Sender: LSF System Subject: Job 13587: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Jul 14 16:45:33 2004 Results reported at Wed Jul 14 16:51:50 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v16_20 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.07.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 344.24 sec. Max Memory : 11 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Jul 14 16:45:39 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Jul 14 16:45:47 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/sdsscp/v1_35/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_2/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_7/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v16_20/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Wed Jul 14 16:45:47 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_7/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v16_20/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_2/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_35/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_ITZ07D --------------------------------------------------------------- --------------------------------------------------------------- Wed Jul 14 16:45:47 CDT 2004 Begin running plate --------------------------------------------------------------- Wed Jul 14 16:45:47 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_20/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_20/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8bf1ed4 makePlates : beginning loop over plObs chain; makePlates : making 40 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1377.par makePlates : plateInfo struct for plate 1920 : (h4).mjd 53379 (h4).raCen 117.8718 (h4).decCen 18.05336 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 117.872 18.053 117.872 19.553 plMakePlateFromTile : mjd of obs : 53379.655122 Observed HA/dec of plate center, fiducial point (deg) : -27.002 18.047 -27.003 19.546 The rotation angle of the fid. point is 53.504431 plMakePlateFromTile : beginning loop over 1382 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1409.par makePlates : plateInfo struct for plate 1921 : (h4).mjd 53379 (h4).raCen 118.2519 (h4).decCen 16.86765 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.252 16.868 118.252 18.368 plMakePlateFromTile : mjd of obs : 53379.653402 Observed HA/dec of plate center, fiducial point (deg) : -28.002 16.861 -28.003 18.361 The rotation angle of the fid. point is 52.535373 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1378.par makePlates : plateInfo struct for plate 1922 : (h4).mjd 53379 (h4).raCen 120.3001 (h4).decCen 19.78172 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 120.300 19.782 120.300 21.282 plMakePlateFromTile : mjd of obs : 53379.653537 Observed HA/dec of plate center, fiducial point (deg) : -30.002 19.774 -30.003 21.273 The rotation angle of the fid. point is 57.981953 plMakePlateFromTile : beginning loop over 1398 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1410.par makePlates : plateInfo struct for plate 1923 : (h4).mjd 53379 (h4).raCen 121.0953 (h4).decCen 18.30793 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.095 18.308 121.095 19.808 plMakePlateFromTile : mjd of obs : 53379.652967 Observed HA/dec of plate center, fiducial point (deg) : -31.002 18.300 -31.003 19.800 The rotation angle of the fid. point is 56.424871 plMakePlateFromTile : beginning loop over 1417 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1379.par makePlates : plateInfo struct for plate 1924 : (h4).mjd 53379 (h4).raCen 122.5723 (h4).decCen 21.4685 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 122.572 21.468 122.572 22.968 plMakePlateFromTile : mjd of obs : 53379.654291 Observed HA/dec of plate center, fiducial point (deg) : -32.002 21.459 -32.003 22.959 The rotation angle of the fid. point is 61.415554 plMakePlateFromTile : beginning loop over 1385 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1411.par makePlates : plateInfo struct for plate 1925 : (h4).mjd 53379 (h4).raCen 123.4017 (h4).decCen 20.20628 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.402 20.206 123.402 21.706 plMakePlateFromTile : mjd of obs : 53379.653816 Observed HA/dec of plate center, fiducial point (deg) : -33.002 20.197 -33.003 21.697 The rotation angle of the fid. point is 59.999256 plMakePlateFromTile : beginning loop over 1410 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1380.par makePlates : plateInfo struct for plate 1926 : (h4).mjd 53379 (h4).raCen 125.1618 (h4).decCen 22.91075 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.162 22.911 125.162 24.411 plMakePlateFromTile : mjd of obs : 53379.694719 Observed HA/dec of plate center, fiducial point (deg) : -20.002 22.899 -20.003 24.398 The rotation angle of the fid. point is 56.390578 plMakePlateFromTile : beginning loop over 1381 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1412.par makePlates : plateInfo struct for plate 1927 : (h4).mjd 53379 (h4).raCen 125.8834 (h4).decCen 21.38828 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.883 21.388 125.883 22.888 plMakePlateFromTile : mjd of obs : 53379.696715 Observed HA/dec of plate center, fiducial point (deg) : -20.002 21.377 -20.003 22.876 The rotation angle of the fid. point is 53.091944 plMakePlateFromTile : beginning loop over 1414 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1381.par makePlates : plateInfo struct for plate 1928 : (h4).mjd 53379 (h4).raCen 127.6074 (h4).decCen 24.34215 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.607 24.342 127.607 25.842 plMakePlateFromTile : mjd of obs : 53379.695952 Observed HA/dec of plate center, fiducial point (deg) : -22.002 24.329 -22.003 25.828 The rotation angle of the fid. point is 61.362388 plMakePlateFromTile : beginning loop over 1373 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-186.46, 42.42, 6.9) and (-186.26, 42.64, 7.7) checkLTHo : distance = 0.294, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-186.26, 42.64, 7.7) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1413.par makePlates : plateInfo struct for plate 1929 : (h4).mjd 53379 (h4).raCen 128.4895 (h4).decCen 22.72354 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.489 22.724 128.489 24.224 plMakePlateFromTile : mjd of obs : 53379.695622 Observed HA/dec of plate center, fiducial point (deg) : -23.002 22.710 -23.003 24.210 The rotation angle of the fid. point is 58.612061 plMakePlateFromTile : beginning loop over 1367 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1382.par makePlates : plateInfo struct for plate 1930 : (h4).mjd 53379 (h4).raCen 129.95 (h4).decCen 25.5966 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.950 25.597 129.950 27.097 plMakePlateFromTile : mjd of obs : 53379.696900 Observed HA/dec of plate center, fiducial point (deg) : -24.002 25.582 -24.003 27.081 The rotation angle of the fid. point is 65.410127 plMakePlateFromTile : beginning loop over 1363 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1414.par makePlates : plateInfo struct for plate 1931 : (h4).mjd 53379 (h4).raCen 131.1303 (h4).decCen 24.39664 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.130 24.397 131.130 25.897 plMakePlateFromTile : mjd of obs : 53379.694626 Observed HA/dec of plate center, fiducial point (deg) : -26.002 24.382 -26.003 25.882 The rotation angle of the fid. point is 63.848936 plMakePlateFromTile : beginning loop over 1393 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1383.par makePlates : plateInfo struct for plate 1932 : (h4).mjd 53379 (h4).raCen 132.386 (h4).decCen 27.08826 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.386 27.088 132.386 28.588 plMakePlateFromTile : mjd of obs : 53379.695336 Observed HA/dec of plate center, fiducial point (deg) : -27.002 27.072 -27.003 28.572 The rotation angle of the fid. point is 69.729897 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (121.05, -298.43, 7.7) and (118.87, -296.37, 8.5) checkLTHo : distance = 3.003, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(118.87, -296.37, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1415.par makePlates : plateInfo struct for plate 1933 : (h4).mjd 53379 (h4).raCen 133.9248 (h4).decCen 25.64546 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.925 25.645 133.925 27.145 plMakePlateFromTile : mjd of obs : 53379.696825 Observed HA/dec of plate center, fiducial point (deg) : -28.002 25.629 -28.003 27.129 The rotation angle of the fid. point is 67.086240 plMakePlateFromTile : beginning loop over 1354 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-181.00, 16.55, 7.7) and (-183.14, 18.61, 8.5) checkLTHo : distance = 2.976, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-183.14, 18.61, 8.5) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1384.par makePlates : plateInfo struct for plate 1934 : (h4).mjd 53379 (h4).raCen 134.9868 (h4).decCen 28.5053 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.987 28.505 134.987 30.005 plMakePlateFromTile : mjd of obs : 53379.696999 Observed HA/dec of plate center, fiducial point (deg) : -29.002 28.488 -29.003 29.987 The rotation angle of the fid. point is 72.959295 plMakePlateFromTile : beginning loop over 1332 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1416.par makePlates : plateInfo struct for plate 1935 : (h4).mjd 53379 (h4).raCen 136.6012 (h4).decCen 27.09274 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.601 27.093 136.601 28.593 plMakePlateFromTile : mjd of obs : 53379.737492 Observed HA/dec of plate center, fiducial point (deg) : -16.002 27.074 -16.003 28.574 The rotation angle of the fid. point is 63.785630 plMakePlateFromTile : beginning loop over 1340 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (96.06, 96.53, 8.3) and (98.76, 98.22, 8.3) checkLTHo : distance = 3.183, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(98.76, 98.22, 8.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1385.par makePlates : plateInfo struct for plate 1936 : (h4).mjd 53379 (h4).raCen 137.6848 (h4).decCen 29.63391 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.685 29.634 137.685 31.134 plMakePlateFromTile : mjd of obs : 53379.737726 Observed HA/dec of plate center, fiducial point (deg) : -17.002 29.614 -17.003 31.114 The rotation angle of the fid. point is 73.404957 plMakePlateFromTile : beginning loop over 1360 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1417.par makePlates : plateInfo struct for plate 1937 : (h4).mjd 53379 (h4).raCen 139.5471 (h4).decCen 28.12773 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.547 28.128 139.547 29.628 plMakePlateFromTile : mjd of obs : 53379.737339 Observed HA/dec of plate center, fiducial point (deg) : -19.002 28.108 -19.003 29.608 The rotation angle of the fid. point is 69.397909 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1386.par makePlates : plateInfo struct for plate 1938 : (h4).mjd 53379 (h4).raCen 140.1126 (h4).decCen 30.75928 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 140.113 30.759 140.113 32.259 plMakePlateFromTile : mjd of obs : 53379.736138 Observed HA/dec of plate center, fiducial point (deg) : -20.002 30.739 -20.003 32.238 The rotation angle of the fid. point is 77.944051 plMakePlateFromTile : beginning loop over 1337 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1418.par makePlates : plateInfo struct for plate 1939 : (h4).mjd 53379 (h4).raCen 142.0425 (h4).decCen 29.3346 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.042 29.335 142.042 30.835 plMakePlateFromTile : mjd of obs : 53379.735939 Observed HA/dec of plate center, fiducial point (deg) : -22.002 29.314 -22.003 30.813 The rotation angle of the fid. point is 74.001799 plMakePlateFromTile : beginning loop over 1340 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1402.par makePlates : plateInfo struct for plate 1940 : (h4).mjd 53379 (h4).raCen 142.2052 (h4).decCen 27.00156 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.205 27.002 142.205 28.502 plMakePlateFromTile : mjd of obs : 53379.736387 Observed HA/dec of plate center, fiducial point (deg) : -22.002 26.981 -22.003 28.481 The rotation angle of the fid. point is 67.779530 plMakePlateFromTile : beginning loop over 1192 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1387.par makePlates : plateInfo struct for plate 1941 : (h4).mjd 53379 (h4).raCen 142.2803 (h4).decCen 31.56548 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 142.280 31.565 142.280 33.065 plMakePlateFromTile : mjd of obs : 53379.736600 Observed HA/dec of plate center, fiducial point (deg) : -22.002 31.544 -22.003 33.043 The rotation angle of the fid. point is 80.363159 plMakePlateFromTile : beginning loop over 1365 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1419.par makePlates : plateInfo struct for plate 1942 : (h4).mjd 53379 (h4).raCen 144.5638 (h4).decCen 30.43559 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.564 30.436 144.564 31.936 plMakePlateFromTile : mjd of obs : 53379.737380 Observed HA/dec of plate center, fiducial point (deg) : -24.002 30.414 -24.003 31.913 The rotation angle of the fid. point is 77.157793 plMakePlateFromTile : beginning loop over 1337 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1388.par makePlates : plateInfo struct for plate 1943 : (h4).mjd 53379 (h4).raCen 144.5799 (h4).decCen 32.57797 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.580 32.578 144.580 34.078 plMakePlateFromTile : mjd of obs : 53379.737427 Observed HA/dec of plate center, fiducial point (deg) : -24.002 32.555 -24.003 34.055 The rotation angle of the fid. point is 82.847104 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1403.par makePlates : plateInfo struct for plate 1944 : (h4).mjd 53379 (h4).raCen 144.9897 (h4).decCen 28.03479 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.990 28.035 144.990 29.535 plMakePlateFromTile : mjd of obs : 53379.738557 Observed HA/dec of plate center, fiducial point (deg) : -24.002 28.014 -24.003 29.513 The rotation angle of the fid. point is 71.097739 plMakePlateFromTile : beginning loop over 1206 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1389.par makePlates : plateInfo struct for plate 1945 : (h4).mjd 53379 (h4).raCen 146.9221 (h4).decCen 33.52264 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 146.922 33.523 146.922 35.023 plMakePlateFromTile : mjd of obs : 53379.738372 Observed HA/dec of plate center, fiducial point (deg) : -26.002 33.499 -26.003 34.998 The rotation angle of the fid. point is 84.683756 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1420.par makePlates : plateInfo struct for plate 1946 : (h4).mjd 53379 (h4).raCen 147.1589 (h4).decCen 31.35382 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.159 31.354 147.159 32.854 plMakePlateFromTile : mjd of obs : 53379.736255 Observed HA/dec of plate center, fiducial point (deg) : -27.002 31.331 -27.003 32.830 The rotation angle of the fid. point is 79.200174 plMakePlateFromTile : beginning loop over 1345 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1404.par makePlates : plateInfo struct for plate 1947 : (h4).mjd 53379 (h4).raCen 147.5806 (h4).decCen 29.08056 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.581 29.081 147.581 30.581 plMakePlateFromTile : mjd of obs : 53379.737420 Observed HA/dec of plate center, fiducial point (deg) : -27.002 29.058 -27.003 30.558 The rotation angle of the fid. point is 74.022974 plMakePlateFromTile : beginning loop over 1257 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1390.par makePlates : plateInfo struct for plate 1948 : (h4).mjd 53379 (h4).raCen 149.3901 (h4).decCen 34.3365 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.390 34.337 149.390 35.837 plMakePlateFromTile : mjd of obs : 53379.736894 Observed HA/dec of plate center, fiducial point (deg) : -29.002 34.312 -29.003 35.811 The rotation angle of the fid. point is 85.431511 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1421.par makePlates : plateInfo struct for plate 1949 : (h4).mjd 53379 (h4).raCen 149.8569 (h4).decCen 32.12451 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.857 32.125 149.857 33.625 plMakePlateFromTile : mjd of obs : 53379.738185 Observed HA/dec of plate center, fiducial point (deg) : -29.002 32.101 -29.003 33.600 The rotation angle of the fid. point is 80.562371 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1405.par makePlates : plateInfo struct for plate 1950 : (h4).mjd 53379 (h4).raCen 149.9602 (h4).decCen 29.82266 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 149.960 29.823 149.960 31.323 plMakePlateFromTile : mjd of obs : 53379.738469 Observed HA/dec of plate center, fiducial point (deg) : -29.002 29.800 -29.003 31.299 The rotation angle of the fid. point is 75.653004 plMakePlateFromTile : beginning loop over 1306 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1391.par makePlates : plateInfo struct for plate 1951 : (h4).mjd 53379 (h4).raCen 151.9216 (h4).decCen 35.14801 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.922 35.148 151.922 36.648 plMakePlateFromTile : mjd of obs : 53379.738363 Observed HA/dec of plate center, fiducial point (deg) : -31.002 35.123 -31.003 36.622 The rotation angle of the fid. point is 86.286540 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1422.par makePlates : plateInfo struct for plate 1952 : (h4).mjd 53379 (h4).raCen 152.232 (h4).decCen 32.8591 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.232 32.859 152.232 34.359 plMakePlateFromTile : mjd of obs : 53379.778016 Observed HA/dec of plate center, fiducial point (deg) : -17.002 32.833 -17.003 34.333 The rotation angle of the fid. point is 85.601074 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1406.par makePlates : plateInfo struct for plate 1953 : (h4).mjd 53379 (h4).raCen 152.3607 (h4).decCen 30.54717 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.361 30.547 152.361 32.047 plMakePlateFromTile : mjd of obs : 53379.778370 Observed HA/dec of plate center, fiducial point (deg) : -17.002 30.522 -17.003 32.022 The rotation angle of the fid. point is 76.730924 plMakePlateFromTile : beginning loop over 1279 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1392.par makePlates : plateInfo struct for plate 1954 : (h4).mjd 53379 (h4).raCen 154.1467 (h4).decCen 35.78581 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.147 35.786 154.147 37.286 plMakePlateFromTile : mjd of obs : 53379.777779 Observed HA/dec of plate center, fiducial point (deg) : -19.002 35.759 -19.003 37.258 The rotation angle of the fid. point is 95.274513 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1423.par makePlates : plateInfo struct for plate 1955 : (h4).mjd 53379 (h4).raCen 154.4399 (h4).decCen 33.56777 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.440 33.568 154.440 35.068 plMakePlateFromTile : mjd of obs : 53379.820154 Observed HA/dec of plate center, fiducial point (deg) : -4.002 33.541 -4.003 35.040 The rotation angle of the fid. point is 101.717868 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1407.par makePlates : plateInfo struct for plate 1956 : (h4).mjd 53379 (h4).raCen 154.7774 (h4).decCen 31.18295 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.777 31.183 154.777 32.683 plMakePlateFromTile : mjd of obs : 53379.821087 Observed HA/dec of plate center, fiducial point (deg) : -4.002 31.157 -4.003 32.656 The rotation angle of the fid. point is 63.421564 plMakePlateFromTile : beginning loop over 1272 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1393.par makePlates : plateInfo struct for plate 1957 : (h4).mjd 53379 (h4).raCen 155.9344 (h4).decCen 36.27429 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.934 36.274 155.934 37.774 plMakePlateFromTile : mjd of obs : 53379.821525 Observed HA/dec of plate center, fiducial point (deg) : -5.002 36.246 -5.003 37.746 The rotation angle of the fid. point is 128.639711 plMakePlateFromTile : beginning loop over 1304 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1424.par makePlates : plateInfo struct for plate 1958 : (h4).mjd 53379 (h4).raCen 156.7851 (h4).decCen 33.98108 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 156.785 33.981 156.785 35.481 plMakePlateFromTile : mjd of obs : 53379.821107 Observed HA/dec of plate center, fiducial point (deg) : -6.002 33.954 -6.003 35.453 The rotation angle of the fid. point is 101.531269 plMakePlateFromTile : beginning loop over 1338 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1408.par makePlates : plateInfo struct for plate 1959 : (h4).mjd 53379 (h4).raCen 157.2429 (h4).decCen 31.73841 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.6 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.243 31.738 157.243 33.238 plMakePlateFromTile : mjd of obs : 53379.819602 Observed HA/dec of plate center, fiducial point (deg) : -7.002 31.712 -7.003 33.211 The rotation angle of the fid. point is 77.934387 plMakePlateFromTile : beginning loop over 1247 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Jul 14 16:46:48 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_20/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_20/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 40 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1920.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 101 2 32 94 3 33 88 4 29 89 5 48 106 6 47 96 7 35 74 8 27 76 9 36 99 10 41 141 11 31 90 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 39 195 plFiberPlate : adding spectro-photo std with objId = 4517 40 3 38 225 plFiberPlate : adding spectro-photo std with objId = 4517 40 4 47 281 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 45 302 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 32 35 plFiberPlate : adding spectro-photo std with objId = 4335 40 5 42 275 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 36 289 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 42 19 plFiberPlate : 95 possible sky positions to use as objects from a possible 514. plFiberPlate : 88 possible sky positions to use as objects from a possible 513. plFiberPlate : 73 possible sky positions to use as objects from a possible 512. plFiberPlate : 50 possible sky positions to use as objects from a possible 511. plFiberPlate : 23 possible sky positions to use as objects from a possible 510. plFiberPlate : 32 possible sky positions to use as objects from a possible 509. plFiberPlate : 60 possible sky positions to use as objects from a possible 508. plFiberPlate : 60 possible sky positions to use as objects from a possible 507. plFiberPlate : 52 possible sky positions to use as objects from a possible 506. plFiberPlate : 34 possible sky positions to use as objects from a possible 505. plFiberPlate : 20 possible sky positions to use as objects from a possible 504. plFiberPlate : 15 possible sky positions to use as objects from a possible 503. plFiberPlate : 5 possible sky positions to use as objects from a possible 502. plFiberPlate : 15 possible sky positions to use as objects from a possible 501. plFiberPlate : 14 possible sky positions to use as objects from a possible 500. plFiberPlate : 16 possible sky positions to use as objects from a possible 499. plFiberPlate : 33 possible sky positions to use as objects from a possible 498. plFiberPlate : 26 possible sky positions to use as objects from a possible 497. plFiberPlate : 22 possible sky positions to use as objects from a possible 496. plFiberPlate : 18 possible sky positions to use as objects from a possible 495. plFiberPlate : 10 possible sky positions to use as objects from a possible 494. plFiberPlate : 9 possible sky positions to use as objects from a possible 493. plFiberPlate : 4 possible sky positions to use as objects from a possible 492. plFiberPlate : 14 possible sky positions to use as objects from a possible 491. plFiberPlate : 8 possible sky positions to use as objects from a possible 490. plFiberPlate : 85 possible sky positions to use as objects from a possible 489. plFiberPlate : 13 possible sky positions to use as objects from a possible 488. plFiberPlate : 21 possible sky positions to use as objects from a possible 487. plFiberPlate : 10 possible sky positions to use as objects from a possible 486. plFiberPlate : 3 possible sky positions to use as objects from a possible 485. plFiberPlate : 5 possible sky positions to use as objects from a possible 484. plFiberPlate : 3 possible sky positions to use as objects from a possible 483. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1920.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1920.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1921.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 104 2 27 85 3 26 73 4 31 88 5 35 102 6 25 86 7 27 68 8 38 90 9 35 85 10 40 138 11 30 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4517 40 4 39 47 plFiberPlate : adding spectro-photo std with objId = 4517 40 3 32 379 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 37 71 plFiberPlate : adding spectro-photo std with objId = 4517 40 3 38 225 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 37 12 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 30 307 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 36 289 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 42 19 plFiberPlate : 102 possible sky positions to use as objects from a possible 511. plFiberPlate : 54 possible sky positions to use as objects from a possible 510. plFiberPlate : 58 possible sky positions to use as objects from a possible 509. plFiberPlate : 27 possible sky positions to use as objects from a possible 508. plFiberPlate : 31 possible sky positions to use as objects from a possible 507. plFiberPlate : 36 possible sky positions to use as objects from a possible 506. plFiberPlate : 50 possible sky positions to use as objects from a possible 505. plFiberPlate : 68 possible sky positions to use as objects from a possible 504. plFiberPlate : 59 possible sky positions to use as objects from a possible 503. plFiberPlate : 43 possible sky positions to use as objects from a possible 502. plFiberPlate : 26 possible sky positions to use as objects from a possible 501. plFiberPlate : 10 possible sky positions to use as objects from a possible 500. plFiberPlate : 13 possible sky positions to use as objects from a possible 499. plFiberPlate : 23 possible sky positions to use as objects from a possible 498. plFiberPlate : 13 possible sky positions to use as objects from a possible 497. plFiberPlate : 15 possible sky positions to use as objects from a possible 496. plFiberPlate : 66 possible sky positions to use as objects from a possible 495. plFiberPlate : 62 possible sky positions to use as objects from a possible 494. plFiberPlate : 49 possible sky positions to use as objects from a possible 493. plFiberPlate : 24 possible sky positions to use as objects from a possible 492. plFiberPlate : 35 possible sky positions to use as objects from a possible 491. plFiberPlate : 16 possible sky positions to use as objects from a possible 490. plFiberPlate : 9 possible sky positions to use as objects from a possible 489. plFiberPlate : 15 possible sky positions to use as objects from a possible 488. plFiberPlate : 9 possible sky positions to use as objects from a possible 487. plFiberPlate : 25 possible sky positions to use as objects from a possible 486. plFiberPlate : 37 possible sky positions to use as objects from a possible 485. plFiberPlate : 22 possible sky positions to use as objects from a possible 484. plFiberPlate : 14 possible sky positions to use as objects from a possible 483. plFiberPlate : 8 possible sky positions to use as objects from a possible 482. plFiberPlate : 11 possible sky positions to use as objects from a possible 481. plFiberPlate : 12 possible sky positions to use as objects from a possible 480. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1920.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1921.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1921.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1922.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 108 2 21 85 3 32 65 4 33 85 5 45 124 6 47 110 7 38 88 8 33 90 9 30 118 10 43 122 11 20 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 65 215 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 66 122 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 58 175 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 50 16 plFiberPlate : adding spectro-photo std with objId = 4517 40 4 64 83 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 56 200 plFiberPlate : adding spectro-photo std with objId = 4335 40 5 66 284 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 49 196 plFiberPlate : 90 possible sky positions to use as objects from a possible 536. plFiberPlate : 78 possible sky positions to use as objects from a possible 535. plFiberPlate : 47 possible sky positions to use as objects from a possible 534. plFiberPlate : 25 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 37 possible sky positions to use as objects from a possible 531. plFiberPlate : 49 possible sky positions to use as objects from a possible 530. plFiberPlate : 54 possible sky positions to use as objects from a possible 529. plFiberPlate : 46 possible sky positions to use as objects from a possible 528. plFiberPlate : 39 possible sky positions to use as objects from a possible 527. plFiberPlate : 27 possible sky positions to use as objects from a possible 526. plFiberPlate : 21 possible sky positions to use as objects from a possible 525. plFiberPlate : 6 possible sky positions to use as objects from a possible 524. plFiberPlate : 20 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 24 possible sky positions to use as objects from a possible 521. plFiberPlate : 31 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : 14 possible sky positions to use as objects from a possible 518. plFiberPlate : 9 possible sky positions to use as objects from a possible 517. plFiberPlate : 6 possible sky positions to use as objects from a possible 516. plFiberPlate : 7 possible sky positions to use as objects from a possible 515. plFiberPlate : 9 possible sky positions to use as objects from a possible 514. plFiberPlate : 7 possible sky positions to use as objects from a possible 513. plFiberPlate : 4 possible sky positions to use as objects from a possible 512. plFiberPlate : 77 possible sky positions to use as objects from a possible 511. plFiberPlate : 17 possible sky positions to use as objects from a possible 510. plFiberPlate : 14 possible sky positions to use as objects from a possible 509. plFiberPlate : 9 possible sky positions to use as objects from a possible 508. plFiberPlate : 11 possible sky positions to use as objects from a possible 507. plFiberPlate : 9 possible sky positions to use as objects from a possible 506. plFiberPlate : 9 possible sky positions to use as objects from a possible 505. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1921.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1922.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1922.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1923.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 41 104 2 35 84 3 38 84 4 31 93 5 26 90 6 14 77 7 18 65 8 33 85 9 28 90 10 59 134 11 38 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 57 226 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 58 175 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 57 95 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 60 87 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 61 68 plFiberPlate : adding spectro-photo std with objId = 4517 40 3 61 35 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 66 311 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 49 196 plFiberPlate : 102 possible sky positions to use as objects from a possible 503. plFiberPlate : 83 possible sky positions to use as objects from a possible 502. plFiberPlate : 44 possible sky positions to use as objects from a possible 501. plFiberPlate : 24 possible sky positions to use as objects from a possible 500. plFiberPlate : 35 possible sky positions to use as objects from a possible 499. plFiberPlate : 21 possible sky positions to use as objects from a possible 498. plFiberPlate : 39 possible sky positions to use as objects from a possible 497. plFiberPlate : 71 possible sky positions to use as objects from a possible 496. plFiberPlate : 66 possible sky positions to use as objects from a possible 495. plFiberPlate : 58 possible sky positions to use as objects from a possible 494. plFiberPlate : 49 possible sky positions to use as objects from a possible 493. plFiberPlate : 36 possible sky positions to use as objects from a possible 492. plFiberPlate : 26 possible sky positions to use as objects from a possible 491. plFiberPlate : 27 possible sky positions to use as objects from a possible 490. plFiberPlate : 15 possible sky positions to use as objects from a possible 489. plFiberPlate : 21 possible sky positions to use as objects from a possible 488. plFiberPlate : 68 possible sky positions to use as objects from a possible 487. plFiberPlate : 42 possible sky positions to use as objects from a possible 486. plFiberPlate : 37 possible sky positions to use as objects from a possible 485. plFiberPlate : 23 possible sky positions to use as objects from a possible 484. plFiberPlate : 18 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 5 possible sky positions to use as objects from a possible 481. plFiberPlate : 9 possible sky positions to use as objects from a possible 480. plFiberPlate : 11 possible sky positions to use as objects from a possible 479. plFiberPlate : 22 possible sky positions to use as objects from a possible 478. plFiberPlate : 13 possible sky positions to use as objects from a possible 477. plFiberPlate : 6 possible sky positions to use as objects from a possible 476. plFiberPlate : 5 possible sky positions to use as objects from a possible 475. plFiberPlate : 6 possible sky positions to use as objects from a possible 474. plFiberPlate : 13 possible sky positions to use as objects from a possible 473. plFiberPlate : 4 possible sky positions to use as objects from a possible 472. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1922.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1923.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1923.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1924.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 99 2 17 83 3 15 71 4 33 86 5 52 127 6 40 114 7 22 87 8 18 92 9 33 108 10 39 120 11 28 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4517 40 4 81 8 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 65 100 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 87 87 plFiberPlate : adding spectro-photo std with objId = 4335 40 5 71 160 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 83 246 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 84 213 plFiberPlate : adding spectro-photo std with objId = 4335 40 5 87 176 plFiberPlate : adding spectro-photo std with objId = 4517 40 5 87 14 plFiberPlate : 77 possible sky positions to use as objects from a possible 551. plFiberPlate : 66 possible sky positions to use as objects from a possible 550. plFiberPlate : 29 possible sky positions to use as objects from a possible 549. plFiberPlate : 13 possible sky positions to use as objects from a possible 548. plFiberPlate : 19 possible sky positions to use as objects from a possible 547. plFiberPlate : 37 possible sky positions to use as objects from a possible 546. plFiberPlate : 39 possible sky positions to use as objects from a possible 545. plFiberPlate : 74 possible sky positions to use as objects from a possible 544. plFiberPlate : 56 possible sky positions to use as objects from a possible 543. plFiberPlate : 43 possible sky positions to use as objects from a possible 542. plFiberPlate : 37 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 20 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : 16 possible sky positions to use as objects from a possible 537. plFiberPlate : 24 possible sky positions to use as objects from a possible 536. plFiberPlate : 58 possible sky positions to use as objects from a possible 535. plFiberPlate : 33 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : 10 possible sky positions to use as objects from a possible 532. plFiberPlate : 16 possible sky positions to use as objects from a possible 531. plFiberPlate : 9 possible sky positions to use as objects from a possible 530. plFiberPlate : 8 possible sky positions to use as objects from a possible 529. plFiberPlate : 7 possible sky positions to use as objects from a possible 528. plFiberPlate : 14 possible sky positions to use as objects from a possible 527. plFiberPlate : 126 possible sky positions to use as objects from a possible 526. plFiberPlate : 17 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 3 possible sky positions to use as objects from a possible 523. plFiberPlate : 6 possible sky positions to use as objects from a possible 522. plFiberPlate : 8 possible sky positions to use as objects from a possible 521. plFiberPlate : 10 possible sky positions to use as objects from a possible 520. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1923.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1924.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1924.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1925.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 115 2 18 104 3 21 89 4 24 81 5 31 108 6 38 95 7 27 80 8 23 94 9 33 109 10 31 153 11 26 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4508 40 4 73 102 plFiberPlate : adding spectro-photo std with objId = 4335 40 2 77 120 plFiberPlate : adding spectro-photo std with objId = 4517 40 4 73 50 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 79 78 plFiberPlate : adding spectro-photo std with objId = 4508 40 4 67 26 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 74 201 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 84 213 plFiberPlate : adding spectro-photo std with objId = 4517 40 5 87 14 plFiberPlate : 72 possible sky positions to use as objects from a possible 564. plFiberPlate : 97 possible sky positions to use as objects from a possible 563. plFiberPlate : 84 possible sky positions to use as objects from a possible 562. plFiberPlate : 70 possible sky positions to use as objects from a possible 561. plFiberPlate : 56 possible sky positions to use as objects from a possible 560. plFiberPlate : 49 possible sky positions to use as objects from a possible 559. plFiberPlate : 64 possible sky positions to use as objects from a possible 558. plFiberPlate : 53 possible sky positions to use as objects from a possible 557. plFiberPlate : 45 possible sky positions to use as objects from a possible 556. plFiberPlate : 38 possible sky positions to use as objects from a possible 555. plFiberPlate : 29 possible sky positions to use as objects from a possible 554. plFiberPlate : 19 possible sky positions to use as objects from a possible 553. plFiberPlate : 21 possible sky positions to use as objects from a possible 552. plFiberPlate : 15 possible sky positions to use as objects from a possible 551. plFiberPlate : 18 possible sky positions to use as objects from a possible 550. plFiberPlate : 18 possible sky positions to use as objects from a possible 549. plFiberPlate : 63 possible sky positions to use as objects from a possible 548. plFiberPlate : 44 possible sky positions to use as objects from a possible 547. plFiberPlate : 34 possible sky positions to use as objects from a possible 546. plFiberPlate : 24 possible sky positions to use as objects from a possible 545. plFiberPlate : 15 possible sky positions to use as objects from a possible 544. plFiberPlate : 3 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 9 possible sky positions to use as objects from a possible 541. plFiberPlate : 13 possible sky positions to use as objects from a possible 540. plFiberPlate : 49 possible sky positions to use as objects from a possible 539. plFiberPlate : 34 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 28 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 6 possible sky positions to use as objects from a possible 534. plFiberPlate : 10 possible sky positions to use as objects from a possible 533. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1924.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1925.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1925.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1926.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 130 2 25 97 3 27 79 4 28 89 5 33 128 6 30 95 7 25 81 8 30 95 9 25 77 10 39 139 11 29 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 101 82 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 87 87 plFiberPlate : adding spectro-photo std with objId = 4517 40 4 98 61 plFiberPlate : adding spectro-photo std with objId = 4335 40 5 94 222 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 100 199 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 91 178 plFiberPlate : adding spectro-photo std with objId = 4335 40 4 104 72 plFiberPlate : adding spectro-photo std with objId = 4335 40 5 104 133 plFiberPlate : 102 possible sky positions to use as objects from a possible 557. plFiberPlate : 69 possible sky positions to use as objects from a possible 556. plFiberPlate : 72 possible sky positions to use as objects from a possible 555. plFiberPlate : 33 possible sky positions to use as objects from a possible 554. plFiberPlate : 36 possible sky positions to use as objects from a possible 553. plFiberPlate : 32 possible sky positions to use as objects from a possible 552. plFiberPlate : 50 possible sky positions to use as objects from a possible 551. plFiberPlate : 31 possible sky positions to use as objects from a possible 550. plFiberPlate : 43 possible sky positions to use as objects from a possible 549. plFiberPlate : 39 possible sky positions to use as objects from a possible 548. plFiberPlate : 38 possible sky positions to use as objects from a possible 547. plFiberPlate : 28 possible sky positions to use as objects from a possible 546. plFiberPlate : 23 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 23 possible sky positions to use as objects from a possible 543. plFiberPlate : 31 possible sky positions to use as objects from a possible 542. plFiberPlate : 36 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 12 possible sky positions to use as objects from a possible 539. plFiberPlate : 5 possible sky positions to use as objects from a possible 538. plFiberPlate : 4 possible sky positions to use as objects from a possible 537. plFiberPlate : 3 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 7 possible sky positions to use as objects from a possible 533. plFiberPlate : 14 possible sky positions to use as objects from a possible 532. plFiberPlate : 4 possible sky positions to use as objects from a possible 531. plFiberPlate : 5 possible sky positions to use as objects from a possible 530. plFiberPlate : 16 possible sky positions to use as objects from a possible 529. plFiberPlate : 5 possible sky positions to use as objects from a possible 528. plFiberPlate : 8 possible sky positions to use as objects from a possible 527. plFiberPlate : 25 possible sky positions to use as objects from a possible 526. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1925.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1926.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1926.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1927.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 122 2 17 105 3 18 89 4 27 97 5 36 117 6 25 95 7 21 89 8 23 102 9 21 109 10 33 151 11 25 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 94 23 plFiberPlate : adding spectro-photo std with objId = 4517 40 4 98 61 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 99 62 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 91 178 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 87 104 plFiberPlate : adding spectro-photo std with objId = 4517 40 3 99 49 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 101 242 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 94 47 plFiberPlate : 116 possible sky positions to use as objects from a possible 592. plFiberPlate : 84 possible sky positions to use as objects from a possible 591. plFiberPlate : 53 possible sky positions to use as objects from a possible 590. plFiberPlate : 32 possible sky positions to use as objects from a possible 589. plFiberPlate : 28 possible sky positions to use as objects from a possible 588. plFiberPlate : 32 possible sky positions to use as objects from a possible 587. plFiberPlate : 80 possible sky positions to use as objects from a possible 586. plFiberPlate : 65 possible sky positions to use as objects from a possible 585. plFiberPlate : 35 possible sky positions to use as objects from a possible 584. plFiberPlate : 41 possible sky positions to use as objects from a possible 583. plFiberPlate : 36 possible sky positions to use as objects from a possible 582. plFiberPlate : 30 possible sky positions to use as objects from a possible 581. plFiberPlate : 20 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 20 possible sky positions to use as objects from a possible 578. plFiberPlate : 31 possible sky positions to use as objects from a possible 577. plFiberPlate : 60 possible sky positions to use as objects from a possible 576. plFiberPlate : 55 possible sky positions to use as objects from a possible 575. plFiberPlate : 28 possible sky positions to use as objects from a possible 574. plFiberPlate : 23 possible sky positions to use as objects from a possible 573. plFiberPlate : 3 possible sky positions to use as objects from a possible 572. plFiberPlate : 18 possible sky positions to use as objects from a possible 571. plFiberPlate : 12 possible sky positions to use as objects from a possible 570. plFiberPlate : 5 possible sky positions to use as objects from a possible 569. plFiberPlate : 19 possible sky positions to use as objects from a possible 568. plFiberPlate : 63 possible sky positions to use as objects from a possible 567. plFiberPlate : 47 possible sky positions to use as objects from a possible 566. plFiberPlate : 36 possible sky positions to use as objects from a possible 565. plFiberPlate : 34 possible sky positions to use as objects from a possible 564. plFiberPlate : 24 possible sky positions to use as objects from a possible 563. plFiberPlate : 21 possible sky positions to use as objects from a possible 562. plFiberPlate : 15 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1926.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1927.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1927.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1928.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 121 2 8 105 3 16 90 4 25 98 5 23 113 6 22 101 7 18 84 8 23 100 9 22 95 10 27 141 11 16 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 117 144 plFiberPlate : adding spectro-photo std with objId = 4517 40 5 120 24 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 101 181 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 111 86 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 118 121 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 123 145 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 112 34 plFiberPlate : adding spectro-photo std with objId = 4335 40 5 121 34 plFiberPlate : 110 possible sky positions to use as objects from a possible 589. plFiberPlate : 76 possible sky positions to use as objects from a possible 588. plFiberPlate : 69 possible sky positions to use as objects from a possible 587. plFiberPlate : 29 possible sky positions to use as objects from a possible 586. plFiberPlate : 44 possible sky positions to use as objects from a possible 585. plFiberPlate : 26 possible sky positions to use as objects from a possible 584. plFiberPlate : 38 possible sky positions to use as objects from a possible 583. plFiberPlate : 69 possible sky positions to use as objects from a possible 582. plFiberPlate : 48 possible sky positions to use as objects from a possible 581. plFiberPlate : 31 possible sky positions to use as objects from a possible 580. plFiberPlate : 24 possible sky positions to use as objects from a possible 579. plFiberPlate : 13 possible sky positions to use as objects from a possible 578. plFiberPlate : 9 possible sky positions to use as objects from a possible 577. plFiberPlate : 18 possible sky positions to use as objects from a possible 576. plFiberPlate : 17 possible sky positions to use as objects from a possible 575. plFiberPlate : 25 possible sky positions to use as objects from a possible 574. plFiberPlate : 38 possible sky positions to use as objects from a possible 573. plFiberPlate : 23 possible sky positions to use as objects from a possible 572. plFiberPlate : 13 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 11 possible sky positions to use as objects from a possible 569. plFiberPlate : 17 possible sky positions to use as objects from a possible 568. plFiberPlate : 7 possible sky positions to use as objects from a possible 567. plFiberPlate : 19 possible sky positions to use as objects from a possible 566. plFiberPlate : 3 possible sky positions to use as objects from a possible 565. plFiberPlate : 59 possible sky positions to use as objects from a possible 564. plFiberPlate : 8 possible sky positions to use as objects from a possible 563. plFiberPlate : 5 possible sky positions to use as objects from a possible 562. plFiberPlate : 5 possible sky positions to use as objects from a possible 561. plFiberPlate : 8 possible sky positions to use as objects from a possible 560. plFiberPlate : 12 possible sky positions to use as objects from a possible 559. plFiberPlate : 9 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1927.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1928.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1928.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1929.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 129 2 18 94 3 18 79 4 25 95 5 15 109 6 14 87 7 10 84 8 16 106 9 14 100 10 28 148 11 23 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4508 40 4 107 66 plFiberPlate : adding spectro-photo std with objId = 4517 40 5 120 24 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 120 38 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 111 86 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 113 79 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 101 181 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 112 65 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 104 109 plFiberPlate : 114 possible sky positions to use as objects from a possible 570. plFiberPlate : 72 possible sky positions to use as objects from a possible 569. plFiberPlate : 59 possible sky positions to use as objects from a possible 568. plFiberPlate : 47 possible sky positions to use as objects from a possible 567. plFiberPlate : 27 possible sky positions to use as objects from a possible 566. plFiberPlate : 43 possible sky positions to use as objects from a possible 565. plFiberPlate : 79 possible sky positions to use as objects from a possible 564. plFiberPlate : 91 possible sky positions to use as objects from a possible 563. plFiberPlate : 74 possible sky positions to use as objects from a possible 562. plFiberPlate : 58 possible sky positions to use as objects from a possible 561. plFiberPlate : 49 possible sky positions to use as objects from a possible 560. plFiberPlate : 32 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 13 possible sky positions to use as objects from a possible 557. plFiberPlate : 37 possible sky positions to use as objects from a possible 556. plFiberPlate : 30 possible sky positions to use as objects from a possible 555. plFiberPlate : 71 possible sky positions to use as objects from a possible 554. plFiberPlate : 35 possible sky positions to use as objects from a possible 553. plFiberPlate : 23 possible sky positions to use as objects from a possible 552. plFiberPlate : 18 possible sky positions to use as objects from a possible 551. plFiberPlate : 7 possible sky positions to use as objects from a possible 550. plFiberPlate : 9 possible sky positions to use as objects from a possible 549. plFiberPlate : 4 possible sky positions to use as objects from a possible 548. plFiberPlate : 11 possible sky positions to use as objects from a possible 547. plFiberPlate : 27 possible sky positions to use as objects from a possible 546. plFiberPlate : 50 possible sky positions to use as objects from a possible 545. plFiberPlate : 37 possible sky positions to use as objects from a possible 544. plFiberPlate : 25 possible sky positions to use as objects from a possible 543. plFiberPlate : 7 possible sky positions to use as objects from a possible 542. plFiberPlate : 23 possible sky positions to use as objects from a possible 541. plFiberPlate : 14 possible sky positions to use as objects from a possible 540. plFiberPlate : 13 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1928.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1929.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1929.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1930.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 125 2 11 111 3 11 93 4 15 98 5 14 122 6 11 119 7 12 94 8 21 106 9 14 98 10 17 146 11 13 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 58 62 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 134 97 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 29 32 plFiberPlate : adding spectro-photo std with objId = 4335 40 3 123 145 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 132 193 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 127 44 plFiberPlate : adding spectro-photo std with objId = 3644 40 2 128 159 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 51 93 plFiberPlate : 101 possible sky positions to use as objects from a possible 624. plFiberPlate : 46 possible sky positions to use as objects from a possible 623. plFiberPlate : 45 possible sky positions to use as objects from a possible 622. plFiberPlate : 35 possible sky positions to use as objects from a possible 621. plFiberPlate : 56 possible sky positions to use as objects from a possible 620. plFiberPlate : 48 possible sky positions to use as objects from a possible 619. plFiberPlate : 45 possible sky positions to use as objects from a possible 618. plFiberPlate : 68 possible sky positions to use as objects from a possible 617. plFiberPlate : 25 possible sky positions to use as objects from a possible 616. plFiberPlate : 21 possible sky positions to use as objects from a possible 615. plFiberPlate : 14 possible sky positions to use as objects from a possible 614. plFiberPlate : 11 possible sky positions to use as objects from a possible 613. plFiberPlate : 19 possible sky positions to use as objects from a possible 612. plFiberPlate : 16 possible sky positions to use as objects from a possible 611. plFiberPlate : 16 possible sky positions to use as objects from a possible 610. plFiberPlate : 16 possible sky positions to use as objects from a possible 609. plFiberPlate : 57 possible sky positions to use as objects from a possible 608. plFiberPlate : 35 possible sky positions to use as objects from a possible 607. plFiberPlate : 28 possible sky positions to use as objects from a possible 606. plFiberPlate : 13 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 29 possible sky positions to use as objects from a possible 600. plFiberPlate : 35 possible sky positions to use as objects from a possible 599. plFiberPlate : 7 possible sky positions to use as objects from a possible 598. plFiberPlate : 6 possible sky positions to use as objects from a possible 597. plFiberPlate : 3 possible sky positions to use as objects from a possible 596. plFiberPlate : 3 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 28 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1929.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1930.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1930.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1931.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 123 2 19 92 3 12 94 4 15 104 5 14 142 6 15 107 7 17 92 8 21 100 9 14 114 10 24 157 11 21 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 139 45 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 29 32 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 127 44 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 139 132 plFiberPlate : adding spectro-photo std with objId = 4508 40 4 117 94 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 137 100 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 32 119 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 134 32 plFiberPlate : 115 possible sky positions to use as objects from a possible 629. plFiberPlate : 88 possible sky positions to use as objects from a possible 628. plFiberPlate : 53 possible sky positions to use as objects from a possible 627. plFiberPlate : 31 possible sky positions to use as objects from a possible 626. plFiberPlate : 14 possible sky positions to use as objects from a possible 625. plFiberPlate : 19 possible sky positions to use as objects from a possible 624. plFiberPlate : 64 possible sky positions to use as objects from a possible 623. plFiberPlate : 81 possible sky positions to use as objects from a possible 622. plFiberPlate : 59 possible sky positions to use as objects from a possible 621. plFiberPlate : 54 possible sky positions to use as objects from a possible 620. plFiberPlate : 38 possible sky positions to use as objects from a possible 619. plFiberPlate : 29 possible sky positions to use as objects from a possible 618. plFiberPlate : 15 possible sky positions to use as objects from a possible 617. plFiberPlate : 13 possible sky positions to use as objects from a possible 616. plFiberPlate : 22 possible sky positions to use as objects from a possible 615. plFiberPlate : 51 possible sky positions to use as objects from a possible 614. plFiberPlate : 97 possible sky positions to use as objects from a possible 613. plFiberPlate : 53 possible sky positions to use as objects from a possible 612. plFiberPlate : 29 possible sky positions to use as objects from a possible 611. plFiberPlate : 17 possible sky positions to use as objects from a possible 610. plFiberPlate : 14 possible sky positions to use as objects from a possible 609. plFiberPlate : 5 possible sky positions to use as objects from a possible 608. plFiberPlate : 5 possible sky positions to use as objects from a possible 607. plFiberPlate : 6 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 70 possible sky positions to use as objects from a possible 604. plFiberPlate : 51 possible sky positions to use as objects from a possible 603. plFiberPlate : 20 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 14 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1930.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1931.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1931.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1932.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 123 2 22 91 3 13 84 4 13 106 5 23 118 6 26 112 7 18 91 8 20 95 9 23 109 10 30 154 11 27 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 152 53 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 72 26 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 144 27 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 75 71 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 83 54 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 145 131 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 140 10 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 41 98 plFiberPlate : 122 possible sky positions to use as objects from a possible 597. plFiberPlate : 85 possible sky positions to use as objects from a possible 596. plFiberPlate : 67 possible sky positions to use as objects from a possible 595. plFiberPlate : 36 possible sky positions to use as objects from a possible 594. plFiberPlate : 47 possible sky positions to use as objects from a possible 593. plFiberPlate : 49 possible sky positions to use as objects from a possible 592. plFiberPlate : 57 possible sky positions to use as objects from a possible 591. plFiberPlate : 89 possible sky positions to use as objects from a possible 590. plFiberPlate : 69 possible sky positions to use as objects from a possible 589. plFiberPlate : 44 possible sky positions to use as objects from a possible 588. plFiberPlate : 35 possible sky positions to use as objects from a possible 587. plFiberPlate : 19 possible sky positions to use as objects from a possible 586. plFiberPlate : 21 possible sky positions to use as objects from a possible 585. plFiberPlate : 23 possible sky positions to use as objects from a possible 584. plFiberPlate : 26 possible sky positions to use as objects from a possible 583. plFiberPlate : 22 possible sky positions to use as objects from a possible 582. plFiberPlate : 36 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 18 possible sky positions to use as objects from a possible 579. plFiberPlate : 12 possible sky positions to use as objects from a possible 578. plFiberPlate : 3 possible sky positions to use as objects from a possible 577. plFiberPlate : 3 possible sky positions to use as objects from a possible 576. plFiberPlate : 11 possible sky positions to use as objects from a possible 575. plFiberPlate : 7 possible sky positions to use as objects from a possible 574. plFiberPlate : 12 possible sky positions to use as objects from a possible 573. plFiberPlate : 65 possible sky positions to use as objects from a possible 572. plFiberPlate : 56 possible sky positions to use as objects from a possible 571. plFiberPlate : 19 possible sky positions to use as objects from a possible 570. plFiberPlate : 17 possible sky positions to use as objects from a possible 569. plFiberPlate : 12 possible sky positions to use as objects from a possible 568. plFiberPlate : 14 possible sky positions to use as objects from a possible 567. plFiberPlate : 11 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1931.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1932.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1932.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1933.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 128 2 12 96 3 11 92 4 12 99 5 23 121 6 19 109 7 13 84 8 15 90 9 19 102 10 23 146 11 14 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 156 14 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 153 55 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 37 20 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 140 10 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 53 78 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 138 85 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 41 98 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 37 97 plFiberPlate : 106 possible sky positions to use as objects from a possible 582. plFiberPlate : 74 possible sky positions to use as objects from a possible 581. plFiberPlate : 56 possible sky positions to use as objects from a possible 580. plFiberPlate : 42 possible sky positions to use as objects from a possible 579. plFiberPlate : 35 possible sky positions to use as objects from a possible 578. plFiberPlate : 61 possible sky positions to use as objects from a possible 577. plFiberPlate : 52 possible sky positions to use as objects from a possible 576. plFiberPlate : 73 possible sky positions to use as objects from a possible 575. plFiberPlate : 51 possible sky positions to use as objects from a possible 574. plFiberPlate : 44 possible sky positions to use as objects from a possible 573. plFiberPlate : 31 possible sky positions to use as objects from a possible 572. plFiberPlate : 21 possible sky positions to use as objects from a possible 571. plFiberPlate : 21 possible sky positions to use as objects from a possible 570. plFiberPlate : 12 possible sky positions to use as objects from a possible 569. plFiberPlate : 13 possible sky positions to use as objects from a possible 568. plFiberPlate : 24 possible sky positions to use as objects from a possible 567. plFiberPlate : 58 possible sky positions to use as objects from a possible 566. plFiberPlate : 39 possible sky positions to use as objects from a possible 565. plFiberPlate : 23 possible sky positions to use as objects from a possible 564. plFiberPlate : 9 possible sky positions to use as objects from a possible 563. plFiberPlate : 11 possible sky positions to use as objects from a possible 562. plFiberPlate : 6 possible sky positions to use as objects from a possible 561. plFiberPlate : 13 possible sky positions to use as objects from a possible 560. plFiberPlate : 12 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 70 possible sky positions to use as objects from a possible 557. plFiberPlate : 53 possible sky positions to use as objects from a possible 556. plFiberPlate : 28 possible sky positions to use as objects from a possible 555. plFiberPlate : 18 possible sky positions to use as objects from a possible 554. plFiberPlate : 12 possible sky positions to use as objects from a possible 553. plFiberPlate : 8 possible sky positions to use as objects from a possible 552. plFiberPlate : 26 possible sky positions to use as objects from a possible 551. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1932.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1933.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1933.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1934.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 103 2 12 80 3 10 88 4 14 98 5 14 130 6 21 124 7 9 103 8 13 95 9 22 109 10 21 138 11 18 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 161 45 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 91 59 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 88 92 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 161 22 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 98 76 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 86 114 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 95 16 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 169 31 plFiberPlate : 118 possible sky positions to use as objects from a possible 583. plFiberPlate : 82 possible sky positions to use as objects from a possible 582. plFiberPlate : 54 possible sky positions to use as objects from a possible 581. plFiberPlate : 29 possible sky positions to use as objects from a possible 580. plFiberPlate : 30 possible sky positions to use as objects from a possible 579. plFiberPlate : 33 possible sky positions to use as objects from a possible 578. plFiberPlate : 45 possible sky positions to use as objects from a possible 577. plFiberPlate : 76 possible sky positions to use as objects from a possible 576. plFiberPlate : 60 possible sky positions to use as objects from a possible 575. plFiberPlate : 43 possible sky positions to use as objects from a possible 574. plFiberPlate : 33 possible sky positions to use as objects from a possible 573. plFiberPlate : 10 possible sky positions to use as objects from a possible 572. plFiberPlate : 20 possible sky positions to use as objects from a possible 571. plFiberPlate : 23 possible sky positions to use as objects from a possible 570. plFiberPlate : 18 possible sky positions to use as objects from a possible 569. plFiberPlate : 18 possible sky positions to use as objects from a possible 568. plFiberPlate : 56 possible sky positions to use as objects from a possible 567. plFiberPlate : 38 possible sky positions to use as objects from a possible 566. plFiberPlate : 22 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 20 possible sky positions to use as objects from a possible 563. plFiberPlate : 16 possible sky positions to use as objects from a possible 562. plFiberPlate : 13 possible sky positions to use as objects from a possible 561. plFiberPlate : 7 possible sky positions to use as objects from a possible 560. plFiberPlate : 14 possible sky positions to use as objects from a possible 559. plFiberPlate : 109 possible sky positions to use as objects from a possible 558. plFiberPlate : 41 possible sky positions to use as objects from a possible 557. plFiberPlate : 23 possible sky positions to use as objects from a possible 556. plFiberPlate : 20 possible sky positions to use as objects from a possible 555. plFiberPlate : 18 possible sky positions to use as objects from a possible 554. plFiberPlate : 9 possible sky positions to use as objects from a possible 553. plFiberPlate : 20 possible sky positions to use as objects from a possible 552. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1933.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1934.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1934.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1935.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 122 2 17 100 3 15 78 4 15 101 5 18 114 6 14 87 7 13 84 8 11 94 9 17 101 10 19 154 11 17 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 2 69 102 plFiberPlate : adding spectro-photo std with objId = 4518 40 2 67 18 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 163 45 plFiberPlate : adding spectro-photo std with objId = 4518 40 2 60 50 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 69 22 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 95 16 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 163 56 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 68 83 plFiberPlate : 111 possible sky positions to use as objects from a possible 570. plFiberPlate : 92 possible sky positions to use as objects from a possible 569. plFiberPlate : 70 possible sky positions to use as objects from a possible 568. plFiberPlate : 34 possible sky positions to use as objects from a possible 567. plFiberPlate : 55 possible sky positions to use as objects from a possible 566. plFiberPlate : 20 possible sky positions to use as objects from a possible 565. plFiberPlate : 34 possible sky positions to use as objects from a possible 564. plFiberPlate : 73 possible sky positions to use as objects from a possible 563. plFiberPlate : 43 possible sky positions to use as objects from a possible 562. plFiberPlate : 37 possible sky positions to use as objects from a possible 561. plFiberPlate : 26 possible sky positions to use as objects from a possible 560. plFiberPlate : 9 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 11 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 20 possible sky positions to use as objects from a possible 555. plFiberPlate : 80 possible sky positions to use as objects from a possible 554. plFiberPlate : 53 possible sky positions to use as objects from a possible 553. plFiberPlate : 21 possible sky positions to use as objects from a possible 552. plFiberPlate : 16 possible sky positions to use as objects from a possible 551. plFiberPlate : 10 possible sky positions to use as objects from a possible 550. plFiberPlate : 16 possible sky positions to use as objects from a possible 549. plFiberPlate : 12 possible sky positions to use as objects from a possible 548. plFiberPlate : 8 possible sky positions to use as objects from a possible 547. plFiberPlate : 3 possible sky positions to use as objects from a possible 546. plFiberPlate : 58 possible sky positions to use as objects from a possible 545. plFiberPlate : 35 possible sky positions to use as objects from a possible 544. plFiberPlate : 17 possible sky positions to use as objects from a possible 543. plFiberPlate : 8 possible sky positions to use as objects from a possible 542. plFiberPlate : 12 possible sky positions to use as objects from a possible 541. plFiberPlate : 15 possible sky positions to use as objects from a possible 540. plFiberPlate : 9 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1934.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1935.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1935.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1936.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 129 2 9 99 3 8 80 4 16 111 5 18 140 6 20 104 7 13 70 8 13 104 9 13 96 10 22 149 11 17 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 117 8 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 116 107 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 178 23 plFiberPlate : adding spectro-photo std with objId = 4508 40 6 178 10 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 109 85 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 116 24 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 179 57 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 181 10 plFiberPlate : 104 possible sky positions to use as objects from a possible 605. plFiberPlate : 65 possible sky positions to use as objects from a possible 604. plFiberPlate : 37 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 36 possible sky positions to use as objects from a possible 600. plFiberPlate : 70 possible sky positions to use as objects from a possible 599. plFiberPlate : 70 possible sky positions to use as objects from a possible 598. plFiberPlate : 49 possible sky positions to use as objects from a possible 597. plFiberPlate : 35 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 11 possible sky positions to use as objects from a possible 592. plFiberPlate : 31 possible sky positions to use as objects from a possible 591. plFiberPlate : 28 possible sky positions to use as objects from a possible 590. plFiberPlate : 66 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 21 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 7 possible sky positions to use as objects from a possible 584. plFiberPlate : 5 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 11 possible sky positions to use as objects from a possible 581. plFiberPlate : 59 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : 12 possible sky positions to use as objects from a possible 577. plFiberPlate : 6 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : 22 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1935.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1936.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1936.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1937.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 128 2 13 106 3 9 92 4 19 107 5 9 123 6 12 105 7 12 97 8 11 108 9 9 105 10 24 140 11 16 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 74 74 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 181 102 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 88 14 plFiberPlate : adding spectro-photo std with objId = 4508 40 6 178 10 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 179 57 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 174 141 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 201 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 87 12 plFiberPlate : 124 possible sky positions to use as objects from a possible 611. plFiberPlate : 73 possible sky positions to use as objects from a possible 610. plFiberPlate : 40 possible sky positions to use as objects from a possible 609. plFiberPlate : 29 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 52 possible sky positions to use as objects from a possible 606. plFiberPlate : 44 possible sky positions to use as objects from a possible 605. plFiberPlate : 70 possible sky positions to use as objects from a possible 604. plFiberPlate : 50 possible sky positions to use as objects from a possible 603. plFiberPlate : 34 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 6 possible sky positions to use as objects from a possible 600. plFiberPlate : 5 possible sky positions to use as objects from a possible 599. plFiberPlate : 7 possible sky positions to use as objects from a possible 598. plFiberPlate : 26 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 56 possible sky positions to use as objects from a possible 595. plFiberPlate : 57 possible sky positions to use as objects from a possible 594. plFiberPlate : 31 possible sky positions to use as objects from a possible 593. plFiberPlate : 17 possible sky positions to use as objects from a possible 592. plFiberPlate : 6 possible sky positions to use as objects from a possible 591. plFiberPlate : 18 possible sky positions to use as objects from a possible 590. plFiberPlate : 19 possible sky positions to use as objects from a possible 589. plFiberPlate : 4 possible sky positions to use as objects from a possible 588. plFiberPlate : 25 possible sky positions to use as objects from a possible 587. plFiberPlate : 42 possible sky positions to use as objects from a possible 586. plFiberPlate : 41 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 13 possible sky positions to use as objects from a possible 582. plFiberPlate : 12 possible sky positions to use as objects from a possible 581. plFiberPlate : 21 possible sky positions to use as objects from a possible 580. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1936.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1937.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1937.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1938.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 121 2 12 96 3 17 85 4 13 106 5 19 126 6 13 117 7 13 95 8 8 107 9 16 109 10 16 149 11 8 108 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 130 31 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 201 86 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 120 24 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 116 107 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 116 24 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 94 19 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 125 8 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 196 73 plFiberPlate : 113 possible sky positions to use as objects from a possible 607. plFiberPlate : 72 possible sky positions to use as objects from a possible 606. plFiberPlate : 49 possible sky positions to use as objects from a possible 605. plFiberPlate : 29 possible sky positions to use as objects from a possible 604. plFiberPlate : 27 possible sky positions to use as objects from a possible 603. plFiberPlate : 36 possible sky positions to use as objects from a possible 602. plFiberPlate : 46 possible sky positions to use as objects from a possible 601. plFiberPlate : 70 possible sky positions to use as objects from a possible 600. plFiberPlate : 40 possible sky positions to use as objects from a possible 599. plFiberPlate : 20 possible sky positions to use as objects from a possible 598. plFiberPlate : 15 possible sky positions to use as objects from a possible 597. plFiberPlate : 12 possible sky positions to use as objects from a possible 596. plFiberPlate : 4 possible sky positions to use as objects from a possible 595. plFiberPlate : 4 possible sky positions to use as objects from a possible 594. plFiberPlate : 29 possible sky positions to use as objects from a possible 593. plFiberPlate : 29 possible sky positions to use as objects from a possible 592. plFiberPlate : 67 possible sky positions to use as objects from a possible 591. plFiberPlate : 48 possible sky positions to use as objects from a possible 590. plFiberPlate : 35 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 16 possible sky positions to use as objects from a possible 587. plFiberPlate : 10 possible sky positions to use as objects from a possible 586. plFiberPlate : 7 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 24 possible sky positions to use as objects from a possible 583. plFiberPlate : 26 possible sky positions to use as objects from a possible 582. plFiberPlate : 46 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 28 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 18 possible sky positions to use as objects from a possible 576. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1937.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1938.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1938.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1939.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 118 2 13 101 3 10 90 4 15 99 5 10 116 6 15 90 7 9 90 8 11 106 9 10 109 10 23 153 11 15 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 205 21 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 92 88 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 95 25 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 94 19 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 199 87 plFiberPlate : adding spectro-photo std with objId = 4518 40 2 93 62 plFiberPlate : adding spectro-photo std with objId = 4508 40 5 196 164 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 105 143 plFiberPlate : 109 possible sky positions to use as objects from a possible 596. plFiberPlate : 101 possible sky positions to use as objects from a possible 595. plFiberPlate : 91 possible sky positions to use as objects from a possible 594. plFiberPlate : 65 possible sky positions to use as objects from a possible 593. plFiberPlate : 33 possible sky positions to use as objects from a possible 592. plFiberPlate : 34 possible sky positions to use as objects from a possible 591. plFiberPlate : 48 possible sky positions to use as objects from a possible 590. plFiberPlate : 57 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 38 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 15 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 5 possible sky positions to use as objects from a possible 581. plFiberPlate : 61 possible sky positions to use as objects from a possible 580. plFiberPlate : 51 possible sky positions to use as objects from a possible 579. plFiberPlate : 34 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 5 possible sky positions to use as objects from a possible 576. plFiberPlate : 15 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 7 possible sky positions to use as objects from a possible 573. plFiberPlate : 33 possible sky positions to use as objects from a possible 572. plFiberPlate : 54 possible sky positions to use as objects from a possible 571. plFiberPlate : 32 possible sky positions to use as objects from a possible 570. plFiberPlate : 26 possible sky positions to use as objects from a possible 569. plFiberPlate : 13 possible sky positions to use as objects from a possible 568. plFiberPlate : 18 possible sky positions to use as objects from a possible 567. plFiberPlate : 11 possible sky positions to use as objects from a possible 566. plFiberPlate : 27 possible sky positions to use as objects from a possible 565. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1938.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1939.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1939.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1940.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 73 2 2 18 3 5 51 4 9 88 5 10 129 6 10 92 7 12 80 8 15 102 9 14 97 10 11 100 11 8 62 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 207 54 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 199 28 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 191 2 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 204 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 204 67 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 204 39 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 214 18 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 201 4 plFiberPlate : 97 possible sky positions to use as objects from a possible 471. plFiberPlate : 78 possible sky positions to use as objects from a possible 470. plFiberPlate : 54 possible sky positions to use as objects from a possible 469. plFiberPlate : 35 possible sky positions to use as objects from a possible 468. plFiberPlate : 21 possible sky positions to use as objects from a possible 467. plFiberPlate : 15 possible sky positions to use as objects from a possible 466. plFiberPlate : 38 possible sky positions to use as objects from a possible 465. plFiberPlate : 43 possible sky positions to use as objects from a possible 464. plFiberPlate : 45 possible sky positions to use as objects from a possible 463. plFiberPlate : 39 possible sky positions to use as objects from a possible 462. plFiberPlate : 26 possible sky positions to use as objects from a possible 461. plFiberPlate : 12 possible sky positions to use as objects from a possible 460. plFiberPlate : 2 possible sky positions to use as objects from a possible 459. plFiberPlate : 20 possible sky positions to use as objects from a possible 458. plFiberPlate : 18 possible sky positions to use as objects from a possible 457. plFiberPlate : 24 possible sky positions to use as objects from a possible 456. plFiberPlate : 66 possible sky positions to use as objects from a possible 455. plFiberPlate : 50 possible sky positions to use as objects from a possible 454. plFiberPlate : 26 possible sky positions to use as objects from a possible 453. plFiberPlate : 12 possible sky positions to use as objects from a possible 452. plFiberPlate : 12 possible sky positions to use as objects from a possible 451. plFiberPlate : 14 possible sky positions to use as objects from a possible 450. plFiberPlate : 8 possible sky positions to use as objects from a possible 449. plFiberPlate : 8 possible sky positions to use as objects from a possible 448. plFiberPlate : 4 possible sky positions to use as objects from a possible 447. plFiberPlate : 56 possible sky positions to use as objects from a possible 446. plFiberPlate : 50 possible sky positions to use as objects from a possible 445. plFiberPlate : 35 possible sky positions to use as objects from a possible 444. plFiberPlate : 16 possible sky positions to use as objects from a possible 443. plFiberPlate : 13 possible sky positions to use as objects from a possible 442. plFiberPlate : 10 possible sky positions to use as objects from a possible 441. plFiberPlate : 24 possible sky positions to use as objects from a possible 440. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1939.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1940.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1940.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1941.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 138 2 11 115 3 13 81 4 12 103 5 18 118 6 15 111 7 15 98 8 21 106 9 16 112 10 24 161 11 13 125 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 220 51 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 136 52 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 146 82 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 145 39 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 207 34 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 214 16 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 220 50 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 105 143 plFiberPlate : 105 possible sky positions to use as objects from a possible 630. plFiberPlate : 98 possible sky positions to use as objects from a possible 629. plFiberPlate : 47 possible sky positions to use as objects from a possible 628. plFiberPlate : 38 possible sky positions to use as objects from a possible 627. plFiberPlate : 37 possible sky positions to use as objects from a possible 626. plFiberPlate : 24 possible sky positions to use as objects from a possible 625. plFiberPlate : 84 possible sky positions to use as objects from a possible 624. plFiberPlate : 92 possible sky positions to use as objects from a possible 623. plFiberPlate : 59 possible sky positions to use as objects from a possible 622. plFiberPlate : 38 possible sky positions to use as objects from a possible 621. plFiberPlate : 15 possible sky positions to use as objects from a possible 620. plFiberPlate : 14 possible sky positions to use as objects from a possible 619. plFiberPlate : 11 possible sky positions to use as objects from a possible 618. plFiberPlate : 26 possible sky positions to use as objects from a possible 617. plFiberPlate : 23 possible sky positions to use as objects from a possible 616. plFiberPlate : 18 possible sky positions to use as objects from a possible 615. plFiberPlate : 50 possible sky positions to use as objects from a possible 614. plFiberPlate : 44 possible sky positions to use as objects from a possible 613. plFiberPlate : 34 possible sky positions to use as objects from a possible 612. plFiberPlate : 8 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 5 possible sky positions to use as objects from a possible 609. plFiberPlate : 12 possible sky positions to use as objects from a possible 608. plFiberPlate : 10 possible sky positions to use as objects from a possible 607. plFiberPlate : 19 possible sky positions to use as objects from a possible 606. plFiberPlate : 59 possible sky positions to use as objects from a possible 605. plFiberPlate : 47 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 29 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1940.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1941.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1941.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1942.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 112 2 13 85 3 11 83 4 9 115 5 15 136 6 15 102 7 9 97 8 9 115 9 13 112 10 15 140 11 18 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 2 107 123 plFiberPlate : adding spectro-photo std with objId = 4518 40 1 112 16 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 112 54 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 214 16 plFiberPlate : adding spectro-photo std with objId = 4508 40 6 218 36 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 220 50 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 221 77 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 214 31 plFiberPlate : 110 possible sky positions to use as objects from a possible 612. plFiberPlate : 51 possible sky positions to use as objects from a possible 611. plFiberPlate : 26 possible sky positions to use as objects from a possible 610. plFiberPlate : 24 possible sky positions to use as objects from a possible 609. plFiberPlate : 34 possible sky positions to use as objects from a possible 608. plFiberPlate : 43 possible sky positions to use as objects from a possible 607. plFiberPlate : 30 possible sky positions to use as objects from a possible 606. plFiberPlate : 82 possible sky positions to use as objects from a possible 605. plFiberPlate : 39 possible sky positions to use as objects from a possible 604. plFiberPlate : 20 possible sky positions to use as objects from a possible 603. plFiberPlate : 12 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 14 possible sky positions to use as objects from a possible 600. plFiberPlate : 9 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 17 possible sky positions to use as objects from a possible 597. plFiberPlate : 74 possible sky positions to use as objects from a possible 596. plFiberPlate : 48 possible sky positions to use as objects from a possible 595. plFiberPlate : 27 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 25 possible sky positions to use as objects from a possible 588. plFiberPlate : 71 possible sky positions to use as objects from a possible 587. plFiberPlate : 50 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 12 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 21 possible sky positions to use as objects from a possible 582. plFiberPlate : 18 possible sky positions to use as objects from a possible 581. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1941.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1942.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1942.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1943.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 114 2 8 95 3 15 85 4 19 103 5 19 124 6 13 111 7 15 106 8 18 111 9 16 101 10 16 154 11 10 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 156 41 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 231 20 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 145 39 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 149 70 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 222 31 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 158 110 plFiberPlate : adding spectro-photo std with objId = 4508 40 6 218 36 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 152 96 plFiberPlate : 116 possible sky positions to use as objects from a possible 605. plFiberPlate : 100 possible sky positions to use as objects from a possible 604. plFiberPlate : 60 possible sky positions to use as objects from a possible 603. plFiberPlate : 30 possible sky positions to use as objects from a possible 602. plFiberPlate : 29 possible sky positions to use as objects from a possible 601. plFiberPlate : 44 possible sky positions to use as objects from a possible 600. plFiberPlate : 55 possible sky positions to use as objects from a possible 599. plFiberPlate : 79 possible sky positions to use as objects from a possible 598. plFiberPlate : 69 possible sky positions to use as objects from a possible 597. plFiberPlate : 60 possible sky positions to use as objects from a possible 596. plFiberPlate : 49 possible sky positions to use as objects from a possible 595. plFiberPlate : 26 possible sky positions to use as objects from a possible 594. plFiberPlate : 18 possible sky positions to use as objects from a possible 593. plFiberPlate : 6 possible sky positions to use as objects from a possible 592. plFiberPlate : 15 possible sky positions to use as objects from a possible 591. plFiberPlate : 21 possible sky positions to use as objects from a possible 590. plFiberPlate : 82 possible sky positions to use as objects from a possible 589. plFiberPlate : 47 possible sky positions to use as objects from a possible 588. plFiberPlate : 30 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 14 possible sky positions to use as objects from a possible 583. plFiberPlate : 11 possible sky positions to use as objects from a possible 582. plFiberPlate : 27 possible sky positions to use as objects from a possible 581. plFiberPlate : 30 possible sky positions to use as objects from a possible 580. plFiberPlate : 22 possible sky positions to use as objects from a possible 579. plFiberPlate : 30 possible sky positions to use as objects from a possible 578. plFiberPlate : 9 possible sky positions to use as objects from a possible 577. plFiberPlate : 14 possible sky positions to use as objects from a possible 576. plFiberPlate : 16 possible sky positions to use as objects from a possible 575. plFiberPlate : 31 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1942.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1943.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1943.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1944.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 59 2 2 25 3 7 53 4 13 106 5 22 114 6 10 97 7 8 100 8 10 98 9 14 108 10 15 114 11 8 65 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 210 81 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 212 97 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 223 95 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 221 84 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 227 37 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 222 98 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 227 38 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 210 85 plFiberPlate : 116 possible sky positions to use as objects from a possible 497. plFiberPlate : 87 possible sky positions to use as objects from a possible 496. plFiberPlate : 74 possible sky positions to use as objects from a possible 495. plFiberPlate : 57 possible sky positions to use as objects from a possible 494. plFiberPlate : 26 possible sky positions to use as objects from a possible 493. plFiberPlate : 36 possible sky positions to use as objects from a possible 492. plFiberPlate : 34 possible sky positions to use as objects from a possible 491. plFiberPlate : 78 possible sky positions to use as objects from a possible 490. plFiberPlate : 61 possible sky positions to use as objects from a possible 489. plFiberPlate : 46 possible sky positions to use as objects from a possible 488. plFiberPlate : 25 possible sky positions to use as objects from a possible 487. plFiberPlate : 11 possible sky positions to use as objects from a possible 486. plFiberPlate : 10 possible sky positions to use as objects from a possible 485. plFiberPlate : 14 possible sky positions to use as objects from a possible 484. plFiberPlate : 12 possible sky positions to use as objects from a possible 483. plFiberPlate : 10 possible sky positions to use as objects from a possible 482. plFiberPlate : 66 possible sky positions to use as objects from a possible 481. plFiberPlate : 43 possible sky positions to use as objects from a possible 480. plFiberPlate : 23 possible sky positions to use as objects from a possible 479. plFiberPlate : 16 possible sky positions to use as objects from a possible 478. plFiberPlate : 10 possible sky positions to use as objects from a possible 477. plFiberPlate : 7 possible sky positions to use as objects from a possible 476. plFiberPlate : 5 possible sky positions to use as objects from a possible 475. plFiberPlate : 11 possible sky positions to use as objects from a possible 474. plFiberPlate : 17 possible sky positions to use as objects from a possible 473. plFiberPlate : 33 possible sky positions to use as objects from a possible 472. plFiberPlate : 34 possible sky positions to use as objects from a possible 471. plFiberPlate : 27 possible sky positions to use as objects from a possible 470. plFiberPlate : 19 possible sky positions to use as objects from a possible 469. plFiberPlate : 26 possible sky positions to use as objects from a possible 468. plFiberPlate : 10 possible sky positions to use as objects from a possible 467. plFiberPlate : 19 possible sky positions to use as objects from a possible 466. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1943.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1944.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1944.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1945.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 118 2 11 93 3 14 97 4 19 115 5 15 119 6 13 100 7 10 93 8 12 117 9 12 91 10 20 144 11 14 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 177 10 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 249 91 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 161 65 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 169 61 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 164 80 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 250 30 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 169 20 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 175 16 plFiberPlate : 137 possible sky positions to use as objects from a possible 599. plFiberPlate : 66 possible sky positions to use as objects from a possible 598. plFiberPlate : 25 possible sky positions to use as objects from a possible 597. plFiberPlate : 20 possible sky positions to use as objects from a possible 596. plFiberPlate : 40 possible sky positions to use as objects from a possible 595. plFiberPlate : 39 possible sky positions to use as objects from a possible 594. plFiberPlate : 33 possible sky positions to use as objects from a possible 593. plFiberPlate : 73 possible sky positions to use as objects from a possible 592. plFiberPlate : 34 possible sky positions to use as objects from a possible 591. plFiberPlate : 22 possible sky positions to use as objects from a possible 590. plFiberPlate : 6 possible sky positions to use as objects from a possible 589. plFiberPlate : 4 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 8 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 50 possible sky positions to use as objects from a possible 583. plFiberPlate : 21 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 1 possible sky positions to use as objects from a possible 579. plFiberPlate : 1 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 23 possible sky positions to use as objects from a possible 575. plFiberPlate : 51 possible sky positions to use as objects from a possible 574. plFiberPlate : 35 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 8 possible sky positions to use as objects from a possible 570. plFiberPlate : 2 possible sky positions to use as objects from a possible 569. plFiberPlate : 23 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1944.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1945.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1945.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1946.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 131 2 10 111 3 5 95 4 11 102 5 12 117 6 13 100 7 13 99 8 16 106 9 8 117 10 12 162 11 9 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 169 61 plFiberPlate : adding spectro-photo std with objId = 4508 40 6 227 29 plFiberPlate : adding spectro-photo std with objId = 4518 40 2 126 91 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 225 14 plFiberPlate : adding spectro-photo std with objId = 4508 40 4 226 58 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 131 38 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 158 110 plFiberPlate : adding spectro-photo std with objId = 4508 40 6 228 88 plFiberPlate : 124 possible sky positions to use as objects from a possible 615. plFiberPlate : 71 possible sky positions to use as objects from a possible 614. plFiberPlate : 66 possible sky positions to use as objects from a possible 613. plFiberPlate : 43 possible sky positions to use as objects from a possible 612. plFiberPlate : 38 possible sky positions to use as objects from a possible 611. plFiberPlate : 54 possible sky positions to use as objects from a possible 610. plFiberPlate : 73 possible sky positions to use as objects from a possible 609. plFiberPlate : 64 possible sky positions to use as objects from a possible 608. plFiberPlate : 46 possible sky positions to use as objects from a possible 607. plFiberPlate : 36 possible sky positions to use as objects from a possible 606. plFiberPlate : 19 possible sky positions to use as objects from a possible 605. plFiberPlate : 13 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 13 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 31 possible sky positions to use as objects from a possible 600. plFiberPlate : 71 possible sky positions to use as objects from a possible 599. plFiberPlate : 51 possible sky positions to use as objects from a possible 598. plFiberPlate : 40 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 7 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 20 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 47 possible sky positions to use as objects from a possible 590. plFiberPlate : 33 possible sky positions to use as objects from a possible 589. plFiberPlate : 30 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 28 possible sky positions to use as objects from a possible 586. plFiberPlate : 21 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1945.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1946.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1946.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1947.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 91 2 9 47 3 6 62 4 15 99 5 16 112 6 10 100 7 6 88 8 13 124 9 6 116 10 13 130 11 12 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 230 33 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 249 54 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 229 83 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 233 93 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 227 33 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 227 38 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 226 88 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 242 24 plFiberPlate : 124 possible sky positions to use as objects from a possible 545. plFiberPlate : 82 possible sky positions to use as objects from a possible 544. plFiberPlate : 64 possible sky positions to use as objects from a possible 543. plFiberPlate : 33 possible sky positions to use as objects from a possible 542. plFiberPlate : 34 possible sky positions to use as objects from a possible 541. plFiberPlate : 27 possible sky positions to use as objects from a possible 540. plFiberPlate : 34 possible sky positions to use as objects from a possible 539. plFiberPlate : 53 possible sky positions to use as objects from a possible 538. plFiberPlate : 33 possible sky positions to use as objects from a possible 537. plFiberPlate : 15 possible sky positions to use as objects from a possible 536. plFiberPlate : 6 possible sky positions to use as objects from a possible 535. plFiberPlate : 2 possible sky positions to use as objects from a possible 534. plFiberPlate : 5 possible sky positions to use as objects from a possible 533. plFiberPlate : 6 possible sky positions to use as objects from a possible 532. plFiberPlate : 26 possible sky positions to use as objects from a possible 531. plFiberPlate : 16 possible sky positions to use as objects from a possible 530. plFiberPlate : 57 possible sky positions to use as objects from a possible 529. plFiberPlate : 59 possible sky positions to use as objects from a possible 528. plFiberPlate : 48 possible sky positions to use as objects from a possible 527. plFiberPlate : 30 possible sky positions to use as objects from a possible 526. plFiberPlate : 28 possible sky positions to use as objects from a possible 525. plFiberPlate : 10 possible sky positions to use as objects from a possible 524. plFiberPlate : 16 possible sky positions to use as objects from a possible 523. plFiberPlate : 14 possible sky positions to use as objects from a possible 522. plFiberPlate : 40 possible sky positions to use as objects from a possible 521. plFiberPlate : 24 possible sky positions to use as objects from a possible 520. plFiberPlate : 60 possible sky positions to use as objects from a possible 519. plFiberPlate : 42 possible sky positions to use as objects from a possible 518. plFiberPlate : 21 possible sky positions to use as objects from a possible 517. plFiberPlate : 19 possible sky positions to use as objects from a possible 516. plFiberPlate : 13 possible sky positions to use as objects from a possible 515. plFiberPlate : 31 possible sky positions to use as objects from a possible 514. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1946.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1947.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1947.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1948.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 123 2 8 98 3 9 88 4 11 112 5 13 118 6 16 104 7 13 99 8 20 109 9 7 112 10 15 134 11 7 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 266 12 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 259 13 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 184 126 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 250 30 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 253 35 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 38 20 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 175 16 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 192 83 plFiberPlate : 111 possible sky positions to use as objects from a possible 606. plFiberPlate : 69 possible sky positions to use as objects from a possible 605. plFiberPlate : 39 possible sky positions to use as objects from a possible 604. plFiberPlate : 27 possible sky positions to use as objects from a possible 603. plFiberPlate : 39 possible sky positions to use as objects from a possible 602. plFiberPlate : 21 possible sky positions to use as objects from a possible 601. plFiberPlate : 44 possible sky positions to use as objects from a possible 600. plFiberPlate : 79 possible sky positions to use as objects from a possible 599. plFiberPlate : 42 possible sky positions to use as objects from a possible 598. plFiberPlate : 28 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 5 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 67 possible sky positions to use as objects from a possible 590. plFiberPlate : 47 possible sky positions to use as objects from a possible 589. plFiberPlate : 34 possible sky positions to use as objects from a possible 588. plFiberPlate : 29 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 9 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 18 possible sky positions to use as objects from a possible 583. plFiberPlate : 24 possible sky positions to use as objects from a possible 582. plFiberPlate : 34 possible sky positions to use as objects from a possible 581. plFiberPlate : 22 possible sky positions to use as objects from a possible 580. plFiberPlate : 38 possible sky positions to use as objects from a possible 579. plFiberPlate : 21 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 26 possible sky positions to use as objects from a possible 576. plFiberPlate : 17 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1947.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1948.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1948.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1949.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 110 2 11 101 3 14 95 4 15 99 5 11 111 6 7 106 7 2 108 8 8 111 9 6 119 10 16 164 11 13 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 151 2 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 139 42 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 253 35 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 143 40 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 38 20 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 257 48 plFiberPlate : adding spectro-photo std with objId = 4518 40 1 146 48 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 41 59 plFiberPlate : 137 possible sky positions to use as objects from a possible 608. plFiberPlate : 70 possible sky positions to use as objects from a possible 607. plFiberPlate : 44 possible sky positions to use as objects from a possible 606. plFiberPlate : 34 possible sky positions to use as objects from a possible 605. plFiberPlate : 35 possible sky positions to use as objects from a possible 604. plFiberPlate : 20 possible sky positions to use as objects from a possible 603. plFiberPlate : 40 possible sky positions to use as objects from a possible 602. plFiberPlate : 72 possible sky positions to use as objects from a possible 601. plFiberPlate : 59 possible sky positions to use as objects from a possible 600. plFiberPlate : 38 possible sky positions to use as objects from a possible 599. plFiberPlate : 24 possible sky positions to use as objects from a possible 598. plFiberPlate : 14 possible sky positions to use as objects from a possible 597. plFiberPlate : 10 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 18 possible sky positions to use as objects from a possible 594. plFiberPlate : 21 possible sky positions to use as objects from a possible 593. plFiberPlate : 62 possible sky positions to use as objects from a possible 592. plFiberPlate : 38 possible sky positions to use as objects from a possible 591. plFiberPlate : 39 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 13 possible sky positions to use as objects from a possible 587. plFiberPlate : 10 possible sky positions to use as objects from a possible 586. plFiberPlate : 2 possible sky positions to use as objects from a possible 585. plFiberPlate : 28 possible sky positions to use as objects from a possible 584. plFiberPlate : 40 possible sky positions to use as objects from a possible 583. plFiberPlate : 51 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 34 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 4 possible sky positions to use as objects from a possible 578. plFiberPlate : 22 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1948.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1949.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1949.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1950.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 92 2 8 45 3 14 79 4 20 123 5 10 128 6 14 92 7 8 100 8 15 112 9 12 114 10 22 139 11 9 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 260 53 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 253 13 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 263 10 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 244 57 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 251 62 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 252 59 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 257 67 plFiberPlate : adding spectro-photo std with objId = 4518 40 1 146 48 plFiberPlate : 139 possible sky positions to use as objects from a possible 568. plFiberPlate : 50 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 30 possible sky positions to use as objects from a possible 565. plFiberPlate : 14 possible sky positions to use as objects from a possible 564. plFiberPlate : 24 possible sky positions to use as objects from a possible 563. plFiberPlate : 34 possible sky positions to use as objects from a possible 562. plFiberPlate : 79 possible sky positions to use as objects from a possible 561. plFiberPlate : 33 possible sky positions to use as objects from a possible 560. plFiberPlate : 21 possible sky positions to use as objects from a possible 559. plFiberPlate : 15 possible sky positions to use as objects from a possible 558. plFiberPlate : 12 possible sky positions to use as objects from a possible 557. plFiberPlate : 10 possible sky positions to use as objects from a possible 556. plFiberPlate : 7 possible sky positions to use as objects from a possible 555. plFiberPlate : 15 possible sky positions to use as objects from a possible 554. plFiberPlate : 13 possible sky positions to use as objects from a possible 553. plFiberPlate : 72 possible sky positions to use as objects from a possible 552. plFiberPlate : 49 possible sky positions to use as objects from a possible 551. plFiberPlate : 20 possible sky positions to use as objects from a possible 550. plFiberPlate : 6 possible sky positions to use as objects from a possible 549. plFiberPlate : 15 possible sky positions to use as objects from a possible 548. plFiberPlate : 9 possible sky positions to use as objects from a possible 547. plFiberPlate : 9 possible sky positions to use as objects from a possible 546. plFiberPlate : 25 possible sky positions to use as objects from a possible 545. plFiberPlate : 28 possible sky positions to use as objects from a possible 544. plFiberPlate : 16 possible sky positions to use as objects from a possible 543. plFiberPlate : 40 possible sky positions to use as objects from a possible 542. plFiberPlate : 26 possible sky positions to use as objects from a possible 541. plFiberPlate : 11 possible sky positions to use as objects from a possible 540. plFiberPlate : 18 possible sky positions to use as objects from a possible 539. plFiberPlate : 14 possible sky positions to use as objects from a possible 538. plFiberPlate : 29 possible sky positions to use as objects from a possible 537. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1949.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1950.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1950.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1951.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 117 2 10 95 3 11 97 4 16 119 5 17 126 6 14 104 7 9 89 8 9 105 9 5 109 10 16 161 11 13 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 6 271 30 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 195 84 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 275 75 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 273 49 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 268 67 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 199 41 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 200 44 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 192 83 plFiberPlate : 149 possible sky positions to use as objects from a possible 615. plFiberPlate : 64 possible sky positions to use as objects from a possible 614. plFiberPlate : 37 possible sky positions to use as objects from a possible 613. plFiberPlate : 46 possible sky positions to use as objects from a possible 612. plFiberPlate : 26 possible sky positions to use as objects from a possible 611. plFiberPlate : 19 possible sky positions to use as objects from a possible 610. plFiberPlate : 43 possible sky positions to use as objects from a possible 609. plFiberPlate : 81 possible sky positions to use as objects from a possible 608. plFiberPlate : 42 possible sky positions to use as objects from a possible 607. plFiberPlate : 25 possible sky positions to use as objects from a possible 606. plFiberPlate : 11 possible sky positions to use as objects from a possible 605. plFiberPlate : 6 possible sky positions to use as objects from a possible 604. plFiberPlate : 9 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 23 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : 67 possible sky positions to use as objects from a possible 599. plFiberPlate : 40 possible sky positions to use as objects from a possible 598. plFiberPlate : 26 possible sky positions to use as objects from a possible 597. plFiberPlate : 13 possible sky positions to use as objects from a possible 596. plFiberPlate : 8 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 19 possible sky positions to use as objects from a possible 591. plFiberPlate : 65 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 10 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 16 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1950.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1951.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1951.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1952.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 126 2 14 95 3 9 99 4 8 108 5 13 123 6 11 106 7 11 102 8 9 111 9 15 112 10 19 156 11 15 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 164 31 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 58 92 plFiberPlate : adding spectro-photo std with objId = 4518 40 1 167 64 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 159 59 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 267 12 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 51 41 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 57 105 plFiberPlate : adding spectro-photo std with objId = 4469 40 1 273 49 plFiberPlate : 121 possible sky positions to use as objects from a possible 621. plFiberPlate : 48 possible sky positions to use as objects from a possible 620. plFiberPlate : 40 possible sky positions to use as objects from a possible 619. plFiberPlate : 26 possible sky positions to use as objects from a possible 618. plFiberPlate : 31 possible sky positions to use as objects from a possible 617. plFiberPlate : 30 possible sky positions to use as objects from a possible 616. plFiberPlate : 51 possible sky positions to use as objects from a possible 615. plFiberPlate : 69 possible sky positions to use as objects from a possible 614. plFiberPlate : 59 possible sky positions to use as objects from a possible 613. plFiberPlate : 46 possible sky positions to use as objects from a possible 612. plFiberPlate : 28 possible sky positions to use as objects from a possible 611. plFiberPlate : 14 possible sky positions to use as objects from a possible 610. plFiberPlate : 8 possible sky positions to use as objects from a possible 609. plFiberPlate : 17 possible sky positions to use as objects from a possible 608. plFiberPlate : 23 possible sky positions to use as objects from a possible 607. plFiberPlate : 24 possible sky positions to use as objects from a possible 606. plFiberPlate : 76 possible sky positions to use as objects from a possible 605. plFiberPlate : 52 possible sky positions to use as objects from a possible 604. plFiberPlate : 32 possible sky positions to use as objects from a possible 603. plFiberPlate : 20 possible sky positions to use as objects from a possible 602. plFiberPlate : 18 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 21 possible sky positions to use as objects from a possible 599. plFiberPlate : 14 possible sky positions to use as objects from a possible 598. plFiberPlate : 23 possible sky positions to use as objects from a possible 597. plFiberPlate : 29 possible sky positions to use as objects from a possible 596. plFiberPlate : 50 possible sky positions to use as objects from a possible 595. plFiberPlate : 40 possible sky positions to use as objects from a possible 594. plFiberPlate : 19 possible sky positions to use as objects from a possible 593. plFiberPlate : 15 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1951.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1952.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1952.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1953.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 98 2 4 50 3 5 75 4 13 109 5 14 133 6 12 92 7 11 100 8 13 105 9 7 122 10 12 127 11 7 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 263 10 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 257 28 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 267 12 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 269 113 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 270 34 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 257 48 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 261 25 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 265 70 plFiberPlate : 126 possible sky positions to use as objects from a possible 569. plFiberPlate : 51 possible sky positions to use as objects from a possible 568. plFiberPlate : 45 possible sky positions to use as objects from a possible 567. plFiberPlate : 30 possible sky positions to use as objects from a possible 566. plFiberPlate : 16 possible sky positions to use as objects from a possible 565. plFiberPlate : 36 possible sky positions to use as objects from a possible 564. plFiberPlate : 50 possible sky positions to use as objects from a possible 563. plFiberPlate : 78 possible sky positions to use as objects from a possible 562. plFiberPlate : 33 possible sky positions to use as objects from a possible 561. plFiberPlate : 24 possible sky positions to use as objects from a possible 560. plFiberPlate : 18 possible sky positions to use as objects from a possible 559. plFiberPlate : 6 possible sky positions to use as objects from a possible 558. plFiberPlate : 18 possible sky positions to use as objects from a possible 557. plFiberPlate : 16 possible sky positions to use as objects from a possible 556. plFiberPlate : 8 possible sky positions to use as objects from a possible 555. plFiberPlate : 25 possible sky positions to use as objects from a possible 554. plFiberPlate : 78 possible sky positions to use as objects from a possible 553. plFiberPlate : 51 possible sky positions to use as objects from a possible 552. plFiberPlate : 33 possible sky positions to use as objects from a possible 551. plFiberPlate : 19 possible sky positions to use as objects from a possible 550. plFiberPlate : 14 possible sky positions to use as objects from a possible 549. plFiberPlate : 17 possible sky positions to use as objects from a possible 548. plFiberPlate : 19 possible sky positions to use as objects from a possible 547. plFiberPlate : 10 possible sky positions to use as objects from a possible 546. plFiberPlate : 11 possible sky positions to use as objects from a possible 545. plFiberPlate : 57 possible sky positions to use as objects from a possible 544. plFiberPlate : 45 possible sky positions to use as objects from a possible 543. plFiberPlate : 33 possible sky positions to use as objects from a possible 542. plFiberPlate : 20 possible sky positions to use as objects from a possible 541. plFiberPlate : 17 possible sky positions to use as objects from a possible 540. plFiberPlate : 25 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1952.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1953.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1953.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1954.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 131 2 11 103 3 8 90 4 7 111 5 10 131 6 12 111 7 5 88 8 4 106 9 10 107 10 20 147 11 10 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 218 2 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 209 24 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 285 43 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 216 17 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 275 75 plFiberPlate : adding spectro-photo std with objId = 4469 40 4 282 5 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 218 89 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 207 99 plFiberPlate : 115 possible sky positions to use as objects from a possible 622. plFiberPlate : 89 possible sky positions to use as objects from a possible 621. plFiberPlate : 52 possible sky positions to use as objects from a possible 620. plFiberPlate : 41 possible sky positions to use as objects from a possible 619. plFiberPlate : 25 possible sky positions to use as objects from a possible 618. plFiberPlate : 19 possible sky positions to use as objects from a possible 617. plFiberPlate : 76 possible sky positions to use as objects from a possible 616. plFiberPlate : 72 possible sky positions to use as objects from a possible 615. plFiberPlate : 48 possible sky positions to use as objects from a possible 614. plFiberPlate : 20 possible sky positions to use as objects from a possible 613. plFiberPlate : 11 possible sky positions to use as objects from a possible 612. plFiberPlate : 9 possible sky positions to use as objects from a possible 611. plFiberPlate : 9 possible sky positions to use as objects from a possible 610. plFiberPlate : 25 possible sky positions to use as objects from a possible 609. plFiberPlate : 14 possible sky positions to use as objects from a possible 608. plFiberPlate : 16 possible sky positions to use as objects from a possible 607. plFiberPlate : 32 possible sky positions to use as objects from a possible 606. plFiberPlate : 34 possible sky positions to use as objects from a possible 605. plFiberPlate : 26 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 10 possible sky positions to use as objects from a possible 600. plFiberPlate : 11 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 69 possible sky positions to use as objects from a possible 597. plFiberPlate : 28 possible sky positions to use as objects from a possible 596. plFiberPlate : 15 possible sky positions to use as objects from a possible 595. plFiberPlate : 18 possible sky positions to use as objects from a possible 594. plFiberPlate : 14 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1953.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1954.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1954.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1955.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 120 2 3 103 3 3 108 4 10 115 5 10 120 6 9 111 7 8 99 8 10 111 9 9 105 10 9 157 11 6 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 5 173 111 plFiberPlate : adding spectro-photo std with objId = 4392 40 5 57 126 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 59 8 plFiberPlate : adding spectro-photo std with objId = 4518 40 1 172 93 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 58 92 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 280 14 plFiberPlate : adding spectro-photo std with objId = 4518 40 4 175 18 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 207 99 plFiberPlate : 130 possible sky positions to use as objects from a possible 621. plFiberPlate : 49 possible sky positions to use as objects from a possible 620. plFiberPlate : 31 possible sky positions to use as objects from a possible 619. plFiberPlate : 37 possible sky positions to use as objects from a possible 618. plFiberPlate : 18 possible sky positions to use as objects from a possible 617. plFiberPlate : 20 possible sky positions to use as objects from a possible 616. plFiberPlate : 33 possible sky positions to use as objects from a possible 615. plFiberPlate : 69 possible sky positions to use as objects from a possible 614. plFiberPlate : 36 possible sky positions to use as objects from a possible 613. plFiberPlate : 20 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 19 possible sky positions to use as objects from a possible 610. plFiberPlate : 8 possible sky positions to use as objects from a possible 609. plFiberPlate : 13 possible sky positions to use as objects from a possible 608. plFiberPlate : 10 possible sky positions to use as objects from a possible 607. plFiberPlate : 14 possible sky positions to use as objects from a possible 606. plFiberPlate : 38 possible sky positions to use as objects from a possible 605. plFiberPlate : 36 possible sky positions to use as objects from a possible 604. plFiberPlate : 18 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 14 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 25 possible sky positions to use as objects from a possible 598. plFiberPlate : 11 possible sky positions to use as objects from a possible 597. plFiberPlate : 57 possible sky positions to use as objects from a possible 596. plFiberPlate : 46 possible sky positions to use as objects from a possible 595. plFiberPlate : 28 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1954.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1955.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1955.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1956.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 105 2 5 51 3 7 74 4 13 116 5 12 115 6 6 96 7 5 95 8 12 109 9 10 98 10 13 142 11 10 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 1 272 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 272 114 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 280 14 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 269 113 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 270 34 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 285 13 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 283 2 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 292 101 plFiberPlate : 129 possible sky positions to use as objects from a possible 563. plFiberPlate : 85 possible sky positions to use as objects from a possible 562. plFiberPlate : 43 possible sky positions to use as objects from a possible 561. plFiberPlate : 20 possible sky positions to use as objects from a possible 560. plFiberPlate : 17 possible sky positions to use as objects from a possible 559. plFiberPlate : 21 possible sky positions to use as objects from a possible 558. plFiberPlate : 56 possible sky positions to use as objects from a possible 557. plFiberPlate : 84 possible sky positions to use as objects from a possible 556. plFiberPlate : 63 possible sky positions to use as objects from a possible 555. plFiberPlate : 45 possible sky positions to use as objects from a possible 554. plFiberPlate : 20 possible sky positions to use as objects from a possible 553. plFiberPlate : 14 possible sky positions to use as objects from a possible 552. plFiberPlate : 22 possible sky positions to use as objects from a possible 551. plFiberPlate : 8 possible sky positions to use as objects from a possible 550. plFiberPlate : 22 possible sky positions to use as objects from a possible 549. plFiberPlate : 29 possible sky positions to use as objects from a possible 548. plFiberPlate : 68 possible sky positions to use as objects from a possible 547. plFiberPlate : 39 possible sky positions to use as objects from a possible 546. plFiberPlate : 27 possible sky positions to use as objects from a possible 545. plFiberPlate : 16 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 13 possible sky positions to use as objects from a possible 542. plFiberPlate : 5 possible sky positions to use as objects from a possible 541. plFiberPlate : 20 possible sky positions to use as objects from a possible 540. plFiberPlate : 21 possible sky positions to use as objects from a possible 539. plFiberPlate : 47 possible sky positions to use as objects from a possible 538. plFiberPlate : 40 possible sky positions to use as objects from a possible 537. plFiberPlate : 28 possible sky positions to use as objects from a possible 536. plFiberPlate : 12 possible sky positions to use as objects from a possible 535. plFiberPlate : 20 possible sky positions to use as objects from a possible 534. plFiberPlate : 7 possible sky positions to use as objects from a possible 533. plFiberPlate : 14 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1955.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1956.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1956.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1957.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 122 2 13 103 3 7 97 4 8 107 5 13 122 6 10 89 7 8 88 8 20 122 9 6 95 10 17 143 11 15 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 225 21 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 216 17 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 294 6 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 230 83 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 218 89 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 225 23 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 229 70 plFiberPlate : adding spectro-photo std with objId = 4469 40 3 299 46 plFiberPlate : 130 possible sky positions to use as objects from a possible 594. plFiberPlate : 69 possible sky positions to use as objects from a possible 593. plFiberPlate : 32 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 28 possible sky positions to use as objects from a possible 590. plFiberPlate : 20 possible sky positions to use as objects from a possible 589. plFiberPlate : 48 possible sky positions to use as objects from a possible 588. plFiberPlate : 67 possible sky positions to use as objects from a possible 587. plFiberPlate : 42 possible sky positions to use as objects from a possible 586. plFiberPlate : 20 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 2 possible sky positions to use as objects from a possible 583. plFiberPlate : 4 possible sky positions to use as objects from a possible 582. plFiberPlate : 4 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 15 possible sky positions to use as objects from a possible 579. plFiberPlate : 81 possible sky positions to use as objects from a possible 578. plFiberPlate : 57 possible sky positions to use as objects from a possible 577. plFiberPlate : 37 possible sky positions to use as objects from a possible 576. plFiberPlate : 24 possible sky positions to use as objects from a possible 575. plFiberPlate : 3 possible sky positions to use as objects from a possible 574. plFiberPlate : 11 possible sky positions to use as objects from a possible 573. plFiberPlate : 13 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 45 possible sky positions to use as objects from a possible 570. plFiberPlate : 31 possible sky positions to use as objects from a possible 569. plFiberPlate : 4 possible sky positions to use as objects from a possible 568. plFiberPlate : 0 possible sky positions to use as objects from a possible 567. plFiberPlate: No sky found for bundle at -8.067 220.619, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 567. plFiberPlate: No sky found for bundle at -8.067 220.619, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 567. plFiberPlate: No sky found for bundle at -8.067 220.619, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 567. plFiberPlate: No sky found for bundle at -8.067 220.619, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 567. plFiberPlate: No sky found for bundle at -8.067 220.619, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 567. plFiberPlate: No sky found for bundle at -8.067 220.619, increase box by 60 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 567. plFiberPlate : 1 possible sky positions to use as objects from a possible 566. plFiberPlate : 8 possible sky positions to use as objects from a possible 565. plFiberPlate : 5 possible sky positions to use as objects from a possible 564. plFiberPlate : 16 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1956.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1957.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1957.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1958.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 124 2 10 105 3 10 88 4 11 121 5 15 138 6 12 97 7 6 86 8 11 109 9 13 105 10 16 155 11 12 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4518 40 3 181 43 plFiberPlate : adding spectro-photo std with objId = 4518 40 2 183 35 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 75 38 plFiberPlate : adding spectro-photo std with objId = 4392 40 6 75 40 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 77 49 plFiberPlate : adding spectro-photo std with objId = 4392 40 2 79 6 plFiberPlate : adding spectro-photo std with objId = 4392 40 4 85 59 plFiberPlate : adding spectro-photo std with objId = 4392 40 1 74 16 plFiberPlate : 118 possible sky positions to use as objects from a possible 625. plFiberPlate : 87 possible sky positions to use as objects from a possible 624. plFiberPlate : 60 possible sky positions to use as objects from a possible 623. plFiberPlate : 39 possible sky positions to use as objects from a possible 622. plFiberPlate : 42 possible sky positions to use as objects from a possible 621. plFiberPlate : 55 possible sky positions to use as objects from a possible 620. plFiberPlate : 44 possible sky positions to use as objects from a possible 619. plFiberPlate : 92 possible sky positions to use as objects from a possible 618. plFiberPlate : 61 possible sky positions to use as objects from a possible 617. plFiberPlate : 44 possible sky positions to use as objects from a possible 616. plFiberPlate : 23 possible sky positions to use as objects from a possible 615. plFiberPlate : 11 possible sky positions to use as objects from a possible 614. plFiberPlate : 14 possible sky positions to use as objects from a possible 613. plFiberPlate : 6 possible sky positions to use as objects from a possible 612. plFiberPlate : 5 possible sky positions to use as objects from a possible 611. plFiberPlate : 27 possible sky positions to use as objects from a possible 610. plFiberPlate : 92 possible sky positions to use as objects from a possible 609. plFiberPlate : 37 possible sky positions to use as objects from a possible 608. plFiberPlate : 34 possible sky positions to use as objects from a possible 607. plFiberPlate : 11 possible sky positions to use as objects from a possible 606. plFiberPlate : 14 possible sky positions to use as objects from a possible 605. plFiberPlate : 5 possible sky positions to use as objects from a possible 604. plFiberPlate : 17 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 28 possible sky positions to use as objects from a possible 601. plFiberPlate : 43 possible sky positions to use as objects from a possible 600. plFiberPlate : 44 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 12 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 28 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1957.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1958.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1958.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.07.2/plPlugMapP-1959.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 90 2 2 42 3 6 69 4 15 116 5 8 113 6 8 87 7 8 94 8 12 110 9 9 110 10 12 123 11 4 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 297 117 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 284 51 plFiberPlate : adding spectro-photo std with objId = 4392 40 1 74 16 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 287 48 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 297 12 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 296 31 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 292 101 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 283 2 plFiberPlate : 128 possible sky positions to use as objects from a possible 541. plFiberPlate : 41 possible sky positions to use as objects from a possible 540. plFiberPlate : 28 possible sky positions to use as objects from a possible 539. plFiberPlate : 23 possible sky positions to use as objects from a possible 538. plFiberPlate : 22 possible sky positions to use as objects from a possible 537. plFiberPlate : 13 possible sky positions to use as objects from a possible 536. plFiberPlate : 36 possible sky positions to use as objects from a possible 535. plFiberPlate : 74 possible sky positions to use as objects from a possible 534. plFiberPlate : 30 possible sky positions to use as objects from a possible 533. plFiberPlate : 19 possible sky positions to use as objects from a possible 532. plFiberPlate : 7 possible sky positions to use as objects from a possible 531. plFiberPlate : 13 possible sky positions to use as objects from a possible 530. plFiberPlate : 16 possible sky positions to use as objects from a possible 529. plFiberPlate : 4 possible sky positions to use as objects from a possible 528. plFiberPlate : 18 possible sky positions to use as objects from a possible 527. plFiberPlate : 20 possible sky positions to use as objects from a possible 526. plFiberPlate : 72 possible sky positions to use as objects from a possible 525. plFiberPlate : 52 possible sky positions to use as objects from a possible 524. plFiberPlate : 25 possible sky positions to use as objects from a possible 523. plFiberPlate : 21 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 18 possible sky positions to use as objects from a possible 520. plFiberPlate : 11 possible sky positions to use as objects from a possible 519. plFiberPlate : 12 possible sky positions to use as objects from a possible 518. plFiberPlate : 29 possible sky positions to use as objects from a possible 517. plFiberPlate : 47 possible sky positions to use as objects from a possible 516. plFiberPlate : 38 possible sky positions to use as objects from a possible 515. plFiberPlate : 31 possible sky positions to use as objects from a possible 514. plFiberPlate : 19 possible sky positions to use as objects from a possible 513. plFiberPlate : 21 possible sky positions to use as objects from a possible 512. plFiberPlate : 20 possible sky positions to use as objects from a possible 511. plFiberPlate : 26 possible sky positions to use as objects from a possible 510. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1958.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1959.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.07.2/plOverlay-1959.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Jul 14 16:47:52 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_20/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_20/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 40 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1920.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.2076,9.1042) and (-4.90,11.62) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1920.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.9199,10.1781) and (12.32,0.46) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1920.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1921.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9646,4.4174) and (12.32,3.44) plMakeFanucCodes : fixed path between (12.3168,3.4430) and (12.56,1.84) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1921.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.2339,-9.2334) and (3.50,-12.30) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1921.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1922.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.9913,9.8629) and (6.60,10.82) plMakeFanucCodes : fixed path between (6.5991,10.8233) and (5.10,11.71) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1922.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.2207,-8.0465) and (12.60,0.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1922.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1923.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2069,6.0754) and (11.55,5.51) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1923.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1923.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.8419,9.5355) and (-1.36,12.61) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1924.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1924.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.3727,8.5050) and (-12.50,2.36) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1924.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1925.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1925.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1925.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1926.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.7837,4.7190) and (12.38,3.06) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1926.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1926.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1927.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.7680,11.8566) and (-3.96,12.08) plMakeFanucCodes : fixed path between (-11.4460,-5.7122) and (-11.93,-4.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1927.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1927.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1928.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1928.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1928.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1929.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1929.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.4454,8.3073) and (4.08,11.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1929.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1930.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1930.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1930.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1931.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.0745,-10.6251) and (5.34,-11.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1931.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1931.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1932.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1932.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1932.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1933.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1933.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1933.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1934.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4556,5.6751) and (12.03,4.00) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1934.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1934.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1935.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.0405,7.5116) and (-11.34,5.27) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1935.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1935.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1936.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1936.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1936.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1937.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.4640,-9.5511) and (7.39,-10.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1937.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1937.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1938.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1938.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1938.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1939.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8755,4.0821) and (12.50,2.57) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1939.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1939.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1940.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1940.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1940.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1941.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3772,3.1313) and (-12.64,1.68) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1941.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1941.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1942.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.2776,-10.3334) and (-6.00,-11.29) plMakeFanucCodes : fixed path between (6.2207,10.8637) and (2.65,12.45) plMakeFanucCodes : fixed path between (-12.1203,3.2726) and (-12.58,2.14) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1942.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1942.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1943.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1943.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.9930,-11.1484) and (-2.95,-12.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1943.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1944.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1944.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1944.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1945.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.6695,-6.8834) and (-11.50,-5.61) plMakeFanucCodes : fixed path between (11.3406,5.9234) and (11.59,5.41) plMakeFanucCodes : fixed path between (11.5948,5.4087) and (12.03,3.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1945.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1945.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1946.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6500,-10.9371) and (-4.95,-11.62) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1946.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1946.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1947.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.8710,6.1368) and (11.79,4.68) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1947.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1947.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1948.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1948.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1948.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1949.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.3265,-5.8167) and (-11.95,-4.51) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1949.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1949.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1950.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1950.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1950.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1951.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1951.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1951.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1952.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1952.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.4157,11.5504) and (-0.37,11.88) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1952.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1953.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.5481,7.1586) and (-11.18,6.06) plMakeFanucCodes : fixed path between (-11.0204,-6.3790) and (-11.53,-5.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1953.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1953.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1954.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1954.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1954.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1955.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1955.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1955.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1956.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1956.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1956.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1957.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1957.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1957.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1958.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.2666,11.4360) and (4.13,12.01) plMakeFanucCodes : fixed path between (12.0367,-4.1070) and (12.61,-1.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1958.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1958.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1959.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.9837,6.4109) and (11.38,3.53) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1959.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.07.2/plFanuc-1959.par plMakeFanucCodes : temperature difference 22.6 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048002 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Jul 14 16:49:34 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_20/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_20/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8bf1324 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 40 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1920 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1921 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1922 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1923 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1924 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1925 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1926 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1927 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1928 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1929 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1930 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1931 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1932 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1933 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1934 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1935 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1936 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1937 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1938 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1939 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1940 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1941 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1942 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1943 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1944 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1945 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1946 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1947 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1948 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1949 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1950 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1951 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1952 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1953 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1954 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1955 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1956 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1957 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1958 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1959 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.6 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Jul 14 16:50:05 CDT 2004 Begin running "plateEnder dr2004.07.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_20/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_20/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.07.2 -morePipes 1" failed. PS: Read file for stderr output of this job.