const Double_t ymin  = -1.2 ;
const Double_t ymax  =  1.2 ;
const Double_t cosminTS = -1.05;
const Double_t cosmaxTS =  1.05;
const Double_t cosmin = 0.7;
const Double_t cosmax =  1.02;
const Double_t cTmin = 0;  // micron
const Double_t cTmax = 300;  // micron
const Double_t dcamin = 0;  // micron
const Double_t dcamax = 600;  // micron
const Double_t d0xd0min = -80000;  // micron
const Double_t d0xd0max = 100000;  // micron
const Double_t phimin = 0.0;  
const Int_t    mintrackrefsTPC = 2 ;
const Int_t    mintrackrefsITS = 3 ;
const Int_t    charge  = 1 ;
const Int_t    minclustersTPC = 50 ;
// cuts
const Double_t ptmin = 0.1;
const Double_t ptmax = 9999.;
const Double_t etamin = -0.9;
const Double_t etamax = 0.9;
const Double_t zmin = -15;
const Double_t zmax = 15;
const Int_t    minITSClusters = 5;

const Float_t centmin_0_10 = 0.;
const Float_t centmax_0_10 = 10.;
const Float_t centmin_10_60 = 10.;
const Float_t centmax_10_60 = 60.;
const Float_t centmin_60_100 = 60.;
const Float_t centmax_60_100 = 100.;
const Float_t centmax = 100.;
const Float_t fakemin = -0.5;
const Float_t fakemax = 2.5.;
const Float_t cosminXY = 0.95;
const Float_t cosmaxXY = 1.0;
const Float_t normDecLXYmin = 0;
const Float_t normDecLXYmax = 20;
const Float_t multmin_0_20 = 0;
const Float_t multmax_0_20 = 20;
const Float_t multmin_20_50 = 20;
const Float_t multmax_20_50 = 50;
const Float_t multmin_50_80 = 50;
const Float_t multmax_50_80 = 80;
const Float_t multmin_80_100 = 80;
const Float_t multmax_80_100 = 100;
const Float_t multmin_100_400 = 100;
const Float_t multmax_100_400 = 400;


//----------------------------------------------------

AliCFTaskVertexingHF *AddTaskCFVertexingHFCascade(const char* cutFile = "DStartoKpipiCuts010.root", TString cutObjectName="DStartoKpipiCuts", TString suffix="suf", Int_t configuration = AliCFTaskVertexingHF::kCheetah, Bool_t isKeepDfromB=kFALSE, Bool_t isKeepDfromBOnly=kFALSE, Int_t pdgCode = 413, Char_t isSign = 2, Bool_t useWeight=kTRUE, Bool_t useFlatPtWeight=kFALSE, Bool_t useZWeight=kFALSE, Bool_t useNchWeight=kFALSE, Bool_t useNtrkWeight=kFALSE, TString estimatorFilename="", Int_t multiplicityEstimator = AliCFTaskVertexingHF::kNtrk10, Bool_t isPPData=kFALSE, Bool_t isPPbData=kFALSE, Double_t refMult=9.26, Bool_t isFineNtrkBin=kFALSE)
{
	printf("Adding CF task using cuts from file %s\n",cutFile);
	if (configuration == AliCFTaskVertexingHF::kSnail){
		printf("The configuration is set to be SLOW --> all the variables will be used to fill the CF\n");
	}
	else if (configuration == AliCFTaskVertexingHF::kCheetah){
		printf("The configuration is set to be FAST --> using only pt, y, ct, phi, zvtx, centrality, fake, multiplicity to fill the CF\n");
	}
	else{
		printf("The configuration is not defined! returning\n");
		return;
	}
	       
	gSystem->Sleep(2000);

	// isSign = 0 --> D* only
	// isSign = 1 --> D*bar only
	// isSign = 2 --> D* + D*bar

	TString expected;
	if (isSign == 0 && pdgCode < 0){
		AliError(Form("Error setting PDG code (%d) and sign (0 --> D* only): they are not compatible, returning"));
		return 0x0;
	}
	else if (isSign == 1 && pdgCode > 0){
		AliError(Form("Error setting PDG code (%d) and sign (1 --> D*bar only): they are not compatible, returning"));
		return 0x0;
	}
	else if (isSign > 2 || isSign < 0){
		AliError(Form("Sign not valid (%d, possible values are 0, 1, 2), returning"));
		return 0x0;
	}

	TFile* fileCuts = TFile::Open(cutFile);
	if(!fileCuts || (fileCuts && !fileCuts->IsOpen())){ 
	  AliError("Wrong cut file");
	  return 0x0;
	}

	AliRDHFCutsDStartoKpipi *cutsDStartoKpi = (AliRDHFCutsDStartoKpipi*)fileCuts->Get(cutObjectName.Data());
	
	// check that the fKeepD0fromB flag is set to true when the fKeepD0fromBOnly flag is true
	//  for now the binning is the same than for all D's
	if(isKeepDfromBOnly) isKeepDfromB = true;
	
	Double_t ptmin_0_6;
	Double_t ptmax_0_6;
	Double_t ptmin_6_8;
	Double_t ptmax_6_8;
	Double_t ptmin_8_16;
	Double_t ptmax_8_16;
	Double_t ptmin_16_24;
	Double_t ptmax_16_24;
	
	ptmin_0_6 =  0.0 ;
	ptmax_0_6 =  6.0 ;
	ptmin_6_8 =  6.0 ;
	ptmax_6_8 =  8.0 ;
	ptmin_8_16 =  8.0 ;
	ptmax_8_16 =  16.0 ;
	ptmin_16_24 =  16.0 ;
	ptmax_16_24 =  24.0 ;


	//CONTAINER DEFINITION
	Info("AliCFTaskVertexingHF","SETUP CONTAINER");
	const Double_t phimax = 2*TMath::Pi();
	UInt_t nstep = 10; //number of selection steps: MC with limited acceptance, MC, Acceptance, Vertex, Refit, Reco (no cuts), RecoAcceptance, RecoITSClusters (RecoAcceptance included), RecoPPR (RecoAcceptance+RecoITSCluster included), RecoPID 

	//const UInt_t ipT, iy, icosThetaStar, ipTpi, ipTk, icT, idca, id0xd0, ipointing, iphi, izvtx, icent, ifake, ipointingXY, iNormDecayLXY, imult;
        const Int_t nbiny  = 24 ; //bins in y
        const Int_t nbincosThetaStar  = 42 ; //bins in cosThetaStar 
        const Int_t nbincT  = 15 ; //bins in cT
        const Int_t nbindca  = 20 ; //bins in dca
        const Int_t nbind0xd0  = 90 ; //bins in d0xd0
        const Int_t nbinpointing  = 50 ; //bins in cosPointingAngle
        const Int_t nbinphi  = 18 ; //bins in Phi
        const Int_t nbinzvtx  = 30 ; //bins in z vertex
        const Int_t nbincent = 28;  //bins in centrality
        const Int_t nbincent_0_10 = 4;  //bins in centrality between 0 and 10
        const Int_t nbincent_10_60 = 20;  //bins in centrality between 10 and 60
        const Int_t nbincent_60_100 = 4;  //bins in centrality between 60 and 100
        const Int_t nbinfake = 3;  //bins in fake
        const Int_t nbinpointingXY = 50;  //bins in cosPointingAngleXY
        const Int_t nbinnormDecayLXY = 20;  //bins in NormDecayLengthXY
	const Int_t nbinmult = 49;  //bins in multiplicity (total number)
        const Int_t nbinmult_0_20 = 20; //bins in multiplicity between 0 and 20
        const Int_t nbinmult_20_50 = 15; //bins in multiplicity between 20 and 50
        const Int_t nbinmult_50_80 = 10; //bins in multiplicity between 50 and 80
        const Int_t nbinmult_80_100 = 4; //bins in multiplicity between 80 and 100
        const Int_t nbinmult_100_400 = 3; //bins in multiplicity between 100 and 400
	if(isPPbData) nbinmult += nbinmult_100_400;


	//the sensitive variables, their indices

	const Int_t nvarTot   = 16 ; //number of variables on the grid:pt, y, cosThetaStar, pTpi, pTk, cT, dca, d0pi, d0K, d0xd0, cosPointingAngle, phi, z, centrality, fake, cosPointingAngleXY, normDecayLengthXY, multiplicity

	// variables' indices
	const UInt_t ipT = 0;
	const UInt_t iy  = 1;
	const UInt_t icosThetaStar  = 2;
	const UInt_t ipTpi  = 3;
	const UInt_t ipTk  = 4;
	const UInt_t icT  = 5;
	const UInt_t idca  = 6;
	const UInt_t id0xd0  = 7;
	const UInt_t ipointing  = 8;
	const UInt_t iphi  = 9;
	const UInt_t izvtx  = 10;
	const UInt_t icent = 11;
	const UInt_t ifake = 12;
	const UInt_t ipointingXY = 13;
	const UInt_t inormDecayLXY = 14;
	const UInt_t imult = 15;
	
	//Setting the bins: pt, ptPi, and ptK are considered seprately because for them you can either define the binning by hand, or using the cuts file
	
	//arrays for the number of bins in each dimension
	Int_t iBin[nvarTot];
		
	const Int_t nbinpt = cutsDStartoKpi->GetNPtBins(); // bins in pT
	iBin[ipT]=nbinpt;
	iBin[ipTpi]=nbinpt;
	iBin[ipTk]=nbinpt;
	Double_t *binLimpT=new Double_t[iBin[ipT]+1];
	Double_t *binLimpTpi=new Double_t[iBin[ipTpi]+1];
	Double_t *binLimpTk=new Double_t[iBin[ipTk]+1];
	// values for bin lower bounds
	Float_t* floatbinLimpT = cutsDStartoKpi->GetPtBinLimits();
	for (Int_t ibin0 = 0 ; ibin0<iBin[ipT]+1; ibin0++){
		binLimpT[ibin0] = (Double_t)floatbinLimpT[ibin0];
		binLimpTpi[ibin0] = (Double_t)floatbinLimpT[ibin0];
		binLimpTk[ibin0] = (Double_t)floatbinLimpT[ibin0];
	}
	for(Int_t i=0; i<=nbinpt; i++) printf("binLimpT[%d]=%f\n",i,binLimpT[i]);  
	
	printf("pT: nbin (from cuts file) = %d\n",nbinpt);


	





	// Fine Ntrk binning setting
	Double_t *binLimmultFine;
	Int_t nbinmultTmp=nbinmult;
	if (isFineNtrkBin) {
		Int_t nbinLimmultFine = 100;
		if (isPPbData) nbinLimmultFine = 200;
		const UInt_t nbinMultFine = nbinLimmultFine;
		binLimmultFine = new Double_t[nbinMultFine+1];
		for (Int_t ibin0 = 0; ibin0 < nbinMultFine+1; ibin0++) {
			binLimmultFine[ibin0] = ibin0;
		}
		nbinmultTmp = nbinLimmultFine;
	}
	const Int_t nbinmultTot = nbinmultTmp;

	// defining now the binning for the other variables:
	
	AliLog::SetClassDebugLevel("AliCFManager",AliLog::kInfo);

	iBin[iy]=nbiny;
	iBin[icosThetaStar]=nbincosThetaStar;
	iBin[icT]=nbincT;
	iBin[idca]=nbindca;
	iBin[id0xd0]=nbind0xd0;
	iBin[ipointing]=nbinpointing;
	iBin[iphi]=nbinphi;
	iBin[izvtx]=nbinzvtx;
	iBin[icent]=nbincent;
	iBin[ifake]=nbinfake;
	iBin[ipointingXY]=nbinpointingXY;
	iBin[inormDecayLXY]=nbinnormDecayLXY;
	iBin[imult]=nbinmultTot;
	
	//arrays for lower bounds :
	Double_t *binLimy=new Double_t[iBin[iy]+1];
	Double_t *binLimcosThetaStar=new Double_t[iBin[icosThetaStar]+1];
	Double_t *binLimcT=new Double_t[iBin[icT]+1];
	Double_t *binLimdca=new Double_t[iBin[idca]+1];
	Double_t *binLimd0xd0=new Double_t[iBin[id0xd0]+1];
	Double_t *binLimpointing=new Double_t[iBin[ipointing]+1];
	Double_t *binLimphi=new Double_t[iBin[iphi]+1];
	Double_t *binLimzvtx=new Double_t[iBin[izvtx]+1];
	Double_t *binLimcent=new Double_t[iBin[icent]+1];
	Double_t *binLimfake=new Double_t[iBin[ifake]+1];
	Double_t *binLimpointingXY=new Double_t[iBin[ipointingXY]+1];
	Double_t *binLimnormDecayLXY=new Double_t[iBin[inormDecayLXY]+1];
	Double_t *binLimmult=new Double_t[iBin[imult]+1];


	// y
        for(Int_t i=0; i<=nbiny; i++) binLimy[i]=(Double_t)ymin  + (ymax-ymin)  /nbiny*(Double_t)i ;

        // cosThetaStar
        for(Int_t i=0; i<=nbincosThetaStar; i++) binLimcosThetaStar[i]=(Double_t)cosminTS  + (cosmaxTS-cosminTS)  /nbincosThetaStar*(Double_t)i ;
        
        // cT
        for(Int_t i=0; i<=nbincT; i++) binLimcT[i]=(Double_t)cTmin  + (cTmax-cTmin)  /nbincT*(Double_t)i ;

        // dca
        for(Int_t i=0; i<=nbindca; i++) binLimdca[i]=(Double_t)dcamin  + (dcamax-dcamin)  /nbindca*(Double_t)i ;

        // d0xd0
        for(Int_t i=0; i<=nbind0xd0; i++) binLimd0xd0[i]=(Double_t)d0xd0min  + (d0xd0max-d0xd0min)  /nbind0xd0*(Double_t)i ;

        // cosPointingAngle
        for(Int_t i=0; i<=nbinpointing; i++) binLimpointing[i]=(Double_t)cosmin  + (cosmax-cosmin)  /nbinpointing*(Double_t)i ;

        // Phi
        for(Int_t i=0; i<=nbinphi; i++) binLimphi[i]=(Double_t)phimin  + (phimax-phimin)  /nbinphi*(Double_t)i ;

        // z Primary Vertex
        for(Int_t i=0; i<=nbinzvtx; i++) {
                binLimzvtx[i]=(Double_t)zmin  + (zmax-zmin)  /nbinzvtx*(Double_t)i ;
        }

        // centrality
        for(Int_t i=0; i<=nbincent_0_10; i++) binLimcent[i]=(Double_t)centmin_0_10 + (centmax_0_10-centmin_0_10)/nbincent_0_10*(Double_t)i ; 
        if (binLimcent[nbincent_0_10] != centmin_10_60)  {
                Error("AliCFHeavyFlavourTaskMultiVarMultiStep","Calculated bin lim for cent - 1st range - differs from expected!\n");
        }
        for(Int_t i=0; i<=nbincent_10_60; i++) binLimcent[i+nbincent_0_10]=(Double_t)centmin_10_60 + (centmax_10_60-centmin_10_60)/nbincent_10_60*(Double_t)i ;
        if (binLimcent[nbincent_0_10+nbincent_10_60] != centmin_60_100)  {
                Error("AliCFHeavyFlavourTaskMultiVarMultiStep","Calculated bin lim for cent - 2st range - differs from expected!\n");
        }
        for(Int_t i=0; i<=nbincent_60_100; i++) binLimcent[i+nbincent_0_10+nbincent_10_60]=(Double_t)centmin_60_100 + (centmax_60_100-centmin_60_100)/nbincent_60_100*(Double_t)i ;

        // fake
        for(Int_t i=0; i<=nbinfake; i++) {
          binLimfake[i]=(Double_t)fakemin  + (fakemax-fakemin)/nbinfake * (Double_t)i;
        }

        // cosPointingAngleXY
        for(Int_t i=0; i<=nbinpointingXY; i++) binLimpointingXY[i]=(Double_t)cosminXY  + (cosmaxXY-cosminXY)  /nbinpointingXY*(Double_t)i ;

        // normDecayLXY
        for(Int_t i=0; i<=nbinnormDecayLXY; i++) binLimnormDecayLXY[i]=(Double_t)normDecLXYmin  + (normDecLXYmax-normDecLXYmin)  /nbinnormDecayLXY*(Double_t)i ;


	// multiplicity
        for(Int_t i=0; i<=nbinmult_0_20; i++) binLimmult[i]=(Double_t)multmin_0_20 + (multmax_0_20-multmin_0_20)/nbinmult_0_20*(Double_t)i ; 
        if (binLimmult[nbinmult_0_20] != multmin_20_50)  {
                Error("AliCFHeavyFlavourTaskMultiVarMultiStep","Calculated bin lim for mult - 1st range - differs from expected!\n");
        }
        for(Int_t i=0; i<=nbinmult_20_50; i++) binLimmult[i+nbinmult_0_20]=(Double_t)multmin_20_50 + (multmax_20_50-multmin_20_50)/nbinmult_20_50*(Double_t)i ; 
        if (binLimmult[nbinmult_0_20+nbinmult_20_50] != multmin_50_80)  {
                Error("AliCFHeavyFlavourTaskMultiVarMultiStep","Calculated bin lim for mult - 2nd range - differs from expected!\n");
        }
        for(Int_t i=0; i<=nbinmult_50_80; i++) binLimmult[i+nbinmult_0_20+nbinmult_20_50]=(Double_t)multmin_50_80 + (multmax_50_80-multmin_50_80)/nbinmult_50_80*(Double_t)i ; 
        if (binLimmult[nbinmult_0_20+nbinmult_20_50+nbinmult_50_80] != multmin_80_100)  {
                Error("AliCFHeavyFlavourTaskMultiVarMultiStep","Calculated bin lim for mult - 3rd range - differs from expected!\n");
        }
        for(Int_t i=0; i<=nbinmult_80_100; i++) binLimmult[i+nbinmult_0_20+nbinmult_20_50+nbinmult_50_80]=(Double_t)multmin_80_100 + (multmax_80_100-multmin_80_100)/nbinmult_80_100*(Double_t)i ; 
        if (binLimmult[nbinmult_0_20+nbinmult_20_50+nbinmult_50_80+nbinmult_80_100] != multmin_100_400) {
                Error("AliCFHeavyFlavourTaskMultiVarMultiStep","Calculated bin lim for mult - 4th range - differs from expected!\n");
        }
	if(isPPbData){
	  for (Int_t i = 0; i<=nbinmult_100_400; i++) binLimmult[i+nbinmult_0_20+nbinmult_20_50+nbinmult_50_80+nbinmult_80_100]= (Double_t)multmin_100_400 + (multmax_100_400-multmin_100_400)/nbinmult_100_400*(Double_t)i ;
	}

	//one "container" for MC
	TString nameContainer="";
	if(!isKeepDfromB) {
		nameContainer="CFHFccontainer0";
	}
	else  if(isKeepDfromBOnly){
		nameContainer="CFHFccontainer0DfromB";
	}
	else  {
		nameContainer="CFHFccontainer0allD";	  
	}
	nameContainer += suffix;
	//Setting up the container grid... 

	AliCFContainer* container;

	if (configuration == AliCFTaskVertexingHF::kSnail){
		container = new AliCFContainer(nameContainer,"container for tracks",nstep,nvarTot,iBin);
		//setting the bin limits
		printf("pt\n");
		container -> SetBinLimits(ipT,binLimpT);
		printf("y\n");
		container -> SetBinLimits(iy,binLimy);
		printf("cts\n");
		container -> SetBinLimits(icosThetaStar,binLimcosThetaStar);
		printf("ptPi\n");
		container -> SetBinLimits(ipTpi,binLimpTpi);
		printf("ptK\n");
		container -> SetBinLimits(ipTk,binLimpTk);
		printf("cT\n");
		container -> SetBinLimits(icT,binLimcT);
		printf("dca\n");
		container -> SetBinLimits(idca,binLimdca);
		printf("d0xd0\n");
		container -> SetBinLimits(id0xd0,binLimd0xd0);
		printf("pointing\n");
		container -> SetBinLimits(ipointing,binLimpointing);
		printf("phi\n");
		container -> SetBinLimits(iphi,binLimphi);
		printf("z\n");
		container -> SetBinLimits(izvtx,binLimzvtx);
		printf("cent\n");
		container -> SetBinLimits(icent,binLimcent);
		printf("fake\n");
		container -> SetBinLimits(ifake,binLimfake);
		printf("pointingXY\n");
		container -> SetBinLimits(ipointingXY,binLimpointingXY);
		printf("normDecayLXY\n");
		container -> SetBinLimits(inormDecayLXY,binLimnormDecayLXY);
		printf("multiplicity\n");
		
		if (isFineNtrkBin) container->SetBinLimits(imult,binLimmultFine);
		else 		   container -> SetBinLimits(imult,binLimmult);

		container -> SetVarTitle(ipT,"pt");
		container -> SetVarTitle(iy,"y");
		container -> SetVarTitle(icosThetaStar, "cosThetaStar");
		container -> SetVarTitle(ipTpi, "ptpi");
		container -> SetVarTitle(ipTk, "ptK");
		container -> SetVarTitle(icT, "ct");
		container -> SetVarTitle(idca, "dca");
		container -> SetVarTitle(id0xd0, "d0xd0");
		container -> SetVarTitle(ipointing, "pointing");
		container -> SetVarTitle(iphi, "phi");
		container -> SetVarTitle(izvtx, "zvtx");
		container -> SetVarTitle(icent, "centrality");
		container -> SetVarTitle(ifake, "fake");
		container -> SetVarTitle(ipointingXY, "piointingXY");
		container -> SetVarTitle(inormDecayLXY, "normDecayLXY");
		container -> SetVarTitle(imult, "multiplicity");
	}
	else if (configuration == AliCFTaskVertexingHF::kCheetah){
		//arrays for the number of bins in each dimension
		const Int_t nvar = 8;

		const UInt_t ipTFast = 0;
		const UInt_t iyFast = 1;
		const UInt_t icTFast = 2;
		const UInt_t iphiFast = 3;
		const UInt_t izvtxFast = 4;
		const UInt_t icentFast = 5;
		const UInt_t ifakeFast = 6;
		const UInt_t imultFast = 7;

		Int_t iBinFast[nvar];
		iBinFast[ipTFast] = iBin[ipT];
		iBinFast[iyFast] = iBin[iy];
		iBinFast[icTFast] = iBin[icT];
		iBinFast[iphiFast] = iBin[iphi];
		iBinFast[izvtxFast] = iBin[izvtx];
		iBinFast[icentFast] = iBin[icent];
		iBinFast[ifakeFast] = iBin[ifake];
		iBinFast[imultFast] = iBin[imult];

		container = new AliCFContainer(nameContainer,"container for tracks",nstep,nvar,iBinFast);
		printf("pt\n");
		container -> SetBinLimits(ipTFast,binLimpT);
		printf("y\n");
		container -> SetBinLimits(iyFast,binLimy);
		printf("ct\n");
		container -> SetBinLimits(icTFast,binLimcT);
		printf("phi\n");
		container -> SetBinLimits(iphiFast,binLimphi);
		printf("zvtx\n");
		container -> SetBinLimits(izvtxFast,binLimzvtx);
		printf("centrality\n");
		container -> SetBinLimits(icentFast,binLimcent);
		printf("fake\n");
		container -> SetBinLimits(ifakeFast,binLimfake);
		printf("multiplicity\n");
		if(isFineNtrkBin) container -> SetBinLimits(imultFast,binLimmultFine);
		else              container -> SetBinLimits(imultFast,binLimmult);

		container -> SetVarTitle(ipTFast,"pt");
		container -> SetVarTitle(iyFast,"y");
		container -> SetVarTitle(icTFast, "ct");
		container -> SetVarTitle(iphiFast, "phi");
		container -> SetVarTitle(izvtxFast, "zvtx");
		container -> SetVarTitle(icentFast, "centrality");
		container -> SetVarTitle(ifakeFast, "fake");
		container -> SetVarTitle(imultFast, "multiplicity");
	}

	container -> SetStepTitle(0, "MCLimAcc");
	container -> SetStepTitle(1, "MC");
        container -> SetStepTitle(2, "MCAcc");
        container -> SetStepTitle(3, "RecoVertex");
        container -> SetStepTitle(4, "RecoRefit");
        container -> SetStepTitle(5, "Reco");
        container -> SetStepTitle(6, "RecoAcc");
	container -> SetStepTitle(7, "RecoITSCluster");
	container -> SetStepTitle(8, "RecoCuts");
	container -> SetStepTitle(9, "RecoPID");

	//return container;

	//CREATE THE  CUTS -----------------------------------------------
	
	// Gen-Level kinematic cuts
	AliCFTrackKineCuts *mcKineCuts = new AliCFTrackKineCuts("mcKineCuts","MC-level kinematic cuts");
	
	//Particle-Level cuts:  
	AliCFParticleGenCuts* mcGenCuts = new AliCFParticleGenCuts("mcGenCuts","MC particle generation cuts");
	Bool_t useAbsolute = kTRUE;
	if (isSign != 2){
		useAbsolute = kFALSE;
	}
	mcGenCuts->SetRequirePdgCode(pdgCode, useAbsolute);  // kTRUE set in order to include D0_bar
	mcGenCuts->SetAODMC(1); //special flag for reading MC in AOD tree (important)
	
	// Acceptance cuts:
	AliCFAcceptanceCuts* accCuts = new AliCFAcceptanceCuts("accCuts", "Acceptance cuts");
	AliCFTrackKineCuts *kineAccCuts = new AliCFTrackKineCuts("kineAccCuts","Kine-Acceptance cuts");
	kineAccCuts->SetPtRange(ptmin,ptmax);
	kineAccCuts->SetEtaRange(etamin,etamax);

	// Rec-Level kinematic cuts
	AliCFTrackKineCuts *recKineCuts = new AliCFTrackKineCuts("recKineCuts","rec-level kine cuts");
	
	AliCFTrackQualityCuts *recQualityCuts = new AliCFTrackQualityCuts("recQualityCuts","rec-level quality cuts");
	
	AliCFTrackIsPrimaryCuts *recIsPrimaryCuts = new AliCFTrackIsPrimaryCuts("recIsPrimaryCuts","rec-level isPrimary cuts");
	
	printf("CREATE MC KINE CUTS\n");
	TObjArray* mcList = new TObjArray(0) ;
	mcList->AddLast(mcKineCuts);
	mcList->AddLast(mcGenCuts);
	
	printf("CREATE ACCEPTANCE CUTS\n");
	TObjArray* accList = new TObjArray(0) ;
	accList->AddLast(kineAccCuts);

	printf("CREATE RECONSTRUCTION CUTS\n");
	TObjArray* recList = new TObjArray(0) ;   // not used!! 
	recList->AddLast(recKineCuts);
	recList->AddLast(recQualityCuts);
	recList->AddLast(recIsPrimaryCuts);
	
	TObjArray* emptyList = new TObjArray(0);

	//CREATE THE INTERFACE TO CORRECTION FRAMEWORK USED IN THE TASK
	printf("CREATE INTERFACE AND CUTS\n");
	AliCFManager* man = new AliCFManager() ;
	man->SetParticleContainer(container);
	man->SetParticleCutsList(0 , mcList); // MC, Limited Acceptance
	man->SetParticleCutsList(1 , mcList); // MC
	man->SetParticleCutsList(2 , accList); // Acceptance 
	man->SetParticleCutsList(3 , emptyList); // Vertex 
	man->SetParticleCutsList(4 , emptyList); // Refit 
	man->SetParticleCutsList(5 , emptyList); // AOD
	man->SetParticleCutsList(6 , emptyList); // AOD in Acceptance
	man->SetParticleCutsList(7 , emptyList); // AOD with required n. of ITS clusters
	man->SetParticleCutsList(8 , emptyList); // AOD Reco (PPR cuts implemented in Task)
	man->SetParticleCutsList(9 , emptyList); // AOD Reco PID
	
	// Get the pointer to the existing analysis manager via the static access method.
	//==============================================================================
	AliAnalysisManager *mgr = AliAnalysisManager::GetAnalysisManager();
	if (!mgr) {
	  ::Error("AddTaskCompareHF", "No analysis manager to connect to.");
	  return NULL;
	}   
	//CREATE THE TASK
	printf("CREATE TASK\n");

	// create the task
	AliCFTaskVertexingHF *task = new AliCFTaskVertexingHF("AliCFTaskVertexingHF",cutsDStartoKpi);
	task->SetConfiguration(configuration);
	task->SetFillFromGenerated(kFALSE);
	task->SetCFManager(man); //here is set the CF manager
	task->SetDecayChannel(21);
	task->SetUseFlatPtWeight(useFlatPtWeight); 
	task->SetUseWeight(useWeight);
	task->SetUseZWeight(useZWeight);
	task->SetSign(isSign);
	task->SetCentralitySelection(kFALSE);
	task->SetFakeSelection(0);
	task->SetRejectCandidateIfNotFromQuark(kTRUE); // put to false if you want to keep HIJING D0!!
	task->SetUseMCVertex(kFALSE); // put to true if you want to do studies on pp
	//task->SetPtWeightsFromDataPbPb276overLHC12a17a();


	if (isKeepDfromB && !isKeepDfromBOnly) task->SetDselection(2);
	if (isKeepDfromB && isKeepDfromBOnly) task->SetDselection(1);	

	TF1* funcWeight = 0x0;
	if (task->GetUseWeight()) {
		funcWeight = (TF1*)fileCuts->Get("funcWeight");
		if (funcWeight == 0x0){
			Printf("FONLL Weights will be used");
		}
		else {
			task->SetWeightFunction(funcWeight);
			Printf("User-defined Weights will be used. The function being:");
			task->GetWeightFunction()->Print();
		}
	}

	if(useNchWeight || useNtrkWeight){
          TH1F *hNchPrimaries;
	  TH1F *hNchMeasured;		
	  if (isPPbData) hNchPrimaries = (TH1F*)fileCuts->Get("hNtrUnCorrEvWithCandWeight");
	  else hNchPrimaries = (TH1F*)fileCuts->Get("hGenPrimaryParticlesInelGt0");
	  hNchMeasured = (TH1F*)fileCuts->Get("hNchMeasured");
          if(hNchPrimaries) {
            task->SetUseNchWeight(kTRUE);
            task->SetMCNchHisto(hNchPrimaries);
	    if(isPPbData) task->SetUseNchTrackletsWeight();
          } else {
            AliFatal("Histogram for multiplicity weights not found");
            return 0x0;
          }
	  if(hNchMeasured) task->SetMeasuredNchHisto(hNchMeasured);
	  if(useNtrkWeight) task->SetUseNchTrackletsWeight();
        }

	task->SetMultiplicityEstimator(multiplicityEstimator);
	if(estimatorFilename.EqualTo("") ) {
	  printf("Estimator file not provided, multiplicity corrected histograms will not be filled\n");
	  task->SetUseZvtxCorrectedNtrkEstimator(kFALSE);
	} else{
	  TFile* fileEstimator=TFile::Open(estimatorFilename.Data());
	  if(!fileEstimator)  {
	    AliFatal("File with multiplicity estimator not found"); 
	    return;
	  }      
	  task->SetUseZvtxCorrectedNtrkEstimator(kTRUE);
	  task->SetReferenceMultiplcity(refMult);
	  
	  if (isPPbData) {  //load multiplicity estimators for pPb
	    task->SetIsPPbData(kTRUE);
	    const Char_t* periodNames[2] = {"LHC13b", "LHC13c"};
	    TProfile *multEstimatorAvg[2];
	    for (Int_t ip=0; ip < 2; ip++) {
	      multEstimatorAvg[ip] = (TProfile*)(fileEstimator->Get(Form("SPDmult10_%s",periodNames[ip]))->Clone(Form("SPDmult10_%s_clone",periodNames[ip])));    
	      if (!multEstimatorAvg[ip]) {
		AliFatal(Form("Multiplicity estimator for %s not found! Please check your estimator file",periodNames[ip]));
		return;               
	      }
	    }
	    task->SetMultiplVsZProfileLHC13b(multEstimatorAvg[0]);
	    task->SetMultiplVsZProfileLHC13c(multEstimatorAvg[1]);
	    
	  } else {    //load multiplicity estimators for pp
	    const Char_t* periodNames[4] = {"LHC10b", "LHC10c", "LHC10d", "LHC10e"};
	    TProfile* multEstimatorAvg[4];                       
	    
	    for(Int_t ip=0; ip<4; ip++) {
	      multEstimatorAvg[ip] = (TProfile*)(fileEstimator->Get(Form("SPDmult10_%s",periodNames[ip]))->Clone(Form("SPDmult10_%s_clone",periodNames[ip])));  
	      if (!multEstimatorAvg[ip]) {
		AliFatal(Form("Multiplicity estimator for %s not found! Please check your estimator file",periodNames[ip]));
		return;               
	      }  
	    }
	    task->SetMultiplVsZProfileLHC10b(multEstimatorAvg[0]);
	    task->SetMultiplVsZProfileLHC10c(multEstimatorAvg[1]);
	    task->SetMultiplVsZProfileLHC10d(multEstimatorAvg[2]);
	    task->SetMultiplVsZProfileLHC10e(multEstimatorAvg[3]);
	  }
	}
	Printf("***************** CONTAINER SETTINGS *****************");       
        Printf("decay channel = %d",(Int_t)task->GetDecayChannel());
        Printf("FillFromGenerated = %d",(Int_t)task->GetFillFromGenerated());
        Printf("Dselection = %d",(Int_t)task->GetDselection());
        Printf("UseWeight = %d",(Int_t)task->GetUseWeight());
        if (task->GetUseWeight()) {
          if(funcWeight) Printf("User-defined Weight function");
          else Printf("FONLL will be used for the weights");
        }

        Printf("Use Nch weight = %d",(Int_t)task->GetUseNchWeight());
        Printf("Sign = %d",(Int_t)task->GetSign());
        Printf("Centrality selection = %d",(Int_t)task->GetCentralitySelection());
        Printf("Fake selection = %d",(Int_t)task->GetFakeSelection());
        Printf("RejectCandidateIfNotFromQuark selection = %d",(Int_t)task->GetRejectCandidateIfNotFromQuark());
        Printf("UseMCVertex selection = %d",(Int_t)task->GetUseMCVertex());
        Printf("***************END CONTAINER SETTINGS *****************\n");


        //-----------------------------------------------------------//
        //   create correlation matrix for unfolding - only eta-pt   //
        //-----------------------------------------------------------//

        Bool_t AcceptanceUnf = kTRUE; // unfold at acceptance level, otherwise PPR

        Int_t thnDim[4];
        
        //first half  : reconstructed 
        //second half : MC

        thnDim[0] = iBin[0];
        thnDim[2] = iBin[0];
        thnDim[1] = iBin[1];
        thnDim[3] = iBin[1];

	TString nameCorr="";
	if(!isKeepDfromB) {
		nameCorr="CFHFcorr0";
	}
	else  if(isKeepDfromBOnly){
		nameCorr= "CFHFcorr0KeepDfromBOnly";
	}
	else  {
		nameCorr="CFHFcorr0allD";

	}
	nameCorr += suffix;

        THnSparseD* correlation = new THnSparseD(nameCorr,"THnSparse with correlations",4,thnDim);
        Double_t** binEdges = new Double_t[2];

        // set bin limits

        binEdges[0]= binLimpT;
        binEdges[1]= binLimy;

        correlation->SetBinEdges(0,binEdges[0]);
        correlation->SetBinEdges(2,binEdges[0]);

        correlation->SetBinEdges(1,binEdges[1]);
        correlation->SetBinEdges(3,binEdges[1]);

        correlation->Sumw2();
  
        // correlation matrix ready
        //------------------------------------------------//

        task->SetCorrelationMatrix(correlation); // correlation matrix for unfolding
	
	// Create and connect containers for input/output
	
	// ------ input data ------
	AliAnalysisDataContainer *cinput0  = mgr->GetCommonInputContainer();
	
	// ----- output data -----
	
	TString outputfile = AliAnalysisManager::GetCommonFileName();
	TString output1name="", output2name="", output3name="",output4name="", output5name="";
	output2name=nameContainer;
	output3name=nameCorr;
	output4name= "Cuts";
	output5name= "coutProfDst";
	if(!isKeepDfromB) {
		outputfile += ":PWG3_D2H_CFtaskDstartoKpipi";
		output1name="CFHFchist0";
		output3name+="_cOnly";
		output4name+="_cOnly";
		output5name+="_cOnly";
	}
	else  if(isKeepDfromBOnly){
		outputfile += ":PWG3_D2H_CFtaskDstartoKpiKeepDfromBOnly";
		output1name="CFHFchist0DfromB";
		output3name+="_bOnly";
		output4name+="_bOnly";
		output5name+="_bOnly";
	}
	else{
		outputfile += ":PWG3_D2H_CFtaskDstartoKpiKeepDfromB";
		output1name="CFHFchist0allD";
		output3name+="_all";
		output4name+="_all";
		output5name+="_all";
	}

	outputfile += suffix;
	output1name += suffix;
	output4name += suffix;
	output5name += suffix;

	//now comes user's output objects :
	// output TH1I for event counting
	AliAnalysisDataContainer *coutput1 = mgr->CreateContainer(output1name, TH1I::Class(),AliAnalysisManager::kOutputContainer,outputfile.Data());
	// output Correction Framework Container (for acceptance & efficiency calculations)
	AliAnalysisDataContainer *coutput2 = mgr->CreateContainer(output2name, AliCFContainer::Class(),AliAnalysisManager::kOutputContainer,outputfile.Data());
	// Unfolding - correlation matrix
        AliAnalysisDataContainer *coutput3 = mgr->CreateContainer(output3name, THnSparseD::Class(),AliAnalysisManager::kOutputContainer,outputfile.Data());
	// cuts
	AliAnalysisDataContainer *coutput4 = mgr->CreateContainer(output4name, AliRDHFCuts::Class(),AliAnalysisManager::kOutputContainer, outputfile.Data());
	// estimators list
	AliAnalysisDataContainer *coutput5 = mgr->CreateContainer(output5name, TList::Class(),AliAnalysisManager::kOutputContainer, outputfile.Data());

	mgr->AddTask(task);
	
	mgr->ConnectInput(task,0,mgr->GetCommonInputContainer());
	mgr->ConnectOutput(task,1,coutput1);
	mgr->ConnectOutput(task,2,coutput2);
        mgr->ConnectOutput(task,3,coutput3);
	mgr->ConnectOutput(task,4,coutput4);
	mgr->ConnectOutput(task,5,coutput5);
	return task;
	
}