Sender: LSF System Subject: Job 43043: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sun Apr 24 19:38:59 2005 Results reported at Sun Apr 24 19:44:05 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.04.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 117.22 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 6 The output (if any) follows: --------------------------------------------------------------- Sun Apr 24 19:39:48 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sun Apr 24 19:41:14 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_221/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Sun Apr 24 19:41:15 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_221/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Sun Apr 24 19:41:19 CDT 2005 Begin running plate --------------------------------------------------------------- Sun Apr 24 19:41:20 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x949d234 makePlates : beginning loop over plObs chain; makePlates : making 11 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8046.par makePlates : plateInfo struct for plate 2174 : (h4).mjd 53519 (h4).raCen 250.007 (h4).decCen 36.197 (h4).haCen 34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.007 36.197 250.007 37.697 plMakePlateFromTile : mjd of obs : 53519.807874 Observed HA/dec of plate center, fiducial point (deg) : 33.998 36.185 33.998 37.684 The rotation angle of the fid. point is -86.922959 plMakePlateFromTile : beginning loop over 1675 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8047.par makePlates : plateInfo struct for plate 2175 : (h4).mjd 53519 (h4).raCen 241.40545 (h4).decCen 5.57236 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.405 5.572 241.405 7.072 plMakePlateFromTile : mjd of obs : 53519.767461 Observed HA/dec of plate center, fiducial point (deg) : 27.998 5.565 27.998 7.065 The rotation angle of the fid. point is -40.238578 plMakePlateFromTile : beginning loop over 1642 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8048.par makePlates : plateInfo struct for plate 2176 : (h4).mjd 53519 (h4).raCen 242.50726 (h4).decCen 52.36524 (h4).haCen 42 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.507 52.365 242.507 53.865 plMakePlateFromTile : mjd of obs : 53519.809252 Observed HA/dec of plate center, fiducial point (deg) : 41.998 52.346 41.999 53.846 The rotation angle of the fid. point is -106.264308 plMakePlateFromTile : beginning loop over 1660 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8049.par makePlates : plateInfo struct for plate 2177 : (h4).mjd 53519 (h4).raCen 243.76748 (h4).decCen 16.66577 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.767 16.666 243.767 18.166 plMakePlateFromTile : mjd of obs : 53519.768448 Observed HA/dec of plate center, fiducial point (deg) : 25.998 16.656 25.998 18.155 The rotation angle of the fid. point is -50.681913 plMakePlateFromTile : beginning loop over 1691 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8050.par makePlates : plateInfo struct for plate 2178 : (h4).mjd 53519 (h4).raCen 242.3285 (h4).decCen 4.0651 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.329 4.065 242.329 5.565 plMakePlateFromTile : mjd of obs : 53519.767249 Observed HA/dec of plate center, fiducial point (deg) : 26.998 4.059 26.998 5.558 The rotation angle of the fid. point is -38.112990 plMakePlateFromTile : beginning loop over 1660 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8051.par makePlates : plateInfo struct for plate 2179 : (h4).mjd 53519 (h4).raCen 311.15734 (h4).decCen 76.18196 (h4).haCen -11 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 311.157 76.182 311.157 77.682 plMakePlateFromTile : mjd of obs : 53519.852345 Observed HA/dec of plate center, fiducial point (deg) : -11.001 76.180 -10.988 77.679 The rotation angle of the fid. point is 166.467076 plMakePlateFromTile : beginning loop over 2009 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8052.par makePlates : plateInfo struct for plate 2180 : (h4).mjd 53519 (h4).raCen 253.11673 (h4).decCen 23.95015 (h4).haCen 31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 253.117 23.950 253.117 25.450 plMakePlateFromTile : mjd of obs : 53519.808191 Observed HA/dec of plate center, fiducial point (deg) : 30.998 23.942 30.998 25.442 The rotation angle of the fid. point is -64.976651 plMakePlateFromTile : beginning loop over 1680 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8053.par makePlates : plateInfo struct for plate 2181 : (h4).mjd 53519 (h4).raCen 254.9235 (h4).decCen 39.64983 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 254.924 39.650 254.924 41.150 plMakePlateFromTile : mjd of obs : 53519.810402 Observed HA/dec of plate center, fiducial point (deg) : 29.998 39.638 29.999 41.138 The rotation angle of the fid. point is -96.481113 plMakePlateFromTile : beginning loop over 1658 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8054.par makePlates : plateInfo struct for plate 2182 : (h4).mjd 53519 (h4).raCen 261.18128 (h4).decCen 27.01436 (h4).haCen 23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 261.181 27.014 261.181 28.514 plMakePlateFromTile : mjd of obs : 53519.808356 Observed HA/dec of plate center, fiducial point (deg) : 22.998 27.009 22.998 28.508 The rotation angle of the fid. point is -68.299536 plMakePlateFromTile : beginning loop over 1577 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8055.par makePlates : plateInfo struct for plate 2183 : (h4).mjd 53519 (h4).raCen 266.4694 (h4).decCen 25.43275 (h4).haCen 33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 266.469 25.433 266.469 26.933 plMakePlateFromTile : mjd of obs : 53519.850717 Observed HA/dec of plate center, fiducial point (deg) : 32.998 25.431 32.998 26.930 The rotation angle of the fid. point is -67.903068 plMakePlateFromTile : beginning loop over 1429 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8056.par makePlates : plateInfo struct for plate 2184 : (h4).mjd 53519 (h4).raCen 271.61278 (h4).decCen 23.66702 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 271.613 23.667 271.613 25.167 plMakePlateFromTile : mjd of obs : 53519.851112 Observed HA/dec of plate center, fiducial point (deg) : 27.998 23.668 27.998 25.167 The rotation angle of the fid. point is -63.401908 plMakePlateFromTile : beginning loop over 1509 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sun Apr 24 19:41:55 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 11 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2174.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 168 2 18 132 3 20 104 4 27 127 5 28 182 6 12 142 7 11 113 8 13 123 9 9 141 10 38 229 11 17 164 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3226 40 1 127 47 plFiberPlate : adding spectro-photo std with objId = 3226 40 1 126 36 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 123 122 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 122 13 plFiberPlate : adding spectro-photo std with objId = 3226 40 2 122 25 plFiberPlate : adding spectro-photo std with objId = 3226 40 3 120 84 plFiberPlate : adding spectro-photo std with objId = 3226 40 2 120 30 plFiberPlate : adding spectro-photo std with objId = 3226 40 5 118 160 plFiberPlate : 139 possible sky positions to use as objects from a possible 791. plFiberPlate : 114 possible sky positions to use as objects from a possible 790. plFiberPlate : 64 possible sky positions to use as objects from a possible 789. plFiberPlate : 55 possible sky positions to use as objects from a possible 788. plFiberPlate : 34 possible sky positions to use as objects from a possible 787. plFiberPlate : 46 possible sky positions to use as objects from a possible 786. plFiberPlate : 82 possible sky positions to use as objects from a possible 785. plFiberPlate : 94 possible sky positions to use as objects from a possible 784. plFiberPlate : 54 possible sky positions to use as objects from a possible 783. plFiberPlate : 24 possible sky positions to use as objects from a possible 782. plFiberPlate : 5 possible sky positions to use as objects from a possible 781. plFiberPlate : 4 possible sky positions to use as objects from a possible 780. plFiberPlate : 0 possible sky positions to use as objects from a possible 779. plFiberPlate: No sky found for bundle at 98.944 24.215, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 779. plFiberPlate : 5 possible sky positions to use as objects from a possible 778. plFiberPlate : 22 possible sky positions to use as objects from a possible 777. plFiberPlate : 34 possible sky positions to use as objects from a possible 776. plFiberPlate : 47 possible sky positions to use as objects from a possible 775. plFiberPlate : 0 possible sky positions to use as objects from a possible 774. plFiberPlate: No sky found for bundle at 18.277 81.432, increase box by 10 percent. plFiberPlate : 3 possible sky positions to use as objects from a possible 774. plFiberPlate : 0 possible sky positions to use as objects from a possible 773. plFiberPlate: No sky found for bundle at 47.531 83.437, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 773. plFiberPlate: No sky found for bundle at 47.531 83.437, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 773. plFiberPlate: No sky found for bundle at 47.531 83.437, increase box by 30 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 773. plFiberPlate : 0 possible sky positions to use as objects from a possible 772. plFiberPlate: No sky found for bundle at 58.208 78.290, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 772. plFiberPlate: No sky found for bundle at 58.208 78.290, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 772. plFiberPlate: No sky found for bundle at 58.208 78.290, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 772. plFiberPlate: No sky found for bundle at 58.208 78.290, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 772. plFiberPlate: No sky found for bundle at 58.208 78.290, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 772. plFiberPlate: No sky found for bundle at 58.208 78.290, increase box by 60 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 772. plFiberPlate : 0 possible sky positions to use as objects from a possible 771. plFiberPlate: No sky found for bundle at 70.633 73.829, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 771. plFiberPlate: No sky found for bundle at 70.633 73.829, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 771. plFiberPlate: No sky found for bundle at 70.633 73.829, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 771. plFiberPlate: No sky found for bundle at 70.633 73.829, increase box by 40 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 771. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 770. plFiberPlate: No sky found for bundle at 85.931 75.554, increase box by 110 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 770. plFiberPlate : 0 possible sky positions to use as objects from a possible 769. plFiberPlate: No sky found for bundle at 100.321 72.702, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 769. plFiberPlate: No sky found for bundle at 100.321 72.702, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 769. plFiberPlate: No sky found for bundle at 100.321 72.702, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 769. plFiberPlate: No sky found for bundle at 100.321 72.702, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 769. plFiberPlate: No sky found for bundle at 100.321 72.702, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 769. plFiberPlate: No sky found for bundle at 100.321 72.702, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 769. plFiberPlate: No sky found for bundle at 100.321 72.702, increase box by 70 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 769. plFiberPlate : 2 possible sky positions to use as objects from a possible 768. plFiberPlate : 22 possible sky positions to use as objects from a possible 767. plFiberPlate : 104 possible sky positions to use as objects from a possible 766. plFiberPlate : 58 possible sky positions to use as objects from a possible 765. plFiberPlate : 42 possible sky positions to use as objects from a possible 764. plFiberPlate : 19 possible sky positions to use as objects from a possible 763. plFiberPlate : 18 possible sky positions to use as objects from a possible 762. plFiberPlate : 22 possible sky positions to use as objects from a possible 761. plFiberPlate : 19 possible sky positions to use as objects from a possible 760. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 769 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2174.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2174.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2175.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 163 2 23 115 3 22 95 4 30 132 5 14 169 6 6 126 7 6 109 8 4 146 9 6 166 10 40 205 11 21 164 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 302 225 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 301 18 plFiberPlate : adding spectro-photo std with objId = 3909 40 6 300 165 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 300 32 plFiberPlate : adding spectro-photo std with objId = 3909 40 1 300 129 plFiberPlate : adding spectro-photo std with objId = 3909 40 4 299 46 plFiberPlate : adding spectro-photo std with objId = 3909 40 2 298 149 plFiberPlate : adding spectro-photo std with objId = 3909 40 3 297 256 plFiberPlate : 133 possible sky positions to use as objects from a possible 772. plFiberPlate : 91 possible sky positions to use as objects from a possible 771. plFiberPlate : 45 possible sky positions to use as objects from a possible 770. plFiberPlate : 40 possible sky positions to use as objects from a possible 769. plFiberPlate : 31 possible sky positions to use as objects from a possible 768. plFiberPlate : 49 possible sky positions to use as objects from a possible 767. plFiberPlate : 45 possible sky positions to use as objects from a possible 766. plFiberPlate : 107 possible sky positions to use as objects from a possible 765. plFiberPlate : 82 possible sky positions to use as objects from a possible 764. plFiberPlate : 67 possible sky positions to use as objects from a possible 763. plFiberPlate : 49 possible sky positions to use as objects from a possible 762. plFiberPlate : 23 possible sky positions to use as objects from a possible 761. plFiberPlate : 28 possible sky positions to use as objects from a possible 760. plFiberPlate : 25 possible sky positions to use as objects from a possible 759. plFiberPlate : 28 possible sky positions to use as objects from a possible 758. plFiberPlate : 14 possible sky positions to use as objects from a possible 757. plFiberPlate : 95 possible sky positions to use as objects from a possible 756. plFiberPlate : 87 possible sky positions to use as objects from a possible 755. plFiberPlate : 56 possible sky positions to use as objects from a possible 754. plFiberPlate : 43 possible sky positions to use as objects from a possible 753. plFiberPlate : 18 possible sky positions to use as objects from a possible 752. plFiberPlate : 18 possible sky positions to use as objects from a possible 751. plFiberPlate : 20 possible sky positions to use as objects from a possible 750. plFiberPlate : 31 possible sky positions to use as objects from a possible 749. plFiberPlate : 20 possible sky positions to use as objects from a possible 748. plFiberPlate : 69 possible sky positions to use as objects from a possible 747. plFiberPlate : 64 possible sky positions to use as objects from a possible 746. plFiberPlate : 39 possible sky positions to use as objects from a possible 745. plFiberPlate : 31 possible sky positions to use as objects from a possible 744. plFiberPlate : 16 possible sky positions to use as objects from a possible 743. plFiberPlate : 20 possible sky positions to use as objects from a possible 742. plFiberPlate : 31 possible sky positions to use as objects from a possible 741. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 739 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2174.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2175.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2175.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2176.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 177 2 19 141 3 9 120 4 13 134 5 19 177 6 11 142 7 11 117 8 23 129 9 13 168 10 29 238 11 29 165 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2206 40 3 153 121 plFiberPlate : adding spectro-photo std with objId = 2206 40 2 152 55 plFiberPlate : adding spectro-photo std with objId = 2206 40 4 147 104 plFiberPlate : adding spectro-photo std with objId = 2206 40 6 145 66 plFiberPlate : adding spectro-photo std with objId = 2206 40 2 145 76 plFiberPlate : adding spectro-photo std with objId = 2206 40 6 142 69 plFiberPlate : adding spectro-photo std with objId = 2206 40 3 142 4 plFiberPlate : adding spectro-photo std with objId = 2206 40 2 142 11 plFiberPlate : 161 possible sky positions to use as objects from a possible 829. plFiberPlate : 95 possible sky positions to use as objects from a possible 828. plFiberPlate : 39 possible sky positions to use as objects from a possible 827. plFiberPlate : 37 possible sky positions to use as objects from a possible 826. plFiberPlate : 45 possible sky positions to use as objects from a possible 825. plFiberPlate : 46 possible sky positions to use as objects from a possible 824. plFiberPlate : 52 possible sky positions to use as objects from a possible 823. plFiberPlate : 102 possible sky positions to use as objects from a possible 822. plFiberPlate : 89 possible sky positions to use as objects from a possible 821. plFiberPlate : 63 possible sky positions to use as objects from a possible 820. plFiberPlate : 48 possible sky positions to use as objects from a possible 819. plFiberPlate : 21 possible sky positions to use as objects from a possible 818. plFiberPlate : 21 possible sky positions to use as objects from a possible 817. plFiberPlate : 31 possible sky positions to use as objects from a possible 816. plFiberPlate : 39 possible sky positions to use as objects from a possible 815. plFiberPlate : 14 possible sky positions to use as objects from a possible 814. plFiberPlate : 127 possible sky positions to use as objects from a possible 813. plFiberPlate : 94 possible sky positions to use as objects from a possible 812. plFiberPlate : 76 possible sky positions to use as objects from a possible 811. plFiberPlate : 55 possible sky positions to use as objects from a possible 810. plFiberPlate : 30 possible sky positions to use as objects from a possible 809. plFiberPlate : 17 possible sky positions to use as objects from a possible 808. plFiberPlate : 22 possible sky positions to use as objects from a possible 807. plFiberPlate : 30 possible sky positions to use as objects from a possible 806. plFiberPlate : 22 possible sky positions to use as objects from a possible 805. plFiberPlate : 68 possible sky positions to use as objects from a possible 804. plFiberPlate : 51 possible sky positions to use as objects from a possible 803. plFiberPlate : 31 possible sky positions to use as objects from a possible 802. plFiberPlate : 23 possible sky positions to use as objects from a possible 801. plFiberPlate : 13 possible sky positions to use as objects from a possible 800. plFiberPlate : 13 possible sky positions to use as objects from a possible 799. plFiberPlate : 25 possible sky positions to use as objects from a possible 798. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 768 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2175.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2176.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2176.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2177.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 163 2 21 130 3 23 99 4 32 134 5 15 182 6 9 136 7 19 89 8 21 145 9 21 168 10 33 225 11 23 155 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 392 33 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 392 74 plFiberPlate : adding spectro-photo std with objId = 4649 40 2 389 53 plFiberPlate : adding spectro-photo std with objId = 4649 40 1 389 15 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 388 68 plFiberPlate : adding spectro-photo std with objId = 4649 40 6 387 64 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 387 128 plFiberPlate : adding spectro-photo std with objId = 4649 40 4 387 93 plFiberPlate : 148 possible sky positions to use as objects from a possible 801. plFiberPlate : 81 possible sky positions to use as objects from a possible 800. plFiberPlate : 53 possible sky positions to use as objects from a possible 799. plFiberPlate : 37 possible sky positions to use as objects from a possible 798. plFiberPlate : 26 possible sky positions to use as objects from a possible 797. plFiberPlate : 30 possible sky positions to use as objects from a possible 796. plFiberPlate : 72 possible sky positions to use as objects from a possible 795. plFiberPlate : 110 possible sky positions to use as objects from a possible 794. plFiberPlate : 87 possible sky positions to use as objects from a possible 793. plFiberPlate : 69 possible sky positions to use as objects from a possible 792. plFiberPlate : 40 possible sky positions to use as objects from a possible 791. plFiberPlate : 14 possible sky positions to use as objects from a possible 790. plFiberPlate : 26 possible sky positions to use as objects from a possible 789. plFiberPlate : 22 possible sky positions to use as objects from a possible 788. plFiberPlate : 26 possible sky positions to use as objects from a possible 787. plFiberPlate : 19 possible sky positions to use as objects from a possible 786. plFiberPlate : 114 possible sky positions to use as objects from a possible 785. plFiberPlate : 87 possible sky positions to use as objects from a possible 784. plFiberPlate : 74 possible sky positions to use as objects from a possible 783. plFiberPlate : 56 possible sky positions to use as objects from a possible 782. plFiberPlate : 27 possible sky positions to use as objects from a possible 781. plFiberPlate : 24 possible sky positions to use as objects from a possible 780. plFiberPlate : 26 possible sky positions to use as objects from a possible 779. plFiberPlate : 29 possible sky positions to use as objects from a possible 778. plFiberPlate : 19 possible sky positions to use as objects from a possible 777. plFiberPlate : 95 possible sky positions to use as objects from a possible 776. plFiberPlate : 68 possible sky positions to use as objects from a possible 775. plFiberPlate : 49 possible sky positions to use as objects from a possible 774. plFiberPlate : 17 possible sky positions to use as objects from a possible 773. plFiberPlate : 13 possible sky positions to use as objects from a possible 772. plFiberPlate : 30 possible sky positions to use as objects from a possible 771. plFiberPlate : 15 possible sky positions to use as objects from a possible 770. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 741 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2176.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2177.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2177.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2178.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 145 2 25 102 3 24 92 4 37 134 5 20 177 6 15 120 7 17 98 8 9 140 9 15 162 10 42 193 11 32 137 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 235 110 plFiberPlate : adding spectro-photo std with objId = 2391 40 4 233 176 plFiberPlate : adding spectro-photo std with objId = 2391 40 1 233 52 plFiberPlate : adding spectro-photo std with objId = 2391 40 1 231 226 plFiberPlate : adding spectro-photo std with objId = 2391 40 6 229 105 plFiberPlate : adding spectro-photo std with objId = 2391 40 2 229 14 plFiberPlate : adding spectro-photo std with objId = 2391 40 5 227 195 plFiberPlate : adding spectro-photo std with objId = 2391 40 3 227 236 plFiberPlate : 141 possible sky positions to use as objects from a possible 742. plFiberPlate : 98 possible sky positions to use as objects from a possible 741. plFiberPlate : 52 possible sky positions to use as objects from a possible 740. plFiberPlate : 35 possible sky positions to use as objects from a possible 739. plFiberPlate : 44 possible sky positions to use as objects from a possible 738. plFiberPlate : 40 possible sky positions to use as objects from a possible 737. plFiberPlate : 50 possible sky positions to use as objects from a possible 736. plFiberPlate : 80 possible sky positions to use as objects from a possible 735. plFiberPlate : 71 possible sky positions to use as objects from a possible 734. plFiberPlate : 52 possible sky positions to use as objects from a possible 733. plFiberPlate : 31 possible sky positions to use as objects from a possible 732. plFiberPlate : 30 possible sky positions to use as objects from a possible 731. plFiberPlate : 24 possible sky positions to use as objects from a possible 730. plFiberPlate : 17 possible sky positions to use as objects from a possible 729. plFiberPlate : 17 possible sky positions to use as objects from a possible 728. plFiberPlate : 18 possible sky positions to use as objects from a possible 727. plFiberPlate : 110 possible sky positions to use as objects from a possible 726. plFiberPlate : 84 possible sky positions to use as objects from a possible 725. plFiberPlate : 56 possible sky positions to use as objects from a possible 724. plFiberPlate : 27 possible sky positions to use as objects from a possible 723. plFiberPlate : 17 possible sky positions to use as objects from a possible 722. plFiberPlate : 18 possible sky positions to use as objects from a possible 721. plFiberPlate : 15 possible sky positions to use as objects from a possible 720. plFiberPlate : 16 possible sky positions to use as objects from a possible 719. plFiberPlate : 19 possible sky positions to use as objects from a possible 718. plFiberPlate : 77 possible sky positions to use as objects from a possible 717. plFiberPlate : 60 possible sky positions to use as objects from a possible 716. plFiberPlate : 47 possible sky positions to use as objects from a possible 715. plFiberPlate : 28 possible sky positions to use as objects from a possible 714. plFiberPlate : 21 possible sky positions to use as objects from a possible 713. plFiberPlate : 25 possible sky positions to use as objects from a possible 712. plFiberPlate : 17 possible sky positions to use as objects from a possible 711. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 736 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2177.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2178.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2178.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2179.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 579 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 66 138 2 65 114 3 52 84 4 58 111 5 59 155 6 40 122 7 34 91 8 48 117 9 55 151 10 103 184 11 64 136 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 77 142 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 76 223 plFiberPlate : adding spectro-photo std with objId = 4144 40 1 71 56 plFiberPlate : adding spectro-photo std with objId = 4144 40 3 70 38 plFiberPlate : adding spectro-photo std with objId = 4144 40 6 69 366 plFiberPlate : adding spectro-photo std with objId = 4144 40 2 69 448 plFiberPlate : adding spectro-photo std with objId = 4144 40 2 69 224 plFiberPlate : adding spectro-photo std with objId = 4144 40 5 68 374 plFiberPlate : 120 possible sky positions to use as objects from a possible 688. plFiberPlate : 35 possible sky positions to use as objects from a possible 687. plFiberPlate : 41 possible sky positions to use as objects from a possible 686. plFiberPlate : 33 possible sky positions to use as objects from a possible 685. plFiberPlate : 22 possible sky positions to use as objects from a possible 684. plFiberPlate : 26 possible sky positions to use as objects from a possible 683. plFiberPlate : 25 possible sky positions to use as objects from a possible 682. plFiberPlate : 87 possible sky positions to use as objects from a possible 681. plFiberPlate : 51 possible sky positions to use as objects from a possible 680. plFiberPlate : 32 possible sky positions to use as objects from a possible 679. plFiberPlate : 23 possible sky positions to use as objects from a possible 678. plFiberPlate : 24 possible sky positions to use as objects from a possible 677. plFiberPlate : 8 possible sky positions to use as objects from a possible 676. plFiberPlate : 6 possible sky positions to use as objects from a possible 675. plFiberPlate : 11 possible sky positions to use as objects from a possible 674. plFiberPlate : 10 possible sky positions to use as objects from a possible 673. plFiberPlate : 82 possible sky positions to use as objects from a possible 672. plFiberPlate : 77 possible sky positions to use as objects from a possible 671. plFiberPlate : 51 possible sky positions to use as objects from a possible 670. plFiberPlate : 41 possible sky positions to use as objects from a possible 669. plFiberPlate : 20 possible sky positions to use as objects from a possible 668. plFiberPlate : 21 possible sky positions to use as objects from a possible 667. plFiberPlate : 7 possible sky positions to use as objects from a possible 666. plFiberPlate : 10 possible sky positions to use as objects from a possible 665. plFiberPlate : 18 possible sky positions to use as objects from a possible 664. plFiberPlate : 60 possible sky positions to use as objects from a possible 663. plFiberPlate : 45 possible sky positions to use as objects from a possible 662. plFiberPlate : 20 possible sky positions to use as objects from a possible 661. plFiberPlate : 13 possible sky positions to use as objects from a possible 660. plFiberPlate : 9 possible sky positions to use as objects from a possible 659. plFiberPlate : 9 possible sky positions to use as objects from a possible 658. plFiberPlate : 8 possible sky positions to use as objects from a possible 657. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 799 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2178.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2179.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2179.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2180.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 154 2 34 118 3 25 91 4 42 108 5 41 177 6 19 140 7 14 108 8 18 118 9 23 171 10 49 204 11 35 138 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 172 209 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 172 171 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 170 106 plFiberPlate : adding spectro-photo std with objId = 3958 40 1 168 235 plFiberPlate : adding spectro-photo std with objId = 3958 40 2 166 239 plFiberPlate : adding spectro-photo std with objId = 3958 40 2 166 26 plFiberPlate : adding spectro-photo std with objId = 3958 40 5 164 134 plFiberPlate : adding spectro-photo std with objId = 3958 40 3 164 36 plFiberPlate : 122 possible sky positions to use as objects from a possible 742. plFiberPlate : 83 possible sky positions to use as objects from a possible 741. plFiberPlate : 37 possible sky positions to use as objects from a possible 740. plFiberPlate : 41 possible sky positions to use as objects from a possible 739. plFiberPlate : 31 possible sky positions to use as objects from a possible 738. plFiberPlate : 31 possible sky positions to use as objects from a possible 737. plFiberPlate : 46 possible sky positions to use as objects from a possible 736. plFiberPlate : 82 possible sky positions to use as objects from a possible 735. plFiberPlate : 77 possible sky positions to use as objects from a possible 734. plFiberPlate : 57 possible sky positions to use as objects from a possible 733. plFiberPlate : 30 possible sky positions to use as objects from a possible 732. plFiberPlate : 11 possible sky positions to use as objects from a possible 731. plFiberPlate : 23 possible sky positions to use as objects from a possible 730. plFiberPlate : 10 possible sky positions to use as objects from a possible 729. plFiberPlate : 29 possible sky positions to use as objects from a possible 728. plFiberPlate : 29 possible sky positions to use as objects from a possible 727. plFiberPlate : 93 possible sky positions to use as objects from a possible 726. plFiberPlate : 81 possible sky positions to use as objects from a possible 725. plFiberPlate : 66 possible sky positions to use as objects from a possible 724. plFiberPlate : 42 possible sky positions to use as objects from a possible 723. plFiberPlate : 18 possible sky positions to use as objects from a possible 722. plFiberPlate : 31 possible sky positions to use as objects from a possible 721. plFiberPlate : 26 possible sky positions to use as objects from a possible 720. plFiberPlate : 20 possible sky positions to use as objects from a possible 719. plFiberPlate : 17 possible sky positions to use as objects from a possible 718. plFiberPlate : 80 possible sky positions to use as objects from a possible 717. plFiberPlate : 52 possible sky positions to use as objects from a possible 716. plFiberPlate : 47 possible sky positions to use as objects from a possible 715. plFiberPlate : 21 possible sky positions to use as objects from a possible 714. plFiberPlate : 24 possible sky positions to use as objects from a possible 713. plFiberPlate : 19 possible sky positions to use as objects from a possible 712. plFiberPlate : 12 possible sky positions to use as objects from a possible 711. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 749 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2179.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2180.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2180.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2181.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 170 2 21 129 3 27 110 4 29 124 5 31 164 6 23 129 7 17 118 8 17 127 9 16 159 10 41 218 11 18 162 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2207 40 2 111 160 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 110 248 plFiberPlate : adding spectro-photo std with objId = 2207 40 2 101 102 plFiberPlate : adding spectro-photo std with objId = 2207 40 1 101 123 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 99 98 plFiberPlate : adding spectro-photo std with objId = 2207 40 3 98 254 plFiberPlate : adding spectro-photo std with objId = 2207 40 4 96 29 plFiberPlate : adding spectro-photo std with objId = 2207 40 5 95 132 plFiberPlate : 148 possible sky positions to use as objects from a possible 785. plFiberPlate : 84 possible sky positions to use as objects from a possible 784. plFiberPlate : 35 possible sky positions to use as objects from a possible 783. plFiberPlate : 27 possible sky positions to use as objects from a possible 782. plFiberPlate : 41 possible sky positions to use as objects from a possible 781. plFiberPlate : 43 possible sky positions to use as objects from a possible 780. plFiberPlate : 70 possible sky positions to use as objects from a possible 779. plFiberPlate : 106 possible sky positions to use as objects from a possible 778. plFiberPlate : 70 possible sky positions to use as objects from a possible 777. plFiberPlate : 46 possible sky positions to use as objects from a possible 776. plFiberPlate : 34 possible sky positions to use as objects from a possible 775. plFiberPlate : 21 possible sky positions to use as objects from a possible 774. plFiberPlate : 22 possible sky positions to use as objects from a possible 773. plFiberPlate : 30 possible sky positions to use as objects from a possible 772. plFiberPlate : 20 possible sky positions to use as objects from a possible 771. plFiberPlate : 12 possible sky positions to use as objects from a possible 770. plFiberPlate : 98 possible sky positions to use as objects from a possible 769. plFiberPlate : 76 possible sky positions to use as objects from a possible 768. plFiberPlate : 52 possible sky positions to use as objects from a possible 767. plFiberPlate : 44 possible sky positions to use as objects from a possible 766. plFiberPlate : 36 possible sky positions to use as objects from a possible 765. plFiberPlate : 19 possible sky positions to use as objects from a possible 764. plFiberPlate : 28 possible sky positions to use as objects from a possible 763. plFiberPlate : 24 possible sky positions to use as objects from a possible 762. plFiberPlate : 14 possible sky positions to use as objects from a possible 761. plFiberPlate : 76 possible sky positions to use as objects from a possible 760. plFiberPlate : 50 possible sky positions to use as objects from a possible 759. plFiberPlate : 41 possible sky positions to use as objects from a possible 758. plFiberPlate : 23 possible sky positions to use as objects from a possible 757. plFiberPlate : 15 possible sky positions to use as objects from a possible 756. plFiberPlate : 21 possible sky positions to use as objects from a possible 755. plFiberPlate : 26 possible sky positions to use as objects from a possible 754. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 742 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2180.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2181.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2181.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2182.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 49 111 2 42 81 3 32 74 4 47 99 5 25 113 6 28 92 7 26 81 8 25 104 9 32 102 10 67 134 11 52 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 66 149 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 66 224 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 61 72 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 61 379 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 61 136 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 60 49 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 60 55 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 60 16 plFiberPlate : 97 possible sky positions to use as objects from a possible 537. plFiberPlate : 54 possible sky positions to use as objects from a possible 536. plFiberPlate : 25 possible sky positions to use as objects from a possible 535. plFiberPlate : 25 possible sky positions to use as objects from a possible 534. plFiberPlate : 39 possible sky positions to use as objects from a possible 533. plFiberPlate : 23 possible sky positions to use as objects from a possible 532. plFiberPlate : 27 possible sky positions to use as objects from a possible 531. plFiberPlate : 67 possible sky positions to use as objects from a possible 530. plFiberPlate : 58 possible sky positions to use as objects from a possible 529. plFiberPlate : 33 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : 10 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 17 possible sky positions to use as objects from a possible 523. plFiberPlate : 23 possible sky positions to use as objects from a possible 522. plFiberPlate : 63 possible sky positions to use as objects from a possible 521. plFiberPlate : 53 possible sky positions to use as objects from a possible 520. plFiberPlate : 37 possible sky positions to use as objects from a possible 519. plFiberPlate : 18 possible sky positions to use as objects from a possible 518. plFiberPlate : 6 possible sky positions to use as objects from a possible 517. plFiberPlate : 7 possible sky positions to use as objects from a possible 516. plFiberPlate : 16 possible sky positions to use as objects from a possible 515. plFiberPlate : 15 possible sky positions to use as objects from a possible 514. plFiberPlate : 21 possible sky positions to use as objects from a possible 513. plFiberPlate : 55 possible sky positions to use as objects from a possible 512. plFiberPlate : 54 possible sky positions to use as objects from a possible 511. plFiberPlate : 29 possible sky positions to use as objects from a possible 510. plFiberPlate : 20 possible sky positions to use as objects from a possible 509. plFiberPlate : 17 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 15 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 771 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2181.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2182.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2182.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2183.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 52 48 2 51 31 3 40 31 4 55 57 5 52 62 6 34 53 7 26 42 8 31 45 9 31 72 10 73 74 11 50 46 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 97 485 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 97 376 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 95 484 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 93 383 plFiberPlate : adding spectro-photo std with objId = 4832 40 5 93 132 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 93 275 plFiberPlate : adding spectro-photo std with objId = 4832 40 4 92 150 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 92 440 plFiberPlate : 54 possible sky positions to use as objects from a possible 276. plFiberPlate : 29 possible sky positions to use as objects from a possible 275. plFiberPlate : 13 possible sky positions to use as objects from a possible 274. plFiberPlate : 11 possible sky positions to use as objects from a possible 273. plFiberPlate : 14 possible sky positions to use as objects from a possible 272. plFiberPlate : 17 possible sky positions to use as objects from a possible 271. plFiberPlate : 7 possible sky positions to use as objects from a possible 270. plFiberPlate : 39 possible sky positions to use as objects from a possible 269. plFiberPlate : 28 possible sky positions to use as objects from a possible 268. plFiberPlate : 23 possible sky positions to use as objects from a possible 267. plFiberPlate : 11 possible sky positions to use as objects from a possible 266. plFiberPlate : 4 possible sky positions to use as objects from a possible 265. plFiberPlate : 11 possible sky positions to use as objects from a possible 264. plFiberPlate : 9 possible sky positions to use as objects from a possible 263. plFiberPlate : 2 possible sky positions to use as objects from a possible 262. plFiberPlate : 1 possible sky positions to use as objects from a possible 261. plFiberPlate : 44 possible sky positions to use as objects from a possible 260. plFiberPlate : 33 possible sky positions to use as objects from a possible 259. plFiberPlate : 23 possible sky positions to use as objects from a possible 258. plFiberPlate : 16 possible sky positions to use as objects from a possible 257. plFiberPlate : 8 possible sky positions to use as objects from a possible 256. plFiberPlate : 5 possible sky positions to use as objects from a possible 255. plFiberPlate : 8 possible sky positions to use as objects from a possible 254. plFiberPlate : 4 possible sky positions to use as objects from a possible 253. plFiberPlate : 6 possible sky positions to use as objects from a possible 252. plFiberPlate : 31 possible sky positions to use as objects from a possible 251. plFiberPlate : 27 possible sky positions to use as objects from a possible 250. plFiberPlate : 12 possible sky positions to use as objects from a possible 249. plFiberPlate : 12 possible sky positions to use as objects from a possible 248. plFiberPlate : 7 possible sky positions to use as objects from a possible 247. plFiberPlate : 5 possible sky positions to use as objects from a possible 246. plFiberPlate : 6 possible sky positions to use as objects from a possible 245. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 791 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2182.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2183.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2183.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapP-2184.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 98 18 2 72 10 3 44 18 4 72 25 5 64 33 6 57 29 7 47 23 8 64 23 9 63 26 10 115 32 11 93 19 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 133 164 plFiberPlate : adding spectro-photo std with objId = 4832 40 1 129 491 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 127 495 plFiberPlate : adding spectro-photo std with objId = 4832 40 2 127 231 plFiberPlate : adding spectro-photo std with objId = 4832 40 4 126 436 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 126 768 plFiberPlate : adding spectro-photo std with objId = 4832 40 3 126 599 plFiberPlate : adding spectro-photo std with objId = 4832 40 4 125 519 plFiberPlate : 25 possible sky positions to use as objects from a possible 133. plFiberPlate : 12 possible sky positions to use as objects from a possible 132. plFiberPlate : 1 possible sky positions to use as objects from a possible 131. plFiberPlate : 4 possible sky positions to use as objects from a possible 130. plFiberPlate : 4 possible sky positions to use as objects from a possible 129. plFiberPlate : 6 possible sky positions to use as objects from a possible 128. plFiberPlate : 4 possible sky positions to use as objects from a possible 127. plFiberPlate : 10 possible sky positions to use as objects from a possible 126. plFiberPlate : 9 possible sky positions to use as objects from a possible 125. plFiberPlate : 2 possible sky positions to use as objects from a possible 124. plFiberPlate : 2 possible sky positions to use as objects from a possible 123. plFiberPlate : 2 possible sky positions to use as objects from a possible 122. plFiberPlate : 2 possible sky positions to use as objects from a possible 121. plFiberPlate : 5 possible sky positions to use as objects from a possible 120. plFiberPlate : 3 possible sky positions to use as objects from a possible 119. plFiberPlate : 0 possible sky positions to use as objects from a possible 118. plFiberPlate: No sky found for bundle at 272.423 -84.379, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 118. plFiberPlate: No sky found for bundle at 272.423 -84.379, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 118. plFiberPlate: No sky found for bundle at 272.423 -84.379, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 118. plFiberPlate : 19 possible sky positions to use as objects from a possible 117. plFiberPlate : 18 possible sky positions to use as objects from a possible 116. plFiberPlate : 16 possible sky positions to use as objects from a possible 115. plFiberPlate : 10 possible sky positions to use as objects from a possible 114. plFiberPlate : 2 possible sky positions to use as objects from a possible 113. plFiberPlate : 9 possible sky positions to use as objects from a possible 112. plFiberPlate : 4 possible sky positions to use as objects from a possible 111. plFiberPlate : 2 possible sky positions to use as objects from a possible 110. plFiberPlate : 3 possible sky positions to use as objects from a possible 109. plFiberPlate : 17 possible sky positions to use as objects from a possible 108. plFiberPlate : 15 possible sky positions to use as objects from a possible 107. plFiberPlate : 11 possible sky positions to use as objects from a possible 106. plFiberPlate : 4 possible sky positions to use as objects from a possible 105. plFiberPlate : 3 possible sky positions to use as objects from a possible 104. plFiberPlate : 4 possible sky positions to use as objects from a possible 103. plFiberPlate : 5 possible sky positions to use as objects from a possible 102. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 842 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2183.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2184.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.04.3/plOverlay-2184.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sun Apr 24 19:42:24 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 11 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 107 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2174.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2174.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2174.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 77 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2175.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2175.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2175.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 106 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2176.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2176.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.0782,9.4716) and (4.07,11.61) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2176.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.5248,10.4128) and (-0.23,12.59) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 79 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2177.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2177.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2177.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 74 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2178.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2178.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.2969,11.2440) and (-2.28,12.13) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2178.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 137 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2179.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2179.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2179.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 87 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2180.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2180.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.5530,9.7303) and (-11.78,3.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2180.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 80 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2181.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2181.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2181.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 109 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2182.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2182.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2182.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 129 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2183.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2183.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2183.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 180 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2184.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2184.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.04.3/plFanuc-2184.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Sun Apr 24 19:42:59 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa0e6c1c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 11 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2174 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 769 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2175 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 739 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2176 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 768 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2177 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 741 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2178 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 736 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2179 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 799 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2180 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 749 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2181 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 742 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2182 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 771 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2183 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 791 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2184 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 9.1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 842 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sun Apr 24 19:43:19 CDT 2005 Begin running "plateEnder dr2005.04.3 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.04.3 -morePipes 1" failed. PS: Read file for stderr output of this job. Sender: LSF System Subject: Job 43058: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Apr 25 11:23:36 2005 Results reported at Mon Apr 25 11:27:00 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.04.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 19.43 sec. Max Memory : 11 MB Max Swap : 28 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Mon Apr 25 11:24:28 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Apr 25 11:26:24 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v16_221/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Mon Apr 25 11:26:26 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v16_221/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_4/Linux-2-4-2-3-2 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_2/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_23/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_2/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_5/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Mon Apr 25 11:26:31 CDT 2005 Begin running plate --------------------------------------------------------------- Mon Apr 25 11:26:33 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_221/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_221/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xabce264 makePlates : beginning loop over plObs chain; makePlates : making 11 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8046.par makePlates : plateInfo struct for plate 2174 : (h4).mjd 53519 (h4).raCen 250.007 (h4).decCen 36.197 (h4).haCen 34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 250.007 36.197 250.007 37.697 plMakePlateFromTile : mjd of obs : 53519.807874 Observed HA/dec of plate center, fiducial point (deg) : 33.998 36.185 33.998 37.684 The rotation angle of the fid. point is -86.922959 plMakePlateFromTile : beginning loop over 1675 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8047.par makePlates : plateInfo struct for plate 2175 : (h4).mjd 53519 (h4).raCen 241.40545 (h4).decCen 5.57236 (h4).haCen 28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 241.405 5.572 241.405 7.072 plMakePlateFromTile : mjd of obs : 53519.767461 Observed HA/dec of plate center, fiducial point (deg) : 27.998 5.565 27.998 7.065 The rotation angle of the fid. point is -40.238578 plMakePlateFromTile : beginning loop over 1642 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8048.par makePlates : plateInfo struct for plate 2176 : (h4).mjd 53519 (h4).raCen 242.50726 (h4).decCen 52.36524 (h4).haCen 42 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.507 52.365 242.507 53.865 plMakePlateFromTile : mjd of obs : 53519.809252 Observed HA/dec of plate center, fiducial point (deg) : 41.998 52.346 41.999 53.846 The rotation angle of the fid. point is -106.264308 plMakePlateFromTile : beginning loop over 1660 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8049.par makePlates : plateInfo struct for plate 2177 : (h4).mjd 53519 (h4).raCen 243.76748 (h4).decCen 16.66577 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 243.767 16.666 243.767 18.166 plMakePlateFromTile : mjd of obs : 53519.768448 Observed HA/dec of plate center, fiducial point (deg) : 25.998 16.656 25.998 18.155 The rotation angle of the fid. point is -50.681913 plMakePlateFromTile : beginning loop over 1691 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8050.par makePlates : plateInfo struct for plate 2178 : (h4).mjd 53519 (h4).raCen 242.3285 (h4).decCen 4.0651 (h4).haCen 27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 9.1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 242.329 4.065 242.329 5.565 plMakePlateFromTile : mjd of obs : 53519.767249 Observed HA/dec of plate center, fiducial point (deg) : 26.998 4.059 26.998 5.558 The rotation angle of the fid. point is -38.112990 plMakePlateFromTile : beginning loop over 1660 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.04.3/plPlugMapT-8051.par struct PLUGMAPOBJ - length mismatch between typedef and input Offending line: PLUGMAPOBJ {4144 40 4 71 135} 308.595703 76.805069 18.440 17.149 16.586 16.269 16.133 1.0 0.0 0.0 SERENDIPITY_MANUAL 0.0 0.0 0 0 0 -2130706432 1073741824 Error: "makePlates -verbose=2" failed. PS: Read file for stderr output of this job.