[climatologyMapWoa]
## options related to plotting climatology maps of Temperature and Salinity
## fields at various levels, including the sea floor against control model
## results and WOA climatological data

# comparison grid(s) ('latlon', 'antarctic', 'arctic') on which to plot analysis
comparisonGrids = ['antarctic', 'arctic']

# list of depths in meters (positive up) at which to analyze, 'top' for the
# sea surface. Note that, for seasons='ANN', depths can be as deep as 5500 m,
# otherwise use a maximum depth of 1500 m.
depths = ['top', -10, -25, -50, -75, -100, -400, -800, -2000]

[climatologyMapWoaTemperature]
## options related to plotting climatology maps of potential temperature
## at various levels, including the sea floor against control model results
## and WOA18 climatological data

# A dictionary with keywords for the norm
normArgsResult = {'vmin': -2., 'vmax': 2.}

[climatologyMapWoaSalinity]
## options related to plotting climatology maps of salinity
## at various levels, including the sea floor against control model results
## and WOA18 climatological data

# A dictionary with keywords for the norm
normArgsResult = {'vmin': 33.8, 'vmax': 35.0}


[regionalTSDiagrams]
## options related to plotting T/S diagrams of ocean regions

# the names of region groups to plot, each with its own section below
regionGroups = ['Antarctic Regions', 'Ocean Basins']

[TSDiagramsForAntarcticRegions]
## options related to plotting T/S diagrams of Antarctic regions

# The minimum and maximum depth over which fields are plotted, default is
# to take these values from the geojson feature's zmin and zmax properties.
zmin = -1000
zmax = 0

[TSDiagramsForOceanBasins]
## options related to plotting T/S diagrams of major ocean basins

# list of regions to plot or ['all'] for all regions in the masks file.
# See "regionNames" in the antarcticRegions masks file in
# regionMaskSubdirectory for details.
regionNames = ["Atlantic_Basin", "Pacific_Basin", "Indian_Basin",
               "Arctic_Basin", "Southern_Ocean_Basin",
               "Global Ocean", "Global Ocean 65N to 65S"]


[soseTransects]
## options related to plotting model vs. Southern Ocean State Estimate (SOSE)
## transects.

# longitudes of transects
# Western Weddell 1, Filchner (318=42W), Western Weddell 2 (325=35W),
# West Maud Rise, Fimbul (0), Amery (75E), Totten (117E),
# George V coast, Merzt (145E), Wilkes (160E), Western Ross (184=176W),
# Center Ross (187=173W), Eastern Ross (198=162W),
# Amudsen, Thwaites (253=107W), Bellingshausen (280=80W),
# West Antarctica (288=72W)
# Note: Transects at 325, 145, 160, 184, 198 and 288 are chosen for comparison with
#       Whitworth et al. (1998) doi: 10.1029/AR075p0001, Figs. 3, 7, 6, 5, 4, 10, respectively.
longitudes = [318., 325., 0., 75., 117., 145., 160., 184., 187., 198., 253.,
              280., 288.]

[soseTemperatureTransects]
# options related to plotting SOSE transects of potential temperature

# whether the colormap is indexed or continuous
colormapTypeResult = indexed
# color indices into colormapName for filled contours
colormapIndicesResult = [0, 14, 28, 57, 85, 113, 125, 142, 170, 180, 198, 227,
                         240, 255]
# colormap levels/values for contour boundaries
colorbarLevelsResult = [-1.6, -1.2, -0.4, 0.0, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0,
                        3.0, 4.0, 6.0]

# whether the colormap is indexed or continuous
colormapTypeDifference = indexed
# color indices into colormapName for filled contours
colormapIndicesDifference = [0, 28, 57, 85, 113, 128, 128, 142, 170, 198, 227,
                             255]
# colormap levels/values for contour boundaries
colorbarLevelsDifference = [-2, -1.5, -1.25, -1, -0.2, 0, 0.2, 1, 1.25, 1.5, 2]

[soseSalinityTransects]
## options related to plotting SOSE transects of salinity

# whether the colormap is indexed or continuous
colormapTypeResult = indexed
# color indices into colormapName for filled contours
colormapIndicesResult = [0, 20, 40, 80, 120, 140, 160, 180, 200, 220, 240, 255]
# colormap levels/values for contour boundaries
colorbarLevelsResult = [34.1, 34.2,  34.3,  34.4,  34.5, 34.55, 34.6, 34.65,
                        34.68, 34.7, 35.0]

# whether the colormap is indexed or continuous
colormapTypeDifference = indexed
# color indices into colormapName for filled contours
colormapIndicesDifference = [0, 28, 57, 85, 113, 128, 128, 142, 170, 198, 227,
                             255]
# colormap levels/values for contour boundaries
colorbarLevelsDifference = [-0.5, -0.2, -0.1, -0.05, -0.02, 0,  0.02, 0.05,
                            0.1, 0.2, 0.5]


[woceTransects]
## options related to plotting model vs. World Ocean Circulation Experiment
## (WOCE) transects.

# Horizontal bounds of the plot (in km), or an empty list for automatic bounds
# The bounds are a 2-element list of the minimum and maximum distance along the
# transect
horizontalBounds = {'WOCE_A21': [630., 830.],
                    'WOCE_A23': [0., 200.],
                    'WOCE_A12': [4620., 4820.]}

[woceTemperatureTransects]
## options related to plotting WOCE transects of potential temperature

# whether the colormap is indexed or continuous
colormapTypeResult = indexed
# color indices into colormapName for filled contours
colormapIndicesResult = [0, 14, 28, 57, 85, 113, 125, 142, 170, 180, 198, 227,
                         240, 255]
# colormap levels/values for contour boundaries
colorbarLevelsResult = [-1.6, -1.2, -0.4, 0.0, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0,
                        3.0, 4.0, 6.0]

# whether the colormap is indexed or continuous
colormapTypeDifference = indexed
# color indices into colormapName for filled contours
colormapIndicesDifference = [0, 28, 57, 85, 113, 128, 128, 142, 170, 198, 227,
                             255]
# colormap levels/values for contour boundaries
colorbarLevelsDifference = [-2, -1.5, -1.25, -1, -0.2, 0, 0.2, 1, 1.25, 1.5, 2]

[woceSalinityTransects]
## options related to plotting WOCE transects of salinity

# whether the colormap is indexed or continuous
colormapTypeResult = indexed
# color indices into colormapName for filled contours
colormapIndicesResult = [0, 20, 40, 80, 120, 140, 160, 180, 200, 220, 240, 255]
# colormap levels/values for contour boundaries
colorbarLevelsResult = [34.1, 34.2,  34.3,  34.4,  34.5, 34.55, 34.6, 34.65,
                        34.68, 34.7, 35.0]

# whether the colormap is indexed or continuous
colormapTypeDifference = indexed
# color indices into colormapName for filled contours
colormapIndicesDifference = [0, 28, 57, 85, 113, 128, 128, 142, 170, 198, 227,
                             255]
# colormap levels/values for contour boundaries
colorbarLevelsDifference = [-0.5, -0.2, -0.1, -0.05, -0.02, 0,  0.02, 0.05,
                            0.1, 0.2, 0.5]

[oceanRegionalProfiles]
## options related to plotting vertical profiles of regional means (and
## variability) of 3D MPAS fields

# Times for comparison times (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct,
# Nov, Dec, JFM, AMJ, JAS, OND, ANN)
seasons =  ['ANN']

# minimum and maximum depth of profile plots, or empty for the full depth range
depthRange = [-600., 0.]

# The suffix on the regional mask file to be used to determine the regions to
# plot.  A region mask file should be in the regionMaskDirectory and should
# be named <mpasMeshName>_<regionMaskSuffix>.nc
regionMaskSuffix = antarcticRegions

# a list of region names from the region masks file to plot
regionNames = ["Southern Ocean 60S", "Weddell Sea Shelf",
               "Weddell Sea Deep", "Bellingshausen Sea Shelf",
               "Bellingshausen Sea Deep", "Amundsen Sea Shelf",
               "Amundsen Sea Deep", "Eastern Ross Sea Shelf",
               "Eastern Ross Sea Deep", "Western Ross Sea Shelf",
               "Western Ross Sea Deep",  "East Antarctic Seas Shelf",
               "East Antarctic Seas Deep"]

# Make Hovmoller plots of fields vs time and depth?
plotHovmoller = True

# web gallery options
hovmollerGalleryGroup = Antarctic Regional Time Series vs Depths

# web gallery options
profileGalleryGroup = Antarctic Regional Profiles


[temperatureOceanRegionalHovmoller]
## options related to plotting time series of temperature vs. depth in ocean
## regions

# A dictionary with keywords for the norm
normArgsResult = {'vmin': -2., 'vmax': 3.}
normArgsDifference = {'vmin': -2., 'vmax': 2.}

# Number of months over which to compute moving average
movingAverageMonths = 12

# limits on depth, the full range by default
yLim = [-600., -5.]


[salinityOceanRegionalHovmoller]
## options related to plotting time series of salinity vs. depth in ocean
## regions

# A dictionary with keywords for the norm
normArgsResult = {'vmin': 33., 'vmax': 35.}
normArgsDifference = {'vmin': -0.5, 'vmax': 0.5}

# Number of months over which to compute moving average
movingAverageMonths = 12

# limits on depth, the full range by default
yLim = [-600., -5.]


[potentialDensityOceanRegionalHovmoller]
## options related to plotting time series of potential density vs. depth in
## ocean regions

# A dictionary with keywords for the norm
normArgsResult = {'vmin': 1026.5, 'vmax': 1028.}
normArgsDifference = {'vmin': -0.3, 'vmax': 0.3}

# Number of months over which to compute moving average
movingAverageMonths = 12

# limits on depth, the full range by default
yLim = [-600., -5.]
