Sender: LSF System Subject: Job 20989: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Sep 15 10:36:07 2004 Results reported at Wed Sep 15 10:37:14 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v16_66 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.09.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 45.17 sec. Max Memory : 11 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Sep 15 10:36:15 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Sep 15 10:36:21 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/sdsscp/v1_41/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/oraLoader/v1_4/NULL/bin:/opt/oracle/product/9.2.0/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_3/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v16_66/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Wed Sep 15 10:36:21 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v16_66/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_3/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL ORALOADER_DIR=/sdss/ups/prd/oraLoader/v1_4/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_41/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSORACLE_DIR=/sdss/ups/prd/sdssoracle/v1_0/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_FEySx9 --------------------------------------------------------------- --------------------------------------------------------------- Wed Sep 15 10:36:23 CDT 2004 Begin running plate --------------------------------------------------------------- Wed Sep 15 10:36:23 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8c18ad4 makePlates : beginning loop over plObs chain; makePlates : making 5 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapT-9544.par makePlates : plateInfo struct for plate 1964 : (h4).mjd 53293 (h4).raCen 322.4027 (h4).decCen 0.105343 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 6.2 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 322.403 0.105 322.403 1.605 plMakePlateFromTile : mjd of obs : 53293.473080 Observed HA/dec of plate center, fiducial point (deg) : -22.000 0.138 -22.000 1.637 The rotation angle of the fid. point is 30.261152 plMakePlateFromTile : beginning loop over 1209 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapT-9545.par makePlates : plateInfo struct for plate 1965 : (h4).mjd 53293 (h4).raCen 324.02 (h4).decCen -0.025976 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 6.2 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 324.020 -0.026 324.020 1.474 plMakePlateFromTile : mjd of obs : 53293.472018 Observed HA/dec of plate center, fiducial point (deg) : -24.000 0.007 -24.000 1.507 The rotation angle of the fid. point is 32.269990 plMakePlateFromTile : beginning loop over 1263 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapT-9546.par makePlates : plateInfo struct for plate 1966 : (h4).mjd 53293 (h4).raCen 325.8144 (h4).decCen -0.04689807 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 6.2 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 325.814 -0.047 325.814 1.453 plMakePlateFromTile : mjd of obs : 53293.515784 Observed HA/dec of plate center, fiducial point (deg) : -10.000 -0.014 -10.000 1.485 The rotation angle of the fid. point is 15.071496 plMakePlateFromTile : beginning loop over 1282 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapT-9547.par makePlates : plateInfo struct for plate 1967 : (h4).mjd 53293 (h4).raCen 327.9088 (h4).decCen -0.001687655 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 6.2 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 327.909 -0.002 327.909 1.498 plMakePlateFromTile : mjd of obs : 53293.516045 Observed HA/dec of plate center, fiducial point (deg) : -12.000 0.032 -12.000 1.531 The rotation angle of the fid. point is 17.894323 plMakePlateFromTile : beginning loop over 1259 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapT-9548.par makePlates : plateInfo struct for plate 1968 : (h4).mjd 53293 (h4).raCen 329.7463 (h4).decCen -0.04405917 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 6.2 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 329.746 -0.044 329.746 1.456 plMakePlateFromTile : mjd of obs : 53293.515593 Observed HA/dec of plate center, fiducial point (deg) : -14.000 -0.010 -14.000 1.489 The rotation angle of the fid. point is 20.573008 plMakePlateFromTile : beginning loop over 1335 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Sep 15 10:36:32 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 5 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapP-1964.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 353 to list of science objects plFiberPlate : adding sky number 165 to list of science objects plFiberPlate : adding sky number 328 to list of science objects plFiberPlate : adding sky number 333 to list of science objects plFiberPlate : adding sky number 380 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 318 to list of science objects plFiberPlate : adding sky number 114 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 196 to list of science objects plFiberPlate : adding sky number 257 to list of science objects plFiberPlate : adding sky number 149 to list of science objects plFiberPlate : adding sky number 209 to list of science objects plFiberPlate : adding sky number 387 to list of science objects plFiberPlate : adding sky number 371 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 94 2 13 70 3 13 83 4 17 92 5 7 84 6 8 41 7 6 44 8 6 66 9 3 71 10 18 113 11 14 79 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 124 150 plFiberPlate : adding spectro-photo std with objId = 2583 0 3 130 157 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 123 71 plFiberPlate : adding spectro-photo std with objId = 2662 0 2 26 134 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 25 8 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 127 55 plFiberPlate : 103 possible sky positions to use as objects from a possible 405. plFiberPlate : 76 possible sky positions to use as objects from a possible 404. plFiberPlate : 28 possible sky positions to use as objects from a possible 403. plFiberPlate : 12 possible sky positions to use as objects from a possible 402. plFiberPlate : 7 possible sky positions to use as objects from a possible 401. plFiberPlate : 49 possible sky positions to use as objects from a possible 400. plFiberPlate : 27 possible sky positions to use as objects from a possible 399. plFiberPlate : 52 possible sky positions to use as objects from a possible 398. plFiberPlate : 28 possible sky positions to use as objects from a possible 397. plFiberPlate : 12 possible sky positions to use as objects from a possible 396. plFiberPlate : 1 possible sky positions to use as objects from a possible 395. plFiberPlate : 1 possible sky positions to use as objects from a possible 394. plFiberPlate : 0 possible sky positions to use as objects from a possible 393. plFiberPlate: No sky found for bundle at 17.104 -63.852, increase box by 10 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 393. plFiberPlate : 3 possible sky positions to use as objects from a possible 392. plFiberPlate : 17 possible sky positions to use as objects from a possible 391. plFiberPlate : 26 possible sky positions to use as objects from a possible 390. plFiberPlate : 57 possible sky positions to use as objects from a possible 389. plFiberPlate : 30 possible sky positions to use as objects from a possible 388. plFiberPlate : 16 possible sky positions to use as objects from a possible 387. plFiberPlate : 8 possible sky positions to use as objects from a possible 386. plFiberPlate : 9 possible sky positions to use as objects from a possible 385. plFiberPlate : 7 possible sky positions to use as objects from a possible 384. plFiberPlate : 12 possible sky positions to use as objects from a possible 383. plFiberPlate : 7 possible sky positions to use as objects from a possible 382. plFiberPlate : 4 possible sky positions to use as objects from a possible 381. plFiberPlate : 28 possible sky positions to use as objects from a possible 380. plFiberPlate : 21 possible sky positions to use as objects from a possible 379. plFiberPlate : 17 possible sky positions to use as objects from a possible 378. plFiberPlate : 9 possible sky positions to use as objects from a possible 377. plFiberPlate : 14 possible sky positions to use as objects from a possible 376. plFiberPlate : 13 possible sky positions to use as objects from a possible 375. plFiberPlate : 8 possible sky positions to use as objects from a possible 374. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1964.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1964.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapP-1965.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 294 to list of science objects plFiberPlate : adding sky number 332 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 279 to list of science objects plFiberPlate : adding sky number 7 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 367 to list of science objects plFiberPlate : adding sky number 71 to list of science objects plFiberPlate : adding sky number 182 to list of science objects plFiberPlate : adding sky number 58 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 451 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 230 to list of science objects plFiberPlate : adding sky number 376 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 101 2 13 72 3 12 61 4 18 84 5 9 85 6 8 57 7 7 58 8 5 92 9 5 69 10 18 115 11 13 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 137 177 plFiberPlate : adding spectro-photo std with objId = 2662 0 1 45 94 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 39 13 plFiberPlate : adding spectro-photo std with objId = 2662 0 5 38 84 plFiberPlate : adding spectro-photo std with objId = 2662 0 4 45 102 plFiberPlate : adding spectro-photo std with objId = 2583 0 5 148 76 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 145 62 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 132 61 plFiberPlate : 78 possible sky positions to use as objects from a possible 448. plFiberPlate : 58 possible sky positions to use as objects from a possible 447. plFiberPlate : 26 possible sky positions to use as objects from a possible 446. plFiberPlate : 27 possible sky positions to use as objects from a possible 445. plFiberPlate : 27 possible sky positions to use as objects from a possible 444. plFiberPlate : 25 possible sky positions to use as objects from a possible 443. plFiberPlate : 38 possible sky positions to use as objects from a possible 442. plFiberPlate : 48 possible sky positions to use as objects from a possible 441. plFiberPlate : 29 possible sky positions to use as objects from a possible 440. plFiberPlate : 26 possible sky positions to use as objects from a possible 439. plFiberPlate : 18 possible sky positions to use as objects from a possible 438. plFiberPlate : 3 possible sky positions to use as objects from a possible 437. plFiberPlate : 10 possible sky positions to use as objects from a possible 436. plFiberPlate : 15 possible sky positions to use as objects from a possible 435. plFiberPlate : 18 possible sky positions to use as objects from a possible 434. plFiberPlate : 11 possible sky positions to use as objects from a possible 433. plFiberPlate : 39 possible sky positions to use as objects from a possible 432. plFiberPlate : 29 possible sky positions to use as objects from a possible 431. plFiberPlate : 10 possible sky positions to use as objects from a possible 430. plFiberPlate : 5 possible sky positions to use as objects from a possible 429. plFiberPlate : 1 possible sky positions to use as objects from a possible 428. plFiberPlate : 3 possible sky positions to use as objects from a possible 427. plFiberPlate : 8 possible sky positions to use as objects from a possible 426. plFiberPlate : 14 possible sky positions to use as objects from a possible 425. plFiberPlate : 25 possible sky positions to use as objects from a possible 424. plFiberPlate : 37 possible sky positions to use as objects from a possible 423. plFiberPlate : 18 possible sky positions to use as objects from a possible 422. plFiberPlate : 8 possible sky positions to use as objects from a possible 421. plFiberPlate : 5 possible sky positions to use as objects from a possible 420. plFiberPlate : 17 possible sky positions to use as objects from a possible 419. plFiberPlate : 6 possible sky positions to use as objects from a possible 418. plFiberPlate : 20 possible sky positions to use as objects from a possible 417. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1964.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1965.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1965.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapP-1966.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 143 to list of science objects plFiberPlate : adding sky number 307 to list of science objects plFiberPlate : adding sky number 252 to list of science objects plFiberPlate : adding sky number 237 to list of science objects plFiberPlate : adding sky number 466 to list of science objects plFiberPlate : adding sky number 140 to list of science objects plFiberPlate : adding sky number 368 to list of science objects plFiberPlate : adding sky number 251 to list of science objects plFiberPlate : adding sky number 366 to list of science objects plFiberPlate : adding sky number 190 to list of science objects plFiberPlate : adding sky number 422 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 166 to list of science objects plFiberPlate : adding sky number 380 to list of science objects plFiberPlate : adding sky number 431 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 97 2 14 61 3 12 60 4 13 84 5 4 106 6 6 73 7 10 59 8 21 89 9 3 92 10 25 122 11 21 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2662 0 3 50 154 plFiberPlate : adding spectro-photo std with objId = 2583 0 6 158 101 plFiberPlate : adding spectro-photo std with objId = 2583 0 2 148 40 plFiberPlate : adding spectro-photo std with objId = 2583 0 1 157 146 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 145 62 plFiberPlate : adding spectro-photo std with objId = 2662 0 3 54 122 plFiberPlate : adding spectro-photo std with objId = 2662 0 6 54 27 plFiberPlate : adding spectro-photo std with objId = 2583 0 4 149 108 plFiberPlate : 93 possible sky positions to use as objects from a possible 469. plFiberPlate : 76 possible sky positions to use as objects from a possible 468. plFiberPlate : 36 possible sky positions to use as objects from a possible 467. plFiberPlate : 36 possible sky positions to use as objects from a possible 466. plFiberPlate : 13 possible sky positions to use as objects from a possible 465. plFiberPlate : 13 possible sky positions to use as objects from a possible 464. plFiberPlate : 44 possible sky positions to use as objects from a possible 463. plFiberPlate : 62 possible sky positions to use as objects from a possible 462. plFiberPlate : 40 possible sky positions to use as objects from a possible 461. plFiberPlate : 36 possible sky positions to use as objects from a possible 460. plFiberPlate : 16 possible sky positions to use as objects from a possible 459. plFiberPlate : 11 possible sky positions to use as objects from a possible 458. plFiberPlate : 12 possible sky positions to use as objects from a possible 457. plFiberPlate : 15 possible sky positions to use as objects from a possible 456. plFiberPlate : 19 possible sky positions to use as objects from a possible 455. plFiberPlate : 11 possible sky positions to use as objects from a possible 454. plFiberPlate : 68 possible sky positions to use as objects from a possible 453. plFiberPlate : 59 possible sky positions to use as objects from a possible 452. plFiberPlate : 35 possible sky positions to use as objects from a possible 451. plFiberPlate : 21 possible sky positions to use as objects from a possible 450. plFiberPlate : 13 possible sky positions to use as objects from a possible 449. plFiberPlate : 11 possible sky positions to use as objects from a possible 448. plFiberPlate : 11 possible sky positions to use as objects from a possible 447. plFiberPlate : 9 possible sky positions to use as objects from a possible 446. plFiberPlate : 21 possible sky positions to use as objects from a possible 445. plFiberPlate : 44 possible sky positions to use as objects from a possible 444. plFiberPlate : 12 possible sky positions to use as objects from a possible 443. plFiberPlate : 8 possible sky positions to use as objects from a possible 442. plFiberPlate : 8 possible sky positions to use as objects from a possible 441. plFiberPlate : 6 possible sky positions to use as objects from a possible 440. plFiberPlate : 15 possible sky positions to use as objects from a possible 439. plFiberPlate : 6 possible sky positions to use as objects from a possible 438. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1965.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1966.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1966.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapP-1967.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 27 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 204 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 74 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 24 to list of science objects plFiberPlate : adding sky number 7 to list of science objects plFiberPlate : adding sky number 173 to list of science objects plFiberPlate : adding sky number 23 to list of science objects plFiberPlate : adding sky number 90 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 339 to list of science objects plFiberPlate : adding sky number 319 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 92 2 11 68 3 11 47 4 17 53 5 16 65 6 11 51 7 8 54 8 13 81 9 17 74 10 21 116 11 20 88 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1033 1 2 73 45 plFiberPlate : adding spectro-photo std with objId = 1033 1 3 68 77 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 32 98 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 30 118 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 71 65 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 18 147 plFiberPlate : adding spectro-photo std with objId = 1056 1 5 31 81 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 31 94 plFiberPlate : 82 possible sky positions to use as objects from a possible 374. plFiberPlate : 58 possible sky positions to use as objects from a possible 373. plFiberPlate : 38 possible sky positions to use as objects from a possible 372. plFiberPlate : 25 possible sky positions to use as objects from a possible 371. plFiberPlate : 32 possible sky positions to use as objects from a possible 370. plFiberPlate : 24 possible sky positions to use as objects from a possible 369. plFiberPlate : 30 possible sky positions to use as objects from a possible 368. plFiberPlate : 57 possible sky positions to use as objects from a possible 367. plFiberPlate : 49 possible sky positions to use as objects from a possible 366. plFiberPlate : 22 possible sky positions to use as objects from a possible 365. plFiberPlate : 9 possible sky positions to use as objects from a possible 364. plFiberPlate : 12 possible sky positions to use as objects from a possible 363. plFiberPlate : 11 possible sky positions to use as objects from a possible 362. plFiberPlate : 15 possible sky positions to use as objects from a possible 361. plFiberPlate : 14 possible sky positions to use as objects from a possible 360. plFiberPlate : 15 possible sky positions to use as objects from a possible 359. plFiberPlate : 40 possible sky positions to use as objects from a possible 358. plFiberPlate : 35 possible sky positions to use as objects from a possible 357. plFiberPlate : 15 possible sky positions to use as objects from a possible 356. plFiberPlate : 9 possible sky positions to use as objects from a possible 355. plFiberPlate : 6 possible sky positions to use as objects from a possible 354. plFiberPlate : 5 possible sky positions to use as objects from a possible 353. plFiberPlate : 5 possible sky positions to use as objects from a possible 352. plFiberPlate : 11 possible sky positions to use as objects from a possible 351. plFiberPlate : 29 possible sky positions to use as objects from a possible 350. plFiberPlate : 21 possible sky positions to use as objects from a possible 349. plFiberPlate : 16 possible sky positions to use as objects from a possible 348. plFiberPlate : 12 possible sky positions to use as objects from a possible 347. plFiberPlate : 5 possible sky positions to use as objects from a possible 346. plFiberPlate : 15 possible sky positions to use as objects from a possible 345. plFiberPlate : 3 possible sky positions to use as objects from a possible 344. plFiberPlate : 7 possible sky positions to use as objects from a possible 343. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1966.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1967.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1967.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.09.3/plPlugMapP-1968.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 120 to list of science objects plFiberPlate : adding sky number 242 to list of science objects plFiberPlate : adding sky number 168 to list of science objects plFiberPlate : adding sky number 340 to list of science objects plFiberPlate : adding sky number 229 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 236 to list of science objects plFiberPlate : adding sky number 17 to list of science objects plFiberPlate : adding sky number 193 to list of science objects plFiberPlate : adding sky number 411 to list of science objects plFiberPlate : adding sky number 410 to list of science objects plFiberPlate : adding sky number 317 to list of science objects plFiberPlate : adding sky number 124 to list of science objects plFiberPlate : adding sky number 323 to list of science objects plFiberPlate : adding sky number 279 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 77 2 9 53 3 18 63 4 31 97 5 22 102 6 14 68 7 12 54 8 19 80 9 20 84 10 32 120 11 17 75 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 39 106 plFiberPlate : adding spectro-photo std with objId = 1056 1 6 31 159 plFiberPlate : adding spectro-photo std with objId = 1033 1 4 77 6 plFiberPlate : adding spectro-photo std with objId = 1033 1 5 86 116 plFiberPlate : adding spectro-photo std with objId = 1056 1 3 31 64 plFiberPlate : adding spectro-photo std with objId = 1056 1 2 34 130 plFiberPlate : adding spectro-photo std with objId = 1033 1 3 83 88 plFiberPlate : adding spectro-photo std with objId = 1056 1 1 39 131 plFiberPlate : 106 possible sky positions to use as objects from a possible 435. plFiberPlate : 45 possible sky positions to use as objects from a possible 434. plFiberPlate : 24 possible sky positions to use as objects from a possible 433. plFiberPlate : 22 possible sky positions to use as objects from a possible 432. plFiberPlate : 23 possible sky positions to use as objects from a possible 431. plFiberPlate : 8 possible sky positions to use as objects from a possible 430. plFiberPlate : 25 possible sky positions to use as objects from a possible 429. plFiberPlate : 66 possible sky positions to use as objects from a possible 428. plFiberPlate : 35 possible sky positions to use as objects from a possible 427. plFiberPlate : 18 possible sky positions to use as objects from a possible 426. plFiberPlate : 10 possible sky positions to use as objects from a possible 425. plFiberPlate : 2 possible sky positions to use as objects from a possible 424. plFiberPlate : 11 possible sky positions to use as objects from a possible 423. plFiberPlate : 3 possible sky positions to use as objects from a possible 422. plFiberPlate : 13 possible sky positions to use as objects from a possible 421. plFiberPlate : 11 possible sky positions to use as objects from a possible 420. plFiberPlate : 71 possible sky positions to use as objects from a possible 419. plFiberPlate : 61 possible sky positions to use as objects from a possible 418. plFiberPlate : 35 possible sky positions to use as objects from a possible 417. plFiberPlate : 12 possible sky positions to use as objects from a possible 416. plFiberPlate : 12 possible sky positions to use as objects from a possible 415. plFiberPlate : 16 possible sky positions to use as objects from a possible 414. plFiberPlate : 16 possible sky positions to use as objects from a possible 413. plFiberPlate : 7 possible sky positions to use as objects from a possible 412. plFiberPlate : 8 possible sky positions to use as objects from a possible 411. plFiberPlate : 31 possible sky positions to use as objects from a possible 410. plFiberPlate : 28 possible sky positions to use as objects from a possible 409. plFiberPlate : 23 possible sky positions to use as objects from a possible 408. plFiberPlate : 15 possible sky positions to use as objects from a possible 407. plFiberPlate : 17 possible sky positions to use as objects from a possible 406. plFiberPlate : 10 possible sky positions to use as objects from a possible 405. plFiberPlate : 8 possible sky positions to use as objects from a possible 404. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1967.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1968.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.09.3/plOverlay-1968.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Sep 15 10:36:41 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 5 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1964.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1964.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1964.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1965.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1965.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1965.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1966.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1966.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.7459,10.4931) and (-12.23,-2.95) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1966.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1967.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1967.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1967.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1968.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.1985,3.1353) and (12.62,1.81) plMakeFanucCodes : fixed path between (6.9749,10.7270) and (6.19,11.14) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1968.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.09.3/plFanuc-1968.par plMakeFanucCodes : temperature difference 13.8 deg C plMakeFanucCodes : using a temp expansion factor of 0.00029311 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Sep 15 10:36:55 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8c45a44 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 5 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1964 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 6.2 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1965 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 6.2 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1966 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 6.2 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1967 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 6.2 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 1968 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 6.2 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Sep 15 10:37:00 CDT 2004 Begin running "plateEnder dr2004.09.3 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_66/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_66/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.09.3 -morePipes 1" failed. PS: Read file for stderr output of this job.