Sender: LSF System Subject: Job 59080: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Mon Sep 12 21:46:15 2005 Results reported at Mon Sep 12 21:50:49 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.09.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 224.58 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Mon Sep 12 21:46:24 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Mon Sep 12 21:46:39 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_22/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Mon Sep 12 21:46:39 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_22/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_8/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Mon Sep 12 21:46:40 CDT 2005 Begin running plate --------------------------------------------------------------- Mon Sep 12 21:46:40 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x94e7ddc makePlates : beginning loop over plObs chain; makePlates : making 25 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1633.par makePlates : plateInfo struct for plate 2264 : (h4).mjd 53734 (h4).raCen 118.9523 (h4).decCen 13.927 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 118.952 13.927 118.952 15.427 plMakePlateFromTile : mjd of obs : 53734.683341 Observed HA/dec of plate center, fiducial point (deg) : -28.002 13.919 -28.003 15.418 The rotation angle of the fid. point is 48.720677 plMakePlateFromTile : beginning loop over 1350 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1642.par makePlates : plateInfo struct for plate 2265 : (h4).mjd 53734 (h4).raCen 119.8558 (h4).decCen 12.46054 (h4).haCen -29 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 119.856 12.461 119.856 13.961 plMakePlateFromTile : mjd of obs : 53734.683070 Observed HA/dec of plate center, fiducial point (deg) : -29.002 12.453 -29.003 13.952 The rotation angle of the fid. point is 47.795748 plMakePlateFromTile : beginning loop over 1189 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1647.par makePlates : plateInfo struct for plate 2266 : (h4).mjd 53734 (h4).raCen 120.1534 (h4).decCen 14.68921 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 120.153 14.689 120.153 16.189 plMakePlateFromTile : mjd of obs : 53734.681127 Observed HA/dec of plate center, fiducial point (deg) : -30.002 14.680 -30.003 16.180 The rotation angle of the fid. point is 51.134246 plMakePlateFromTile : beginning loop over 1406 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1654.par makePlates : plateInfo struct for plate 2267 : (h4).mjd 53734 (h4).raCen 121.9742 (h4).decCen 15.97076 (h4).haCen -31 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 121.974 15.971 121.974 17.471 plMakePlateFromTile : mjd of obs : 53734.683402 Observed HA/dec of plate center, fiducial point (deg) : -31.002 15.961 -31.003 17.460 The rotation angle of the fid. point is 53.367553 plMakePlateFromTile : beginning loop over 1442 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1648.par makePlates : plateInfo struct for plate 2268 : (h4).mjd 53734 (h4).raCen 122.0329 (h4).decCen 13.73662 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 122.033 13.737 122.033 15.237 plMakePlateFromTile : mjd of obs : 53734.680789 Observed HA/dec of plate center, fiducial point (deg) : -32.002 13.727 -32.003 15.227 The rotation angle of the fid. point is 51.349537 plMakePlateFromTile : beginning loop over 1312 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1649.par makePlates : plateInfo struct for plate 2269 : (h4).mjd 53734 (h4).raCen 123.7843 (h4).decCen 16.41953 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.784 16.420 123.784 17.920 plMakePlateFromTile : mjd of obs : 53734.682874 Observed HA/dec of plate center, fiducial point (deg) : -33.002 16.408 -33.003 17.908 The rotation angle of the fid. point is 55.071763 plMakePlateFromTile : beginning loop over 1452 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1652.par makePlates : plateInfo struct for plate 2270 : (h4).mjd 53734 (h4).raCen 123.917 (h4).decCen 14.58668 (h4).haCen -33 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 123.917 14.587 123.917 16.087 plMakePlateFromTile : mjd of obs : 53734.683238 Observed HA/dec of plate center, fiducial point (deg) : -33.002 14.576 -33.003 16.076 The rotation angle of the fid. point is 52.916730 plMakePlateFromTile : beginning loop over 1377 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1650.par makePlates : plateInfo struct for plate 2271 : (h4).mjd 53734 (h4).raCen 125.3734 (h4).decCen 17.61684 (h4).haCen -35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.373 17.617 125.373 19.117 plMakePlateFromTile : mjd of obs : 53734.681735 Observed HA/dec of plate center, fiducial point (deg) : -35.002 17.605 -35.003 19.104 The rotation angle of the fid. point is 57.487511 plMakePlateFromTile : beginning loop over 1416 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1656.par makePlates : plateInfo struct for plate 2272 : (h4).mjd 53734 (h4).raCen 125.4032 (h4).decCen 15.51015 (h4).haCen -20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 125.403 15.510 125.403 17.010 plMakePlateFromTile : mjd of obs : 53734.723380 Observed HA/dec of plate center, fiducial point (deg) : -20.002 15.498 -20.003 16.997 The rotation angle of the fid. point is 42.825518 plMakePlateFromTile : beginning loop over 1443 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1653.par makePlates : plateInfo struct for plate 2273 : (h4).mjd 53734 (h4).raCen 126.8483 (h4).decCen 18.40582 (h4).haCen -21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 126.848 18.406 126.848 19.906 plMakePlateFromTile : mjd of obs : 53734.724617 Observed HA/dec of plate center, fiducial point (deg) : -21.002 18.391 -21.003 19.891 The rotation angle of the fid. point is 48.582342 plMakePlateFromTile : beginning loop over 1440 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1655.par makePlates : plateInfo struct for plate 2274 : (h4).mjd 53734 (h4).raCen 127.0624 (h4).decCen 15.92031 (h4).haCen -22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 127.062 15.920 127.062 17.420 plMakePlateFromTile : mjd of obs : 53734.722435 Observed HA/dec of plate center, fiducial point (deg) : -22.002 15.907 -22.003 17.406 The rotation angle of the fid. point is 45.763227 plMakePlateFromTile : beginning loop over 1357 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1639.par makePlates : plateInfo struct for plate 2275 : (h4).mjd 53734 (h4).raCen 128.3464 (h4).decCen 19.12828 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.346 19.128 128.346 20.628 plMakePlateFromTile : mjd of obs : 53734.723225 Observed HA/dec of plate center, fiducial point (deg) : -23.002 19.113 -23.003 20.612 The rotation angle of the fid. point is 51.870684 plMakePlateFromTile : beginning loop over 1427 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1643.par makePlates : plateInfo struct for plate 2276 : (h4).mjd 53734 (h4).raCen 128.6133 (h4).decCen 16.54703 (h4).haCen -23 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 128.613 16.547 128.613 18.047 plMakePlateFromTile : mjd of obs : 53734.723960 Observed HA/dec of plate center, fiducial point (deg) : -23.002 16.533 -23.003 18.032 The rotation angle of the fid. point is 47.744122 plMakePlateFromTile : beginning loop over 1385 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1635.par makePlates : plateInfo struct for plate 2277 : (h4).mjd 53734 (h4).raCen 129.9759 (h4).decCen 19.77424 (h4).haCen -24 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 129.976 19.774 129.976 21.274 plMakePlateFromTile : mjd of obs : 53734.724968 Observed HA/dec of plate center, fiducial point (deg) : -24.002 19.758 -24.003 21.257 The rotation angle of the fid. point is 53.874223 plMakePlateFromTile : beginning loop over 1428 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (3.09, -50.60, 7.5) and (1.86, -48.10, 7.3) checkLTHo : distance = 2.787, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(3.09, -50.60, 7.5) checkLTHo : collision between LIGHT_TRAPs (22.54, -19.02, 7.7) and (23.77, -22.67, 6.5) checkLTHo : distance = 3.854, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(22.54, -19.02, 7.7) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1641.par makePlates : plateInfo struct for plate 2278 : (h4).mjd 53734 (h4).raCen 130.1795 (h4).decCen 17.20121 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 130.179 17.201 130.179 18.701 plMakePlateFromTile : mjd of obs : 53734.722757 Observed HA/dec of plate center, fiducial point (deg) : -25.002 17.186 -25.003 18.685 The rotation angle of the fid. point is 50.609661 plMakePlateFromTile : beginning loop over 1414 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1638.par makePlates : plateInfo struct for plate 2279 : (h4).mjd 53734 (h4).raCen 131.7492 (h4).decCen 17.88252 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 131.749 17.883 131.749 19.383 plMakePlateFromTile : mjd of obs : 53734.724335 Observed HA/dec of plate center, fiducial point (deg) : -26.002 17.866 -26.003 19.366 The rotation angle of the fid. point is 52.466726 plMakePlateFromTile : beginning loop over 1360 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1632.par makePlates : plateInfo struct for plate 2280 : (h4).mjd 53734 (h4).raCen 132.136 (h4).decCen 20.80022 (h4).haCen -12 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 132.136 20.800 132.136 22.300 plMakePlateFromTile : mjd of obs : 53734.764205 Observed HA/dec of plate center, fiducial point (deg) : -12.002 20.782 -12.003 22.281 The rotation angle of the fid. point is 39.226350 plMakePlateFromTile : beginning loop over 1373 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1645.par makePlates : plateInfo struct for plate 2281 : (h4).mjd 53734 (h4).raCen 133.1145 (h4).decCen 18.3864 (h4).haCen -13 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 133.114 18.386 133.114 19.886 plMakePlateFromTile : mjd of obs : 53734.764140 Observed HA/dec of plate center, fiducial point (deg) : -13.002 18.369 -13.003 19.868 The rotation angle of the fid. point is 36.525181 plMakePlateFromTile : beginning loop over 1370 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1634.par makePlates : plateInfo struct for plate 2282 : (h4).mjd 53734 (h4).raCen 134.1473 (h4).decCen 21.4741 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.147 21.474 134.147 22.974 plMakePlateFromTile : mjd of obs : 53734.764234 Observed HA/dec of plate center, fiducial point (deg) : -14.002 21.455 -14.003 22.954 The rotation angle of the fid. point is 44.737005 plMakePlateFromTile : beginning loop over 1380 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1646.par makePlates : plateInfo struct for plate 2283 : (h4).mjd 53734 (h4).raCen 134.5214 (h4).decCen 18.89094 (h4).haCen -14 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.521 18.891 134.521 20.391 plMakePlateFromTile : mjd of obs : 53734.765267 Observed HA/dec of plate center, fiducial point (deg) : -14.002 18.872 -14.003 20.372 The rotation angle of the fid. point is 39.340488 plMakePlateFromTile : beginning loop over 1412 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1640.par makePlates : plateInfo struct for plate 2284 : (h4).mjd 53734 (h4).raCen 135.9967 (h4).decCen 22.27474 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 135.997 22.275 135.997 23.775 plMakePlateFromTile : mjd of obs : 53734.766586 Observed HA/dec of plate center, fiducial point (deg) : -15.002 22.254 -15.003 23.754 The rotation angle of the fid. point is 48.383886 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (173.50, 154.30, 7.0) and (173.30, 153.86, 7.4) checkLTHo : distance = 0.480, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(173.30, 153.86, 7.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1651.par makePlates : plateInfo struct for plate 2285 : (h4).mjd 53734 (h4).raCen 136.1924 (h4).decCen 19.42811 (h4).haCen -16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 136.192 19.428 136.192 20.928 plMakePlateFromTile : mjd of obs : 53734.764353 Observed HA/dec of plate center, fiducial point (deg) : -16.002 19.409 -16.003 20.908 The rotation angle of the fid. point is 43.781353 plMakePlateFromTile : beginning loop over 1397 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1644.par makePlates : plateInfo struct for plate 2286 : (h4).mjd 53734 (h4).raCen 137.5632 (h4).decCen 19.94975 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.563 19.950 137.563 21.450 plMakePlateFromTile : mjd of obs : 53734.765380 Observed HA/dec of plate center, fiducial point (deg) : -17.002 19.929 -17.003 21.429 The rotation angle of the fid. point is 46.327550 plMakePlateFromTile : beginning loop over 1334 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1636.par makePlates : plateInfo struct for plate 2287 : (h4).mjd 53734 (h4).raCen 137.8839 (h4).decCen 23.02344 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 137.884 23.023 137.884 24.523 plMakePlateFromTile : mjd of obs : 53734.766272 Observed HA/dec of plate center, fiducial point (deg) : -17.002 23.002 -17.003 24.501 The rotation angle of the fid. point is 53.186416 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-204.85, -8.55, 7.0) and (-205.06, -8.99, 7.4) checkLTHo : distance = 0.480, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-205.06, -8.99, 7.4) checkLTHo : collision between LIGHT_TRAPs (289.08, 139.06, 8.2) and (288.88, 138.72, 7.9) checkLTHo : distance = 0.386, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(289.08, 139.06, 8.2) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk122/complete//plPlugMapT-1637.par makePlates : plateInfo struct for plate 2288 : (h4).mjd 53734 (h4).raCen 139.2396 (h4).decCen 20.47283 (h4).haCen -19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -1.9 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.240 20.473 139.240 21.973 plMakePlateFromTile : mjd of obs : 53734.764481 Observed HA/dec of plate center, fiducial point (deg) : -19.002 20.452 -19.003 21.951 The rotation angle of the fid. point is 50.049474 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Mon Sep 12 21:47:25 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 25 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2264.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 34 112 2 33 82 3 16 51 4 12 45 5 34 89 6 41 92 7 27 81 8 32 93 9 37 94 10 56 117 11 45 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 48 215 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 36 414 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 40 341 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 23 305 plFiberPlate : adding spectro-photo std with objId = 5037 40 5 38 216 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 38 331 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 41 166 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 30 372 plFiberPlate : 68 possible sky positions to use as objects from a possible 465. plFiberPlate : 46 possible sky positions to use as objects from a possible 464. plFiberPlate : 40 possible sky positions to use as objects from a possible 463. plFiberPlate : 24 possible sky positions to use as objects from a possible 462. plFiberPlate : 25 possible sky positions to use as objects from a possible 461. plFiberPlate : 50 possible sky positions to use as objects from a possible 460. plFiberPlate : 54 possible sky positions to use as objects from a possible 459. plFiberPlate : 49 possible sky positions to use as objects from a possible 458. plFiberPlate : 41 possible sky positions to use as objects from a possible 457. plFiberPlate : 32 possible sky positions to use as objects from a possible 456. plFiberPlate : 25 possible sky positions to use as objects from a possible 455. plFiberPlate : 13 possible sky positions to use as objects from a possible 454. plFiberPlate : 12 possible sky positions to use as objects from a possible 453. plFiberPlate : 34 possible sky positions to use as objects from a possible 452. plFiberPlate : 18 possible sky positions to use as objects from a possible 451. plFiberPlate : 14 possible sky positions to use as objects from a possible 450. plFiberPlate : 50 possible sky positions to use as objects from a possible 449. plFiberPlate : 41 possible sky positions to use as objects from a possible 448. plFiberPlate : 27 possible sky positions to use as objects from a possible 447. plFiberPlate : 21 possible sky positions to use as objects from a possible 446. plFiberPlate : 10 possible sky positions to use as objects from a possible 445. plFiberPlate : 14 possible sky positions to use as objects from a possible 444. plFiberPlate : 11 possible sky positions to use as objects from a possible 443. plFiberPlate : 10 possible sky positions to use as objects from a possible 442. plFiberPlate : 10 possible sky positions to use as objects from a possible 441. plFiberPlate : 33 possible sky positions to use as objects from a possible 440. plFiberPlate : 7 possible sky positions to use as objects from a possible 439. plFiberPlate : 19 possible sky positions to use as objects from a possible 438. plFiberPlate : 10 possible sky positions to use as objects from a possible 437. plFiberPlate : 11 possible sky positions to use as objects from a possible 436. plFiberPlate : 19 possible sky positions to use as objects from a possible 435. plFiberPlate : 11 possible sky positions to use as objects from a possible 434. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2264.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2264.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2265.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 31 2 2 8 3 12 21 4 22 53 5 48 90 6 34 80 7 22 77 8 32 76 9 31 88 10 22 66 11 12 37 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 48 92 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 36 414 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 34 288 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 61 156 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 74 141 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 59 304 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 59 38 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 72 176 plFiberPlate : 56 possible sky positions to use as objects from a possible 335. plFiberPlate : 51 possible sky positions to use as objects from a possible 334. plFiberPlate : 44 possible sky positions to use as objects from a possible 333. plFiberPlate : 34 possible sky positions to use as objects from a possible 332. plFiberPlate : 26 possible sky positions to use as objects from a possible 331. plFiberPlate : 19 possible sky positions to use as objects from a possible 330. plFiberPlate : 21 possible sky positions to use as objects from a possible 329. plFiberPlate : 37 possible sky positions to use as objects from a possible 328. plFiberPlate : 22 possible sky positions to use as objects from a possible 327. plFiberPlate : 15 possible sky positions to use as objects from a possible 326. plFiberPlate : 9 possible sky positions to use as objects from a possible 325. plFiberPlate : 7 possible sky positions to use as objects from a possible 324. plFiberPlate : 4 possible sky positions to use as objects from a possible 323. plFiberPlate : 7 possible sky positions to use as objects from a possible 322. plFiberPlate : 7 possible sky positions to use as objects from a possible 321. plFiberPlate : 4 possible sky positions to use as objects from a possible 320. plFiberPlate : 48 possible sky positions to use as objects from a possible 319. plFiberPlate : 51 possible sky positions to use as objects from a possible 318. plFiberPlate : 36 possible sky positions to use as objects from a possible 317. plFiberPlate : 16 possible sky positions to use as objects from a possible 316. plFiberPlate : 10 possible sky positions to use as objects from a possible 315. plFiberPlate : 5 possible sky positions to use as objects from a possible 314. plFiberPlate : 5 possible sky positions to use as objects from a possible 313. plFiberPlate : 13 possible sky positions to use as objects from a possible 312. plFiberPlate : 8 possible sky positions to use as objects from a possible 311. plFiberPlate : 37 possible sky positions to use as objects from a possible 310. plFiberPlate : 41 possible sky positions to use as objects from a possible 309. plFiberPlate : 25 possible sky positions to use as objects from a possible 308. plFiberPlate : 14 possible sky positions to use as objects from a possible 307. plFiberPlate : 13 possible sky positions to use as objects from a possible 306. plFiberPlate : 21 possible sky positions to use as objects from a possible 305. plFiberPlate : 12 possible sky positions to use as objects from a possible 304. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 685 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2264.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2265.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2265.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2266.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 37 85 2 30 85 3 29 84 4 41 90 5 35 105 6 28 78 7 27 74 8 37 83 9 23 75 10 43 125 11 38 84 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 40 36 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 58 284 plFiberPlate : adding spectro-photo std with objId = 5037 40 3 50 245 plFiberPlate : adding spectro-photo std with objId = 5037 40 5 38 216 plFiberPlate : adding spectro-photo std with objId = 5037 40 5 50 154 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 43 203 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 42 37 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 45 118 plFiberPlate : 102 possible sky positions to use as objects from a possible 492. plFiberPlate : 54 possible sky positions to use as objects from a possible 491. plFiberPlate : 37 possible sky positions to use as objects from a possible 490. plFiberPlate : 20 possible sky positions to use as objects from a possible 489. plFiberPlate : 11 possible sky positions to use as objects from a possible 488. plFiberPlate : 19 possible sky positions to use as objects from a possible 487. plFiberPlate : 31 possible sky positions to use as objects from a possible 486. plFiberPlate : 42 possible sky positions to use as objects from a possible 485. plFiberPlate : 43 possible sky positions to use as objects from a possible 484. plFiberPlate : 24 possible sky positions to use as objects from a possible 483. plFiberPlate : 11 possible sky positions to use as objects from a possible 482. plFiberPlate : 10 possible sky positions to use as objects from a possible 481. plFiberPlate : 7 possible sky positions to use as objects from a possible 480. plFiberPlate : 10 possible sky positions to use as objects from a possible 479. plFiberPlate : 10 possible sky positions to use as objects from a possible 478. plFiberPlate : 15 possible sky positions to use as objects from a possible 477. plFiberPlate : 38 possible sky positions to use as objects from a possible 476. plFiberPlate : 22 possible sky positions to use as objects from a possible 475. plFiberPlate : 10 possible sky positions to use as objects from a possible 474. plFiberPlate : 1 possible sky positions to use as objects from a possible 473. plFiberPlate : 11 possible sky positions to use as objects from a possible 472. plFiberPlate : 15 possible sky positions to use as objects from a possible 471. plFiberPlate : 12 possible sky positions to use as objects from a possible 470. plFiberPlate : 7 possible sky positions to use as objects from a possible 469. plFiberPlate : 6 possible sky positions to use as objects from a possible 468. plFiberPlate : 47 possible sky positions to use as objects from a possible 467. plFiberPlate : 9 possible sky positions to use as objects from a possible 466. plFiberPlate : 4 possible sky positions to use as objects from a possible 465. plFiberPlate : 6 possible sky positions to use as objects from a possible 464. plFiberPlate : 5 possible sky positions to use as objects from a possible 463. plFiberPlate : 11 possible sky positions to use as objects from a possible 462. plFiberPlate : 17 possible sky positions to use as objects from a possible 461. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2265.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2266.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2266.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2267.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 38 123 2 24 93 3 26 80 4 35 94 5 36 118 6 44 93 7 27 74 8 26 92 9 35 81 10 46 125 11 38 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5037 40 5 66 119 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 73 74 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 52 101 plFiberPlate : adding spectro-photo std with objId = 5037 40 3 50 245 plFiberPlate : adding spectro-photo std with objId = 5045 40 2 76 185 plFiberPlate : adding spectro-photo std with objId = 5037 40 3 60 23 plFiberPlate : adding spectro-photo std with objId = 5037 40 4 62 269 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 62 106 plFiberPlate : 95 possible sky positions to use as objects from a possible 544. plFiberPlate : 52 possible sky positions to use as objects from a possible 543. plFiberPlate : 27 possible sky positions to use as objects from a possible 542. plFiberPlate : 17 possible sky positions to use as objects from a possible 541. plFiberPlate : 13 possible sky positions to use as objects from a possible 540. plFiberPlate : 25 possible sky positions to use as objects from a possible 539. plFiberPlate : 68 possible sky positions to use as objects from a possible 538. plFiberPlate : 59 possible sky positions to use as objects from a possible 537. plFiberPlate : 39 possible sky positions to use as objects from a possible 536. plFiberPlate : 20 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 5 possible sky positions to use as objects from a possible 533. plFiberPlate : 0 possible sky positions to use as objects from a possible 532. plFiberPlate: No sky found for bundle at -11.610 -60.955, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 532. plFiberPlate: No sky found for bundle at -11.610 -60.955, increase box by 20 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 532. plFiberPlate : 6 possible sky positions to use as objects from a possible 531. plFiberPlate : 33 possible sky positions to use as objects from a possible 530. plFiberPlate : 22 possible sky positions to use as objects from a possible 529. plFiberPlate : 34 possible sky positions to use as objects from a possible 528. plFiberPlate : 18 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 10 possible sky positions to use as objects from a possible 525. plFiberPlate : 7 possible sky positions to use as objects from a possible 524. plFiberPlate : 4 possible sky positions to use as objects from a possible 523. plFiberPlate : 7 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 32 possible sky positions to use as objects from a possible 520. plFiberPlate : 98 possible sky positions to use as objects from a possible 519. plFiberPlate : 7 possible sky positions to use as objects from a possible 518. plFiberPlate : 7 possible sky positions to use as objects from a possible 517. plFiberPlate : 11 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 5 possible sky positions to use as objects from a possible 514. plFiberPlate : 13 possible sky positions to use as objects from a possible 513. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2266.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2267.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2267.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2268.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 69 2 7 33 3 17 52 4 22 92 5 34 91 6 20 73 7 22 73 8 28 93 9 26 94 10 26 123 11 19 66 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 40 165 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 48 92 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 53 150 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 44 219 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 74 141 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 43 203 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 72 176 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 86 234 plFiberPlate : 102 possible sky positions to use as objects from a possible 442. plFiberPlate : 66 possible sky positions to use as objects from a possible 441. plFiberPlate : 53 possible sky positions to use as objects from a possible 440. plFiberPlate : 19 possible sky positions to use as objects from a possible 439. plFiberPlate : 15 possible sky positions to use as objects from a possible 438. plFiberPlate : 20 possible sky positions to use as objects from a possible 437. plFiberPlate : 27 possible sky positions to use as objects from a possible 436. plFiberPlate : 62 possible sky positions to use as objects from a possible 435. plFiberPlate : 46 possible sky positions to use as objects from a possible 434. plFiberPlate : 23 possible sky positions to use as objects from a possible 433. plFiberPlate : 10 possible sky positions to use as objects from a possible 432. plFiberPlate : 10 possible sky positions to use as objects from a possible 431. plFiberPlate : 8 possible sky positions to use as objects from a possible 430. plFiberPlate : 4 possible sky positions to use as objects from a possible 429. plFiberPlate : 5 possible sky positions to use as objects from a possible 428. plFiberPlate : 9 possible sky positions to use as objects from a possible 427. plFiberPlate : 57 possible sky positions to use as objects from a possible 426. plFiberPlate : 31 possible sky positions to use as objects from a possible 425. plFiberPlate : 27 possible sky positions to use as objects from a possible 424. plFiberPlate : 13 possible sky positions to use as objects from a possible 423. plFiberPlate : 7 possible sky positions to use as objects from a possible 422. plFiberPlate : 10 possible sky positions to use as objects from a possible 421. plFiberPlate : 10 possible sky positions to use as objects from a possible 420. plFiberPlate : 25 possible sky positions to use as objects from a possible 419. plFiberPlate : 22 possible sky positions to use as objects from a possible 418. plFiberPlate : 40 possible sky positions to use as objects from a possible 417. plFiberPlate : 26 possible sky positions to use as objects from a possible 416. plFiberPlate : 13 possible sky positions to use as objects from a possible 415. plFiberPlate : 8 possible sky positions to use as objects from a possible 414. plFiberPlate : 7 possible sky positions to use as objects from a possible 413. plFiberPlate : 17 possible sky positions to use as objects from a possible 412. plFiberPlate : 6 possible sky positions to use as objects from a possible 411. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 685 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2267.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2268.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2268.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2269.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 33 110 2 28 98 3 23 90 4 30 110 5 26 102 6 24 84 7 32 77 8 37 102 9 33 99 10 47 148 11 34 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 67 227 plFiberPlate : adding spectro-photo std with objId = 5045 40 2 90 118 plFiberPlate : adding spectro-photo std with objId = 5045 40 2 76 185 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 67 57 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 85 214 plFiberPlate : adding spectro-photo std with objId = 5037 40 4 62 269 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 80 110 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 62 106 plFiberPlate : 124 possible sky positions to use as objects from a possible 565. plFiberPlate : 72 possible sky positions to use as objects from a possible 564. plFiberPlate : 43 possible sky positions to use as objects from a possible 563. plFiberPlate : 23 possible sky positions to use as objects from a possible 562. plFiberPlate : 24 possible sky positions to use as objects from a possible 561. plFiberPlate : 30 possible sky positions to use as objects from a possible 560. plFiberPlate : 48 possible sky positions to use as objects from a possible 559. plFiberPlate : 63 possible sky positions to use as objects from a possible 558. plFiberPlate : 62 possible sky positions to use as objects from a possible 557. plFiberPlate : 44 possible sky positions to use as objects from a possible 556. plFiberPlate : 23 possible sky positions to use as objects from a possible 555. plFiberPlate : 16 possible sky positions to use as objects from a possible 554. plFiberPlate : 15 possible sky positions to use as objects from a possible 553. plFiberPlate : 18 possible sky positions to use as objects from a possible 552. plFiberPlate : 16 possible sky positions to use as objects from a possible 551. plFiberPlate : 7 possible sky positions to use as objects from a possible 550. plFiberPlate : 56 possible sky positions to use as objects from a possible 549. plFiberPlate : 30 possible sky positions to use as objects from a possible 548. plFiberPlate : 37 possible sky positions to use as objects from a possible 547. plFiberPlate : 30 possible sky positions to use as objects from a possible 546. plFiberPlate : 23 possible sky positions to use as objects from a possible 545. plFiberPlate : 14 possible sky positions to use as objects from a possible 544. plFiberPlate : 13 possible sky positions to use as objects from a possible 543. plFiberPlate : 21 possible sky positions to use as objects from a possible 542. plFiberPlate : 36 possible sky positions to use as objects from a possible 541. plFiberPlate : 49 possible sky positions to use as objects from a possible 540. plFiberPlate : 30 possible sky positions to use as objects from a possible 539. plFiberPlate : 12 possible sky positions to use as objects from a possible 538. plFiberPlate : 6 possible sky positions to use as objects from a possible 537. plFiberPlate : 10 possible sky positions to use as objects from a possible 536. plFiberPlate : 18 possible sky positions to use as objects from a possible 535. plFiberPlate : 14 possible sky positions to use as objects from a possible 534. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2268.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2269.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2269.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2270.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 95 2 14 46 3 19 67 4 29 95 5 29 106 6 27 96 7 22 89 8 31 104 9 29 98 10 37 124 11 28 91 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 90 237 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 53 150 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 71 112 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 90 22 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 95 101 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 66 136 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 86 234 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 62 106 plFiberPlate : 111 possible sky positions to use as objects from a possible 507. plFiberPlate : 64 possible sky positions to use as objects from a possible 506. plFiberPlate : 32 possible sky positions to use as objects from a possible 505. plFiberPlate : 18 possible sky positions to use as objects from a possible 504. plFiberPlate : 19 possible sky positions to use as objects from a possible 503. plFiberPlate : 30 possible sky positions to use as objects from a possible 502. plFiberPlate : 32 possible sky positions to use as objects from a possible 501. plFiberPlate : 48 possible sky positions to use as objects from a possible 500. plFiberPlate : 35 possible sky positions to use as objects from a possible 499. plFiberPlate : 16 possible sky positions to use as objects from a possible 498. plFiberPlate : 11 possible sky positions to use as objects from a possible 497. plFiberPlate : 8 possible sky positions to use as objects from a possible 496. plFiberPlate : 24 possible sky positions to use as objects from a possible 495. plFiberPlate : 8 possible sky positions to use as objects from a possible 494. plFiberPlate : 2 possible sky positions to use as objects from a possible 493. plFiberPlate : 23 possible sky positions to use as objects from a possible 492. plFiberPlate : 55 possible sky positions to use as objects from a possible 491. plFiberPlate : 36 possible sky positions to use as objects from a possible 490. plFiberPlate : 28 possible sky positions to use as objects from a possible 489. plFiberPlate : 17 possible sky positions to use as objects from a possible 488. plFiberPlate : 14 possible sky positions to use as objects from a possible 487. plFiberPlate : 11 possible sky positions to use as objects from a possible 486. plFiberPlate : 11 possible sky positions to use as objects from a possible 485. plFiberPlate : 12 possible sky positions to use as objects from a possible 484. plFiberPlate : 8 possible sky positions to use as objects from a possible 483. plFiberPlate : 52 possible sky positions to use as objects from a possible 482. plFiberPlate : 48 possible sky positions to use as objects from a possible 481. plFiberPlate : 24 possible sky positions to use as objects from a possible 480. plFiberPlate : 12 possible sky positions to use as objects from a possible 479. plFiberPlate : 14 possible sky positions to use as objects from a possible 478. plFiberPlate : 26 possible sky positions to use as objects from a possible 477. plFiberPlate : 18 possible sky positions to use as objects from a possible 476. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2269.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2270.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2270.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2271.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 32 97 2 26 89 3 29 88 4 31 96 5 29 113 6 29 105 7 26 96 8 24 97 9 29 109 10 47 141 11 30 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 75 142 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 93 78 plFiberPlate : adding spectro-photo std with objId = 5037 40 4 79 303 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 94 221 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 76 36 plFiberPlate : adding spectro-photo std with objId = 5037 40 3 81 39 plFiberPlate : adding spectro-photo std with objId = 5037 40 4 91 22 plFiberPlate : adding spectro-photo std with objId = 5037 40 5 84 259 plFiberPlate : 119 possible sky positions to use as objects from a possible 550. plFiberPlate : 84 possible sky positions to use as objects from a possible 549. plFiberPlate : 45 possible sky positions to use as objects from a possible 548. plFiberPlate : 45 possible sky positions to use as objects from a possible 547. plFiberPlate : 36 possible sky positions to use as objects from a possible 546. plFiberPlate : 21 possible sky positions to use as objects from a possible 545. plFiberPlate : 31 possible sky positions to use as objects from a possible 544. plFiberPlate : 70 possible sky positions to use as objects from a possible 543. plFiberPlate : 56 possible sky positions to use as objects from a possible 542. plFiberPlate : 38 possible sky positions to use as objects from a possible 541. plFiberPlate : 13 possible sky positions to use as objects from a possible 540. plFiberPlate : 15 possible sky positions to use as objects from a possible 539. plFiberPlate : 15 possible sky positions to use as objects from a possible 538. plFiberPlate : 17 possible sky positions to use as objects from a possible 537. plFiberPlate : 4 possible sky positions to use as objects from a possible 536. plFiberPlate : 10 possible sky positions to use as objects from a possible 535. plFiberPlate : 34 possible sky positions to use as objects from a possible 534. plFiberPlate : 24 possible sky positions to use as objects from a possible 533. plFiberPlate : 24 possible sky positions to use as objects from a possible 532. plFiberPlate : 20 possible sky positions to use as objects from a possible 531. plFiberPlate : 4 possible sky positions to use as objects from a possible 530. plFiberPlate : 12 possible sky positions to use as objects from a possible 529. plFiberPlate : 8 possible sky positions to use as objects from a possible 528. plFiberPlate : 10 possible sky positions to use as objects from a possible 527. plFiberPlate : 6 possible sky positions to use as objects from a possible 526. plFiberPlate : 48 possible sky positions to use as objects from a possible 525. plFiberPlate : 21 possible sky positions to use as objects from a possible 524. plFiberPlate : 12 possible sky positions to use as objects from a possible 523. plFiberPlate : 11 possible sky positions to use as objects from a possible 522. plFiberPlate : 13 possible sky positions to use as objects from a possible 521. plFiberPlate : 9 possible sky positions to use as objects from a possible 520. plFiberPlate : 14 possible sky positions to use as objects from a possible 519. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 676 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2270.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2271.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2271.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2272.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 27 102 2 28 83 3 28 89 4 28 99 5 35 134 6 28 93 7 23 98 8 18 105 9 31 85 10 53 143 11 39 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 85 89 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 80 150 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 113 159 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 66 136 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 82 6 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 76 36 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 116 77 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 107 136 plFiberPlate : 116 possible sky positions to use as objects from a possible 570. plFiberPlate : 61 possible sky positions to use as objects from a possible 569. plFiberPlate : 56 possible sky positions to use as objects from a possible 568. plFiberPlate : 55 possible sky positions to use as objects from a possible 567. plFiberPlate : 31 possible sky positions to use as objects from a possible 566. plFiberPlate : 26 possible sky positions to use as objects from a possible 565. plFiberPlate : 47 possible sky positions to use as objects from a possible 564. plFiberPlate : 78 possible sky positions to use as objects from a possible 563. plFiberPlate : 62 possible sky positions to use as objects from a possible 562. plFiberPlate : 32 possible sky positions to use as objects from a possible 561. plFiberPlate : 14 possible sky positions to use as objects from a possible 560. plFiberPlate : 20 possible sky positions to use as objects from a possible 559. plFiberPlate : 16 possible sky positions to use as objects from a possible 558. plFiberPlate : 4 possible sky positions to use as objects from a possible 557. plFiberPlate : 19 possible sky positions to use as objects from a possible 556. plFiberPlate : 11 possible sky positions to use as objects from a possible 555. plFiberPlate : 55 possible sky positions to use as objects from a possible 554. plFiberPlate : 41 possible sky positions to use as objects from a possible 553. plFiberPlate : 6 possible sky positions to use as objects from a possible 552. plFiberPlate : 3 possible sky positions to use as objects from a possible 551. plFiberPlate : 9 possible sky positions to use as objects from a possible 550. plFiberPlate : 4 possible sky positions to use as objects from a possible 549. plFiberPlate : 14 possible sky positions to use as objects from a possible 548. plFiberPlate : 14 possible sky positions to use as objects from a possible 547. plFiberPlate : 16 possible sky positions to use as objects from a possible 546. plFiberPlate : 57 possible sky positions to use as objects from a possible 545. plFiberPlate : 42 possible sky positions to use as objects from a possible 544. plFiberPlate : 21 possible sky positions to use as objects from a possible 543. plFiberPlate : 15 possible sky positions to use as objects from a possible 542. plFiberPlate : 26 possible sky positions to use as objects from a possible 541. plFiberPlate : 23 possible sky positions to use as objects from a possible 540. plFiberPlate : 37 possible sky positions to use as objects from a possible 539. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2271.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2272.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2272.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2273.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 116 2 27 84 3 25 81 4 31 96 5 29 113 6 21 106 7 25 94 8 31 107 9 31 113 10 39 135 11 28 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 83 218 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 86 159 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 101 34 plFiberPlate : adding spectro-photo std with objId = 5037 40 2 97 131 plFiberPlate : adding spectro-photo std with objId = 5037 40 5 99 208 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 89 128 plFiberPlate : adding spectro-photo std with objId = 5037 40 4 91 22 plFiberPlate : adding spectro-photo std with objId = 5037 40 5 84 259 plFiberPlate : 114 possible sky positions to use as objects from a possible 592. plFiberPlate : 50 possible sky positions to use as objects from a possible 591. plFiberPlate : 25 possible sky positions to use as objects from a possible 590. plFiberPlate : 15 possible sky positions to use as objects from a possible 589. plFiberPlate : 22 possible sky positions to use as objects from a possible 588. plFiberPlate : 19 possible sky positions to use as objects from a possible 587. plFiberPlate : 56 possible sky positions to use as objects from a possible 586. plFiberPlate : 88 possible sky positions to use as objects from a possible 585. plFiberPlate : 60 possible sky positions to use as objects from a possible 584. plFiberPlate : 35 possible sky positions to use as objects from a possible 583. plFiberPlate : 21 possible sky positions to use as objects from a possible 582. plFiberPlate : 6 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 8 possible sky positions to use as objects from a possible 579. plFiberPlate : 16 possible sky positions to use as objects from a possible 578. plFiberPlate : 42 possible sky positions to use as objects from a possible 577. plFiberPlate : 70 possible sky positions to use as objects from a possible 576. plFiberPlate : 53 possible sky positions to use as objects from a possible 575. plFiberPlate : 38 possible sky positions to use as objects from a possible 574. plFiberPlate : 32 possible sky positions to use as objects from a possible 573. plFiberPlate : 24 possible sky positions to use as objects from a possible 572. plFiberPlate : 7 possible sky positions to use as objects from a possible 571. plFiberPlate : 37 possible sky positions to use as objects from a possible 570. plFiberPlate : 21 possible sky positions to use as objects from a possible 569. plFiberPlate : 30 possible sky positions to use as objects from a possible 568. plFiberPlate : 65 possible sky positions to use as objects from a possible 567. plFiberPlate : 31 possible sky positions to use as objects from a possible 566. plFiberPlate : 26 possible sky positions to use as objects from a possible 565. plFiberPlate : 17 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : 30 possible sky positions to use as objects from a possible 562. plFiberPlate : 14 possible sky positions to use as objects from a possible 561. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 678 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2272.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2273.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2273.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2274.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 100 2 8 55 3 17 74 4 16 107 5 25 116 6 29 104 7 29 95 8 23 102 9 34 110 10 25 123 11 12 92 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 109 178 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 116 114 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 108 145 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 83 266 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 89 128 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 116 77 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 125 137 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 107 136 plFiberPlate : 112 possible sky positions to use as objects from a possible 537. plFiberPlate : 80 possible sky positions to use as objects from a possible 536. plFiberPlate : 24 possible sky positions to use as objects from a possible 535. plFiberPlate : 10 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 15 possible sky positions to use as objects from a possible 532. plFiberPlate : 51 possible sky positions to use as objects from a possible 531. plFiberPlate : 81 possible sky positions to use as objects from a possible 530. plFiberPlate : 63 possible sky positions to use as objects from a possible 529. plFiberPlate : 51 possible sky positions to use as objects from a possible 528. plFiberPlate : 34 possible sky positions to use as objects from a possible 527. plFiberPlate : 13 possible sky positions to use as objects from a possible 526. plFiberPlate : 18 possible sky positions to use as objects from a possible 525. plFiberPlate : 10 possible sky positions to use as objects from a possible 524. plFiberPlate : 31 possible sky positions to use as objects from a possible 523. plFiberPlate : 17 possible sky positions to use as objects from a possible 522. plFiberPlate : 57 possible sky positions to use as objects from a possible 521. plFiberPlate : 45 possible sky positions to use as objects from a possible 520. plFiberPlate : 50 possible sky positions to use as objects from a possible 519. plFiberPlate : 38 possible sky positions to use as objects from a possible 518. plFiberPlate : 19 possible sky positions to use as objects from a possible 517. plFiberPlate : 9 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 12 possible sky positions to use as objects from a possible 514. plFiberPlate : 27 possible sky positions to use as objects from a possible 513. plFiberPlate : 69 possible sky positions to use as objects from a possible 512. plFiberPlate : 54 possible sky positions to use as objects from a possible 511. plFiberPlate : 35 possible sky positions to use as objects from a possible 510. plFiberPlate : 19 possible sky positions to use as objects from a possible 509. plFiberPlate : 41 possible sky positions to use as objects from a possible 508. plFiberPlate : 29 possible sky positions to use as objects from a possible 507. plFiberPlate : 28 possible sky positions to use as objects from a possible 506. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2273.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2274.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2274.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2275.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 113 2 13 84 3 15 93 4 28 105 5 30 119 6 28 105 7 26 93 8 25 104 9 20 100 10 25 154 11 21 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 2 101 34 plFiberPlate : adding spectro-photo std with objId = 5037 40 2 97 131 plFiberPlate : adding spectro-photo std with objId = 5038 40 3 13 89 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 18 51 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 97 105 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 23 290 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 106 75 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 123 169 plFiberPlate : 125 possible sky positions to use as objects from a possible 599. plFiberPlate : 73 possible sky positions to use as objects from a possible 598. plFiberPlate : 36 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 32 possible sky positions to use as objects from a possible 595. plFiberPlate : 22 possible sky positions to use as objects from a possible 594. plFiberPlate : 46 possible sky positions to use as objects from a possible 593. plFiberPlate : 79 possible sky positions to use as objects from a possible 592. plFiberPlate : 55 possible sky positions to use as objects from a possible 591. plFiberPlate : 37 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : 21 possible sky positions to use as objects from a possible 588. plFiberPlate : 16 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 17 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : 52 possible sky positions to use as objects from a possible 583. plFiberPlate : 31 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 7 possible sky positions to use as objects from a possible 580. plFiberPlate : 10 possible sky positions to use as objects from a possible 579. plFiberPlate : 10 possible sky positions to use as objects from a possible 578. plFiberPlate : 21 possible sky positions to use as objects from a possible 577. plFiberPlate : 13 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 94 possible sky positions to use as objects from a possible 574. plFiberPlate : 45 possible sky positions to use as objects from a possible 573. plFiberPlate : 21 possible sky positions to use as objects from a possible 572. plFiberPlate : 23 possible sky positions to use as objects from a possible 571. plFiberPlate : 32 possible sky positions to use as objects from a possible 570. plFiberPlate : 26 possible sky positions to use as objects from a possible 569. plFiberPlate : 8 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2274.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2275.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2275.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2276.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 112 2 12 51 3 18 65 4 22 100 5 31 111 6 21 99 7 18 97 8 18 117 9 23 123 10 39 132 11 23 89 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 119 72 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 121 174 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 103 111 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 89 128 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 97 105 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 97 11 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 129 195 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 103 93 plFiberPlate : 105 possible sky positions to use as objects from a possible 552. plFiberPlate : 62 possible sky positions to use as objects from a possible 551. plFiberPlate : 30 possible sky positions to use as objects from a possible 550. plFiberPlate : 21 possible sky positions to use as objects from a possible 549. plFiberPlate : 15 possible sky positions to use as objects from a possible 548. plFiberPlate : 23 possible sky positions to use as objects from a possible 547. plFiberPlate : 38 possible sky positions to use as objects from a possible 546. plFiberPlate : 82 possible sky positions to use as objects from a possible 545. plFiberPlate : 53 possible sky positions to use as objects from a possible 544. plFiberPlate : 36 possible sky positions to use as objects from a possible 543. plFiberPlate : 9 possible sky positions to use as objects from a possible 542. plFiberPlate : 7 possible sky positions to use as objects from a possible 541. plFiberPlate : 11 possible sky positions to use as objects from a possible 540. plFiberPlate : 13 possible sky positions to use as objects from a possible 539. plFiberPlate : 10 possible sky positions to use as objects from a possible 538. plFiberPlate : 37 possible sky positions to use as objects from a possible 537. plFiberPlate : 99 possible sky positions to use as objects from a possible 536. plFiberPlate : 83 possible sky positions to use as objects from a possible 535. plFiberPlate : 55 possible sky positions to use as objects from a possible 534. plFiberPlate : 47 possible sky positions to use as objects from a possible 533. plFiberPlate : 28 possible sky positions to use as objects from a possible 532. plFiberPlate : 13 possible sky positions to use as objects from a possible 531. plFiberPlate : 36 possible sky positions to use as objects from a possible 530. plFiberPlate : 23 possible sky positions to use as objects from a possible 529. plFiberPlate : 26 possible sky positions to use as objects from a possible 528. plFiberPlate : 30 possible sky positions to use as objects from a possible 527. plFiberPlate : 41 possible sky positions to use as objects from a possible 526. plFiberPlate : 25 possible sky positions to use as objects from a possible 525. plFiberPlate : 24 possible sky positions to use as objects from a possible 524. plFiberPlate : 10 possible sky positions to use as objects from a possible 523. plFiberPlate : 11 possible sky positions to use as objects from a possible 522. plFiberPlate : 21 possible sky positions to use as objects from a possible 521. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2275.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2276.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2276.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2277.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 124 2 19 101 3 13 91 4 13 111 5 23 118 6 18 100 7 16 95 8 22 101 9 21 97 10 29 150 11 21 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 114 128 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 18 51 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 23 290 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 28 184 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 123 169 plFiberPlate : adding spectro-photo std with objId = 5045 40 2 118 36 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 34 101 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 129 49 plFiberPlate : 107 possible sky positions to use as objects from a possible 601. plFiberPlate : 85 possible sky positions to use as objects from a possible 600. plFiberPlate : 57 possible sky positions to use as objects from a possible 599. plFiberPlate : 32 possible sky positions to use as objects from a possible 598. plFiberPlate : 21 possible sky positions to use as objects from a possible 597. plFiberPlate : 30 possible sky positions to use as objects from a possible 596. plFiberPlate : 61 possible sky positions to use as objects from a possible 595. plFiberPlate : 82 possible sky positions to use as objects from a possible 594. plFiberPlate : 62 possible sky positions to use as objects from a possible 593. plFiberPlate : 40 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 21 possible sky positions to use as objects from a possible 586. plFiberPlate : 73 possible sky positions to use as objects from a possible 585. plFiberPlate : 38 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 2 possible sky positions to use as objects from a possible 582. plFiberPlate : 2 possible sky positions to use as objects from a possible 581. plFiberPlate : 13 possible sky positions to use as objects from a possible 580. plFiberPlate : 11 possible sky positions to use as objects from a possible 579. plFiberPlate : 23 possible sky positions to use as objects from a possible 578. plFiberPlate : 11 possible sky positions to use as objects from a possible 577. plFiberPlate : 66 possible sky positions to use as objects from a possible 576. plFiberPlate : 32 possible sky positions to use as objects from a possible 575. plFiberPlate : 26 possible sky positions to use as objects from a possible 574. plFiberPlate : 15 possible sky positions to use as objects from a possible 573. plFiberPlate : 6 possible sky positions to use as objects from a possible 572. plFiberPlate : 15 possible sky positions to use as objects from a possible 571. plFiberPlate : 19 possible sky positions to use as objects from a possible 570. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 702 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2276.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2277.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2277.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2278.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 136 2 15 88 3 12 84 4 17 104 5 26 117 6 23 87 7 22 85 8 24 105 9 24 98 10 26 149 11 21 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5125 41 5 18 44 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 146 96 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 111 71 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 108 40 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 137 145 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 97 11 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 116 30 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 129 195 plFiberPlate : 111 possible sky positions to use as objects from a possible 587. plFiberPlate : 70 possible sky positions to use as objects from a possible 586. plFiberPlate : 18 possible sky positions to use as objects from a possible 585. plFiberPlate : 13 possible sky positions to use as objects from a possible 584. plFiberPlate : 22 possible sky positions to use as objects from a possible 583. plFiberPlate : 39 possible sky positions to use as objects from a possible 582. plFiberPlate : 43 possible sky positions to use as objects from a possible 581. plFiberPlate : 88 possible sky positions to use as objects from a possible 580. plFiberPlate : 59 possible sky positions to use as objects from a possible 579. plFiberPlate : 47 possible sky positions to use as objects from a possible 578. plFiberPlate : 29 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 12 possible sky positions to use as objects from a possible 574. plFiberPlate : 27 possible sky positions to use as objects from a possible 573. plFiberPlate : 42 possible sky positions to use as objects from a possible 572. plFiberPlate : 69 possible sky positions to use as objects from a possible 571. plFiberPlate : 52 possible sky positions to use as objects from a possible 570. plFiberPlate : 48 possible sky positions to use as objects from a possible 569. plFiberPlate : 29 possible sky positions to use as objects from a possible 568. plFiberPlate : 17 possible sky positions to use as objects from a possible 567. plFiberPlate : 9 possible sky positions to use as objects from a possible 566. plFiberPlate : 7 possible sky positions to use as objects from a possible 565. plFiberPlate : 21 possible sky positions to use as objects from a possible 564. plFiberPlate : 53 possible sky positions to use as objects from a possible 563. plFiberPlate : 42 possible sky positions to use as objects from a possible 562. plFiberPlate : 34 possible sky positions to use as objects from a possible 561. plFiberPlate : 15 possible sky positions to use as objects from a possible 560. plFiberPlate : 7 possible sky positions to use as objects from a possible 559. plFiberPlate : 10 possible sky positions to use as objects from a possible 558. plFiberPlate : 21 possible sky positions to use as objects from a possible 557. plFiberPlate : 18 possible sky positions to use as objects from a possible 556. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2277.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2278.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2278.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2279.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 34 116 2 21 87 3 19 91 4 24 106 5 26 111 6 24 84 7 19 78 8 23 93 9 19 100 10 35 146 11 28 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 146 96 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 110 76 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 111 71 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 155 39 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 144 179 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 142 144 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 119 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 119 63 plFiberPlate : 106 possible sky positions to use as objects from a possible 543. plFiberPlate : 83 possible sky positions to use as objects from a possible 542. plFiberPlate : 23 possible sky positions to use as objects from a possible 541. plFiberPlate : 11 possible sky positions to use as objects from a possible 540. plFiberPlate : 35 possible sky positions to use as objects from a possible 539. plFiberPlate : 29 possible sky positions to use as objects from a possible 538. plFiberPlate : 21 possible sky positions to use as objects from a possible 537. plFiberPlate : 82 possible sky positions to use as objects from a possible 536. plFiberPlate : 85 possible sky positions to use as objects from a possible 535. plFiberPlate : 65 possible sky positions to use as objects from a possible 534. plFiberPlate : 46 possible sky positions to use as objects from a possible 533. plFiberPlate : 20 possible sky positions to use as objects from a possible 532. plFiberPlate : 18 possible sky positions to use as objects from a possible 531. plFiberPlate : 18 possible sky positions to use as objects from a possible 530. plFiberPlate : 27 possible sky positions to use as objects from a possible 529. plFiberPlate : 19 possible sky positions to use as objects from a possible 528. plFiberPlate : 47 possible sky positions to use as objects from a possible 527. plFiberPlate : 59 possible sky positions to use as objects from a possible 526. plFiberPlate : 31 possible sky positions to use as objects from a possible 525. plFiberPlate : 9 possible sky positions to use as objects from a possible 524. plFiberPlate : 14 possible sky positions to use as objects from a possible 523. plFiberPlate : 13 possible sky positions to use as objects from a possible 522. plFiberPlate : 10 possible sky positions to use as objects from a possible 521. plFiberPlate : 7 possible sky positions to use as objects from a possible 520. plFiberPlate : 5 possible sky positions to use as objects from a possible 519. plFiberPlate : 46 possible sky positions to use as objects from a possible 518. plFiberPlate : 21 possible sky positions to use as objects from a possible 517. plFiberPlate : 15 possible sky positions to use as objects from a possible 516. plFiberPlate : 12 possible sky positions to use as objects from a possible 515. plFiberPlate : 7 possible sky positions to use as objects from a possible 514. plFiberPlate : 12 possible sky positions to use as objects from a possible 513. plFiberPlate : 15 possible sky positions to use as objects from a possible 512. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 679 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2278.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2279.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2279.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2280.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 118 2 16 88 3 20 78 4 23 104 5 19 115 6 29 77 7 29 97 8 30 119 9 26 111 10 28 131 11 19 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 135 178 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 149 9 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 45 126 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 129 128 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 139 119 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 132 68 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 146 137 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 34 101 plFiberPlate : 103 possible sky positions to use as objects from a possible 579. plFiberPlate : 69 possible sky positions to use as objects from a possible 578. plFiberPlate : 33 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 35 possible sky positions to use as objects from a possible 575. plFiberPlate : 41 possible sky positions to use as objects from a possible 574. plFiberPlate : 43 possible sky positions to use as objects from a possible 573. plFiberPlate : 78 possible sky positions to use as objects from a possible 572. plFiberPlate : 44 possible sky positions to use as objects from a possible 571. plFiberPlate : 25 possible sky positions to use as objects from a possible 570. plFiberPlate : 20 possible sky positions to use as objects from a possible 569. plFiberPlate : 16 possible sky positions to use as objects from a possible 568. plFiberPlate : 16 possible sky positions to use as objects from a possible 567. plFiberPlate : 10 possible sky positions to use as objects from a possible 566. plFiberPlate : 20 possible sky positions to use as objects from a possible 565. plFiberPlate : 19 possible sky positions to use as objects from a possible 564. plFiberPlate : 83 possible sky positions to use as objects from a possible 563. plFiberPlate : 66 possible sky positions to use as objects from a possible 562. plFiberPlate : 41 possible sky positions to use as objects from a possible 561. plFiberPlate : 32 possible sky positions to use as objects from a possible 560. plFiberPlate : 23 possible sky positions to use as objects from a possible 559. plFiberPlate : 17 possible sky positions to use as objects from a possible 558. plFiberPlate : 27 possible sky positions to use as objects from a possible 557. plFiberPlate : 26 possible sky positions to use as objects from a possible 556. plFiberPlate : 31 possible sky positions to use as objects from a possible 555. plFiberPlate : 33 possible sky positions to use as objects from a possible 554. plFiberPlate : 28 possible sky positions to use as objects from a possible 553. plFiberPlate : 20 possible sky positions to use as objects from a possible 552. plFiberPlate : 17 possible sky positions to use as objects from a possible 551. plFiberPlate : 5 possible sky positions to use as objects from a possible 550. plFiberPlate : 22 possible sky positions to use as objects from a possible 549. plFiberPlate : 16 possible sky positions to use as objects from a possible 548. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2279.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2280.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2280.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2281.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 23 91 2 18 79 3 23 87 4 25 103 5 31 105 6 20 81 7 13 88 8 11 101 9 25 100 10 33 142 11 21 83 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 130 57 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 160 65 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 155 79 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 155 39 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 142 67 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 122 122 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 165 172 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 138 52 plFiberPlate : 134 possible sky positions to use as objects from a possible 548. plFiberPlate : 56 possible sky positions to use as objects from a possible 547. plFiberPlate : 22 possible sky positions to use as objects from a possible 546. plFiberPlate : 14 possible sky positions to use as objects from a possible 545. plFiberPlate : 8 possible sky positions to use as objects from a possible 544. plFiberPlate : 23 possible sky positions to use as objects from a possible 543. plFiberPlate : 32 possible sky positions to use as objects from a possible 542. plFiberPlate : 87 possible sky positions to use as objects from a possible 541. plFiberPlate : 53 possible sky positions to use as objects from a possible 540. plFiberPlate : 27 possible sky positions to use as objects from a possible 539. plFiberPlate : 9 possible sky positions to use as objects from a possible 538. plFiberPlate : 6 possible sky positions to use as objects from a possible 537. plFiberPlate : 12 possible sky positions to use as objects from a possible 536. plFiberPlate : 21 possible sky positions to use as objects from a possible 535. plFiberPlate : 16 possible sky positions to use as objects from a possible 534. plFiberPlate : 11 possible sky positions to use as objects from a possible 533. plFiberPlate : 85 possible sky positions to use as objects from a possible 532. plFiberPlate : 74 possible sky positions to use as objects from a possible 531. plFiberPlate : 50 possible sky positions to use as objects from a possible 530. plFiberPlate : 20 possible sky positions to use as objects from a possible 529. plFiberPlate : 21 possible sky positions to use as objects from a possible 528. plFiberPlate : 17 possible sky positions to use as objects from a possible 527. plFiberPlate : 14 possible sky positions to use as objects from a possible 526. plFiberPlate : 18 possible sky positions to use as objects from a possible 525. plFiberPlate : 14 possible sky positions to use as objects from a possible 524. plFiberPlate : 38 possible sky positions to use as objects from a possible 523. plFiberPlate : 35 possible sky positions to use as objects from a possible 522. plFiberPlate : 21 possible sky positions to use as objects from a possible 521. plFiberPlate : 14 possible sky positions to use as objects from a possible 520. plFiberPlate : 28 possible sky positions to use as objects from a possible 519. plFiberPlate : 13 possible sky positions to use as objects from a possible 518. plFiberPlate : 10 possible sky positions to use as objects from a possible 517. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 681 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2280.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2281.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2281.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2282.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 109 2 18 99 3 17 85 4 30 115 5 29 121 6 17 94 7 17 86 8 26 108 9 18 109 10 31 146 11 21 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5038 40 3 51 34 plFiberPlate : adding spectro-photo std with objId = 5038 40 3 48 73 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 45 126 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 156 80 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 155 14 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 58 116 plFiberPlate : adding spectro-photo std with objId = 5045 40 4 146 137 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 132 68 plFiberPlate : 124 possible sky positions to use as objects from a possible 579. plFiberPlate : 54 possible sky positions to use as objects from a possible 578. plFiberPlate : 29 possible sky positions to use as objects from a possible 577. plFiberPlate : 20 possible sky positions to use as objects from a possible 576. plFiberPlate : 26 possible sky positions to use as objects from a possible 575. plFiberPlate : 31 possible sky positions to use as objects from a possible 574. plFiberPlate : 29 possible sky positions to use as objects from a possible 573. plFiberPlate : 91 possible sky positions to use as objects from a possible 572. plFiberPlate : 43 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 6 possible sky positions to use as objects from a possible 569. plFiberPlate : 20 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 7 possible sky positions to use as objects from a possible 566. plFiberPlate : 14 possible sky positions to use as objects from a possible 565. plFiberPlate : 5 possible sky positions to use as objects from a possible 564. plFiberPlate : 78 possible sky positions to use as objects from a possible 563. plFiberPlate : 40 possible sky positions to use as objects from a possible 562. plFiberPlate : 21 possible sky positions to use as objects from a possible 561. plFiberPlate : 7 possible sky positions to use as objects from a possible 560. plFiberPlate : 4 possible sky positions to use as objects from a possible 559. plFiberPlate : 12 possible sky positions to use as objects from a possible 558. plFiberPlate : 21 possible sky positions to use as objects from a possible 557. plFiberPlate : 14 possible sky positions to use as objects from a possible 556. plFiberPlate : 4 possible sky positions to use as objects from a possible 555. plFiberPlate : 53 possible sky positions to use as objects from a possible 554. plFiberPlate : 20 possible sky positions to use as objects from a possible 553. plFiberPlate : 31 possible sky positions to use as objects from a possible 552. plFiberPlate : 2 possible sky positions to use as objects from a possible 551. plFiberPlate : 6 possible sky positions to use as objects from a possible 550. plFiberPlate : 21 possible sky positions to use as objects from a possible 549. plFiberPlate : 17 possible sky positions to use as objects from a possible 548. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2281.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2282.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2282.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2283.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 119 2 11 84 3 18 88 4 14 108 5 26 136 6 21 102 7 14 92 8 13 101 9 17 116 10 21 151 11 13 103 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 163 117 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 139 41 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 136 77 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 133 78 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 166 18 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 142 67 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 165 172 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 147 6 plFiberPlate : 124 possible sky positions to use as objects from a possible 614. plFiberPlate : 90 possible sky positions to use as objects from a possible 613. plFiberPlate : 42 possible sky positions to use as objects from a possible 612. plFiberPlate : 16 possible sky positions to use as objects from a possible 611. plFiberPlate : 13 possible sky positions to use as objects from a possible 610. plFiberPlate : 22 possible sky positions to use as objects from a possible 609. plFiberPlate : 54 possible sky positions to use as objects from a possible 608. plFiberPlate : 98 possible sky positions to use as objects from a possible 607. plFiberPlate : 79 possible sky positions to use as objects from a possible 606. plFiberPlate : 57 possible sky positions to use as objects from a possible 605. plFiberPlate : 39 possible sky positions to use as objects from a possible 604. plFiberPlate : 13 possible sky positions to use as objects from a possible 603. plFiberPlate : 7 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 14 possible sky positions to use as objects from a possible 600. plFiberPlate : 28 possible sky positions to use as objects from a possible 599. plFiberPlate : 77 possible sky positions to use as objects from a possible 598. plFiberPlate : 67 possible sky positions to use as objects from a possible 597. plFiberPlate : 29 possible sky positions to use as objects from a possible 596. plFiberPlate : 14 possible sky positions to use as objects from a possible 595. plFiberPlate : 13 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 13 possible sky positions to use as objects from a possible 592. plFiberPlate : 15 possible sky positions to use as objects from a possible 591. plFiberPlate : 10 possible sky positions to use as objects from a possible 590. plFiberPlate : 61 possible sky positions to use as objects from a possible 589. plFiberPlate : 48 possible sky positions to use as objects from a possible 588. plFiberPlate : 18 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 22 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 17 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2282.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2283.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2283.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2284.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 125 2 5 97 3 15 94 4 24 111 5 33 115 6 21 87 7 14 87 8 19 103 9 18 106 10 20 153 11 12 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5038 40 5 73 121 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 170 17 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 152 50 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 70 152 plFiberPlate : adding spectro-photo std with objId = 5045 40 2 172 51 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 152 108 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 172 54 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 58 116 plFiberPlate : 136 possible sky positions to use as objects from a possible 586. plFiberPlate : 93 possible sky positions to use as objects from a possible 585. plFiberPlate : 57 possible sky positions to use as objects from a possible 584. plFiberPlate : 32 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 31 possible sky positions to use as objects from a possible 581. plFiberPlate : 59 possible sky positions to use as objects from a possible 580. plFiberPlate : 96 possible sky positions to use as objects from a possible 579. plFiberPlate : 58 possible sky positions to use as objects from a possible 578. plFiberPlate : 31 possible sky positions to use as objects from a possible 577. plFiberPlate : 13 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : 9 possible sky positions to use as objects from a possible 574. plFiberPlate : 17 possible sky positions to use as objects from a possible 573. plFiberPlate : 28 possible sky positions to use as objects from a possible 572. plFiberPlate : 25 possible sky positions to use as objects from a possible 571. plFiberPlate : 62 possible sky positions to use as objects from a possible 570. plFiberPlate : 40 possible sky positions to use as objects from a possible 569. plFiberPlate : 20 possible sky positions to use as objects from a possible 568. plFiberPlate : 15 possible sky positions to use as objects from a possible 567. plFiberPlate : 8 possible sky positions to use as objects from a possible 566. plFiberPlate : 4 possible sky positions to use as objects from a possible 565. plFiberPlate : 25 possible sky positions to use as objects from a possible 564. plFiberPlate : 21 possible sky positions to use as objects from a possible 563. plFiberPlate : 14 possible sky positions to use as objects from a possible 562. plFiberPlate : 47 possible sky positions to use as objects from a possible 561. plFiberPlate : 28 possible sky positions to use as objects from a possible 560. plFiberPlate : 23 possible sky positions to use as objects from a possible 559. plFiberPlate : 13 possible sky positions to use as objects from a possible 558. plFiberPlate : 15 possible sky positions to use as objects from a possible 557. plFiberPlate : 12 possible sky positions to use as objects from a possible 556. plFiberPlate : 21 possible sky positions to use as objects from a possible 555. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2283.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2284.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2284.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2285.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 123 2 21 81 3 19 95 4 27 117 5 17 119 6 9 98 7 15 92 8 15 112 9 19 121 10 28 145 11 21 104 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 173 77 plFiberPlate : adding spectro-photo std with objId = 5137 40 6 164 31 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 149 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 175 102 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 151 221 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 185 82 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 164 158 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 186 172 plFiberPlate : 125 possible sky positions to use as objects from a possible 618. plFiberPlate : 66 possible sky positions to use as objects from a possible 617. plFiberPlate : 25 possible sky positions to use as objects from a possible 616. plFiberPlate : 11 possible sky positions to use as objects from a possible 615. plFiberPlate : 26 possible sky positions to use as objects from a possible 614. plFiberPlate : 23 possible sky positions to use as objects from a possible 613. plFiberPlate : 43 possible sky positions to use as objects from a possible 612. plFiberPlate : 105 possible sky positions to use as objects from a possible 611. plFiberPlate : 66 possible sky positions to use as objects from a possible 610. plFiberPlate : 39 possible sky positions to use as objects from a possible 609. plFiberPlate : 3 possible sky positions to use as objects from a possible 608. plFiberPlate : 7 possible sky positions to use as objects from a possible 607. plFiberPlate : 18 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 29 possible sky positions to use as objects from a possible 604. plFiberPlate : 41 possible sky positions to use as objects from a possible 603. plFiberPlate : 96 possible sky positions to use as objects from a possible 602. plFiberPlate : 78 possible sky positions to use as objects from a possible 601. plFiberPlate : 56 possible sky positions to use as objects from a possible 600. plFiberPlate : 41 possible sky positions to use as objects from a possible 599. plFiberPlate : 24 possible sky positions to use as objects from a possible 598. plFiberPlate : 9 possible sky positions to use as objects from a possible 597. plFiberPlate : 40 possible sky positions to use as objects from a possible 596. plFiberPlate : 31 possible sky positions to use as objects from a possible 595. plFiberPlate : 26 possible sky positions to use as objects from a possible 594. plFiberPlate : 36 possible sky positions to use as objects from a possible 593. plFiberPlate : 19 possible sky positions to use as objects from a possible 592. plFiberPlate : 26 possible sky positions to use as objects from a possible 591. plFiberPlate : 23 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 20 possible sky positions to use as objects from a possible 588. plFiberPlate : 30 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2284.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2285.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2285.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2286.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 110 2 12 85 3 12 94 4 15 106 5 16 105 6 12 71 7 20 78 8 20 114 9 22 99 10 22 149 11 14 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 160 70 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 170 76 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 185 82 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 193 108 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 169 10 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 160 81 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 164 158 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 186 172 plFiberPlate : 129 possible sky positions to use as objects from a possible 563. plFiberPlate : 73 possible sky positions to use as objects from a possible 562. plFiberPlate : 38 possible sky positions to use as objects from a possible 561. plFiberPlate : 18 possible sky positions to use as objects from a possible 560. plFiberPlate : 26 possible sky positions to use as objects from a possible 559. plFiberPlate : 22 possible sky positions to use as objects from a possible 558. plFiberPlate : 39 possible sky positions to use as objects from a possible 557. plFiberPlate : 72 possible sky positions to use as objects from a possible 556. plFiberPlate : 74 possible sky positions to use as objects from a possible 555. plFiberPlate : 52 possible sky positions to use as objects from a possible 554. plFiberPlate : 41 possible sky positions to use as objects from a possible 553. plFiberPlate : 15 possible sky positions to use as objects from a possible 552. plFiberPlate : 12 possible sky positions to use as objects from a possible 551. plFiberPlate : 16 possible sky positions to use as objects from a possible 550. plFiberPlate : 12 possible sky positions to use as objects from a possible 549. plFiberPlate : 39 possible sky positions to use as objects from a possible 548. plFiberPlate : 80 possible sky positions to use as objects from a possible 547. plFiberPlate : 75 possible sky positions to use as objects from a possible 546. plFiberPlate : 54 possible sky positions to use as objects from a possible 545. plFiberPlate : 42 possible sky positions to use as objects from a possible 544. plFiberPlate : 21 possible sky positions to use as objects from a possible 543. plFiberPlate : 9 possible sky positions to use as objects from a possible 542. plFiberPlate : 23 possible sky positions to use as objects from a possible 541. plFiberPlate : 48 possible sky positions to use as objects from a possible 540. plFiberPlate : 17 possible sky positions to use as objects from a possible 539. plFiberPlate : 23 possible sky positions to use as objects from a possible 538. plFiberPlate : 28 possible sky positions to use as objects from a possible 537. plFiberPlate : 23 possible sky positions to use as objects from a possible 536. plFiberPlate : 11 possible sky positions to use as objects from a possible 535. plFiberPlate : 4 possible sky positions to use as objects from a possible 534. plFiberPlate : 17 possible sky positions to use as objects from a possible 533. plFiberPlate : 32 possible sky positions to use as objects from a possible 532. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2285.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2286.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2286.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2287.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 118 2 8 98 3 11 90 4 14 103 5 15 115 6 12 105 7 11 98 8 15 113 9 9 108 10 14 135 11 6 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5045 40 5 178 65 plFiberPlate : adding spectro-photo std with objId = 5038 40 5 75 170 plFiberPlate : adding spectro-photo std with objId = 5045 40 2 172 51 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 161 91 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 169 67 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 177 50 plFiberPlate : adding spectro-photo std with objId = 5045 40 3 172 54 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 89 15 plFiberPlate : 113 possible sky positions to use as objects from a possible 598. plFiberPlate : 66 possible sky positions to use as objects from a possible 597. plFiberPlate : 45 possible sky positions to use as objects from a possible 596. plFiberPlate : 29 possible sky positions to use as objects from a possible 595. plFiberPlate : 24 possible sky positions to use as objects from a possible 594. plFiberPlate : 45 possible sky positions to use as objects from a possible 593. plFiberPlate : 31 possible sky positions to use as objects from a possible 592. plFiberPlate : 70 possible sky positions to use as objects from a possible 591. plFiberPlate : 44 possible sky positions to use as objects from a possible 590. plFiberPlate : 31 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 9 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 12 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 29 possible sky positions to use as objects from a possible 583. plFiberPlate : 64 possible sky positions to use as objects from a possible 582. plFiberPlate : 53 possible sky positions to use as objects from a possible 581. plFiberPlate : 32 possible sky positions to use as objects from a possible 580. plFiberPlate : 21 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 13 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 14 possible sky positions to use as objects from a possible 575. plFiberPlate : 29 possible sky positions to use as objects from a possible 574. plFiberPlate : 54 possible sky positions to use as objects from a possible 573. plFiberPlate : 53 possible sky positions to use as objects from a possible 572. plFiberPlate : 28 possible sky positions to use as objects from a possible 571. plFiberPlate : 18 possible sky positions to use as objects from a possible 570. plFiberPlate : 14 possible sky positions to use as objects from a possible 569. plFiberPlate : 19 possible sky positions to use as objects from a possible 568. plFiberPlate : 38 possible sky positions to use as objects from a possible 567. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 680 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2286.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2287.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2287.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.09.1/plPlugMapP-2288.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 99 2 12 86 3 9 97 4 15 109 5 23 107 6 18 91 7 15 92 8 18 113 9 18 99 10 16 126 11 11 82 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 202 26 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 172 38 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 170 76 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 193 108 plFiberPlate : adding spectro-photo std with objId = 5080 41 4 183 37 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 205 118 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 160 81 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 168 26 plFiberPlate : 106 possible sky positions to use as objects from a possible 566. plFiberPlate : 80 possible sky positions to use as objects from a possible 565. plFiberPlate : 43 possible sky positions to use as objects from a possible 564. plFiberPlate : 21 possible sky positions to use as objects from a possible 563. plFiberPlate : 26 possible sky positions to use as objects from a possible 562. plFiberPlate : 31 possible sky positions to use as objects from a possible 561. plFiberPlate : 34 possible sky positions to use as objects from a possible 560. plFiberPlate : 81 possible sky positions to use as objects from a possible 559. plFiberPlate : 66 possible sky positions to use as objects from a possible 558. plFiberPlate : 30 possible sky positions to use as objects from a possible 557. plFiberPlate : 5 possible sky positions to use as objects from a possible 556. plFiberPlate : 5 possible sky positions to use as objects from a possible 555. plFiberPlate : 6 possible sky positions to use as objects from a possible 554. plFiberPlate : 9 possible sky positions to use as objects from a possible 553. plFiberPlate : 10 possible sky positions to use as objects from a possible 552. plFiberPlate : 36 possible sky positions to use as objects from a possible 551. plFiberPlate : 82 possible sky positions to use as objects from a possible 550. plFiberPlate : 56 possible sky positions to use as objects from a possible 549. plFiberPlate : 41 possible sky positions to use as objects from a possible 548. plFiberPlate : 19 possible sky positions to use as objects from a possible 547. plFiberPlate : 13 possible sky positions to use as objects from a possible 546. plFiberPlate : 6 possible sky positions to use as objects from a possible 545. plFiberPlate : 5 possible sky positions to use as objects from a possible 544. plFiberPlate : 21 possible sky positions to use as objects from a possible 543. plFiberPlate : 27 possible sky positions to use as objects from a possible 542. plFiberPlate : 61 possible sky positions to use as objects from a possible 541. plFiberPlate : 48 possible sky positions to use as objects from a possible 540. plFiberPlate : 35 possible sky positions to use as objects from a possible 539. plFiberPlate : 18 possible sky positions to use as objects from a possible 538. plFiberPlate : 18 possible sky positions to use as objects from a possible 537. plFiberPlate : 17 possible sky positions to use as objects from a possible 536. plFiberPlate : 47 possible sky positions to use as objects from a possible 535. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2287.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2288.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.09.1/plOverlay-2288.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Mon Sep 12 21:48:10 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 25 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 18 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2264.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2264.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2264.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 23 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2265.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.2414,7.5012) and (-11.07,5.80) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2265.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2265.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 18 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2266.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2266.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2266.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2267.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2267.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2267.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 23 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2268.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2268.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2268.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2269.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2269.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2269.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2270.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2270.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2270.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 14 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2271.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (2.3152,-12.2731) and (-0.18,-12.76) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2271.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2271.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2272.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2272.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2272.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 16 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2273.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2273.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.6978,9.0894) and (11.49,5.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2273.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2274.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.9070,4.1604) and (12.32,3.29) plMakeFanucCodes : fixed path between (-12.2960,-2.2086) and (-12.75,-0.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2274.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2274.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2275.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.7011,6.9068) and (11.14,5.85) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2275.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2275.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2276.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2276.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2276.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 40 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2277.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.4072,-3.1125) and (-12.78,-0.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2277.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2277.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2278.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2278.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2278.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 17 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2279.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0944,6.1778) and (11.76,4.33) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2279.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2279.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2280.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2280.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2280.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 19 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2281.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.9452,-12.0270) and (-2.30,-12.52) plMakeFanucCodes : fixed path between (11.9324,-4.2462) and (12.31,-2.94) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2281.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-8.9143,-8.4913) and (-3.91,-11.63) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2281.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2282.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2282.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2282.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2283.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2283.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2283.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2284.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.1161,-9.8984) and (6.27,-10.65) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2284.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2284.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2285.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9719,-5.8545) and (-12.19,-2.80) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2285.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2285.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2286.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.1078,-11.2247) and (-5.11,-11.60) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2286.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2286.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 18 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2287.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2287.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.3804,5.4650) and (12.30,0.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2287.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2288.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.3074,-11.0580) and (-5.67,-11.42) plMakeFanucCodes : fixed path between (10.1794,-7.5216) and (11.20,-5.33) plMakeFanucCodes : fixed path between (3.6562,12.2207) and (1.72,12.68) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2288.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.09.1/plFanuc-2288.par plMakeFanucCodes : temperature difference 21.9 deg C plMakeFanucCodes : using a temp expansion factor of 0.00046516 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (7.4859,9.3329) and (-2.72,11.98) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : done --------------------------------------------------------------- Mon Sep 12 21:49:16 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x9f81154 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 25 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2264 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2265 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 685 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2266 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2267 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2268 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 685 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2269 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2270 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2271 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 676 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2272 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2273 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 678 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2274 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2275 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2276 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2277 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 702 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2278 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2279 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 679 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2280 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2281 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 681 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2282 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2283 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2284 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2285 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2286 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2287 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 680 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2288 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -1.9 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Mon Sep 12 21:49:39 CDT 2005 Begin running "plateEnder dr2005.09.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_22/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_22/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.09.1 -morePipes 1" failed. PS: Read file for stderr output of this job.