky positions to use as objects from a possible 458. plFiberPlate : 57 possible sky positions to use as objects from a possible 457. plFiberPlate : 36 possible sky positions to use as objects from a possible 456. plFiberPlate : 15 possible sky positions to use as objects from a possible 455. plFiberPlate : 12 possible sky positions to use as objects from a possible 454. plFiberPlate : 9 possible sky positions to use as objects from a possible 453. plFiberPlate : 4 possible sky positions to use as objects from a possible 452. plFiberPlate : 8 possible sky positions to use as objects from a possible 451. plFiberPlate : 8 possible sky positions to use as objects from a possible 450. plFiberPlate : 23 possible sky positions to use as objects from a possible 449. plFiberPlate : 20 possible sky positions to use as objects from a possible 448. plFiberPlate : 8 possible sky positions to use as objects from a possible 447. plFiberPlate : 13 possible sky positions to use as objects from a possible 446. plFiberPlate : 6 possible sky positions to use as objects from a possible 445. plFiberPlate : 5 possible sky positions to use as objects from a possible 444. plFiberPlate : 8 possible sky positions to use as objects from a possible 443. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 664 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1754.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1755.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.02.1/plOverlay-1755.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Jan 30 18:10:49 CST 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_137/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_137/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 18 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1738.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1738.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1738.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1739.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1739.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1739.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1740.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.8198,-6.8038) and (-11.06,-6.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1740.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1740.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1741.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1741.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1741.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1742.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3681,5.6801) and (11.72,4.49) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1742.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1742.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1743.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1743.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1743.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1744.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.1232,-9.8970) and (-6.88,-10.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1744.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1744.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1745.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.8633,6.7551) and (-11.08,6.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1745.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1745.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1746.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.9469,9.0988) and (10.34,7.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1746.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1746.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1747.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1259,2.8185) and (12.69,1.49) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1747.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1747.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1748.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1748.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1748.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1749.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1749.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1749.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1750.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1750.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1750.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1751.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1751.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1751.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1752.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.8894,6.4280) and (-11.74,5.03) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1752.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1752.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1753.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.6060,-5.1587) and (11.91,-4.39) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1753.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1753.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1754.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1754.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1754.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 2 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 2 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1755.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1755.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.02.1/plFanuc-1755.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Jan 30 18:11:36 CST 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_137/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_137/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8b817dc makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 18 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1738 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1739 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1740 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1741 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1742 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1743 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1744 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1745 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1746 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1747 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1748 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1749 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1750 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1751 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1752 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1753 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1754 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1755 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 664 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Jan 30 18:11:50 CST 2004 Begin running "plateEnder dr2004.02.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_137/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_137/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.02.1 -morePipes 1" failed. PS: Read file for stderr output of this job.