SPREDUCE2D: Log file spDiag2d-3209-54858.log opened Thu May 20 10:09:20 2010 SPREDUCE2D: Plot file spDiag2d-3209-54858.ps SPREDUCE2D: IDL version: x86_64 linux unix linux 6.4 Apr 26 2007 64 64 SPREDUCE2D: UNAME: Linux hammer1.astro.Princeton.EDU 2.6.18-164.6.1.el5.centos.plus #1 SMP Wed Nov 4 09:31:39 EST 2009 x86_64 x86_64 x86_64 GNU/Linux SPREDUCE2D: DISPLAY= SPREDUCE2D: idlspec2d version NOCVS:v5_3_23 SPREDUCE2D: idlutils version v5_3_0 SPREDUCE2D: specflat version v1_7 SPREDUCE2D: speclog version trunk 106949 SPREDUCE2D: Plan file spPlan2d-3209-54858.par SPREDUCE2D: DOCAMS = b1 b2 r1 r2 SPREDUCE2D: Begin plate 3209 at Thu May 20 10:09:20 2010 SPREDUCE2D: Plug map file = plPlugMapM-3209-54854-01.par FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE READPLUGMAP: b1: Rescaling SCI_EXPTIME values by 3.0000000 READPLUGMAP: b1: Adding fields from calibObj file PLUG2TSOBJ: b1: reading object calibration file: /u/dss/products/NULL/calibplate/v1.0.1/calibPlateP-3209.fits READPLUGMAP: b1: Matched 608 of 608 non-SKY objects READPLUGMAP: b1: PSF/fiber flux ratios = 1.37022 1.36705 1.37383 1.38974 1.38890 READPLUGMAP: b1: Using plug-map fluxes for 29 values in filter 0 READPLUGMAP: b1: Using plug-map fluxes for 11 values in filter 1 READPLUGMAP: b1: Using plug-map fluxes for 18 values in filter 2 READPLUGMAP: b1: Using plug-map fluxes for 15 values in filter 3 READPLUGMAP: b1: Using plug-map fluxes for 8 values in filter 4 SORTPLUGMAP: b1: Number of missing fibers: 2 FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE SPCALIB: b1: Tracing flat # 1 of 2 SPCALIB: b1: Reading flat sdR-b1-00058425.fit FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b1: Selecting op file opConfig-50000.par FINDOPFILE: b1: Selecting op file opECalib-51577.par FINDOPFILE: b1: Selecting op file opBC-51813.par SDSSPROC: b1: Measured read-noise in DN for amp# 2 = 3.69485 SDSSPROC: b1: Measured bias value in DN for amp# 2 = 1214.01 SDSSPROC: b1: Applying gain for amp# 2 = 1.10000 SDSSPROC: b1: Amp #2 Number of pix below bias-5*sigma= 1195. DN is 0 SDSSPROC: b1: Measured read-noise in DN for amp# 3 = 3.01300 SDSSPROC: b1: Measured bias value in DN for amp# 3 = 1024.76 SDSSPROC: b1: Applying gain for amp# 3 = 1.05000 SDSSPROC: b1: Amp #3 Number of pix below bias-5*sigma= 1009. DN is 1 SDSSPROC: b1: Number of saturated rows = 0 FINDOPFILE: b1: Selecting op file pixbiasave-00001-b1.fits SDSSPROC: b1: Correcting with bias image pixbiasave-00001-b1.fits FINDOPFILE: b1: Selecting op file pixflatave-53981-b1.fits SDSSPROC: b1: Correcting with pixel flat pixflatave-53981-b1.fits REJECT_FLAT: b1: WARNING: Reject flat as too faint: 80-th-percentile = 4.22124 SPCALIB: b1: Tracing flat # 2 of 2 SPCALIB: b1: Reading flat sdR-b1-00058427.fit FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b1: Selecting op file opConfig-50000.par FINDOPFILE: b1: Selecting op file opBC-51813.par SDSSPROC: b1: Measured read-noise in DN for amp# 2 = 3.66938 SDSSPROC: b1: Measured bias value in DN for amp# 2 = 1213.80 SDSSPROC: b1: Applying gain for amp# 2 = 1.10000 SDSSPROC: b1: Amp #2 Number of pix below bias-5*sigma= 1195. DN is 3 SDSSPROC: b1: Measured read-noise in DN for amp# 3 = 2.97908 SDSSPROC: b1: Measured bias value in DN for amp# 3 = 1024.86 SDSSPROC: b1: Applying gain for amp# 3 = 1.05000 SDSSPROC: b1: Amp #3 Number of pix below bias-5*sigma= 1009. DN is 0 SDSSPROC: b1: Number of saturated rows = 0 FINDOPFILE: b1: Selecting op file pixbiasave-00001-b1.fits SDSSPROC: b1: Correcting with bias image pixbiasave-00001-b1.fits FINDOPFILE: b1: Selecting op file pixflatave-53981-b1.fits SDSSPROC: b1: Correcting with pixel flat pixflatave-53981-b1.fits REJECT_FLAT: b1: WARNING: Reject flat as too faint: 80-th-percentile = 4.20705 SPCALIB: b1: Extracting arc # 1 of 2 SPCALIB: b1: Reading arc sdR-b1-00058426.fit FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b1: Selecting op file opConfig-50000.par FINDOPFILE: b1: Selecting op file opBC-51813.par SDSSPROC: b1: Measured read-noise in DN for amp# 2 = 3.65561 SDSSPROC: b1: Measured bias value in DN for amp# 2 = 1214.22 SDSSPROC: b1: Applying gain for amp# 2 = 1.10000 SDSSPROC: b1: Amp #2 Number of pix below bias-5*sigma= 1195. DN is 0 SDSSPROC: b1: Measured read-noise in DN for amp# 3 = 2.99334 SDSSPROC: b1: Measured bias value in DN for amp# 3 = 1024.76 SDSSPROC: b1: Applying gain for amp# 3 = 1.05000 SDSSPROC: b1: Amp #3 Number of pix below bias-5*sigma= 1009. DN is 0 SDSSPROC: b1: Number of saturated rows = 0 FINDOPFILE: b1: Selecting op file pixbiasave-00001-b1.fits SDSSPROC: b1: Correcting with bias image pixbiasave-00001-b1.fits FINDOPFILE: b1: Selecting op file pixflatave-53981-b1.fits SDSSPROC: b1: Correcting with pixel flat pixflatave-53981-b1.fits SPCALIB: b1: Fraction of bad pixels in arc = 4.57764e-05 SPCALIB: b1: Arc sdR-b1-00058426.fit paired with no flat SPCALIB: b1: Extracting arc # 2 of 2 SPCALIB: b1: Reading arc sdR-b1-00058428.fit FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b1: Selecting op file opConfig-50000.par FINDOPFILE: b1: Selecting op file opBC-51813.par SDSSPROC: b1: Measured read-noise in DN for amp# 2 = 3.68580 SDSSPROC: b1: Measured bias value in DN for amp# 2 = 1214.00 SDSSPROC: b1: Applying gain for amp# 2 = 1.10000 SDSSPROC: b1: Amp #2 Number of pix below bias-5*sigma= 1195. DN is 0 SDSSPROC: b1: Measured read-noise in DN for amp# 3 = 2.96950 SDSSPROC: b1: Measured bias value in DN for amp# 3 = 1024.80 SDSSPROC: b1: Applying gain for amp# 3 = 1.05000 SDSSPROC: b1: Amp #3 Number of pix below bias-5*sigma= 1009. DN is 1 SDSSPROC: b1: Number of saturated rows = 0 FINDOPFILE: b1: Selecting op file pixbiasave-00001-b1.fits SDSSPROC: b1: Correcting with bias image pixbiasave-00001-b1.fits FINDOPFILE: b1: Selecting op file pixflatave-53981-b1.fits SDSSPROC: b1: Correcting with pixel flat pixflatave-53981-b1.fits SPCALIB: b1: Fraction of bad pixels in arc = 2.93255e-05 SPCALIB: b1: Arc sdR-b1-00058428.fit paired with no flat SPCALIB: b1: Create fiberflats for flat # 1 of 2 SPCALIB: b1: Flat sdR-b1-00058425.fit paired with no arc SPCALIB: b1: Create fiberflats for flat # 2 of 2 SPCALIB: b1: Flat sdR-b1-00058427.fit paired with no arc SPCALIB: b1: Elapsed time = 19. seconds FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: b1: Warning: Disposing of invalid FITS header keyword IPARATE SELECT_FLAT: b1: No good flats SPREDUCE: b1: ABORT: No good flats (saturated?) SPREDUCE2D: b1: Time to reduce camera b1 = 26. seconds FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE READPLUGMAP: b2: Rescaling SCI_EXPTIME values by 3.0000000 READPLUGMAP: b2: Adding fields from calibObj file PLUG2TSOBJ: b2: reading object calibration file: /u/dss/products/NULL/calibplate/v1.0.1/calibPlateP-3209.fits READPLUGMAP: b2: Matched 608 of 608 non-SKY objects READPLUGMAP: b2: PSF/fiber flux ratios = 1.37022 1.36705 1.37383 1.38974 1.38890 READPLUGMAP: b2: Using plug-map fluxes for 29 values in filter 0 READPLUGMAP: b2: Using plug-map fluxes for 11 values in filter 1 READPLUGMAP: b2: Using plug-map fluxes for 18 values in filter 2 READPLUGMAP: b2: Using plug-map fluxes for 15 values in filter 3 READPLUGMAP: b2: Using plug-map fluxes for 8 values in filter 4 SORTPLUGMAP: b2: Number of missing fibers: 1 FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE SPCALIB: b2: Tracing flat # 1 of 2 SPCALIB: b2: Reading flat sdR-b2-00058425.fit FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b2: Selecting op file opConfig-50000.par FINDOPFILE: b2: Selecting op file opECalib-51577.par FINDOPFILE: b2: Selecting op file opBC-51813.par SDSSPROC: b2: Measured read-noise in DN for amp# 2 = 3.86302 SDSSPROC: b2: Measured bias value in DN for amp# 2 = 1274.49 SDSSPROC: b2: Applying gain for amp# 2 = 1.23000 SDSSPROC: b2: Amp #2 Number of pix below bias-5*sigma= 1255. DN is 0 SDSSPROC: b2: Measured read-noise in DN for amp# 3 = 3.37000 SDSSPROC: b2: Measured bias value in DN for amp# 3 = 1247.75 SDSSPROC: b2: Applying gain for amp# 3 = 1.26000 SDSSPROC: b2: Amp #3 Number of pix below bias-5*sigma= 1231. DN is 1 SDSSPROC: b2: Number of saturated rows = 0 FINDOPFILE: b2: Selecting op file pixbiasave-00001-b2.fits SDSSPROC: b2: Correcting with bias image pixbiasave-00001-b2.fits FINDOPFILE: b2: Selecting op file pixflatave-53981-b2.fits SDSSPROC: b2: Correcting with pixel flat pixflatave-53981-b2.fits REJECT_FLAT: b2: WARNING: Reject flat as too faint: 80-th-percentile = 4.60617 SPCALIB: b2: Tracing flat # 2 of 2 SPCALIB: b2: Reading flat sdR-b2-00058427.fit FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b2: Selecting op file opConfig-50000.par FINDOPFILE: b2: Selecting op file opBC-51813.par SDSSPROC: b2: Measured read-noise in DN for amp# 2 = 3.81796 SDSSPROC: b2: Measured bias value in DN for amp# 2 = 1274.60 SDSSPROC: b2: Applying gain for amp# 2 = 1.23000 SDSSPROC: b2: Amp #2 Number of pix below bias-5*sigma= 1255. DN is 0 SDSSPROC: b2: Measured read-noise in DN for amp# 3 = 3.37774 SDSSPROC: b2: Measured bias value in DN for amp# 3 = 1247.86 SDSSPROC: b2: Applying gain for amp# 3 = 1.26000 SDSSPROC: b2: Amp #3 Number of pix below bias-5*sigma= 1231. DN is 0 SDSSPROC: b2: Number of saturated rows = 0 FINDOPFILE: b2: Selecting op file pixbiasave-00001-b2.fits SDSSPROC: b2: Correcting with bias image pixbiasave-00001-b2.fits FINDOPFILE: b2: Selecting op file pixflatave-53981-b2.fits SDSSPROC: b2: Correcting with pixel flat pixflatave-53981-b2.fits REJECT_FLAT: b2: WARNING: Reject flat as too faint: 80-th-percentile = 4.58133 SPCALIB: b2: Extracting arc # 1 of 2 SPCALIB: b2: Reading arc sdR-b2-00058426.fit FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b2: Selecting op file opConfig-50000.par FINDOPFILE: b2: Selecting op file opBC-51813.par SDSSPROC: b2: Measured read-noise in DN for amp# 2 = 3.84609 SDSSPROC: b2: Measured bias value in DN for amp# 2 = 1274.49 SDSSPROC: b2: Applying gain for amp# 2 = 1.23000 SDSSPROC: b2: Amp #2 Number of pix below bias-5*sigma= 1255. DN is 0 SDSSPROC: b2: Measured read-noise in DN for amp# 3 = 3.36846 SDSSPROC: b2: Measured bias value in DN for amp# 3 = 1247.76 SDSSPROC: b2: Applying gain for amp# 3 = 1.26000 SDSSPROC: b2: Amp #3 Number of pix below bias-5*sigma= 1231. DN is 2 SDSSPROC: b2: Number of bleading columns = 1 SDSSPROC: b2: Number of saturated rows = 0 FINDOPFILE: b2: Selecting op file pixbiasave-00001-b2.fits SDSSPROC: b2: Correcting with bias image pixbiasave-00001-b2.fits FINDOPFILE: b2: Selecting op file pixflatave-53981-b2.fits SDSSPROC: b2: Correcting with pixel flat pixflatave-53981-b2.fits SPCALIB: b2: Fraction of bad pixels in arc = 0.000484228 SPCALIB: b2: Arc sdR-b2-00058426.fit paired with no flat SPCALIB: b2: Extracting arc # 2 of 2 SPCALIB: b2: Reading arc sdR-b2-00058428.fit FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: b2: Selecting op file opConfig-50000.par FINDOPFILE: b2: Selecting op file opBC-51813.par SDSSPROC: b2: Measured read-noise in DN for amp# 2 = 3.82000 SDSSPROC: b2: Measured bias value in DN for amp# 2 = 1274.46 SDSSPROC: b2: Applying gain for amp# 2 = 1.23000 SDSSPROC: b2: Amp #2 Number of pix below bias-5*sigma= 1255. DN is 1 SDSSPROC: b2: Measured read-noise in DN for amp# 3 = 3.36283 SDSSPROC: b2: Measured bias value in DN for amp# 3 = 1247.77 SDSSPROC: b2: Applying gain for amp# 3 = 1.26000 SDSSPROC: b2: Amp #3 Number of pix below bias-5*sigma= 1231. DN is 1 SDSSPROC: b2: Number of saturated rows = 0 FINDOPFILE: b2: Selecting op file pixbiasave-00001-b2.fits SDSSPROC: b2: Correcting with bias image pixbiasave-00001-b2.fits FINDOPFILE: b2: Selecting op file pixflatave-53981-b2.fits SDSSPROC: b2: Correcting with pixel flat pixflatave-53981-b2.fits SPCALIB: b2: Fraction of bad pixels in arc = 6.19888e-05 SPCALIB: b2: Arc sdR-b2-00058428.fit paired with no flat SPCALIB: b2: Create fiberflats for flat # 1 of 2 SPCALIB: b2: Flat sdR-b2-00058425.fit paired with no arc SPCALIB: b2: Create fiberflats for flat # 2 of 2 SPCALIB: b2: Flat sdR-b2-00058427.fit paired with no arc SPCALIB: b2: Elapsed time = 20. seconds FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: b2: Warning: Disposing of invalid FITS header keyword IPARATE SELECT_FLAT: b2: No good flats SPREDUCE: b2: ABORT: No good flats (saturated?) SPREDUCE2D: b2: Time to reduce camera b2 = 26. seconds FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE READPLUGMAP: r1: Rescaling SCI_EXPTIME values by 3.0000000 READPLUGMAP: r1: Adding fields from calibObj file PLUG2TSOBJ: r1: reading object calibration file: /u/dss/products/NULL/calibplate/v1.0.1/calibPlateP-3209.fits READPLUGMAP: r1: Matched 608 of 608 non-SKY objects READPLUGMAP: r1: PSF/fiber flux ratios = 1.37022 1.36705 1.37383 1.38974 1.38890 READPLUGMAP: r1: Using plug-map fluxes for 29 values in filter 0 READPLUGMAP: r1: Using plug-map fluxes for 11 values in filter 1 READPLUGMAP: r1: Using plug-map fluxes for 18 values in filter 2 READPLUGMAP: r1: Using plug-map fluxes for 15 values in filter 3 READPLUGMAP: r1: Using plug-map fluxes for 8 values in filter 4 SORTPLUGMAP: r1: Number of missing fibers: 2 FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE SPCALIB: r1: Tracing flat # 1 of 2 SPCALIB: r1: Reading flat sdR-r1-00058425.fit FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r1: Selecting op file opConfig-50000.par FINDOPFILE: r1: Selecting op file opECalib-51577.par FINDOPFILE: r1: Selecting op file opBC-51813.par SDSSPROC: r1: Measured read-noise in DN for amp# 2 = 3.83364 SDSSPROC: r1: Measured bias value in DN for amp# 2 = 1165.15 SDSSPROC: r1: Applying gain for amp# 2 = 1.09000 SDSSPROC: r1: Amp #2 Number of pix below bias-5*sigma= 1145. DN is 3 SDSSPROC: r1: Measured read-noise in DN for amp# 3 = 3.72871 SDSSPROC: r1: Measured bias value in DN for amp# 3 = 1213.22 SDSSPROC: r1: Applying gain for amp# 3 = 1.00000 SDSSPROC: r1: Amp #3 Number of pix below bias-5*sigma= 1193. DN is 0 SDSSPROC: r1: Number of saturated rows = 0 FINDOPFILE: r1: Selecting op file pixbiasave-00001-r1.fits SDSSPROC: r1: Correcting with bias image pixbiasave-00001-r1.fits FINDOPFILE: r1: Selecting op file pixflatave-53981-r1.fits SDSSPROC: r1: Correcting with pixel flat pixflatave-53981-r1.fits REJECT_FLAT: r1: WARNING: Reject flat as too faint: 80-th-percentile = 4.49562 SPCALIB: r1: Tracing flat # 2 of 2 SPCALIB: r1: Reading flat sdR-r1-00058427.fit FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r1: Selecting op file opConfig-50000.par FINDOPFILE: r1: Selecting op file opBC-51813.par SDSSPROC: r1: Measured read-noise in DN for amp# 2 = 3.79375 SDSSPROC: r1: Measured bias value in DN for amp# 2 = 1164.84 SDSSPROC: r1: Applying gain for amp# 2 = 1.09000 SDSSPROC: r1: Amp #2 Number of pix below bias-5*sigma= 1144. DN is 1 SDSSPROC: r1: Measured read-noise in DN for amp# 3 = 3.71182 SDSSPROC: r1: Measured bias value in DN for amp# 3 = 1212.88 SDSSPROC: r1: Applying gain for amp# 3 = 1.00000 SDSSPROC: r1: Amp #3 Number of pix below bias-5*sigma= 1193. DN is 0 SDSSPROC: r1: Number of saturated rows = 0 FINDOPFILE: r1: Selecting op file pixbiasave-00001-r1.fits SDSSPROC: r1: Correcting with bias image pixbiasave-00001-r1.fits FINDOPFILE: r1: Selecting op file pixflatave-53981-r1.fits SDSSPROC: r1: Correcting with pixel flat pixflatave-53981-r1.fits REJECT_FLAT: r1: WARNING: Reject flat as too faint: 80-th-percentile = 4.50943 SPCALIB: r1: Extracting arc # 1 of 2 SPCALIB: r1: Reading arc sdR-r1-00058426.fit FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r1: Selecting op file opConfig-50000.par FINDOPFILE: r1: Selecting op file opBC-51813.par SDSSPROC: r1: Measured read-noise in DN for amp# 2 = 3.80109 SDSSPROC: r1: Measured bias value in DN for amp# 2 = 1164.94 SDSSPROC: r1: Applying gain for amp# 2 = 1.09000 SDSSPROC: r1: Amp #2 Number of pix below bias-5*sigma= 1145. DN is 5 SDSSPROC: r1: Measured read-noise in DN for amp# 3 = 3.74685 SDSSPROC: r1: Measured bias value in DN for amp# 3 = 1213.05 SDSSPROC: r1: Applying gain for amp# 3 = 1.00000 SDSSPROC: r1: Amp #3 Number of pix below bias-5*sigma= 1193. DN is 0 SDSSPROC: r1: Number of saturated rows = 0 FINDOPFILE: r1: Selecting op file pixbiasave-00001-r1.fits SDSSPROC: r1: Correcting with bias image pixbiasave-00001-r1.fits FINDOPFILE: r1: Selecting op file pixflatave-53981-r1.fits SDSSPROC: r1: Correcting with pixel flat pixflatave-53981-r1.fits SPCALIB: r1: Fraction of bad pixels in arc = 4.67300e-05 SPCALIB: r1: Arc sdR-r1-00058426.fit paired with no flat SPCALIB: r1: Extracting arc # 2 of 2 SPCALIB: r1: Reading arc sdR-r1-00058428.fit FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r1: Selecting op file opConfig-50000.par FINDOPFILE: r1: Selecting op file opBC-51813.par SDSSPROC: r1: Measured read-noise in DN for amp# 2 = 3.80087 SDSSPROC: r1: Measured bias value in DN for amp# 2 = 1164.65 SDSSPROC: r1: Applying gain for amp# 2 = 1.09000 SDSSPROC: r1: Amp #2 Number of pix below bias-5*sigma= 1144. DN is 3 SDSSPROC: r1: Measured read-noise in DN for amp# 3 = 3.72573 SDSSPROC: r1: Measured bias value in DN for amp# 3 = 1212.80 SDSSPROC: r1: Applying gain for amp# 3 = 1.00000 SDSSPROC: r1: Amp #3 Number of pix below bias-5*sigma= 1193. DN is 0 SDSSPROC: r1: Number of saturated rows = 0 FINDOPFILE: r1: Selecting op file pixbiasave-00001-r1.fits SDSSPROC: r1: Correcting with bias image pixbiasave-00001-r1.fits FINDOPFILE: r1: Selecting op file pixflatave-53981-r1.fits SDSSPROC: r1: Correcting with pixel flat pixflatave-53981-r1.fits SPCALIB: r1: Fraction of bad pixels in arc = 5.65052e-05 SPCALIB: r1: Arc sdR-r1-00058428.fit paired with no flat SPCALIB: r1: Create fiberflats for flat # 1 of 2 SPCALIB: r1: Flat sdR-r1-00058425.fit paired with no arc SPCALIB: r1: Create fiberflats for flat # 2 of 2 SPCALIB: r1: Flat sdR-r1-00058427.fit paired with no arc SPCALIB: r1: Elapsed time = 19. seconds FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: r1: Warning: Disposing of invalid FITS header keyword IPARATE SELECT_FLAT: r1: No good flats SPREDUCE: r1: ABORT: No good flats (saturated?) SPREDUCE2D: r1: Time to reduce camera r1 = 25. seconds FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE READPLUGMAP: r2: Rescaling SCI_EXPTIME values by 3.0000000 READPLUGMAP: r2: Adding fields from calibObj file PLUG2TSOBJ: r2: reading object calibration file: /u/dss/products/NULL/calibplate/v1.0.1/calibPlateP-3209.fits READPLUGMAP: r2: Matched 608 of 608 non-SKY objects READPLUGMAP: r2: PSF/fiber flux ratios = 1.37022 1.36705 1.37383 1.38974 1.38890 READPLUGMAP: r2: Using plug-map fluxes for 29 values in filter 0 READPLUGMAP: r2: Using plug-map fluxes for 11 values in filter 1 READPLUGMAP: r2: Using plug-map fluxes for 18 values in filter 2 READPLUGMAP: r2: Using plug-map fluxes for 15 values in filter 3 READPLUGMAP: r2: Using plug-map fluxes for 8 values in filter 4 SORTPLUGMAP: r2: Number of missing fibers: 1 FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE SPCALIB: r2: Tracing flat # 1 of 2 SPCALIB: r2: Reading flat sdR-r2-00058425.fit FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r2: Selecting op file opConfig-50000.par FINDOPFILE: r2: Selecting op file opECalib-51577.par FINDOPFILE: r2: Selecting op file opBC-51813.par SDSSPROC: r2: Measured read-noise in DN for amp# 2 = 4.48771 SDSSPROC: r2: Measured bias value in DN for amp# 2 = 493.146 SDSSPROC: r2: Applying gain for amp# 2 = 1.05000 SDSSPROC: r2: Amp #2 Number of pix below bias-5*sigma= 472. DN is 16 SDSSPROC: r2: Measured read-noise in DN for amp# 3 = 3.69272 SDSSPROC: r2: Measured bias value in DN for amp# 3 = 1338.68 SDSSPROC: r2: Applying gain for amp# 3 = 1.05000 SDSSPROC: r2: Amp #3 Number of pix below bias-5*sigma= 1318. DN is 33 SDSSPROC: r2: Number of saturated rows = 0 FINDOPFILE: r2: Selecting op file pixbiasave-00001-r2.fits SDSSPROC: r2: Correcting with bias image pixbiasave-00001-r2.fits FINDOPFILE: r2: Selecting op file pixflatave-53981-r2.fits SDSSPROC: r2: Correcting with pixel flat pixflatave-53981-r2.fits REJECT_FLAT: r2: WARNING: Reject flat as too faint: 80-th-percentile = 4.98244 SPCALIB: r2: Tracing flat # 2 of 2 SPCALIB: r2: Reading flat sdR-r2-00058427.fit FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r2: Selecting op file opConfig-50000.par FINDOPFILE: r2: Selecting op file opBC-51813.par SDSSPROC: r2: Measured read-noise in DN for amp# 2 = 4.45924 SDSSPROC: r2: Measured bias value in DN for amp# 2 = 493.506 SDSSPROC: r2: Applying gain for amp# 2 = 1.05000 SDSSPROC: r2: Amp #2 Number of pix below bias-5*sigma= 472. DN is 18 SDSSPROC: r2: Measured read-noise in DN for amp# 3 = 3.67368 SDSSPROC: r2: Measured bias value in DN for amp# 3 = 1337.75 SDSSPROC: r2: Applying gain for amp# 3 = 1.05000 SDSSPROC: r2: Amp #3 Number of pix below bias-5*sigma= 1317. DN is 45 SDSSPROC: r2: Number of saturated rows = 0 FINDOPFILE: r2: Selecting op file pixbiasave-00001-r2.fits SDSSPROC: r2: Correcting with bias image pixbiasave-00001-r2.fits FINDOPFILE: r2: Selecting op file pixflatave-53981-r2.fits SDSSPROC: r2: Correcting with pixel flat pixflatave-53981-r2.fits REJECT_FLAT: r2: WARNING: Reject flat as too faint: 80-th-percentile = 4.99092 SPCALIB: r2: Extracting arc # 1 of 2 SPCALIB: r2: Reading arc sdR-r2-00058426.fit FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r2: Selecting op file opConfig-50000.par FINDOPFILE: r2: Selecting op file opBC-51813.par SDSSPROC: r2: Measured read-noise in DN for amp# 2 = 4.47004 SDSSPROC: r2: Measured bias value in DN for amp# 2 = 493.040 SDSSPROC: r2: Applying gain for amp# 2 = 1.05000 SDSSPROC: r2: Amp #2 Number of pix below bias-5*sigma= 471. DN is 12 SDSSPROC: r2: Measured read-noise in DN for amp# 3 = 3.69691 SDSSPROC: r2: Measured bias value in DN for amp# 3 = 1338.93 SDSSPROC: r2: Applying gain for amp# 3 = 1.05000 SDSSPROC: r2: Amp #3 Number of pix below bias-5*sigma= 1318. DN is 51 SDSSPROC: r2: Number of saturated rows = 0 FINDOPFILE: r2: Selecting op file pixbiasave-00001-r2.fits SDSSPROC: r2: Correcting with bias image pixbiasave-00001-r2.fits FINDOPFILE: r2: Selecting op file pixflatave-53981-r2.fits SDSSPROC: r2: Correcting with pixel flat pixflatave-53981-r2.fits SPCALIB: r2: Fraction of bad pixels in arc = 7.70092e-05 SPCALIB: r2: Arc sdR-r2-00058426.fit paired with no flat SPCALIB: r2: Extracting arc # 2 of 2 SPCALIB: r2: Reading arc sdR-r2-00058428.fit FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE FINDOPFILE: r2: Selecting op file opConfig-50000.par FINDOPFILE: r2: Selecting op file opBC-51813.par SDSSPROC: r2: Measured read-noise in DN for amp# 2 = 4.46271 SDSSPROC: r2: Measured bias value in DN for amp# 2 = 493.488 SDSSPROC: r2: Applying gain for amp# 2 = 1.05000 SDSSPROC: r2: Amp #2 Number of pix below bias-5*sigma= 472. DN is 20 SDSSPROC: r2: Measured read-noise in DN for amp# 3 = 3.65522 SDSSPROC: r2: Measured bias value in DN for amp# 3 = 1338.04 SDSSPROC: r2: Applying gain for amp# 3 = 1.05000 SDSSPROC: r2: Amp #3 Number of pix below bias-5*sigma= 1317. DN is 42 SDSSPROC: r2: Number of saturated rows = 0 FINDOPFILE: r2: Selecting op file pixbiasave-00001-r2.fits SDSSPROC: r2: Correcting with bias image pixbiasave-00001-r2.fits FINDOPFILE: r2: Selecting op file pixflatave-53981-r2.fits SDSSPROC: r2: Correcting with pixel flat pixflatave-53981-r2.fits SPCALIB: r2: Fraction of bad pixels in arc = 4.72069e-05 SPCALIB: r2: Arc sdR-r2-00058428.fit paired with no flat SPCALIB: r2: Create fiberflats for flat # 1 of 2 SPCALIB: r2: Flat sdR-r2-00058425.fit paired with no arc SPCALIB: r2: Create fiberflats for flat # 2 of 2 SPCALIB: r2: Flat sdR-r2-00058427.fit paired with no arc SPCALIB: r2: Elapsed time = 18. seconds FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE FITS_PURGE_NANS: r2: Warning: Disposing of invalid FITS header keyword IPARATE SELECT_FLAT: r2: No good flats SPREDUCE: r2: ABORT: No good flats (saturated?) SPREDUCE2D: r2: Time to reduce camera r2 = 25. seconds SPREDUCE2D: Time to reduce all cameras = 103. seconds SPREDUCE2D: Max memory usage = 157.8 MB SPREDUCE2D: Total time for SPREDUCE2D = 103. seconds SPREDUCE2D: Successful completion of SPREDUCE2D at Thu May 20 10:11:03 2010