Sender: LSF System Subject: Job 124971: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Apr 29 11:11:56 2004 Results reported at Thu Apr 29 11:13:12 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v15_224 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.05.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 37.35 sec. Max Memory : 10 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Apr 29 11:12:00 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Apr 29 11:12:07 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux-2/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v4_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_1/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_13b/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v15_224/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Thu Apr 29 11:12:07 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v15_224/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_1/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v4_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_13b/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux-2 XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_bxY7kx --------------------------------------------------------------- --------------------------------------------------------------- Thu Apr 29 11:12:07 CDT 2004 Begin running plate --------------------------------------------------------------- Thu Apr 29 11:12:07 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bdff5c makePlates : beginning loop over plObs chain; makePlates : making 4 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapT-9497.par makePlates : plateInfo struct for plate 1855 : (h4).mjd 53173 (h4).raCen 275.53 (h4).decCen 78.51 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13.3 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 275.530 78.510 275.530 80.010 plMakePlateFromTile : mjd of obs : 53173.798178 Observed HA/dec of plate center, fiducial point (deg) : 23.999 78.495 24.006 79.994 The rotation angle of the fid. point is -152.100498 plMakePlateFromTile : beginning loop over 1703 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapT-9498.par makePlates : plateInfo struct for plate 1856 : (h4).mjd 53173 (h4).raCen 275.53 (h4).decCen 78.51 (h4).haCen 24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13.3 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 275.530 78.510 275.530 80.010 plMakePlateFromTile : mjd of obs : 53173.798178 Observed HA/dec of plate center, fiducial point (deg) : 23.999 78.495 24.006 79.994 The rotation angle of the fid. point is -152.100498 plMakePlateFromTile : beginning loop over 1682 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapT-9495.par makePlates : plateInfo struct for plate 1857 : (h4).mjd 53173 (h4).raCen 290.34 (h4).decCen 78.1957 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13.3 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 290.340 78.196 290.340 79.696 plMakePlateFromTile : mjd of obs : 53173.797594 Observed HA/dec of plate center, fiducial point (deg) : 8.999 78.184 9.009 79.683 The rotation angle of the fid. point is -169.457712 plMakePlateFromTile : beginning loop over 1610 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapT-9496.par makePlates : plateInfo struct for plate 1858 : (h4).mjd 53173 (h4).raCen 290.34 (h4).decCen 78.1957 (h4).haCen 9 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 13.3 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 290.340 78.196 290.340 79.696 plMakePlateFromTile : mjd of obs : 53173.797594 Observed HA/dec of plate center, fiducial point (deg) : 8.999 78.184 9.009 79.683 The rotation angle of the fid. point is -169.457712 plMakePlateFromTile : beginning loop over 1597 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Apr 29 11:12:24 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 4 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapP-1855.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 693 to list of science objects plFiberPlate : adding sky number 324 to list of science objects plFiberPlate : adding sky number 644 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 174 2 16 113 3 12 111 4 16 152 5 12 180 6 9 121 7 11 114 8 16 147 9 17 170 10 27 225 11 26 158 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 6 69 96 plFiberPlate : adding spectro-photo std with objId = 4134 40 6 69 88 plFiberPlate : adding spectro-photo std with objId = 4134 40 5 62 203 plFiberPlate : adding spectro-photo std with objId = 4134 40 4 61 21 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 61 49 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 61 10 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 60 21 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 59 177 plFiberPlate : 183 possible sky positions to use as objects from a possible 822. plFiberPlate : 137 possible sky positions to use as objects from a possible 821. plFiberPlate : 91 possible sky positions to use as objects from a possible 820. plFiberPlate : 43 possible sky positions to use as objects from a possible 819. plFiberPlate : 39 possible sky positions to use as objects from a possible 818. plFiberPlate : 62 possible sky positions to use as objects from a possible 817. plFiberPlate : 53 possible sky positions to use as objects from a possible 816. plFiberPlate : 104 possible sky positions to use as objects from a possible 815. plFiberPlate : 85 possible sky positions to use as objects from a possible 814. plFiberPlate : 66 possible sky positions to use as objects from a possible 813. plFiberPlate : 45 possible sky positions to use as objects from a possible 812. plFiberPlate : 15 possible sky positions to use as objects from a possible 811. plFiberPlate : 9 possible sky positions to use as objects from a possible 810. plFiberPlate : 20 possible sky positions to use as objects from a possible 809. plFiberPlate : 15 possible sky positions to use as objects from a possible 808. plFiberPlate : 26 possible sky positions to use as objects from a possible 807. plFiberPlate : 102 possible sky positions to use as objects from a possible 806. plFiberPlate : 81 possible sky positions to use as objects from a possible 805. plFiberPlate : 58 possible sky positions to use as objects from a possible 804. plFiberPlate : 32 possible sky positions to use as objects from a possible 803. plFiberPlate : 16 possible sky positions to use as objects from a possible 802. plFiberPlate : 21 possible sky positions to use as objects from a possible 801. plFiberPlate : 22 possible sky positions to use as objects from a possible 800. plFiberPlate : 24 possible sky positions to use as objects from a possible 799. plFiberPlate : 25 possible sky positions to use as objects from a possible 798. plFiberPlate : 78 possible sky positions to use as objects from a possible 797. plFiberPlate : 45 possible sky positions to use as objects from a possible 796. plFiberPlate : 26 possible sky positions to use as objects from a possible 795. plFiberPlate : 14 possible sky positions to use as objects from a possible 794. plFiberPlate : 19 possible sky positions to use as objects from a possible 793. plFiberPlate : 15 possible sky positions to use as objects from a possible 792. plFiberPlate : 26 possible sky positions to use as objects from a possible 791. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 772 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1855.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1855.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapP-1856.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 657 to list of science objects plFiberPlate : adding sky number 750 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 275 to list of science objects plFiberPlate : adding sky number 629 to list of science objects plFiberPlate : adding sky number 227 to list of science objects plFiberPlate : adding sky number 453 to list of science objects plFiberPlate : adding sky number 390 to list of science objects plFiberPlate : adding sky number 513 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 417 to list of science objects plFiberPlate : adding sky number 774 to list of science objects plFiberPlate : adding sky number 743 to list of science objects plFiberPlate : adding sky number 515 to list of science objects plFiberPlate : adding sky number 581 to list of science objects plFiberPlate : adding sky number 114 to list of science objects plFiberPlate : adding sky number 490 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 195 to list of science objects plFiberPlate : adding sky number 110 to list of science objects plFiberPlate : adding sky number 646 to list of science objects plFiberPlate : adding sky number 125 to list of science objects plFiberPlate : adding sky number 321 to list of science objects plFiberPlate : adding sky number 103 to list of science objects plFiberPlate : adding sky number 87 to list of science objects plFiberPlate : adding sky number 798 to list of science objects plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 408 to list of science objects plFiberPlate : adding sky number 667 to list of science objects plFiberPlate : adding sky number 487 to list of science objects plFiberPlate : adding sky number 235 to list of science objects plFiberPlate : adding sky number 505 to list of science objects plFiberPlate : adding sky number 415 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 166 2 16 105 3 15 107 4 20 153 5 13 171 6 9 113 7 11 109 8 16 142 9 19 158 10 29 222 11 25 146 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 6 69 96 plFiberPlate : adding spectro-photo std with objId = 4134 40 6 69 88 plFiberPlate : adding spectro-photo std with objId = 4134 40 5 62 203 plFiberPlate : adding spectro-photo std with objId = 4134 40 4 61 21 plFiberPlate : adding spectro-photo std with objId = 4134 40 1 61 63 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 60 24 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 60 21 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 59 177 plFiberPlate : 180 possible sky positions to use as objects from a possible 791. plFiberPlate : 128 possible sky positions to use as objects from a possible 790. plFiberPlate : 84 possible sky positions to use as objects from a possible 789. plFiberPlate : 62 possible sky positions to use as objects from a possible 788. plFiberPlate : 65 possible sky positions to use as objects from a possible 787. plFiberPlate : 30 possible sky positions to use as objects from a possible 786. plFiberPlate : 65 possible sky positions to use as objects from a possible 785. plFiberPlate : 116 possible sky positions to use as objects from a possible 784. plFiberPlate : 82 possible sky positions to use as objects from a possible 783. plFiberPlate : 54 possible sky positions to use as objects from a possible 782. plFiberPlate : 22 possible sky positions to use as objects from a possible 781. plFiberPlate : 24 possible sky positions to use as objects from a possible 780. plFiberPlate : 11 possible sky positions to use as objects from a possible 779. plFiberPlate : 22 possible sky positions to use as objects from a possible 778. plFiberPlate : 24 possible sky positions to use as objects from a possible 777. plFiberPlate : 24 possible sky positions to use as objects from a possible 776. plFiberPlate : 97 possible sky positions to use as objects from a possible 775. plFiberPlate : 77 possible sky positions to use as objects from a possible 774. plFiberPlate : 67 possible sky positions to use as objects from a possible 773. plFiberPlate : 38 possible sky positions to use as objects from a possible 772. plFiberPlate : 14 possible sky positions to use as objects from a possible 771. plFiberPlate : 19 possible sky positions to use as objects from a possible 770. plFiberPlate : 12 possible sky positions to use as objects from a possible 769. plFiberPlate : 29 possible sky positions to use as objects from a possible 768. plFiberPlate : 15 possible sky positions to use as objects from a possible 767. plFiberPlate : 78 possible sky positions to use as objects from a possible 766. plFiberPlate : 48 possible sky positions to use as objects from a possible 765. plFiberPlate : 37 possible sky positions to use as objects from a possible 764. plFiberPlate : 17 possible sky positions to use as objects from a possible 763. plFiberPlate : 22 possible sky positions to use as objects from a possible 762. plFiberPlate : 21 possible sky positions to use as objects from a possible 761. plFiberPlate : 19 possible sky positions to use as objects from a possible 760. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 772 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1855.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1856.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1856.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapP-1857.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 407 to list of science objects plFiberPlate : adding sky number 801 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 181 2 10 138 3 12 101 4 20 146 5 13 180 6 8 131 7 8 98 8 16 142 9 14 173 10 28 234 11 16 174 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 6 89 27 plFiberPlate : adding spectro-photo std with objId = 4134 40 4 89 176 plFiberPlate : adding spectro-photo std with objId = 4134 40 5 83 125 plFiberPlate : adding spectro-photo std with objId = 4134 40 1 83 155 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 82 123 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 82 57 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 81 242 plFiberPlate : adding spectro-photo std with objId = 4134 40 1 81 158 plFiberPlate : 156 possible sky positions to use as objects from a possible 823. plFiberPlate : 109 possible sky positions to use as objects from a possible 822. plFiberPlate : 79 possible sky positions to use as objects from a possible 821. plFiberPlate : 42 possible sky positions to use as objects from a possible 820. plFiberPlate : 45 possible sky positions to use as objects from a possible 819. plFiberPlate : 62 possible sky positions to use as objects from a possible 818. plFiberPlate : 63 possible sky positions to use as objects from a possible 817. plFiberPlate : 99 possible sky positions to use as objects from a possible 816. plFiberPlate : 94 possible sky positions to use as objects from a possible 815. plFiberPlate : 61 possible sky positions to use as objects from a possible 814. plFiberPlate : 45 possible sky positions to use as objects from a possible 813. plFiberPlate : 29 possible sky positions to use as objects from a possible 812. plFiberPlate : 15 possible sky positions to use as objects from a possible 811. plFiberPlate : 25 possible sky positions to use as objects from a possible 810. plFiberPlate : 13 possible sky positions to use as objects from a possible 809. plFiberPlate : 23 possible sky positions to use as objects from a possible 808. plFiberPlate : 99 possible sky positions to use as objects from a possible 807. plFiberPlate : 81 possible sky positions to use as objects from a possible 806. plFiberPlate : 70 possible sky positions to use as objects from a possible 805. plFiberPlate : 35 possible sky positions to use as objects from a possible 804. plFiberPlate : 18 possible sky positions to use as objects from a possible 803. plFiberPlate : 17 possible sky positions to use as objects from a possible 802. plFiberPlate : 31 possible sky positions to use as objects from a possible 801. plFiberPlate : 22 possible sky positions to use as objects from a possible 800. plFiberPlate : 12 possible sky positions to use as objects from a possible 799. plFiberPlate : 57 possible sky positions to use as objects from a possible 798. plFiberPlate : 46 possible sky positions to use as objects from a possible 797. plFiberPlate : 34 possible sky positions to use as objects from a possible 796. plFiberPlate : 16 possible sky positions to use as objects from a possible 795. plFiberPlate : 17 possible sky positions to use as objects from a possible 794. plFiberPlate : 17 possible sky positions to use as objects from a possible 793. plFiberPlate : 12 possible sky positions to use as objects from a possible 792. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 713 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1856.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1857.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1857.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.05.3/plPlugMapP-1858.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 244 to list of science objects plFiberPlate : adding sky number 644 to list of science objects plFiberPlate : adding sky number 439 to list of science objects plFiberPlate : adding sky number 642 to list of science objects plFiberPlate : adding sky number 333 to list of science objects plFiberPlate : adding sky number 741 to list of science objects plFiberPlate : adding sky number 235 to list of science objects plFiberPlate : adding sky number 292 to list of science objects plFiberPlate : adding sky number 669 to list of science objects plFiberPlate : adding sky number 760 to list of science objects plFiberPlate : adding sky number 57 to list of science objects plFiberPlate : adding sky number 784 to list of science objects plFiberPlate : adding sky number 433 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 158 to list of science objects plFiberPlate : adding sky number 545 to list of science objects plFiberPlate : adding sky number 730 to list of science objects plFiberPlate : adding sky number 286 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 16 to list of science objects plFiberPlate : adding sky number 373 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 194 to list of science objects plFiberPlate : adding sky number 790 to list of science objects plFiberPlate : adding sky number 733 to list of science objects plFiberPlate : adding sky number 690 to list of science objects plFiberPlate : adding sky number 216 to list of science objects plFiberPlate : adding sky number 437 to list of science objects plFiberPlate : adding sky number 303 to list of science objects plFiberPlate : adding sky number 614 to list of science objects plFiberPlate : adding sky number 413 to list of science objects plFiberPlate : adding sky number 538 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 180 2 8 133 3 11 102 4 21 145 5 15 168 6 9 131 7 8 101 8 18 138 9 14 167 10 25 233 11 15 168 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4134 40 6 89 27 plFiberPlate : adding spectro-photo std with objId = 4134 40 1 87 156 plFiberPlate : adding spectro-photo std with objId = 4134 40 5 83 125 plFiberPlate : adding spectro-photo std with objId = 4134 40 1 83 155 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 82 57 plFiberPlate : adding spectro-photo std with objId = 4134 40 3 81 173 plFiberPlate : adding spectro-photo std with objId = 4134 40 2 81 242 plFiberPlate : adding spectro-photo std with objId = 4134 40 1 81 158 plFiberPlate : 166 possible sky positions to use as objects from a possible 805. plFiberPlate : 109 possible sky positions to use as objects from a possible 804. plFiberPlate : 53 possible sky positions to use as objects from a possible 803. plFiberPlate : 63 possible sky positions to use as objects from a possible 802. plFiberPlate : 36 possible sky positions to use as objects from a possible 801. plFiberPlate : 57 possible sky positions to use as objects from a possible 800. plFiberPlate : 52 possible sky positions to use as objects from a possible 799. plFiberPlate : 112 possible sky positions to use as objects from a possible 798. plFiberPlate : 92 possible sky positions to use as objects from a possible 797. plFiberPlate : 71 possible sky positions to use as objects from a possible 796. plFiberPlate : 34 possible sky positions to use as objects from a possible 795. plFiberPlate : 28 possible sky positions to use as objects from a possible 794. plFiberPlate : 22 possible sky positions to use as objects from a possible 793. plFiberPlate : 33 possible sky positions to use as objects from a possible 792. plFiberPlate : 18 possible sky positions to use as objects from a possible 791. plFiberPlate : 24 possible sky positions to use as objects from a possible 790. plFiberPlate : 107 possible sky positions to use as objects from a possible 789. plFiberPlate : 75 possible sky positions to use as objects from a possible 788. plFiberPlate : 56 possible sky positions to use as objects from a possible 787. plFiberPlate : 29 possible sky positions to use as objects from a possible 786. plFiberPlate : 18 possible sky positions to use as objects from a possible 785. plFiberPlate : 21 possible sky positions to use as objects from a possible 784. plFiberPlate : 25 possible sky positions to use as objects from a possible 783. plFiberPlate : 15 possible sky positions to use as objects from a possible 782. plFiberPlate : 17 possible sky positions to use as objects from a possible 781. plFiberPlate : 61 possible sky positions to use as objects from a possible 780. plFiberPlate : 71 possible sky positions to use as objects from a possible 779. plFiberPlate : 52 possible sky positions to use as objects from a possible 778. plFiberPlate : 24 possible sky positions to use as objects from a possible 777. plFiberPlate : 28 possible sky positions to use as objects from a possible 776. plFiberPlate : 23 possible sky positions to use as objects from a possible 775. plFiberPlate : 23 possible sky positions to use as objects from a possible 774. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 713 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1857.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1858.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.05.3/plOverlay-1858.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Apr 29 11:12:38 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 4 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 110 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1855.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1855.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1855.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 110 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1856.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1856.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1856.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 51 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1857.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1857.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1857.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 51 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1858.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1858.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.05.3/plFanuc-1858.par plMakeFanucCodes : temperature difference 6.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00014231 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Apr 29 11:12:51 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8be041c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 4 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1855 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13.3 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 772 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1856 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13.3 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 772 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1857 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13.3 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 713 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1858 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 13.3 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 713 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Apr 29 11:12:59 CDT 2004 Begin running "plateEnder dr2004.05.3 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v15_224/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v15_224/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.05.3 -morePipes 1" failed. PS: Read file for stderr output of this job.