Sender: LSF System Subject: Job 26551: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Oct 22 19:24:09 2004 Results reported at Fri Oct 22 19:27:45 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v16_101 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.10.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 186.90 sec. Max Memory : 12 MB Max Swap : 24 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Fri Oct 22 19:24:15 CDT 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Oct 22 19:24:25 CDT 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/unity/v2_6/Linux/lib/unity/bin:/sdss/ups/prd/sdsscp/v1_43/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_3/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/iraf/v2_12_1/Linux/bin:/sdss/ups/prd/sm/v2_4_27/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/ds9/v3_0b5/Linux/bin:/sdss/ups/prd/astrom/v3_8a/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v16_101/NULL/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Fri Oct 22 19:24:25 CDT 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v16_101/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0b5/Linux DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_3/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html IRAF_DIR=/sdss/ups/prd/iraf/v2_12_1/Linux KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_43/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UNITY_DIR=/sdss/ups/prd/unity/v2_6/Linux UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_jZjJsg --------------------------------------------------------------- --------------------------------------------------------------- Fri Oct 22 19:24:25 CDT 2004 Begin running plate --------------------------------------------------------------- Fri Oct 22 19:24:26 CDT 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8c4e7a4 makePlates : beginning loop over plObs chain; makePlates : making 20 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8024.par makePlates : plateInfo struct for plate 2058 : (h4).mjd 53341 (h4).raCen 10.513 (h4).decCen 24.898 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 10.513 24.898 10.513 26.398 plMakePlateFromTile : mjd of obs : 53341.466985 Observed HA/dec of plate center, fiducial point (deg) : -25.002 24.930 -25.002 26.430 The rotation angle of the fid. point is 64.464600 plMakePlateFromTile : beginning loop over 1627 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8025.par makePlates : plateInfo struct for plate 2059 : (h4).mjd 53341 (h4).raCen 18.7 (h4).decCen -9.721 (h4).haCen -18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 18.700 -9.721 18.700 -8.221 plMakePlateFromTile : mjd of obs : 53341.509053 Observed HA/dec of plate center, fiducial point (deg) : -18.002 -9.679 -18.003 -8.180 The rotation angle of the fid. point is 21.263984 plMakePlateFromTile : beginning loop over 1522 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8026.par makePlates : plateInfo struct for plate 2060 : (h4).mjd 53341 (h4).raCen 19.14 (h4).decCen 25.737 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 19.140 25.737 19.140 27.237 plMakePlateFromTile : mjd of obs : 53341.507517 Observed HA/dec of plate center, fiducial point (deg) : -19.002 25.768 -19.003 27.267 The rotation angle of the fid. point is 62.592222 plMakePlateFromTile : beginning loop over 1623 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8027.par makePlates : plateInfo struct for plate 2061 : (h4).mjd 53341 (h4).raCen 19.9956 (h4).decCen 31.6903 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 19.996 31.690 19.996 33.190 plMakePlateFromTile : mjd of obs : 53341.551456 Observed HA/dec of plate center, fiducial point (deg) : -4.002 31.719 -4.003 33.219 The rotation angle of the fid. point is 71.551407 plMakePlateFromTile : beginning loop over 1684 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8028.par makePlates : plateInfo struct for plate 2062 : (h4).mjd 53341 (h4).raCen 21.146 (h4).decCen 38.627 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.146 38.627 21.146 40.127 plMakePlateFromTile : mjd of obs : 53341.549106 Observed HA/dec of plate center, fiducial point (deg) : -6.002 38.654 -6.003 40.154 The rotation angle of the fid. point is 138.538066 plMakePlateFromTile : beginning loop over 1692 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8029.par makePlates : plateInfo struct for plate 2063 : (h4).mjd 53341 (h4).raCen 21.328 (h4).decCen 39.617 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 21.328 39.617 21.328 41.117 plMakePlateFromTile : mjd of obs : 53341.588407 Observed HA/dec of plate center, fiducial point (deg) : 7.998 39.644 7.997 41.143 The rotation angle of the fid. point is -134.321039 plMakePlateFromTile : beginning loop over 1707 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8030.par makePlates : plateInfo struct for plate 2064 : (h4).mjd 53341 (h4).raCen 24.72322 (h4).decCen 23.699 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 24.723 23.699 24.723 25.199 plMakePlateFromTile : mjd of obs : 53341.589490 Observed HA/dec of plate center, fiducial point (deg) : 4.998 23.729 4.997 25.229 The rotation angle of the fid. point is -24.775849 plMakePlateFromTile : beginning loop over 1596 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8031.par makePlates : plateInfo struct for plate 2065 : (h4).mjd 53341 (h4).raCen 30 (h4).decCen 0 (h4).haCen 15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 30.000 0.000 30.000 1.500 plMakePlateFromTile : mjd of obs : 53341.631808 Observed HA/dec of plate center, fiducial point (deg) : 14.998 0.036 14.997 1.535 The rotation angle of the fid. point is -21.903169 plMakePlateFromTile : beginning loop over 1546 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8032.par makePlates : plateInfo struct for plate 2066 : (h4).mjd 53341 (h4).raCen 32.2264 (h4).decCen 22.521 (h4).haCen 12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 32.226 22.521 32.226 24.021 plMakePlateFromTile : mjd of obs : 53341.629677 Observed HA/dec of plate center, fiducial point (deg) : 11.998 22.550 11.997 24.049 The rotation angle of the fid. point is -43.410356 plMakePlateFromTile : beginning loop over 1565 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8033.par makePlates : plateInfo struct for plate 2067 : (h4).mjd 53341 (h4).raCen 37.3955 (h4).decCen -8.4683 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 37.395 -8.468 37.395 -6.968 plMakePlateFromTile : mjd of obs : 53341.671691 Observed HA/dec of plate center, fiducial point (deg) : 21.998 -8.430 21.998 -6.931 The rotation angle of the fid. point is -25.849500 plMakePlateFromTile : beginning loop over 1530 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8034.par makePlates : plateInfo struct for plate 2068 : (h4).mjd 53341 (h4).raCen 47 (h4).decCen 0 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 47.000 0.000 47.000 1.500 plMakePlateFromTile : mjd of obs : 53341.673362 Observed HA/dec of plate center, fiducial point (deg) : 12.998 0.031 12.997 1.531 The rotation angle of the fid. point is -19.251750 plMakePlateFromTile : beginning loop over 1568 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8035.par makePlates : plateInfo struct for plate 2069 : (h4).mjd 53341 (h4).raCen 53 (h4).decCen 0 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 53.000 0.000 53.000 1.500 plMakePlateFromTile : mjd of obs : 53341.714923 Observed HA/dec of plate center, fiducial point (deg) : 21.998 0.030 21.997 1.529 The rotation angle of the fid. point is -30.188564 plMakePlateFromTile : beginning loop over 1542 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8036.par makePlates : plateInfo struct for plate 2070 : (h4).mjd 53341 (h4).raCen 55.4313 (h4).decCen -6.4086 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 55.431 -6.409 55.431 -4.909 plMakePlateFromTile : mjd of obs : 53341.713341 Observed HA/dec of plate center, fiducial point (deg) : 18.998 -6.377 18.997 -4.878 The rotation angle of the fid. point is -23.589073 plMakePlateFromTile : beginning loop over 1549 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8037.par makePlates : plateInfo struct for plate 2071 : (h4).mjd 53341 (h4).raCen 59.4161 (h4).decCen -5.8582 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 59.416 -5.858 59.416 -4.358 plMakePlateFromTile : mjd of obs : 53341.754864 Observed HA/dec of plate center, fiducial point (deg) : 29.998 -5.827 29.997 -4.328 The rotation angle of the fid. point is -34.448690 plMakePlateFromTile : beginning loop over 1596 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8038.par makePlates : plateInfo struct for plate 2072 : (h4).mjd 53341 (h4).raCen 83.2 (h4).decCen 0 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 83.200 0.000 83.200 1.500 plMakePlateFromTile : mjd of obs : 53341.795813 Observed HA/dec of plate center, fiducial point (deg) : 20.998 0.018 20.997 1.517 The rotation angle of the fid. point is -29.082800 plMakePlateFromTile : beginning loop over 2017 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8039.par makePlates : plateInfo struct for plate 2073 : (h4).mjd 53341 (h4).raCen 112.5084 (h4).decCen 35.9911 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 112.508 35.991 112.508 37.491 plMakePlateFromTile : mjd of obs : 53341.799463 Observed HA/dec of plate center, fiducial point (deg) : -7.002 35.980 -7.003 37.480 The rotation angle of the fid. point is 116.999312 plMakePlateFromTile : beginning loop over 1762 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8040.par makePlates : plateInfo struct for plate 2074 : (h4).mjd 53341 (h4).raCen 115.9969 (h4).decCen 18.17696 (h4).haCen 4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 115.997 18.177 115.997 19.677 plMakePlateFromTile : mjd of obs : 53341.839577 Observed HA/dec of plate center, fiducial point (deg) : 3.998 18.171 3.997 19.671 The rotation angle of the fid. point is -13.023568 plMakePlateFromTile : beginning loop over 1787 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8041.par makePlates : plateInfo struct for plate 2075 : (h4).mjd 53341 (h4).raCen 116.88 (h4).decCen 28.024 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 116.880 28.024 116.880 29.524 plMakePlateFromTile : mjd of obs : 53341.839267 Observed HA/dec of plate center, fiducial point (deg) : 2.998 28.014 2.997 29.514 The rotation angle of the fid. point is -27.704375 plMakePlateFromTile : beginning loop over 1743 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8042.par makePlates : plateInfo struct for plate 2076 : (h4).mjd 53341 (h4).raCen 121.2047 (h4).decCen 6.7479 (h4).haCen 13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.205 6.748 121.205 8.248 plMakePlateFromTile : mjd of obs : 53341.878926 Observed HA/dec of plate center, fiducial point (deg) : 12.998 6.745 12.997 8.244 The rotation angle of the fid. point is -23.164836 plMakePlateFromTile : beginning loop over 1642 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapT-8043.par makePlates : plateInfo struct for plate 2077 : (h4).mjd 53341 (h4).raCen 124 (h4).decCen 0 (h4).haCen 26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.000 0.000 124.000 1.500 plMakePlateFromTile : mjd of obs : 53341.922687 Observed HA/dec of plate center, fiducial point (deg) : 25.998 -0.000 25.997 1.499 The rotation angle of the fid. point is -34.225132 plMakePlateFromTile : beginning loop over 1719 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Oct 22 19:25:06 CDT 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 20 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2058.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 707 to list of science objects plFiberPlate : adding sky number 331 to list of science objects plFiberPlate : adding sky number 657 to list of science objects plFiberPlate : adding sky number 669 to list of science objects plFiberPlate : adding sky number 763 to list of science objects plFiberPlate : adding sky number 165 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 641 to list of science objects plFiberPlate : adding sky number 231 to list of science objects plFiberPlate : adding sky number 461 to list of science objects plFiberPlate : adding sky number 397 to list of science objects plFiberPlate : adding sky number 522 to list of science objects plFiberPlate : adding sky number 302 to list of science objects plFiberPlate : adding sky number 425 to list of science objects plFiberPlate : adding sky number 788 to list of science objects plFiberPlate : adding sky number 757 to list of science objects plFiberPlate : adding sky number 525 to list of science objects plFiberPlate : adding sky number 591 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 499 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 199 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 658 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 327 to list of science objects plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 813 to list of science objects plFiberPlate : adding sky number 177 to list of science objects plFiberPlate : adding sky number 416 to list of science objects plFiberPlate : adding sky number 680 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 166 2 21 107 3 14 106 4 18 152 5 20 181 6 13 118 7 12 106 8 13 154 9 24 173 10 37 210 11 26 153 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 433 35 plFiberPlate : adding spectro-photo std with objId = 4836 40 3 432 73 plFiberPlate : adding spectro-photo std with objId = 4836 40 2 432 74 plFiberPlate : adding spectro-photo std with objId = 4836 40 1 430 14 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 426 36 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 425 104 plFiberPlate : adding spectro-photo std with objId = 4836 40 6 423 128 plFiberPlate : adding spectro-photo std with objId = 4836 40 5 422 42 plFiberPlate : 165 possible sky positions to use as objects from a possible 809. plFiberPlate : 140 possible sky positions to use as objects from a possible 808. plFiberPlate : 98 possible sky positions to use as objects from a possible 807. plFiberPlate : 67 possible sky positions to use as objects from a possible 806. plFiberPlate : 48 possible sky positions to use as objects from a possible 805. plFiberPlate : 42 possible sky positions to use as objects from a possible 804. plFiberPlate : 61 possible sky positions to use as objects from a possible 803. plFiberPlate : 90 possible sky positions to use as objects from a possible 802. plFiberPlate : 77 possible sky positions to use as objects from a possible 801. plFiberPlate : 66 possible sky positions to use as objects from a possible 800. plFiberPlate : 33 possible sky positions to use as objects from a possible 799. plFiberPlate : 14 possible sky positions to use as objects from a possible 798. plFiberPlate : 16 possible sky positions to use as objects from a possible 797. plFiberPlate : 14 possible sky positions to use as objects from a possible 796. plFiberPlate : 33 possible sky positions to use as objects from a possible 795. plFiberPlate : 24 possible sky positions to use as objects from a possible 794. plFiberPlate : 128 possible sky positions to use as objects from a possible 793. plFiberPlate : 97 possible sky positions to use as objects from a possible 792. plFiberPlate : 73 possible sky positions to use as objects from a possible 791. plFiberPlate : 49 possible sky positions to use as objects from a possible 790. plFiberPlate : 23 possible sky positions to use as objects from a possible 789. plFiberPlate : 35 possible sky positions to use as objects from a possible 788. plFiberPlate : 39 possible sky positions to use as objects from a possible 787. plFiberPlate : 22 possible sky positions to use as objects from a possible 786. plFiberPlate : 20 possible sky positions to use as objects from a possible 785. plFiberPlate : 42 possible sky positions to use as objects from a possible 784. plFiberPlate : 51 possible sky positions to use as objects from a possible 783. plFiberPlate : 22 possible sky positions to use as objects from a possible 782. plFiberPlate : 20 possible sky positions to use as objects from a possible 781. plFiberPlate : 15 possible sky positions to use as objects from a possible 780. plFiberPlate : 17 possible sky positions to use as objects from a possible 779. plFiberPlate : 16 possible sky positions to use as objects from a possible 778. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 749 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2058.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2058.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2059.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 548 to list of science objects plFiberPlate : adding sky number 450 to list of science objects plFiberPlate : adding sky number 423 to list of science objects plFiberPlate : adding sky number 834 to list of science objects plFiberPlate : adding sky number 250 to list of science objects plFiberPlate : adding sky number 660 to list of science objects plFiberPlate : adding sky number 450 to list of science objects plFiberPlate : adding sky number 657 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 759 to list of science objects plFiberPlate : adding sky number 241 to list of science objects plFiberPlate : adding sky number 299 to list of science objects plFiberPlate : adding sky number 685 to list of science objects plFiberPlate : adding sky number 779 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 803 to list of science objects plFiberPlate : adding sky number 444 to list of science objects plFiberPlate : adding sky number 72 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 558 to list of science objects plFiberPlate : adding sky number 748 to list of science objects plFiberPlate : adding sky number 293 to list of science objects plFiberPlate : adding sky number 53 to list of science objects plFiberPlate : adding sky number 16 to list of science objects plFiberPlate : adding sky number 383 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 809 to list of science objects plFiberPlate : adding sky number 751 to list of science objects plFiberPlate : adding sky number 707 to list of science objects plFiberPlate : adding sky number 221 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 168 2 3 122 3 6 117 4 9 156 5 13 178 6 8 119 7 3 114 8 5 161 9 5 167 10 12 235 11 6 176 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1740 40 6 141 61 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 211 35 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 209 4 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 206 14 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 205 36 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 204 5 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 199 11 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 198 19 plFiberPlate : 171 possible sky positions to use as objects from a possible 830. plFiberPlate : 139 possible sky positions to use as objects from a possible 829. plFiberPlate : 86 possible sky positions to use as objects from a possible 828. plFiberPlate : 48 possible sky positions to use as objects from a possible 827. plFiberPlate : 48 possible sky positions to use as objects from a possible 826. plFiberPlate : 65 possible sky positions to use as objects from a possible 825. plFiberPlate : 44 possible sky positions to use as objects from a possible 824. plFiberPlate : 123 possible sky positions to use as objects from a possible 823. plFiberPlate : 85 possible sky positions to use as objects from a possible 822. plFiberPlate : 66 possible sky positions to use as objects from a possible 821. plFiberPlate : 34 possible sky positions to use as objects from a possible 820. plFiberPlate : 21 possible sky positions to use as objects from a possible 819. plFiberPlate : 18 possible sky positions to use as objects from a possible 818. plFiberPlate : 27 possible sky positions to use as objects from a possible 817. plFiberPlate : 29 possible sky positions to use as objects from a possible 816. plFiberPlate : 19 possible sky positions to use as objects from a possible 815. plFiberPlate : 99 possible sky positions to use as objects from a possible 814. plFiberPlate : 78 possible sky positions to use as objects from a possible 813. plFiberPlate : 64 possible sky positions to use as objects from a possible 812. plFiberPlate : 30 possible sky positions to use as objects from a possible 811. plFiberPlate : 30 possible sky positions to use as objects from a possible 810. plFiberPlate : 20 possible sky positions to use as objects from a possible 809. plFiberPlate : 28 possible sky positions to use as objects from a possible 808. plFiberPlate : 18 possible sky positions to use as objects from a possible 807. plFiberPlate : 16 possible sky positions to use as objects from a possible 806. plFiberPlate : 65 possible sky positions to use as objects from a possible 805. plFiberPlate : 49 possible sky positions to use as objects from a possible 804. plFiberPlate : 30 possible sky positions to use as objects from a possible 803. plFiberPlate : 20 possible sky positions to use as objects from a possible 802. plFiberPlate : 24 possible sky positions to use as objects from a possible 801. plFiberPlate : 22 possible sky positions to use as objects from a possible 800. plFiberPlate : 25 possible sky positions to use as objects from a possible 799. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 693 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2058.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2059.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2059.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2060.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 451 to list of science objects plFiberPlate : adding sky number 313 to list of science objects plFiberPlate : adding sky number 634 to list of science objects plFiberPlate : adding sky number 426 to list of science objects plFiberPlate : adding sky number 555 to list of science objects plFiberPlate : adding sky number 441 to list of science objects plFiberPlate : adding sky number 32 to list of science objects plFiberPlate : adding sky number 362 to list of science objects plFiberPlate : adding sky number 771 to list of science objects plFiberPlate : adding sky number 769 to list of science objects plFiberPlate : adding sky number 595 to list of science objects plFiberPlate : adding sky number 234 to list of science objects plFiberPlate : adding sky number 608 to list of science objects plFiberPlate : adding sky number 526 to list of science objects plFiberPlate : adding sky number 291 to list of science objects plFiberPlate : adding sky number 564 to list of science objects plFiberPlate : adding sky number 136 to list of science objects plFiberPlate : adding sky number 360 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 677 to list of science objects plFiberPlate : adding sky number 269 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 727 to list of science objects plFiberPlate : adding sky number 284 to list of science objects plFiberPlate : adding sky number 557 to list of science objects plFiberPlate : adding sky number 775 to list of science objects plFiberPlate : adding sky number 476 to list of science objects plFiberPlate : adding sky number 531 to list of science objects plFiberPlate : adding sky number 693 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 744 to list of science objects plFiberPlate : adding sky number 320 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 36 154 2 21 130 3 6 134 4 13 139 5 12 157 6 12 130 7 17 131 8 27 142 9 18 174 10 31 232 11 31 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 121 96 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 117 10 plFiberPlate : adding spectro-photo std with objId = 4829 40 2 114 86 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 113 52 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 109 91 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 108 158 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 104 123 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 103 96 plFiberPlate : 176 possible sky positions to use as objects from a possible 804. plFiberPlate : 119 possible sky positions to use as objects from a possible 803. plFiberPlate : 82 possible sky positions to use as objects from a possible 802. plFiberPlate : 54 possible sky positions to use as objects from a possible 801. plFiberPlate : 57 possible sky positions to use as objects from a possible 800. plFiberPlate : 51 possible sky positions to use as objects from a possible 799. plFiberPlate : 46 possible sky positions to use as objects from a possible 798. plFiberPlate : 107 possible sky positions to use as objects from a possible 797. plFiberPlate : 81 possible sky positions to use as objects from a possible 796. plFiberPlate : 67 possible sky positions to use as objects from a possible 795. plFiberPlate : 43 possible sky positions to use as objects from a possible 794. plFiberPlate : 24 possible sky positions to use as objects from a possible 793. plFiberPlate : 19 possible sky positions to use as objects from a possible 792. plFiberPlate : 27 possible sky positions to use as objects from a possible 791. plFiberPlate : 23 possible sky positions to use as objects from a possible 790. plFiberPlate : 28 possible sky positions to use as objects from a possible 789. plFiberPlate : 101 possible sky positions to use as objects from a possible 788. plFiberPlate : 71 possible sky positions to use as objects from a possible 787. plFiberPlate : 42 possible sky positions to use as objects from a possible 786. plFiberPlate : 29 possible sky positions to use as objects from a possible 785. plFiberPlate : 19 possible sky positions to use as objects from a possible 784. plFiberPlate : 13 possible sky positions to use as objects from a possible 783. plFiberPlate : 17 possible sky positions to use as objects from a possible 782. plFiberPlate : 19 possible sky positions to use as objects from a possible 781. plFiberPlate : 19 possible sky positions to use as objects from a possible 780. plFiberPlate : 60 possible sky positions to use as objects from a possible 779. plFiberPlate : 53 possible sky positions to use as objects from a possible 778. plFiberPlate : 41 possible sky positions to use as objects from a possible 777. plFiberPlate : 19 possible sky positions to use as objects from a possible 776. plFiberPlate : 16 possible sky positions to use as objects from a possible 775. plFiberPlate : 22 possible sky positions to use as objects from a possible 774. plFiberPlate : 26 possible sky positions to use as objects from a possible 773. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 745 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2059.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2060.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2060.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2061.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 661 to list of science objects plFiberPlate : adding sky number 554 to list of science objects plFiberPlate : adding sky number 737 to list of science objects plFiberPlate : adding sky number 390 to list of science objects plFiberPlate : adding sky number 174 to list of science objects plFiberPlate : adding sky number 766 to list of science objects plFiberPlate : adding sky number 741 to list of science objects plFiberPlate : adding sky number 118 to list of science objects plFiberPlate : adding sky number 708 to list of science objects plFiberPlate : adding sky number 514 to list of science objects plFiberPlate : adding sky number 346 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : adding sky number 628 to list of science objects plFiberPlate : adding sky number 245 to list of science objects plFiberPlate : adding sky number 356 to list of science objects plFiberPlate : adding sky number 179 to list of science objects plFiberPlate : adding sky number 149 to list of science objects plFiberPlate : adding sky number 219 to list of science objects plFiberPlate : adding sky number 441 to list of science objects plFiberPlate : adding sky number 329 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 716 to list of science objects plFiberPlate : adding sky number 81 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 597 to list of science objects plFiberPlate : adding sky number 773 to list of science objects plFiberPlate : adding sky number 733 to list of science objects plFiberPlate : adding sky number 535 to list of science objects plFiberPlate : adding sky number 299 to list of science objects plFiberPlate : adding sky number 585 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 30 161 2 22 138 3 14 128 4 16 137 5 17 137 6 16 119 7 24 125 8 34 136 9 25 168 10 38 228 11 33 164 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 158 49 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 157 262 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 153 253 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 153 78 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 148 131 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 148 177 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 144 204 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 144 124 plFiberPlate : 163 possible sky positions to use as objects from a possible 780. plFiberPlate : 110 possible sky positions to use as objects from a possible 779. plFiberPlate : 89 possible sky positions to use as objects from a possible 778. plFiberPlate : 78 possible sky positions to use as objects from a possible 777. plFiberPlate : 54 possible sky positions to use as objects from a possible 776. plFiberPlate : 39 possible sky positions to use as objects from a possible 775. plFiberPlate : 56 possible sky positions to use as objects from a possible 774. plFiberPlate : 97 possible sky positions to use as objects from a possible 773. plFiberPlate : 77 possible sky positions to use as objects from a possible 772. plFiberPlate : 49 possible sky positions to use as objects from a possible 771. plFiberPlate : 41 possible sky positions to use as objects from a possible 770. plFiberPlate : 21 possible sky positions to use as objects from a possible 769. plFiberPlate : 31 possible sky positions to use as objects from a possible 768. plFiberPlate : 24 possible sky positions to use as objects from a possible 767. plFiberPlate : 20 possible sky positions to use as objects from a possible 766. plFiberPlate : 25 possible sky positions to use as objects from a possible 765. plFiberPlate : 106 possible sky positions to use as objects from a possible 764. plFiberPlate : 62 possible sky positions to use as objects from a possible 763. plFiberPlate : 57 possible sky positions to use as objects from a possible 762. plFiberPlate : 33 possible sky positions to use as objects from a possible 761. plFiberPlate : 22 possible sky positions to use as objects from a possible 760. plFiberPlate : 25 possible sky positions to use as objects from a possible 759. plFiberPlate : 30 possible sky positions to use as objects from a possible 758. plFiberPlate : 19 possible sky positions to use as objects from a possible 757. plFiberPlate : 17 possible sky positions to use as objects from a possible 756. plFiberPlate : 57 possible sky positions to use as objects from a possible 755. plFiberPlate : 45 possible sky positions to use as objects from a possible 754. plFiberPlate : 35 possible sky positions to use as objects from a possible 753. plFiberPlate : 17 possible sky positions to use as objects from a possible 752. plFiberPlate : 16 possible sky positions to use as objects from a possible 751. plFiberPlate : 10 possible sky positions to use as objects from a possible 750. plFiberPlate : 22 possible sky positions to use as objects from a possible 749. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 776 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2060.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2061.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2061.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2062.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 254 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 160 to list of science objects plFiberPlate : adding sky number 402 to list of science objects plFiberPlate : adding sky number 167 to list of science objects plFiberPlate : adding sky number 104 to list of science objects plFiberPlate : adding sky number 501 to list of science objects plFiberPlate : adding sky number 85 to list of science objects plFiberPlate : adding sky number 541 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 507 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 645 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 353 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 537 to list of science objects plFiberPlate : adding sky number 493 to list of science objects plFiberPlate : adding sky number 441 to list of science objects plFiberPlate : adding sky number 649 to list of science objects plFiberPlate : adding sky number 428 to list of science objects plFiberPlate : adding sky number 508 to list of science objects plFiberPlate : adding sky number 62 to list of science objects plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : adding sky number 346 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 46 to list of science objects plFiberPlate : adding sky number 135 to list of science objects plFiberPlate : adding sky number 305 to list of science objects plFiberPlate : adding sky number 541 to list of science objects plFiberPlate : adding sky number 378 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 52 123 2 41 110 3 18 120 4 23 119 5 27 129 6 18 116 7 34 93 8 43 114 9 33 135 10 53 196 11 54 136 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 204 335 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 204 290 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 200 110 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 200 192 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 195 320 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 194 321 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 191 121 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 190 236 plFiberPlate : 155 possible sky positions to use as objects from a possible 659. plFiberPlate : 125 possible sky positions to use as objects from a possible 658. plFiberPlate : 56 possible sky positions to use as objects from a possible 657. plFiberPlate : 46 possible sky positions to use as objects from a possible 656. plFiberPlate : 31 possible sky positions to use as objects from a possible 655. plFiberPlate : 24 possible sky positions to use as objects from a possible 654. plFiberPlate : 52 possible sky positions to use as objects from a possible 653. plFiberPlate : 92 possible sky positions to use as objects from a possible 652. plFiberPlate : 76 possible sky positions to use as objects from a possible 651. plFiberPlate : 54 possible sky positions to use as objects from a possible 650. plFiberPlate : 39 possible sky positions to use as objects from a possible 649. plFiberPlate : 30 possible sky positions to use as objects from a possible 648. plFiberPlate : 28 possible sky positions to use as objects from a possible 647. plFiberPlate : 14 possible sky positions to use as objects from a possible 646. plFiberPlate : 32 possible sky positions to use as objects from a possible 645. plFiberPlate : 24 possible sky positions to use as objects from a possible 644. plFiberPlate : 71 possible sky positions to use as objects from a possible 643. plFiberPlate : 55 possible sky positions to use as objects from a possible 642. plFiberPlate : 37 possible sky positions to use as objects from a possible 641. plFiberPlate : 20 possible sky positions to use as objects from a possible 640. plFiberPlate : 6 possible sky positions to use as objects from a possible 639. plFiberPlate : 12 possible sky positions to use as objects from a possible 638. plFiberPlate : 11 possible sky positions to use as objects from a possible 637. plFiberPlate : 14 possible sky positions to use as objects from a possible 636. plFiberPlate : 26 possible sky positions to use as objects from a possible 635. plFiberPlate : 67 possible sky positions to use as objects from a possible 634. plFiberPlate : 46 possible sky positions to use as objects from a possible 633. plFiberPlate : 33 possible sky positions to use as objects from a possible 632. plFiberPlate : 23 possible sky positions to use as objects from a possible 631. plFiberPlate : 15 possible sky positions to use as objects from a possible 630. plFiberPlate : 17 possible sky positions to use as objects from a possible 629. plFiberPlate : 9 possible sky positions to use as objects from a possible 628. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 779 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2061.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2062.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2062.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2063.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 519 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 108 to list of science objects plFiberPlate : adding sky number 683 to list of science objects plFiberPlate : adding sky number 139 to list of science objects plFiberPlate : adding sky number 606 to list of science objects plFiberPlate : adding sky number 85 to list of science objects plFiberPlate : adding sky number 678 to list of science objects plFiberPlate : adding sky number 36 to list of science objects plFiberPlate : adding sky number 590 to list of science objects plFiberPlate : adding sky number 48 to list of science objects plFiberPlate : adding sky number 2 to list of science objects plFiberPlate : adding sky number 623 to list of science objects plFiberPlate : adding sky number 400 to list of science objects plFiberPlate : adding sky number 121 to list of science objects plFiberPlate : adding sky number 109 to list of science objects plFiberPlate : adding sky number 262 to list of science objects plFiberPlate : adding sky number 611 to list of science objects plFiberPlate : adding sky number 548 to list of science objects plFiberPlate : adding sky number 239 to list of science objects plFiberPlate : adding sky number 368 to list of science objects plFiberPlate : adding sky number 385 to list of science objects plFiberPlate : adding sky number 300 to list of science objects plFiberPlate : adding sky number 456 to list of science objects plFiberPlate : adding sky number 66 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 500 to list of science objects plFiberPlate : adding sky number 200 to list of science objects plFiberPlate : adding sky number 653 to list of science objects plFiberPlate : adding sky number 379 to list of science objects plFiberPlate : adding sky number 576 to list of science objects plFiberPlate : adding sky number 490 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 48 121 2 40 112 3 23 102 4 24 123 5 29 124 6 20 115 7 44 110 8 50 100 9 35 138 10 49 192 11 49 136 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 211 250 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 211 42 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 207 32 plFiberPlate : adding spectro-photo std with objId = 4829 40 5 206 319 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 201 183 plFiberPlate : adding spectro-photo std with objId = 4829 40 6 201 153 plFiberPlate : adding spectro-photo std with objId = 4829 40 3 198 91 plFiberPlate : adding spectro-photo std with objId = 4829 40 4 196 292 plFiberPlate : 159 possible sky positions to use as objects from a possible 655. plFiberPlate : 81 possible sky positions to use as objects from a possible 654. plFiberPlate : 64 possible sky positions to use as objects from a possible 653. plFiberPlate : 51 possible sky positions to use as objects from a possible 652. plFiberPlate : 27 possible sky positions to use as objects from a possible 651. plFiberPlate : 40 possible sky positions to use as objects from a possible 650. plFiberPlate : 49 possible sky positions to use as objects from a possible 649. plFiberPlate : 93 possible sky positions to use as objects from a possible 648. plFiberPlate : 68 possible sky positions to use as objects from a possible 647. plFiberPlate : 58 possible sky positions to use as objects from a possible 646. plFiberPlate : 36 possible sky positions to use as objects from a possible 645. plFiberPlate : 13 possible sky positions to use as objects from a possible 644. plFiberPlate : 30 possible sky positions to use as objects from a possible 643. plFiberPlate : 10 possible sky positions to use as objects from a possible 642. plFiberPlate : 20 possible sky positions to use as objects from a possible 641. plFiberPlate : 22 possible sky positions to use as objects from a possible 640. plFiberPlate : 60 possible sky positions to use as objects from a possible 639. plFiberPlate : 41 possible sky positions to use as objects from a possible 638. plFiberPlate : 36 possible sky positions to use as objects from a possible 637. plFiberPlate : 23 possible sky positions to use as objects from a possible 636. plFiberPlate : 19 possible sky positions to use as objects from a possible 635. plFiberPlate : 19 possible sky positions to use as objects from a possible 634. plFiberPlate : 19 possible sky positions to use as objects from a possible 633. plFiberPlate : 14 possible sky positions to use as objects from a possible 632. plFiberPlate : 9 possible sky positions to use as objects from a possible 631. plFiberPlate : 44 possible sky positions to use as objects from a possible 630. plFiberPlate : 44 possible sky positions to use as objects from a possible 629. plFiberPlate : 27 possible sky positions to use as objects from a possible 628. plFiberPlate : 29 possible sky positions to use as objects from a possible 627. plFiberPlate : 15 possible sky positions to use as objects from a possible 626. plFiberPlate : 14 possible sky positions to use as objects from a possible 625. plFiberPlate : 14 possible sky positions to use as objects from a possible 624. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 775 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2062.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2063.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2063.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2064.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 533 to list of science objects plFiberPlate : adding sky number 30 to list of science objects plFiberPlate : adding sky number 632 to list of science objects plFiberPlate : adding sky number 704 to list of science objects plFiberPlate : adding sky number 781 to list of science objects plFiberPlate : adding sky number 736 to list of science objects plFiberPlate : adding sky number 699 to list of science objects plFiberPlate : adding sky number 823 to list of science objects plFiberPlate : adding sky number 624 to list of science objects plFiberPlate : adding sky number 757 to list of science objects plFiberPlate : adding sky number 824 to list of science objects plFiberPlate : adding sky number 558 to list of science objects plFiberPlate : adding sky number 415 to list of science objects plFiberPlate : adding sky number 136 to list of science objects plFiberPlate : adding sky number 692 to list of science objects plFiberPlate : adding sky number 740 to list of science objects plFiberPlate : adding sky number 64 to list of science objects plFiberPlate : adding sky number 539 to list of science objects plFiberPlate : adding sky number 205 to list of science objects plFiberPlate : adding sky number 521 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 579 to list of science objects plFiberPlate : adding sky number 261 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 190 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 520 to list of science objects plFiberPlate : adding sky number 183 to list of science objects plFiberPlate : adding sky number 533 to list of science objects plFiberPlate : adding sky number 418 to list of science objects plFiberPlate : adding sky number 794 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 169 2 23 121 3 7 98 4 21 140 5 18 167 6 6 123 7 6 108 8 6 155 9 10 166 10 34 221 11 31 163 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4844 40 4 27 95 plFiberPlate : adding spectro-photo std with objId = 4843 40 5 104 48 plFiberPlate : adding spectro-photo std with objId = 4843 40 1 100 7 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 96 5 plFiberPlate : adding spectro-photo std with objId = 4843 40 6 94 136 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 92 32 plFiberPlate : adding spectro-photo std with objId = 4843 40 6 88 88 plFiberPlate : adding spectro-photo std with objId = 4843 40 3 86 55 plFiberPlate : 166 possible sky positions to use as objects from a possible 816. plFiberPlate : 102 possible sky positions to use as objects from a possible 815. plFiberPlate : 60 possible sky positions to use as objects from a possible 814. plFiberPlate : 46 possible sky positions to use as objects from a possible 813. plFiberPlate : 40 possible sky positions to use as objects from a possible 812. plFiberPlate : 51 possible sky positions to use as objects from a possible 811. plFiberPlate : 63 possible sky positions to use as objects from a possible 810. plFiberPlate : 113 possible sky positions to use as objects from a possible 809. plFiberPlate : 92 possible sky positions to use as objects from a possible 808. plFiberPlate : 65 possible sky positions to use as objects from a possible 807. plFiberPlate : 40 possible sky positions to use as objects from a possible 806. plFiberPlate : 33 possible sky positions to use as objects from a possible 805. plFiberPlate : 18 possible sky positions to use as objects from a possible 804. plFiberPlate : 21 possible sky positions to use as objects from a possible 803. plFiberPlate : 15 possible sky positions to use as objects from a possible 802. plFiberPlate : 36 possible sky positions to use as objects from a possible 801. plFiberPlate : 108 possible sky positions to use as objects from a possible 800. plFiberPlate : 85 possible sky positions to use as objects from a possible 799. plFiberPlate : 64 possible sky positions to use as objects from a possible 798. plFiberPlate : 56 possible sky positions to use as objects from a possible 797. plFiberPlate : 25 possible sky positions to use as objects from a possible 796. plFiberPlate : 30 possible sky positions to use as objects from a possible 795. plFiberPlate : 15 possible sky positions to use as objects from a possible 794. plFiberPlate : 17 possible sky positions to use as objects from a possible 793. plFiberPlate : 36 possible sky positions to use as objects from a possible 792. plFiberPlate : 58 possible sky positions to use as objects from a possible 791. plFiberPlate : 63 possible sky positions to use as objects from a possible 790. plFiberPlate : 31 possible sky positions to use as objects from a possible 789. plFiberPlate : 16 possible sky positions to use as objects from a possible 788. plFiberPlate : 17 possible sky positions to use as objects from a possible 787. plFiberPlate : 16 possible sky positions to use as objects from a possible 786. plFiberPlate : 27 possible sky positions to use as objects from a possible 785. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 732 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2063.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2064.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2064.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2065.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 481 to list of science objects plFiberPlate : adding sky number 633 to list of science objects plFiberPlate : adding sky number 99 to list of science objects plFiberPlate : adding sky number 414 to list of science objects plFiberPlate : adding sky number 520 to list of science objects plFiberPlate : adding sky number 828 to list of science objects plFiberPlate : adding sky number 395 to list of science objects plFiberPlate : adding sky number 294 to list of science objects plFiberPlate : adding sky number 740 to list of science objects plFiberPlate : adding sky number 379 to list of science objects plFiberPlate : adding sky number 2 to list of science objects plFiberPlate : adding sky number 300 to list of science objects plFiberPlate : adding sky number 520 to list of science objects plFiberPlate : adding sky number 724 to list of science objects plFiberPlate : adding sky number 203 to list of science objects plFiberPlate : adding sky number 585 to list of science objects plFiberPlate : adding sky number 418 to list of science objects plFiberPlate : adding sky number 416 to list of science objects plFiberPlate : adding sky number 263 to list of science objects plFiberPlate : adding sky number 614 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 535 to list of science objects plFiberPlate : adding sky number 35 to list of science objects plFiberPlate : adding sky number 355 to list of science objects plFiberPlate : adding sky number 597 to list of science objects plFiberPlate : adding sky number 577 to list of science objects plFiberPlate : adding sky number 545 to list of science objects plFiberPlate : adding sky number 296 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 519 to list of science objects plFiberPlate : adding sky number 534 to list of science objects plFiberPlate : adding sky number 621 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 188 2 8 124 3 9 110 4 6 161 5 3 184 6 5 115 7 4 108 8 2 165 9 4 174 10 15 232 11 12 166 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2738 40 6 114 20 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 304 70 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 304 6 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 303 76 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 303 46 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 302 140 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 301 37 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 299 38 plFiberPlate : 181 possible sky positions to use as objects from a possible 850. plFiberPlate : 127 possible sky positions to use as objects from a possible 849. plFiberPlate : 77 possible sky positions to use as objects from a possible 848. plFiberPlate : 53 possible sky positions to use as objects from a possible 847. plFiberPlate : 63 possible sky positions to use as objects from a possible 846. plFiberPlate : 53 possible sky positions to use as objects from a possible 845. plFiberPlate : 69 possible sky positions to use as objects from a possible 844. plFiberPlate : 113 possible sky positions to use as objects from a possible 843. plFiberPlate : 93 possible sky positions to use as objects from a possible 842. plFiberPlate : 63 possible sky positions to use as objects from a possible 841. plFiberPlate : 41 possible sky positions to use as objects from a possible 840. plFiberPlate : 29 possible sky positions to use as objects from a possible 839. plFiberPlate : 18 possible sky positions to use as objects from a possible 838. plFiberPlate : 24 possible sky positions to use as objects from a possible 837. plFiberPlate : 33 possible sky positions to use as objects from a possible 836. plFiberPlate : 25 possible sky positions to use as objects from a possible 835. plFiberPlate : 103 possible sky positions to use as objects from a possible 834. plFiberPlate : 72 possible sky positions to use as objects from a possible 833. plFiberPlate : 57 possible sky positions to use as objects from a possible 832. plFiberPlate : 36 possible sky positions to use as objects from a possible 831. plFiberPlate : 18 possible sky positions to use as objects from a possible 830. plFiberPlate : 20 possible sky positions to use as objects from a possible 829. plFiberPlate : 25 possible sky positions to use as objects from a possible 828. plFiberPlate : 24 possible sky positions to use as objects from a possible 827. plFiberPlate : 18 possible sky positions to use as objects from a possible 826. plFiberPlate : 83 possible sky positions to use as objects from a possible 825. plFiberPlate : 64 possible sky positions to use as objects from a possible 824. plFiberPlate : 47 possible sky positions to use as objects from a possible 823. plFiberPlate : 39 possible sky positions to use as objects from a possible 822. plFiberPlate : 17 possible sky positions to use as objects from a possible 821. plFiberPlate : 15 possible sky positions to use as objects from a possible 820. plFiberPlate : 19 possible sky positions to use as objects from a possible 819. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 697 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2064.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2065.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2065.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2066.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 274 to list of science objects plFiberPlate : adding sky number 618 to list of science objects plFiberPlate : adding sky number 168 to list of science objects plFiberPlate : adding sky number 767 to list of science objects plFiberPlate : adding sky number 569 to list of science objects plFiberPlate : adding sky number 542 to list of science objects plFiberPlate : adding sky number 213 to list of science objects plFiberPlate : adding sky number 441 to list of science objects plFiberPlate : adding sky number 72 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 724 to list of science objects plFiberPlate : adding sky number 566 to list of science objects plFiberPlate : adding sky number 77 to list of science objects plFiberPlate : adding sky number 91 to list of science objects plFiberPlate : adding sky number 297 to list of science objects plFiberPlate : adding sky number 473 to list of science objects plFiberPlate : adding sky number 486 to list of science objects plFiberPlate : adding sky number 545 to list of science objects plFiberPlate : adding sky number 236 to list of science objects plFiberPlate : adding sky number 633 to list of science objects plFiberPlate : adding sky number 235 to list of science objects plFiberPlate : adding sky number 268 to list of science objects plFiberPlate : adding sky number 154 to list of science objects plFiberPlate : adding sky number 800 to list of science objects plFiberPlate : adding sky number 2 to list of science objects plFiberPlate : adding sky number 671 to list of science objects plFiberPlate : adding sky number 268 to list of science objects plFiberPlate : adding sky number 152 to list of science objects plFiberPlate : adding sky number 352 to list of science objects plFiberPlate : adding sky number 773 to list of science objects plFiberPlate : adding sky number 740 to list of science objects plFiberPlate : adding sky number 615 to list of science objects plFiberPlate : adding sky number 562 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 550 to list of science objects plFiberPlate : adding sky number 307 to list of science objects plFiberPlate : adding sky number 619 to list of science objects plFiberPlate : adding sky number 753 to list of science objects plFiberPlate : adding sky number 731 to list of science objects plFiberPlate : adding sky number 686 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 630 to list of science objects plFiberPlate : adding sky number 435 to list of science objects plFiberPlate : adding sky number 235 to list of science objects plFiberPlate : adding sky number 716 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 690 to list of science objects plFiberPlate : adding sky number 393 to list of science objects plFiberPlate : adding sky number 454 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 215 to list of science objects plFiberPlate : adding sky number 678 to list of science objects plFiberPlate : adding sky number 386 to list of science objects plFiberPlate : adding sky number 363 to list of science objects plFiberPlate : adding sky number 663 to list of science objects plFiberPlate : adding sky number 387 to list of science objects plFiberPlate : adding sky number 227 to list of science objects plFiberPlate : adding sky number 140 to list of science objects plFiberPlate : adding sky number 532 to list of science objects plFiberPlate : adding sky number 565 to list of science objects plFiberPlate : adding sky number 107 to list of science objects plFiberPlate : adding sky number 467 to list of science objects plFiberPlate : adding sky number 381 to list of science objects plFiberPlate : adding sky number 647 to list of science objects plFiberPlate : adding sky number 559 to list of science objects plFiberPlate : adding sky number 137 to list of science objects plFiberPlate : adding sky number 170 to list of science objects plFiberPlate : adding sky number 383 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 167 2 22 115 3 11 100 4 21 137 5 11 148 6 7 108 7 9 111 8 6 153 9 10 152 10 36 204 11 33 152 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4843 40 1 144 82 plFiberPlate : adding spectro-photo std with objId = 4843 40 4 138 151 plFiberPlate : adding spectro-photo std with objId = 4843 40 1 138 54 plFiberPlate : adding spectro-photo std with objId = 4843 40 6 135 100 plFiberPlate : adding spectro-photo std with objId = 4843 40 6 135 98 plFiberPlate : adding spectro-photo std with objId = 4843 40 3 134 50 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 134 109 plFiberPlate : adding spectro-photo std with objId = 4843 40 2 133 35 plFiberPlate : 149 possible sky positions to use as objects from a possible 768. plFiberPlate : 99 possible sky positions to use as objects from a possible 767. plFiberPlate : 69 possible sky positions to use as objects from a possible 766. plFiberPlate : 38 possible sky positions to use as objects from a possible 765. plFiberPlate : 44 possible sky positions to use as objects from a possible 764. plFiberPlate : 56 possible sky positions to use as objects from a possible 763. plFiberPlate : 42 possible sky positions to use as objects from a possible 762. plFiberPlate : 89 possible sky positions to use as objects from a possible 761. plFiberPlate : 85 possible sky positions to use as objects from a possible 760. plFiberPlate : 69 possible sky positions to use as objects from a possible 759. plFiberPlate : 41 possible sky positions to use as objects from a possible 758. plFiberPlate : 26 possible sky positions to use as objects from a possible 757. plFiberPlate : 18 possible sky positions to use as objects from a possible 756. plFiberPlate : 28 possible sky positions to use as objects from a possible 755. plFiberPlate : 16 possible sky positions to use as objects from a possible 754. plFiberPlate : 31 possible sky positions to use as objects from a possible 753. plFiberPlate : 85 possible sky positions to use as objects from a possible 752. plFiberPlate : 76 possible sky positions to use as objects from a possible 751. plFiberPlate : 53 possible sky positions to use as objects from a possible 750. plFiberPlate : 34 possible sky positions to use as objects from a possible 749. plFiberPlate : 16 possible sky positions to use as objects from a possible 748. plFiberPlate : 18 possible sky positions to use as objects from a possible 747. plFiberPlate : 19 possible sky positions to use as objects from a possible 746. plFiberPlate : 17 possible sky positions to use as objects from a possible 745. plFiberPlate : 27 possible sky positions to use as objects from a possible 744. plFiberPlate : 54 possible sky positions to use as objects from a possible 743. plFiberPlate : 29 possible sky positions to use as objects from a possible 742. plFiberPlate : 40 possible sky positions to use as objects from a possible 741. plFiberPlate : 41 possible sky positions to use as objects from a possible 740. plFiberPlate : 21 possible sky positions to use as objects from a possible 739. plFiberPlate : 30 possible sky positions to use as objects from a possible 738. plFiberPlate : 19 possible sky positions to use as objects from a possible 737. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 730 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2065.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2066.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2066.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2067.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 119 to list of science objects plFiberPlate : adding sky number 311 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 804 to list of science objects plFiberPlate : adding sky number 783 to list of science objects plFiberPlate : adding sky number 535 to list of science objects plFiberPlate : adding sky number 719 to list of science objects plFiberPlate : adding sky number 702 to list of science objects plFiberPlate : adding sky number 425 to list of science objects plFiberPlate : adding sky number 287 to list of science objects plFiberPlate : adding sky number 337 to list of science objects plFiberPlate : adding sky number 563 to list of science objects plFiberPlate : adding sky number 519 to list of science objects plFiberPlate : adding sky number 220 to list of science objects plFiberPlate : adding sky number 128 to list of science objects plFiberPlate : adding sky number 61 to list of science objects plFiberPlate : adding sky number 91 to list of science objects plFiberPlate : adding sky number 549 to list of science objects plFiberPlate : adding sky number 308 to list of science objects plFiberPlate : adding sky number 244 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 77 to list of science objects plFiberPlate : adding sky number 360 to list of science objects plFiberPlate : adding sky number 787 to list of science objects plFiberPlate : adding sky number 491 to list of science objects plFiberPlate : adding sky number 223 to list of science objects plFiberPlate : adding sky number 553 to list of science objects plFiberPlate : adding sky number 639 to list of science objects plFiberPlate : adding sky number 408 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 738 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 185 2 5 121 3 8 118 4 6 160 5 7 178 6 5 117 7 6 116 8 9 169 9 6 167 10 12 232 11 8 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1045 40 2 17 45 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 335 14 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 331 6 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 328 30 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 327 7 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 326 45 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 325 133 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 322 33 plFiberPlate : 173 possible sky positions to use as objects from a possible 835. plFiberPlate : 144 possible sky positions to use as objects from a possible 834. plFiberPlate : 88 possible sky positions to use as objects from a possible 833. plFiberPlate : 46 possible sky positions to use as objects from a possible 832. plFiberPlate : 37 possible sky positions to use as objects from a possible 831. plFiberPlate : 55 possible sky positions to use as objects from a possible 830. plFiberPlate : 72 possible sky positions to use as objects from a possible 829. plFiberPlate : 108 possible sky positions to use as objects from a possible 828. plFiberPlate : 84 possible sky positions to use as objects from a possible 827. plFiberPlate : 73 possible sky positions to use as objects from a possible 826. plFiberPlate : 53 possible sky positions to use as objects from a possible 825. plFiberPlate : 31 possible sky positions to use as objects from a possible 824. plFiberPlate : 23 possible sky positions to use as objects from a possible 823. plFiberPlate : 36 possible sky positions to use as objects from a possible 822. plFiberPlate : 41 possible sky positions to use as objects from a possible 821. plFiberPlate : 23 possible sky positions to use as objects from a possible 820. plFiberPlate : 85 possible sky positions to use as objects from a possible 819. plFiberPlate : 84 possible sky positions to use as objects from a possible 818. plFiberPlate : 66 possible sky positions to use as objects from a possible 817. plFiberPlate : 39 possible sky positions to use as objects from a possible 816. plFiberPlate : 24 possible sky positions to use as objects from a possible 815. plFiberPlate : 18 possible sky positions to use as objects from a possible 814. plFiberPlate : 14 possible sky positions to use as objects from a possible 813. plFiberPlate : 32 possible sky positions to use as objects from a possible 812. plFiberPlate : 32 possible sky positions to use as objects from a possible 811. plFiberPlate : 63 possible sky positions to use as objects from a possible 810. plFiberPlate : 58 possible sky positions to use as objects from a possible 809. plFiberPlate : 48 possible sky positions to use as objects from a possible 808. plFiberPlate : 25 possible sky positions to use as objects from a possible 807. plFiberPlate : 19 possible sky positions to use as objects from a possible 806. plFiberPlate : 29 possible sky positions to use as objects from a possible 805. plFiberPlate : 17 possible sky positions to use as objects from a possible 804. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 695 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2066.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2067.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2067.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2068.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 546 to list of science objects plFiberPlate : adding sky number 451 to list of science objects plFiberPlate : adding sky number 181 to list of science objects plFiberPlate : adding sky number 485 to list of science objects plFiberPlate : adding sky number 370 to list of science objects plFiberPlate : adding sky number 720 to list of science objects plFiberPlate : adding sky number 341 to list of science objects plFiberPlate : adding sky number 211 to list of science objects plFiberPlate : adding sky number 282 to list of science objects plFiberPlate : adding sky number 630 to list of science objects plFiberPlate : adding sky number 551 to list of science objects plFiberPlate : adding sky number 848 to list of science objects plFiberPlate : adding sky number 291 to list of science objects plFiberPlate : adding sky number 771 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 352 to list of science objects plFiberPlate : adding sky number 4 to list of science objects plFiberPlate : adding sky number 670 to list of science objects plFiberPlate : adding sky number 662 to list of science objects plFiberPlate : adding sky number 250 to list of science objects plFiberPlate : adding sky number 97 to list of science objects plFiberPlate : adding sky number 737 to list of science objects plFiberPlate : adding sky number 613 to list of science objects plFiberPlate : adding sky number 41 to list of science objects plFiberPlate : adding sky number 381 to list of science objects plFiberPlate : adding sky number 836 to list of science objects plFiberPlate : adding sky number 599 to list of science objects plFiberPlate : adding sky number 178 to list of science objects plFiberPlate : adding sky number 400 to list of science objects plFiberPlate : adding sky number 730 to list of science objects plFiberPlate : adding sky number 79 to list of science objects plFiberPlate : adding sky number 83 to list of science objects plFiberPlate : adding sky number 322 to list of science objects plFiberPlate : adding sky number 253 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 179 2 8 122 3 10 123 4 14 174 5 9 183 6 6 121 7 8 118 8 11 158 9 10 172 10 17 237 11 11 166 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 427 87 plFiberPlate : adding spectro-photo std with objId = 3325 41 1 426 69 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 420 144 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 420 11 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 418 11 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 416 19 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 413 129 plFiberPlate : adding spectro-photo std with objId = 3325 41 4 413 99 plFiberPlate : 197 possible sky positions to use as objects from a possible 839. plFiberPlate : 117 possible sky positions to use as objects from a possible 838. plFiberPlate : 64 possible sky positions to use as objects from a possible 837. plFiberPlate : 46 possible sky positions to use as objects from a possible 836. plFiberPlate : 29 possible sky positions to use as objects from a possible 835. plFiberPlate : 34 possible sky positions to use as objects from a possible 834. plFiberPlate : 70 possible sky positions to use as objects from a possible 833. plFiberPlate : 118 possible sky positions to use as objects from a possible 832. plFiberPlate : 91 possible sky positions to use as objects from a possible 831. plFiberPlate : 84 possible sky positions to use as objects from a possible 830. plFiberPlate : 47 possible sky positions to use as objects from a possible 829. plFiberPlate : 30 possible sky positions to use as objects from a possible 828. plFiberPlate : 9 possible sky positions to use as objects from a possible 827. plFiberPlate : 18 possible sky positions to use as objects from a possible 826. plFiberPlate : 14 possible sky positions to use as objects from a possible 825. plFiberPlate : 42 possible sky positions to use as objects from a possible 824. plFiberPlate : 102 possible sky positions to use as objects from a possible 823. plFiberPlate : 87 possible sky positions to use as objects from a possible 822. plFiberPlate : 61 possible sky positions to use as objects from a possible 821. plFiberPlate : 33 possible sky positions to use as objects from a possible 820. plFiberPlate : 20 possible sky positions to use as objects from a possible 819. plFiberPlate : 22 possible sky positions to use as objects from a possible 818. plFiberPlate : 25 possible sky positions to use as objects from a possible 817. plFiberPlate : 17 possible sky positions to use as objects from a possible 816. plFiberPlate : 25 possible sky positions to use as objects from a possible 815. plFiberPlate : 71 possible sky positions to use as objects from a possible 814. plFiberPlate : 51 possible sky positions to use as objects from a possible 813. plFiberPlate : 35 possible sky positions to use as objects from a possible 812. plFiberPlate : 19 possible sky positions to use as objects from a possible 811. plFiberPlate : 24 possible sky positions to use as objects from a possible 810. plFiberPlate : 22 possible sky positions to use as objects from a possible 809. plFiberPlate : 26 possible sky positions to use as objects from a possible 808. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 703 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2067.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2068.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2068.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2069.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 548 to list of science objects plFiberPlate : adding sky number 673 to list of science objects plFiberPlate : adding sky number 109 to list of science objects plFiberPlate : adding sky number 42 to list of science objects plFiberPlate : adding sky number 44 to list of science objects plFiberPlate : adding sky number 379 to list of science objects plFiberPlate : adding sky number 646 to list of science objects plFiberPlate : adding sky number 572 to list of science objects plFiberPlate : adding sky number 365 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 485 to list of science objects plFiberPlate : adding sky number 476 to list of science objects plFiberPlate : adding sky number 435 to list of science objects plFiberPlate : adding sky number 488 to list of science objects plFiberPlate : adding sky number 296 to list of science objects plFiberPlate : adding sky number 249 to list of science objects plFiberPlate : adding sky number 726 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : adding sky number 427 to list of science objects plFiberPlate : adding sky number 503 to list of science objects plFiberPlate : adding sky number 484 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 672 to list of science objects plFiberPlate : adding sky number 56 to list of science objects plFiberPlate : adding sky number 79 to list of science objects plFiberPlate : adding sky number 745 to list of science objects plFiberPlate : adding sky number 136 to list of science objects plFiberPlate : adding sky number 387 to list of science objects plFiberPlate : adding sky number 181 to list of science objects plFiberPlate : adding sky number 663 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 167 2 18 120 3 18 107 4 21 149 5 8 174 6 9 117 7 9 112 8 3 140 9 10 168 10 31 224 11 27 169 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2738 40 1 266 44 plFiberPlate : adding spectro-photo std with objId = 3325 41 3 469 33 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 461 55 plFiberPlate : adding spectro-photo std with objId = 3325 41 6 460 21 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 460 88 plFiberPlate : adding spectro-photo std with objId = 3325 41 2 457 21 plFiberPlate : adding spectro-photo std with objId = 3325 41 5 456 43 plFiberPlate : adding spectro-photo std with objId = 3325 41 5 455 34 plFiberPlate : 163 possible sky positions to use as objects from a possible 802. plFiberPlate : 110 possible sky positions to use as objects from a possible 801. plFiberPlate : 75 possible sky positions to use as objects from a possible 800. plFiberPlate : 22 possible sky positions to use as objects from a possible 799. plFiberPlate : 57 possible sky positions to use as objects from a possible 798. plFiberPlate : 63 possible sky positions to use as objects from a possible 797. plFiberPlate : 46 possible sky positions to use as objects from a possible 796. plFiberPlate : 97 possible sky positions to use as objects from a possible 795. plFiberPlate : 97 possible sky positions to use as objects from a possible 794. plFiberPlate : 60 possible sky positions to use as objects from a possible 793. plFiberPlate : 38 possible sky positions to use as objects from a possible 792. plFiberPlate : 21 possible sky positions to use as objects from a possible 791. plFiberPlate : 32 possible sky positions to use as objects from a possible 790. plFiberPlate : 23 possible sky positions to use as objects from a possible 789. plFiberPlate : 17 possible sky positions to use as objects from a possible 788. plFiberPlate : 34 possible sky positions to use as objects from a possible 787. plFiberPlate : 66 possible sky positions to use as objects from a possible 786. plFiberPlate : 54 possible sky positions to use as objects from a possible 785. plFiberPlate : 63 possible sky positions to use as objects from a possible 784. plFiberPlate : 41 possible sky positions to use as objects from a possible 783. plFiberPlate : 27 possible sky positions to use as objects from a possible 782. plFiberPlate : 34 possible sky positions to use as objects from a possible 781. plFiberPlate : 16 possible sky positions to use as objects from a possible 780. plFiberPlate : 20 possible sky positions to use as objects from a possible 779. plFiberPlate : 26 possible sky positions to use as objects from a possible 778. plFiberPlate : 77 possible sky positions to use as objects from a possible 777. plFiberPlate : 46 possible sky positions to use as objects from a possible 776. plFiberPlate : 23 possible sky positions to use as objects from a possible 775. plFiberPlate : 24 possible sky positions to use as objects from a possible 774. plFiberPlate : 14 possible sky positions to use as objects from a possible 773. plFiberPlate : 15 possible sky positions to use as objects from a possible 772. plFiberPlate : 18 possible sky positions to use as objects from a possible 771. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 692 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2068.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2069.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2069.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2070.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 241 to list of science objects plFiberPlate : adding sky number 296 to list of science objects plFiberPlate : adding sky number 728 to list of science objects plFiberPlate : adding sky number 285 to list of science objects plFiberPlate : adding sky number 673 to list of science objects plFiberPlate : adding sky number 544 to list of science objects plFiberPlate : adding sky number 29 to list of science objects plFiberPlate : adding sky number 212 to list of science objects plFiberPlate : adding sky number 640 to list of science objects plFiberPlate : adding sky number 514 to list of science objects plFiberPlate : adding sky number 686 to list of science objects plFiberPlate : adding sky number 252 to list of science objects plFiberPlate : adding sky number 181 to list of science objects plFiberPlate : adding sky number 161 to list of science objects plFiberPlate : adding sky number 500 to list of science objects plFiberPlate : adding sky number 89 to list of science objects plFiberPlate : adding sky number 549 to list of science objects plFiberPlate : adding sky number 636 to list of science objects plFiberPlate : adding sky number 584 to list of science objects plFiberPlate : adding sky number 162 to list of science objects plFiberPlate : adding sky number 325 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 311 to list of science objects plFiberPlate : adding sky number 429 to list of science objects plFiberPlate : adding sky number 124 to list of science objects plFiberPlate : adding sky number 446 to list of science objects plFiberPlate : adding sky number 11 to list of science objects plFiberPlate : adding sky number 304 to list of science objects plFiberPlate : adding sky number 306 to list of science objects plFiberPlate : adding sky number 244 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 173 2 12 110 3 11 113 4 17 150 5 13 163 6 8 120 7 11 114 8 21 145 9 12 170 10 23 218 11 16 167 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 449 24 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 448 90 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 444 68 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 443 64 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 443 70 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 443 124 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 442 29 plFiberPlate : adding spectro-photo std with objId = 1729 40 2 442 2 plFiberPlate : 173 possible sky positions to use as objects from a possible 799. plFiberPlate : 113 possible sky positions to use as objects from a possible 798. plFiberPlate : 66 possible sky positions to use as objects from a possible 797. plFiberPlate : 38 possible sky positions to use as objects from a possible 796. plFiberPlate : 28 possible sky positions to use as objects from a possible 795. plFiberPlate : 53 possible sky positions to use as objects from a possible 794. plFiberPlate : 45 possible sky positions to use as objects from a possible 793. plFiberPlate : 77 possible sky positions to use as objects from a possible 792. plFiberPlate : 80 possible sky positions to use as objects from a possible 791. plFiberPlate : 62 possible sky positions to use as objects from a possible 790. plFiberPlate : 35 possible sky positions to use as objects from a possible 789. plFiberPlate : 19 possible sky positions to use as objects from a possible 788. plFiberPlate : 23 possible sky positions to use as objects from a possible 787. plFiberPlate : 22 possible sky positions to use as objects from a possible 786. plFiberPlate : 20 possible sky positions to use as objects from a possible 785. plFiberPlate : 20 possible sky positions to use as objects from a possible 784. plFiberPlate : 69 possible sky positions to use as objects from a possible 783. plFiberPlate : 70 possible sky positions to use as objects from a possible 782. plFiberPlate : 37 possible sky positions to use as objects from a possible 781. plFiberPlate : 15 possible sky positions to use as objects from a possible 780. plFiberPlate : 21 possible sky positions to use as objects from a possible 779. plFiberPlate : 17 possible sky positions to use as objects from a possible 778. plFiberPlate : 14 possible sky positions to use as objects from a possible 777. plFiberPlate : 13 possible sky positions to use as objects from a possible 776. plFiberPlate : 20 possible sky positions to use as objects from a possible 775. plFiberPlate : 79 possible sky positions to use as objects from a possible 774. plFiberPlate : 54 possible sky positions to use as objects from a possible 773. plFiberPlate : 33 possible sky positions to use as objects from a possible 772. plFiberPlate : 16 possible sky positions to use as objects from a possible 771. plFiberPlate : 18 possible sky positions to use as objects from a possible 770. plFiberPlate : 15 possible sky positions to use as objects from a possible 769. plFiberPlate : 29 possible sky positions to use as objects from a possible 768. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 704 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2069.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2070.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2070.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2071.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 628 to list of science objects plFiberPlate : adding sky number 221 to list of science objects plFiberPlate : adding sky number 552 to list of science objects plFiberPlate : adding sky number 468 to list of science objects plFiberPlate : adding sky number 779 to list of science objects plFiberPlate : adding sky number 581 to list of science objects plFiberPlate : adding sky number 685 to list of science objects plFiberPlate : adding sky number 589 to list of science objects plFiberPlate : adding sky number 263 to list of science objects plFiberPlate : adding sky number 544 to list of science objects plFiberPlate : adding sky number 5 to list of science objects plFiberPlate : adding sky number 448 to list of science objects plFiberPlate : adding sky number 708 to list of science objects plFiberPlate : adding sky number 518 to list of science objects plFiberPlate : adding sky number 538 to list of science objects plFiberPlate : adding sky number 433 to list of science objects plFiberPlate : adding sky number 334 to list of science objects plFiberPlate : adding sky number 302 to list of science objects plFiberPlate : adding sky number 599 to list of science objects plFiberPlate : adding sky number 667 to list of science objects plFiberPlate : adding sky number 563 to list of science objects plFiberPlate : adding sky number 127 to list of science objects plFiberPlate : adding sky number 27 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 567 to list of science objects plFiberPlate : adding sky number 155 to list of science objects plFiberPlate : adding sky number 511 to list of science objects plFiberPlate : adding sky number 577 to list of science objects plFiberPlate : adding sky number 467 to list of science objects plFiberPlate : adding sky number 0 to list of science objects plFiberPlate : adding sky number 4 to list of science objects plFiberPlate : adding sky number 250 to list of science objects plFiberPlate : adding sky number 214 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 170 2 14 109 3 12 112 4 16 148 5 17 173 6 16 116 7 20 121 8 17 152 9 23 165 10 26 225 11 18 163 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1729 40 4 475 20 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 474 57 plFiberPlate : adding spectro-photo std with objId = 1729 40 5 473 28 plFiberPlate : adding spectro-photo std with objId = 1729 40 1 473 73 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 471 2 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 469 116 plFiberPlate : adding spectro-photo std with objId = 1729 40 6 469 53 plFiberPlate : adding spectro-photo std with objId = 1729 40 3 467 71 plFiberPlate : 172 possible sky positions to use as objects from a possible 819. plFiberPlate : 125 possible sky positions to use as objects from a possible 818. plFiberPlate : 83 possible sky positions to use as objects from a possible 817. plFiberPlate : 44 possible sky positions to use as objects from a possible 816. plFiberPlate : 48 possible sky positions to use as objects from a possible 815. plFiberPlate : 43 possible sky positions to use as objects from a possible 814. plFiberPlate : 51 possible sky positions to use as objects from a possible 813. plFiberPlate : 91 possible sky positions to use as objects from a possible 812. plFiberPlate : 82 possible sky positions to use as objects from a possible 811. plFiberPlate : 58 possible sky positions to use as objects from a possible 810. plFiberPlate : 41 possible sky positions to use as objects from a possible 809. plFiberPlate : 16 possible sky positions to use as objects from a possible 808. plFiberPlate : 26 possible sky positions to use as objects from a possible 807. plFiberPlate : 23 possible sky positions to use as objects from a possible 806. plFiberPlate : 14 possible sky positions to use as objects from a possible 805. plFiberPlate : 28 possible sky positions to use as objects from a possible 804. plFiberPlate : 101 possible sky positions to use as objects from a possible 803. plFiberPlate : 91 possible sky positions to use as objects from a possible 802. plFiberPlate : 56 possible sky positions to use as objects from a possible 801. plFiberPlate : 39 possible sky positions to use as objects from a possible 800. plFiberPlate : 15 possible sky positions to use as objects from a possible 799. plFiberPlate : 28 possible sky positions to use as objects from a possible 798. plFiberPlate : 36 possible sky positions to use as objects from a possible 797. plFiberPlate : 18 possible sky positions to use as objects from a possible 796. plFiberPlate : 22 possible sky positions to use as objects from a possible 795. plFiberPlate : 62 possible sky positions to use as objects from a possible 794. plFiberPlate : 52 possible sky positions to use as objects from a possible 793. plFiberPlate : 37 possible sky positions to use as objects from a possible 792. plFiberPlate : 29 possible sky positions to use as objects from a possible 791. plFiberPlate : 20 possible sky positions to use as objects from a possible 790. plFiberPlate : 24 possible sky positions to use as objects from a possible 789. plFiberPlate : 28 possible sky positions to use as objects from a possible 788. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 700 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2070.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2071.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2071.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2072.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 390 to list of science objects plFiberPlate : adding sky number 510 to list of science objects plFiberPlate : adding sky number 107 to list of science objects plFiberPlate : adding sky number 202 to list of science objects plFiberPlate : adding sky number 395 to list of science objects plFiberPlate : adding sky number 519 to list of science objects plFiberPlate : adding sky number 385 to list of science objects plFiberPlate : adding sky number 184 to list of science objects plFiberPlate : adding sky number 520 to list of science objects plFiberPlate : adding sky number 109 to list of science objects plFiberPlate : adding sky number 92 to list of science objects plFiberPlate : adding sky number 294 to list of science objects plFiberPlate : adding sky number 484 to list of science objects plFiberPlate : adding sky number 393 to list of science objects plFiberPlate : adding sky number 526 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 228 to list of science objects plFiberPlate : adding sky number 408 to list of science objects plFiberPlate : adding sky number 502 to list of science objects plFiberPlate : adding sky number 315 to list of science objects plFiberPlate : adding sky number 425 to list of science objects plFiberPlate : adding sky number 536 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 530 to list of science objects plFiberPlate : adding sky number 315 to list of science objects plFiberPlate : adding sky number 532 to list of science objects plFiberPlate : adding sky number 281 to list of science objects plFiberPlate : adding sky number 314 to list of science objects plFiberPlate : adding sky number 533 to list of science objects plFiberPlate : adding sky number 453 to list of science objects plFiberPlate : adding sky number 460 to list of science objects plFiberPlate : adding sky number 335 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 42 108 2 25 72 3 32 74 4 50 97 5 30 136 6 37 86 7 37 80 8 41 116 9 45 125 10 53 150 11 38 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2960 40 6 48 41 plFiberPlate : adding spectro-photo std with objId = 2960 40 6 47 475 plFiberPlate : adding spectro-photo std with objId = 2960 40 2 47 46 plFiberPlate : adding spectro-photo std with objId = 2960 40 4 46 419 plFiberPlate : adding spectro-photo std with objId = 2960 40 4 46 367 plFiberPlate : adding spectro-photo std with objId = 2960 40 3 46 311 plFiberPlate : adding spectro-photo std with objId = 2960 40 3 46 131 plFiberPlate : adding spectro-photo std with objId = 2960 40 2 46 360 plFiberPlate : 119 possible sky positions to use as objects from a possible 564. plFiberPlate : 93 possible sky positions to use as objects from a possible 563. plFiberPlate : 62 possible sky positions to use as objects from a possible 562. plFiberPlate : 41 possible sky positions to use as objects from a possible 561. plFiberPlate : 30 possible sky positions to use as objects from a possible 560. plFiberPlate : 40 possible sky positions to use as objects from a possible 559. plFiberPlate : 25 possible sky positions to use as objects from a possible 558. plFiberPlate : 73 possible sky positions to use as objects from a possible 557. plFiberPlate : 59 possible sky positions to use as objects from a possible 556. plFiberPlate : 39 possible sky positions to use as objects from a possible 555. plFiberPlate : 24 possible sky positions to use as objects from a possible 554. plFiberPlate : 20 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 14 possible sky positions to use as objects from a possible 551. plFiberPlate : 10 possible sky positions to use as objects from a possible 550. plFiberPlate : 10 possible sky positions to use as objects from a possible 549. plFiberPlate : 79 possible sky positions to use as objects from a possible 548. plFiberPlate : 63 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 19 possible sky positions to use as objects from a possible 544. plFiberPlate : 8 possible sky positions to use as objects from a possible 543. plFiberPlate : 13 possible sky positions to use as objects from a possible 542. plFiberPlate : 14 possible sky positions to use as objects from a possible 541. plFiberPlate : 20 possible sky positions to use as objects from a possible 540. plFiberPlate : 43 possible sky positions to use as objects from a possible 539. plFiberPlate : 46 possible sky positions to use as objects from a possible 538. plFiberPlate : 18 possible sky positions to use as objects from a possible 537. plFiberPlate : 14 possible sky positions to use as objects from a possible 536. plFiberPlate : 17 possible sky positions to use as objects from a possible 535. plFiberPlate : 20 possible sky positions to use as objects from a possible 534. plFiberPlate : 9 possible sky positions to use as objects from a possible 533. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 807 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2071.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2072.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2072.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2073.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 503 to list of science objects plFiberPlate : adding sky number 761 to list of science objects plFiberPlate : adding sky number 714 to list of science objects plFiberPlate : adding sky number 247 to list of science objects plFiberPlate : adding sky number 666 to list of science objects plFiberPlate : adding sky number 448 to list of science objects plFiberPlate : adding sky number 484 to list of science objects plFiberPlate : adding sky number 576 to list of science objects plFiberPlate : adding sky number 587 to list of science objects plFiberPlate : adding sky number 601 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 456 to list of science objects plFiberPlate : adding sky number 354 to list of science objects plFiberPlate : adding sky number 125 to list of science objects plFiberPlate : adding sky number 598 to list of science objects plFiberPlate : adding sky number 649 to list of science objects plFiberPlate : adding sky number 654 to list of science objects plFiberPlate : adding sky number 497 to list of science objects plFiberPlate : adding sky number 308 to list of science objects plFiberPlate : adding sky number 457 to list of science objects plFiberPlate : adding sky number 445 to list of science objects plFiberPlate : adding sky number 480 to list of science objects plFiberPlate : adding sky number 400 to list of science objects plFiberPlate : adding sky number 110 to list of science objects plFiberPlate : adding sky number 429 to list of science objects plFiberPlate : adding sky number 24 to list of science objects plFiberPlate : adding sky number 518 to list of science objects plFiberPlate : adding sky number 382 to list of science objects plFiberPlate : adding sky number 614 to list of science objects plFiberPlate : adding sky number 379 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 360 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 40 133 2 31 113 3 30 108 4 28 138 5 30 133 6 25 108 7 26 110 8 33 137 9 35 146 10 66 192 11 43 138 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 36 155 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 36 144 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 29 274 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 28 203 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 25 306 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 24 343 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 23 228 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 23 30 plFiberPlate : 168 possible sky positions to use as objects from a possible 734. plFiberPlate : 119 possible sky positions to use as objects from a possible 733. plFiberPlate : 68 possible sky positions to use as objects from a possible 732. plFiberPlate : 35 possible sky positions to use as objects from a possible 731. plFiberPlate : 30 possible sky positions to use as objects from a possible 730. plFiberPlate : 37 possible sky positions to use as objects from a possible 729. plFiberPlate : 63 possible sky positions to use as objects from a possible 728. plFiberPlate : 101 possible sky positions to use as objects from a possible 727. plFiberPlate : 93 possible sky positions to use as objects from a possible 726. plFiberPlate : 72 possible sky positions to use as objects from a possible 725. plFiberPlate : 43 possible sky positions to use as objects from a possible 724. plFiberPlate : 32 possible sky positions to use as objects from a possible 723. plFiberPlate : 24 possible sky positions to use as objects from a possible 722. plFiberPlate : 21 possible sky positions to use as objects from a possible 721. plFiberPlate : 17 possible sky positions to use as objects from a possible 720. plFiberPlate : 30 possible sky positions to use as objects from a possible 719. plFiberPlate : 101 possible sky positions to use as objects from a possible 718. plFiberPlate : 101 possible sky positions to use as objects from a possible 717. plFiberPlate : 74 possible sky positions to use as objects from a possible 716. plFiberPlate : 46 possible sky positions to use as objects from a possible 715. plFiberPlate : 29 possible sky positions to use as objects from a possible 714. plFiberPlate : 44 possible sky positions to use as objects from a possible 713. plFiberPlate : 16 possible sky positions to use as objects from a possible 712. plFiberPlate : 21 possible sky positions to use as objects from a possible 711. plFiberPlate : 27 possible sky positions to use as objects from a possible 710. plFiberPlate : 49 possible sky positions to use as objects from a possible 709. plFiberPlate : 33 possible sky positions to use as objects from a possible 708. plFiberPlate : 22 possible sky positions to use as objects from a possible 707. plFiberPlate : 9 possible sky positions to use as objects from a possible 706. plFiberPlate : 21 possible sky positions to use as objects from a possible 705. plFiberPlate : 16 possible sky positions to use as objects from a possible 704. plFiberPlate : 28 possible sky positions to use as objects from a possible 703. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 763 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2072.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2073.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2073.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2074.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 358 to list of science objects plFiberPlate : adding sky number 34 to list of science objects plFiberPlate : adding sky number 570 to list of science objects plFiberPlate : adding sky number 269 to list of science objects plFiberPlate : adding sky number 445 to list of science objects plFiberPlate : adding sky number 315 to list of science objects plFiberPlate : adding sky number 100 to list of science objects plFiberPlate : adding sky number 287 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : adding sky number 282 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 560 to list of science objects plFiberPlate : adding sky number 401 to list of science objects plFiberPlate : adding sky number 307 to list of science objects plFiberPlate : adding sky number 327 to list of science objects plFiberPlate : adding sky number 682 to list of science objects plFiberPlate : adding sky number 40 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 437 to list of science objects plFiberPlate : adding sky number 407 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 149 to list of science objects plFiberPlate : adding sky number 427 to list of science objects plFiberPlate : adding sky number 626 to list of science objects plFiberPlate : adding sky number 499 to list of science objects plFiberPlate : adding sky number 312 to list of science objects plFiberPlate : adding sky number 296 to list of science objects plFiberPlate : adding sky number 573 to list of science objects plFiberPlate : adding sky number 641 to list of science objects plFiberPlate : adding sky number 637 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 42 126 2 39 96 3 35 104 4 20 115 5 15 124 6 9 106 7 10 117 8 28 129 9 12 139 10 58 181 11 47 129 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 27 279 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 27 124 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 20 409 plFiberPlate : adding spectro-photo std with objId = 3635 41 6 20 357 plFiberPlate : adding spectro-photo std with objId = 3635 41 5 17 68 plFiberPlate : adding spectro-photo std with objId = 3635 41 3 17 52 plFiberPlate : adding spectro-photo std with objId = 3635 41 5 16 510 plFiberPlate : adding spectro-photo std with objId = 3635 41 4 16 207 plFiberPlate : 131 possible sky positions to use as objects from a possible 671. plFiberPlate : 98 possible sky positions to use as objects from a possible 670. plFiberPlate : 80 possible sky positions to use as objects from a possible 669. plFiberPlate : 52 possible sky positions to use as objects from a possible 668. plFiberPlate : 44 possible sky positions to use as objects from a possible 667. plFiberPlate : 34 possible sky positions to use as objects from a possible 666. plFiberPlate : 63 possible sky positions to use as objects from a possible 665. plFiberPlate : 74 possible sky positions to use as objects from a possible 664. plFiberPlate : 69 possible sky positions to use as objects from a possible 663. plFiberPlate : 43 possible sky positions to use as objects from a possible 662. plFiberPlate : 32 possible sky positions to use as objects from a possible 661. plFiberPlate : 20 possible sky positions to use as objects from a possible 660. plFiberPlate : 22 possible sky positions to use as objects from a possible 659. plFiberPlate : 24 possible sky positions to use as objects from a possible 658. plFiberPlate : 25 possible sky positions to use as objects from a possible 657. plFiberPlate : 19 possible sky positions to use as objects from a possible 656. plFiberPlate : 89 possible sky positions to use as objects from a possible 655. plFiberPlate : 77 possible sky positions to use as objects from a possible 654. plFiberPlate : 55 possible sky positions to use as objects from a possible 653. plFiberPlate : 37 possible sky positions to use as objects from a possible 652. plFiberPlate : 24 possible sky positions to use as objects from a possible 651. plFiberPlate : 21 possible sky positions to use as objects from a possible 650. plFiberPlate : 15 possible sky positions to use as objects from a possible 649. plFiberPlate : 7 possible sky positions to use as objects from a possible 648. plFiberPlate : 18 possible sky positions to use as objects from a possible 647. plFiberPlate : 47 possible sky positions to use as objects from a possible 646. plFiberPlate : 26 possible sky positions to use as objects from a possible 645. plFiberPlate : 31 possible sky positions to use as objects from a possible 644. plFiberPlate : 11 possible sky positions to use as objects from a possible 643. plFiberPlate : 12 possible sky positions to use as objects from a possible 642. plFiberPlate : 25 possible sky positions to use as objects from a possible 641. plFiberPlate : 33 possible sky positions to use as objects from a possible 640. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 806 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2073.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2074.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2074.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2075.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 700 to list of science objects plFiberPlate : adding sky number 596 to list of science objects plFiberPlate : adding sky number 259 to list of science objects plFiberPlate : adding sky number 416 to list of science objects plFiberPlate : adding sky number 169 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 734 to list of science objects plFiberPlate : adding sky number 359 to list of science objects plFiberPlate : adding sky number 681 to list of science objects plFiberPlate : adding sky number 744 to list of science objects plFiberPlate : adding sky number 141 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 598 to list of science objects plFiberPlate : adding sky number 587 to list of science objects plFiberPlate : adding sky number 692 to list of science objects plFiberPlate : adding sky number 196 to list of science objects plFiberPlate : adding sky number 581 to list of science objects plFiberPlate : adding sky number 734 to list of science objects plFiberPlate : adding sky number 252 to list of science objects plFiberPlate : adding sky number 305 to list of science objects plFiberPlate : adding sky number 425 to list of science objects plFiberPlate : adding sky number 420 to list of science objects plFiberPlate : adding sky number 470 to list of science objects plFiberPlate : adding sky number 144 to list of science objects plFiberPlate : adding sky number 360 to list of science objects plFiberPlate : adding sky number 271 to list of science objects plFiberPlate : adding sky number 492 to list of science objects plFiberPlate : adding sky number 689 to list of science objects plFiberPlate : adding sky number 158 to list of science objects plFiberPlate : adding sky number 454 to list of science objects plFiberPlate : adding sky number 648 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 130 2 38 111 3 32 121 4 29 147 5 20 131 6 22 116 7 27 122 8 33 140 9 31 158 10 54 206 11 37 142 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 72 90 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 71 221 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 66 97 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 66 20 plFiberPlate : adding spectro-photo std with objId = 2740 40 5 64 118 plFiberPlate : adding spectro-photo std with objId = 2740 40 2 64 145 plFiberPlate : adding spectro-photo std with objId = 2740 40 6 63 293 plFiberPlate : adding spectro-photo std with objId = 2740 40 3 61 213 plFiberPlate : 171 possible sky positions to use as objects from a possible 747. plFiberPlate : 118 possible sky positions to use as objects from a possible 746. plFiberPlate : 88 possible sky positions to use as objects from a possible 745. plFiberPlate : 50 possible sky positions to use as objects from a possible 744. plFiberPlate : 24 possible sky positions to use as objects from a possible 743. plFiberPlate : 58 possible sky positions to use as objects from a possible 742. plFiberPlate : 71 possible sky positions to use as objects from a possible 741. plFiberPlate : 82 possible sky positions to use as objects from a possible 740. plFiberPlate : 68 possible sky positions to use as objects from a possible 739. plFiberPlate : 53 possible sky positions to use as objects from a possible 738. plFiberPlate : 41 possible sky positions to use as objects from a possible 737. plFiberPlate : 12 possible sky positions to use as objects from a possible 736. plFiberPlate : 13 possible sky positions to use as objects from a possible 735. plFiberPlate : 18 possible sky positions to use as objects from a possible 734. plFiberPlate : 23 possible sky positions to use as objects from a possible 733. plFiberPlate : 24 possible sky positions to use as objects from a possible 732. plFiberPlate : 84 possible sky positions to use as objects from a possible 731. plFiberPlate : 74 possible sky positions to use as objects from a possible 730. plFiberPlate : 67 possible sky positions to use as objects from a possible 729. plFiberPlate : 49 possible sky positions to use as objects from a possible 728. plFiberPlate : 28 possible sky positions to use as objects from a possible 727. plFiberPlate : 33 possible sky positions to use as objects from a possible 726. plFiberPlate : 21 possible sky positions to use as objects from a possible 725. plFiberPlate : 17 possible sky positions to use as objects from a possible 724. plFiberPlate : 35 possible sky positions to use as objects from a possible 723. plFiberPlate : 39 possible sky positions to use as objects from a possible 722. plFiberPlate : 48 possible sky positions to use as objects from a possible 721. plFiberPlate : 35 possible sky positions to use as objects from a possible 720. plFiberPlate : 26 possible sky positions to use as objects from a possible 719. plFiberPlate : 17 possible sky positions to use as objects from a possible 718. plFiberPlate : 34 possible sky positions to use as objects from a possible 717. plFiberPlate : 29 possible sky positions to use as objects from a possible 716. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 768 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2074.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2075.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2075.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2076.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 246 to list of science objects plFiberPlate : adding sky number 131 to list of science objects plFiberPlate : adding sky number 426 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 444 to list of science objects plFiberPlate : adding sky number 391 to list of science objects plFiberPlate : adding sky number 38 to list of science objects plFiberPlate : adding sky number 366 to list of science objects plFiberPlate : adding sky number 368 to list of science objects plFiberPlate : adding sky number 158 to list of science objects plFiberPlate : adding sky number 12 to list of science objects plFiberPlate : adding sky number 223 to list of science objects plFiberPlate : adding sky number 5 to list of science objects plFiberPlate : adding sky number 598 to list of science objects plFiberPlate : adding sky number 389 to list of science objects plFiberPlate : adding sky number 497 to list of science objects plFiberPlate : adding sky number 572 to list of science objects plFiberPlate : adding sky number 601 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 287 to list of science objects plFiberPlate : adding sky number 312 to list of science objects plFiberPlate : adding sky number 508 to list of science objects plFiberPlate : adding sky number 408 to list of science objects plFiberPlate : adding sky number 616 to list of science objects plFiberPlate : adding sky number 98 to list of science objects plFiberPlate : adding sky number 186 to list of science objects plFiberPlate : adding sky number 560 to list of science objects plFiberPlate : adding sky number 232 to list of science objects plFiberPlate : adding sky number 569 to list of science objects plFiberPlate : adding sky number 472 to list of science objects plFiberPlate : adding sky number 300 to list of science objects plFiberPlate : adding sky number 171 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 39 128 2 27 81 3 23 74 4 20 98 5 8 139 6 12 95 7 9 90 8 9 122 9 5 147 10 46 156 11 37 116 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 26 236 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 24 445 plFiberPlate : adding spectro-photo std with objId = 3631 40 6 24 344 plFiberPlate : adding spectro-photo std with objId = 3631 40 5 24 451 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 22 522 plFiberPlate : adding spectro-photo std with objId = 3631 40 2 22 422 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 21 457 plFiberPlate : adding spectro-photo std with objId = 3631 40 4 21 425 plFiberPlate : 121 possible sky positions to use as objects from a possible 629. plFiberPlate : 84 possible sky positions to use as objects from a possible 628. plFiberPlate : 52 possible sky positions to use as objects from a possible 627. plFiberPlate : 32 possible sky positions to use as objects from a possible 626. plFiberPlate : 25 possible sky positions to use as objects from a possible 625. plFiberPlate : 46 possible sky positions to use as objects from a possible 624. plFiberPlate : 39 possible sky positions to use as objects from a possible 623. plFiberPlate : 76 possible sky positions to use as objects from a possible 622. plFiberPlate : 52 possible sky positions to use as objects from a possible 621. plFiberPlate : 40 possible sky positions to use as objects from a possible 620. plFiberPlate : 31 possible sky positions to use as objects from a possible 619. plFiberPlate : 12 possible sky positions to use as objects from a possible 618. plFiberPlate : 13 possible sky positions to use as objects from a possible 617. plFiberPlate : 17 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 19 possible sky positions to use as objects from a possible 614. plFiberPlate : 94 possible sky positions to use as objects from a possible 613. plFiberPlate : 74 possible sky positions to use as objects from a possible 612. plFiberPlate : 51 possible sky positions to use as objects from a possible 611. plFiberPlate : 31 possible sky positions to use as objects from a possible 610. plFiberPlate : 16 possible sky positions to use as objects from a possible 609. plFiberPlate : 24 possible sky positions to use as objects from a possible 608. plFiberPlate : 22 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 22 possible sky positions to use as objects from a possible 605. plFiberPlate : 40 possible sky positions to use as objects from a possible 604. plFiberPlate : 31 possible sky positions to use as objects from a possible 603. plFiberPlate : 15 possible sky positions to use as objects from a possible 602. plFiberPlate : 20 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 13 possible sky positions to use as objects from a possible 599. plFiberPlate : 12 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 729 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2075.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2076.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2076.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.10.2/plPlugMapP-2077.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 638 to list of science objects plFiberPlate : adding sky number 82 to list of science objects plFiberPlate : adding sky number 581 to list of science objects plFiberPlate : adding sky number 418 to list of science objects plFiberPlate : adding sky number 481 to list of science objects plFiberPlate : adding sky number 618 to list of science objects plFiberPlate : adding sky number 122 to list of science objects plFiberPlate : adding sky number 188 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 134 to list of science objects plFiberPlate : adding sky number 415 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 83 to list of science objects plFiberPlate : adding sky number 150 to list of science objects plFiberPlate : adding sky number 624 to list of science objects plFiberPlate : adding sky number 9 to list of science objects plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 78 to list of science objects plFiberPlate : adding sky number 302 to list of science objects plFiberPlate : adding sky number 424 to list of science objects plFiberPlate : adding sky number 598 to list of science objects plFiberPlate : adding sky number 65 to list of science objects plFiberPlate : adding sky number 400 to list of science objects plFiberPlate : adding sky number 45 to list of science objects plFiberPlate : adding sky number 255 to list of science objects plFiberPlate : adding sky number 322 to list of science objects plFiberPlate : adding sky number 282 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 588 to list of science objects plFiberPlate : adding sky number 364 to list of science objects plFiberPlate : adding sky number 122 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 40 141 2 34 94 3 34 88 4 34 121 5 28 125 6 19 94 7 15 103 8 21 133 9 24 146 10 65 165 11 42 127 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1239 40 2 19 307 plFiberPlate : adding spectro-photo std with objId = 1239 40 2 19 61 plFiberPlate : adding spectro-photo std with objId = 1239 40 6 17 351 plFiberPlate : adding spectro-photo std with objId = 1239 40 6 17 71 plFiberPlate : adding spectro-photo std with objId = 1239 40 3 17 266 plFiberPlate : adding spectro-photo std with objId = 1239 40 4 15 358 plFiberPlate : adding spectro-photo std with objId = 1239 40 4 15 115 plFiberPlate : adding spectro-photo std with objId = 1239 40 3 15 339 plFiberPlate : 123 possible sky positions to use as objects from a possible 642. plFiberPlate : 90 possible sky positions to use as objects from a possible 641. plFiberPlate : 55 possible sky positions to use as objects from a possible 640. plFiberPlate : 36 possible sky positions to use as objects from a possible 639. plFiberPlate : 32 possible sky positions to use as objects from a possible 638. plFiberPlate : 26 possible sky positions to use as objects from a possible 637. plFiberPlate : 52 possible sky positions to use as objects from a possible 636. plFiberPlate : 75 possible sky positions to use as objects from a possible 635. plFiberPlate : 58 possible sky positions to use as objects from a possible 634. plFiberPlate : 45 possible sky positions to use as objects from a possible 633. plFiberPlate : 26 possible sky positions to use as objects from a possible 632. plFiberPlate : 17 possible sky positions to use as objects from a possible 631. plFiberPlate : 16 possible sky positions to use as objects from a possible 630. plFiberPlate : 21 possible sky positions to use as objects from a possible 629. plFiberPlate : 17 possible sky positions to use as objects from a possible 628. plFiberPlate : 21 possible sky positions to use as objects from a possible 627. plFiberPlate : 84 possible sky positions to use as objects from a possible 626. plFiberPlate : 71 possible sky positions to use as objects from a possible 625. plFiberPlate : 59 possible sky positions to use as objects from a possible 624. plFiberPlate : 35 possible sky positions to use as objects from a possible 623. plFiberPlate : 17 possible sky positions to use as objects from a possible 622. plFiberPlate : 17 possible sky positions to use as objects from a possible 621. plFiberPlate : 26 possible sky positions to use as objects from a possible 620. plFiberPlate : 23 possible sky positions to use as objects from a possible 619. plFiberPlate : 20 possible sky positions to use as objects from a possible 618. plFiberPlate : 54 possible sky positions to use as objects from a possible 617. plFiberPlate : 43 possible sky positions to use as objects from a possible 616. plFiberPlate : 33 possible sky positions to use as objects from a possible 615. plFiberPlate : 23 possible sky positions to use as objects from a possible 614. plFiberPlate : 13 possible sky positions to use as objects from a possible 613. plFiberPlate : 16 possible sky positions to use as objects from a possible 612. plFiberPlate : 25 possible sky positions to use as objects from a possible 611. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 732 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2076.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2077.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.10.2/plOverlay-2077.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Oct 22 19:25:42 CDT 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 20 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 87 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2058.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2058.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2058.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 31 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2059.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2059.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2059.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 83 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2060.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2060.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2060.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 114 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2061.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2061.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.5439,-9.2287) and (2.37,-12.07) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2061.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 117 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2062.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2062.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.6505,9.7447) and (-11.72,4.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2062.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 113 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2063.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2063.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2063.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 70 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2064.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2064.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2064.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 35 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2065.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2065.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2065.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 68 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2066.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2066.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2066.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 33 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2067.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2067.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2067.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 41 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2068.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2068.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.8941,8.7612) and (-11.52,3.65) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2068.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 30 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2069.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2069.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2069.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 42 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2070.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2070.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2070.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 38 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2071.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2071.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2071.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 145 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2072.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2072.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2072.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 101 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2073.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2073.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2073.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 144 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2074.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2074.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2074.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 106 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2075.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2075.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2075.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 67 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2076.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2076.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2076.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 70 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2077.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2077.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.10.2/plFanuc-2077.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Oct 22 19:26:35 CDT 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8c4dbf4 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 20 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2058 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 749 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2059 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 693 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2060 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 745 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2061 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 776 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2062 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 779 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2063 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 775 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2064 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 732 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2065 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 697 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2066 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 730 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2067 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 695 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2068 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 703 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2069 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 692 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2070 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 704 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2071 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 700 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2072 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 807 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2073 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 763 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2074 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 806 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2075 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 768 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2076 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 729 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2077 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 732 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Oct 22 19:26:52 CDT 2004 Begin running "plateEnder dr2004.10.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_101/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_101/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.10.2 -morePipes 1" failed. PS: Read file for stderr output of this job.