Sender: LSF System Subject: Job 31066: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Nov 18 17:09:34 2004 Results reported at Thu Nov 18 17:11:31 2004 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo --------------------------------------------------------------- date echo Begin setup of products needed setup dp v16_146 setup plate v3_8 echo Done setup of products needed echo --------------------------------------------------------------- date echo PATH = $PATH echo --------------------------------------------------------------- date printenv | grep _DIR | sort echo --------------------------------------------------------------- echo Kerberos Data: echo KRB5CCNAME=${KRB5CCNAME} echo --------------------------------------------------------------- cd /opdb/d1/data/drillRuns/dr2004.11.3 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 84.12 sec. Max Memory : 11 MB Max Swap : 23 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Nov 18 17:09:42 CST 2004 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Nov 18 17:09:51 CST 2004 PATH = /sdss/ups/prd/tclx/v7_4adfa/Linux/bin:/sdss/ups/prd/tk/v4_0dfa/Linux/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux/bin:/sdss/ups/prd/fsao/v3_14a/Linux/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/unity/v2_6/Linux/lib/unity/bin:/sdss/ups/prd/sdsscp/v1_44/Linux:/sdss/ups/prd/rsync/v2_5_4/Linux/bin:/sdss/ups/prd/postgres/v7_0_3/Linux/bin:/sdss/ups/prd/lsf/v5_1/Linux/bin:/sdss/ups/prd/kentools/v2_5/Linux/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_3/Linux:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/data/dp0.a/users/hlin/d5/kcorrect/bin:/sdss/ups/prd/sm/v2_4_27/Linux/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/lynx/v2_8_4/Linux/bin:/sdss/ups/prd/mt/v8_1/Linux/bin:/sdss/ups/prd/photo/v5_4_26/Linux/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux/bin:/sdss/ups/prd/spectro/v5_9_4/Linux/bin:/sdss/ups/prd/ssc/v5_3_4/Linux/bin:/sdss/ups/prd/ucac/v2_0/NULL/bin:/sdss/ups/prd/dp/v16_146/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/fpgplot/v1_8a/Linux/bin:/sdss/ups/prd/pgplot/v5_1_1fa/Linux/dst:/sdss/ups/prd/sdsstools/v4_17/Linux/bin:/sdss/ups/prd/ftcl/v3_3a/Linux/bin:/sdss/ups/prd/dervish/v8_16/Linux/bin:/sdss/ups/prd/sdssmath/v5_12/Linux/bin:/sdss/ups/prd/astrotools/v5_14/Linux/bin:/sdss/ups/prd/plate/v3_8/Linux/bin --------------------------------------------------------------- Thu Nov 18 17:09:51 CST 2004 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_14/Linux DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux DP_DIR=/sdss/ups/prd/dp/v16_146/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_3/Linux FASTT_DIR=/sdss/ups/prd/fastt/v2_0/NULL FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v1_8a/Linux FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_5/Linux LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux LYNX_DIR=/sdss/ups/prd/lynx/v2_8_4/Linux MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_5/NULL MT_DIR=/sdss/ups/prd/mt/v8_1/Linux NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_1_1fa/Linux PHOTO_DIR=/sdss/ups/prd/photo/v5_4_26/Linux PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux POSTGRES_DIR=/sdss/ups/prd/postgres/v7_0_3/Linux RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux RSYNC_DIR=/sdss/ups/prd/rsync/v2_5_4/Linux SDSSCP_DIR=/sdss/ups/prd/sdsscp/v1_44/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_17/Linux SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v2_0/NULL UNITY_DIR=/sdss/ups/prd/unity/v2_6/Linux UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: KRB5CCNAME=FILE:/tmp/krb5cc_5084_JF2Eu0 --------------------------------------------------------------- --------------------------------------------------------------- Thu Nov 18 17:09:51 CST 2004 Begin running plate --------------------------------------------------------------- Thu Nov 18 17:09:51 CST 2004 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8c5ba44 makePlates : beginning loop over plObs chain; makePlates : making 8 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1394.par makePlates : plateInfo struct for plate 2080 : (h4).mjd 53416 (h4).raCen 118.7005 (h4).decCen 15.74596 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.701 15.746 118.701 17.246 plMakePlateFromTile : mjd of obs : 53416.633978 Observed HA/dec of plate center, fiducial point (deg) : 0.998 15.739 0.997 17.238 The rotation angle of the fid. point is -2.831079 plMakePlateFromTile : beginning loop over 1181 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1395.par makePlates : plateInfo struct for plate 2081 : (h4).mjd 53416 (h4).raCen 121.4925 (h4).decCen 17.14513 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.493 17.145 121.493 18.645 plMakePlateFromTile : mjd of obs : 53416.636172 Observed HA/dec of plate center, fiducial point (deg) : -1.002 17.136 -1.003 18.636 The rotation angle of the fid. point is 3.149549 plMakePlateFromTile : beginning loop over 1150 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1396.par makePlates : plateInfo struct for plate 2082 : (h4).mjd 53416 (h4).raCen 124.2975 (h4).decCen 18.7672 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 124.297 18.767 124.297 20.267 plMakePlateFromTile : mjd of obs : 53416.635632 Observed HA/dec of plate center, fiducial point (deg) : -4.002 18.756 -4.003 20.256 The rotation angle of the fid. point is 13.605542 plMakePlateFromTile : beginning loop over 1158 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1397.par makePlates : plateInfo struct for plate 2083 : (h4).mjd 53416 (h4).raCen 127.187 (h4).decCen 20.15763 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.187 20.158 127.187 21.658 plMakePlateFromTile : mjd of obs : 53416.635325 Observed HA/dec of plate center, fiducial point (deg) : -7.002 20.145 -7.003 21.645 The rotation angle of the fid. point is 24.919168 plMakePlateFromTile : beginning loop over 1130 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1398.par makePlates : plateInfo struct for plate 2084 : (h4).mjd 53416 (h4).raCen 130.2246 (h4).decCen 21.75589 (h4).haCen -10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 130.225 21.756 130.225 23.256 plMakePlateFromTile : mjd of obs : 53416.635428 Observed HA/dec of plate center, fiducial point (deg) : -10.002 21.742 -10.003 23.241 The rotation angle of the fid. point is 36.687397 plMakePlateFromTile : beginning loop over 1158 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1399.par makePlates : plateInfo struct for plate 2085 : (h4).mjd 53416 (h4).raCen 133.1762 (h4).decCen 23.14816 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.176 23.148 133.176 24.648 plMakePlateFromTile : mjd of obs : 53416.635293 Observed HA/dec of plate center, fiducial point (deg) : -13.002 23.133 -13.003 24.632 The rotation angle of the fid. point is 47.081783 plMakePlateFromTile : beginning loop over 1169 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1400.par makePlates : plateInfo struct for plate 2086 : (h4).mjd 53416 (h4).raCen 136.3211 (h4).decCen 24.45974 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.321 24.460 136.321 25.960 plMakePlateFromTile : mjd of obs : 53416.635692 Observed HA/dec of plate center, fiducial point (deg) : -16.002 24.443 -16.003 25.942 The rotation angle of the fid. point is 55.661752 plMakePlateFromTile : beginning loop over 1140 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk99/complete//plPlugMapT-1401.par makePlates : plateInfo struct for plate 2087 : (h4).mjd 53416 (h4).raCen 139.2387 (h4).decCen 25.73966 (h4).haCen 10 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.239 25.740 139.239 27.240 plMakePlateFromTile : mjd of obs : 53416.715821 Observed HA/dec of plate center, fiducial point (deg) : 9.998 25.721 9.997 27.220 The rotation angle of the fid. point is -48.629634 plMakePlateFromTile : beginning loop over 1168 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Nov 18 17:10:05 CST 2004 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 8 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2080.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 19 2 3 5 3 15 24 4 28 71 5 32 104 6 25 84 7 35 78 8 34 72 9 33 100 10 30 77 11 16 36 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 35 346 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 32 243 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 37 71 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 40 157 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 37 12 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 35 72 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 34 297 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 40 174 plFiberPlate : 80 possible sky positions to use as objects from a possible 358. plFiberPlate : 68 possible sky positions to use as objects from a possible 357. plFiberPlate : 60 possible sky positions to use as objects from a possible 356. plFiberPlate : 49 possible sky positions to use as objects from a possible 355. plFiberPlate : 37 possible sky positions to use as objects from a possible 354. plFiberPlate : 25 possible sky positions to use as objects from a possible 353. plFiberPlate : 23 possible sky positions to use as objects from a possible 352. plFiberPlate : 51 possible sky positions to use as objects from a possible 351. plFiberPlate : 61 possible sky positions to use as objects from a possible 350. plFiberPlate : 38 possible sky positions to use as objects from a possible 349. plFiberPlate : 21 possible sky positions to use as objects from a possible 348. plFiberPlate : 17 possible sky positions to use as objects from a possible 347. plFiberPlate : 19 possible sky positions to use as objects from a possible 346. plFiberPlate : 8 possible sky positions to use as objects from a possible 345. plFiberPlate : 5 possible sky positions to use as objects from a possible 344. plFiberPlate : 5 possible sky positions to use as objects from a possible 343. plFiberPlate : 34 possible sky positions to use as objects from a possible 342. plFiberPlate : 39 possible sky positions to use as objects from a possible 341. plFiberPlate : 28 possible sky positions to use as objects from a possible 340. plFiberPlate : 12 possible sky positions to use as objects from a possible 339. plFiberPlate : 10 possible sky positions to use as objects from a possible 338. plFiberPlate : 13 possible sky positions to use as objects from a possible 337. plFiberPlate : 6 possible sky positions to use as objects from a possible 336. plFiberPlate : 5 possible sky positions to use as objects from a possible 335. plFiberPlate : 4 possible sky positions to use as objects from a possible 334. plFiberPlate : 38 possible sky positions to use as objects from a possible 333. plFiberPlate : 32 possible sky positions to use as objects from a possible 332. plFiberPlate : 19 possible sky positions to use as objects from a possible 331. plFiberPlate : 13 possible sky positions to use as objects from a possible 330. plFiberPlate : 12 possible sky positions to use as objects from a possible 329. plFiberPlate : 16 possible sky positions to use as objects from a possible 328. plFiberPlate : 7 possible sky positions to use as objects from a possible 327. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2080.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2080.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2081.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 13 2 0 1 3 5 18 4 33 60 5 42 92 6 36 76 7 32 73 8 28 78 9 32 88 10 27 51 11 9 24 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 64 219 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 46 143 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 57 52 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 61 68 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 56 269 plFiberPlate : adding spectro-photo std with objId = 4517 40 3 61 35 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 57 264 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 55 55 plFiberPlate : 61 possible sky positions to use as objects from a possible 323. plFiberPlate : 52 possible sky positions to use as objects from a possible 322. plFiberPlate : 48 possible sky positions to use as objects from a possible 321. plFiberPlate : 40 possible sky positions to use as objects from a possible 320. plFiberPlate : 31 possible sky positions to use as objects from a possible 319. plFiberPlate : 25 possible sky positions to use as objects from a possible 318. plFiberPlate : 24 possible sky positions to use as objects from a possible 317. plFiberPlate : 57 possible sky positions to use as objects from a possible 316. plFiberPlate : 51 possible sky positions to use as objects from a possible 315. plFiberPlate : 38 possible sky positions to use as objects from a possible 314. plFiberPlate : 24 possible sky positions to use as objects from a possible 313. plFiberPlate : 12 possible sky positions to use as objects from a possible 312. plFiberPlate : 7 possible sky positions to use as objects from a possible 311. plFiberPlate : 10 possible sky positions to use as objects from a possible 310. plFiberPlate : 11 possible sky positions to use as objects from a possible 309. plFiberPlate : 3 possible sky positions to use as objects from a possible 308. plFiberPlate : 48 possible sky positions to use as objects from a possible 307. plFiberPlate : 31 possible sky positions to use as objects from a possible 306. plFiberPlate : 19 possible sky positions to use as objects from a possible 305. plFiberPlate : 18 possible sky positions to use as objects from a possible 304. plFiberPlate : 14 possible sky positions to use as objects from a possible 303. plFiberPlate : 11 possible sky positions to use as objects from a possible 302. plFiberPlate : 5 possible sky positions to use as objects from a possible 301. plFiberPlate : 20 possible sky positions to use as objects from a possible 300. plFiberPlate : 6 possible sky positions to use as objects from a possible 299. plFiberPlate : 30 possible sky positions to use as objects from a possible 298. plFiberPlate : 35 possible sky positions to use as objects from a possible 297. plFiberPlate : 26 possible sky positions to use as objects from a possible 296. plFiberPlate : 15 possible sky positions to use as objects from a possible 295. plFiberPlate : 4 possible sky positions to use as objects from a possible 294. plFiberPlate : 15 possible sky positions to use as objects from a possible 293. plFiberPlate : 15 possible sky positions to use as objects from a possible 292. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2080.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2081.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2081.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2082.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 20 2 1 3 3 6 35 4 23 74 5 22 110 6 25 82 7 17 77 8 19 82 9 22 109 10 21 73 11 10 34 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 86 93 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 77 109 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 83 234 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 75 121 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 81 100 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 74 201 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 82 207 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 79 101 plFiberPlate : 82 possible sky positions to use as objects from a possible 383. plFiberPlate : 61 possible sky positions to use as objects from a possible 382. plFiberPlate : 45 possible sky positions to use as objects from a possible 381. plFiberPlate : 39 possible sky positions to use as objects from a possible 380. plFiberPlate : 27 possible sky positions to use as objects from a possible 379. plFiberPlate : 16 possible sky positions to use as objects from a possible 378. plFiberPlate : 23 possible sky positions to use as objects from a possible 377. plFiberPlate : 44 possible sky positions to use as objects from a possible 376. plFiberPlate : 42 possible sky positions to use as objects from a possible 375. plFiberPlate : 39 possible sky positions to use as objects from a possible 374. plFiberPlate : 29 possible sky positions to use as objects from a possible 373. plFiberPlate : 23 possible sky positions to use as objects from a possible 372. plFiberPlate : 22 possible sky positions to use as objects from a possible 371. plFiberPlate : 6 possible sky positions to use as objects from a possible 370. plFiberPlate : 10 possible sky positions to use as objects from a possible 369. plFiberPlate : 4 possible sky positions to use as objects from a possible 368. plFiberPlate : 61 possible sky positions to use as objects from a possible 367. plFiberPlate : 34 possible sky positions to use as objects from a possible 366. plFiberPlate : 32 possible sky positions to use as objects from a possible 365. plFiberPlate : 14 possible sky positions to use as objects from a possible 364. plFiberPlate : 8 possible sky positions to use as objects from a possible 363. plFiberPlate : 21 possible sky positions to use as objects from a possible 362. plFiberPlate : 4 possible sky positions to use as objects from a possible 361. plFiberPlate : 8 possible sky positions to use as objects from a possible 360. plFiberPlate : 9 possible sky positions to use as objects from a possible 359. plFiberPlate : 35 possible sky positions to use as objects from a possible 358. plFiberPlate : 22 possible sky positions to use as objects from a possible 357. plFiberPlate : 15 possible sky positions to use as objects from a possible 356. plFiberPlate : 9 possible sky positions to use as objects from a possible 355. plFiberPlate : 12 possible sky positions to use as objects from a possible 354. plFiberPlate : 4 possible sky positions to use as objects from a possible 353. plFiberPlate : 7 possible sky positions to use as objects from a possible 352. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2081.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2082.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2082.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2083.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 3 14 2 0 1 3 1 29 4 11 71 5 24 109 6 22 88 7 10 87 8 14 84 9 12 108 10 12 80 11 10 30 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 2 at 93.000 -263.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 90 23 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 98 135 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 101 191 plFiberPlate : adding spectro-photo std with objId = 4508 40 3 89 125 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 101 71 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 110 111 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 105 98 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 109 50 plFiberPlate : 74 possible sky positions to use as objects from a possible 385. plFiberPlate : 78 possible sky positions to use as objects from a possible 384. plFiberPlate : 70 possible sky positions to use as objects from a possible 383. plFiberPlate : 68 possible sky positions to use as objects from a possible 382. plFiberPlate : 66 possible sky positions to use as objects from a possible 381. plFiberPlate : 51 possible sky positions to use as objects from a possible 380. plFiberPlate : 40 possible sky positions to use as objects from a possible 379. plFiberPlate : 55 possible sky positions to use as objects from a possible 378. plFiberPlate : 58 possible sky positions to use as objects from a possible 377. plFiberPlate : 45 possible sky positions to use as objects from a possible 376. plFiberPlate : 48 possible sky positions to use as objects from a possible 375. plFiberPlate : 28 possible sky positions to use as objects from a possible 374. plFiberPlate : 22 possible sky positions to use as objects from a possible 373. plFiberPlate : 23 possible sky positions to use as objects from a possible 372. plFiberPlate : 11 possible sky positions to use as objects from a possible 371. plFiberPlate : 7 possible sky positions to use as objects from a possible 370. plFiberPlate : 61 possible sky positions to use as objects from a possible 369. plFiberPlate : 35 possible sky positions to use as objects from a possible 368. plFiberPlate : 21 possible sky positions to use as objects from a possible 367. plFiberPlate : 19 possible sky positions to use as objects from a possible 366. plFiberPlate : 15 possible sky positions to use as objects from a possible 365. plFiberPlate : 6 possible sky positions to use as objects from a possible 364. plFiberPlate : 6 possible sky positions to use as objects from a possible 363. plFiberPlate : 16 possible sky positions to use as objects from a possible 362. plFiberPlate : 12 possible sky positions to use as objects from a possible 361. plFiberPlate : 34 possible sky positions to use as objects from a possible 360. plFiberPlate : 37 possible sky positions to use as objects from a possible 359. plFiberPlate : 21 possible sky positions to use as objects from a possible 358. plFiberPlate : 12 possible sky positions to use as objects from a possible 357. plFiberPlate : 9 possible sky positions to use as objects from a possible 356. plFiberPlate : 19 possible sky positions to use as objects from a possible 355. plFiberPlate : 8 possible sky positions to use as objects from a possible 354. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2082.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2083.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2083.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2084.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 25 2 3 4 3 8 31 4 28 90 5 17 117 6 17 78 7 11 65 8 14 80 9 15 89 10 29 68 11 13 34 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 117 30 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 132 46 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 114 170 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 130 139 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 128 126 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 124 73 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 110 20 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 118 115 plFiberPlate : 87 possible sky positions to use as objects from a possible 391. plFiberPlate : 81 possible sky positions to use as objects from a possible 390. plFiberPlate : 55 possible sky positions to use as objects from a possible 389. plFiberPlate : 39 possible sky positions to use as objects from a possible 388. plFiberPlate : 20 possible sky positions to use as objects from a possible 387. plFiberPlate : 9 possible sky positions to use as objects from a possible 386. plFiberPlate : 27 possible sky positions to use as objects from a possible 385. plFiberPlate : 59 possible sky positions to use as objects from a possible 384. plFiberPlate : 46 possible sky positions to use as objects from a possible 383. plFiberPlate : 37 possible sky positions to use as objects from a possible 382. plFiberPlate : 18 possible sky positions to use as objects from a possible 381. plFiberPlate : 7 possible sky positions to use as objects from a possible 380. plFiberPlate : 12 possible sky positions to use as objects from a possible 379. plFiberPlate : 13 possible sky positions to use as objects from a possible 378. plFiberPlate : 9 possible sky positions to use as objects from a possible 377. plFiberPlate : 17 possible sky positions to use as objects from a possible 376. plFiberPlate : 36 possible sky positions to use as objects from a possible 375. plFiberPlate : 34 possible sky positions to use as objects from a possible 374. plFiberPlate : 20 possible sky positions to use as objects from a possible 373. plFiberPlate : 9 possible sky positions to use as objects from a possible 372. plFiberPlate : 8 possible sky positions to use as objects from a possible 371. plFiberPlate : 4 possible sky positions to use as objects from a possible 370. plFiberPlate : 9 possible sky positions to use as objects from a possible 369. plFiberPlate : 4 possible sky positions to use as objects from a possible 368. plFiberPlate : 6 possible sky positions to use as objects from a possible 367. plFiberPlate : 19 possible sky positions to use as objects from a possible 366. plFiberPlate : 19 possible sky positions to use as objects from a possible 365. plFiberPlate : 7 possible sky positions to use as objects from a possible 364. plFiberPlate : 2 possible sky positions to use as objects from a possible 363. plFiberPlate : 6 possible sky positions to use as objects from a possible 362. plFiberPlate : 11 possible sky positions to use as objects from a possible 361. plFiberPlate : 8 possible sky positions to use as objects from a possible 360. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2083.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2084.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2084.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2085.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 37 2 2 5 3 13 39 4 28 79 5 28 107 6 18 94 7 15 91 8 22 91 9 22 111 10 22 85 11 13 37 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 147 47 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 146 129 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 139 112 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 140 144 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 139 132 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 149 52 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 142 175 plFiberPlate : adding spectro-photo std with objId = 4576 40 5 137 100 plFiberPlate : 85 possible sky positions to use as objects from a possible 417. plFiberPlate : 82 possible sky positions to use as objects from a possible 416. plFiberPlate : 73 possible sky positions to use as objects from a possible 415. plFiberPlate : 59 possible sky positions to use as objects from a possible 414. plFiberPlate : 44 possible sky positions to use as objects from a possible 413. plFiberPlate : 20 possible sky positions to use as objects from a possible 412. plFiberPlate : 21 possible sky positions to use as objects from a possible 411. plFiberPlate : 42 possible sky positions to use as objects from a possible 410. plFiberPlate : 36 possible sky positions to use as objects from a possible 409. plFiberPlate : 30 possible sky positions to use as objects from a possible 408. plFiberPlate : 21 possible sky positions to use as objects from a possible 407. plFiberPlate : 13 possible sky positions to use as objects from a possible 406. plFiberPlate : 10 possible sky positions to use as objects from a possible 405. plFiberPlate : 8 possible sky positions to use as objects from a possible 404. plFiberPlate : 5 possible sky positions to use as objects from a possible 403. plFiberPlate : 17 possible sky positions to use as objects from a possible 402. plFiberPlate : 55 possible sky positions to use as objects from a possible 401. plFiberPlate : 53 possible sky positions to use as objects from a possible 400. plFiberPlate : 28 possible sky positions to use as objects from a possible 399. plFiberPlate : 26 possible sky positions to use as objects from a possible 398. plFiberPlate : 15 possible sky positions to use as objects from a possible 397. plFiberPlate : 0 possible sky positions to use as objects from a possible 396. plFiberPlate: No sky found for bundle at 73.090 105.130, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 396. plFiberPlate: No sky found for bundle at 73.090 105.130, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 396. plFiberPlate : 11 possible sky positions to use as objects from a possible 395. plFiberPlate : 13 possible sky positions to use as objects from a possible 394. plFiberPlate : 11 possible sky positions to use as objects from a possible 393. plFiberPlate : 47 possible sky positions to use as objects from a possible 392. plFiberPlate : 36 possible sky positions to use as objects from a possible 391. plFiberPlate : 33 possible sky positions to use as objects from a possible 390. plFiberPlate : 11 possible sky positions to use as objects from a possible 389. plFiberPlate : 21 possible sky positions to use as objects from a possible 388. plFiberPlate : 8 possible sky positions to use as objects from a possible 387. plFiberPlate : 6 possible sky positions to use as objects from a possible 386. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2084.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2085.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2085.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2086.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 38 2 1 1 3 7 31 4 16 92 5 21 103 6 14 81 7 10 87 8 14 108 9 16 98 10 11 82 11 7 39 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 154 119 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 157 53 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 163 37 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 162 26 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 170 66 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 165 30 plFiberPlate : adding spectro-photo std with objId = 4576 40 6 163 56 plFiberPlate : adding spectro-photo std with objId = 4569 40 4 175 53 plFiberPlate : 82 possible sky positions to use as objects from a possible 409. plFiberPlate : 85 possible sky positions to use as objects from a possible 408. plFiberPlate : 61 possible sky positions to use as objects from a possible 407. plFiberPlate : 37 possible sky positions to use as objects from a possible 406. plFiberPlate : 22 possible sky positions to use as objects from a possible 405. plFiberPlate : 12 possible sky positions to use as objects from a possible 404. plFiberPlate : 28 possible sky positions to use as objects from a possible 403. plFiberPlate : 60 possible sky positions to use as objects from a possible 402. plFiberPlate : 54 possible sky positions to use as objects from a possible 401. plFiberPlate : 43 possible sky positions to use as objects from a possible 400. plFiberPlate : 31 possible sky positions to use as objects from a possible 399. plFiberPlate : 20 possible sky positions to use as objects from a possible 398. plFiberPlate : 14 possible sky positions to use as objects from a possible 397. plFiberPlate : 19 possible sky positions to use as objects from a possible 396. plFiberPlate : 17 possible sky positions to use as objects from a possible 395. plFiberPlate : 12 possible sky positions to use as objects from a possible 394. plFiberPlate : 46 possible sky positions to use as objects from a possible 393. plFiberPlate : 37 possible sky positions to use as objects from a possible 392. plFiberPlate : 21 possible sky positions to use as objects from a possible 391. plFiberPlate : 15 possible sky positions to use as objects from a possible 390. plFiberPlate : 8 possible sky positions to use as objects from a possible 389. plFiberPlate : 8 possible sky positions to use as objects from a possible 388. plFiberPlate : 13 possible sky positions to use as objects from a possible 387. plFiberPlate : 12 possible sky positions to use as objects from a possible 386. plFiberPlate : 5 possible sky positions to use as objects from a possible 385. plFiberPlate : 28 possible sky positions to use as objects from a possible 384. plFiberPlate : 24 possible sky positions to use as objects from a possible 383. plFiberPlate : 17 possible sky positions to use as objects from a possible 382. plFiberPlate : 10 possible sky positions to use as objects from a possible 381. plFiberPlate : 9 possible sky positions to use as objects from a possible 380. plFiberPlate : 17 possible sky positions to use as objects from a possible 379. plFiberPlate : 14 possible sky positions to use as objects from a possible 378. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2085.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2086.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2086.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2004.11.3/plPlugMapP-2087.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 44 2 4 15 3 6 43 4 13 93 5 13 106 6 9 95 7 10 93 8 17 100 9 21 109 10 16 92 11 11 54 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 180 12 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 191 101 plFiberPlate : adding spectro-photo std with objId = 4569 40 5 189 52 plFiberPlate : adding spectro-photo std with objId = 4576 40 3 171 113 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 189 10 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 184 46 plFiberPlate : adding spectro-photo std with objId = 4569 40 3 196 105 plFiberPlate : adding spectro-photo std with objId = 4576 40 4 172 31 plFiberPlate : 107 possible sky positions to use as objects from a possible 446. plFiberPlate : 71 possible sky positions to use as objects from a possible 445. plFiberPlate : 58 possible sky positions to use as objects from a possible 444. plFiberPlate : 47 possible sky positions to use as objects from a possible 443. plFiberPlate : 25 possible sky positions to use as objects from a possible 442. plFiberPlate : 24 possible sky positions to use as objects from a possible 441. plFiberPlate : 34 possible sky positions to use as objects from a possible 440. plFiberPlate : 59 possible sky positions to use as objects from a possible 439. plFiberPlate : 50 possible sky positions to use as objects from a possible 438. plFiberPlate : 37 possible sky positions to use as objects from a possible 437. plFiberPlate : 21 possible sky positions to use as objects from a possible 436. plFiberPlate : 11 possible sky positions to use as objects from a possible 435. plFiberPlate : 20 possible sky positions to use as objects from a possible 434. plFiberPlate : 8 possible sky positions to use as objects from a possible 433. plFiberPlate : 9 possible sky positions to use as objects from a possible 432. plFiberPlate : 15 possible sky positions to use as objects from a possible 431. plFiberPlate : 55 possible sky positions to use as objects from a possible 430. plFiberPlate : 38 possible sky positions to use as objects from a possible 429. plFiberPlate : 32 possible sky positions to use as objects from a possible 428. plFiberPlate : 19 possible sky positions to use as objects from a possible 427. plFiberPlate : 16 possible sky positions to use as objects from a possible 426. plFiberPlate : 13 possible sky positions to use as objects from a possible 425. plFiberPlate : 6 possible sky positions to use as objects from a possible 424. plFiberPlate : 8 possible sky positions to use as objects from a possible 423. plFiberPlate : 10 possible sky positions to use as objects from a possible 422. plFiberPlate : 35 possible sky positions to use as objects from a possible 421. plFiberPlate : 49 possible sky positions to use as objects from a possible 420. plFiberPlate : 27 possible sky positions to use as objects from a possible 419. plFiberPlate : 18 possible sky positions to use as objects from a possible 418. plFiberPlate : 16 possible sky positions to use as objects from a possible 417. plFiberPlate : 12 possible sky positions to use as objects from a possible 416. plFiberPlate : 9 possible sky positions to use as objects from a possible 415. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2086.ps/CPS Open /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2087.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2004.11.3/plOverlay-2087.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Nov 18 17:10:23 CST 2004 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 8 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2080.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2080.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2080.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2081.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.5150,2.4662) and (-12.70,1.60) plMakeFanucCodes : fixed path between (5.7195,11.0738) and (3.84,11.97) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2081.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2081.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2082.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.9928,-9.1138) and (-10.00,-7.76) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2082.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2082.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2083.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2083.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2083.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2084.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2084.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2084.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2085.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2085.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2085.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2086.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.0811,7.7846) and (10.74,6.47) plMakeFanucCodes : fixed path between (11.6123,4.7622) and (12.15,3.88) plMakeFanucCodes : fixed path between (11.9455,3.7669) and (12.44,2.79) plMakeFanucCodes : fixed path between (-7.3139,10.3282) and (-5.84,11.10) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2086.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2086.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 4 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2087.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0656,-6.2162) and (-11.74,-4.82) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2087.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2004.11.3/plFanuc-2087.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Nov 18 17:10:49 CST 2004 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x8c5ae94 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 8 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2080 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2081 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2082 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2083 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2084 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2085 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2086 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2087 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Nov 18 17:10:59 CST 2004 Begin running "plateEnder dr2004.11.3 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v16_146/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v16_146/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_14/Linux/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2004.11.3 -morePipes 1" failed. PS: Read file for stderr output of this job.