18:50 Ready to open. Some clouds at the Sun set but moustly blue sky.
      Cart 2 plt 634 on the telescope.
20:05 Ready to go.
20:50 An fk5 star found with no problem using the last night offsets.
      Again the seeing is very bad  from 2.5 - 4.0", 3.5 m telescope
      observrs reported seeing about 4". The fficiency read from the 
      guider: ~25%. There are thin clouds around, and we are collecting 
      noise, so we decided do postcalib and no smearing.  We took 4
      science exposures.  The sky was too bright for all of them.  Only
      one of these exposures had (S/N)^2 > 2 and this was for only
      one camera (r2).  Son-of-spectro complained about red monsters,
      whopping fibers, scattered light and large flexure.

    Again we have problems with "fiducial reading" first time occured:
Aug 27 22:34:37 sdssmcp    tLatch     dsc_I_trcInfo Applying correction 
3859286 to azimuth 
Aug 27 22:34:37 sdssmcp    tLatch     dsc_E_trcErr     correction for azimuth 
3859286 is too large 
Aug 27 22:34:37 sdssmcp    tLatch     dsc_W_trcWarn Not disabling MS.ON; error
3859286 (max allowed: 600) 
      and later.
     
      And we keep ignoring:
0 0 I Received="?GOCORR one or more axes did not end on a full step  
0,  0,  0,  0,  1"



22:45 Cart 9 plt 644 on. We didn't find stars with go to field, but we've found
      quickly fk5 star in a fiber. The seeing is getting better!
      However wind and its speed remain the same...
      The efficiency is high  over 60%, but we've got very low S/N. Perhaps 
      the sky brightness is too high?  We did 5 science exposures for this
      plate.  The sky was too bright for all of them.  Three of the exposures
      had (S/N)^2 > 2 for r2.  No usefule data for b2 and r1.  Numbers were
      not available for b1 because son-of-spectro couldn't reduce the arc
      but it is doubtful any of the data were usable.  Son-of spectro again
      complained about whopping fibers, scattered light and large flexure.
23:30 Thick clouds are  comming.
00:30 We stopped exposure and postcalib (needed because we SOP couldn't reduce
      data in blue 1).
00:40 High humidity- closing.
03:30 Humidity rapidly dropped down to 60% , we waited a while and reopened 
      the telescope, with cart 3 plt 666 on.

04:00 enclosure off, catr 3 plt 666 mounted, we are back on the sky.
      Seeing 2.5 no moon and the efficiency over 60%.

      Bizarre - Mike in his SAOimage window couldn't see a star in the guider
      11-th fiber, but Jurek in his control SAOimage window saw stars in all
      fibers - can it be explained (cart 3 plt 666)?

04:40 We've finished cart 3 plt 666 with a first exposure (keep in mind that
      last night we've got S/N > 12 for that plate). Since there is no more
      plates available at this time, we decided to take a few more exposures
      for this plate.

05:20 Mounting cart into 2 plt 634 and closing the telescope.
05:50 telescope in enclosure: cart 2 plt 634 on. 

05:50 dewars forced to fill up, hoses unhooked!

      WE ARE LEAVING TELESCOPE TRACKING !!!

      track 121,30 mount /rota=0 /rotty=mount

      WIND BAFFLE off and locked,


endNight -doSpectro -doTpm : data written without any problems.