Sender: LSF System Subject: Job 32498: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Mar 3 17:48:50 2003 Results reported at Mon Mar 3 17:53:27 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_224 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.03.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 254.89 sec. Max Memory : 10 MB Max Swap : 33 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Mar 3 17:48:53 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Mar 3 17:48:55 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_11_5OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_58/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_224/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_17/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_16/OSF1/bin:/sdss/ups/prd/sdssmath/v5_12/OSF1/bin:/sdss/ups/prd/astrotools/v5_14/OSF1/bin:/sdss/ups/prd/plate/v3_8/OSF1/bin --------------------------------------------------------------- Mon Mar 3 17:48:55 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_11_5OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_224/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_16/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_58/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_8/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_p30054 --------------------------------------------------------------- --------------------------------------------------------------- Mon Mar 3 17:48:55 CST 2003 Begin running plate --------------------------------------------------------------- Mon Mar 3 17:48:55 CST 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e9ece8 makePlates : beginning loop over plObs chain; makePlates : making 17 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0906.par makePlates : plateInfo struct for plate 1278 : (h4).mjd 52728 (h4).raCen 189.8833 (h4).decCen 49.93061 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 189.883 49.931 189.883 51.431 plMakePlateFromTile : mjd of obs : 52728.767740 Observed HA/dec of plate center, fiducial point (deg) : 19.998 49.908 19.997 51.408 The rotation angle of the fid. point is -131.638869 plMakePlateFromTile : beginning loop over 1272 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0907.par makePlates : plateInfo struct for plate 1279 : (h4).mjd 52728 (h4).raCen 192.4585 (h4).decCen 49.80244 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 192.458 49.802 192.458 51.302 plMakePlateFromTile : mjd of obs : 52728.766557 Observed HA/dec of plate center, fiducial point (deg) : 16.998 49.780 16.997 51.279 The rotation angle of the fid. point is -137.072552 plMakePlateFromTile : beginning loop over 1268 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0908.par makePlates : plateInfo struct for plate 1280 : (h4).mjd 52728 (h4).raCen 195.4138 (h4).decCen 49.49072 (h4).haCen 14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 195.414 49.491 195.414 50.991 plMakePlateFromTile : mjd of obs : 52728.766427 Observed HA/dec of plate center, fiducial point (deg) : 13.998 49.468 13.997 50.967 The rotation angle of the fid. point is -142.820130 plMakePlateFromTile : beginning loop over 1269 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0909.par makePlates : plateInfo struct for plate 1281 : (h4).mjd 52728 (h4).raCen 197.8497 (h4).decCen 49.2474 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 197.850 49.247 197.850 50.747 plMakePlateFromTile : mjd of obs : 52728.767630 Observed HA/dec of plate center, fiducial point (deg) : 11.998 49.225 11.998 50.724 The rotation angle of the fid. point is -147.000854 plMakePlateFromTile : beginning loop over 1244 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0910.par makePlates : plateInfo struct for plate 1282 : (h4).mjd 52728 (h4).raCen 200.711 (h4).decCen 48.94897 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 200.711 48.949 200.711 50.449 plMakePlateFromTile : mjd of obs : 52728.767239 Observed HA/dec of plate center, fiducial point (deg) : 8.998 48.926 8.998 50.426 The rotation angle of the fid. point is -154.055768 plMakePlateFromTile : beginning loop over 1232 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0911.par makePlates : plateInfo struct for plate 1283 : (h4).mjd 52728 (h4).raCen 203.739 (h4).decCen 48.47769 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.739 48.478 203.739 49.978 plMakePlateFromTile : mjd of obs : 52728.767311 Observed HA/dec of plate center, fiducial point (deg) : 5.998 48.455 5.998 49.955 The rotation angle of the fid. point is -161.770916 plMakePlateFromTile : beginning loop over 1241 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0912.par makePlates : plateInfo struct for plate 1284 : (h4).mjd 52728 (h4).raCen 206.6819 (h4).decCen 47.94361 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 206.682 47.944 206.682 49.444 plMakePlateFromTile : mjd of obs : 52728.808716 Observed HA/dec of plate center, fiducial point (deg) : 17.998 47.922 17.998 49.421 The rotation angle of the fid. point is -131.601210 plMakePlateFromTile : beginning loop over 1249 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0913.par makePlates : plateInfo struct for plate 1285 : (h4).mjd 52728 (h4).raCen 209.4664 (h4).decCen 47.28177 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 209.466 47.282 209.466 48.782 plMakePlateFromTile : mjd of obs : 52728.808113 Observed HA/dec of plate center, fiducial point (deg) : 14.998 47.260 14.998 48.759 The rotation angle of the fid. point is -136.466798 plMakePlateFromTile : beginning loop over 1225 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0914.par makePlates : plateInfo struct for plate 1286 : (h4).mjd 52728 (h4).raCen 212.3222 (h4).decCen 46.64401 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 212.322 46.644 212.322 48.144 plMakePlateFromTile : mjd of obs : 52728.807708 Observed HA/dec of plate center, fiducial point (deg) : 11.998 46.622 11.998 48.122 The rotation angle of the fid. point is -142.275008 plMakePlateFromTile : beginning loop over 1225 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0915.par makePlates : plateInfo struct for plate 1287 : (h4).mjd 52728 (h4).raCen 215.3625 (h4).decCen 45.83342 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 215.363 45.833 215.363 47.333 plMakePlateFromTile : mjd of obs : 52728.807814 Observed HA/dec of plate center, fiducial point (deg) : 8.998 45.812 8.998 47.312 The rotation angle of the fid. point is -148.917110 plMakePlateFromTile : beginning loop over 1191 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0916.par makePlates : plateInfo struct for plate 1288 : (h4).mjd 52728 (h4).raCen 218.0477 (h4).decCen 44.98646 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 218.048 44.986 218.048 46.486 plMakePlateFromTile : mjd of obs : 52728.806937 Observed HA/dec of plate center, fiducial point (deg) : 5.998 44.966 5.998 46.465 The rotation angle of the fid. point is -157.092877 plMakePlateFromTile : beginning loop over 1221 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0917.par makePlates : plateInfo struct for plate 1289 : (h4).mjd 52728 (h4).raCen 220.8459 (h4).decCen 44.01466 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 220.846 44.015 220.846 45.515 plMakePlateFromTile : mjd of obs : 52728.809144 Observed HA/dec of plate center, fiducial point (deg) : 3.998 43.995 3.998 45.494 The rotation angle of the fid. point is -163.119776 plMakePlateFromTile : beginning loop over 1211 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0918.par makePlates : plateInfo struct for plate 1290 : (h4).mjd 52728 (h4).raCen 223.7295 (h4).decCen 42.89813 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 223.730 42.898 223.730 44.398 plMakePlateFromTile : mjd of obs : 52728.850384 Observed HA/dec of plate center, fiducial point (deg) : 15.998 42.879 15.998 44.379 The rotation angle of the fid. point is -123.476545 plMakePlateFromTile : beginning loop over 1182 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0919.par makePlates : plateInfo struct for plate 1291 : (h4).mjd 52728 (h4).raCen 226.5922 (h4).decCen 41.74917 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 226.592 41.749 226.592 43.249 plMakePlateFromTile : mjd of obs : 52728.849999 Observed HA/dec of plate center, fiducial point (deg) : 12.998 41.731 12.998 43.230 The rotation angle of the fid. point is -126.766294 plMakePlateFromTile : beginning loop over 1182 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0920.par makePlates : plateInfo struct for plate 1292 : (h4).mjd 52728 (h4).raCen 229.0978 (h4).decCen 40.53075 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 229.098 40.531 229.098 42.031 plMakePlateFromTile : mjd of obs : 52728.848626 Observed HA/dec of plate center, fiducial point (deg) : 9.998 40.513 9.998 42.012 The rotation angle of the fid. point is -130.870946 plMakePlateFromTile : beginning loop over 1140 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0921.par makePlates : plateInfo struct for plate 1293 : (h4).mjd 52728 (h4).raCen 231.7157 (h4).decCen 39.34148 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 231.716 39.341 231.716 40.841 plMakePlateFromTile : mjd of obs : 52728.850335 Observed HA/dec of plate center, fiducial point (deg) : 7.998 39.324 7.998 40.824 The rotation angle of the fid. point is -132.935193 plMakePlateFromTile : beginning loop over 1164 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk65/complete//plPlugMapT-0922.par makePlates : plateInfo struct for plate 1294 : (h4).mjd 52728 (h4).raCen 234.0553 (h4).decCen 37.92604 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 234.055 37.926 234.055 39.426 plMakePlateFromTile : mjd of obs : 52728.890068 Observed HA/dec of plate center, fiducial point (deg) : 19.998 37.910 19.998 39.410 The rotation angle of the fid. point is -101.466459 plMakePlateFromTile : beginning loop over 1114 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (137.83, -280.54, 5.9) and (138.01, -280.76, 5.0) checkLTHo : distance = 0.282, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(137.83, -280.54, 5.9) makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Mar 3 17:49:44 CST 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 17 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1278.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 129 2 3 94 3 3 72 4 10 100 5 6 124 6 4 90 7 9 88 8 5 112 9 5 96 10 9 161 11 7 126 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 347 12 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 348 51 plFiberPlate : adding spectro-photo std with objId = 3650 20 2 26 79 plFiberPlate : adding spectro-photo std with objId = 3650 20 2 28 36 plFiberPlate : adding spectro-photo std with objId = 2964 20 6 346 70 plFiberPlate : adding spectro-photo std with objId = 3650 20 4 32 24 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 343 49 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 351 23 plFiberPlate : 132 possible sky positions to use as objects from a possible 592. plFiberPlate : 90 possible sky positions to use as objects from a possible 591. plFiberPlate : 54 possible sky positions to use as objects from a possible 590. plFiberPlate : 43 possible sky positions to use as objects from a possible 589. plFiberPlate : 38 possible sky positions to use as objects from a possible 588. plFiberPlate : 49 possible sky positions to use as objects from a possible 587. plFiberPlate : 39 possible sky positions to use as objects from a possible 586. plFiberPlate : 74 possible sky positions to use as objects from a possible 585. plFiberPlate : 28 possible sky positions to use as objects from a possible 584. plFiberPlate : 26 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 12 possible sky positions to use as objects from a possible 581. plFiberPlate : 11 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 18 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 54 possible sky positions to use as objects from a possible 576. plFiberPlate : 23 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 6 possible sky positions to use as objects from a possible 573. plFiberPlate : 11 possible sky positions to use as objects from a possible 572. plFiberPlate : 5 possible sky positions to use as objects from a possible 571. plFiberPlate : 15 possible sky positions to use as objects from a possible 570. plFiberPlate : 22 possible sky positions to use as objects from a possible 569. plFiberPlate : 7 possible sky positions to use as objects from a possible 568. plFiberPlate : 48 possible sky positions to use as objects from a possible 567. plFiberPlate : 34 possible sky positions to use as objects from a possible 566. plFiberPlate : 32 possible sky positions to use as objects from a possible 565. plFiberPlate : 21 possible sky positions to use as objects from a possible 564. plFiberPlate : 15 possible sky positions to use as objects from a possible 563. plFiberPlate : 21 possible sky positions to use as objects from a possible 562. plFiberPlate : 19 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1278.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1278.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1279.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 119 2 5 91 3 2 84 4 6 114 5 3 118 6 6 100 7 7 93 8 5 103 9 3 105 10 6 148 11 3 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 352 37 plFiberPlate : adding spectro-photo std with objId = 3650 20 1 38 23 plFiberPlate : adding spectro-photo std with objId = 2964 20 6 351 95 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 348 51 plFiberPlate : adding spectro-photo std with objId = 3650 20 4 32 24 plFiberPlate : adding spectro-photo std with objId = 3650 20 2 45 101 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 44 57 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 351 23 plFiberPlate : 131 possible sky positions to use as objects from a possible 595. plFiberPlate : 76 possible sky positions to use as objects from a possible 594. plFiberPlate : 47 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 37 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 57 possible sky positions to use as objects from a possible 589. plFiberPlate : 71 possible sky positions to use as objects from a possible 588. plFiberPlate : 45 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 11 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : 10 possible sky positions to use as objects from a possible 582. plFiberPlate : 22 possible sky positions to use as objects from a possible 581. plFiberPlate : 14 possible sky positions to use as objects from a possible 580. plFiberPlate : 77 possible sky positions to use as objects from a possible 579. plFiberPlate : 48 possible sky positions to use as objects from a possible 578. plFiberPlate : 25 possible sky positions to use as objects from a possible 577. plFiberPlate : 12 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : 9 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 12 possible sky positions to use as objects from a possible 572. plFiberPlate : 11 possible sky positions to use as objects from a possible 571. plFiberPlate : 44 possible sky positions to use as objects from a possible 570. plFiberPlate : 33 possible sky positions to use as objects from a possible 569. plFiberPlate : 19 possible sky positions to use as objects from a possible 568. plFiberPlate : 21 possible sky positions to use as objects from a possible 567. plFiberPlate : 26 possible sky positions to use as objects from a possible 566. plFiberPlate : 9 possible sky positions to use as objects from a possible 565. plFiberPlate : 7 possible sky positions to use as objects from a possible 564. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1278.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1279.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1279.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1280.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 120 2 9 88 3 6 69 4 6 100 5 4 126 6 4 81 7 5 96 8 6 123 9 2 100 10 14 157 11 11 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3650 20 2 58 21 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 56 28 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 58 14 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 374 35 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 374 34 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 373 49 plFiberPlate : adding spectro-photo std with objId = 3650 20 2 45 101 plFiberPlate : adding spectro-photo std with objId = 3650 20 1 52 99 plFiberPlate : 131 possible sky positions to use as objects from a possible 591. plFiberPlate : 88 possible sky positions to use as objects from a possible 590. plFiberPlate : 61 possible sky positions to use as objects from a possible 589. plFiberPlate : 33 possible sky positions to use as objects from a possible 588. plFiberPlate : 37 possible sky positions to use as objects from a possible 587. plFiberPlate : 30 possible sky positions to use as objects from a possible 586. plFiberPlate : 48 possible sky positions to use as objects from a possible 585. plFiberPlate : 87 possible sky positions to use as objects from a possible 584. plFiberPlate : 82 possible sky positions to use as objects from a possible 583. plFiberPlate : 40 possible sky positions to use as objects from a possible 582. plFiberPlate : 12 possible sky positions to use as objects from a possible 581. plFiberPlate : 22 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 8 possible sky positions to use as objects from a possible 577. plFiberPlate : 25 possible sky positions to use as objects from a possible 576. plFiberPlate : 84 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 15 possible sky positions to use as objects from a possible 573. plFiberPlate : 9 possible sky positions to use as objects from a possible 572. plFiberPlate : 4 possible sky positions to use as objects from a possible 571. plFiberPlate : 6 possible sky positions to use as objects from a possible 570. plFiberPlate : 28 possible sky positions to use as objects from a possible 569. plFiberPlate : 15 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 32 possible sky positions to use as objects from a possible 566. plFiberPlate : 19 possible sky positions to use as objects from a possible 565. plFiberPlate : 6 possible sky positions to use as objects from a possible 564. plFiberPlate : 3 possible sky positions to use as objects from a possible 563. plFiberPlate : 5 possible sky positions to use as objects from a possible 562. plFiberPlate : 10 possible sky positions to use as objects from a possible 561. plFiberPlate : 18 possible sky positions to use as objects from a possible 560. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1279.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1280.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1280.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1281.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 126 2 2 78 3 2 64 4 9 109 5 6 136 6 1 99 7 3 71 8 7 115 9 0 92 10 7 135 11 3 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 9 at 14.000 131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 377 36 plFiberPlate : adding spectro-photo std with objId = 3650 20 3 73 80 plFiberPlate : adding spectro-photo std with objId = 3650 20 2 69 30 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 58 14 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 371 57 plFiberPlate : adding spectro-photo std with objId = 3650 20 3 69 55 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 385 29 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 373 49 plFiberPlate : 122 possible sky positions to use as objects from a possible 577. plFiberPlate : 50 possible sky positions to use as objects from a possible 576. plFiberPlate : 23 possible sky positions to use as objects from a possible 575. plFiberPlate : 13 possible sky positions to use as objects from a possible 574. plFiberPlate : 24 possible sky positions to use as objects from a possible 573. plFiberPlate : 33 possible sky positions to use as objects from a possible 572. plFiberPlate : 54 possible sky positions to use as objects from a possible 571. plFiberPlate : 92 possible sky positions to use as objects from a possible 570. plFiberPlate : 56 possible sky positions to use as objects from a possible 569. plFiberPlate : 34 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 7 possible sky positions to use as objects from a possible 566. plFiberPlate : 12 possible sky positions to use as objects from a possible 565. plFiberPlate : 13 possible sky positions to use as objects from a possible 564. plFiberPlate : 31 possible sky positions to use as objects from a possible 563. plFiberPlate : 25 possible sky positions to use as objects from a possible 562. plFiberPlate : 76 possible sky positions to use as objects from a possible 561. plFiberPlate : 61 possible sky positions to use as objects from a possible 560. plFiberPlate : 47 possible sky positions to use as objects from a possible 559. plFiberPlate : 19 possible sky positions to use as objects from a possible 558. plFiberPlate : 6 possible sky positions to use as objects from a possible 557. plFiberPlate : 2 possible sky positions to use as objects from a possible 556. plFiberPlate : 5 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 35 possible sky positions to use as objects from a possible 553. plFiberPlate : 68 possible sky positions to use as objects from a possible 552. plFiberPlate : 46 possible sky positions to use as objects from a possible 551. plFiberPlate : 18 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 7 possible sky positions to use as objects from a possible 548. plFiberPlate : 15 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1280.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1281.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1281.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1282.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 125 2 7 91 3 8 70 4 9 101 5 8 123 6 5 86 7 4 55 8 6 84 9 7 105 10 16 153 11 12 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3650 20 4 85 104 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 382 30 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 393 62 plFiberPlate : adding spectro-photo std with objId = 3650 20 3 69 55 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 385 29 plFiberPlate : adding spectro-photo std with objId = 3650 20 5 76 30 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 76 35 plFiberPlate : adding spectro-photo std with objId = 3650 20 1 76 15 plFiberPlate : 115 possible sky positions to use as objects from a possible 541. plFiberPlate : 81 possible sky positions to use as objects from a possible 540. plFiberPlate : 52 possible sky positions to use as objects from a possible 539. plFiberPlate : 31 possible sky positions to use as objects from a possible 538. plFiberPlate : 20 possible sky positions to use as objects from a possible 537. plFiberPlate : 37 possible sky positions to use as objects from a possible 536. plFiberPlate : 67 possible sky positions to use as objects from a possible 535. plFiberPlate : 65 possible sky positions to use as objects from a possible 534. plFiberPlate : 50 possible sky positions to use as objects from a possible 533. plFiberPlate : 34 possible sky positions to use as objects from a possible 532. plFiberPlate : 19 possible sky positions to use as objects from a possible 531. plFiberPlate : 7 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : 25 possible sky positions to use as objects from a possible 527. plFiberPlate : 19 possible sky positions to use as objects from a possible 526. plFiberPlate : 85 possible sky positions to use as objects from a possible 525. plFiberPlate : 50 possible sky positions to use as objects from a possible 524. plFiberPlate : 40 possible sky positions to use as objects from a possible 523. plFiberPlate : 20 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 11 possible sky positions to use as objects from a possible 520. plFiberPlate : 13 possible sky positions to use as objects from a possible 519. plFiberPlate : 17 possible sky positions to use as objects from a possible 518. plFiberPlate : 10 possible sky positions to use as objects from a possible 517. plFiberPlate : 50 possible sky positions to use as objects from a possible 516. plFiberPlate : 34 possible sky positions to use as objects from a possible 515. plFiberPlate : 17 possible sky positions to use as objects from a possible 514. plFiberPlate : 18 possible sky positions to use as objects from a possible 513. plFiberPlate : 2 possible sky positions to use as objects from a possible 512. plFiberPlate : 8 possible sky positions to use as objects from a possible 511. plFiberPlate : 8 possible sky positions to use as objects from a possible 510. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1281.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1282.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1282.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1283.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 126 2 13 82 3 3 69 4 8 103 5 9 122 6 2 79 7 2 55 8 1 96 9 7 96 10 15 147 11 17 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 404 70 plFiberPlate : adding spectro-photo std with objId = 3650 20 2 93 18 plFiberPlate : adding spectro-photo std with objId = 3650 20 5 99 28 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 411 61 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 92 50 plFiberPlate : adding spectro-photo std with objId = 3650 20 3 100 103 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 402 94 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 401 55 plFiberPlate : 114 possible sky positions to use as objects from a possible 541. plFiberPlate : 71 possible sky positions to use as objects from a possible 540. plFiberPlate : 33 possible sky positions to use as objects from a possible 539. plFiberPlate : 19 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 27 possible sky positions to use as objects from a possible 536. plFiberPlate : 56 possible sky positions to use as objects from a possible 535. plFiberPlate : 88 possible sky positions to use as objects from a possible 534. plFiberPlate : 55 possible sky positions to use as objects from a possible 533. plFiberPlate : 45 possible sky positions to use as objects from a possible 532. plFiberPlate : 30 possible sky positions to use as objects from a possible 531. plFiberPlate : 21 possible sky positions to use as objects from a possible 530. plFiberPlate : 11 possible sky positions to use as objects from a possible 529. plFiberPlate : 9 possible sky positions to use as objects from a possible 528. plFiberPlate : 26 possible sky positions to use as objects from a possible 527. plFiberPlate : 29 possible sky positions to use as objects from a possible 526. plFiberPlate : 75 possible sky positions to use as objects from a possible 525. plFiberPlate : 71 possible sky positions to use as objects from a possible 524. plFiberPlate : 37 possible sky positions to use as objects from a possible 523. plFiberPlate : 21 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 11 possible sky positions to use as objects from a possible 520. plFiberPlate : 15 possible sky positions to use as objects from a possible 519. plFiberPlate : 31 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 56 possible sky positions to use as objects from a possible 516. plFiberPlate : 34 possible sky positions to use as objects from a possible 515. plFiberPlate : 24 possible sky positions to use as objects from a possible 514. plFiberPlate : 14 possible sky positions to use as objects from a possible 513. plFiberPlate : 3 possible sky positions to use as objects from a possible 512. plFiberPlate : 9 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1282.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1283.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1283.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1284.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 128 2 9 86 3 6 64 4 11 92 5 7 125 6 3 79 7 7 56 8 6 93 9 8 104 10 8 144 11 4 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 424 79 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 423 61 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 411 61 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 105 35 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 425 2 plFiberPlate : adding spectro-photo std with objId = 3650 20 3 100 103 plFiberPlate : adding spectro-photo std with objId = 3650 20 3 101 22 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 421 74 plFiberPlate : 90 possible sky positions to use as objects from a possible 546. plFiberPlate : 73 possible sky positions to use as objects from a possible 545. plFiberPlate : 46 possible sky positions to use as objects from a possible 544. plFiberPlate : 15 possible sky positions to use as objects from a possible 543. plFiberPlate : 22 possible sky positions to use as objects from a possible 542. plFiberPlate : 40 possible sky positions to use as objects from a possible 541. plFiberPlate : 52 possible sky positions to use as objects from a possible 540. plFiberPlate : 80 possible sky positions to use as objects from a possible 539. plFiberPlate : 63 possible sky positions to use as objects from a possible 538. plFiberPlate : 44 possible sky positions to use as objects from a possible 537. plFiberPlate : 34 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 8 possible sky positions to use as objects from a possible 534. plFiberPlate : 15 possible sky positions to use as objects from a possible 533. plFiberPlate : 37 possible sky positions to use as objects from a possible 532. plFiberPlate : 21 possible sky positions to use as objects from a possible 531. plFiberPlate : 68 possible sky positions to use as objects from a possible 530. plFiberPlate : 45 possible sky positions to use as objects from a possible 529. plFiberPlate : 37 possible sky positions to use as objects from a possible 528. plFiberPlate : 23 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 11 possible sky positions to use as objects from a possible 524. plFiberPlate : 22 possible sky positions to use as objects from a possible 523. plFiberPlate : 16 possible sky positions to use as objects from a possible 522. plFiberPlate : 43 possible sky positions to use as objects from a possible 521. plFiberPlate : 37 possible sky positions to use as objects from a possible 520. plFiberPlate : 24 possible sky positions to use as objects from a possible 519. plFiberPlate : 13 possible sky positions to use as objects from a possible 518. plFiberPlate : 10 possible sky positions to use as objects from a possible 517. plFiberPlate : 14 possible sky positions to use as objects from a possible 516. plFiberPlate : 17 possible sky positions to use as objects from a possible 515. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1283.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1284.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1284.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1285.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 109 2 6 73 3 3 49 4 8 90 5 8 129 6 3 94 7 3 68 8 6 101 9 4 106 10 11 137 11 5 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3650 20 3 126 31 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 437 27 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 428 18 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 425 2 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 438 21 plFiberPlate : adding spectro-photo std with objId = 3650 20 5 119 60 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 438 91 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 421 74 plFiberPlate : 86 possible sky positions to use as objects from a possible 532. plFiberPlate : 67 possible sky positions to use as objects from a possible 531. plFiberPlate : 50 possible sky positions to use as objects from a possible 530. plFiberPlate : 25 possible sky positions to use as objects from a possible 529. plFiberPlate : 23 possible sky positions to use as objects from a possible 528. plFiberPlate : 45 possible sky positions to use as objects from a possible 527. plFiberPlate : 36 possible sky positions to use as objects from a possible 526. plFiberPlate : 84 possible sky positions to use as objects from a possible 525. plFiberPlate : 52 possible sky positions to use as objects from a possible 524. plFiberPlate : 37 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 10 possible sky positions to use as objects from a possible 520. plFiberPlate : 12 possible sky positions to use as objects from a possible 519. plFiberPlate : 30 possible sky positions to use as objects from a possible 518. plFiberPlate : 18 possible sky positions to use as objects from a possible 517. plFiberPlate : 79 possible sky positions to use as objects from a possible 516. plFiberPlate : 29 possible sky positions to use as objects from a possible 515. plFiberPlate : 13 possible sky positions to use as objects from a possible 514. plFiberPlate : 6 possible sky positions to use as objects from a possible 513. plFiberPlate : 4 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 13 possible sky positions to use as objects from a possible 510. plFiberPlate : 30 possible sky positions to use as objects from a possible 509. plFiberPlate : 23 possible sky positions to use as objects from a possible 508. plFiberPlate : 64 possible sky positions to use as objects from a possible 507. plFiberPlate : 45 possible sky positions to use as objects from a possible 506. plFiberPlate : 16 possible sky positions to use as objects from a possible 505. plFiberPlate : 11 possible sky positions to use as objects from a possible 504. plFiberPlate : 17 possible sky positions to use as objects from a possible 503. plFiberPlate : 3 possible sky positions to use as objects from a possible 502. plFiberPlate : 8 possible sky positions to use as objects from a possible 501. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1284.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1285.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1285.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1286.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 115 2 10 82 3 16 57 4 13 91 5 7 138 6 2 81 7 4 58 8 7 99 9 3 108 10 20 143 11 9 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3664 20 1 31 105 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 33 27 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 126 79 plFiberPlate : adding spectro-photo std with objId = 3650 20 6 123 96 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 441 64 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 442 79 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 438 21 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 438 91 plFiberPlate : 88 possible sky positions to use as objects from a possible 530. plFiberPlate : 68 possible sky positions to use as objects from a possible 529. plFiberPlate : 36 possible sky positions to use as objects from a possible 528. plFiberPlate : 39 possible sky positions to use as objects from a possible 527. plFiberPlate : 25 possible sky positions to use as objects from a possible 526. plFiberPlate : 29 possible sky positions to use as objects from a possible 525. plFiberPlate : 25 possible sky positions to use as objects from a possible 524. plFiberPlate : 72 possible sky positions to use as objects from a possible 523. plFiberPlate : 55 possible sky positions to use as objects from a possible 522. plFiberPlate : 35 possible sky positions to use as objects from a possible 521. plFiberPlate : 23 possible sky positions to use as objects from a possible 520. plFiberPlate : 23 possible sky positions to use as objects from a possible 519. plFiberPlate : 4 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 21 possible sky positions to use as objects from a possible 516. plFiberPlate : 24 possible sky positions to use as objects from a possible 515. plFiberPlate : 66 possible sky positions to use as objects from a possible 514. plFiberPlate : 43 possible sky positions to use as objects from a possible 513. plFiberPlate : 26 possible sky positions to use as objects from a possible 512. plFiberPlate : 17 possible sky positions to use as objects from a possible 511. plFiberPlate : 11 possible sky positions to use as objects from a possible 510. plFiberPlate : 15 possible sky positions to use as objects from a possible 509. plFiberPlate : 13 possible sky positions to use as objects from a possible 508. plFiberPlate : 13 possible sky positions to use as objects from a possible 507. plFiberPlate : 15 possible sky positions to use as objects from a possible 506. plFiberPlate : 65 possible sky positions to use as objects from a possible 505. plFiberPlate : 31 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 11 possible sky positions to use as objects from a possible 502. plFiberPlate : 10 possible sky positions to use as objects from a possible 501. plFiberPlate : 18 possible sky positions to use as objects from a possible 500. plFiberPlate : 12 possible sky positions to use as objects from a possible 499. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1285.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1286.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1286.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1287.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 131 2 5 81 3 3 53 4 3 90 5 10 124 6 6 87 7 4 51 8 2 80 9 5 103 10 8 144 11 6 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 462 99 plFiberPlate : adding spectro-photo std with objId = 3664 20 6 38 5 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 457 65 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 461 18 plFiberPlate : adding spectro-photo std with objId = 2964 20 6 459 10 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 49 110 plFiberPlate : adding spectro-photo std with objId = 3664 20 5 47 70 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 466 6 plFiberPlate : 93 possible sky positions to use as objects from a possible 517. plFiberPlate : 38 possible sky positions to use as objects from a possible 516. plFiberPlate : 8 possible sky positions to use as objects from a possible 515. plFiberPlate : 13 possible sky positions to use as objects from a possible 514. plFiberPlate : 22 possible sky positions to use as objects from a possible 513. plFiberPlate : 32 possible sky positions to use as objects from a possible 512. plFiberPlate : 61 possible sky positions to use as objects from a possible 511. plFiberPlate : 75 possible sky positions to use as objects from a possible 510. plFiberPlate : 55 possible sky positions to use as objects from a possible 509. plFiberPlate : 43 possible sky positions to use as objects from a possible 508. plFiberPlate : 34 possible sky positions to use as objects from a possible 507. plFiberPlate : 17 possible sky positions to use as objects from a possible 506. plFiberPlate : 10 possible sky positions to use as objects from a possible 505. plFiberPlate : 22 possible sky positions to use as objects from a possible 504. plFiberPlate : 27 possible sky positions to use as objects from a possible 503. plFiberPlate : 27 possible sky positions to use as objects from a possible 502. plFiberPlate : 70 possible sky positions to use as objects from a possible 501. plFiberPlate : 35 possible sky positions to use as objects from a possible 500. plFiberPlate : 16 possible sky positions to use as objects from a possible 499. plFiberPlate : 14 possible sky positions to use as objects from a possible 498. plFiberPlate : 2 possible sky positions to use as objects from a possible 497. plFiberPlate : 9 possible sky positions to use as objects from a possible 496. plFiberPlate : 11 possible sky positions to use as objects from a possible 495. plFiberPlate : 13 possible sky positions to use as objects from a possible 494. plFiberPlate : 7 possible sky positions to use as objects from a possible 493. plFiberPlate : 63 possible sky positions to use as objects from a possible 492. plFiberPlate : 36 possible sky positions to use as objects from a possible 491. plFiberPlate : 21 possible sky positions to use as objects from a possible 490. plFiberPlate : 14 possible sky positions to use as objects from a possible 489. plFiberPlate : 7 possible sky positions to use as objects from a possible 488. plFiberPlate : 7 possible sky positions to use as objects from a possible 487. plFiberPlate : 17 possible sky positions to use as objects from a possible 486. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1286.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1287.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1287.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1288.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 129 2 7 97 3 5 60 4 5 97 5 3 139 6 5 79 7 4 39 8 5 73 9 3 97 10 8 152 11 5 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3664 20 1 53 53 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 63 61 plFiberPlate : adding spectro-photo std with objId = 3664 20 4 57 37 plFiberPlate : adding spectro-photo std with objId = 3664 20 5 62 140 plFiberPlate : adding spectro-photo std with objId = 3664 20 5 54 121 plFiberPlate : adding spectro-photo std with objId = 3664 20 5 47 70 plFiberPlate : adding spectro-photo std with objId = 3664 20 6 61 113 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 466 6 plFiberPlate : 95 possible sky positions to use as objects from a possible 537. plFiberPlate : 65 possible sky positions to use as objects from a possible 536. plFiberPlate : 11 possible sky positions to use as objects from a possible 535. plFiberPlate : 17 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 33 possible sky positions to use as objects from a possible 532. plFiberPlate : 56 possible sky positions to use as objects from a possible 531. plFiberPlate : 83 possible sky positions to use as objects from a possible 530. plFiberPlate : 59 possible sky positions to use as objects from a possible 529. plFiberPlate : 37 possible sky positions to use as objects from a possible 528. plFiberPlate : 12 possible sky positions to use as objects from a possible 527. plFiberPlate : 18 possible sky positions to use as objects from a possible 526. plFiberPlate : 15 possible sky positions to use as objects from a possible 525. plFiberPlate : 6 possible sky positions to use as objects from a possible 524. plFiberPlate : 15 possible sky positions to use as objects from a possible 523. plFiberPlate : 20 possible sky positions to use as objects from a possible 522. plFiberPlate : 59 possible sky positions to use as objects from a possible 521. plFiberPlate : 31 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 10 possible sky positions to use as objects from a possible 518. plFiberPlate : 14 possible sky positions to use as objects from a possible 517. plFiberPlate : 5 possible sky positions to use as objects from a possible 516. plFiberPlate : 1 possible sky positions to use as objects from a possible 515. plFiberPlate : 2 possible sky positions to use as objects from a possible 514. plFiberPlate : 13 possible sky positions to use as objects from a possible 513. plFiberPlate : 58 possible sky positions to use as objects from a possible 512. plFiberPlate : 29 possible sky positions to use as objects from a possible 511. plFiberPlate : 22 possible sky positions to use as objects from a possible 510. plFiberPlate : 4 possible sky positions to use as objects from a possible 509. plFiberPlate : 7 possible sky positions to use as objects from a possible 508. plFiberPlate : 13 possible sky positions to use as objects from a possible 507. plFiberPlate : 5 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1287.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1288.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1288.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1289.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 119 2 5 88 3 6 54 4 8 83 5 5 134 6 3 96 7 2 55 8 2 76 9 3 101 10 9 145 11 5 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 487 17 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 486 12 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 490 114 plFiberPlate : adding spectro-photo std with objId = 3664 20 4 66 25 plFiberPlate : adding spectro-photo std with objId = 2964 20 6 484 92 plFiberPlate : adding spectro-photo std with objId = 3664 20 4 73 123 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 484 27 plFiberPlate : adding spectro-photo std with objId = 3664 20 6 70 34 plFiberPlate : 106 possible sky positions to use as objects from a possible 520. plFiberPlate : 51 possible sky positions to use as objects from a possible 519. plFiberPlate : 39 possible sky positions to use as objects from a possible 518. plFiberPlate : 30 possible sky positions to use as objects from a possible 517. plFiberPlate : 19 possible sky positions to use as objects from a possible 516. plFiberPlate : 20 possible sky positions to use as objects from a possible 515. plFiberPlate : 57 possible sky positions to use as objects from a possible 514. plFiberPlate : 65 possible sky positions to use as objects from a possible 513. plFiberPlate : 47 possible sky positions to use as objects from a possible 512. plFiberPlate : 33 possible sky positions to use as objects from a possible 511. plFiberPlate : 21 possible sky positions to use as objects from a possible 510. plFiberPlate : 16 possible sky positions to use as objects from a possible 509. plFiberPlate : 11 possible sky positions to use as objects from a possible 508. plFiberPlate : 7 possible sky positions to use as objects from a possible 507. plFiberPlate : 13 possible sky positions to use as objects from a possible 506. plFiberPlate : 18 possible sky positions to use as objects from a possible 505. plFiberPlate : 55 possible sky positions to use as objects from a possible 504. plFiberPlate : 27 possible sky positions to use as objects from a possible 503. plFiberPlate : 7 possible sky positions to use as objects from a possible 502. plFiberPlate : 6 possible sky positions to use as objects from a possible 501. plFiberPlate : 10 possible sky positions to use as objects from a possible 500. plFiberPlate : 5 possible sky positions to use as objects from a possible 499. plFiberPlate : 5 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 14 possible sky positions to use as objects from a possible 496. plFiberPlate : 59 possible sky positions to use as objects from a possible 495. plFiberPlate : 48 possible sky positions to use as objects from a possible 494. plFiberPlate : 36 possible sky positions to use as objects from a possible 493. plFiberPlate : 22 possible sky positions to use as objects from a possible 492. plFiberPlate : 8 possible sky positions to use as objects from a possible 491. plFiberPlate : 22 possible sky positions to use as objects from a possible 490. plFiberPlate : 17 possible sky positions to use as objects from a possible 489. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1288.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1289.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1289.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1290.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 123 2 8 79 3 2 46 4 3 83 5 12 124 6 7 92 7 3 56 8 3 76 9 4 105 10 10 134 11 9 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 508 32 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 508 68 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 512 43 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 500 31 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 509 116 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 88 25 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 507 29 plFiberPlate : adding spectro-photo std with objId = 3664 20 6 86 39 plFiberPlate : 73 possible sky positions to use as objects from a possible 506. plFiberPlate : 33 possible sky positions to use as objects from a possible 505. plFiberPlate : 30 possible sky positions to use as objects from a possible 504. plFiberPlate : 21 possible sky positions to use as objects from a possible 503. plFiberPlate : 13 possible sky positions to use as objects from a possible 502. plFiberPlate : 22 possible sky positions to use as objects from a possible 501. plFiberPlate : 40 possible sky positions to use as objects from a possible 500. plFiberPlate : 61 possible sky positions to use as objects from a possible 499. plFiberPlate : 48 possible sky positions to use as objects from a possible 498. plFiberPlate : 33 possible sky positions to use as objects from a possible 497. plFiberPlate : 13 possible sky positions to use as objects from a possible 496. plFiberPlate : 10 possible sky positions to use as objects from a possible 495. plFiberPlate : 25 possible sky positions to use as objects from a possible 494. plFiberPlate : 14 possible sky positions to use as objects from a possible 493. plFiberPlate : 12 possible sky positions to use as objects from a possible 492. plFiberPlate : 19 possible sky positions to use as objects from a possible 491. plFiberPlate : 65 possible sky positions to use as objects from a possible 490. plFiberPlate : 29 possible sky positions to use as objects from a possible 489. plFiberPlate : 15 possible sky positions to use as objects from a possible 488. plFiberPlate : 13 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 9 possible sky positions to use as objects from a possible 485. plFiberPlate : 12 possible sky positions to use as objects from a possible 484. plFiberPlate : 7 possible sky positions to use as objects from a possible 483. plFiberPlate : 9 possible sky positions to use as objects from a possible 482. plFiberPlate : 50 possible sky positions to use as objects from a possible 481. plFiberPlate : 61 possible sky positions to use as objects from a possible 480. plFiberPlate : 30 possible sky positions to use as objects from a possible 479. plFiberPlate : 15 possible sky positions to use as objects from a possible 478. plFiberPlate : 22 possible sky positions to use as objects from a possible 477. plFiberPlate : 7 possible sky positions to use as objects from a possible 476. plFiberPlate : 14 possible sky positions to use as objects from a possible 475. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1289.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1290.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1290.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1291.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 118 2 9 85 3 3 51 4 5 78 5 8 120 6 3 85 7 2 41 8 9 73 9 4 95 10 13 141 11 15 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3664 20 4 97 38 plFiberPlate : adding spectro-photo std with objId = 3664 20 2 102 8 plFiberPlate : adding spectro-photo std with objId = 3664 20 6 94 71 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 512 43 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 529 99 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 527 69 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 96 65 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 516 77 plFiberPlate : 75 possible sky positions to use as objects from a possible 492. plFiberPlate : 41 possible sky positions to use as objects from a possible 491. plFiberPlate : 27 possible sky positions to use as objects from a possible 490. plFiberPlate : 14 possible sky positions to use as objects from a possible 489. plFiberPlate : 24 possible sky positions to use as objects from a possible 488. plFiberPlate : 35 possible sky positions to use as objects from a possible 487. plFiberPlate : 36 possible sky positions to use as objects from a possible 486. plFiberPlate : 69 possible sky positions to use as objects from a possible 485. plFiberPlate : 52 possible sky positions to use as objects from a possible 484. plFiberPlate : 38 possible sky positions to use as objects from a possible 483. plFiberPlate : 21 possible sky positions to use as objects from a possible 482. plFiberPlate : 13 possible sky positions to use as objects from a possible 481. plFiberPlate : 16 possible sky positions to use as objects from a possible 480. plFiberPlate : 18 possible sky positions to use as objects from a possible 479. plFiberPlate : 13 possible sky positions to use as objects from a possible 478. plFiberPlate : 8 possible sky positions to use as objects from a possible 477. plFiberPlate : 57 possible sky positions to use as objects from a possible 476. plFiberPlate : 25 possible sky positions to use as objects from a possible 475. plFiberPlate : 21 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 9 possible sky positions to use as objects from a possible 472. plFiberPlate : 11 possible sky positions to use as objects from a possible 471. plFiberPlate : 16 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 17 possible sky positions to use as objects from a possible 468. plFiberPlate : 72 possible sky positions to use as objects from a possible 467. plFiberPlate : 56 possible sky positions to use as objects from a possible 466. plFiberPlate : 32 possible sky positions to use as objects from a possible 465. plFiberPlate : 22 possible sky positions to use as objects from a possible 464. plFiberPlate : 6 possible sky positions to use as objects from a possible 463. plFiberPlate : 8 possible sky positions to use as objects from a possible 462. plFiberPlate : 8 possible sky positions to use as objects from a possible 461. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1290.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1291.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1291.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1292.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 111 2 10 85 3 6 29 4 8 59 5 13 113 6 4 85 7 5 38 8 3 63 9 5 95 10 17 121 11 16 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 534 13 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 534 70 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 532 54 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 540 64 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 112 67 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 531 101 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 526 44 plFiberPlate : adding spectro-photo std with objId = 3664 20 4 115 51 plFiberPlate : 56 possible sky positions to use as objects from a possible 447. plFiberPlate : 35 possible sky positions to use as objects from a possible 446. plFiberPlate : 18 possible sky positions to use as objects from a possible 445. plFiberPlate : 21 possible sky positions to use as objects from a possible 444. plFiberPlate : 30 possible sky positions to use as objects from a possible 443. plFiberPlate : 30 possible sky positions to use as objects from a possible 442. plFiberPlate : 49 possible sky positions to use as objects from a possible 441. plFiberPlate : 42 possible sky positions to use as objects from a possible 440. plFiberPlate : 34 possible sky positions to use as objects from a possible 439. plFiberPlate : 22 possible sky positions to use as objects from a possible 438. plFiberPlate : 16 possible sky positions to use as objects from a possible 437. plFiberPlate : 7 possible sky positions to use as objects from a possible 436. plFiberPlate : 11 possible sky positions to use as objects from a possible 435. plFiberPlate : 8 possible sky positions to use as objects from a possible 434. plFiberPlate : 14 possible sky positions to use as objects from a possible 433. plFiberPlate : 10 possible sky positions to use as objects from a possible 432. plFiberPlate : 49 possible sky positions to use as objects from a possible 431. plFiberPlate : 33 possible sky positions to use as objects from a possible 430. plFiberPlate : 17 possible sky positions to use as objects from a possible 429. plFiberPlate : 5 possible sky positions to use as objects from a possible 428. plFiberPlate : 7 possible sky positions to use as objects from a possible 427. plFiberPlate : 5 possible sky positions to use as objects from a possible 426. plFiberPlate : 3 possible sky positions to use as objects from a possible 425. plFiberPlate : 16 possible sky positions to use as objects from a possible 424. plFiberPlate : 9 possible sky positions to use as objects from a possible 423. plFiberPlate : 62 possible sky positions to use as objects from a possible 422. plFiberPlate : 43 possible sky positions to use as objects from a possible 421. plFiberPlate : 34 possible sky positions to use as objects from a possible 420. plFiberPlate : 19 possible sky positions to use as objects from a possible 419. plFiberPlate : 14 possible sky positions to use as objects from a possible 418. plFiberPlate : 6 possible sky positions to use as objects from a possible 417. plFiberPlate : 7 possible sky positions to use as objects from a possible 416. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1291.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1292.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1292.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1293.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 123 2 14 91 3 6 53 4 6 78 5 15 109 6 7 85 7 4 34 8 7 62 9 11 89 10 16 130 11 15 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 551 47 plFiberPlate : adding spectro-photo std with objId = 2964 20 2 550 83 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 136 128 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 552 74 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 550 4 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 550 25 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 559 65 plFiberPlate : adding spectro-photo std with objId = 3664 20 4 129 8 plFiberPlate : 74 possible sky positions to use as objects from a possible 470. plFiberPlate : 41 possible sky positions to use as objects from a possible 469. plFiberPlate : 27 possible sky positions to use as objects from a possible 468. plFiberPlate : 15 possible sky positions to use as objects from a possible 467. plFiberPlate : 19 possible sky positions to use as objects from a possible 466. plFiberPlate : 53 possible sky positions to use as objects from a possible 465. plFiberPlate : 38 possible sky positions to use as objects from a possible 464. plFiberPlate : 59 possible sky positions to use as objects from a possible 463. plFiberPlate : 47 possible sky positions to use as objects from a possible 462. plFiberPlate : 26 possible sky positions to use as objects from a possible 461. plFiberPlate : 12 possible sky positions to use as objects from a possible 460. plFiberPlate : 9 possible sky positions to use as objects from a possible 459. plFiberPlate : 9 possible sky positions to use as objects from a possible 458. plFiberPlate : 15 possible sky positions to use as objects from a possible 457. plFiberPlate : 8 possible sky positions to use as objects from a possible 456. plFiberPlate : 20 possible sky positions to use as objects from a possible 455. plFiberPlate : 60 possible sky positions to use as objects from a possible 454. plFiberPlate : 33 possible sky positions to use as objects from a possible 453. plFiberPlate : 22 possible sky positions to use as objects from a possible 452. plFiberPlate : 20 possible sky positions to use as objects from a possible 451. plFiberPlate : 13 possible sky positions to use as objects from a possible 450. plFiberPlate : 8 possible sky positions to use as objects from a possible 449. plFiberPlate : 20 possible sky positions to use as objects from a possible 448. plFiberPlate : 25 possible sky positions to use as objects from a possible 447. plFiberPlate : 15 possible sky positions to use as objects from a possible 446. plFiberPlate : 54 possible sky positions to use as objects from a possible 445. plFiberPlate : 50 possible sky positions to use as objects from a possible 444. plFiberPlate : 30 possible sky positions to use as objects from a possible 443. plFiberPlate : 30 possible sky positions to use as objects from a possible 442. plFiberPlate : 20 possible sky positions to use as objects from a possible 441. plFiberPlate : 18 possible sky positions to use as objects from a possible 440. plFiberPlate : 12 possible sky positions to use as objects from a possible 439. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1292.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1293.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1293.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.03.1/plPlugMapP-1294.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 89 2 8 58 3 4 29 4 6 52 5 20 118 6 10 85 7 4 45 8 5 63 9 12 85 10 14 106 11 10 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3664 20 3 146 132 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 569 34 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 570 51 plFiberPlate : adding spectro-photo std with objId = 2964 20 1 569 15 plFiberPlate : adding spectro-photo std with objId = 3664 20 6 145 94 plFiberPlate : adding spectro-photo std with objId = 2964 20 5 559 65 plFiberPlate : adding spectro-photo std with objId = 2964 20 3 564 25 plFiberPlate : adding spectro-photo std with objId = 2964 20 4 567 102 plFiberPlate : 49 possible sky positions to use as objects from a possible 402. plFiberPlate : 19 possible sky positions to use as objects from a possible 401. plFiberPlate : 12 possible sky positions to use as objects from a possible 400. plFiberPlate : 10 possible sky positions to use as objects from a possible 399. plFiberPlate : 16 possible sky positions to use as objects from a possible 398. plFiberPlate : 24 possible sky positions to use as objects from a possible 397. plFiberPlate : 45 possible sky positions to use as objects from a possible 396. plFiberPlate : 31 possible sky positions to use as objects from a possible 395. plFiberPlate : 27 possible sky positions to use as objects from a possible 394. plFiberPlate : 13 possible sky positions to use as objects from a possible 393. plFiberPlate : 8 possible sky positions to use as objects from a possible 392. plFiberPlate : 1 possible sky positions to use as objects from a possible 391. plFiberPlate : 3 possible sky positions to use as objects from a possible 390. plFiberPlate : 7 possible sky positions to use as objects from a possible 389. plFiberPlate : 13 possible sky positions to use as objects from a possible 388. plFiberPlate : 20 possible sky positions to use as objects from a possible 387. plFiberPlate : 39 possible sky positions to use as objects from a possible 386. plFiberPlate : 40 possible sky positions to use as objects from a possible 385. plFiberPlate : 28 possible sky positions to use as objects from a possible 384. plFiberPlate : 12 possible sky positions to use as objects from a possible 383. plFiberPlate : 5 possible sky positions to use as objects from a possible 382. plFiberPlate : 3 possible sky positions to use as objects from a possible 381. plFiberPlate : 10 possible sky positions to use as objects from a possible 380. plFiberPlate : 7 possible sky positions to use as objects from a possible 379. plFiberPlate : 18 possible sky positions to use as objects from a possible 378. plFiberPlate : 59 possible sky positions to use as objects from a possible 377. plFiberPlate : 61 possible sky positions to use as objects from a possible 376. plFiberPlate : 39 possible sky positions to use as objects from a possible 375. plFiberPlate : 19 possible sky positions to use as objects from a possible 374. plFiberPlate : 16 possible sky positions to use as objects from a possible 373. plFiberPlate : 14 possible sky positions to use as objects from a possible 372. plFiberPlate : 17 possible sky positions to use as objects from a possible 371. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1293.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1294.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.03.1/plOverlay-1294.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Mar 3 17:50:37 CST 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 17 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1278.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1278.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1278.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1279.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1279.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1279.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1280.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1968,3.8372) and (12.35,2.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1280.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1280.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1281.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.6246,-10.2374) and (6.09,-11.26) plMakeFanucCodes : fixed path between (9.5460,8.3703) and (10.79,6.46) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1281.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1281.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1282.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1282.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1282.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1283.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1283.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1283.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1284.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.3225,10.3725) and (-6.04,11.04) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1284.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1284.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1285.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3987,5.7284) and (11.72,4.69) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1285.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1285.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1286.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1286.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1286.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1287.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1287.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1287.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1288.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.5698,9.4098) and (-7.12,10.48) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1288.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1288.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1289.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0116,-4.4130) and (-12.20,-3.23) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1289.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1289.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1290.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.2224,-9.6599) and (6.89,-10.70) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1290.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1290.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1291.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.7257,11.8587) and (-4.39,12.02) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1291.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1291.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1292.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.2698,6.0345) and (-12.08,3.50) plMakeFanucCodes : fixed path between (10.7412,-6.8049) and (11.58,-4.58) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1292.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1292.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1293.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1293.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1293.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1294.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.7783,6.7793) and (-11.16,6.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1294.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.03.1/plFanuc-1294.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Mar 3 17:51:28 CST 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e964e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 17 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1278 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1279 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1280 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1281 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1282 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1283 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1284 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1285 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1286 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1287 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1288 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1289 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1290 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1291 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1292 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1293 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1294 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Mar 3 17:51:57 CST 2003 Begin running plateEnder dr2003.03.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_16/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: plateEnder dr2003.03.1 -morePipes 1 failed. PS: Read file for stderr output of this job.