APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Wednesday April 22, 2009 (MJD 54944) ---=== OBSERVING TEAM ===--- Viktor Malanushenko Dan Oravetz ---=== OBSERVING PLAN ===--- SEGUE Science! ---=== OBSERVING SUMMARY ===--- We were clouded out. ---=== OBSERVING LOG ===--- Afternoon ========= All systems checked. Collimation results are in Problems section. 45-degree alt. fiducial was not read during slew from 30 to 90 degrees. The 107-degree az. fiducial was not read during the slew from 121 to 75 degrees. PHOTO 2 is still down. 01:36Z - Optimistically began ventilation. Night ===== There were lots of clouds. 10:45Z - We still had optically thick clouds around and the satellite did not show any chance of us opening tonight, so we stopped ventilating and called it a night. endNight was run manually on account of PHOTO 2 being down. ---=== IMAGING RUN SUMMARY ===--- Run Time Stripe Lambda Last Flavor Comments Start End Begin End Frame ------------------------------------------------------------------------- ---=== IMAGING RUN DETAILS ===--- ---=== SKIPPY RESULTS ===--- Run Frame nFrames stars muErr muRms nuErr nuRms rot az el --------------------------------------------------------------------------- ---=== LTMATCH RESULTS ===--- Run Field nFields alt az nGood rowMean rowSig colMean colSig rot ------------------------------------------------------------------------ ---=== SPECTROSCOPY DATA SUMMARY ===--- Summary Checked (y/n): y QA Procedures Done (y/n): n UT Exp Time flavor comment (S/N)^2 totals ========================================== b1 r1 b2 r2 ----- sequence 60668, plate -9999 ------- 23:49 60668 0.0 bias ----- sequence 60669, plate 3305 ------- 00:03 60669 10.0 flat 00:05 60670 2.0 arc 00:11 60671 3.0 arc 00:13 60672 3.0 arc 01:18 60673 10.0 flat 01:20 60674 2.0 arc ---=== TELESCOPE OFFSETS AND SCALE I ===--- Time Instrument Az Alt Rot Scale pos offset pos offset pos offset ------------------------------------------------------------------------------ ---=== TELESCOPE OFFSETS AND SCALE II ===--- ---=== FOCUS LOG ===--- setmir piston Temp Wind Time Inst scale M1 M2 Foc Az Alt (C) MPH Dir filt fwhm ------------------------------------------------------------------------------ ---=== WEATHER LOG ===--- Wind Time Temp F Dewp F MPH Direction Dust DIMM Sky 23:48Z 58 14 25 252 (WSW) 612 - clouds 00:39Z 55 14 24 264 (W) 430 - clouds 01:11Z 55 15 25 243 (WSW) 411 - clouds 01:42Z 54 14 19 259 (W) 496 - clouds 02:14Z 53 13 15 262 (W) 655 - clouds 02:46Z 53 13 18 256 (WSW) 725 - clouds 03:19Z 53 15 17 248 (WSW) 756 - clouds 03:50Z 52 17 17 250 (WSW) 876 - clouds 04:23Z 52 17 13 255 (WSW) 879 - clouds 04:55Z 52 18 14 262 (W) 944 - clouds 05:27Z 51 18 15 264 (W) 848 - clouds 06:00Z 52 17 14 262 (W) 755 - clouds 06:32Z 51 15 10 231 (SW) 763 - clouds 07:03Z 51 15 14 255 (WSW) 805 - clouds 07:33Z 51 15 12 252 (WSW) 821 - clouds 08:05Z 50 15 15 281 (W) 840 - clouds 08:35Z 50 15 12 250 (WSW) 956 - clouds 09:08Z 50 15 10 250 (WSW) 953 - clouds 09:38Z 49 15 14 254 (WSW) 921 - clouds 10:09Z 49 15 14 222 (SW) 971 - clouds 10:40Z 49 15 9 261 (W) 971 - clouds ---=== TELESCOPE STATUS ===--- 01:36Z - Began ventilation. Doors and louvers opened, fans on. 10:45Z - Stopped ventilating and closed. No interlocks bypassed. Status at: 10:49Z Telescope stowed at: 30,121,00 mount Instrument mounted: Cartridge 8 Counterweights at: 256 lbs LN2 autofill systems: Connected and turned on. 180L LN2 dewar scales: Spectro 188.10 lbs, 18.41 psi Imager N/A lbs, N/A psi ---=== SOFTWARE USED ===--- IOP/SOP: v4_39_0 Watcher: v2_36_0 MCP: v6_6_0 TPM: tpm_v3_5_0 AstroDa: v15_13_1 TCC: TCC 2.10.0 2009-01-12 sdssProcedures: v2_43 SoS: v5_1_8 plate-mapper: v4_3_1 ---=== MIRROR NUMBERS ===--- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A -0.0260 -0.0280 Axial B 0.0330 0.0470 Axial C -0.0300 -0.0360 Trans D -0.7560 -0.7600 Lateral E 10.5918 10.5791 Lateral F 12.1793 12.1793 GALILS Commanded: 10450. -100. 5750. 8600. 10350. 10000. Actual: 10471. -76. 5755. 8616. 10374. 10023. SETMIR VALUES PriDesOrient: 0.00 -11.72 8.60 496.70 640.50 PriOrient: 1.06 -11.65 8.77 495.77 639.59 SECONDARY: ---------- Focus: 0.00 Air Temp.: 13.3 Alt.: 29.999997 MIGS TONIGHT NOMINAL Axial A 18.5860 18.5840 Axial B 15.6300 15.6220 Axial C 13.8090 13.8150 Trans D 15.1010 15.1080 GALILS Commanded: 1626641. 1528814. 1595687. -2950. -4550. Actual: 1626627. 1528808. 1595583. -2945. -4561. SETMIR VALUES SecDesOrient: 1257.00 -12.00 -28.00 -39.00 94.77 SecOrient: 1257.03 -12.03 -28.00 -39.19 94.72 ---=== PROBLEMS IN DETAIL ===--- Colimate was checked and adjusted now to ~ +9 C. sp1> Coll_motor_A 3500 01P0000003500 Coll_motor_B 3500 02P0000003500 Coll_motor_C 3500 01P0000003500 Temp_Median 13.9 sp2> Coll_motor_A 1826 01P0000001826 Coll_motor_B 1253 02P0000001253 Coll_motor_C 1105 01P0000001105 Temp_Median 12.5 IDL 5.5a> collimate, 60671 % Compiled module: COLLIMATE. Reading /data/spectro/54944/sdR-b1-00060671.fit Reading /data/spectro/54944/sdR-b1-00060672.fit COLLIMATE: Min offset = -0.11 pix COLLIMATE: Max offset = 1.02 pix COLLIMATE: RMS across CCD = 0.31 pix COLLIMATE: Mean offset = 0.47 pix COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -16.6 degrees for spectro-1 COLLIMATE: (if red is already in focus) Log file = Collimate-54944-b1-00060671.log PostScript file = Collimate-54944-b1-00060671.ps Reading /data/spectro/54944/sdR-b2-00060671.fit Reading /data/spectro/54944/sdR-b2-00060672.fit COLLIMATE: Min offset = 0.04 pix COLLIMATE: Max offset = 0.88 pix COLLIMATE: RMS across CCD = 0.21 pix COLLIMATE: Mean offset = 0.59 pix COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -21.2 degrees for spectro-2 COLLIMATE: (if red is already in focus) Log file = Collimate-54944-b2-00060671.log PostScript file = Collimate-54944-b2-00060671.ps Reading /data/spectro/54944/sdR-r1-00060671.fit Reading /data/spectro/54944/sdR-r1-00060672.fit COLLIMATE: Min offset = -1.12 pix COLLIMATE: Max offset = -0.00 pix COLLIMATE: RMS across CCD = 0.33 pix COLLIMATE: Mean offset = -0.63 pix COLLIMATE: Camera r1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of 5749 steps for spectro-1 COLLIMATE: Issue SOP command: "sp1; mechPiston 5749" Log file = Collimate-54944-r1-00060671.log PostScript file = Collimate-54944-r1-00060671.ps Reading /data/spectro/54944/sdR-r2-00060671.fit Reading /data/spectro/54944/sdR-r2-00060672.fit COLLIMATE: Min offset = -1.47 pix COLLIMATE: Max offset = -0.27 pix COLLIMATE: RMS across CCD = 0.33 pix COLLIMATE: Mean offset = -0.64 pix COLLIMATE: Camera r2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of 5888 steps for spectro-2 COLLIMATE: Issue SOP command: "sp2; mechPiston 5888" Log file = Collimate-54944-r2-00060671.log PostScript file = Collimate-54944-r2-00060671.ps % Program caused arithmetic error: Floating illegal operand mechPiston +2000 After: ===== sp1> Coll_motor_A 5499 01P0000005499 Coll_motor_B 5500 02P0000005500 Coll_motor_C 5499 01P0000005499 Temp_Median 13.8 sp2> Coll_motor_A 3826 01P0000003826 Coll_motor_B 3254 02P0000003254 Coll_motor_C 3105 01P0000003105 Temp_Median 12.5 PHOTO 2 crate is down: im> initNight Error: {id1 {}} {id2 {}} {id3 {}} {id4 {ICC id4 (crate 2, board 0) is not available Bad ICC}} {id5 {ICC id5 (crate 2, board 1) is not available Bad ICC}} {id6 {ICC id6 (crate 2, board 2) is not available Bad ICC}} {ad1 {}} {ad2 {}} {ad3 {}} {ad4 {}} watch> startClient connected: registered 177... 3 can't read "rtData(daData,archState,id4)": no such element in array can't read "rtData(daData,archState,id4)": no such element in array while executing "set state $rtData(daData,archState,$idNode)..." invoked from within "if {[regexp {(id[1-6])} $node foo idNode]} { set state $rtData(daData,archState,$idNode) set depth $rtData(daData,archQDepth,$idNode) . ..." ("foreach" body line 2) invoked from within "foreach node $nodeList { if {[regexp {(id[1-6])} $node foo idNode]} { set state $rtData(daData,archState,$idNode) set depth $rtData(daData ..." invoked from within "if {[info exists rtData(nodeList)] && [array names rtData daData*] != ""} { set nodeList $rtData(nodeList) if {$nodeList == ""} { return } # scan ..." (procedure "rtEngine" line 9) invoked from within "rtEngine" ("eval" body line 1) invoked from within "eval $procname $args" rtEngine is scheduled, further errors sent to murmur