/////////////////////////////////////////////////////////////////////////////////////////////
//
// AddTask* macro for flow analysis
// Creates a Flow Event task and adds it to the analysis manager.
// Sets the cuts using the correction framework (CORRFW) classes.
// Also creates Flow Analysis tasks and connects them to the output of the flow event task.
//
/////////////////////////////////////////////////////////////////////////////////////////////

void AddTaskFlowCentralityKinkQa( Float_t centrMin=0.,
                                  Float_t centrMax=100.,
                                  TString fileNameBase="output",
                                  AliPID::EParticleType particleType=AliPID::kUnknown,
                                  AliFlowTrackCuts::PIDsource sourcePID = AliFlowTrackCuts::kTOFpid,
                                  Int_t charge=0,
                                  Int_t harmonic=2,
                                  Bool_t doQA=kFALSE,
                                  TString uniqueStr=""
                                )
{
  // Define the range for eta subevents (for SP method)
  Double_t minA = -0.9;
  Double_t maxA = -0.4;
  Double_t minB = 0.4;
  Double_t maxB = 0.9;
  TString totalQvectorSP="Qa"; //["Qa"|"Qb"|"QaQb"]
  Double_t poiMinEta=0.4;
  Double_t poiMaxEta=0.9;


  // AFTERBURNER
  Bool_t useAfterBurner=kFALSE;
  Double_t v1=0.0;
  Double_t v2=0.0;
  Double_t v3=0.0;
  Double_t v4=0.0;
  Int_t numberOfTrackClones=0; //non-flow

  // Define a range of the detector to exclude
  Bool_t ExcludeRegion = kFALSE;
  Double_t excludeEtaMin = -0.;
  Double_t excludeEtaMax = 0.;
  Double_t excludePhiMin = 0.;
  Double_t excludePhiMax = 0.;

  // use physics selection class
  Bool_t  UsePhysicsSelection = kTRUE;

  // QA
  Bool_t runQAtask=kFALSE;
  Bool_t FillQAntuple=kFALSE;
  Bool_t DoQAcorrelations=kFALSE;

  // RUN SETTINGS
  // Flow analysis method can be:(set to kTRUE or kFALSE)
  Bool_t SP       = kTRUE;  // scalar product method (similar to eventplane method)
  Bool_t QC       = kTRUE;  // cumulants using Q vectors
  
  //these are OBSOLETE, use at own peril
  Bool_t GFC      = kFALSE;  // cumulants based on generating function
  Bool_t MCEP     = kFALSE;  // correlation with Monte Carlo reaction plane
  Bool_t FQD      = kFALSE;  // fit of the distribution of the Q vector (only integrated v)
  Bool_t LYZ1SUM  = kFALSE;  // Lee Yang Zeroes using sum generating function (integrated v)
  Bool_t LYZ1PROD = kFALSE;  // Lee Yang Zeroes using product generating function (integrated v)
  Bool_t LYZ2SUM  = kFALSE; // Lee Yang Zeroes using sum generating function (second pass differential v)
  Bool_t LYZ2PROD = kFALSE; // Lee Yang Zeroes using product generating function (second pass differential v)
  Bool_t LYZEP    = kFALSE; // Lee Yang Zeroes Event plane using sum generating function (gives eventplane + weight)
  Bool_t MH       = kFALSE;  // azimuthal correlators in mixed harmonics  
  Bool_t NL       = kFALSE;  // nested loops (for instance distribution of phi1-phi2 for all distinct pairs)

  //Bool_t METHODS[] = {SP,LYZ1SUM,LYZ1PROD,LYZ2SUM,LYZ2PROD,LYZEP,GFC,QC,FQD,MCEP,MH,NL};
  Bool_t METHODS[] = {SP};

  // Boolean to use/not use weights for the Q vector
  Bool_t WEIGHTS[] = {kFALSE,kFALSE,kFALSE}; //Phi, v'(pt), v'(eta)

  // SETTING THE CUTS

  //---------Data selection----------
  //kMC, kGlobal, kESD_TPConly, kESD_SPDtracklet
  AliFlowTrackCuts::trackParameterType rptype = AliFlowTrackCuts::kGlobal;
  AliFlowTrackCuts::trackParameterType poitype = AliFlowTrackCuts::kKink;

  //---------Parameter mixing--------
  //kPure - no mixing, kTrackWithMCkine, kTrackWithMCPID, kTrackWithMCpt
  AliFlowTrackCuts::trackParameterMix rpmix = AliFlowTrackCuts::kPure;
  AliFlowTrackCuts::trackParameterMix poimix = AliFlowTrackCuts::kPure;


  const char* rptypestr = AliFlowTrackCuts::GetParamTypeName(rptype);
  const char* poitypestr = AliFlowTrackCuts::GetParamTypeName(poitype);

  //===========================================================================
  // EVENTS CUTS:
  AliFlowEventCuts* cutsEvent = new AliFlowEventCuts("event cuts");
  cutsEvent->SetCentralityPercentileRange(centrMin,centrMax);
  cutsEvent->SetCentralityPercentileMethod(AliFlowEventCuts::kV0);
  cutsEvent->SetRefMultMethod(AliFlowEventCuts::kV0);
  //cutsEvent->SetCentralityPercentileMethod(AliFlowEventCuts::kSPD1tracklets);
  cutsEvent->SetNContributorsRange(2);
  cutsEvent->SetPrimaryVertexZrange(-7.,7.);
  cutsEvent->SetQA(doQA);
  
  // RP TRACK CUTS:
  AliFlowTrackCuts* cutsRP = new AliFlowTrackCuts("TPConlyRP");
  cutsRP->SetParamType(rptype);
  cutsRP->SetParamMix(rpmix);
  cutsRP->SetPtRange(0.2,5.);
  cutsRP->SetEtaRange(-0.8,0.8);
  cutsRP->SetMinNClustersTPC(70);
  cutsRP->SetMinChi2PerClusterTPC(0.1);
  cutsRP->SetMaxChi2PerClusterTPC(4.0);
  cutsRP->SetMaxDCAToVertexXY(3.0);
  cutsRP->SetMaxDCAToVertexZ(3.0);
  cutsRP->SetAcceptKinkDaughters(kFALSE);
  cutsRP->SetMinimalTPCdedx(10.);
  cutsRP->SetQA(doQA);

  // POI TRACK CUTS:
  AliFlowTrackCuts* cutsPOI = new AliFlowTrackCuts("GlobalPOI");
  cutsPOI->SetParamType(poitype);
  cutsPOI->SetParamMix(poimix);
  cutsPOI->SetPtRange(0.0,10.);
  cutsPOI->SetEtaRange(poiMinEta,poiMaxEta);
  //cutsPOI->SetRequireCharge(kTRUE);
  //cutsPOI->SetPID(PdgRP);
  cutsPOI->SetMinNClustersTPC(30);
  cutsPOI->SetMinChi2PerClusterTPC(0.1);
  cutsPOI->SetMaxChi2PerClusterTPC(4.0);
  //cutsPOI->SetRequireITSRefit(kTRUE);
  cutsPOI->SetRequireTPCRefit(kTRUE);
  cutsPOI->SetMinNClustersITS(2);
  //cutsPOI->SetMaxChi2PerClusterITS(1.e+09);
  cutsPOI->SetMaxDCAToVertexXY(3.);
  cutsPOI->SetMaxDCAToVertexZ(3.);
  //cutsPOI->SetDCAToVertex2D(kTRUE);
  //cutsPOI->SetMaxNsigmaToVertex(1.e+10);
  //cutsPOI->SetRequireSigmaToVertex(kFALSE);
  cutsPOI->SetAcceptKinkDaughters(kTRUE);
  cutsPOI->SetPID(particleType, sourcePID);
  if (charge!=0) cutsPOI->SetCharge(charge);
  //cutsPOI->SetAllowTOFmismatch(kFALSE);
  cutsPOI->SetRequireStrictTOFTPCagreement(kTRUE);
  //iexample: francesco's tunig TPC Bethe Bloch for data:
  //cutsPOI->GetESDpid().GetTPCResponse().SetBetheBlochParameters(4.36414e-02,1.75977e+01,1.14385e-08,2.27907e+00,3.36699e+00);
  //cutsPOI->GetESDpid().GetTPCResponse().SetMip(49);
  cutsPOI->SetMinimalTPCdedx(10.);
  cutsPOI->SetQA(doQA);

  TString outputSlotName("");
  outputSlotName+=uniqueStr;
  outputSlotName+=" ";
  outputSlotName+=totalQvectorSP;
  outputSlotName+=" ";
  outputSlotName+=Form("V%i ",harmonic);
  outputSlotName+=cutsRP->GetName();
  outputSlotName+=" ";
  outputSlotName+=cutsPOI->GetName();
  outputSlotName+=Form(" %.0f-",centrMin);
  outputSlotName+=Form("%.0f ",centrMax);
  outputSlotName+=Form("POI:%s ", AliFlowTrackCuts::GetParamTypeName(cutsPOI->GetParamType()) );
  outputSlotName+=Form("RP:%s ", AliFlowTrackCuts::GetParamTypeName(cutsRP->GetParamType()) );
  if (particleType!=AliPID::kUnknown)
  {
    outputSlotName+=AliFlowTrackCuts::PIDsourceName(sourcePID);
    outputSlotName+=" ";
    outputSlotName+=AliPID::ParticleName(particleType);
  }
  if (charge<0) outputSlotName+="-";
  if (charge>0) outputSlotName+="+";

  TString fileName(fileNameBase);
  fileName.Append(".root");

  Bool_t useWeights  = WEIGHTS[0] || WEIGHTS[1] || WEIGHTS[2];
  if (useWeights) cout<<"Weights are used"<<endl;
  else cout<<"Weights are not used"<<endl;
  
  // Get the pointer to the existing analysis manager via the static access method.
  //==============================================================================
  AliAnalysisManager *mgr = AliAnalysisManager::GetAnalysisManager();
  if (!mgr) {
    Error("AddTaskFlowEvent", "No analysis manager to connect to.");
    return NULL;
  }
  
  // Check the analysis type using the event handlers connected to the analysis
  // manager. The availability of MC handler can also be checked here.
  //==============================================================================
  if (!mgr->GetInputEventHandler()) {
    ::Error("AddTaskFlowEvent", "This task requires an input event handler");
    return NULL;
  }  

  // Open external input files
  //===========================================================================
  //weights: 
  TFile *weightsFile = NULL;
  TList *weightsList = NULL;

  if(useWeights) {
    //open the file with the weights:
    weightsFile = TFile::Open("weights.root","READ");
    if(weightsFile) {
      //access the list which holds the histos with weigths:
      weightsList = (TList*)weightsFile->Get("weights");
    }
    else {
      cout<<" WARNING: the file <weights.root> with weights from the previous run was not available."<<endl;
      break;
    } 
  }
  
  //LYZ2
  if (LYZ2SUM || LYZ2PROD) {
    //read the outputfile of the first run
    TString outputFileName = "AnalysisResults1.root";
    TString pwd(gSystem->pwd());
    pwd+="/";
    pwd+=outputFileName.Data();
    TFile *outputFile = NULL;
    if(gSystem->AccessPathName(pwd.Data(),kFileExists)) {
      cout<<"WARNING: You do not have an output file:"<<endl;
      cout<<"         "<<pwd.Data()<<endl;
      exit(0);
    } else { outputFile = TFile::Open(pwd.Data(),"READ");}
    
    if (LYZ2SUM){  
      // read the output directory from LYZ1SUM 
      TString inputFileNameLYZ2SUM = "outputLYZ1SUManalysis" ;
      inputFileNameLYZ2SUM += rptypestr;
      cout<<"The input directory is "<<inputFileNameLYZ2SUM.Data()<<endl;
      TFile* fInputFileLYZ2SUM = (TFile*)outputFile->FindObjectAny(inputFileNameLYZ2SUM.Data());
      if(!fInputFileLYZ2SUM || fInputFileLYZ2SUM->IsZombie()) { 
	cerr << " ERROR: To run LYZ2SUM you need the output file from LYZ1SUM. This file is not there! Please run LYZ1SUM first." << endl ; 
	break;
      }
      else {
	TList* fInputListLYZ2SUM = (TList*)fInputFileLYZ2SUM->Get("LYZ1SUM");
	if (!fInputListLYZ2SUM) {cout<<"list is NULL pointer!"<<endl;}
      }
      cout<<"LYZ2SUM input file/list read..."<<endl;
    }

    if (LYZ2PROD){  
      // read the output directory from LYZ1PROD 
      TString inputFileNameLYZ2PROD = "outputLYZ1PRODanalysis" ;
      inputFileNameLYZ2PROD += rptypestr;
      cout<<"The input directory is "<<inputFileNameLYZ2PROD.Data()<<endl;
      TFile* fInputFileLYZ2PROD = (TFile*)outputFile->FindObjectAny(inputFileNameLYZ2PROD.Data());
      if(!fInputFileLYZ2PROD || fInputFileLYZ2PROD->IsZombie()) { 
	cerr << " ERROR: To run LYZ2PROD you need the output file from LYZ1PROD. This file is not there! Please run LYZ1PROD first." << endl ; 
	break;
      }
      else {
	TList* fInputListLYZ2PROD = (TList*)fInputFileLYZ2PROD->Get("LYZ1PROD");
	if (!fInputListLYZ2PROD) {cout<<"list is NULL pointer!"<<endl;}
      }
      cout<<"LYZ2PROD input file/list read..."<<endl;
    }
  }

  if (LYZEP) {
    //read the outputfile of the second run
    TString outputFileName = "AnalysisResults2.root";
    TString pwd(gSystem->pwd());
    pwd+="/";
    pwd+=outputFileName.Data();
    TFile *outputFile = NULL;
    if(gSystem->AccessPathName(pwd.Data(),kFileExists)) {
      cout<<"WARNING: You do not have an output file:"<<endl;
      cout<<"         "<<pwd.Data()<<endl;
      exit(0);
    } else {
      outputFile = TFile::Open(pwd.Data(),"READ");
    }
    
    // read the output file from LYZ2SUM
    TString inputFileNameLYZEP = "outputLYZ2SUManalysis" ;
    inputFileNameLYZEP += rptypestr;
    cout<<"The input file is "<<inputFileNameLYZEP.Data()<<endl;
    TFile* fInputFileLYZEP = (TFile*)outputFile->FindObjectAny(inputFileNameLYZEP.Data());
    if(!fInputFileLYZEP || fInputFileLYZEP->IsZombie()) { 
      cerr << " ERROR: To run LYZEP you need the output file from LYZ2SUM. This file is not there! Please run LYZ2SUM first." << endl ; 
      break;
    }
    else {
      TList* fInputListLYZEP = (TList*)fInputFileLYZEP->Get("LYZ2SUM");
      if (!fInputListLYZEP) {cout<<"list is NULL pointer!"<<endl;}
    }
    cout<<"LYZEP input file/list read..."<<endl;
  }
  
  
  // Create the FMD task and add it to the manager
  //===========================================================================
  if (rptypestr == "FMD") {
    AliFMDAnalysisTaskSE *taskfmd = NULL;
    if (rptypestr == "FMD") {
      taskfmd = new AliFMDAnalysisTaskSE("TaskFMD");
      mgr->AddTask(taskfmd);
      
      AliFMDAnaParameters* pars = AliFMDAnaParameters::Instance();
      pars->Init();
      pars->SetProcessPrimary(kTRUE); //for MC only
      pars->SetProcessHits(kFALSE);
      
      //pars->SetRealData(kTRUE); //for real data
      //pars->SetProcessPrimary(kFALSE); //for real data
    }
  }
  
  // Create the flow event task, add it to the manager.
  //===========================================================================
  AliAnalysisTaskFlowEvent *taskFE = NULL;

  if(useAfterBurner)
    { 
      taskFE = new AliAnalysisTaskFlowEvent(Form("TaskFlowEvent %s",outputSlotName.Data()),"",doQA,1);
      taskFE->SetFlow(v1,v2,v3,v4); 
      taskFE->SetNonFlowNumberOfTrackClones(numberOfTrackClones);
      taskFE->SetAfterburnerOn();
    }
  else {taskFE = new AliAnalysisTaskFlowEvent(Form("TaskFlowEvent %s",outputSlotName.Data()),"",doQA); }
  if (ExcludeRegion) {
    taskFE->DefineDeadZone(excludeEtaMin, excludeEtaMax, excludePhiMin, excludePhiMax); 
  }
  taskFE->SetSubeventEtaRange(minA, maxA, minB, maxB);
  if (UsePhysicsSelection) {
    taskFE->SelectCollisionCandidates(AliVEvent::kMB);
    cout<<"Using Physics Selection"<<endl;
  }
  mgr->AddTask(taskFE);
  
  // Pass cuts for RPs and POIs to the task:
  taskFE->SetCutsEvent(cutsEvent);
  taskFE->SetCutsRP(cutsRP);
  taskFE->SetCutsPOI(cutsPOI);
  if (cutsRP->GetParamType()==AliFlowTrackCuts::kV0)
  { 
    //TODO: since this is set in a static object all analyses in an analysis train
    //will be affected.
    taskFE->SetHistWeightvsPhiMin(0.);
    taskFE->SetHistWeightvsPhiMax(200.);
  }

  // Create the analysis tasks, add them to the manager.
  //===========================================================================
  if (SP){
    AliAnalysisTaskScalarProduct *taskSP = new AliAnalysisTaskScalarProduct(Form("TaskScalarProduct %s",outputSlotName.Data()),WEIGHTS[0]);
    taskSP->SetRelDiffMsub(1.0);
    taskSP->SetApplyCorrectionForNUA(kTRUE);
    taskSP->SetTotalQvector(totalQvectorSP.Data());
    mgr->AddTask(taskSP);
  }
  if (LYZ1SUM){
    AliAnalysisTaskLeeYangZeros *taskLYZ1SUM = new AliAnalysisTaskLeeYangZeros(Form("TaskLeeYangZerosSUM %s",outputSlotName.Data()),kTRUE);
    taskLYZ1SUM->SetFirstRunLYZ(kTRUE);
    taskLYZ1SUM->SetUseSumLYZ(kTRUE);
    mgr->AddTask(taskLYZ1SUM);
  }
  if (LYZ1PROD){
    AliAnalysisTaskLeeYangZeros *taskLYZ1PROD = new AliAnalysisTaskLeeYangZeros(Form("TaskLeeYangZerosPROD %s",outputSlotName.Data()),kTRUE);
    taskLYZ1PROD->SetFirstRunLYZ(kTRUE);
    taskLYZ1PROD->SetUseSumLYZ(kFALSE);
    mgr->AddTask(taskLYZ1PROD);
  }
  if (LYZ2SUM){
    AliAnalysisTaskLeeYangZeros *taskLYZ2SUM = new AliAnalysisTaskLeeYangZeros(Form("TaskLeeYangZerosSUM %s",outputSlotName.Data()),kFALSE);
    taskLYZ2SUM->SetFirstRunLYZ(kFALSE);
    taskLYZ2SUM->SetUseSumLYZ(kTRUE);
    mgr->AddTask(taskLYZ2SUM);
  }
  if (LYZ2PROD){
    AliAnalysisTaskLeeYangZeros *taskLYZ2PROD = new AliAnalysisTaskLeeYangZeros(Form("TaskLeeYangZerosPROD %s",outputSlotName.Data()),kFALSE);
    taskLYZ2PROD->SetFirstRunLYZ(kFALSE);
    taskLYZ2PROD->SetUseSumLYZ(kFALSE);
    mgr->AddTask(taskLYZ2PROD);
  }
  if (LYZEP){
    AliAnalysisTaskLYZEventPlane *taskLYZEP = new AliAnalysisTaskLYZEventPlane(Form("TaskLYZEventPlane %s",outputSlotName.Data()));
    mgr->AddTask(taskLYZEP);
  }
  if (GFC){
    AliAnalysisTaskCumulants *taskGFC = new AliAnalysisTaskCumulants(Form("TaskCumulants %s",outputSlotName.Data()),useWeights);
    taskGFC->SetUsePhiWeights(WEIGHTS[0]); 
    taskGFC->SetUsePtWeights(WEIGHTS[1]);
    taskGFC->SetUseEtaWeights(WEIGHTS[2]); 
    mgr->AddTask(taskGFC);
  }
  if (QC){
    AliAnalysisTaskQCumulants *taskQC = new AliAnalysisTaskQCumulants(Form("TaskQCumulants %s",outputSlotName.Data()),useWeights);
    taskQC->SetUsePhiWeights(WEIGHTS[0]); 
    taskQC->SetUsePtWeights(WEIGHTS[1]);
    taskQC->SetUseEtaWeights(WEIGHTS[2]); 
    taskQC->SetCalculateCumulantsVsM(kFALSE);
    taskQC->SetnBinsMult(10000);
    taskQC->SetMinMult(0.);
    taskQC->SetMaxMult(10000.);
    taskQC->SetHarmonic(harmonic);
    taskQC->SetApplyCorrectionForNUA(kFALSE);
    taskQC->SetFillMultipleControlHistograms(kFALSE);     
    mgr->AddTask(taskQC);
  }
  if (FQD){
    AliAnalysisTaskFittingQDistribution *taskFQD = new AliAnalysisTaskFittingQDistribution(Form("TaskFittingQDistribution %s",outputSlotName.Data()),kFALSE);
    taskFQD->SetUsePhiWeights(WEIGHTS[0]); 
    taskFQD->SetqMin(0.);
    taskFQD->SetqMax(1000.);
    taskFQD->SetqNbins(10000);
    mgr->AddTask(taskFQD);
  }
  if (MCEP){
    AliAnalysisTaskMCEventPlane *taskMCEP = new AliAnalysisTaskMCEventPlane(Form("TaskMCEventPlane %s",outputSlotName.Data()));
    mgr->AddTask(taskMCEP);
  }
  if (MH){
    AliAnalysisTaskMixedHarmonics *taskMH = new AliAnalysisTaskMixedHarmonics(Form("TaskMixedHarmonics %s",outputSlotName.Data()),useWeights);
    taskMH->SetHarmonic(1); // n in cos[n(phi1+phi2-2phi3)] and cos[n(psi1+psi2-2phi3)]
    taskMH->SetNoOfMultipicityBins(10000);
    taskMH->SetMultipicityBinWidth(1.);
    taskMH->SetMinMultiplicity(1.);
    taskMH->SetCorrectForDetectorEffects(kTRUE);
    taskMH->SetEvaluateDifferential3pCorrelator(kFALSE); // evaluate <<cos[n(psi1+psi2-2phi3)]>> (Remark: two nested loops)    
    taskMH->SetOppositeChargesPOI(kFALSE); // POIs psi1 and psi2 in cos[n(psi1+psi2-2phi3)] will have opposite charges  
    mgr->AddTask(taskMH);
  }  
  if (NL){
    AliAnalysisTaskNestedLoops *taskNL = new AliAnalysisTaskNestedLoops(Form("TaskNestedLoops %s",outputSlotName.Data()),useWeights);
    taskNL->SetHarmonic(1); // n in cos[n(phi1+phi2-2phi3)] and cos[n(psi1+psi2-2phi3)]
    taskNL->SetEvaluateNestedLoopsForRAD(kTRUE); // RAD = Relative Angle Distribution
    taskNL->SetEvaluateNestedLoopsForMH(kTRUE); // evalaute <<cos[n(phi1+phi2-2phi3)]>> (Remark: three nested loops)   
    taskNL->SetEvaluateDifferential3pCorrelator(kFALSE); // evaluate <<cos[n(psi1+psi2-2phi3)]>>  (Remark: three nested loops)   
    taskNL->SetOppositeChargesPOI(kFALSE); // POIs psi1 and psi2 in cos[n(psi1+psi2-2phi3)] will have opposite charges  
    mgr->AddTask(taskNL);
  }

  // Create the output container for the data produced by the task
  // Connect to the input and output containers
  //===========================================================================
  AliAnalysisDataContainer *cinput1 = mgr->GetCommonInputContainer();
  
  if (rptypestr == "FMD") {
    AliAnalysisDataContainer *coutputFMD = 
      mgr->CreateContainer(Form("BackgroundCorrected %s",outputSlotName.Data()), TList::Class(), AliAnalysisManager::kExchangeContainer);
    //input and output taskFMD     
    mgr->ConnectInput(taskfmd, 0, cinput1);
    mgr->ConnectOutput(taskfmd, 1, coutputFMD);
    //input into taskFE
    mgr->ConnectInput(taskFE,1,coutputFMD);
  }
  
  AliAnalysisDataContainer *coutputFE = 
  mgr->CreateContainer(Form("FlowEventSimple %s",outputSlotName.Data()),AliFlowEventSimple::Class(),AliAnalysisManager::kExchangeContainer);
  mgr->ConnectInput(taskFE,0,cinput1); 
  mgr->ConnectOutput(taskFE,1,coutputFE);
 
  if (taskFE->GetQAOn())
  {
    TString outputQA = fileName;
    outputQA += ":QA";
    AliAnalysisDataContainer* coutputFEQA = 
    mgr->CreateContainer(Form("QA %s",outputSlotName.Data()), TList::Class(),AliAnalysisManager::kOutputContainer,outputQA);
    mgr->ConnectOutput(taskFE,2,coutputFEQA);
  }

  // Create the output containers for the data produced by the analysis tasks
  // Connect to the input and output containers
  //===========================================================================
  if (useWeights) {    
    AliAnalysisDataContainer *cinputWeights = mgr->CreateContainer(Form("Weights %s",outputSlotName.Data()),
								   TList::Class(),AliAnalysisManager::kInputContainer); 
  }

  if(SP) {
    TString outputSP = fileName;
    outputSP += ":outputSPanalysis";
    outputSP+= rptypestr;
    AliAnalysisDataContainer *coutputSP = mgr->CreateContainer(Form("SP %s",outputSlotName.Data()), 
							       TList::Class(),AliAnalysisManager::kOutputContainer,outputSP); 
    mgr->ConnectInput(taskSP,0,coutputFE); 
    mgr->ConnectOutput(taskSP,1,coutputSP); 
    if (WEIGHTS[0]) {
      mgr->ConnectInput(taskSP,1,cinputWeights);
      cinputWeights->SetData(weightsList);
    }
  }
  if(LYZ1SUM) {
    TString outputLYZ1SUM = fileName;
    outputLYZ1SUM += ":outputLYZ1SUManalysis";
    outputLYZ1SUM+= rptypestr;
    AliAnalysisDataContainer *coutputLYZ1SUM = mgr->CreateContainer(Form("LYZ1SUM %s",outputSlotName.Data()), 
								    TList::Class(),AliAnalysisManager::kOutputContainer,outputLYZ1SUM); 
    mgr->ConnectInput(taskLYZ1SUM,0,coutputFE);
    mgr->ConnectOutput(taskLYZ1SUM,1,coutputLYZ1SUM);
  }
  if(LYZ1PROD) {
    TString outputLYZ1PROD = fileName;
    outputLYZ1PROD += ":outputLYZ1PRODanalysis";
    outputLYZ1PROD+= rptypestr;
    AliAnalysisDataContainer *coutputLYZ1PROD = mgr->CreateContainer(Form("LYZ1PROD %s",outputSlotName.Data()), 
								     TList::Class(),AliAnalysisManager::kOutputContainer,outputLYZ1PROD); 
    mgr->ConnectInput(taskLYZ1PROD,0,coutputFE); 
    mgr->ConnectOutput(taskLYZ1PROD,1,coutputLYZ1PROD);
  }
  if(LYZ2SUM) {
    AliAnalysisDataContainer *cinputLYZ2SUM = mgr->CreateContainer(Form("LYZ2SUMin %s",outputSlotName.Data()),
								   TList::Class(),AliAnalysisManager::kInputContainer);
    TString outputLYZ2SUM = fileName;
    outputLYZ2SUM += ":outputLYZ2SUManalysis";
    outputLYZ2SUM+= rptypestr;
    
    AliAnalysisDataContainer *coutputLYZ2SUM = mgr->CreateContainer(Form("LYZ2SUM %s",outputSlotName.Data()), 
								    TList::Class(),AliAnalysisManager::kOutputContainer,outputLYZ2SUM); 
    mgr->ConnectInput(taskLYZ2SUM,0,coutputFE); 
    mgr->ConnectInput(taskLYZ2SUM,1,cinputLYZ2SUM);
    mgr->ConnectOutput(taskLYZ2SUM,1,coutputLYZ2SUM); 
    cinputLYZ2SUM->SetData(fInputListLYZ2SUM);
  }
  if(LYZ2PROD) {
    AliAnalysisDataContainer *cinputLYZ2PROD = mgr->CreateContainer(Form("LYZ2PRODin %s",outputSlotName.Data()),
								    TList::Class(),AliAnalysisManager::kInputContainer);
    TString outputLYZ2PROD = fileName;
    outputLYZ2PROD += ":outputLYZ2PRODanalysis";
    outputLYZ2PROD+= rptypestr;
    
    AliAnalysisDataContainer *coutputLYZ2PROD = mgr->CreateContainer(Form("LYZ2PROD %s",outputSlotName.Data()), 
								     TList::Class(),AliAnalysisManager::kOutputContainer,outputLYZ2PROD); 
    mgr->ConnectInput(taskLYZ2PROD,0,coutputFE); 
    mgr->ConnectInput(taskLYZ2PROD,1,cinputLYZ2PROD);
    mgr->ConnectOutput(taskLYZ2PROD,1,coutputLYZ2PROD); 
    cinputLYZ2PROD->SetData(fInputListLYZ2PROD);
  }
  if(LYZEP) {
    AliAnalysisDataContainer *cinputLYZEP = mgr->CreateContainer(Form("LYZEPin %s",outputSlotName.Data()),
								 TList::Class(),AliAnalysisManager::kInputContainer);
    TString outputLYZEP = fileName;
    outputLYZEP += ":outputLYZEPanalysis";
    outputLYZEP+= rptypestr;
    
    AliAnalysisDataContainer *coutputLYZEP = mgr->CreateContainer(Form("LYZEP %s",outputSlotName.Data()), 
								  TList::Class(),AliAnalysisManager::kOutputContainer,outputLYZEP); 
    mgr->ConnectInput(taskLYZEP,0,coutputFE); 
    mgr->ConnectInput(taskLYZEP,1,cinputLYZEP);
    mgr->ConnectOutput(taskLYZEP,1,coutputLYZEP); 
    cinputLYZEP->SetData(fInputListLYZEP);
  }
  if(GFC) {
    TString outputGFC = fileName;
    outputGFC += ":outputGFCanalysis";
    outputGFC+= rptypestr;
    
    AliAnalysisDataContainer *coutputGFC = mgr->CreateContainer(Form("GFC %s",outputSlotName.Data()), 
								TList::Class(),AliAnalysisManager::kOutputContainer,outputGFC); 
    mgr->ConnectInput(taskGFC,0,coutputFE); 
    mgr->ConnectOutput(taskGFC,1,coutputGFC);
    if (useWeights) {
      mgr->ConnectInput(taskGFC,1,cinputWeights);
      cinputWeights->SetData(weightsList);
    } 
  }
  if(QC) {
    TString outputQC = fileName;
    outputQC += ":outputQCanalysis";
    outputQC+= rptypestr;

    AliAnalysisDataContainer *coutputQC = mgr->CreateContainer(Form("QC %s",outputSlotName.Data()), 
							       TList::Class(),AliAnalysisManager::kOutputContainer,outputQC); 
    mgr->ConnectInput(taskQC,0,coutputFE); 
    mgr->ConnectOutput(taskQC,1,coutputQC);
    if (useWeights) {
      mgr->ConnectInput(taskQC,1,cinputWeights);
      cinputWeights->SetData(weightsList);
    }
  }
  if(FQD) {
    TString outputFQD = fileName;
    outputFQD += ":outputFQDanalysis";
    outputFQD+= rptypestr;
    
    AliAnalysisDataContainer *coutputFQD = mgr->CreateContainer(Form("FQD %s",outputSlotName.Data()), 
								TList::Class(),AliAnalysisManager::kOutputContainer,outputFQD); 
    mgr->ConnectInput(taskFQD,0,coutputFE); 
    mgr->ConnectOutput(taskFQD,1,coutputFQD);
    if(useWeights) {
      mgr->ConnectInput(taskFQD,1,cinputWeights);
      cinputWeights->SetData(weightsList);
    } 
  }
  if(MCEP) {
    TString outputMCEP = fileName;
    outputMCEP += ":outputMCEPanalysis";
    outputMCEP+= rptypestr;
    
    AliAnalysisDataContainer *coutputMCEP = mgr->CreateContainer(Form("MCEP %s",outputSlotName.Data()), 
								 TList::Class(),AliAnalysisManager::kOutputContainer,outputMCEP); 
    mgr->ConnectInput(taskMCEP,0,coutputFE);
    mgr->ConnectOutput(taskMCEP,1,coutputMCEP); 
  }
  if(MH) {
    TString outputMH = fileName;
    outputMH += ":outputMHanalysis";
    outputMH += rptypestr;
        
    AliAnalysisDataContainer *coutputMH = mgr->CreateContainer(Form("MH %s",outputSlotName.Data()), 
							       TList::Class(),AliAnalysisManager::kOutputContainer,outputMH); 
    mgr->ConnectInput(taskMH,0,coutputFE); 
    mgr->ConnectOutput(taskMH,1,coutputMH); 
    //if (useWeights) {
    //  mgr->ConnectInput(taskMH,1,cinputWeights);
    //  cinputWeights->SetData(weightsList);
    //} 
  }
  if(NL) {
    TString outputNL = fileName;
    outputNL += ":outputNLanalysis";
    outputNL += rptypestr;

    AliAnalysisDataContainer *coutputNL = mgr->CreateContainer(Form("NL %s",outputSlotName.Data()), 
							       TList::Class(),AliAnalysisManager::kOutputContainer,outputNL); 
    mgr->ConnectInput(taskNL,0,coutputFE);
    mgr->ConnectOutput(taskNL,1,coutputNL);
    //if (useWeights) {
    //  mgr->ConnectInput(taskNL,1,cinputWeights);
    //  cinputWeights->SetData(weightsList);
    //} 
  }

  ///////////////////////////////////////////////////////////////////////////////////////////
  if (runQAtask)
  {
    AliAnalysisTaskQAflow* taskQAflow = new AliAnalysisTaskQAflow(Form("TaskQAflow %s",outputSlotName.Data()));
    taskQAflow->SetEventCuts(cutsEvent);
    taskQAflow->SetTrackCuts(cutsRP);
    taskQAflow->SetFillNTuple(FillQAntuple);
    taskQAflow->SetDoCorrelations(DoQAcorrelations);
    mgr->AddTask(taskQAflow);
    
    Printf("outputSlotName %s",outputSlotName.Data());
    TString taskQAoutputFileName(fileNameBase);
    taskQAoutputFileName.Append("_QA.root");
    AliAnalysisDataContainer* coutputQAtask = mgr->CreateContainer(Form("flowQA %s",outputSlotName.Data()),
                                              TObjArray::Class(),
                                              AliAnalysisManager::kOutputContainer,
                                              taskQAoutputFileName);
    AliAnalysisDataContainer* coutputQAtaskTree = mgr->CreateContainer(Form("flowQAntuple %s",outputSlotName.Data()),
                                              TNtuple::Class(),
                                              AliAnalysisManager::kOutputContainer,
                                              taskQAoutputFileName);
    mgr->ConnectInput(taskQAflow,0,mgr->GetCommonInputContainer());
    mgr->ConnectInput(taskQAflow,1,coutputFE);
    mgr->ConnectOutput(taskQAflow,1,coutputQAtask);
    if (FillQAntuple) mgr->ConnectOutput(taskQAflow,2,coutputQAtaskTree);
  }
}