Sender: LSF System Subject: Job 47393: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Mar 13 15:36:31 2002 Results reported at Wed Mar 13 15:43:30 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v12_23 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.03.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 267.13 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Mar 13 15:36:36 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Mar 13 15:36:42 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_15/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v12_23/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_7/OSF1/bin:/sdss/ups/prd/sdssmath/v5_4/OSF1/bin:/sdss/ups/prd/astrotools/v5_6/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Wed Mar 13 15:36:42 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_6/OSF1 DERVISH_DIR=/sdss/ups/prd/dervish/v8_7/OSF1 DP_DIR=/sdss/ups/prd/dp/v12_23/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_15/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_7/OSF1/doc/www/dervish.home.html KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_4/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Wed Mar 13 15:36:42 CST 2002 Begin running plate --------------------------------------------------------------- Wed Mar 13 15:36:42 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e46c68 makePlates : beginning loop over plObs chain; makePlates : making 18 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0699.par makePlates : plateInfo struct for plate 927 : (h2).mjd 52613 (h2).raCen 116.0372 (h2).decCen 23.07514 (h2).haCen -26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.037 23.075 116.037 24.575 plMakePlateFromTile : mjd of obs : 52613.749699 Observed HA/dec of plate center, fiducial point (deg) : -26.002 23.072 -26.003 24.572 The rotation angle of the fid. point is 61.294713 plMakePlateFromTile : beginning loop over 1107 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0700.par makePlates : plateInfo struct for plate 928 : (h2).mjd 52613 (h2).raCen 118.3465 (h2).decCen 25.1709 (h2).haCen -28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.347 25.171 118.347 26.671 plMakePlateFromTile : mjd of obs : 52613.750555 Observed HA/dec of plate center, fiducial point (deg) : -28.002 25.167 -28.003 26.666 The rotation angle of the fid. point is 66.185820 plMakePlateFromTile : beginning loop over 1149 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0701.par makePlates : plateInfo struct for plate 929 : (h2).mjd 52613 (h2).raCen 120.3644 (h2).decCen 27.26706 (h2).haCen -30 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 120.364 27.267 120.364 28.767 plMakePlateFromTile : mjd of obs : 52613.750604 Observed HA/dec of plate center, fiducial point (deg) : -30.002 27.262 -30.003 28.761 The rotation angle of the fid. point is 70.648800 plMakePlateFromTile : beginning loop over 1244 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0702.par makePlates : plateInfo struct for plate 930 : (h2).mjd 52613 (h2).raCen 122.7747 (h2).decCen 28.9972 (h2).haCen -17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 122.775 28.997 122.775 30.497 plMakePlateFromTile : mjd of obs : 52613.793305 Observed HA/dec of plate center, fiducial point (deg) : -17.002 28.990 -17.003 30.489 The rotation angle of the fid. point is 71.170199 plMakePlateFromTile : beginning loop over 1207 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0703.par makePlates : plateInfo struct for plate 931 : (h2).mjd 52613 (h2).raCen 125.0878 (h2).decCen 30.8703 (h2).haCen -20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.088 30.870 125.088 32.370 plMakePlateFromTile : mjd of obs : 52613.791400 Observed HA/dec of plate center, fiducial point (deg) : -20.002 30.862 -20.003 32.361 The rotation angle of the fid. point is 78.328170 plMakePlateFromTile : beginning loop over 1227 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0704.par makePlates : plateInfo struct for plate 932 : (h2).mjd 52613 (h2).raCen 127.1673 (h2).decCen 32.40852 (h2).haCen -22 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.167 32.409 127.167 33.909 plMakePlateFromTile : mjd of obs : 52613.791619 Observed HA/dec of plate center, fiducial point (deg) : -22.002 32.399 -22.003 33.899 The rotation angle of the fid. point is 82.873984 plMakePlateFromTile : beginning loop over 1221 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0705.par makePlates : plateInfo struct for plate 933 : (h2).mjd 52613 (h2).raCen 129.489 (h2).decCen 33.97946 (h2).haCen -9 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.489 33.979 129.489 35.479 plMakePlateFromTile : mjd of obs : 52613.834074 Observed HA/dec of plate center, fiducial point (deg) : -9.002 33.969 -9.003 35.468 The rotation angle of the fid. point is 96.502195 plMakePlateFromTile : beginning loop over 1226 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0706.par makePlates : plateInfo struct for plate 934 : (h2).mjd 52613 (h2).raCen 131.7584 (h2).decCen 35.51105 (h2).haCen -11 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.758 35.511 131.758 37.011 plMakePlateFromTile : mjd of obs : 52613.834819 Observed HA/dec of plate center, fiducial point (deg) : -11.002 35.499 -11.003 36.999 The rotation angle of the fid. point is 103.496060 plMakePlateFromTile : beginning loop over 1244 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0707.par makePlates : plateInfo struct for plate 935 : (h2).mjd 52613 (h2).raCen 133.6346 (h2).decCen 36.6669 (h2).haCen -13 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.635 36.667 133.635 38.167 plMakePlateFromTile : mjd of obs : 52613.834474 Observed HA/dec of plate center, fiducial point (deg) : -13.002 36.654 -13.003 38.154 The rotation angle of the fid. point is 106.141540 plMakePlateFromTile : beginning loop over 1226 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0708.par makePlates : plateInfo struct for plate 936 : (h2).mjd 52613 (h2).raCen 135.4866 (h2).decCen 37.67623 (h2).haCen -15 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 135.487 37.676 135.487 39.176 plMakePlateFromTile : mjd of obs : 52613.834062 Observed HA/dec of plate center, fiducial point (deg) : -15.002 37.663 -15.003 39.162 The rotation angle of the fid. point is 107.270361 plMakePlateFromTile : beginning loop over 1230 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0709.par makePlates : plateInfo struct for plate 937 : (h2).mjd 52613 (h2).raCen 137.6137 (h2).decCen 38.9063 (h2).haCen -17 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.614 38.906 137.614 40.406 plMakePlateFromTile : mjd of obs : 52613.834411 Observed HA/dec of plate center, fiducial point (deg) : -17.002 38.892 -17.003 40.391 The rotation angle of the fid. point is 108.751137 plMakePlateFromTile : beginning loop over 1260 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0710.par makePlates : plateInfo struct for plate 938 : (h2).mjd 52613 (h2).raCen 139.7756 (h2).decCen 40.02512 (h2).haCen -19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.776 40.025 139.776 41.525 plMakePlateFromTile : mjd of obs : 52613.834857 Observed HA/dec of plate center, fiducial point (deg) : -19.002 40.010 -19.003 41.509 The rotation angle of the fid. point is 109.409599 plMakePlateFromTile : beginning loop over 1247 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0711.par makePlates : plateInfo struct for plate 939 : (h2).mjd 52613 (h2).raCen 141.9031 (h2).decCen 41.01173 (h2).haCen -21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.903 41.012 141.903 42.512 plMakePlateFromTile : mjd of obs : 52613.835207 Observed HA/dec of plate center, fiducial point (deg) : -21.002 40.996 -21.003 42.495 The rotation angle of the fid. point is 109.434813 plMakePlateFromTile : beginning loop over 1275 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0712.par makePlates : plateInfo struct for plate 940 : (h2).mjd 52613 (h2).raCen 144.6181 (h2).decCen 42.17777 (h2).haCen -24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.618 42.178 144.618 43.678 plMakePlateFromTile : mjd of obs : 52613.834413 Observed HA/dec of plate center, fiducial point (deg) : -24.002 42.161 -24.003 43.661 The rotation angle of the fid. point is 108.473893 plMakePlateFromTile : beginning loop over 1269 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0713.par makePlates : plateInfo struct for plate 941 : (h2).mjd 52613 (h2).raCen 147.0668 (h2).decCen 43.44652 (h2).haCen -27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.067 43.447 147.067 44.947 plMakePlateFromTile : mjd of obs : 52613.832881 Observed HA/dec of plate center, fiducial point (deg) : -27.002 43.429 -27.003 44.929 The rotation angle of the fid. point is 107.701389 plMakePlateFromTile : beginning loop over 1293 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0714.par makePlates : plateInfo struct for plate 942 : (h2).mjd 52613 (h2).raCen 149.6586 (h2).decCen 44.22624 (h2).haCen -29 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.659 44.226 149.659 45.726 plMakePlateFromTile : mjd of obs : 52613.834516 Observed HA/dec of plate center, fiducial point (deg) : -29.002 44.208 -29.002 45.708 The rotation angle of the fid. point is 107.004819 plMakePlateFromTile : beginning loop over 1263 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0715.par makePlates : plateInfo struct for plate 943 : (h2).mjd 52613 (h2).raCen 152.2798 (h2).decCen 45.12645 (h2).haCen -2 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.280 45.126 152.280 46.626 plMakePlateFromTile : mjd of obs : 52613.916599 Observed HA/dec of plate center, fiducial point (deg) : -2.002 45.107 -2.003 46.606 The rotation angle of the fid. point is 172.163422 plMakePlateFromTile : beginning loop over 1284 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk37/complete//plPlugMapT-0716.par makePlates : plateInfo struct for plate 944 : (h2).mjd 52613 (h2).raCen 154.6219 (h2).decCen 45.80803 (h2).haCen -4 (h2).theta 0 (h2).tempShop 0 (h2).tempObs -1.9 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.622 45.808 154.622 47.308 plMakePlateFromTile : mjd of obs : 52613.917543 Observed HA/dec of plate center, fiducial point (deg) : -4.002 45.788 -4.003 47.287 The rotation angle of the fid. point is 165.305635 plMakePlateFromTile : beginning loop over 1229 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Mar 13 15:38:09 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 18 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0927.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 2 16 2 0 6 3 16 36 4 17 64 5 33 102 6 32 95 7 27 76 8 28 69 9 33 90 10 26 72 11 10 28 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2961 0 4 11 42 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 44 201 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 39 177 plFiberPlate : adding spectro-photo std with objId = 2888 0 2 35 188 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 29 143 plFiberPlate : adding spectro-photo std with objId = 2888 0 2 31 87 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 34 144 plFiberPlate : adding spectro-photo std with objId = 2887 0 5 28 157 plFiberPlate : 80 possible sky positions to use as objects from a possible 345. plFiberPlate : 60 possible sky positions to use as objects from a possible 344. plFiberPlate : 51 possible sky positions to use as objects from a possible 343. plFiberPlate : 43 possible sky positions to use as objects from a possible 342. plFiberPlate : 36 possible sky positions to use as objects from a possible 341. plFiberPlate : 23 possible sky positions to use as objects from a possible 340. plFiberPlate : 20 possible sky positions to use as objects from a possible 339. plFiberPlate : 41 possible sky positions to use as objects from a possible 338. plFiberPlate : 36 possible sky positions to use as objects from a possible 337. plFiberPlate : 28 possible sky positions to use as objects from a possible 336. plFiberPlate : 27 possible sky positions to use as objects from a possible 335. plFiberPlate : 18 possible sky positions to use as objects from a possible 334. plFiberPlate : 8 possible sky positions to use as objects from a possible 333. plFiberPlate : 8 possible sky positions to use as objects from a possible 332. plFiberPlate : 10 possible sky positions to use as objects from a possible 331. plFiberPlate : 9 possible sky positions to use as objects from a possible 330. plFiberPlate : 45 possible sky positions to use as objects from a possible 329. plFiberPlate : 13 possible sky positions to use as objects from a possible 328. plFiberPlate : 8 possible sky positions to use as objects from a possible 327. plFiberPlate : 7 possible sky positions to use as objects from a possible 326. plFiberPlate : 8 possible sky positions to use as objects from a possible 325. plFiberPlate : 9 possible sky positions to use as objects from a possible 324. plFiberPlate : 18 possible sky positions to use as objects from a possible 323. plFiberPlate : 5 possible sky positions to use as objects from a possible 322. plFiberPlate : 5 possible sky positions to use as objects from a possible 321. plFiberPlate : 66 possible sky positions to use as objects from a possible 320. plFiberPlate : 14 possible sky positions to use as objects from a possible 319. plFiberPlate : 11 possible sky positions to use as objects from a possible 318. plFiberPlate : 8 possible sky positions to use as objects from a possible 317. plFiberPlate : 14 possible sky positions to use as objects from a possible 316. plFiberPlate : 6 possible sky positions to use as objects from a possible 315. plFiberPlate : 6 possible sky positions to use as objects from a possible 314. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0927.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0927.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0928.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 19 2 4 9 3 11 57 4 13 119 5 34 126 6 24 83 7 8 67 8 13 74 9 12 83 10 20 83 11 10 33 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 25 79 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 18 49 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 25 138 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 17 128 plFiberPlate : adding spectro-photo std with objId = 2888 0 2 56 107 plFiberPlate : adding spectro-photo std with objId = 2888 0 3 60 132 plFiberPlate : adding spectro-photo std with objId = 2888 0 2 67 177 plFiberPlate : adding spectro-photo std with objId = 2888 0 4 54 68 plFiberPlate : 100 possible sky positions to use as objects from a possible 413. plFiberPlate : 82 possible sky positions to use as objects from a possible 412. plFiberPlate : 60 possible sky positions to use as objects from a possible 411. plFiberPlate : 44 possible sky positions to use as objects from a possible 410. plFiberPlate : 29 possible sky positions to use as objects from a possible 409. plFiberPlate : 17 possible sky positions to use as objects from a possible 408. plFiberPlate : 21 possible sky positions to use as objects from a possible 407. plFiberPlate : 73 possible sky positions to use as objects from a possible 406. plFiberPlate : 46 possible sky positions to use as objects from a possible 405. plFiberPlate : 34 possible sky positions to use as objects from a possible 404. plFiberPlate : 16 possible sky positions to use as objects from a possible 403. plFiberPlate : 8 possible sky positions to use as objects from a possible 402. plFiberPlate : 6 possible sky positions to use as objects from a possible 401. plFiberPlate : 8 possible sky positions to use as objects from a possible 400. plFiberPlate : 5 possible sky positions to use as objects from a possible 399. plFiberPlate : 7 possible sky positions to use as objects from a possible 398. plFiberPlate : 55 possible sky positions to use as objects from a possible 397. plFiberPlate : 14 possible sky positions to use as objects from a possible 396. plFiberPlate : 9 possible sky positions to use as objects from a possible 395. plFiberPlate : 10 possible sky positions to use as objects from a possible 394. plFiberPlate : 3 possible sky positions to use as objects from a possible 393. plFiberPlate : 8 possible sky positions to use as objects from a possible 392. plFiberPlate : 14 possible sky positions to use as objects from a possible 391. plFiberPlate : 7 possible sky positions to use as objects from a possible 390. plFiberPlate : 7 possible sky positions to use as objects from a possible 389. plFiberPlate : 46 possible sky positions to use as objects from a possible 388. plFiberPlate : 6 possible sky positions to use as objects from a possible 387. plFiberPlate : 7 possible sky positions to use as objects from a possible 386. plFiberPlate : 8 possible sky positions to use as objects from a possible 385. plFiberPlate : 3 possible sky positions to use as objects from a possible 384. plFiberPlate : 9 possible sky positions to use as objects from a possible 383. plFiberPlate : 7 possible sky positions to use as objects from a possible 382. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0927.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0928.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0928.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0929.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 50 2 4 37 3 12 66 4 15 94 5 25 139 6 17 111 7 23 88 8 24 84 9 19 115 10 24 112 11 19 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 33 7 plFiberPlate : adding spectro-photo std with objId = 2888 0 3 70 101 plFiberPlate : adding spectro-photo std with objId = 2888 0 3 78 6 plFiberPlate : adding spectro-photo std with objId = 2888 0 4 71 141 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 38 103 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 45 56 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 38 22 plFiberPlate : adding spectro-photo std with objId = 2888 0 3 86 61 plFiberPlate : 96 possible sky positions to use as objects from a possible 493. plFiberPlate : 59 possible sky positions to use as objects from a possible 492. plFiberPlate : 51 possible sky positions to use as objects from a possible 491. plFiberPlate : 40 possible sky positions to use as objects from a possible 490. plFiberPlate : 25 possible sky positions to use as objects from a possible 489. plFiberPlate : 9 possible sky positions to use as objects from a possible 488. plFiberPlate : 38 possible sky positions to use as objects from a possible 487. plFiberPlate : 73 possible sky positions to use as objects from a possible 486. plFiberPlate : 54 possible sky positions to use as objects from a possible 485. plFiberPlate : 41 possible sky positions to use as objects from a possible 484. plFiberPlate : 28 possible sky positions to use as objects from a possible 483. plFiberPlate : 21 possible sky positions to use as objects from a possible 482. plFiberPlate : 14 possible sky positions to use as objects from a possible 481. plFiberPlate : 7 possible sky positions to use as objects from a possible 480. plFiberPlate : 21 possible sky positions to use as objects from a possible 479. plFiberPlate : 18 possible sky positions to use as objects from a possible 478. plFiberPlate : 31 possible sky positions to use as objects from a possible 477. plFiberPlate : 19 possible sky positions to use as objects from a possible 476. plFiberPlate : 16 possible sky positions to use as objects from a possible 475. plFiberPlate : 11 possible sky positions to use as objects from a possible 474. plFiberPlate : 8 possible sky positions to use as objects from a possible 473. plFiberPlate : 9 possible sky positions to use as objects from a possible 472. plFiberPlate : 10 possible sky positions to use as objects from a possible 471. plFiberPlate : 13 possible sky positions to use as objects from a possible 470. plFiberPlate : 9 possible sky positions to use as objects from a possible 469. plFiberPlate : 124 possible sky positions to use as objects from a possible 468. plFiberPlate : 14 possible sky positions to use as objects from a possible 467. plFiberPlate : 17 possible sky positions to use as objects from a possible 466. plFiberPlate : 16 possible sky positions to use as objects from a possible 465. plFiberPlate : 11 possible sky positions to use as objects from a possible 464. plFiberPlate : 18 possible sky positions to use as objects from a possible 463. plFiberPlate : 10 possible sky positions to use as objects from a possible 462. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0928.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0929.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0929.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0930.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 31 2 9 21 3 22 70 4 28 95 5 23 123 6 13 101 7 17 102 8 26 105 9 17 96 10 37 100 11 19 42 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2888 0 2 99 31 plFiberPlate : adding spectro-photo std with objId = 2888 0 4 91 53 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 65 68 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 63 46 plFiberPlate : adding spectro-photo std with objId = 2888 0 3 98 14 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 57 15 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 60 76 plFiberPlate : adding spectro-photo std with objId = 2888 0 3 86 61 plFiberPlate : 110 possible sky positions to use as objects from a possible 460. plFiberPlate : 70 possible sky positions to use as objects from a possible 459. plFiberPlate : 66 possible sky positions to use as objects from a possible 458. plFiberPlate : 42 possible sky positions to use as objects from a possible 457. plFiberPlate : 30 possible sky positions to use as objects from a possible 456. plFiberPlate : 5 possible sky positions to use as objects from a possible 455. plFiberPlate : 22 possible sky positions to use as objects from a possible 454. plFiberPlate : 45 possible sky positions to use as objects from a possible 453. plFiberPlate : 35 possible sky positions to use as objects from a possible 452. plFiberPlate : 26 possible sky positions to use as objects from a possible 451. plFiberPlate : 15 possible sky positions to use as objects from a possible 450. plFiberPlate : 7 possible sky positions to use as objects from a possible 449. plFiberPlate : 2 possible sky positions to use as objects from a possible 448. plFiberPlate : 4 possible sky positions to use as objects from a possible 447. plFiberPlate : 5 possible sky positions to use as objects from a possible 446. plFiberPlate : 8 possible sky positions to use as objects from a possible 445. plFiberPlate : 61 possible sky positions to use as objects from a possible 444. plFiberPlate : 28 possible sky positions to use as objects from a possible 443. plFiberPlate : 15 possible sky positions to use as objects from a possible 442. plFiberPlate : 6 possible sky positions to use as objects from a possible 441. plFiberPlate : 3 possible sky positions to use as objects from a possible 440. plFiberPlate : 8 possible sky positions to use as objects from a possible 439. plFiberPlate : 12 possible sky positions to use as objects from a possible 438. plFiberPlate : 8 possible sky positions to use as objects from a possible 437. plFiberPlate : 21 possible sky positions to use as objects from a possible 436. plFiberPlate : 64 possible sky positions to use as objects from a possible 435. plFiberPlate : 10 possible sky positions to use as objects from a possible 434. plFiberPlate : 12 possible sky positions to use as objects from a possible 433. plFiberPlate : 13 possible sky positions to use as objects from a possible 432. plFiberPlate : 19 possible sky positions to use as objects from a possible 431. plFiberPlate : 10 possible sky positions to use as objects from a possible 430. plFiberPlate : 15 possible sky positions to use as objects from a possible 429. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0929.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0930.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0930.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0931.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 44 2 8 34 3 18 65 4 22 93 5 15 142 6 7 118 7 15 78 8 16 99 9 11 121 10 27 106 11 18 60 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2888 0 4 117 56 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 85 51 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 97 35 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 71 144 plFiberPlate : adding spectro-photo std with objId = 2888 0 2 106 82 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 76 149 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 70 122 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 78 25 plFiberPlate : 99 possible sky positions to use as objects from a possible 496. plFiberPlate : 60 possible sky positions to use as objects from a possible 495. plFiberPlate : 56 possible sky positions to use as objects from a possible 494. plFiberPlate : 38 possible sky positions to use as objects from a possible 493. plFiberPlate : 28 possible sky positions to use as objects from a possible 492. plFiberPlate : 29 possible sky positions to use as objects from a possible 491. plFiberPlate : 16 possible sky positions to use as objects from a possible 490. plFiberPlate : 57 possible sky positions to use as objects from a possible 489. plFiberPlate : 35 possible sky positions to use as objects from a possible 488. plFiberPlate : 24 possible sky positions to use as objects from a possible 487. plFiberPlate : 19 possible sky positions to use as objects from a possible 486. plFiberPlate : 10 possible sky positions to use as objects from a possible 485. plFiberPlate : 10 possible sky positions to use as objects from a possible 484. plFiberPlate : 5 possible sky positions to use as objects from a possible 483. plFiberPlate : 13 possible sky positions to use as objects from a possible 482. plFiberPlate : 9 possible sky positions to use as objects from a possible 481. plFiberPlate : 62 possible sky positions to use as objects from a possible 480. plFiberPlate : 36 possible sky positions to use as objects from a possible 479. plFiberPlate : 26 possible sky positions to use as objects from a possible 478. plFiberPlate : 13 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : 9 possible sky positions to use as objects from a possible 475. plFiberPlate : 14 possible sky positions to use as objects from a possible 474. plFiberPlate : 5 possible sky positions to use as objects from a possible 473. plFiberPlate : 16 possible sky positions to use as objects from a possible 472. plFiberPlate : 49 possible sky positions to use as objects from a possible 471. plFiberPlate : 17 possible sky positions to use as objects from a possible 470. plFiberPlate : 11 possible sky positions to use as objects from a possible 469. plFiberPlate : 5 possible sky positions to use as objects from a possible 468. plFiberPlate : 6 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 27 possible sky positions to use as objects from a possible 465. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0930.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0931.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0931.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0932.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 53 2 10 36 3 12 75 4 13 104 5 16 124 6 14 99 7 8 84 8 13 115 9 7 100 10 19 126 11 15 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 93 45 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 100 51 plFiberPlate : adding spectro-photo std with objId = 2961 0 4 86 101 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 11 125 plFiberPlate : adding spectro-photo std with objId = 2888 0 3 120 58 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 85 51 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 26 37 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 96 90 plFiberPlate : 115 possible sky positions to use as objects from a possible 514. plFiberPlate : 88 possible sky positions to use as objects from a possible 513. plFiberPlate : 63 possible sky positions to use as objects from a possible 512. plFiberPlate : 48 possible sky positions to use as objects from a possible 511. plFiberPlate : 34 possible sky positions to use as objects from a possible 510. plFiberPlate : 24 possible sky positions to use as objects from a possible 509. plFiberPlate : 29 possible sky positions to use as objects from a possible 508. plFiberPlate : 58 possible sky positions to use as objects from a possible 507. plFiberPlate : 29 possible sky positions to use as objects from a possible 506. plFiberPlate : 27 possible sky positions to use as objects from a possible 505. plFiberPlate : 13 possible sky positions to use as objects from a possible 504. plFiberPlate : 11 possible sky positions to use as objects from a possible 503. plFiberPlate : 12 possible sky positions to use as objects from a possible 502. plFiberPlate : 7 possible sky positions to use as objects from a possible 501. plFiberPlate : 17 possible sky positions to use as objects from a possible 500. plFiberPlate : 11 possible sky positions to use as objects from a possible 499. plFiberPlate : 44 possible sky positions to use as objects from a possible 498. plFiberPlate : 26 possible sky positions to use as objects from a possible 497. plFiberPlate : 20 possible sky positions to use as objects from a possible 496. plFiberPlate : 7 possible sky positions to use as objects from a possible 495. plFiberPlate : 3 possible sky positions to use as objects from a possible 494. plFiberPlate : 6 possible sky positions to use as objects from a possible 493. plFiberPlate : 11 possible sky positions to use as objects from a possible 492. plFiberPlate : 13 possible sky positions to use as objects from a possible 491. plFiberPlate : 14 possible sky positions to use as objects from a possible 490. plFiberPlate : 82 possible sky positions to use as objects from a possible 489. plFiberPlate : 11 possible sky positions to use as objects from a possible 488. plFiberPlate : 7 possible sky positions to use as objects from a possible 487. plFiberPlate : 13 possible sky positions to use as objects from a possible 486. plFiberPlate : 5 possible sky positions to use as objects from a possible 485. plFiberPlate : 21 possible sky positions to use as objects from a possible 484. plFiberPlate : 24 possible sky positions to use as objects from a possible 483. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0931.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0932.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0932.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0933.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 49 2 5 35 3 11 88 4 9 120 5 16 136 6 16 102 7 10 94 8 13 97 9 9 96 10 17 128 11 8 65 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 144 26 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 115 54 plFiberPlate : adding spectro-photo std with objId = 2961 0 4 105 60 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 26 37 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 114 24 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 29 135 plFiberPlate : adding spectro-photo std with objId = 2961 0 2 112 63 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 39 116 plFiberPlate : 134 possible sky positions to use as objects from a possible 518. plFiberPlate : 76 possible sky positions to use as objects from a possible 517. plFiberPlate : 58 possible sky positions to use as objects from a possible 516. plFiberPlate : 36 possible sky positions to use as objects from a possible 515. plFiberPlate : 16 possible sky positions to use as objects from a possible 514. plFiberPlate : 17 possible sky positions to use as objects from a possible 513. plFiberPlate : 32 possible sky positions to use as objects from a possible 512. plFiberPlate : 75 possible sky positions to use as objects from a possible 511. plFiberPlate : 61 possible sky positions to use as objects from a possible 510. plFiberPlate : 41 possible sky positions to use as objects from a possible 509. plFiberPlate : 20 possible sky positions to use as objects from a possible 508. plFiberPlate : 9 possible sky positions to use as objects from a possible 507. plFiberPlate : 5 possible sky positions to use as objects from a possible 506. plFiberPlate : 14 possible sky positions to use as objects from a possible 505. plFiberPlate : 6 possible sky positions to use as objects from a possible 504. plFiberPlate : 12 possible sky positions to use as objects from a possible 503. plFiberPlate : 61 possible sky positions to use as objects from a possible 502. plFiberPlate : 27 possible sky positions to use as objects from a possible 501. plFiberPlate : 19 possible sky positions to use as objects from a possible 500. plFiberPlate : 13 possible sky positions to use as objects from a possible 499. plFiberPlate : 13 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 6 possible sky positions to use as objects from a possible 496. plFiberPlate : 15 possible sky positions to use as objects from a possible 495. plFiberPlate : 13 possible sky positions to use as objects from a possible 494. plFiberPlate : 71 possible sky positions to use as objects from a possible 493. plFiberPlate : 22 possible sky positions to use as objects from a possible 492. plFiberPlate : 14 possible sky positions to use as objects from a possible 491. plFiberPlate : 15 possible sky positions to use as objects from a possible 490. plFiberPlate : 11 possible sky positions to use as objects from a possible 489. plFiberPlate : 10 possible sky positions to use as objects from a possible 488. plFiberPlate : 16 possible sky positions to use as objects from a possible 487. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0932.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0933.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0933.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0934.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 62 2 8 35 3 17 82 4 17 119 5 12 127 6 9 118 7 0 96 8 5 114 9 6 117 10 20 128 11 15 67 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 7 at 121.000 263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 131 99 plFiberPlate : adding spectro-photo std with objId = 2961 0 3 117 61 plFiberPlate : adding spectro-photo std with objId = 2961 0 2 122 40 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 57 49 plFiberPlate : adding spectro-photo std with objId = 2961 0 2 130 48 plFiberPlate : adding spectro-photo std with objId = 2961 0 2 127 62 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 124 77 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 132 123 plFiberPlate : 124 possible sky positions to use as objects from a possible 550. plFiberPlate : 75 possible sky positions to use as objects from a possible 549. plFiberPlate : 48 possible sky positions to use as objects from a possible 548. plFiberPlate : 25 possible sky positions to use as objects from a possible 547. plFiberPlate : 24 possible sky positions to use as objects from a possible 546. plFiberPlate : 8 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 56 possible sky positions to use as objects from a possible 543. plFiberPlate : 33 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 4 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : 6 possible sky positions to use as objects from a possible 537. plFiberPlate : 11 possible sky positions to use as objects from a possible 536. plFiberPlate : 12 possible sky positions to use as objects from a possible 535. plFiberPlate : 59 possible sky positions to use as objects from a possible 534. plFiberPlate : 29 possible sky positions to use as objects from a possible 533. plFiberPlate : 27 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 3 possible sky positions to use as objects from a possible 530. plFiberPlate : 7 possible sky positions to use as objects from a possible 529. plFiberPlate : 16 possible sky positions to use as objects from a possible 528. plFiberPlate : 15 possible sky positions to use as objects from a possible 527. plFiberPlate : 25 possible sky positions to use as objects from a possible 526. plFiberPlate : 67 possible sky positions to use as objects from a possible 525. plFiberPlate : 45 possible sky positions to use as objects from a possible 524. plFiberPlate : 35 possible sky positions to use as objects from a possible 523. plFiberPlate : 9 possible sky positions to use as objects from a possible 522. plFiberPlate : 19 possible sky positions to use as objects from a possible 521. plFiberPlate : 8 possible sky positions to use as objects from a possible 520. plFiberPlate : 7 possible sky positions to use as objects from a possible 519. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0933.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0934.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0934.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0935.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 68 2 1 36 3 5 79 4 4 109 5 11 138 6 6 102 7 10 87 8 18 102 9 4 106 10 11 119 11 11 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2887 0 5 179 28 plFiberPlate : adding spectro-photo std with objId = 2961 0 2 130 48 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 180 55 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 57 49 plFiberPlate : adding spectro-photo std with objId = 2961 0 2 140 56 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 66 94 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 65 28 plFiberPlate : adding spectro-photo std with objId = 2961 0 5 132 123 plFiberPlate : 118 possible sky positions to use as objects from a possible 532. plFiberPlate : 88 possible sky positions to use as objects from a possible 531. plFiberPlate : 66 possible sky positions to use as objects from a possible 530. plFiberPlate : 19 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 16 possible sky positions to use as objects from a possible 527. plFiberPlate : 24 possible sky positions to use as objects from a possible 526. plFiberPlate : 68 possible sky positions to use as objects from a possible 525. plFiberPlate : 39 possible sky positions to use as objects from a possible 524. plFiberPlate : 28 possible sky positions to use as objects from a possible 523. plFiberPlate : 12 possible sky positions to use as objects from a possible 522. plFiberPlate : 6 possible sky positions to use as objects from a possible 521. plFiberPlate : 5 possible sky positions to use as objects from a possible 520. plFiberPlate : 8 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 34 possible sky positions to use as objects from a possible 517. plFiberPlate : 49 possible sky positions to use as objects from a possible 516. plFiberPlate : 34 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 11 possible sky positions to use as objects from a possible 513. plFiberPlate : 5 possible sky positions to use as objects from a possible 512. plFiberPlate : 8 possible sky positions to use as objects from a possible 511. plFiberPlate : 15 possible sky positions to use as objects from a possible 510. plFiberPlate : 14 possible sky positions to use as objects from a possible 509. plFiberPlate : 21 possible sky positions to use as objects from a possible 508. plFiberPlate : 58 possible sky positions to use as objects from a possible 507. plFiberPlate : 10 possible sky positions to use as objects from a possible 506. plFiberPlate : 8 possible sky positions to use as objects from a possible 505. plFiberPlate : 8 possible sky positions to use as objects from a possible 504. plFiberPlate : 8 possible sky positions to use as objects from a possible 503. plFiberPlate : 7 possible sky positions to use as objects from a possible 502. plFiberPlate : 8 possible sky positions to use as objects from a possible 501. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0934.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0935.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0935.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0936.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 67 2 6 38 3 16 88 4 14 114 5 12 129 6 8 89 7 9 86 8 13 110 9 4 100 10 23 132 11 8 63 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2887 0 5 183 32 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 177 33 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 78 2 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 67 15 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 77 90 plFiberPlate : adding spectro-photo std with objId = 2887 0 5 190 18 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 66 94 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 194 24 plFiberPlate : 109 possible sky positions to use as objects from a possible 528. plFiberPlate : 108 possible sky positions to use as objects from a possible 527. plFiberPlate : 76 possible sky positions to use as objects from a possible 526. plFiberPlate : 47 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 22 possible sky positions to use as objects from a possible 522. plFiberPlate : 60 possible sky positions to use as objects from a possible 521. plFiberPlate : 43 possible sky positions to use as objects from a possible 520. plFiberPlate : 20 possible sky positions to use as objects from a possible 519. plFiberPlate : 3 possible sky positions to use as objects from a possible 518. plFiberPlate : 5 possible sky positions to use as objects from a possible 517. plFiberPlate : 12 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 6 possible sky positions to use as objects from a possible 513. plFiberPlate : 62 possible sky positions to use as objects from a possible 512. plFiberPlate : 29 possible sky positions to use as objects from a possible 511. plFiberPlate : 30 possible sky positions to use as objects from a possible 510. plFiberPlate : 25 possible sky positions to use as objects from a possible 509. plFiberPlate : 8 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : 13 possible sky positions to use as objects from a possible 506. plFiberPlate : 22 possible sky positions to use as objects from a possible 505. plFiberPlate : 17 possible sky positions to use as objects from a possible 504. plFiberPlate : 20 possible sky positions to use as objects from a possible 503. plFiberPlate : 25 possible sky positions to use as objects from a possible 502. plFiberPlate : 3 possible sky positions to use as objects from a possible 501. plFiberPlate : 6 possible sky positions to use as objects from a possible 500. plFiberPlate : 6 possible sky positions to use as objects from a possible 499. plFiberPlate : 22 possible sky positions to use as objects from a possible 498. plFiberPlate : 23 possible sky positions to use as objects from a possible 497. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0935.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0936.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0936.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0937.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 67 2 9 43 3 13 77 4 15 117 5 20 135 6 16 112 7 12 98 8 19 94 9 13 103 10 21 135 11 14 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 190 33 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 90 9 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 203 16 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 87 25 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 86 57 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 94 24 plFiberPlate : adding spectro-photo std with objId = 2887 0 5 190 18 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 194 24 plFiberPlate : 119 possible sky positions to use as objects from a possible 553. plFiberPlate : 85 possible sky positions to use as objects from a possible 552. plFiberPlate : 50 possible sky positions to use as objects from a possible 551. plFiberPlate : 22 possible sky positions to use as objects from a possible 550. plFiberPlate : 13 possible sky positions to use as objects from a possible 549. plFiberPlate : 36 possible sky positions to use as objects from a possible 548. plFiberPlate : 15 possible sky positions to use as objects from a possible 547. plFiberPlate : 75 possible sky positions to use as objects from a possible 546. plFiberPlate : 42 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 6 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 8 possible sky positions to use as objects from a possible 541. plFiberPlate : 3 possible sky positions to use as objects from a possible 540. plFiberPlate : 9 possible sky positions to use as objects from a possible 539. plFiberPlate : 5 possible sky positions to use as objects from a possible 538. plFiberPlate : 62 possible sky positions to use as objects from a possible 537. plFiberPlate : 47 possible sky positions to use as objects from a possible 536. plFiberPlate : 31 possible sky positions to use as objects from a possible 535. plFiberPlate : 23 possible sky positions to use as objects from a possible 534. plFiberPlate : 9 possible sky positions to use as objects from a possible 533. plFiberPlate : 14 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 8 possible sky positions to use as objects from a possible 530. plFiberPlate : 9 possible sky positions to use as objects from a possible 529. plFiberPlate : 61 possible sky positions to use as objects from a possible 528. plFiberPlate : 23 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 13 possible sky positions to use as objects from a possible 524. plFiberPlate : 11 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0936.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0937.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0937.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0938.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 92 2 7 48 3 14 79 4 14 107 5 19 119 6 12 97 7 10 93 8 17 108 9 10 99 10 20 126 11 11 86 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 206 28 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 105 62 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 204 37 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 217 55 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 207 21 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 94 24 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 111 13 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 209 12 plFiberPlate : 135 possible sky positions to use as objects from a possible 546. plFiberPlate : 70 possible sky positions to use as objects from a possible 545. plFiberPlate : 40 possible sky positions to use as objects from a possible 544. plFiberPlate : 20 possible sky positions to use as objects from a possible 543. plFiberPlate : 9 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 55 possible sky positions to use as objects from a possible 540. plFiberPlate : 51 possible sky positions to use as objects from a possible 539. plFiberPlate : 36 possible sky positions to use as objects from a possible 538. plFiberPlate : 19 possible sky positions to use as objects from a possible 537. plFiberPlate : 5 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 4 possible sky positions to use as objects from a possible 534. plFiberPlate : 20 possible sky positions to use as objects from a possible 533. plFiberPlate : 21 possible sky positions to use as objects from a possible 532. plFiberPlate : 14 possible sky positions to use as objects from a possible 531. plFiberPlate : 47 possible sky positions to use as objects from a possible 530. plFiberPlate : 35 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 5 possible sky positions to use as objects from a possible 527. plFiberPlate : 4 possible sky positions to use as objects from a possible 526. plFiberPlate : 15 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 15 possible sky positions to use as objects from a possible 522. plFiberPlate : 54 possible sky positions to use as objects from a possible 521. plFiberPlate : 17 possible sky positions to use as objects from a possible 520. plFiberPlate : 12 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 18 possible sky positions to use as objects from a possible 517. plFiberPlate : 17 possible sky positions to use as objects from a possible 516. plFiberPlate : 19 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0937.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0938.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0938.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0939.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 90 2 13 67 3 12 95 4 17 117 5 22 122 6 20 94 7 10 85 8 10 111 9 13 92 10 27 159 11 17 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 114 10 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 220 35 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 113 46 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 217 55 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 223 42 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 117 51 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 111 13 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 119 11 plFiberPlate : 123 possible sky positions to use as objects from a possible 563. plFiberPlate : 99 possible sky positions to use as objects from a possible 562. plFiberPlate : 83 possible sky positions to use as objects from a possible 561. plFiberPlate : 45 possible sky positions to use as objects from a possible 560. plFiberPlate : 54 possible sky positions to use as objects from a possible 559. plFiberPlate : 30 possible sky positions to use as objects from a possible 558. plFiberPlate : 29 possible sky positions to use as objects from a possible 557. plFiberPlate : 63 possible sky positions to use as objects from a possible 556. plFiberPlate : 51 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 14 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 8 possible sky positions to use as objects from a possible 551. plFiberPlate : 12 possible sky positions to use as objects from a possible 550. plFiberPlate : 12 possible sky positions to use as objects from a possible 549. plFiberPlate : 16 possible sky positions to use as objects from a possible 548. plFiberPlate : 45 possible sky positions to use as objects from a possible 547. plFiberPlate : 18 possible sky positions to use as objects from a possible 546. plFiberPlate : 15 possible sky positions to use as objects from a possible 545. plFiberPlate : 8 possible sky positions to use as objects from a possible 544. plFiberPlate : 10 possible sky positions to use as objects from a possible 543. plFiberPlate : 11 possible sky positions to use as objects from a possible 542. plFiberPlate : 13 possible sky positions to use as objects from a possible 541. plFiberPlate : 12 possible sky positions to use as objects from a possible 540. plFiberPlate : 27 possible sky positions to use as objects from a possible 539. plFiberPlate : 51 possible sky positions to use as objects from a possible 538. plFiberPlate : 23 possible sky positions to use as objects from a possible 537. plFiberPlate : 22 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 13 possible sky positions to use as objects from a possible 534. plFiberPlate : 19 possible sky positions to use as objects from a possible 533. plFiberPlate : 21 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0938.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0939.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0939.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0940.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 89 2 8 50 3 12 73 4 14 108 5 14 121 6 14 96 7 12 97 8 14 121 9 16 98 10 22 138 11 19 85 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 134 40 plFiberPlate : adding spectro-photo std with objId = 2887 0 2 234 29 plFiberPlate : adding spectro-photo std with objId = 2887 0 1 242 45 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 249 12 plFiberPlate : adding spectro-photo std with objId = 2964 0 3 135 14 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 135 19 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 241 58 plFiberPlate : adding spectro-photo std with objId = 2887 0 2 243 21 plFiberPlate : 117 possible sky positions to use as objects from a possible 558. plFiberPlate : 100 possible sky positions to use as objects from a possible 557. plFiberPlate : 59 possible sky positions to use as objects from a possible 556. plFiberPlate : 34 possible sky positions to use as objects from a possible 555. plFiberPlate : 28 possible sky positions to use as objects from a possible 554. plFiberPlate : 26 possible sky positions to use as objects from a possible 553. plFiberPlate : 36 possible sky positions to use as objects from a possible 552. plFiberPlate : 75 possible sky positions to use as objects from a possible 551. plFiberPlate : 50 possible sky positions to use as objects from a possible 550. plFiberPlate : 25 possible sky positions to use as objects from a possible 549. plFiberPlate : 10 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 8 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 9 possible sky positions to use as objects from a possible 544. plFiberPlate : 26 possible sky positions to use as objects from a possible 543. plFiberPlate : 53 possible sky positions to use as objects from a possible 542. plFiberPlate : 32 possible sky positions to use as objects from a possible 541. plFiberPlate : 28 possible sky positions to use as objects from a possible 540. plFiberPlate : 18 possible sky positions to use as objects from a possible 539. plFiberPlate : 6 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 9 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : 65 possible sky positions to use as objects from a possible 533. plFiberPlate : 25 possible sky positions to use as objects from a possible 532. plFiberPlate : 12 possible sky positions to use as objects from a possible 531. plFiberPlate : 10 possible sky positions to use as objects from a possible 530. plFiberPlate : 12 possible sky positions to use as objects from a possible 529. plFiberPlate : 32 possible sky positions to use as objects from a possible 528. plFiberPlate : 14 possible sky positions to use as objects from a possible 527. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0939.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0940.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0940.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0941.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 117 2 12 78 3 10 80 4 8 101 5 17 127 6 18 112 7 13 96 8 15 98 9 12 105 10 16 147 11 19 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 140 10 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 263 28 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 249 12 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 135 19 plFiberPlate : adding spectro-photo std with objId = 2964 0 4 140 20 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 248 43 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 149 4 plFiberPlate : adding spectro-photo std with objId = 2887 0 5 261 45 plFiberPlate : 113 possible sky positions to use as objects from a possible 585. plFiberPlate : 75 possible sky positions to use as objects from a possible 584. plFiberPlate : 35 possible sky positions to use as objects from a possible 583. plFiberPlate : 23 possible sky positions to use as objects from a possible 582. plFiberPlate : 18 possible sky positions to use as objects from a possible 581. plFiberPlate : 40 possible sky positions to use as objects from a possible 580. plFiberPlate : 42 possible sky positions to use as objects from a possible 579. plFiberPlate : 76 possible sky positions to use as objects from a possible 578. plFiberPlate : 41 possible sky positions to use as objects from a possible 577. plFiberPlate : 30 possible sky positions to use as objects from a possible 576. plFiberPlate : 22 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 13 possible sky positions to use as objects from a possible 573. plFiberPlate : 22 possible sky positions to use as objects from a possible 572. plFiberPlate : 28 possible sky positions to use as objects from a possible 571. plFiberPlate : 27 possible sky positions to use as objects from a possible 570. plFiberPlate : 55 possible sky positions to use as objects from a possible 569. plFiberPlate : 34 possible sky positions to use as objects from a possible 568. plFiberPlate : 23 possible sky positions to use as objects from a possible 567. plFiberPlate : 13 possible sky positions to use as objects from a possible 566. plFiberPlate : 7 possible sky positions to use as objects from a possible 565. plFiberPlate : 10 possible sky positions to use as objects from a possible 564. plFiberPlate : 21 possible sky positions to use as objects from a possible 563. plFiberPlate : 15 possible sky positions to use as objects from a possible 562. plFiberPlate : 11 possible sky positions to use as objects from a possible 561. plFiberPlate : 22 possible sky positions to use as objects from a possible 560. plFiberPlate : 34 possible sky positions to use as objects from a possible 559. plFiberPlate : 18 possible sky positions to use as objects from a possible 558. plFiberPlate : 10 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 21 possible sky positions to use as objects from a possible 555. plFiberPlate : 11 possible sky positions to use as objects from a possible 554. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0940.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0941.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0941.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0942.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 102 2 16 49 3 19 71 4 13 112 5 13 129 6 9 95 7 4 95 8 11 108 9 9 109 10 28 135 11 17 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2887 0 2 268 33 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 167 12 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 271 39 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 267 2 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 159 20 plFiberPlate : adding spectro-photo std with objId = 2887 0 3 271 23 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 160 12 plFiberPlate : adding spectro-photo std with objId = 2887 0 5 261 45 plFiberPlate : 115 possible sky positions to use as objects from a possible 565. plFiberPlate : 60 possible sky positions to use as objects from a possible 564. plFiberPlate : 35 possible sky positions to use as objects from a possible 563. plFiberPlate : 22 possible sky positions to use as objects from a possible 562. plFiberPlate : 22 possible sky positions to use as objects from a possible 561. plFiberPlate : 32 possible sky positions to use as objects from a possible 560. plFiberPlate : 43 possible sky positions to use as objects from a possible 559. plFiberPlate : 59 possible sky positions to use as objects from a possible 558. plFiberPlate : 51 possible sky positions to use as objects from a possible 557. plFiberPlate : 24 possible sky positions to use as objects from a possible 556. plFiberPlate : 13 possible sky positions to use as objects from a possible 555. plFiberPlate : 17 possible sky positions to use as objects from a possible 554. plFiberPlate : 2 possible sky positions to use as objects from a possible 553. plFiberPlate : 17 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 19 possible sky positions to use as objects from a possible 550. plFiberPlate : 78 possible sky positions to use as objects from a possible 549. plFiberPlate : 56 possible sky positions to use as objects from a possible 548. plFiberPlate : 39 possible sky positions to use as objects from a possible 547. plFiberPlate : 24 possible sky positions to use as objects from a possible 546. plFiberPlate : 7 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 16 possible sky positions to use as objects from a possible 543. plFiberPlate : 12 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : 59 possible sky positions to use as objects from a possible 540. plFiberPlate : 29 possible sky positions to use as objects from a possible 539. plFiberPlate : 14 possible sky positions to use as objects from a possible 538. plFiberPlate : 14 possible sky positions to use as objects from a possible 537. plFiberPlate : 5 possible sky positions to use as objects from a possible 536. plFiberPlate : 27 possible sky positions to use as objects from a possible 535. plFiberPlate : 21 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0941.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0942.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0942.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0943.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 101 2 9 72 3 12 86 4 9 114 5 13 125 6 12 94 7 4 97 8 4 123 9 8 117 10 22 159 11 16 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 171 43 plFiberPlate : adding spectro-photo std with objId = 2964 0 5 173 24 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 290 21 plFiberPlate : adding spectro-photo std with objId = 2887 0 2 287 66 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 278 2 plFiberPlate : adding spectro-photo std with objId = 2964 0 1 167 74 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 279 25 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 286 18 plFiberPlate : 126 possible sky positions to use as objects from a possible 597. plFiberPlate : 87 possible sky positions to use as objects from a possible 596. plFiberPlate : 70 possible sky positions to use as objects from a possible 595. plFiberPlate : 37 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 28 possible sky positions to use as objects from a possible 592. plFiberPlate : 42 possible sky positions to use as objects from a possible 591. plFiberPlate : 90 possible sky positions to use as objects from a possible 590. plFiberPlate : 54 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 10 possible sky positions to use as objects from a possible 586. plFiberPlate : 14 possible sky positions to use as objects from a possible 585. plFiberPlate : 8 possible sky positions to use as objects from a possible 584. plFiberPlate : 7 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 66 possible sky positions to use as objects from a possible 581. plFiberPlate : 53 possible sky positions to use as objects from a possible 580. plFiberPlate : 43 possible sky positions to use as objects from a possible 579. plFiberPlate : 29 possible sky positions to use as objects from a possible 578. plFiberPlate : 9 possible sky positions to use as objects from a possible 577. plFiberPlate : 16 possible sky positions to use as objects from a possible 576. plFiberPlate : 25 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : 13 possible sky positions to use as objects from a possible 573. plFiberPlate : 57 possible sky positions to use as objects from a possible 572. plFiberPlate : 33 possible sky positions to use as objects from a possible 571. plFiberPlate : 13 possible sky positions to use as objects from a possible 570. plFiberPlate : 6 possible sky positions to use as objects from a possible 569. plFiberPlate : 26 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 16 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0942.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0943.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0943.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.2/plPlugMapP-0944.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 92 2 5 67 3 14 90 4 13 123 5 15 142 6 17 101 7 6 61 8 5 49 9 7 107 10 14 161 11 9 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 0 2 187 6 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 290 21 plFiberPlate : adding spectro-photo std with objId = 2887 0 2 287 66 plFiberPlate : adding spectro-photo std with objId = 2887 0 4 294 31 plFiberPlate : adding spectro-photo std with objId = 2887 0 1 300 10 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 286 18 plFiberPlate : adding spectro-photo std with objId = 2887 0 6 294 32 plFiberPlate : adding spectro-photo std with objId = 2964 0 6 184 4 plFiberPlate : 131 possible sky positions to use as objects from a possible 543. plFiberPlate : 78 possible sky positions to use as objects from a possible 542. plFiberPlate : 24 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 11 possible sky positions to use as objects from a possible 539. plFiberPlate : 27 possible sky positions to use as objects from a possible 538. plFiberPlate : 43 possible sky positions to use as objects from a possible 537. plFiberPlate : 87 possible sky positions to use as objects from a possible 536. plFiberPlate : 49 possible sky positions to use as objects from a possible 535. plFiberPlate : 32 possible sky positions to use as objects from a possible 534. plFiberPlate : 2 possible sky positions to use as objects from a possible 533. plFiberPlate : 3 possible sky positions to use as objects from a possible 532. plFiberPlate : 10 possible sky positions to use as objects from a possible 531. plFiberPlate : 11 possible sky positions to use as objects from a possible 530. plFiberPlate : 6 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 95 possible sky positions to use as objects from a possible 527. plFiberPlate : 64 possible sky positions to use as objects from a possible 526. plFiberPlate : 41 possible sky positions to use as objects from a possible 525. plFiberPlate : 23 possible sky positions to use as objects from a possible 524. plFiberPlate : 8 possible sky positions to use as objects from a possible 523. plFiberPlate : 23 possible sky positions to use as objects from a possible 522. plFiberPlate : 7 possible sky positions to use as objects from a possible 521. plFiberPlate : 7 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 54 possible sky positions to use as objects from a possible 518. plFiberPlate : 24 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 5 possible sky positions to use as objects from a possible 515. plFiberPlate : 4 possible sky positions to use as objects from a possible 514. plFiberPlate : 3 possible sky positions to use as objects from a possible 513. plFiberPlate : 8 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0943.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0944.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.2/plOverlay-0944.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Mar 13 15:40:06 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 18 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0927.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0927.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0927.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0928.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0928.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0928.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.5417,11.1137) and (1.22,12.51) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0929.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0929.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.9273,-9.8578) and (12.00,-2.10) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0929.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0930.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2891,-2.9552) and (-12.65,-1.43) plMakeFanucCodes : fixed path between (-5.6056,-11.5086) and (-3.82,-11.91) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0930.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0930.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0931.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0931.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0931.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0932.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0932.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0932.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0933.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.0907,12.0516) and (2.43,12.35) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0933.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0933.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0934.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.4669,7.3346) and (11.22,6.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0934.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0934.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0935.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7818,6.3063) and (11.69,5.15) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0935.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0935.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0936.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0936.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0936.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0937.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0937.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0937.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0938.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.6143,-11.1371) and (-3.44,-12.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0938.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0938.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0939.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0939.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0939.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0940.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0940.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0940.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0941.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-2.7829,-12.4917) and (-1.30,-12.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0941.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0941.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0942.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4988,-4.8024) and (12.33,-2.96) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0942.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0942.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0943.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0943.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0943.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0944.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0944.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.2/plFanuc-0944.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Mar 13 15:41:33 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e46c68 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 18 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 927 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 928 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 929 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 930 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 931 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 932 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 933 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 934 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 935 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 936 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 937 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 938 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 939 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 940 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 941 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 942 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 943 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 944 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs -1.9 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Mar 13 15:42:02 CST 2002 Begin running plateEnder dr2002.03.2 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.03.2 -morePipes 1 failed. PS: Read file for stderr output of this job.