Sender: LSF System Subject: Job 93526: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Tue Apr 4 17:00:28 2006 Results reported at Tue Apr 4 17:08:06 2006 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2006.04.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 327.43 sec. Max Memory : 12 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Tue Apr 4 17:01:10 CDT 2006 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Tue Apr 4 17:01:50 CDT 2006 PATH = /fnal/ups/prd/fftw/v1_6Linux-2-4-2-3-2/bin:/fnal/ups/prd/fsao/v3_14aLinux-2-4-2-3-2/bin:/fnal/ups/prd/tclx/v7_4adfa_2Linux-2-4-2-3-2/bin:/fnal/ups/prd/tk/v4_0dfaLinux-2-4-2-3-2/bin:/fnal/ups/prd/tcl/v7_4dfaLinux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/fnal/ups/prd/imagemagick/v6_2_6_1Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/fnal/ups/prd/encp/v3_5aLinux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86/bin:/sdss/ups/prd/gcc/v2_95_2/Linux-2-4/bin:/sdss/ups/prd/dddebugger/v3_1_2/Linux/bin:/sdss/ups/prd/gnuplot/v3_5/Linux-2/bin:/sdss/ups/prd/gdb/v4_17/Linux-2/bin:/sdss/ups/prd/blt/v1_9/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/tiling/v3_30/Linux-2-4-2-3-2/bin:/sdss/ups/prd/target/v6_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdb/v4_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/basicSch/v4_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photoSch/v6_0/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ts/v6_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xpa/v2_1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/fnal/ups/prd/jhead/v2_3/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/fnal/ups/prd/jpeg/v6_0bLinux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v18_21/NULL/bin:/home/s1/sdssdp/bin:/fnal/ups/prd/pgplot/v5_2_2Linux-2-4-2-3-2/dst:/fnal/ups/prd/fpgplot/v5_2_2Linux-2-4-2-3-2/bin:/fnal/ups/prd/pgplot/v5_2_2Linux-2-4-2-3-2/dst:/fnal/ups/prd/sdsstools/v4_27Linux-2-4-2-3-2/bin:/fnal/ups/prd/ftcl/v3_6Linux-2-4-2-3-2/bin:/fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2/bin:/fnal/ups/prd/sdssmath/v5_15Linux-2-4-2-3-2/bin:/fnal/ups/prd/astrotools/v5_21Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Tue Apr 4 17:01:50 CDT 2006 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/fnal/ups/prd/astrotools/v5_21Linux-2-4-2-3-2 BASICSCH_DIR=/sdss/ups/prd/basicSch/v4_0/Linux-2-4-2-3-2 BLT_DIR=/sdss/ups/prd/blt/v1_9/Linux-2-4-2-3-2 DDDEBUGGER_DIR=/sdss/ups/prd/dddebugger/v3_1_2/Linux DERVISH_DIR=/fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v18_21/NULL DS9_DIR=/sdss/ups/prd/ds9/v3_0_3/Linux-2-4-2-3-2 DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/fnal/ups/prd/encp/v3_5aLinux-2-4-2-3-2 FFTW_DIR=/fnal/ups/prd/fftw/v1_6Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/fnal/ups/prd/fpgplot/v5_2_2Linux-2-4-2-3-2 FSAO_DIR=/fnal/ups/prd/fsao/v3_14aLinux-2-4-2-3-2 FSLALIB_DIR=/fnal/ups/prd/fslalib/v2_1_2bLinux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/fnal/ups/prd/ftcl/v3_6Linux-2-4-2-3-2 GCC_DIR=/sdss/ups/prd/gcc/v2_95_2/Linux-2-4 GDB_DIR=/sdss/ups/prd/gdb/v4_17/Linux-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 GNUPLOT_DIR=/sdss/ups/prd/gnuplot/v3_5/Linux-2 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/fnal/ups/prd/imagemagick/v6_2_6_1Linux-2-4-2-3-2 INT_DIR=/fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/fnal/ups/prd/jhead/v2_3 JPEG_DIR=/fnal/ups/prd/jpeg/v6_0bLinux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect KENTOOLS_DIR=/sdss/ups/prd/kentools/v2_6/Linux-2-4-2-3-2 LAPACK_DIR=/fnal/ups/prd/lapack/v3_0_2Linux-2-4-2-3-2 LIBFITS_DIR=/fnal/ups/prd/libfits/v2_5Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL OBJECTIVITY_DIR=/sdss/ups/prd/objectivity/v6_0_3/Linux/linux86 PGPLOT_DIR=/fnal/ups/prd/pgplot/v5_2_2Linux-2-4-2-3-2 PHOTOSCH_DIR=/sdss/ups/prd/photoSch/v6_0/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDB_DIR=/sdss/ups/prd/sdb/v4_0/Linux-2-4-2-3-2 SDSSMATH_DIR=/fnal/ups/prd/sdssmath/v5_15Linux-2-4-2-3-2 SDSSTOOLS_DIR=/fnal/ups/prd/sdsstools/v4_27Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/fnal/ups/prd/slalib/v2_1_2bLinux-2-4-2-3-2 SLATEC_DIR=/fnal/ups/prd/slatec/v0_9bLinux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/fnal/ups/prd/specialStripes/v1_3 SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TARGET_DIR=/sdss/ups/prd/target/v6_0/Linux-2-4-2-3-2 TCLX_DIR=/fnal/ups/prd/tclx/v7_4adfa_2Linux-2-4-2-3-2 TCL_DIR=/fnal/ups/prd/tcl/v7_4dfaLinux-2-4-2-3-2 TILING_DIR=/sdss/ups/prd/tiling/v3_30/Linux-2-4-2-3-2 TK_DIR=/fnal/ups/prd/tk/v4_0dfaLinux-2-4-2-3-2 TS_DIR=/sdss/ups/prd/ts/v6_4/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL XPA_DIR=/sdss/ups/prd/xpa/v2_1_6/Linux-2-4-2-3-2 --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Tue Apr 4 17:01:53 CDT 2006 Begin running plate --------------------------------------------------------------- Tue Apr 4 17:01:54 CDT 2006 Begin running "makePlates -verbose=2" Executing commands in /fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_21/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_21/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /fnal/ups/prd/astrotools/v5_21Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x9e6c74c makePlates : beginning loop over plObs chain; makePlates : making 39 plates makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1735.par makePlates : plateInfo struct for plate 2477 : (h4).mjd 53852 (h4).raCen 160.4164 (h4).decCen 22.92124 (h4).haCen -25 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 160.416 22.921 160.416 24.421 plMakePlateFromTile : mjd of obs : 53852.484328 Observed HA/dec of plate center, fiducial point (deg) : -25.002 22.893 -25.003 24.393 The rotation angle of the fid. point is 60.356189 plMakePlateFromTile : beginning loop over 1307 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1745.par makePlates : plateInfo struct for plate 2478 : (h4).mjd 53852 (h4).raCen 161 (h4).decCen 20.66479 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.000 20.665 161.000 22.165 plMakePlateFromTile : mjd of obs : 53852.483171 Observed HA/dec of plate center, fiducial point (deg) : -26.002 20.637 -26.003 22.137 The rotation angle of the fid. point is 56.908402 plMakePlateFromTile : beginning loop over 1317 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1755.par makePlates : plateInfo struct for plate 2479 : (h4).mjd 53852 (h4).raCen 161.3922 (h4).decCen 18.4105 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.392 18.410 161.392 19.910 plMakePlateFromTile : mjd of obs : 53852.484256 Observed HA/dec of plate center, fiducial point (deg) : -26.002 18.383 -26.003 19.883 The rotation angle of the fid. point is 53.241991 plMakePlateFromTile : beginning loop over 1343 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1726.par makePlates : plateInfo struct for plate 2480 : (h4).mjd 53852 (h4).raCen 161.516 (h4).decCen 16.04515 (h4).haCen -26 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 161.516 16.045 161.516 17.545 plMakePlateFromTile : mjd of obs : 53852.484597 Observed HA/dec of plate center, fiducial point (deg) : -26.002 16.018 -26.003 17.518 The rotation angle of the fid. point is 49.780256 plMakePlateFromTile : beginning loop over 1297 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1736.par makePlates : plateInfo struct for plate 2481 : (h4).mjd 53852 (h4).raCen 162.7091 (h4).decCen 23.33449 (h4).haCen -27 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.709 23.334 162.709 24.834 plMakePlateFromTile : mjd of obs : 53852.485136 Observed HA/dec of plate center, fiducial point (deg) : -27.002 23.306 -27.003 24.805 The rotation angle of the fid. point is 62.260559 plMakePlateFromTile : beginning loop over 1289 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1756.par makePlates : plateInfo struct for plate 2482 : (h4).mjd 53852 (h4).raCen 163.228 (h4).decCen 18.69658 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.228 18.697 163.228 20.197 plMakePlateFromTile : mjd of obs : 53852.483799 Observed HA/dec of plate center, fiducial point (deg) : -28.002 18.669 -28.003 20.168 The rotation angle of the fid. point is 55.120607 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1727.par makePlates : plateInfo struct for plate 2483 : (h4).mjd 53852 (h4).raCen 163.3322 (h4).decCen 16.31941 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.332 16.319 163.332 17.819 plMakePlateFromTile : mjd of obs : 53852.484086 Observed HA/dec of plate center, fiducial point (deg) : -28.002 16.292 -28.003 17.792 The rotation angle of the fid. point is 51.743579 plMakePlateFromTile : beginning loop over 1347 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1746.par makePlates : plateInfo struct for plate 2484 : (h4).mjd 53852 (h4).raCen 163.4065 (h4).decCen 21.09861 (h4).haCen -28 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 163.406 21.099 163.406 22.599 plMakePlateFromTile : mjd of obs : 53852.484295 Observed HA/dec of plate center, fiducial point (deg) : -28.002 21.070 -28.003 22.570 The rotation angle of the fid. point is 58.890822 plMakePlateFromTile : beginning loop over 1319 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1757.par makePlates : plateInfo struct for plate 2485 : (h4).mjd 53852 (h4).raCen 165.0238 (h4).decCen 18.63824 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.024 18.638 165.024 20.138 plMakePlateFromTile : mjd of obs : 53852.483231 Observed HA/dec of plate center, fiducial point (deg) : -30.002 18.610 -30.003 20.110 The rotation angle of the fid. point is 56.278384 plMakePlateFromTile : beginning loop over 1349 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1737.par makePlates : plateInfo struct for plate 2486 : (h4).mjd 53852 (h4).raCen 165.0987 (h4).decCen 23.68158 (h4).haCen -30 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.099 23.682 165.099 25.182 plMakePlateFromTile : mjd of obs : 53852.483442 Observed HA/dec of plate center, fiducial point (deg) : -30.002 23.652 -30.003 25.152 The rotation angle of the fid. point is 64.146608 plMakePlateFromTile : beginning loop over 1298 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1728.par makePlates : plateInfo struct for plate 2487 : (h4).mjd 53852 (h4).raCen 165.624 (h4).decCen 16.50987 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.624 16.510 165.624 18.010 plMakePlateFromTile : mjd of obs : 53852.526457 Observed HA/dec of plate center, fiducial point (deg) : -15.002 16.481 -15.003 17.981 The rotation angle of the fid. point is 37.016844 plMakePlateFromTile : beginning loop over 1364 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1747.par makePlates : plateInfo struct for plate 2488 : (h4).mjd 53852 (h4).raCen 165.748 (h4).decCen 21.28346 (h4).haCen -15 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 165.748 21.283 165.748 22.783 plMakePlateFromTile : mjd of obs : 53852.526804 Observed HA/dec of plate center, fiducial point (deg) : -15.002 21.254 -15.003 22.753 The rotation angle of the fid. point is 46.008372 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1738.par makePlates : plateInfo struct for plate 2489 : (h4).mjd 53852 (h4).raCen 167.1663 (h4).decCen 23.93467 (h4).haCen -17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.166 23.935 167.166 25.435 plMakePlateFromTile : mjd of obs : 53852.525192 Observed HA/dec of plate center, fiducial point (deg) : -17.002 23.904 -17.003 25.404 The rotation angle of the fid. point is 55.477693 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1758.par makePlates : plateInfo struct for plate 2490 : (h4).mjd 53852 (h4).raCen 167.5464 (h4).decCen 19.07397 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.546 19.074 167.546 20.574 plMakePlateFromTile : mjd of obs : 53852.567806 Observed HA/dec of plate center, fiducial point (deg) : -2.002 19.044 -2.003 20.544 The rotation angle of the fid. point is 7.059977 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1729.par makePlates : plateInfo struct for plate 2491 : (h4).mjd 53852 (h4).raCen 167.7503 (h4).decCen 16.77958 (h4).haCen -2 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 167.750 16.780 167.750 18.280 plMakePlateFromTile : mjd of obs : 53852.568369 Observed HA/dec of plate center, fiducial point (deg) : -2.002 16.750 -2.003 18.250 The rotation angle of the fid. point is 6.081038 plMakePlateFromTile : beginning loop over 1353 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1748.par makePlates : plateInfo struct for plate 2492 : (h4).mjd 53852 (h4).raCen 168.2502 (h4).decCen 21.60969 (h4).haCen -3 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 168.250 21.610 168.250 23.110 plMakePlateFromTile : mjd of obs : 53852.566986 Observed HA/dec of plate center, fiducial point (deg) : -3.002 21.579 -3.003 23.079 The rotation angle of the fid. point is 12.758331 plMakePlateFromTile : beginning loop over 1313 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1739.par makePlates : plateInfo struct for plate 2493 : (h4).mjd 53852 (h4).raCen 169.1963 (h4).decCen 24.15354 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.196 24.154 169.196 25.654 plMakePlateFromTile : mjd of obs : 53852.566837 Observed HA/dec of plate center, fiducial point (deg) : -4.002 24.122 -4.003 25.622 The rotation angle of the fid. point is 21.202365 plMakePlateFromTile : beginning loop over 1335 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1730.par makePlates : plateInfo struct for plate 2494 : (h4).mjd 53852 (h4).raCen 169.9901 (h4).decCen 16.94471 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.990 16.945 169.990 18.445 plMakePlateFromTile : mjd of obs : 53852.569032 Observed HA/dec of plate center, fiducial point (deg) : -4.002 16.915 -4.003 18.415 The rotation angle of the fid. point is 12.100250 plMakePlateFromTile : beginning loop over 1349 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1759.par makePlates : plateInfo struct for plate 2495 : (h4).mjd 53852 (h4).raCen 169.9936 (h4).decCen 19.14696 (h4).haCen -4 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 169.994 19.147 169.994 20.647 plMakePlateFromTile : mjd of obs : 53852.569042 Observed HA/dec of plate center, fiducial point (deg) : -4.002 19.117 -4.003 20.616 The rotation angle of the fid. point is 13.924184 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1749.par makePlates : plateInfo struct for plate 2496 : (h4).mjd 53852 (h4).raCen 170.4303 (h4).decCen 21.80612 (h4).haCen -5 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 170.430 21.806 170.430 23.306 plMakePlateFromTile : mjd of obs : 53852.567482 Observed HA/dec of plate center, fiducial point (deg) : -5.002 21.775 -5.003 23.275 The rotation angle of the fid. point is 20.901268 plMakePlateFromTile : beginning loop over 1311 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1740.par makePlates : plateInfo struct for plate 2497 : (h4).mjd 53852 (h4).raCen 171.2432 (h4).decCen 24.36568 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.243 24.366 171.243 25.866 plMakePlateFromTile : mjd of obs : 53852.566964 Observed HA/dec of plate center, fiducial point (deg) : -6.002 24.334 -6.003 25.834 The rotation angle of the fid. point is 30.591282 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1760.par makePlates : plateInfo struct for plate 2498 : (h4).mjd 53852 (h4).raCen 171.7549 (h4).decCen 19.53916 (h4).haCen -6 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 171.755 19.539 171.755 21.039 plMakePlateFromTile : mjd of obs : 53852.568379 Observed HA/dec of plate center, fiducial point (deg) : -6.002 19.508 -6.003 21.008 The rotation angle of the fid. point is 20.837685 plMakePlateFromTile : beginning loop over 1323 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1731.par makePlates : plateInfo struct for plate 2499 : (h4).mjd 53852 (h4).raCen 172.0518 (h4).decCen 17.1433 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.052 17.143 172.052 18.643 plMakePlateFromTile : mjd of obs : 53852.566430 Observed HA/dec of plate center, fiducial point (deg) : -7.002 17.113 -7.003 18.613 The rotation angle of the fid. point is 20.664838 plMakePlateFromTile : beginning loop over 1379 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1750.par makePlates : plateInfo struct for plate 2500 : (h4).mjd 53852 (h4).raCen 172.2526 (h4).decCen 21.95443 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.253 21.954 172.253 23.454 plMakePlateFromTile : mjd of obs : 53852.566988 Observed HA/dec of plate center, fiducial point (deg) : -7.002 21.923 -7.003 23.423 The rotation angle of the fid. point is 28.267120 plMakePlateFromTile : beginning loop over 1312 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1741.par makePlates : plateInfo struct for plate 2501 : (h4).mjd 53852 (h4).raCen 172.9789 (h4).decCen 24.52102 (h4).haCen -7 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 172.979 24.521 172.979 26.021 plMakePlateFromTile : mjd of obs : 53852.569001 Observed HA/dec of plate center, fiducial point (deg) : -7.002 24.489 -7.003 25.989 The rotation angle of the fid. point is 34.932934 plMakePlateFromTile : beginning loop over 1332 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1761.par makePlates : plateInfo struct for plate 2502 : (h4).mjd 53852 (h4).raCen 173.4476 (h4).decCen 19.59615 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.448 19.596 173.448 21.096 plMakePlateFromTile : mjd of obs : 53852.567526 Observed HA/dec of plate center, fiducial point (deg) : -8.002 19.565 -8.003 21.065 The rotation angle of the fid. point is 26.845259 plMakePlateFromTile : beginning loop over 1331 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1732.par makePlates : plateInfo struct for plate 2503 : (h4).mjd 53852 (h4).raCen 173.8135 (h4).decCen 17.24691 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.814 17.247 173.814 18.747 plMakePlateFromTile : mjd of obs : 53852.568538 Observed HA/dec of plate center, fiducial point (deg) : -8.002 17.217 -8.003 18.716 The rotation angle of the fid. point is 23.388699 plMakePlateFromTile : beginning loop over 1379 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-28.43, -98.07, 7.3) and (-28.43, -97.90, 6.2) checkLTHo : distance = 0.174, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-28.43, -98.07, 7.3) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1751.par makePlates : plateInfo struct for plate 2504 : (h4).mjd 53852 (h4).raCen 173.8656 (h4).decCen 22.02046 (h4).haCen -8 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 173.866 22.020 173.866 23.520 plMakePlateFromTile : mjd of obs : 53852.568685 Observed HA/dec of plate center, fiducial point (deg) : -8.002 21.989 -8.003 23.489 The rotation angle of the fid. point is 31.603461 plMakePlateFromTile : beginning loop over 1306 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1742.par makePlates : plateInfo struct for plate 2505 : (h4).mjd 53852 (h4).raCen 174.841 (h4).decCen 24.68077 (h4).haCen 20 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 174.841 24.681 174.841 26.181 plMakePlateFromTile : mjd of obs : 53852.648974 Observed HA/dec of plate center, fiducial point (deg) : 19.998 24.649 19.997 26.149 The rotation angle of the fid. point is -60.505095 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1762.par makePlates : plateInfo struct for plate 2506 : (h4).mjd 53852 (h4).raCen 175.1715 (h4).decCen 19.61645 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.172 19.616 175.172 21.116 plMakePlateFromTile : mjd of obs : 53852.647116 Observed HA/dec of plate center, fiducial point (deg) : 18.998 19.586 18.997 21.085 The rotation angle of the fid. point is -48.321192 plMakePlateFromTile : beginning loop over 1329 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program checkLTHo : collision between LIGHT_TRAPs (-55.47, -134.85, 7.2) and (-56.49, -134.11, 8.4) checkLTHo : distance = 1.268, while minimum separation = 4.000 checkLTHo : removing LIGHT_TRAP=(-56.49, -134.11, 8.4) makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1752.par makePlates : plateInfo struct for plate 2507 : (h4).mjd 53852 (h4).raCen 175.4185 (h4).decCen 22.17923 (h4).haCen 19 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 175.418 22.179 175.418 23.679 plMakePlateFromTile : mjd of obs : 53852.647801 Observed HA/dec of plate center, fiducial point (deg) : 18.998 22.148 18.997 23.648 The rotation angle of the fid. point is -53.594153 plMakePlateFromTile : beginning loop over 1300 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1733.par makePlates : plateInfo struct for plate 2508 : (h4).mjd 53852 (h4).raCen 176.0004 (h4).decCen 17.22666 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.000 17.227 176.000 18.727 plMakePlateFromTile : mjd of obs : 53852.646640 Observed HA/dec of plate center, fiducial point (deg) : 17.998 17.196 17.997 18.696 The rotation angle of the fid. point is -42.765672 plMakePlateFromTile : beginning loop over 1375 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1763.par makePlates : plateInfo struct for plate 2509 : (h4).mjd 53852 (h4).raCen 176.8517 (h4).decCen 19.76466 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.852 19.765 176.852 21.265 plMakePlateFromTile : mjd of obs : 53852.648999 Observed HA/dec of plate center, fiducial point (deg) : 17.998 19.734 17.997 21.233 The rotation angle of the fid. point is -47.303639 plMakePlateFromTile : beginning loop over 1337 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1743.par makePlates : plateInfo struct for plate 2510 : (h4).mjd 53852 (h4).raCen 176.8729 (h4).decCen 24.76408 (h4).haCen 18 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 176.873 24.764 176.873 26.264 plMakePlateFromTile : mjd of obs : 53852.649060 Observed HA/dec of plate center, fiducial point (deg) : 17.998 24.732 17.997 26.232 The rotation angle of the fid. point is -58.810126 plMakePlateFromTile : beginning loop over 1321 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1753.par makePlates : plateInfo struct for plate 2511 : (h4).mjd 53852 (h4).raCen 177.1244 (h4).decCen 22.23192 (h4).haCen 17 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 177.124 22.232 177.124 23.732 plMakePlateFromTile : mjd of obs : 53852.646984 Observed HA/dec of plate center, fiducial point (deg) : 16.998 22.200 16.997 23.700 The rotation angle of the fid. point is -51.211883 plMakePlateFromTile : beginning loop over 1293 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1734.par makePlates : plateInfo struct for plate 2512 : (h4).mjd 53852 (h4).raCen 178.5435 (h4).decCen 17.22277 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.543 17.223 178.543 18.723 plMakePlateFromTile : mjd of obs : 53852.648142 Observed HA/dec of plate center, fiducial point (deg) : 15.998 17.192 15.997 18.692 The rotation angle of the fid. point is -39.771789 plMakePlateFromTile : beginning loop over 1362 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1754.par makePlates : plateInfo struct for plate 2513 : (h4).mjd 53852 (h4).raCen 178.5682 (h4).decCen 22.2048 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.568 22.205 178.568 23.705 plMakePlateFromTile : mjd of obs : 53852.648212 Observed HA/dec of plate center, fiducial point (deg) : 15.998 22.173 15.997 23.673 The rotation angle of the fid. point is -49.715030 plMakePlateFromTile : beginning loop over 1325 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1744.par makePlates : plateInfo struct for plate 2514 : (h4).mjd 53852 (h4).raCen 178.6171 (h4).decCen 24.8135 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.617 24.814 178.617 26.314 plMakePlateFromTile : mjd of obs : 53852.648348 Observed HA/dec of plate center, fiducial point (deg) : 15.998 24.781 15.997 26.281 The rotation angle of the fid. point is -56.590706 plMakePlateFromTile : beginning loop over 1341 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from /opdb/d1/data/tileChunk/chunk143/complete//plPlugMapT-1764.par makePlates : plateInfo struct for plate 2515 : (h4).mjd 53852 (h4).raCen 178.6606 (h4).decCen 19.70764 (h4).haCen 16 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 4 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 178.661 19.708 178.661 21.208 plMakePlateFromTile : mjd of obs : 53852.648467 Observed HA/dec of plate center, fiducial point (deg) : 15.998 19.676 15.997 21.176 The rotation angle of the fid. point is -44.266709 plMakePlateFromTile : beginning loop over 1336 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Tue Apr 4 17:02:57 CDT 2006 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_21/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_21/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /fnal/ups/prd/astrotools/v5_21Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 39 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2477.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 5 139 2 9 103 3 6 95 4 10 114 5 10 129 6 13 95 7 6 84 8 5 100 9 9 101 10 10 165 11 6 135 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5087 40 1 60 20 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 312 101 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 310 32 plFiberPlate : adding spectro-photo std with objId = 5140 40 4 70 48 plFiberPlate : adding spectro-photo std with objId = 5137 40 6 312 10 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 314 62 plFiberPlate : adding spectro-photo std with objId = 5140 40 1 60 67 plFiberPlate : adding spectro-photo std with objId = 5140 40 3 62 161 plFiberPlate : 90 possible sky positions to use as objects from a possible 620. plFiberPlate : 60 possible sky positions to use as objects from a possible 619. plFiberPlate : 45 possible sky positions to use as objects from a possible 618. plFiberPlate : 22 possible sky positions to use as objects from a possible 617. plFiberPlate : 45 possible sky positions to use as objects from a possible 616. plFiberPlate : 22 possible sky positions to use as objects from a possible 615. plFiberPlate : 45 possible sky positions to use as objects from a possible 614. plFiberPlate : 92 possible sky positions to use as objects from a possible 613. plFiberPlate : 38 possible sky positions to use as objects from a possible 612. plFiberPlate : 34 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 17 possible sky positions to use as objects from a possible 609. plFiberPlate : 23 possible sky positions to use as objects from a possible 608. plFiberPlate : 33 possible sky positions to use as objects from a possible 607. plFiberPlate : 9 possible sky positions to use as objects from a possible 606. plFiberPlate : 14 possible sky positions to use as objects from a possible 605. plFiberPlate : 65 possible sky positions to use as objects from a possible 604. plFiberPlate : 39 possible sky positions to use as objects from a possible 603. plFiberPlate : 26 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 4 possible sky positions to use as objects from a possible 600. plFiberPlate : 11 possible sky positions to use as objects from a possible 599. plFiberPlate : 13 possible sky positions to use as objects from a possible 598. plFiberPlate : 17 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 32 possible sky positions to use as objects from a possible 595. plFiberPlate : 33 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 9 possible sky positions to use as objects from a possible 592. plFiberPlate : 18 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2477.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2477.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2478.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 123 2 10 90 3 11 88 4 12 124 5 13 122 6 9 98 7 6 92 8 10 112 9 8 118 10 14 149 11 8 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 316 176 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 314 48 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 310 32 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 324 8 plFiberPlate : adding spectro-photo std with objId = 5140 40 1 60 67 plFiberPlate : adding spectro-photo std with objId = 5312 40 6 192 27 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 198 8 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 20 2 plFiberPlate : 110 possible sky positions to use as objects from a possible 620. plFiberPlate : 69 possible sky positions to use as objects from a possible 619. plFiberPlate : 31 possible sky positions to use as objects from a possible 618. plFiberPlate : 17 possible sky positions to use as objects from a possible 617. plFiberPlate : 41 possible sky positions to use as objects from a possible 616. plFiberPlate : 26 possible sky positions to use as objects from a possible 615. plFiberPlate : 43 possible sky positions to use as objects from a possible 614. plFiberPlate : 87 possible sky positions to use as objects from a possible 613. plFiberPlate : 36 possible sky positions to use as objects from a possible 612. plFiberPlate : 14 possible sky positions to use as objects from a possible 611. plFiberPlate : 6 possible sky positions to use as objects from a possible 610. plFiberPlate : 6 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 12 possible sky positions to use as objects from a possible 607. plFiberPlate : 17 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 64 possible sky positions to use as objects from a possible 604. plFiberPlate : 45 possible sky positions to use as objects from a possible 603. plFiberPlate : 32 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 10 possible sky positions to use as objects from a possible 600. plFiberPlate : 18 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 10 possible sky positions to use as objects from a possible 597. plFiberPlate : 15 possible sky positions to use as objects from a possible 596. plFiberPlate : 26 possible sky positions to use as objects from a possible 595. plFiberPlate : 38 possible sky positions to use as objects from a possible 594. plFiberPlate : 16 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : 21 possible sky positions to use as objects from a possible 591. plFiberPlate : 12 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2477.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2478.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2478.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2479.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 112 2 10 102 3 8 92 4 15 115 5 9 127 6 9 106 7 5 96 8 10 104 9 10 112 10 13 149 11 6 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5312 40 4 193 75 plFiberPlate : adding spectro-photo std with objId = 5312 40 1 191 9 plFiberPlate : adding spectro-photo std with objId = 5312 40 1 186 17 plFiberPlate : adding spectro-photo std with objId = 5312 40 6 192 27 plFiberPlate : adding spectro-photo std with objId = 5313 40 3 26 95 plFiberPlate : adding spectro-photo std with objId = 5313 40 2 26 23 plFiberPlate : adding spectro-photo std with objId = 5313 40 4 14 10 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 20 2 plFiberPlate : 91 possible sky positions to use as objects from a possible 617. plFiberPlate : 82 possible sky positions to use as objects from a possible 616. plFiberPlate : 41 possible sky positions to use as objects from a possible 615. plFiberPlate : 37 possible sky positions to use as objects from a possible 614. plFiberPlate : 28 possible sky positions to use as objects from a possible 613. plFiberPlate : 41 possible sky positions to use as objects from a possible 612. plFiberPlate : 34 possible sky positions to use as objects from a possible 611. plFiberPlate : 54 possible sky positions to use as objects from a possible 610. plFiberPlate : 39 possible sky positions to use as objects from a possible 609. plFiberPlate : 31 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 12 possible sky positions to use as objects from a possible 606. plFiberPlate : 12 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 21 possible sky positions to use as objects from a possible 603. plFiberPlate : 21 possible sky positions to use as objects from a possible 602. plFiberPlate : 38 possible sky positions to use as objects from a possible 601. plFiberPlate : 26 possible sky positions to use as objects from a possible 600. plFiberPlate : 21 possible sky positions to use as objects from a possible 599. plFiberPlate : 15 possible sky positions to use as objects from a possible 598. plFiberPlate : 8 possible sky positions to use as objects from a possible 597. plFiberPlate : 6 possible sky positions to use as objects from a possible 596. plFiberPlate : 19 possible sky positions to use as objects from a possible 595. plFiberPlate : 9 possible sky positions to use as objects from a possible 594. plFiberPlate : 21 possible sky positions to use as objects from a possible 593. plFiberPlate : 46 possible sky positions to use as objects from a possible 592. plFiberPlate : 23 possible sky positions to use as objects from a possible 591. plFiberPlate : 38 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 26 possible sky positions to use as objects from a possible 588. plFiberPlate : 12 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2478.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2479.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2479.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2480.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 131 2 16 114 3 13 90 4 9 63 5 8 95 6 17 104 7 11 97 8 12 105 9 10 103 10 16 160 11 12 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 2 102 33 plFiberPlate : adding spectro-photo std with objId = 5360 40 2 113 27 plFiberPlate : adding spectro-photo std with objId = 5360 40 4 100 13 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 54 10 plFiberPlate : adding spectro-photo std with objId = 5360 40 6 101 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 4 104 39 plFiberPlate : adding spectro-photo std with objId = 5381 40 3 48 65 plFiberPlate : adding spectro-photo std with objId = 5360 40 5 106 60 plFiberPlate : 90 possible sky positions to use as objects from a possible 572. plFiberPlate : 55 possible sky positions to use as objects from a possible 571. plFiberPlate : 27 possible sky positions to use as objects from a possible 570. plFiberPlate : 22 possible sky positions to use as objects from a possible 569. plFiberPlate : 19 possible sky positions to use as objects from a possible 568. plFiberPlate : 31 possible sky positions to use as objects from a possible 567. plFiberPlate : 29 possible sky positions to use as objects from a possible 566. plFiberPlate : 38 possible sky positions to use as objects from a possible 565. plFiberPlate : 32 possible sky positions to use as objects from a possible 564. plFiberPlate : 34 possible sky positions to use as objects from a possible 563. plFiberPlate : 20 possible sky positions to use as objects from a possible 562. plFiberPlate : 12 possible sky positions to use as objects from a possible 561. plFiberPlate : 6 possible sky positions to use as objects from a possible 560. plFiberPlate : 26 possible sky positions to use as objects from a possible 559. plFiberPlate : 8 possible sky positions to use as objects from a possible 558. plFiberPlate : 21 possible sky positions to use as objects from a possible 557. plFiberPlate : 43 possible sky positions to use as objects from a possible 556. plFiberPlate : 36 possible sky positions to use as objects from a possible 555. plFiberPlate : 29 possible sky positions to use as objects from a possible 554. plFiberPlate : 12 possible sky positions to use as objects from a possible 553. plFiberPlate : 7 possible sky positions to use as objects from a possible 552. plFiberPlate : 9 possible sky positions to use as objects from a possible 551. plFiberPlate : 21 possible sky positions to use as objects from a possible 550. plFiberPlate : 8 possible sky positions to use as objects from a possible 549. plFiberPlate : 11 possible sky positions to use as objects from a possible 548. plFiberPlate : 39 possible sky positions to use as objects from a possible 547. plFiberPlate : 29 possible sky positions to use as objects from a possible 546. plFiberPlate : 40 possible sky positions to use as objects from a possible 545. plFiberPlate : 20 possible sky positions to use as objects from a possible 544. plFiberPlate : 24 possible sky positions to use as objects from a possible 543. plFiberPlate : 18 possible sky positions to use as objects from a possible 542. plFiberPlate : 11 possible sky positions to use as objects from a possible 541. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2479.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2480.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2480.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2481.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 117 2 11 79 3 5 73 4 6 124 5 11 130 6 9 98 7 8 94 8 6 113 9 5 104 10 11 125 11 12 97 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 323 25 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 214 45 plFiberPlate : adding spectro-photo std with objId = 5137 40 5 334 80 plFiberPlate : adding spectro-photo std with objId = 5137 40 5 332 152 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 75 122 plFiberPlate : adding spectro-photo std with objId = 5137 40 2 325 33 plFiberPlate : adding spectro-photo std with objId = 5140 40 4 70 48 plFiberPlate : adding spectro-photo std with objId = 5137 40 5 322 24 plFiberPlate : 75 possible sky positions to use as objects from a possible 599. plFiberPlate : 43 possible sky positions to use as objects from a possible 598. plFiberPlate : 36 possible sky positions to use as objects from a possible 597. plFiberPlate : 23 possible sky positions to use as objects from a possible 596. plFiberPlate : 28 possible sky positions to use as objects from a possible 595. plFiberPlate : 27 possible sky positions to use as objects from a possible 594. plFiberPlate : 59 possible sky positions to use as objects from a possible 593. plFiberPlate : 56 possible sky positions to use as objects from a possible 592. plFiberPlate : 24 possible sky positions to use as objects from a possible 591. plFiberPlate : 14 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : 8 possible sky positions to use as objects from a possible 588. plFiberPlate : 18 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 6 possible sky positions to use as objects from a possible 585. plFiberPlate : 39 possible sky positions to use as objects from a possible 584. plFiberPlate : 51 possible sky positions to use as objects from a possible 583. plFiberPlate : 22 possible sky positions to use as objects from a possible 582. plFiberPlate : 18 possible sky positions to use as objects from a possible 581. plFiberPlate : 11 possible sky positions to use as objects from a possible 580. plFiberPlate : 9 possible sky positions to use as objects from a possible 579. plFiberPlate : 5 possible sky positions to use as objects from a possible 578. plFiberPlate : 18 possible sky positions to use as objects from a possible 577. plFiberPlate : 22 possible sky positions to use as objects from a possible 576. plFiberPlate : 18 possible sky positions to use as objects from a possible 575. plFiberPlate : 45 possible sky positions to use as objects from a possible 574. plFiberPlate : 29 possible sky positions to use as objects from a possible 573. plFiberPlate : 20 possible sky positions to use as objects from a possible 572. plFiberPlate : 19 possible sky positions to use as objects from a possible 571. plFiberPlate : 5 possible sky positions to use as objects from a possible 570. plFiberPlate : 32 possible sky positions to use as objects from a possible 569. plFiberPlate : 27 possible sky positions to use as objects from a possible 568. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2480.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2481.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2481.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2482.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 136 2 10 96 3 10 80 4 9 103 5 9 143 6 6 109 7 13 90 8 10 111 9 6 112 10 15 137 11 9 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 60 17 plFiberPlate : adding spectro-photo std with objId = 5312 40 1 198 47 plFiberPlate : adding spectro-photo std with objId = 5313 40 4 35 36 plFiberPlate : adding spectro-photo std with objId = 5312 40 4 204 6 plFiberPlate : adding spectro-photo std with objId = 5312 40 6 209 110 plFiberPlate : adding spectro-photo std with objId = 5313 40 2 26 23 plFiberPlate : adding spectro-photo std with objId = 5313 40 2 34 96 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 210 6 plFiberPlate : 110 possible sky positions to use as objects from a possible 621. plFiberPlate : 69 possible sky positions to use as objects from a possible 620. plFiberPlate : 53 possible sky positions to use as objects from a possible 619. plFiberPlate : 28 possible sky positions to use as objects from a possible 618. plFiberPlate : 19 possible sky positions to use as objects from a possible 617. plFiberPlate : 20 possible sky positions to use as objects from a possible 616. plFiberPlate : 43 possible sky positions to use as objects from a possible 615. plFiberPlate : 90 possible sky positions to use as objects from a possible 614. plFiberPlate : 50 possible sky positions to use as objects from a possible 613. plFiberPlate : 34 possible sky positions to use as objects from a possible 612. plFiberPlate : 14 possible sky positions to use as objects from a possible 611. plFiberPlate : 8 possible sky positions to use as objects from a possible 610. plFiberPlate : 17 possible sky positions to use as objects from a possible 609. plFiberPlate : 20 possible sky positions to use as objects from a possible 608. plFiberPlate : 26 possible sky positions to use as objects from a possible 607. plFiberPlate : 44 possible sky positions to use as objects from a possible 606. plFiberPlate : 92 possible sky positions to use as objects from a possible 605. plFiberPlate : 63 possible sky positions to use as objects from a possible 604. plFiberPlate : 35 possible sky positions to use as objects from a possible 603. plFiberPlate : 18 possible sky positions to use as objects from a possible 602. plFiberPlate : 7 possible sky positions to use as objects from a possible 601. plFiberPlate : 10 possible sky positions to use as objects from a possible 600. plFiberPlate : 22 possible sky positions to use as objects from a possible 599. plFiberPlate : 28 possible sky positions to use as objects from a possible 598. plFiberPlate : 26 possible sky positions to use as objects from a possible 597. plFiberPlate : 72 possible sky positions to use as objects from a possible 596. plFiberPlate : 41 possible sky positions to use as objects from a possible 595. plFiberPlate : 36 possible sky positions to use as objects from a possible 594. plFiberPlate : 6 possible sky positions to use as objects from a possible 593. plFiberPlate : 14 possible sky positions to use as objects from a possible 592. plFiberPlate : 9 possible sky positions to use as objects from a possible 591. plFiberPlate : 25 possible sky positions to use as objects from a possible 590. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2481.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2482.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2482.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2483.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 116 2 19 94 3 14 88 4 10 106 5 10 115 6 11 105 7 12 96 8 17 107 9 15 89 10 20 143 11 15 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 6 123 2 plFiberPlate : adding spectro-photo std with objId = 5360 40 1 113 65 plFiberPlate : adding spectro-photo std with objId = 5381 40 5 66 24 plFiberPlate : adding spectro-photo std with objId = 5360 40 4 120 12 plFiberPlate : adding spectro-photo std with objId = 5360 40 2 113 27 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 66 47 plFiberPlate : adding spectro-photo std with objId = 5381 40 2 71 4 plFiberPlate : adding spectro-photo std with objId = 5381 40 2 65 9 plFiberPlate : 115 possible sky positions to use as objects from a possible 589. plFiberPlate : 83 possible sky positions to use as objects from a possible 588. plFiberPlate : 56 possible sky positions to use as objects from a possible 587. plFiberPlate : 16 possible sky positions to use as objects from a possible 586. plFiberPlate : 23 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : 42 possible sky positions to use as objects from a possible 583. plFiberPlate : 72 possible sky positions to use as objects from a possible 582. plFiberPlate : 66 possible sky positions to use as objects from a possible 581. plFiberPlate : 51 possible sky positions to use as objects from a possible 580. plFiberPlate : 29 possible sky positions to use as objects from a possible 579. plFiberPlate : 11 possible sky positions to use as objects from a possible 578. plFiberPlate : 6 possible sky positions to use as objects from a possible 577. plFiberPlate : 6 possible sky positions to use as objects from a possible 576. plFiberPlate : 19 possible sky positions to use as objects from a possible 575. plFiberPlate : 39 possible sky positions to use as objects from a possible 574. plFiberPlate : 53 possible sky positions to use as objects from a possible 573. plFiberPlate : 30 possible sky positions to use as objects from a possible 572. plFiberPlate : 9 possible sky positions to use as objects from a possible 571. plFiberPlate : 4 possible sky positions to use as objects from a possible 570. plFiberPlate : 1 possible sky positions to use as objects from a possible 569. plFiberPlate : 3 possible sky positions to use as objects from a possible 568. plFiberPlate : 8 possible sky positions to use as objects from a possible 567. plFiberPlate : 5 possible sky positions to use as objects from a possible 566. plFiberPlate : 26 possible sky positions to use as objects from a possible 565. plFiberPlate : 42 possible sky positions to use as objects from a possible 564. plFiberPlate : 39 possible sky positions to use as objects from a possible 563. plFiberPlate : 28 possible sky positions to use as objects from a possible 562. plFiberPlate : 3 possible sky positions to use as objects from a possible 561. plFiberPlate : 4 possible sky positions to use as objects from a possible 560. plFiberPlate : 9 possible sky positions to use as objects from a possible 559. plFiberPlate : 23 possible sky positions to use as objects from a possible 558. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2482.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2483.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2483.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2484.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 121 2 8 92 3 8 98 4 7 120 5 7 128 6 12 89 7 11 96 8 9 108 9 9 115 10 11 151 11 8 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 212 29 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 210 17 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 211 43 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 224 34 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 324 8 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 221 23 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 33 55 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 210 6 plFiberPlate : 77 possible sky positions to use as objects from a possible 618. plFiberPlate : 65 possible sky positions to use as objects from a possible 617. plFiberPlate : 33 possible sky positions to use as objects from a possible 616. plFiberPlate : 25 possible sky positions to use as objects from a possible 615. plFiberPlate : 33 possible sky positions to use as objects from a possible 614. plFiberPlate : 31 possible sky positions to use as objects from a possible 613. plFiberPlate : 22 possible sky positions to use as objects from a possible 612. plFiberPlate : 80 possible sky positions to use as objects from a possible 611. plFiberPlate : 35 possible sky positions to use as objects from a possible 610. plFiberPlate : 19 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 28 possible sky positions to use as objects from a possible 607. plFiberPlate : 12 possible sky positions to use as objects from a possible 606. plFiberPlate : 17 possible sky positions to use as objects from a possible 605. plFiberPlate : 18 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 60 possible sky positions to use as objects from a possible 602. plFiberPlate : 27 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 11 possible sky positions to use as objects from a possible 599. plFiberPlate : 16 possible sky positions to use as objects from a possible 598. plFiberPlate : 20 possible sky positions to use as objects from a possible 597. plFiberPlate : 9 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 20 possible sky positions to use as objects from a possible 594. plFiberPlate : 22 possible sky positions to use as objects from a possible 593. plFiberPlate : 48 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 15 possible sky positions to use as objects from a possible 590. plFiberPlate : 17 possible sky positions to use as objects from a possible 589. plFiberPlate : 12 possible sky positions to use as objects from a possible 588. plFiberPlate : 14 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 670 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2483.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2484.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2484.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2485.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 113 2 18 87 3 12 99 4 12 118 5 9 124 6 11 102 7 7 93 8 10 105 9 7 102 10 19 156 11 14 93 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5313 40 2 42 95 plFiberPlate : adding spectro-photo std with objId = 5313 40 4 48 4 plFiberPlate : adding spectro-photo std with objId = 5313 40 2 34 96 plFiberPlate : adding spectro-photo std with objId = 5312 40 1 215 10 plFiberPlate : adding spectro-photo std with objId = 5312 40 6 214 40 plFiberPlate : adding spectro-photo std with objId = 5313 40 3 41 65 plFiberPlate : adding spectro-photo std with objId = 5360 40 6 129 8 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 38 31 plFiberPlate : 133 possible sky positions to use as objects from a possible 614. plFiberPlate : 71 possible sky positions to use as objects from a possible 613. plFiberPlate : 42 possible sky positions to use as objects from a possible 612. plFiberPlate : 27 possible sky positions to use as objects from a possible 611. plFiberPlate : 39 possible sky positions to use as objects from a possible 610. plFiberPlate : 20 possible sky positions to use as objects from a possible 609. plFiberPlate : 40 possible sky positions to use as objects from a possible 608. plFiberPlate : 88 possible sky positions to use as objects from a possible 607. plFiberPlate : 78 possible sky positions to use as objects from a possible 606. plFiberPlate : 46 possible sky positions to use as objects from a possible 605. plFiberPlate : 18 possible sky positions to use as objects from a possible 604. plFiberPlate : 6 possible sky positions to use as objects from a possible 603. plFiberPlate : 9 possible sky positions to use as objects from a possible 602. plFiberPlate : 13 possible sky positions to use as objects from a possible 601. plFiberPlate : 6 possible sky positions to use as objects from a possible 600. plFiberPlate : 20 possible sky positions to use as objects from a possible 599. plFiberPlate : 88 possible sky positions to use as objects from a possible 598. plFiberPlate : 45 possible sky positions to use as objects from a possible 597. plFiberPlate : 38 possible sky positions to use as objects from a possible 596. plFiberPlate : 18 possible sky positions to use as objects from a possible 595. plFiberPlate : 16 possible sky positions to use as objects from a possible 594. plFiberPlate : 6 possible sky positions to use as objects from a possible 593. plFiberPlate : 9 possible sky positions to use as objects from a possible 592. plFiberPlate : 6 possible sky positions to use as objects from a possible 591. plFiberPlate : 31 possible sky positions to use as objects from a possible 590. plFiberPlate : 40 possible sky positions to use as objects from a possible 589. plFiberPlate : 37 possible sky positions to use as objects from a possible 588. plFiberPlate : 27 possible sky positions to use as objects from a possible 587. plFiberPlate : 25 possible sky positions to use as objects from a possible 586. plFiberPlate : 21 possible sky positions to use as objects from a possible 585. plFiberPlate : 12 possible sky positions to use as objects from a possible 584. plFiberPlate : 25 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2484.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2485.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2485.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2486.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 119 2 4 101 3 5 95 4 5 93 5 9 130 6 10 106 7 3 108 8 6 114 9 1 104 10 9 150 11 8 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5140 40 5 89 92 plFiberPlate : adding spectro-photo std with objId = 5137 40 6 345 81 plFiberPlate : adding spectro-photo std with objId = 5140 40 1 91 65 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 86 45 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 95 66 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 344 41 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 89 71 plFiberPlate : adding spectro-photo std with objId = 5140 40 3 94 8 plFiberPlate : 120 possible sky positions to use as objects from a possible 617. plFiberPlate : 75 possible sky positions to use as objects from a possible 616. plFiberPlate : 62 possible sky positions to use as objects from a possible 615. plFiberPlate : 44 possible sky positions to use as objects from a possible 614. plFiberPlate : 42 possible sky positions to use as objects from a possible 613. plFiberPlate : 30 possible sky positions to use as objects from a possible 612. plFiberPlate : 42 possible sky positions to use as objects from a possible 611. plFiberPlate : 78 possible sky positions to use as objects from a possible 610. plFiberPlate : 66 possible sky positions to use as objects from a possible 609. plFiberPlate : 50 possible sky positions to use as objects from a possible 608. plFiberPlate : 27 possible sky positions to use as objects from a possible 607. plFiberPlate : 15 possible sky positions to use as objects from a possible 606. plFiberPlate : 15 possible sky positions to use as objects from a possible 605. plFiberPlate : 17 possible sky positions to use as objects from a possible 604. plFiberPlate : 24 possible sky positions to use as objects from a possible 603. plFiberPlate : 22 possible sky positions to use as objects from a possible 602. plFiberPlate : 68 possible sky positions to use as objects from a possible 601. plFiberPlate : 38 possible sky positions to use as objects from a possible 600. plFiberPlate : 20 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 7 possible sky positions to use as objects from a possible 597. plFiberPlate : 8 possible sky positions to use as objects from a possible 596. plFiberPlate : 9 possible sky positions to use as objects from a possible 595. plFiberPlate : 22 possible sky positions to use as objects from a possible 594. plFiberPlate : 16 possible sky positions to use as objects from a possible 593. plFiberPlate : 65 possible sky positions to use as objects from a possible 592. plFiberPlate : 47 possible sky positions to use as objects from a possible 591. plFiberPlate : 22 possible sky positions to use as objects from a possible 590. plFiberPlate : 26 possible sky positions to use as objects from a possible 589. plFiberPlate : 14 possible sky positions to use as objects from a possible 588. plFiberPlate : 24 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2485.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2486.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2486.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2487.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 13 127 2 11 110 3 10 101 4 13 102 5 14 114 6 18 99 7 16 83 8 16 111 9 16 105 10 12 151 11 7 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 2 129 39 plFiberPlate : adding spectro-photo std with objId = 5360 40 4 130 43 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 75 47 plFiberPlate : adding spectro-photo std with objId = 5360 40 3 131 92 plFiberPlate : adding spectro-photo std with objId = 5381 40 2 71 4 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 80 85 plFiberPlate : adding spectro-photo std with objId = 5360 40 6 129 8 plFiberPlate : adding spectro-photo std with objId = 5360 40 5 137 10 plFiberPlate : 108 possible sky positions to use as objects from a possible 612. plFiberPlate : 82 possible sky positions to use as objects from a possible 611. plFiberPlate : 53 possible sky positions to use as objects from a possible 610. plFiberPlate : 31 possible sky positions to use as objects from a possible 609. plFiberPlate : 33 possible sky positions to use as objects from a possible 608. plFiberPlate : 32 possible sky positions to use as objects from a possible 607. plFiberPlate : 45 possible sky positions to use as objects from a possible 606. plFiberPlate : 70 possible sky positions to use as objects from a possible 605. plFiberPlate : 60 possible sky positions to use as objects from a possible 604. plFiberPlate : 47 possible sky positions to use as objects from a possible 603. plFiberPlate : 34 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 11 possible sky positions to use as objects from a possible 600. plFiberPlate : 8 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : 50 possible sky positions to use as objects from a possible 597. plFiberPlate : 41 possible sky positions to use as objects from a possible 596. plFiberPlate : 33 possible sky positions to use as objects from a possible 595. plFiberPlate : 21 possible sky positions to use as objects from a possible 594. plFiberPlate : 13 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : 7 possible sky positions to use as objects from a possible 591. plFiberPlate : 8 possible sky positions to use as objects from a possible 590. plFiberPlate : 15 possible sky positions to use as objects from a possible 589. plFiberPlate : 49 possible sky positions to use as objects from a possible 588. plFiberPlate : 53 possible sky positions to use as objects from a possible 587. plFiberPlate : 53 possible sky positions to use as objects from a possible 586. plFiberPlate : 42 possible sky positions to use as objects from a possible 585. plFiberPlate : 27 possible sky positions to use as objects from a possible 584. plFiberPlate : 14 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2486.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2487.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2487.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2488.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 125 2 4 98 3 7 95 4 8 110 5 11 119 6 8 101 7 7 99 8 8 109 9 10 106 10 13 161 11 13 113 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 350 60 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 47 27 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 224 34 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 339 16 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 221 23 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 227 45 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 344 46 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 347 21 plFiberPlate : 119 possible sky positions to use as objects from a possible 613. plFiberPlate : 94 possible sky positions to use as objects from a possible 612. plFiberPlate : 70 possible sky positions to use as objects from a possible 611. plFiberPlate : 36 possible sky positions to use as objects from a possible 610. plFiberPlate : 31 possible sky positions to use as objects from a possible 609. plFiberPlate : 43 possible sky positions to use as objects from a possible 608. plFiberPlate : 54 possible sky positions to use as objects from a possible 607. plFiberPlate : 86 possible sky positions to use as objects from a possible 606. plFiberPlate : 80 possible sky positions to use as objects from a possible 605. plFiberPlate : 54 possible sky positions to use as objects from a possible 604. plFiberPlate : 40 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 12 possible sky positions to use as objects from a possible 601. plFiberPlate : 25 possible sky positions to use as objects from a possible 600. plFiberPlate : 20 possible sky positions to use as objects from a possible 599. plFiberPlate : 27 possible sky positions to use as objects from a possible 598. plFiberPlate : 75 possible sky positions to use as objects from a possible 597. plFiberPlate : 46 possible sky positions to use as objects from a possible 596. plFiberPlate : 35 possible sky positions to use as objects from a possible 595. plFiberPlate : 20 possible sky positions to use as objects from a possible 594. plFiberPlate : 16 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 8 possible sky positions to use as objects from a possible 591. plFiberPlate : 9 possible sky positions to use as objects from a possible 590. plFiberPlate : 33 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 34 possible sky positions to use as objects from a possible 587. plFiberPlate : 10 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : 16 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 677 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2487.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2488.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2488.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2489.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 120 2 8 99 3 10 85 4 14 121 5 10 127 6 5 99 7 6 93 8 6 118 9 5 101 10 13 143 11 9 106 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 105 27 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 95 66 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 358 15 plFiberPlate : adding spectro-photo std with objId = 5137 40 4 344 41 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 356 25 plFiberPlate : adding spectro-photo std with objId = 5140 40 5 108 99 plFiberPlate : adding spectro-photo std with objId = 5140 40 6 98 69 plFiberPlate : adding spectro-photo std with objId = 5140 40 5 100 64 plFiberPlate : 104 possible sky positions to use as objects from a possible 630. plFiberPlate : 54 possible sky positions to use as objects from a possible 629. plFiberPlate : 35 possible sky positions to use as objects from a possible 628. plFiberPlate : 22 possible sky positions to use as objects from a possible 627. plFiberPlate : 26 possible sky positions to use as objects from a possible 626. plFiberPlate : 34 possible sky positions to use as objects from a possible 625. plFiberPlate : 51 possible sky positions to use as objects from a possible 624. plFiberPlate : 101 possible sky positions to use as objects from a possible 623. plFiberPlate : 59 possible sky positions to use as objects from a possible 622. plFiberPlate : 28 possible sky positions to use as objects from a possible 621. plFiberPlate : 16 possible sky positions to use as objects from a possible 620. plFiberPlate : 9 possible sky positions to use as objects from a possible 619. plFiberPlate : 12 possible sky positions to use as objects from a possible 618. plFiberPlate : 8 possible sky positions to use as objects from a possible 617. plFiberPlate : 21 possible sky positions to use as objects from a possible 616. plFiberPlate : 36 possible sky positions to use as objects from a possible 615. plFiberPlate : 84 possible sky positions to use as objects from a possible 614. plFiberPlate : 35 possible sky positions to use as objects from a possible 613. plFiberPlate : 31 possible sky positions to use as objects from a possible 612. plFiberPlate : 12 possible sky positions to use as objects from a possible 611. plFiberPlate : 16 possible sky positions to use as objects from a possible 610. plFiberPlate : 6 possible sky positions to use as objects from a possible 609. plFiberPlate : 14 possible sky positions to use as objects from a possible 608. plFiberPlate : 25 possible sky positions to use as objects from a possible 607. plFiberPlate : 33 possible sky positions to use as objects from a possible 606. plFiberPlate : 40 possible sky positions to use as objects from a possible 605. plFiberPlate : 12 possible sky positions to use as objects from a possible 604. plFiberPlate : 10 possible sky positions to use as objects from a possible 603. plFiberPlate : 4 possible sky positions to use as objects from a possible 602. plFiberPlate : 15 possible sky positions to use as objects from a possible 601. plFiberPlate : 13 possible sky positions to use as objects from a possible 600. plFiberPlate : 21 possible sky positions to use as objects from a possible 599. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2488.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2489.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2489.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2490.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 136 2 5 107 3 4 93 4 8 105 5 8 129 6 7 109 7 5 96 8 8 125 9 5 116 10 5 155 11 8 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5312 40 2 227 8 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 91 21 plFiberPlate : adding spectro-photo std with objId = 5312 40 2 226 75 plFiberPlate : adding spectro-photo std with objId = 5313 40 4 48 4 plFiberPlate : adding spectro-photo std with objId = 5313 40 4 56 43 plFiberPlate : adding spectro-photo std with objId = 5225 41 5 29 40 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 88 26 plFiberPlate : adding spectro-photo std with objId = 5312 40 5 226 86 plFiberPlate : 120 possible sky positions to use as objects from a possible 642. plFiberPlate : 92 possible sky positions to use as objects from a possible 641. plFiberPlate : 74 possible sky positions to use as objects from a possible 640. plFiberPlate : 31 possible sky positions to use as objects from a possible 639. plFiberPlate : 17 possible sky positions to use as objects from a possible 638. plFiberPlate : 48 possible sky positions to use as objects from a possible 637. plFiberPlate : 75 possible sky positions to use as objects from a possible 636. plFiberPlate : 74 possible sky positions to use as objects from a possible 635. plFiberPlate : 59 possible sky positions to use as objects from a possible 634. plFiberPlate : 50 possible sky positions to use as objects from a possible 633. plFiberPlate : 33 possible sky positions to use as objects from a possible 632. plFiberPlate : 29 possible sky positions to use as objects from a possible 631. plFiberPlate : 14 possible sky positions to use as objects from a possible 630. plFiberPlate : 18 possible sky positions to use as objects from a possible 629. plFiberPlate : 18 possible sky positions to use as objects from a possible 628. plFiberPlate : 38 possible sky positions to use as objects from a possible 627. plFiberPlate : 84 possible sky positions to use as objects from a possible 626. plFiberPlate : 76 possible sky positions to use as objects from a possible 625. plFiberPlate : 46 possible sky positions to use as objects from a possible 624. plFiberPlate : 44 possible sky positions to use as objects from a possible 623. plFiberPlate : 22 possible sky positions to use as objects from a possible 622. plFiberPlate : 10 possible sky positions to use as objects from a possible 621. plFiberPlate : 9 possible sky positions to use as objects from a possible 620. plFiberPlate : 15 possible sky positions to use as objects from a possible 619. plFiberPlate : 31 possible sky positions to use as objects from a possible 618. plFiberPlate : 31 possible sky positions to use as objects from a possible 617. plFiberPlate : 31 possible sky positions to use as objects from a possible 616. plFiberPlate : 33 possible sky positions to use as objects from a possible 615. plFiberPlate : 9 possible sky positions to use as objects from a possible 614. plFiberPlate : 16 possible sky positions to use as objects from a possible 613. plFiberPlate : 13 possible sky positions to use as objects from a possible 612. plFiberPlate : 8 possible sky positions to use as objects from a possible 611. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2489.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2490.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2490.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2491.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 17 129 2 20 114 3 10 85 4 11 89 5 11 123 6 11 107 7 6 101 8 17 99 9 12 110 10 25 152 11 18 115 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 3 139 62 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 91 60 plFiberPlate : adding spectro-photo std with objId = 5360 40 6 140 17 plFiberPlate : adding spectro-photo std with objId = 5381 40 3 88 62 plFiberPlate : adding spectro-photo std with objId = 5360 40 5 137 6 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 95 127 plFiberPlate : adding spectro-photo std with objId = 5360 40 5 137 10 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 88 26 plFiberPlate : 103 possible sky positions to use as objects from a possible 606. plFiberPlate : 70 possible sky positions to use as objects from a possible 605. plFiberPlate : 77 possible sky positions to use as objects from a possible 604. plFiberPlate : 55 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 51 possible sky positions to use as objects from a possible 601. plFiberPlate : 50 possible sky positions to use as objects from a possible 600. plFiberPlate : 86 possible sky positions to use as objects from a possible 599. plFiberPlate : 71 possible sky positions to use as objects from a possible 598. plFiberPlate : 43 possible sky positions to use as objects from a possible 597. plFiberPlate : 21 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 17 possible sky positions to use as objects from a possible 594. plFiberPlate : 27 possible sky positions to use as objects from a possible 593. plFiberPlate : 27 possible sky positions to use as objects from a possible 592. plFiberPlate : 19 possible sky positions to use as objects from a possible 591. plFiberPlate : 59 possible sky positions to use as objects from a possible 590. plFiberPlate : 43 possible sky positions to use as objects from a possible 589. plFiberPlate : 36 possible sky positions to use as objects from a possible 588. plFiberPlate : 20 possible sky positions to use as objects from a possible 587. plFiberPlate : 10 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 11 possible sky positions to use as objects from a possible 584. plFiberPlate : 6 possible sky positions to use as objects from a possible 583. plFiberPlate : 6 possible sky positions to use as objects from a possible 582. plFiberPlate : 77 possible sky positions to use as objects from a possible 581. plFiberPlate : 47 possible sky positions to use as objects from a possible 580. plFiberPlate : 55 possible sky positions to use as objects from a possible 579. plFiberPlate : 20 possible sky positions to use as objects from a possible 578. plFiberPlate : 16 possible sky positions to use as objects from a possible 577. plFiberPlate : 11 possible sky positions to use as objects from a possible 576. plFiberPlate : 19 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2490.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2491.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2491.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2492.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 135 2 9 87 3 3 82 4 6 105 5 7 126 6 8 99 7 3 96 8 6 112 9 5 107 10 9 144 11 9 120 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 252 28 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 239 33 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 253 25 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 246 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 242 9 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 242 28 plFiberPlate : adding spectro-photo std with objId = 5225 41 6 33 61 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 356 19 plFiberPlate : 104 possible sky positions to use as objects from a possible 610. plFiberPlate : 86 possible sky positions to use as objects from a possible 609. plFiberPlate : 65 possible sky positions to use as objects from a possible 608. plFiberPlate : 36 possible sky positions to use as objects from a possible 607. plFiberPlate : 34 possible sky positions to use as objects from a possible 606. plFiberPlate : 44 possible sky positions to use as objects from a possible 605. plFiberPlate : 36 possible sky positions to use as objects from a possible 604. plFiberPlate : 91 possible sky positions to use as objects from a possible 603. plFiberPlate : 57 possible sky positions to use as objects from a possible 602. plFiberPlate : 30 possible sky positions to use as objects from a possible 601. plFiberPlate : 31 possible sky positions to use as objects from a possible 600. plFiberPlate : 27 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : 21 possible sky positions to use as objects from a possible 597. plFiberPlate : 50 possible sky positions to use as objects from a possible 596. plFiberPlate : 11 possible sky positions to use as objects from a possible 595. plFiberPlate : 69 possible sky positions to use as objects from a possible 594. plFiberPlate : 43 possible sky positions to use as objects from a possible 593. plFiberPlate : 34 possible sky positions to use as objects from a possible 592. plFiberPlate : 30 possible sky positions to use as objects from a possible 591. plFiberPlate : 17 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : 19 possible sky positions to use as objects from a possible 588. plFiberPlate : 18 possible sky positions to use as objects from a possible 587. plFiberPlate : 11 possible sky positions to use as objects from a possible 586. plFiberPlate : 36 possible sky positions to use as objects from a possible 585. plFiberPlate : 21 possible sky positions to use as objects from a possible 584. plFiberPlate : 23 possible sky positions to use as objects from a possible 583. plFiberPlate : 14 possible sky positions to use as objects from a possible 582. plFiberPlate : 9 possible sky positions to use as objects from a possible 581. plFiberPlate : 24 possible sky positions to use as objects from a possible 580. plFiberPlate : 13 possible sky positions to use as objects from a possible 579. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2491.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2492.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2492.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2493.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 130 2 8 105 3 9 92 4 7 104 5 7 127 6 13 102 7 11 93 8 10 120 9 8 102 10 10 150 11 12 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 249 10 plFiberPlate : adding spectro-photo std with objId = 5140 40 4 121 17 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 113 53 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 253 53 plFiberPlate : adding spectro-photo std with objId = 5224 40 5 113 75 plFiberPlate : adding spectro-photo std with objId = 5140 40 5 108 99 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 115 92 plFiberPlate : adding spectro-photo std with objId = 5140 40 3 126 31 plFiberPlate : 133 possible sky positions to use as objects from a possible 621. plFiberPlate : 85 possible sky positions to use as objects from a possible 620. plFiberPlate : 65 possible sky positions to use as objects from a possible 619. plFiberPlate : 45 possible sky positions to use as objects from a possible 618. plFiberPlate : 20 possible sky positions to use as objects from a possible 617. plFiberPlate : 19 possible sky positions to use as objects from a possible 616. plFiberPlate : 92 possible sky positions to use as objects from a possible 615. plFiberPlate : 84 possible sky positions to use as objects from a possible 614. plFiberPlate : 76 possible sky positions to use as objects from a possible 613. plFiberPlate : 61 possible sky positions to use as objects from a possible 612. plFiberPlate : 37 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 14 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : 24 possible sky positions to use as objects from a possible 607. plFiberPlate : 46 possible sky positions to use as objects from a possible 606. plFiberPlate : 57 possible sky positions to use as objects from a possible 605. plFiberPlate : 41 possible sky positions to use as objects from a possible 604. plFiberPlate : 27 possible sky positions to use as objects from a possible 603. plFiberPlate : 13 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 6 possible sky positions to use as objects from a possible 600. plFiberPlate : 5 possible sky positions to use as objects from a possible 599. plFiberPlate : 32 possible sky positions to use as objects from a possible 598. plFiberPlate : 25 possible sky positions to use as objects from a possible 597. plFiberPlate : 60 possible sky positions to use as objects from a possible 596. plFiberPlate : 49 possible sky positions to use as objects from a possible 595. plFiberPlate : 21 possible sky positions to use as objects from a possible 594. plFiberPlate : 11 possible sky positions to use as objects from a possible 593. plFiberPlate : 10 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 38 possible sky positions to use as objects from a possible 590. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2492.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2493.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2493.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2494.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 116 2 10 91 3 15 90 4 22 112 5 18 132 6 10 102 7 13 97 8 14 94 9 13 111 10 24 136 11 14 94 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 5 156 12 plFiberPlate : adding spectro-photo std with objId = 5360 40 1 154 54 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 104 49 plFiberPlate : adding spectro-photo std with objId = 5360 40 5 164 86 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 106 6 plFiberPlate : adding spectro-photo std with objId = 5381 40 5 109 69 plFiberPlate : adding spectro-photo std with objId = 5360 40 4 157 67 plFiberPlate : adding spectro-photo std with objId = 5360 40 3 168 47 plFiberPlate : 107 possible sky positions to use as objects from a possible 594. plFiberPlate : 66 possible sky positions to use as objects from a possible 593. plFiberPlate : 40 possible sky positions to use as objects from a possible 592. plFiberPlate : 27 possible sky positions to use as objects from a possible 591. plFiberPlate : 27 possible sky positions to use as objects from a possible 590. plFiberPlate : 33 possible sky positions to use as objects from a possible 589. plFiberPlate : 29 possible sky positions to use as objects from a possible 588. plFiberPlate : 56 possible sky positions to use as objects from a possible 587. plFiberPlate : 18 possible sky positions to use as objects from a possible 586. plFiberPlate : 10 possible sky positions to use as objects from a possible 585. plFiberPlate : 14 possible sky positions to use as objects from a possible 584. plFiberPlate : 7 possible sky positions to use as objects from a possible 583. plFiberPlate : 8 possible sky positions to use as objects from a possible 582. plFiberPlate : 3 possible sky positions to use as objects from a possible 581. plFiberPlate : 6 possible sky positions to use as objects from a possible 580. plFiberPlate : 16 possible sky positions to use as objects from a possible 579. plFiberPlate : 74 possible sky positions to use as objects from a possible 578. plFiberPlate : 26 possible sky positions to use as objects from a possible 577. plFiberPlate : 14 possible sky positions to use as objects from a possible 576. plFiberPlate : 13 possible sky positions to use as objects from a possible 575. plFiberPlate : 7 possible sky positions to use as objects from a possible 574. plFiberPlate : 9 possible sky positions to use as objects from a possible 573. plFiberPlate : 3 possible sky positions to use as objects from a possible 572. plFiberPlate : 8 possible sky positions to use as objects from a possible 571. plFiberPlate : 11 possible sky positions to use as objects from a possible 570. plFiberPlate : 54 possible sky positions to use as objects from a possible 569. plFiberPlate : 43 possible sky positions to use as objects from a possible 568. plFiberPlate : 31 possible sky positions to use as objects from a possible 567. plFiberPlate : 33 possible sky positions to use as objects from a possible 566. plFiberPlate : 6 possible sky positions to use as objects from a possible 565. plFiberPlate : 11 possible sky positions to use as objects from a possible 564. plFiberPlate : 18 possible sky positions to use as objects from a possible 563. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 675 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2493.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2494.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2494.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2495.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 134 2 12 103 3 9 110 4 11 113 5 15 124 6 6 103 7 9 91 8 10 101 9 10 100 10 12 174 11 8 119 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5225 41 3 41 48 plFiberPlate : adding spectro-photo std with objId = 5225 41 3 50 85 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 74 62 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 104 49 plFiberPlate : adding spectro-photo std with objId = 5225 41 4 49 30 plFiberPlate : adding spectro-photo std with objId = 5313 40 3 71 51 plFiberPlate : adding spectro-photo std with objId = 5313 40 5 67 21 plFiberPlate : adding spectro-photo std with objId = 5313 40 2 67 14 plFiberPlate : 127 possible sky positions to use as objects from a possible 633. plFiberPlate : 115 possible sky positions to use as objects from a possible 632. plFiberPlate : 64 possible sky positions to use as objects from a possible 631. plFiberPlate : 64 possible sky positions to use as objects from a possible 630. plFiberPlate : 24 possible sky positions to use as objects from a possible 629. plFiberPlate : 36 possible sky positions to use as objects from a possible 628. plFiberPlate : 38 possible sky positions to use as objects from a possible 627. plFiberPlate : 98 possible sky positions to use as objects from a possible 626. plFiberPlate : 52 possible sky positions to use as objects from a possible 625. plFiberPlate : 40 possible sky positions to use as objects from a possible 624. plFiberPlate : 26 possible sky positions to use as objects from a possible 623. plFiberPlate : 10 possible sky positions to use as objects from a possible 622. plFiberPlate : 21 possible sky positions to use as objects from a possible 621. plFiberPlate : 23 possible sky positions to use as objects from a possible 620. plFiberPlate : 22 possible sky positions to use as objects from a possible 619. plFiberPlate : 26 possible sky positions to use as objects from a possible 618. plFiberPlate : 54 possible sky positions to use as objects from a possible 617. plFiberPlate : 23 possible sky positions to use as objects from a possible 616. plFiberPlate : 11 possible sky positions to use as objects from a possible 615. plFiberPlate : 3 possible sky positions to use as objects from a possible 614. plFiberPlate : 15 possible sky positions to use as objects from a possible 613. plFiberPlate : 9 possible sky positions to use as objects from a possible 612. plFiberPlate : 4 possible sky positions to use as objects from a possible 611. plFiberPlate : 7 possible sky positions to use as objects from a possible 610. plFiberPlate : 13 possible sky positions to use as objects from a possible 609. plFiberPlate : 44 possible sky positions to use as objects from a possible 608. plFiberPlate : 39 possible sky positions to use as objects from a possible 607. plFiberPlate : 31 possible sky positions to use as objects from a possible 606. plFiberPlate : 18 possible sky positions to use as objects from a possible 605. plFiberPlate : 14 possible sky positions to use as objects from a possible 604. plFiberPlate : 17 possible sky positions to use as objects from a possible 603. plFiberPlate : 6 possible sky positions to use as objects from a possible 602. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 665 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2494.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2495.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2495.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2496.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 111 2 8 91 3 7 88 4 8 116 5 13 132 6 10 107 7 5 95 8 8 106 9 8 103 10 6 154 11 8 109 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 252 28 plFiberPlate : adding spectro-photo std with objId = 5225 41 6 41 41 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 257 58 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 260 94 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 253 25 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 267 28 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 253 53 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 381 58 plFiberPlate : 123 possible sky positions to use as objects from a possible 613. plFiberPlate : 54 possible sky positions to use as objects from a possible 612. plFiberPlate : 16 possible sky positions to use as objects from a possible 611. plFiberPlate : 27 possible sky positions to use as objects from a possible 610. plFiberPlate : 20 possible sky positions to use as objects from a possible 609. plFiberPlate : 19 possible sky positions to use as objects from a possible 608. plFiberPlate : 50 possible sky positions to use as objects from a possible 607. plFiberPlate : 100 possible sky positions to use as objects from a possible 606. plFiberPlate : 61 possible sky positions to use as objects from a possible 605. plFiberPlate : 38 possible sky positions to use as objects from a possible 604. plFiberPlate : 19 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 16 possible sky positions to use as objects from a possible 601. plFiberPlate : 17 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 18 possible sky positions to use as objects from a possible 598. plFiberPlate : 94 possible sky positions to use as objects from a possible 597. plFiberPlate : 58 possible sky positions to use as objects from a possible 596. plFiberPlate : 25 possible sky positions to use as objects from a possible 595. plFiberPlate : 20 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 8 possible sky positions to use as objects from a possible 592. plFiberPlate : 29 possible sky positions to use as objects from a possible 591. plFiberPlate : 20 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 59 possible sky positions to use as objects from a possible 588. plFiberPlate : 17 possible sky positions to use as objects from a possible 587. plFiberPlate : 36 possible sky positions to use as objects from a possible 586. plFiberPlate : 16 possible sky positions to use as objects from a possible 585. plFiberPlate : 12 possible sky positions to use as objects from a possible 584. plFiberPlate : 13 possible sky positions to use as objects from a possible 583. plFiberPlate : 16 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2495.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2496.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2496.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2497.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 121 2 11 79 3 7 91 4 9 107 5 10 122 6 9 103 7 8 94 8 10 107 9 6 108 10 11 141 11 11 99 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5140 40 5 131 68 plFiberPlate : adding spectro-photo std with objId = 5140 40 1 135 22 plFiberPlate : adding spectro-photo std with objId = 5140 40 1 126 10 plFiberPlate : adding spectro-photo std with objId = 5140 40 4 133 77 plFiberPlate : adding spectro-photo std with objId = 5140 40 5 129 24 plFiberPlate : adding spectro-photo std with objId = 5140 40 5 125 77 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 126 4 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 131 50 plFiberPlate : 115 possible sky positions to use as objects from a possible 605. plFiberPlate : 76 possible sky positions to use as objects from a possible 604. plFiberPlate : 30 possible sky positions to use as objects from a possible 603. plFiberPlate : 17 possible sky positions to use as objects from a possible 602. plFiberPlate : 41 possible sky positions to use as objects from a possible 601. plFiberPlate : 20 possible sky positions to use as objects from a possible 600. plFiberPlate : 57 possible sky positions to use as objects from a possible 599. plFiberPlate : 82 possible sky positions to use as objects from a possible 598. plFiberPlate : 44 possible sky positions to use as objects from a possible 597. plFiberPlate : 33 possible sky positions to use as objects from a possible 596. plFiberPlate : 17 possible sky positions to use as objects from a possible 595. plFiberPlate : 14 possible sky positions to use as objects from a possible 594. plFiberPlate : 22 possible sky positions to use as objects from a possible 593. plFiberPlate : 19 possible sky positions to use as objects from a possible 592. plFiberPlate : 16 possible sky positions to use as objects from a possible 591. plFiberPlate : 16 possible sky positions to use as objects from a possible 590. plFiberPlate : 84 possible sky positions to use as objects from a possible 589. plFiberPlate : 58 possible sky positions to use as objects from a possible 588. plFiberPlate : 32 possible sky positions to use as objects from a possible 587. plFiberPlate : 19 possible sky positions to use as objects from a possible 586. plFiberPlate : 13 possible sky positions to use as objects from a possible 585. plFiberPlate : 15 possible sky positions to use as objects from a possible 584. plFiberPlate : 29 possible sky positions to use as objects from a possible 583. plFiberPlate : 25 possible sky positions to use as objects from a possible 582. plFiberPlate : 15 possible sky positions to use as objects from a possible 581. plFiberPlate : 42 possible sky positions to use as objects from a possible 580. plFiberPlate : 33 possible sky positions to use as objects from a possible 579. plFiberPlate : 9 possible sky positions to use as objects from a possible 578. plFiberPlate : 11 possible sky positions to use as objects from a possible 577. plFiberPlate : 4 possible sky positions to use as objects from a possible 576. plFiberPlate : 12 possible sky positions to use as objects from a possible 575. plFiberPlate : 16 possible sky positions to use as objects from a possible 574. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2496.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2497.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2497.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2498.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 15 126 2 12 90 3 10 99 4 8 120 5 10 120 6 7 113 7 7 84 8 6 104 9 5 105 10 17 151 11 13 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 56 13 plFiberPlate : adding spectro-photo std with objId = 5313 40 4 88 17 plFiberPlate : adding spectro-photo std with objId = 5225 41 3 50 85 plFiberPlate : adding spectro-photo std with objId = 5225 41 4 49 30 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 54 91 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 122 70 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 381 21 plFiberPlate : adding spectro-photo std with objId = 5225 41 6 53 67 plFiberPlate : 149 possible sky positions to use as objects from a possible 620. plFiberPlate : 57 possible sky positions to use as objects from a possible 619. plFiberPlate : 17 possible sky positions to use as objects from a possible 618. plFiberPlate : 10 possible sky positions to use as objects from a possible 617. plFiberPlate : 19 possible sky positions to use as objects from a possible 616. plFiberPlate : 27 possible sky positions to use as objects from a possible 615. plFiberPlate : 70 possible sky positions to use as objects from a possible 614. plFiberPlate : 68 possible sky positions to use as objects from a possible 613. plFiberPlate : 59 possible sky positions to use as objects from a possible 612. plFiberPlate : 37 possible sky positions to use as objects from a possible 611. plFiberPlate : 11 possible sky positions to use as objects from a possible 610. plFiberPlate : 6 possible sky positions to use as objects from a possible 609. plFiberPlate : 5 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 17 possible sky positions to use as objects from a possible 606. plFiberPlate : 26 possible sky positions to use as objects from a possible 605. plFiberPlate : 57 possible sky positions to use as objects from a possible 604. plFiberPlate : 40 possible sky positions to use as objects from a possible 603. plFiberPlate : 30 possible sky positions to use as objects from a possible 602. plFiberPlate : 22 possible sky positions to use as objects from a possible 601. plFiberPlate : 9 possible sky positions to use as objects from a possible 600. plFiberPlate : 5 possible sky positions to use as objects from a possible 599. plFiberPlate : 17 possible sky positions to use as objects from a possible 598. plFiberPlate : 24 possible sky positions to use as objects from a possible 597. plFiberPlate : 10 possible sky positions to use as objects from a possible 596. plFiberPlate : 53 possible sky positions to use as objects from a possible 595. plFiberPlate : 26 possible sky positions to use as objects from a possible 594. plFiberPlate : 17 possible sky positions to use as objects from a possible 593. plFiberPlate : 16 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 5 possible sky positions to use as objects from a possible 590. plFiberPlate : 18 possible sky positions to use as objects from a possible 589. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2497.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2498.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2498.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2499.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 16 118 2 9 94 3 11 98 4 14 107 5 26 122 6 13 101 7 6 95 8 14 116 9 8 100 10 17 130 11 14 101 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 120 30 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 115 89 plFiberPlate : adding spectro-photo std with objId = 5360 40 2 173 19 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 128 26 plFiberPlate : adding spectro-photo std with objId = 5360 40 4 176 25 plFiberPlate : adding spectro-photo std with objId = 5381 40 2 125 20 plFiberPlate : adding spectro-photo std with objId = 5360 40 3 168 47 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 122 70 plFiberPlate : 117 possible sky positions to use as objects from a possible 604. plFiberPlate : 38 possible sky positions to use as objects from a possible 603. plFiberPlate : 23 possible sky positions to use as objects from a possible 602. plFiberPlate : 25 possible sky positions to use as objects from a possible 601. plFiberPlate : 16 possible sky positions to use as objects from a possible 600. plFiberPlate : 34 possible sky positions to use as objects from a possible 599. plFiberPlate : 39 possible sky positions to use as objects from a possible 598. plFiberPlate : 67 possible sky positions to use as objects from a possible 597. plFiberPlate : 30 possible sky positions to use as objects from a possible 596. plFiberPlate : 12 possible sky positions to use as objects from a possible 595. plFiberPlate : 5 possible sky positions to use as objects from a possible 594. plFiberPlate : 2 possible sky positions to use as objects from a possible 593. plFiberPlate : 5 possible sky positions to use as objects from a possible 592. plFiberPlate : 14 possible sky positions to use as objects from a possible 591. plFiberPlate : 16 possible sky positions to use as objects from a possible 590. plFiberPlate : 37 possible sky positions to use as objects from a possible 589. plFiberPlate : 46 possible sky positions to use as objects from a possible 588. plFiberPlate : 36 possible sky positions to use as objects from a possible 587. plFiberPlate : 9 possible sky positions to use as objects from a possible 586. plFiberPlate : 3 possible sky positions to use as objects from a possible 585. plFiberPlate : 3 possible sky positions to use as objects from a possible 584. plFiberPlate : 3 possible sky positions to use as objects from a possible 583. plFiberPlate : 12 possible sky positions to use as objects from a possible 582. plFiberPlate : 21 possible sky positions to use as objects from a possible 581. plFiberPlate : 12 possible sky positions to use as objects from a possible 580. plFiberPlate : 54 possible sky positions to use as objects from a possible 579. plFiberPlate : 46 possible sky positions to use as objects from a possible 578. plFiberPlate : 18 possible sky positions to use as objects from a possible 577. plFiberPlate : 23 possible sky positions to use as objects from a possible 576. plFiberPlate : 14 possible sky positions to use as objects from a possible 575. plFiberPlate : 20 possible sky positions to use as objects from a possible 574. plFiberPlate : 29 possible sky positions to use as objects from a possible 573. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 672 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2498.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2499.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2499.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2500.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 119 2 8 87 3 7 69 4 10 107 5 8 121 6 10 97 7 7 106 8 6 120 9 6 117 10 13 135 11 7 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 273 38 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 387 29 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 270 2 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 381 58 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 272 9 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 273 8 plFiberPlate : adding spectro-photo std with objId = 5225 41 6 53 67 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 381 21 plFiberPlate : 108 possible sky positions to use as objects from a possible 614. plFiberPlate : 46 possible sky positions to use as objects from a possible 613. plFiberPlate : 31 possible sky positions to use as objects from a possible 612. plFiberPlate : 15 possible sky positions to use as objects from a possible 611. plFiberPlate : 12 possible sky positions to use as objects from a possible 610. plFiberPlate : 26 possible sky positions to use as objects from a possible 609. plFiberPlate : 52 possible sky positions to use as objects from a possible 608. plFiberPlate : 102 possible sky positions to use as objects from a possible 607. plFiberPlate : 55 possible sky positions to use as objects from a possible 606. plFiberPlate : 24 possible sky positions to use as objects from a possible 605. plFiberPlate : 9 possible sky positions to use as objects from a possible 604. plFiberPlate : 12 possible sky positions to use as objects from a possible 603. plFiberPlate : 20 possible sky positions to use as objects from a possible 602. plFiberPlate : 17 possible sky positions to use as objects from a possible 601. plFiberPlate : 42 possible sky positions to use as objects from a possible 600. plFiberPlate : 14 possible sky positions to use as objects from a possible 599. plFiberPlate : 106 possible sky positions to use as objects from a possible 598. plFiberPlate : 78 possible sky positions to use as objects from a possible 597. plFiberPlate : 54 possible sky positions to use as objects from a possible 596. plFiberPlate : 34 possible sky positions to use as objects from a possible 595. plFiberPlate : 11 possible sky positions to use as objects from a possible 594. plFiberPlate : 26 possible sky positions to use as objects from a possible 593. plFiberPlate : 24 possible sky positions to use as objects from a possible 592. plFiberPlate : 16 possible sky positions to use as objects from a possible 591. plFiberPlate : 32 possible sky positions to use as objects from a possible 590. plFiberPlate : 46 possible sky positions to use as objects from a possible 589. plFiberPlate : 42 possible sky positions to use as objects from a possible 588. plFiberPlate : 24 possible sky positions to use as objects from a possible 587. plFiberPlate : 17 possible sky positions to use as objects from a possible 586. plFiberPlate : 31 possible sky positions to use as objects from a possible 585. plFiberPlate : 12 possible sky positions to use as objects from a possible 584. plFiberPlate : 11 possible sky positions to use as objects from a possible 583. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2499.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2500.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2500.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2501.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 134 2 6 109 3 5 89 4 5 113 5 8 122 6 8 100 7 7 93 8 5 116 9 7 104 10 12 151 11 6 123 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 141 34 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 140 21 plFiberPlate : adding spectro-photo std with objId = 5140 40 1 135 22 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 31 35 plFiberPlate : adding spectro-photo std with objId = 5140 40 4 133 77 plFiberPlate : adding spectro-photo std with objId = 5140 40 1 136 75 plFiberPlate : adding spectro-photo std with objId = 5140 40 2 131 50 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 137 31 plFiberPlate : 124 possible sky positions to use as objects from a possible 631. plFiberPlate : 86 possible sky positions to use as objects from a possible 630. plFiberPlate : 49 possible sky positions to use as objects from a possible 629. plFiberPlate : 23 possible sky positions to use as objects from a possible 628. plFiberPlate : 23 possible sky positions to use as objects from a possible 627. plFiberPlate : 33 possible sky positions to use as objects from a possible 626. plFiberPlate : 73 possible sky positions to use as objects from a possible 625. plFiberPlate : 88 possible sky positions to use as objects from a possible 624. plFiberPlate : 56 possible sky positions to use as objects from a possible 623. plFiberPlate : 33 possible sky positions to use as objects from a possible 622. plFiberPlate : 23 possible sky positions to use as objects from a possible 621. plFiberPlate : 9 possible sky positions to use as objects from a possible 620. plFiberPlate : 11 possible sky positions to use as objects from a possible 619. plFiberPlate : 29 possible sky positions to use as objects from a possible 618. plFiberPlate : 19 possible sky positions to use as objects from a possible 617. plFiberPlate : 30 possible sky positions to use as objects from a possible 616. plFiberPlate : 86 possible sky positions to use as objects from a possible 615. plFiberPlate : 59 possible sky positions to use as objects from a possible 614. plFiberPlate : 44 possible sky positions to use as objects from a possible 613. plFiberPlate : 25 possible sky positions to use as objects from a possible 612. plFiberPlate : 19 possible sky positions to use as objects from a possible 611. plFiberPlate : 3 possible sky positions to use as objects from a possible 610. plFiberPlate : 30 possible sky positions to use as objects from a possible 609. plFiberPlate : 20 possible sky positions to use as objects from a possible 608. plFiberPlate : 24 possible sky positions to use as objects from a possible 607. plFiberPlate : 36 possible sky positions to use as objects from a possible 606. plFiberPlate : 28 possible sky positions to use as objects from a possible 605. plFiberPlate : 11 possible sky positions to use as objects from a possible 604. plFiberPlate : 7 possible sky positions to use as objects from a possible 603. plFiberPlate : 5 possible sky positions to use as objects from a possible 602. plFiberPlate : 7 possible sky positions to use as objects from a possible 601. plFiberPlate : 22 possible sky positions to use as objects from a possible 600. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2500.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2501.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2501.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2502.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 129 2 9 96 3 14 103 4 11 116 5 11 114 6 11 100 7 7 98 8 7 103 9 8 110 10 16 160 11 13 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 130 6 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 56 13 plFiberPlate : adding spectro-photo std with objId = 5313 40 4 88 17 plFiberPlate : adding spectro-photo std with objId = 5313 40 3 98 65 plFiberPlate : adding spectro-photo std with objId = 5225 41 5 59 105 plFiberPlate : adding spectro-photo std with objId = 5225 41 4 64 77 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 94 15 plFiberPlate : adding spectro-photo std with objId = 5313 40 1 94 35 plFiberPlate : 136 possible sky positions to use as objects from a possible 630. plFiberPlate : 76 possible sky positions to use as objects from a possible 629. plFiberPlate : 34 possible sky positions to use as objects from a possible 628. plFiberPlate : 36 possible sky positions to use as objects from a possible 627. plFiberPlate : 23 possible sky positions to use as objects from a possible 626. plFiberPlate : 30 possible sky positions to use as objects from a possible 625. plFiberPlate : 77 possible sky positions to use as objects from a possible 624. plFiberPlate : 89 possible sky positions to use as objects from a possible 623. plFiberPlate : 85 possible sky positions to use as objects from a possible 622. plFiberPlate : 46 possible sky positions to use as objects from a possible 621. plFiberPlate : 16 possible sky positions to use as objects from a possible 620. plFiberPlate : 8 possible sky positions to use as objects from a possible 619. plFiberPlate : 21 possible sky positions to use as objects from a possible 618. plFiberPlate : 8 possible sky positions to use as objects from a possible 617. plFiberPlate : 30 possible sky positions to use as objects from a possible 616. plFiberPlate : 15 possible sky positions to use as objects from a possible 615. plFiberPlate : 76 possible sky positions to use as objects from a possible 614. plFiberPlate : 50 possible sky positions to use as objects from a possible 613. plFiberPlate : 35 possible sky positions to use as objects from a possible 612. plFiberPlate : 14 possible sky positions to use as objects from a possible 611. plFiberPlate : 10 possible sky positions to use as objects from a possible 610. plFiberPlate : 19 possible sky positions to use as objects from a possible 609. plFiberPlate : 11 possible sky positions to use as objects from a possible 608. plFiberPlate : 19 possible sky positions to use as objects from a possible 607. plFiberPlate : 9 possible sky positions to use as objects from a possible 606. plFiberPlate : 37 possible sky positions to use as objects from a possible 605. plFiberPlate : 41 possible sky positions to use as objects from a possible 604. plFiberPlate : 26 possible sky positions to use as objects from a possible 603. plFiberPlate : 29 possible sky positions to use as objects from a possible 602. plFiberPlate : 5 possible sky positions to use as objects from a possible 601. plFiberPlate : 14 possible sky positions to use as objects from a possible 600. plFiberPlate : 5 possible sky positions to use as objects from a possible 599. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2501.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2502.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2502.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2503.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 133 2 5 95 3 9 89 4 10 116 5 12 129 6 14 103 7 9 94 8 7 124 9 9 97 10 15 144 11 7 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 128 30 plFiberPlate : adding spectro-photo std with objId = 5360 40 4 176 25 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 128 77 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 134 51 plFiberPlate : adding spectro-photo std with objId = 5381 40 2 125 20 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 138 35 plFiberPlate : adding spectro-photo std with objId = 5313 40 1 94 35 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 132 32 plFiberPlate : 125 possible sky positions to use as objects from a possible 638. plFiberPlate : 60 possible sky positions to use as objects from a possible 637. plFiberPlate : 27 possible sky positions to use as objects from a possible 636. plFiberPlate : 14 possible sky positions to use as objects from a possible 635. plFiberPlate : 35 possible sky positions to use as objects from a possible 634. plFiberPlate : 7 possible sky positions to use as objects from a possible 633. plFiberPlate : 61 possible sky positions to use as objects from a possible 632. plFiberPlate : 85 possible sky positions to use as objects from a possible 631. plFiberPlate : 64 possible sky positions to use as objects from a possible 630. plFiberPlate : 53 possible sky positions to use as objects from a possible 629. plFiberPlate : 28 possible sky positions to use as objects from a possible 628. plFiberPlate : 6 possible sky positions to use as objects from a possible 627. plFiberPlate : 10 possible sky positions to use as objects from a possible 626. plFiberPlate : 4 possible sky positions to use as objects from a possible 625. plFiberPlate : 6 possible sky positions to use as objects from a possible 624. plFiberPlate : 58 possible sky positions to use as objects from a possible 623. plFiberPlate : 83 possible sky positions to use as objects from a possible 622. plFiberPlate : 57 possible sky positions to use as objects from a possible 621. plFiberPlate : 40 possible sky positions to use as objects from a possible 620. plFiberPlate : 12 possible sky positions to use as objects from a possible 619. plFiberPlate : 5 possible sky positions to use as objects from a possible 618. plFiberPlate : 4 possible sky positions to use as objects from a possible 617. plFiberPlate : 7 possible sky positions to use as objects from a possible 616. plFiberPlate : 13 possible sky positions to use as objects from a possible 615. plFiberPlate : 58 possible sky positions to use as objects from a possible 614. plFiberPlate : 26 possible sky positions to use as objects from a possible 613. plFiberPlate : 43 possible sky positions to use as objects from a possible 612. plFiberPlate : 22 possible sky positions to use as objects from a possible 611. plFiberPlate : 17 possible sky positions to use as objects from a possible 610. plFiberPlate : 18 possible sky positions to use as objects from a possible 609. plFiberPlate : 5 possible sky positions to use as objects from a possible 608. plFiberPlate : 35 possible sky positions to use as objects from a possible 607. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2502.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2503.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2503.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2504.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 118 2 7 86 3 6 85 4 10 118 5 9 125 6 3 103 7 7 89 8 10 112 9 7 109 10 16 139 11 12 96 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 279 24 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 276 17 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 386 71 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 286 47 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 387 29 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 98 40 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 273 8 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 392 20 plFiberPlate : 114 possible sky positions to use as objects from a possible 609. plFiberPlate : 59 possible sky positions to use as objects from a possible 608. plFiberPlate : 30 possible sky positions to use as objects from a possible 607. plFiberPlate : 13 possible sky positions to use as objects from a possible 606. plFiberPlate : 7 possible sky positions to use as objects from a possible 605. plFiberPlate : 24 possible sky positions to use as objects from a possible 604. plFiberPlate : 51 possible sky positions to use as objects from a possible 603. plFiberPlate : 100 possible sky positions to use as objects from a possible 602. plFiberPlate : 86 possible sky positions to use as objects from a possible 601. plFiberPlate : 47 possible sky positions to use as objects from a possible 600. plFiberPlate : 22 possible sky positions to use as objects from a possible 599. plFiberPlate : 6 possible sky positions to use as objects from a possible 598. plFiberPlate : 6 possible sky positions to use as objects from a possible 597. plFiberPlate : 30 possible sky positions to use as objects from a possible 596. plFiberPlate : 20 possible sky positions to use as objects from a possible 595. plFiberPlate : 44 possible sky positions to use as objects from a possible 594. plFiberPlate : 72 possible sky positions to use as objects from a possible 593. plFiberPlate : 72 possible sky positions to use as objects from a possible 592. plFiberPlate : 41 possible sky positions to use as objects from a possible 591. plFiberPlate : 24 possible sky positions to use as objects from a possible 590. plFiberPlate : 11 possible sky positions to use as objects from a possible 589. plFiberPlate : 30 possible sky positions to use as objects from a possible 588. plFiberPlate : 6 possible sky positions to use as objects from a possible 587. plFiberPlate : 27 possible sky positions to use as objects from a possible 586. plFiberPlate : 26 possible sky positions to use as objects from a possible 585. plFiberPlate : 54 possible sky positions to use as objects from a possible 584. plFiberPlate : 47 possible sky positions to use as objects from a possible 583. plFiberPlate : 35 possible sky positions to use as objects from a possible 582. plFiberPlate : 23 possible sky positions to use as objects from a possible 581. plFiberPlate : 10 possible sky positions to use as objects from a possible 580. plFiberPlate : 37 possible sky positions to use as objects from a possible 579. plFiberPlate : 22 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2503.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2504.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2504.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2505.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 141 2 10 92 3 9 87 4 9 120 5 10 127 6 11 108 7 5 95 8 3 109 9 7 104 10 15 144 11 12 110 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 141 12 plFiberPlate : adding spectro-photo std with objId = 5224 40 2 138 33 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 37 42 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 145 50 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 145 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 140 42 plFiberPlate : adding spectro-photo std with objId = 5116 40 4 31 35 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 137 31 plFiberPlate : 121 possible sky positions to use as objects from a possible 631. plFiberPlate : 68 possible sky positions to use as objects from a possible 630. plFiberPlate : 30 possible sky positions to use as objects from a possible 629. plFiberPlate : 20 possible sky positions to use as objects from a possible 628. plFiberPlate : 20 possible sky positions to use as objects from a possible 627. plFiberPlate : 28 possible sky positions to use as objects from a possible 626. plFiberPlate : 77 possible sky positions to use as objects from a possible 625. plFiberPlate : 104 possible sky positions to use as objects from a possible 624. plFiberPlate : 67 possible sky positions to use as objects from a possible 623. plFiberPlate : 38 possible sky positions to use as objects from a possible 622. plFiberPlate : 13 possible sky positions to use as objects from a possible 621. plFiberPlate : 13 possible sky positions to use as objects from a possible 620. plFiberPlate : 15 possible sky positions to use as objects from a possible 619. plFiberPlate : 22 possible sky positions to use as objects from a possible 618. plFiberPlate : 35 possible sky positions to use as objects from a possible 617. plFiberPlate : 27 possible sky positions to use as objects from a possible 616. plFiberPlate : 82 possible sky positions to use as objects from a possible 615. plFiberPlate : 60 possible sky positions to use as objects from a possible 614. plFiberPlate : 39 possible sky positions to use as objects from a possible 613. plFiberPlate : 18 possible sky positions to use as objects from a possible 612. plFiberPlate : 8 possible sky positions to use as objects from a possible 611. plFiberPlate : 5 possible sky positions to use as objects from a possible 610. plFiberPlate : 19 possible sky positions to use as objects from a possible 609. plFiberPlate : 18 possible sky positions to use as objects from a possible 608. plFiberPlate : 21 possible sky positions to use as objects from a possible 607. plFiberPlate : 49 possible sky positions to use as objects from a possible 606. plFiberPlate : 41 possible sky positions to use as objects from a possible 605. plFiberPlate : 25 possible sky positions to use as objects from a possible 604. plFiberPlate : 11 possible sky positions to use as objects from a possible 603. plFiberPlate : 10 possible sky positions to use as objects from a possible 602. plFiberPlate : 14 possible sky positions to use as objects from a possible 601. plFiberPlate : 16 possible sky positions to use as objects from a possible 600. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 674 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2504.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2505.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2505.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2506.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 9 113 2 5 77 3 2 93 4 4 135 5 9 139 6 7 108 7 3 99 8 12 103 9 6 109 10 8 157 11 6 100 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5225 41 4 80 49 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 141 39 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 82 7 plFiberPlate : adding spectro-photo std with objId = 5225 41 4 64 77 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 77 41 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 138 35 plFiberPlate : adding spectro-photo std with objId = 5313 40 5 109 100 plFiberPlate : adding spectro-photo std with objId = 5313 40 5 109 63 plFiberPlate : 142 possible sky positions to use as objects from a possible 638. plFiberPlate : 78 possible sky positions to use as objects from a possible 637. plFiberPlate : 31 possible sky positions to use as objects from a possible 636. plFiberPlate : 14 possible sky positions to use as objects from a possible 635. plFiberPlate : 23 possible sky positions to use as objects from a possible 634. plFiberPlate : 21 possible sky positions to use as objects from a possible 633. plFiberPlate : 39 possible sky positions to use as objects from a possible 632. plFiberPlate : 128 possible sky positions to use as objects from a possible 631. plFiberPlate : 65 possible sky positions to use as objects from a possible 630. plFiberPlate : 26 possible sky positions to use as objects from a possible 629. plFiberPlate : 13 possible sky positions to use as objects from a possible 628. plFiberPlate : 20 possible sky positions to use as objects from a possible 627. plFiberPlate : 6 possible sky positions to use as objects from a possible 626. plFiberPlate : 14 possible sky positions to use as objects from a possible 625. plFiberPlate : 21 possible sky positions to use as objects from a possible 624. plFiberPlate : 13 possible sky positions to use as objects from a possible 623. plFiberPlate : 82 possible sky positions to use as objects from a possible 622. plFiberPlate : 19 possible sky positions to use as objects from a possible 621. plFiberPlate : 15 possible sky positions to use as objects from a possible 620. plFiberPlate : 11 possible sky positions to use as objects from a possible 619. plFiberPlate : 6 possible sky positions to use as objects from a possible 618. plFiberPlate : 3 possible sky positions to use as objects from a possible 617. plFiberPlate : 3 possible sky positions to use as objects from a possible 616. plFiberPlate : 5 possible sky positions to use as objects from a possible 615. plFiberPlate : 13 possible sky positions to use as objects from a possible 614. plFiberPlate : 54 possible sky positions to use as objects from a possible 613. plFiberPlate : 52 possible sky positions to use as objects from a possible 612. plFiberPlate : 14 possible sky positions to use as objects from a possible 611. plFiberPlate : 6 possible sky positions to use as objects from a possible 610. plFiberPlate : 27 possible sky positions to use as objects from a possible 609. plFiberPlate : 12 possible sky positions to use as objects from a possible 608. plFiberPlate : 13 possible sky positions to use as objects from a possible 607. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2505.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2506.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2506.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2507.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 120 2 5 86 3 3 77 4 8 99 5 9 137 6 8 107 7 10 95 8 11 120 9 10 108 10 9 137 11 7 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 411 29 plFiberPlate : adding spectro-photo std with objId = 5194 40 1 399 5 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 409 7 plFiberPlate : adding spectro-photo std with objId = 5313 40 6 107 52 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 406 38 plFiberPlate : adding spectro-photo std with objId = 5183 40 5 286 47 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 411 15 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 407 62 plFiberPlate : 102 possible sky positions to use as objects from a possible 609. plFiberPlate : 64 possible sky positions to use as objects from a possible 608. plFiberPlate : 39 possible sky positions to use as objects from a possible 607. plFiberPlate : 22 possible sky positions to use as objects from a possible 606. plFiberPlate : 18 possible sky positions to use as objects from a possible 605. plFiberPlate : 30 possible sky positions to use as objects from a possible 604. plFiberPlate : 54 possible sky positions to use as objects from a possible 603. plFiberPlate : 92 possible sky positions to use as objects from a possible 602. plFiberPlate : 68 possible sky positions to use as objects from a possible 601. plFiberPlate : 45 possible sky positions to use as objects from a possible 600. plFiberPlate : 21 possible sky positions to use as objects from a possible 599. plFiberPlate : 3 possible sky positions to use as objects from a possible 598. plFiberPlate : 6 possible sky positions to use as objects from a possible 597. plFiberPlate : 27 possible sky positions to use as objects from a possible 596. plFiberPlate : 22 possible sky positions to use as objects from a possible 595. plFiberPlate : 35 possible sky positions to use as objects from a possible 594. plFiberPlate : 88 possible sky positions to use as objects from a possible 593. plFiberPlate : 79 possible sky positions to use as objects from a possible 592. plFiberPlate : 64 possible sky positions to use as objects from a possible 591. plFiberPlate : 33 possible sky positions to use as objects from a possible 590. plFiberPlate : 14 possible sky positions to use as objects from a possible 589. plFiberPlate : 3 possible sky positions to use as objects from a possible 588. plFiberPlate : 26 possible sky positions to use as objects from a possible 587. plFiberPlate : 23 possible sky positions to use as objects from a possible 586. plFiberPlate : 33 possible sky positions to use as objects from a possible 585. plFiberPlate : 64 possible sky positions to use as objects from a possible 584. plFiberPlate : 45 possible sky positions to use as objects from a possible 583. plFiberPlate : 13 possible sky positions to use as objects from a possible 582. plFiberPlate : 10 possible sky positions to use as objects from a possible 581. plFiberPlate : 7 possible sky positions to use as objects from a possible 580. plFiberPlate : 17 possible sky positions to use as objects from a possible 579. plFiberPlate : 21 possible sky positions to use as objects from a possible 578. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 669 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2506.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2507.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2507.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2508.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 14 120 2 11 102 3 11 96 4 13 100 5 11 123 6 14 110 7 8 109 8 10 127 9 10 117 10 16 156 11 13 111 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 1 192 35 plFiberPlate : adding spectro-photo std with objId = 5360 40 2 189 96 plFiberPlate : adding spectro-photo std with objId = 5381 40 2 147 63 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 139 45 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 141 39 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 149 12 plFiberPlate : adding spectro-photo std with objId = 5381 40 2 141 45 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 136 54 plFiberPlate : 104 possible sky positions to use as objects from a possible 649. plFiberPlate : 75 possible sky positions to use as objects from a possible 648. plFiberPlate : 54 possible sky positions to use as objects from a possible 647. plFiberPlate : 34 possible sky positions to use as objects from a possible 646. plFiberPlate : 42 possible sky positions to use as objects from a possible 645. plFiberPlate : 33 possible sky positions to use as objects from a possible 644. plFiberPlate : 25 possible sky positions to use as objects from a possible 643. plFiberPlate : 65 possible sky positions to use as objects from a possible 642. plFiberPlate : 42 possible sky positions to use as objects from a possible 641. plFiberPlate : 45 possible sky positions to use as objects from a possible 640. plFiberPlate : 27 possible sky positions to use as objects from a possible 639. plFiberPlate : 21 possible sky positions to use as objects from a possible 638. plFiberPlate : 12 possible sky positions to use as objects from a possible 637. plFiberPlate : 13 possible sky positions to use as objects from a possible 636. plFiberPlate : 9 possible sky positions to use as objects from a possible 635. plFiberPlate : 30 possible sky positions to use as objects from a possible 634. plFiberPlate : 70 possible sky positions to use as objects from a possible 633. plFiberPlate : 50 possible sky positions to use as objects from a possible 632. plFiberPlate : 44 possible sky positions to use as objects from a possible 631. plFiberPlate : 28 possible sky positions to use as objects from a possible 630. plFiberPlate : 18 possible sky positions to use as objects from a possible 629. plFiberPlate : 12 possible sky positions to use as objects from a possible 628. plFiberPlate : 5 possible sky positions to use as objects from a possible 627. plFiberPlate : 14 possible sky positions to use as objects from a possible 626. plFiberPlate : 25 possible sky positions to use as objects from a possible 625. plFiberPlate : 53 possible sky positions to use as objects from a possible 624. plFiberPlate : 35 possible sky positions to use as objects from a possible 623. plFiberPlate : 35 possible sky positions to use as objects from a possible 622. plFiberPlate : 10 possible sky positions to use as objects from a possible 621. plFiberPlate : 16 possible sky positions to use as objects from a possible 620. plFiberPlate : 26 possible sky positions to use as objects from a possible 619. plFiberPlate : 25 possible sky positions to use as objects from a possible 618. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2507.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2508.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2508.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2509.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 134 2 7 104 3 9 101 4 12 105 5 16 118 6 12 99 7 10 83 8 9 113 9 15 101 10 11 164 11 7 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5225 41 5 77 74 plFiberPlate : adding spectro-photo std with objId = 5225 41 6 83 34 plFiberPlate : adding spectro-photo std with objId = 5313 40 1 112 35 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 154 40 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 77 41 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 93 14 plFiberPlate : adding spectro-photo std with objId = 5313 40 5 109 100 plFiberPlate : adding spectro-photo std with objId = 5313 40 5 109 63 plFiberPlate : 127 possible sky positions to use as objects from a possible 613. plFiberPlate : 86 possible sky positions to use as objects from a possible 612. plFiberPlate : 50 possible sky positions to use as objects from a possible 611. plFiberPlate : 27 possible sky positions to use as objects from a possible 610. plFiberPlate : 35 possible sky positions to use as objects from a possible 609. plFiberPlate : 21 possible sky positions to use as objects from a possible 608. plFiberPlate : 73 possible sky positions to use as objects from a possible 607. plFiberPlate : 71 possible sky positions to use as objects from a possible 606. plFiberPlate : 41 possible sky positions to use as objects from a possible 605. plFiberPlate : 34 possible sky positions to use as objects from a possible 604. plFiberPlate : 28 possible sky positions to use as objects from a possible 603. plFiberPlate : 14 possible sky positions to use as objects from a possible 602. plFiberPlate : 7 possible sky positions to use as objects from a possible 601. plFiberPlate : 23 possible sky positions to use as objects from a possible 600. plFiberPlate : 32 possible sky positions to use as objects from a possible 599. plFiberPlate : 27 possible sky positions to use as objects from a possible 598. plFiberPlate : 63 possible sky positions to use as objects from a possible 597. plFiberPlate : 62 possible sky positions to use as objects from a possible 596. plFiberPlate : 43 possible sky positions to use as objects from a possible 595. plFiberPlate : 44 possible sky positions to use as objects from a possible 594. plFiberPlate : 24 possible sky positions to use as objects from a possible 593. plFiberPlate : 17 possible sky positions to use as objects from a possible 592. plFiberPlate : 15 possible sky positions to use as objects from a possible 591. plFiberPlate : 40 possible sky positions to use as objects from a possible 590. plFiberPlate : 27 possible sky positions to use as objects from a possible 589. plFiberPlate : 31 possible sky positions to use as objects from a possible 588. plFiberPlate : 15 possible sky positions to use as objects from a possible 587. plFiberPlate : 12 possible sky positions to use as objects from a possible 586. plFiberPlate : 15 possible sky positions to use as objects from a possible 585. plFiberPlate : 7 possible sky positions to use as objects from a possible 584. plFiberPlate : 10 possible sky positions to use as objects from a possible 583. plFiberPlate : 4 possible sky positions to use as objects from a possible 582. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 673 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2508.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2509.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2509.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2510.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 7 136 2 5 101 3 4 99 4 2 115 5 9 114 6 10 97 7 8 90 8 6 106 9 8 101 10 7 170 11 5 117 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 165 10 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 155 46 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 49 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 157 70 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 163 2 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 164 28 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 156 2 plFiberPlate : adding spectro-photo std with objId = 5116 40 5 56 52 plFiberPlate : 136 possible sky positions to use as objects from a possible 635. plFiberPlate : 77 possible sky positions to use as objects from a possible 634. plFiberPlate : 52 possible sky positions to use as objects from a possible 633. plFiberPlate : 26 possible sky positions to use as objects from a possible 632. plFiberPlate : 23 possible sky positions to use as objects from a possible 631. plFiberPlate : 55 possible sky positions to use as objects from a possible 630. plFiberPlate : 45 possible sky positions to use as objects from a possible 629. plFiberPlate : 116 possible sky positions to use as objects from a possible 628. plFiberPlate : 69 possible sky positions to use as objects from a possible 627. plFiberPlate : 43 possible sky positions to use as objects from a possible 626. plFiberPlate : 27 possible sky positions to use as objects from a possible 625. plFiberPlate : 11 possible sky positions to use as objects from a possible 624. plFiberPlate : 34 possible sky positions to use as objects from a possible 623. plFiberPlate : 16 possible sky positions to use as objects from a possible 622. plFiberPlate : 25 possible sky positions to use as objects from a possible 621. plFiberPlate : 23 possible sky positions to use as objects from a possible 620. plFiberPlate : 67 possible sky positions to use as objects from a possible 619. plFiberPlate : 37 possible sky positions to use as objects from a possible 618. plFiberPlate : 30 possible sky positions to use as objects from a possible 617. plFiberPlate : 10 possible sky positions to use as objects from a possible 616. plFiberPlate : 9 possible sky positions to use as objects from a possible 615. plFiberPlate : 13 possible sky positions to use as objects from a possible 614. plFiberPlate : 14 possible sky positions to use as objects from a possible 613. plFiberPlate : 17 possible sky positions to use as objects from a possible 612. plFiberPlate : 17 possible sky positions to use as objects from a possible 611. plFiberPlate : 42 possible sky positions to use as objects from a possible 610. plFiberPlate : 18 possible sky positions to use as objects from a possible 609. plFiberPlate : 10 possible sky positions to use as objects from a possible 608. plFiberPlate : 5 possible sky positions to use as objects from a possible 607. plFiberPlate : 12 possible sky positions to use as objects from a possible 606. plFiberPlate : 17 possible sky positions to use as objects from a possible 605. plFiberPlate : 11 possible sky positions to use as objects from a possible 604. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 668 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2509.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2510.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2510.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2511.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 11 111 2 14 95 3 8 90 4 5 101 5 3 123 6 9 104 7 9 97 8 9 111 9 8 119 10 18 155 11 11 105 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 409 7 plFiberPlate : adding spectro-photo std with objId = 5194 40 5 412 32 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 157 70 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 163 2 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 304 27 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 309 76 plFiberPlate : adding spectro-photo std with objId = 5194 40 3 411 15 plFiberPlate : adding spectro-photo std with objId = 5194 40 2 407 62 plFiberPlate : 106 possible sky positions to use as objects from a possible 606. plFiberPlate : 81 possible sky positions to use as objects from a possible 605. plFiberPlate : 72 possible sky positions to use as objects from a possible 604. plFiberPlate : 32 possible sky positions to use as objects from a possible 603. plFiberPlate : 36 possible sky positions to use as objects from a possible 602. plFiberPlate : 38 possible sky positions to use as objects from a possible 601. plFiberPlate : 39 possible sky positions to use as objects from a possible 600. plFiberPlate : 88 possible sky positions to use as objects from a possible 599. plFiberPlate : 80 possible sky positions to use as objects from a possible 598. plFiberPlate : 59 possible sky positions to use as objects from a possible 597. plFiberPlate : 46 possible sky positions to use as objects from a possible 596. plFiberPlate : 13 possible sky positions to use as objects from a possible 595. plFiberPlate : 25 possible sky positions to use as objects from a possible 594. plFiberPlate : 12 possible sky positions to use as objects from a possible 593. plFiberPlate : 18 possible sky positions to use as objects from a possible 592. plFiberPlate : 22 possible sky positions to use as objects from a possible 591. plFiberPlate : 81 possible sky positions to use as objects from a possible 590. plFiberPlate : 72 possible sky positions to use as objects from a possible 589. plFiberPlate : 51 possible sky positions to use as objects from a possible 588. plFiberPlate : 28 possible sky positions to use as objects from a possible 587. plFiberPlate : 15 possible sky positions to use as objects from a possible 586. plFiberPlate : 19 possible sky positions to use as objects from a possible 585. plFiberPlate : 22 possible sky positions to use as objects from a possible 584. plFiberPlate : 19 possible sky positions to use as objects from a possible 583. plFiberPlate : 13 possible sky positions to use as objects from a possible 582. plFiberPlate : 49 possible sky positions to use as objects from a possible 581. plFiberPlate : 46 possible sky positions to use as objects from a possible 580. plFiberPlate : 37 possible sky positions to use as objects from a possible 579. plFiberPlate : 19 possible sky positions to use as objects from a possible 578. plFiberPlate : 20 possible sky positions to use as objects from a possible 577. plFiberPlate : 10 possible sky positions to use as objects from a possible 576. plFiberPlate : 18 possible sky positions to use as objects from a possible 575. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 664 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2510.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2511.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2511.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2512.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 12 123 2 7 95 3 5 95 4 9 109 5 11 126 6 10 105 7 12 97 8 13 119 9 10 108 10 14 160 11 11 98 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5360 40 1 219 26 plFiberPlate : adding spectro-photo std with objId = 5381 40 1 155 10 plFiberPlate : adding spectro-photo std with objId = 5381 40 3 167 20 plFiberPlate : adding spectro-photo std with objId = 5360 40 3 218 91 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 160 42 plFiberPlate : adding spectro-photo std with objId = 5381 40 4 164 28 plFiberPlate : adding spectro-photo std with objId = 5381 40 3 159 44 plFiberPlate : adding spectro-photo std with objId = 5360 40 5 220 12 plFiberPlate : 116 possible sky positions to use as objects from a possible 618. plFiberPlate : 87 possible sky positions to use as objects from a possible 617. plFiberPlate : 46 possible sky positions to use as objects from a possible 616. plFiberPlate : 24 possible sky positions to use as objects from a possible 615. plFiberPlate : 28 possible sky positions to use as objects from a possible 614. plFiberPlate : 21 possible sky positions to use as objects from a possible 613. plFiberPlate : 37 possible sky positions to use as objects from a possible 612. plFiberPlate : 79 possible sky positions to use as objects from a possible 611. plFiberPlate : 68 possible sky positions to use as objects from a possible 610. plFiberPlate : 57 possible sky positions to use as objects from a possible 609. plFiberPlate : 41 possible sky positions to use as objects from a possible 608. plFiberPlate : 23 possible sky positions to use as objects from a possible 607. plFiberPlate : 24 possible sky positions to use as objects from a possible 606. plFiberPlate : 16 possible sky positions to use as objects from a possible 605. plFiberPlate : 6 possible sky positions to use as objects from a possible 604. plFiberPlate : 20 possible sky positions to use as objects from a possible 603. plFiberPlate : 69 possible sky positions to use as objects from a possible 602. plFiberPlate : 57 possible sky positions to use as objects from a possible 601. plFiberPlate : 43 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : 10 possible sky positions to use as objects from a possible 597. plFiberPlate : 7 possible sky positions to use as objects from a possible 596. plFiberPlate : 14 possible sky positions to use as objects from a possible 595. plFiberPlate : 21 possible sky positions to use as objects from a possible 594. plFiberPlate : 66 possible sky positions to use as objects from a possible 593. plFiberPlate : 27 possible sky positions to use as objects from a possible 592. plFiberPlate : 17 possible sky positions to use as objects from a possible 591. plFiberPlate : 8 possible sky positions to use as objects from a possible 590. plFiberPlate : 10 possible sky positions to use as objects from a possible 589. plFiberPlate : 15 possible sky positions to use as objects from a possible 588. plFiberPlate : 21 possible sky positions to use as objects from a possible 587. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2511.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2512.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2512.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2513.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 6 138 2 3 104 3 8 95 4 12 110 5 10 132 6 10 101 7 6 76 8 5 110 9 6 111 10 8 157 11 7 114 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5183 40 6 306 45 plFiberPlate : adding spectro-photo std with objId = 5194 40 6 421 12 plFiberPlate : adding spectro-photo std with objId = 5314 40 6 15 90 plFiberPlate : adding spectro-photo std with objId = 5183 40 2 309 76 plFiberPlate : adding spectro-photo std with objId = 5183 40 1 304 27 plFiberPlate : adding spectro-photo std with objId = 5183 40 4 319 2 plFiberPlate : adding spectro-photo std with objId = 5183 40 3 317 28 plFiberPlate : adding spectro-photo std with objId = 5194 40 4 422 28 plFiberPlate : 119 possible sky positions to use as objects from a possible 629. plFiberPlate : 96 possible sky positions to use as objects from a possible 628. plFiberPlate : 54 possible sky positions to use as objects from a possible 627. plFiberPlate : 27 possible sky positions to use as objects from a possible 626. plFiberPlate : 43 possible sky positions to use as objects from a possible 625. plFiberPlate : 15 possible sky positions to use as objects from a possible 624. plFiberPlate : 33 possible sky positions to use as objects from a possible 623. plFiberPlate : 100 possible sky positions to use as objects from a possible 622. plFiberPlate : 68 possible sky positions to use as objects from a possible 621. plFiberPlate : 40 possible sky positions to use as objects from a possible 620. plFiberPlate : 25 possible sky positions to use as objects from a possible 619. plFiberPlate : 6 possible sky positions to use as objects from a possible 618. plFiberPlate : 9 possible sky positions to use as objects from a possible 617. plFiberPlate : 11 possible sky positions to use as objects from a possible 616. plFiberPlate : 18 possible sky positions to use as objects from a possible 615. plFiberPlate : 25 possible sky positions to use as objects from a possible 614. plFiberPlate : 75 possible sky positions to use as objects from a possible 613. plFiberPlate : 53 possible sky positions to use as objects from a possible 612. plFiberPlate : 32 possible sky positions to use as objects from a possible 611. plFiberPlate : 20 possible sky positions to use as objects from a possible 610. plFiberPlate : 13 possible sky positions to use as objects from a possible 609. plFiberPlate : 8 possible sky positions to use as objects from a possible 608. plFiberPlate : 5 possible sky positions to use as objects from a possible 607. plFiberPlate : 8 possible sky positions to use as objects from a possible 606. plFiberPlate : 41 possible sky positions to use as objects from a possible 605. plFiberPlate : 49 possible sky positions to use as objects from a possible 604. plFiberPlate : 33 possible sky positions to use as objects from a possible 603. plFiberPlate : 8 possible sky positions to use as objects from a possible 602. plFiberPlate : 10 possible sky positions to use as objects from a possible 601. plFiberPlate : 4 possible sky positions to use as objects from a possible 600. plFiberPlate : 7 possible sky positions to use as objects from a possible 599. plFiberPlate : 8 possible sky positions to use as objects from a possible 598. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 667 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2512.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2513.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2513.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2514.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 10 146 2 5 91 3 3 95 4 6 123 5 7 131 6 6 97 7 7 88 8 11 127 9 5 106 10 9 146 11 6 102 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 1 173 29 plFiberPlate : adding spectro-photo std with objId = 5116 40 6 66 27 plFiberPlate : adding spectro-photo std with objId = 5116 40 1 59 39 plFiberPlate : adding spectro-photo std with objId = 5224 40 2 177 44 plFiberPlate : adding spectro-photo std with objId = 5224 40 6 167 4 plFiberPlate : adding spectro-photo std with objId = 5224 40 4 164 28 plFiberPlate : adding spectro-photo std with objId = 5224 40 3 170 12 plFiberPlate : adding spectro-photo std with objId = 5116 40 5 56 52 plFiberPlate : 136 possible sky positions to use as objects from a possible 641. plFiberPlate : 64 possible sky positions to use as objects from a possible 640. plFiberPlate : 26 possible sky positions to use as objects from a possible 639. plFiberPlate : 22 possible sky positions to use as objects from a possible 638. plFiberPlate : 10 possible sky positions to use as objects from a possible 637. plFiberPlate : 22 possible sky positions to use as objects from a possible 636. plFiberPlate : 30 possible sky positions to use as objects from a possible 635. plFiberPlate : 87 possible sky positions to use as objects from a possible 634. plFiberPlate : 68 possible sky positions to use as objects from a possible 633. plFiberPlate : 45 possible sky positions to use as objects from a possible 632. plFiberPlate : 4 possible sky positions to use as objects from a possible 631. plFiberPlate : 13 possible sky positions to use as objects from a possible 630. plFiberPlate : 10 possible sky positions to use as objects from a possible 629. plFiberPlate : 10 possible sky positions to use as objects from a possible 628. plFiberPlate : 3 possible sky positions to use as objects from a possible 627. plFiberPlate : 46 possible sky positions to use as objects from a possible 626. plFiberPlate : 90 possible sky positions to use as objects from a possible 625. plFiberPlate : 61 possible sky positions to use as objects from a possible 624. plFiberPlate : 37 possible sky positions to use as objects from a possible 623. plFiberPlate : 14 possible sky positions to use as objects from a possible 622. plFiberPlate : 4 possible sky positions to use as objects from a possible 621. plFiberPlate : 6 possible sky positions to use as objects from a possible 620. plFiberPlate : 10 possible sky positions to use as objects from a possible 619. plFiberPlate : 19 possible sky positions to use as objects from a possible 618. plFiberPlate : 37 possible sky positions to use as objects from a possible 617. plFiberPlate : 45 possible sky positions to use as objects from a possible 616. plFiberPlate : 20 possible sky positions to use as objects from a possible 615. plFiberPlate : 17 possible sky positions to use as objects from a possible 614. plFiberPlate : 12 possible sky positions to use as objects from a possible 613. plFiberPlate : 3 possible sky positions to use as objects from a possible 612. plFiberPlate : 2 possible sky positions to use as objects from a possible 611. plFiberPlate : 6 possible sky positions to use as objects from a possible 610. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 666 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2513.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2514.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2514.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.04.1/plPlugMapP-2515.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 8 132 2 12 106 3 6 94 4 9 107 5 8 120 6 2 83 7 3 84 8 9 110 9 9 110 10 10 152 11 6 107 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 5225 41 3 94 4 plFiberPlate : adding spectro-photo std with objId = 5225 41 5 99 52 plFiberPlate : adding spectro-photo std with objId = 5314 40 6 15 90 plFiberPlate : adding spectro-photo std with objId = 5314 40 2 21 55 plFiberPlate : adding spectro-photo std with objId = 5314 40 4 23 41 plFiberPlate : adding spectro-photo std with objId = 5314 40 4 12 26 plFiberPlate : adding spectro-photo std with objId = 5381 40 6 160 42 plFiberPlate : adding spectro-photo std with objId = 5225 41 2 93 14 plFiberPlate : 106 possible sky positions to use as objects from a possible 619. plFiberPlate : 85 possible sky positions to use as objects from a possible 618. plFiberPlate : 56 possible sky positions to use as objects from a possible 617. plFiberPlate : 15 possible sky positions to use as objects from a possible 616. plFiberPlate : 35 possible sky positions to use as objects from a possible 615. plFiberPlate : 36 possible sky positions to use as objects from a possible 614. plFiberPlate : 36 possible sky positions to use as objects from a possible 613. plFiberPlate : 58 possible sky positions to use as objects from a possible 612. plFiberPlate : 66 possible sky positions to use as objects from a possible 611. plFiberPlate : 46 possible sky positions to use as objects from a possible 610. plFiberPlate : 22 possible sky positions to use as objects from a possible 609. plFiberPlate : 12 possible sky positions to use as objects from a possible 608. plFiberPlate : 9 possible sky positions to use as objects from a possible 607. plFiberPlate : 11 possible sky positions to use as objects from a possible 606. plFiberPlate : 8 possible sky positions to use as objects from a possible 605. plFiberPlate : 26 possible sky positions to use as objects from a possible 604. plFiberPlate : 96 possible sky positions to use as objects from a possible 603. plFiberPlate : 63 possible sky positions to use as objects from a possible 602. plFiberPlate : 43 possible sky positions to use as objects from a possible 601. plFiberPlate : 39 possible sky positions to use as objects from a possible 600. plFiberPlate : 24 possible sky positions to use as objects from a possible 599. plFiberPlate : 14 possible sky positions to use as objects from a possible 598. plFiberPlate : 18 possible sky positions to use as objects from a possible 597. plFiberPlate : 16 possible sky positions to use as objects from a possible 596. plFiberPlate : 36 possible sky positions to use as objects from a possible 595. plFiberPlate : 20 possible sky positions to use as objects from a possible 594. plFiberPlate : 10 possible sky positions to use as objects from a possible 593. plFiberPlate : 11 possible sky positions to use as objects from a possible 592. plFiberPlate : 10 possible sky positions to use as objects from a possible 591. plFiberPlate : 8 possible sky positions to use as objects from a possible 590. plFiberPlate : 8 possible sky positions to use as objects from a possible 589. plFiberPlate : 8 possible sky positions to use as objects from a possible 588. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 671 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2514.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2515.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.04.1/plOverlay-2515.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Tue Apr 4 17:04:00 CDT 2006 Begin running "makeFanuc -verbose=2" Executing commands in /fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_21/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_21/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /fnal/ups/prd/astrotools/v5_21Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 39 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2477.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.5497,1.7028) and (12.79,0.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2477.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2477.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2478.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2478.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2478.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2479.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8444,-4.2362) and (12.33,-2.82) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2479.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2479.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2480.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2480.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2480.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2481.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2481.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2481.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2482.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.0643,-6.2583) and (11.58,-4.66) plMakeFanucCodes : fixed path between (-12.4446,1.9616) and (-12.78,0.41) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2482.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2482.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2483.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2483.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2483.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 8 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2484.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2484.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2484.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2485.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.1029,9.8594) and (6.14,10.90) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2485.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2485.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2486.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2486.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2486.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2487.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2487.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2487.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.7117,-7.4078) and (1.86,-12.30) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 15 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2488.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2488.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2488.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2489.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2489.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6269,10.9091) and (-12.33,-2.16) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2489.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2490.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.7448,-11.2401) and (4.36,-11.99) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2490.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2490.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2491.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.1440,-7.8117) and (-10.60,-6.34) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2491.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2491.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2492.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.7985,-11.4798) and (-3.79,-12.19) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2492.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2492.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2493.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (10.3409,7.5479) and (10.93,6.30) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2493.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2493.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 13 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2494.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2494.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2494.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 3 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 3 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2495.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.0014,11.7832) and (-4.01,12.10) plMakeFanucCodes : fixed path between (8.4884,-9.3626) and (6.77,-10.72) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2495.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2495.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2496.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.8573,-4.8014) and (12.20,-3.55) plMakeFanucCodes : fixed path between (12.1971,-3.5487) and (12.49,-2.67) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2496.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2496.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2497.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2497.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2497.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2498.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2498.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2498.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 10 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2499.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4492,5.1753) and (12.26,3.47) plMakeFanucCodes : fixed path between (12.2596,3.4726) and (12.43,2.98) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2499.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2499.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2500.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.9384,6.5866) and (-11.29,5.60) plMakeFanucCodes : fixed path between (11.7102,-5.0334) and (11.93,-4.43) plMakeFanucCodes : fixed path between (11.9306,-4.4298) and (12.48,-2.77) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2500.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2500.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2501.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-3.1619,-12.3460) and (-1.32,-12.72) plMakeFanucCodes : fixed path between (-10.6165,7.1259) and (-11.65,4.85) plMakeFanucCodes : fixed path between (-12.2636,3.0667) and (-12.78,0.40) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2501.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2501.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.5285,9.4947) and (-0.46,11.72) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2502.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (5.0539,-11.6556) and (2.72,-12.42) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2502.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2502.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2503.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2503.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2503.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2504.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-11.8585,4.7357) and (-12.24,3.05) plMakeFanucCodes : fixed path between (-12.4762,2.4215) and (-12.69,1.45) plMakeFanucCodes : fixed path between (12.6548,1.7998) and (12.79,0.46) plMakeFanucCodes : fixed path between (6.0127,-10.9713) and (4.58,-11.77) plMakeFanucCodes : fixed path between (7.0221,9.8823) and (4.42,11.92) plMakeFanucCodes : fixed path between (-8.9977,9.1005) and (-10.48,7.35) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2504.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2504.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 6 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 12 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2505.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-7.9010,-9.9707) and (-5.85,-10.70) plMakeFanucCodes : fixed path between (10.1012,-7.8651) and (10.47,-7.35) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2505.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (4.8345,10.7076) and (1.64,12.66) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2505.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-6.6983,10.4711) and (1.88,12.39) plMakeFanucCodes : fixed path between (7.5583,-8.9220) and (3.29,-12.18) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 3 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2506.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (3.9691,11.9195) and (-0.27,12.47) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2506.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2506.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 7 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2507.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2507.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2507.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2508.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2508.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2508.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 11 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2509.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-5.3013,-11.1146) and (-3.76,-12.13) plMakeFanucCodes : fixed path between (2.0212,12.5748) and (0.43,12.79) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2509.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2509.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 2 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 6 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2510.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (12.0691,-4.2289) and (12.44,-2.93) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2510.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2510.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 2 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : skipping annealing of light trap path; tclplDrillPath : only 2 holes (need > 3) tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2511.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-4.0276,11.8717) and (-2.38,12.51) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2511.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2511.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2512.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2512.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2512.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 5 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2513.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (-10.6623,7.0202) and (-11.07,6.22) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2513.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2513.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 4 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2514.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2514.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2514.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 9 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2515.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (8.4560,-9.6086) and (7.53,-10.32) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2515.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.04.1/plFanuc-2515.par plMakeFanucCodes : temperature difference 16.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00033984 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : done --------------------------------------------------------------- Tue Apr 4 17:05:37 CDT 2006 Begin running "makeDrillPos -verbose=2" Executing commands in /fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_21/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_21/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /fnal/ups/prd/astrotools/v5_21Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xabed00c makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 39 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2477 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2478 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2479 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2480 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2481 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2482 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2483 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2484 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 670 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2485 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2486 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2487 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2488 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 677 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2489 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2490 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2491 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2492 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2493 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2494 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 675 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2495 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 665 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2496 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2497 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2498 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2499 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 672 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2500 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2501 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2502 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2503 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2504 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2505 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 674 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2506 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2507 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 669 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2508 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2509 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 673 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2510 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 668 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2511 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 664 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2512 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2513 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 667 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2514 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 666 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2515 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 4 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 671 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Tue Apr 4 17:06:12 CDT 2006 Begin running "plateEnder dr2006.04.1 -morePipes 1" Executing commands in /fnal/ups/prd/dervish/v8_18Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_21/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_21/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /fnal/ups/prd/astrotools/v5_21Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2006.04.1 -morePipes 1" failed. PS: Read file for stderr output of this job.