Sender: LSF System Subject: Job 6354: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Dec 9 15:01:37 2002 Results reported at Mon Dec 9 15:02:44 2002 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #! /bin/sh . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_131 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2002.12.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 55.00 sec. Max Memory : 9 MB Max Swap : 32 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Dec 9 15:01:39 CST 2002 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Dec 9 15:01:41 CST 2002 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_55/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/dp/v14_131/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Mon Dec 9 15:01:41 CST 2002 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_131/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_55/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v0_7/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Mon Dec 9 15:01:41 CST 2002 Begin running plate --------------------------------------------------------------- Mon Dec 9 15:01:41 CST 2002 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e4a968 makePlates : beginning loop over plObs chain; makePlates : making 6 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapT-0634.par makePlates : plateInfo struct for plate 1197 : (h4).mjd 52662 (h4).raCen 127.77 (h4).decCen 35.24828 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.770 35.248 127.770 36.748 plMakePlateFromTile : mjd of obs : 52662.678910 Observed HA/dec of plate center, fiducial point (deg) : -15.002 35.238 -15.003 36.737 The rotation angle of the fid. point is 96.920845 plMakePlateFromTile : beginning loop over 1117 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapT-0637.par makePlates : plateInfo struct for plate 1198 : (h4).mjd 52662 (h4).raCen 134.0553 (h4).decCen 39.42067 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.055 39.421 134.055 40.921 plMakePlateFromTile : mjd of obs : 52662.699095 Observed HA/dec of plate center, fiducial point (deg) : -14.002 39.407 -14.003 40.907 The rotation angle of the fid. point is 116.091993 plMakePlateFromTile : beginning loop over 1106 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapT-0638.par makePlates : plateInfo struct for plate 1199 : (h4).mjd 52662 (h4).raCen 134.9923 (h4).decCen 39.87946 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.992 39.879 134.992 41.379 plMakePlateFromTile : mjd of obs : 52662.701690 Observed HA/dec of plate center, fiducial point (deg) : -14.002 39.866 -14.003 41.365 The rotation angle of the fid. point is 117.834962 plMakePlateFromTile : beginning loop over 1122 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapT-0639.par makePlates : plateInfo struct for plate 1200 : (h4).mjd 52662 (h4).raCen 136.9501 (h4).decCen 41.05503 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.950 41.055 136.950 42.555 plMakePlateFromTile : mjd of obs : 52662.781934 Observed HA/dec of plate center, fiducial point (deg) : 12.998 41.040 12.997 42.540 The rotation angle of the fid. point is -124.387665 plMakePlateFromTile : beginning loop over 1143 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapT-0640.par makePlates : plateInfo struct for plate 1201 : (h4).mjd 52662 (h4).raCen 139.3592 (h4).decCen 42.40504 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.359 42.405 139.359 43.905 plMakePlateFromTile : mjd of obs : 52662.780295 Observed HA/dec of plate center, fiducial point (deg) : 9.998 42.389 9.997 43.889 The rotation angle of the fid. point is -137.303557 plMakePlateFromTile : beginning loop over 1158 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapT-0642.par makePlates : plateInfo struct for plate 1202 : (h4).mjd 52662 (h4).raCen 145.1541 (h4).decCen 45.07933 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 145.154 45.079 145.154 46.579 plMakePlateFromTile : mjd of obs : 52662.779721 Observed HA/dec of plate center, fiducial point (deg) : 3.998 45.061 3.997 46.561 The rotation angle of the fid. point is -164.473211 plMakePlateFromTile : beginning loop over 1152 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Dec 9 15:01:57 CST 2002 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 6 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapP-1197.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 63 2 4 49 3 9 76 4 8 102 5 2 56 6 1 36 7 5 69 8 17 96 9 11 106 10 24 131 11 14 81 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 134 115 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 134 12 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 141 35 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 143 72 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 141 119 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 132 14 plFiberPlate : adding spectro-photo std with objId = 2830 0 3 124 6 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 127 106 plFiberPlate : 120 possible sky positions to use as objects from a possible 420. plFiberPlate : 82 possible sky positions to use as objects from a possible 419. plFiberPlate : 66 possible sky positions to use as objects from a possible 418. plFiberPlate : 40 possible sky positions to use as objects from a possible 417. plFiberPlate : 36 possible sky positions to use as objects from a possible 416. plFiberPlate : 20 possible sky positions to use as objects from a possible 415. plFiberPlate : 48 possible sky positions to use as objects from a possible 414. plFiberPlate : 44 possible sky positions to use as objects from a possible 413. plFiberPlate : 36 possible sky positions to use as objects from a possible 412. plFiberPlate : 18 possible sky positions to use as objects from a possible 411. plFiberPlate : 12 possible sky positions to use as objects from a possible 410. plFiberPlate : 4 possible sky positions to use as objects from a possible 409. plFiberPlate : 13 possible sky positions to use as objects from a possible 408. plFiberPlate : 8 possible sky positions to use as objects from a possible 407. plFiberPlate : 12 possible sky positions to use as objects from a possible 406. plFiberPlate : 6 possible sky positions to use as objects from a possible 405. plFiberPlate : 45 possible sky positions to use as objects from a possible 404. plFiberPlate : 33 possible sky positions to use as objects from a possible 403. plFiberPlate : 22 possible sky positions to use as objects from a possible 402. plFiberPlate : 17 possible sky positions to use as objects from a possible 401. plFiberPlate : 7 possible sky positions to use as objects from a possible 400. plFiberPlate : 6 possible sky positions to use as objects from a possible 399. plFiberPlate : 10 possible sky positions to use as objects from a possible 398. plFiberPlate : 12 possible sky positions to use as objects from a possible 397. plFiberPlate : 11 possible sky positions to use as objects from a possible 396. plFiberPlate : 11 possible sky positions to use as objects from a possible 395. plFiberPlate : 7 possible sky positions to use as objects from a possible 394. plFiberPlate : 9 possible sky positions to use as objects from a possible 393. plFiberPlate : 9 possible sky positions to use as objects from a possible 392. plFiberPlate : 13 possible sky positions to use as objects from a possible 391. plFiberPlate : 5 possible sky positions to use as objects from a possible 390. plFiberPlate : 13 possible sky positions to use as objects from a possible 389. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1197.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1197.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapP-1198.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 66 2 4 53 3 8 90 4 7 103 5 2 63 6 1 44 7 6 75 8 8 108 9 5 108 10 9 135 11 7 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 179 43 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 166 22 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 182 16 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 168 43 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 175 19 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 178 31 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 186 117 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 167 15 plFiberPlate : 105 possible sky positions to use as objects from a possible 449. plFiberPlate : 84 possible sky positions to use as objects from a possible 448. plFiberPlate : 63 possible sky positions to use as objects from a possible 447. plFiberPlate : 24 possible sky positions to use as objects from a possible 446. plFiberPlate : 27 possible sky positions to use as objects from a possible 445. plFiberPlate : 19 possible sky positions to use as objects from a possible 444. plFiberPlate : 12 possible sky positions to use as objects from a possible 443. plFiberPlate : 64 possible sky positions to use as objects from a possible 442. plFiberPlate : 38 possible sky positions to use as objects from a possible 441. plFiberPlate : 26 possible sky positions to use as objects from a possible 440. plFiberPlate : 14 possible sky positions to use as objects from a possible 439. plFiberPlate : 9 possible sky positions to use as objects from a possible 438. plFiberPlate : 8 possible sky positions to use as objects from a possible 437. plFiberPlate : 2 possible sky positions to use as objects from a possible 436. plFiberPlate : 9 possible sky positions to use as objects from a possible 435. plFiberPlate : 23 possible sky positions to use as objects from a possible 434. plFiberPlate : 35 possible sky positions to use as objects from a possible 433. plFiberPlate : 34 possible sky positions to use as objects from a possible 432. plFiberPlate : 34 possible sky positions to use as objects from a possible 431. plFiberPlate : 25 possible sky positions to use as objects from a possible 430. plFiberPlate : 12 possible sky positions to use as objects from a possible 429. plFiberPlate : 15 possible sky positions to use as objects from a possible 428. plFiberPlate : 2 possible sky positions to use as objects from a possible 427. plFiberPlate : 3 possible sky positions to use as objects from a possible 426. plFiberPlate : 30 possible sky positions to use as objects from a possible 425. plFiberPlate : 21 possible sky positions to use as objects from a possible 424. plFiberPlate : 18 possible sky positions to use as objects from a possible 423. plFiberPlate : 17 possible sky positions to use as objects from a possible 422. plFiberPlate : 10 possible sky positions to use as objects from a possible 421. plFiberPlate : 10 possible sky positions to use as objects from a possible 420. plFiberPlate : 25 possible sky positions to use as objects from a possible 419. plFiberPlate : 13 possible sky positions to use as objects from a possible 418. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1197.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1198.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1198.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapP-1199.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 80 2 3 39 3 7 71 4 6 93 5 2 71 6 2 52 7 9 89 8 8 113 9 7 103 10 11 127 11 6 77 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 188 69 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 182 31 plFiberPlate : adding spectro-photo std with objId = 2830 0 2 179 43 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 182 16 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 178 43 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 193 20 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 178 31 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 186 117 plFiberPlate : 103 possible sky positions to use as objects from a possible 464. plFiberPlate : 92 possible sky positions to use as objects from a possible 463. plFiberPlate : 77 possible sky positions to use as objects from a possible 462. plFiberPlate : 45 possible sky positions to use as objects from a possible 461. plFiberPlate : 28 possible sky positions to use as objects from a possible 460. plFiberPlate : 16 possible sky positions to use as objects from a possible 459. plFiberPlate : 41 possible sky positions to use as objects from a possible 458. plFiberPlate : 62 possible sky positions to use as objects from a possible 457. plFiberPlate : 52 possible sky positions to use as objects from a possible 456. plFiberPlate : 40 possible sky positions to use as objects from a possible 455. plFiberPlate : 34 possible sky positions to use as objects from a possible 454. plFiberPlate : 16 possible sky positions to use as objects from a possible 453. plFiberPlate : 7 possible sky positions to use as objects from a possible 452. plFiberPlate : 17 possible sky positions to use as objects from a possible 451. plFiberPlate : 21 possible sky positions to use as objects from a possible 450. plFiberPlate : 27 possible sky positions to use as objects from a possible 449. plFiberPlate : 50 possible sky positions to use as objects from a possible 448. plFiberPlate : 37 possible sky positions to use as objects from a possible 447. plFiberPlate : 29 possible sky positions to use as objects from a possible 446. plFiberPlate : 23 possible sky positions to use as objects from a possible 445. plFiberPlate : 22 possible sky positions to use as objects from a possible 444. plFiberPlate : 15 possible sky positions to use as objects from a possible 443. plFiberPlate : 12 possible sky positions to use as objects from a possible 442. plFiberPlate : 17 possible sky positions to use as objects from a possible 441. plFiberPlate : 12 possible sky positions to use as objects from a possible 440. plFiberPlate : 20 possible sky positions to use as objects from a possible 439. plFiberPlate : 12 possible sky positions to use as objects from a possible 438. plFiberPlate : 15 possible sky positions to use as objects from a possible 437. plFiberPlate : 6 possible sky positions to use as objects from a possible 436. plFiberPlate : 13 possible sky positions to use as objects from a possible 435. plFiberPlate : 16 possible sky positions to use as objects from a possible 434. plFiberPlate : 19 possible sky positions to use as objects from a possible 433. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1198.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1199.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1199.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapP-1200.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 74 2 10 60 3 8 97 4 7 126 5 5 67 6 2 39 7 9 72 8 14 91 9 5 92 10 22 151 11 19 80 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 199 6 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 198 23 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 207 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 6 189 79 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 193 20 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 201 37 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 207 33 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 202 20 plFiberPlate : 124 possible sky positions to use as objects from a possible 463. plFiberPlate : 96 possible sky positions to use as objects from a possible 462. plFiberPlate : 56 possible sky positions to use as objects from a possible 461. plFiberPlate : 19 possible sky positions to use as objects from a possible 460. plFiberPlate : 13 possible sky positions to use as objects from a possible 459. plFiberPlate : 41 possible sky positions to use as objects from a possible 458. plFiberPlate : 17 possible sky positions to use as objects from a possible 457. plFiberPlate : 47 possible sky positions to use as objects from a possible 456. plFiberPlate : 46 possible sky positions to use as objects from a possible 455. plFiberPlate : 21 possible sky positions to use as objects from a possible 454. plFiberPlate : 11 possible sky positions to use as objects from a possible 453. plFiberPlate : 5 possible sky positions to use as objects from a possible 452. plFiberPlate : 25 possible sky positions to use as objects from a possible 451. plFiberPlate : 6 possible sky positions to use as objects from a possible 450. plFiberPlate : 8 possible sky positions to use as objects from a possible 449. plFiberPlate : 8 possible sky positions to use as objects from a possible 448. plFiberPlate : 25 possible sky positions to use as objects from a possible 447. plFiberPlate : 25 possible sky positions to use as objects from a possible 446. plFiberPlate : 12 possible sky positions to use as objects from a possible 445. plFiberPlate : 6 possible sky positions to use as objects from a possible 444. plFiberPlate : 7 possible sky positions to use as objects from a possible 443. plFiberPlate : 10 possible sky positions to use as objects from a possible 442. plFiberPlate : 10 possible sky positions to use as objects from a possible 441. plFiberPlate : 9 possible sky positions to use as objects from a possible 440. plFiberPlate : 19 possible sky positions to use as objects from a possible 439. plFiberPlate : 14 possible sky positions to use as objects from a possible 438. plFiberPlate : 7 possible sky positions to use as objects from a possible 437. plFiberPlate : 8 possible sky positions to use as objects from a possible 436. plFiberPlate : 11 possible sky positions to use as objects from a possible 435. plFiberPlate : 7 possible sky positions to use as objects from a possible 434. plFiberPlate : 6 possible sky positions to use as objects from a possible 433. plFiberPlate : 2 possible sky positions to use as objects from a possible 432. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1199.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1200.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1200.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapP-1201.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 84 2 9 67 3 12 87 4 12 100 5 8 72 6 7 47 7 9 85 8 10 99 9 12 108 10 19 140 11 13 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 212 6 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 221 63 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 219 100 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 207 32 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 201 37 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 223 19 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 207 33 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 217 15 plFiberPlate : 98 possible sky positions to use as objects from a possible 473. plFiberPlate : 91 possible sky positions to use as objects from a possible 472. plFiberPlate : 77 possible sky positions to use as objects from a possible 471. plFiberPlate : 33 possible sky positions to use as objects from a possible 470. plFiberPlate : 25 possible sky positions to use as objects from a possible 469. plFiberPlate : 19 possible sky positions to use as objects from a possible 468. plFiberPlate : 57 possible sky positions to use as objects from a possible 467. plFiberPlate : 56 possible sky positions to use as objects from a possible 466. plFiberPlate : 34 possible sky positions to use as objects from a possible 465. plFiberPlate : 19 possible sky positions to use as objects from a possible 464. plFiberPlate : 12 possible sky positions to use as objects from a possible 463. plFiberPlate : 11 possible sky positions to use as objects from a possible 462. plFiberPlate : 17 possible sky positions to use as objects from a possible 461. plFiberPlate : 4 possible sky positions to use as objects from a possible 460. plFiberPlate : 16 possible sky positions to use as objects from a possible 459. plFiberPlate : 12 possible sky positions to use as objects from a possible 458. plFiberPlate : 51 possible sky positions to use as objects from a possible 457. plFiberPlate : 40 possible sky positions to use as objects from a possible 456. plFiberPlate : 32 possible sky positions to use as objects from a possible 455. plFiberPlate : 22 possible sky positions to use as objects from a possible 454. plFiberPlate : 13 possible sky positions to use as objects from a possible 453. plFiberPlate : 16 possible sky positions to use as objects from a possible 452. plFiberPlate : 6 possible sky positions to use as objects from a possible 451. plFiberPlate : 7 possible sky positions to use as objects from a possible 450. plFiberPlate : 7 possible sky positions to use as objects from a possible 449. plFiberPlate : 24 possible sky positions to use as objects from a possible 448. plFiberPlate : 22 possible sky positions to use as objects from a possible 447. plFiberPlate : 27 possible sky positions to use as objects from a possible 446. plFiberPlate : 12 possible sky positions to use as objects from a possible 445. plFiberPlate : 17 possible sky positions to use as objects from a possible 444. plFiberPlate : 12 possible sky positions to use as objects from a possible 443. plFiberPlate : 25 possible sky positions to use as objects from a possible 442. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1200.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1201.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1201.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2002.12.2/plPlugMapP-1202.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 88 2 7 65 3 7 85 4 5 119 5 5 85 6 2 57 7 1 79 8 2 87 9 3 98 10 13 136 11 11 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2830 0 4 239 8 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 246 16 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 255 27 plFiberPlate : adding spectro-photo std with objId = 2864 0 5 253 49 plFiberPlate : adding spectro-photo std with objId = 2864 0 2 240 53 plFiberPlate : adding spectro-photo std with objId = 2864 0 4 251 8 plFiberPlate : adding spectro-photo std with objId = 2864 0 3 244 69 plFiberPlate : adding spectro-photo std with objId = 2864 0 1 251 21 plFiberPlate : 107 possible sky positions to use as objects from a possible 490. plFiberPlate : 79 possible sky positions to use as objects from a possible 489. plFiberPlate : 54 possible sky positions to use as objects from a possible 488. plFiberPlate : 34 possible sky positions to use as objects from a possible 487. plFiberPlate : 29 possible sky positions to use as objects from a possible 486. plFiberPlate : 26 possible sky positions to use as objects from a possible 485. plFiberPlate : 47 possible sky positions to use as objects from a possible 484. plFiberPlate : 78 possible sky positions to use as objects from a possible 483. plFiberPlate : 42 possible sky positions to use as objects from a possible 482. plFiberPlate : 19 possible sky positions to use as objects from a possible 481. plFiberPlate : 10 possible sky positions to use as objects from a possible 480. plFiberPlate : 17 possible sky positions to use as objects from a possible 479. plFiberPlate : 18 possible sky positions to use as objects from a possible 478. plFiberPlate : 5 possible sky positions to use as objects from a possible 477. plFiberPlate : 9 possible sky positions to use as objects from a possible 476. plFiberPlate : 24 possible sky positions to use as objects from a possible 475. plFiberPlate : 49 possible sky positions to use as objects from a possible 474. plFiberPlate : 37 possible sky positions to use as objects from a possible 473. plFiberPlate : 24 possible sky positions to use as objects from a possible 472. plFiberPlate : 7 possible sky positions to use as objects from a possible 471. plFiberPlate : 5 possible sky positions to use as objects from a possible 470. plFiberPlate : 14 possible sky positions to use as objects from a possible 469. plFiberPlate : 12 possible sky positions to use as objects from a possible 468. plFiberPlate : 16 possible sky positions to use as objects from a possible 467. plFiberPlate : 6 possible sky positions to use as objects from a possible 466. plFiberPlate : 40 possible sky positions to use as objects from a possible 465. plFiberPlate : 22 possible sky positions to use as objects from a possible 464. plFiberPlate : 8 possible sky positions to use as objects from a possible 463. plFiberPlate : 40 possible sky positions to use as objects from a possible 462. plFiberPlate : 5 possible sky positions to use as objects from a possible 461. plFiberPlate : 11 possible sky positions to use as objects from a possible 460. plFiberPlate : 8 possible sky positions to use as objects from a possible 459. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1201.ps/CPS Open /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1202.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2002.12.2/plOverlay-1202.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Dec 9 15:02:14 CST 2002 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 6 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1197.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1197.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1197.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1198.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1198.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1198.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1199.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1199.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1199.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1200.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1200.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1200.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1201.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1201.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1201.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1202.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1202.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2002.12.2/plFanuc-1202.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Dec 9 15:02:33 CST 2002 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_131/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_131/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e4b3e8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 6 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1197 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1198 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1199 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1200 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1201 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1202 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Dec 9 15:02:42 CST 2002 ALL DONE PS: Read file for stderr output of this job.