Sender: LSF System Subject: Job 84583: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Fri Jan 6 16:22:18 2006 Results reported at Fri Jan 6 16:27:04 2006 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2006.01.2 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 211.13 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Fri Jan 6 16:22:30 CST 2006 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Fri Jan 6 16:22:51 CST 2006 PATH = /sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v4_04/Linux-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/dp/v17_190/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Fri Jan 6 16:22:51 CST 2006 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8a/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v17_190/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5a/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_4/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2a/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_3a/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v4_04/Linux-2 INT_DIR=/sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/doc/www/dervish.home.html KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v2_1/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_3/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_12/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_24/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2a/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Fri Jan 6 16:22:52 CST 2006 Begin running plate --------------------------------------------------------------- Fri Jan 6 16:22:52 CST 2006 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_190/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_190/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x8ce42d4 makePlates : beginning loop over plObs chain; makePlates : making 20 plates makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8128.par makePlates : plateInfo struct for plate 2378 : (h4).mjd 53792 (h4).raCen 43.5849 (h4).decCen 34.3317 (h4).haCen 35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 43.585 34.332 43.585 35.832 plMakePlateFromTile : mjd of obs : 53792.490774 Observed HA/dec of plate center, fiducial point (deg) : 34.998 34.361 34.997 35.860 The rotation angle of the fid. point is -83.084745 plMakePlateFromTile : beginning loop over 1889 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8129.par makePlates : plateInfo struct for plate 2379 : (h4).mjd 53792 (h4).raCen 38.171 (h4).decCen 25.496 (h4).haCen 35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 38.171 25.496 38.171 26.996 plMakePlateFromTile : mjd of obs : 53792.475758 Observed HA/dec of plate center, fiducial point (deg) : 34.998 25.529 34.997 27.028 The rotation angle of the fid. point is -68.293268 plMakePlateFromTile : beginning loop over 1749 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8130.par makePlates : plateInfo struct for plate 2380 : (h4).mjd 53792 (h4).raCen 134.445 (h4).decCen 37.1319 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 134.445 37.132 134.445 38.632 plMakePlateFromTile : mjd of obs : 53792.520821 Observed HA/dec of plate center, fiducial point (deg) : -45.002 37.111 -45.003 38.610 The rotation angle of the fid. point is 83.020956 plMakePlateFromTile : beginning loop over 1629 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8131.par makePlates : plateInfo struct for plate 2381 : (h4).mjd 53792 (h4).raCen 139.436 (h4).decCen 30.432 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 139.436 30.432 139.436 31.932 plMakePlateFromTile : mjd of obs : 53792.534633 Observed HA/dec of plate center, fiducial point (deg) : -45.002 30.410 -45.003 31.910 The rotation angle of the fid. point is 74.425014 plMakePlateFromTile : beginning loop over 1576 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8132.par makePlates : plateInfo struct for plate 2382 : (h4).mjd 53792 (h4).raCen 141.562 (h4).decCen 7.296 (h4).haCen -40 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 141.562 7.296 141.562 8.796 plMakePlateFromTile : mjd of obs : 53792.554346 Observed HA/dec of plate center, fiducial point (deg) : -40.002 7.280 -40.003 8.779 The rotation angle of the fid. point is 49.909806 plMakePlateFromTile : beginning loop over 1672 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8133.par makePlates : plateInfo struct for plate 2383 : (h4).mjd 53792 (h4).raCen 146.378 (h4).decCen 62.0688 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 146.378 62.069 146.378 63.569 plMakePlateFromTile : mjd of obs : 53792.553913 Observed HA/dec of plate center, fiducial point (deg) : -45.002 62.035 -45.004 63.535 The rotation angle of the fid. point is 114.544527 plMakePlateFromTile : beginning loop over 1583 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8134.par makePlates : plateInfo struct for plate 2384 : (h4).mjd 53792 (h4).raCen 144.67 (h4).decCen 52.8617 (h4).haCen -45 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 144.670 52.862 144.670 54.362 plMakePlateFromTile : mjd of obs : 53792.549164 Observed HA/dec of plate center, fiducial point (deg) : -45.002 52.832 -45.003 54.331 The rotation angle of the fid. point is 103.877602 plMakePlateFromTile : beginning loop over 1604 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8135.par makePlates : plateInfo struct for plate 2385 : (h4).mjd 53792 (h4).raCen 150 (h4).decCen 0 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 150.000 0.000 150.000 1.500 plMakePlateFromTile : mjd of obs : 53792.605424 Observed HA/dec of plate center, fiducial point (deg) : -30.002 -0.018 -30.003 1.482 The rotation angle of the fid. point is 37.844267 plMakePlateFromTile : beginning loop over 1601 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8136.par makePlates : plateInfo struct for plate 2386 : (h4).mjd 53792 (h4).raCen 152.378 (h4).decCen 25.9324 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.378 25.932 152.378 27.432 plMakePlateFromTile : mjd of obs : 53792.606497 Observed HA/dec of plate center, fiducial point (deg) : -32.002 25.905 -32.003 27.404 The rotation angle of the fid. point is 68.519018 plMakePlateFromTile : beginning loop over 1559 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8137.par makePlates : plateInfo struct for plate 2387 : (h4).mjd 53792 (h4).raCen 152.516 (h4).decCen 35.2913 (h4).haCen -32 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 152.516 35.291 152.516 36.791 plMakePlateFromTile : mjd of obs : 53792.606890 Observed HA/dec of plate center, fiducial point (deg) : -32.002 35.261 -32.003 36.761 The rotation angle of the fid. point is 86.108122 plMakePlateFromTile : beginning loop over 1600 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8138.par makePlates : plateInfo struct for plate 2388 : (h4).mjd 53792 (h4).raCen 156.635 (h4).decCen 8.8195 (h4).haCen 8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 156.635 8.819 156.635 10.319 plMakePlateFromTile : mjd of obs : 53792.729111 Observed HA/dec of plate center, fiducial point (deg) : 7.998 8.795 7.997 10.294 The rotation angle of the fid. point is -15.990734 plMakePlateFromTile : beginning loop over 1584 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8139.par makePlates : plateInfo struct for plate 2389 : (h4).mjd 53792 (h4).raCen 162 (h4).decCen 0 (h4).haCen 3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.000 0.000 162.000 1.500 plMakePlateFromTile : mjd of obs : 53792.730112 Observed HA/dec of plate center, fiducial point (deg) : 2.998 -0.023 2.997 1.476 The rotation angle of the fid. point is -4.627213 plMakePlateFromTile : beginning loop over 1560 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8140.par makePlates : plateInfo struct for plate 2390 : (h4).mjd 53792 (h4).raCen 163.799 (h4).decCen 48.0124 (h4).haCen -43 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.799 48.012 163.799 49.512 plMakePlateFromTile : mjd of obs : 53792.607659 Observed HA/dec of plate center, fiducial point (deg) : -43.002 47.976 -43.003 49.476 The rotation angle of the fid. point is 99.350205 plMakePlateFromTile : beginning loop over 1588 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8141.par makePlates : plateInfo struct for plate 2391 : (h4).mjd 53792 (h4).raCen 165.556 (h4).decCen 28.5648 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.556 28.565 165.556 30.065 plMakePlateFromTile : mjd of obs : 53792.731668 Observed HA/dec of plate center, fiducial point (deg) : -0.002 28.531 -0.003 30.031 The rotation angle of the fid. point is 0.042986 plMakePlateFromTile : beginning loop over 1562 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8142.par makePlates : plateInfo struct for plate 2392 : (h4).mjd 53792 (h4).raCen 166.971 (h4).decCen 38.5864 (h4).haCen -1 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 166.971 38.586 166.971 40.086 plMakePlateFromTile : mjd of obs : 53792.732825 Observed HA/dec of plate center, fiducial point (deg) : -1.002 38.550 -1.003 40.049 The rotation angle of the fid. point is 171.687183 plMakePlateFromTile : beginning loop over 1570 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8143.par makePlates : plateInfo struct for plate 2393 : (h4).mjd 53792 (h4).raCen 168.766 (h4).decCen 9.60887 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.766 9.609 168.766 11.109 plMakePlateFromTile : mjd of obs : 53792.732233 Observed HA/dec of plate center, fiducial point (deg) : -3.002 9.581 -3.003 11.080 The rotation angle of the fid. point is 6.386121 plMakePlateFromTile : beginning loop over 1597 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8144.par makePlates : plateInfo struct for plate 2394 : (h4).mjd 53792 (h4).raCen 169.3 (h4).decCen 59.0479 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.300 59.048 169.300 60.548 plMakePlateFromTile : mjd of obs : 53792.730989 Observed HA/dec of plate center, fiducial point (deg) : -4.002 59.004 -4.003 60.504 The rotation angle of the fid. point is 172.429617 plMakePlateFromTile : beginning loop over 1602 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8145.par makePlates : plateInfo struct for plate 2395 : (h4).mjd 53792 (h4).raCen 172.122 (h4).decCen 66.9793 (h4).haCen 22 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.122 66.979 172.122 68.479 plMakePlateFromTile : mjd of obs : 53792.810901 Observed HA/dec of plate center, fiducial point (deg) : 21.998 66.933 21.994 68.432 The rotation angle of the fid. point is -148.005180 plMakePlateFromTile : beginning loop over 1628 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8146.par makePlates : plateInfo struct for plate 2396 : (h4).mjd 53792 (h4).raCen 174 (h4).decCen 0 (h4).haCen 21 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.000 0.000 174.000 1.500 plMakePlateFromTile : mjd of obs : 53792.813233 Observed HA/dec of plate center, fiducial point (deg) : 20.998 -0.024 20.998 1.475 The rotation angle of the fid. point is -29.076920 plMakePlateFromTile : beginning loop over 1566 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapT-8147.par makePlates : plateInfo struct for plate 2397 : (h4).mjd 53792 (h4).raCen 48.789 (h4).decCen 41.197 (h4).haCen 35 (h4).theta 0 (h4).tempShop 0 (h4).tempObs -2.7 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 48.789 41.197 48.789 42.697 plMakePlateFromTile : mjd of obs : 53792.505212 Observed HA/dec of plate center, fiducial point (deg) : 34.998 41.222 34.996 42.722 The rotation angle of the fid. point is -95.484235 plMakePlateFromTile : beginning loop over 2003 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Fri Jan 6 16:23:42 CST 2006 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_190/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_190/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 20 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2378.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 65 139 2 52 123 3 47 115 4 38 145 5 37 137 6 30 110 7 44 103 8 80 123 9 42 144 10 83 208 11 68 144 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 193 75 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 191 35 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 187 26 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 186 90 plFiberPlate : adding spectro-photo std with objId = 5817 40 4 185 26 plFiberPlate : adding spectro-photo std with objId = 5817 40 5 183 96 plFiberPlate : adding spectro-photo std with objId = 5817 40 4 181 100 plFiberPlate : adding spectro-photo std with objId = 5817 40 2 181 275 plFiberPlate : 165 possible sky positions to use as objects from a possible 727. plFiberPlate : 128 possible sky positions to use as objects from a possible 726. plFiberPlate : 77 possible sky positions to use as objects from a possible 725. plFiberPlate : 40 possible sky positions to use as objects from a possible 724. plFiberPlate : 53 possible sky positions to use as objects from a possible 723. plFiberPlate : 40 possible sky positions to use as objects from a possible 722. plFiberPlate : 43 possible sky positions to use as objects from a possible 721. plFiberPlate : 117 possible sky positions to use as objects from a possible 720. plFiberPlate : 81 possible sky positions to use as objects from a possible 719. plFiberPlate : 58 possible sky positions to use as objects from a possible 718. plFiberPlate : 35 possible sky positions to use as objects from a possible 717. plFiberPlate : 22 possible sky positions to use as objects from a possible 716. plFiberPlate : 27 possible sky positions to use as objects from a possible 715. plFiberPlate : 20 possible sky positions to use as objects from a possible 714. plFiberPlate : 15 possible sky positions to use as objects from a possible 713. plFiberPlate : 13 possible sky positions to use as objects from a possible 712. plFiberPlate : 94 possible sky positions to use as objects from a possible 711. plFiberPlate : 71 possible sky positions to use as objects from a possible 710. plFiberPlate : 45 possible sky positions to use as objects from a possible 709. plFiberPlate : 26 possible sky positions to use as objects from a possible 708. plFiberPlate : 17 possible sky positions to use as objects from a possible 707. plFiberPlate : 19 possible sky positions to use as objects from a possible 706. plFiberPlate : 16 possible sky positions to use as objects from a possible 705. plFiberPlate : 16 possible sky positions to use as objects from a possible 704. plFiberPlate : 10 possible sky positions to use as objects from a possible 703. plFiberPlate : 71 possible sky positions to use as objects from a possible 702. plFiberPlate : 47 possible sky positions to use as objects from a possible 701. plFiberPlate : 22 possible sky positions to use as objects from a possible 700. plFiberPlate : 17 possible sky positions to use as objects from a possible 699. plFiberPlate : 14 possible sky positions to use as objects from a possible 698. plFiberPlate : 29 possible sky positions to use as objects from a possible 697. plFiberPlate : 20 possible sky positions to use as objects from a possible 696. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 777 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2378.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2378.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2379.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 42 141 2 39 124 3 25 131 4 23 159 5 27 155 6 22 142 7 34 141 8 52 143 9 29 166 10 48 227 11 42 152 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5817 40 5 130 132 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 129 106 plFiberPlate : adding spectro-photo std with objId = 5817 40 4 124 154 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 123 21 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 120 89 plFiberPlate : adding spectro-photo std with objId = 5817 40 3 119 114 plFiberPlate : adding spectro-photo std with objId = 5817 40 5 114 71 plFiberPlate : adding spectro-photo std with objId = 5817 40 3 114 26 plFiberPlate : 190 possible sky positions to use as objects from a possible 812. plFiberPlate : 120 possible sky positions to use as objects from a possible 811. plFiberPlate : 81 possible sky positions to use as objects from a possible 810. plFiberPlate : 48 possible sky positions to use as objects from a possible 809. plFiberPlate : 56 possible sky positions to use as objects from a possible 808. plFiberPlate : 24 possible sky positions to use as objects from a possible 807. plFiberPlate : 58 possible sky positions to use as objects from a possible 806. plFiberPlate : 128 possible sky positions to use as objects from a possible 805. plFiberPlate : 79 possible sky positions to use as objects from a possible 804. plFiberPlate : 55 possible sky positions to use as objects from a possible 803. plFiberPlate : 32 possible sky positions to use as objects from a possible 802. plFiberPlate : 27 possible sky positions to use as objects from a possible 801. plFiberPlate : 17 possible sky positions to use as objects from a possible 800. plFiberPlate : 19 possible sky positions to use as objects from a possible 799. plFiberPlate : 24 possible sky positions to use as objects from a possible 798. plFiberPlate : 30 possible sky positions to use as objects from a possible 797. plFiberPlate : 87 possible sky positions to use as objects from a possible 796. plFiberPlate : 62 possible sky positions to use as objects from a possible 795. plFiberPlate : 47 possible sky positions to use as objects from a possible 794. plFiberPlate : 30 possible sky positions to use as objects from a possible 793. plFiberPlate : 13 possible sky positions to use as objects from a possible 792. plFiberPlate : 17 possible sky positions to use as objects from a possible 791. plFiberPlate : 15 possible sky positions to use as objects from a possible 790. plFiberPlate : 14 possible sky positions to use as objects from a possible 789. plFiberPlate : 26 possible sky positions to use as objects from a possible 788. plFiberPlate : 70 possible sky positions to use as objects from a possible 787. plFiberPlate : 45 possible sky positions to use as objects from a possible 786. plFiberPlate : 37 possible sky positions to use as objects from a possible 785. plFiberPlate : 19 possible sky positions to use as objects from a possible 784. plFiberPlate : 30 possible sky positions to use as objects from a possible 783. plFiberPlate : 32 possible sky positions to use as objects from a possible 782. plFiberPlate : 20 possible sky positions to use as objects from a possible 781. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 770 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2378.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2379.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2379.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2380.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 158 2 17 124 3 19 133 4 12 161 5 13 166 6 8 120 7 7 138 8 21 158 9 14 166 10 35 226 11 28 152 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2887 40 6 179 97 plFiberPlate : adding spectro-photo std with objId = 2887 40 4 179 23 plFiberPlate : adding spectro-photo std with objId = 2887 40 6 178 17 plFiberPlate : adding spectro-photo std with objId = 2961 40 3 140 20 plFiberPlate : adding spectro-photo std with objId = 2961 40 1 139 78 plFiberPlate : adding spectro-photo std with objId = 2961 40 3 138 40 plFiberPlate : adding spectro-photo std with objId = 2961 40 6 137 109 plFiberPlate : adding spectro-photo std with objId = 2961 40 4 135 190 plFiberPlate : 173 possible sky positions to use as objects from a possible 835. plFiberPlate : 126 possible sky positions to use as objects from a possible 834. plFiberPlate : 68 possible sky positions to use as objects from a possible 833. plFiberPlate : 37 possible sky positions to use as objects from a possible 832. plFiberPlate : 27 possible sky positions to use as objects from a possible 831. plFiberPlate : 32 possible sky positions to use as objects from a possible 830. plFiberPlate : 89 possible sky positions to use as objects from a possible 829. plFiberPlate : 106 possible sky positions to use as objects from a possible 828. plFiberPlate : 97 possible sky positions to use as objects from a possible 827. plFiberPlate : 65 possible sky positions to use as objects from a possible 826. plFiberPlate : 32 possible sky positions to use as objects from a possible 825. plFiberPlate : 21 possible sky positions to use as objects from a possible 824. plFiberPlate : 11 possible sky positions to use as objects from a possible 823. plFiberPlate : 35 possible sky positions to use as objects from a possible 822. plFiberPlate : 23 possible sky positions to use as objects from a possible 821. plFiberPlate : 22 possible sky positions to use as objects from a possible 820. plFiberPlate : 108 possible sky positions to use as objects from a possible 819. plFiberPlate : 75 possible sky positions to use as objects from a possible 818. plFiberPlate : 53 possible sky positions to use as objects from a possible 817. plFiberPlate : 19 possible sky positions to use as objects from a possible 816. plFiberPlate : 25 possible sky positions to use as objects from a possible 815. plFiberPlate : 23 possible sky positions to use as objects from a possible 814. plFiberPlate : 22 possible sky positions to use as objects from a possible 813. plFiberPlate : 18 possible sky positions to use as objects from a possible 812. plFiberPlate : 16 possible sky positions to use as objects from a possible 811. plFiberPlate : 57 possible sky positions to use as objects from a possible 810. plFiberPlate : 49 possible sky positions to use as objects from a possible 809. plFiberPlate : 27 possible sky positions to use as objects from a possible 808. plFiberPlate : 23 possible sky positions to use as objects from a possible 807. plFiberPlate : 19 possible sky positions to use as objects from a possible 806. plFiberPlate : 26 possible sky positions to use as objects from a possible 805. plFiberPlate : 35 possible sky positions to use as objects from a possible 804. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 738 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2379.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2380.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2380.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2381.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 160 2 19 111 3 16 133 4 13 159 5 11 158 6 12 114 7 9 132 8 9 157 9 12 163 10 31 244 11 25 168 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 194 24 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 188 58 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 126 46 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 124 17 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 124 56 plFiberPlate : adding spectro-photo std with objId = 3900 41 2 123 138 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 122 13 plFiberPlate : adding spectro-photo std with objId = 3900 41 4 121 46 plFiberPlate : 180 possible sky positions to use as objects from a possible 840. plFiberPlate : 133 possible sky positions to use as objects from a possible 839. plFiberPlate : 85 possible sky positions to use as objects from a possible 838. plFiberPlate : 53 possible sky positions to use as objects from a possible 837. plFiberPlate : 33 possible sky positions to use as objects from a possible 836. plFiberPlate : 71 possible sky positions to use as objects from a possible 835. plFiberPlate : 85 possible sky positions to use as objects from a possible 834. plFiberPlate : 120 possible sky positions to use as objects from a possible 833. plFiberPlate : 94 possible sky positions to use as objects from a possible 832. plFiberPlate : 70 possible sky positions to use as objects from a possible 831. plFiberPlate : 57 possible sky positions to use as objects from a possible 830. plFiberPlate : 25 possible sky positions to use as objects from a possible 829. plFiberPlate : 31 possible sky positions to use as objects from a possible 828. plFiberPlate : 21 possible sky positions to use as objects from a possible 827. plFiberPlate : 31 possible sky positions to use as objects from a possible 826. plFiberPlate : 21 possible sky positions to use as objects from a possible 825. plFiberPlate : 104 possible sky positions to use as objects from a possible 824. plFiberPlate : 54 possible sky positions to use as objects from a possible 823. plFiberPlate : 49 possible sky positions to use as objects from a possible 822. plFiberPlate : 30 possible sky positions to use as objects from a possible 821. plFiberPlate : 18 possible sky positions to use as objects from a possible 820. plFiberPlate : 17 possible sky positions to use as objects from a possible 819. plFiberPlate : 25 possible sky positions to use as objects from a possible 818. plFiberPlate : 12 possible sky positions to use as objects from a possible 817. plFiberPlate : 22 possible sky positions to use as objects from a possible 816. plFiberPlate : 65 possible sky positions to use as objects from a possible 815. plFiberPlate : 40 possible sky positions to use as objects from a possible 814. plFiberPlate : 29 possible sky positions to use as objects from a possible 813. plFiberPlate : 23 possible sky positions to use as objects from a possible 812. plFiberPlate : 21 possible sky positions to use as objects from a possible 811. plFiberPlate : 17 possible sky positions to use as objects from a possible 810. plFiberPlate : 38 possible sky positions to use as objects from a possible 809. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 703 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2380.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2381.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2381.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2382.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 35 171 2 27 105 3 15 126 4 16 157 5 6 184 6 6 133 7 5 130 8 10 174 9 5 176 10 42 219 11 43 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 147 106 plFiberPlate : adding spectro-photo std with objId = 3031 40 2 145 112 plFiberPlate : adding spectro-photo std with objId = 3031 40 2 142 42 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 140 5 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 138 143 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 137 54 plFiberPlate : adding spectro-photo std with objId = 3031 40 4 137 141 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 135 99 plFiberPlate : 190 possible sky positions to use as objects from a possible 856. plFiberPlate : 127 possible sky positions to use as objects from a possible 855. plFiberPlate : 76 possible sky positions to use as objects from a possible 854. plFiberPlate : 55 possible sky positions to use as objects from a possible 853. plFiberPlate : 42 possible sky positions to use as objects from a possible 852. plFiberPlate : 33 possible sky positions to use as objects from a possible 851. plFiberPlate : 61 possible sky positions to use as objects from a possible 850. plFiberPlate : 107 possible sky positions to use as objects from a possible 849. plFiberPlate : 100 possible sky positions to use as objects from a possible 848. plFiberPlate : 85 possible sky positions to use as objects from a possible 847. plFiberPlate : 56 possible sky positions to use as objects from a possible 846. plFiberPlate : 28 possible sky positions to use as objects from a possible 845. plFiberPlate : 32 possible sky positions to use as objects from a possible 844. plFiberPlate : 25 possible sky positions to use as objects from a possible 843. plFiberPlate : 26 possible sky positions to use as objects from a possible 842. plFiberPlate : 23 possible sky positions to use as objects from a possible 841. plFiberPlate : 126 possible sky positions to use as objects from a possible 840. plFiberPlate : 89 possible sky positions to use as objects from a possible 839. plFiberPlate : 70 possible sky positions to use as objects from a possible 838. plFiberPlate : 48 possible sky positions to use as objects from a possible 837. plFiberPlate : 31 possible sky positions to use as objects from a possible 836. plFiberPlate : 19 possible sky positions to use as objects from a possible 835. plFiberPlate : 20 possible sky positions to use as objects from a possible 834. plFiberPlate : 31 possible sky positions to use as objects from a possible 833. plFiberPlate : 22 possible sky positions to use as objects from a possible 832. plFiberPlate : 83 possible sky positions to use as objects from a possible 831. plFiberPlate : 65 possible sky positions to use as objects from a possible 830. plFiberPlate : 32 possible sky positions to use as objects from a possible 829. plFiberPlate : 34 possible sky positions to use as objects from a possible 828. plFiberPlate : 15 possible sky positions to use as objects from a possible 827. plFiberPlate : 31 possible sky positions to use as objects from a possible 826. plFiberPlate : 26 possible sky positions to use as objects from a possible 825. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 749 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2381.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2382.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2382.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2383.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 158 2 13 120 3 21 125 4 21 152 5 19 156 6 11 117 7 17 124 8 19 158 9 20 169 10 42 224 11 23 155 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1412 40 2 64 22 plFiberPlate : adding spectro-photo std with objId = 1412 40 4 55 82 plFiberPlate : adding spectro-photo std with objId = 1350 40 2 259 18 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 256 14 plFiberPlate : adding spectro-photo std with objId = 1350 40 1 255 57 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 253 151 plFiberPlate : adding spectro-photo std with objId = 1350 40 1 250 25 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 249 89 plFiberPlate : 191 possible sky positions to use as objects from a possible 815. plFiberPlate : 116 possible sky positions to use as objects from a possible 814. plFiberPlate : 79 possible sky positions to use as objects from a possible 813. plFiberPlate : 45 possible sky positions to use as objects from a possible 812. plFiberPlate : 47 possible sky positions to use as objects from a possible 811. plFiberPlate : 41 possible sky positions to use as objects from a possible 810. plFiberPlate : 77 possible sky positions to use as objects from a possible 809. plFiberPlate : 117 possible sky positions to use as objects from a possible 808. plFiberPlate : 88 possible sky positions to use as objects from a possible 807. plFiberPlate : 67 possible sky positions to use as objects from a possible 806. plFiberPlate : 44 possible sky positions to use as objects from a possible 805. plFiberPlate : 23 possible sky positions to use as objects from a possible 804. plFiberPlate : 12 possible sky positions to use as objects from a possible 803. plFiberPlate : 21 possible sky positions to use as objects from a possible 802. plFiberPlate : 15 possible sky positions to use as objects from a possible 801. plFiberPlate : 36 possible sky positions to use as objects from a possible 800. plFiberPlate : 105 possible sky positions to use as objects from a possible 799. plFiberPlate : 82 possible sky positions to use as objects from a possible 798. plFiberPlate : 64 possible sky positions to use as objects from a possible 797. plFiberPlate : 41 possible sky positions to use as objects from a possible 796. plFiberPlate : 24 possible sky positions to use as objects from a possible 795. plFiberPlate : 35 possible sky positions to use as objects from a possible 794. plFiberPlate : 18 possible sky positions to use as objects from a possible 793. plFiberPlate : 32 possible sky positions to use as objects from a possible 792. plFiberPlate : 12 possible sky positions to use as objects from a possible 791. plFiberPlate : 63 possible sky positions to use as objects from a possible 790. plFiberPlate : 46 possible sky positions to use as objects from a possible 789. plFiberPlate : 30 possible sky positions to use as objects from a possible 788. plFiberPlate : 25 possible sky positions to use as objects from a possible 787. plFiberPlate : 25 possible sky positions to use as objects from a possible 786. plFiberPlate : 17 possible sky positions to use as objects from a possible 785. plFiberPlate : 14 possible sky positions to use as objects from a possible 784. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 706 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2382.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2383.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2383.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2384.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 28 161 2 19 114 3 16 118 4 11 147 5 13 155 6 11 121 7 11 138 8 12 169 9 11 176 10 32 236 11 29 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2243 40 6 179 19 plFiberPlate : adding spectro-photo std with objId = 2243 40 3 178 56 plFiberPlate : adding spectro-photo std with objId = 2243 40 1 178 71 plFiberPlate : adding spectro-photo std with objId = 2137 40 6 292 9 plFiberPlate : adding spectro-photo std with objId = 2137 40 6 289 13 plFiberPlate : adding spectro-photo std with objId = 2137 40 2 287 15 plFiberPlate : adding spectro-photo std with objId = 2137 40 5 286 26 plFiberPlate : adding spectro-photo std with objId = 2137 40 2 286 110 plFiberPlate : 172 possible sky positions to use as objects from a possible 840. plFiberPlate : 129 possible sky positions to use as objects from a possible 839. plFiberPlate : 80 possible sky positions to use as objects from a possible 838. plFiberPlate : 30 possible sky positions to use as objects from a possible 837. plFiberPlate : 29 possible sky positions to use as objects from a possible 836. plFiberPlate : 59 possible sky positions to use as objects from a possible 835. plFiberPlate : 77 possible sky positions to use as objects from a possible 834. plFiberPlate : 115 possible sky positions to use as objects from a possible 833. plFiberPlate : 94 possible sky positions to use as objects from a possible 832. plFiberPlate : 74 possible sky positions to use as objects from a possible 831. plFiberPlate : 33 possible sky positions to use as objects from a possible 830. plFiberPlate : 27 possible sky positions to use as objects from a possible 829. plFiberPlate : 31 possible sky positions to use as objects from a possible 828. plFiberPlate : 21 possible sky positions to use as objects from a possible 827. plFiberPlate : 14 possible sky positions to use as objects from a possible 826. plFiberPlate : 20 possible sky positions to use as objects from a possible 825. plFiberPlate : 104 possible sky positions to use as objects from a possible 824. plFiberPlate : 87 possible sky positions to use as objects from a possible 823. plFiberPlate : 61 possible sky positions to use as objects from a possible 822. plFiberPlate : 40 possible sky positions to use as objects from a possible 821. plFiberPlate : 30 possible sky positions to use as objects from a possible 820. plFiberPlate : 17 possible sky positions to use as objects from a possible 819. plFiberPlate : 33 possible sky positions to use as objects from a possible 818. plFiberPlate : 25 possible sky positions to use as objects from a possible 817. plFiberPlate : 16 possible sky positions to use as objects from a possible 816. plFiberPlate : 49 possible sky positions to use as objects from a possible 815. plFiberPlate : 37 possible sky positions to use as objects from a possible 814. plFiberPlate : 18 possible sky positions to use as objects from a possible 813. plFiberPlate : 26 possible sky positions to use as objects from a possible 812. plFiberPlate : 20 possible sky positions to use as objects from a possible 811. plFiberPlate : 28 possible sky positions to use as objects from a possible 810. plFiberPlate : 23 possible sky positions to use as objects from a possible 809. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 720 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2383.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2384.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2384.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2385.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 29 177 2 20 121 3 25 107 4 23 156 5 13 184 6 17 128 7 13 117 8 13 162 9 16 165 10 41 224 11 28 166 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 756 44 6 227 71 plFiberPlate : adding spectro-photo std with objId = 756 44 5 226 6 plFiberPlate : adding spectro-photo std with objId = 2141 40 2 57 17 plFiberPlate : adding spectro-photo std with objId = 2141 40 3 56 18 plFiberPlate : adding spectro-photo std with objId = 2141 40 1 46 56 plFiberPlate : adding spectro-photo std with objId = 2141 40 4 45 2 plFiberPlate : adding spectro-photo std with objId = 2141 40 1 44 6 plFiberPlate : adding spectro-photo std with objId = 2141 40 4 43 63 plFiberPlate : 192 possible sky positions to use as objects from a possible 846. plFiberPlate : 113 possible sky positions to use as objects from a possible 845. plFiberPlate : 76 possible sky positions to use as objects from a possible 844. plFiberPlate : 50 possible sky positions to use as objects from a possible 843. plFiberPlate : 26 possible sky positions to use as objects from a possible 842. plFiberPlate : 67 possible sky positions to use as objects from a possible 841. plFiberPlate : 55 possible sky positions to use as objects from a possible 840. plFiberPlate : 115 possible sky positions to use as objects from a possible 839. plFiberPlate : 90 possible sky positions to use as objects from a possible 838. plFiberPlate : 61 possible sky positions to use as objects from a possible 837. plFiberPlate : 44 possible sky positions to use as objects from a possible 836. plFiberPlate : 36 possible sky positions to use as objects from a possible 835. plFiberPlate : 13 possible sky positions to use as objects from a possible 834. plFiberPlate : 21 possible sky positions to use as objects from a possible 833. plFiberPlate : 25 possible sky positions to use as objects from a possible 832. plFiberPlate : 30 possible sky positions to use as objects from a possible 831. plFiberPlate : 110 possible sky positions to use as objects from a possible 830. plFiberPlate : 76 possible sky positions to use as objects from a possible 829. plFiberPlate : 50 possible sky positions to use as objects from a possible 828. plFiberPlate : 29 possible sky positions to use as objects from a possible 827. plFiberPlate : 20 possible sky positions to use as objects from a possible 826. plFiberPlate : 11 possible sky positions to use as objects from a possible 825. plFiberPlate : 25 possible sky positions to use as objects from a possible 824. plFiberPlate : 31 possible sky positions to use as objects from a possible 823. plFiberPlate : 19 possible sky positions to use as objects from a possible 822. plFiberPlate : 102 possible sky positions to use as objects from a possible 821. plFiberPlate : 73 possible sky positions to use as objects from a possible 820. plFiberPlate : 45 possible sky positions to use as objects from a possible 819. plFiberPlate : 31 possible sky positions to use as objects from a possible 818. plFiberPlate : 38 possible sky positions to use as objects from a possible 817. plFiberPlate : 22 possible sky positions to use as objects from a possible 816. plFiberPlate : 28 possible sky positions to use as objects from a possible 815. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 687 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2384.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2385.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2385.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2386.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 186 2 4 113 3 7 123 4 7 166 5 5 179 6 5 124 7 1 134 8 1 162 9 4 177 10 11 250 11 9 177 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 257 33 plFiberPlate : adding spectro-photo std with objId = 5071 40 2 251 84 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 248 20 plFiberPlate : adding spectro-photo std with objId = 5071 40 4 247 112 plFiberPlate : adding spectro-photo std with objId = 5071 40 1 246 21 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 254 26 plFiberPlate : adding spectro-photo std with objId = 5061 40 2 253 37 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 249 55 plFiberPlate : 172 possible sky positions to use as objects from a possible 871. plFiberPlate : 125 possible sky positions to use as objects from a possible 870. plFiberPlate : 82 possible sky positions to use as objects from a possible 869. plFiberPlate : 66 possible sky positions to use as objects from a possible 868. plFiberPlate : 43 possible sky positions to use as objects from a possible 867. plFiberPlate : 44 possible sky positions to use as objects from a possible 866. plFiberPlate : 62 possible sky positions to use as objects from a possible 865. plFiberPlate : 126 possible sky positions to use as objects from a possible 864. plFiberPlate : 111 possible sky positions to use as objects from a possible 863. plFiberPlate : 88 possible sky positions to use as objects from a possible 862. plFiberPlate : 49 possible sky positions to use as objects from a possible 861. plFiberPlate : 35 possible sky positions to use as objects from a possible 860. plFiberPlate : 27 possible sky positions to use as objects from a possible 859. plFiberPlate : 31 possible sky positions to use as objects from a possible 858. plFiberPlate : 35 possible sky positions to use as objects from a possible 857. plFiberPlate : 23 possible sky positions to use as objects from a possible 856. plFiberPlate : 116 possible sky positions to use as objects from a possible 855. plFiberPlate : 89 possible sky positions to use as objects from a possible 854. plFiberPlate : 75 possible sky positions to use as objects from a possible 853. plFiberPlate : 36 possible sky positions to use as objects from a possible 852. plFiberPlate : 28 possible sky positions to use as objects from a possible 851. plFiberPlate : 27 possible sky positions to use as objects from a possible 850. plFiberPlate : 24 possible sky positions to use as objects from a possible 849. plFiberPlate : 37 possible sky positions to use as objects from a possible 848. plFiberPlate : 19 possible sky positions to use as objects from a possible 847. plFiberPlate : 64 possible sky positions to use as objects from a possible 846. plFiberPlate : 49 possible sky positions to use as objects from a possible 845. plFiberPlate : 34 possible sky positions to use as objects from a possible 844. plFiberPlate : 10 possible sky positions to use as objects from a possible 843. plFiberPlate : 20 possible sky positions to use as objects from a possible 842. plFiberPlate : 19 possible sky positions to use as objects from a possible 841. plFiberPlate : 28 possible sky positions to use as objects from a possible 840. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 711 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2385.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2386.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2386.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2387.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 173 2 10 128 3 13 128 4 10 160 5 12 171 6 11 115 7 7 124 8 10 166 9 9 178 10 21 242 11 15 171 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 4469 40 5 278 7 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 206 18 plFiberPlate : adding spectro-photo std with objId = 3900 41 1 203 49 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 199 12 plFiberPlate : adding spectro-photo std with objId = 3900 41 6 196 6 plFiberPlate : adding spectro-photo std with objId = 3900 41 3 194 7 plFiberPlate : adding spectro-photo std with objId = 3900 41 5 192 87 plFiberPlate : adding spectro-photo std with objId = 4469 40 2 266 36 plFiberPlate : 174 possible sky positions to use as objects from a possible 860. plFiberPlate : 134 possible sky positions to use as objects from a possible 859. plFiberPlate : 80 possible sky positions to use as objects from a possible 858. plFiberPlate : 37 possible sky positions to use as objects from a possible 857. plFiberPlate : 34 possible sky positions to use as objects from a possible 856. plFiberPlate : 74 possible sky positions to use as objects from a possible 855. plFiberPlate : 74 possible sky positions to use as objects from a possible 854. plFiberPlate : 118 possible sky positions to use as objects from a possible 853. plFiberPlate : 77 possible sky positions to use as objects from a possible 852. plFiberPlate : 67 possible sky positions to use as objects from a possible 851. plFiberPlate : 45 possible sky positions to use as objects from a possible 850. plFiberPlate : 29 possible sky positions to use as objects from a possible 849. plFiberPlate : 27 possible sky positions to use as objects from a possible 848. plFiberPlate : 14 possible sky positions to use as objects from a possible 847. plFiberPlate : 31 possible sky positions to use as objects from a possible 846. plFiberPlate : 26 possible sky positions to use as objects from a possible 845. plFiberPlate : 99 possible sky positions to use as objects from a possible 844. plFiberPlate : 100 possible sky positions to use as objects from a possible 843. plFiberPlate : 70 possible sky positions to use as objects from a possible 842. plFiberPlate : 44 possible sky positions to use as objects from a possible 841. plFiberPlate : 21 possible sky positions to use as objects from a possible 840. plFiberPlate : 19 possible sky positions to use as objects from a possible 839. plFiberPlate : 28 possible sky positions to use as objects from a possible 838. plFiberPlate : 24 possible sky positions to use as objects from a possible 837. plFiberPlate : 18 possible sky positions to use as objects from a possible 836. plFiberPlate : 55 possible sky positions to use as objects from a possible 835. plFiberPlate : 54 possible sky positions to use as objects from a possible 834. plFiberPlate : 33 possible sky positions to use as objects from a possible 833. plFiberPlate : 26 possible sky positions to use as objects from a possible 832. plFiberPlate : 24 possible sky positions to use as objects from a possible 831. plFiberPlate : 23 possible sky positions to use as objects from a possible 830. plFiberPlate : 28 possible sky positions to use as objects from a possible 829. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 729 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2386.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2387.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2387.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2388.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 22 174 2 16 112 3 15 118 4 16 165 5 11 184 6 10 117 7 4 126 8 4 162 9 8 179 10 25 226 11 24 163 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3518 40 5 111 12 plFiberPlate : adding spectro-photo std with objId = 3518 40 5 102 40 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 245 22 plFiberPlate : adding spectro-photo std with objId = 3031 40 4 241 39 plFiberPlate : adding spectro-photo std with objId = 3031 40 1 241 57 plFiberPlate : adding spectro-photo std with objId = 3031 40 2 239 36 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 238 82 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 235 72 plFiberPlate : 184 possible sky positions to use as objects from a possible 841. plFiberPlate : 89 possible sky positions to use as objects from a possible 840. plFiberPlate : 50 possible sky positions to use as objects from a possible 839. plFiberPlate : 22 possible sky positions to use as objects from a possible 838. plFiberPlate : 70 possible sky positions to use as objects from a possible 837. plFiberPlate : 49 possible sky positions to use as objects from a possible 836. plFiberPlate : 49 possible sky positions to use as objects from a possible 835. plFiberPlate : 123 possible sky positions to use as objects from a possible 834. plFiberPlate : 79 possible sky positions to use as objects from a possible 833. plFiberPlate : 59 possible sky positions to use as objects from a possible 832. plFiberPlate : 23 possible sky positions to use as objects from a possible 831. plFiberPlate : 27 possible sky positions to use as objects from a possible 830. plFiberPlate : 26 possible sky positions to use as objects from a possible 829. plFiberPlate : 18 possible sky positions to use as objects from a possible 828. plFiberPlate : 19 possible sky positions to use as objects from a possible 827. plFiberPlate : 27 possible sky positions to use as objects from a possible 826. plFiberPlate : 139 possible sky positions to use as objects from a possible 825. plFiberPlate : 90 possible sky positions to use as objects from a possible 824. plFiberPlate : 77 possible sky positions to use as objects from a possible 823. plFiberPlate : 30 possible sky positions to use as objects from a possible 822. plFiberPlate : 13 possible sky positions to use as objects from a possible 821. plFiberPlate : 35 possible sky positions to use as objects from a possible 820. plFiberPlate : 30 possible sky positions to use as objects from a possible 819. plFiberPlate : 20 possible sky positions to use as objects from a possible 818. plFiberPlate : 16 possible sky positions to use as objects from a possible 817. plFiberPlate : 80 possible sky positions to use as objects from a possible 816. plFiberPlate : 53 possible sky positions to use as objects from a possible 815. plFiberPlate : 38 possible sky positions to use as objects from a possible 814. plFiberPlate : 15 possible sky positions to use as objects from a possible 813. plFiberPlate : 34 possible sky positions to use as objects from a possible 812. plFiberPlate : 31 possible sky positions to use as objects from a possible 811. plFiberPlate : 31 possible sky positions to use as objects from a possible 810. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 714 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2387.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2388.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2388.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2389.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 703 to list of science objects plFiberPlate : adding sky number 329 to list of science objects plFiberPlate : adding sky number 653 to list of science objects plFiberPlate : adding sky number 665 to list of science objects plFiberPlate : adding sky number 759 to list of science objects plFiberPlate : adding sky number 164 to list of science objects plFiberPlate : adding sky number 278 to list of science objects plFiberPlate : adding sky number 637 to list of science objects plFiberPlate : adding sky number 230 to list of science objects plFiberPlate : adding sky number 458 to list of science objects plFiberPlate : adding sky number 394 to list of science objects plFiberPlate : adding sky number 519 to list of science objects plFiberPlate : adding sky number 300 to list of science objects plFiberPlate : adding sky number 423 to list of science objects plFiberPlate : adding sky number 783 to list of science objects plFiberPlate : adding sky number 753 to list of science objects plFiberPlate : adding sky number 521 to list of science objects plFiberPlate : adding sky number 588 to list of science objects plFiberPlate : adding sky number 115 to list of science objects plFiberPlate : adding sky number 496 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 111 to list of science objects plFiberPlate : adding sky number 654 to list of science objects plFiberPlate : adding sky number 127 to list of science objects plFiberPlate : adding sky number 325 to list of science objects plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 808 to list of science objects plFiberPlate : adding sky number 176 to list of science objects plFiberPlate : adding sky number 413 to list of science objects plFiberPlate : adding sky number 676 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 166 2 14 117 3 14 110 4 22 155 5 16 168 6 20 114 7 14 106 8 10 151 9 21 161 10 31 228 11 22 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 756 44 5 306 31 plFiberPlate : adding spectro-photo std with objId = 756 44 2 302 47 plFiberPlate : adding spectro-photo std with objId = 2141 40 6 136 29 plFiberPlate : adding spectro-photo std with objId = 2141 40 3 136 30 plFiberPlate : adding spectro-photo std with objId = 2141 40 1 128 55 plFiberPlate : adding spectro-photo std with objId = 2141 40 1 125 2 plFiberPlate : adding spectro-photo std with objId = 2141 40 5 122 69 plFiberPlate : adding spectro-photo std with objId = 2141 40 4 122 122 plFiberPlate : 171 possible sky positions to use as objects from a possible 805. plFiberPlate : 114 possible sky positions to use as objects from a possible 804. plFiberPlate : 78 possible sky positions to use as objects from a possible 803. plFiberPlate : 58 possible sky positions to use as objects from a possible 802. plFiberPlate : 50 possible sky positions to use as objects from a possible 801. plFiberPlate : 25 possible sky positions to use as objects from a possible 800. plFiberPlate : 65 possible sky positions to use as objects from a possible 799. plFiberPlate : 112 possible sky positions to use as objects from a possible 798. plFiberPlate : 88 possible sky positions to use as objects from a possible 797. plFiberPlate : 56 possible sky positions to use as objects from a possible 796. plFiberPlate : 38 possible sky positions to use as objects from a possible 795. plFiberPlate : 19 possible sky positions to use as objects from a possible 794. plFiberPlate : 22 possible sky positions to use as objects from a possible 793. plFiberPlate : 12 possible sky positions to use as objects from a possible 792. plFiberPlate : 17 possible sky positions to use as objects from a possible 791. plFiberPlate : 40 possible sky positions to use as objects from a possible 790. plFiberPlate : 92 possible sky positions to use as objects from a possible 789. plFiberPlate : 84 possible sky positions to use as objects from a possible 788. plFiberPlate : 54 possible sky positions to use as objects from a possible 787. plFiberPlate : 30 possible sky positions to use as objects from a possible 786. plFiberPlate : 22 possible sky positions to use as objects from a possible 785. plFiberPlate : 12 possible sky positions to use as objects from a possible 784. plFiberPlate : 26 possible sky positions to use as objects from a possible 783. plFiberPlate : 15 possible sky positions to use as objects from a possible 782. plFiberPlate : 26 possible sky positions to use as objects from a possible 781. plFiberPlate : 67 possible sky positions to use as objects from a possible 780. plFiberPlate : 62 possible sky positions to use as objects from a possible 779. plFiberPlate : 37 possible sky positions to use as objects from a possible 778. plFiberPlate : 27 possible sky positions to use as objects from a possible 777. plFiberPlate : 15 possible sky positions to use as objects from a possible 776. plFiberPlate : 19 possible sky positions to use as objects from a possible 775. plFiberPlate : 13 possible sky positions to use as objects from a possible 774. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 697 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2388.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2389.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2389.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2390.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 168 2 11 122 3 12 126 4 12 160 5 5 179 6 4 120 7 3 137 8 3 167 9 4 190 10 21 249 11 16 177 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2964 40 1 228 6 plFiberPlate : adding spectro-photo std with objId = 3059 42 4 65 4 plFiberPlate : adding spectro-photo std with objId = 3059 42 6 63 67 plFiberPlate : adding spectro-photo std with objId = 3059 42 1 61 54 plFiberPlate : adding spectro-photo std with objId = 3059 42 6 57 51 plFiberPlate : adding spectro-photo std with objId = 3059 42 4 56 17 plFiberPlate : adding spectro-photo std with objId = 3059 42 3 54 28 plFiberPlate : adding spectro-photo std with objId = 3059 42 4 51 66 plFiberPlate : 185 possible sky positions to use as objects from a possible 878. plFiberPlate : 152 possible sky positions to use as objects from a possible 877. plFiberPlate : 104 possible sky positions to use as objects from a possible 876. plFiberPlate : 46 possible sky positions to use as objects from a possible 875. plFiberPlate : 59 possible sky positions to use as objects from a possible 874. plFiberPlate : 33 possible sky positions to use as objects from a possible 873. plFiberPlate : 73 possible sky positions to use as objects from a possible 872. plFiberPlate : 113 possible sky positions to use as objects from a possible 871. plFiberPlate : 85 possible sky positions to use as objects from a possible 870. plFiberPlate : 68 possible sky positions to use as objects from a possible 869. plFiberPlate : 36 possible sky positions to use as objects from a possible 868. plFiberPlate : 29 possible sky positions to use as objects from a possible 867. plFiberPlate : 17 possible sky positions to use as objects from a possible 866. plFiberPlate : 21 possible sky positions to use as objects from a possible 865. plFiberPlate : 33 possible sky positions to use as objects from a possible 864. plFiberPlate : 36 possible sky positions to use as objects from a possible 863. plFiberPlate : 131 possible sky positions to use as objects from a possible 862. plFiberPlate : 96 possible sky positions to use as objects from a possible 861. plFiberPlate : 52 possible sky positions to use as objects from a possible 860. plFiberPlate : 22 possible sky positions to use as objects from a possible 859. plFiberPlate : 19 possible sky positions to use as objects from a possible 858. plFiberPlate : 30 possible sky positions to use as objects from a possible 857. plFiberPlate : 14 possible sky positions to use as objects from a possible 856. plFiberPlate : 23 possible sky positions to use as objects from a possible 855. plFiberPlate : 24 possible sky positions to use as objects from a possible 854. plFiberPlate : 57 possible sky positions to use as objects from a possible 853. plFiberPlate : 53 possible sky positions to use as objects from a possible 852. plFiberPlate : 34 possible sky positions to use as objects from a possible 851. plFiberPlate : 23 possible sky positions to use as objects from a possible 850. plFiberPlate : 43 possible sky positions to use as objects from a possible 849. plFiberPlate : 27 possible sky positions to use as objects from a possible 848. plFiberPlate : 34 possible sky positions to use as objects from a possible 847. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 706 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2389.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2390.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2390.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2391.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 173 2 7 122 3 7 131 4 8 181 5 5 185 6 3 121 7 2 138 8 4 167 9 1 183 10 14 238 11 9 171 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5071 40 3 341 50 plFiberPlate : adding spectro-photo std with objId = 5071 40 6 329 25 plFiberPlate : adding spectro-photo std with objId = 5061 40 4 338 49 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 337 63 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 334 39 plFiberPlate : adding spectro-photo std with objId = 5061 40 6 333 8 plFiberPlate : adding spectro-photo std with objId = 5061 40 1 333 80 plFiberPlate : adding spectro-photo std with objId = 5061 40 3 330 82 plFiberPlate : 189 possible sky positions to use as objects from a possible 873. plFiberPlate : 130 possible sky positions to use as objects from a possible 872. plFiberPlate : 70 possible sky positions to use as objects from a possible 871. plFiberPlate : 58 possible sky positions to use as objects from a possible 870. plFiberPlate : 45 possible sky positions to use as objects from a possible 869. plFiberPlate : 38 possible sky positions to use as objects from a possible 868. plFiberPlate : 50 possible sky positions to use as objects from a possible 867. plFiberPlate : 125 possible sky positions to use as objects from a possible 866. plFiberPlate : 90 possible sky positions to use as objects from a possible 865. plFiberPlate : 62 possible sky positions to use as objects from a possible 864. plFiberPlate : 34 possible sky positions to use as objects from a possible 863. plFiberPlate : 22 possible sky positions to use as objects from a possible 862. plFiberPlate : 32 possible sky positions to use as objects from a possible 861. plFiberPlate : 17 possible sky positions to use as objects from a possible 860. plFiberPlate : 18 possible sky positions to use as objects from a possible 859. plFiberPlate : 26 possible sky positions to use as objects from a possible 858. plFiberPlate : 133 possible sky positions to use as objects from a possible 857. plFiberPlate : 84 possible sky positions to use as objects from a possible 856. plFiberPlate : 54 possible sky positions to use as objects from a possible 855. plFiberPlate : 30 possible sky positions to use as objects from a possible 854. plFiberPlate : 15 possible sky positions to use as objects from a possible 853. plFiberPlate : 26 possible sky positions to use as objects from a possible 852. plFiberPlate : 33 possible sky positions to use as objects from a possible 851. plFiberPlate : 16 possible sky positions to use as objects from a possible 850. plFiberPlate : 25 possible sky positions to use as objects from a possible 849. plFiberPlate : 69 possible sky positions to use as objects from a possible 848. plFiberPlate : 53 possible sky positions to use as objects from a possible 847. plFiberPlate : 41 possible sky positions to use as objects from a possible 846. plFiberPlate : 31 possible sky positions to use as objects from a possible 845. plFiberPlate : 30 possible sky positions to use as objects from a possible 844. plFiberPlate : 22 possible sky positions to use as objects from a possible 843. plFiberPlate : 29 possible sky positions to use as objects from a possible 842. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 706 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2390.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2391.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2391.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2392.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 534 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 199 2 11 121 3 12 120 4 13 160 5 3 177 6 4 117 7 8 135 8 4 175 9 9 171 10 20 234 11 13 172 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 8 spectro-photo stds in, 8 out plFiberPlate : 182 possible sky positions to use as objects from a possible 872. plFiberPlate : 142 possible sky positions to use as objects from a possible 871. plFiberPlate : 98 possible sky positions to use as objects from a possible 870. plFiberPlate : 37 possible sky positions to use as objects from a possible 869. plFiberPlate : 44 possible sky positions to use as objects from a possible 868. plFiberPlate : 52 possible sky positions to use as objects from a possible 867. plFiberPlate : 88 possible sky positions to use as objects from a possible 866. plFiberPlate : 113 possible sky positions to use as objects from a possible 865. plFiberPlate : 80 possible sky positions to use as objects from a possible 864. plFiberPlate : 60 possible sky positions to use as objects from a possible 863. plFiberPlate : 31 possible sky positions to use as objects from a possible 862. plFiberPlate : 20 possible sky positions to use as objects from a possible 861. plFiberPlate : 34 possible sky positions to use as objects from a possible 860. plFiberPlate : 17 possible sky positions to use as objects from a possible 859. plFiberPlate : 27 possible sky positions to use as objects from a possible 858. plFiberPlate : 36 possible sky positions to use as objects from a possible 857. plFiberPlate : 115 possible sky positions to use as objects from a possible 856. plFiberPlate : 100 possible sky positions to use as objects from a possible 855. plFiberPlate : 62 possible sky positions to use as objects from a possible 854. plFiberPlate : 35 possible sky positions to use as objects from a possible 853. plFiberPlate : 22 possible sky positions to use as objects from a possible 852. plFiberPlate : 22 possible sky positions to use as objects from a possible 851. plFiberPlate : 24 possible sky positions to use as objects from a possible 850. plFiberPlate : 27 possible sky positions to use as objects from a possible 849. plFiberPlate : 24 possible sky positions to use as objects from a possible 848. plFiberPlate : 63 possible sky positions to use as objects from a possible 847. plFiberPlate : 53 possible sky positions to use as objects from a possible 846. plFiberPlate : 31 possible sky positions to use as objects from a possible 845. plFiberPlate : 25 possible sky positions to use as objects from a possible 844. plFiberPlate : 36 possible sky positions to use as objects from a possible 843. plFiberPlate : 31 possible sky positions to use as objects from a possible 842. plFiberPlate : 23 possible sky positions to use as objects from a possible 841. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 706 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2391.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2392.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2392.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2393.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 18 179 2 8 136 3 16 110 4 20 149 5 4 189 6 1 131 7 3 117 8 2 169 9 1 183 10 22 236 11 17 169 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3525 40 1 95 10 plFiberPlate : adding spectro-photo std with objId = 3525 40 3 85 47 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 327 5 plFiberPlate : adding spectro-photo std with objId = 3031 40 6 320 31 plFiberPlate : adding spectro-photo std with objId = 3031 40 4 320 38 plFiberPlate : adding spectro-photo std with objId = 3031 40 3 320 16 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 316 2 plFiberPlate : adding spectro-photo std with objId = 3031 40 5 317 127 plFiberPlate : 181 possible sky positions to use as objects from a possible 871. plFiberPlate : 142 possible sky positions to use as objects from a possible 870. plFiberPlate : 74 possible sky positions to use as objects from a possible 869. plFiberPlate : 58 possible sky positions to use as objects from a possible 868. plFiberPlate : 32 possible sky positions to use as objects from a possible 867. plFiberPlate : 56 possible sky positions to use as objects from a possible 866. plFiberPlate : 54 possible sky positions to use as objects from a possible 865. plFiberPlate : 116 possible sky positions to use as objects from a possible 864. plFiberPlate : 86 possible sky positions to use as objects from a possible 863. plFiberPlate : 56 possible sky positions to use as objects from a possible 862. plFiberPlate : 27 possible sky positions to use as objects from a possible 861. plFiberPlate : 20 possible sky positions to use as objects from a possible 860. plFiberPlate : 22 possible sky positions to use as objects from a possible 859. plFiberPlate : 23 possible sky positions to use as objects from a possible 858. plFiberPlate : 17 possible sky positions to use as objects from a possible 857. plFiberPlate : 25 possible sky positions to use as objects from a possible 856. plFiberPlate : 133 possible sky positions to use as objects from a possible 855. plFiberPlate : 95 possible sky positions to use as objects from a possible 854. plFiberPlate : 79 possible sky positions to use as objects from a possible 853. plFiberPlate : 50 possible sky positions to use as objects from a possible 852. plFiberPlate : 25 possible sky positions to use as objects from a possible 851. plFiberPlate : 45 possible sky positions to use as objects from a possible 850. plFiberPlate : 34 possible sky positions to use as objects from a possible 849. plFiberPlate : 25 possible sky positions to use as objects from a possible 848. plFiberPlate : 23 possible sky positions to use as objects from a possible 847. plFiberPlate : 88 possible sky positions to use as objects from a possible 846. plFiberPlate : 69 possible sky positions to use as objects from a possible 845. plFiberPlate : 36 possible sky positions to use as objects from a possible 844. plFiberPlate : 33 possible sky positions to use as objects from a possible 843. plFiberPlate : 19 possible sky positions to use as objects from a possible 842. plFiberPlate : 13 possible sky positions to use as objects from a possible 841. plFiberPlate : 35 possible sky positions to use as objects from a possible 840. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 720 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2392.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2393.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2393.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2394.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 20 175 2 16 112 3 12 131 4 13 168 5 3 190 6 3 127 7 3 126 8 7 168 9 6 180 10 26 239 11 19 176 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 2987 40 3 104 25 plFiberPlate : adding spectro-photo std with objId = 2987 40 2 97 42 plFiberPlate : adding spectro-photo std with objId = 2987 40 2 94 18 plFiberPlate : adding spectro-photo std with objId = 2987 40 5 93 46 plFiberPlate : adding spectro-photo std with objId = 2243 40 5 290 44 plFiberPlate : adding spectro-photo std with objId = 2243 40 6 284 27 plFiberPlate : adding spectro-photo std with objId = 2243 40 1 284 66 plFiberPlate : adding spectro-photo std with objId = 2243 40 3 276 45 plFiberPlate : 182 possible sky positions to use as objects from a possible 878. plFiberPlate : 130 possible sky positions to use as objects from a possible 877. plFiberPlate : 97 possible sky positions to use as objects from a possible 876. plFiberPlate : 48 possible sky positions to use as objects from a possible 875. plFiberPlate : 49 possible sky positions to use as objects from a possible 874. plFiberPlate : 41 possible sky positions to use as objects from a possible 873. plFiberPlate : 85 possible sky positions to use as objects from a possible 872. plFiberPlate : 126 possible sky positions to use as objects from a possible 871. plFiberPlate : 99 possible sky positions to use as objects from a possible 870. plFiberPlate : 66 possible sky positions to use as objects from a possible 869. plFiberPlate : 38 possible sky positions to use as objects from a possible 868. plFiberPlate : 17 possible sky positions to use as objects from a possible 867. plFiberPlate : 34 possible sky positions to use as objects from a possible 866. plFiberPlate : 21 possible sky positions to use as objects from a possible 865. plFiberPlate : 42 possible sky positions to use as objects from a possible 864. plFiberPlate : 19 possible sky positions to use as objects from a possible 863. plFiberPlate : 102 possible sky positions to use as objects from a possible 862. plFiberPlate : 63 possible sky positions to use as objects from a possible 861. plFiberPlate : 54 possible sky positions to use as objects from a possible 860. plFiberPlate : 23 possible sky positions to use as objects from a possible 859. plFiberPlate : 16 possible sky positions to use as objects from a possible 858. plFiberPlate : 11 possible sky positions to use as objects from a possible 857. plFiberPlate : 31 possible sky positions to use as objects from a possible 856. plFiberPlate : 24 possible sky positions to use as objects from a possible 855. plFiberPlate : 16 possible sky positions to use as objects from a possible 854. plFiberPlate : 72 possible sky positions to use as objects from a possible 853. plFiberPlate : 61 possible sky positions to use as objects from a possible 852. plFiberPlate : 37 possible sky positions to use as objects from a possible 851. plFiberPlate : 28 possible sky positions to use as objects from a possible 850. plFiberPlate : 31 possible sky positions to use as objects from a possible 849. plFiberPlate : 22 possible sky positions to use as objects from a possible 848. plFiberPlate : 23 possible sky positions to use as objects from a possible 847. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 723 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2393.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2394.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2394.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2395.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 21 169 2 14 116 3 13 125 4 21 162 5 23 171 6 10 118 7 13 129 8 14 163 9 14 175 10 27 237 11 22 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 1412 40 4 131 4 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 337 84 plFiberPlate : adding spectro-photo std with objId = 1350 40 6 334 38 plFiberPlate : adding spectro-photo std with objId = 1350 40 2 334 13 plFiberPlate : adding spectro-photo std with objId = 1350 40 5 332 34 plFiberPlate : adding spectro-photo std with objId = 1350 40 1 332 79 plFiberPlate : adding spectro-photo std with objId = 1350 40 4 326 95 plFiberPlate : adding spectro-photo std with objId = 1350 40 3 326 136 plFiberPlate : 192 possible sky positions to use as objects from a possible 837. plFiberPlate : 129 possible sky positions to use as objects from a possible 836. plFiberPlate : 73 possible sky positions to use as objects from a possible 835. plFiberPlate : 58 possible sky positions to use as objects from a possible 834. plFiberPlate : 45 possible sky positions to use as objects from a possible 833. plFiberPlate : 41 possible sky positions to use as objects from a possible 832. plFiberPlate : 57 possible sky positions to use as objects from a possible 831. plFiberPlate : 121 possible sky positions to use as objects from a possible 830. plFiberPlate : 88 possible sky positions to use as objects from a possible 829. plFiberPlate : 75 possible sky positions to use as objects from a possible 828. plFiberPlate : 53 possible sky positions to use as objects from a possible 827. plFiberPlate : 21 possible sky positions to use as objects from a possible 826. plFiberPlate : 11 possible sky positions to use as objects from a possible 825. plFiberPlate : 22 possible sky positions to use as objects from a possible 824. plFiberPlate : 25 possible sky positions to use as objects from a possible 823. plFiberPlate : 24 possible sky positions to use as objects from a possible 822. plFiberPlate : 54 possible sky positions to use as objects from a possible 821. plFiberPlate : 70 possible sky positions to use as objects from a possible 820. plFiberPlate : 44 possible sky positions to use as objects from a possible 819. plFiberPlate : 23 possible sky positions to use as objects from a possible 818. plFiberPlate : 9 possible sky positions to use as objects from a possible 817. plFiberPlate : 13 possible sky positions to use as objects from a possible 816. plFiberPlate : 14 possible sky positions to use as objects from a possible 815. plFiberPlate : 23 possible sky positions to use as objects from a possible 814. plFiberPlate : 36 possible sky positions to use as objects from a possible 813. plFiberPlate : 64 possible sky positions to use as objects from a possible 812. plFiberPlate : 60 possible sky positions to use as objects from a possible 811. plFiberPlate : 32 possible sky positions to use as objects from a possible 810. plFiberPlate : 16 possible sky positions to use as objects from a possible 809. plFiberPlate : 18 possible sky positions to use as objects from a possible 808. plFiberPlate : 20 possible sky positions to use as objects from a possible 807. plFiberPlate : 39 possible sky positions to use as objects from a possible 806. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 733 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2394.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2395.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2395.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2396.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 174 2 13 127 3 12 119 4 19 152 5 15 189 6 8 132 7 11 115 8 12 159 9 16 186 10 28 233 11 14 166 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 756 44 6 384 84 plFiberPlate : adding spectro-photo std with objId = 756 44 3 383 73 plFiberPlate : adding spectro-photo std with objId = 756 44 2 382 63 plFiberPlate : adding spectro-photo std with objId = 752 40 1 201 12 plFiberPlate : adding spectro-photo std with objId = 752 40 6 200 19 plFiberPlate : adding spectro-photo std with objId = 752 40 4 200 10 plFiberPlate : adding spectro-photo std with objId = 752 40 1 198 61 plFiberPlate : adding spectro-photo std with objId = 752 40 4 194 21 plFiberPlate : 184 possible sky positions to use as objects from a possible 844. plFiberPlate : 128 possible sky positions to use as objects from a possible 843. plFiberPlate : 74 possible sky positions to use as objects from a possible 842. plFiberPlate : 36 possible sky positions to use as objects from a possible 841. plFiberPlate : 71 possible sky positions to use as objects from a possible 840. plFiberPlate : 49 possible sky positions to use as objects from a possible 839. plFiberPlate : 62 possible sky positions to use as objects from a possible 838. plFiberPlate : 103 possible sky positions to use as objects from a possible 837. plFiberPlate : 81 possible sky positions to use as objects from a possible 836. plFiberPlate : 57 possible sky positions to use as objects from a possible 835. plFiberPlate : 22 possible sky positions to use as objects from a possible 834. plFiberPlate : 20 possible sky positions to use as objects from a possible 833. plFiberPlate : 26 possible sky positions to use as objects from a possible 832. plFiberPlate : 17 possible sky positions to use as objects from a possible 831. plFiberPlate : 21 possible sky positions to use as objects from a possible 830. plFiberPlate : 30 possible sky positions to use as objects from a possible 829. plFiberPlate : 126 possible sky positions to use as objects from a possible 828. plFiberPlate : 86 possible sky positions to use as objects from a possible 827. plFiberPlate : 65 possible sky positions to use as objects from a possible 826. plFiberPlate : 39 possible sky positions to use as objects from a possible 825. plFiberPlate : 19 possible sky positions to use as objects from a possible 824. plFiberPlate : 27 possible sky positions to use as objects from a possible 823. plFiberPlate : 30 possible sky positions to use as objects from a possible 822. plFiberPlate : 20 possible sky positions to use as objects from a possible 821. plFiberPlate : 25 possible sky positions to use as objects from a possible 820. plFiberPlate : 84 possible sky positions to use as objects from a possible 819. plFiberPlate : 55 possible sky positions to use as objects from a possible 818. plFiberPlate : 21 possible sky positions to use as objects from a possible 817. plFiberPlate : 15 possible sky positions to use as objects from a possible 816. plFiberPlate : 22 possible sky positions to use as objects from a possible 815. plFiberPlate : 22 possible sky positions to use as objects from a possible 814. plFiberPlate : 25 possible sky positions to use as objects from a possible 813. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 682 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2395.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2396.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2396.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.01.2/plPlugMapP-2397.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 92 64 2 84 59 3 68 77 4 45 74 5 64 57 6 60 52 7 71 46 8 96 52 9 74 61 10 130 104 11 102 66 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5817 40 5 247 186 plFiberPlate : adding spectro-photo std with objId = 5817 40 5 247 150 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 240 584 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 240 473 plFiberPlate : adding spectro-photo std with objId = 5817 40 5 236 628 plFiberPlate : adding spectro-photo std with objId = 5817 40 6 235 472 plFiberPlate : adding spectro-photo std with objId = 5817 40 4 234 31 plFiberPlate : adding spectro-photo std with objId = 5817 40 4 233 483 plFiberPlate : 83 possible sky positions to use as objects from a possible 333. plFiberPlate : 55 possible sky positions to use as objects from a possible 332. plFiberPlate : 34 possible sky positions to use as objects from a possible 331. plFiberPlate : 22 possible sky positions to use as objects from a possible 330. plFiberPlate : 16 possible sky positions to use as objects from a possible 329. plFiberPlate : 17 possible sky positions to use as objects from a possible 328. plFiberPlate : 28 possible sky positions to use as objects from a possible 327. plFiberPlate : 38 possible sky positions to use as objects from a possible 326. plFiberPlate : 29 possible sky positions to use as objects from a possible 325. plFiberPlate : 19 possible sky positions to use as objects from a possible 324. plFiberPlate : 10 possible sky positions to use as objects from a possible 323. plFiberPlate : 6 possible sky positions to use as objects from a possible 322. plFiberPlate : 14 possible sky positions to use as objects from a possible 321. plFiberPlate : 6 possible sky positions to use as objects from a possible 320. plFiberPlate : 9 possible sky positions to use as objects from a possible 319. plFiberPlate : 8 possible sky positions to use as objects from a possible 318. plFiberPlate : 35 possible sky positions to use as objects from a possible 317. plFiberPlate : 27 possible sky positions to use as objects from a possible 316. plFiberPlate : 14 possible sky positions to use as objects from a possible 315. plFiberPlate : 8 possible sky positions to use as objects from a possible 314. plFiberPlate : 5 possible sky positions to use as objects from a possible 313. plFiberPlate : 7 possible sky positions to use as objects from a possible 312. plFiberPlate : 8 possible sky positions to use as objects from a possible 311. plFiberPlate : 8 possible sky positions to use as objects from a possible 310. plFiberPlate : 2 possible sky positions to use as objects from a possible 309. plFiberPlate : 20 possible sky positions to use as objects from a possible 308. plFiberPlate : 17 possible sky positions to use as objects from a possible 307. plFiberPlate : 12 possible sky positions to use as objects from a possible 306. plFiberPlate : 5 possible sky positions to use as objects from a possible 305. plFiberPlate : 8 possible sky positions to use as objects from a possible 304. plFiberPlate : 9 possible sky positions to use as objects from a possible 303. plFiberPlate : 8 possible sky positions to use as objects from a possible 302. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 827 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2396.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2397.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.01.2/plOverlay-2397.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Fri Jan 6 16:24:27 CST 2006 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_190/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_190/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 20 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 115 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2378.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2378.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2378.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 108 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2379.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2379.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2379.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 76 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2380.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2380.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2380.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 41 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2381.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2381.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.3319,9.8793) and (-2.34,12.18) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2381.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 87 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2382.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2382.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2382.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 44 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2383.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2383.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2383.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 58 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2384.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2384.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2384.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 25 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2385.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2385.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2385.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 49 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2386.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2386.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.9248,-9.5036) and (-5.22,-11.37) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2386.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 67 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2387.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2387.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.4885,6.3062) and (-12.42,1.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2387.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 52 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2388.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2388.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2388.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 35 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2389.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2389.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2389.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 44 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2390.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2390.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2390.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 44 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2391.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2391.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2391.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 44 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2392.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2392.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2392.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 58 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2393.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2393.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2393.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 61 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2394.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2394.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2394.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 71 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2395.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.5532,-4.8922) and (-12.20,-2.56) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2395.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.2739,-9.6162) and (0.64,-12.27) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2395.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 20 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2396.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2396.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2396.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 165 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2397.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2397.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.01.2/plFanuc-2397.par plMakeFanucCodes : temperature difference 22.7 deg C plMakeFanucCodes : using a temp expansion factor of 0.00048215 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Fri Jan 6 16:25:27 CST 2006 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_190/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_190/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xaa7574c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 20 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2378 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 777 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2379 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 770 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2380 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 738 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2381 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 703 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2382 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 749 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2383 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 706 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2384 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 720 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2385 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 687 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2386 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 711 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2387 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 729 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2388 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 714 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2389 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 697 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2390 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 706 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2391 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 706 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2392 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 706 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2393 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 720 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2394 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 723 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2395 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 733 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2396 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 682 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2397 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs -2.7 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 827 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Fri Jan 6 16:25:51 CST 2006 Begin running "plateEnder dr2006.01.2 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_16/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v17_190/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v17_190/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_18/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2006.01.2 -morePipes 1" failed. PS: Read file for stderr output of this job.