Sender: LSF System Subject: Job 107971: Exited Job was submitted from host by user . Job was executed on host(s) , in queue , as user . was used as the home directory. was used as the working directory. Started at Sat Aug 5 15:29:45 2006 Results reported at Sat Aug 5 15:33:29 2006 Your job looked like: ------------------------------------------------------------ # LSBATCH: User input #!/usr/local/bin/bash . /fnal/ups/etc/setups.sh ulimit -d unlimited -s unlimited -c 0 umask 002 echo -e "---------------------------------------------------------------" date echo -e "Begin setup of products needed" setup dp setup plate echo -e "Done setup of products needed" echo -e "---------------------------------------------------------------" date echo -e "PATH = $PATH" echo -e "---------------------------------------------------------------" date printenv | grep _DIR | sort echo -e "---------------------------------------------------------------" echo -e "Kerberos Data: (klist -f)" /usr/krb5/bin/klist -f echo -e "---------------------------------------------------------------" cd /opdb/d1/data/drillRuns/dr2006.08.1 echo --------------------------------------------------------------- date echo Begin running plate echo --------------------------------------------------------------- date echo "Begin running \"makePlates -verbose=2\"" plate -noTk -command "makePlates -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makePlates -verbose=2\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"fiberPlates -verbose=2 -skipBrightCheck\"" plate -noTk -command "fiberPlates -verbose=2 -skipBrightCheck" if [ $? -ne 0 ] then echo "Error: \"fiberPlates -verbose=2 -skipBrightCheck\" failed." exit 1 fi echo --------------------------------------------------------------- date echo "Begin running \"makeFanuc -verbose=2\"" plate -noTk -command "makeFanuc -verbose=2" if [ $? -ne 0 ] then echo "Error: \"makeFanuc -verbose=2\" failed." exit 1 (... more ...) ------------------------------------------------------------ Exited with exit code 1. Resource usage summary: CPU time : 115.74 sec. Max Memory : 11 MB Max Swap : 29 MB Max Processes : 5 The output (if any) follows: --------------------------------------------------------------- Sat Aug 5 15:30:12 CDT 2006 Begin setup of products needed Done setup of products needed --------------------------------------------------------------- Sat Aug 5 15:31:00 CDT 2006 PATH = /sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2/bin:/sdss/ups/prd/xanim/v2_70_64/Linux/bin:/sdss/ups/prd/xfig/v3_20/Linux-2/bin:/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/imagelibs/v1_0/Linux-2:/sdss/ups/prd/ximagetools/v4_0/NULL/bin:/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/etc:/sdss/ups/prd/ghostscript/v5_50/Linux-2/bin:/sdss/ups/prd/ghostview/v3_5_8/Linux-2/bin:/sdss/ups/prd/encp/v3_5e/Linux-2-4-2-3-2:/fnal/ups/prd/ups/v4_7_1Linux-2/bin:/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/bin:/sdss/ups/prd/lsf/v5_1/Linux+2.4-2.3.2/i686/etc:/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2/bin:/fnal/ups/prd/flpr/v1_12Linux-2/bin:/fnal/ups/prd/xemacs/v20_4Linux-2/bin/plat:/usr/krb5/bin:/home/s1/hlin/bin:/usr/krb5/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/usr/sbin:/etc:/usr/etc:/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:.:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/acroread/v4_0_5/Linux/bin:/usr/java/j2sdk1.4.1_01/jre/bin:/export/scratch/hlin/d5/stsdas/bin:/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2/bin:/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2/bin:/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/specflat/v1_5/NULL/bin:/data/dp39.c/data/spectro/fspeclog/bin:/sdss/ups/prd/idl/v5_4/Linux/idl_5.4/bin:/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2/bin:/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ucac/v14_0/NULL/bin:/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dp/v18_49/NULL/bin:/home/s1/sdssdp/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2/bin:/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2/dst:/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2/bin:/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2/bin:/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/bin:/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2/bin:/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/bin:/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/bin --------------------------------------------------------------- Sat Aug 5 15:31:01 CDT 2006 ACROREAD_DIR=/sdss/ups/prd/acroread/v4_0_5/Linux ASTROM_DIR=/sdss/ups/prd/astrom/v3_8g/Linux-2-4-2-3-2 ASTROTOOLS_DIR=/sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2 DERVISH_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2 DP_DIR=/sdss/ups/prd/dp/v18_49/NULL DUST_DIR=/sdss/ups/prd/dust/v1_0/NULL ELODIE_DIR=/sdss/ups/prd/elodie/v1_0/NULL ENCP_DIR=/sdss/ups/prd/encp/v3_5e/Linux-2-4-2-3-2 FFTW_DIR=/sdss/ups/prd/fftw/v1_6/Linux-2-4-2-3-2 FLPR_DIR=/fnal/ups/prd/flpr/v1_12Linux-2 FPGPLOT_DIR=/sdss/ups/prd/fpgplot/v5_2_2/Linux-2-4-2-3-2 FSAO_DIR=/sdss/ups/prd/fsao/v3_14a/Linux-2-4-2-3-2 FSLALIB_DIR=/sdss/ups/prd/fslalib/v2_1_2b/Linux-2-4-2-3-2 FSPECLOG_DIR=/data/dp39.c/data/spectro/fspeclog FTCL_DIR=/sdss/ups/prd/ftcl/v3_6/Linux-2-4-2-3-2 GHOSTSCRIPT_DIR=/sdss/ups/prd/ghostscript/v5_50/Linux-2 GHOSTVIEW_DIR=/sdss/ups/prd/ghostview/v3_5_8/Linux-2 IDL_DIR=/sdss/ups/prd/idl/v5_4/Linux/idl_5.4 IDLSPEC2D_DIR=/sdss/ups/prd/idlspec2d/VV4_10_4/Linux-2-4-2-3-2 IDLUTILS_DIR=/sdss/ups/prd/idlutils/v4_10_1/Linux-2-4-2-3-2 IMAGELIBS_DIR=/sdss/ups/prd/imagelibs/v1_0/Linux-2 IMAGEMAGICK_DIR=/sdss/ups/prd/imagemagick/v6_2_6_1/Linux-2-4-2-3-2 INT_DIR=/sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/doc/www/dervish.home.html JHEAD_DIR=/sdss/ups/prd/jhead/v2_3/Linux-2-4-2-3-2 JPEG_DIR=/sdss/ups/prd/jpeg/v6_0b/Linux-2-4-2-3-2 KCORRECT_DIR=/data/dp0.a/users/hlin/d5/kcorrect LAPACK_DIR=/sdss/ups/prd/lapack/v3_0_2/Linux-2-4-2-3-2 LIBFITS_DIR=/sdss/ups/prd/libfits/v2_5/Linux-2-4-2-3-2 LSF_DIR=/sdss/ups/prd/lsf/v5_1/Linux-2-4-2-3-2/i686 LYNX_DIR=/sdss/ups/prd/lynx/v2_8_5/Linux-2-4-2-3-2 MT_DIR=/sdss/ups/prd/mt/v8_3/Linux-2-4-2-3-2 MTSTDS_DIR=/sdss/ups/prd/mtstds/v3_9/NULL NFCALIB_DIR=/sdss/ups/prd/nfcalib/v2_2/NULL PGPLOT_DIR=/sdss/ups/prd/pgplot/v5_2_2/Linux-2-4-2-3-2 PHOTO_DIR=/sdss/ups/prd/photo/v5_4_28b/Linux-2-4-2-3-2 PLATE_DIR=/sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2 RSI_DIR=/sdss/ups/prd/idl/v5_4/Linux SDSSMATH_DIR=/sdss/ups/prd/sdssmath/v5_15/Linux-2-4-2-3-2 SDSSTOOLS_DIR=/sdss/ups/prd/sdsstools/v4_27/Linux-2-4-2-3-2 SETUPS_DIR=/fnal/ups/etc SLALIB_DIR=/sdss/ups/prd/slalib/v2_1_2b/Linux-2-4-2-3-2 SLATEC_DIR=/sdss/ups/prd/slatec/v0_9b/Linux-2-4-2-3-2 SM_DIR=/sdss/ups/prd/sm/v2_4_27/Linux-2-4-2-3-2 SPECFLAT_DIR=/sdss/ups/prd/specflat/v1_5/NULL SPECIALSTRIPES_DIR=/sdss/ups/prd/specialStripes/v1_3/NULL SPECTRO_DIR=/sdss/ups/prd/spectro/v5_9_4/Linux-2-4-2-3-2 SSC_DIR=/sdss/ups/prd/ssc/v5_3_4/Linux-2-4-2-3-2 TCL_DIR=/sdss/ups/prd/tcl/v7_4dfa/Linux-2-4-2-3-2 TCLX_DIR=/sdss/ups/prd/tclx/v7_4adfa_2/Linux-2-4-2-3-2 TK_DIR=/sdss/ups/prd/tk/v4_0dfa/Linux-2-4-2-3-2 TYCHO2_DIR=/sdss/ups/prd/tycho2/v1_0/NULL UCAC_DIR=/sdss/ups/prd/ucac/v14_0/NULL UPS_DIR=/fnal/ups/prd/ups/v4_7_1Linux-2 XANIM_DIR=/sdss/ups/prd/xanim/v2_70_64/Linux XEMACS_DIR=/fnal/ups/prd/xemacs/v20_4Linux-2 XFIG_DIR=/sdss/ups/prd/xfig/v3_20/Linux-2 XIMAGETOOLS_DIR=/sdss/ups/prd/ximagetools/v4_0/NULL --------------------------------------------------------------- Kerberos Data: (klist -f) --------------------------------------------------------------- --------------------------------------------------------------- Sat Aug 5 15:31:03 CDT 2006 Begin running plate --------------------------------------------------------------- Sat Aug 5 15:31:03 CDT 2006 Begin running "makePlates -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makePlates : done parsing args, starting program makePlates : running with verbose level 2 makePlates : loading plate distort structs makePlates : distortion struct for optical distortion: (h2).parity 1 (h2).scale 217.7358 (h2).xCenter 0 (h2).yCenter 0 (h2).coeff 0x98b1d2c makePlates : beginning loop over plObs chain; makePlates : making 10 plates makePlates : making a plate from ./plPlugMapT-8220.par makePlates : plateInfo struct for plate 2550 : (h4).mjd 54252 (h4).raCen 247.152 (h4).decCen 62.846 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 247.152 62.846 247.152 64.346 plMakePlateFromTile : mjd of obs : 54252.698818 Observed HA/dec of plate center, fiducial point (deg) : -0.002 62.818 0.002 64.318 The rotation angle of the fid. point is 179.925075 plMakePlateFromTile : beginning loop over 1645 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8221.par makePlates : plateInfo struct for plate 2551 : (h4).mjd 54252 (h4).raCen 262.566 (h4).decCen 64.3689 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 262.566 64.369 262.566 65.869 plMakePlateFromTile : mjd of obs : 54252.741485 Observed HA/dec of plate center, fiducial point (deg) : -0.002 64.350 0.003 65.849 The rotation angle of the fid. point is 179.913231 plMakePlateFromTile : beginning loop over 2126 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8222.par makePlates : plateInfo struct for plate 2552 : (h4).mjd 54252 (h4).raCen 278.721 (h4).decCen 64.1545 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 278.721 64.154 278.721 65.654 plMakePlateFromTile : mjd of obs : 54252.786233 Observed HA/dec of plate center, fiducial point (deg) : -0.002 64.146 0.003 65.645 The rotation angle of the fid. point is 179.911619 plMakePlateFromTile : beginning loop over 1892 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8223.par makePlates : plateInfo struct for plate 2553 : (h4).mjd 53973 (h4).raCen 291.689 (h4).decCen 62.6099 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 291.689 62.610 291.689 64.110 plMakePlateFromTile : mjd of obs : 53973.586692 Observed HA/dec of plate center, fiducial point (deg) : -0.002 62.616 0.002 64.115 The rotation angle of the fid. point is 179.927045 plMakePlateFromTile : beginning loop over 1904 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8224.par makePlates : plateInfo struct for plate 2554 : (h4).mjd 53973 (h4).raCen 302.974 (h4).decCen 60.0073 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 302.974 60.007 302.974 61.507 plMakePlateFromTile : mjd of obs : 53973.617988 Observed HA/dec of plate center, fiducial point (deg) : -0.002 60.020 0.001 61.519 The rotation angle of the fid. point is 179.938813 plMakePlateFromTile : beginning loop over 1389 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8225.par makePlates : plateInfo struct for plate 2555 : (h4).mjd 53973 (h4).raCen 312.386 (h4).decCen 56.5944 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 312.386 56.594 312.386 58.094 plMakePlateFromTile : mjd of obs : 53973.644094 Observed HA/dec of plate center, fiducial point (deg) : -0.002 56.613 0.000 58.112 The rotation angle of the fid. point is 179.949872 plMakePlateFromTile : beginning loop over 1916 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8226.par makePlates : plateInfo struct for plate 2556 : (h4).mjd 53973 (h4).raCen 330.154 (h4).decCen 45.0621 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 330.154 45.062 330.154 46.562 plMakePlateFromTile : mjd of obs : 53973.693375 Observed HA/dec of plate center, fiducial point (deg) : -0.002 45.091 -0.001 46.591 The rotation angle of the fid. point is 179.966676 plMakePlateFromTile : beginning loop over 2052 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8227.par makePlates : plateInfo struct for plate 2557 : (h4).mjd 54132 (h4).raCen 158.573 (h4).decCen 44.3413 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 158.573 44.341 158.573 45.841 plMakePlateFromTile : mjd of obs : 54132.781310 Observed HA/dec of plate center, fiducial point (deg) : -0.002 44.299 -0.003 45.798 The rotation angle of the fid. point is -179.981458 plMakePlateFromTile : beginning loop over 1573 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8228.par makePlates : plateInfo struct for plate 2558 : (h4).mjd 54132 (h4).raCen 186 (h4).decCen 0 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 186.000 0.000 186.000 1.500 plMakePlateFromTile : mjd of obs : 54132.857232 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -0.031 -0.002 1.468 The rotation angle of the fid. point is 0.002013 plMakePlateFromTile : beginning loop over 1586 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : making a plate from ./plPlugMapT-8229.par makePlates : plateInfo struct for plate 2559 : (h4).mjd 54132 (h4).raCen 162 (h4).decCen 0 (h4).haCen 0 (h4).theta 0 (h4).tempShop 0 (h4).tempObs 5 (h4).thermalExpand 0 (h4).maxRadius 0 (h4).ZOffset 0 (h4).ZOffsetR 0 (h4).wave 0.5 (h4).obsPres 1013.25 (h4).obsRH 0.2 (h4).tropLR 0.0065 makePlates : entering C program tclMakePlateFromTile : loaded structs, calling plMakePlateFromTile plMakePlateFromTile : start plMakePlateFromTile : Starting ra/dec of plate center, fiducial point (deg) : 162.000 0.000 162.000 1.500 plMakePlateFromTile : mjd of obs : 54132.790752 Observed HA/dec of plate center, fiducial point (deg) : -0.002 -0.028 -0.003 1.471 The rotation angle of the fid. point is 0.018484 plMakePlateFromTile : beginning loop over 1529 drill objects plMakePlateFromTile : finished tclMakePlateFromTile : returned from plMakePlateFromTile makePlates : returned from C program makePlates : done with loop over plObs chain makePlates : done --------------------------------------------------------------- Sat Aug 5 15:31:36 CDT 2006 Begin running "fiberPlates -verbose=2 -skipBrightCheck" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: fiberPlates : done parsing args, starting program fiberPlates : loading chain of coherent fiber reach data (h3).id 1 (h3).xCen 199 (h3).yCen -131 (h3).rad 165 (h3).xPref 199 (h3).yPref -131 (h3).id 2 (h3).xCen 93 (h3).yCen -263 (h3).rad 165 (h3).xPref 93 (h3).yPref -263 (h3).id 3 (h3).xCen -121 (h3).yCen -263 (h3).rad 165 (h3).xPref -121 (h3).yPref -263 (h3).id 4 (h3).xCen -227 (h3).yCen -131 (h3).rad 165 (h3).xPref -227 (h3).yPref -131 (h3).id 5 (h3).xCen -199 (h3).yCen 131 (h3).rad 165 (h3).xPref -199 (h3).yPref 131 (h3).id 6 (h3).xCen -93 (h3).yCen 263 (h3).rad 165 (h3).xPref -93 (h3).yPref 263 (h3).id 7 (h3).xCen 121 (h3).yCen 263 (h3).rad 165 (h3).xPref 121 (h3).yPref 263 (h3).id 8 (h3).xCen 227 (h3).yCen 131 (h3).rad 165 (h3).xPref 227 (h3).yPref 131 (h3).id 9 (h3).xCen 14 (h3).yCen 131 (h3).rad 139.5 (h3).xPref 14 (h3).yPref 65 (h3).id 10 (h3).xCen -14 (h3).yCen -131 (h3).rad 165 (h3).xPref -14 (h3).yPref -65 (h3).id 11 (h3).xCen 93 (h3).yCen -131 (h3).rad 139.5 (h3).xPref 93 (h3).yPref -131 fiberPlates : beginning loop over plObs chain fiberPlates : fibering 10 plates fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2550.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 662 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 52 152 2 37 111 3 30 106 4 26 151 5 20 168 6 19 110 7 14 124 8 25 146 9 20 167 10 67 224 11 46 157 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6122 40 6 97 8 plFiberPlate : adding spectro-photo std with objId = 6122 40 6 94 68 plFiberPlate : adding spectro-photo std with objId = 6122 40 5 92 144 plFiberPlate : adding spectro-photo std with objId = 6122 40 2 92 63 plFiberPlate : adding spectro-photo std with objId = 6122 40 3 91 121 plFiberPlate : adding spectro-photo std with objId = 6122 40 5 90 30 plFiberPlate : adding spectro-photo std with objId = 6122 40 4 90 44 plFiberPlate : adding spectro-photo std with objId = 6122 40 2 89 87 plFiberPlate : 168 possible sky positions to use as objects from a possible 787. plFiberPlate : 125 possible sky positions to use as objects from a possible 786. plFiberPlate : 80 possible sky positions to use as objects from a possible 785. plFiberPlate : 52 possible sky positions to use as objects from a possible 784. plFiberPlate : 42 possible sky positions to use as objects from a possible 783. plFiberPlate : 56 possible sky positions to use as objects from a possible 782. plFiberPlate : 38 possible sky positions to use as objects from a possible 781. plFiberPlate : 116 possible sky positions to use as objects from a possible 780. plFiberPlate : 98 possible sky positions to use as objects from a possible 779. plFiberPlate : 70 possible sky positions to use as objects from a possible 778. plFiberPlate : 42 possible sky positions to use as objects from a possible 777. plFiberPlate : 26 possible sky positions to use as objects from a possible 776. plFiberPlate : 25 possible sky positions to use as objects from a possible 775. plFiberPlate : 21 possible sky positions to use as objects from a possible 774. plFiberPlate : 14 possible sky positions to use as objects from a possible 773. plFiberPlate : 17 possible sky positions to use as objects from a possible 772. plFiberPlate : 98 possible sky positions to use as objects from a possible 771. plFiberPlate : 81 possible sky positions to use as objects from a possible 770. plFiberPlate : 53 possible sky positions to use as objects from a possible 769. plFiberPlate : 30 possible sky positions to use as objects from a possible 768. plFiberPlate : 17 possible sky positions to use as objects from a possible 767. plFiberPlate : 15 possible sky positions to use as objects from a possible 766. plFiberPlate : 25 possible sky positions to use as objects from a possible 765. plFiberPlate : 15 possible sky positions to use as objects from a possible 764. plFiberPlate : 24 possible sky positions to use as objects from a possible 763. plFiberPlate : 46 possible sky positions to use as objects from a possible 762. plFiberPlate : 45 possible sky positions to use as objects from a possible 761. plFiberPlate : 28 possible sky positions to use as objects from a possible 760. plFiberPlate : 33 possible sky positions to use as objects from a possible 759. plFiberPlate : 30 possible sky positions to use as objects from a possible 758. plFiberPlate : 24 possible sky positions to use as objects from a possible 757. plFiberPlate : 20 possible sky positions to use as objects from a possible 756. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2550.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2550.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2551.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 61 221 2 39 162 3 39 157 4 49 220 5 22 273 6 28 150 7 29 147 8 28 218 9 41 239 10 81 304 11 55 218 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6123 40 6 23 82 plFiberPlate : adding spectro-photo std with objId = 6123 40 6 21 185 plFiberPlate : adding spectro-photo std with objId = 6123 40 5 18 100 plFiberPlate : adding spectro-photo std with objId = 6123 40 4 17 136 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 16 229 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 16 204 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 16 13 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 15 178 plFiberPlate : 216 possible sky positions to use as objects from a possible 1134. plFiberPlate : 182 possible sky positions to use as objects from a possible 1133. plFiberPlate : 115 possible sky positions to use as objects from a possible 1132. plFiberPlate : 92 possible sky positions to use as objects from a possible 1131. plFiberPlate : 60 possible sky positions to use as objects from a possible 1130. plFiberPlate : 32 possible sky positions to use as objects from a possible 1129. plFiberPlate : 72 possible sky positions to use as objects from a possible 1128. plFiberPlate : 176 possible sky positions to use as objects from a possible 1127. plFiberPlate : 136 possible sky positions to use as objects from a possible 1126. plFiberPlate : 97 possible sky positions to use as objects from a possible 1125. plFiberPlate : 34 possible sky positions to use as objects from a possible 1124. plFiberPlate : 31 possible sky positions to use as objects from a possible 1123. plFiberPlate : 17 possible sky positions to use as objects from a possible 1122. plFiberPlate : 10 possible sky positions to use as objects from a possible 1121. plFiberPlate : 45 possible sky positions to use as objects from a possible 1120. plFiberPlate : 40 possible sky positions to use as objects from a possible 1119. plFiberPlate : 141 possible sky positions to use as objects from a possible 1118. plFiberPlate : 108 possible sky positions to use as objects from a possible 1117. plFiberPlate : 59 possible sky positions to use as objects from a possible 1116. plFiberPlate : 33 possible sky positions to use as objects from a possible 1115. plFiberPlate : 43 possible sky positions to use as objects from a possible 1114. plFiberPlate : 14 possible sky positions to use as objects from a possible 1113. plFiberPlate : 23 possible sky positions to use as objects from a possible 1112. plFiberPlate : 16 possible sky positions to use as objects from a possible 1111. plFiberPlate : 20 possible sky positions to use as objects from a possible 1110. plFiberPlate : 98 possible sky positions to use as objects from a possible 1109. plFiberPlate : 57 possible sky positions to use as objects from a possible 1108. plFiberPlate : 27 possible sky positions to use as objects from a possible 1107. plFiberPlate : 12 possible sky positions to use as objects from a possible 1106. plFiberPlate : 18 possible sky positions to use as objects from a possible 1105. plFiberPlate : 26 possible sky positions to use as objects from a possible 1104. plFiberPlate : 25 possible sky positions to use as objects from a possible 1103. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 769 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2550.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2551.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2551.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2552.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 75 181 2 61 122 3 52 88 4 62 123 5 44 152 6 32 104 7 37 106 8 27 180 9 40 146 10 108 172 11 72 151 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6123 40 6 64 324 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 64 199 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 64 194 plFiberPlate : adding spectro-photo std with objId = 6123 40 2 64 115 plFiberPlate : adding spectro-photo std with objId = 6123 40 5 62 89 plFiberPlate : adding spectro-photo std with objId = 6123 40 3 62 31 plFiberPlate : adding spectro-photo std with objId = 6123 40 5 61 218 plFiberPlate : adding spectro-photo std with objId = 6123 40 4 61 73 plFiberPlate : 143 possible sky positions to use as objects from a possible 762. plFiberPlate : 99 possible sky positions to use as objects from a possible 761. plFiberPlate : 69 possible sky positions to use as objects from a possible 760. plFiberPlate : 49 possible sky positions to use as objects from a possible 759. plFiberPlate : 27 possible sky positions to use as objects from a possible 758. plFiberPlate : 60 possible sky positions to use as objects from a possible 757. plFiberPlate : 84 possible sky positions to use as objects from a possible 756. plFiberPlate : 77 possible sky positions to use as objects from a possible 755. plFiberPlate : 55 possible sky positions to use as objects from a possible 754. plFiberPlate : 43 possible sky positions to use as objects from a possible 753. plFiberPlate : 19 possible sky positions to use as objects from a possible 752. plFiberPlate : 19 possible sky positions to use as objects from a possible 751. plFiberPlate : 17 possible sky positions to use as objects from a possible 750. plFiberPlate : 26 possible sky positions to use as objects from a possible 749. plFiberPlate : 25 possible sky positions to use as objects from a possible 748. plFiberPlate : 25 possible sky positions to use as objects from a possible 747. plFiberPlate : 70 possible sky positions to use as objects from a possible 746. plFiberPlate : 76 possible sky positions to use as objects from a possible 745. plFiberPlate : 51 possible sky positions to use as objects from a possible 744. plFiberPlate : 31 possible sky positions to use as objects from a possible 743. plFiberPlate : 14 possible sky positions to use as objects from a possible 742. plFiberPlate : 15 possible sky positions to use as objects from a possible 741. plFiberPlate : 22 possible sky positions to use as objects from a possible 740. plFiberPlate : 35 possible sky positions to use as objects from a possible 739. plFiberPlate : 23 possible sky positions to use as objects from a possible 738. plFiberPlate : 60 possible sky positions to use as objects from a possible 737. plFiberPlate : 45 possible sky positions to use as objects from a possible 736. plFiberPlate : 29 possible sky positions to use as objects from a possible 735. plFiberPlate : 21 possible sky positions to use as objects from a possible 734. plFiberPlate : 16 possible sky positions to use as objects from a possible 733. plFiberPlate : 12 possible sky positions to use as objects from a possible 732. plFiberPlate : 27 possible sky positions to use as objects from a possible 731. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 810 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2551.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2552.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2552.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2553.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 114 86 2 100 69 3 69 59 4 101 79 5 106 113 6 71 84 7 67 62 8 85 74 9 93 101 10 162 112 11 112 87 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 6169 40 1 41 152 plFiberPlate : adding spectro-photo std with objId = 6169 40 1 41 132 plFiberPlate : adding spectro-photo std with objId = 6169 40 5 39 417 plFiberPlate : adding spectro-photo std with objId = 6169 40 3 39 146 plFiberPlate : adding spectro-photo std with objId = 6169 40 2 39 342 plFiberPlate : adding spectro-photo std with objId = 6169 40 2 39 34 plFiberPlate : adding spectro-photo std with objId = 6169 40 5 38 171 plFiberPlate : adding spectro-photo std with objId = 6169 40 4 37 255 plFiberPlate : 82 possible sky positions to use as objects from a possible 461. plFiberPlate : 33 possible sky positions to use as objects from a possible 460. plFiberPlate : 16 possible sky positions to use as objects from a possible 459. plFiberPlate : 31 possible sky positions to use as objects from a possible 458. plFiberPlate : 32 possible sky positions to use as objects from a possible 457. plFiberPlate : 10 possible sky positions to use as objects from a possible 456. plFiberPlate : 26 possible sky positions to use as objects from a possible 455. plFiberPlate : 53 possible sky positions to use as objects from a possible 454. plFiberPlate : 34 possible sky positions to use as objects from a possible 453. plFiberPlate : 20 possible sky positions to use as objects from a possible 452. plFiberPlate : 13 possible sky positions to use as objects from a possible 451. plFiberPlate : 5 possible sky positions to use as objects from a possible 450. plFiberPlate : 14 possible sky positions to use as objects from a possible 449. plFiberPlate : 6 possible sky positions to use as objects from a possible 448. plFiberPlate : 7 possible sky positions to use as objects from a possible 447. plFiberPlate : 10 possible sky positions to use as objects from a possible 446. plFiberPlate : 70 possible sky positions to use as objects from a possible 445. plFiberPlate : 54 possible sky positions to use as objects from a possible 444. plFiberPlate : 32 possible sky positions to use as objects from a possible 443. plFiberPlate : 22 possible sky positions to use as objects from a possible 442. plFiberPlate : 10 possible sky positions to use as objects from a possible 441. plFiberPlate : 11 possible sky positions to use as objects from a possible 440. plFiberPlate : 17 possible sky positions to use as objects from a possible 439. plFiberPlate : 13 possible sky positions to use as objects from a possible 438. plFiberPlate : 13 possible sky positions to use as objects from a possible 437. plFiberPlate : 35 possible sky positions to use as objects from a possible 436. plFiberPlate : 31 possible sky positions to use as objects from a possible 435. plFiberPlate : 26 possible sky positions to use as objects from a possible 434. plFiberPlate : 14 possible sky positions to use as objects from a possible 433. plFiberPlate : 10 possible sky positions to use as objects from a possible 432. plFiberPlate : 17 possible sky positions to use as objects from a possible 431. plFiberPlate : 11 possible sky positions to use as objects from a possible 430. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 805 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2552.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2553.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2553.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2554.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 44 26 2 59 15 3 71 16 4 107 29 5 108 50 6 63 41 7 56 30 8 64 29 9 66 36 10 139 32 11 74 21 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 6162 40 4 266 140 plFiberPlate : adding spectro-photo std with objId = 6162 40 4 269 387 plFiberPlate : adding spectro-photo std with objId = 6162 40 3 274 266 plFiberPlate : adding spectro-photo std with objId = 6162 40 4 277 137 plFiberPlate : adding spectro-photo std with objId = 6162 40 6 279 167 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 277 297 plFiberPlate : adding spectro-photo std with objId = 6162 40 1 278 736 plFiberPlate : adding spectro-photo std with objId = 6182 40 2 27 128 plFiberPlate : 24 possible sky positions to use as objects from a possible 172. plFiberPlate : 15 possible sky positions to use as objects from a possible 171. plFiberPlate : 5 possible sky positions to use as objects from a possible 170. plFiberPlate : 2 possible sky positions to use as objects from a possible 169. plFiberPlate : 8 possible sky positions to use as objects from a possible 168. plFiberPlate : 1 possible sky positions to use as objects from a possible 167. plFiberPlate : 10 possible sky positions to use as objects from a possible 166. plFiberPlate : 22 possible sky positions to use as objects from a possible 165. plFiberPlate : 12 possible sky positions to use as objects from a possible 164. plFiberPlate : 8 possible sky positions to use as objects from a possible 163. plFiberPlate : 7 possible sky positions to use as objects from a possible 162. plFiberPlate : 1 possible sky positions to use as objects from a possible 161. plFiberPlate : 5 possible sky positions to use as objects from a possible 160. plFiberPlate : 3 possible sky positions to use as objects from a possible 159. plFiberPlate : 1 possible sky positions to use as objects from a possible 158. plFiberPlate : 9 possible sky positions to use as objects from a possible 157. plFiberPlate : 19 possible sky positions to use as objects from a possible 156. plFiberPlate : 12 possible sky positions to use as objects from a possible 155. plFiberPlate : 5 possible sky positions to use as objects from a possible 154. plFiberPlate : 3 possible sky positions to use as objects from a possible 153. plFiberPlate : 5 possible sky positions to use as objects from a possible 152. plFiberPlate : 2 possible sky positions to use as objects from a possible 151. plFiberPlate : 0 possible sky positions to use as objects from a possible 150. plFiberPlate: No sky found for bundle at 141.502 102.405, increase box by 10 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 150. plFiberPlate: No sky found for bundle at 141.502 102.405, increase box by 20 percent. plFiberPlate : 0 possible sky positions to use as objects from a possible 150. plFiberPlate: No sky found for bundle at 141.502 102.405, increase box by 30 percent. plFiberPlate : 1 possible sky positions to use as objects from a possible 150. plFiberPlate : 4 possible sky positions to use as objects from a possible 149. plFiberPlate : 5 possible sky positions to use as objects from a possible 148. plFiberPlate : 24 possible sky positions to use as objects from a possible 147. plFiberPlate : 15 possible sky positions to use as objects from a possible 146. plFiberPlate : 10 possible sky positions to use as objects from a possible 145. plFiberPlate : 6 possible sky positions to use as objects from a possible 144. plFiberPlate : 5 possible sky positions to use as objects from a possible 143. plFiberPlate : 5 possible sky positions to use as objects from a possible 142. plFiberPlate : 4 possible sky positions to use as objects from a possible 141. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 849 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2553.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2554.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2554.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2555.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 2 237 2 2 188 3 4 165 4 5 205 5 2 240 6 3 184 7 2 174 8 2 203 9 1 210 10 6 295 11 2 216 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate: No obj found for coherent fiber 11 at 93.000 -131.000 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 6182 40 2 62 774 plFiberPlate : adding spectro-photo std with objId = 6162 40 1 313 663 plFiberPlate : adding spectro-photo std with objId = 6182 40 3 58 331 plFiberPlate : adding spectro-photo std with objId = 6182 40 5 62 140 plFiberPlate : adding spectro-photo std with objId = 6162 40 5 318 222 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 61 165 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 54 537 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 56 642 plFiberPlate : 181 possible sky positions to use as objects from a possible 1152. plFiberPlate : 137 possible sky positions to use as objects from a possible 1151. plFiberPlate : 109 possible sky positions to use as objects from a possible 1150. plFiberPlate : 95 possible sky positions to use as objects from a possible 1149. plFiberPlate : 82 possible sky positions to use as objects from a possible 1148. plFiberPlate : 137 possible sky positions to use as objects from a possible 1147. plFiberPlate : 185 possible sky positions to use as objects from a possible 1146. plFiberPlate : 125 possible sky positions to use as objects from a possible 1145. plFiberPlate : 113 possible sky positions to use as objects from a possible 1144. plFiberPlate : 90 possible sky positions to use as objects from a possible 1143. plFiberPlate : 52 possible sky positions to use as objects from a possible 1142. plFiberPlate : 18 possible sky positions to use as objects from a possible 1141. plFiberPlate : 26 possible sky positions to use as objects from a possible 1140. plFiberPlate : 13 possible sky positions to use as objects from a possible 1139. plFiberPlate : 27 possible sky positions to use as objects from a possible 1138. plFiberPlate : 17 possible sky positions to use as objects from a possible 1137. plFiberPlate : 152 possible sky positions to use as objects from a possible 1136. plFiberPlate : 91 possible sky positions to use as objects from a possible 1135. plFiberPlate : 73 possible sky positions to use as objects from a possible 1134. plFiberPlate : 38 possible sky positions to use as objects from a possible 1133. plFiberPlate : 20 possible sky positions to use as objects from a possible 1132. plFiberPlate : 15 possible sky positions to use as objects from a possible 1131. plFiberPlate : 25 possible sky positions to use as objects from a possible 1130. plFiberPlate : 30 possible sky positions to use as objects from a possible 1129. plFiberPlate : 45 possible sky positions to use as objects from a possible 1128. plFiberPlate : 60 possible sky positions to use as objects from a possible 1127. plFiberPlate : 49 possible sky positions to use as objects from a possible 1126. plFiberPlate : 41 possible sky positions to use as objects from a possible 1125. plFiberPlate : 24 possible sky positions to use as objects from a possible 1124. plFiberPlate : 18 possible sky positions to use as objects from a possible 1123. plFiberPlate : 19 possible sky positions to use as objects from a possible 1122. plFiberPlate : 25 possible sky positions to use as objects from a possible 1121. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 801 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2554.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2555.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2555.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2556.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 49 173 2 55 136 3 67 119 4 98 139 5 108 149 6 99 115 7 92 108 8 78 142 9 97 139 10 150 193 11 63 152 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 415 240 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 426 498 plFiberPlate : adding spectro-photo std with objId = 6182 40 3 178 646 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 419 1409 plFiberPlate : adding spectro-photo std with objId = 6182 40 6 167 1508 plFiberPlate : adding spectro-photo std with objId = 6182 40 4 171 1395 plFiberPlate : adding spectro-photo std with objId = 6182 40 6 163 244 plFiberPlate : adding spectro-photo std with objId = 6162 40 2 422 1594 plFiberPlate : 122 possible sky positions to use as objects from a possible 783. plFiberPlate : 101 possible sky positions to use as objects from a possible 782. plFiberPlate : 50 possible sky positions to use as objects from a possible 781. plFiberPlate : 45 possible sky positions to use as objects from a possible 780. plFiberPlate : 23 possible sky positions to use as objects from a possible 779. plFiberPlate : 49 possible sky positions to use as objects from a possible 778. plFiberPlate : 63 possible sky positions to use as objects from a possible 777. plFiberPlate : 81 possible sky positions to use as objects from a possible 776. plFiberPlate : 66 possible sky positions to use as objects from a possible 775. plFiberPlate : 75 possible sky positions to use as objects from a possible 774. plFiberPlate : 40 possible sky positions to use as objects from a possible 773. plFiberPlate : 27 possible sky positions to use as objects from a possible 772. plFiberPlate : 18 possible sky positions to use as objects from a possible 771. plFiberPlate : 10 possible sky positions to use as objects from a possible 770. plFiberPlate : 20 possible sky positions to use as objects from a possible 769. plFiberPlate : 69 possible sky positions to use as objects from a possible 768. plFiberPlate : 64 possible sky positions to use as objects from a possible 767. plFiberPlate : 57 possible sky positions to use as objects from a possible 766. plFiberPlate : 49 possible sky positions to use as objects from a possible 765. plFiberPlate : 23 possible sky positions to use as objects from a possible 764. plFiberPlate : 27 possible sky positions to use as objects from a possible 763. plFiberPlate : 13 possible sky positions to use as objects from a possible 762. plFiberPlate : 7 possible sky positions to use as objects from a possible 761. plFiberPlate : 10 possible sky positions to use as objects from a possible 760. plFiberPlate : 18 possible sky positions to use as objects from a possible 759. plFiberPlate : 42 possible sky positions to use as objects from a possible 758. plFiberPlate : 35 possible sky positions to use as objects from a possible 757. plFiberPlate : 22 possible sky positions to use as objects from a possible 756. plFiberPlate : 11 possible sky positions to use as objects from a possible 755. plFiberPlate : 6 possible sky positions to use as objects from a possible 754. plFiberPlate : 11 possible sky positions to use as objects from a possible 753. plFiberPlate : 17 possible sky positions to use as objects from a possible 752. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 868 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2555.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2556.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2556.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2557.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 19 163 2 14 123 3 10 136 4 9 170 5 9 169 6 7 116 7 5 130 8 7 159 9 9 180 10 21 246 11 15 162 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 3530 42 1 263 14 plFiberPlate : adding spectro-photo std with objId = 3530 42 2 255 28 plFiberPlate : adding spectro-photo std with objId = 3698 41 6 52 52 plFiberPlate : adding spectro-photo std with objId = 3698 41 2 50 56 plFiberPlate : adding spectro-photo std with objId = 3698 41 4 48 119 plFiberPlate : adding spectro-photo std with objId = 3698 41 6 45 4 plFiberPlate : adding spectro-photo std with objId = 3698 41 4 39 110 plFiberPlate : adding spectro-photo std with objId = 3698 41 5 38 67 plFiberPlate : 194 possible sky positions to use as objects from a possible 844. plFiberPlate : 128 possible sky positions to use as objects from a possible 843. plFiberPlate : 76 possible sky positions to use as objects from a possible 842. plFiberPlate : 44 possible sky positions to use as objects from a possible 841. plFiberPlate : 52 possible sky positions to use as objects from a possible 840. plFiberPlate : 46 possible sky positions to use as objects from a possible 839. plFiberPlate : 55 possible sky positions to use as objects from a possible 838. plFiberPlate : 105 possible sky positions to use as objects from a possible 837. plFiberPlate : 91 possible sky positions to use as objects from a possible 836. plFiberPlate : 69 possible sky positions to use as objects from a possible 835. plFiberPlate : 57 possible sky positions to use as objects from a possible 834. plFiberPlate : 23 possible sky positions to use as objects from a possible 833. plFiberPlate : 10 possible sky positions to use as objects from a possible 832. plFiberPlate : 21 possible sky positions to use as objects from a possible 831. plFiberPlate : 28 possible sky positions to use as objects from a possible 830. plFiberPlate : 20 possible sky positions to use as objects from a possible 829. plFiberPlate : 112 possible sky positions to use as objects from a possible 828. plFiberPlate : 100 possible sky positions to use as objects from a possible 827. plFiberPlate : 65 possible sky positions to use as objects from a possible 826. plFiberPlate : 40 possible sky positions to use as objects from a possible 825. plFiberPlate : 13 possible sky positions to use as objects from a possible 824. plFiberPlate : 24 possible sky positions to use as objects from a possible 823. plFiberPlate : 26 possible sky positions to use as objects from a possible 822. plFiberPlate : 23 possible sky positions to use as objects from a possible 821. plFiberPlate : 23 possible sky positions to use as objects from a possible 820. plFiberPlate : 38 possible sky positions to use as objects from a possible 819. plFiberPlate : 32 possible sky positions to use as objects from a possible 818. plFiberPlate : 27 possible sky positions to use as objects from a possible 817. plFiberPlate : 21 possible sky positions to use as objects from a possible 816. plFiberPlate : 12 possible sky positions to use as objects from a possible 815. plFiberPlate : 24 possible sky positions to use as objects from a possible 814. plFiberPlate : 30 possible sky positions to use as objects from a possible 813. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 722 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2556.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2557.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2557.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2558.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 26 174 2 16 122 3 16 110 4 17 147 5 15 174 6 8 124 7 6 122 8 11 176 9 6 187 10 28 242 11 25 164 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 752 40 2 290 66 plFiberPlate : adding spectro-photo std with objId = 752 40 4 284 93 plFiberPlate : adding spectro-photo std with objId = 752 40 5 282 82 plFiberPlate : adding spectro-photo std with objId = 752 40 3 280 13 plFiberPlate : adding spectro-photo std with objId = 752 40 1 279 30 plFiberPlate : adding spectro-photo std with objId = 752 40 3 278 81 plFiberPlate : adding spectro-photo std with objId = 752 40 6 277 58 plFiberPlate : adding spectro-photo std with objId = 752 40 6 277 34 plFiberPlate : 192 possible sky positions to use as objects from a possible 844. plFiberPlate : 120 possible sky positions to use as objects from a possible 843. plFiberPlate : 57 possible sky positions to use as objects from a possible 842. plFiberPlate : 54 possible sky positions to use as objects from a possible 841. plFiberPlate : 47 possible sky positions to use as objects from a possible 840. plFiberPlate : 49 possible sky positions to use as objects from a possible 839. plFiberPlate : 42 possible sky positions to use as objects from a possible 838. plFiberPlate : 116 possible sky positions to use as objects from a possible 837. plFiberPlate : 90 possible sky positions to use as objects from a possible 836. plFiberPlate : 60 possible sky positions to use as objects from a possible 835. plFiberPlate : 28 possible sky positions to use as objects from a possible 834. plFiberPlate : 18 possible sky positions to use as objects from a possible 833. plFiberPlate : 26 possible sky positions to use as objects from a possible 832. plFiberPlate : 25 possible sky positions to use as objects from a possible 831. plFiberPlate : 24 possible sky positions to use as objects from a possible 830. plFiberPlate : 20 possible sky positions to use as objects from a possible 829. plFiberPlate : 101 possible sky positions to use as objects from a possible 828. plFiberPlate : 91 possible sky positions to use as objects from a possible 827. plFiberPlate : 70 possible sky positions to use as objects from a possible 826. plFiberPlate : 44 possible sky positions to use as objects from a possible 825. plFiberPlate : 24 possible sky positions to use as objects from a possible 824. plFiberPlate : 24 possible sky positions to use as objects from a possible 823. plFiberPlate : 21 possible sky positions to use as objects from a possible 822. plFiberPlate : 26 possible sky positions to use as objects from a possible 821. plFiberPlate : 19 possible sky positions to use as objects from a possible 820. plFiberPlate : 84 possible sky positions to use as objects from a possible 819. plFiberPlate : 70 possible sky positions to use as objects from a possible 818. plFiberPlate : 43 possible sky positions to use as objects from a possible 817. plFiberPlate : 21 possible sky positions to use as objects from a possible 816. plFiberPlate : 21 possible sky positions to use as objects from a possible 815. plFiberPlate : 32 possible sky positions to use as objects from a possible 814. plFiberPlate : 33 possible sky positions to use as objects from a possible 813. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 692 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2557.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2558.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2558.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : fibering plate /opdb/d1/data/drillRuns/dr2006.08.1/plPlugMapP-2559.par fiberPlates : entering C program tclFiberPlate : start tclFiberPlate :finished loading data, starting plFiberPlate plFiberPlate : starting plFiberPlate : adding sky number 330 to list of science objects plFiberPlate : adding sky number 656 to list of science objects plFiberPlate : adding sky number 668 to list of science objects plFiberPlate : adding sky number 762 to list of science objects plFiberPlate : adding sky number 164 to list of science objects plFiberPlate : adding sky number 279 to list of science objects plFiberPlate : adding sky number 639 to list of science objects plFiberPlate : adding sky number 231 to list of science objects plFiberPlate : adding sky number 460 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 521 to list of science objects plFiberPlate : adding sky number 302 to list of science objects plFiberPlate : adding sky number 424 to list of science objects plFiberPlate : adding sky number 786 to list of science objects plFiberPlate : adding sky number 755 to list of science objects plFiberPlate : adding sky number 523 to list of science objects plFiberPlate : adding sky number 590 to list of science objects plFiberPlate : adding sky number 116 to list of science objects plFiberPlate : adding sky number 498 to list of science objects plFiberPlate : adding sky number 13 to list of science objects plFiberPlate : adding sky number 198 to list of science objects plFiberPlate : adding sky number 112 to list of science objects plFiberPlate : adding sky number 657 to list of science objects plFiberPlate : adding sky number 127 to list of science objects plFiberPlate : adding sky number 326 to list of science objects plFiberPlate : adding sky number 105 to list of science objects plFiberPlate : adding sky number 88 to list of science objects plFiberPlate : adding sky number 811 to list of science objects plFiberPlate : adding sky number 177 to list of science objects plFiberPlate : adding sky number 415 to list of science objects plFiberPlate : adding sky number 678 to list of science objects plFiberPlate : adding sky number 495 to list of science objects plFiberPlate : adding sky number 238 to list of science objects plFiberPlate : adding sky number 513 to list of science objects plFiberPlate : adding sky number 422 to list of science objects plFiberPlate : adding sky number 396 to list of science objects plFiberPlate : adding sky number 781 to list of science objects plFiberPlate : adding sky number 234 to list of science objects plFiberPlate : adding sky number 617 to list of science objects plFiberPlate : adding sky number 421 to list of science objects plFiberPlate : adding sky number 615 to list of science objects plFiberPlate : adding sky number 319 to list of science objects plFiberPlate : adding sky number 710 to list of science objects plFiberPlate : adding sky number 225 to list of science objects plFiberPlate : adding sky number 280 to list of science objects plFiberPlate : adding sky number 641 to list of science objects plFiberPlate : adding sky number 728 to list of science objects plFiberPlate : adding sky number 55 to list of science objects plFiberPlate : adding sky number 750 to list of science objects plFiberPlate : adding sky number 415 to list of science objects plFiberPlate : adding sky number 67 to list of science objects plFiberPlate : adding sky number 151 to list of science objects plFiberPlate : adding sky number 521 to list of science objects plFiberPlate : adding sky number 699 to list of science objects plFiberPlate : adding sky number 273 to list of science objects plFiberPlate : adding sky number 50 to list of science objects plFiberPlate : adding sky number 15 to list of science objects plFiberPlate : adding sky number 357 to list of science objects plFiberPlate : adding sky number 49 to list of science objects plFiberPlate : adding sky number 185 to list of science objects plFiberPlate : adding sky number 756 to list of science objects plFiberPlate : adding sky number 701 to list of science objects plFiberPlate : adding sky number 661 to list of science objects plFiberPlate : adding sky number 206 to list of science objects plFiberPlate : ready to pick coherent fiber targets plFiberPlate : picking C.Sky locations plFiberPlate : fiber number, # of possible objects or # of alternate objects plFiberPlate : magnitude weighted by 0.00, distance by 1.00 plFiberPlate : picking guide stars plFiberPlate : fiber number, # of possible objects or # of alternate objects 1 24 163 2 15 115 3 14 105 4 20 150 5 15 158 6 17 105 7 15 102 8 13 148 9 17 151 10 27 223 11 21 160 plFiberPlate : magnitude weighted by 0.50, distance by 0.50 plFiberPlate : done with coherent fiber selection plFiberPlate : starting science fiber assigment plFiberPlate : 2 spectro-photo stds added to zone 1 plFiberPlate : 2 spectro-photo stds added to zone 2 plFiberPlate : 2 spectro-photo stds added to zone 3 plFiberPlate : 2 spectro-photo stds added to zone 4 plFiberPlate : adding spectro-photo std with objId = 756 44 5 306 31 plFiberPlate : adding spectro-photo std with objId = 756 44 2 302 47 plFiberPlate : adding spectro-photo std with objId = 2141 40 6 136 29 plFiberPlate : adding spectro-photo std with objId = 2141 40 3 136 30 plFiberPlate : adding spectro-photo std with objId = 2141 40 1 128 55 plFiberPlate : adding spectro-photo std with objId = 2141 40 1 125 2 plFiberPlate : adding spectro-photo std with objId = 2141 40 5 122 69 plFiberPlate : adding spectro-photo std with objId = 2141 40 4 122 122 plFiberPlate : 172 possible sky positions to use as objects from a possible 775. plFiberPlate : 120 possible sky positions to use as objects from a possible 774. plFiberPlate : 85 possible sky positions to use as objects from a possible 773. plFiberPlate : 54 possible sky positions to use as objects from a possible 772. plFiberPlate : 66 possible sky positions to use as objects from a possible 771. plFiberPlate : 26 possible sky positions to use as objects from a possible 770. plFiberPlate : 77 possible sky positions to use as objects from a possible 769. plFiberPlate : 102 possible sky positions to use as objects from a possible 768. plFiberPlate : 86 possible sky positions to use as objects from a possible 767. plFiberPlate : 56 possible sky positions to use as objects from a possible 766. plFiberPlate : 32 possible sky positions to use as objects from a possible 765. plFiberPlate : 24 possible sky positions to use as objects from a possible 764. plFiberPlate : 26 possible sky positions to use as objects from a possible 763. plFiberPlate : 20 possible sky positions to use as objects from a possible 762. plFiberPlate : 18 possible sky positions to use as objects from a possible 761. plFiberPlate : 33 possible sky positions to use as objects from a possible 760. plFiberPlate : 91 possible sky positions to use as objects from a possible 759. plFiberPlate : 74 possible sky positions to use as objects from a possible 758. plFiberPlate : 62 possible sky positions to use as objects from a possible 757. plFiberPlate : 34 possible sky positions to use as objects from a possible 756. plFiberPlate : 25 possible sky positions to use as objects from a possible 755. plFiberPlate : 17 possible sky positions to use as objects from a possible 754. plFiberPlate : 37 possible sky positions to use as objects from a possible 753. plFiberPlate : 17 possible sky positions to use as objects from a possible 752. plFiberPlate : 15 possible sky positions to use as objects from a possible 751. plFiberPlate : 65 possible sky positions to use as objects from a possible 750. plFiberPlate : 52 possible sky positions to use as objects from a possible 749. plFiberPlate : 26 possible sky positions to use as objects from a possible 748. plFiberPlate : 20 possible sky positions to use as objects from a possible 747. plFiberPlate : 21 possible sky positions to use as objects from a possible 746. plFiberPlate : 17 possible sky positions to use as objects from a possible 745. plFiberPlate : 16 possible sky positions to use as objects from a possible 744. plFiberPlate : done, returning chain to fibered plugMap tclFiberPlate : plFiberPlate returned 697 length chain tclFiberPlate : end fiberPlates : returned from C program fiberPlates : starting to write plOverlay plot, possible pgPlot output following Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2558.ps/CPS Open /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2559.ps/CPS Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Starting OBJECT CHAIN 640 starting GUIDE chain starting QUALITY chain starting COHERENT_SKY chain starting LIGHT_TRAP chain Close /opdb/d1/data/drillRuns/dr2006.08.1/plOverlay-2559.ps/CPS fiberPlates : wrote plOverlay, done with possible pgPlot output fiberPlates : done with loop over plObs chain fiberPlates : done --------------------------------------------------------------- Sat Aug 5 15:32:02 CDT 2006 Begin running "makeFanuc -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeFanuc : done parsing args, starting program makeFanuc : beginning loop over plObs chain making 10 fanuc files makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2550.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2550.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (6.0424,-10.9867) and (-0.03,-11.78) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2550.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 107 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2551.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2551.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2551.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 148 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2552.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2552.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2552.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 143 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2553.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2553.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2553.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 187 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2554.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2554.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : fixed path between (11.4349,5.1444) and (12.19,2.80) plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2554.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 1 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 139 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2555.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2555.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2555.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 206 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2556.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2556.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2556.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 60 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2557.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2557.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2557.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 30 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2558.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2558.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2558.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : calling C program to minimize path tclplDrillPath : start tclplDrillPath : done parsing args, proceeding to sort chain tclplDrillPath: Placing Center hole in LIGHT_TRAP chain tclplDrillPath : done, split input chain into 3 chains : with 651 (obj/q/guide), 35 (light traps), 11 (alignment) tclplDrillPath : running plAnneal on object positions tclplDrillPath : finished annealing object drillpath tclplDrillPath : running plAnneal on light trap positions tclplDrillPath : finished annealing light trap drillpath tclplDrillPath : running plAnneal on alignment positions tclplDrillPath : finished annealling alignment hole path tclplDrillPath : finished annealing paths, now resorting tclplDrillPath : finished sorted chains, binding handles tclplDrillPath : done makeFanuc : returned from C program to minimize path makeFanuc : calling C program to write codes tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2559.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2559.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished tclFanucCode : starting tclFanucCode : calling plMakeFanucCodes plMakeFanucCodes : starting plMakeFanucCodes : opening file /opdb/d1/data/drillRuns/dr2006.08.1/plFanuc-2559.par plMakeFanucCodes : temperature difference 15.0 deg C plMakeFanucCodes : using a temp expansion factor of 0.00031860 plMakeFanucCodes : calculating drill positions plMakeFanucCodes : finished calculating hole postions plMakeFanucCodes : ready to start writing to file plMakeFanucCodes : finished tclFanucCode : returned from plMakeFanucCodes tclFanucCode : finished makeFanuc : plMakeFanucCodes reports 0 paths fixed makeFanuc : done --------------------------------------------------------------- Sat Aug 5 15:32:34 CDT 2006 Begin running "makeDrillPos -verbose=2" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: makeDrillPos : done parsing args, starting program makeDrillPos : running with verbose level 2 makeDrillPos : loading plate distort structs makeDrillPos : distortion struct for flattening distortion: (h3).parity 1 (h3).scale 1 (h3).xCenter 0 (h3).yCenter 0 (h3).coeff 0xa7ef344 makeDrillPos : beginning loop over plObs chain; makeDrillPos : examining 10 plates makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2550 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2551 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 769 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2552 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 810 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2553 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 805 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2554 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 849 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2555 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 801 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2556 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 868 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2557 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 722 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2558 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 692 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : calling C program makeDrillPos : plateInfo for plate 2559 : (h5).mjd 0 (h5).raCen 0 (h5).decCen 0 (h5).haCen 0 (h5).theta 0 (h5).tempShop 20 (h5).tempObs 5 (h5).thermalExpand 2.124e-05 (h5).maxRadius 0 (h5).ZOffset 0 (h5).ZOffsetR 0 (h5).wave 0 (h5).obsPres 0 (h5).obsRH 0 (h5).tropLR 0 tclMakeMeasCoords : finished parsing args & loading structs, tclMakeMeasCoords : calling plMakeMeasCoords plMakeMeasCoords : starting plMakeMeasCoords : looping over 697 element plugMap chain plMakeMeasCoords : finished, returning DRILLPOS chain tclMakeMeasCoords : returned from plMakeMeasCoords tclMakeMeasCoords : done makeDrillPos : returned from C program makeDrillPos : writing drillpos par file makeDrillPos : preparing to write formatted measurement file makeDrillPos : finshed writing measurement file makeDrillPos : finished looping over plObs chain makeDrillPos : done Done running plate --------------------------------------------------------------- Sat Aug 5 15:32:49 CDT 2006 Begin running "plateEnder dr2006.08.1 -morePipes 1" Executing commands in /sdss/ups/prd/dervish/v8_18/Linux-2-4-2-3-2/etc/dervishStartup.tcl: Executing commands in /sdss/ups/prd/dp/v18_49/NULL/etc/dpStartup.tcl: loading DP scripts from /sdss/ups/prd/dp/v18_49/NULL Executing commands in /sdss/ups/prd/nfcalib/v2_2/NULL/etc/nfcalibStartup.tcl: loading NFCALIB scripts Executing commands in /sdss/ups/prd/astrotools/v5_21/Linux-2-4-2-3-2/etc/astrotoolsStartup.tcl Executing commands in /sdss/ups/prd/plate/v3_8/Linux-2-4-2-3-2/etc/plateStartup.tcl: SUCCESS of status_plate FAILURE of qc_plate qc_plate reports bad plates Error: "plateEnder dr2006.08.1 -morePipes 1" failed. PS: Read file for stderr output of this job.