Sender: LSF System Subject: Job 72226: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Thu Nov 10 15:30:57 2005 Results reported at Thu Nov 10 15:36:59 2005 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2005.11.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 246.29 sec. Max Memory : 12 MB Max Swap : 30 MB Max Processes : 4 The output (if any) follows: --------------------------------------------------------------- Thu Nov 10 15:31:10 CST 2005 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Thu Nov 10 15:31:40 CST 2005 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp9.a/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_129/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Thu Nov 10 15:31:41 CST 2005 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_129/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp9.a/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Thu Nov 10 15:31:41 CST 2005 Begin running plate --------------------------------------------------------------- Thu Nov 10 15:31:42 CST 2005 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_129/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_129/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0xabca374 makePlates : beginning loop over plObs chain; makePlates : making 19 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1667.par makePlates : plateInfo struct for plate 2341 : (h4).mjd 53770 (h4).raCen 147.6975 (h4).decCen 24.87039 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 147.697 24.870 147.697 26.370 plMakePlateFromTile : mjd of obs : 53770.667456 Observed HA/dec of plate center, fiducial point (deg) : -27.002 24.844 -27.003 26.344 The rotation angle of the fid. point is 65.200154 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1668.par makePlates : plateInfo struct for plate 2342 : (h4).mjd 53770 (h4).raCen 148.1205 (h4).decCen 27.32039 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 148.120 27.320 148.120 28.820 plMakePlateFromTile : mjd of obs : 53770.665859 Observed HA/dec of plate center, fiducial point (deg) : -28.002 27.293 -28.003 28.793 The rotation angle of the fid. point is 70.399252 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1669.par makePlates : plateInfo struct for plate 2343 : (h4).mjd 53770 (h4).raCen 151.9739 (h4).decCen 23.64273 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 151.974 23.643 151.974 25.143 plMakePlateFromTile : mjd of obs : 53770.751344 Observed HA/dec of plate center, fiducial point (deg) : -1.002 23.615 -1.003 25.114 The rotation angle of the fid. point is 5.296381 plMakePlateFromTile : beginning loop over 1317 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1670.par makePlates : plateInfo struct for plate 2344 : (h4).mjd 53770 (h4).raCen 150.0937 (h4).decCen 25.55829 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.094 25.558 150.094 27.058 plMakePlateFromTile : mjd of obs : 53770.665780 Observed HA/dec of plate center, fiducial point (deg) : -30.002 25.531 -30.003 27.031 The rotation angle of the fid. point is 67.452836 plMakePlateFromTile : beginning loop over 1359 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1671.par makePlates : plateInfo struct for plate 2345 : (h4).mjd 53770 (h4).raCen 150.5522 (h4).decCen 27.91504 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.552 27.915 150.552 29.415 plMakePlateFromTile : mjd of obs : 53770.750183 Observed HA/dec of plate center, fiducial point (deg) : -0.002 27.886 -0.003 29.386 The rotation angle of the fid. point is 0.048009 plMakePlateFromTile : beginning loop over 1318 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1672.par makePlates : plateInfo struct for plate 2346 : (h4).mjd 53770 (h4).raCen 154.2299 (h4).decCen 24.13517 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.230 24.135 154.230 25.635 plMakePlateFromTile : mjd of obs : 53770.749279 Observed HA/dec of plate center, fiducial point (deg) : -4.002 24.106 -4.003 25.606 The rotation angle of the fid. point is 21.176282 plMakePlateFromTile : beginning loop over 1316 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1673.par makePlates : plateInfo struct for plate 2347 : (h4).mjd 53770 (h4).raCen 152.4587 (h4).decCen 26.14678 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.459 26.147 152.459 27.647 plMakePlateFromTile : mjd of obs : 53770.749918 Observed HA/dec of plate center, fiducial point (deg) : -2.002 26.118 -2.003 27.617 The rotation angle of the fid. point is 14.205796 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1674.par makePlates : plateInfo struct for plate 2348 : (h4).mjd 53770 (h4).raCen 152.8493 (h4).decCen 28.67369 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.849 28.674 152.849 30.174 plMakePlateFromTile : mjd of obs : 53770.751003 Observed HA/dec of plate center, fiducial point (deg) : -2.002 28.644 -2.003 30.143 The rotation angle of the fid. point is 22.115959 plMakePlateFromTile : beginning loop over 1339 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1675.par makePlates : plateInfo struct for plate 2349 : (h4).mjd 53770 (h4).raCen 156.6858 (h4).decCen 24.55067 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 156.686 24.551 156.686 26.051 plMakePlateFromTile : mjd of obs : 53770.789333 Observed HA/dec of plate center, fiducial point (deg) : 7.998 24.521 7.997 26.020 The rotation angle of the fid. point is -38.482736 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1676.par makePlates : plateInfo struct for plate 2350 : (h4).mjd 53770 (h4).raCen 154.8555 (h4).decCen 26.75936 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 154.856 26.759 154.856 28.259 plMakePlateFromTile : mjd of obs : 53770.751015 Observed HA/dec of plate center, fiducial point (deg) : -4.002 26.729 -4.003 28.229 The rotation angle of the fid. point is 28.915742 plMakePlateFromTile : beginning loop over 1315 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1677.par makePlates : plateInfo struct for plate 2351 : (h4).mjd 53770 (h4).raCen 155.3263 (h4).decCen 29.34853 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 155.326 29.349 155.326 30.849 plMakePlateFromTile : mjd of obs : 53770.749551 Observed HA/dec of plate center, fiducial point (deg) : -5.002 29.317 -5.003 30.817 The rotation angle of the fid. point is 49.817940 plMakePlateFromTile : beginning loop over 1345 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1678.par makePlates : plateInfo struct for plate 2352 : (h4).mjd 53770 (h4).raCen 159.0085 (h4).decCen 24.98818 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.008 24.988 159.008 26.488 plMakePlateFromTile : mjd of obs : 53770.787453 Observed HA/dec of plate center, fiducial point (deg) : 4.998 24.957 4.997 26.457 The rotation angle of the fid. point is -28.032209 plMakePlateFromTile : beginning loop over 1333 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1679.par makePlates : plateInfo struct for plate 2353 : (h4).mjd 53770 (h4).raCen 157.1909 (h4).decCen 27.28306 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.191 27.283 157.191 28.783 plMakePlateFromTile : mjd of obs : 53770.787964 Observed HA/dec of plate center, fiducial point (deg) : 6.998 27.252 6.997 28.752 The rotation angle of the fid. point is -45.897708 plMakePlateFromTile : beginning loop over 1324 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1680.par makePlates : plateInfo struct for plate 2354 : (h4).mjd 53770 (h4).raCen 157.733 (h4).decCen 29.81087 (h4).haCen 7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 157.733 29.811 157.733 31.311 plMakePlateFromTile : mjd of obs : 53770.789468 Observed HA/dec of plate center, fiducial point (deg) : 6.998 29.779 6.997 31.278 The rotation angle of the fid. point is -61.544314 plMakePlateFromTile : beginning loop over 1330 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1681.par makePlates : plateInfo struct for plate 2355 : (h4).mjd 53770 (h4).raCen 161.5585 (h4).decCen 25.29212 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.559 25.292 161.559 26.792 plMakePlateFromTile : mjd of obs : 53770.788973 Observed HA/dec of plate center, fiducial point (deg) : 2.998 25.260 2.997 26.760 The rotation angle of the fid. point is -18.489510 plMakePlateFromTile : beginning loop over 1346 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1682.par makePlates : plateInfo struct for plate 2356 : (h4).mjd 53770 (h4).raCen 159.6326 (h4).decCen 27.62047 (h4).haCen 5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 159.633 27.620 159.633 29.120 plMakePlateFromTile : mjd of obs : 53770.789184 Observed HA/dec of plate center, fiducial point (deg) : 4.998 27.589 4.997 29.088 The rotation angle of the fid. point is -38.516588 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1683.par makePlates : plateInfo struct for plate 2357 : (h4).mjd 53770 (h4).raCen 164.1416 (h4).decCen 25.80652 (h4).haCen 30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 164.142 25.807 164.142 27.307 plMakePlateFromTile : mjd of obs : 53770.870945 Observed HA/dec of plate center, fiducial point (deg) : 29.998 25.775 29.997 27.275 The rotation angle of the fid. point is -67.854599 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-47.19, -230.13, 4.5) and (-46.80, -230.28, 6.3) checkLTHo : distance = 0.424, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-46.80, -230.28, 6.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1684.par makePlates : plateInfo struct for plate 2358 : (h4).mjd 53770 (h4).raCen 161.784 (h4).decCen 27.84416 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.784 27.844 161.784 29.344 plMakePlateFromTile : mjd of obs : 53770.789600 Observed HA/dec of plate center, fiducial point (deg) : 2.998 27.812 2.997 29.311 The rotation angle of the fid. point is -26.755834 plMakePlateFromTile : beginning loop over 1320 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk123/complete//plPlugMapT-1685.par makePlates : plateInfo struct for plate 2359 : (h4).mjd 53770 (h4).raCen 163.8984 (h4).decCen 28.27497 (h4).haCen 1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.898 28.275 163.898 29.775 plMakePlateFromTile : mjd of obs : 53770.789914 Observed HA/dec of plate center, fiducial point (deg) : 0.998 28.242 0.997 29.741 The rotation angle of the fid. point is -10.457541 plMakePlateFromTile : beginning loop over 1314 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Thu Nov 10 15:32:37 CST 2005 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_129/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_129/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 19 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2341.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 108 2 8 92 3 11 100 4 13 118 5 13 120 6 10 96 7 8 99 8 9 108 9 6 111 10 16 150 11 12 95 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 225 134 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 233 102 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 234 19 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 225 127 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 231 35 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 215 162 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 227 85 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 217 37 plFiberPlate : 141 possible sky positions to use as objects from a possible 604. plFiberPlate : 78 possible sky positions to use as objects from a possible 603. plFiberPlate : 59 possible sky positions to use as objects from a possible 602. plFiberPlate : 34 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 21 possible sky positions to use as objects from a possible 599. plFiberPlate : 53 possible sky positions to use as objects from a possible 598. plFiberPlate : 87 possible sky positions to use as objects from a possible 597. plFiberPlate : 55 possible sky positions to use as objects from a possible 596. plFiberPlate : 34 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : 15 possible sky positions to use as objects from a possible 593. plFiberPlate : 3 possible sky positions to use as objects from a possible 592. plFiberPlate : 4 possible sky positions to use as objects from a possible 591. plFiberPlate : 5 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 53 possible sky positions to use as objects from a possible 588. plFiberPlate : 39 possible sky positions to use as objects from a possible 587. plFiberPlate : 29 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 9 possible sky positions to use as objects from a possible 582. plFiberPlate : 13 possible sky positions to use as objects from a possible 581. plFiberPlate : 18 possible sky positions to use as objects from a possible 580. plFiberPlate : 51 possible sky positions to use as objects from a possible 579. plFiberPlate : 49 possible sky positions to use as objects from a possible 578. plFiberPlate : 38 possible sky positions to use as objects from a possible 577. plFiberPlate : 12 possible sky positions to use as objects from a possible 576. plFiberPlate : 20 possible sky positions to use as objects from a possible 575. plFiberPlate : 24 possible sky positions to use as objects from a possible 574. plFiberPlate : 13 possible sky positions to use as objects from a possible 573. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2341.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2341.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2342.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 121 2 11 91 3 10 82 4 13 92 5 15 125 6 18 120 7 12 100 8 15 104 9 14 119 10 16 127 11 12 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 143 93 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 151 4 plFiberPlate : adding spectro-photo std with objId = 5038 40 5 144 48 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 60 18 plFiberPlate : adding spectro-photo std with objId = 5038 40 2 141 74 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 55 68 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 49 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 53 27 plFiberPlate : 120 possible sky positions to use as objects from a possible 608. plFiberPlate : 51 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 31 possible sky positions to use as objects from a possible 605. plFiberPlate : 20 possible sky positions to use as objects from a possible 604. plFiberPlate : 16 possible sky positions to use as objects from a possible 603. plFiberPlate : 52 possible sky positions to use as objects from a possible 602. plFiberPlate : 73 possible sky positions to use as objects from a possible 601. plFiberPlate : 52 possible sky positions to use as objects from a possible 600. plFiberPlate : 27 possible sky positions to use as objects from a possible 599. plFiberPlate : 13 possible sky positions to use as objects from a possible 598. plFiberPlate : 16 possible sky positions to use as objects from a possible 597. plFiberPlate : 11 possible sky positions to use as objects from a possible 596. plFiberPlate : 14 possible sky positions to use as objects from a possible 595. plFiberPlate : 11 possible sky positions to use as objects from a possible 594. plFiberPlate : 31 possible sky positions to use as objects from a possible 593. plFiberPlate : 44 possible sky positions to use as objects from a possible 592. plFiberPlate : 31 possible sky positions to use as objects from a possible 591. plFiberPlate : 27 possible sky positions to use as objects from a possible 590. plFiberPlate : 22 possible sky positions to use as objects from a possible 589. plFiberPlate : 17 possible sky positions to use as objects from a possible 588. plFiberPlate : 21 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 7 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : 103 possible sky positions to use as objects from a possible 583. plFiberPlate : 76 possible sky positions to use as objects from a possible 582. plFiberPlate : 28 possible sky positions to use as objects from a possible 581. plFiberPlate : 38 possible sky positions to use as objects from a possible 580. plFiberPlate : 19 possible sky positions to use as objects from a possible 579. plFiberPlate : 14 possible sky positions to use as objects from a possible 578. plFiberPlate : 5 possible sky positions to use as objects from a possible 577. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2341.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2342.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2342.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2343.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 111 2 5 104 3 7 95 4 12 106 5 8 106 6 8 89 7 9 85 8 8 100 9 8 110 10 8 153 11 6 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 280 52 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 286 6 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 260 6 plFiberPlate : adding spectro-photo std with objId = 5080 41 3 260 8 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 279 82 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 289 57 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 286 47 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 275 102 plFiberPlate : 119 possible sky positions to use as objects from a possible 602. plFiberPlate : 77 possible sky positions to use as objects from a possible 601. plFiberPlate : 60 possible sky positions to use as objects from a possible 600. plFiberPlate : 22 possible sky positions to use as objects from a possible 599. plFiberPlate : 37 possible sky positions to use as objects from a possible 598. plFiberPlate : 34 possible sky positions to use as objects from a possible 597. plFiberPlate : 36 possible sky positions to use as objects from a possible 596. plFiberPlate : 70 possible sky positions to use as objects from a possible 595. plFiberPlate : 42 possible sky positions to use as objects from a possible 594. plFiberPlate : 22 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : 16 possible sky positions to use as objects from a possible 591. plFiberPlate : 10 possible sky positions to use as objects from a possible 590. plFiberPlate : 6 possible sky positions to use as objects from a possible 589. plFiberPlate : 13 possible sky positions to use as objects from a possible 588. plFiberPlate : 17 possible sky positions to use as objects from a possible 587. plFiberPlate : 78 possible sky positions to use as objects from a possible 586. plFiberPlate : 56 possible sky positions to use as objects from a possible 585. plFiberPlate : 38 possible sky positions to use as objects from a possible 584. plFiberPlate : 23 possible sky positions to use as objects from a possible 583. plFiberPlate : 18 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 19 possible sky positions to use as objects from a possible 578. plFiberPlate : 35 possible sky positions to use as objects from a possible 577. plFiberPlate : 28 possible sky positions to use as objects from a possible 576. plFiberPlate : 31 possible sky positions to use as objects from a possible 575. plFiberPlate : 19 possible sky positions to use as objects from a possible 574. plFiberPlate : 20 possible sky positions to use as objects from a possible 573. plFiberPlate : 15 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2342.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2343.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2343.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2344.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 138 2 8 110 3 13 97 4 15 101 5 13 119 6 14 93 7 9 98 8 6 115 9 8 103 10 15 158 11 4 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 241 140 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 62 52 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 239 35 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 245 59 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 240 63 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 243 64 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 245 82 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 239 62 plFiberPlate : 120 possible sky positions to use as objects from a possible 625. plFiberPlate : 94 possible sky positions to use as objects from a possible 624. plFiberPlate : 69 possible sky positions to use as objects from a possible 623. plFiberPlate : 30 possible sky positions to use as objects from a possible 622. plFiberPlate : 25 possible sky positions to use as objects from a possible 621. plFiberPlate : 50 possible sky positions to use as objects from a possible 620. plFiberPlate : 51 possible sky positions to use as objects from a possible 619. plFiberPlate : 52 possible sky positions to use as objects from a possible 618. plFiberPlate : 40 possible sky positions to use as objects from a possible 617. plFiberPlate : 25 possible sky positions to use as objects from a possible 616. plFiberPlate : 10 possible sky positions to use as objects from a possible 615. plFiberPlate : 4 possible sky positions to use as objects from a possible 614. plFiberPlate : 8 possible sky positions to use as objects from a possible 613. plFiberPlate : 9 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 22 possible sky positions to use as objects from a possible 610. plFiberPlate : 36 possible sky positions to use as objects from a possible 609. plFiberPlate : 32 possible sky positions to use as objects from a possible 608. plFiberPlate : 21 possible sky positions to use as objects from a possible 607. plFiberPlate : 6 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 3 possible sky positions to use as objects from a possible 604. plFiberPlate : 8 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 49 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 31 possible sky positions to use as objects from a possible 596. plFiberPlate : 16 possible sky positions to use as objects from a possible 595. plFiberPlate : 37 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2343.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2344.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2344.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2345.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 115 2 14 98 3 10 91 4 17 103 5 17 123 6 13 103 7 6 88 8 11 103 9 6 108 10 18 147 11 11 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5038 40 5 172 99 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 74 139 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 60 18 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 62 52 plFiberPlate : adding spectro-photo std with objId = 4632 40 3 64 73 plFiberPlate : adding spectro-photo std with objId = 5038 40 5 163 43 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 165 8 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 64 20 plFiberPlate : 128 possible sky positions to use as objects from a possible 597. plFiberPlate : 69 possible sky positions to use as objects from a possible 596. plFiberPlate : 31 possible sky positions to use as objects from a possible 595. plFiberPlate : 27 possible sky positions to use as objects from a possible 594. plFiberPlate : 28 possible sky positions to use as objects from a possible 593. plFiberPlate : 62 possible sky positions to use as objects from a possible 592. plFiberPlate : 32 possible sky positions to use as objects from a possible 591. plFiberPlate : 61 possible sky positions to use as objects from a possible 590. plFiberPlate : 44 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 5 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 25 possible sky positions to use as objects from a possible 582. plFiberPlate : 53 possible sky positions to use as objects from a possible 581. plFiberPlate : 35 possible sky positions to use as objects from a possible 580. plFiberPlate : 30 possible sky positions to use as objects from a possible 579. plFiberPlate : 24 possible sky positions to use as objects from a possible 578. plFiberPlate : 8 possible sky positions to use as objects from a possible 577. plFiberPlate : 22 possible sky positions to use as objects from a possible 576. plFiberPlate : 16 possible sky positions to use as objects from a possible 575. plFiberPlate : 11 possible sky positions to use as objects from a possible 574. plFiberPlate : 22 possible sky positions to use as objects from a possible 573. plFiberPlate : 59 possible sky positions to use as objects from a possible 572. plFiberPlate : 35 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 13 possible sky positions to use as objects from a possible 569. plFiberPlate : 17 possible sky positions to use as objects from a possible 568. plFiberPlate : 9 possible sky positions to use as objects from a possible 567. plFiberPlate : 14 possible sky positions to use as objects from a possible 566. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2344.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2345.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2345.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2346.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 126 2 4 108 3 5 91 4 6 125 5 13 119 6 12 93 7 7 76 8 5 96 9 11 97 10 10 168 11 6 118 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 302 2 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 293 52 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 287 48 plFiberPlate : adding spectro-photo std with objId = 5080 41 5 267 35 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 276 50 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 286 47 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 289 99 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 289 57 plFiberPlate : 143 possible sky positions to use as objects from a possible 599. plFiberPlate : 67 possible sky positions to use as objects from a possible 598. plFiberPlate : 46 possible sky positions to use as objects from a possible 597. plFiberPlate : 29 possible sky positions to use as objects from a possible 596. plFiberPlate : 35 possible sky positions to use as objects from a possible 595. plFiberPlate : 60 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 80 possible sky positions to use as objects from a possible 592. plFiberPlate : 42 possible sky positions to use as objects from a possible 591. plFiberPlate : 10 possible sky positions to use as objects from a possible 590. plFiberPlate : 13 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 4 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 8 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : 61 possible sky positions to use as objects from a possible 583. plFiberPlate : 36 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 8 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 8 possible sky positions to use as objects from a possible 578. plFiberPlate : 15 possible sky positions to use as objects from a possible 577. plFiberPlate : 5 possible sky positions to use as objects from a possible 576. plFiberPlate : 14 possible sky positions to use as objects from a possible 575. plFiberPlate : 50 possible sky positions to use as objects from a possible 574. plFiberPlate : 31 possible sky positions to use as objects from a possible 573. plFiberPlate : 26 possible sky positions to use as objects from a possible 572. plFiberPlate : 10 possible sky positions to use as objects from a possible 571. plFiberPlate : 12 possible sky positions to use as objects from a possible 570. plFiberPlate : 10 possible sky positions to use as objects from a possible 569. plFiberPlate : 8 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2345.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2346.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2346.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2347.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 118 2 8 104 3 5 89 4 6 101 5 11 129 6 13 98 7 9 81 8 8 98 9 10 105 10 8 155 11 8 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 259 21 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 261 54 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 80 15 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 261 6 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 259 25 plFiberPlate : adding spectro-photo std with objId = 5061 40 5 261 56 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 259 14 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 245 82 plFiberPlate : 126 possible sky positions to use as objects from a possible 615. plFiberPlate : 62 possible sky positions to use as objects from a possible 614. plFiberPlate : 40 possible sky positions to use as objects from a possible 613. plFiberPlate : 37 possible sky positions to use as objects from a possible 612. plFiberPlate : 23 possible sky positions to use as objects from a possible 611. plFiberPlate : 24 possible sky positions to use as objects from a possible 610. plFiberPlate : 50 possible sky positions to use as objects from a possible 609. plFiberPlate : 65 possible sky positions to use as objects from a possible 608. plFiberPlate : 55 possible sky positions to use as objects from a possible 607. plFiberPlate : 38 possible sky positions to use as objects from a possible 606. plFiberPlate : 29 possible sky positions to use as objects from a possible 605. plFiberPlate : 19 possible sky positions to use as objects from a possible 604. plFiberPlate : 16 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 13 possible sky positions to use as objects from a possible 601. plFiberPlate : 25 possible sky positions to use as objects from a possible 600. plFiberPlate : 49 possible sky positions to use as objects from a possible 599. plFiberPlate : 48 possible sky positions to use as objects from a possible 598. plFiberPlate : 21 possible sky positions to use as objects from a possible 597. plFiberPlate : 11 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 10 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 9 possible sky positions to use as objects from a possible 591. plFiberPlate : 67 possible sky positions to use as objects from a possible 590. plFiberPlate : 49 possible sky positions to use as objects from a possible 589. plFiberPlate : 33 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 17 possible sky positions to use as objects from a possible 584. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2346.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2347.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2347.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2348.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 123 2 15 93 3 12 103 4 9 111 5 13 118 6 14 108 7 9 98 8 12 112 9 13 112 10 20 146 11 16 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4569 40 1 264 56 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 178 54 plFiberPlate : adding spectro-photo std with objId = 5038 40 6 172 29 plFiberPlate : adding spectro-photo std with objId = 5038 40 4 182 5 plFiberPlate : adding spectro-photo std with objId = 4632 40 3 85 72 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 80 15 plFiberPlate : adding spectro-photo std with objId = 5038 40 3 182 48 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 85 2 plFiberPlate : 139 possible sky positions to use as objects from a possible 613. plFiberPlate : 58 possible sky positions to use as objects from a possible 612. plFiberPlate : 35 possible sky positions to use as objects from a possible 611. plFiberPlate : 36 possible sky positions to use as objects from a possible 610. plFiberPlate : 11 possible sky positions to use as objects from a possible 609. plFiberPlate : 26 possible sky positions to use as objects from a possible 608. plFiberPlate : 44 possible sky positions to use as objects from a possible 607. plFiberPlate : 74 possible sky positions to use as objects from a possible 606. plFiberPlate : 59 possible sky positions to use as objects from a possible 605. plFiberPlate : 47 possible sky positions to use as objects from a possible 604. plFiberPlate : 18 possible sky positions to use as objects from a possible 603. plFiberPlate : 13 possible sky positions to use as objects from a possible 602. plFiberPlate : 9 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 35 possible sky positions to use as objects from a possible 598. plFiberPlate : 54 possible sky positions to use as objects from a possible 597. plFiberPlate : 41 possible sky positions to use as objects from a possible 596. plFiberPlate : 23 possible sky positions to use as objects from a possible 595. plFiberPlate : 18 possible sky positions to use as objects from a possible 594. plFiberPlate : 6 possible sky positions to use as objects from a possible 593. plFiberPlate : 9 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 7 possible sky positions to use as objects from a possible 590. plFiberPlate : 28 possible sky positions to use as objects from a possible 589. plFiberPlate : 73 possible sky positions to use as objects from a possible 588. plFiberPlate : 50 possible sky positions to use as objects from a possible 587. plFiberPlate : 46 possible sky positions to use as objects from a possible 586. plFiberPlate : 30 possible sky positions to use as objects from a possible 585. plFiberPlate : 18 possible sky positions to use as objects from a possible 584. plFiberPlate : 20 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2347.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2348.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2348.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2349.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 118 2 7 97 3 9 88 4 10 109 5 6 125 6 9 103 7 9 96 8 6 108 9 10 120 10 11 145 11 11 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5137 40 6 291 101 plFiberPlate : adding spectro-photo std with objId = 5080 41 2 282 67 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 320 39 plFiberPlate : adding spectro-photo std with objId = 5112 40 4 312 70 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 306 68 plFiberPlate : adding spectro-photo std with objId = 5080 41 6 283 48 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 316 31 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 316 116 plFiberPlate : 110 possible sky positions to use as objects from a possible 617. plFiberPlate : 107 possible sky positions to use as objects from a possible 616. plFiberPlate : 61 possible sky positions to use as objects from a possible 615. plFiberPlate : 38 possible sky positions to use as objects from a possible 614. plFiberPlate : 33 possible sky positions to use as objects from a possible 613. plFiberPlate : 40 possible sky positions to use as objects from a possible 612. plFiberPlate : 40 possible sky positions to use as objects from a possible 611. plFiberPlate : 83 possible sky positions to use as objects from a possible 610. plFiberPlate : 55 possible sky positions to use as objects from a possible 609. plFiberPlate : 29 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 13 possible sky positions to use as objects from a possible 605. plFiberPlate : 22 possible sky positions to use as objects from a possible 604. plFiberPlate : 15 possible sky positions to use as objects from a possible 603. plFiberPlate : 19 possible sky positions to use as objects from a possible 602. plFiberPlate : 79 possible sky positions to use as objects from a possible 601. plFiberPlate : 60 possible sky positions to use as objects from a possible 600. plFiberPlate : 44 possible sky positions to use as objects from a possible 599. plFiberPlate : 22 possible sky positions to use as objects from a possible 598. plFiberPlate : 10 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 15 possible sky positions to use as objects from a possible 594. plFiberPlate : 31 possible sky positions to use as objects from a possible 593. plFiberPlate : 35 possible sky positions to use as objects from a possible 592. plFiberPlate : 42 possible sky positions to use as objects from a possible 591. plFiberPlate : 32 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 24 possible sky positions to use as objects from a possible 588. plFiberPlate : 7 possible sky positions to use as objects from a possible 587. plFiberPlate : 14 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2348.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2349.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2349.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2350.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 124 2 6 99 3 11 89 4 15 100 5 22 131 6 16 98 7 6 90 8 10 102 9 9 108 10 13 149 11 8 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 93 71 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 270 95 plFiberPlate : adding spectro-photo std with objId = 4632 40 1 93 82 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 261 54 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 263 100 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 268 49 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 306 68 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 275 48 plFiberPlate : 112 possible sky positions to use as objects from a possible 591. plFiberPlate : 64 possible sky positions to use as objects from a possible 590. plFiberPlate : 42 possible sky positions to use as objects from a possible 589. plFiberPlate : 27 possible sky positions to use as objects from a possible 588. plFiberPlate : 23 possible sky positions to use as objects from a possible 587. plFiberPlate : 38 possible sky positions to use as objects from a possible 586. plFiberPlate : 33 possible sky positions to use as objects from a possible 585. plFiberPlate : 64 possible sky positions to use as objects from a possible 584. plFiberPlate : 56 possible sky positions to use as objects from a possible 583. plFiberPlate : 27 possible sky positions to use as objects from a possible 582. plFiberPlate : 19 possible sky positions to use as objects from a possible 581. plFiberPlate : 19 possible sky positions to use as objects from a possible 580. plFiberPlate : 20 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : 14 possible sky positions to use as objects from a possible 577. plFiberPlate : 27 possible sky positions to use as objects from a possible 576. plFiberPlate : 68 possible sky positions to use as objects from a possible 575. plFiberPlate : 52 possible sky positions to use as objects from a possible 574. plFiberPlate : 30 possible sky positions to use as objects from a possible 573. plFiberPlate : 18 possible sky positions to use as objects from a possible 572. plFiberPlate : 12 possible sky positions to use as objects from a possible 571. plFiberPlate : 14 possible sky positions to use as objects from a possible 570. plFiberPlate : 17 possible sky positions to use as objects from a possible 569. plFiberPlate : 24 possible sky positions to use as objects from a possible 568. plFiberPlate : 20 possible sky positions to use as objects from a possible 567. plFiberPlate : 52 possible sky positions to use as objects from a possible 566. plFiberPlate : 36 possible sky positions to use as objects from a possible 565. plFiberPlate : 15 possible sky positions to use as objects from a possible 564. plFiberPlate : 4 possible sky positions to use as objects from a possible 563. plFiberPlate : 15 possible sky positions to use as objects from a possible 562. plFiberPlate : 9 possible sky positions to use as objects from a possible 561. plFiberPlate : 16 possible sky positions to use as objects from a possible 560. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2349.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2350.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2350.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2351.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 125 2 8 103 3 8 97 4 13 115 5 13 127 6 8 110 7 10 100 8 8 108 9 12 101 10 12 160 11 5 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 3 95 33 plFiberPlate : adding spectro-photo std with objId = 5079 40 6 39 18 plFiberPlate : adding spectro-photo std with objId = 4632 40 3 89 40 plFiberPlate : adding spectro-photo std with objId = 4632 40 3 88 13 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 102 89 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 107 30 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 96 102 plFiberPlate : adding spectro-photo std with objId = 5079 40 3 41 39 plFiberPlate : 138 possible sky positions to use as objects from a possible 642. plFiberPlate : 76 possible sky positions to use as objects from a possible 641. plFiberPlate : 48 possible sky positions to use as objects from a possible 640. plFiberPlate : 50 possible sky positions to use as objects from a possible 639. plFiberPlate : 39 possible sky positions to use as objects from a possible 638. plFiberPlate : 17 possible sky positions to use as objects from a possible 637. plFiberPlate : 46 possible sky positions to use as objects from a possible 636. plFiberPlate : 86 possible sky positions to use as objects from a possible 635. plFiberPlate : 49 possible sky positions to use as objects from a possible 634. plFiberPlate : 29 possible sky positions to use as objects from a possible 633. plFiberPlate : 13 possible sky positions to use as objects from a possible 632. plFiberPlate : 19 possible sky positions to use as objects from a possible 631. plFiberPlate : 12 possible sky positions to use as objects from a possible 630. plFiberPlate : 6 possible sky positions to use as objects from a possible 629. plFiberPlate : 10 possible sky positions to use as objects from a possible 628. plFiberPlate : 36 possible sky positions to use as objects from a possible 627. plFiberPlate : 76 possible sky positions to use as objects from a possible 626. plFiberPlate : 43 possible sky positions to use as objects from a possible 625. plFiberPlate : 33 possible sky positions to use as objects from a possible 624. plFiberPlate : 16 possible sky positions to use as objects from a possible 623. plFiberPlate : 6 possible sky positions to use as objects from a possible 622. plFiberPlate : 8 possible sky positions to use as objects from a possible 621. plFiberPlate : 13 possible sky positions to use as objects from a possible 620. plFiberPlate : 26 possible sky positions to use as objects from a possible 619. plFiberPlate : 12 possible sky positions to use as objects from a possible 618. plFiberPlate : 85 possible sky positions to use as objects from a possible 617. plFiberPlate : 26 possible sky positions to use as objects from a possible 616. plFiberPlate : 16 possible sky positions to use as objects from a possible 615. plFiberPlate : 16 possible sky positions to use as objects from a possible 614. plFiberPlate : 24 possible sky positions to use as objects from a possible 613. plFiberPlate : 15 possible sky positions to use as objects from a possible 612. plFiberPlate : 11 possible sky positions to use as objects from a possible 611. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2350.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2351.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2351.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2352.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 114 2 10 116 3 10 108 4 11 117 5 9 121 6 11 93 7 10 88 8 14 102 9 8 112 10 15 158 11 15 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 54 64 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 53 46 plFiberPlate : adding spectro-photo std with objId = 5087 40 2 62 12 plFiberPlate : adding spectro-photo std with objId = 5112 40 6 325 62 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 63 20 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 63 57 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 316 31 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 316 116 plFiberPlate : 132 possible sky positions to use as objects from a possible 622. plFiberPlate : 82 possible sky positions to use as objects from a possible 621. plFiberPlate : 54 possible sky positions to use as objects from a possible 620. plFiberPlate : 48 possible sky positions to use as objects from a possible 619. plFiberPlate : 19 possible sky positions to use as objects from a possible 618. plFiberPlate : 45 possible sky positions to use as objects from a possible 617. plFiberPlate : 36 possible sky positions to use as objects from a possible 616. plFiberPlate : 86 possible sky positions to use as objects from a possible 615. plFiberPlate : 56 possible sky positions to use as objects from a possible 614. plFiberPlate : 30 possible sky positions to use as objects from a possible 613. plFiberPlate : 17 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 7 possible sky positions to use as objects from a possible 610. plFiberPlate : 9 possible sky positions to use as objects from a possible 609. plFiberPlate : 5 possible sky positions to use as objects from a possible 608. plFiberPlate : 27 possible sky positions to use as objects from a possible 607. plFiberPlate : 70 possible sky positions to use as objects from a possible 606. plFiberPlate : 35 possible sky positions to use as objects from a possible 605. plFiberPlate : 30 possible sky positions to use as objects from a possible 604. plFiberPlate : 6 possible sky positions to use as objects from a possible 603. plFiberPlate : 12 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 9 possible sky positions to use as objects from a possible 599. plFiberPlate : 21 possible sky positions to use as objects from a possible 598. plFiberPlate : 33 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 9 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 22 possible sky positions to use as objects from a possible 592. plFiberPlate : 13 possible sky positions to use as objects from a possible 591. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2351.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2352.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2352.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2353.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 133 2 6 97 3 9 96 4 12 124 5 10 119 6 6 100 7 5 96 8 7 115 9 8 103 10 13 148 11 8 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 281 14 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 278 45 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 279 41 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 283 33 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 282 32 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 287 63 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 285 25 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 292 4 plFiberPlate : 136 possible sky positions to use as objects from a possible 628. plFiberPlate : 89 possible sky positions to use as objects from a possible 627. plFiberPlate : 41 possible sky positions to use as objects from a possible 626. plFiberPlate : 24 possible sky positions to use as objects from a possible 625. plFiberPlate : 22 possible sky positions to use as objects from a possible 624. plFiberPlate : 25 possible sky positions to use as objects from a possible 623. plFiberPlate : 70 possible sky positions to use as objects from a possible 622. plFiberPlate : 91 possible sky positions to use as objects from a possible 621. plFiberPlate : 43 possible sky positions to use as objects from a possible 620. plFiberPlate : 20 possible sky positions to use as objects from a possible 619. plFiberPlate : 15 possible sky positions to use as objects from a possible 618. plFiberPlate : 9 possible sky positions to use as objects from a possible 617. plFiberPlate : 14 possible sky positions to use as objects from a possible 616. plFiberPlate : 19 possible sky positions to use as objects from a possible 615. plFiberPlate : 21 possible sky positions to use as objects from a possible 614. plFiberPlate : 11 possible sky positions to use as objects from a possible 613. plFiberPlate : 70 possible sky positions to use as objects from a possible 612. plFiberPlate : 43 possible sky positions to use as objects from a possible 611. plFiberPlate : 27 possible sky positions to use as objects from a possible 610. plFiberPlate : 19 possible sky positions to use as objects from a possible 609. plFiberPlate : 5 possible sky positions to use as objects from a possible 608. plFiberPlate : 1 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 21 possible sky positions to use as objects from a possible 605. plFiberPlate : 20 possible sky positions to use as objects from a possible 604. plFiberPlate : 67 possible sky positions to use as objects from a possible 603. plFiberPlate : 57 possible sky positions to use as objects from a possible 602. plFiberPlate : 24 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 25 possible sky positions to use as objects from a possible 597. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2352.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2353.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2353.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2354.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 116 2 14 100 3 11 101 4 12 119 5 14 137 6 11 99 7 10 89 8 12 95 9 8 108 10 15 154 11 15 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4632 40 5 102 111 plFiberPlate : adding spectro-photo std with objId = 4632 40 6 114 63 plFiberPlate : adding spectro-photo std with objId = 4576 40 2 294 86 plFiberPlate : adding spectro-photo std with objId = 5079 40 5 58 44 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 109 96 plFiberPlate : adding spectro-photo std with objId = 5079 40 4 52 25 plFiberPlate : adding spectro-photo std with objId = 4632 40 4 107 30 plFiberPlate : adding spectro-photo std with objId = 4632 40 2 109 63 plFiberPlate : 143 possible sky positions to use as objects from a possible 624. plFiberPlate : 55 possible sky positions to use as objects from a possible 623. plFiberPlate : 26 possible sky positions to use as objects from a possible 622. plFiberPlate : 31 possible sky positions to use as objects from a possible 621. plFiberPlate : 34 possible sky positions to use as objects from a possible 620. plFiberPlate : 20 possible sky positions to use as objects from a possible 619. plFiberPlate : 38 possible sky positions to use as objects from a possible 618. plFiberPlate : 87 possible sky positions to use as objects from a possible 617. plFiberPlate : 37 possible sky positions to use as objects from a possible 616. plFiberPlate : 18 possible sky positions to use as objects from a possible 615. plFiberPlate : 15 possible sky positions to use as objects from a possible 614. plFiberPlate : 13 possible sky positions to use as objects from a possible 613. plFiberPlate : 12 possible sky positions to use as objects from a possible 612. plFiberPlate : 13 possible sky positions to use as objects from a possible 611. plFiberPlate : 7 possible sky positions to use as objects from a possible 610. plFiberPlate : 3 possible sky positions to use as objects from a possible 609. plFiberPlate : 64 possible sky positions to use as objects from a possible 608. plFiberPlate : 28 possible sky positions to use as objects from a possible 607. plFiberPlate : 16 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 6 possible sky positions to use as objects from a possible 602. plFiberPlate : 5 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 58 possible sky positions to use as objects from a possible 599. plFiberPlate : 24 possible sky positions to use as objects from a possible 598. plFiberPlate : 11 possible sky positions to use as objects from a possible 597. plFiberPlate : 15 possible sky positions to use as objects from a possible 596. plFiberPlate : 15 possible sky positions to use as objects from a possible 595. plFiberPlate : 3 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2353.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2354.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2354.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2355.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 134 2 11 109 3 9 94 4 10 105 5 13 113 6 4 106 7 7 100 8 12 117 9 7 106 10 18 156 11 10 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5137 40 6 320 29 plFiberPlate : adding spectro-photo std with objId = 5087 40 1 76 9 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 344 31 plFiberPlate : adding spectro-photo std with objId = 5087 40 3 74 26 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 343 69 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 337 61 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 342 17 plFiberPlate : adding spectro-photo std with objId = 5087 40 5 82 5 plFiberPlate : 129 possible sky positions to use as objects from a possible 631. plFiberPlate : 83 possible sky positions to use as objects from a possible 630. plFiberPlate : 64 possible sky positions to use as objects from a possible 629. plFiberPlate : 44 possible sky positions to use as objects from a possible 628. plFiberPlate : 67 possible sky positions to use as objects from a possible 627. plFiberPlate : 51 possible sky positions to use as objects from a possible 626. plFiberPlate : 48 possible sky positions to use as objects from a possible 625. plFiberPlate : 76 possible sky positions to use as objects from a possible 624. plFiberPlate : 34 possible sky positions to use as objects from a possible 623. plFiberPlate : 26 possible sky positions to use as objects from a possible 622. plFiberPlate : 15 possible sky positions to use as objects from a possible 621. plFiberPlate : 15 possible sky positions to use as objects from a possible 620. plFiberPlate : 9 possible sky positions to use as objects from a possible 619. plFiberPlate : 23 possible sky positions to use as objects from a possible 618. plFiberPlate : 15 possible sky positions to use as objects from a possible 617. plFiberPlate : 21 possible sky positions to use as objects from a possible 616. plFiberPlate : 57 possible sky positions to use as objects from a possible 615. plFiberPlate : 34 possible sky positions to use as objects from a possible 614. plFiberPlate : 30 possible sky positions to use as objects from a possible 613. plFiberPlate : 26 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 9 possible sky positions to use as objects from a possible 610. plFiberPlate : 13 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 31 possible sky positions to use as objects from a possible 607. plFiberPlate : 51 possible sky positions to use as objects from a possible 606. plFiberPlate : 31 possible sky positions to use as objects from a possible 605. plFiberPlate : 27 possible sky positions to use as objects from a possible 604. plFiberPlate : 21 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 8 possible sky positions to use as objects from a possible 601. plFiberPlate : 21 possible sky positions to use as objects from a possible 600. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2354.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2355.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2355.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2356.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 125 2 10 96 3 5 88 4 12 105 5 9 130 6 8 102 7 10 103 8 9 123 9 9 120 10 11 153 11 6 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 300 116 plFiberPlate : adding spectro-photo std with objId = 5079 40 1 56 2 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 296 71 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 295 32 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 297 60 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 305 16 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 306 114 plFiberPlate : adding spectro-photo std with objId = 5071 40 5 292 4 plFiberPlate : 113 possible sky positions to use as objects from a possible 633. plFiberPlate : 73 possible sky positions to use as objects from a possible 632. plFiberPlate : 34 possible sky positions to use as objects from a possible 631. plFiberPlate : 31 possible sky positions to use as objects from a possible 630. plFiberPlate : 16 possible sky positions to use as objects from a possible 629. plFiberPlate : 27 possible sky positions to use as objects from a possible 628. plFiberPlate : 53 possible sky positions to use as objects from a possible 627. plFiberPlate : 96 possible sky positions to use as objects from a possible 626. plFiberPlate : 61 possible sky positions to use as objects from a possible 625. plFiberPlate : 40 possible sky positions to use as objects from a possible 624. plFiberPlate : 32 possible sky positions to use as objects from a possible 623. plFiberPlate : 16 possible sky positions to use as objects from a possible 622. plFiberPlate : 20 possible sky positions to use as objects from a possible 621. plFiberPlate : 26 possible sky positions to use as objects from a possible 620. plFiberPlate : 24 possible sky positions to use as objects from a possible 619. plFiberPlate : 17 possible sky positions to use as objects from a possible 618. plFiberPlate : 89 possible sky positions to use as objects from a possible 617. plFiberPlate : 49 possible sky positions to use as objects from a possible 616. plFiberPlate : 29 possible sky positions to use as objects from a possible 615. plFiberPlate : 24 possible sky positions to use as objects from a possible 614. plFiberPlate : 10 possible sky positions to use as objects from a possible 613. plFiberPlate : 19 possible sky positions to use as objects from a possible 612. plFiberPlate : 27 possible sky positions to use as objects from a possible 611. plFiberPlate : 13 possible sky positions to use as objects from a possible 610. plFiberPlate : 26 possible sky positions to use as objects from a possible 609. plFiberPlate : 32 possible sky positions to use as objects from a possible 608. plFiberPlate : 23 possible sky positions to use as objects from a possible 607. plFiberPlate : 14 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 17 possible sky positions to use as objects from a possible 604. plFiberPlate : 22 possible sky positions to use as objects from a possible 603. plFiberPlate : 24 possible sky positions to use as objects from a possible 602. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2355.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2356.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2356.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2357.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 127 2 9 103 3 9 98 4 12 115 5 13 132 6 10 95 7 3 91 8 3 108 9 14 98 10 17 167 11 11 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5137 40 6 333 106 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 358 14 plFiberPlate : adding spectro-photo std with objId = 5087 40 4 93 8 plFiberPlate : adding spectro-photo std with objId = 5112 40 2 361 37 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 350 11 plFiberPlate : adding spectro-photo std with objId = 5112 40 5 348 99 plFiberPlate : adding spectro-photo std with objId = 5112 40 1 361 41 plFiberPlate : adding spectro-photo std with objId = 5112 40 3 353 33 plFiberPlate : 123 possible sky positions to use as objects from a possible 624. plFiberPlate : 93 possible sky positions to use as objects from a possible 623. plFiberPlate : 76 possible sky positions to use as objects from a possible 622. plFiberPlate : 49 possible sky positions to use as objects from a possible 621. plFiberPlate : 36 possible sky positions to use as objects from a possible 620. plFiberPlate : 35 possible sky positions to use as objects from a possible 619. plFiberPlate : 43 possible sky positions to use as objects from a possible 618. plFiberPlate : 72 possible sky positions to use as objects from a possible 617. plFiberPlate : 40 possible sky positions to use as objects from a possible 616. plFiberPlate : 31 possible sky positions to use as objects from a possible 615. plFiberPlate : 22 possible sky positions to use as objects from a possible 614. plFiberPlate : 16 possible sky positions to use as objects from a possible 613. plFiberPlate : 12 possible sky positions to use as objects from a possible 612. plFiberPlate : 4 possible sky positions to use as objects from a possible 611. plFiberPlate : 7 possible sky positions to use as objects from a possible 610. plFiberPlate : 17 possible sky positions to use as objects from a possible 609. plFiberPlate : 66 possible sky positions to use as objects from a possible 608. plFiberPlate : 46 possible sky positions to use as objects from a possible 607. plFiberPlate : 32 possible sky positions to use as objects from a possible 606. plFiberPlate : 13 possible sky positions to use as objects from a possible 605. plFiberPlate : 8 possible sky positions to use as objects from a possible 604. plFiberPlate : 4 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 11 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : 50 possible sky positions to use as objects from a possible 599. plFiberPlate : 40 possible sky positions to use as objects from a possible 598. plFiberPlate : 30 possible sky positions to use as objects from a possible 597. plFiberPlate : 18 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 12 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2356.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2357.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2357.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2358.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 128 2 6 106 3 6 107 4 7 106 5 10 142 6 7 109 7 10 84 8 7 107 9 5 96 10 10 148 11 6 112 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 306 50 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 308 55 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 305 16 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 312 44 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 320 11 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 82 47 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 317 75 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 306 114 plFiberPlate : 131 possible sky positions to use as objects from a possible 630. plFiberPlate : 58 possible sky positions to use as objects from a possible 629. plFiberPlate : 46 possible sky positions to use as objects from a possible 628. plFiberPlate : 39 possible sky positions to use as objects from a possible 627. plFiberPlate : 24 possible sky positions to use as objects from a possible 626. plFiberPlate : 10 possible sky positions to use as objects from a possible 625. plFiberPlate : 52 possible sky positions to use as objects from a possible 624. plFiberPlate : 54 possible sky positions to use as objects from a possible 623. plFiberPlate : 33 possible sky positions to use as objects from a possible 622. plFiberPlate : 17 possible sky positions to use as objects from a possible 621. plFiberPlate : 8 possible sky positions to use as objects from a possible 620. plFiberPlate : 15 possible sky positions to use as objects from a possible 619. plFiberPlate : 2 possible sky positions to use as objects from a possible 618. plFiberPlate : 14 possible sky positions to use as objects from a possible 617. plFiberPlate : 19 possible sky positions to use as objects from a possible 616. plFiberPlate : 16 possible sky positions to use as objects from a possible 615. plFiberPlate : 76 possible sky positions to use as objects from a possible 614. plFiberPlate : 45 possible sky positions to use as objects from a possible 613. plFiberPlate : 19 possible sky positions to use as objects from a possible 612. plFiberPlate : 9 possible sky positions to use as objects from a possible 611. plFiberPlate : 10 possible sky positions to use as objects from a possible 610. plFiberPlate : 10 possible sky positions to use as objects from a possible 609. plFiberPlate : 12 possible sky positions to use as objects from a possible 608. plFiberPlate : 13 possible sky positions to use as objects from a possible 607. plFiberPlate : 18 possible sky positions to use as objects from a possible 606. plFiberPlate : 59 possible sky positions to use as objects from a possible 605. plFiberPlate : 40 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 19 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : 17 possible sky positions to use as objects from a possible 599. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2357.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2358.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2358.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2005.11.1/plPlugMapP-2359.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 123 2 9 93 3 10 98 4 7 128 5 12 114 6 8 88 7 7 99 8 7 121 9 8 111 10 14 152 11 9 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 325 54 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 327 8 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 322 13 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 320 16 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 320 11 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 326 2 plFiberPlate : adding spectro-photo std with objId = 5087 40 6 91 10 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 323 31 plFiberPlate : 139 possible sky positions to use as objects from a possible 625. plFiberPlate : 65 possible sky positions to use as objects from a possible 624. plFiberPlate : 37 possible sky positions to use as objects from a possible 623. plFiberPlate : 44 possible sky positions to use as objects from a possible 622. plFiberPlate : 23 possible sky positions to use as objects from a possible 621. plFiberPlate : 45 possible sky positions to use as objects from a possible 620. plFiberPlate : 29 possible sky positions to use as objects from a possible 619. plFiberPlate : 84 possible sky positions to use as objects from a possible 618. plFiberPlate : 59 possible sky positions to use as objects from a possible 617. plFiberPlate : 50 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 20 possible sky positions to use as objects from a possible 614. plFiberPlate : 10 possible sky positions to use as objects from a possible 613. plFiberPlate : 12 possible sky positions to use as objects from a possible 612. plFiberPlate : 10 possible sky positions to use as objects from a possible 611. plFiberPlate : 31 possible sky positions to use as objects from a possible 610. plFiberPlate : 75 possible sky positions to use as objects from a possible 609. plFiberPlate : 47 possible sky positions to use as objects from a possible 608. plFiberPlate : 25 possible sky positions to use as objects from a possible 607. plFiberPlate : 20 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 7 possible sky positions to use as objects from a possible 604. plFiberPlate : 20 possible sky positions to use as objects from a possible 603. plFiberPlate : 11 possible sky positions to use as objects from a possible 602. plFiberPlate : 33 possible sky positions to use as objects from a possible 601. plFiberPlate : 35 possible sky positions to use as objects from a possible 600. plFiberPlate : 30 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 6 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 9 possible sky positions to use as objects from a possible 595. plFiberPlate : 31 possible sky positions to use as objects from a possible 594. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2358.ps/CPS Open /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2359.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2005.11.1/plOverlay-2359.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Thu Nov 10 15:33:31 CST 2005 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_129/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_129/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 19 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2341.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.1419,5.8544) and (-11.90,4.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2341.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2341.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2342.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (9.7036,8.3492) and (10.30,7.54) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2342.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2342.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2343.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2343.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2343.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2344.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2344.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2344.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2345.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.2325,-5.9911) and (11.89,-4.64) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2345.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2345.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2346.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.6950,4.1502) and (12.52,2.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2346.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2346.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2347.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2347.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2347.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2348.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.3659,2.6874) and (-12.64,1.42) plMakeFanucCodes : fixed path between (-7.3752,-10.4610) and (-5.01,-10.98) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2348.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2348.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2349.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.4006,2.4078) and (12.74,1.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2349.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2349.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2350.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0880,6.3426) and (11.42,5.73) plMakeFanucCodes : fixed path between (12.6068,2.1705) and (12.77,-0.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2350.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2350.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2351.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.1979,5.9828) and (11.94,4.40) plMakeFanucCodes : fixed path between (-12.4643,-2.6925) and (-12.65,-0.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2351.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2351.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2352.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9356,-6.2855) and (-11.71,-4.65) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2352.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2352.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2353.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.0218,-6.3713) and (-12.01,-3.73) plMakeFanucCodes : fixed path between (-6.9629,10.7142) and (-5.25,11.10) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2353.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2353.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2354.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.2610,3.3547) and (-12.64,1.65) plMakeFanucCodes : fixed path between (-7.2246,-10.3975) and (-4.82,-11.20) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2354.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2354.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2355.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-12.0412,-4.3198) and (-12.27,-2.47) plMakeFanucCodes : fixed path between (10.5222,7.1942) and (11.59,5.38) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2355.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2355.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2356.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0422,6.4037) and (12.04,2.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2356.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2356.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2357.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0557,-6.2720) and (11.46,-4.99) plMakeFanucCodes : fixed path between (-11.3712,5.7922) and (-11.60,5.21) plMakeFanucCodes : fixed path between (-11.9768,4.1999) and (-12.27,3.64) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2357.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2357.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2358.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2358.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2358.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2359.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2359.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2005.11.1/plFanuc-2359.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Thu Nov 10 15:34:49 CST 2005 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_129/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_129/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa000c7c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 19 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2341 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2342 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2343 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2344 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2345 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2346 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2347 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2348 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2349 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2350 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2351 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2352 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2353 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2354 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2355 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2356 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2357 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2358 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2359 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Thu Nov 10 15:35:19 CST 2005 Begin running "plateEnder dr2005.11.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_129/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_129/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2005.11.1 -morePipes 1" failed. PS: Read file for stderr output of this job.