Sender: LSF System Subject: Job 17924: Done Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Feb 3 15:22:28 2003 Results reported at Mon Feb 3 15:26:34 2003 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v14_200 setup plate v3_7 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2003.02.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo Begin running makePlates -verbose=2 plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo Error: makePlates -verbose=2 failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running fiberPlates -verbose=2 -skipBrightCheck plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo Error: fiberPlates -verbose=2 -skipBrightCheck failed. exit 1 fi echo --------------------------------------------------------------- date echo Begin running makeFanuc -verbose=2 plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo Error: makeFanuc -verbose=2 failed. exit 1 (... more ...) ------------------------------------------------------------ Successfully completed. Resource usage summary: CPU time : 211.99 sec. Max Memory : 10 MB Max Swap : 33 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Mon Feb 3 15:22:32 CST 2003 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Feb 3 15:22:40 CST 2003 PATH = /sdss/ups/prd/tclx/v7_4ad/OSF1/bin:/sdss/ups/prd/tk/v4_0d/OSF1/bin:/sdss/ups/prd/tcl/v7_4d/OSF1/bin:/sdss/ups/prd/fsao/v3_14/OSF1/bin:/sdss/ups/prd/ximagetools/v3_0/OSF1/bin:/sdss/ups/prd/rsync/v2_4_6/OSF1/bin:/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1/bin:/sdss/ups/prd/lsf/v4_1/OSF1/bin:/sdss/ups/prd/kentools/v1_4/OSF1/bin:/sdss/ups/prd/ghostscript/v5_50/OSF1-V4/bin:/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4/bin:/sdss/ups/prd/encp/v2_20/OSF1:/fnal/ups/prd/perl/v5_006_1aOSF1-V4/bin:/fnal/ups/prd/ups/v4_6OSF1-V4/bin:/sdss/ups/prd/sm/v2_4_13b/OSF1/bin:/fnal/ups/prd/flpr/v1_12OSF1-V4/bin:/fnal/ups/prd/xemacs/v21_1OSF1-V4/bin:/fnal/ups/prd/ispell/v3_1bOSF1-V4/bin:/sdss/ups/prd/gdb/v4_17/OSF1/bin:/sdss/ups/prd/rcs/v5_7/OSF1-V3/bin:/fnal/ups/prd/diffutils/v2_7OSF1-V4/bin:/fnal/ups/prd/cvs/v1_10OSF1-V4/bin:/fnal/ups/prd/gtools/v2_4bOSF1-V4/bin:/usr/krb5/bin:/usr/local/bin:/usr/ccs/bin:/usr/bin:/usr/sbin:/usr/lbin:/usr/ucb:/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/astrom/v3_6/OSF1/bin:/sdss/ups/prd/lynx/v2_8_1/OSF1-V4/bin:/sdss/ups/prd/mt/v8_0/OSF1/bin:/sdss/ups/prd/photo/v5_3_58/OSF1/bin:/sdss/ups/prd/ssc/v5_3_4/OSF1/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v14_200/NULL/bin:/sdss/ups/prd/fpgplot/v1_7/OSF1/bin:/sdss/ups/prd/pgplot/v5_1_1/OSF1/dst:/sdss/ups/prd/sdsstools/v4_14/OSF1/bin:/sdss/ups/prd/ftcl/v3_3/OSF1/bin:/sdss/ups/prd/dervish/v8_12/OSF1/bin:/sdss/ups/prd/sdssmath/v5_8/OSF1/bin:/sdss/ups/prd/astrotools/v5_10/OSF1/bin:/sdss/ups/prd/plate/v3_7/OSF1/bin --------------------------------------------------------------- Mon Feb 3 15:22:40 CST 2003 ASTROM_DIR=/sdss/ups/prd/astrom/v3_6/OSF1 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_10/OSF1 CVS_DIR=/fnal/ups/prd/cvs/v1_10OSF1-V4 DERVISH_DIR=/sdss/ups/prd/dervish/v8_12/OSF1 DIFFUTILS_DIR=/fnal/ups/prd/diffutils/v2_7OSF1-V4 DP_DIR=/sdss/ups/prd/dp/v14_200/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v2_20/OSF1 FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_2/OSF1 FLPR_DIR=/fnal/ups/prd/flpr/v1_12OSF1-V4 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_7/OSF1 FSAO_DIR=/sdss/ups/prd/fsao/v3_14/OSF1 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/OSF1 FTCL_DIR=/sdss/ups/prd/ftcl/v3_3/OSF1 GDB_DIR=/sdss/ups/prd/gdb/v4_17/OSF1 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/OSF1-V4 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/OSF1-V4 GTOOLS_DIR=/fnal/ups/prd/gtools/v2_4bOSF1-V4 INT_DIR=/sdss/ups/prd/dervish/v8_12/OSF1/doc/www/dervish.home.html ISPELL_DIR=/fnal/ups/prd/ispell/v3_1bOSF1-V4 KTOOLS_DIR=/sdss/ups/prd/kentools/v1_4/OSF1 LAPACK_DIR=/sdss/ups/prd/lapack/v2_0/OSF1 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_2/OSF1 LSF_DIR=/sdss/ups/prd/lsf/v4_1/OSF1 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_1/OSF1-V4 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_4/NULL MT_DIR=/sdss/ups/prd/mt/v8_0/OSF1 NCURSES_DIR=/sdss/ups/prd/ncurses/v1_1/OSF1 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_1/NULL PERL_DIR=/fnal/ups/prd/perl/v5_006_1aOSF1-V4 PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1/OSF1 PHOTO_DIR=/sdss/ups/prd/photo/v5_3_58/OSF1 PLATE_DIR=/sdss/ups/prd/plate/v3_7/OSF1 POSTGRES_DIR=/sdss/ups/prd/postgres/postgresql-6.5.3/OSF1 RCS_DIR=/sdss/ups/prd/rcs/v5_7/OSF1-V3 RSYNC_DIR=/sdss/ups/prd/rsync/v2_4_6/OSF1 SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_8/OSF1 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_14/OSF1 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/OSF1 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/OSF1 SM_DIR=/sdss/ups/prd/sm/v2_4_13b/OSF1 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/OSF1 TCLX_DIR=/sdss/ups/prd/tclx/v7_4ad/OSF1 TCL_DIR=/sdss/ups/prd/tcl/v7_4d/OSF1 TK_DIR=/sdss/ups/prd/tk/v4_0d/OSF1 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_6OSF1-V4 XEMACS_DIR=/fnal/ups/prd/xemacs/v21_1OSF1-V4 XEMACS_PACKAGES_DIR=/fnal/ups/prd/xemacs_packages/v21_1a XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v3_0/OSF1 --------------------------------------------------------------- Kerberos Data: KRB5CCNAME= --------------------------------------------------------------- --------------------------------------------------------------- Mon Feb 3 15:22:41 CST 2003 Begin running plate --------------------------------------------------------------- Mon Feb 3 15:22:41 CST 2003 Begin running makePlates -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_200/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_200/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x140e5c068 makePlates : beginning loop over plObs chain; makePlates : making 15 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0891.par makePlates : plateInfo struct for plate 1263 : (h4).mjd 52959 (h4).raCen 116.9455 (h4).decCen 20.49558 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.945 20.496 116.945 21.996 plMakePlateFromTile : mjd of obs : 52959.804787 Observed HA/dec of plate center, fiducial point (deg) : -26.002 20.492 -26.003 21.991 The rotation angle of the fid. point is 56.666508 plMakePlateFromTile : beginning loop over 1133 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0892.par makePlates : plateInfo struct for plate 1264 : (h4).mjd 52959 (h4).raCen 119.4225 (h4).decCen 22.38134 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.423 22.381 119.423 23.881 plMakePlateFromTile : mjd of obs : 52959.803337 Observed HA/dec of plate center, fiducial point (deg) : -29.002 22.376 -29.003 23.876 The rotation angle of the fid. point is 61.586239 plMakePlateFromTile : beginning loop over 1155 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0893.par makePlates : plateInfo struct for plate 1265 : (h4).mjd 52959 (h4).raCen 121.8184 (h4).decCen 24.22824 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.818 24.228 121.818 25.728 plMakePlateFromTile : mjd of obs : 52959.804433 Observed HA/dec of plate center, fiducial point (deg) : -31.002 24.222 -31.003 25.721 The rotation angle of the fid. point is 65.438646 plMakePlateFromTile : beginning loop over 1194 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0894.par makePlates : plateInfo struct for plate 1266 : (h4).mjd 52959 (h4).raCen 124.0997 (h4).decCen 26.11284 (h4).haCen -34 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.100 26.113 124.100 27.613 plMakePlateFromTile : mjd of obs : 52959.802440 Observed HA/dec of plate center, fiducial point (deg) : -34.002 26.105 -34.003 27.605 The rotation angle of the fid. point is 69.123911 plMakePlateFromTile : beginning loop over 1295 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0895.par makePlates : plateInfo struct for plate 1267 : (h4).mjd 52959 (h4).raCen 126.6909 (h4).decCen 27.6062 (h4).haCen -36 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 126.691 27.606 126.691 29.106 plMakePlateFromTile : mjd of obs : 52959.804076 Observed HA/dec of plate center, fiducial point (deg) : -36.002 27.597 -36.003 29.097 The rotation angle of the fid. point is 71.583723 plMakePlateFromTile : beginning loop over 1188 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (0.99, -145.97, 6.2) and (0.79, -146.23, 6.4) checkLTHo : distance = 0.326, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(0.79, -146.23, 6.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0896.par makePlates : plateInfo struct for plate 1268 : (h4).mjd 52959 (h4).raCen 128.7698 (h4).decCen 29.0582 (h4).haCen -38 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.770 29.058 128.770 30.558 plMakePlateFromTile : mjd of obs : 52959.804292 Observed HA/dec of plate center, fiducial point (deg) : -38.002 29.048 -38.003 30.548 The rotation angle of the fid. point is 73.689713 plMakePlateFromTile : beginning loop over 1220 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0897.par makePlates : plateInfo struct for plate 1269 : (h4).mjd 52959 (h4).raCen 130.5585 (h4).decCen 30.13914 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 130.559 30.139 130.559 31.639 plMakePlateFromTile : mjd of obs : 52959.886837 Observed HA/dec of plate center, fiducial point (deg) : -10.002 30.127 -10.003 31.626 The rotation angle of the fid. point is 70.173856 plMakePlateFromTile : beginning loop over 1217 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0898.par makePlates : plateInfo struct for plate 1270 : (h4).mjd 52959 (h4).raCen 132.1804 (h4).decCen 31.18041 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.180 31.180 132.180 32.680 plMakePlateFromTile : mjd of obs : 52959.885788 Observed HA/dec of plate center, fiducial point (deg) : -12.002 31.167 -12.003 32.667 The rotation angle of the fid. point is 77.863699 plMakePlateFromTile : beginning loop over 1242 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0899.par makePlates : plateInfo struct for plate 1271 : (h4).mjd 52959 (h4).raCen 134.0283 (h4).decCen 32.18859 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.028 32.189 134.028 33.689 plMakePlateFromTile : mjd of obs : 52959.885365 Observed HA/dec of plate center, fiducial point (deg) : -14.002 32.174 -14.003 33.674 The rotation angle of the fid. point is 83.325256 plMakePlateFromTile : beginning loop over 1236 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0900.par makePlates : plateInfo struct for plate 1272 : (h4).mjd 52959 (h4).raCen 136.0652 (h4).decCen 33.27003 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.065 33.270 136.065 34.770 plMakePlateFromTile : mjd of obs : 52959.927031 Observed HA/dec of plate center, fiducial point (deg) : -1.002 33.255 -1.003 34.754 The rotation angle of the fid. point is 119.212348 plMakePlateFromTile : beginning loop over 1236 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0901.par makePlates : plateInfo struct for plate 1273 : (h4).mjd 52959 (h4).raCen 138.516 (h4).decCen 34.51329 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 138.516 34.513 138.516 36.013 plMakePlateFromTile : mjd of obs : 52959.928277 Observed HA/dec of plate center, fiducial point (deg) : -3.002 34.497 -3.003 35.996 The rotation angle of the fid. point is 123.664509 plMakePlateFromTile : beginning loop over 1242 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0902.par makePlates : plateInfo struct for plate 1274 : (h4).mjd 52959 (h4).raCen 141.0579 (h4).decCen 35.68295 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.058 35.683 141.058 37.183 plMakePlateFromTile : mjd of obs : 52959.965799 Observed HA/dec of plate center, fiducial point (deg) : 7.998 35.665 7.997 37.165 The rotation angle of the fid. point is -111.267546 plMakePlateFromTile : beginning loop over 1238 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0903.par makePlates : plateInfo struct for plate 1275 : (h4).mjd 52959 (h4).raCen 143.5065 (h4).decCen 36.87196 (h4).haCen 6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 143.506 36.872 143.506 38.372 plMakePlateFromTile : mjd of obs : 52959.967040 Observed HA/dec of plate center, fiducial point (deg) : 5.998 36.853 5.997 38.353 The rotation angle of the fid. point is -127.837159 plMakePlateFromTile : beginning loop over 1241 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0904.par makePlates : plateInfo struct for plate 1276 : (h4).mjd 52959 (h4).raCen 146.0273 (h4).decCen 37.91377 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 146.027 37.914 146.027 39.414 plMakePlateFromTile : mjd of obs : 52959.965708 Observed HA/dec of plate center, fiducial point (deg) : 2.998 37.894 2.997 39.394 The rotation angle of the fid. point is -153.549131 plMakePlateFromTile : beginning loop over 1245 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk64/complete//plPlugMapT-0905.par makePlates : plateInfo struct for plate 1277 : (h4).mjd 52959 (h4).raCen 148.3618 (h4).decCen 38.72231 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 1 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 148.362 38.722 148.362 40.222 plMakePlateFromTile : mjd of obs : 52959.966632 Observed HA/dec of plate center, fiducial point (deg) : 0.998 38.702 0.997 40.201 The rotation angle of the fid. point is -171.903416 plMakePlateFromTile : beginning loop over 1169 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Feb 3 15:23:22 CST 2003 Begin running fiberPlates -verbose=2 -skipBrightCheck Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_200/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_200/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 15 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1263.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 21 2 3 8 3 21 38 4 25 62 5 36 105 6 39 92 7 26 61 8 20 53 9 31 101 10 32 73 11 12 35 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 44 130 plFiberPlate : adding spectro-photo std with objId = 3605 20 3 49 64 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 58 174 plFiberPlate : adding spectro-photo std with objId = 3605 20 4 54 17 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 52 392 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 45 225 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 51 204 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 46 218 plFiberPlate : 63 possible sky positions to use as objects from a possible 343. plFiberPlate : 65 possible sky positions to use as objects from a possible 342. plFiberPlate : 51 possible sky positions to use as objects from a possible 341. plFiberPlate : 42 possible sky positions to use as objects from a possible 340. plFiberPlate : 34 possible sky positions to use as objects from a possible 339. plFiberPlate : 19 possible sky positions to use as objects from a possible 338. plFiberPlate : 20 possible sky positions to use as objects from a possible 337. plFiberPlate : 33 possible sky positions to use as objects from a possible 336. plFiberPlate : 26 possible sky positions to use as objects from a possible 335. plFiberPlate : 25 possible sky positions to use as objects from a possible 334. plFiberPlate : 24 possible sky positions to use as objects from a possible 333. plFiberPlate : 15 possible sky positions to use as objects from a possible 332. plFiberPlate : 7 possible sky positions to use as objects from a possible 331. plFiberPlate : 4 possible sky positions to use as objects from a possible 330. plFiberPlate : 3 possible sky positions to use as objects from a possible 329. plFiberPlate : 15 possible sky positions to use as objects from a possible 328. plFiberPlate : 49 possible sky positions to use as objects from a possible 327. plFiberPlate : 10 possible sky positions to use as objects from a possible 326. plFiberPlate : 10 possible sky positions to use as objects from a possible 325. plFiberPlate : 17 possible sky positions to use as objects from a possible 324. plFiberPlate : 7 possible sky positions to use as objects from a possible 323. plFiberPlate : 3 possible sky positions to use as objects from a possible 322. plFiberPlate : 6 possible sky positions to use as objects from a possible 321. plFiberPlate : 4 possible sky positions to use as objects from a possible 320. plFiberPlate : 8 possible sky positions to use as objects from a possible 319. plFiberPlate : 49 possible sky positions to use as objects from a possible 318. plFiberPlate : 30 possible sky positions to use as objects from a possible 317. plFiberPlate : 15 possible sky positions to use as objects from a possible 316. plFiberPlate : 3 possible sky positions to use as objects from a possible 315. plFiberPlate : 1 possible sky positions to use as objects from a possible 314. plFiberPlate : 4 possible sky positions to use as objects from a possible 313. plFiberPlate : 5 possible sky positions to use as objects from a possible 312. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1263.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1263.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1264.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 4 15 2 0 9 3 14 46 4 20 80 5 31 115 6 30 98 7 17 87 8 18 82 9 20 89 10 20 79 11 8 28 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 78 207 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 70 287 plFiberPlate : adding spectro-photo std with objId = 3462 20 2 51 119 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 79 194 plFiberPlate : adding spectro-photo std with objId = 3605 20 3 64 128 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 62 154 plFiberPlate : adding spectro-photo std with objId = 3605 20 4 57 263 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 79 186 plFiberPlate : 81 possible sky positions to use as objects from a possible 389. plFiberPlate : 74 possible sky positions to use as objects from a possible 388. plFiberPlate : 75 possible sky positions to use as objects from a possible 387. plFiberPlate : 61 possible sky positions to use as objects from a possible 386. plFiberPlate : 50 possible sky positions to use as objects from a possible 385. plFiberPlate : 27 possible sky positions to use as objects from a possible 384. plFiberPlate : 12 possible sky positions to use as objects from a possible 383. plFiberPlate : 46 possible sky positions to use as objects from a possible 382. plFiberPlate : 36 possible sky positions to use as objects from a possible 381. plFiberPlate : 20 possible sky positions to use as objects from a possible 380. plFiberPlate : 21 possible sky positions to use as objects from a possible 379. plFiberPlate : 11 possible sky positions to use as objects from a possible 378. plFiberPlate : 5 possible sky positions to use as objects from a possible 377. plFiberPlate : 4 possible sky positions to use as objects from a possible 376. plFiberPlate : 4 possible sky positions to use as objects from a possible 375. plFiberPlate : 8 possible sky positions to use as objects from a possible 374. plFiberPlate : 57 possible sky positions to use as objects from a possible 373. plFiberPlate : 36 possible sky positions to use as objects from a possible 372. plFiberPlate : 13 possible sky positions to use as objects from a possible 371. plFiberPlate : 14 possible sky positions to use as objects from a possible 370. plFiberPlate : 10 possible sky positions to use as objects from a possible 369. plFiberPlate : 7 possible sky positions to use as objects from a possible 368. plFiberPlate : 10 possible sky positions to use as objects from a possible 367. plFiberPlate : 11 possible sky positions to use as objects from a possible 366. plFiberPlate : 8 possible sky positions to use as objects from a possible 365. plFiberPlate : 57 possible sky positions to use as objects from a possible 364. plFiberPlate : 22 possible sky positions to use as objects from a possible 363. plFiberPlate : 6 possible sky positions to use as objects from a possible 362. plFiberPlate : 6 possible sky positions to use as objects from a possible 361. plFiberPlate : 6 possible sky positions to use as objects from a possible 360. plFiberPlate : 12 possible sky positions to use as objects from a possible 359. plFiberPlate : 10 possible sky positions to use as objects from a possible 358. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1263.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1264.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1264.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1265.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 26 2 2 10 3 15 45 4 24 94 5 35 124 6 37 95 7 25 83 8 20 87 9 30 90 10 18 96 11 6 40 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 88 38 plFiberPlate : adding spectro-photo std with objId = 3605 20 3 76 179 plFiberPlate : adding spectro-photo std with objId = 3605 20 5 89 23 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 82 36 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 98 59 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 99 34 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 98 206 plFiberPlate : adding spectro-photo std with objId = 3605 20 2 87 170 plFiberPlate : 82 possible sky positions to use as objects from a possible 427. plFiberPlate : 76 possible sky positions to use as objects from a possible 426. plFiberPlate : 59 possible sky positions to use as objects from a possible 425. plFiberPlate : 44 possible sky positions to use as objects from a possible 424. plFiberPlate : 26 possible sky positions to use as objects from a possible 423. plFiberPlate : 18 possible sky positions to use as objects from a possible 422. plFiberPlate : 27 possible sky positions to use as objects from a possible 421. plFiberPlate : 66 possible sky positions to use as objects from a possible 420. plFiberPlate : 44 possible sky positions to use as objects from a possible 419. plFiberPlate : 38 possible sky positions to use as objects from a possible 418. plFiberPlate : 25 possible sky positions to use as objects from a possible 417. plFiberPlate : 15 possible sky positions to use as objects from a possible 416. plFiberPlate : 17 possible sky positions to use as objects from a possible 415. plFiberPlate : 9 possible sky positions to use as objects from a possible 414. plFiberPlate : 8 possible sky positions to use as objects from a possible 413. plFiberPlate : 11 possible sky positions to use as objects from a possible 412. plFiberPlate : 42 possible sky positions to use as objects from a possible 411. plFiberPlate : 20 possible sky positions to use as objects from a possible 410. plFiberPlate : 10 possible sky positions to use as objects from a possible 409. plFiberPlate : 5 possible sky positions to use as objects from a possible 408. plFiberPlate : 5 possible sky positions to use as objects from a possible 407. plFiberPlate : 11 possible sky positions to use as objects from a possible 406. plFiberPlate : 14 possible sky positions to use as objects from a possible 405. plFiberPlate : 4 possible sky positions to use as objects from a possible 404. plFiberPlate : 4 possible sky positions to use as objects from a possible 403. plFiberPlate : 60 possible sky positions to use as objects from a possible 402. plFiberPlate : 13 possible sky positions to use as objects from a possible 401. plFiberPlate : 8 possible sky positions to use as objects from a possible 400. plFiberPlate : 14 possible sky positions to use as objects from a possible 399. plFiberPlate : 5 possible sky positions to use as objects from a possible 398. plFiberPlate : 10 possible sky positions to use as objects from a possible 397. plFiberPlate : 6 possible sky positions to use as objects from a possible 396. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1264.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1265.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1265.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1266.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 56 2 12 24 3 16 62 4 24 92 5 39 140 6 36 110 7 23 95 8 24 98 9 30 104 10 40 101 11 27 56 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 106 119 plFiberPlate : adding spectro-photo std with objId = 3605 20 3 109 162 plFiberPlate : adding spectro-photo std with objId = 3605 20 2 111 163 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 98 206 plFiberPlate : adding spectro-photo std with objId = 3605 20 5 107 83 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 107 24 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 100 191 plFiberPlate : adding spectro-photo std with objId = 3605 20 4 107 144 plFiberPlate : 86 possible sky positions to use as objects from a possible 488. plFiberPlate : 63 possible sky positions to use as objects from a possible 487. plFiberPlate : 54 possible sky positions to use as objects from a possible 486. plFiberPlate : 37 possible sky positions to use as objects from a possible 485. plFiberPlate : 14 possible sky positions to use as objects from a possible 484. plFiberPlate : 4 possible sky positions to use as objects from a possible 483. plFiberPlate : 35 possible sky positions to use as objects from a possible 482. plFiberPlate : 53 possible sky positions to use as objects from a possible 481. plFiberPlate : 40 possible sky positions to use as objects from a possible 480. plFiberPlate : 33 possible sky positions to use as objects from a possible 479. plFiberPlate : 18 possible sky positions to use as objects from a possible 478. plFiberPlate : 6 possible sky positions to use as objects from a possible 477. plFiberPlate : 11 possible sky positions to use as objects from a possible 476. plFiberPlate : 13 possible sky positions to use as objects from a possible 475. plFiberPlate : 12 possible sky positions to use as objects from a possible 474. plFiberPlate : 11 possible sky positions to use as objects from a possible 473. plFiberPlate : 51 possible sky positions to use as objects from a possible 472. plFiberPlate : 9 possible sky positions to use as objects from a possible 471. plFiberPlate : 6 possible sky positions to use as objects from a possible 470. plFiberPlate : 9 possible sky positions to use as objects from a possible 469. plFiberPlate : 9 possible sky positions to use as objects from a possible 468. plFiberPlate : 5 possible sky positions to use as objects from a possible 467. plFiberPlate : 14 possible sky positions to use as objects from a possible 466. plFiberPlate : 2 possible sky positions to use as objects from a possible 465. plFiberPlate : 12 possible sky positions to use as objects from a possible 464. plFiberPlate : 90 possible sky positions to use as objects from a possible 463. plFiberPlate : 21 possible sky positions to use as objects from a possible 462. plFiberPlate : 8 possible sky positions to use as objects from a possible 461. plFiberPlate : 12 possible sky positions to use as objects from a possible 460. plFiberPlate : 11 possible sky positions to use as objects from a possible 459. plFiberPlate : 12 possible sky positions to use as objects from a possible 458. plFiberPlate : 12 possible sky positions to use as objects from a possible 457. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1265.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1266.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1266.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1267.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 36 2 2 11 3 14 53 4 22 93 5 33 120 6 18 104 7 25 76 8 26 91 9 23 82 10 21 90 11 7 46 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 14 7 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 130 66 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 120 87 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 131 106 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 21 111 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 118 112 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 119 28 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 21 152 plFiberPlate : 92 possible sky positions to use as objects from a possible 430. plFiberPlate : 73 possible sky positions to use as objects from a possible 429. plFiberPlate : 66 possible sky positions to use as objects from a possible 428. plFiberPlate : 56 possible sky positions to use as objects from a possible 427. plFiberPlate : 35 possible sky positions to use as objects from a possible 426. plFiberPlate : 26 possible sky positions to use as objects from a possible 425. plFiberPlate : 35 possible sky positions to use as objects from a possible 424. plFiberPlate : 58 possible sky positions to use as objects from a possible 423. plFiberPlate : 35 possible sky positions to use as objects from a possible 422. plFiberPlate : 27 possible sky positions to use as objects from a possible 421. plFiberPlate : 10 possible sky positions to use as objects from a possible 420. plFiberPlate : 10 possible sky positions to use as objects from a possible 419. plFiberPlate : 10 possible sky positions to use as objects from a possible 418. plFiberPlate : 10 possible sky positions to use as objects from a possible 417. plFiberPlate : 11 possible sky positions to use as objects from a possible 416. plFiberPlate : 10 possible sky positions to use as objects from a possible 415. plFiberPlate : 45 possible sky positions to use as objects from a possible 414. plFiberPlate : 23 possible sky positions to use as objects from a possible 413. plFiberPlate : 20 possible sky positions to use as objects from a possible 412. plFiberPlate : 7 possible sky positions to use as objects from a possible 411. plFiberPlate : 6 possible sky positions to use as objects from a possible 410. plFiberPlate : 3 possible sky positions to use as objects from a possible 409. plFiberPlate : 9 possible sky positions to use as objects from a possible 408. plFiberPlate : 19 possible sky positions to use as objects from a possible 407. plFiberPlate : 14 possible sky positions to use as objects from a possible 406. plFiberPlate : 61 possible sky positions to use as objects from a possible 405. plFiberPlate : 23 possible sky positions to use as objects from a possible 404. plFiberPlate : 9 possible sky positions to use as objects from a possible 403. plFiberPlate : 8 possible sky positions to use as objects from a possible 402. plFiberPlate : 8 possible sky positions to use as objects from a possible 401. plFiberPlate : 9 possible sky positions to use as objects from a possible 400. plFiberPlate : 8 possible sky positions to use as objects from a possible 399. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1266.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1267.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1267.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1268.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 49 2 1 26 3 19 63 4 31 88 5 20 124 6 14 105 7 12 97 8 19 102 9 22 105 10 27 106 11 9 55 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 144 100 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 137 149 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 28 90 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 36 90 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 151 45 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 138 11 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 149 101 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 145 46 plFiberPlate : 84 possible sky positions to use as objects from a possible 481. plFiberPlate : 85 possible sky positions to use as objects from a possible 480. plFiberPlate : 32 possible sky positions to use as objects from a possible 479. plFiberPlate : 27 possible sky positions to use as objects from a possible 478. plFiberPlate : 14 possible sky positions to use as objects from a possible 477. plFiberPlate : 20 possible sky positions to use as objects from a possible 476. plFiberPlate : 19 possible sky positions to use as objects from a possible 475. plFiberPlate : 40 possible sky positions to use as objects from a possible 474. plFiberPlate : 22 possible sky positions to use as objects from a possible 473. plFiberPlate : 12 possible sky positions to use as objects from a possible 472. plFiberPlate : 8 possible sky positions to use as objects from a possible 471. plFiberPlate : 3 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 6 possible sky positions to use as objects from a possible 468. plFiberPlate : 4 possible sky positions to use as objects from a possible 467. plFiberPlate : 9 possible sky positions to use as objects from a possible 466. plFiberPlate : 49 possible sky positions to use as objects from a possible 465. plFiberPlate : 17 possible sky positions to use as objects from a possible 464. plFiberPlate : 17 possible sky positions to use as objects from a possible 463. plFiberPlate : 11 possible sky positions to use as objects from a possible 462. plFiberPlate : 6 possible sky positions to use as objects from a possible 461. plFiberPlate : 8 possible sky positions to use as objects from a possible 460. plFiberPlate : 14 possible sky positions to use as objects from a possible 459. plFiberPlate : 18 possible sky positions to use as objects from a possible 458. plFiberPlate : 11 possible sky positions to use as objects from a possible 457. plFiberPlate : 69 possible sky positions to use as objects from a possible 456. plFiberPlate : 25 possible sky positions to use as objects from a possible 455. plFiberPlate : 8 possible sky positions to use as objects from a possible 454. plFiberPlate : 12 possible sky positions to use as objects from a possible 453. plFiberPlate : 10 possible sky positions to use as objects from a possible 452. plFiberPlate : 9 possible sky positions to use as objects from a possible 451. plFiberPlate : 18 possible sky positions to use as objects from a possible 450. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1267.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1268.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1268.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1269.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 53 2 1 27 3 16 67 4 26 104 5 15 125 6 15 102 7 16 85 8 19 102 9 18 89 10 24 103 11 13 54 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 153 147 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 36 90 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 151 45 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 50 106 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 47 91 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 160 66 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 149 101 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 161 155 plFiberPlate : 120 possible sky positions to use as objects from a possible 475. plFiberPlate : 75 possible sky positions to use as objects from a possible 474. plFiberPlate : 52 possible sky positions to use as objects from a possible 473. plFiberPlate : 31 possible sky positions to use as objects from a possible 472. plFiberPlate : 11 possible sky positions to use as objects from a possible 471. plFiberPlate : 8 possible sky positions to use as objects from a possible 470. plFiberPlate : 35 possible sky positions to use as objects from a possible 469. plFiberPlate : 51 possible sky positions to use as objects from a possible 468. plFiberPlate : 37 possible sky positions to use as objects from a possible 467. plFiberPlate : 15 possible sky positions to use as objects from a possible 466. plFiberPlate : 6 possible sky positions to use as objects from a possible 465. plFiberPlate : 7 possible sky positions to use as objects from a possible 464. plFiberPlate : 3 possible sky positions to use as objects from a possible 463. plFiberPlate : 14 possible sky positions to use as objects from a possible 462. plFiberPlate : 8 possible sky positions to use as objects from a possible 461. plFiberPlate : 9 possible sky positions to use as objects from a possible 460. plFiberPlate : 54 possible sky positions to use as objects from a possible 459. plFiberPlate : 30 possible sky positions to use as objects from a possible 458. plFiberPlate : 15 possible sky positions to use as objects from a possible 457. plFiberPlate : 8 possible sky positions to use as objects from a possible 456. plFiberPlate : 7 possible sky positions to use as objects from a possible 455. plFiberPlate : 10 possible sky positions to use as objects from a possible 454. plFiberPlate : 9 possible sky positions to use as objects from a possible 453. plFiberPlate : 15 possible sky positions to use as objects from a possible 452. plFiberPlate : 12 possible sky positions to use as objects from a possible 451. plFiberPlate : 34 possible sky positions to use as objects from a possible 450. plFiberPlate : 48 possible sky positions to use as objects from a possible 449. plFiberPlate : 7 possible sky positions to use as objects from a possible 448. plFiberPlate : 15 possible sky positions to use as objects from a possible 447. plFiberPlate : 17 possible sky positions to use as objects from a possible 446. plFiberPlate : 13 possible sky positions to use as objects from a possible 445. plFiberPlate : 13 possible sky positions to use as objects from a possible 444. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1268.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1269.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1269.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1270.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 57 2 3 24 3 7 71 4 13 110 5 22 126 6 20 94 7 14 89 8 13 103 9 13 106 10 19 120 11 9 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 65 104 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 93 132 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 172 78 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 49 12 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 50 106 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 160 66 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 61 126 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 161 155 plFiberPlate : 126 possible sky positions to use as objects from a possible 509. plFiberPlate : 76 possible sky positions to use as objects from a possible 508. plFiberPlate : 56 possible sky positions to use as objects from a possible 507. plFiberPlate : 41 possible sky positions to use as objects from a possible 506. plFiberPlate : 20 possible sky positions to use as objects from a possible 505. plFiberPlate : 14 possible sky positions to use as objects from a possible 504. plFiberPlate : 24 possible sky positions to use as objects from a possible 503. plFiberPlate : 83 possible sky positions to use as objects from a possible 502. plFiberPlate : 55 possible sky positions to use as objects from a possible 501. plFiberPlate : 37 possible sky positions to use as objects from a possible 500. plFiberPlate : 18 possible sky positions to use as objects from a possible 499. plFiberPlate : 7 possible sky positions to use as objects from a possible 498. plFiberPlate : 7 possible sky positions to use as objects from a possible 497. plFiberPlate : 8 possible sky positions to use as objects from a possible 496. plFiberPlate : 18 possible sky positions to use as objects from a possible 495. plFiberPlate : 14 possible sky positions to use as objects from a possible 494. plFiberPlate : 61 possible sky positions to use as objects from a possible 493. plFiberPlate : 36 possible sky positions to use as objects from a possible 492. plFiberPlate : 27 possible sky positions to use as objects from a possible 491. plFiberPlate : 21 possible sky positions to use as objects from a possible 490. plFiberPlate : 14 possible sky positions to use as objects from a possible 489. plFiberPlate : 15 possible sky positions to use as objects from a possible 488. plFiberPlate : 15 possible sky positions to use as objects from a possible 487. plFiberPlate : 6 possible sky positions to use as objects from a possible 486. plFiberPlate : 16 possible sky positions to use as objects from a possible 485. plFiberPlate : 61 possible sky positions to use as objects from a possible 484. plFiberPlate : 10 possible sky positions to use as objects from a possible 483. plFiberPlate : 5 possible sky positions to use as objects from a possible 482. plFiberPlate : 18 possible sky positions to use as objects from a possible 481. plFiberPlate : 11 possible sky positions to use as objects from a possible 480. plFiberPlate : 16 possible sky positions to use as objects from a possible 479. plFiberPlate : 19 possible sky positions to use as objects from a possible 478. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1269.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1270.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1270.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1271.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 66 2 2 31 3 8 76 4 16 112 5 21 108 6 17 104 7 12 86 8 21 104 9 6 100 10 13 118 11 7 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 187 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 71 10 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 60 95 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 70 120 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 172 78 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 77 44 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 186 76 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 61 126 plFiberPlate : 116 possible sky positions to use as objects from a possible 496. plFiberPlate : 73 possible sky positions to use as objects from a possible 495. plFiberPlate : 42 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 12 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : 34 possible sky positions to use as objects from a possible 490. plFiberPlate : 59 possible sky positions to use as objects from a possible 489. plFiberPlate : 38 possible sky positions to use as objects from a possible 488. plFiberPlate : 14 possible sky positions to use as objects from a possible 487. plFiberPlate : 6 possible sky positions to use as objects from a possible 486. plFiberPlate : 12 possible sky positions to use as objects from a possible 485. plFiberPlate : 11 possible sky positions to use as objects from a possible 484. plFiberPlate : 14 possible sky positions to use as objects from a possible 483. plFiberPlate : 9 possible sky positions to use as objects from a possible 482. plFiberPlate : 18 possible sky positions to use as objects from a possible 481. plFiberPlate : 33 possible sky positions to use as objects from a possible 480. plFiberPlate : 18 possible sky positions to use as objects from a possible 479. plFiberPlate : 5 possible sky positions to use as objects from a possible 478. plFiberPlate : 1 possible sky positions to use as objects from a possible 477. plFiberPlate : 0 possible sky positions to use as objects from a possible 476. plFiberPlate: No sky found for bundle at 8.025 86.643, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 476. plFiberPlate : 5 possible sky positions to use as objects from a possible 475. plFiberPlate : 9 possible sky positions to use as objects from a possible 474. plFiberPlate : 15 possible sky positions to use as objects from a possible 473. plFiberPlate : 8 possible sky positions to use as objects from a possible 472. plFiberPlate : 58 possible sky positions to use as objects from a possible 471. plFiberPlate : 39 possible sky positions to use as objects from a possible 470. plFiberPlate : 22 possible sky positions to use as objects from a possible 469. plFiberPlate : 21 possible sky positions to use as objects from a possible 468. plFiberPlate : 19 possible sky positions to use as objects from a possible 467. plFiberPlate : 7 possible sky positions to use as objects from a possible 466. plFiberPlate : 11 possible sky positions to use as objects from a possible 465. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1270.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1271.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1271.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1272.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 55 2 5 39 3 15 76 4 24 102 5 20 118 6 20 95 7 13 84 8 13 98 9 15 96 10 19 123 11 9 74 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 2 77 105 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 199 61 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 197 117 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 87 41 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 77 44 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 92 83 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 186 76 plFiberPlate : adding spectro-photo std with objId = 3606 20 2 86 17 plFiberPlate : 121 possible sky positions to use as objects from a possible 490. plFiberPlate : 96 possible sky positions to use as objects from a possible 489. plFiberPlate : 71 possible sky positions to use as objects from a possible 488. plFiberPlate : 53 possible sky positions to use as objects from a possible 487. plFiberPlate : 23 possible sky positions to use as objects from a possible 486. plFiberPlate : 29 possible sky positions to use as objects from a possible 485. plFiberPlate : 25 possible sky positions to use as objects from a possible 484. plFiberPlate : 47 possible sky positions to use as objects from a possible 483. plFiberPlate : 29 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 6 possible sky positions to use as objects from a possible 480. plFiberPlate : 3 possible sky positions to use as objects from a possible 479. plFiberPlate : 6 possible sky positions to use as objects from a possible 478. plFiberPlate : 7 possible sky positions to use as objects from a possible 477. plFiberPlate : 10 possible sky positions to use as objects from a possible 476. plFiberPlate : 0 possible sky positions to use as objects from a possible 475. plFiberPlate: No sky found for bundle at 268.658 -30.481, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 475. plFiberPlate: No sky found for bundle at 268.658 -30.481, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 475. plFiberPlate : 50 possible sky positions to use as objects from a possible 474. plFiberPlate : 32 possible sky positions to use as objects from a possible 473. plFiberPlate : 30 possible sky positions to use as objects from a possible 472. plFiberPlate : 22 possible sky positions to use as objects from a possible 471. plFiberPlate : 18 possible sky positions to use as objects from a possible 470. plFiberPlate : 5 possible sky positions to use as objects from a possible 469. plFiberPlate : 13 possible sky positions to use as objects from a possible 468. plFiberPlate : 11 possible sky positions to use as objects from a possible 467. plFiberPlate : 10 possible sky positions to use as objects from a possible 466. plFiberPlate : 73 possible sky positions to use as objects from a possible 465. plFiberPlate : 24 possible sky positions to use as objects from a possible 464. plFiberPlate : 9 possible sky positions to use as objects from a possible 463. plFiberPlate : 15 possible sky positions to use as objects from a possible 462. plFiberPlate : 20 possible sky positions to use as objects from a possible 461. plFiberPlate : 15 possible sky positions to use as objects from a possible 460. plFiberPlate : 23 possible sky positions to use as objects from a possible 459. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1271.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1272.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1272.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1273.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 64 2 2 45 3 12 80 4 20 100 5 16 132 6 12 102 7 10 88 8 17 98 9 13 103 10 14 133 11 5 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 2 97 37 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 103 22 plFiberPlate : adding spectro-photo std with objId = 3606 20 1 94 71 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 91 86 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 216 28 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 214 12 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 92 83 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 109 51 plFiberPlate : 118 possible sky positions to use as objects from a possible 515. plFiberPlate : 65 possible sky positions to use as objects from a possible 514. plFiberPlate : 56 possible sky positions to use as objects from a possible 513. plFiberPlate : 38 possible sky positions to use as objects from a possible 512. plFiberPlate : 25 possible sky positions to use as objects from a possible 511. plFiberPlate : 34 possible sky positions to use as objects from a possible 510. plFiberPlate : 15 possible sky positions to use as objects from a possible 509. plFiberPlate : 62 possible sky positions to use as objects from a possible 508. plFiberPlate : 44 possible sky positions to use as objects from a possible 507. plFiberPlate : 28 possible sky positions to use as objects from a possible 506. plFiberPlate : 21 possible sky positions to use as objects from a possible 505. plFiberPlate : 14 possible sky positions to use as objects from a possible 504. plFiberPlate : 14 possible sky positions to use as objects from a possible 503. plFiberPlate : 11 possible sky positions to use as objects from a possible 502. plFiberPlate : 8 possible sky positions to use as objects from a possible 501. plFiberPlate : 10 possible sky positions to use as objects from a possible 500. plFiberPlate : 40 possible sky positions to use as objects from a possible 499. plFiberPlate : 39 possible sky positions to use as objects from a possible 498. plFiberPlate : 21 possible sky positions to use as objects from a possible 497. plFiberPlate : 20 possible sky positions to use as objects from a possible 496. plFiberPlate : 12 possible sky positions to use as objects from a possible 495. plFiberPlate : 9 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 14 possible sky positions to use as objects from a possible 492. plFiberPlate : 13 possible sky positions to use as objects from a possible 491. plFiberPlate : 53 possible sky positions to use as objects from a possible 490. plFiberPlate : 28 possible sky positions to use as objects from a possible 489. plFiberPlate : 13 possible sky positions to use as objects from a possible 488. plFiberPlate : 13 possible sky positions to use as objects from a possible 487. plFiberPlate : 14 possible sky positions to use as objects from a possible 486. plFiberPlate : 17 possible sky positions to use as objects from a possible 485. plFiberPlate : 26 possible sky positions to use as objects from a possible 484. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1272.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1273.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1273.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1274.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 64 2 6 39 3 14 70 4 20 104 5 18 117 6 15 94 7 6 98 8 10 103 9 12 106 10 24 121 11 13 69 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 123 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 109 88 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 218 44 plFiberPlate : adding spectro-photo std with objId = 3606 20 2 112 72 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 234 55 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 216 28 plFiberPlate : adding spectro-photo std with objId = 3606 20 4 109 51 plFiberPlate : adding spectro-photo std with objId = 3530 20 1 155 135 plFiberPlate : 112 possible sky positions to use as objects from a possible 511. plFiberPlate : 77 possible sky positions to use as objects from a possible 510. plFiberPlate : 47 possible sky positions to use as objects from a possible 509. plFiberPlate : 35 possible sky positions to use as objects from a possible 508. plFiberPlate : 32 possible sky positions to use as objects from a possible 507. plFiberPlate : 18 possible sky positions to use as objects from a possible 506. plFiberPlate : 19 possible sky positions to use as objects from a possible 505. plFiberPlate : 57 possible sky positions to use as objects from a possible 504. plFiberPlate : 26 possible sky positions to use as objects from a possible 503. plFiberPlate : 27 possible sky positions to use as objects from a possible 502. plFiberPlate : 13 possible sky positions to use as objects from a possible 501. plFiberPlate : 7 possible sky positions to use as objects from a possible 500. plFiberPlate : 6 possible sky positions to use as objects from a possible 499. plFiberPlate : 15 possible sky positions to use as objects from a possible 498. plFiberPlate : 6 possible sky positions to use as objects from a possible 497. plFiberPlate : 10 possible sky positions to use as objects from a possible 496. plFiberPlate : 65 possible sky positions to use as objects from a possible 495. plFiberPlate : 46 possible sky positions to use as objects from a possible 494. plFiberPlate : 38 possible sky positions to use as objects from a possible 493. plFiberPlate : 17 possible sky positions to use as objects from a possible 492. plFiberPlate : 15 possible sky positions to use as objects from a possible 491. plFiberPlate : 18 possible sky positions to use as objects from a possible 490. plFiberPlate : 13 possible sky positions to use as objects from a possible 489. plFiberPlate : 15 possible sky positions to use as objects from a possible 488. plFiberPlate : 8 possible sky positions to use as objects from a possible 487. plFiberPlate : 44 possible sky positions to use as objects from a possible 486. plFiberPlate : 22 possible sky positions to use as objects from a possible 485. plFiberPlate : 25 possible sky positions to use as objects from a possible 484. plFiberPlate : 9 possible sky positions to use as objects from a possible 483. plFiberPlate : 9 possible sky positions to use as objects from a possible 482. plFiberPlate : 14 possible sky positions to use as objects from a possible 481. plFiberPlate : 16 possible sky positions to use as objects from a possible 480. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1273.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1274.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1274.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1275.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 94 2 10 53 3 11 69 4 11 101 5 15 120 6 18 93 7 8 89 8 7 110 9 8 106 10 19 123 11 17 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 132 43 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 135 89 plFiberPlate : adding spectro-photo std with objId = 3560 20 6 236 110 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 235 13 plFiberPlate : adding spectro-photo std with objId = 3560 20 4 234 45 plFiberPlate : adding spectro-photo std with objId = 3560 20 5 236 48 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 234 55 plFiberPlate : adding spectro-photo std with objId = 3560 20 6 245 61 plFiberPlate : 109 possible sky positions to use as objects from a possible 533. plFiberPlate : 63 possible sky positions to use as objects from a possible 532. plFiberPlate : 44 possible sky positions to use as objects from a possible 531. plFiberPlate : 21 possible sky positions to use as objects from a possible 530. plFiberPlate : 18 possible sky positions to use as objects from a possible 529. plFiberPlate : 21 possible sky positions to use as objects from a possible 528. plFiberPlate : 53 possible sky positions to use as objects from a possible 527. plFiberPlate : 54 possible sky positions to use as objects from a possible 526. plFiberPlate : 44 possible sky positions to use as objects from a possible 525. plFiberPlate : 23 possible sky positions to use as objects from a possible 524. plFiberPlate : 15 possible sky positions to use as objects from a possible 523. plFiberPlate : 13 possible sky positions to use as objects from a possible 522. plFiberPlate : 12 possible sky positions to use as objects from a possible 521. plFiberPlate : 6 possible sky positions to use as objects from a possible 520. plFiberPlate : 16 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 58 possible sky positions to use as objects from a possible 517. plFiberPlate : 45 possible sky positions to use as objects from a possible 516. plFiberPlate : 32 possible sky positions to use as objects from a possible 515. plFiberPlate : 24 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : 8 possible sky positions to use as objects from a possible 512. plFiberPlate : 11 possible sky positions to use as objects from a possible 511. plFiberPlate : 21 possible sky positions to use as objects from a possible 510. plFiberPlate : 18 possible sky positions to use as objects from a possible 509. plFiberPlate : 50 possible sky positions to use as objects from a possible 508. plFiberPlate : 26 possible sky positions to use as objects from a possible 507. plFiberPlate : 25 possible sky positions to use as objects from a possible 506. plFiberPlate : 10 possible sky positions to use as objects from a possible 505. plFiberPlate : 5 possible sky positions to use as objects from a possible 504. plFiberPlate : 19 possible sky positions to use as objects from a possible 503. plFiberPlate : 5 possible sky positions to use as objects from a possible 502. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1274.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1275.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1275.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1276.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 90 2 6 50 3 6 75 4 10 110 5 9 140 6 10 100 7 6 89 8 5 111 9 6 112 10 10 144 11 8 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 256 119 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 256 63 plFiberPlate : adding spectro-photo std with objId = 3560 20 3 256 21 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 150 49 plFiberPlate : adding spectro-photo std with objId = 3560 20 2 259 4 plFiberPlate : adding spectro-photo std with objId = 3606 20 5 143 13 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 154 25 plFiberPlate : adding spectro-photo std with objId = 3560 20 6 253 156 plFiberPlate : 129 possible sky positions to use as objects from a possible 556. plFiberPlate : 66 possible sky positions to use as objects from a possible 555. plFiberPlate : 42 possible sky positions to use as objects from a possible 554. plFiberPlate : 31 possible sky positions to use as objects from a possible 553. plFiberPlate : 17 possible sky positions to use as objects from a possible 552. plFiberPlate : 40 possible sky positions to use as objects from a possible 551. plFiberPlate : 21 possible sky positions to use as objects from a possible 550. plFiberPlate : 72 possible sky positions to use as objects from a possible 549. plFiberPlate : 50 possible sky positions to use as objects from a possible 548. plFiberPlate : 45 possible sky positions to use as objects from a possible 547. plFiberPlate : 25 possible sky positions to use as objects from a possible 546. plFiberPlate : 10 possible sky positions to use as objects from a possible 545. plFiberPlate : 8 possible sky positions to use as objects from a possible 544. plFiberPlate : 15 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 10 possible sky positions to use as objects from a possible 541. plFiberPlate : 55 possible sky positions to use as objects from a possible 540. plFiberPlate : 59 possible sky positions to use as objects from a possible 539. plFiberPlate : 51 possible sky positions to use as objects from a possible 538. plFiberPlate : 39 possible sky positions to use as objects from a possible 537. plFiberPlate : 16 possible sky positions to use as objects from a possible 536. plFiberPlate : 14 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : 16 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 52 possible sky positions to use as objects from a possible 531. plFiberPlate : 14 possible sky positions to use as objects from a possible 530. plFiberPlate : 19 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 9 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 13 possible sky positions to use as objects from a possible 525. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1275.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1276.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1276.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2003.02.1/plPlugMapP-1277.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 91 2 2 52 3 6 77 4 6 106 5 7 115 6 8 91 7 7 69 8 5 72 9 9 101 10 13 149 11 6 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3562 20 6 17 55 plFiberPlate : adding spectro-photo std with objId = 3562 20 5 13 57 plFiberPlate : adding spectro-photo std with objId = 3606 20 1 164 10 plFiberPlate : adding spectro-photo std with objId = 3562 20 4 12 89 plFiberPlate : adding spectro-photo std with objId = 3606 20 1 155 53 plFiberPlate : adding spectro-photo std with objId = 3562 20 5 21 59 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 154 25 plFiberPlate : adding spectro-photo std with objId = 3606 20 3 157 24 plFiberPlate : 124 possible sky positions to use as objects from a possible 493. plFiberPlate : 53 possible sky positions to use as objects from a possible 492. plFiberPlate : 19 possible sky positions to use as objects from a possible 491. plFiberPlate : 16 possible sky positions to use as objects from a possible 490. plFiberPlate : 23 possible sky positions to use as objects from a possible 489. plFiberPlate : 27 possible sky positions to use as objects from a possible 488. plFiberPlate : 27 possible sky positions to use as objects from a possible 487. plFiberPlate : 60 possible sky positions to use as objects from a possible 486. plFiberPlate : 45 possible sky positions to use as objects from a possible 485. plFiberPlate : 29 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 16 possible sky positions to use as objects from a possible 482. plFiberPlate : 14 possible sky positions to use as objects from a possible 481. plFiberPlate : 17 possible sky positions to use as objects from a possible 480. plFiberPlate : 13 possible sky positions to use as objects from a possible 479. plFiberPlate : 11 possible sky positions to use as objects from a possible 478. plFiberPlate : 69 possible sky positions to use as objects from a possible 477. plFiberPlate : 57 possible sky positions to use as objects from a possible 476. plFiberPlate : 45 possible sky positions to use as objects from a possible 475. plFiberPlate : 35 possible sky positions to use as objects from a possible 474. plFiberPlate : 25 possible sky positions to use as objects from a possible 473. plFiberPlate : 24 possible sky positions to use as objects from a possible 472. plFiberPlate : 12 possible sky positions to use as objects from a possible 471. plFiberPlate : 12 possible sky positions to use as objects from a possible 470. plFiberPlate : 13 possible sky positions to use as objects from a possible 469. plFiberPlate : 59 possible sky positions to use as objects from a possible 468. plFiberPlate : 17 possible sky positions to use as objects from a possible 467. plFiberPlate : 8 possible sky positions to use as objects from a possible 466. plFiberPlate : 5 possible sky positions to use as objects from a possible 465. plFiberPlate : 12 possible sky positions to use as objects from a possible 464. plFiberPlate : 13 possible sky positions to use as objects from a possible 463. plFiberPlate : 13 possible sky positions to use as objects from a possible 462. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1276.ps/CPS Open /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1277.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2003.02.1/plOverlay-1277.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Feb 3 15:24:07 CST 2003 Begin running makeFanuc -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_200/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_200/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 15 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1263.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1263.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1263.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1264.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.0443,11.5214) and (-3.60,12.27) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1264.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1264.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1265.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0959,-3.9411) and (-12.33,-2.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1265.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1265.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1266.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1266.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1266.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1267.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9158,4.4464) and (12.17,3.87) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1267.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1267.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1268.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1268.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1268.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1269.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.3945,-11.0136) and (-5.75,-11.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1269.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1269.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1270.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1270.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1270.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1271.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1271.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1271.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1272.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.8491,-9.9629) and (-6.70,-10.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1272.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1272.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1273.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.6850,7.8647) and (-11.48,5.17) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1273.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1273.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1274.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (1.9650,12.1357) and (0.00,12.80) plMakeFanucCodes : fixed path between (-11.9638,3.8015) and (-12.47,2.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1274.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1274.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1275.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.8940,4.0308) and (-12.41,3.12) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1275.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1275.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1276.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1276.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1276.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1277.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-9.2568,-8.7730) and (-11.10,-5.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1277.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2003.02.1/plFanuc-1277.par plMakeFanucCodes : temperature difference 19.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00040356 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Feb 3 15:24:56 CST 2003 Begin running makeDrillPos -verbose=2 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_200/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_200/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x140e6fee8 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 15 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1263 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1264 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1265 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1266 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1267 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1268 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1269 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1270 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1271 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1272 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1273 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1274 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1275 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1276 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1277 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 1 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Feb 3 15:25:20 CST 2003 Begin running plateEnder dr2003.02.1 -morePipes 1 Executing commands in /sdss/ups/prd/dervish/v8_12/OSF1/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v14_200/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v14_200/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_1/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_10/OSF1/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_7/OSF1/etc/plateStartup.tcl: SUCCESS of status_plate SUCCESS of qc_plate SUCCESS of plateEnder --------------------------------------------------------------- Mon Feb 3 15:26:32 CST 2003 ALL DONE PS: Read file for stderr output of this job.