Sender: LSF System Subject: Job 65235: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Wed Oct 19 17:13:27 2005 Results reported at Wed Oct 19 17:14:48 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.10.4 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 39.52 sec. Max Memory : 11 MB Max Swap : 29 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Wed Oct 19 17:13:36 CDT 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Wed Oct 19 17:13:53 CDT 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_87/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Wed Oct 19 17:13:53 CDT 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_87/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Wed Oct 19 17:13:54 CDT 2005 Begin running plate --------------------------------------------------------------- Wed Oct 19 17:13:54 CDT 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x9c58894 makePlates : beginning loop over plObs chain; makePlates : making 3 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.4/plPlugMapT-8124.par makePlates : plateInfo struct for plate 2338 : (h4).mjd 53689 (h4).raCen 298.4421 (h4).decCen 19.07833 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 298.442 19.078 298.442 20.578 plMakePlateFromTile : mjd of obs : 53689.383681 Observed HA/dec of plate center, fiducial point (deg) : 0.000 19.099 0.001 20.598 The rotation angle of the fid. point is -0.032054 plMakePlateFromTile : beginning loop over 1656 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.4/plPlugMapT-8125.par makePlates : plateInfo struct for plate 2339 : (h4).mjd 53689 (h4).raCen 51.245 (h4).decCen 5.202 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 51.245 5.202 51.245 6.702 plMakePlateFromTile : mjd of obs : 53689.696217 Observed HA/dec of plate center, fiducial point (deg) : -0.002 5.234 -0.003 6.734 The rotation angle of the fid. point is 0.028655 plMakePlateFromTile : beginning loop over 1590 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2005.10.4/plPlugMapT-8126.par makePlates : plateInfo struct for plate 2340 : (h4).mjd 53689 (h4).raCen 48.2456 (h4).decCen 5.4778 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 0 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 48.246 5.478 48.246 6.978 plMakePlateFromTile : mjd of obs : 53689.687908 Observed HA/dec of plate center, fiducial point (deg) : -0.002 5.511 -0.003 7.011 The rotation angle of the fid. point is 0.027542 plMakePlateFromTile : beginning loop over 1565 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Wed Oct 19 17:14:06 CDT 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 3 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.4/plPlugMapP-2338.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 478 to list of science objects plFiberPlate : adding sky number 224 to list of science objects plFiberPlate : adding sky number 444 to list of science objects plFiberPlate : adding sky number 452 to list of science objects plFiberPlate : adding sky number 515 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 189 to list of science objects plFiberPlate : adding sky number 432 to list of science objects plFiberPlate : adding sky number 156 to list of science objects plFiberPlate : adding sky number 310 to list of science objects plFiberPlate : adding sky number 267 to list of science objects plFiberPlate : adding sky number 351 to list of science objects plFiberPlate : adding sky number 203 to list of science objects plFiberPlate : adding sky number 285 to list of science objects plFiberPlate : adding sky number 529 to list of science objects plFiberPlate : adding sky number 508 to list of science objects plFiberPlate : adding sky number 352 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 78 to list of science objects plFiberPlate : adding sky number 334 to list of science objects plFiberPlate : adding sky number 8 to list of science objects plFiberPlate : adding sky number 133 to list of science objects plFiberPlate : adding sky number 75 to list of science objects plFiberPlate : adding sky number 439 to list of science objects plFiberPlate : adding sky number 85 to list of science objects plFiberPlate : adding sky number 218 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 59 to list of science objects plFiberPlate : adding sky number 541 to list of science objects plFiberPlate : adding sky number 118 to list of science objects plFiberPlate : adding sky number 276 to list of science objects plFiberPlate : adding sky number 452 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 56 111 2 69 82 3 35 81 4 17 101 5 12 123 6 37 94 7 50 78 8 33 96 9 63 99 10 98 134 11 80 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 682 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 584 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 336 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 331 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 275 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 235 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 100 plFiberPlate : adding spectro-photo std with objId = 0 0 4 0 32 plFiberPlate : 121 possible sky positions to use as objects from a possible 538. plFiberPlate : 86 possible sky positions to use as objects from a possible 537. plFiberPlate : 60 possible sky positions to use as objects from a possible 536. plFiberPlate : 28 possible sky positions to use as objects from a possible 535. plFiberPlate : 11 possible sky positions to use as objects from a possible 534. plFiberPlate : 40 possible sky positions to use as objects from a possible 533. plFiberPlate : 54 possible sky positions to use as objects from a possible 532. plFiberPlate : 57 possible sky positions to use as objects from a possible 531. plFiberPlate : 37 possible sky positions to use as objects from a possible 530. plFiberPlate : 8 possible sky positions to use as objects from a possible 529. plFiberPlate : 2 possible sky positions to use as objects from a possible 528. plFiberPlate : 1 possible sky positions to use as objects from a possible 527. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 40 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 50 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 60 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 70 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 80 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 90 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 100 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 526. plFiberPlate: No sky found for bundle at 11.172 -66.260, increase box by 110 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 526. plFiberPlate : 0 possible sky positions to use as objects from a possible 525. plFiberPlate: No sky found for bundle at 21.965 -66.182, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 525. plFiberPlate: No sky found for bundle at 21.965 -66.182, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 525. plFiberPlate: No sky found for bundle at 21.965 -66.182, increase box by 30 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 525. plFiberPlate: No sky found for bundle at 21.965 -66.182, increase box by 40 percent. plFiberPlate : 2 possible sky positions to use as objects from a possible 525. plFiberPlate : 16 possible sky positions to use as objects from a possible 524. plFiberPlate : 21 possible sky positions to use as objects from a possible 523. plFiberPlate : 59 possible sky positions to use as objects from a possible 522. plFiberPlate : 55 possible sky positions to use as objects from a possible 521. plFiberPlate : 45 possible sky positions to use as objects from a possible 520. plFiberPlate : 17 possible sky positions to use as objects from a possible 519. plFiberPlate : 9 possible sky positions to use as objects from a possible 518. plFiberPlate : 3 possible sky positions to use as objects from a possible 517. plFiberPlate : 25 possible sky positions to use as objects from a possible 516. plFiberPlate : 23 possible sky positions to use as objects from a possible 515. plFiberPlate : 17 possible sky positions to use as objects from a possible 514. plFiberPlate : 59 possible sky positions to use as objects from a possible 513. plFiberPlate : 47 possible sky positions to use as objects from a possible 512. plFiberPlate : 24 possible sky positions to use as objects from a possible 511. plFiberPlate : 15 possible sky positions to use as objects from a possible 510. plFiberPlate : 21 possible sky positions to use as objects from a possible 509. plFiberPlate : 16 possible sky positions to use as objects from a possible 508. plFiberPlate : 18 possible sky positions to use as objects from a possible 507. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 904 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2338.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2338.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.4/plPlugMapP-2339.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 514 to list of science objects plFiberPlate : adding sky number 248 to list of science objects plFiberPlate : adding sky number 533 to list of science objects plFiberPlate : adding sky number 438 to list of science objects plFiberPlate : adding sky number 412 to list of science objects plFiberPlate : adding sky number 811 to list of science objects plFiberPlate : adding sky number 243 to list of science objects plFiberPlate : adding sky number 641 to list of science objects plFiberPlate : adding sky number 437 to list of science objects plFiberPlate : adding sky number 639 to list of science objects plFiberPlate : adding sky number 331 to list of science objects plFiberPlate : adding sky number 738 to list of science objects plFiberPlate : adding sky number 234 to list of science objects plFiberPlate : adding sky number 291 to list of science objects plFiberPlate : adding sky number 666 to list of science objects plFiberPlate : adding sky number 757 to list of science objects plFiberPlate : adding sky number 57 to list of science objects plFiberPlate : adding sky number 780 to list of science objects plFiberPlate : adding sky number 431 to list of science objects plFiberPlate : adding sky number 70 to list of science objects plFiberPlate : adding sky number 157 to list of science objects plFiberPlate : adding sky number 542 to list of science objects plFiberPlate : adding sky number 727 to list of science objects plFiberPlate : adding sky number 284 to list of science objects plFiberPlate : adding sky number 52 to list of science objects plFiberPlate : adding sky number 16 to list of science objects plFiberPlate : adding sky number 372 to list of science objects plFiberPlate : adding sky number 51 to list of science objects plFiberPlate : adding sky number 193 to list of science objects plFiberPlate : adding sky number 786 to list of science objects plFiberPlate : adding sky number 729 to list of science objects plFiberPlate : adding sky number 687 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 174 2 11 129 3 10 108 4 19 145 5 15 171 6 9 114 7 12 111 8 12 159 9 13 165 10 29 221 11 20 161 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 221 20 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 218 55 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 213 31 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 209 35 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 209 24 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 208 41 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 207 12 plFiberPlate : adding spectro-photo std with objId = 5065 40 4 206 4 plFiberPlate : 172 possible sky positions to use as objects from a possible 807. plFiberPlate : 120 possible sky positions to use as objects from a possible 806. plFiberPlate : 73 possible sky positions to use as objects from a possible 805. plFiberPlate : 39 possible sky positions to use as objects from a possible 804. plFiberPlate : 56 possible sky positions to use as objects from a possible 803. plFiberPlate : 60 possible sky positions to use as objects from a possible 802. plFiberPlate : 53 possible sky positions to use as objects from a possible 801. plFiberPlate : 102 possible sky positions to use as objects from a possible 800. plFiberPlate : 80 possible sky positions to use as objects from a possible 799. plFiberPlate : 46 possible sky positions to use as objects from a possible 798. plFiberPlate : 34 possible sky positions to use as objects from a possible 797. plFiberPlate : 22 possible sky positions to use as objects from a possible 796. plFiberPlate : 18 possible sky positions to use as objects from a possible 795. plFiberPlate : 15 possible sky positions to use as objects from a possible 794. plFiberPlate : 19 possible sky positions to use as objects from a possible 793. plFiberPlate : 32 possible sky positions to use as objects from a possible 792. plFiberPlate : 106 possible sky positions to use as objects from a possible 791. plFiberPlate : 71 possible sky positions to use as objects from a possible 790. plFiberPlate : 50 possible sky positions to use as objects from a possible 789. plFiberPlate : 33 possible sky positions to use as objects from a possible 788. plFiberPlate : 21 possible sky positions to use as objects from a possible 787. plFiberPlate : 18 possible sky positions to use as objects from a possible 786. plFiberPlate : 14 possible sky positions to use as objects from a possible 785. plFiberPlate : 18 possible sky positions to use as objects from a possible 784. plFiberPlate : 17 possible sky positions to use as objects from a possible 783. plFiberPlate : 53 possible sky positions to use as objects from a possible 782. plFiberPlate : 50 possible sky positions to use as objects from a possible 781. plFiberPlate : 37 possible sky positions to use as objects from a possible 780. plFiberPlate : 25 possible sky positions to use as objects from a possible 779. plFiberPlate : 19 possible sky positions to use as objects from a possible 778. plFiberPlate : 14 possible sky positions to use as objects from a possible 777. plFiberPlate : 31 possible sky positions to use as objects from a possible 776. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 703 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2338.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2339.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2339.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.10.4/plPlugMapP-2340.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 227 to list of science objects plFiberPlate : adding sky number 459 to list of science objects plFiberPlate : adding sky number 319 to list of science objects plFiberPlate : adding sky number 646 to list of science objects plFiberPlate : adding sky number 435 to list of science objects plFiberPlate : adding sky number 566 to list of science objects plFiberPlate : adding sky number 450 to list of science objects plFiberPlate : adding sky number 33 to list of science objects plFiberPlate : adding sky number 369 to list of science objects plFiberPlate : adding sky number 786 to list of science objects plFiberPlate : adding sky number 784 to list of science objects plFiberPlate : adding sky number 607 to list of science objects plFiberPlate : adding sky number 239 to list of science objects plFiberPlate : adding sky number 620 to list of science objects plFiberPlate : adding sky number 536 to list of science objects plFiberPlate : adding sky number 296 to list of science objects plFiberPlate : adding sky number 575 to list of science objects plFiberPlate : adding sky number 138 to list of science objects plFiberPlate : adding sky number 367 to list of science objects plFiberPlate : adding sky number 733 to list of science objects plFiberPlate : adding sky number 690 to list of science objects plFiberPlate : adding sky number 274 to list of science objects plFiberPlate : adding sky number 190 to list of science objects plFiberPlate : adding sky number 741 to list of science objects plFiberPlate : adding sky number 290 to list of science objects plFiberPlate : adding sky number 568 to list of science objects plFiberPlate : adding sky number 790 to list of science objects plFiberPlate : adding sky number 486 to list of science objects plFiberPlate : adding sky number 542 to list of science objects plFiberPlate : adding sky number 707 to list of science objects plFiberPlate : adding sky number 361 to list of science objects plFiberPlate : adding sky number 759 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 25 173 2 16 117 3 9 114 4 11 154 5 15 174 6 5 113 7 5 116 8 16 166 9 8 167 10 25 216 11 27 162 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 195 29 plFiberPlate : adding spectro-photo std with objId = 5065 40 2 192 67 plFiberPlate : adding spectro-photo std with objId = 5065 40 1 192 72 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 190 100 plFiberPlate : adding spectro-photo std with objId = 5065 40 5 189 88 plFiberPlate : adding spectro-photo std with objId = 5065 40 6 188 82 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 188 62 plFiberPlate : adding spectro-photo std with objId = 5065 40 3 187 11 plFiberPlate : 164 possible sky positions to use as objects from a possible 821. plFiberPlate : 113 possible sky positions to use as objects from a possible 820. plFiberPlate : 65 possible sky positions to use as objects from a possible 819. plFiberPlate : 49 possible sky positions to use as objects from a possible 818. plFiberPlate : 16 possible sky positions to use as objects from a possible 817. plFiberPlate : 46 possible sky positions to use as objects from a possible 816. plFiberPlate : 70 possible sky positions to use as objects from a possible 815. plFiberPlate : 109 possible sky positions to use as objects from a possible 814. plFiberPlate : 81 possible sky positions to use as objects from a possible 813. plFiberPlate : 58 possible sky positions to use as objects from a possible 812. plFiberPlate : 45 possible sky positions to use as objects from a possible 811. plFiberPlate : 38 possible sky positions to use as objects from a possible 810. plFiberPlate : 18 possible sky positions to use as objects from a possible 809. plFiberPlate : 23 possible sky positions to use as objects from a possible 808. plFiberPlate : 17 possible sky positions to use as objects from a possible 807. plFiberPlate : 17 possible sky positions to use as objects from a possible 806. plFiberPlate : 113 possible sky positions to use as objects from a possible 805. plFiberPlate : 85 possible sky positions to use as objects from a possible 804. plFiberPlate : 57 possible sky positions to use as objects from a possible 803. plFiberPlate : 36 possible sky positions to use as objects from a possible 802. plFiberPlate : 17 possible sky positions to use as objects from a possible 801. plFiberPlate : 12 possible sky positions to use as objects from a possible 800. plFiberPlate : 22 possible sky positions to use as objects from a possible 799. plFiberPlate : 23 possible sky positions to use as objects from a possible 798. plFiberPlate : 34 possible sky positions to use as objects from a possible 797. plFiberPlate : 71 possible sky positions to use as objects from a possible 796. plFiberPlate : 66 possible sky positions to use as objects from a possible 795. plFiberPlate : 37 possible sky positions to use as objects from a possible 794. plFiberPlate : 17 possible sky positions to use as objects from a possible 793. plFiberPlate : 23 possible sky positions to use as objects from a possible 792. plFiberPlate : 35 possible sky positions to use as objects from a possible 791. plFiberPlate : 31 possible sky positions to use as objects from a possible 790. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 707 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2339.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2340.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.10.4/plOverlay-2340.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Wed Oct 19 17:14:16 CDT 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 3 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 242 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2338.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2338.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2338.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 41 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2339.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2339.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2339.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 45 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2340.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2340.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.10.4/plFanuc-2340.par plMakeFanucCodes : temperature difference 20.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00042480 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Wed Oct 19 17:14:27 CDT 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0x996066c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 3 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2338 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 904 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2339 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 703 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2340 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 0 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 707 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Wed Oct 19 17:14:33 CDT 2005 Begin running "plateEnder dr2005.10.4 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_87/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_87/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.10.4 -morePipes 1" failed. PS: Read file for stderr output of this job.