Sender: LSF System Subject: Job 47390: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Mar 13 15:25:13 2002 Results reported at Wed Mar 13 15:32:42 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v12_23 setup plate v3_6 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort cd /opdb/d1/data/drillRuns/dr2002.03.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeDrillPos -verbose=2 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 269.17 sec. Max Memory : 9 MB Max Swap : 31 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Mar 13 15:25:16 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Mar 13 15:25:24 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v3_2/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_15/OSF1-V4:/fnal/ups/prd/perl/v5_005aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_5c/OSF1/bin:/sdss/ups/prd/mt/v7_4/OSF1/bin:/sdss/ups/prd/photo/v5_2_27/OSF1/bin:/sdss/ups/prd/ssc/v4_12/OSF1/bin:/sdss/ups/prd/dp/v12_23/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_7/OSF1/bin:/sdss/ups/prd/sdssmath/v5_4/OSF1/bin:/sdss/ups/prd/astrotools/v5_6/OSF1/bin:/sdss/ups/prd/plate/v3_6/OSF1/bin --------------------------------------------------------------- Wed Mar 13 15:25:24 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_5c/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_6/OSF1 DERVISH_DIR=/sdss/ups/prd/dervish/v8_7/OSF1 DP_DIR=/sdss/ups/prd/dp/v12_23/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_15/OSF1-V4 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_7/OSF1/doc/www/dervish.home.html KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v3_2/OSF1 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_2/NULL MT_DIR=/sdss/ups/prd/mt/v7_4/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v1_9_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_005aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_2_27/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_6/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_4/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v4_12/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 --------------------------------------------------------------- Wed Mar 13 15:25:25 CST 2002 Begin running plate --------------------------------------------------------------- Wed Mar 13 15:25:25 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h0).parity 1 (h0).scale 217.7358 (h0).xCenter 0 (h0).yCenter 0 (h0).coeff 0x140e46c68 makePlates : beginning loop over plObs chain; makePlates : making 17 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0682.par makePlates : plateInfo struct for plate 910 : (h2).mjd 52404 (h2).raCen 202.0725 (h2).decCen -2.38387 (h2).haCen 7 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 202.072 -2.384 202.072 -0.884 plMakePlateFromTile : mjd of obs : 52404.652832 Observed HA/dec of plate center, fiducial point (deg) : 6.998 -2.384 6.998 -0.885 The rotation angle of the fid. point is -10.094450 plMakePlateFromTile : beginning loop over 1367 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0683.par makePlates : plateInfo struct for plate 911 : (h2).mjd 52404 (h2).raCen 203.2488 (h2).decCen -2.407042 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 203.249 -2.407 203.249 -0.907 plMakePlateFromTile : mjd of obs : 52404.694886 Observed HA/dec of plate center, fiducial point (deg) : 20.998 -2.407 20.998 -0.907 The rotation angle of the fid. point is -27.706355 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0684.par makePlates : plateInfo struct for plate 912 : (h2).mjd 52404 (h2).raCen 204.7001 (h2).decCen -2.351883 (h2).haCen 20 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 204.700 -2.352 204.700 -0.852 plMakePlateFromTile : mjd of obs : 52404.696135 Observed HA/dec of plate center, fiducial point (deg) : 19.998 -2.352 19.998 -0.852 The rotation angle of the fid. point is -26.640872 plMakePlateFromTile : beginning loop over 1337 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0685.par makePlates : plateInfo struct for plate 913 : (h2).mjd 52404 (h2).raCen 206.4551 (h2).decCen -2.311036 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 206.455 -2.311 206.455 -0.811 plMakePlateFromTile : mjd of obs : 52404.695455 Observed HA/dec of plate center, fiducial point (deg) : 17.998 -2.311 17.998 -0.811 The rotation angle of the fid. point is -24.388410 plMakePlateFromTile : beginning loop over 1371 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0686.par makePlates : plateInfo struct for plate 914 : (h2).mjd 52404 (h2).raCen 208.5188 (h2).decCen -2.315051 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 208.519 -2.315 208.519 -0.815 plMakePlateFromTile : mjd of obs : 52404.695630 Observed HA/dec of plate center, fiducial point (deg) : 15.998 -2.315 15.998 -0.815 The rotation angle of the fid. point is -22.004842 plMakePlateFromTile : beginning loop over 1342 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0687.par makePlates : plateInfo struct for plate 915 : (h2).mjd 52404 (h2).raCen 210.6854 (h2).decCen -2.24656 (h2).haCen 14 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 210.685 -2.247 210.685 -0.747 plMakePlateFromTile : mjd of obs : 52404.696090 Observed HA/dec of plate center, fiducial point (deg) : 13.998 -2.246 13.998 -0.747 The rotation angle of the fid. point is -19.549736 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0688.par makePlates : plateInfo struct for plate 916 : (h2).mjd 52404 (h2).raCen 212.9139 (h2).decCen -2.156094 (h2).haCen 27 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 212.914 -2.156 212.914 -0.656 plMakePlateFromTile : mjd of obs : 52404.738288 Observed HA/dec of plate center, fiducial point (deg) : 26.998 -2.154 26.998 -0.655 The rotation angle of the fid. point is -33.855840 plMakePlateFromTile : beginning loop over 1369 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0689.par makePlates : plateInfo struct for plate 917 : (h2).mjd 52404 (h2).raCen 214.865 (h2).decCen -2.263085 (h2).haCen 25 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 214.865 -2.263 214.865 -0.763 plMakePlateFromTile : mjd of obs : 52404.738151 Observed HA/dec of plate center, fiducial point (deg) : 24.998 -2.261 24.998 -0.762 The rotation angle of the fid. point is -31.900306 plMakePlateFromTile : beginning loop over 1299 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0690.par makePlates : plateInfo struct for plate 918 : (h2).mjd 52404 (h2).raCen 216.9804 (h2).decCen -2.114126 (h2).haCen 23 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 216.980 -2.114 216.980 -0.614 plMakePlateFromTile : mjd of obs : 52404.738469 Observed HA/dec of plate center, fiducial point (deg) : 22.998 -2.112 22.998 -0.613 The rotation angle of the fid. point is -29.984320 plMakePlateFromTile : beginning loop over 1352 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0691.par makePlates : plateInfo struct for plate 919 : (h2).mjd 52404 (h2).raCen 218.9747 (h2).decCen -2.080963 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 218.975 -2.081 218.975 -0.581 plMakePlateFromTile : mjd of obs : 52404.738451 Observed HA/dec of plate center, fiducial point (deg) : 20.998 -2.079 20.998 -0.580 The rotation angle of the fid. point is -27.889169 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0692.par makePlates : plateInfo struct for plate 920 : (h2).mjd 52404 (h2).raCen 221.3589 (h2).decCen -2.019327 (h2).haCen 18 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 221.359 -2.019 221.359 -0.519 plMakePlateFromTile : mjd of obs : 52404.736743 Observed HA/dec of plate center, fiducial point (deg) : 17.998 -2.018 17.998 -0.518 The rotation angle of the fid. point is -24.541344 plMakePlateFromTile : beginning loop over 1306 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0693.par makePlates : plateInfo struct for plate 921 : (h2).mjd 52404 (h2).raCen 223.7898 (h2).decCen -1.9709 (h2).haCen 16 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 223.790 -1.971 223.790 -0.471 plMakePlateFromTile : mjd of obs : 52404.737934 Observed HA/dec of plate center, fiducial point (deg) : 15.998 -1.969 15.998 -0.470 The rotation angle of the fid. point is -22.173172 plMakePlateFromTile : beginning loop over 1322 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0694.par makePlates : plateInfo struct for plate 922 : (h2).mjd 52404 (h2).raCen 226.2738 (h2).decCen -1.844736 (h2).haCen 28 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 226.274 -1.845 226.274 -0.345 plMakePlateFromTile : mjd of obs : 52404.778070 Observed HA/dec of plate center, fiducial point (deg) : 27.998 -1.842 27.998 -0.342 The rotation angle of the fid. point is -34.951523 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0695.par makePlates : plateInfo struct for plate 923 : (h2).mjd 52404 (h2).raCen 228.2656 (h2).decCen -1.879583 (h2).haCen 26 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 228.266 -1.880 228.266 -0.380 plMakePlateFromTile : mjd of obs : 52404.778045 Observed HA/dec of plate center, fiducial point (deg) : 25.998 -1.876 25.998 -0.377 The rotation angle of the fid. point is -33.089486 plMakePlateFromTile : beginning loop over 1326 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0696.par makePlates : plateInfo struct for plate 924 : (h2).mjd 52404 (h2).raCen 230.7031 (h2).decCen -1.740889 (h2).haCen 24 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 230.703 -1.741 230.703 -0.241 plMakePlateFromTile : mjd of obs : 52404.779255 Observed HA/dec of plate center, fiducial point (deg) : 23.998 -1.738 23.998 -0.238 The rotation angle of the fid. point is -31.220704 plMakePlateFromTile : beginning loop over 1366 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0697.par makePlates : plateInfo struct for plate 925 : (h2).mjd 52404 (h2).raCen 233.1622 (h2).decCen -1.682619 (h2).haCen 21 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 233.162 -1.683 233.162 -0.183 plMakePlateFromTile : mjd of obs : 52404.777753 Observed HA/dec of plate center, fiducial point (deg) : 20.998 -1.679 20.998 -0.180 The rotation angle of the fid. point is -28.115269 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk36/complete//plPlugMapT-0698.par makePlates : plateInfo struct for plate 926 : (h2).mjd 52404 (h2).raCen 235.4128 (h2).decCen -1.588599 (h2).haCen 19 (h2).theta 0 (h2).tempShop 0 (h2).tempObs 9.1 (h2).thermalExpand 0 (h2).maxRadius 0 (h2).ZOffset 0 (h2).ZOffsetR 0 (h2).wave 0.5 (h2).obsPres 1013.25 (h2).obsRH 0.2 (h2).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 235.413 -1.589 235.413 -0.089 plMakePlateFromTile : mjd of obs : 52404.778446 Observed HA/dec of plate center, fiducial point (deg) : 18.998 -1.585 18.998 -0.086 The rotation angle of the fid. point is -25.931097 plMakePlateFromTile : beginning loop over 1290 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Mar 13 15:26:33 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h1).id 1 (h1).xCen 199 (h1).yCen -131 (h1).rad 165 (h1).xPref 199 (h1).yPref -131 (h1).id 2 (h1).xCen 93 (h1).yCen -263 (h1).rad 165 (h1).xPref 93 (h1).yPref -263 (h1).id 3 (h1).xCen -121 (h1).yCen -263 (h1).rad 165 (h1).xPref -121 (h1).yPref -263 (h1).id 4 (h1).xCen -227 (h1).yCen -131 (h1).rad 165 (h1).xPref -227 (h1).yPref -131 (h1).id 5 (h1).xCen -199 (h1).yCen 131 (h1).rad 165 (h1).xPref -199 (h1).yPref 131 (h1).id 6 (h1).xCen -93 (h1).yCen 263 (h1).rad 165 (h1).xPref -93 (h1).yPref 263 (h1).id 7 (h1).xCen 121 (h1).yCen 263 (h1).rad 165 (h1).xPref 121 (h1).yPref 263 (h1).id 8 (h1).xCen 227 (h1).yCen 131 (h1).rad 165 (h1).xPref 227 (h1).yPref 131 (h1).id 9 (h1).xCen 14 (h1).yCen 131 (h1).rad 139.5 (h1).xPref 14 (h1).yPref 65 (h1).id 10 (h1).xCen -14 (h1).yCen -131 (h1).rad 165 (h1).xPref -14 (h1).yPref -65 (h1).id 11 (h1).xCen 93 (h1).yCen -131 (h1).rad 139.5 (h1).xPref 93 (h1).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 17 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0910.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 120 2 9 64 3 16 63 4 28 126 5 28 130 6 29 93 7 27 80 8 10 93 9 19 99 10 15 145 11 18 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 47 24 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 38 17 plFiberPlate : adding spectro-photo std with objId = 1140 1 5 320 26 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 35 42 plFiberPlate : adding spectro-photo std with objId = 2333 0 2 40 59 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 48 2 plFiberPlate : adding spectro-photo std with objId = 1140 1 3 319 15 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 44 55 plFiberPlate : 90 possible sky positions to use as objects from a possible 575. plFiberPlate : 53 possible sky positions to use as objects from a possible 574. plFiberPlate : 31 possible sky positions to use as objects from a possible 573. plFiberPlate : 29 possible sky positions to use as objects from a possible 572. plFiberPlate : 42 possible sky positions to use as objects from a possible 571. plFiberPlate : 35 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 69 possible sky positions to use as objects from a possible 568. plFiberPlate : 43 possible sky positions to use as objects from a possible 567. plFiberPlate : 20 possible sky positions to use as objects from a possible 566. plFiberPlate : 12 possible sky positions to use as objects from a possible 565. plFiberPlate : 23 possible sky positions to use as objects from a possible 564. plFiberPlate : 24 possible sky positions to use as objects from a possible 563. plFiberPlate : 9 possible sky positions to use as objects from a possible 562. plFiberPlate : 12 possible sky positions to use as objects from a possible 561. plFiberPlate : 17 possible sky positions to use as objects from a possible 560. plFiberPlate : 52 possible sky positions to use as objects from a possible 559. plFiberPlate : 22 possible sky positions to use as objects from a possible 558. plFiberPlate : 10 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 4 possible sky positions to use as objects from a possible 555. plFiberPlate : 2 possible sky positions to use as objects from a possible 554. plFiberPlate : 4 possible sky positions to use as objects from a possible 553. plFiberPlate : 4 possible sky positions to use as objects from a possible 552. plFiberPlate : 20 possible sky positions to use as objects from a possible 551. plFiberPlate : 34 possible sky positions to use as objects from a possible 550. plFiberPlate : 26 possible sky positions to use as objects from a possible 549. plFiberPlate : 18 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 1 possible sky positions to use as objects from a possible 545. plFiberPlate : 10 possible sky positions to use as objects from a possible 544. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0910.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0910.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0911.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 111 2 13 61 3 15 59 4 19 101 5 18 107 6 22 100 7 20 87 8 16 101 9 13 109 10 30 138 11 27 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 53 35 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 59 9 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 49 34 plFiberPlate : adding spectro-photo std with objId = 2333 0 3 49 47 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 35 42 plFiberPlate : adding spectro-photo std with objId = 2333 0 1 49 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 48 2 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 44 55 plFiberPlate : 123 possible sky positions to use as objects from a possible 550. plFiberPlate : 84 possible sky positions to use as objects from a possible 549. plFiberPlate : 24 possible sky positions to use as objects from a possible 548. plFiberPlate : 28 possible sky positions to use as objects from a possible 547. plFiberPlate : 21 possible sky positions to use as objects from a possible 546. plFiberPlate : 17 possible sky positions to use as objects from a possible 545. plFiberPlate : 47 possible sky positions to use as objects from a possible 544. plFiberPlate : 72 possible sky positions to use as objects from a possible 543. plFiberPlate : 63 possible sky positions to use as objects from a possible 542. plFiberPlate : 45 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 22 possible sky positions to use as objects from a possible 539. plFiberPlate : 25 possible sky positions to use as objects from a possible 538. plFiberPlate : 13 possible sky positions to use as objects from a possible 537. plFiberPlate : 15 possible sky positions to use as objects from a possible 536. plFiberPlate : 11 possible sky positions to use as objects from a possible 535. plFiberPlate : 44 possible sky positions to use as objects from a possible 534. plFiberPlate : 32 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 8 possible sky positions to use as objects from a possible 530. plFiberPlate : 12 possible sky positions to use as objects from a possible 529. plFiberPlate : 16 possible sky positions to use as objects from a possible 528. plFiberPlate : 24 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 37 possible sky positions to use as objects from a possible 525. plFiberPlate : 28 possible sky positions to use as objects from a possible 524. plFiberPlate : 24 possible sky positions to use as objects from a possible 523. plFiberPlate : 18 possible sky positions to use as objects from a possible 522. plFiberPlate : 8 possible sky positions to use as objects from a possible 521. plFiberPlate : 3 possible sky positions to use as objects from a possible 520. plFiberPlate : 17 possible sky positions to use as objects from a possible 519. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0910.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0911.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0911.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0912.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 132 2 10 74 3 16 62 4 19 103 5 25 118 6 21 93 7 16 91 8 13 110 9 8 90 10 30 134 11 16 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 61 89 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 53 35 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 59 9 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 49 34 plFiberPlate : adding spectro-photo std with objId = 2333 0 3 53 41 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 64 28 plFiberPlate : adding spectro-photo std with objId = 2333 0 3 56 8 plFiberPlate : adding spectro-photo std with objId = 2333 0 1 49 4 plFiberPlate : 115 possible sky positions to use as objects from a possible 556. plFiberPlate : 85 possible sky positions to use as objects from a possible 555. plFiberPlate : 57 possible sky positions to use as objects from a possible 554. plFiberPlate : 27 possible sky positions to use as objects from a possible 553. plFiberPlate : 24 possible sky positions to use as objects from a possible 552. plFiberPlate : 37 possible sky positions to use as objects from a possible 551. plFiberPlate : 56 possible sky positions to use as objects from a possible 550. plFiberPlate : 72 possible sky positions to use as objects from a possible 549. plFiberPlate : 41 possible sky positions to use as objects from a possible 548. plFiberPlate : 38 possible sky positions to use as objects from a possible 547. plFiberPlate : 17 possible sky positions to use as objects from a possible 546. plFiberPlate : 4 possible sky positions to use as objects from a possible 545. plFiberPlate : 1 possible sky positions to use as objects from a possible 544. plFiberPlate : 30 possible sky positions to use as objects from a possible 543. plFiberPlate : 17 possible sky positions to use as objects from a possible 542. plFiberPlate : 13 possible sky positions to use as objects from a possible 541. plFiberPlate : 61 possible sky positions to use as objects from a possible 540. plFiberPlate : 39 possible sky positions to use as objects from a possible 539. plFiberPlate : 17 possible sky positions to use as objects from a possible 538. plFiberPlate : 4 possible sky positions to use as objects from a possible 537. plFiberPlate : 2 possible sky positions to use as objects from a possible 536. plFiberPlate : 5 possible sky positions to use as objects from a possible 535. plFiberPlate : 7 possible sky positions to use as objects from a possible 534. plFiberPlate : 13 possible sky positions to use as objects from a possible 533. plFiberPlate : 27 possible sky positions to use as objects from a possible 532. plFiberPlate : 25 possible sky positions to use as objects from a possible 531. plFiberPlate : 35 possible sky positions to use as objects from a possible 530. plFiberPlate : 13 possible sky positions to use as objects from a possible 529. plFiberPlate : 14 possible sky positions to use as objects from a possible 528. plFiberPlate : 21 possible sky positions to use as objects from a possible 527. plFiberPlate : 22 possible sky positions to use as objects from a possible 526. plFiberPlate : 18 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0911.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0912.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0912.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0913.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 106 2 15 61 3 9 72 4 17 121 5 15 132 6 22 105 7 20 86 8 19 94 9 22 92 10 24 141 11 21 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 77 61 plFiberPlate : adding spectro-photo std with objId = 2333 0 5 68 20 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 64 28 plFiberPlate : adding spectro-photo std with objId = 2333 0 5 68 2 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 76 38 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 67 28 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 74 31 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 72 8 plFiberPlate : 133 possible sky positions to use as objects from a possible 566. plFiberPlate : 68 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : 19 possible sky positions to use as objects from a possible 562. plFiberPlate : 29 possible sky positions to use as objects from a possible 561. plFiberPlate : 35 possible sky positions to use as objects from a possible 560. plFiberPlate : 90 possible sky positions to use as objects from a possible 559. plFiberPlate : 75 possible sky positions to use as objects from a possible 558. plFiberPlate : 37 possible sky positions to use as objects from a possible 557. plFiberPlate : 13 possible sky positions to use as objects from a possible 556. plFiberPlate : 2 possible sky positions to use as objects from a possible 555. plFiberPlate : 13 possible sky positions to use as objects from a possible 554. plFiberPlate : 19 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 16 possible sky positions to use as objects from a possible 551. plFiberPlate : 77 possible sky positions to use as objects from a possible 550. plFiberPlate : 56 possible sky positions to use as objects from a possible 549. plFiberPlate : 8 possible sky positions to use as objects from a possible 548. plFiberPlate : 4 possible sky positions to use as objects from a possible 547. plFiberPlate : 4 possible sky positions to use as objects from a possible 546. plFiberPlate : 8 possible sky positions to use as objects from a possible 545. plFiberPlate : 4 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 44 possible sky positions to use as objects from a possible 541. plFiberPlate : 25 possible sky positions to use as objects from a possible 540. plFiberPlate : 24 possible sky positions to use as objects from a possible 539. plFiberPlate : 17 possible sky positions to use as objects from a possible 538. plFiberPlate : 11 possible sky positions to use as objects from a possible 537. plFiberPlate : 6 possible sky positions to use as objects from a possible 536. plFiberPlate : 11 possible sky positions to use as objects from a possible 535. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0912.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0913.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0913.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0914.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 109 2 10 57 3 11 68 4 17 104 5 17 120 6 18 95 7 22 86 8 17 91 9 24 87 10 22 128 11 20 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2333 0 2 70 47 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 77 61 plFiberPlate : adding spectro-photo std with objId = 2333 0 5 82 18 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 74 57 plFiberPlate : adding spectro-photo std with objId = 2333 0 4 85 6 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 83 45 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 76 38 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 93 26 plFiberPlate : 101 possible sky positions to use as objects from a possible 538. plFiberPlate : 74 possible sky positions to use as objects from a possible 537. plFiberPlate : 40 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 20 possible sky positions to use as objects from a possible 534. plFiberPlate : 22 possible sky positions to use as objects from a possible 533. plFiberPlate : 36 possible sky positions to use as objects from a possible 532. plFiberPlate : 67 possible sky positions to use as objects from a possible 531. plFiberPlate : 31 possible sky positions to use as objects from a possible 530. plFiberPlate : 16 possible sky positions to use as objects from a possible 529. plFiberPlate : 17 possible sky positions to use as objects from a possible 528. plFiberPlate : 8 possible sky positions to use as objects from a possible 527. plFiberPlate : 8 possible sky positions to use as objects from a possible 526. plFiberPlate : 8 possible sky positions to use as objects from a possible 525. plFiberPlate : 12 possible sky positions to use as objects from a possible 524. plFiberPlate : 29 possible sky positions to use as objects from a possible 523. plFiberPlate : 57 possible sky positions to use as objects from a possible 522. plFiberPlate : 33 possible sky positions to use as objects from a possible 521. plFiberPlate : 16 possible sky positions to use as objects from a possible 520. plFiberPlate : 9 possible sky positions to use as objects from a possible 519. plFiberPlate : 11 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 8 possible sky positions to use as objects from a possible 516. plFiberPlate : 10 possible sky positions to use as objects from a possible 515. plFiberPlate : 10 possible sky positions to use as objects from a possible 514. plFiberPlate : 51 possible sky positions to use as objects from a possible 513. plFiberPlate : 33 possible sky positions to use as objects from a possible 512. plFiberPlate : 12 possible sky positions to use as objects from a possible 511. plFiberPlate : 20 possible sky positions to use as objects from a possible 510. plFiberPlate : 19 possible sky positions to use as objects from a possible 509. plFiberPlate : 4 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0913.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0914.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0914.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0915.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 111 2 13 48 3 19 58 4 18 107 5 18 103 6 18 94 7 20 82 8 13 100 9 23 94 10 22 120 11 16 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 104 118 plFiberPlate : adding spectro-photo std with objId = 2333 0 2 95 22 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 98 15 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 89 4 plFiberPlate : adding spectro-photo std with objId = 2333 0 3 102 32 plFiberPlate : adding spectro-photo std with objId = 2333 0 5 101 20 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 93 26 plFiberPlate : adding spectro-photo std with objId = 2333 0 4 90 25 plFiberPlate : 106 possible sky positions to use as objects from a possible 519. plFiberPlate : 54 possible sky positions to use as objects from a possible 518. plFiberPlate : 37 possible sky positions to use as objects from a possible 517. plFiberPlate : 29 possible sky positions to use as objects from a possible 516. plFiberPlate : 26 possible sky positions to use as objects from a possible 515. plFiberPlate : 22 possible sky positions to use as objects from a possible 514. plFiberPlate : 31 possible sky positions to use as objects from a possible 513. plFiberPlate : 78 possible sky positions to use as objects from a possible 512. plFiberPlate : 54 possible sky positions to use as objects from a possible 511. plFiberPlate : 29 possible sky positions to use as objects from a possible 510. plFiberPlate : 19 possible sky positions to use as objects from a possible 509. plFiberPlate : 14 possible sky positions to use as objects from a possible 508. plFiberPlate : 14 possible sky positions to use as objects from a possible 507. plFiberPlate : 8 possible sky positions to use as objects from a possible 506. plFiberPlate : 30 possible sky positions to use as objects from a possible 505. plFiberPlate : 18 possible sky positions to use as objects from a possible 504. plFiberPlate : 62 possible sky positions to use as objects from a possible 503. plFiberPlate : 51 possible sky positions to use as objects from a possible 502. plFiberPlate : 31 possible sky positions to use as objects from a possible 501. plFiberPlate : 19 possible sky positions to use as objects from a possible 500. plFiberPlate : 15 possible sky positions to use as objects from a possible 499. plFiberPlate : 1 possible sky positions to use as objects from a possible 498. plFiberPlate : 11 possible sky positions to use as objects from a possible 497. plFiberPlate : 28 possible sky positions to use as objects from a possible 496. plFiberPlate : 13 possible sky positions to use as objects from a possible 495. plFiberPlate : 31 possible sky positions to use as objects from a possible 494. plFiberPlate : 18 possible sky positions to use as objects from a possible 493. plFiberPlate : 11 possible sky positions to use as objects from a possible 492. plFiberPlate : 20 possible sky positions to use as objects from a possible 491. plFiberPlate : 14 possible sky positions to use as objects from a possible 490. plFiberPlate : 12 possible sky positions to use as objects from a possible 489. plFiberPlate : 10 possible sky positions to use as objects from a possible 488. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0914.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0915.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0915.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0916.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 112 2 10 67 3 11 63 4 12 113 5 19 101 6 27 84 7 24 99 8 12 106 9 11 96 10 20 139 11 21 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2333 0 2 101 2 plFiberPlate : adding spectro-photo std with objId = 2333 0 2 113 44 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 111 84 plFiberPlate : adding spectro-photo std with objId = 2333 0 6 108 31 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 118 46 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 115 43 plFiberPlate : adding spectro-photo std with objId = 2333 0 5 104 18 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 120 41 plFiberPlate : 119 possible sky positions to use as objects from a possible 559. plFiberPlate : 77 possible sky positions to use as objects from a possible 558. plFiberPlate : 44 possible sky positions to use as objects from a possible 557. plFiberPlate : 28 possible sky positions to use as objects from a possible 556. plFiberPlate : 24 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 48 possible sky positions to use as objects from a possible 553. plFiberPlate : 80 possible sky positions to use as objects from a possible 552. plFiberPlate : 41 possible sky positions to use as objects from a possible 551. plFiberPlate : 20 possible sky positions to use as objects from a possible 550. plFiberPlate : 17 possible sky positions to use as objects from a possible 549. plFiberPlate : 6 possible sky positions to use as objects from a possible 548. plFiberPlate : 5 possible sky positions to use as objects from a possible 547. plFiberPlate : 16 possible sky positions to use as objects from a possible 546. plFiberPlate : 17 possible sky positions to use as objects from a possible 545. plFiberPlate : 25 possible sky positions to use as objects from a possible 544. plFiberPlate : 51 possible sky positions to use as objects from a possible 543. plFiberPlate : 34 possible sky positions to use as objects from a possible 542. plFiberPlate : 21 possible sky positions to use as objects from a possible 541. plFiberPlate : 18 possible sky positions to use as objects from a possible 540. plFiberPlate : 16 possible sky positions to use as objects from a possible 539. plFiberPlate : 15 possible sky positions to use as objects from a possible 538. plFiberPlate : 12 possible sky positions to use as objects from a possible 537. plFiberPlate : 14 possible sky positions to use as objects from a possible 536. plFiberPlate : 24 possible sky positions to use as objects from a possible 535. plFiberPlate : 38 possible sky positions to use as objects from a possible 534. plFiberPlate : 27 possible sky positions to use as objects from a possible 533. plFiberPlate : 12 possible sky positions to use as objects from a possible 532. plFiberPlate : 3 possible sky positions to use as objects from a possible 531. plFiberPlate : 17 possible sky positions to use as objects from a possible 530. plFiberPlate : 6 possible sky positions to use as objects from a possible 529. plFiberPlate : 12 possible sky positions to use as objects from a possible 528. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0915.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0916.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0916.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0917.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 96 2 11 33 3 11 36 4 24 94 5 14 111 6 18 98 7 17 87 8 9 94 9 14 89 10 22 96 11 15 72 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 45 24 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 131 47 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 129 97 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 129 49 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 118 46 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 126 44 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 131 33 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 120 41 plFiberPlate : 93 possible sky positions to use as objects from a possible 491. plFiberPlate : 45 possible sky positions to use as objects from a possible 490. plFiberPlate : 19 possible sky positions to use as objects from a possible 489. plFiberPlate : 13 possible sky positions to use as objects from a possible 488. plFiberPlate : 16 possible sky positions to use as objects from a possible 487. plFiberPlate : 26 possible sky positions to use as objects from a possible 486. plFiberPlate : 40 possible sky positions to use as objects from a possible 485. plFiberPlate : 52 possible sky positions to use as objects from a possible 484. plFiberPlate : 41 possible sky positions to use as objects from a possible 483. plFiberPlate : 20 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : 9 possible sky positions to use as objects from a possible 479. plFiberPlate : 17 possible sky positions to use as objects from a possible 478. plFiberPlate : 17 possible sky positions to use as objects from a possible 477. plFiberPlate : 11 possible sky positions to use as objects from a possible 476. plFiberPlate : 55 possible sky positions to use as objects from a possible 475. plFiberPlate : 30 possible sky positions to use as objects from a possible 474. plFiberPlate : 17 possible sky positions to use as objects from a possible 473. plFiberPlate : 8 possible sky positions to use as objects from a possible 472. plFiberPlate : 5 possible sky positions to use as objects from a possible 471. plFiberPlate : 12 possible sky positions to use as objects from a possible 470. plFiberPlate : 10 possible sky positions to use as objects from a possible 469. plFiberPlate : 13 possible sky positions to use as objects from a possible 468. plFiberPlate : 20 possible sky positions to use as objects from a possible 467. plFiberPlate : 48 possible sky positions to use as objects from a possible 466. plFiberPlate : 37 possible sky positions to use as objects from a possible 465. plFiberPlate : 30 possible sky positions to use as objects from a possible 464. plFiberPlate : 19 possible sky positions to use as objects from a possible 463. plFiberPlate : 14 possible sky positions to use as objects from a possible 462. plFiberPlate : 12 possible sky positions to use as objects from a possible 461. plFiberPlate : 19 possible sky positions to use as objects from a possible 460. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0916.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0917.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0917.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0918.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 100 2 10 54 3 9 55 4 16 99 5 22 120 6 25 94 7 18 94 8 10 114 9 18 104 10 24 105 11 24 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 51 39 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 56 26 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 142 55 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 48 21 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 49 53 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 149 32 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 146 67 plFiberPlate : adding spectro-photo std with objId = 2379 0 6 56 21 plFiberPlate : 98 possible sky positions to use as objects from a possible 529. plFiberPlate : 37 possible sky positions to use as objects from a possible 528. plFiberPlate : 27 possible sky positions to use as objects from a possible 527. plFiberPlate : 7 possible sky positions to use as objects from a possible 526. plFiberPlate : 22 possible sky positions to use as objects from a possible 525. plFiberPlate : 20 possible sky positions to use as objects from a possible 524. plFiberPlate : 56 possible sky positions to use as objects from a possible 523. plFiberPlate : 61 possible sky positions to use as objects from a possible 522. plFiberPlate : 26 possible sky positions to use as objects from a possible 521. plFiberPlate : 10 possible sky positions to use as objects from a possible 520. plFiberPlate : 3 possible sky positions to use as objects from a possible 519. plFiberPlate : 2 possible sky positions to use as objects from a possible 518. plFiberPlate : 11 possible sky positions to use as objects from a possible 517. plFiberPlate : 6 possible sky positions to use as objects from a possible 516. plFiberPlate : 24 possible sky positions to use as objects from a possible 515. plFiberPlate : 14 possible sky positions to use as objects from a possible 514. plFiberPlate : 56 possible sky positions to use as objects from a possible 513. plFiberPlate : 34 possible sky positions to use as objects from a possible 512. plFiberPlate : 13 possible sky positions to use as objects from a possible 511. plFiberPlate : 12 possible sky positions to use as objects from a possible 510. plFiberPlate : 5 possible sky positions to use as objects from a possible 509. plFiberPlate : 3 possible sky positions to use as objects from a possible 508. plFiberPlate : 17 possible sky positions to use as objects from a possible 507. plFiberPlate : 9 possible sky positions to use as objects from a possible 506. plFiberPlate : 18 possible sky positions to use as objects from a possible 505. plFiberPlate : 36 possible sky positions to use as objects from a possible 504. plFiberPlate : 23 possible sky positions to use as objects from a possible 503. plFiberPlate : 32 possible sky positions to use as objects from a possible 502. plFiberPlate : 21 possible sky positions to use as objects from a possible 501. plFiberPlate : 25 possible sky positions to use as objects from a possible 500. plFiberPlate : 22 possible sky positions to use as objects from a possible 499. plFiberPlate : 9 possible sky positions to use as objects from a possible 498. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0917.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0918.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0918.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0919.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 102 2 6 46 3 5 57 4 21 106 5 24 124 6 30 89 7 28 86 8 23 92 9 21 91 10 16 104 11 13 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 161 12 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 70 37 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 153 45 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 67 17 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 75 63 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 149 32 plFiberPlate : adding spectro-photo std with objId = 2379 0 6 68 55 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 146 67 plFiberPlate : 115 possible sky positions to use as objects from a possible 503. plFiberPlate : 71 possible sky positions to use as objects from a possible 502. plFiberPlate : 34 possible sky positions to use as objects from a possible 501. plFiberPlate : 15 possible sky positions to use as objects from a possible 500. plFiberPlate : 18 possible sky positions to use as objects from a possible 499. plFiberPlate : 33 possible sky positions to use as objects from a possible 498. plFiberPlate : 40 possible sky positions to use as objects from a possible 497. plFiberPlate : 64 possible sky positions to use as objects from a possible 496. plFiberPlate : 44 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 5 possible sky positions to use as objects from a possible 493. plFiberPlate : 15 possible sky positions to use as objects from a possible 492. plFiberPlate : 7 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 11 possible sky positions to use as objects from a possible 489. plFiberPlate : 18 possible sky positions to use as objects from a possible 488. plFiberPlate : 52 possible sky positions to use as objects from a possible 487. plFiberPlate : 45 possible sky positions to use as objects from a possible 486. plFiberPlate : 20 possible sky positions to use as objects from a possible 485. plFiberPlate : 9 possible sky positions to use as objects from a possible 484. plFiberPlate : 9 possible sky positions to use as objects from a possible 483. plFiberPlate : 7 possible sky positions to use as objects from a possible 482. plFiberPlate : 7 possible sky positions to use as objects from a possible 481. plFiberPlate : 11 possible sky positions to use as objects from a possible 480. plFiberPlate : 12 possible sky positions to use as objects from a possible 479. plFiberPlate : 43 possible sky positions to use as objects from a possible 478. plFiberPlate : 29 possible sky positions to use as objects from a possible 477. plFiberPlate : 20 possible sky positions to use as objects from a possible 476. plFiberPlate : 2 possible sky positions to use as objects from a possible 475. plFiberPlate : 22 possible sky positions to use as objects from a possible 474. plFiberPlate : 18 possible sky positions to use as objects from a possible 473. plFiberPlate : 5 possible sky positions to use as objects from a possible 472. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0918.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0919.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0919.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0920.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 87 2 7 40 3 8 53 4 17 96 5 17 105 6 17 82 7 12 87 8 13 97 9 12 93 10 17 109 11 10 78 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2379 0 6 86 27 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 79 9 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 161 12 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 85 37 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 75 63 plFiberPlate : adding spectro-photo std with objId = 2379 0 6 77 32 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 89 39 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 88 20 plFiberPlate : 110 possible sky positions to use as objects from a possible 492. plFiberPlate : 58 possible sky positions to use as objects from a possible 491. plFiberPlate : 26 possible sky positions to use as objects from a possible 490. plFiberPlate : 11 possible sky positions to use as objects from a possible 489. plFiberPlate : 27 possible sky positions to use as objects from a possible 488. plFiberPlate : 28 possible sky positions to use as objects from a possible 487. plFiberPlate : 15 possible sky positions to use as objects from a possible 486. plFiberPlate : 59 possible sky positions to use as objects from a possible 485. plFiberPlate : 40 possible sky positions to use as objects from a possible 484. plFiberPlate : 19 possible sky positions to use as objects from a possible 483. plFiberPlate : 8 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 6 possible sky positions to use as objects from a possible 480. plFiberPlate : 12 possible sky positions to use as objects from a possible 479. plFiberPlate : 1 possible sky positions to use as objects from a possible 478. plFiberPlate : 16 possible sky positions to use as objects from a possible 477. plFiberPlate : 55 possible sky positions to use as objects from a possible 476. plFiberPlate : 33 possible sky positions to use as objects from a possible 475. plFiberPlate : 21 possible sky positions to use as objects from a possible 474. plFiberPlate : 10 possible sky positions to use as objects from a possible 473. plFiberPlate : 6 possible sky positions to use as objects from a possible 472. plFiberPlate : 5 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 23 possible sky positions to use as objects from a possible 469. plFiberPlate : 18 possible sky positions to use as objects from a possible 468. plFiberPlate : 45 possible sky positions to use as objects from a possible 467. plFiberPlate : 26 possible sky positions to use as objects from a possible 466. plFiberPlate : 6 possible sky positions to use as objects from a possible 465. plFiberPlate : 22 possible sky positions to use as objects from a possible 464. plFiberPlate : 2 possible sky positions to use as objects from a possible 463. plFiberPlate : 10 possible sky positions to use as objects from a possible 462. plFiberPlate : 6 possible sky positions to use as objects from a possible 461. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0919.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0920.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0920.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0921.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 98 2 2 42 3 5 43 4 11 84 5 16 117 6 20 92 7 20 94 8 19 97 9 17 101 10 20 111 11 13 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 1 194 78 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 195 29 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 104 25 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 191 65 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 187 4 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 88 20 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 89 39 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 182 18 plFiberPlate : 99 possible sky positions to use as objects from a possible 503. plFiberPlate : 70 possible sky positions to use as objects from a possible 502. plFiberPlate : 54 possible sky positions to use as objects from a possible 501. plFiberPlate : 42 possible sky positions to use as objects from a possible 500. plFiberPlate : 18 possible sky positions to use as objects from a possible 499. plFiberPlate : 43 possible sky positions to use as objects from a possible 498. plFiberPlate : 25 possible sky positions to use as objects from a possible 497. plFiberPlate : 62 possible sky positions to use as objects from a possible 496. plFiberPlate : 37 possible sky positions to use as objects from a possible 495. plFiberPlate : 27 possible sky positions to use as objects from a possible 494. plFiberPlate : 18 possible sky positions to use as objects from a possible 493. plFiberPlate : 8 possible sky positions to use as objects from a possible 492. plFiberPlate : 8 possible sky positions to use as objects from a possible 491. plFiberPlate : 13 possible sky positions to use as objects from a possible 490. plFiberPlate : 29 possible sky positions to use as objects from a possible 489. plFiberPlate : 8 possible sky positions to use as objects from a possible 488. plFiberPlate : 50 possible sky positions to use as objects from a possible 487. plFiberPlate : 35 possible sky positions to use as objects from a possible 486. plFiberPlate : 19 possible sky positions to use as objects from a possible 485. plFiberPlate : 10 possible sky positions to use as objects from a possible 484. plFiberPlate : 11 possible sky positions to use as objects from a possible 483. plFiberPlate : 19 possible sky positions to use as objects from a possible 482. plFiberPlate : 9 possible sky positions to use as objects from a possible 481. plFiberPlate : 5 possible sky positions to use as objects from a possible 480. plFiberPlate : 22 possible sky positions to use as objects from a possible 479. plFiberPlate : 35 possible sky positions to use as objects from a possible 478. plFiberPlate : 44 possible sky positions to use as objects from a possible 477. plFiberPlate : 25 possible sky positions to use as objects from a possible 476. plFiberPlate : 11 possible sky positions to use as objects from a possible 475. plFiberPlate : 28 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 9 possible sky positions to use as objects from a possible 472. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0920.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0921.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0921.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0922.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 74 2 5 35 3 6 42 4 16 79 5 26 120 6 29 106 7 26 88 8 17 96 9 17 107 10 21 99 11 14 72 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 110 53 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 204 31 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 196 23 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 112 81 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 115 129 plFiberPlate : adding spectro-photo std with objId = 2334 0 3 200 112 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 121 39 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 202 76 plFiberPlate : 89 possible sky positions to use as objects from a possible 479. plFiberPlate : 50 possible sky positions to use as objects from a possible 478. plFiberPlate : 42 possible sky positions to use as objects from a possible 477. plFiberPlate : 24 possible sky positions to use as objects from a possible 476. plFiberPlate : 25 possible sky positions to use as objects from a possible 475. plFiberPlate : 15 possible sky positions to use as objects from a possible 474. plFiberPlate : 32 possible sky positions to use as objects from a possible 473. plFiberPlate : 60 possible sky positions to use as objects from a possible 472. plFiberPlate : 44 possible sky positions to use as objects from a possible 471. plFiberPlate : 29 possible sky positions to use as objects from a possible 470. plFiberPlate : 20 possible sky positions to use as objects from a possible 469. plFiberPlate : 11 possible sky positions to use as objects from a possible 468. plFiberPlate : 7 possible sky positions to use as objects from a possible 467. plFiberPlate : 12 possible sky positions to use as objects from a possible 466. plFiberPlate : 8 possible sky positions to use as objects from a possible 465. plFiberPlate : 10 possible sky positions to use as objects from a possible 464. plFiberPlate : 53 possible sky positions to use as objects from a possible 463. plFiberPlate : 24 possible sky positions to use as objects from a possible 462. plFiberPlate : 22 possible sky positions to use as objects from a possible 461. plFiberPlate : 10 possible sky positions to use as objects from a possible 460. plFiberPlate : 11 possible sky positions to use as objects from a possible 459. plFiberPlate : 5 possible sky positions to use as objects from a possible 458. plFiberPlate : 19 possible sky positions to use as objects from a possible 457. plFiberPlate : 7 possible sky positions to use as objects from a possible 456. plFiberPlate : 11 possible sky positions to use as objects from a possible 455. plFiberPlate : 50 possible sky positions to use as objects from a possible 454. plFiberPlate : 34 possible sky positions to use as objects from a possible 453. plFiberPlate : 30 possible sky positions to use as objects from a possible 452. plFiberPlate : 9 possible sky positions to use as objects from a possible 451. plFiberPlate : 4 possible sky positions to use as objects from a possible 450. plFiberPlate : 13 possible sky positions to use as objects from a possible 449. plFiberPlate : 15 possible sky positions to use as objects from a possible 448. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0921.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0922.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0922.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0923.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 62 2 3 18 3 3 28 4 9 80 5 16 136 6 27 99 7 13 84 8 5 83 9 12 90 10 17 83 11 9 57 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 214 162 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 136 11 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 125 24 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 134 15 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 133 54 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 217 17 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 121 39 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 124 95 plFiberPlate : 86 possible sky positions to use as objects from a possible 455. plFiberPlate : 51 possible sky positions to use as objects from a possible 454. plFiberPlate : 33 possible sky positions to use as objects from a possible 453. plFiberPlate : 33 possible sky positions to use as objects from a possible 452. plFiberPlate : 7 possible sky positions to use as objects from a possible 451. plFiberPlate : 8 possible sky positions to use as objects from a possible 450. plFiberPlate : 30 possible sky positions to use as objects from a possible 449. plFiberPlate : 47 possible sky positions to use as objects from a possible 448. plFiberPlate : 30 possible sky positions to use as objects from a possible 447. plFiberPlate : 16 possible sky positions to use as objects from a possible 446. plFiberPlate : 10 possible sky positions to use as objects from a possible 445. plFiberPlate : 15 possible sky positions to use as objects from a possible 444. plFiberPlate : 3 possible sky positions to use as objects from a possible 443. plFiberPlate : 5 possible sky positions to use as objects from a possible 442. plFiberPlate : 6 possible sky positions to use as objects from a possible 441. plFiberPlate : 12 possible sky positions to use as objects from a possible 440. plFiberPlate : 49 possible sky positions to use as objects from a possible 439. plFiberPlate : 28 possible sky positions to use as objects from a possible 438. plFiberPlate : 8 possible sky positions to use as objects from a possible 437. plFiberPlate : 2 possible sky positions to use as objects from a possible 436. plFiberPlate : 5 possible sky positions to use as objects from a possible 435. plFiberPlate : 8 possible sky positions to use as objects from a possible 434. plFiberPlate : 4 possible sky positions to use as objects from a possible 433. plFiberPlate : 9 possible sky positions to use as objects from a possible 432. plFiberPlate : 19 possible sky positions to use as objects from a possible 431. plFiberPlate : 57 possible sky positions to use as objects from a possible 430. plFiberPlate : 13 possible sky positions to use as objects from a possible 429. plFiberPlate : 9 possible sky positions to use as objects from a possible 428. plFiberPlate : 14 possible sky positions to use as objects from a possible 427. plFiberPlate : 5 possible sky positions to use as objects from a possible 426. plFiberPlate : 2 possible sky positions to use as objects from a possible 425. plFiberPlate : 1 possible sky positions to use as objects from a possible 424. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0922.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0923.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0923.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0924.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 82 2 2 32 3 3 36 4 8 77 5 22 111 6 29 91 7 22 84 8 13 91 9 14 97 10 13 104 11 8 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 239 160 plFiberPlate : adding spectro-photo std with objId = 2334 0 5 241 155 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 138 22 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 138 165 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 145 41 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 145 66 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 149 73 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 153 72 plFiberPlate : 92 possible sky positions to use as objects from a possible 453. plFiberPlate : 61 possible sky positions to use as objects from a possible 452. plFiberPlate : 35 possible sky positions to use as objects from a possible 451. plFiberPlate : 37 possible sky positions to use as objects from a possible 450. plFiberPlate : 16 possible sky positions to use as objects from a possible 449. plFiberPlate : 12 possible sky positions to use as objects from a possible 448. plFiberPlate : 26 possible sky positions to use as objects from a possible 447. plFiberPlate : 33 possible sky positions to use as objects from a possible 446. plFiberPlate : 30 possible sky positions to use as objects from a possible 445. plFiberPlate : 24 possible sky positions to use as objects from a possible 444. plFiberPlate : 15 possible sky positions to use as objects from a possible 443. plFiberPlate : 5 possible sky positions to use as objects from a possible 442. plFiberPlate : 7 possible sky positions to use as objects from a possible 441. plFiberPlate : 8 possible sky positions to use as objects from a possible 440. plFiberPlate : 12 possible sky positions to use as objects from a possible 439. plFiberPlate : 15 possible sky positions to use as objects from a possible 438. plFiberPlate : 50 possible sky positions to use as objects from a possible 437. plFiberPlate : 39 possible sky positions to use as objects from a possible 436. plFiberPlate : 27 possible sky positions to use as objects from a possible 435. plFiberPlate : 12 possible sky positions to use as objects from a possible 434. plFiberPlate : 6 possible sky positions to use as objects from a possible 433. plFiberPlate : 8 possible sky positions to use as objects from a possible 432. plFiberPlate : 10 possible sky positions to use as objects from a possible 431. plFiberPlate : 10 possible sky positions to use as objects from a possible 430. plFiberPlate : 11 possible sky positions to use as objects from a possible 429. plFiberPlate : 37 possible sky positions to use as objects from a possible 428. plFiberPlate : 44 possible sky positions to use as objects from a possible 427. plFiberPlate : 39 possible sky positions to use as objects from a possible 426. plFiberPlate : 18 possible sky positions to use as objects from a possible 425. plFiberPlate : 22 possible sky positions to use as objects from a possible 424. plFiberPlate : 21 possible sky positions to use as objects from a possible 423. plFiberPlate : 4 possible sky positions to use as objects from a possible 422. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0923.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0924.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0924.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0925.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 57 2 3 18 3 3 29 4 8 77 5 20 109 6 29 101 7 20 94 8 15 92 9 17 93 10 10 71 11 7 46 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 156 140 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 167 61 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 160 82 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 161 219 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 250 71 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 254 233 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 156 43 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 153 72 plFiberPlate : 83 possible sky positions to use as objects from a possible 426. plFiberPlate : 43 possible sky positions to use as objects from a possible 425. plFiberPlate : 27 possible sky positions to use as objects from a possible 424. plFiberPlate : 27 possible sky positions to use as objects from a possible 423. plFiberPlate : 17 possible sky positions to use as objects from a possible 422. plFiberPlate : 12 possible sky positions to use as objects from a possible 421. plFiberPlate : 13 possible sky positions to use as objects from a possible 420. plFiberPlate : 48 possible sky positions to use as objects from a possible 419. plFiberPlate : 20 possible sky positions to use as objects from a possible 418. plFiberPlate : 18 possible sky positions to use as objects from a possible 417. plFiberPlate : 12 possible sky positions to use as objects from a possible 416. plFiberPlate : 6 possible sky positions to use as objects from a possible 415. plFiberPlate : 9 possible sky positions to use as objects from a possible 414. plFiberPlate : 5 possible sky positions to use as objects from a possible 413. plFiberPlate : 2 possible sky positions to use as objects from a possible 412. plFiberPlate : 5 possible sky positions to use as objects from a possible 411. plFiberPlate : 44 possible sky positions to use as objects from a possible 410. plFiberPlate : 12 possible sky positions to use as objects from a possible 409. plFiberPlate : 7 possible sky positions to use as objects from a possible 408. plFiberPlate : 6 possible sky positions to use as objects from a possible 407. plFiberPlate : 4 possible sky positions to use as objects from a possible 406. plFiberPlate : 7 possible sky positions to use as objects from a possible 405. plFiberPlate : 9 possible sky positions to use as objects from a possible 404. plFiberPlate : 5 possible sky positions to use as objects from a possible 403. plFiberPlate : 25 possible sky positions to use as objects from a possible 402. plFiberPlate : 31 possible sky positions to use as objects from a possible 401. plFiberPlate : 58 possible sky positions to use as objects from a possible 400. plFiberPlate : 12 possible sky positions to use as objects from a possible 399. plFiberPlate : 10 possible sky positions to use as objects from a possible 398. plFiberPlate : 12 possible sky positions to use as objects from a possible 397. plFiberPlate : 10 possible sky positions to use as objects from a possible 396. plFiberPlate : 17 possible sky positions to use as objects from a possible 395. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0924.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0925.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0925.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.03.1/plPlugMapP-0926.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 63 2 1 20 3 3 17 4 7 53 5 27 102 6 44 100 7 37 95 8 15 90 9 32 99 10 10 76 11 8 65 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2334 0 2 261 192 plFiberPlate : adding spectro-photo std with objId = 2379 0 2 176 47 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 181 70 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 167 61 plFiberPlate : adding spectro-photo std with objId = 2379 0 5 171 49 plFiberPlate : adding spectro-photo std with objId = 2334 0 4 268 59 plFiberPlate : adding spectro-photo std with objId = 2379 0 4 181 4 plFiberPlate : adding spectro-photo std with objId = 2379 0 3 182 65 plFiberPlate : 66 possible sky positions to use as objects from a possible 408. plFiberPlate : 39 possible sky positions to use as objects from a possible 407. plFiberPlate : 27 possible sky positions to use as objects from a possible 406. plFiberPlate : 18 possible sky positions to use as objects from a possible 405. plFiberPlate : 19 possible sky positions to use as objects from a possible 404. plFiberPlate : 20 possible sky positions to use as objects from a possible 403. plFiberPlate : 38 possible sky positions to use as objects from a possible 402. plFiberPlate : 36 possible sky positions to use as objects from a possible 401. plFiberPlate : 22 possible sky positions to use as objects from a possible 400. plFiberPlate : 15 possible sky positions to use as objects from a possible 399. plFiberPlate : 11 possible sky positions to use as objects from a possible 398. plFiberPlate : 12 possible sky positions to use as objects from a possible 397. plFiberPlate : 14 possible sky positions to use as objects from a possible 396. plFiberPlate : 2 possible sky positions to use as objects from a possible 395. plFiberPlate : 10 possible sky positions to use as objects from a possible 394. plFiberPlate : 8 possible sky positions to use as objects from a possible 393. plFiberPlate : 45 possible sky positions to use as objects from a possible 392. plFiberPlate : 31 possible sky positions to use as objects from a possible 391. plFiberPlate : 23 possible sky positions to use as objects from a possible 390. plFiberPlate : 17 possible sky positions to use as objects from a possible 389. plFiberPlate : 18 possible sky positions to use as objects from a possible 388. plFiberPlate : 9 possible sky positions to use as objects from a possible 387. plFiberPlate : 9 possible sky positions to use as objects from a possible 386. plFiberPlate : 12 possible sky positions to use as objects from a possible 385. plFiberPlate : 5 possible sky positions to use as objects from a possible 384. plFiberPlate : 54 possible sky positions to use as objects from a possible 383. plFiberPlate : 66 possible sky positions to use as objects from a possible 382. plFiberPlate : 41 possible sky positions to use as objects from a possible 381. plFiberPlate : 25 possible sky positions to use as objects from a possible 380. plFiberPlate : 18 possible sky positions to use as objects from a possible 379. plFiberPlate : 36 possible sky positions to use as objects from a possible 378. plFiberPlate : 13 possible sky positions to use as objects from a possible 377. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0925.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0926.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.03.1/plOverlay-0926.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Mar 13 15:27:47 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 17 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0910.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1874,-7.0206) and (-12.45,-0.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0910.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0910.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.0839,11.4745) and (1.33,12.52) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0911.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0911.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.0241,9.8442) and (12.69,-1.07) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0911.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0912.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7671,3.4170) and (12.66,1.80) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0912.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0912.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0913.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0913.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0913.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0914.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0914.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0914.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0915.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.6291,12.1141) and (-0.45,12.74) plMakeFanucCodes : fixed path between (11.9606,3.9415) and (12.47,2.52) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0915.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0915.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0916.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0916.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0916.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0917.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0917.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0917.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0918.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0918.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0918.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0919.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0919.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0919.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0920.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.7932,10.4762) and (2.65,12.45) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0920.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.4389,10.0603) and (11.97,-2.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0920.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0921.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0921.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0921.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0922.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0922.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0922.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0923.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.1475,-3.9031) and (-12.35,-2.30) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0923.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0923.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0924.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7509,-6.9445) and (11.59,-5.05) plMakeFanucCodes : fixed path between (6.4692,10.9526) and (5.35,11.49) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0924.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0924.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0925.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0925.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.4003,9.6271) and (10.37,6.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0925.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0926.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0926.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.03.1/plFanuc-0926.par plMakeFanucCodes : temperature difference 10.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00023152 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Mar 13 15:28:55 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h1).parity 1 (h1).scale 1 (h1).xCenter 0 (h1).yCenter 0 (h1).coeff 0x140e46c68 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 17 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 910 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 911 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 912 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 913 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 914 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 915 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 916 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 917 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 918 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 919 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 920 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 921 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 922 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 923 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 924 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 925 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 926 : (h3).mjd 0 (h3).raCen 0 (h3).decCen 0 (h3).haCen 0 (h3).theta 0 (h3).tempShop 20 (h3).tempObs 9.1 (h3).thermalExpand 2.124e-05 (h3).maxRadius 0 (h3).ZOffset 0 (h3).ZOffsetR 0 (h3).wave 0 (h3).obsPres 0 (h3).obsRH 0 (h3).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Mar 13 15:29:38 CST 2002 Begin running plateEnder dr2002.03.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_7/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v12_23/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v12_23/NULL Executing commands in /sdss/ups/prd/nfcalib/v1_9_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_6/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_6/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc plate reports bad plates Error: plateEnder dr2002.03.1 -morePipes 1 failed. PS: Read file for stderr output of this job.