Sender: LSF System Subject: Job 2533: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu May 27 19:25:28 2004 Results reported at Thu May 27 19:26:31 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_249 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.06.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 43.00 sec. Max Memory : 10 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu May 27 19:25:32 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu May 27 19:25:39 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/sdsscp/v1_34/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_2/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_249/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Thu May 27 19:25:39 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_249/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_2/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_34/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_JcUHEv --------------------------------------------------------------- --------------------------------------------------------------- Thu May 27 19:25:39 CDT 2004 Begin running plate --------------------------------------------------------------- Thu May 27 19:25:39 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8be4a24 makePlates : beginning loop over plObs chain; makePlates : making 5 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapT-9499.par makePlates : plateInfo struct for plate 1859 : (h4).mjd 53225 (h4).raCen 313.4135 (h4).decCen 0.03045941 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 313.413 0.030 313.413 1.530 plMakePlateFromTile : mjd of obs : 53225.658782 Observed HA/dec of plate center, fiducial point (deg) : -13.002 0.058 -13.002 1.558 The rotation angle of the fid. point is 19.269414 plMakePlateFromTile : beginning loop over 1106 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapT-9500.par makePlates : plateInfo struct for plate 1860 : (h4).mjd 53225 (h4).raCen 314.931 (h4).decCen -0.006412425 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 314.931 -0.006 314.931 1.494 plMakePlateFromTile : mjd of obs : 53225.660215 Observed HA/dec of plate center, fiducial point (deg) : -14.002 0.022 -14.002 1.521 The rotation angle of the fid. point is 20.587917 plMakePlateFromTile : beginning loop over 1165 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapT-9501.par makePlates : plateInfo struct for plate 1861 : (h4).mjd 53225 (h4).raCen 316.7707 (h4).decCen -0.07187875 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 316.771 -0.072 316.771 1.428 plMakePlateFromTile : mjd of obs : 53225.659769 Observed HA/dec of plate center, fiducial point (deg) : -16.002 -0.043 -16.002 1.456 The rotation angle of the fid. point is 23.137227 plMakePlateFromTile : beginning loop over 1222 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapT-9502.par makePlates : plateInfo struct for plate 1862 : (h4).mjd 53225 (h4).raCen 318.6458 (h4).decCen 0.008482357 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 318.646 0.008 318.646 1.508 plMakePlateFromTile : mjd of obs : 53225.659422 Observed HA/dec of plate center, fiducial point (deg) : -18.002 0.038 -18.002 1.538 The rotation angle of the fid. point is 25.645510 plMakePlateFromTile : beginning loop over 1244 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapT-9503.par makePlates : plateInfo struct for plate 1863 : (h4).mjd 53225 (h4).raCen 320.5509 (h4).decCen -0.01558691 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 320.551 -0.016 320.551 1.484 plMakePlateFromTile : mjd of obs : 53225.659157 Observed HA/dec of plate center, fiducial point (deg) : -20.002 0.015 -20.002 1.514 The rotation angle of the fid. point is 27.972069 plMakePlateFromTile : beginning loop over 1230 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu May 27 19:25:48 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 5 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapP-1859.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 102 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 205 to list of science objects plFiberPlate : adding sky number 234 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 85 to list of science objects plFiberPlate : adding sky number 195 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 90 to list of science objects plFiberPlate : adding sky number 127 to list of science objects plFiberPlate : adding sky number 235 to list of science objects plFiberPlate : adding sky number 225 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 61 2 20 40 3 11 34 4 14 40 5 5 42 6 7 34 7 4 24 8 1 52 9 4 44 10 16 68 11 18 56 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 6 77 136 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 75 253 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 68 145 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 83 36 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 76 261 plFiberPlate : adding spectro-photo std with objId = 2659 0 2 80 101 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 81 290 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 54 possible sky positions to use as objects from a possible 245. plFiberPlate : 36 possible sky positions to use as objects from a possible 244. plFiberPlate : 31 possible sky positions to use as objects from a possible 243. plFiberPlate : 18 possible sky positions to use as objects from a possible 242. plFiberPlate : 6 possible sky positions to use as objects from a possible 241. plFiberPlate : 23 possible sky positions to use as objects from a possible 240. plFiberPlate : 29 possible sky positions to use as objects from a possible 239. plFiberPlate : 41 possible sky positions to use as objects from a possible 238. plFiberPlate : 30 possible sky positions to use as objects from a possible 237. plFiberPlate : 22 possible sky positions to use as objects from a possible 236. plFiberPlate : 19 possible sky positions to use as objects from a possible 235. plFiberPlate : 11 possible sky positions to use as objects from a possible 234. plFiberPlate : 6 possible sky positions to use as objects from a possible 233. plFiberPlate : 9 possible sky positions to use as objects from a possible 232. plFiberPlate : 14 possible sky positions to use as objects from a possible 231. plFiberPlate : 15 possible sky positions to use as objects from a possible 230. plFiberPlate : 19 possible sky positions to use as objects from a possible 229. plFiberPlate : 14 possible sky positions to use as objects from a possible 228. plFiberPlate : 9 possible sky positions to use as objects from a possible 227. plFiberPlate : 8 possible sky positions to use as objects from a possible 226. plFiberPlate : 6 possible sky positions to use as objects from a possible 225. plFiberPlate : 1 possible sky positions to use as objects from a possible 224. plFiberPlate : 7 possible sky positions to use as objects from a possible 223. plFiberPlate : 16 possible sky positions to use as objects from a possible 222. plFiberPlate : 9 possible sky positions to use as objects from a possible 221. plFiberPlate : 26 possible sky positions to use as objects from a possible 220. plFiberPlate : 14 possible sky positions to use as objects from a possible 219. plFiberPlate : 9 possible sky positions to use as objects from a possible 218. plFiberPlate : 3 possible sky positions to use as objects from a possible 217. plFiberPlate : 3 possible sky positions to use as objects from a possible 216. plFiberPlate : 5 possible sky positions to use as objects from a possible 215. plFiberPlate : 9 possible sky positions to use as objects from a possible 214. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1859.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1859.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapP-1860.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 200 to list of science objects plFiberPlate : adding sky number 225 to list of science objects plFiberPlate : adding sky number 44 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 5 to list of science objects plFiberPlate : adding sky number 75 to list of science objects plFiberPlate : adding sky number 42 to list of science objects plFiberPlate : adding sky number 247 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 122 to list of science objects plFiberPlate : adding sky number 39 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 302 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : adding sky number 251 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 85 2 11 54 3 18 49 4 17 50 5 5 53 6 8 26 7 7 34 8 5 55 9 4 40 10 26 88 11 18 76 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 97 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 82 141 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 97 164 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 100 81 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 74 121 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 101 137 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 83 214 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 88 228 plFiberPlate : 64 possible sky positions to use as objects from a possible 299. plFiberPlate : 47 possible sky positions to use as objects from a possible 298. plFiberPlate : 26 possible sky positions to use as objects from a possible 297. plFiberPlate : 9 possible sky positions to use as objects from a possible 296. plFiberPlate : 10 possible sky positions to use as objects from a possible 295. plFiberPlate : 36 possible sky positions to use as objects from a possible 294. plFiberPlate : 31 possible sky positions to use as objects from a possible 293. plFiberPlate : 29 possible sky positions to use as objects from a possible 292. plFiberPlate : 23 possible sky positions to use as objects from a possible 291. plFiberPlate : 21 possible sky positions to use as objects from a possible 290. plFiberPlate : 12 possible sky positions to use as objects from a possible 289. plFiberPlate : 5 possible sky positions to use as objects from a possible 288. plFiberPlate : 6 possible sky positions to use as objects from a possible 287. plFiberPlate : 12 possible sky positions to use as objects from a possible 286. plFiberPlate : 12 possible sky positions to use as objects from a possible 285. plFiberPlate : 10 possible sky positions to use as objects from a possible 284. plFiberPlate : 33 possible sky positions to use as objects from a possible 283. plFiberPlate : 25 possible sky positions to use as objects from a possible 282. plFiberPlate : 18 possible sky positions to use as objects from a possible 281. plFiberPlate : 12 possible sky positions to use as objects from a possible 280. plFiberPlate : 11 possible sky positions to use as objects from a possible 279. plFiberPlate : 3 possible sky positions to use as objects from a possible 278. plFiberPlate : 7 possible sky positions to use as objects from a possible 277. plFiberPlate : 11 possible sky positions to use as objects from a possible 276. plFiberPlate : 23 possible sky positions to use as objects from a possible 275. plFiberPlate : 13 possible sky positions to use as objects from a possible 274. plFiberPlate : 7 possible sky positions to use as objects from a possible 273. plFiberPlate : 2 possible sky positions to use as objects from a possible 272. plFiberPlate : 1 possible sky positions to use as objects from a possible 271. plFiberPlate : 6 possible sky positions to use as objects from a possible 270. plFiberPlate : 2 possible sky positions to use as objects from a possible 269. plFiberPlate : 3 possible sky positions to use as objects from a possible 268. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1859.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1860.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1860.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapP-1861.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 236 to list of science objects plFiberPlate : adding sky number 113 to list of science objects plFiberPlate : adding sky number 244 to list of science objects plFiberPlate : adding sky number 200 to list of science objects plFiberPlate : adding sky number 188 to list of science objects plFiberPlate : adding sky number 370 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 292 to list of science objects plFiberPlate : adding sky number 199 to list of science objects plFiberPlate : adding sky number 290 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 334 to list of science objects plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 300 to list of science objects plFiberPlate : adding sky number 340 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 82 2 14 52 3 11 49 4 13 78 5 4 74 6 5 53 7 1 52 8 1 71 9 2 79 10 20 92 11 16 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 98 141 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 87 89 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 101 14 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 101 144 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 96 171 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 108 6 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : 74 possible sky positions to use as objects from a possible 370. plFiberPlate : 31 possible sky positions to use as objects from a possible 369. plFiberPlate : 19 possible sky positions to use as objects from a possible 368. plFiberPlate : 5 possible sky positions to use as objects from a possible 367. plFiberPlate : 10 possible sky positions to use as objects from a possible 366. plFiberPlate : 21 possible sky positions to use as objects from a possible 365. plFiberPlate : 32 possible sky positions to use as objects from a possible 364. plFiberPlate : 51 possible sky positions to use as objects from a possible 363. plFiberPlate : 32 possible sky positions to use as objects from a possible 362. plFiberPlate : 20 possible sky positions to use as objects from a possible 361. plFiberPlate : 8 possible sky positions to use as objects from a possible 360. plFiberPlate : 2 possible sky positions to use as objects from a possible 359. plFiberPlate : 4 possible sky positions to use as objects from a possible 358. plFiberPlate : 8 possible sky positions to use as objects from a possible 357. plFiberPlate : 14 possible sky positions to use as objects from a possible 356. plFiberPlate : 17 possible sky positions to use as objects from a possible 355. plFiberPlate : 62 possible sky positions to use as objects from a possible 354. plFiberPlate : 55 possible sky positions to use as objects from a possible 353. plFiberPlate : 34 possible sky positions to use as objects from a possible 352. plFiberPlate : 17 possible sky positions to use as objects from a possible 351. plFiberPlate : 7 possible sky positions to use as objects from a possible 350. plFiberPlate : 15 possible sky positions to use as objects from a possible 349. plFiberPlate : 13 possible sky positions to use as objects from a possible 348. plFiberPlate : 12 possible sky positions to use as objects from a possible 347. plFiberPlate : 15 possible sky positions to use as objects from a possible 346. plFiberPlate : 23 possible sky positions to use as objects from a possible 345. plFiberPlate : 9 possible sky positions to use as objects from a possible 344. plFiberPlate : 14 possible sky positions to use as objects from a possible 343. plFiberPlate : 8 possible sky positions to use as objects from a possible 342. plFiberPlate : 4 possible sky positions to use as objects from a possible 341. plFiberPlate : 12 possible sky positions to use as objects from a possible 340. plFiberPlate : 8 possible sky positions to use as objects from a possible 339. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1860.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1861.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1861.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapP-1862.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 27 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 204 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 24 to list of science objects plFiberPlate : adding sky number 7 to list of science objects plFiberPlate : adding sky number 173 to list of science objects plFiberPlate : adding sky number 23 to list of science objects plFiberPlate : adding sky number 90 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 339 to list of science objects plFiberPlate : adding sky number 319 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 86 2 15 52 3 15 50 4 18 72 5 3 65 6 5 51 7 3 51 8 3 76 9 3 66 10 21 96 11 19 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2659 0 1 114 188 plFiberPlate : adding spectro-photo std with objId = 2659 0 6 112 30 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 96 171 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 99 66 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 108 116 plFiberPlate : adding spectro-photo std with objId = 2659 0 4 113 172 plFiberPlate : adding spectro-photo std with objId = 2659 0 3 108 6 plFiberPlate : 91 possible sky positions to use as objects from a possible 374. plFiberPlate : 54 possible sky positions to use as objects from a possible 373. plFiberPlate : 19 possible sky positions to use as objects from a possible 372. plFiberPlate : 10 possible sky positions to use as objects from a possible 371. plFiberPlate : 25 possible sky positions to use as objects from a possible 370. plFiberPlate : 15 possible sky positions to use as objects from a possible 369. plFiberPlate : 47 possible sky positions to use as objects from a possible 368. plFiberPlate : 58 possible sky positions to use as objects from a possible 367. plFiberPlate : 37 possible sky positions to use as objects from a possible 366. plFiberPlate : 21 possible sky positions to use as objects from a possible 365. plFiberPlate : 11 possible sky positions to use as objects from a possible 364. plFiberPlate : 6 possible sky positions to use as objects from a possible 363. plFiberPlate : 10 possible sky positions to use as objects from a possible 362. plFiberPlate : 4 possible sky positions to use as objects from a possible 361. plFiberPlate : 19 possible sky positions to use as objects from a possible 360. plFiberPlate : 15 possible sky positions to use as objects from a possible 359. plFiberPlate : 35 possible sky positions to use as objects from a possible 358. plFiberPlate : 16 possible sky positions to use as objects from a possible 357. plFiberPlate : 14 possible sky positions to use as objects from a possible 356. plFiberPlate : 5 possible sky positions to use as objects from a possible 355. plFiberPlate : 5 possible sky positions to use as objects from a possible 354. plFiberPlate : 10 possible sky positions to use as objects from a possible 353. plFiberPlate : 13 possible sky positions to use as objects from a possible 352. plFiberPlate : 3 possible sky positions to use as objects from a possible 351. plFiberPlate : 10 possible sky positions to use as objects from a possible 350. plFiberPlate : 32 possible sky positions to use as objects from a possible 349. plFiberPlate : 16 possible sky positions to use as objects from a possible 348. plFiberPlate : 7 possible sky positions to use as objects from a possible 347. plFiberPlate : 8 possible sky positions to use as objects from a possible 346. plFiberPlate : 5 possible sky positions to use as objects from a possible 345. plFiberPlate : 12 possible sky positions to use as objects from a possible 344. plFiberPlate : 11 possible sky positions to use as objects from a possible 343. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1861.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1862.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1862.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.06.1/plPlugMapP-1863.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 115 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 161 to list of science objects plFiberPlate : adding sky number 326 to list of science objects plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 285 to list of science objects plFiberPlate : adding sky number 226 to list of science objects plFiberPlate : adding sky number 16 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 394 to list of science objects plFiberPlate : adding sky number 392 to list of science objects plFiberPlate : adding sky number 303 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 309 to list of science objects plFiberPlate : adding sky number 267 to list of science objects plFiberPlate : adding sky number 147 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 98 2 19 56 3 17 53 4 25 79 5 4 92 6 5 53 7 4 37 8 3 77 9 5 73 10 33 120 11 20 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 23 149 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 113 161 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 26 134 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 123 71 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 112 122 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 114 239 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 110 114 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 25 8 plFiberPlate : 94 possible sky positions to use as objects from a possible 416. plFiberPlate : 56 possible sky positions to use as objects from a possible 415. plFiberPlate : 32 possible sky positions to use as objects from a possible 414. plFiberPlate : 23 possible sky positions to use as objects from a possible 413. plFiberPlate : 13 possible sky positions to use as objects from a possible 412. plFiberPlate : 19 possible sky positions to use as objects from a possible 411. plFiberPlate : 15 possible sky positions to use as objects from a possible 410. plFiberPlate : 59 possible sky positions to use as objects from a possible 409. plFiberPlate : 42 possible sky positions to use as objects from a possible 408. plFiberPlate : 11 possible sky positions to use as objects from a possible 407. plFiberPlate : 10 possible sky positions to use as objects from a possible 406. plFiberPlate : 11 possible sky positions to use as objects from a possible 405. plFiberPlate : 15 possible sky positions to use as objects from a possible 404. plFiberPlate : 8 possible sky positions to use as objects from a possible 403. plFiberPlate : 6 possible sky positions to use as objects from a possible 402. plFiberPlate : 11 possible sky positions to use as objects from a possible 401. plFiberPlate : 50 possible sky positions to use as objects from a possible 400. plFiberPlate : 40 possible sky positions to use as objects from a possible 399. plFiberPlate : 21 possible sky positions to use as objects from a possible 398. plFiberPlate : 8 possible sky positions to use as objects from a possible 397. plFiberPlate : 13 possible sky positions to use as objects from a possible 396. plFiberPlate : 15 possible sky positions to use as objects from a possible 395. plFiberPlate : 3 possible sky positions to use as objects from a possible 394. plFiberPlate : 9 possible sky positions to use as objects from a possible 393. plFiberPlate : 10 possible sky positions to use as objects from a possible 392. plFiberPlate : 21 possible sky positions to use as objects from a possible 391. plFiberPlate : 15 possible sky positions to use as objects from a possible 390. plFiberPlate : 7 possible sky positions to use as objects from a possible 389. plFiberPlate : 2 possible sky positions to use as objects from a possible 388. plFiberPlate : 6 possible sky positions to use as objects from a possible 387. plFiberPlate : 0 possible sky positions to use as objects from a possible 386. plFiberPlate: No sky found for bundle at 184.903 224.395, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 386. plFiberPlate: No sky found for bundle at 184.903 224.395, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 386. plFiberPlate: No sky found for bundle at 184.903 224.395, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 386. plFiberPlate : 1 possible sky positions to use as objects from a possible 385. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1862.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1863.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.06.1/plOverlay-1863.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu May 27 19:25:57 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 5 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1859.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.9875,-2.9239) and (-12.66,-1.44) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1859.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1859.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1860.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.8092,7.9556) and (11.05,6.27) plMakeFanucCodes : fixed path between (11.0456,6.2709) and (11.49,4.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1860.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1860.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1861.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.8322,8.1803) and (-10.27,6.36) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1861.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1861.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1862.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1862.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1862.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1863.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1863.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.06.1/plFanuc-1863.par plMakeFanucCodes : temperature difference 7.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014868 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu May 27 19:26:11 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8be8064 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 5 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1859 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1860 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1861 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1862 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1863 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu May 27 19:26:17 CDT 2004 Begin running "plateEnder dr2004.06.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_249/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_249/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.06.1 -morePipes 1" failed. PS: Read file for stderr output of this job.