Sender: LSF System Subject: Job 34346: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Oct 4 13:26:35 2001 Results reported at Thu Oct 4 13:32:47 2001 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v11_7 -f OSF1 -z /p/cluster_disk/upsdb setup plate v3_5 -f OSF1 -z /p/cluster_disk/upsdb echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2001.10.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 340.71 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Oct 4 13:26:37 CDT 2001 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Oct 4 13:26:39 CDT 2001 PATH = /p/OSF1/tclx/v7_4ad/bin:/p/OSF1/tk/v4_0d/bin:/p/OSF1/tcl/v7_4d/bin:/p/OSF1/fsao/v3_14/bin:/p/OSF1/encp/v2_12:/p/OSF1/ktools/v1_4/bin:/p/OSF1/lsfadm/lsf/v3_2/ALPHA/bin:/p/OSF1/postgres/postgresql-6.5.3/bin:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_5_3OSF1-V4/bin:/home/s1/jen_a/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/p/OSF1/ssc/v4_12/bin:/p/OSF1/astrom/v3_5/bin:/p/OSF1/photo/v5_2_26/bin:/p/OSF1/mt/v7_4/bin:/p/OSF1/ghostview/v4_0b/bin:/p/OSF1/dp/v11_7/bin:/p/OSF1/fpgplot/v1_7/bin:/p/OSF1/pgplot/v5_1_1/dst:/p/OSF1/sdsstools/v4_11/bin:/p/OSF1/ftcl/v3_3/bin:/p/OSF1/ncurses/v1_1/bin:/p/OSF1/dervish/v8_1/bin:/p/OSF1/sdssmath/v5_2/bin:/p/OSF1/astrotools/v5_4/bin:/p/OSF1/plate/v3_5/bin --------------------------------------------------------------- Thu Oct 4 13:26:39 CDT 2001 ASTROM_DIR=/p/OSF1/astrom/v3_5 ASTROTOOLS_DIR=/p/OSF1/astrotools/v5_4 DERVISH_DIR=/p/OSF1/dervish/v8_1 DP_DIR=/p/OSF1/dp/v11_7 DUST_DIR=/p/IRIX6/dust/v1_0 ENCP_DIR=/p/OSF1/encp/v2_12 FFTW_DIR=/p/OSF1/fftw/v1_2 FPGPLOT_DIR=/p/OSF1/fpgplot/v1_7 FSAO_DIR=/p/OSF1/fsao/v3_14 FSLALIB_DIR=/p/OSF1/fslalib/v2_1_2a FTCL_DIR=/p/OSF1/ftcl/v3_3 GHOSTVIEW_DIR=/p/OSF1/ghostview/v4_0b INFO_DIR=/fnal/ups/prd/Info/v1_6 INT_DIR=/p/OSF1/dervish/v8_1/doc/www/dervish.home.html KTOOLS_DIR=/p/OSF1/ktools/v1_4 LAPACK_DIR=/p/OSF1/lapack/v2_0 LIBFITS_DIR=/p/OSF1/libfits/v2_2 LSF_DIR=/p/OSF1/lsfadm/lsf/v3_2/ALPHA MTSTDS_DIR=/p/GENERIC_UNIX/mtstds/v3_2 MT_DIR=/p/OSF1/mt/v7_4 NCURSES_DIR=/p/OSF1/ncurses/v1_1 NFCALIB_DIR=/p/GENERIC_UNIX/nfcalib/v1_8_2 PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/p/OSF1/pgplot/v5_1_1 PHOTO_DIR=/p/OSF1/photo/v5_2_26 PLATE_DIR=/p/OSF1/plate/v3_5 POSTGRES_DIR=/p/OSF1/postgres/postgresql-6.5.3 SDSSMATH_DIR=/p/OSF1/sdssmath/v5_2 SDSSTOOLS_DIR=/p/OSF1/sdsstools/v4_11 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/p/OSF1/slalib/v2_1_2a SLATEC_DIR=/p/OSF1/slatec/v0_9 SSC_DIR=/p/OSF1/ssc/v4_12 TCLX_DIR=/p/OSF1/tclx/v7_4ad TCL_DIR=/p/OSF1/tcl/v7_4d TK_DIR=/p/OSF1/tk/v4_0d TYCHO2_DIR=/p/IRIX6/tycho2/v1_0 UCAC_DIR=/p/OSF1/ucac/v0_7 UPS_DIR=/fnal/ups/prd/ups/v4_5_3OSF1-V4 --------------------------------------------------------------- Thu Oct 4 13:26:39 CDT 2001 Begin running plate --------------------------------------------------------------- Thu Oct 4 13:26:39 CDT 2001 Begin running makePlates -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e03fe8 makePlates : beginning loop over plObs chain; makePlates : making 27 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0539.par makePlates : plateInfo struct for plate 727 : (h2).mjd 52504 (h2).raCen 316.428 (h2).decCen 10.0822 (h2).haCen -16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 316.428 10.082 316.428 11.582 plMakePlateFromTile : mjd of obs : 52504.632850 Observed HA/dec of plate center, fiducial point (deg) : -16.002 10.100 -16.002 11.600 The rotation angle of the fid. point is 30.632369 plMakePlateFromTile : beginning loop over 1129 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0538.par makePlates : plateInfo struct for plate 728 : (h2).mjd 52504 (h2).raCen 317.979 (h2).decCen 10.3537 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 317.979 10.354 317.979 11.854 plMakePlateFromTile : mjd of obs : 52504.714732 Observed HA/dec of plate center, fiducial point (deg) : 11.998 10.372 11.998 11.871 The rotation angle of the fid. point is -24.451946 plMakePlateFromTile : beginning loop over 1270 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0537.par makePlates : plateInfo struct for plate 729 : (h2).mjd 52504 (h2).raCen 319.676 (h2).decCen 10.6742 (h2).haCen 10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 319.676 10.674 319.676 12.174 plMakePlateFromTile : mjd of obs : 52504.713891 Observed HA/dec of plate center, fiducial point (deg) : 9.998 10.692 9.998 12.192 The rotation angle of the fid. point is -21.102140 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (51.14, -250.40, 8.1) and (51.14, -250.25, 7.5) checkLTHo : distance = 0.155, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(51.14, -250.40, 8.1) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0536.par makePlates : plateInfo struct for plate 730 : (h2).mjd 52504 (h2).raCen 321.495 (h2).decCen 10.9998 (h2).haCen 8 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 321.495 11.000 321.495 12.500 plMakePlateFromTile : mjd of obs : 52504.713389 Observed HA/dec of plate center, fiducial point (deg) : 7.998 11.018 7.998 12.517 The rotation angle of the fid. point is -17.450047 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0535.par makePlates : plateInfo struct for plate 731 : (h2).mjd 52504 (h2).raCen 323.475 (h2).decCen 11.3884 (h2).haCen 6 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 323.475 11.388 323.475 12.888 plMakePlateFromTile : mjd of obs : 52504.713332 Observed HA/dec of plate center, fiducial point (deg) : 5.998 11.407 5.998 12.906 The rotation angle of the fid. point is -13.527508 plMakePlateFromTile : beginning loop over 1351 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0534.par makePlates : plateInfo struct for plate 732 : (h2).mjd 52504 (h2).raCen 325.514 (h2).decCen 11.6473 (h2).haCen 4 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 325.514 11.647 325.514 13.147 plMakePlateFromTile : mjd of obs : 52504.713438 Observed HA/dec of plate center, fiducial point (deg) : 3.998 11.666 3.998 13.165 The rotation angle of the fid. point is -9.238290 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0533.par makePlates : plateInfo struct for plate 733 : (h2).mjd 52504 (h2).raCen 327.715 (h2).decCen 11.989 (h2).haCen 17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 327.715 11.989 327.715 13.489 plMakePlateFromTile : mjd of obs : 52504.755558 Observed HA/dec of plate center, fiducial point (deg) : 16.998 12.008 16.998 13.507 The rotation angle of the fid. point is -34.160413 plMakePlateFromTile : beginning loop over 1386 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0532.par makePlates : plateInfo struct for plate 734 : (h2).mjd 52504 (h2).raCen 330.025 (h2).decCen 12.329 (h2).haCen 14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 330.025 12.329 330.025 13.829 plMakePlateFromTile : mjd of obs : 52504.753644 Observed HA/dec of plate center, fiducial point (deg) : 13.998 12.348 13.998 13.847 The rotation angle of the fid. point is -29.852450 plMakePlateFromTile : beginning loop over 1405 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0531.par makePlates : plateInfo struct for plate 735 : (h2).mjd 52504 (h2).raCen 332.056 (h2).decCen 12.6875 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 332.056 12.688 332.056 14.188 plMakePlateFromTile : mjd of obs : 52504.753729 Observed HA/dec of plate center, fiducial point (deg) : 11.998 12.706 11.998 14.206 The rotation angle of the fid. point is -26.720885 plMakePlateFromTile : beginning loop over 1418 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-203.76, 209.77, 7.7) and (-203.76, 209.79, 7.9) checkLTHo : distance = 0.022, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-203.76, 209.79, 7.9) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0530.par makePlates : plateInfo struct for plate 736 : (h2).mjd 52504 (h2).raCen 334.005 (h2).decCen 12.9506 (h2).haCen 10 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 334.005 12.951 334.005 14.451 plMakePlateFromTile : mjd of obs : 52504.753586 Observed HA/dec of plate center, fiducial point (deg) : 9.998 12.969 9.998 14.469 The rotation angle of the fid. point is -23.131406 plMakePlateFromTile : beginning loop over 1414 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0529.par makePlates : plateInfo struct for plate 737 : (h2).mjd 52504 (h2).raCen 336.146 (h2).decCen 13.1768 (h2).haCen 8 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 336.146 13.177 336.146 14.677 plMakePlateFromTile : mjd of obs : 52504.753975 Observed HA/dec of plate center, fiducial point (deg) : 7.998 13.196 7.998 14.695 The rotation angle of the fid. point is -19.144353 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0528.par makePlates : plateInfo struct for plate 738 : (h2).mjd 52504 (h2).raCen 338.089 (h2).decCen 13.4689 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 338.089 13.469 338.089 14.969 plMakePlateFromTile : mjd of obs : 52504.795380 Observed HA/dec of plate center, fiducial point (deg) : 20.998 13.488 20.998 14.988 The rotation angle of the fid. point is -41.266175 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0527.par makePlates : plateInfo struct for plate 739 : (h2).mjd 52504 (h2).raCen 340.103 (h2).decCen 13.6545 (h2).haCen 19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 340.103 13.655 340.103 15.155 plMakePlateFromTile : mjd of obs : 52504.795417 Observed HA/dec of plate center, fiducial point (deg) : 18.998 13.674 18.998 15.173 The rotation angle of the fid. point is -38.991192 plMakePlateFromTile : beginning loop over 1354 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0526.par makePlates : plateInfo struct for plate 740 : (h2).mjd 52504 (h2).raCen 341.871 (h2).decCen 13.8581 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 341.871 13.858 341.871 15.358 plMakePlateFromTile : mjd of obs : 52504.797544 Observed HA/dec of plate center, fiducial point (deg) : 17.998 13.878 17.998 15.377 The rotation angle of the fid. point is -37.893508 plMakePlateFromTile : beginning loop over 1356 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0525.par makePlates : plateInfo struct for plate 741 : (h2).mjd 52504 (h2).raCen 343.542 (h2).decCen 14.0285 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 343.542 14.028 343.542 15.529 plMakePlateFromTile : mjd of obs : 52504.796631 Observed HA/dec of plate center, fiducial point (deg) : 15.998 14.048 15.998 15.547 The rotation angle of the fid. point is -35.156471 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0524.par makePlates : plateInfo struct for plate 742 : (h2).mjd 52504 (h2).raCen 345.213 (h2).decCen 14.168 (h2).haCen 14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 345.213 14.168 345.213 15.668 plMakePlateFromTile : mjd of obs : 52504.795719 Observed HA/dec of plate center, fiducial point (deg) : 13.998 14.187 13.998 15.687 The rotation angle of the fid. point is -32.042387 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0523.par makePlates : plateInfo struct for plate 743 : (h2).mjd 52504 (h2).raCen 347.054 (h2).decCen 14.2863 (h2).haCen 12 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 347.054 14.286 347.054 15.786 plMakePlateFromTile : mjd of obs : 52504.795277 Observed HA/dec of plate center, fiducial point (deg) : 11.998 14.306 11.998 15.805 The rotation angle of the fid. point is -28.537654 plMakePlateFromTile : beginning loop over 1322 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0522.par makePlates : plateInfo struct for plate 744 : (h2).mjd 52504 (h2).raCen 348.74 (h2).decCen 14.3987 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 348.740 14.399 348.740 15.899 plMakePlateFromTile : mjd of obs : 52504.838741 Observed HA/dec of plate center, fiducial point (deg) : 25.998 14.419 25.998 15.918 The rotation angle of the fid. point is -47.630663 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0521.par makePlates : plateInfo struct for plate 745 : (h2).mjd 52504 (h2).raCen 350.411 (h2).decCen 14.5499 (h2).haCen 24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 350.411 14.550 350.411 16.050 plMakePlateFromTile : mjd of obs : 52504.837828 Observed HA/dec of plate center, fiducial point (deg) : 23.998 14.570 23.998 16.069 The rotation angle of the fid. point is -45.952088 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0520.par makePlates : plateInfo struct for plate 746 : (h2).mjd 52504 (h2).raCen 352.251 (h2).decCen 14.6333 (h2).haCen 22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 352.251 14.633 352.251 16.133 plMakePlateFromTile : mjd of obs : 52504.837383 Observed HA/dec of plate center, fiducial point (deg) : 21.998 14.653 21.998 16.153 The rotation angle of the fid. point is -43.958540 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0519.par makePlates : plateInfo struct for plate 747 : (h2).mjd 52504 (h2).raCen 354.336 (h2).decCen 14.7626 (h2).haCen 20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 354.336 14.763 354.336 16.263 plMakePlateFromTile : mjd of obs : 52504.837617 Observed HA/dec of plate center, fiducial point (deg) : 19.998 14.782 19.998 16.282 The rotation angle of the fid. point is -41.771754 plMakePlateFromTile : beginning loop over 1344 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0518.par makePlates : plateInfo struct for plate 748 : (h2).mjd 52504 (h2).raCen 356.196 (h2).decCen 14.8232 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 356.196 14.823 356.196 16.323 plMakePlateFromTile : mjd of obs : 52504.837228 Observed HA/dec of plate center, fiducial point (deg) : 17.998 14.843 17.998 16.342 The rotation angle of the fid. point is -39.201201 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0517.par makePlates : plateInfo struct for plate 749 : (h2).mjd 52504 (h2).raCen 358.123 (h2).decCen 14.9058 (h2).haCen 31 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 358.123 14.906 358.123 16.406 plMakePlateFromTile : mjd of obs : 52504.878589 Observed HA/dec of plate center, fiducial point (deg) : 30.998 14.926 30.998 16.426 The rotation angle of the fid. point is -52.064972 plMakePlateFromTile : beginning loop over 1343 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0516.par makePlates : plateInfo struct for plate 750 : (h2).mjd 52504 (h2).raCen 359.707 (h2).decCen 14.9256 (h2).haCen 30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 359.707 14.926 359.707 16.426 plMakePlateFromTile : mjd of obs : 52504.880206 Observed HA/dec of plate center, fiducial point (deg) : 29.998 14.946 29.998 16.445 The rotation angle of the fid. point is -51.421810 plMakePlateFromTile : beginning loop over 1340 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0515.par makePlates : plateInfo struct for plate 751 : (h2).mjd 52504 (h2).raCen 1.48513 (h2).decCen 14.9725 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 1.485 14.973 1.485 16.473 plMakePlateFromTile : mjd of obs : 52503.882320 Observed HA/dec of plate center, fiducial point (deg) : 27.998 14.993 27.998 16.492 The rotation angle of the fid. point is -50.020348 plMakePlateFromTile : beginning loop over 1318 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0514.par makePlates : plateInfo struct for plate 752 : (h2).mjd 52504 (h2).raCen 3.53942 (h2).decCen 14.9945 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 3.539 14.995 3.539 16.494 plMakePlateFromTile : mjd of obs : 52503.882469 Observed HA/dec of plate center, fiducial point (deg) : 25.998 15.014 25.998 16.514 The rotation angle of the fid. point is -48.402731 plMakePlateFromTile : beginning loop over 1313 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk24/complete//plPlugMapT-0513.par makePlates : plateInfo struct for plate 753 : (h2).mjd 52504 (h2).raCen 5.79078 (h2).decCen 15.0195 (h2).haCen 24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 13 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 5.791 15.020 5.791 16.520 plMakePlateFromTile : mjd of obs : 52503.883163 Observed HA/dec of plate center, fiducial point (deg) : 23.998 15.039 23.998 16.539 The rotation angle of the fid. point is -46.579895 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Oct 4 13:27:56 CDT 2001 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 27 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0727.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 73 2 18 51 3 15 27 4 15 16 5 15 24 6 13 34 7 17 42 8 15 45 9 15 54 10 45 70 11 36 67 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 26 113 plFiberPlate : adding spectro-photo std with objId = 1749 0 2 94 200 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 16 262 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 14 243 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 27 176 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 15 218 plFiberPlate : adding spectro-photo std with objId = 1749 0 2 96 269 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 15 82 plFiberPlate : 37 possible sky positions to use as objects from a possible 231. plFiberPlate : 23 possible sky positions to use as objects from a possible 230. plFiberPlate : 12 possible sky positions to use as objects from a possible 229. plFiberPlate : 2 possible sky positions to use as objects from a possible 228. plFiberPlate : 10 possible sky positions to use as objects from a possible 227. plFiberPlate : 15 possible sky positions to use as objects from a possible 226. plFiberPlate : 34 possible sky positions to use as objects from a possible 225. plFiberPlate : 21 possible sky positions to use as objects from a possible 224. plFiberPlate : 17 possible sky positions to use as objects from a possible 223. plFiberPlate : 11 possible sky positions to use as objects from a possible 222. plFiberPlate : 8 possible sky positions to use as objects from a possible 221. plFiberPlate : 2 possible sky positions to use as objects from a possible 220. plFiberPlate : 15 possible sky positions to use as objects from a possible 219. plFiberPlate : 10 possible sky positions to use as objects from a possible 218. plFiberPlate : 11 possible sky positions to use as objects from a possible 217. plFiberPlate : 9 possible sky positions to use as objects from a possible 216. plFiberPlate : 26 possible sky positions to use as objects from a possible 215. plFiberPlate : 17 possible sky positions to use as objects from a possible 214. plFiberPlate : 18 possible sky positions to use as objects from a possible 213. plFiberPlate : 17 possible sky positions to use as objects from a possible 212. plFiberPlate : 13 possible sky positions to use as objects from a possible 211. plFiberPlate : 9 possible sky positions to use as objects from a possible 210. plFiberPlate : 6 possible sky positions to use as objects from a possible 209. plFiberPlate : 6 possible sky positions to use as objects from a possible 208. plFiberPlate : 14 possible sky positions to use as objects from a possible 207. plFiberPlate : 5 possible sky positions to use as objects from a possible 206. plFiberPlate : 5 possible sky positions to use as objects from a possible 205. plFiberPlate : 5 possible sky positions to use as objects from a possible 204. plFiberPlate : 4 possible sky positions to use as objects from a possible 203. plFiberPlate : 5 possible sky positions to use as objects from a possible 202. plFiberPlate : 7 possible sky positions to use as objects from a possible 201. plFiberPlate : 11 possible sky positions to use as objects from a possible 200. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0727.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0727.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0728.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 68 2 20 43 3 24 55 4 26 64 5 17 47 6 14 34 7 16 46 8 25 63 9 14 59 10 32 82 11 31 59 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 33 154 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 25 277 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 20 166 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 35 153 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 34 131 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 33 28 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 33 84 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 35 95 plFiberPlate : 69 possible sky positions to use as objects from a possible 308. plFiberPlate : 36 possible sky positions to use as objects from a possible 307. plFiberPlate : 9 possible sky positions to use as objects from a possible 306. plFiberPlate : 16 possible sky positions to use as objects from a possible 305. plFiberPlate : 20 possible sky positions to use as objects from a possible 304. plFiberPlate : 10 possible sky positions to use as objects from a possible 303. plFiberPlate : 17 possible sky positions to use as objects from a possible 302. plFiberPlate : 51 possible sky positions to use as objects from a possible 301. plFiberPlate : 32 possible sky positions to use as objects from a possible 300. plFiberPlate : 18 possible sky positions to use as objects from a possible 299. plFiberPlate : 10 possible sky positions to use as objects from a possible 298. plFiberPlate : 7 possible sky positions to use as objects from a possible 297. plFiberPlate : 6 possible sky positions to use as objects from a possible 296. plFiberPlate : 12 possible sky positions to use as objects from a possible 295. plFiberPlate : 20 possible sky positions to use as objects from a possible 294. plFiberPlate : 12 possible sky positions to use as objects from a possible 293. plFiberPlate : 37 possible sky positions to use as objects from a possible 292. plFiberPlate : 30 possible sky positions to use as objects from a possible 291. plFiberPlate : 12 possible sky positions to use as objects from a possible 290. plFiberPlate : 10 possible sky positions to use as objects from a possible 289. plFiberPlate : 7 possible sky positions to use as objects from a possible 288. plFiberPlate : 8 possible sky positions to use as objects from a possible 287. plFiberPlate : 3 possible sky positions to use as objects from a possible 286. plFiberPlate : 11 possible sky positions to use as objects from a possible 285. plFiberPlate : 8 possible sky positions to use as objects from a possible 284. plFiberPlate : 4 possible sky positions to use as objects from a possible 283. plFiberPlate : 4 possible sky positions to use as objects from a possible 282. plFiberPlate : 3 possible sky positions to use as objects from a possible 281. plFiberPlate : 0 possible sky positions to use as objects from a possible 280. plFiberPlate: No sky found for bundle at -8.920 223.149, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 280. plFiberPlate : 4 possible sky positions to use as objects from a possible 279. plFiberPlate : 14 possible sky positions to use as objects from a possible 278. plFiberPlate : 5 possible sky positions to use as objects from a possible 277. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0727.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0728.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0728.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0729.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 87 2 20 56 3 25 41 4 28 58 5 24 81 6 26 55 7 23 53 8 23 78 9 19 75 10 38 96 11 26 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 46 329 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 38 34 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 32 135 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 36 142 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 33 28 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 31 223 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 38 205 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 40 129 plFiberPlate : 67 possible sky positions to use as objects from a possible 366. plFiberPlate : 32 possible sky positions to use as objects from a possible 365. plFiberPlate : 28 possible sky positions to use as objects from a possible 364. plFiberPlate : 25 possible sky positions to use as objects from a possible 363. plFiberPlate : 20 possible sky positions to use as objects from a possible 362. plFiberPlate : 27 possible sky positions to use as objects from a possible 361. plFiberPlate : 37 possible sky positions to use as objects from a possible 360. plFiberPlate : 51 possible sky positions to use as objects from a possible 359. plFiberPlate : 33 possible sky positions to use as objects from a possible 358. plFiberPlate : 16 possible sky positions to use as objects from a possible 357. plFiberPlate : 7 possible sky positions to use as objects from a possible 356. plFiberPlate : 3 possible sky positions to use as objects from a possible 355. plFiberPlate : 7 possible sky positions to use as objects from a possible 354. plFiberPlate : 19 possible sky positions to use as objects from a possible 353. plFiberPlate : 21 possible sky positions to use as objects from a possible 352. plFiberPlate : 15 possible sky positions to use as objects from a possible 351. plFiberPlate : 39 possible sky positions to use as objects from a possible 350. plFiberPlate : 25 possible sky positions to use as objects from a possible 349. plFiberPlate : 18 possible sky positions to use as objects from a possible 348. plFiberPlate : 10 possible sky positions to use as objects from a possible 347. plFiberPlate : 7 possible sky positions to use as objects from a possible 346. plFiberPlate : 9 possible sky positions to use as objects from a possible 345. plFiberPlate : 6 possible sky positions to use as objects from a possible 344. plFiberPlate : 13 possible sky positions to use as objects from a possible 343. plFiberPlate : 15 possible sky positions to use as objects from a possible 342. plFiberPlate : 35 possible sky positions to use as objects from a possible 341. plFiberPlate : 21 possible sky positions to use as objects from a possible 340. plFiberPlate : 21 possible sky positions to use as objects from a possible 339. plFiberPlate : 10 possible sky positions to use as objects from a possible 338. plFiberPlate : 10 possible sky positions to use as objects from a possible 337. plFiberPlate : 5 possible sky positions to use as objects from a possible 336. plFiberPlate : 23 possible sky positions to use as objects from a possible 335. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 682 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0728.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0729.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0729.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0730.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 67 2 26 45 3 26 63 4 37 87 5 23 93 6 14 53 7 21 60 8 25 77 9 22 80 10 44 100 11 29 63 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 52 56 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 59 158 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 60 138 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 61 172 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 65 95 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 53 160 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 56 33 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 61 70 plFiberPlate : 92 possible sky positions to use as objects from a possible 396. plFiberPlate : 29 possible sky positions to use as objects from a possible 395. plFiberPlate : 16 possible sky positions to use as objects from a possible 394. plFiberPlate : 19 possible sky positions to use as objects from a possible 393. plFiberPlate : 10 possible sky positions to use as objects from a possible 392. plFiberPlate : 11 possible sky positions to use as objects from a possible 391. plFiberPlate : 14 possible sky positions to use as objects from a possible 390. plFiberPlate : 69 possible sky positions to use as objects from a possible 389. plFiberPlate : 25 possible sky positions to use as objects from a possible 388. plFiberPlate : 12 possible sky positions to use as objects from a possible 387. plFiberPlate : 8 possible sky positions to use as objects from a possible 386. plFiberPlate : 3 possible sky positions to use as objects from a possible 385. plFiberPlate : 5 possible sky positions to use as objects from a possible 384. plFiberPlate : 12 possible sky positions to use as objects from a possible 383. plFiberPlate : 6 possible sky positions to use as objects from a possible 382. plFiberPlate : 7 possible sky positions to use as objects from a possible 381. plFiberPlate : 60 possible sky positions to use as objects from a possible 380. plFiberPlate : 36 possible sky positions to use as objects from a possible 379. plFiberPlate : 13 possible sky positions to use as objects from a possible 378. plFiberPlate : 8 possible sky positions to use as objects from a possible 377. plFiberPlate : 13 possible sky positions to use as objects from a possible 376. plFiberPlate : 9 possible sky positions to use as objects from a possible 375. plFiberPlate : 7 possible sky positions to use as objects from a possible 374. plFiberPlate : 7 possible sky positions to use as objects from a possible 373. plFiberPlate : 12 possible sky positions to use as objects from a possible 372. plFiberPlate : 22 possible sky positions to use as objects from a possible 371. plFiberPlate : 15 possible sky positions to use as objects from a possible 370. plFiberPlate : 13 possible sky positions to use as objects from a possible 369. plFiberPlate : 8 possible sky positions to use as objects from a possible 368. plFiberPlate : 4 possible sky positions to use as objects from a possible 367. plFiberPlate : 10 possible sky positions to use as objects from a possible 366. plFiberPlate : 12 possible sky positions to use as objects from a possible 365. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0729.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0730.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0730.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0731.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 39 87 2 24 61 3 27 57 4 39 88 5 26 93 6 17 51 7 11 57 8 9 86 9 12 76 10 44 98 11 35 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 70 107 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 61 172 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 65 95 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 76 93 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 69 55 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 69 105 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 64 122 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 67 86 plFiberPlate : 99 possible sky positions to use as objects from a possible 429. plFiberPlate : 38 possible sky positions to use as objects from a possible 428. plFiberPlate : 14 possible sky positions to use as objects from a possible 427. plFiberPlate : 13 possible sky positions to use as objects from a possible 426. plFiberPlate : 20 possible sky positions to use as objects from a possible 425. plFiberPlate : 23 possible sky positions to use as objects from a possible 424. plFiberPlate : 28 possible sky positions to use as objects from a possible 423. plFiberPlate : 75 possible sky positions to use as objects from a possible 422. plFiberPlate : 25 possible sky positions to use as objects from a possible 421. plFiberPlate : 15 possible sky positions to use as objects from a possible 420. plFiberPlate : 4 possible sky positions to use as objects from a possible 419. plFiberPlate : 11 possible sky positions to use as objects from a possible 418. plFiberPlate : 12 possible sky positions to use as objects from a possible 417. plFiberPlate : 14 possible sky positions to use as objects from a possible 416. plFiberPlate : 3 possible sky positions to use as objects from a possible 415. plFiberPlate : 18 possible sky positions to use as objects from a possible 414. plFiberPlate : 64 possible sky positions to use as objects from a possible 413. plFiberPlate : 25 possible sky positions to use as objects from a possible 412. plFiberPlate : 8 possible sky positions to use as objects from a possible 411. plFiberPlate : 2 possible sky positions to use as objects from a possible 410. plFiberPlate : 2 possible sky positions to use as objects from a possible 409. plFiberPlate : 13 possible sky positions to use as objects from a possible 408. plFiberPlate : 5 possible sky positions to use as objects from a possible 407. plFiberPlate : 10 possible sky positions to use as objects from a possible 406. plFiberPlate : 22 possible sky positions to use as objects from a possible 405. plFiberPlate : 31 possible sky positions to use as objects from a possible 404. plFiberPlate : 30 possible sky positions to use as objects from a possible 403. plFiberPlate : 19 possible sky positions to use as objects from a possible 402. plFiberPlate : 5 possible sky positions to use as objects from a possible 401. plFiberPlate : 14 possible sky positions to use as objects from a possible 400. plFiberPlate : 5 possible sky positions to use as objects from a possible 399. plFiberPlate : 26 possible sky positions to use as objects from a possible 398. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 683 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0730.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0731.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0731.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0732.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 115 2 13 63 3 17 59 4 28 87 5 7 100 6 10 70 7 13 75 8 13 104 9 14 94 10 32 126 11 22 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 81 59 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 74 143 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 79 146 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 76 93 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 83 367 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 78 31 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 90 41 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 69 105 plFiberPlate : 98 possible sky positions to use as objects from a possible 498. plFiberPlate : 57 possible sky positions to use as objects from a possible 497. plFiberPlate : 43 possible sky positions to use as objects from a possible 496. plFiberPlate : 37 possible sky positions to use as objects from a possible 495. plFiberPlate : 24 possible sky positions to use as objects from a possible 494. plFiberPlate : 37 possible sky positions to use as objects from a possible 493. plFiberPlate : 65 possible sky positions to use as objects from a possible 492. plFiberPlate : 63 possible sky positions to use as objects from a possible 491. plFiberPlate : 49 possible sky positions to use as objects from a possible 490. plFiberPlate : 40 possible sky positions to use as objects from a possible 489. plFiberPlate : 26 possible sky positions to use as objects from a possible 488. plFiberPlate : 11 possible sky positions to use as objects from a possible 487. plFiberPlate : 22 possible sky positions to use as objects from a possible 486. plFiberPlate : 11 possible sky positions to use as objects from a possible 485. plFiberPlate : 17 possible sky positions to use as objects from a possible 484. plFiberPlate : 40 possible sky positions to use as objects from a possible 483. plFiberPlate : 80 possible sky positions to use as objects from a possible 482. plFiberPlate : 59 possible sky positions to use as objects from a possible 481. plFiberPlate : 42 possible sky positions to use as objects from a possible 480. plFiberPlate : 35 possible sky positions to use as objects from a possible 479. plFiberPlate : 19 possible sky positions to use as objects from a possible 478. plFiberPlate : 15 possible sky positions to use as objects from a possible 477. plFiberPlate : 16 possible sky positions to use as objects from a possible 476. plFiberPlate : 13 possible sky positions to use as objects from a possible 475. plFiberPlate : 39 possible sky positions to use as objects from a possible 474. plFiberPlate : 26 possible sky positions to use as objects from a possible 473. plFiberPlate : 24 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 13 possible sky positions to use as objects from a possible 470. plFiberPlate : 5 possible sky positions to use as objects from a possible 469. plFiberPlate : 6 possible sky positions to use as objects from a possible 468. plFiberPlate : 19 possible sky positions to use as objects from a possible 467. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0731.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0732.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0732.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0733.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 88 2 17 59 3 20 67 4 17 98 5 11 105 6 17 65 7 16 73 8 12 109 9 21 100 10 33 119 11 18 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 92 119 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 84 118 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 105 48 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 95 12 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 95 51 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 90 41 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 99 49 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 100 100 plFiberPlate : 116 possible sky positions to use as objects from a possible 488. plFiberPlate : 72 possible sky positions to use as objects from a possible 487. plFiberPlate : 42 possible sky positions to use as objects from a possible 486. plFiberPlate : 22 possible sky positions to use as objects from a possible 485. plFiberPlate : 25 possible sky positions to use as objects from a possible 484. plFiberPlate : 26 possible sky positions to use as objects from a possible 483. plFiberPlate : 33 possible sky positions to use as objects from a possible 482. plFiberPlate : 73 possible sky positions to use as objects from a possible 481. plFiberPlate : 45 possible sky positions to use as objects from a possible 480. plFiberPlate : 35 possible sky positions to use as objects from a possible 479. plFiberPlate : 20 possible sky positions to use as objects from a possible 478. plFiberPlate : 8 possible sky positions to use as objects from a possible 477. plFiberPlate : 6 possible sky positions to use as objects from a possible 476. plFiberPlate : 9 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 23 possible sky positions to use as objects from a possible 473. plFiberPlate : 63 possible sky positions to use as objects from a possible 472. plFiberPlate : 37 possible sky positions to use as objects from a possible 471. plFiberPlate : 26 possible sky positions to use as objects from a possible 470. plFiberPlate : 20 possible sky positions to use as objects from a possible 469. plFiberPlate : 16 possible sky positions to use as objects from a possible 468. plFiberPlate : 8 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 12 possible sky positions to use as objects from a possible 465. plFiberPlate : 28 possible sky positions to use as objects from a possible 464. plFiberPlate : 34 possible sky positions to use as objects from a possible 463. plFiberPlate : 31 possible sky positions to use as objects from a possible 462. plFiberPlate : 20 possible sky positions to use as objects from a possible 461. plFiberPlate : 15 possible sky positions to use as objects from a possible 460. plFiberPlate : 9 possible sky positions to use as objects from a possible 459. plFiberPlate : 14 possible sky positions to use as objects from a possible 458. plFiberPlate : 13 possible sky positions to use as objects from a possible 457. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0732.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0733.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0733.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0734.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 99 2 10 61 3 24 63 4 29 94 5 25 127 6 27 77 7 20 71 8 16 90 9 20 90 10 31 104 11 18 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 116 87 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 110 116 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 111 58 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 102 108 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 116 30 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 104 105 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 111 131 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 105 39 plFiberPlate : 77 possible sky positions to use as objects from a possible 491. plFiberPlate : 40 possible sky positions to use as objects from a possible 490. plFiberPlate : 33 possible sky positions to use as objects from a possible 489. plFiberPlate : 15 possible sky positions to use as objects from a possible 488. plFiberPlate : 19 possible sky positions to use as objects from a possible 487. plFiberPlate : 27 possible sky positions to use as objects from a possible 486. plFiberPlate : 34 possible sky positions to use as objects from a possible 485. plFiberPlate : 63 possible sky positions to use as objects from a possible 484. plFiberPlate : 28 possible sky positions to use as objects from a possible 483. plFiberPlate : 20 possible sky positions to use as objects from a possible 482. plFiberPlate : 14 possible sky positions to use as objects from a possible 481. plFiberPlate : 13 possible sky positions to use as objects from a possible 480. plFiberPlate : 9 possible sky positions to use as objects from a possible 479. plFiberPlate : 7 possible sky positions to use as objects from a possible 478. plFiberPlate : 20 possible sky positions to use as objects from a possible 477. plFiberPlate : 20 possible sky positions to use as objects from a possible 476. plFiberPlate : 74 possible sky positions to use as objects from a possible 475. plFiberPlate : 47 possible sky positions to use as objects from a possible 474. plFiberPlate : 32 possible sky positions to use as objects from a possible 473. plFiberPlate : 13 possible sky positions to use as objects from a possible 472. plFiberPlate : 10 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 5 possible sky positions to use as objects from a possible 469. plFiberPlate : 13 possible sky positions to use as objects from a possible 468. plFiberPlate : 22 possible sky positions to use as objects from a possible 467. plFiberPlate : 59 possible sky positions to use as objects from a possible 466. plFiberPlate : 40 possible sky positions to use as objects from a possible 465. plFiberPlate : 32 possible sky positions to use as objects from a possible 464. plFiberPlate : 22 possible sky positions to use as objects from a possible 463. plFiberPlate : 8 possible sky positions to use as objects from a possible 462. plFiberPlate : 22 possible sky positions to use as objects from a possible 461. plFiberPlate : 15 possible sky positions to use as objects from a possible 460. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0733.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0734.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0734.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0735.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 94 2 18 61 3 18 74 4 23 98 5 22 107 6 17 74 7 18 76 8 16 107 9 21 98 10 33 134 11 36 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 121 60 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 118 48 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 111 58 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 112 38 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 129 146 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 118 62 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 121 92 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 123 77 plFiberPlate : 126 possible sky positions to use as objects from a possible 513. plFiberPlate : 78 possible sky positions to use as objects from a possible 512. plFiberPlate : 48 possible sky positions to use as objects from a possible 511. plFiberPlate : 24 possible sky positions to use as objects from a possible 510. plFiberPlate : 33 possible sky positions to use as objects from a possible 509. plFiberPlate : 18 possible sky positions to use as objects from a possible 508. plFiberPlate : 38 possible sky positions to use as objects from a possible 507. plFiberPlate : 71 possible sky positions to use as objects from a possible 506. plFiberPlate : 59 possible sky positions to use as objects from a possible 505. plFiberPlate : 24 possible sky positions to use as objects from a possible 504. plFiberPlate : 16 possible sky positions to use as objects from a possible 503. plFiberPlate : 10 possible sky positions to use as objects from a possible 502. plFiberPlate : 11 possible sky positions to use as objects from a possible 501. plFiberPlate : 10 possible sky positions to use as objects from a possible 500. plFiberPlate : 5 possible sky positions to use as objects from a possible 499. plFiberPlate : 14 possible sky positions to use as objects from a possible 498. plFiberPlate : 56 possible sky positions to use as objects from a possible 497. plFiberPlate : 42 possible sky positions to use as objects from a possible 496. plFiberPlate : 14 possible sky positions to use as objects from a possible 495. plFiberPlate : 5 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 6 possible sky positions to use as objects from a possible 492. plFiberPlate : 30 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 39 possible sky positions to use as objects from a possible 488. plFiberPlate : 28 possible sky positions to use as objects from a possible 487. plFiberPlate : 20 possible sky positions to use as objects from a possible 486. plFiberPlate : 16 possible sky positions to use as objects from a possible 485. plFiberPlate : 25 possible sky positions to use as objects from a possible 484. plFiberPlate : 21 possible sky positions to use as objects from a possible 483. plFiberPlate : 5 possible sky positions to use as objects from a possible 482. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0734.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0735.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0735.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0736.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 109 2 23 77 3 25 85 4 29 121 5 19 127 6 12 66 7 7 77 8 15 104 9 8 99 10 34 153 11 22 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 138 74 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 148 124 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 138 61 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 137 96 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 146 29 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 139 67 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 136 142 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 135 68 plFiberPlate : 129 possible sky positions to use as objects from a possible 563. plFiberPlate : 42 possible sky positions to use as objects from a possible 562. plFiberPlate : 31 possible sky positions to use as objects from a possible 561. plFiberPlate : 21 possible sky positions to use as objects from a possible 560. plFiberPlate : 18 possible sky positions to use as objects from a possible 559. plFiberPlate : 23 possible sky positions to use as objects from a possible 558. plFiberPlate : 34 possible sky positions to use as objects from a possible 557. plFiberPlate : 92 possible sky positions to use as objects from a possible 556. plFiberPlate : 31 possible sky positions to use as objects from a possible 555. plFiberPlate : 8 possible sky positions to use as objects from a possible 554. plFiberPlate : 8 possible sky positions to use as objects from a possible 553. plFiberPlate : 13 possible sky positions to use as objects from a possible 552. plFiberPlate : 6 possible sky positions to use as objects from a possible 551. plFiberPlate : 2 possible sky positions to use as objects from a possible 550. plFiberPlate : 15 possible sky positions to use as objects from a possible 549. plFiberPlate : 30 possible sky positions to use as objects from a possible 548. plFiberPlate : 59 possible sky positions to use as objects from a possible 547. plFiberPlate : 26 possible sky positions to use as objects from a possible 546. plFiberPlate : 16 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 17 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 21 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 15 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 2 possible sky positions to use as objects from a possible 533. plFiberPlate : 11 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0735.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0736.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0736.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0737.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 108 2 17 71 3 15 67 4 26 97 5 16 122 6 13 77 7 11 76 8 14 109 9 17 107 10 31 137 11 26 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 148 111 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 146 29 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 147 12 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 153 92 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 143 47 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 156 94 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 148 35 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 148 17 plFiberPlate : 123 possible sky positions to use as objects from a possible 543. plFiberPlate : 74 possible sky positions to use as objects from a possible 542. plFiberPlate : 51 possible sky positions to use as objects from a possible 541. plFiberPlate : 30 possible sky positions to use as objects from a possible 540. plFiberPlate : 20 possible sky positions to use as objects from a possible 539. plFiberPlate : 35 possible sky positions to use as objects from a possible 538. plFiberPlate : 50 possible sky positions to use as objects from a possible 537. plFiberPlate : 84 possible sky positions to use as objects from a possible 536. plFiberPlate : 69 possible sky positions to use as objects from a possible 535. plFiberPlate : 38 possible sky positions to use as objects from a possible 534. plFiberPlate : 26 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 9 possible sky positions to use as objects from a possible 531. plFiberPlate : 9 possible sky positions to use as objects from a possible 530. plFiberPlate : 30 possible sky positions to use as objects from a possible 529. plFiberPlate : 20 possible sky positions to use as objects from a possible 528. plFiberPlate : 58 possible sky positions to use as objects from a possible 527. plFiberPlate : 35 possible sky positions to use as objects from a possible 526. plFiberPlate : 33 possible sky positions to use as objects from a possible 525. plFiberPlate : 23 possible sky positions to use as objects from a possible 524. plFiberPlate : 18 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 16 possible sky positions to use as objects from a possible 521. plFiberPlate : 22 possible sky positions to use as objects from a possible 520. plFiberPlate : 19 possible sky positions to use as objects from a possible 519. plFiberPlate : 32 possible sky positions to use as objects from a possible 518. plFiberPlate : 19 possible sky positions to use as objects from a possible 517. plFiberPlate : 18 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 19 possible sky positions to use as objects from a possible 514. plFiberPlate : 10 possible sky positions to use as objects from a possible 513. plFiberPlate : 15 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0736.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0737.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0737.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0738.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 114 2 15 68 3 13 81 4 21 111 5 12 121 6 11 64 7 12 67 8 15 106 9 10 92 10 25 149 11 21 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 169 67 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 162 81 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 154 49 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 158 57 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 156 94 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 158 91 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 165 85 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 174 45 plFiberPlate : 126 possible sky positions to use as objects from a possible 546. plFiberPlate : 61 possible sky positions to use as objects from a possible 545. plFiberPlate : 23 possible sky positions to use as objects from a possible 544. plFiberPlate : 20 possible sky positions to use as objects from a possible 543. plFiberPlate : 27 possible sky positions to use as objects from a possible 542. plFiberPlate : 15 possible sky positions to use as objects from a possible 541. plFiberPlate : 44 possible sky positions to use as objects from a possible 540. plFiberPlate : 92 possible sky positions to use as objects from a possible 539. plFiberPlate : 64 possible sky positions to use as objects from a possible 538. plFiberPlate : 23 possible sky positions to use as objects from a possible 537. plFiberPlate : 18 possible sky positions to use as objects from a possible 536. plFiberPlate : 3 possible sky positions to use as objects from a possible 535. plFiberPlate : 19 possible sky positions to use as objects from a possible 534. plFiberPlate : 14 possible sky positions to use as objects from a possible 533. plFiberPlate : 13 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : 74 possible sky positions to use as objects from a possible 530. plFiberPlate : 49 possible sky positions to use as objects from a possible 529. plFiberPlate : 33 possible sky positions to use as objects from a possible 528. plFiberPlate : 19 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 29 possible sky positions to use as objects from a possible 523. plFiberPlate : 19 possible sky positions to use as objects from a possible 522. plFiberPlate : 17 possible sky positions to use as objects from a possible 521. plFiberPlate : 24 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 5 possible sky positions to use as objects from a possible 516. plFiberPlate : 19 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0737.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0738.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0738.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0739.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 107 2 19 71 3 21 75 4 24 103 5 9 111 6 14 43 7 19 61 8 15 110 9 12 71 10 38 142 11 29 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 181 53 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 167 133 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 177 99 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 175 83 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 184 30 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 181 20 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 174 45 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 178 97 plFiberPlate : 107 possible sky positions to use as objects from a possible 513. plFiberPlate : 58 possible sky positions to use as objects from a possible 512. plFiberPlate : 34 possible sky positions to use as objects from a possible 511. plFiberPlate : 27 possible sky positions to use as objects from a possible 510. plFiberPlate : 9 possible sky positions to use as objects from a possible 509. plFiberPlate : 34 possible sky positions to use as objects from a possible 508. plFiberPlate : 39 possible sky positions to use as objects from a possible 507. plFiberPlate : 77 possible sky positions to use as objects from a possible 506. plFiberPlate : 57 possible sky positions to use as objects from a possible 505. plFiberPlate : 50 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 21 possible sky positions to use as objects from a possible 502. plFiberPlate : 18 possible sky positions to use as objects from a possible 501. plFiberPlate : 13 possible sky positions to use as objects from a possible 500. plFiberPlate : 34 possible sky positions to use as objects from a possible 499. plFiberPlate : 24 possible sky positions to use as objects from a possible 498. plFiberPlate : 85 possible sky positions to use as objects from a possible 497. plFiberPlate : 75 possible sky positions to use as objects from a possible 496. plFiberPlate : 34 possible sky positions to use as objects from a possible 495. plFiberPlate : 24 possible sky positions to use as objects from a possible 494. plFiberPlate : 12 possible sky positions to use as objects from a possible 493. plFiberPlate : 12 possible sky positions to use as objects from a possible 492. plFiberPlate : 20 possible sky positions to use as objects from a possible 491. plFiberPlate : 25 possible sky positions to use as objects from a possible 490. plFiberPlate : 32 possible sky positions to use as objects from a possible 489. plFiberPlate : 32 possible sky positions to use as objects from a possible 488. plFiberPlate : 21 possible sky positions to use as objects from a possible 487. plFiberPlate : 17 possible sky positions to use as objects from a possible 486. plFiberPlate : 10 possible sky positions to use as objects from a possible 485. plFiberPlate : 3 possible sky positions to use as objects from a possible 484. plFiberPlate : 6 possible sky positions to use as objects from a possible 483. plFiberPlate : 29 possible sky positions to use as objects from a possible 482. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0738.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0739.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0739.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0740.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 102 2 26 65 3 23 85 4 24 113 5 12 118 6 11 71 7 9 71 8 9 99 9 10 103 10 31 147 11 21 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 193 45 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 178 40 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 187 32 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 199 49 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 193 94 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 195 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 198 47 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 182 91 plFiberPlate : 141 possible sky positions to use as objects from a possible 534. plFiberPlate : 64 possible sky positions to use as objects from a possible 533. plFiberPlate : 42 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 16 possible sky positions to use as objects from a possible 530. plFiberPlate : 31 possible sky positions to use as objects from a possible 529. plFiberPlate : 27 possible sky positions to use as objects from a possible 528. plFiberPlate : 80 possible sky positions to use as objects from a possible 527. plFiberPlate : 65 possible sky positions to use as objects from a possible 526. plFiberPlate : 33 possible sky positions to use as objects from a possible 525. plFiberPlate : 7 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 19 possible sky positions to use as objects from a possible 520. plFiberPlate : 13 possible sky positions to use as objects from a possible 519. plFiberPlate : 63 possible sky positions to use as objects from a possible 518. plFiberPlate : 41 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 5 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 6 possible sky positions to use as objects from a possible 513. plFiberPlate : 14 possible sky positions to use as objects from a possible 512. plFiberPlate : 17 possible sky positions to use as objects from a possible 511. plFiberPlate : 12 possible sky positions to use as objects from a possible 510. plFiberPlate : 33 possible sky positions to use as objects from a possible 509. plFiberPlate : 14 possible sky positions to use as objects from a possible 508. plFiberPlate : 8 possible sky positions to use as objects from a possible 507. plFiberPlate : 13 possible sky positions to use as objects from a possible 506. plFiberPlate : 7 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 9 possible sky positions to use as objects from a possible 503. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0739.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0740.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0740.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0741.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 91 2 11 63 3 23 76 4 21 117 5 12 128 6 11 69 7 13 66 8 15 93 9 11 99 10 30 138 11 14 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 199 81 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 199 49 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 200 54 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 204 96 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 195 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 195 55 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 202 99 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 198 47 plFiberPlate : 137 possible sky positions to use as objects from a possible 519. plFiberPlate : 36 possible sky positions to use as objects from a possible 518. plFiberPlate : 17 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 15 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 32 possible sky positions to use as objects from a possible 513. plFiberPlate : 94 possible sky positions to use as objects from a possible 512. plFiberPlate : 36 possible sky positions to use as objects from a possible 511. plFiberPlate : 7 possible sky positions to use as objects from a possible 510. plFiberPlate : 9 possible sky positions to use as objects from a possible 509. plFiberPlate : 10 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 12 possible sky positions to use as objects from a possible 506. plFiberPlate : 7 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 75 possible sky positions to use as objects from a possible 503. plFiberPlate : 35 possible sky positions to use as objects from a possible 502. plFiberPlate : 16 possible sky positions to use as objects from a possible 501. plFiberPlate : 5 possible sky positions to use as objects from a possible 500. plFiberPlate : 11 possible sky positions to use as objects from a possible 499. plFiberPlate : 9 possible sky positions to use as objects from a possible 498. plFiberPlate : 4 possible sky positions to use as objects from a possible 497. plFiberPlate : 7 possible sky positions to use as objects from a possible 496. plFiberPlate : 15 possible sky positions to use as objects from a possible 495. plFiberPlate : 37 possible sky positions to use as objects from a possible 494. plFiberPlate : 16 possible sky positions to use as objects from a possible 493. plFiberPlate : 9 possible sky positions to use as objects from a possible 492. plFiberPlate : 13 possible sky positions to use as objects from a possible 491. plFiberPlate : 4 possible sky positions to use as objects from a possible 490. plFiberPlate : 6 possible sky positions to use as objects from a possible 489. plFiberPlate : 21 possible sky positions to use as objects from a possible 488. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0740.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0741.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0741.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0742.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 113 2 10 62 3 17 68 4 23 106 5 18 121 6 15 71 7 4 67 8 4 104 9 7 102 10 23 132 11 15 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 209 45 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 215 2 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 213 140 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 212 41 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 214 82 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 215 12 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 214 45 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 217 89 plFiberPlate : 111 possible sky positions to use as objects from a possible 537. plFiberPlate : 51 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 21 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 62 possible sky positions to use as objects from a possible 531. plFiberPlate : 87 possible sky positions to use as objects from a possible 530. plFiberPlate : 35 possible sky positions to use as objects from a possible 529. plFiberPlate : 7 possible sky positions to use as objects from a possible 528. plFiberPlate : 4 possible sky positions to use as objects from a possible 527. plFiberPlate : 10 possible sky positions to use as objects from a possible 526. plFiberPlate : 11 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 36 possible sky positions to use as objects from a possible 522. plFiberPlate : 73 possible sky positions to use as objects from a possible 521. plFiberPlate : 32 possible sky positions to use as objects from a possible 520. plFiberPlate : 10 possible sky positions to use as objects from a possible 519. plFiberPlate : 5 possible sky positions to use as objects from a possible 518. plFiberPlate : 13 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 23 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 11 possible sky positions to use as objects from a possible 513. plFiberPlate : 50 possible sky positions to use as objects from a possible 512. plFiberPlate : 18 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : 6 possible sky positions to use as objects from a possible 509. plFiberPlate : 20 possible sky positions to use as objects from a possible 508. plFiberPlate : 12 possible sky positions to use as objects from a possible 507. plFiberPlate : 12 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0741.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0742.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0742.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0743.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 125 2 17 70 3 9 63 4 9 111 5 7 123 6 6 60 7 8 84 8 10 110 9 2 102 10 22 138 11 18 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 224 11 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 214 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 223 59 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 225 72 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 219 10 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 224 71 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 229 15 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 226 82 plFiberPlate : 129 possible sky positions to use as objects from a possible 545. plFiberPlate : 71 possible sky positions to use as objects from a possible 544. plFiberPlate : 29 possible sky positions to use as objects from a possible 543. plFiberPlate : 28 possible sky positions to use as objects from a possible 542. plFiberPlate : 17 possible sky positions to use as objects from a possible 541. plFiberPlate : 46 possible sky positions to use as objects from a possible 540. plFiberPlate : 41 possible sky positions to use as objects from a possible 539. plFiberPlate : 90 possible sky positions to use as objects from a possible 538. plFiberPlate : 60 possible sky positions to use as objects from a possible 537. plFiberPlate : 37 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 8 possible sky positions to use as objects from a possible 534. plFiberPlate : 8 possible sky positions to use as objects from a possible 533. plFiberPlate : 36 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : 10 possible sky positions to use as objects from a possible 530. plFiberPlate : 74 possible sky positions to use as objects from a possible 529. plFiberPlate : 48 possible sky positions to use as objects from a possible 528. plFiberPlate : 17 possible sky positions to use as objects from a possible 527. plFiberPlate : 9 possible sky positions to use as objects from a possible 526. plFiberPlate : 9 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 16 possible sky positions to use as objects from a possible 522. plFiberPlate : 11 possible sky positions to use as objects from a possible 521. plFiberPlate : 19 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 7 possible sky positions to use as objects from a possible 518. plFiberPlate : 6 possible sky positions to use as objects from a possible 517. plFiberPlate : 4 possible sky positions to use as objects from a possible 516. plFiberPlate : 1 possible sky positions to use as objects from a possible 515. plFiberPlate : 28 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0742.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0743.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0743.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0744.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 129 2 16 71 3 11 69 4 11 93 5 7 107 6 10 70 7 11 77 8 8 122 9 7 105 10 18 135 11 17 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 226 14 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 238 54 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 224 23 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 229 51 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 229 82 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 222 78 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 229 15 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 226 82 plFiberPlate : 110 possible sky positions to use as objects from a possible 549. plFiberPlate : 45 possible sky positions to use as objects from a possible 548. plFiberPlate : 26 possible sky positions to use as objects from a possible 547. plFiberPlate : 12 possible sky positions to use as objects from a possible 546. plFiberPlate : 17 possible sky positions to use as objects from a possible 545. plFiberPlate : 31 possible sky positions to use as objects from a possible 544. plFiberPlate : 80 possible sky positions to use as objects from a possible 543. plFiberPlate : 66 possible sky positions to use as objects from a possible 542. plFiberPlate : 39 possible sky positions to use as objects from a possible 541. plFiberPlate : 22 possible sky positions to use as objects from a possible 540. plFiberPlate : 10 possible sky positions to use as objects from a possible 539. plFiberPlate : 2 possible sky positions to use as objects from a possible 538. plFiberPlate : 5 possible sky positions to use as objects from a possible 537. plFiberPlate : 17 possible sky positions to use as objects from a possible 536. plFiberPlate : 33 possible sky positions to use as objects from a possible 535. plFiberPlate : 35 possible sky positions to use as objects from a possible 534. plFiberPlate : 75 possible sky positions to use as objects from a possible 533. plFiberPlate : 47 possible sky positions to use as objects from a possible 532. plFiberPlate : 40 possible sky positions to use as objects from a possible 531. plFiberPlate : 31 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 6 possible sky positions to use as objects from a possible 528. plFiberPlate : 32 possible sky positions to use as objects from a possible 527. plFiberPlate : 15 possible sky positions to use as objects from a possible 526. plFiberPlate : 33 possible sky positions to use as objects from a possible 525. plFiberPlate : 39 possible sky positions to use as objects from a possible 524. plFiberPlate : 19 possible sky positions to use as objects from a possible 523. plFiberPlate : 11 possible sky positions to use as objects from a possible 522. plFiberPlate : 8 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 23 possible sky positions to use as objects from a possible 518. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0743.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0744.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0744.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0745.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 106 2 14 69 3 14 81 4 10 124 5 14 131 6 16 77 7 9 68 8 11 99 9 9 94 10 20 152 11 17 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 247 63 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 249 53 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 238 103 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 241 93 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 244 77 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 240 104 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 242 87 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 252 125 plFiberPlate : 141 possible sky positions to use as objects from a possible 559. plFiberPlate : 105 possible sky positions to use as objects from a possible 558. plFiberPlate : 49 possible sky positions to use as objects from a possible 557. plFiberPlate : 30 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 21 possible sky positions to use as objects from a possible 554. plFiberPlate : 42 possible sky positions to use as objects from a possible 553. plFiberPlate : 99 possible sky positions to use as objects from a possible 552. plFiberPlate : 66 possible sky positions to use as objects from a possible 551. plFiberPlate : 23 possible sky positions to use as objects from a possible 550. plFiberPlate : 11 possible sky positions to use as objects from a possible 549. plFiberPlate : 7 possible sky positions to use as objects from a possible 548. plFiberPlate : 7 possible sky positions to use as objects from a possible 547. plFiberPlate : 3 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 17 possible sky positions to use as objects from a possible 544. plFiberPlate : 59 possible sky positions to use as objects from a possible 543. plFiberPlate : 34 possible sky positions to use as objects from a possible 542. plFiberPlate : 7 possible sky positions to use as objects from a possible 541. plFiberPlate : 6 possible sky positions to use as objects from a possible 540. plFiberPlate : 1 possible sky positions to use as objects from a possible 539. plFiberPlate : 3 possible sky positions to use as objects from a possible 538. plFiberPlate : 3 possible sky positions to use as objects from a possible 537. plFiberPlate : 5 possible sky positions to use as objects from a possible 536. plFiberPlate : 18 possible sky positions to use as objects from a possible 535. plFiberPlate : 47 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 9 possible sky positions to use as objects from a possible 532. plFiberPlate : 7 possible sky positions to use as objects from a possible 531. plFiberPlate : 18 possible sky positions to use as objects from a possible 530. plFiberPlate : 7 possible sky positions to use as objects from a possible 529. plFiberPlate : 13 possible sky positions to use as objects from a possible 528. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0744.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0745.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0745.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0746.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 104 2 7 64 3 13 74 4 17 110 5 11 121 6 5 76 7 7 85 8 8 117 9 8 112 10 18 136 11 12 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 252 76 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 263 30 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 258 46 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 259 86 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 252 35 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 249 20 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 251 31 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 252 125 plFiberPlate : 121 possible sky positions to use as objects from a possible 551. plFiberPlate : 45 possible sky positions to use as objects from a possible 550. plFiberPlate : 31 possible sky positions to use as objects from a possible 549. plFiberPlate : 12 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 19 possible sky positions to use as objects from a possible 546. plFiberPlate : 47 possible sky positions to use as objects from a possible 545. plFiberPlate : 99 possible sky positions to use as objects from a possible 544. plFiberPlate : 66 possible sky positions to use as objects from a possible 543. plFiberPlate : 68 possible sky positions to use as objects from a possible 542. plFiberPlate : 26 possible sky positions to use as objects from a possible 541. plFiberPlate : 10 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 11 possible sky positions to use as objects from a possible 538. plFiberPlate : 22 possible sky positions to use as objects from a possible 537. plFiberPlate : 25 possible sky positions to use as objects from a possible 536. plFiberPlate : 70 possible sky positions to use as objects from a possible 535. plFiberPlate : 56 possible sky positions to use as objects from a possible 534. plFiberPlate : 40 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 18 possible sky positions to use as objects from a possible 531. plFiberPlate : 14 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 19 possible sky positions to use as objects from a possible 528. plFiberPlate : 19 possible sky positions to use as objects from a possible 527. plFiberPlate : 51 possible sky positions to use as objects from a possible 526. plFiberPlate : 29 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 21 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0745.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0746.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0746.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0747.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 117 2 18 87 3 21 84 4 25 108 5 8 121 6 9 66 7 7 61 8 9 109 9 5 109 10 34 147 11 26 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 275 70 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 268 8 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 277 18 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 273 44 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 274 2 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 267 14 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 266 63 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 273 4 plFiberPlate : 139 possible sky positions to use as objects from a possible 565. plFiberPlate : 69 possible sky positions to use as objects from a possible 564. plFiberPlate : 53 possible sky positions to use as objects from a possible 563. plFiberPlate : 35 possible sky positions to use as objects from a possible 562. plFiberPlate : 42 possible sky positions to use as objects from a possible 561. plFiberPlate : 41 possible sky positions to use as objects from a possible 560. plFiberPlate : 34 possible sky positions to use as objects from a possible 559. plFiberPlate : 66 possible sky positions to use as objects from a possible 558. plFiberPlate : 40 possible sky positions to use as objects from a possible 557. plFiberPlate : 28 possible sky positions to use as objects from a possible 556. plFiberPlate : 23 possible sky positions to use as objects from a possible 555. plFiberPlate : 7 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 11 possible sky positions to use as objects from a possible 552. plFiberPlate : 9 possible sky positions to use as objects from a possible 551. plFiberPlate : 17 possible sky positions to use as objects from a possible 550. plFiberPlate : 85 possible sky positions to use as objects from a possible 549. plFiberPlate : 35 possible sky positions to use as objects from a possible 548. plFiberPlate : 20 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 32 possible sky positions to use as objects from a possible 544. plFiberPlate : 20 possible sky positions to use as objects from a possible 543. plFiberPlate : 3 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 29 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 4 possible sky positions to use as objects from a possible 538. plFiberPlate : 0 possible sky positions to use as objects from a possible 537. plFiberPlate: No sky found for bundle at 13.226 239.325, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 537. plFiberPlate: No sky found for bundle at 13.226 239.325, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 537. plFiberPlate: No sky found for bundle at 13.226 239.325, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 537. plFiberPlate: No sky found for bundle at 13.226 239.325, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 537. plFiberPlate: No sky found for bundle at 13.226 239.325, increase box by 50 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 537. plFiberPlate : 2 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 16 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0746.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0747.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0747.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0748.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 116 2 9 60 3 10 60 4 23 110 5 18 118 6 19 71 7 17 85 8 10 111 9 14 97 10 20 127 11 13 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 284 29 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 281 42 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 286 35 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 277 18 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 286 12 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 293 52 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 291 55 plFiberPlate : adding spectro-photo std with objId = 1739 0 6 281 57 plFiberPlate : 123 possible sky positions to use as objects from a possible 544. plFiberPlate : 54 possible sky positions to use as objects from a possible 543. plFiberPlate : 24 possible sky positions to use as objects from a possible 542. plFiberPlate : 13 possible sky positions to use as objects from a possible 541. plFiberPlate : 33 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 43 possible sky positions to use as objects from a possible 538. plFiberPlate : 84 possible sky positions to use as objects from a possible 537. plFiberPlate : 64 possible sky positions to use as objects from a possible 536. plFiberPlate : 35 possible sky positions to use as objects from a possible 535. plFiberPlate : 15 possible sky positions to use as objects from a possible 534. plFiberPlate : 12 possible sky positions to use as objects from a possible 533. plFiberPlate : 9 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 17 possible sky positions to use as objects from a possible 530. plFiberPlate : 18 possible sky positions to use as objects from a possible 529. plFiberPlate : 100 possible sky positions to use as objects from a possible 528. plFiberPlate : 45 possible sky positions to use as objects from a possible 527. plFiberPlate : 26 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 10 possible sky positions to use as objects from a possible 522. plFiberPlate : 9 possible sky positions to use as objects from a possible 521. plFiberPlate : 18 possible sky positions to use as objects from a possible 520. plFiberPlate : 48 possible sky positions to use as objects from a possible 519. plFiberPlate : 27 possible sky positions to use as objects from a possible 518. plFiberPlate : 20 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 5 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 31 possible sky positions to use as objects from a possible 513. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0747.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0748.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0748.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0749.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 120 2 17 70 3 24 80 4 26 123 5 12 128 6 12 78 7 9 69 8 11 106 9 9 117 10 39 137 11 28 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 290 43 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 293 52 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 291 55 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 299 84 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 297 13 plFiberPlate : adding spectro-photo std with objId = 2566 0 2 295 77 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 299 9 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 302 43 plFiberPlate : 121 possible sky positions to use as objects from a possible 566. plFiberPlate : 38 possible sky positions to use as objects from a possible 565. plFiberPlate : 18 possible sky positions to use as objects from a possible 564. plFiberPlate : 23 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : 68 possible sky positions to use as objects from a possible 560. plFiberPlate : 92 possible sky positions to use as objects from a possible 559. plFiberPlate : 28 possible sky positions to use as objects from a possible 558. plFiberPlate : 11 possible sky positions to use as objects from a possible 557. plFiberPlate : 8 possible sky positions to use as objects from a possible 556. plFiberPlate : 12 possible sky positions to use as objects from a possible 555. plFiberPlate : 15 possible sky positions to use as objects from a possible 554. plFiberPlate : 18 possible sky positions to use as objects from a possible 553. plFiberPlate : 16 possible sky positions to use as objects from a possible 552. plFiberPlate : 22 possible sky positions to use as objects from a possible 551. plFiberPlate : 88 possible sky positions to use as objects from a possible 550. plFiberPlate : 57 possible sky positions to use as objects from a possible 549. plFiberPlate : 30 possible sky positions to use as objects from a possible 548. plFiberPlate : 27 possible sky positions to use as objects from a possible 547. plFiberPlate : 16 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 7 possible sky positions to use as objects from a possible 544. plFiberPlate : 7 possible sky positions to use as objects from a possible 543. plFiberPlate : 6 possible sky positions to use as objects from a possible 542. plFiberPlate : 27 possible sky positions to use as objects from a possible 541. plFiberPlate : 30 possible sky positions to use as objects from a possible 540. plFiberPlate : 14 possible sky positions to use as objects from a possible 539. plFiberPlate : 3 possible sky positions to use as objects from a possible 538. plFiberPlate : 3 possible sky positions to use as objects from a possible 537. plFiberPlate : 14 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0748.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0749.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0749.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0750.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 116 2 7 74 3 12 90 4 25 122 5 9 144 6 7 93 7 5 82 8 7 116 9 4 116 10 20 155 11 11 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 304 28 plFiberPlate : adding spectro-photo std with objId = 1739 0 3 292 41 plFiberPlate : adding spectro-photo std with objId = 2566 0 3 299 84 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 305 29 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 311 26 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 297 13 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 308 30 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 304 14 plFiberPlate : 125 possible sky positions to use as objects from a possible 601. plFiberPlate : 49 possible sky positions to use as objects from a possible 600. plFiberPlate : 20 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 16 possible sky positions to use as objects from a possible 597. plFiberPlate : 27 possible sky positions to use as objects from a possible 596. plFiberPlate : 40 possible sky positions to use as objects from a possible 595. plFiberPlate : 94 possible sky positions to use as objects from a possible 594. plFiberPlate : 43 possible sky positions to use as objects from a possible 593. plFiberPlate : 8 possible sky positions to use as objects from a possible 592. plFiberPlate : 6 possible sky positions to use as objects from a possible 591. plFiberPlate : 11 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : 11 possible sky positions to use as objects from a possible 588. plFiberPlate : 16 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 76 possible sky positions to use as objects from a possible 585. plFiberPlate : 45 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 14 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 65 possible sky positions to use as objects from a possible 576. plFiberPlate : 28 possible sky positions to use as objects from a possible 575. plFiberPlate : 5 possible sky positions to use as objects from a possible 574. plFiberPlate : 8 possible sky positions to use as objects from a possible 573. plFiberPlate : 4 possible sky positions to use as objects from a possible 572. plFiberPlate : 24 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0749.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0750.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0750.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0751.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 97 2 10 62 3 11 89 4 14 127 5 8 134 6 8 65 7 2 65 8 2 106 9 3 105 10 16 149 11 15 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1739 0 1 309 23 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 316 19 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 311 26 plFiberPlate : adding spectro-photo std with objId = 1739 0 4 305 29 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 322 19 plFiberPlate : adding spectro-photo std with objId = 1739 0 5 309 42 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 315 75 plFiberPlate : adding spectro-photo std with objId = 1739 0 2 315 51 plFiberPlate : 148 possible sky positions to use as objects from a possible 560. plFiberPlate : 64 possible sky positions to use as objects from a possible 559. plFiberPlate : 27 possible sky positions to use as objects from a possible 558. plFiberPlate : 16 possible sky positions to use as objects from a possible 557. plFiberPlate : 7 possible sky positions to use as objects from a possible 556. plFiberPlate : 19 possible sky positions to use as objects from a possible 555. plFiberPlate : 44 possible sky positions to use as objects from a possible 554. plFiberPlate : 111 possible sky positions to use as objects from a possible 553. plFiberPlate : 74 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 15 possible sky positions to use as objects from a possible 550. plFiberPlate : 2 possible sky positions to use as objects from a possible 549. plFiberPlate : 11 possible sky positions to use as objects from a possible 548. plFiberPlate : 16 possible sky positions to use as objects from a possible 547. plFiberPlate : 12 possible sky positions to use as objects from a possible 546. plFiberPlate : 12 possible sky positions to use as objects from a possible 545. plFiberPlate : 90 possible sky positions to use as objects from a possible 544. plFiberPlate : 51 possible sky positions to use as objects from a possible 543. plFiberPlate : 12 possible sky positions to use as objects from a possible 542. plFiberPlate : 1 possible sky positions to use as objects from a possible 541. plFiberPlate : 11 possible sky positions to use as objects from a possible 540. plFiberPlate : 7 possible sky positions to use as objects from a possible 539. plFiberPlate : 8 possible sky positions to use as objects from a possible 538. plFiberPlate : 18 possible sky positions to use as objects from a possible 537. plFiberPlate : 31 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 6 possible sky positions to use as objects from a possible 534. plFiberPlate : 4 possible sky positions to use as objects from a possible 533. plFiberPlate : 2 possible sky positions to use as objects from a possible 532. plFiberPlate : 4 possible sky positions to use as objects from a possible 531. plFiberPlate : 2 possible sky positions to use as objects from a possible 530. plFiberPlate : 14 possible sky positions to use as objects from a possible 529. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0750.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0751.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0751.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0752.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 112 2 11 68 3 11 76 4 16 108 5 4 128 6 6 78 7 13 69 8 14 104 9 11 101 10 24 140 11 15 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 329 4 plFiberPlate : adding spectro-photo std with objId = 1904 0 1 174 38 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 341 44 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 336 8 plFiberPlate : adding spectro-photo std with objId = 1904 0 3 178 98 plFiberPlate : adding spectro-photo std with objId = 1904 0 5 173 10 plFiberPlate : adding spectro-photo std with objId = 2566 0 6 333 50 plFiberPlate : adding spectro-photo std with objId = 1904 0 2 173 15 plFiberPlate : 125 possible sky positions to use as objects from a possible 554. plFiberPlate : 78 possible sky positions to use as objects from a possible 553. plFiberPlate : 39 possible sky positions to use as objects from a possible 552. plFiberPlate : 29 possible sky positions to use as objects from a possible 551. plFiberPlate : 23 possible sky positions to use as objects from a possible 550. plFiberPlate : 35 possible sky positions to use as objects from a possible 549. plFiberPlate : 47 possible sky positions to use as objects from a possible 548. plFiberPlate : 75 possible sky positions to use as objects from a possible 547. plFiberPlate : 56 possible sky positions to use as objects from a possible 546. plFiberPlate : 32 possible sky positions to use as objects from a possible 545. plFiberPlate : 13 possible sky positions to use as objects from a possible 544. plFiberPlate : 14 possible sky positions to use as objects from a possible 543. plFiberPlate : 6 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 38 possible sky positions to use as objects from a possible 540. plFiberPlate : 19 possible sky positions to use as objects from a possible 539. plFiberPlate : 64 possible sky positions to use as objects from a possible 538. plFiberPlate : 68 possible sky positions to use as objects from a possible 537. plFiberPlate : 35 possible sky positions to use as objects from a possible 536. plFiberPlate : 13 possible sky positions to use as objects from a possible 535. plFiberPlate : 9 possible sky positions to use as objects from a possible 534. plFiberPlate : 16 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : 7 possible sky positions to use as objects from a possible 531. plFiberPlate : 38 possible sky positions to use as objects from a possible 530. plFiberPlate : 45 possible sky positions to use as objects from a possible 529. plFiberPlate : 43 possible sky positions to use as objects from a possible 528. plFiberPlate : 17 possible sky positions to use as objects from a possible 527. plFiberPlate : 8 possible sky positions to use as objects from a possible 526. plFiberPlate : 11 possible sky positions to use as objects from a possible 525. plFiberPlate : 7 possible sky positions to use as objects from a possible 524. plFiberPlate : 24 possible sky positions to use as objects from a possible 523. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0751.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0752.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0752.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2001.10.1/plPlugMapP-0753.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 133 2 16 81 3 15 81 4 12 114 5 10 113 6 7 63 7 4 68 8 15 117 9 4 109 10 28 146 11 19 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2566 0 1 348 49 plFiberPlate : adding spectro-photo std with objId = 1904 0 1 195 58 plFiberPlate : adding spectro-photo std with objId = 1904 0 6 190 4 plFiberPlate : adding spectro-photo std with objId = 1904 0 3 184 15 plFiberPlate : adding spectro-photo std with objId = 1904 0 6 183 41 plFiberPlate : adding spectro-photo std with objId = 2566 0 4 341 44 plFiberPlate : adding spectro-photo std with objId = 1904 0 3 178 98 plFiberPlate : adding spectro-photo std with objId = 2566 0 5 353 48 plFiberPlate : 124 possible sky positions to use as objects from a possible 568. plFiberPlate : 62 possible sky positions to use as objects from a possible 567. plFiberPlate : 36 possible sky positions to use as objects from a possible 566. plFiberPlate : 13 possible sky positions to use as objects from a possible 565. plFiberPlate : 28 possible sky positions to use as objects from a possible 564. plFiberPlate : 28 possible sky positions to use as objects from a possible 563. plFiberPlate : 41 possible sky positions to use as objects from a possible 562. plFiberPlate : 88 possible sky positions to use as objects from a possible 561. plFiberPlate : 46 possible sky positions to use as objects from a possible 560. plFiberPlate : 39 possible sky positions to use as objects from a possible 559. plFiberPlate : 19 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 12 possible sky positions to use as objects from a possible 555. plFiberPlate : 18 possible sky positions to use as objects from a possible 554. plFiberPlate : 34 possible sky positions to use as objects from a possible 553. plFiberPlate : 70 possible sky positions to use as objects from a possible 552. plFiberPlate : 51 possible sky positions to use as objects from a possible 551. plFiberPlate : 32 possible sky positions to use as objects from a possible 550. plFiberPlate : 19 possible sky positions to use as objects from a possible 549. plFiberPlate : 10 possible sky positions to use as objects from a possible 548. plFiberPlate : 20 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 13 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 39 possible sky positions to use as objects from a possible 543. plFiberPlate : 34 possible sky positions to use as objects from a possible 542. plFiberPlate : 15 possible sky positions to use as objects from a possible 541. plFiberPlate : 8 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 11 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0752.ps/CPS Open /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0753.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2001.10.1/plOverlay-0753.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Oct 4 13:29:14 CDT 2001 Begin running makeFanuc -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 27 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0727.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0727.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0727.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0728.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5345,7.0233) and (-11.67,5.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0728.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.3181,9.6769) and (0.61,12.26) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0728.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 20 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0729.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0729.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0729.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0730.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0730.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.3917,-7.2212) and (-1.09,-11.76) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0730.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 21 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0731.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.1486,8.8653) and (-10.49,6.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0731.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0731.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0732.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.1098,10.6192) and (6.40,10.97) plMakeFanucCodes : fixed path between (6.4036,10.9728) and (5.65,11.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0732.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0732.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0733.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0733.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.6549,-7.3304) and (12.77,0.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0733.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0734.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0734.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0734.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0735.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0735.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0735.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0736.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0736.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0736.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0737.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0737.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0737.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0738.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.6149,-4.9846) and (-12.06,-4.12) plMakeFanucCodes : fixed path between (-12.5295,-2.5751) and (-12.70,-0.89) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0738.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.8997,-7.6388) and (12.47,-2.73) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0738.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0739.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0739.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0739.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0740.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2586,6.0769) and (11.44,5.29) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0740.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0740.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0741.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0741.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0741.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0742.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0742.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0742.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0743.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0743.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0743.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.4324,-6.2876) and (12.74,1.18) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0744.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0744.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0744.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0745.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0745.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0745.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0746.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0746.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0746.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0747.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0747.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0747.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0748.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0748.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0748.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0749.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2659,5.9584) and (-11.70,5.18) plMakeFanucCodes : fixed path between (-11.6986,5.1762) and (-12.10,4.08) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0749.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0749.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0750.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0750.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0750.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0751.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.0100,-7.7989) and (10.83,-6.26) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0751.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0751.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0752.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0752.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0752.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0753.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.0834,-9.8794) and (-6.67,-10.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0753.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6481,10.5880) and (3.04,11.92) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2001.10.1/plFanuc-0753.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Oct 4 13:30:32 CDT 2001 Begin running makeDrillPos -verbose=2 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e04168 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 27 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 727 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 728 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 729 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 682 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 730 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 731 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 683 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 732 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 733 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 734 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 735 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 736 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 737 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 738 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 739 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 740 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 741 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 742 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 743 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 744 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 745 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 746 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 747 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 748 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 749 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 750 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 751 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 752 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 753 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 13 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Oct 4 13:31:10 CDT 2001 Begin running plateEnder dr2001.10.1 -morePipes 1 Executing commands in /p/OSF1/dervish/v8_1/etc/dervishStartup.tcl: Executing commands in /p/OSF1/dp/v11_7/etc/dpStartup.tcl: loading DP scripts from /p/OSF1/dp/v11_7 Executing commands in /p/GENERIC_UNIX/nfcalib/v1_8_2/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /p/OSF1/astrotools/v5_4/etc/astrotoolsStartup.tcl Executing commands in /p/OSF1/plate/v3_5/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2001.10.1 -morePipes 1 failed. PS: Read file for stderr output of this job.