APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Thursday May 3, 2007 (MJD 54224) ---=== OBSERVING TEAM ===--- Elena Malanushenko Viktor Malanushenko Brian Lee (UF) Peng Cheng Guo (UF) ---=== OBSERVING PLAN ===--- ET Science! ---=== OBSERVING SUMMARY ===--- The weather was very good and we completed ET night program with cartridges 3,1,5,8,9,7,and 8 again. When I was closing sop gui session I have got error message (see log). Cart 6 did not produce error while loading as it was on previous two nights (when we observed that cartridge). No other problems to report. ---=== OBSERVING LOG ===--- Afternoon: --------- The telescope has been checked and prepared for observations. Everything works properly. Night: ------ Photometric, wind up to 27 mph; T=10.6C, dust 1.7K, humidity 33%. 01:15Z begin ventillation 01:55Z enclosure is off 02:43Z Cart 3 plate 8024. FK5 One 50 min exposure. Seeing is 1.4", and foc=-50. 03:44Z Cart 1 plate 8026. FSonGTF, One 50 min exposure. Seeing is 1.3", and foc=-120. 04:45Z Cart 5 plate 8025. FSonGTF and guess (D+5), One 50 min exposure. Seeing is 1.5", and foc=-100. 05:58Z Cart 8 plate 8021. FK5, One 50 min exposure. Seeing is 1.3", and foc=-25. Calibration. 07:06Z Cart 6 plate 8027. FSonGTF, One 50 min exposure. Seeing is 1.6", and foc=25. Steph has found that this cartridge last two nights created sop error while it is loading. But tonight it was ok, no sop error associated with cartridge 6. 08:10Z Cart 9 plate 8028. FSonGTF, One 50 min exposure. Seeing is 1.2", and foc=0. 09:16Z Cart 7 plate 8022. FK5, One 50 min exposure. Seeing is 1.4", and foc=0. 10:30Z Cart 8 plate 8021. FSonGTF, One 50 min exposure. Seeing is 1.2", and foc=100. 11:25Z endNight is completed. When I was closing the sop guider GUI I have got error message in Tcl Script: "bad window path name ".guidergui.scalechange.entry". see Stack trace for Error see in the problem section. ---=== IMAGING RUN SUMMARY ===--- Run Time Stripe Lambda Last Flavor Comments Start End Begin End Frame ------------------------------------------------------------------------- ---=== IMAGING RUN DETAILS ===--- ---=== SKIPPY RESULTS ===--- Run Frame nFrames stars muErr muRms nuErr nuRms rot az el --------------------------------------------------------------------------- ---=== LTMATCH RESULTS ===--- Run Field nFields alt az nGood rowMean rowSig colMean colSig rot ------------------------------------------------------------------------ ---=== SPECTROSCOPY DATA SUMMARY ===--- Summary Checked (y/n): QA Procedures Done (y/n): UT Exp Time flavor comment (S/N)^2 totals ========================================== b1 r1 b2 r2 ----- sequence 44580, plate -9999 ------- 01:04 44580 0.0 bias ---=== TELESCOPE OFFSETS AND SCALE I ===--- Time Instrument Az Alt Rot Scale pos offset pos offset pos offset ------------------------------------------------------------------------------ 03:18Z 3 8024 -41.56 0.0007 71.37 0.0028 144.02 0.0083 1.000200 03:50Z 1 8026 143.33 0.0039 60.13 0.0023 -57.93 -0.0185 1.000200 5 8025 58 06:20Z 8 8021 86.09 0.0015 64.84 0.0046 251.33 -0.0020 1.000150 08:02Z 6 8027 121.00 0.0015 90.00 0.0046 -0.00 -0.0020 1.000150 08:27Z 9 8028 123.55 0.0015 55.38 0.0046 -83.99 -0.0020 1.000100 09:47Z 7 8022 241.31 0.0052 76.43 0.0016 70.10 0.0019 1.000190 10:33Z 8 8021 270.23 0.0009 59.74 0.0018 108.06 -0.0112 1.000120 ---=== TELESCOPE OFFSETS AND SCALE II ===--- ---=== FOCUS LOG ===--- setmir piston Temp Wind Time Inst scale M1 M2 Foc Az Alt (C) MPH Dir filt fwhm ------------------------------------------------------------------------------ 03:18Z 3 8024 1.00020 -1975 -556 -50 -41 71.4 11.3 14 266 -- 1.4 03:50Z 1 8026 1.00020 -1975 -603 -120 143 60.1 11.5 12 240 -- 1.3 5 8025 -100 58 11.3 -- 1.5 06:20Z 8 8021 1.00015 -1481 -110 -25 86 64.7 10.8 19 268 -- 1.1 08:02Z 6 8027 1.00015 -1481 -51 50 121 90.0 9.5 14 266 -- 1.7 08:27Z 9 8028 1.00010 -988 348 0 124 55.4 9.6 20 256 -- 1.2 09:47Z 7 8022 1.00019 -1876 -421 10 241 76.5 9.1 21 276 -- 1.4" 10:33Z 8 8021 1.00012 -1185 272 100 270 59.8 8.4 16 266 -- 1.2" ---=== WEATHER LOG ===--- Wind Time Temp F Dewp F MPH Direction Dust DIMM Sky 23:49Z 56 22 22 262 (W) 1673 - 00:21Z 56 24 23 269 (W) 1759 - 00:54Z 54 24 20 268 (W) 1748 - 01:25Z 52 24 22 246 (WSW) 1776 - 01:56Z 51 21 19 262 (W) 1719 - 02:27Z 51 21 18 267 (W) 1651 - 02:57Z 51 21 15 236 (SW) 1559 - 03:28Z 52 19 13 265 (W) 1424 - 03:59Z 52 20 8 242 (WSW) 1399 - 04:30Z 52 20 9 261 (W) 1438 - 05:03Z 52 20 13 271 (W) 1429 - 05:36Z 51 20 12 266 (W) 1450 - 06:08Z 51 20 18 267 (W) 1471 - 06:40Z 51 19 17 266 (W) 1466 - 07:10Z 50 20 15 262 (W) 1503 - 07:42Z 50 20 13 263 (W) 1446 - 08:16Z 49 20 25 262 (W) 1427 - 08:48Z 49 19 16 256 (WSW) 1378 - 09:21Z 49 20 23 269 (W) 1401 - 09:53Z 48 20 19 268 (W) 1366 - 10:25Z 47 20 14 265 (W) 1404 - 10:57Z 46 21 15 268 (W) 1426 - 11:29Z 46 21 17 269 (W) 1320 - ---=== TELESCOPE STATUS ===--- 01:15Z Ventilation 01:55Z Telescope is opened. 11:30Z Telescope is closed. No interlocks bypassed. Telescope stowed at: 30,121,00 mount Cartridge 8 is mounted. Counterwights 250 lbs. Autofill is connected but did not force fill. Spectro: 72 lb (I have special request from Norm do not change the dewar) Imager: 198 lb ---=== SOFTWARE USED ===--- IOP/SOP: v4_32_0 Watcher: v2_35_0 MCP: v6_3_2 TPM: tpm_v3_5_0 AstroDa: v15_13_1 TCC: TCC 2.7.2.1 August 6 2004 sdssProcedures: v2_27 SoS: v5_1_8 plate-mapper: v4_3_1 ---=== MIRROR NUMBERS ===--- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A -0.0010 -0.0050 Axial B 0.0100 0.0090 Axial C 0.0200 0.0160 Trans D 0.0120 0.0040 Lateral E 9.9695 9.9568 Lateral F 11.5443 11.5443 GALILS Commanded: 4600. -2000. 2650. -9300. -9800. -9800. Actual: 4600. -2000. 2650. -9300. -9800. -9800. SETMIR VALUES PriDesOrient: 0.00 0.00 0.00 0.00 0.00 PriOrient: 0.00 0.00 0.00 0.00 0.00 SECONDARY: ---------- Focus: 0.00 Air Temp.: 10.8 Alt.: 30.026636 MIGS TONIGHT NOMINAL Axial A -0.0260 -0.0240 Axial B -0.0340 -0.0280 Axial C -0.0450 -0.0370 Trans D -0.0130 -0.0040 GALILS Commanded: 1613980. 1594742. 1543240. -10550. -5800. Actual: 1614053. 1594719. 1543082. -10535. -5822. SETMIR VALUES SecDesOrient: 1257.00 20.00 -10.00 -100.00 176.64 SecOrient: 1257.03 19.94 -9.96 -100.41 176.60 ---=== PROBLEMS IN DETAIL ===--- Watcher messages: ------------ Mechanical Systems:not connected (1:) MCP: axes: rotator (addoffset: Max accl. for rotator exceeded: 286/1000 (2007-05-04 03:50:32Z sdssmcp): 2007-05-04 03:50:45Z I cannot copy and past the other watcher error messages because its GUI does not allowed to copy and past blocks. I prefer do not close and open watcher again. All messages were similar to previous nights and nothing new. --------------- When I was closing the sop guider GUI I have got error message in Tcl Script: "bad window path name ".guidergui.scalechange.entry". Stack trace fpr Error: bad window path name ".guidergui.scalechange.entry" while executing "winfo width $w" invoked from within "if {$x >= [winfo width $w]} { $w xview scroll 2 units tkEntryMouseSelect $w $x } elseif {$x < 0} { $w xview scroll -2 units tkEntryMouseSelect ..." (procedure "tkEntryAutoScan" line 4) invoked from within "tkEntryAutoScan .guidergui.scalechange.entry" ("after" script)